BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11248 Results

S.No.

Lab Name

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

1141

PIBCO LIMITED R&D CENTRE

IS 15909 (2020)

PVC Geomembranes for Lining - Specification ( Second Revision )

category B Only

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	0	-
5,Table 1(Requirements)	-	0	-
5,Table 1(Length )	-	0	-
5,Table 1(Width )	-	0	-
5,Table 1(Thickness)	-	0	-
5,Table 1(Specific Gravity)	-	0	-
5,Table 1( Tensile strength (Longitudinal) ,kg/m2)	-	0	-
5,Table 1(Elongation at break (Longitudinal),250 % ,Min)	-	0	-
5,Table 1( Tensile strength (Transverse) ,kg/m2)	-	0	-
5,Table 1(Elongation at break (Transverse),250 % ,Min)	-	0	-
5,Table 1(Tear resistance (machine direction))	-	0	-
5,Table 1(Tear resistance (Cross direction))	-	0	-
5,Table 1(Index puncture resistance,N)	-	0	-
5,Table 1(Low temperature crack resistance)	-	0	-
5,Table 1(Hydrostatic resistance,kg/cm2,Min)	-	0	-
5,Table 1(Seam strength,kg,Min)	-	0	-
5,Table 1(Volatile Loss ,% ,Max)	-	0	-
5,Table 1(Peel strength,kN/m,Min)	-	0	-
5,Table 1(Resistance to soil burial)	-	0	-
5,Table 1(Tensile strength (Longitudinal),% change)	-	0	-
5,Table 1(Elongation at break (Longitudinal),% change)	-	0	-
5,Table 1(Tensile strength (Transverse),% change)	-	0	-
5,Table 1(Elongation at break (Transverse),% change)	-	0	-
5,Table 1(Water extraction,% loss in weight)	-	0	-
5,Table 1(Stability to ultraviolet radiations,% retension in Tensile strength)	-	0	-
5,Table 1(Stability to ultraviolet radiations,% retension in Elongation at break)	-	0	-
6.0(Dimensions and tolerances)	-	2000	-
5, Table-2(Length)	-	500	-
5, Table-2(Width)	-	500	-
5, Table-2(Thickness at 20kPa pressure)	-	1000	-
5, Table-2(Tensile Strength (Longitudinal))	-	1500	-
5, Table-2(Tensile Strength (Transverse))	-	1500	-
5, Table-2(Elongation at break (Longitudinal))	-	1500	-
5, Table-2(Elongation at break (Transverse))	-	1500	-
5, Table-2(Tear Strength (Machine direction))	-	1500	-
5, Table-2(Tear Strength (Cross direction))	-	1500	-
5, Table-2(Behaviour during perforation)	-	3000	-
5, Table-2(Height of fall without perforation)	-	3000	-
5, Table-2(Cold crack resistance at low temperature)	-	3000	-
5, Table-2(Hydrostatic Pressure Resistance)	-	5000	-
5, Table-2(Dimensional Stability at 80 degree C)	-	3000	-
5, Table-2(Change in length after heating)	-	1500	-
5, Table-2(Change in width after heating)	-	1500	-
5, Table-2(Resistance to acid and alkali)	-	20000	-
5, Table-2(Strength of welded seam shear resistance)	-	3000	-
5, Table-2(Resistance to static puncturing)	-	5000	-
5, Table-2(Horizontal rate of burning)	-	12500	-
5, Table-2(Vertical rate of burning)	-	12500	-
7.0(Colour ,Surface characteristics and fredom from defects)	-	500	-
7.1(Colour ,Surface characteristics and fredom from defects)	-	500	-
7.2(Colour ,Surface characteristics and fredom from defects)	-	500	-
5,Table 2(Specific Gravity)	-	1000	-

Complete

23 Mar, 2028

-
Exclusion: Cl 5,Table 1

1142

URS PRODUCTS AND TESTING PVT. LTD.

