BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15361 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

1081

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 5557 : Part 1 (2024)

All Rubber Gum Boots and Ankle Boots Part 1 Safety and Protective

ALL

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Design)	-	250	-
6(Sizes and Fittines)	-	250	-
7(Consturction)	-	250	-
8.1(Lining Material)	-	250	-
8.2, Table-1 (i)(Width, mm, Min)	-	500	-
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	1000	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	500	-
8.4(Use of Rubber material)	-	250	-
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	1000	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	1500	-
8.5(Upper material)	-	250	-
8.5.1(Tensile Strength of upper)	-	1000	-
8.5.2(Thickness)	-	500	-
8.5.3(Flexing Resistance)	-	1500	-
8.5.4(Abrasion Resistance)	-	1000	-
8.6.1(Thickness of Outsole)	-	250	-
8.6.2(Tear Strength)	-	1000	-
8.6.3(Abrasion Resistance of Outsole)	-	1200	-
8.6.4(Flexing Resistance)	-	500	-
8.6.5(Inter layer Bond Strength of outsole)	-	1000	-
Cl-8.7(Insocks material)	-	250	-
8.7.1(Thickness of Insocks)	-	500	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	1000	-
Cl-8.8.1(Outsole/Heel)	-	1000	-
Cl-8.9(Leak Proof Test)	-	1200	-
8.10(Height of Upper)	-	500	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	1000	-
Cl-8.12(Upper Outsole Bond Strength)	-	1000	-
Cl-8.13(Internal Length of Toe Cap)	-	500	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	1000	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	1000	-
8.16(Banned Chemicals)	-	15000	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	1000	-
8.17(Steel Floor with Glycerine)	-	1000	-
8.18(Corrosion Resistant Test for Toe Caps)	-	1000	-
9.1(Penetration Resistance)	-	1000	-
9.2(Antistatic Footwear)	-	1500	-
9.3(Flame Resistance Property)	-	0	-
9.4(Electrical Resistance)	-	0	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	1000	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	1000	-
9.6(Resistance to Fuel Oil)	-	1000	-
11.2(Marking)	-	250	-

-
Included w.e.f. 01.04.2026 Exclusion: "9.3 (Flame Resistance Property) 9.4 (Electrical Resistance)"

1082

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 2266 (2024)

STEEL WIRE ROPES FOR GENERAL ENGINEERING PURPOSE - SPECIFICATION (Sixth Revision)

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Minimum breaking force)	-	4000	-
Cl-6(Wire rope)	-	6500	-
Cl-7(Construction)	-	1500	-
Cl-8.1(Fibre Core)	-	2500	-
Cl-8.2(Steel Core)	-	2500	-
Cl-9(Joints)	-	1500	-
Cl-10(Galvanizing)	-	4500	-
Cl-12(Marking)	-	500	-
Cl-4(Rope size and Tolerance)	-	3500	-
Cl-5(Minimum breaking force)	-	0	-
Cl-6(Wire rope)	-	0	-
Cl-7(Construction)	-	0	-
Cl-8.1(Fibre Core)	-	0	-
Cl-8.2(Steel Core)	-	0	-
Cl-9(Joints)	-	0	-
Cl-10(Galvanizing)	-	0	-
Cl-12(Marking)	-	0	-
Cl-4(Rope size and Tolerance)	-	0	-
Cl-5(Minimum breaking force)	-	-	-
Cl-6(Wire rope)	-	-	-
Cl-7(Construction)	-	-	-
Cl-8.1(Fibre Core)	-	-	-
Cl-8.2(Steel Core)	-	-	-
Cl-9(Joints)	-	-	-
Cl-10(Galvanizing)	-	-	-
Cl-12(Marking)	-	-	-
Cl-4(Rope size and Tolerance)	-	-	-
Cl-6 of IS 1835,(Carban)	-	-	-
Cl-6 of IS 1835(Manganese)	-	-	-
Cl-6 of IS 1835(Silicon)	-	-	-
Cl-6 of IS 1835(Sulphur, Max)	-	-	-
Cl-6 of IS 1835(Phosphorus, Max)	-	-	-
Cl-6 of IS 1835(Copper, Max)	-	-	-
Cl-6 of IS 1835(Nickel, Max)	-	-	-
Cl-6 of IS 1835(Chromium, Max)	-	-	-

-
Included w.e.f 09.02.2026

1083

SGS India Pvt Ltd, Gurgaon (8136216)

8136216

IS 17633 (2022)

Tables and Desks - Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 4(Design and workmanship)	-	1000	-
ClAUSE 5(Dimensions)	-	1000	-
CLAUSE 6(SURFACE PERFORMANCE REQUIRMENTS)	-	12000	-
CLAUSE 7.2.1(Stability Under Vertical Load)	-	1000	-
CLAUSE 7.2.1.1(Test for tables that can be set to a height of 950 mm or less)	-	1000	-
CLAUSE 7.2.1.2(" Test for Tables that can be set to a height greater than 950 mm")	-	1000	-
CLAUSE 7.2.2(Stability with Extension Elements Open Place the table on the floor surface)	-	1000	-
CLAUSE 7.2.3(Stability Under Horizontal Load)	-	1000	-
CLAUSE 7.2.3.1(Test for tables that can be set to a height of 950 mm or less)	-	1000	-
CLAUSE 7.2.3.2(" Test for Tables that can be set to a height greater than 950 mm")	-	2000	-
CLAUSE 7.3.1(Strength under Vertical Static Force)	-	2000	-
CLAUSE 7.3.1.1(Stated load)	-	2000	-
CLAUSE 7.3.1.2(For occasional heavy loads)	-	2000	-
CLAUSE 7.3.2(Strength under horizontal static force)	-	2000	-
CLAUSE 7.4.1(Durability under Vertical Force)	-	8000	-
CLAUSE 7.4.2(Durability of the Height Adjustment Mechanism)	-	8000	-
CLAUSE 7.5.1(Durability and Stiffness Under Horizontal Force)	-	8000	-
CLAUSE 7.5.2(Durability under Horizontal Force)	-	8000	-
CLAUSE 7.5.3(Stiffness of the Structure Under Horizontal Force)	-	3000	-
CLAUSE 7.6.1(Vertical Impact Test)	-	1000	-
CLAUSE 7.6.2(Vertical Impact Test for Glass Table Tops)	-	2000	-
CLAUSE 7.6.3(Vertical Impact Test for All Other Table Tops)	-	2000	-
CLAUSE 7.7(Deflection of Table Tops)	-	2000	-
CLAUSE 7.8(Durability of Tables with Castors)	-	8000	-
CLAUSE 7.9(Drop Test)	-	2000	-
Cl - 5(Dimensions)	-	1000	-
Cl-7.2.1(Stability Under Vertical Load)	-	1000	-
Cl-7.2.2(Stability with Extension Elements Open)	-	1000	-
Cl-7.2.3(Stability Under Horizontal Load)	-	1000	-
Cl-7.3.1(Strength under Vertical Static Force)	-	2000	-
Cl-7.3.2(Strength under horizontal static force)	-	2000	-
Cl-7.4.1(Durability under Vertical Force)	-	8000	-
Cl-7.4.2(Durability of the Height Adjustment Mechanism)	-	8000	-
Cl-7.5.1(General)	-	1000	-
Cl-7.5.2(Durability under Horizontal Force)	-	8000	-
Cl-7.5.3(Stiffness of the Structure Under Horizontal Force)	-	3000	-
Cl-7.6.1(General)	-	1000	-
Cl-7.6.2(Vertical Impact Test for Glass Table Tops)	-	2000	-
Cl-7.6.3(Vertical Impact Test for All Other Table Tops)	-	2000	-
Cl-7.7(Deflection of Table Tops)	-	2000	-
Cl-7.8(Durability of Tables with Castors)	-	8000	-
Cl-7.9(Drop Test)	-	200	-
Cl-9(Marking)	-	300	-
7.1(General test conditions)	-	1000	-
Cl-6 (a)(Resistance to mechanical damage)	-	0	Parameter removed in amd.1 IS 17633 amd1 2025.
Cl-6 (b)(Pencil hardness)	-	1000	-
Cl-6 (c)(Resistance to wet heat)	-	2000	-
Cl-6 (d)(Resistance to dry heat)	-	2000	-
Cl-6 (e)(Resistance to marking by cold liquids)	-	3000	-
Cl-6 (f)(Resistance to marking by cold oils and fats)	-	3000	-
Cl-6 (g)(Adhesive performance)	-	2000	-

31 Dec, 2026

-
included w.e.f 01.04.2026

1084

Urja Metallurgical Services LLP

7194806

IS 17875 (2022)

