BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15361 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11041

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 303 (1989)

Plywood for General Purposes -

MR/BWR

4750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	4750	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	4750	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	4750	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	4750	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	4750	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	4750	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	4750	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	4750	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	4750	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	4750	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	4750	-
11.3(Moisture Content - Part 1 of IS 1734)	-	4750	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	4750	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	4750	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	4750	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	4750	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	4750	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	4750	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	4750	-
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	4750	-

30 Mar, 2027

-
-

11042

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

2.0-10,00 MM

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 AND AS PER IS 7887(CARBON)	-	6500	-
6 AND AS PER IS 7887(SILICON)	-	6500	-
6 AND AS PER IS 7887(MANGANESE)	-	6500	-
6 AND AS PER IS 7887(PHOSPHORUS)	-	6500	-
6 AND AS PER IS 7887(ALUMINIUM)	-	6500	-
6 AND AS PER IS 7887(SULPHUR)	-	6500	-
9.2(Wrapping Test)	-	6500	-
Cl 11(Workmanship)	-	6500	-
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	6500	-
Cl 9(Tensile Test On UTM)	-	6500	-
Clause 6 and Note 3 of IS 7887(Copper)	-	6500	-
9.3(Bend test)	-	6500	-
11(Coating test)	-	6500	-

30 Mar, 2027

-
-

11043

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 205 (1992)

Non - Ferrous metal butt specification (Fourth Revision)

HING DESIGNATION AS PER TABLE 2-5

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	6000	-
5.1- Table 2,3,4,5 & Fig-1 & 2(Dimensions- Type of Hinge 1.Length 2.Breadth 3.Butt Dia 4.Pin Dia 5.Thickness of Flap)	-	6000	-
6.2- Table 2,3,4,5 (Kunckles)	-	6000	-
6.3(Screw Holes)	-	6000	-

30 Mar, 2027

-
-

11044

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 204 : Part 2 (1992)

Tower bolts - Specification: Part 2 non - Ferrous metals (Fifth Revision)

TYPE AS PER CL.3 AND SIZE AS PER TABLE 1-2

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General)	-	6000	-
4 -Table 3- i (Ref. Cl 8 , Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Copper - IS 504)	-	6000	-
4 -Table 3- i (Ref. Cl 8, Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Aluminium - IS 504)	-	6000	-
4 -Table 3- i (Ref. Cl 8, Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Magnesium - IS 504)	-	6000	-
4 -Table 3- i (Ref. Cl 8, Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Silicon - IS 504)	-	6000	-
4 -Table 3- i (Ref. Cl 8 , Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Iron - IS 504)	-	6000	-
4 -Table 3- i (Ref. Cl 8, Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Manganese - IS 504)	-	6000	-
4 -Table 3- i (Ref. Cl 8, Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Zinc - IS 504)	-	6000	-
4 -Table 3- i (Ref. Cl 8 , Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Titanium - IS 504)	-	6000	-
4 -Table 3- i (Ref. Cl 8, Table 1 Designation 63400 of IS 1285 : 2002)(Chemical composition - Chromium - IS 504)	-	6000	-
4 -Table 3- iii (Ref. Cl 6.1 , Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Lead - IS 3635:1966)	-	6000	-
4 -Table 3- iii (Ref. Cl 6.1 , Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Copper - IS 3635:1966)	-	6000	-
6.1- Table 1(Dimension of Barrel tower bolts-1.Size 2.Length of Bolt or Barrel-(A or B) 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Metal of Barrel (Brass or Zink Alloy/Aluminium alloy/Sheet Brass)-F 8.Dia of bore of barrel or socket- G )	-	6000	-
6.2- Table 2(Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt -A 3.Length of Bolt Plate -B 4.Width of Bolt Plate or Staple-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Socket (Brass /Aluminium alloy or Zink Alloy)-F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob )	-	6000	-
7(Finish)	-	6000	-
4 -Table 3- iii (Ref. Cl 6.1, Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Iron - IS 3635:1966)	-	6000	-
4 -Table 3- iii (Ref. Cl 6.1, Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Total impurities (including Iron) - IS 3635:1966)	-	6000	-
4 -Table 3- iii (Ref. Cl 6.1, Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Zinc - IS 3635:1966)	-	6000	-
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Copper plus incidental nickel - IS 3685:1966)	-	6000	-
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Nickel - IS 3685:1966)	-	6000	-
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Tin - IS 3685:1966)	-	6000	-
4 -Table 3- iv (Ref. Cl 3.1, Table 1 Grade CB-2 of IS 292 : 1983)(Chemical composition - Aluminium - IS 3685:1966)	-	6000	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Aluminium- IS 2600:1964)	-	6000	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Magnesium- IS 2600:1964)	-	6000	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Copper- IS 2600:1964)	-	6000	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Iron- IS 2600:1964)	-	6000	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Lead- IS 2600:1964)	-	6000	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Cadmium- IS 2600:1964)	-	6000	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Tin- IS 2600:1964)	-	6000	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Zinc- IS 2600:1964)	-	6000	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Nickel- IS 2600:1964)	-	6000	-
4 -Table 3- vi (Ref. Cl 4.1, Table 1 Alloy ZnAl4 of IS 742 : 1981)(Chemical composition - Impurities-Thallium and Indium- IS 2600:1964)	-	6000	-

30 Mar, 2027

-
-

11045

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 204 : Part 1 (1991)

Tower bolts - Specification: Part 1 ferrous metals (Fifth Revision)

TYPE AS PER CL.3 & SIZE AS PER TABLE 1, 2, 3

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Carbon - IS 228)	-	5000	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Manganese - IS 228)	-	5000	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Phosphorus - IS 228)	-	5000	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Sulphur - IS 228)	-	5000	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Silicon - IS 228)	-	5000	-
4 -Table 5- iii (Ref. Cl 6.1 of IS 210 : 2009)(Chemical composition - Sulphur and/or Phosphorous)	-	5000	-
5.1(General)	-	5000	-
6.1- Table 1(Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-	5000	-
7(Finish)	-	5000	-

30 Mar, 2027

-
-

11046

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 17861 (2022)

TEXTILE BOOTS WITH POLYMERIC SOLE JUNGLE BOOTS - SPECIFICATION Third Revision

53200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-5.1(Design)	-	300	-
Clause-5.2(Size and Fitting)	-	300	-
Clause-5.3(Height of Upper)	-	300	-
Clause-5.4(Weight)	-	300	-
Clause-5.5.1(Construction)	-	300	-
Clause-5.5.2(Upper – Outsole Bond Strength)	-	300	-
Clause-5.5.3(Consolidation Test (For Type 1 and Type 2))	-	300	-
Clause-5.5.4(Ergonomic Features)	-	500	-
Clause-5.5.5(Slip Resistance)	-	1500	-
Clause-5.5.6(Energy Absorption of Seat Region)	-	500	-
Clause-5.5.7(Water Resistance)	-	500	-
Clause-5.6.1(Penetration Resistance)	-	500	-
Clause-5.6.2(Electrical Resistance (Antistatic))	-	1500	-
Clause-5.6.3(Heat Insulation of Sole Complex)	-	500	-
Clause-5.6.4(Cold Insulation of Sole Complex)	-	1500	-
Clause-5.7.1(Material)	-	500	-
Clause-5.7.2(Tear Strength)	-	500	-
Clause-5.7.3(Water Vapour Permeability and Coefficient)	-	500	-
Clause-5.7.4(Colour Fastness: Light)	-	500	-
Clause-5.7.4(Colour Fastness:Washing)	-	500	-
Clause-5.8.2(Tear Strength)	-	500	-
Clause-5.8.3(Abrasion Resistance)	-	500	-
Clause-5.8.4(Water Vapour Permeability and Coefficient)	-	800	-
Clause-5.10.1(Binding Tape)	-	500	-
Clause-5.11.1(Closing Thread)	-	500	-
Clause-5.12.1(Material and Thickness)	-	500	-
Clause-5.12.2(Abrasion Resistance)	-	500	-
Clause-5.12.3(Water Absorption and Desorption)	-	500	-
Clause-5.13.1(Material and Thickness)	-	500	-
Clause-5.13.2(Abrasion Resistance)	-	500	-
Clause-5.13.3(Bond Strength of Textile Layer and Insock)	-	500	-
Clause-5.15(Toe Puff and Counter Stiffener)	-	500	-
Clause-5.16.1(Material)	-	500	-
Clause-5.16.2(Thickness)	-	500	-
Clause-5.16.3(Sole Density)	-	300	-
Clause-5.16.4(Hardness)	-	300	-
Clause-5.16.5(Ageing)	-	1500	-
Clause-5.16.6(Tear Strength)	-	500	-
Clause-5.16.7(Abrasion Resistance)	-	500	-
Clause-5.16.8(Flexing Resistance)	-	500	-
Clause-5.16.9(Hydrolysis)	-	1500	-
Clause-5.16.10(Interlayer Bond Strength)	-	500	-
Clause-5.17(Eyelets)	-	500	-
Clause-5.18.1(Material)	-	500	-
Clause-5.18.2(Colour Fastness (Light, Washing))	-	2000	-
Clause-5.18.3(Breaking Load and Tag Retention)	-	1000	-
Clause-5.18.4.1(Lace to lace)	-	1000	-
Clause-5.18.4.2(Lace to eyelet)	-	1000	-
Clause-6, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	35000	-
Clause-7(Marking)	-	500	-

