BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11238 Results

S.No.

Lab Name

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

11071

BIS, Northern Regional Laboratory (NRL)

IS 1879 (2010)

Malleable cast iron pipe fittings - Specification (Third Revision)

Rs.7800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Tensile Strength - IS 14329)	-
6.1 (Elongation - Is 14329)	-
7.2- Table 2 (Wall thickness of fittings - IS 1879)	-
7.5 - Table 2 (Projection of Rainforcement - IS 1879)	-
7.5 - Table 3 (Width of Rainforcement - IS 1879)	-
7.1 - Table 4 to Table 27 (a - IS 1879)	-
7.1 - Table 4 to Table 27 (b - IS 1879)	-
7.1 - Table 4 to Table 27 (c- IS 1879)	-
7.1 - Table 4 to Table 27 (d- IS 1879)	-
7.1 - Table 28 (d -IS 1879)	-
8.1 (Thread -IS 554)	-
8.2 (Alignment of threads -IS 554)	-
11 (Pressure Test)	-
5.1.1 (Type of Fittings - IS 1879)	-
5.1.2 (Size designation - IS 1879)	-
5.1.2.2 (Unequal fitting -IS 1879)	-
5.1.3 (Right and Left hand thread - IS 1879)	-
5.1.1 (Code Number -IS 1879)	-
10.iv) (Freedom from defects IS 4759)	-
12 (Compression Test)	-
10.iii) (Adhesion of Galvanized coating IS 2629)	-
10.i) (chem) (Mass of Galvanized coating)	-
10.ii) (chem) (Uniformity of Galvanized coating-IS 2633)	-
9 (Freedom from defects )	-
7.1 - Table 28 (D - IS 1879)	-
5.1.2.1 (Equal fitting - IS 1879)	-
10.i) (Mass of Galvanized coating )	-
10.ii) (chem) (Uniformity of Galvanized coating-IS 2633)	-

Complete

-
Test facility is complete

11072

BIS, Southern Regional Laboratory (SRL)

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

AAAC

Rs 825/- upto 7 wires, Rs 1425/- upto 19 wires View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Freedom from Defects)	-
7.1 Table-1 (Dimensional measurement of wires)	-
7.2.2 Table-2, Table-4 (Calculated resistance of Stranded Conductor)	-
8.1 (Joints in wires-Conductors Containing Seven Wires)	-
8.2 (Joints in wires-Conductors Containing More Than Seven Wires)	-
9.1 (Stranding)	-
9.2 Table 3 (Lay Ratio of stranded conductors)	-
9.3 (Direction of Lay)	-
9.4 (Multiple layers of wires)	-
11 (Packing and Marking)	-
12.2 Table 1 (Breaking Load Test- Before Stranding)	-
12.2 Table 1 (Breaking Load Test- After Stranding)	-
12.3 Table 1 (Elongation Test- Before Stranding)	-
12.3 Table 1 (Elongation Test- After Stranding)	-
12.3 Table 1 (Elongation Test- Before Stranding)	-
12.3 Table 1 (Elongation Test- After Stranding)	-
12.4 Table 1 (Resistance of Aluminium wire)	-
9.2 Table 3 (Lay Ratio of stranded conductors)	-

Complete

-
5 m

11073

BIS, Southern Regional Laboratory (SRL)

IS 11169 : Part 2 (1989)

Steels for cold heading/cold extrusion applicationsspecification: Part 2 stainless steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (FREEDOM FROM DEFECTS)	-
8.2, table 5 (i) Yield stess/.2% Proof stress, Mpa)	-
8.2, table 5 (ii)Ultimate Tensile Strength, Mpa)	-
8.2, table 5 (iii)Elongation, %)	-
8.2, table 5 (v)Impact strength, J)	-

Partial

-
" mech - 2 x 1 m Excluding except chemical tests

11074

BIS, Southern Regional Laboratory (SRL)

IS 261 (1982)

Specification for copper sulphate (Second Revision)