Stainless Steel seamless pipes and tubes for general service

All Grade / Type / Size / Designation / Class

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	1500	-
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	1500	-
11(Transverse Tension Test,%)	-	1500	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	1200	-
13 (Table No.- 7)(Flaring Test)	-	1000	-
14(Flattaning Test-IS 2328)	-	1000	-
15.1 (Table No.- 8)(Grain Size,No.-IS 4748)	-	1500	-
17(Leak Tighteness Test)	-	1000	-
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	1500	-
19(Eddy current test & Air under water)	-	500	-
21(Workmanship, Finish and Appearance)	-	500	-
22(Repair by Welding or Grinding)	-	500	-
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	500	-
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	1500	-
Clause 10.1 - Table 4(Tensile Strength)	-	1500	-
Clause 10.1 - Table 4(Percent Elongation)	-	1500	-
Clause 11(Transverse Tension Test)	-	1500	-
Clause 12(Hardness Test)	-	1200	-
Clause 13(Flaring Test)	-	1000	-
Clause 14(Flattening Test)	-	1000	-
Clause 15(Grain Size)	-	1500	-
Clause 17(Leak Tightness Test)	-	1000	-
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	1500	-
Clause 21(Workmanship, Finish & Appearance)	-	500	-
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	500	-
10.2(Hardness test IS 1500 (part-1):2019)	-	1000	-
12.2(Flaring test IS 17878:2022)	-	1000	-
16(Sampling)	-	500	-
24(Marking)	-	100	-
"Clause 8.1 and 8.2 - Table 1"(W)	-	500	-
"Clause 8.1 and 8.2 - Table 1"(Ta)	-	500	-
"Clause 8.1 and 8.2 - Table 2"(V)	-	500	-

23 Dec, 2028

-
Included w.e.f 27.01.2026 Exclusion: Cl 19 (Eddy current test & Air under water)

1085

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	3000	-
Cl-7(Marking and instructions)	-	4000	-
Cl-8(Protection against access to live parts)	-	4000	-
Cl-10(Power input and current)	-	5000	-
Cl-11(Heating)	-	5000	-
Cl-12(Charging of metal-ion batteries)	-	5000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	4000	-
Cl-14(Transient overvoltages)	-	5000	-
Cl-15(Moisture resistance)	-	7000	-
Cl-16(Leakage current and electric strength)	-	4000	-
Cl-17(Overload protection of transformers and associated circuits)	-	4000	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	4000	-
Cl-20(Stability and mechanical hazards)	-	5000	-
Cl-21(Mechanical strength)	-	5000	-
Cl-22(Construction)	-	5000	-
Cl-23(Internal wiring)	-	5000	-
Cl-24(Components)	-	5000	-
Cl-25(Supply connection and external flexible cords)	-	7000	-
Cl-26(Terminals for external conductors)	-	4000	-
Cl-27(Provision for earthing)	-	5000	-
Cl-28(Screws and connections)	-	4000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	4000	-
Cl-30(Resistance to heat and fire)	-	5000	-
Cl-31(Resistance to rusting)	-	4000	-
Cl-32(Radiation, toxicity and similar hazards)	-	4000	-

14 Nov, 2027

-
Included w.e.f 17.02.2026 Exclusion: Cl-19.11.4.1 -19.11.4.7(EMI/EMC)

1086

Fluid Control Research Institute

6114324

IS 13095 (2020)

Butterfly Valves for General Purposes ( First Revision )

11800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
17.2(Body Test)	-	1500	Nil
17.3(Seat Test)	-	1200	Nil
17.4(Disc Strength Test)	-	6400	Nil
7(NOMINAL PRESSURES)	-	1500	Leakage Test
17.2(Body Test)	-	1500	Nil
17.3(Seat Test)	-	1200	Nil
17.4(Disc Strength Test)	-	6400	Nil
7.0(NOMINAL PRESSURES)	-	1500	Leak Test
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-	1200	Nil

06 Dec, 2028

-
-

1087

Fluid Control Research Institute

6114324

IS 779 (1994)

Water meters (Domestic Type) - Specification (Sixth Revision)

69500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Pressure tightness)	-	1600	Nil
10.2(Loss of pressure)	-	1600	Nil
11.1(Metering Accuracy)	-	1600	Nil
11.2(Min. Starting flow)	-	1600	Nil
10.3(Temp. suitability )	-	1600	Nil
12.4.2(Construction)	-	0	Same as clause 12.4.3
12.4.4(Life test )	-	59900	Testing charge mentioned is for DN15.
12.4.3(Construction)	-	800	Nil
9.1, table 2(i)Threads )	-	800	Nil
9.1, table 5(iii) Overall Length (with nipple))	-	0	Same as clause 9.1
9.1, table 6(iv)Overall Width )	-	0	Same as clause 9.1
9.1, table 7(v)Overall Height H1)	-	0	Same as clause 9.1
9.1, table 8( H2 )	-	0	Same as clause 9.1

06 Dec, 2028

-
Exclusion: a)Material test(Cl.6.1) b) Test facility for 9.1, table 2 i)Threads is not adequate. The same may be excluded from the scope of renewal of the lab. Testing charges is capped at Rs 41100

1088

MORBI TEST HOUSE LLP

7195306

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

Construction Water only, Compressive Strength only and Aggregate olny

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	2000	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	1500	-
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	1500	-
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	2000	-
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	2000	-
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	1000	-
5.4.2-IS: 3025(P-11)(Ph)	-	1000	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	1000	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	1000	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	2000	-
Cl 5.4 Table 1 (iv)(Chloride)	-	1500	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	2000	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	2000	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	1000	-
Cl 5.4 .2(pH)	-	1000	-
Cl 5.4 (b)(Alkalinity)	-	1000	-
Cl 5.4 (a)(Acidity)	-	1000	-
16.1(Average Compressive Strength)	-	2000	-
16.1(Compressive Strength of Individual Samples )	-	2000	-
16.1(Compressive Strength of Individual Samples )	-	2000	-
16.1(Compressive Strength of Individual Samples )	-	2000	-
Clause 5.4(Description)	-	500	-
5.3(Aggregates)	-	14000	Construction Water + Hardened Concerete Cement Cube + Aggregate = 12000 + 2000 + 14000
5.7(Storage of Materials)	-	500	-

02 Jan, 2029

-
Included w.e.f. 13.01.2025 "For Construction Water only For Compressive Strength only"

1089

PLANET ANALYSIS PRIVATE LIMITED, KANPUR

9125906

IS 17286 (2019)

Textiles – Water-proof multipurpose rain poncho with convertibility as bivouac – Specification

33000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(STITCHING)	-	0	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 4.1(Tolerances)	-	0	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.4(Slide fastener)	-	12000	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.5(Hook and loop fastener)	-	8000	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	500	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	500	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (iii)(Width, cm)	-	150	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	125	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	125	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	300	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	500	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	500	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	500	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	400	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	500	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	1000	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	250	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	800	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	750	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xvi)(Resistance to damage by flexing (after 100,000 cycle))	-	750	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xvii)(Blocking)	-	500	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	300	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	250	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	300	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xxi)(Bundesmann-shower test (Double layers as used in the poncho- face side- uncoated), (Expose the specimen to the shower for 30 min): a) Amount of water absorption, Max, percent)	-	500	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xxi)(b) Amount of water penetration, ml 23514)	-	250	TESTING CHARGES COVERED UNDER CLAUSE BWR TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xxi)(c) Wetting of inner surface)	-	250	TESTING CHARGES COVERED UNDER CLAUSE BWR TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	1000	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	500	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	500	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	750	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 6.2, Table 2 (ii)(Length, cm)	-	150	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	300	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	500	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	400	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	1000	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	300	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	300	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	750	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	150	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	300	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 6.3, Table 3 (iv)(Width, cm)	-	150	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	300	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	400	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	1000	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 7(MARKING)	-	0	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 8(PACKING)	-	0	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
3(MATERIAL AND MANUFACTURE)	-	0	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
5(Freedom from defect)	-	0	TESTING CHARGES Rs. 33000.00 5 % DISCOUNT ON TOTAL TESTING CHARGES TO BIS SAMPLES ONLY
Clause 4(STITCHING)	-	0	Repeated Clause
Clause 4.1(Tolerances)	-	0	Repeated Clause
Clauses 6.4(Slide fastener)	-	0	Repeated Clause
Clauses 6.5(Hook and loop fastener)	-	0	Repeated Clause
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	0	Repeated Clause
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	0	Repeated Clause
Clauses 6.1, Table 1 (iii)(Width, cm)	-	0	Repeated Clause
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	0	Repeated Clause
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	0	Repeated Clause
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	0	Repeated Clause
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	0	Repeated Clause
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	0	Repeated Clause
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	0	Repeated Clause
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated Clause
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	0	Repeated Clause
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	0	Repeated Clause
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	0	Repeated Clause
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	0	Repeated Clause
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	0	Repeated Clause
Clauses 6.1, Table 1 (xvi)(Resistance to damage by flexing (after 100,000 cycle))	-	0	Repeated Clause
Clauses 6.1, Table 1 (xvii)(Blocking)	-	0	Repeated Clause
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	0	Repeated Clause
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	0	-
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	0	Repeated Clause
Clauses 6.1, Table 1 (xxi)(Bundesmann-shower test (Double layers as used in the poncho- face side- uncoated), (Expose the specimen to the shower for 30 min): a) Amount of water absorption, Max, percent)	-	0	Repeated Clause
Clauses 6.1, Table 1 (xxi)(b) Amount of water penetration, ml 23514)	-	0	Repeated Clause
Clauses 6.1, Table 1 (xxi)(c) Wetting of inner surface)	-	0	Repeated Clause
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	0	Repeated Clause
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	0	Repeated Clause
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	0	Repeated Clause
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	0	Repeated Clause
Clause 6.2, Table 2 (ii)(Length, cm)	-	0	Repeated Clause
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	0	Repeated Clause
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	0	Repeated Clause
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated Clause
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	0	Repeated Clause
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	0	Repeated Clause
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	0	Repeated Clause
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	0	Repeated Clause
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	0	Repeated Clause
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	0	Repeated Clause
Clause 6.3, Table 3 (iv)(Width, cm)	-	0	Repeated Clause
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	0	Repeated Clause
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated Clause
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	0	Repeated Clause
Clause 7(MARKING)	-	0	Repeated Clause
Clause 8(PACKING)	-	0	Repeated Clause
3(MATERIAL AND MANUFACTURE)	-	0	Repeated Clause
5(Freedom from defect)	-	0	Repeated Clause