15 Apr, 2027

-
-

11047

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 13411 (1992)

Glass reinforced polyester dough moulding compounds - Specification

26325.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Polymer Identification)	-	1050.00	-
5(Filler Content)	-	1200.00	-
6.1 & 6.2(Colour and form (Visual))	-	500.00	-
6.4 Table 1.(i)(Glass Content)	-	1200.00	-
Table 1.(ii)(Mould Shrinkage (Linear))	-	1850.00	Testing charge- 850.00 SPECIMEN/CONDITIONING CHARGE- 1000.00
Table 2 (i)(Density of Moulding)	-	1325.00	Testing Charges- 700.00 Specimen/Conditioning Charge- 625.00
Table 2 (ii)(Water Absorption)	-	1600.00	Testing Charge- 600.00 SPECIMEN/CONDITIONING CHARGE- 1000.00
Table 2 (iii)(Izod Impact Strength(Notched))	-	2100.00	Testing Charge- 1100.00 SPECIMEN/CONDITIONING CHARGE- 1000.00
Table 2 (iv)(Flexural Strength)	-	1100.00	SPECIMEN/CONDITIONING CHARGE- 1000.00 included in Izod Impact Strength (Notched)
Table 2 (v)(Modulus of Elasticity)	-	2100.00	Testing Charge- 1100.00 SPECIMEN/CONDITIONING CHARGE- 1000.00
Table 2 (vi)(Surface Resistivity)	-	2100.00	Testing Charge-1100.00 SPECIMEN/CONDITIONING CHARGE- 1000.00
Table 2 (vii)(Volume Resistivity)	-	1100.00	SPECIMEN/CONDITIONING CHARGE- 1000.00 included in Surface Resistivity
Table 2 (viii)(Tracking Resistance(CTI))	-	2100.00	Testing charge- 1100.00 SPECIMEN/CONDITIONING CHARGE- 1000.00
Table 2 (ix)(Arc Resistance)	-	1100.00	SPECIMEN/CONDITIONING CHARGE- 1000.00 included in Tracking Resistance (CTI)
Table 2 (x)(Dielectric resistance at 90ºC in oil)	-	2100.00	testing Charge- 1100.00 SPECIMEN/CONDITIONING CHARGE- 1000.00
Table 2 (xii)(Heat Distortion temp.)	-	2100.00	Testing Charge-1100.00 SPECIMEN/CONDITIONING CHARGE- 1000.00
Table 2 (xiii)(Oxygen Index)	-	1200.00	SPECIMEN/CONDITIONING CHARGE- 1000.00 included in Heat Distortion temp.
4(Grades)	-	0.0	-
5(Composition)	-	0.0	-
6.1(Colour)	-	0.00	-
6.2(Form)	-	0.00	-
6.3 (a)(Temperature)	-	0.00	-
6.3 (b)(Curing Time)	-	0.00	-
6.3 (c)(Pressure)	-	0.00	-
6.4 Table -1 (i)(Glass content, percent by mass, Min)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.4 Table - 1 (ii)(Mould shrinkage linear percent, Max)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.4 Table - 2 (i)(Density of moulding, g/cm3)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.4 Table - 2 (ii)(Water absorption, percent, Max)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.4 Table - 2 (iii)(Izod impact strength (Notched), KJ/m2, Min)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.4 Table - 2 (iv)(Flexural strength. Mpa, Min)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.4 Table - 2 (v)(Modulus of elasticity, MPa)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.4 Table - 2 (vi)(Surface resistivity (24 h in water), ohm,Min)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.4 Table - 2 (vi)(Surface resistivity (24 h in water), ohm,Min)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.4 Table - 2 (vii)(Volume resistivity, ohm-cm,Min)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.4 Table - 2 (viii)(Tracking resistance, CTI, Min)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.4 Table - 2 (ix)(Power arc resistance, Sec, Min)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.4 Table - 2 (ix)(Power arc resistance, Sec, Min)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.4 Table - 2 (x)(Dielectric strength at 90 C in oil kV/mm, Min)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.4 Table - 2 (xii)(Heat disrortion temperature, C, Min)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.4 Table - 2 (xiii)(Oxygen index, percent, Min)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.5 Table - 3 (ii)(Resistance to chemicals)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.5 Table - 3 (iii)(Post shrinkage, percent, Max)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.6(Resistance to chemicals)	-	0.00	TEST CHARGE ALREADY TAKEN ABOVE.
6.8(Storage Life)	-	0.00	-
6.8(Storage Life)	-	0.00	-
8(Testing)	-	0.00	-
9(Packing and Marking)	-	0.00	-

24 Apr, 2027

-
Exclusion: Table 1.(iii) (Time of Flow) Table 2 (xi) (Dissipation factor) Cl 6.4 Table - 1 (iii) (Flow, mm, Min) Cl 6.4 Table - 2 (xi) (Dissipation factor (4-days at 80 percent RH at 1KHz)) Cl 6.5 Table - 3 (i) (Continuous use temperature (long-term), C, Max) Cl 6.5 Table - 3 (iv) (Coefficient of linear thermal expansion, cm/cm/ C) Cl 6.7 (Thermal Endurance)

11048

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 14434 (2023)

POLYCARBONATE MOULDING AND EXTRUSION MATERIALS SPECIFICATION

16600.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2.2(Filler Content)	-	900.00	-
5(Melt Volume-Flow Rate (MVR))	-	1100.00	-
5.2(Specific Gravity)	-	500.00	-
5.3(Flexural Modulus)	-	2100.00	Specimen/Conditioning Charge - 1000.00
5.4(Charpy Impact Strength, Notched)	-	2100.00	Specimen/Conditioning Charge - 1000.00
5.5(Deflection Temperature Under 1.82 MPa)	-	1100.00	Specimen/Conditioning Charge - 1000.00 included in Charpy Impact Strength, Notched
5.6.1.2(Overall migration)	-	2000.00	Testing Charge- 1700.00 Specimen/Conditioning Charge - 300.00
4.2.5.2 Table 6 Sr.No.(i)(Volume resistivity)	-	2100.00	Testing Charge- 1100.00 SPECIMEN/CONDITIONING CHARGE- 1000.00
4.2.5.2 Table 6 Sr.No.(ii)(Dielectric strength)	-	1100.00	SPECIMEN/CONDITIONING CHARGE- 1000.00 included in Volume resistivity
4.2.5(Flammability)	-	2900.00	-
4.2.5(Optical Properties(% Transmittance))	-	700.00	-
4.1(General)	-	0.00	-
4.2.2.1(Data Block 2)	-	0.00	-
4.2.2.2(Block 2)	-	0.00	-
4.2.3(Data Block 3)	-	0.00	-
4.2.4 (a)(Melt volume-flow rate)	-	0.00	ALREADY TAKEN ABOVE. IT IS REPEATED
4.2.4 (b)(Specific gravity)	-	0.00	ALREADY TAKEN ABOVE. IT IS REPEATED
4.2.4 (c)(Flexural modulus)	-	0.00	ALREADY TAKEN ABOVE. IT IS REPEATED
4.2.4 (d)(Impact strength)	-	0.00	ALREADY TAKEN ABOVE. IT IS REPEATED
4.2.4 (e)(Deflection temperature)	-	0.00	ALREADY TAKEN ABOVE. IT IS REPEATED
4.2.5.2 Table - 6 (i)(Volume resistivity, Min, ohm-cm)	-	0.00	ALREADY TAKEN ABOVE. IT IS REPEATED
4.2.5.2 Table - 6 (ii)(Dielectric strength, Min, kV/mm)	-	0.00	ALREADY TAKEN ABOVE. IT IS REPEATED
5.6.1.2(Overall migration)	-	0.00	ALREADY TAKEN ABOVE. IT IS REPEATED
5.6.1.3(Storage and control)	-	0.00	-
6(Preparation of Test Specimens)	-	0.00	-
8(Packing and Marking)	-	0.00	-