- View breakup
Rs 2400/- for Tech., Rs 3900/- for Pure

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
1(i) Table 1 (Copper, Tech, A-2)	-
1(ii) Table 1 (Matter insoluble in water, Tech, A-3)	-
1(iii) Table 1 (Soluble iron and aluminium compounds ( as Fe ), Tech, A-4)	-
1(iv) Table 1 (pH value, Tech, A-5)	-
1(v) Table 1 (Chloride ( as Cl ), Tech, A-6)	-
1(vi) Table 1 (Arsenic ( as As2O3 ), Tech, A-7)	-
1(vii) Table 1 (Lead and zinc, Tech, A-8)	-

Complete

-
" 500 g

11075

BIS, Northern Regional Laboratory (NRL)

IS 1165 (2002)

Milk powder - Specification (First Revision)

- View breakup
The complete testing charges for the product are Rs.5215x2=Rs.10430.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.4.5 (Moisture)	-
3.4.5 (Total solids)	-
3.4.5 (Fat)	-
3.4.5 (Insolubility index)	-
3.4.5 (Total ash)	-
3.4.5 (Titratable acidity (lactic acid))	-
3.1 (Description)	-
3.2 (Flavour and Taste)	-
3.5 (Bacterial count)	-
3.5.2 (Coliform count)	-
3.5.3 (Staphylococcus Aureus)	-
3.5.4 (Salmonella)	-
3.5.5 (Shigella)	-

Partial

-
Except Table 3

11076

BIS, Northern Regional Laboratory (NRL)

IS 10325 (2000)

Square tins - 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings - Specification (Second Revision)

- View breakup
Rs.3700/- (excluding Solder testing) and Rs.1500/- for solder testing.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.1 (Material)	-
4.1 (Dimensions and Tolerances)	-
4.2.2 (Handle)	-
4.2.1.1 (Dimensions and Tolerances )	-
4.3.4 (Manufacture)	-
4.3.5 (Handle)	-
5.1 (Air-Pressure Test)	-
5.2 (Handle Pull Test)	-
5.3 (Hydraulic Pressure Test)	-
4.2.1 (Material)	-
4.2.1 (Material)	-
4.3.1 (Manufacture)	-
4.3.2 (Manufacture)	-
4.3.3 (Manufacture)	-
4.3.4 (Manufacture)	-
4.3.5 (Handle)	-

Partial

-
Except Tin Content

11077

BIS, Southern Regional Laboratory (SRL)

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

Rs 6760/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Classification Heavy/Medium/L:ight)	-
5.1 (The utensil shall be pressed or spun from one piece)	-
5.2 ( Body Thickness of the thinnest part of the finished utensil, mm Not declared )	-
6.1 & Table 1 ( i) Name of Utensil )	-
6.1 & Table 1 (ii) Shape of Utensil)	-
6.1 & Table 1 (Inside dia, Φ D mm Not declared )	-
6.1 & Table 1 (Height NA)	-
6.1 & Table 1 (Capacity, l NA)	-
6.1 ( Minimum sheet thickness for nominal size )	-
7.1 (HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-
7.2 (Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-
8.1 (The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-
8.2 (The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-
8.4.1.2 ( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.)	-
8.4.2 (A coating of thickness 25 to 100 microns is generally required)	-
8.4.3 (Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface)	-
8.4.4 (The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. )	-
8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible)	-
9 (The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils)	-
10 (Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. )	-

Partial

-
" 2 nos Excluding Excl. Tests for Non-stick Coating and tests for lunch boxes cl. 8.6.,no chemical tests

11078

BIS, Southern Regional Laboratory (SRL)

IS 6452 (1989)

High alumina cement for structural use - specification (First Revision)

Testing charges for the product are: 3,700.00 Testing View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (Fineness IS 4031(Part 2))	-
4.3 (Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-
4.4 (Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-
4.4 (Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-
4.5 (Compretsive Strenqth .24 hrs ± 30min IS 4031(Part 6))	-
4.5 (Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-
4.1 (Total alumina content (Al2O3) - Cl 4.6 of IS 4032:1985)	-

Partial

-
" 8 kg + 500 g " Excluding chem facility not available.