20 Jan, 2028

-
Included w.e.f 17.02.2026

1090

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 16186 (2014)

Textiles - Light weight jute sacking bags for packing 50 kg foodgrains - Specification

TYPE-A & B

8400.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Manufacture- IS16186)	-	0	-
4.1(Fabric)	-	500	-
4.1(i)The bags shall be made from single piece of 2/1 twill weave jute sacking of uniform construction with warp running along the length of the bag. )	-	500	-
4.1(ii) The mass per square meter of sacking used in the fabric of the bag 504 g.)	-	500	-
4.2(Seam-IS 9113 (Cl.5.1.2))	-	500	-
4.2.i)( Type of stitches Herakle )	-	500	-
4.2.ii)( Jute twine for stitches Two strands of 3-ply )	-	500	-
4.2.iii)( Stitches/dm 10 ± 1 )	-	500	-
4.2.iv)(Tex of jute twine [ IS 9113 (Cl.5.1.2) ] 310 tex.X 3-ply )	-	500	-
4.3(Union Safety Stitch-IS 9113 (Cl.5.1.2))	-	500	-
4.3.i)( Stitches/dm 10 ± 1 )	-	500	-
4.3.ii)(Tex of jute twine )	-	500	-
4.3( 310 tex.X 2-ply )	-	500	-
4.4(Hemming at the mouth-IS 9113 (Cl.5.1.2))	-	500	-
4.4(Fabric shall be hemmed with jute yarn of 310 tex )	-	500	-
4.5(Freedom from defects)	-	500	-
4.5, Annex A(GAW)	-	500	-
4.5, Annex A(Multiple broken/missing warp(end)-Two or more contiguous, regardless of length )	-	500	-
4.5, Annex A(Multiple broken weft(pick))	-	500	-
4.5, Annex A(Cut, hole, tear or patch-Two or more warp thread ruptured at adjoining points )	-	500	-
4.5, Annex A(Float-Fabric where warp and weft yarns escape)	-	500	-
4.5, Annex A(Gap stitching-Stitching missing)	-	500	-
4.5, Annex A(Corner gap-Hole formation due to improper stitching at the corner of the bag )	-	500	-
4.5, Annex A(Mildew-Staining of fabric due to fungal or bacterial growth visible to naked eye)	-	500	-
4.1 & 5.1, Table 1(Dimension-IS 9113 (Cl.8.3.2))	-	500	-
4.1 & 5.1, Table 1(Outside Length, cm )	-	500	Dimension Include Outside Length & Width: 500/-
4.1 & 5.1, Table 1(Outside Width, cm )	-	500	-
4.1 & 5.1, Table 1(Ends /dm-IS 9113 (Cl.8.4.2))	-	500	-
4.1 & 5.1, Table 1(Picks/dm-IS 9113 (Cl.8.4.2))	-	500	-
4.1 & 5.1, Table 1(Corrected Mass/Bag,g-IS 9113 (Cl.8.5.2))	-	500	-
4.1 & 5.1, Table 1(Average Breaking Strength in N)	-	1600	test charges: 1100/- & Sample Preparation: 500/-
4.1 & 5.1, Table 1(Warpway -IS 9113 (Cl.8.6.2))	-	1600	test charges: 1100/- & Sample Preparation: 500/-
4.1 & 5.1, Table 1(Weftway-IS 9113 (Cl.8.6.2))	-	1600	test charges: 1100/- & Sample Preparation: 500/-
4.1 & 5.1, Table 1(Average Seam Strength in N-IS 9113 (Cl.8.7))	-	1600	test charges: 1100/- & Sample Preparation: 500/-
4.1 & 5.1, Table 1(Moisture Regain, Percent-IS 9113 (Cl.8.2))	-	700	-
4.1 & 5.1, Table 1(Oil content, Percent-IS 9113 (Cl.8.5.2))	-	700	-

-
Included w.e.f. 22.01.2026

1091

Unique Test House LLP

9134536

IS 1726 (1991)

Cast iron manhole covers and frames - Specification (Third Revision)