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

Personal Protective Equipment Part 2 Safety Footwear

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	100	-
Cl 5.2.2, Table 4(" Height of upper ")	-	150	-
Cl 5.2.3(Heel area)	-	100	-
Cl 5.3.1.1(Construction of whole footwear)	-	100	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	600	-
Cl 5.3.2.1(Toe protection - general)	-	100	-
Cl 5.3.2.2(Internal length)	-	250	-
Cl 5.3.2.3(Width of toecap flange)	-	100	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	600	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	600	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	600	-
Cl 5.3.2.6(Impact resistance)	-	1000	-
Cl 5.3.2.7(Compression resistance)	-	1000	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	1000	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	2500	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2500	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2500	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1800	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1500	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1500	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	2500	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	350	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	2500	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3500	-
Cl 5.3.7(Seam strength)	-	600	-
Cl 5.3.8(Lead Content ( National Annex A))	-	600	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	600	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	600	-
Cl 5.4.2(Thickness)	-	600	-
Cl 5.4.3(Tear strength)	-	600	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	600	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	600	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	600	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	600	-
Cl 5.4.5(Flexing resistance)	-	600	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	600	-
Cl 5.4.7(Resistance to hydrolysis)	-	1200	-
Cl 5.5.2(Lining- Tear strength)	-	600	-
Cl 5.5.3(Lining- Abrasion resistance)	-	800	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	800	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	600	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	600	-
Cl 5.7.2(Water permeability of insock)	-	800	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	800	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	800	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	800	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	500	-
Cl 5.8.2.2(Cleated area)	-	500	-
Cl 5.8.2.3(Cleat height)	-	500	-
Cl 5.8.3(Outsole- Tear strength)	-	600	-
Cl 5.8.5(Outsole-Flexing resistance)	-	600	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	2500	-
Cl 5.8.7(Interlayer bond strength)	-	600	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	600	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	600	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	600	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	500	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	500	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	600	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	500	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	500	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1500	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	2500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	2500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	1000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	500	-
Cl 6.2.8.3(Resistance to cutting)	-	1000	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	800	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	500	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	500	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	500	-
Cl 7, Table 20("Marking ")	-	100	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	800	-
Cl 5.2(Design)	-	0	-
Cl 5.2.2, Table 4(" Height of upper ")	-	0	-
Cl 5.2.3(Heel area)	-	0	-
Cl 5.3.1.1(Construction of whole footwear)	-	0	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	0	-
Cl 5.3.2.1(Toe protection - general)	-	0	-
Cl 5.3.2.2(Internal length)	-	0	-
Cl 5.3.2.3(Width of toecap flange)	-	0	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	0	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	0	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	0	-
Cl 5.3.2.6(Impact resistance)	-	0	-
Cl 5.3.2.7(Compression resistance)	-	0	-
Cl 5.3.3(Leak proofness)	-	0	-
Cl 5.3.4("Specific ergonomic features ")	-	0	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	0	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	0	-
Cl 5.3.7(Seam strength)	-	0	-
Cl 5.3.8(Lead Content ( National Annex A))	-	0	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	0	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	0	-
Cl 5.4.2(Thickness)	-	0	-
Cl 5.4.3(Tear strength)	-	0	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	0	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	0	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	0	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	0	-
Cl 5.4.5(Flexing resistance)	-	0	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	0	-
Cl 5.4.7(Resistance to hydrolysis)	-	0	-
Cl 5.5.2(Lining- Tear strength)	-	0	-
Cl 5.5.3(Lining- Abrasion resistance)	-	0	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	0	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	0	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	0	-
Cl 5.7.2(Water permeability of insock)	-	0	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	0	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	0	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	0	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	0	-
Cl 5.8.2.2(Cleated area)	-	0	-
Cl 5.8.2.3(Cleat height)	-	0	-
Cl 5.8.3(Outsole- Tear strength)	-	0	-
Cl 5.8.5(Outsole-Flexing resistance)	-	0	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	0	-