11079

BIS, Southern Regional Laboratory (SRL)

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

- View breakup
Rs.16650/- for single core unarmoured cable, Rs.22500/- for two core, unarmoured cable, Rs.26700/- for two core armoured cable (Excluding addl. Type test for cables with improved fire performance.) For multi core cables, extra charges @ 35 % for each additional core shall be levied. Material testing charges as per relevant referred ISs Testing charges for Additional Type Tests for Improved Fire Performance Tests: Rs. 7100/- for category C1 Rs. 11700/- for category C2

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (MATERIALS : CONDUCTOR)	-
4.1.1 (INSULATION : General Purjose Insulaiion)	-
4.1.2 (INSULATION : Heat Resisting Insulation)	-
5.1 (MATERIALS : FILLER AND INNER SHEATH)	-
5.2 (MATERIALS : FILLER AND INNER SHEATH)	-
6.1 (MATERIALS : ARMGURING)	-
6.2 (MATERIALS : ARMGURING)	-
7.1.1 (OUTER SHEATH : For Cables with General Purpose InsuIafion)	-
7.1.2 (OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-
8.1 (CONSTRUCTION : CONDUCTOR)	-
8.2 (CONSTRUCTION : CONDUCTOR)	-
9.1 (INSULATION )	-
9.2 (INSULATION : Thickness of Insulation)	-
9.3 (INSULATION :Tolerance on Thickness of Insulation)	-
9.4 (INSULATION : Application of Insulation)	-
10.1 (CORE IDENTIFICATION)	-
10.2 (CORE IDENTIFICATION)	-
10.3 (CORE IDENTIFICATION)	-
10.3.1 (Arrangement of Marking)	-
11.1 (LAYING UP OF CORES)	-
11.2 (LAYING UP OF CORES)	-
12.1 (INNER SHEATH)	-
12.2 (INNER SHEATH)	-
12.3 (INNER SHEATH :Thickness of Inner Sheath)	-
12.3.1 (INNER SHEATH :Thickness of Inner Sheath)	-
13.1.1 (ARMOURING : Application)	-
13.1.2 (Armouring: Coverage )	-
13.1.3 (ARMOURING : Direction of lay )	-
13.1.4 (ARMOURING : Application)	-
13.2 (ARMOURING : Type of Armour)	-
13.2.1 (ARMOURING : Type of Armour)	-
13.3 (Armouring : Dimensions -Wire Diameter)	-
13.3 (Armouring : Dimensions -Formed wire )	-
13.4 (ARMOURING : Joints)	-
13.5.1 (ARMOURING : Resistance)	-
13.5.2 (ARMOURING : Resistance)	-
13.6 a) (ARMOURING: Tensile Strength)	-
13.6 b) (ARMOURING: Elongation )	-
13.6 c) (ARMOURING: Torsion Test (For round wire ) )	-
13.6 d) (ARMOURING: Winding Test(For formed wire))	-
13.6 e) (ARMOURING: Uniformity of zinc coating)	-
13.6 f) (ARMOURING: Mass of zinc coating )	-
13.6 g) (ARMOURING: Resistivity)	-
14.1 (OUTER SHEATH)	-
14.2 (OUTER SHEATH)	-
14.3 (OUTER SHEATH : Colour )	-
14.4.1 (Thickness of Outer Sheath : Unarmowed Cables)	-
14.4.2 (Thickness of Outer Sheath : Armoured Cables)	-
15.1 a) 1) (Tests on conductor : Annealing test ( for copper ))	-
15.1 a) 2) (Tensile test (for aluminium) - Before stranding )	-
15.1 a) 2) (Tensile test (for aluminium) - After stranding )	-
15.1 a) 3) (Tests on conductor : Wrapping test ( for aluminium ))	-
15.1 a) 4) (Tests on conductor : Conductor resistance test)	-
15.1 a) 4) (Resistance test - Neutral conductor )	-
15.1 d)1) (Phyaical tests for insulation : Tensile Test)	-
15.1 d)1) (Phyaical tests for insulation : Elongation )	-
15.1 d)1) (Physical tests for sheath : Tensile stregth )	-
15.1 d)1) (Physical tests for sheath : Elongation )	-
15.1 d)2) (Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-
15.1 d)2) (Phyaical tests for insulation - Ageing in air oven : Elongation )	-
15.1 d)2) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-
15.1 d)2) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
15.1 d)2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
15.1 d)2) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
15.1 d)2) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
15.1 d)2) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
15.1 d)3) (Phyaical tests for insulation : Shrinkage )	-
15.1 d)3) (Phyaical tests for insulation : Shrinkage - Crack observed )	-
15.1 d)3) (Phyaical tests for Sheath : Shrinkage )	-
15.1 d)3) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-
15.1 d)4) (Hot deformation : Insulation )	-
15.1 d)4) (Hot deformation : Sheath )	-
15.1 d)5) ( Loss of mass in air oven- Insulation )	-
15.1 d)5) ( Loss of mass in air oven- sheath )	-
15.1 d)6) (Heat shock test- Insulation )	-
15.1 d)6) (Heat shock test- sheath )	-
15.1 d)7) (Thermal stability- insulation )	-
15.1 d)7) (Thermal stability- Sheath )	-
15.1 e) (Insulation resistance test : Volume Resistivity )	-
15.1 e) (Insulation resistance test : IR Constant )	-
15.1 f) (High voltage test ( water immersion test ))	-
15.1 g) (High voltage test at room temperature)	-
16.1 (DETAILS OF TESTS : General)	-
16.2 (DETAILS OF TESTS : High Voltage Test at Room Temperature)	-
16.3.1 (High Voltage Test ( Water Immersion Test ) : a.c. Test)	-
16.3.2 (High Voltage Test ( Water Immersion Test ) : d.c. Test)	-
16.4 (Flammability Test)	-
17.1 (IDENTIFICATION : Manufacturer’s Identification)	-
17.2 (IDENTIFICATION : Cable Identification)	-
17.2.1 (IDENTIFICATION : Cable Identification)	-
17.3 (IDENTIFICATION : Cable Code)	-
16.4 (Flammability Test)	-
13.6 f) (ARMOURING: Mass of zinc coating )	-