ALL SIZES

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GRADES )	-	200	..........
3(TYPES)	-	200	............
5.1.1(Covers and Frames)	-	400	..............
5.1.2(Covers and Frames)	-	400	..............
5.1.2(The rise of the chequer)	-	400	.........
5.2(Key Holes and Keys)	-	400	.......
5.2 and Fig.1 (Key Holes and Keys)	-	400	........
5.2 and Fig.1 (Key Holes and Keys)	-	400	......
5.2 and Fig.1 (Key Holes and Keys)	-	400	......
5.2 and Fig.1 (Key Holes and Keys)	-	400	......
5.2 and Fig.1 (Key Holes and Keys)	-	400	......
5.2 and Fig.1 (Key Holes and Keys)	-	400	........
5.2 and Fig.1 (Key Holes and Keys)	-	400	.........
5.2 and Fig.1 (Key Holes and Keys)	-	400	........
5.2 and Fig.1 (Key Holes and Keys)	-	400	.......
5.2 and Fig.1 (Key Holes and Keys)	-	400	.....
5.2 and Fig.1 (Key Holes and Keys)	-	400	...........
5.2 and Fig.1 (Key Holes and Keys)	-	400	..............
5.2 and Fig.1 (Key Holes and Keys)	-	400	............
5.2 and Fig.1 (Key Holes and Keys)	-	400	...............
5.2 and Fig.1 (Key Holes and Keys)	-	400	...................
5.2 and Fig.1 (Key Holes and Keys)	-	400	...............................
5.2 and Fig.1 (Key Holes and Keys)	-	400	............
5.2 and Fig.1 (Key Holes and Keys)	-	400	..............
5.2 and Fig.1 (Key Holes and Keys)	-	400	..................
5.2 and Fig.1 (Key Holes and Keys)	-	400	.....................
5.2 and Fig.1 (Key Holes and Keys)	-	100	..............
5.2 and Fig.2(Key Holes and Keys )	-	100	.......
5.2 and Fig.2(Key Holes and Keys )	-	200	.......
5.2 and Fig.2(Key Holes and Keys )	-	200	.............
5.2 and Fig.2(Key Holes and Keys )	-	200	.....................................................
5.2 and Fig.2(Key Holes and Keys )	-	200	............................................................................................
5.2 and Fig.2(Key Holes and Keys )	-	200	...............................................................................................
5.3(Locking Devices)	-	500	...............
6 and Table 1(PERFORMANCE REQUIREMENTS - Clear opening of frame O X O1)	-	500	.................
6 and Table 1(PERFORMANCE REQUIREMENTS - fd)	-	500	............
6 and Table 1(PERFORMANCE REQUIREMENTS - S)	-	200	............
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O)	-	200	.............
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O1)	-	400	........
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F)	-	400	.........
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F1)	-	400	..............
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f)	-	400	..........
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f1)	-	400	...........
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Fd)	-	400	............
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - fd)	-	400	.............
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - S)	-	400	..........
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t)	-	400	.....
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t1)	-	400	..........
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C)	-	400	............
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C1)	-	400	......
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T)	-	400	.....
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T1)	-	400	........
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Clearence (C1))	-	400	..........
8(COATING - At 63˚C)	-	400	............
8(COATING - At 0˚C)	-	400	..............
10 and Table 3(LOAD TEST)	-	400	....................
3(GRADES )	-	400	.........
3(TYPES)	-	400	...........
5.1.1(Covers and Frames)	-	20	.........
5.1.2(Covers and Frames)	-	200	...............
5.1.2(The rise of the chequer)	-	200	......
5.2(Key Holes and Keys)	-	200	...........
5.2 and Fig.1 (Key Holes and Keys)	-	200	......
5.2 and Fig.1 (Key Holes and Keys)	-	200	.......
5.2 and Fig.1 (Key Holes and Keys)	-	200	...........
5.2 and Fig.1 (Key Holes and Keys)	-	200	............
5.2 and Fig.1 (Key Holes and Keys)	-	200	........
5.2 and Fig.1 (Key Holes and Keys)	-	200	........
5.2 and Fig.1 (Key Holes and Keys)	-	200	........
5.2 and Fig.1 (Key Holes and Keys)	-	200	.........
5.2 and Fig.1 (Key Holes and Keys)	-	200	........
5.2 and Fig.1 (Key Holes and Keys)	-	200	.......
5.2 and Fig.1 (Key Holes and Keys)	-	200	......
5.2 and Fig.1 (Key Holes and Keys)	-	200	......
5.2 and Fig.1 (Key Holes and Keys)	-	200	.....
5.2 and Fig.1 (Key Holes and Keys)	-	200	.....
5.2 and Fig.1 (Key Holes and Keys)	-	200	.......
5.2 and Fig.1 (Key Holes and Keys)	-	200	..........
5.2 and Fig.1 (Key Holes and Keys)	-	200	........
5.2 and Fig.1 (Key Holes and Keys)	-	200	......
5.2 and Fig.1 (Key Holes and Keys)	-	200	....
5.2 and Fig.1 (Key Holes and Keys)	-	200	......
5.2 and Fig.1 (Key Holes and Keys)	-	200	.......
5.2 and Fig.2(Key Holes and Keys )	-	200	.....
5.2 and Fig.2(Key Holes and Keys )	-	200	......
5.2 and Fig.2(Key Holes and Keys )	-	200	.........
5.2 and Fig.2(Key Holes and Keys )	-	200	.........
5.2 and Fig.2(Key Holes and Keys )	-	200	........
5.2 and Fig.2(Key Holes and Keys )	-	200	......
5.3(Locking Devices)	-	200	....
6 and Table 1(PERFORMANCE REQUIREMENTS - Clear opening of frame O X O1)	-	200	.......
6 and Table 1(PERFORMANCE REQUIREMENTS - fd)	-	200	.........
6 and Table 1(PERFORMANCE REQUIREMENTS - S)	-	200	.........
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O)	-	200	........
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O1)	-	200	.....
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F)	-	200	.....
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F1)	-	200	.......
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f)	-	200	.....
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f1)	-	200	.....
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Fd)	-	200	....
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - fd)	-	200	.......
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - S)	-	200	......
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t)	-	200	............
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t1)	-	200	..................
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C)	-	200	...........
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C1)	-	200	.............
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T)	-	200	......
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T1)	-	200	..........
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Clearence (C1))	-	200	.................
8(COATING - At 63˚C)	-	200	.....
8(COATING - At 0˚C)	-	200	........
10 and Table 3(LOAD TEST)	-	200	...............
3(GRADES )	-	-	-
3(TYPES)	-	-	-
5.1.1(Covers and Frames)	-	-	-
5.1.2(Covers and Frames)	-	-	-
5.1.2(The rise of the chequer)	-	-	-
5.2(Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.1 (Key Holes and Keys)	-	-	-
5.2 and Fig.2(Key Holes and Keys )	-	-	-
5.2 and Fig.2(Key Holes and Keys )	-	-	-
5.2 and Fig.2(Key Holes and Keys )	-	-	-
5.2 and Fig.2(Key Holes and Keys )	-	-	-
5.2 and Fig.2(Key Holes and Keys )	-	-	-
5.2 and Fig.2(Key Holes and Keys )	-	-	-
5.3(Locking Devices)	-	-	-
6 and Table 1(PERFORMANCE REQUIREMENTS - Clear opening of frame O X O1)	-	-	-
6 and Table 1(PERFORMANCE REQUIREMENTS - fd)	-	-	-
6 and Table 1(PERFORMANCE REQUIREMENTS - S)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O1)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F1)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f1)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Fd)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - fd)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - S)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t1)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C1)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T1)	-	-	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Clearence (C1))	-	-	-
8(COATING - At 63˚C)	-	-	-
8(COATING - At 0˚C)	-	-	-
10 and Table 3(LOAD TEST)	-	-	-

07 Sep, 2028

-
Included w.e.f. 14.01.2026

1092

Unique Test House LLP

9134536

IS 15380 (2023)

MOULDED HIGH DENSITY FIBRE HDF PANELLED DOOR SHUTTERS - SPECIFICATION ( First Revision )

ALL SIZES

25000 View breakup
-

07 Sep, 2028

-
Included w.e.f. 14.01.2026

1093

MORBI TEST HOUSE LLP

7195306

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

All Grade M-30, M-35, M-40, M-50, M-55 / All Thickness / Single and Double layer (Group I and Group II)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	3000	-
Clause 7.3, Annex G(Average Breaking Load)	-	2000	-
Clause 7.3, Annex G(Individual Breaking Load)	-	2000	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	2000	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	500	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	500	-
Clause 7.1.3 (Colour and Texture)	-	500	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	500	-
Clause 7.1.1 (General Quality)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	500	-
Clause 3.20(Spacer nibs)	-	500	-
10(Marking)	-	500	-
5.4(Coarse and Fine Aggregates)	-	12000	Paving Block + aggregate = 14000 + 12000
5.6(Water)	-	7000	Paving Block + Construction Water = 14000 + 7000
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength (ii))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength - (iii))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength -(iv))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength - (v))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (ii))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (iii))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (ii))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (iii))	-	2000	-

02 Jan, 2029

-
Included w.e.f. 13.01.2025 Exclusion: cl.5 (Cement), 5.2 (Mineral Admixture), 5.3 (Chemical Admixtures), 5.5 (Pigments)

1094

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

1250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.3, Table-1(Breaking load before stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.3, Table-1(Breaking load after stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.4(Wrapping test)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.5, Table 1(Resistance test)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.6, Table 3(Measurement of lay ratio)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
9.3(Stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
6(Freedom from defects)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
7.2.1(Sizes)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
9.2(Lay ratio)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
9.4(Multiple layer of wires)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.1(Resistivity)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.2(Density)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.4(Coefficient of Linear Expansion)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
5(Material)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
7.1.1(Nominal Sizes)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
7.2.2(Resistance)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.3, Table-1(Breaking load before stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.3, Table-1(Breaking load after stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.4(Wrapping test)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.5, Table 1(Resistance test)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
12.6, Table 3(Measurement of lay ratio)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
9.3(Stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
6(Freedom from defects)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
7.2.1(Sizes)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
9.2(Lay ratio)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
9.4(Multiple layer of wires)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.1(Resistivity)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.2(Density)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
4.4(Coefficient of Linear Expansion)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
5(Material)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
7.1.1(Nominal Sizes)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding
7.2.2(Resistance)	-	500	Rs.1250/- for 7 strands, Rs. 3100/- for 19 strands (For BIS only) Rs.1000/- for Separated Wire before Stranding

-
Included w.e.f 17.02.2026

1095

Samridhi Test House Pvt. Ltd.

8184706

IS 444 (2025)

Rubber Hoses, Textile-Reinforced, for General-Purpose Water Applications - Specification (Sixth Revision)

All Grade / Type / Size / Designation

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Material and Construction)	-	300	-
Cl-6.1(Internal diameters and tolerances)	-	200	-
Cl-6.2(Concentricity)	-	300	-
Cl-6.3(Tolerance of length)	-	200	-
Cl-6.4(Minimum thickness of lining and cover)	-	300	-
Cl-7.1, Table-2 (i)(Minimum tensile strength)	-	800	-
Cl-7.1, Table-2 (ii)(Minimum elongation at break)	-	800	-
Cl-7.1, Table-2 (iii)("Resistance to ageing: Change in tensile strength from original value (max) . Change in elongation at break from original value (max)")	-	1100	-
Cl-7.2, Table-3 (i)(Proof pressure at 23 0 C)	-	450	-
Cl-7.2, Table-3 (ii)(Change in length at proof pressure)	-	400	-
Cl-7.2, Table-3 (iii)(Minimum burst pressure)	-	500	-
Cl-7.2, Table-3 (iv)(Adhesion between component)	-	500	-
Cl-7.2, Table-3 (vi)(Flexibility at 23ºC)	-	400	-
Cl-7.2, Table-3 (vii)(Low-temperature flexibility)	-	800	-
Cl-8(Marking)	-	200	-
Cl-5(Material and Construction)	-	0	-
Cl-6.1(Internal diameters and tolerances)	-	0	-
Cl-6.2(Concentricity)	-	0	-
Cl-6.3(Tolerance of length)	-	0	-
Cl-6.4(Minimum thickness of lining and cover)	-	0	-
Cl-7.1, Table-2 (i)(Minimum tensile strength)	-	0	-
Cl-7.1, Table-2 (ii)(Minimum elongation at break)	-	0	-
Cl-7.1, Table-2 (iii)("Resistance to ageing: Change in tensile strength from original value (max) . Change in elongation at break from original value (max)")	-	0	-
Cl-7.2, Table-3 (i)(Proof pressure at 23 0 C)	-	0	-
Cl-7.2, Table-3 (ii)(Change in length at proof pressure)	-	0	-
Cl-7.2, Table-3 (iii)(Minimum burst pressure)	-	0	-
Cl-7.2, Table-3 (iv)(Adhesion between component)	-	0	-
Cl-7.2, Table-3 (vi)(Flexibility at 23ºC)	-	0	-
Cl-7.2, Table-3 (vii)(Low-temperature flexibility)	-	0	-
Cl-8(Marking)	-	0	-
Cl-7.2, Table-3 (v)(Ozone resistance)	-	500	-