Cl 5.8.7(Interlayer bond strength)	-	0	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	0	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	0	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	0	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	0	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	0	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	0	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	0	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	0	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	0	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	0	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	0	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	0	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	0	-
Cl 6.2.4(Energy absorption of seat region)	-	0	-
Cl 6.2.5(Water resistance)	-	0	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	0	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	0	-
Cl 6.2.8.3(Resistance to cutting)	-	0	-
Cl 6.2.9(Scuff cap)	-	0	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	0	-
Cl 6.3(Upper — Water penetration and absorption)	-	0	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	0	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	0	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	0	-
Cl 6.4.3.2(Design of Ladder grip)	-	0	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	0	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	0	-
Cl 7, Table 20("Marking ")	-	0	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	0	-

Complete

26 Sep, 2027

-
Included w.e.f. 17.02.2025 Exclusion: Cl 6.2.6.2 ("Metatarsal protection-Impact resistance of metatarsal protective device "), Cl 6.2.7 (Ankle protection), Cl 6.2.6.1 (Metatarsal protection - Construction)

1143

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

Rated Voltage Being Not more then 250 V for single - phase appliances and 480 V for Other Appliances Including Direct Current (DC) Supplied appliances and Battery Operated appliances

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	20% Discount to BIS
8.1.1(Protection against live parts in all positions)	-	1000	20% Discount to BIS
8.1.2(Protection against live parts in openings)	-	1000	20% Discount to BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	20% Discount to BIS
8.1.4(Protection against live parts against protective impedance)	-	1000	20% Discount to BIS
9(Starting of motor operation test requirements and tests)	-	1000	20% Discount to BIS
10.1(Power input)	-	1000	20% Discount to BIS
10.2(Current input)	-	1000	20% Discount to BIS
11.1(General)	-	500	20% Discount to BIS
11.2(General)	-	500	20% Discount to BIS
11.3(Heating)	-	1000	20% Discount to BIS
13.1(General)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	20% Discount to BIS
13.3(Electric Strength at operating temperature)	-	1000	20% Discount to BIS
14(Transient Over Voltages)	-	1000	20% Discount to BIS
15.0(General)	-	1000	20% Discount to BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	20% Discount to BIS
15.2(Spillage Test)	-	1000	20% Discount to BIS
15.3(Humidity Test)	-	1000	20% Discount to BIS
16.0(General)	-	500	20% Discount to BIS
16.1(General)	-	500	20% Discount to BIS
16.2(Leakage Current (after Clause 15))	-	1000	20% Discount to BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	20% Discount to BIS
17(Over Load Protection of Transformers and associated circuits)	-	1000	20% Discount to BIS
18(Endurance Test requirements and tests)	-	500	20% Discount to BIS
19(Abnormal Operation)	-	1000	20% Discount to BIS
20(Stability test)	-	1000	20% Discount to BIS
21(Mechanical Strength Test)	-	1000	20% Discount to BIS
22(Construction verification related test)	-	1000	20% Discount to BIS
23(General)	-	1000	20% Discount to BIS
24(Components)	-	1000	20% Discount to BIS
25(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
26(Terminals for external conductors)	-	1000	20% Discount to BIS
27(Provision for earthing)	-	1000	20% Discount to BIS
29(clearance, creepage distances and solid insulation)	-	1000	20% Discount to BIS
30.1(Ball pressure test)	-	1000	20% Discount to BIS
30.2(Glow Wire Test)	-	1000	20% Discount to BIS
30.2(Needle Flame Test)	-	1000	20% Discount to BIS
31(Resistance to Rusting)	-	1000	20% Discount to BIS
32(Radiation Toxicity and Similar Hazards)	-	1000	20% Discount to BIS
4(General requirement)	-	500	20% Discount to BIS
16(Leakage current and electric strength)	-	1000	20% Discount to BIS
17(Overload protection of transformers and associated circuits)	-	1000	20% Discount to BIS
18(Endurance)	-	500	20% Discount to BIS
8.1.5(Live parts of built-in appliances)	-	1000	20% Discount to BIS
11.4(Heating appliances)	-	900	20% Discount to BIS
11.5(Motor-operated appliances)	-	1200	20% Discount to BIS
11.6(Combined appliances)	-	1000	20% Discount to BIS
11.7(Duration corresponding)	-	1000	20% Discount to BIS
11.8(Temperature rise)	-	1000	20% Discount to BIS
4(General Requirement)	-	500	20% Discount to BIS
5(General conditions for tests)	-	500	20% Discount to BIS
6(Classifications)	-	500	20% Discount to BIS
28(Screw test and connections)	-	1000	20% Discount to BIS
7(Marking and instructions)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	0	-
10.2(Current input)	-	0	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	0	-
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
14(Transient Over Voltages)	-	0	-
15.0(General)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.2(Spillage Test)	-	0	-
15.3(Humidity Test)	-	0	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
18(Endurance Test requirements and tests)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability test)	-	0	-
21(Mechanical Strength Test)	-	0	-
22(Construction verification related test)	-	0	-
23(General)	-	0	-
24(Components)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
30.1(Ball pressure test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.2(Needle Flame Test)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classifications)	-	0	-
28(Screw test and connections)	-	0	-