24 Apr, 2027

-
Exclusion: Cl 4.2.5.2 Table 6 Sr.No.(ii) (Dielectric Constant) Cl 4.2.5.2 Table 6 Sr.No.(ii) (Dissipation factor) Cl 5.6.1.1 (Pigments and colourants)

11049

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 17043 (2018)

Derby shoes - Specification

53200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	35000	-
4.15.2(Breaking load & tag retention)	-	500	-
4.15.1(Length of laces )	-	300	-
4.14(Eyelet pull out test)	-	500	-
4.13.8(Flex resistance )	-	500	-
4.13.7(Abrasion resistance )	-	500	-
4.13.6(Tear Strength)	-	500	-
4.13.5(Ageing test)	-	1500	-
4.13.4(Hardness (IRHD))	-	300	-
4.13.3(Density )	-	300	-
4.13.2(Thickness )	-	300	-
4.13.1(Meterial)	-	1000	-
4.12(Breaking Strength of thread)	-	500	-
4.11.2(Tear Strength)	-	500	-
4.11.1(Thickness )	-	500	-
4.10(Toe Puff & counter stiffener thickness )	-	500	-
4.9.3(Abrasion resistance )	-	500	-
4.9.2(Water absorption & desorption )	-	500	-
4.8.2(Abrasion )	-	500	-
4.8.1(Thickness )	-	500	-
4.7.4(Water vapour permeability & coefficent )	-	500	-
4.7.3(Abrasion resistance )	-	500	-
4.7.2(Tear Strength)	-	500	-
4.7.1(Thickness )	-	500	-
4.6.4(Water penetration and water absorption)	-	500	-
4.6.3(Water vapour permeability & coefficent )	-	500	-
4.6.2(Tear Strength)	-	500	-
4.6.1(Thickness )	-	300	-
4.5.8(Energy absorption of seat region )	-	500	-
4.5.7(Cold insulation tester )	-	1500	-
4.5.6(Heat insulation of sole complex)	-	1500	-
4.5.5.1(Electrical Properties Antistatic )	-	1500	-
4.5.4(Slip Resitance)	-	1500	-
4.5.3.2(Interayer bond strength)	-	500	-
4.5.3.1(Upper/outsole bond strength)	-	500	-
4.5.2(Ergonomic Feature)	-	500	-
4.5.1(Contruction)	-	500	-
4.4(Height of upper )	-	500	-
4.3.2(Weight)	-	500	-
4.2(Design )	-	500	-
4.6.1(Upper Material)	-	500	-
4.7.1(Lining Material)	-	500	-
4.8.1(Insole Material)	-	500	-
4.9.1(Insocks Material)	-	500	-
4.11.1(Tongue Material)	-	500	-
4.13.1(Outsole Material)	-	500	-
4.14(Eyelet Material)	-	500	-
4.15.1(Laces Material)	-	500	-
4.10(Toe Puff and Counter Stiffener Material and thickness)	-	500	-
4.9.1(Thickness )	-	300	-
4.8.3(Water absorption & desorption )	-	500	-
6.1(Scale of Sampling)	-	500	-
6.2(Methods of Selecting Footwear)	-	500	-
6.3.1(Visual and Tactile Examination)	-	500	-
6.3.2(Dimensional Characteristics)	-	500	-
7(Marking)	-	500	-
6.1.3, Table 4(Scale of Sampling and Permissible Number of Defectives for Tests on Whole Footwear)	-	500	-
4.3.1(Size)	-	500	-
4.4, Table 3(Height of the Upper)	-	500	-
4.5.3(Bond Strength)	-	500	-
4.9(Insocks)	-	500	-
4.1(General)	-	500	-
4.1, Table 1(Physical Requirements for Derby Shoes)	-	500	-
6.3.3.1(Tests for physical requirements)	-	500	-
6.3.3.2(Tests for chemical requirements)	-	500	-

15 Apr, 2027

-
-

11050

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 17037 (2018)

Anti riot shoes - Specification

52500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	35000	-
4.16.2(Breaking load & lag retention)	-	500	-
4.16.1(Length of laces )	-	300	-
4.15(D-ring and Hooks )	-	300	-
4.14.10(Resistance to fuel oil)	-	900	-
4.14.9(Resistance to hot contact)	-	500	-
4.14.8(Flex resistance)	-	500	-
4.14.7(Abrasion resistance)	-	500	-
4.14.6(Tear Strength)	-	500	-
4.14.5(Ageing test)	-	500	-
4.14.4(Hardness (IRHD))	-	500	-
4.14.3(Density )	-	300	-
4.14.2(Thickness )	-	300	-
4.14.1(Meterial)	-	500	-
4.13(Breaking Strength of thread)	-	500	-
4.12.2(Tear Strength)	-	500	-
4.12.1(Thickness )	-	300	-
4.11.2(Tear Strength)	-	500	-
4.10(Counter stiffener thickness)	-	300	-
4.9.3(Water absorption & desorption )	-	1000	-
4.9.2(Abrasion resistance )	-	500	-
4.9.1(Meterial)	-	500	-
4.8.3(Water absorption & desorption )	-	1000	-
4.8.2(Abrasion resistance )	-	1000	-
4.8.1(Meterial)	-	1000	-
4.7.5(Water vapour permeability & coefficent )	-	1000	-
4.7.4(Abrasion resistance )	-	500	-
4.7.3(Tear Strength)	-	500	-
4.7.1(Meterial)	-	500	-
4.6.4(Water penetration and water absorption)	-	500	-
4.6.3(Water vapour permeability & coefficent )	-	1000	-
4.6.2(Tear Strength)	-	500	-
4.6.1(Thickness )	-	500	-
4.5.11(Water resistance machine method)	-	500	-
4.5.11(Water Resistance Tray method )	-	500	-
4.5.11(Thickness Toe puff & counter stiffener)	-	300	-
4.5.10(Energy absorption of seat region )	-	500	-
4.5.9(Cold insulation of sole complex)	-	1500	-
4.5.8(Heat insulation of sole complex)	-	500	-
4.5.7.1(Antistatic test)	-	1500	-
4.5.6.4(Compression resistance)	-	500	-
4.5.6.3(Impact resistance )	-	500	-
4.5.6.2(Internal Toe cap length)	-	500	-
4.5.6.1(General)	-	500	-
4.5.5.4(Ageing test)	-	1500	-
4.5.5.3(Nail penetraion Insert )	-	500	-
4.5.5.2(Flex resistance )	-	500	-
4.5.5.1(Dimension)	-	300	-
4.5.4(Slip Resitance)	-	1500	-
4.5.3.2(Interayer bond strength)	-	500	-
4.5.3.1(Upper/outsole bond strength)	-	500	-
4.5.2(Ergonomic Feature)	-	500	-
4.5.1(Contruction)	-	300	-
4.4(Height of upper )	-	300	-
4.3.2(Weight)	-	300	-
4.3.1(Size)	-	300	-
4.2(Design )	-	500	-
4.1(General)	-	300	-
4.5.3(Bond strength)	-	300	-
4.9(Insocks)	-	300	-
5(Chemical Requirements)	-	35000	-
6.1(Scale of Sampling)	-	500	-
6.2(Methods of Selecting Footwear)	-	500	-
6.3.1(Visual and Tactile Examination)	-	500	-
6.3.2(Dimensional Characteristics)	-	500	-
6.3.3.1(Tests for physical requirements)	-	500	-
6.3.3.2(Tests for chemical requirements)	-	35000	-
7(Marking)	-	500	-
4.4, Table 2(Shoe size)	-	500	-
4.4, Table 2(Height)	-	300	-
6.1.3, Table 3(Scale of Sampling and Permissible Number of Defectives for Tests on Whole Footwear)	-	500	-

15 Apr, 2027

-
-

11051

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 6721 (1972)

Specification for PVC sandal

47000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Dimension)	-	300	-
4.0(Lead Content )	-	1000	-
4.0(Volatility % by mass)	-	800	-
4.0(Tear strength )	-	500	-
4.0(Elongation at break )	-	500	-
4.0(Tensile Strength )	-	500	-
4.0(Hardness (IRHD))	-	300	-
4.0(Density )	-	300	-
4.2(Design)	-	300	-
"3.5(size and thickness of soles &heels)	-	300	-

15 Apr, 2027

-
Exclusion: Cl.8.4 table 4 (iii) outsole abrasion on leather outsole.