Partial

-
" 15m Excluding Except improved fire performance test for C1,C2 category(Optional tests)

11080

BIS, Southern Regional Laboratory (SRL)

IS 11536 (2007)

Processed - Cereal based complementary foods - Specification (Second Revision)

Rs.29460.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Description)	-
5.7 (Flavour and odour)	-
5.9 Table 1 i (Moisture)	-
5.9 Table 1 ii (Total protein)	-
5.9 Table 1 iii (Total Carbohydrates)	-
5.9 Table 1 iv (Total Ash)	-
5.9 Table 1 v (Ash Insoluble in dilute Hydrochloric Acid)	-
5.9 (Ash Insoluble in dilute HCl Acid)	-
5.9 Table 1 vi (Iron)	-
5.9 (Zinc )	-
5.9 (Lead)	-
5.9 (Copper)	-
5.9 (Arsenic)	-
5.9 (Tin)	-
5.9 (Cadmium)	-
5.8.1 ( Bacterial Count)	-
5.8.2 (Coliform Count)	-
5.8.3 (Yeast and Mould count)	-
5.8.4 (Salmonella)	-
5.8.4 (Shigella)	-
5.8.5 (Eseherichia coii)	-
5.8.6 (Staphylococcus aureus)	-

Partial

-
2X250g Excluding facility available for only microbiology tests, No chemical tests facility

11081

BIS, Eastern Regional Laboratory (ERL)

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

All types (please see remarks)

Rs 2850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
6 (Freedom From Defects)	-
9.3, Table 3 (Yield Strength, Mpa)	-
9.3, Table 3 (Elongation, %)	-
9.4 (Erichsen Cupping Test,(Average depth of cupping) mm)	-
14.2 ( Width, mm)	-
14.1 (Thickness,mm)	-
14.3 (Length, mm)	-
14.5 (Camber, mm)	-
6 (Freedom From Defects)	-
9.3, Table 3 (Yield Strength, Mpa)	-
9.3, Table 3 (Elongation, %)	-
9.4 (Erichsen Cupping Test,(Average depth of cupping) mm)	-
14.2 ( Width, mm)	-
14.1 (Thickness,mm)	-
14.3 (Length, mm)	-
14.5 (Camber, mm)	-