-
Included w.e.f 17.03.2026

1096

BIS, Western Regional Laboratory (WRL)

None

IS 330 (2023)

CHROMIUM TRIOXIDE - SPECIFICATION Third Revision

4430 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Description)	-
Cl-4.2 (Solubility)	-
Cl-4.3, 4.4 Table-1 (i) (Chromium trioxide (as CrO3), percent by mass, Min)	-
Cl-4.3, 4.4 Table-1 (ii) (Matter insoluble in water, percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (iii) (Sulphates (as SO4), percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (iv) (Alkali salts (as Na2O), percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (v) (Chlorides (as Cl), percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (vi) (Nitrates (as NO2), percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (vii) (Aluminium, iron and trivalent chromium (as R2O3), percent by mass, Max)	-
Cl-4.4, Table-2 (i) (Sulphates (as SO4), percent by mass, Max)	-
Cl-4.4, Table-2 (ii) (Iron (as Fe), percent by mass, Max)	-
Cl-4.4, Table-2 (iii) (Potassium (as K), percent by mass, Max)	-
Cl-4.4, Table-2 (iv) (Sodium (as Na), percent by mass, Max)	-

-
-

1097

BIS, Western Regional Laboratory (WRL)

None

IS 7983 (1994)

Toilet cleaner, liquid - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description - IS 7983:1994)	-
4.2 (Hydrochloric Acid content -A1 of IS 7983:1994)	-
4.3 (Sediment -A2 of IS 7983:1994)	-
4.4 (Efficacy - A3 of IS 7983:1994)	-
4.5 (Effect on Porcelain Enamel -A5 of IS 7983:1994)	-
4.6 (Corrosion Inhibition -A6 of IS 7983:1994)	-

-
-

1098

BIS, Western Regional Laboratory (WRL)

None

IS 5271 (1984)

Specification for paraformaldehyde (First Revision)

5400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.2 (Particle Size)	-
2.3-Table 1-i) (Identification)	-
2.3-Table 1-ii) (Aldehydc content ( as HCHO ), percent by mass, Min)	-
2.3-Table 1-iii) (Ash, percent by mass, Max)	-
2.3-Table 1-iv) (Heavy metals, excluding iron ( as Pb ), percent by mass, Max)	-
2.3-Table 1-v) (iron content ( as Fe ), percent by mass, Max)	-
2.3-Table 1-vi) (Matter insoluble in water percent by mass, Max)	-
2.3-Table 1vii) (Moisture content ( under vacuum ), percent by mass, Max)	-
2.3-Table 1-viii) (Water soluble chlorides ( as NaCl ), percent by mass, Max)	-
2.3-Table 1-ix) (Water soluble sulphates ( as Na2 So4 ), percent by mass, Max)	-
2.3-Table 1-x) (Acidity ( as HCOOH ), percent by mass, Max OR . Alkalinity, pH, Max)	-
4.1 (Packing)	-
4.2 (Marking)	-

-
-

1099

BIS, Western Regional Laboratory (WRL)

None

IS 4265 (1975)

4,4'-Diaminostilbene-2,2'-Disulphonic Acid

4800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 2.1 (Description)	-
Clause 2.2 Table 1(i)a (As free acid ( molecular mass 370.4 ))	-
Clause 2.2 Table 1(i)b (Asdisodium salt ( molecular mass 4144 ))	-
Clause 2.2 Table 1(ii) (Insolubles in ammonia solution, percent by mass, Max)	-
Clause 2.2 Table 1(iii) (4,4’-Diaminodibenzyl-2,2’-disulphonic acid, percent by mass)	-
Clause 3.1 (Packing)	-
Clause 3.2 (Marking)	-

-
-

1100

BIS, Western Regional Laboratory (WRL)

None

IS 297 (2024)

SODIUM SULPHIDE, TECHNICAL - SPECIFICATION (Third Revision)

5,500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 ("Description ( IS 297 : 2024 )")	-
3.2 Table 1 (i) ("Total sulphides (as Na₂S) ( IS 297 : 2024 )")	-
3.2 Table 1 (ii) ("Sodium hydrosulphide (as NaHS) ( IS 297 : 2024 )")	-
3.2 Table 1 (iii) ("Excess alkali (as Na₂CO₃) ( IS 297 : 2024 )")	-
3.2 Table 1 (iv) ("Reducing compounds (other than sodium sulphide and sodium hydrosulphide)(as Na₂S₂O₃) ( IS 297 : 2024 )")	-
3.2 Table 1 (v) ("Iron and aluminum compounds (as Fe₂O₃) ( IS 297 : 2024 )")	-
3.2 Table 1 (vi) ("Sodium sulphate (as Na₂SO₄) ( IS 297 : 2024 )")	-
Cl-3.2, Table-1 (vi) (Sodium chloride (as NaCl), percent by mass, Max)	-
3.2 Table 1 (viii) ("Water insolubles (other than iron and aluminum compounds) ( IS 297 : 2024 )")	-
Cl-4.2 (Marking)	-

-
-

1101

BIS, Western Regional Laboratory (WRL)

None

IS 16232 (2014)

Iron fortified iodized salt (Double Fortified Salt) - Food grade - Specification

11800 View breakup
For complete test facility

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description - Iron fortified iodized salt (Double fortified salt) shall be crushed crystalline solid; white or pale pink or light grey in colour, free from contamination with clay and other extraneous adulterants and impurities)	-
3.2 (Salt used for manufacture of double fortified salt - Moisture- Annex A of IS 7224)	-
3.2 (Salt used for manufacture of double fortified salt - sodium chloride content on dry weight basis- A-5 of IS 253)	-
3.3 (material shall pass through 4.00 mm IS sieve)	-
3.4 - Table 1 - i (Moisture - Annex A of IS 7224)	-
3.4 - Table 1 - ii (Water insoluble matter, on dry basis - A-4 of IS 253 )	-
3.4 - Table 1 - iii (Chloride content (as NaCl), on dry basis - A-4 of IS 253)	-
3.4 - Table 1 - iv (Matter insoluble in dilute HCl, on dry basis - Annex G)	-
3.4 - Table 1 - v (Matter soluble in water other than sodium chloride, on dry basis - A-6 of IS 253)	-
3.4 - Table 1 - vi (Iron content (as Fe) - Annex A)	-
3.4 - Table 1 - vii- a (Iodine content, Manufacturer’s level - Annex B)	-
3.4 - Table 1 - vii- b (Iodine content, Distribution channel including retail level - Annex B)	-
3.4 - Table 1 - viii - a (pH of 5 percent aqueous solution : For iron fortification through encapsulated ferrous fumarate - Annex C)	-
3.4 - Table 1 - viii - b (pH of 5 percent aqueous solution : For other forms of iron fortification - Annex C)	-
3.4 - Table 1 - ix (Sulphate (as SO4) - A-8 of IS 253)	-
3.4 - Table 1 - x (Magnesium (as Mg), water soluble - A-7 of IS 253)	-
3.4 - Table 1 - xi - a (Phosphorous (as P2O5) - For iron fortification through encapsulated ferrous fumarate - Annex D)	-
3.4 - Table 1 - xi - b (Phosphorous (as P2O5) - For other forms of iron fortification - Annex D)	-
3.4 - Table 1 - xii (Sodium hexa meta phosphate, on dry basis - Annex E)	-

-
-

1102

BIS, Western Regional Laboratory (WRL)

None

IS 2124 (2023)

SODIUM BICARBONATE SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Description)	-
Cl-4.2, Table-1 (i) (Total alkalinity (as NaHCO3) percent by mass, Min)	-
Cl-4.2, Table-1 (ii) (pH (1 percent aqueous solution), Max)	-
Cl-4.2, Table-1 (iii) (Chlorides (as Cl), percent by mass, Max)	-
Cl-4.2, Table-1 (iv) (Insoluble matter, percent by mass, Max)	-
Cl-4.2, Table-1 (v) (Sulphates (as SO4) percent by mass, Max)	-
Cl-4.2, Table-1 (vi) (Iron (as Fe), percent by mass Max)	-
Cl-4.2, Table-1 (vii) (Heavy metals (as Pb), ppm, Max)	-
Cl-4.2, Table-1 (viii) (Arsenic (as As), ppm, box)	-
Cl-4.2, Table-1 (ix) (Ammonium compounds (as NH4) ppm, Max)	-
Cl-4.2, Table-1 (x) (Phosphates (as P4), percent by mass, Max)	-
Cl-4.2, Table-1 (xi) (Calcium and magnesium (as Ca), percent by mass, Max)	-
Cl-4.2, Table-1 (xii) (Copper (as Cu), ppm, Max)	-
Cl-4.2, Table-1 (xiii) (Nitrates (as NO3), percent by mass, Max)	-
Cl-4.2, Table-1 (xiv) (Silicates (as SiO2), percent by mass, Max)	-
Cl-4.2, Table-1 (xv) (Potassium (as K), percent by mass, Max)	-
Cl-4.2, Table-1 (xvi) (Substances reducing iodine percent by mass, Max)	-