Complete

11 Apr, 2028

-
Included.w.e.f.24.01.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 (EMC/EMI)

1144

Aaditech Test and Calibration Lab LLP

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

ELECTRICAL

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	100	-
7(Marking and instructions)	-	100	-
8(Protection against live parts)	-	100	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	100	-
10(POWER INPUT AND CURRENT)	-	100	-
11(HEATING)	-	100	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	100	-
14(TRANSIENT OVERVOLTAGES)	-	100	-
15(MOISTURE RESISTANCE)	-	100	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	100	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	100	-
18(ENDURANCE)	-	100	-
19(ABNORMAL OPERATION)	-	100	-
20(STABILITY AND MECHANICAL HAZARDS)	-	100	-
21(MECHANICAL STRENGTH)	-	100	-
22(CONSTRUCTION)	-	100	-
23(INTERNAL WIRING)	-	100	-
24(COMPONENTS)	-	100	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	100	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	100	-
27(PROVISION FOR EARTHING)	-	100	-
28(SCREWS AND CONNECTIONS)	-	100	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	100	-
30(RESISTANCE TO HEAT AND FIRE)	-	100	-
31(RESISTANCE TO RUSTING)	-	100	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	100	-
22.16(Automatic cord reel)	-	100	-
22.32(Oxygen bomb for rubber material)	-	100	-
22.47(Water pressure inlet)	-	100	-
22.106(Interlocks)	-	100	-
22.3(Flexing test)	-	100	-
24(Components)	-	100	-
Annex BB(Appliance for board ships)	-	100	-
19.11.4.1(Electrostatic discharges)	-	100	-
19.11.4.2(Radiated fields)	-	100	-
19.11.4.3(Fast transient bursts)	-	100	-
19.11.4.4(Surge immunity test)	-	100	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	100	-
19.11.4.7(Harmonics)	-	100	-
4(General requirements)	-	100	-
5(General Conditions of tests)	-	100	-
19.11.4.5(Immunity to conducted discharges)	-	100	-
6(Classification- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-2-15)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.5(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.7(Marking- IS 302-1)	-	100	-
7.8(Marking- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
Marking- IS 302-1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-2-15)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.5(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.7(Marking- IS 302-1)	-	100	-
7.8(Marking- IS 302-1)	-	100	-
7.9(Marking- IS 302-1)	-	100	-
7.1O(Marking- IS 302-1)	-	100	-
7.11(Marking- IS 302-1)	-	100	-
7.12(Marking- IS 302-2-15)	-	100	-
7.12(Marking- IS 302-1)	-	100	-
7.12.1(Marking- IS 302-1)	-	100	-
7.12.3(Marking- IS 302-1)	-	100	-
7.12.5(Marking- IS 302-1)	-	100	-
7.12.6(Marking- IS 302-1)	-	100	-
7.13(Marking- IS 302-1)	-	100	-
7.14(Marking- IS 302-1)	-	100	-
7.15(Marking- IS 302-1)	-	100	-
7.101(Marking- IS 302-2-15)	-	100	-
8(Protection Against Electric Shock, IS 302-1)	-	100	-
10(Power Input and Current, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	100	-
15.1(Moisture Resistance, IS 302-1)	-	100	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	100	-
16(Leakage current as per Cl 16, IS 302-1)	-	100	-
16(electric strength as per Cl 16, IS 302-1)	-	100	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	100	-
21.1(Mechanical Strength, IS 302-1)	-	100	-
21.2(Mechanical Strength, IS 302-1)	-	100	-
22.1(Construction, IS 302-1)	-	100	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	100	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	100	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	100	-
23.2(Internal Wiring, IS 302-1)	-	100	-
23.4(Internal Wiring, IS 302-1)	-	100	-
23.5(Internal Wiring, IS 302-1)	-	100	-
23.6(Internal Wiring, IS 302-1)	-	100	-
23.7(Internal Wiring, IS 302-1)	-	100	-
23.8(Internal Wiring, IS 302-1)	-	100	-
23.9(Internal Wiring, IS 302-1)	-	100	-
23.1O(Internal Wiring, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	100	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28(Screws & Connections, IS 302-1)	-	100	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	100	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	100	-
31(Resistance of Rusting, IS 302-1)	-	100	-
6.0(Classification)	-	100	-
7(Marking and instructions)	-	100	-
8(Protection against live parts)	-	100	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	100	-
10(POWER INPUT AND CURRENT)	-	100	-
11(HEATING)	-	100	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	100	-
14(TRANSIENT OVERVOLTAGES)	-	100	-
15(MOISTURE RESISTANCE)	-	100	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	100	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	100	-
18(ENDURANCE)	-	100	-
19(ABNORMAL OPERATION)	-	100	-
20(STABILITY AND MECHANICAL HAZARDS)	-	100	-
21(MECHANICAL STRENGTH)	-	100	-
22(CONSTRUCTION)	-	100	-
23(INTERNAL WIRING)	-	100	-
24(COMPONENTS)	-	100	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	100	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	100	-
27(PROVISION FOR EARTHING)	-	100	-
28(SCREWS AND CONNECTIONS)	-	100	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	100	-
30(RESISTANCE TO HEAT AND FIRE)	-	100	-
31(RESISTANCE TO RUSTING)	-	100	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	100	-
22.16(Automatic cord reel)	-	100	-
22.32(Oxygen bomb for rubber material)	-	100	-
22.47(Water pressure inlet)	-	100	-
22.106(Interlocks)	-	100	-
22.3(Flexing test)	-	100	-
24(Components)	-	100	-
Annex BB(Appliance for board ships)	-	100	-
19.11.4.1(Electrostatic discharges)	-	100	-
19.11.4.2(Radiated fields)	-	100	-
19.11.4.3(Fast transient bursts)	-	100	-
19.11.4.4(Surge immunity test)	-	100	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	100	-
19.11.4.7(Harmonics)	-	100	-
4(General requirements)	-	100	-
5(General Conditions of tests)	-	100	-
19.11.4.5(Immunity to conducted discharges)	-	100	-
6(Classification- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-2-15)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.5(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.7(Marking- IS 302-1)	-	100	-
7.8(Marking- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
Marking- IS 302-1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-2-15)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.5(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.7(Marking- IS 302-1)	-	100	-
7.8(Marking- IS 302-1)	-	100	-
7.9(Marking- IS 302-1)	-	100	-
7.1O(Marking- IS 302-1)	-	100	-
7.11(Marking- IS 302-1)	-	100	-
7.12(Marking- IS 302-2-15)	-	100	-
7.12(Marking- IS 302-1)	-	100	-
7.12.1(Marking- IS 302-1)	-	100	-
7.12.3(Marking- IS 302-1)	-	100	-
7.12.5(Marking- IS 302-1)	-	100	-
7.12.6(Marking- IS 302-1)	-	100	-
7.13(Marking- IS 302-1)	-	100	-
7.14(Marking- IS 302-1)	-	100	-
7.15(Marking- IS 302-1)	-	100	-
7.101(Marking- IS 302-2-15)	-	100	-
8(Protection Against Electric Shock, IS 302-1)	-	100	-
10(Power Input and Current, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	100	-
15.1(Moisture Resistance, IS 302-1)	-	100	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	100	-
16(Leakage current as per Cl 16, IS 302-1)	-	100	-
16(electric strength as per Cl 16, IS 302-1)	-	100	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	100	-
21.1(Mechanical Strength, IS 302-1)	-	100	-
21.2(Mechanical Strength, IS 302-1)	-	100	-
22.1(Construction, IS 302-1)	-	100	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	100	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	100	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	100	-
23.2(Internal Wiring, IS 302-1)	-	100	-
23.4(Internal Wiring, IS 302-1)	-	100	-
23.5(Internal Wiring, IS 302-1)	-	100	-
23.6(Internal Wiring, IS 302-1)	-	100	-
23.7(Internal Wiring, IS 302-1)	-	100	-
23.8(Internal Wiring, IS 302-1)	-	100	-
23.9(Internal Wiring, IS 302-1)	-	100	-
23.1O(Internal Wiring, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	100	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28(Screws & Connections, IS 302-1)	-	100	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	100	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	100	-
31(Resistance of Rusting, IS 302-1)	-	100	-