11052

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 16352 (2020)

Geosynthetics – High density polyethylene (HDPE) geomembranes for lining – Specification (first revision)

All Type

98700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	1500	-
5,3.1, Table 2,xi) Type I / II / III / IV / V / VI IS 2530(Carbon black content)	-	1500	-
5,3.1, Table2,iii) Type I / II / III / IV / V / VI Annex K(Lowest individual of 10 thickness value)	-	500	-
5,3.1, Table1,iii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Lowest individual of 10 thickness value)	-	500	-
5,3.1, Table2,iv) Type I / II / III / IV / V / VI Annex L(Average asperity height)	-	1000	-
5,3.1, Table 2,v) d) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking elongation)	-	1500	-
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	12500	-
5,3.1, Table 2,xvi) Type I / II / III / IV / V / VI Annex J(Stress crack resistance)	-	12500	-
5,3.1, Table1,iv) d) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking elongation)	-	1000	-
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	6500	-
5,3.1, Table 2,xiii) Type I / II / III / IV / V / VI ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	6500	-
5,3.1, Table1,xiii) Type I / II / III / IV / V / VI / VII Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	22500	-
5,3.1, Table 2,xiv) Type I / II / III / IV / V / VI Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	22500	-
3, 3.2(MATERIAL AND MANUFACTURE If two or more pieces of geomembranes are used, the material shall be joined together by a suitable heat sealing process keeping an overlap of at least 2.5 cm. )	-	0	-
4, 4.1(VARIETY AND TYPES : Based on the finish, HDPE geomembrane shall be of following varieties)	-	500	-
4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	500	-
4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	500	-
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	500	-
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	500	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	500	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	1500	-
5,3.1, Table1,iv) b) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking strength,)	-	1500	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	1000	-
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	2500	-
5,3.1, Table1,vi) Type I / II / III / IV / V / VI / VII Annex D(Puncture resistanc)	-	4500	-
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	5000	-
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F(Hydrostatic resistance)	-	8000	-
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	3500	-
5,3.1, Table1,xi) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black dispersion)	-	1200	-
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	25000	-
6(DIMENSIONS AND TOLERANCES The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.)	-	1500	-
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	500	-
7, 7.2(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS)	-	500	-
5,3.1, Table 2,xv) Type I / II / III / IV / V / VI Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	25000	-
5,3.1, Table 2,xii) Type I / II / III / IV / V / VI IS 2530(Carbon black dispersion)	-	1200	-
5,3.1, Table 2,x) Type I / II / III / IV / V / VI Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	3500	-
5,3.1, Table 2,iX) Type I / II / III / IV / V / VI Annex F(Hydrostatic resistance)	-	8000	-
5,3.1, Table 2,viii) Type I / II / III / IV / V / VI Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	5000	-
5,3.1, Table 2,vii) Type I / II / III / IV / V / VI Annex D(Puncture resistanc)	-	4500	-
5,3.1, Table 2,vi) a) Type I / II / III / IV / V / VI Annex C(Tear resistance)	-	2500	-
5,3.1, Table 2,v) c) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield elongation)	-	1000	-
5,3.1, Table 2,v) b) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking strength,)	-	1500	-
5,3.1, Table 2,v) a) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield strength,)	-	1500	-
5,3.1, Table2,ii) Type I / II / III / IV / V / VI Annex K(Average core thickness)	-	500	-
5,3.1, Table 2,i) b) Type I / II / III / IV / V / VI IS 7016 (Part 1)(width)	-	500	-
5,3.1, Table2,i) a) Type I / II / III / IV / V / VI IS 7016 (Part 1)(Length)	-	5000	-
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	25000	-
5,3.1, Table1,xi) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black dispersion)	-	1200	-
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	3500	-
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F(Hydrostatic resistance)	-	8000	-
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	5000	-
5,3.1, Table1,vi) Type I / II / III / IV / V / VI / VII Annex D(Puncture resistanc)	-	4500	-
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	2500	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	1000	-
5,3.1, Table1,iv) b) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking strength,)	-	1500	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	1500	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	500	-
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	500	-
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	500	-
5,3.1, Table 1(Requirements of Smooth HDPE Geomembrane)	-	500	-
5,3.1, Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane)	-	500	-
5(REQUIREMENTS)	-	0	-
4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	500	-
4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	500	-
4, 4.1(VARIETY AND TYPES : Based on the finish, HDPE geomembrane shall be of following varieties)	-	500	-
3, 3.2(MATERIAL AND MANUFACTURE If two or more pieces of geomembranes are used, the material shall be joined together by a suitable heat sealing process keeping an overlap of at least 2.5 cm. )	-	500	-
3, 3.1(MATERIAL AND MANUFACTURE)	-	0	-
5,3.1, Table 2,xiv) Type I / II / III / IV / V / VI Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	22500	-
5,3.1, Table1,xiii) Type I / II / III / IV / V / VI / VII Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	22500	-
5,3.1, Table 2,xiii) Type I / II / III / IV / V / VI ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	6500	-
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	6500	-
5,3.1, Table1,iv) d) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking elongation)	-	1000	-
5,3.1, Table 2,xvi) Type I / II / III / IV / V / VI Annex J(Stress crack resistance)	-	12500	-
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	12500	-
5,3.1, Table 2,v) d) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking elongation)	-	1000	-
5,3.1, Table2,iv) Type I / II / III / IV / V / VI Annex L(Average asperity height)	-	1000	-
5,3.1, Table1,iii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Lowest individual of 10 thickness value)	-	500	-
5,3.1, Table2,iii) Type I / II / III / IV / V / VI Annex K(Lowest individual of 10 thickness value)	-	500	-
5,3.1, Table 2,xi) Type I / II / III / IV / V / VI IS 2530(Carbon black content)	-	1500	-
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	1500	-
7, 7.2(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS)	-	500	-
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	500	-
6(DIMENSIONS AND TOLERANCES The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.)	-	1500	-
5,3.1, Table 2,xv) Type I / II / III / IV / V / VI Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	25000	-
5,3.1, Table 2,xii) Type I / II / III / IV / V / VI IS 2530(Carbon black dispersion)	-	1200	-
5,3.1, Table 2,x) Type I / II / III / IV / V / VI Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	3500	-
5,3.1, Table 2,iX) Type I / II / III / IV / V / VI Annex F(Hydrostatic resistance)	-	8000	-
5,3.1, Table 2,viii) Type I / II / III / IV / V / VI Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	5000	-
5,3.1, Table 2,vii) Type I / II / III / IV / V / VI Annex D(Puncture resistanc)	-	4500	-
5,3.1, Table 2,vi) a) Type I / II / III / IV / V / VI Annex C(Tear resistance)	-	2500	-
5,3.1, Table 2,v) c) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield elongation)	-	1500	-
5,3.1, Table 2,v) b) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking strength,)	-	1500	-
5,3.1, Table 2,v) a) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield strength,)	-	1500	-
5,3.1, Table2,ii) Type I / II / III / IV / V / VI Annex K(Average core thickness)	-	500	-
5,3.1, Table 2,i) b) Type I / II / III / IV / V / VI IS 7016 (Part 1)(width)	-	500	-
5,3.1, Table2,i) a) Type I / II / III / IV / V / VI IS 7016 (Part 1)(Length)	-	500	-
5,3.1, Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane)	-	1000	-
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	25000	-
5,3.1, Table1,xi) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black dispersion)	-	1200	-
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	3500	-
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F(Hydrostatic resistance)	-	8000	-
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	5000	-
5,3.1, Table1,vi) Type I / II / III / IV / V / VI / VII Annex D(Puncture resistanc)	-	4500	-
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	2500	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	1000	-
5,3.1, Table1,iv) b) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking strength,)	-	1500	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	1500	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	500	-
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	500	-
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	500	-
5,3.1, Table 1(Requirements of Smooth HDPE Geomembrane)	-	500	-
5(REQUIREMENTS)	-	0	-
4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	500	-
4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	500	-
4, 4.1(VARIETY AND TYPES : Based on the finish, HDPE geomembrane shall be of following varieties)	-	500	-
3, 3.2(MATERIAL AND MANUFACTURE If two or more pieces of geomembranes are used, the material shall be joined together by a suitable heat sealing process keeping an overlap of at least 2.5 cm. )	-	500	-
3, 3.1(MATERIAL AND MANUFACTURE)	-	0	-
5,3.1, Table 2,xiv) Type I / II / III / IV / V / VI Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	22500	-
5,3.1, Table1,xiii) Type I / II / III / IV / V / VI / VII Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	22500	-
5,3.1, Table 2,xiii) Type I / II / III / IV / V / VI ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	6500	-
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	6500	-
5,3.1, Table1,iv) d) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking elongation)	-	1000	-
5,3.1, Table 2,xvi) Type I / II / III / IV / V / VI Annex J(Stress crack resistance)	-	12500	-
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	12500	-
5,3.1, Table 2,v) d) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking elongation)	-	1000	-
5,3.1, Table2,iv) Type I / II / III / IV / V / VI Annex L(Average asperity height)	-	1000	-
5,3.1, Table1,iii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Lowest individual of 10 thickness value)	-	500	-
5,3.1, Table2,iii) Type I / II / III / IV / V / VI Annex K(Lowest individual of 10 thickness value)	-	500	-
5,3.1, Table 2,xi) Type I / II / III / IV / V / VI IS 2530(Carbon black content)	-	1500	-
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	1500	-
7, 7.2(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS)	-	500	-
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	500	-
6(DIMENSIONS AND TOLERANCES The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.)	-	1500	-
5,3.1, Table 2,xv) Type I / II / III / IV / V / VI Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	25000	-
5,3.1, Table 2,xii) Type I / II / III / IV / V / VI IS 2530(Carbon black dispersion)	-	1200	-
5,3.1, Table 2,x) Type I / II / III / IV / V / VI Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	3500	-
5,3.1, Table 2,iX) Type I / II / III / IV / V / VI Annex F(Hydrostatic resistance)	-	8000	-
5,3.1, Table 2,viii) Type I / II / III / IV / V / VI Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	5000	-
5,3.1, Table 2,vii) Type I / II / III / IV / V / VI Annex D(Puncture resistanc)	-	4500	-
5,3.1, Table 2,vi) a) Type I / II / III / IV / V / VI Annex C(Tear resistance)	-	2500	-
5,3.1, Table 2,v) c) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield elongation)	-	1000	-
5,3.1, Table 2,v) b) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking strength,)	-	1500	-
5,3.1, Table 2,v) a) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield strength,)	-	1500	-
5,3.1, Table2,ii) Type I / II / III / IV / V / VI Annex K(Average core thickness)	-	500	-
5,3.1, Table 2,i) b) Type I / II / III / IV / V / VI IS 7016 (Part 1)(width)	-	500	-
5,3.1, Table2,i) a) Type I / II / III / IV / V / VI IS 7016 (Part 1)(Length)	-	500	-
5,3.1, Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane)	-	500	-
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	25000	-
5,3.1, Table1,xi) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black dispersion)	-	1200	-
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	3500	-
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F(Hydrostatic resistance)	-	8000	-
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	5000	-
5,3.1, Table1,vi) Type I / II / III / IV / V / VI / VII Annex D(Puncture resistanc)	-	4500	-
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	2500	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	1000	-
5,3.1, Table1,iv) b) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking strength,)	-	1500	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	1500	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	500	-
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	500	-
5,3.1, Table 1(Requirements of Smooth HDPE Geomembrane)	-	500	-
5(REQUIREMENTS)	-	0	-
4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	500	-
4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	500	-
4, 4.1(VARIETY AND TYPES : Based on the finish, HDPE geomembrane shall be of following varieties)	-	500	-
3, 3.2(MATERIAL AND MANUFACTURE If two or more pieces of geomembranes are used, the material shall be joined together by a suitable heat sealing process keeping an overlap of at least 2.5 cm. )	-	500	-
3, 3.1(MATERIAL AND MANUFACTURE)	-	0	-
5,3.1, Table 2,xiv) Type I / II / III / IV / V / VI Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	22500	-
5,3.1, Table1,xiii) Type I / II / III / IV / V / VI / VII Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	22500	-
5,3.1, Table 2,xiii) Type I / II / III / IV / V / VI ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	6500	-
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	6500	-
5,3.1, Table1,iv) d) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking elongation)	-	1000	-
5,3.1, Table 2,xvi) Type I / II / III / IV / V / VI Annex J(Stress crack resistance)	-	12500	-
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	12500	-
5,3.1, Table 2,v) d) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking elongation)	-	1000	-
5,3.1, Table2,iv) Type I / II / III / IV / V / VI Annex L(Average asperity height)	-	1000	-
5,3.1, Table1,iii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Lowest individual of 10 thickness value)	-	500	-
5,3.1, Table 2,xi) Type I / II / III / IV / V / VI IS 2530(Carbon black content)	-	1500	-
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	1500	-
5,3.1, Table2,iii) Type I / II / III / IV / V / VI Annex K(Lowest individual of 10 thickness value)	-	500	-
7, 7.2(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS)	-	500	-
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	500	-
6(DIMENSIONS AND TOLERANCES The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.)	-	1500	-
5,3.1, Table 2,xv) Type I / II / III / IV / V / VI Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	25000	-
5,3.1, Table 2,xii) Type I / II / III / IV / V / VI IS 2530(Carbon black dispersion)	-	1200	-
5,3.1, Table 2,x) Type I / II / III / IV / V / VI Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	3500	-
5,3.1, Table 2,iX) Type I / II / III / IV / V / VI Annex F(Hydrostatic resistance)	-	8000	-
5,3.1, Table 2,viii) Type I / II / III / IV / V / VI Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	5000	-
5,3.1, Table 2,vii) Type I / II / III / IV / V / VI Annex D(Puncture resistanc)	-	4500	-
5,3.1, Table 2,vi) a) Type I / II / III / IV / V / VI Annex C(Tear resistance)	-	2500	-
5,3.1, Table 2,v) c) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield elongation)	-	1000	-
5,3.1, Table 2,v) b) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking strength,)	-	1500	-
5,3.1, Table 2,v) a) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield strength,)	-	1500	-
5,3.1, Table2,ii) Type I / II / III / IV / V / VI Annex K(Average core thickness)	-	500	-
5,3.1, Table 2,i) b) Type I / II / III / IV / V / VI IS 7016 (Part 1)(width)	-	500	-
5,3.1, Table2,i) a) Type I / II / III / IV / V / VI IS 7016 (Part 1)(Length)	-	500	-
5,3.1, Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane)	-	500	-
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	500	-
5,3.1, Table 1(Requirements of Smooth HDPE Geomembrane)	-	0	-
5(REQUIREMENTS)	-	0	-
3, 3.1(MATERIAL AND MANUFACTURE)	-	0	-