-
-

1103

Pulp and Paper Research Institute (PAPRI), Rayagada

5169006

IS 4658 (2019)

Specification for coated paper and board (Art And Chromo) (Second Revision)

Specification for Coated Paper and Board (Art and Chromo)

15505 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1(General)	-	0	-
5/5.2(Tolerance on Thickness- in accordance with 7 of IS 1060 (Part 1),)	-	1110	-
5/5.3(Substance and Tolerance on Substance-in accordance with 6 of IS 1060 (Part 1).)	-	1110	-
5/5.4(Sizes and Tolerance on Sizes-in accordance with IS 1064.)	-	510	-
5/5.5-Tables 1 and 2(The coated paper and coated board)	-	11665	Table 1 (Coated Paper)
5/5.5-Tables 1 and 2(The coated paper and coated board)	-	12775	Table 2 (Coated Board)
5/5.1(General)	-	0	-
5/5.2(Tolerance on Thickness- in accordance with 7 of IS 1060 (Part 1),)	-	1110	-
5/5.3(Substance and Tolerance on Substance-in accordance with 6 of IS 1060 (Part 1).)	-	1110	-
5/5.4(Sizes and Tolerance on Sizes-in accordance with IS 1064.)	-	510	-
5/5.5-Tables 1 and 2(The coated paper and coated board)	-	11665	Table 1 (Coated Paper)
5/5.5-Tables 1 and 2(The coated paper and coated board)	-	12775	Table 2 (Coated Board)
5/5.1(General)	-	0	-
5/5.2(Tolerance on Thickness- in accordance with 7 of IS 1060 (Part 1),)	-	1110	-
5/5.3(Substance and Tolerance on Substance-in accordance with 6 of IS 1060 (Part 1).)	-	1110	-
5/5.4(Sizes and Tolerance on Sizes-in accordance with IS 1064.)	-	510	-
5/5.5-Tables 1 and 2(The coated paper and coated board)	-	11665	Table 1 (Coated Paper)
5/5.5-Tables 1 and 2(The coated paper and coated board)	-	12775	Table 2 (Coated Board)

13 Oct, 2027

-
Included w.e.f. 13.01.2025 Exclusion: "5/5.6/5.6.1 (Additional Requirements for ECO Mark-General Requirements-prescribed under clauses 5.1 to 5.5.) 5/5.6/5.6.2 (Additional Requirements for ECO Mark-Product Specific Requirements) "

1104

MALKAPUR LABORATORY (IOCL)

6196614

IS 1571 (2018)

Aviation turbine fuels, kerosine type, jet - A - 1 - Specification (Tenth Revision)

33770 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.2.2, 3.2.6, Table-1 (a)(Visual appearance)	-	200	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1 (B)(Colour)	-	200	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1 (c)(Particulate contamination, at point of 1.02) manufacture, mg/l, Max)	-	2480	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (ii) (a)(Total acidi,t y mg KOHM/ga, x)	-	1140	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (ii) (b)("Aromatics, percent by volMumaex, or Total Aromatics, percent by volume, Max")	-	2650	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (ii) (c)(Total sulphur percent by mass, Max)	-	2650	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (ii) (d)(Sulphur mercaptan, percent m/m. Max)	-	1900	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (ii) (e)(Doctor Test)	-	400	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 1)(Distillation:- Initial boiling point, °)	-	2650	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 2)(Distillation:- 10 percent recovery °Cv/,v , Max)	-	2650	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 3)(Distillation:- 50 percent recovery °C, v/v)	-	2650	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 3)(Distillation:- 50 percent recovery °C, v/v)	-	2650	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 4)(Distillation:- 90 percent recovery °C, v/v)	-	2650	Exclusive Tax
Cl-3.2.2, 3.2.6, Table- 1, (iii) (a), 5)(Distillation:- Final boiling point,°C, Max)	-	2650	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 6)(Distillation:- Residue, percent v/v, Max)	-	2650	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 7)(Distillation:- Loss, percent v/v, Max)	-	2650	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (iii) (b)(Flash point ( Abel ), °C, Min)	-	1900	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (iii) (c)(Density at 15°C,kg/m3)	-	1140	Exclusive Tax
Cl-3.2.2, 3.2.6, Table- 1, (iv) (a)(Fluidity:- Freezing point, °C, Max)	-	2270	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (iv) (b)(Fluidity:- Kinematic viscosity at minus 20°C, mm2/s, Max)	-	2270	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (v) (a)(Specific energy10) MJ/kg, Min)	-	2480	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (v) (b)(Smoke point, mm, Min or)	-	1130	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (v) (b) 2)(Naphthalenes, percent v/v, Max)	-	2650	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (vi) (a)(Copper strip corrosion for 2 h at 100°C)	-	1130	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (vi) (b)("Silver stripcorrosion12) classification, for 4 h at 50°C, Max")	-	1340	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (viii)(Contaminants: Existent gum, mg/100 ml, Max)	-	2070	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (ix) a)(Water reaction: Interface rating16), Max)	-	780	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (x)(Conductivity: Electrical conductivity, pS/m19))	-	1340	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (ii) (b)(Aromatics, percent by vol (Defense requirements))	-	2650	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (ii) (c)(Total sulphur percent by mass, Max (Defense requirements))	-	2650	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (ii) (d)(Sulphur mercaptan, percent m/m. (Defense requirements))	-	1900	Exclusive Tax
Amendment No.5 Table 3 Clause G-2.5 ii(Fluidity-Freezing point)	-	2270	Exclusive Tax
Cl-3.2.2, 3.2.6, Table-1, (vi) (b)(Silver stripcorrosion12) classification, for 4 h at 50°C, (Defense requirements))	-	1340	Exclusive Tax
Amendment No.5 Table 3 Clause G-2.5 iii(Aromatics)	-	2650	Exclusive Tax

09 Feb, 2029

-
Excluding: General-Material Cl-3.2 (Composition) Cl-3.2.1 (Antioxidants) Cl-3.2.2 (Metal Deactivator Additive (MDA)) Cl-3.2.3 (Static Dissipater Additive (SDA)) Cl-3.2.3 (Static Dissipater Additive (SDA)) Cl-3.2.4 (Lubricity Improver Additive (LIA)) Cl-3.2.5 (Fuel System Icing Inhibitor (FSII)) Cl-3.2.7 (Leak Detection Additive) Cl-5.2 (Marking) Cl-3.2.2, 3.2.6, Table-1 (d) 1) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥ 4 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 2) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥6 μm(c) Cl-3.2.2, 3.2.6, Table-1 (d) 3) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥14 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 4) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥21 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 5) (Particulate, at point of manufacture, cumulative channel particle counts:-≥25 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 6) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥30 μm©) Cl-3.2.2, 3.2.6, Table-1, (ii) (c) (Total sulphur percent by mass, Max) Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 1) ("Refining components, at the point of manufacture8) :- Non Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 2) ("Refining components, at the point of manufacture8) :- Mildly Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 3) ("Refining components, at the point of manufacture8) :- Severely Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 4) ("Refining components, at the point of manufacture8) :- Synthetic Components, percenvt/ v") Cl-3.2.2, 3.2.6, Table-1, (vii) (a) (Filter pressure differential, mm Hg, Max) Cl-3.2.2, 3.2.6, Table-1, (vii) (b) 1) (Tube rating, visual (VTR)) Cl-3.2.2, 3.2.6, Table-1, (vii) (b) 2) (ITR or ETR, average over area of 2.5 mm2 in nm) Cl-3.2.2, 3.2.6, Table-1, (ix) b), 1) ("Micro-separometer rating18) at the point of manufacture: - MSEP without SDA, Min") Cl-3.2.2, 3.2.6, Table- 1, (xi) (Lubricity: Wear scar diameter, mm, Max) Cl-3.2.2, 3.2.6, Table-1, (ix) b), 2) ("Micro-separometer rating18) at the point of manufacture: MSEP with SDA, Min") Cl-3.2.2, 3.2.6, Table-1, (ix) b), 1) ("Micro-separometer rating18) at the point of manufacture: - MSEP without SDA, Min") Cl-3.2.2, 3.2.6, Table- 1, (xi) (Lubricity: Wear scar diameter, mm, Max) Cl-3.2.2, 3.2.6, Table-1, (xii) (Identified Incidental Materials :- Fatty Acid Methyl Ester, mg/kg, Max) Cl-3.2.2, 3.2.6, Table- 1, (xi) (Lubricity: Wear scar diameter, mm (defense requirements)) Amendment No.5 Table 3 Clause G-2.5 i (Thermal stability) Amendment No.5 Table 3 Clause G-2.5 i (Tube Rating) Amendment No.5 Table 3 Clause G-2.5 i (Annex B VTR) Amendment No.5 Table 3 Clause G-2.5 i (Annex C ITR or Annex D ETR, average over an area of 2.5 mm2) Amendment No.5 Table 3 Clause G-2.5 i (Pressure differential) Amendment No.5 Table 3 Clause G-2.5 ii (Fluidity-Viscosity at - 40 ℃) Amendment No.5 Table 3 Clause G-2.5 iv (Volatility- Distillation-T50 to T10, ℃) Amendment No.5 Table 3 Clause G-2.5 iv (Volatility- Distillation-T90 to T10, ℃) Amendment No.5 Table 3 Clause G-2.5 v (Lubricity) Amendment No.5 Table 3 Clause G-2.5 vi (Unconverted fatty acid esters and fatty acids) Amendment No.5 Table 3 Clause G-2.5 i (Pressure differential) Amendment No.5 Table 3 Clause G-2.5 i (Test temperature for 2.5 h) Cl-5.2 (Marking) Cl-3.2.2, 3.2.6, Table-1 (c) (Particulate contamination, at point of 1.02) manufacture, mg/l, Max)