Partial

-
Mech-Type of conditioning, heat treatment, grade, form size,finish to be declared.. Chem- Facility not available for S, Mo(>1.5), C (<0.05)

11082

BIS, Guwahati Branch Laboratory (GBL)

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

Rs.8420/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 -Table 2- i (Fineness 4031 Part 2)	-
7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-
7 -Table 2- ii- a (Expansion after aeration - 4031 Part 3)	-
7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
7 -Table 2- ii- b (Expansion after aeration- 4031 Part 3)	-
7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
7 -Table 2-iii- b (Setting Time Final- 4031 Part 5)	-
7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10)	-
6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985)	-
6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985)	-
6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-
6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985)	-
6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-

Partial

-
Partial T.F. available. (Transverse strength test is not available)

11083

BIS, Southern Regional Laboratory (SRL)

IS 10325 (2000)

Square tins - 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings - Specification (Second Revision)

- View breakup
Rs.3700/- (excluding Solder testing) and Rs.1500/- for solder testing.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions and Tolerances)	-
4.2.2 (Handle)	-
5.1 (Air-Pressure Test)	-
5.3 (Hydraulic Pressure Test)	-
5.2 (Handle Pull Test)	-
4.1 (Dimensions and Tolerances)	-
4.3.1 (Manufacture)	-
4.3.2 (Manufacture)	-
4.3.4 (Manufacture)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-
4.3.5 (Handle)	-

Partial

-
" 3 Nos. " Excluding Chemical facility(tin Coating test) not available.

11084

BIS, Southern Regional Laboratory (SRL)

IS 15962 (2012)

Structural steels for buildings and structures with improved seismic resistance

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Freedom from Defects)	-
Cl 10 (Tensile Test)	-
Cl 11 (Impact Test)	-
Cl 13 (Dimensions)	-
Cl 13 (Dimensions)	-
Cl 13 (Dimensions)	-
Cl 13 (Dimensions)	-

Partial

-
" 1.5 m " Excluding except tensile test for the samples of diameter above 20 mm and chemical tests; (Prepared test pieces are required for Impact test)

11085

BIS, Northern Regional Laboratory (NRL)

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

Rs.3280/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (General Requirement)	-
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-

Complete

-
Test facility is complete

11086

BIS, Southern Regional Laboratory (SRL)

IS 1029 (1970)

Specification for hot-rolled steel strip (Baling) (First Revision)

Rs.750/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Freedom from defects)	-
8.2 (Width)	-
8.2 (Thickness)	-
9.1 (Finishing & Packing)	-

Partial

-
" 0.5 sq.m Excluding except tensile, bend test and chemical tests

11087

BIS, Southern Regional Laboratory (SRL)

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 12 (Workmanship)	-
Cl 13 (Length, Width & Thickness)	-

Partial

-
" 2x0.5 mt " Excluding Excl cupping test, Bend test (as lower sizes of manderls is not available), Strain aging test and chemical requirements

11088

BIS, Eastern Regional Laboratory (ERL)

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

all varieties.

Rs.19750/- (including all parameters), Rs.10450/- (excl View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (TYPES)	-
4.2 (Construction)	-
4.3.1 (Bottom Seam)	-
4.3.1 ( The two rows of stitches shall be separated from each other)	-
4.3.1 ( The outer stitch)	-
4.3.1 (Stitches pass through a minimum of six layers of the fabric. )	-
4.3.1 (The number of stitches/dm)	-
4.3.2 (Mouth)	-
4.4 and Table 1 i (Capacity)	-
5.2 and Table 1 ii a (Dimensions Inside Length)	-
5.2 and Table 1 ii b (Dimensions Inside Width)	-
5.2 and Table 1 iii (Ends per dm )	-
5.2 and Table 1 iv (Picks per dm )	-
5.1 and Table 1 v (Mass of sack )	-
5.2 and Table 1 vi a (Average breaking strength of fabric Lengthwise )	-
5.2 and Table 1 vi b (Average breaking strength of fabric Widthwise )	-

Partial

-
Mech- Excluding UV resistance. Type and material to be declared.