10 Mar, 2027

-
-

11053

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 15909 (2020)

PVC Geomembranes for Lining - Specification ( Second Revision )

All Type

167700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	200	-
5,Table 1(Length )	-	500	-
5,Table 1(Width )	-	500	-
5,Table 1(Thickness)	-	500	-
5,Table 1(Specific Gravity)	-	1500	-
5,Table 1( Tensile strength (Longitudinal) ,kg/m2)	-	1500	-
5,Table 1( Tensile strength (Transverse) ,kg/m2)	-	1500	-
5,Table 1(Elongation at break (Longitudinal),250 % ,Min)	-	1000	-
5,Table 1(Elongation at break (Transverse),250 % ,Min)	-	1000	-
5,Table 1(Tear resistance (machine direction))	-	2500	-
5,Table 1(Tear resistance (Cross direction))	-	2500	-
5,Table 1(Index puncture resistance,N)	-	4500	-
5,Table 1(Low temperature crack resistance)	-	5000	-
5,Table 1(Hydrostatic resistance,kg/cm2,Min)	-	8000	-
5,Table 1(Seam strength,kg,Min)	-	3500	-
5,Table 1(Volatile Loss ,% ,Max)	-	2500	-
5,Table 1(Peel strength,kN/m,Min)	-	5000	-
5,Table 1(Resistance to soil burial)	-	7000	-
5,Table 1(Tensile strength (Longitudinal),% change)	-	1500	-
5,Table 1(Elongation at break (Longitudinal),% change)	-	1000	-
5,Table 1(Tensile strength (Transverse),% change)	-	1500	-
5,Table 1(Elongation at break (Transverse),% change)	-	1000	-
5,Table 1(Water extraction,% loss in weight)	-	5000	-
5,Table 1(Stability to ultraviolet radiations,% retension in Tensile strength)	-	15000	-
5,Table 1(Stability to ultraviolet radiations,% retension in Elongation at break)	-	15000	-
6.0(Dimensions and tolerances)	-	1000	-
5, Table-2(Length)	-	500	-
5, Table-2(Width)	-	500	-
5, Table-2(Thickness at 20kPa pressure)	-	1000	-
5, Table-2(Tensile Strength (Longitudinal))	-	1500	-
5, Table-2(Tensile Strength (Transverse))	-	1500	-
5, Table-2(Elongation at break (Longitudinal))	-	1000	-
5, Table-2(Elongation at break (Transverse))	-	1000	-
5, Table-2(Tear Strength (Machine direction))	-	2500	-
5, Table-2(Tear Strength (Cross direction))	-	2500	-
5, Table-2(Behaviour during perforation)	-	4500	-
5, Table-2(Height of fall without perforation)	-	2000	-
5, Table-2(Cold crack resistance at low temperature)	-	5000	-
5, Table-2(Hydrostatic Pressure Resistance)	-	8000	-
5, Table-2(Dimensional Stability at 80 degree C)	-	15000	-
5, Table-2(Change in length after heating)	-	4000	-
5, Table-2(Change in width after heating)	-	4000	-
5, Table-2(Resistance to acid and alkali)	-	7000	-
5, Table-2(Strength of welded seam shear resistance)	-	3500	-
5, Table-2(Resistance to static puncturing)	-	2500	-
5, Table-2(Horizontal rate of burning)	-	45000	-
5, Table-2(Vertical rate of burning)	-	45000	-
7.0(Colour ,Surface characteristics and fredom from defects)	-	500	-
7.1(Colour ,Surface characteristics and fredom from defects)	-	500	-
7.2(Colour ,Surface characteristics and fredom from defects)	-	500	-
5,Table 1(Requirements)	-	0	For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS)