1105

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

Type: LMS, MMS, HMS Nominal sizes: 16,20,25,32,40,50,63 mm for both Plain & Socket ended

Please check remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 - a (Marking)	-
6.1 - b (Marking)	-
6.1 - c (Marking)	-
6.1 - d (Marking)	-
6.2 (Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-
6.3 (Standard Mark on Conduit)	-
7.1.1 Fig.7 (Maximum outside diameter of socket)	-
7.1.1 Fig.8 (Maximum inside diameter of socket)	-
7.1.1 Table-2 (Length of Socket end)	-
7.1.2 Fig.1 (Maximum outside diameter of conduit)	-
7.1.2 Fig.2 (Minimum outside diameter of conduit)	-
7.2 Fig.3 (Minimum inside diameter of conduit)	-
7.3 (Length of conduit)	-
7.4 (Unifomity of The wall Thickness)	-
8.1 (Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-
9.2 (Bending Test At Room Temp)	-
9.2 (Bending Test At Low Temp (-5 ±2°C))	-
9.3 (Compression Test at Full force applied (On load))	-
9.3 (Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-
9.4 (Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-
9.5 Fig.5 (Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-
10.0 (Resistance to Heat -Ball presure test)	-
11.0 (Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-
12 (3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-
12 (3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-
13 (Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-

-
6 x 3 mtrs

1106

ACCURATE TEST SOLUTIONS LLP

8192806

IS 10124 : Part 12 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 12 specific requirements for 22½ degree bends (Second Revision)

20 mm to 630 mm

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	8000	-
3.2.2, Table 1(Dimensions of 22 ½ deg Bends)	-	1000	-
3.2.2, Table 2(Dimensions of 22 ½ deg Bend for Elastomeric Sealing Ring Joint)	-	0	-
3.2.3(Socket, measurements)	-	1000	-

08 Dec, 2028

-
Included w.e.f 30.01.2026

1107

RTRC LIMITED, GURUGRAM

9177406

IS 9968 : Part 1 (2025)

Elastomer Insulated Cables - Specification Part 1 for Working Voltages up to and including 1100 volts (Second Revision)

Elastomer Insulated Cables — Specification Part 1 for Working Voltages up to and Including 1 100 volts

60500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Copper Conductor)	-	0	-
Cl-4.2(Aluminum Conductor)	-	0	-
Cl-6.1(Proofed Tape)	-	0	-
Cl-6.2("Polyethylene Terephthalate (PETP) Tape or Plastic Tape or Any Other Suitable Tape")	-	0	-
Cl-6.3(Glass Tape)	-	0	-
Cl-7(Fillers)	-	0	-
Cl-8.1(Textile Braid)	-	0	-
Cl-8.2(Glass Braid)	-	0	-
Cl-9.1(General Service Insulated Cables and Flexible Cords)	-	0	-
Cl-9.2(Heat Resisting Insulated Cables)	-	0	-
Cl-9.3(Silicon Rubber Insulated Cable)	-	5000	-
Cl-10.1(Preservative Compound)	-	0	-
Cl-10.2(Varnish)	-	0	-
Cl-12(separator tape)	-	0	-
Cl-14(Core Identification)	-	0	-
Cl-18(Laying UP of Cores)	-	0	-
Cl-19(Binder Tape)	-	0	-
Cl-20.2(Thickness of Sheath)	-	1000	-
Cl-20.3(Tolerance on Thickness of Sheath)	-	1000	-
Cl-20.4(Colour)	-	0	-
Cl-22.1 (i) (a)(Conductor resistance test)	-	1000	-
Cl-22.1 (i) (b)(High voltage test or spark test.)	-	2500	-
Cl-22.1 (ii) (a)(Annealing test (for copper);)	-	1000	-
Cl-22.1 (ii) (b)(Tensile Test ((for aluminium);)	-	1000	-
Cl-22.1 (ii) (c)(Wrapping test (for aluminium);)	-	1000	-
Cl-22.1 (ii) (f)(Tensile strength and elongation at break of insulation and sheath)	-	1000	-
Cl-22.1 (ii) (g)(Hot set test for insulation and sheath)	-	0	-
Cl-22.1 (ii) (h)(High voltage test)	-	1000	-
Cl-22.1 (ii) (i)(Insulation resistance test)	-	2000	-
Cl-22.1 (iii) (a)(Persulphate test (for tinned copper);)	-	1000	-
Cl-22.1 (iii) (f)(Test for thickness of insulation and sheath and overall diameter)	-	1000	-
Electrical(Tensile strength and elongation at break)	-	0	-
Cl-22.1 (iii) (g), 2(Ageing in air oven)	-	5000	-
Cl-22.1 (iii) (g), 3(Ageing in air bomb)	-	5000	-
Cl-22.1 (iii) (g), 4(Ageing In oxygen bomb)	-	6500	-
Cl-22.1 (iii) (g), 5(Hot set)	-	0	-
Cl-22.1 (iii) (g), 6(Oil resistance;)	-	4500	-
Cl-22.1 (iii) (g), 7(Tear resistance)	-	3500	-
Cl-22.1 (iii) (i)(High voltage (water immersion) test;)	-	5000	-
Cl-22.1 (iii) (j)(Flammability test)	-	3000	-
Cl-22.1 (iii) (k)(Water absorption test (for insulation as applicable))	-	8500	-
Cl-24.1(Manufacturer’s Identification)	-	0	-
Cl-25(Packing and Morning)	-	0	-
Cl-4.1(Copper Conductor)	-	0	-
Cl-4.2(Aluminum Conductor)	-	0	-
Cl-6.1(Proofed Tape)	-	0	-
Cl-6.2("Polyethylene Terephthalate (PETP) Tape or Plastic Tape or Any Other Suitable Tape")	-	0	-
Cl-6.3(Glass Tape)	-	0	-
Cl-7(Fillers)	-	0	-
Cl-8.1(Textile Braid)	-	0	-
Cl-8.2(Glass Braid)	-	0	-
Cl-9.1(General Service Insulated Cables and Flexible Cords)	-	0	-
Cl-9.2(Heat Resisting Insulated Cables)	-	0	-
Cl-9.3(Silicon Rubber Insulated Cable)	-	0	-
Cl-10.1(Preservative Compound)	-	0	-
Cl-10.2(Varnish)	-	0	-
Cl-12(separator tape)	-	0	-
Cl-14(Core Identification)	-	0	-
Cl-18(Laying UP of Cores)	-	0	-
Cl-19(Binder Tape)	-	0	-
Cl-20.2(Thickness of Sheath)	-	0	-
Cl-20.3(Tolerance on Thickness of Sheath)	-	0	-
Cl-20.4(Colour)	-	0	-
Cl-22.1 (i) (a)(Conductor resistance test)	-	0	-
Cl-22.1 (i) (b)(High voltage test or spark test.)	-	0	-
Cl-22.1 (ii) (a)(Annealing test (for copper);)	-	0	-
Cl-22.1 (ii) (b)(Tensile Test ((for aluminium);)	-	0	-
Cl-22.1 (ii) (c)(Wrapping test (for aluminium);)	-	0	-
Cl-22.1 (ii) (f)(Tensile strength and elongation at break of insulation and sheath)	-	0	-
Cl-22.1 (ii) (g)(Hot set test for insulation and sheath)	-	0	-
Cl-22.1 (ii) (h)(High voltage test)	-	0	-
Cl-22.1 (ii) (i)(Insulation resistance test)	-	0	-
Cl-22.1 (iii) (a)(Persulphate test (for tinned copper);)	-	0	-
Cl-22.1 (iii) (f)(Test for thickness of insulation and sheath and overall diameter)	-	0	-
Electrical(Tensile strength and elongation at break)	-	0	-
Cl-22.1 (iii) (g), 2(Ageing in air oven)	-	0	-
Cl-22.1 (iii) (g), 3(Ageing in air bomb)	-	0	-
Cl-22.1 (iii) (g), 4(Ageing In oxygen bomb)	-	0	-
Cl-22.1 (iii) (g), 5(Hot set)	-	0	-
Cl-22.1 (iii) (g), 6(Oil resistance;)	-	0	-
Cl-22.1 (iii) (g), 7(Tear resistance)	-	0	-
Cl-22.1 (iii) (i)(High voltage (water immersion) test;)	-	0	-
Cl-22.1 (iii) (j)(Flammability test)	-	0	-
Cl-22.1 (iii) (k)(Water absorption test (for insulation as applicable))	-	0	-
Cl-24.1(Manufacturer’s Identification)	-	0	-
Cl-25(Packing and Morning)	-	0	-