Complete

03 Sep, 2024

28 Aug, 2027

-
Included w.e.f 03.02.2025 Exclusion: Cl. 19.11.4.1 to 19.11.4.7 (EMI/EMC tests)

1145

DELHI TEST HOUSE KUNDLI

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	2000	-
6(Classification)	-	100	-
5(General conditions for the tests)	-	100	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	100	-
11.6(Combined appliances)	-	100	-
11.5(Motor-operated appliances)	-	100	-
11.4(Heating appliances)	-	100	-
8.1.5(Live parts of built-in appliances)	-	200	-
18(Endurance)	-	100	-
17(Overload protection of transformers and associated circuits)	-	600	-
16(Leakage current and electric strength)	-	500	-
4(General requirement)	-	100	-
32(Radiation Toxicity and Similar Hazards)	-	400	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	500	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27(Provision for earthing)	-	500	-
26(Terminals for external conductors)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
24(Components)	-	100	-
23(Internal wiring)	-	400	-
22(Construction)	-	500	-
21(Mechanical Strength)	-	100	-
20(Stability and mechanical hazards)	-	100	-
19(Abnormal Operation)	-	2000	-
18(Endurance)	-	100	-
17(Over Load Protection of Transformers and associated circuits)	-	600	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	100	-
16.0(General)	-	100	-
15.3(Humidity Test)	-	2000	-
15.2(Spillage Test)	-	300	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.0(Moisture resistance)	-	100	-
14(Transient Over Voltages)	-	400	-
13.3(Electric Strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
11.3(Heating)	-	500	-
11.2(General)	-	100	-
11.1(General)	-	100	-
10.2(Current input)	-	100	-
10.1(Power input)	-	100	-
9(Starting of motor operation test requirements and tests)	-	100	-
8.1.4(Protection against live parts against protective impedance)	-	100	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	100	-
8.1.2(Protection against live parts in openings)	-	100	-
8.1.1(Protection against live parts in all positions)	-	100	-
7(Marking and instructions)	-	100	-
A.2(Earth continuity test)	-	100	-
Annex C(Ageing test on motors)	-	100	-
Annex D(Thermal motor protectors)	-	100	-
15.2(Moisture resistance)	-	100	-
19.17(Abnormal operation)	-	100	-
20.1(Stability and mechanical hazards)	-	100	-
21.2(Mechanical strength)	-	100	-
21.3(Mechanical strength)	-	100	-
22.5(Construction)	-	100	-
22.6(Construction)	-	100	-
22.11(Construction)	-	100	-
22.16(Construction)	-	100	-
22.32(Construction)	-	100	-
22.42(Construction)	-	100	-
23.3(Internal wiring)	-	100	-
25(Supply connection and external flexible cords)	-	100	-
25.7(Supply connection and external flexible cords)	-	100	-
25.14(Supply connection and external flexible cords)	-	100	-
25.15(Supply connection and external flexible cords)	-	100	-
26.5(Terminals for external conductors)	-	100	-
27.5(Provision for earthing)	-	100	-
28.1(Screws and connections)	-	100	-
B.22.1(Construction)	-	100	-
B.22.3(Construction)	-	100	-
B.22.4(Construction)	-	100	-
B.22.5(Construction)	-	100	-
12(Charging of metal-ion batteries)	-	2000	-
6(Classification)	-	100	-
5(General conditions for the tests)	-	100	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	100	-
11.6(Combined appliances)	-	100	-
11.5(Motor-operated appliances)	-	100	-
11.4(Heating appliances)	-	100	-
8.1.5(Live parts of built-in appliances)	-	200	-
18(Endurance)	-	100	-
17(Overload protection of transformers and associated circuits)	-	600	-
16(Leakage current and electric strength)	-	500	-
4(General requirement)	-	100	-
32(Radiation Toxicity and Similar Hazards)	-	400	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	500	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27(Provision for earthing)	-	500	-
26(Terminals for external conductors)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
24(Components)	-	100	-
23(Internal wiring)	-	400	-
22(Construction)	-	500	-
21(Mechanical Strength)	-	100	-
20(Stability and mechanical hazards)	-	100	-
19(Abnormal Operation)	-	2000	-
18(Endurance)	-	100	-
17(Over Load Protection of Transformers and associated circuits)	-	600	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	100	-
16.0(General)	-	100	-
15.3(Humidity Test)	-	2000	-
15.2(Spillage Test)	-	300	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.0(Moisture resistance)	-	100	-
14(Transient Over Voltages)	-	400	-
13.3(Electric Strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
11.3(Heating)	-	500	-
11.2(General)	-	100	-
11.1(General)	-	100	-
10.2(Current input)	-	100	-
10.1(Power input)	-	100	-
9(Starting of motor operation test requirements and tests)	-	100	-
8.1.4(Protection against live parts against protective impedance)	-	100	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	100	-
8.1.2(Protection against live parts in openings)	-	100	-
8.1.1(Protection against live parts in all positions)	-	100	-
7(Marking and instructions)	-	100	-
A.2(Earth continuity test)	-	100	-
Annex C(Ageing test on motors)	-	100	-
Annex D(Thermal motor protectors)	-	100	-
15.2(Moisture resistance)	-	100	-
19.17(Abnormal operation)	-	100	-
20.1(Stability and mechanical hazards)	-	100	-
21.2(Mechanical strength)	-	100	-
21.3(Mechanical strength)	-	100	-
22.5(Construction)	-	100	-
22.6(Construction)	-	100	-
22.11(Construction)	-	100	-
22.16(Construction)	-	100	-
22.32(Construction)	-	100	-
22.42(Construction)	-	100	-
23.3(Internal wiring)	-	100	-
25(Supply connection and external flexible cords)	-	100	-
25.7(Supply connection and external flexible cords)	-	100	-
25.14(Supply connection and external flexible cords)	-	100	-
25.15(Supply connection and external flexible cords)	-	100	-
26.5(Terminals for external conductors)	-	100	-
27.5(Provision for earthing)	-	100	-
28.1(Screws and connections)	-	100	-
B.22.1(Construction)	-	100	-
B.22.3(Construction)	-	100	-
B.22.4(Construction)	-	100	-
B.22.5(Construction)	-	100	-

Complete

23 Jun, 2025

-
Included.w.e.f.24.01.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC)