10 Mar, 2027

-
-

11054

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 10701 (2012)

Structural plywood - Specification (First Revision)

All Type

19750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 11.2(Moisture content)	-	750	-
11.3(Glue Shear strength in dry state)	-	1500	-
11.4.1(Resistance to Water)	-	2500	-
11.4.2(Resistance to Water)	-	2500	-
11.5(Resistance to Micro-organisms)	-	3000	-
11.6(Tensile Strength)	-	1500	-
11.7.1(Compressive Strength, Bending Strength, Panel Shear Strength, Plate Shear Strength and Rolling Shear Strngth)	-	6000	-
11.8(Wet Bending Strength)	-	2000	For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS)

10 Mar, 2027

-
-

11055

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

46500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	300	-
Cl No.4.2(Construction)	-	300	-
Cl No.4.3(Whole Footwear)	-	500	-
4.3.2(Toe spring height)	-	300	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	500	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	500	-
4.3.6(Energy Absorption at Seat Region)	-	500	-
4.3.7(Complete Shoe Flexing)	-	500	-
4.3.8(Washability)	-	500	-
4.3.9(Slip Resistance)	-	1500	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	500	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	500	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	800	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	800	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	1500	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	500	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	500	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	800	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	800	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	300	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	500	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	800	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	800	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	800	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	300	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	500	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	500	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	800	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	800	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	500	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	1500	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	800	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	500	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	500	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	500	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	500	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	500	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	500	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	500	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	500	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	500	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	600	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	500	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	500	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	500	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	3500	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1500	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	500	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	500	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	500	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
Clause 4.2 - 4.2.1(Construction)	-	300	-
4.3.1(Insole)	-	300	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	500	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	500	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	800	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	800	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	800	-
Clause 4.2 - 4.2.2(Construction)	-	300	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	300	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	35000	-
Cl No . 5(MARKING AND PACKING)	-	300	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	500	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	500	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	800	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	500	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	500	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	500	-
Clause 4.4, Table 1 ii)(Tear strength)	-	500	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	800	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	800	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	500	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	500	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	500	-
Clause 4.4, Table 2 iii)(Tear strength)	-	500	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	800	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	800	-
Clause 4.5, Table 3 i)(Tear strength)	-	500	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	800	-
Clause 4.6, Table 4 i)(Thickness)	-	300	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	800	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	800	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	800	-
Clause 4.7, Table 5 i)(Thickness)	-	300	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	800	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	800	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	800	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	800	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	500	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	800	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	500	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	500	-

15 Apr, 2027

-
Exclusion: Cl.4.6 table 4 (ii) flexing index, Min (only applicable for celluslose board)

11056

BIS, Southern Regional Laboratory (SRL)

None

IS 2785 (2022)

CHEESE - SPECIFICATION (Second Revision of IS 2785)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.1 (Appearance - IS 2785 :2022)	-
5.2.2 (Odour and Flavour-IS 2785 :2022)	-
5.2.3 (Texture and Consistency)	-
3 and 5.3 Table 1 (iii) (a) Processed Cheese (a) Moisture IS- 2785-2022 (Processed cheeze when sold in package othen than tin))	-
4 and 5.3 Table 1 (iii) (a) Processed Cheese (b) Moisture IS- 2785-2022 (Processed cheeze in chiplets, packed sliced))	-
3 and 5.3 Table 1 (iii) (a) Processed Cheese (Milk fat (On dry basis) IS 12758-2005)	-
3 and 5.3 Table 1 (iii) (b) Processed Cheese Spread (Moisture IS- 2785-2022)	-
3 and 5.3 Table 1 (iii) (b) Processed Cheese Spread (Milk fat (On dry basis) IS 12758-2005)	-
5.4 Table 2-i (Coliform-IS 5401(P-1):2012)	-
5.4 Table 2-ii (S.aureus-IS 5887(P-8/Sec-1):2002)	-
5.4 Table 2-iv (E.coli-IS 5887(P-1):1976)	-
5.4 Table 2-v (Salmonella spp.-IS 5887(P-3/Sec-1):2020)	-
5.4 Table 2-vi (L.monocytogenes-IS 14988(P-1):2020)	-
5.5 Table 3-i (Aerobic Colony count - IS 5402 (Part 2))	-
5.4 Table 2-iii (Yeast & Mould count-IS 5403:1999)	-
5.4 Table 2-ii (S.aureus-IS 5887(P-8/Sec-1):2002)	-
CL 5.5, Table 3 (iii) (Staphylococcus aureus (Coagulase positive))	-

-
500 g Excluding except lactose

11057

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 16187 (2014)

Textiles - High density polyethylene (HDPE)/ polypropylene (PP) leno woven sacks for packaging and storage of fruits and vegetables - Specification