03 Apr, 2027

-
Included w.e.f. 30.01.2026

1108

ACCURATE TEST SOLUTIONS LLP

8192806

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

20 mm to 630 mm

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	8000	-
3.2.2, Table 1(Dimensions of 30 deg Bends)	-	2000	-
3.2.2, Table 2(Dimensions of 30 deg Bend for Elastomeric Sealing Ring Joint)	-	0	-

08 Dec, 2028

-
Included w.e.f 30.01.2026

1109

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 14933 (2001)

High Pressure Fire Fighting Hose -Specification

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Type)	-	500	-
Cl 3.2 & 3.3(Nom ID)	-	500	-
Cl 3.4(Internal Dia)	-	500	-
Cl 4(Length)	-	500	-
Cl 5(Mass)	-	500	-
Cl 6(Coil Dia)	-	500	-
Cl 7(Reinforcement)	-	500	-
Cl 8(Lining)	-	500	-
Cl 9(Cover)	-	500	-
Cl 10(Hydaulic Proof Pressure Test)	-	2500	-
Cl 11(Hydraulic Burst Pressure Test)	-	4000	-
Cl 12(Kink test)	-	2500	-
Cl 13 & Annex A(Adhesion Test)	-	2000	-
Cl 14 & Annex B(Abrasion Resistance Test)	-	3000	-
Cl 15(Accelerated Ageing Test)	-	5000	-
Cl 16(Change in Length)	-	2000	-
Cl 17.1 & Annex C(Ozone Resistance Test)	-	20000	-
Cl 17.2(Oil Resistance Test)	-	3500	-
Cl 17.3(Heat Resistance Test)	-	1500	-
Cl 17.3(Heat Resistance Test)	-	1500	-
Cl 17.2(Oil Resistance Test)	-	3500	-
Cl 17.1 & Annex C(Ozone Resistance Test)	-	20000	Lining - Rs. 12,500/- & Cover - Rs. 12500/-
Cl 16(Change in Length)	-	2000	-
Cl 15(Accelerated Ageing Test)	-	5000	-
Cl 14 & Annex B(Abrasion Resistance Test)	-	3000	-
Cl 13 & Annex A(Adhesion Test)	-	2000	-
Cl 12(Kink test)	-	2500	-
Cl 11(Hydraulic Burst Pressure Test)	-	4000	-
Cl 10(Hydaulic Proof Pressure Test)	-	2500	-
Cl 9(Cover)	-	500	-
Cl 8(Lining)	-	500	-
Cl 7(Reinforcement)	-	500	-
Cl 6(Coil Dia)	-	500	-
Cl 5(Mass)	-	500	-
Cl 4(Length)	-	500	-
Cl 3.4(Internal Dia)	-	500	-
Cl 3.2 & 3.3(Nom ID)	-	500	-
Cl 3.1(Type)	-	500	-
Cl 17.3(Heat Resistance Test)	-	0	-
Cl 17.2(Oil Resistance Test)	-	0	-
Cl 17.1 & Annex C(Ozone Resistance Test)	-	0	-
Cl 16(Change in Length)	-	0	-
Cl 15(Accelerated Ageing Test)	-	0	-
Cl 14 & Annex B(Abrasion Resistance Test)	-	0	-
Cl 13 & Annex A(Adhesion Test)	-	0	-
Cl 12(Kink test)	-	0	-
Cl 11(Hydraulic Burst Pressure Test)	-	0	-
Cl 10(Hydaulic Proof Pressure Test)	-	0	-
Cl 9(Cover)	-	0	-
Cl 8(Lining)	-	0	-
Cl 7(Reinforcement)	-	0	-
Cl 6(Coil Dia)	-	0	-
Cl 5(Mass)	-	0	-
Cl 4(Length)	-	0	-
Cl 3.4(Internal Dia)	-	0	-
Cl 3.2 & 3.3(Nom ID)	-	0	-
Cl 3.1(Type)	-	0	-
Cl 3.1(Type)	-	0	-
Cl 3.2 & 3.3(Nom ID)	-	0	-
Cl 3.4(Internal Dia)	-	0	-
Cl 4(Length)	-	0	-
Cl 5(Mass)	-	0	-
Cl 6(Coil Dia)	-	0	-
Cl 7(Reinforcement)	-	0	-
Cl 8(Lining)	-	0	-
Cl 9(Cover)	-	0	-
Cl 10(Hydaulic Proof Pressure Test)	-	0	-
Cl 11(Hydraulic Burst Pressure Test)	-	0	-
Cl 12(Kink test)	-	0	-
Cl 13 & Annex A(Adhesion Test)	-	0	-
Cl 14 & Annex B(Abrasion Resistance Test)	-	0	-
Cl 15(Accelerated Ageing Test)	-	0	-
Cl 16(Change in Length)	-	0	-
Cl 17.1 & Annex C(Ozone Resistance Test)	-	0	-
Cl 17.2(Oil Resistance Test)	-	0	-
Cl 17.3(Heat Resistance Test)	-	0	-
Cl 17.3(Heat Resistance Test)	-	0	-
Cl 17.2(Oil Resistance Test)	-	0	-
Cl 17.1 & Annex C(Ozone Resistance Test)	-	0	-
Cl 16(Change in Length)	-	0	-
Cl 15(Accelerated Ageing Test)	-	0	-
Cl 14 & Annex B(Abrasion Resistance Test)	-	0	-
Cl 13 & Annex A(Adhesion Test)	-	0	-
Cl 12(Kink test)	-	0	-
Cl 11(Hydraulic Burst Pressure Test)	-	0	-
Cl 10(Hydaulic Proof Pressure Test)	-	0	-
Cl 9(Cover)	-	0	-
Cl 8(Lining)	-	0	-
Cl 7(Reinforcement)	-	0	-
Cl 6(Coil Dia)	-	0	-
Cl 5(Mass)	-	0	-
Cl 4(Length)	-	0	-
Cl 3.4(Internal Dia)	-	0	-
Cl 3.2 & 3.3(Nom ID)	-	0	-
Cl 3.1(Type)	-	0	-
Cl 17.3(Heat Resistance Test)	-	0	-
Cl 17.2(Oil Resistance Test)	-	0	-
Cl 17.1 & Annex C(Ozone Resistance Test)	-	0	-
Cl 16(Change in Length)	-	0	-
Cl 15(Accelerated Ageing Test)	-	0	-
Cl 14 & Annex B(Abrasion Resistance Test)	-	0	-
Cl 13 & Annex A(Adhesion Test)	-	0	-
Cl 12(Kink test)	-	0	-
Cl 11(Hydraulic Burst Pressure Test)	-	0	-
Cl 10(Hydaulic Proof Pressure Test)	-	0	-
Cl 9(Cover)	-	0	-
Cl 8(Lining)	-	0	-
Cl 7(Reinforcement)	-	0	-
Cl 6(Coil Dia)	-	0	-
Cl 5(Mass)	-	0	-
Cl 4(Length)	-	0	-
Cl 3.4(Internal Dia)	-	0	-
Cl 3.2 & 3.3(Nom ID)	-	0	-
Cl 3.1(Type)	-	0	-

-
Included w.e.f. 13.01.2025

1110

ACCURATE TEST SOLUTIONS LLP

8192806

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

20 MM TO 630 MM

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	7000	-
3.2, 3.2.1, Fig 2(Manufacture)	-	1000	-
3.2.2, Fig 1, table 1(Dimensions)	-	1000	-
3.2.3(the socket measurement shall comply with IS 10124 (Part 1).)	-	1000	-
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of 45o Bend)	-	0	-
Table 2 (Clause 3.2.2, and Fig. 2)(Dimensions of 45° Bend for Elastomeric Sealing Ring Joint)	-	0	-

08 Dec, 2028

-
Included w.e.f 30.01.2026

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number