11089

MSME TESTING CENTRE (WR), MUMBAI

IS 7231 (1994)

plastic flushing cisterns for waterclosets and urinals

Discharge capacity from 5liter to 10liter

10500 View breakup
Rs.10,500/- + taxes

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Cistern)	-	2000	2000
Cl 5.2(Cover)	-	2000	2000
Cl 5.3(Flush pipe)	-	2000	2000
Cl 5.3.1(Flush pipe connection to cistern.)	-	2000	2000
Cl 5.4(Inlet and overflow holes)	-	2000	2000
Cl 5.5(Float valve)	-	2000	2000
Cl 5.6(Operating mechanism / lever)	-	2000	2000
(Cl.6)(Finish)	-	1000	1000
(Cl 9.3)(Endurance test)	-	5000	5000
Cl 7.6 & 9.2(Discharge rate )	-	1000	1000

Complete

-
-

11090

BIS, Southern Regional Laboratory (SRL)

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

Rs.3280/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (General Requirement)	-
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-

Partial

-
" 3 x 100 g Excluding determination acidity of extractable fat

11091

BIS, Central Laboratory (CL)

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

- View breakup
Rs 16740/- Excluding Pull Out Test and micro-alloying elements

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9.4 (Load In Other Direction From Bend)	-
Cl 9.3 (Load In One Direction)	-
Cl 8.1 (UTM)	-
Cl 5 (Deformations and Surface Characteristics)	-
Cl 7.2 (Weight)	-
4.1 (Carbon %)	-
4.1 (Sulphur %)	-
4.1 (Phosphorus %)	-
4.1 (Manganese %)	-
4.1 ( Nitrogen%)	-
4.1 (Sulphur and phosphorous)	-
4.1 (CE)	-

Partial

-
Microalloying element/type of killing (element)/any other element to be declared; Excluding -; Pull out test, proof stress

11092

BIS, Eastern Regional Laboratory (ERL)

IS 1061 (2017)

Disinfectant fluids, phenolic type - Specification (Fifth Revision)

Class, Grade and Type to be declared

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.1 (chem) (Composition and Description)	-
4.1.2 (Chem) (Composition and Description)	-
4.4 (Chem) (Mercury Compounds)	-
4.6 (Chem) (Detection of Phenolic Compounds)	-
4.5 (Stability on Storage)	-
4.2 (Stability after Dilution)	-
4.3/3.2 (Germicidal Value)	-
4.3/3.2 (Germicidal Value)	-

Partial

-
To declare Grade, Type and class.

11093

MSME TESTING CENTRE (WR), MUMBAI

IS 12592 (2002)

Precast concrete manhole cover and frame - Specification (First Revision)

LD-2.5, MD-10,HD-20, EHD-35

9000.00 View breakup
Complete test charges

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2 and Table 1(Dimensions of Frame - A)	-	500	Per single dim.500
5.2 and Table 1(Dimensions of Frame - B)	-	500	Per single dim.500
5.2 and Table 1(Dimensions of Frame - C)	-	500	Per single dim.500
5.2 and Table 1(Dimensions of Frame - D)	-	500	Per single dim.500
5.2 and Table 1(Dimensions of Frame - E)	-	500	Per single dim.500
5.2 and Table 1(Dimensions of Frame - F)	-	500	Per single dim.500
5.2(Dimensions of cover- Diameter)	-	500	Per single dim.500
5.2(Clearance at top between the frame and the cover all round the periphery)	-	500	Per single dim.500
5.2(Top surface ofthe frame and cover is in level)	-	500	Per single dim.500
5.2(Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover)	-	500	Per single dim.500
5.2 and Fig 1(Clear cover to reinforcement)	-	500	Per single dim.500
5.2 and Fig 1(Distance of housing from the edge)	-	500	Per single dim.500
7.4.1(Edge Protection and Finishing - Frame)	-	1500	1500
7.4.2(Edge Protection and Finishing - Cover)	-	1500	1500
8(LIFTING HOOKS)	-	500	Per single dim.500
9.3 and Table and Annex C(Load Test)	-	2500	2500

Complete

-
-

11094

BIS, Southern Regional Laboratory (SRL)

IS 1417 (2016)

Gold and gold alloys, jewellery/ artefacts - Fineness and marking - Specification (Fourth Revision)