Textiles-High density polyethylene polypropylene (PP) l

27230 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material - The tape shall be manufactured from virgin food grade high density polyethylene (HDPE)/polypropylene (PP))	-	1500	-
Clause no. 3.1(Density)	-	525	-
Clause no. 3.1(Melt flow Index)	-	825	-
3.2(Fabric - The fabric used in the manufacture of HDPE/PP leno woven sacks shall be woven as a tube on circular loom from HDPE/PP tapes having width in the range of 2.0-2.5 mm)	-	1500	-
3.3.1(Sack - Leno sacks fabricated out of woven fabric shall have seam at the bottom and/or side.The stitching shall be done with two rows of either lock stitch or chain stitch)	-	375	-
3.3.2(The tape or thread used for stitching shall have at least 20 percent higher denier than that used for making of the sack)	-	375	-
3.3.3(Sack - Bag Mouth)	-	375	-
3.3.4("Sack - sacks shall have nominal holding capacities of 25 kg and Type 2, sacks shall have nominal holding capacities of 50 kg")	-	375	-
4.1- Table 1- i)(Requirements of HDPE/PP Leno Woven Sacks - Capacity)	-	375	-
4.1- Table 1- ii)(Requirements of HDPE/PP Leno Woven Sacks - Dimensions, cm a) Inside length b) Inside width)	-	375	-
4.1- Table 1- iii)(Requirements of HDPE/PP Leno Woven Sacks - Mass of fabric, g/m2)	-	375	-
4.1- Table 1- iv)(Requirements of HDPE/PP Leno Woven Sacks - Ends per dm)	-	375	-
4.1- Table 1- v)(Requirements of HDPE/PP Leno Woven Sacks - Picks per dm)	-	750	-
4.1- Table 1- vi)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of fabric (cut strip method), N (kgf) a) Lengthwise b) Widthwise)	-	1475	-
4.1- Table 1- vii)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of bottom /side seam (cut strip method), N (kgf))	-	975	-
4.2(Requirements - UV Resistance)	-	10180	-
4.3(Requirements - Mass of Bale As per Annex C)	-	375	-
5.1(LABELLING, PACKING AND MARKING - Labelling on Sacks)	-	0	-
Clause no. 3.1(Raw Material, as applicable: PP Granules (IS 10910) Overall Migration)	-	1775	-
Clause no. 3.1(Lead)	-	2250	-
Clause no. 3.1(Arsenic)	-	0	-
Clause no. 3.1(Mercury)	-	0	-
Clause no. 3.1(Cadmium)	-	0	-
Clause no. 3.1(Zinc)	-	0	-
Clause no. 3.1(Raw Material, as applicable: HDPE Granules (IS7328))	-	0	-
Clause no. 3.1(Density)	-	525	-
Clause no. 3.1(Melt flow Index)	-	825	-
Clause no. 3.1(Lead)	-	0	-
Clause no. 3.1(Arsenic)	-	0	-
Clause no. 3.1(Mercury)	-	0	-
Clause no. 3.1(Cadmium)	-	0	-
Clause no. 3.1(Zinc)	-	0	-
3.1(Raw Material - The tape shall be manufactured from virgin food grade high density polyethylene (HDPE)/polypropylene (PP))	-	0	-
3.2(Fabric - The fabric used in the manufacture of HDPE/PP leno woven sacks shall be woven as a tube on circular loom from HDPE/PP tapes having width in the range of 2.0-2.5 mm)	-	375	-
3.3.1(Sack - Leno sacks fabricated out of woven fabric shall have seam at the bottom and/or side.The stitching shall be done with two rows of either lock stitch or chain stitch)	-	0	-
3.3.2(The tape or thread used for stitching shall have at least 20 percent higher denier than that used for making of the sack)	-	0	-
3.3.3(Sack - Bag Mouth)	-	0	-
3.3.4("Sack - sacks shall have nominal holding capacities of 25 kg and Type 2, sacks shall have nominal holding capacities of 50 kg")	-	0	-
4.1- Table 1- i)(Requirements of HDPE/PP Leno Woven Sacks - Capacity)	-	0	-
4.1- Table 1- ii)(Requirements of HDPE/PP Leno Woven Sacks - Dimensions, cm a) Inside length b) Inside width)	-	0	-
4.1- Table 1- iii)(Requirements of HDPE/PP Leno Woven Sacks - Mass of fabric, g/m2)	-	0	-
4.1- Table 1- iv)(Requirements of HDPE/PP Leno Woven Sacks - Ends per dm)	-	0	-
4.1- Table 1- v)(Requirements of HDPE/PP Leno Woven Sacks - Picks per dm)	-	0	-
4.1- Table 1- vi)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of fabric (cut strip method), N (kgf) a) Lengthwise b) Widthwise)	-	0	-
4.1- Table 1- vii)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of bottom /side seam (cut strip method), N (kgf))	-	0	-
4.2(Requirements - UV Resistance)	-	0	-
4.3(Requirements - Mass of Bale As per Annex C)	-	375	-
5.1(LABELLING, PACKING AND MARKING - Labelling on Sacks)	-	0	-
5.2(Packing)	-	0	-
5.3(Marking)	-	0	-
6(ATMOSPHERIC CONDITIONS, CONDITIONING AND TESTING)	-	0	-
Clause no. 3.1(Raw Material, as applicable: PP Granules (IS 10910) Overall Migration)	-	0	-
Clause no. 3.1(Lead)	-	0	-
Clause no. 3.1(Arsenic)	-	0	-
Clause no. 3.1(Mercury)	-	0	-
Clause no. 3.1(Cadmium)	-	0	-
Clause no. 3.1(Zinc)	-	0	-
Clause no. 3.1(Raw Material, as applicable: HDPE Granules (IS7328))	-	0	-
Clause no. 3.1(Density)	-	0	-
Clause no. 3.1(Melt flow Index)	-	0	-
Clause no. 3.1(Lead)	-	0	-
Clause no. 3.1(Arsenic)	-	0	-
Clause no. 3.1(Mercury)	-	0	-
Clause no. 3.1(Cadmium)	-	0	-
Clause no. 3.1(Zinc)	-	0	-
3.1(Raw Material - The tape shall be manufactured from virgin food grade high density polyethylene (HDPE)/polypropylene (PP))	-	0	-
3.2(Fabric - The fabric used in the manufacture of HDPE/PP leno woven sacks shall be woven as a tube on circular loom from HDPE/PP tapes having width in the range of 2.0-2.5 mm)	-	0	-
3.3.1(Sack - Leno sacks fabricated out of woven fabric shall have seam at the bottom and/or side.The stitching shall be done with two rows of either lock stitch or chain stitch)	-	0	-
3.3.2(The tape or thread used for stitching shall have at least 20 percent higher denier than that used for making of the sack)	-	0	-
3.3.3(Sack - Bag Mouth)	-	0	-
3.3.4("Sack - sacks shall have nominal holding capacities of 25 kg and Type 2, sacks shall have nominal holding capacities of 50 kg")	-	0	-
4.1- Table 1- i)(Requirements of HDPE/PP Leno Woven Sacks - Capacity)	-	0	-
4.1- Table 1- ii)(Requirements of HDPE/PP Leno Woven Sacks - Dimensions, cm a) Inside length b) Inside width)	-	0	-
4.1- Table 1- iii)(Requirements of HDPE/PP Leno Woven Sacks - Mass of fabric, g/m2)	-	0	-
4.1- Table 1- iv)(Requirements of HDPE/PP Leno Woven Sacks - Ends per dm)	-	0	-
4.1- Table 1- v)(Requirements of HDPE/PP Leno Woven Sacks - Picks per dm)	-	0	-
4.1- Table 1- vi)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of fabric (cut strip method), N (kgf) a) Lengthwise b) Widthwise)	-	0	-
4.1- Table 1- vii)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of bottom /side seam (cut strip method), N (kgf))	-	0	-
4.2(Requirements - UV Resistance)	-	0	-
4.3(Requirements - Mass of Bale As per Annex C)	-	0	-
5.1(LABELLING, PACKING AND MARKING - Labelling on Sacks)	-	0	-
5.2(Packing)	-	0	-
5.3(Marking)	-	0	-
6(ATMOSPHERIC CONDITIONS, CONDITIONING AND TESTING)	-	0	-

31 Dec, 2026

-
iNCLUDED W.E.F.03.07.2025 EXCLUSION Cl 3.1 (pigments & Colours)

11058

IEC TEST LABS LLP

8165726

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

30000 View breakup
Rs.30000/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	370	10% discount to BIS
6(Classification )	-	370	10% discount to BIS
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	370	10% discount to BIS
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	370	10% discount to BIS
(Cl.11 of 302-2-21:2011)(Heating)	-	370	10% discount to BIS
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	370	10% discount to BIS
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	370	10% discount to BIS
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	370	10% discount to BIS
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	370	10% discount to BIS
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	370	10% discount to BIS
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	370	10% discount to BIS
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	370	10% discount to BIS
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	370	10% discount to BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	370	10% discount to BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	370	10% discount to BIS
(Cl.24ofIS302-221:2011)(Component)	-	370	10% discount to BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	370	10% discount to BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	370	10% discount to BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	370	10% discount to BIS
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	370	10% discount to BIS
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	370	10% discount to BIS
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	370	10% discount to BIS
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	370	10% discount to BIS
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	370	10% discount to BIS
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	370	10% discount to BIS
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	370	10% discount to BIS
(Cl.18 of IS 2082:2018)( Reheating Time)	-	370	10% discount to BIS
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	370	10% discount to BIS
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	370	10% discount to BIS
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	370	10% discount to BIS
(Cl.22 of IS 2082:2018)(Finish)	-	370	10% discount to BIS
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	370	10% discount to BIS
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	370	10% discount to BIS
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	370	10% discount to BIS
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	370	10% discount to BIS
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	370	10% discount to BIS
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	370	10% discount to BIS
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	370	10% discount to BIS
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	370	10% discount to BIS
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	370	10% discount to BIS
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	370	10% discount to BIS
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	370	10% discount to BIS
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	370	10% discount to BIS
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	370	10% discount to BIS
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	370	10% discount to BIS
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	370	10% discount to BIS
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	370	10% discount to BIS
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	370	10% discount to BIS
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	370	10% discount to BIS
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	370	10% discount to BIS
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	370	10% discount to BIS
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	370	10% discount to BIS
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	370	10% discount to BIS
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	370	10% discount to BIS
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	370	10% discount to BIS
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	370	10% discount to BIS
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	370	10% discount to BIS
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	370	10% discount to BIS
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	370	10% discount to BIS
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	370	10% discount to BIS
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	370	10% discount to BIS
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	370	10% discount to BIS
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	370	10% discount to BIS
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	370	10% discount to BIS
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	370	10% discount to BIS
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	370	10% discount to BIS
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	370	10% discount to BIS
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	370	10% discount to BIS
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	370	10% discount to BIS
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	370	10% discount to BIS
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	370	10% discount to BIS
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	370	10% discount to BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	370	10% discount to BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	370	10% discount to BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	370	10% discount to BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	370	10% discount to BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	370	10% discount to BIS
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	370	10% discount to BIS
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	1140	10% discount to BIS

07 Sep, 2026

-
Included w.e.f. 11-01-2022.

11059

IEC TEST LABS LLP

8165726

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	9000	10% discount to BIS
5.2(Message Readability)	-	8000	10% discount to BIS
6(Marking)	-	8000	10% discount to BIS
5.1(Inputting of text)	-	9000	10% discount to BIS
5.2(Message Readability)	-	8000	10% discount to BIS
6(Marking)	-	8000	10% discount to BIS

07 Sep, 2026

-
Included w.e.f. 05-01-2023.