1146

Aaditech Test and Calibration Lab LLP

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

ELECTRICAL

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. 6 IS 4159:2021"(Classification)	-	200	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	200	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	200	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	200	-
"Cl. 11 IS 4159:2021"(Heating)	-	200	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	200	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	200	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	200	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	200	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	200	-
"Cl. 18 IS 4159:2021"(Endurance)	-	200	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	200	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	200	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	200	-
"Cl. 22 IS 4159:2021"(Construction)	-	200	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	200	-
"Cl. 24 IS 4159:2021"(Components)	-	200	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	200	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	200	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	200	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	200	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	200	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	200	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	200	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	200	-
Cl.22.106(CONSTRUCTION)	-	200	-
19.11.4.7(Harmonics)	-	200	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	200	-
19.11.4.5(Immunity to conducted discharges)	-	200	-
19.11.4.4(Surge immunity test)	-	200	-
19.11.4.3(Fast transient bursts)	-	200	-
19.11.4.2(Radiated fields)	-	200	-
19.11.4.1(Electrostatic discharges)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.2 of IS 4159:2021(Marking)	-	200	-
Cl.7.3 of IS 4159:2021(Marking)	-	200	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	200	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	200	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	200	-
Cl.11.2 of IS 4159:2021(Heating)	-	200	-
Cl.11.101 of IS 4159:2021(Heating)	-	200	-
Cl.18 of IS 4159:2021(Endurance Test)	-	200	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.22.101 of IS 4159:2021(Construction)	-	200	-
Cl.22.103 of IS 4159:2021(Construction)	-	200	-
Cl.22.104 of IS 4159:2021(Construction)	-	200	-
Cl.22.105 of IS 4159:2021(Construction)	-	200	-
Cl.22.106 of IS 4159:2021(Construction)	-	200	-
Cl.22.107 of IS 4159:2021(Construction)	-	200	-
Cl.22.108 of IS 4159:2021(Construction)	-	200	-
Cl.22.109 of IS 4159:2021(Construction)	-	200	-
Cl.22.110 of IS 4159:2021(Construction)	-	200	-
Cl.22.111 of IS 4159:2021(Construction)	-	200	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	200	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	200	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	200	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	200	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	200	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	200	-
Cl.22.102 of IS 4159:2021(Construction)	-	200	-
"Cl. 6 IS 4159:2021"(Classification)	-	200	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	200	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	200	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	200	-
"Cl. 11 IS 4159:2021"(Heating)	-	200	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	200	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	200	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	200	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	200	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	200	-
"Cl. 18 IS 4159:2021"(Endurance)	-	200	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	200	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	200	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	200	-
"Cl. 22 IS 4159:2021"(Construction)	-	200	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	200	-
"Cl. 24 IS 4159:2021"(Components)	-	200	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	200	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	200	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	200	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	200	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	200	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	200	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	200	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	200	-
Cl.22.106(CONSTRUCTION)	-	200	-
19.11.4.7(Harmonics)	-	200	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	200	-
19.11.4.5(Immunity to conducted discharges)	-	200	-
19.11.4.4(Surge immunity test)	-	200	-
19.11.4.3(Fast transient bursts)	-	200	-
19.11.4.2(Radiated fields)	-	200	-
19.11.4.1(Electrostatic discharges)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.2 of IS 4159:2021(Marking)	-	200	-
Cl.7.3 of IS 4159:2021(Marking)	-	200	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	200	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	200	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	200	-
Cl.11.2 of IS 4159:2021(Heating)	-	200	-
Cl.11.101 of IS 4159:2021(Heating)	-	200	-
Cl.18 of IS 4159:2021(Endurance Test)	-	200	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.22.101 of IS 4159:2021(Construction)	-	200	-
Cl.22.103 of IS 4159:2021(Construction)	-	200	-
Cl.22.104 of IS 4159:2021(Construction)	-	200	-
Cl.22.105 of IS 4159:2021(Construction)	-	200	-
Cl.22.106 of IS 4159:2021(Construction)	-	200	-
Cl.22.107 of IS 4159:2021(Construction)	-	200	-
Cl.22.108 of IS 4159:2021(Construction)	-	200	-
Cl.22.109 of IS 4159:2021(Construction)	-	200	-
Cl.22.110 of IS 4159:2021(Construction)	-	200	-
Cl.22.111 of IS 4159:2021(Construction)	-	200	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	200	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	200	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	200	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	200	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	200	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	200	-
Cl.22.102 of IS 4159:2021(Construction)	-	200	-
"Cl. 6 IS 4159:2021"(Classification)	-	200	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	200	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	200	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	200	-
"Cl. 11 IS 4159:2021"(Heating)	-	200	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	200	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	200	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	200	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	200	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	200	-
"Cl. 18 IS 4159:2021"(Endurance)	-	200	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	200	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	200	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	200	-
"Cl. 22 IS 4159:2021"(Construction)	-	200	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	200	-
"Cl. 24 IS 4159:2021"(Components)	-	200	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	200	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	200	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	200	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	200	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	200	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	200	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	200	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	200	-
Cl.22.106(CONSTRUCTION)	-	200	-
19.11.4.7(Harmonics)	-	200	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	200	-
19.11.4.5(Immunity to conducted discharges)	-	200	-
19.11.4.4(Surge immunity test)	-	200	-
19.11.4.3(Fast transient bursts)	-	200	-
19.11.4.2(Radiated fields)	-	200	-
19.11.4.1(Electrostatic discharges)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.1 of IS 4159:2021(Marking)	-	200	-
Cl.7.2 of IS 4159:2021(Marking)	-	200	-
Cl.7.3 of IS 4159:2021(Marking)	-	200	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	200	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	200	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	200	-
Cl.11.2 of IS 4159:2021(Heating)	-	200	-
Cl.11.101 of IS 4159:2021(Heating)	-	200	-
Cl.18 of IS 4159:2021(Endurance Test)	-	200	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	200	-
Cl.22.101 of IS 4159:2021(Construction)	-	200	-
Cl.22.103 of IS 4159:2021(Construction)	-	200	-
Cl.22.104 of IS 4159:2021(Construction)	-	200	-
Cl.22.105 of IS 4159:2021(Construction)	-	200	-
Cl.22.106 of IS 4159:2021(Construction)	-	200	-
Cl.22.107 of IS 4159:2021(Construction)	-	200	-
Cl.22.108 of IS 4159:2021(Construction)	-	200	-
Cl.22.109 of IS 4159:2021(Construction)	-	200	-
Cl.22.110 of IS 4159:2021(Construction)	-	200	-
Cl.22.111 of IS 4159:2021(Construction)	-	200	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	200	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	200	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	200	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	200	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	200	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	200	-
Cl.22.102 of IS 4159:2021(Construction)	-	200	-

Complete

03 Sep, 2024

28 Aug, 2027

-
Included w.e.f 25.03.2025 Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7(EMI/EMC)

1147

DELHI TEST HOUSE KUNDLI-2

IS 9997 (2023)

ALUMINIUM ALLOY REDRAW RODS FOR ELECTRICAL PURPOSES - SPECIFICATION

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(General requirements)	-	500	-
Cl-5.2(Redraw rods)	-	500	-
Cl-6(Manufacture)	-	450	-
Cl-7.1, Table-2 (i)(Silicon)	-	400	-
Cl-7.1, Table-2 (ii)(Iron)	-	400	-
Cl-7.1, Table-2 (iii)(Copper)	-	400	-
Cl-7.1, Table-2 (iv)(Manganese)	-	400	-
Cl-7.1, Table-2 (v)(Magnesium)	-	400	-
Cl-7.1, Table-2 (vi)(Chromium)	-	400	-
Cl-7.1, Table-2 (vii)(Zinc)	-	400	-
Cl-7.1, Table-2 (viii)(Boron)	-	400	-
Cl-7.1, Table-2 (ix)(Vanadium + Titanium)	-	400	-
Cl-7.1, Table-2 (x)(Other each)	-	400	-
Cl-7.1, Table-2 (xi)(Others total)	-	400	-
Cl-7.1, Table-2 (xii)(Aluminium)	-	400	-
Cl-8.1, Table-3(UTS (MPa))	-	2000	-
Cl-8.1, Table-3(Elongation (%) - On 250 mm gauge length)	-	1000	-
Cl-8.1, Table-3(Resistivity (micro ohm.cm) at 20 oC)	-	1000	-
Cl-8.1, Table-3(Conductivity (%) (IACS))	-	1000	-
Cl-9(Electrical resistivity)	-	2000	-
Cl-10(Diameter and Permissible Variations)	-	650	-
Cl-11(Joints)	-	400	-
Cl-12(Finish and freedom from defects)	-	400	-
Cl-16(Marking)	-	300	-