Rs.1800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Fineness/ Gold Content in parts per thousand, percent)	-
4.1.1 (a) (Presence of Iridium)	-
4.1.1 (a) (Presence of Ruthenium)	-
4.1.1 (a) (Presence of Cadmium)	-
4.1.1 (a) (Presence of Osmium)	-

Complete

-
" 1 gm

11095

BIS, Southern Regional Laboratory (SRL)

IS 17423 (2020)

Medical textiles – Coveralls for COVID 19 – Specification

Rs.3075/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Manufacture - IS 17423)	-
4.1.1 (Manufacture - IS 17423)	-
4.1.1 (Manufacture - IS 17423)	-
4.2 (Manufacture - IS 17423)	-
4.2 (Manufacture - IS 17423)	-
4.3 (Manufacture - IS 17423)	-
4.3 (Manufacture - IS 17423)	-
4.4 (Manufacture - IS 17423)	-
4.4 (Manufacture - IS 17423)	-
4.5 (Manufacture - IS 17423)	-
4.6 (Manufacture - IS 17423)	-
5.1 (Workmanship and Finish - IS 17423)	-
5.1 (Workmanship and Finish - IS 17423)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 1)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 2)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 3)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 1)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 2)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 3)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 1)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 2)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 3)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 1)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 2)	-
Table 1 & Cl.4.4, 5.2 and 5.3) (Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 3)	-

Partial

-
-

11096

BIS, Eastern Regional Laboratory (ERL)

IS 10631 (1983)

Specification for stainless steel for welding electrode core wire

All designations (please see remarks)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table 1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (FREEDOM FROM DEFECTS)	-

Partial

-
Chem- Facility not available for C(<0.05%), S, Nb, Mo (>1.5%). Size and designation to be declared.

11097

BIS, Eastern Regional Laboratory (ERL)

IS 16353 (2015)

Portland Cement Clinker - Specification

Rs. 5700/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5 Table 1 (Ratio of percentage of lime to percentages of silica, alumina and iron oxide)	-
Clause 5 Table 1 (Ratio of percentage of alumina to that of iron oxide,)	-
Clause 5 Table 1 (C3S, percent by mass)	-
Clause 5 Table 1 (C3A, percent by mass)	-
Clause 5 Table 1 (C3S+C2S, percent by mass)	-
Clause 5 Table 1 (Total sulphur content calculated as sulphuric anhydride (SO3))	-
Clause 5 Table 1 (Free lime)	-
Clause 5 Table 1 (Chloride content)	-
Clause 5 Table 1 (Magnesia)	-
Clause 5 Table 1 (Alkali content)	-
Clause 5 Table 1 (Total loss on ignition)	-
Clause 5 Table 1 (Insoluble residue)	-
6.1 Table 2 iii) c) IS 4031 (Part 6) (Compressive Strength at 672±4 h)	-
6.1 Table 2 iii) b) IS 4031 (Part 6) (Compressive Strength at 168±2 h)	-
6.1 Table 2 iii) a) IS 4031 (Part 6) (Compressive Strength at 72±1 h)	-
6.1 Table 2 ii) a) IS 4031 (Part 5) (Initial Setting time)	-
6.1 Table 2 ii) b) IS 4031 (Part 5) (Final Setting time)	-
6.1 Table 2 i) b) IS 4031 (Part 3) (Soundness by Autoclave test method)	-
6.1 Table 2 i) a) IS 4031 (Part 3) (Soundness by Le-Chatelier method)	-
6.1 IS 4031(Part 2) (Fineness)	-
Cl. 5,Table 1 (Insoluble chloride)	-
Cl. 5,Table 1 (Total loss on ignition)	-
Cl. 5,Table 1 (Alkali content,expressed as sodium oxide)	-
Cl. 5,Table 1 (Magnesia)	-
Cl. 5,Table 1 (Chloride content)	-
Cl. 5,Table 1 (Free lime)	-
Cl. 5,Table 1 (Total sulphur content calculated as sulphuric anhydride)	-
Cl. 5,Table 1 (C3S+C2S)	-
Cl. 5,Table 1 (C3A)	-
Cl. 5,Table 1 (C3S)	-
Cl. 5,Table 1 (Ratio of percentage of alumina to that of iron oxide)	-
Cl. 5,Table 1 (Ratio of percentage of lime to percentages of silica, alumina and iron oxide)	-
6.1 Table 3 iii) (Granulometric composition of clinker(Size >50 mm))	-

Partial

-
Chem-Declaration for chloride regarding end use of cement (as per Table 1), Confirmation required for testing Alkali Content.