11060

IEC TEST LABS LLP

8165726

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

626400 View breakup
Restricted to Rs.6,26,400/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Condition of use)	-	55000	10% discount to BIS
5.1(Mechanical Endurance)	-	55000	10% discount to BIS
5.2(Charge efficiency)	-	53000	10% discount to BIS
5.3(Deep discharge protection)	-	55000	10% discount to BIS
5.4(Marking)	-	52000	10% discount to BIS
5.5(Dafety)	-	53000	10% discount to BIS
5.6(Documentation)	-	54000	10% discount to BIS
6(Finctional Characteristics)	-	57000	10% discount to BIS
7(General test conditions)	-	57000	10% discount to BIS
8.1(Capacity test)	-	53000	10% discount to BIS
8.2(Endurance test)	-	55000	10% discount to BIS
8.3(Charge retention test)	-	53000	10% discount to BIS
8.4(Cycle endurance in Photovoltaic application)	-	57000	10% discount to BIS
8.5(Sulphation Test)	-	54000	10% discount to BIS
8.6(Water loss test)	-	57000	10% discount to BIS
8.7(Non spillability)	-	55000	10% discount to BIS

07 Sep, 2026

-
Included w.e.f. 11-01-2022.

11061

IEC TEST LABS LLP

8165726

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

ELECTRIC IMMERSION WATER HEATERS

30000 View breakup
Rs.30000/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	2000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.18 of IS 368:2014(Endurance)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	2000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	2000	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022.

11062

IEC TEST LABS LLP

8165726

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

ELECTRIC INSTANT WATER HEATERS

22545 View breakup
Rs.22545/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-2-35:2017(Classification)	-	375	-
Cl.7 of IS 302-2-35:2017(Marking)	-	375	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	375	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	375	-
Cl.11 of 302-2-35:2017(Heating)	-	375	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	375	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	375	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	375	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	375	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	375	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	375	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	375	-
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	375	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	375	-
Cl.22 of IS 302-2-35-2011(Construction )	-	375	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	375	-
Cl.24 of IS 302-2-35:2017(Component )	-	375	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	375	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	375	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	375	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	375	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	375	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	375	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	375	-
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	375	-
Cl.10 of IS 8978 : 1992(Finish)	-	375	-
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	375	-
Cl.12 of IS 8978 : 1992(Endurance)	-	375	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	375	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	375	-
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	375	-
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	375	-
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	375	-
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	375	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	375	-
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	375	-
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	375	-
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	375	-
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	375	-
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	375	-
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	375	-
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	375	-
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	375	-
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	375	-
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	375	-
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	375	-
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	375	-
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	375	-
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	375	-
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	375	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	375	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	375	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	375	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	375	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	375	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	375	-
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	375	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	375	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	375	-
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	375	-
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	375	-
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	375	-
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	375	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	375	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	375	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	375	-
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	375	-
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	375	-
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	300	-
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	300	-
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	300	-
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	300	-
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	300	-
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	300	-
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	300	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022.

11063

IEC TEST LABS LLP

8165726

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

ELECTRIC IMMERSION WATER HEATERS

15125 View breakup
Rs.15125/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	2000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	2000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	2000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	2000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	2000	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022.. Exclusions: EMI/EMC tests (Cl.19.11.4.1 to 19.11.4.7)

11064

IEC TEST LABS LLP

8165726

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

ELECTRIC INSTANT WATER HEATERS

22500 View breakup
Rs.22500/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6 IS 302-2-35(Classification)	-	1000	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	1000	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	2000	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	1000	-
Cl. 11 IS 302-2-35(Heating)	-	1000	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	1000	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2000	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	1000	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	1000	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	1000	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	1000	-
Cl. 22 IS 302-2-35(Construction )	-	1000	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	1000	-
Cl. 24 IS 302-2-35(Components)	-	1000	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	1000	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	1000	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	1000	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	1000	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	1000	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	2000	-
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	2000	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022.. Exclusions: EMI/EMC tests (Cl.19.11.4.1 to 19.11.4.7)

11065

IEC TEST LABS LLP

8165726

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

STATIONARY STORAGE TYPE ELECTRIC WATER HEATERS

30000 View breakup
Rs.30000/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	-
7.0(Marking and Instructions)	-	1000	-
8.0(Protection against access to live parts)	-	2000	-
10.0(Input and Current)	-	2000	-
11.0(Heating)	-	2000	-
13.0(Leakage Current and electric strength at operating temperature)	-	2000	-
14.0(Transient Overvoltage)	-	1000	-
15.0(Moisture resistance)	-	1000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	1000	-
19.0(Abnormal Operation)	-	1000	-
20.0(Stability and mechanical hazards)	-	1000	-
21.0(Mechanical Strength)	-	1000	-
22.0(Construction)	-	1000	-
23.0(Internal Wiring)	-	1000	-
24(Components)	-	1000	-
25.0(Supply Connection and External Flexible Cords)	-	1000	-
26.0(Terminals for external conductors)	-	1000	-
27.0(Provision For Earthing)	-	1000	-
28.0(Screws and Connections)	-	1000	-
29.0(Creepage Distances and Clearances)	-	2000	-
30.0(Resistance To Heat and Fire)	-	2000	-
31.0(Resistance To Rusting)	-	2000	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022. Exclusions: EMI/EMC tests (Cl.19.11.4.1 to 19.11.4.7)

11066

IEC TEST LABS LLP

8165726

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

RICE COOKER

17950 View breakup
Rs.17950/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	2000	-
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	2000	-
10(POWER INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2000	-
14(TRANSIENT OVERVOLTAGES)	-	2000	-
15(MOISTURE RESISTANCE)	-	2000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	1000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2000	-
22.16(Automatic cord reel)	-	2000	-
22.47(Water pressure inlet)	-	2000	-
22.3(Flexing test)	-	2000	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022. Exclusions: EMI/EMC tests (Cl.19.11.4.1 to 19.11.4.7)

11067

IEC TEST LABS LLP

8165726

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

ADAPTERS FOR HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCE

50000 View breakup
Rs.50000/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	1000	-
11.2(General)	-	1000	-
11.3(Heating)	-	1000	-
13.1(General)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
14(Transient Over Voltages)	-	1000	-
15.0(General)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.2(Spillage Test)	-	1000	-
15.3(Humidity Test)	-	1000	-
16.0(General)	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.1(General)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
19(Abnormal Operation)	-	1000	-
20(Stability test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
22(Construction verification related test)	-	1000	-
23(General)	-	1000	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screw test and connections)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
31(Resistance to Rusting)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
4(General requirement)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	2000	-
11.4(Heating appliances)	-	2000	-
11.5(Motor-operated appliances)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.7(Duration corresponding)	-	2000	-
11.8(Temperature rise)	-	1000	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022. Exclusions: EMI/EMC tests (Cl.19.11.4.1 to 19.11.4.7) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

11068

IEC TEST LABS LLP

8165726

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

50000 View breakup
Rs.50000/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	-
8(Protection against accidental contact with live parts)	-	4000	-
9(Terminals)	-	4000	-
10(PROVISION FOR EARTHING)	-	4000	-
11(MOISTURE RESISTANCE)	-	4000	-
12(Electric Strength)	-	4000	-
14(Fault conditions)	-	4000	-
15(Transformer heating)	-	4000	-
16(Construction)	-	4000	-
17(Creepage distance and clearances)	-	4000	-
18(Screws, current carrying parts and connections)	-	4000	-
19(Resistance to heat, fire and tracking)	-	4000	-
20(Resistance to corrosion)	-	4000	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022. Exclusions: Testing of components [Enclosure, Bridging resistor in primary circuit, Capacitor & RC units, RF Suppression (X-Y capacitors), MOV/VDR, PCB material, Metal base PCB for LED, Transparent cover, Bobbin, Insulated tape, Heat shrinkage sleeves, Connector, Fuse, Internal wire, LED, Opto-coupler, EMI/EMC filter, Winding wire, Thin sheet materials.]

11069

IEC TEST LABS LLP

8165726

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

43875 View breakup
Rs.43875/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2000	-
6(Interchangeability)	-	5000	-
7(Protection against accidental contact with live parts)	-	5000	-
8(Insulation Resistance and Electric Strength)	-	6000	-
9(MECHANICAL STRENGTH)	-	6000	-
10(cap temperature)	-	6000	-
11(Resistance to Heat)	-	4000	-
12(Resistance to Flame and Ignition)	-	4000	-
13(Fault conditions)	-	5000	-
14(Creepage distance and clearances)	-	5000	-
4(General requirement and General test requirements)	-	2000	-
15(Selection of lamps for tests (Sampling))	-	0	-
16(Condition of compliance)	-	0	-
17(Tests)	-	0	-
Annex A(Ovreview of systems composed of LED modules and control gear)	-	0	-
Annex B(Lamps with operating position limitations)	-	0	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022.

11070

IEC TEST LABS LLP

8165726

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

25000 View breakup
Rs.25000/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	12500		10% discount to BIS
5.2(Message Readability)	-	12500		10% discount to BIS

07 Sep, 2026

-
Included w.e.f. 11-01-2022.

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number