Complete

31 Dec, 2026

-
Included w.e.f 03.03.2025

1148

BIS, Eastern Regional Laboratory (ERL)

IS 15030 (2022)

TEREPHTHALIC ACID - SPECIFICATION (First revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2-Table 1-(i) (Moisture content)	-
3.2-Table 1-(ii) (Colour, Pt-Co)	-
3.2-Table 1-(iii) (Ash content)	-
3.2-Table 1-(iv) (Acid value)	-
3.2-Table 1-(v) (Total of iron, cobalt, manganese, chromium and titanium)	-
3.2-Table 1-(vii) (4-carboxybenzaldehyde)	-
3.2-Table 1-(vi) (Total of sodium, magnesium, potassium, calcium and nickel)	-
3.2-Table 1-(viii) (4-carboxybenzaldehyde + p-toluic acid)	-

Partial

-
COMPLETE

1149

BIS, Eastern Regional Laboratory (ERL)

IS 10116 (2015)

Boric acid - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, 4.3, 4.4, Table 1 (Boric acid (as H3BO3 ))	-
4.2, 4.3, 4.4, Table 1 (Moisture)	-
4.2, 4.3, 4.4, Table 1 (Water insoluble matter)	-
4.2, 4.3, 4.4, Table 1 (Heavy metals (as Pb))	-
4.2, 4.3, 4.4, Table 1 (Iron (as Fe))	-
4.2, 4.3, 4.4, Table 1 (Ca)	-
4.2, 4.3, 4.4, Table 1 (As)	-
4.2, 4.3, 4.4, Table 1 (Na)	-
4.2, 4.3, 4.4, Table 1 (Cl)	-
4.2, 4.3, 4.4, Table 1 (Sulphate (as SO4 ))	-
4.2, 4.3, 4.4, Table 1 (Phosphate (PO4 ))	-
4.2 ( Description)	-

Partial

-
COMPLETE

1150

National Test House (WR), Mumbai

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 viii(Alkali content)	-	500	-
6.1 Table-2 vii(Chloride content)	-	500	-
6.1 Table-2 vi(Loss on ignition)	-	500	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	500	-
6.1 Table-2 iii.(Insoluble residue)	-	500	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	1000	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	500	-
7 Table-3 i.(Fineness)	-	1000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	500	-
7 Table-3 ii b(Expansion by Autoclave)	-	1000	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	2500	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	2500	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2500	-

Complete

24 Jul, 2025

-
-

1151

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

9650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	4100	VCM Content K - Value
4(Size of fitting)	-	0	Dimension
5.1 Table-1 Fig.1(Dimension of Socket length)	-	500	Socket Lengths & Diameter at mid point of Socket Length
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	0	Socket Lengths & Diameter at mid point of Socket Length
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	0	Socket Lengths & Diameter at mid point of Socket Length
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	0	Socket Lengths & Diameter at mid point of Socket Length
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	700	Opacity
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850	Short term Hydraulic test (27 °C/1hour)
8(Marking)	-	500	marking
3.2.3(socket, measurements)	-	500	-
6.3(Effect on water test)	-	3000	-

Complete

31 Dec, 2026

-
-

1152

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

9650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	500	Dimension
Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure)	-	0	Included in Dimension
Clause 3.2.2, and Fig. 2.(B)	-	500	Included in Dimension
Clause 3.2.2, and Fig. 2(Nominal size)	-	0	Included in Dimension
3.2.1, Table-1, Fig-1(Plumbing)	-	0	Included in Dimension
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	0	Included in Dimension
3.2.1, Table-1, Fig-1(B)	-	0	Included in Dimension
3.2.1, Table-1, Fig-1(Nominal size)	-	0	Included in Dimension
10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985)	-	1200	Sulphated ash content
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction))	-	3000	Effect on water
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts))	-	0	Effect on water
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	Effect on water
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction))	-	0	Effect on water
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction))	-	0	Effect on water
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts))	-	0	-
3.1(General)	-	4100	1100+3000

Complete

31 Dec, 2026

-
-

1153

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	VST
9.5(Tensile Strength IS 12235(Part 13))	-	1800	Tensile 1300+500
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1500	1000+500
9.3(Density IS 12235 (Part 14))	-	700	--
9.2(Internal Diameter)	-	500	--
9.1( Visual Appearance)	-	500	--
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1500	1000+500
8.4(Sealing rings - Hardness)	-	500	--
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	500	--
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	500	--
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	500	--
7.4 Table 8 & 9 Fig 1(Segmental length, l5)	-	500	--
7.4 Table 8 & 9 Fig 1(Segmental length, l4)	-	500	--
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	500	--
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	500	--
7.3.2(Rib height)	-	500	--
7.3.1(No.of Ribs)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter over Connection)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	1500	1000+500
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	500	--
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	500	--
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	500	--
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	500	--
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	500	--
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	1200	--
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	1200	700+500
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	3000	--
9.5(Tensile Strength IS 12235(Part 13))	-	1600	Tensile 1100+500
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1400	1100+300
9.3(Density IS 12235 (Part 14))	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	500	500
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000	-
4.1.2(K-Value as per IS-4669)	-	1100	-

Complete

31 Dec, 2026

-
-

1154

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

25650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	500	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1100	K – Value
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500	Dimension
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0	Included in Dimension
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	0	Included in Dimension
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	0	Included in Dimension
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	0	Included in Dimension
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	0	Included in Dimension
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	500	Visual appearance
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1200	Reversion (700+500)
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	700	Stress relief test
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1100	Vicat Softening temp. (VST)
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3500	Effect on sunlight for 1600 hrs*(Manual)
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500	Resistance to sulphic acid 55°C/14days + Sample Preparation (2000+500)
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1600	Resistance to external blow at 0°C(Impact) + Sample Preparation (1100+500)
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1800	Tensile strength (Before Exposure) + Sample Preparation (1300+500)
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	850	Axial Shrinkage (Type B pipe only) (90˚C/ 1 Hour)
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	Water tightness of joints
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000	Resistance to Dichloromethane at Specified temp.
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	500	Included in Dimension
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1200	Reversion 700+500
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500	Resistance to sulphic acid 55°C/14days + Sample Preparation
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1400	Resistance to external blow at 0°C(Impact) + Sample Preparation
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1350	Tensile strength (Before Exposure) + Sample Preparation
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	700	Axial Shrinkage (Type B pipe only) (90˚C/ 1 Hour)
8.6(Effect on Water Test)	-	3000	-