11098

BIS, Guwahati Branch Laboratory (GBL)

IS 710 (2010)

Marine plywood - Specification (Second Revision)

Rs 11200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11.1 (MARKING)	-
11.2 (MARKING)	-
7.1 (WORKMANSHIP AND FINISH )	-
7.2 (WORKMANSHIP AND FINISH )	-
7.3 (WORKMANSHIP AND FINISH )	-
7.5 (WORKMANSHIP AND FINISH )	-
6.1 (DIMENSIONS)	-
6.1 (DIMENSIONS)	-
6.2 (DIMENSIONS)	-
6.3 (DIMENSIONS)	-
6.3 (DIMENSIONS)	-
9.1.1 (MOISTURE CONTENT)	-
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Average ))	-
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Individual))	-
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test ), 9.1.3.1.1 (Glue Shear Strength: Average))	-
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test) , 9.1.3.1.1 (Glue Shear Strength: Individual))	-
Cl.9.1.5,9.1.3.1.1 (Cl.9.1.5 (Mycological Test),9.1.3.1.1 ( Glue Shear Strength: Average))	-
Cl.9.1.5,9.1.3.1.1 (Cl.9.1.5 (Mycological Test),9.1.3.1.1 (Glue Shear Strength: Individual))	-
Cl. 9.1.4 (Cl. 9.1.4 (Tensile Strength: Parallel to grain))	-
Cl. 9.1.4 (Cl. 9.1.4 (Tensile Strength: Perpendicular to grain))	-
Cl. 9.1.4 (Cl. 9.1.4 (Tensile Strength: Sum of the Tensile Strength in two directions))	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Average))	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
9.1.2 , 9.1.2.2 (Glue Adhesion in Dry State)	-
9.1.3 , 9.1.3.1.2 (Water resistance test)	-
9.1.5 , 9.1.3.1.2 (Mycological test)	-
cl.5.1 (manufacture - Veneers - moisture content)	-
cl.5.1.1 (manufacture - Veneers - Defects in Veneers)	-
cl.5.2.2 (Assembly - Thickness of Veneers)	-
9.1.8 (Retention of preservative)	-

Partial

-
-

11099

BIS, Southern Regional Laboratory (SRL)

IS 15354 : Part 1 (2018)

Single - Use medical examination gloves: Part 1 specification for gloves made from rubber latex or rubber solution (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 & Table 2 (Size code)	-
6.1 & Table 2 (Width corresponding to size code (dimension w,Figure 1))	-
6.1 & Table 2 (Descriptive size)	-
6.1 & Table 2 (Width corresponding to Descriptive size (dimension w,Figure 1))	-
6.1 & Table 2 (Minimum length (dimension l, Figure 1))	-
6.1 & Table 2 (Minimum thickness (at locations shown in Figure 2))	-
6.1 & Table 2 (Maximum thickness (at approximate centre of palm))	-
6.3.2 & Table 3 (Minimum force at break before accelerated ageing)	-
6.3.2 & Table 3 (Minimum Elongation at break before accelerated ageing)	-
6.3.3 & Table 3 (Minimum force at break after accelerated ageing)	-
6.3.3 & Table 3 (Minimum Elongation at break after accelerated ageing)	-

Complete

-
" Mech - 10 pairs

11100

BIS, Southern Regional Laboratory (SRL)

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

- View breakup
Rs.7050/- (For Grade-1, 2 & 3). Rs.10050/- (For Grade 4, 5 & 6 including Micro alloying elements)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 & Table 3 (UTM)	-
Cl 11 (Workmanship)	-
Cl 12 & 13 (Length, Width & Thickness)	-

Partial

-
" 0.5 sq.m Excluding Bend test and chemical test not available(Prepared test pieces are required for Tensile Test)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number