Complete

31 Dec, 2026

-
-

1155

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 9271 (2004)

Unplasticized polyvinyl chloride (UPVC) single wall corrugated pipes for drainage - Specification (First Revision)

16300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MATERIAL-(Conform to IS 10151))	-	3000	Material identification
5.1.3(MATERIAL- (Refer IS 4669))	-	1100	included in 5.1
8.2(Density-When tested in accordance with ]S 13360 (Part 3/Sec 1), the densi of the pipe shall be between 1.40 and 1.46 gm/cm3 .)	-	700	Density
8.5(Elongation Test-(Annex C,)- pipes shall not elongate more than 7.5 percent)	-	1300	Elongation test
7.4.2(Perforation Requirement-The maximum in flow area shall be 80 cm2/m length of pipe of all diameters)	-	500	Perforation Requirement
7.4.3(Perforation Requirement-The heght of corrugation -The depth of corrugations shall be 3 percent, Min of nominal outside diameter (dn).)	-	0	Perforation Requirement
7, Table 1(DIMENSIONS AND TOLERANCE-The nominal outside diameter and tolerances of the corrugated pipes shall be as per Table 1)	-	500	Dimension and tolerences
7.2, 8(Wall Thickness)	-	500	included in dimension and tolerences
7.3(Length)	-	500	included in dimension and tolerences
8.1.1(Visual Appearance, Workmanship and Finish)	-	500	Visual Appearance, Workmanship & Finish
8.1.2(Visual Appearance, Workmanship and Finish)	-	0	Visual Appearance, Workmanship & Finish
8.3,Table 3(Pipe stiffness-(Refer Annex A))	-	1100	Pipe Stiffness
8.4,Table 3(Impact Strength at 0 degree C- (refer Annex B))	-	1600	Impact strength at O °C 1100+500
8.6(BendIng Test-(Annex D,))	-	1000	Bending test
8.7(Joints)	-	1000	Joint test
7.4.1(Perforation Requirement- There sh.all be maximum 8 rows of perforation)	-	0	Perforation Requirement
6(TYPES- perforated or non-perforated types.)	-	0	-
8.8(The quantities of lead, dialkyl tin C4 and higher homologues (measured as tin), and any other toxic substances extracted from the internal walls of the pipes)	-	3000	--

Complete

31 Dec, 2026

-
-

1156

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

148625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	500	Classification of pipe
6.2.1 Annex B(Chloride Content of Resin)	-	2000	Chloride content of resin
6.3.1 Annex B(Chloride content)	-	4300	Resin Chlorine content
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	1100	Heat Deflection Temp. (HDT)
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	500	Density
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	500	Dimension of pipe
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	500	Outside diameter at any point
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	500	wall thickness
7.1.3 (Effective length)	-	500	Effective lenght
8(Pipe Ends)	-	500	Pipe ends ( Visual)
9.1(Visual Appearance)	-	500	Visual Appearance
9.2 IS 12235 (Part 3)(Opacity)	-	700	Opasity
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	3000	Effect on water
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	Effect on water
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	Effect on water
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	effect on water
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	Effect on water
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	Effect on water
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1200	Reversion 700+500
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1100	Vicat Softening temp. (VST)
9.6 IS 12235(Part 14)(Density)	-	500	Density
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	850	Hydrostatic Characteristics Acceptance test (20°C /1 h. ) 850
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	4800	Type test (95°C /165 h. ) 4800
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	11000	Type test (95°C /1000 h. ) 11000
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	109500	Thermal Stability by Hydrostatic Pressure Type Test 950C/ 8760 hr/12.50
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1500	Resistance to External Blow at 0 °C 1000+500
10.4 IS 12235(Part 19)(Flattening Test)	-	1100	Flattening Test
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1800	Tensile Strength 1300+500

Complete

31 Dec, 2026

-
-

1157

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	500	Marking
3(Type of Fitting)	-	500	Type of fitting
4(Size Designation)	-	500	Dimension
5(Colour of fittings)	-	500	Colour of fittings
7.1,Table 1(Wall thickness)	-	500	Included in Dimension
7.2 ,Table 2&3(Socket Dimensions)	-	500	Included in Dimension
7.3(Dimensions of waste trap(Nahani Trap)	-	500	Included in Dimension
8(Sealing Rings)	-	1550	Hardness of Sealing Ring 1050+500
10(Workmanship)	-	500	Workmanship
11(Design requirements)	-	500	Design Requirement (Visual) Access Opening (Optional)
11.1(Solvent cement type or Rubber ring type)	-	500	Included in Design Requirement (Visual)
11.2(Socket and spigot configeration)	-	500	Included in Design Requirement (Visual)
11.4,Table 5(Vent cowl)	-	500	Included in dimension
11.5,Table 6(Pipe Clips)	-	500	Included in Dimension
12.1(Visual appearance)	-	500	Visual Appearance
12.2(Stress relief test)	-	1200	Stress Relief test 700+500
12.3(Vicat softening tempewrature)	-	1100	Vicat Softening Temp. (VST)
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	Resistance to Sulphuric Acid ( 55 °C/14 days) 2000+500
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1200	Titanium Dioxide Content (TiO2)
Cl.15, Annex B(Sulphated Ash Content)	-	1200	Sulphated Ash Content
16.1(Impact test)	-	1100	Impact test (Drop test)
17(Watet tightness of joint)	-	850	Water Tightness of Joints
12.4(Effect on water test)	-	3000	-
11.3(Access Openings)	-	500	-
Table 4(Dimension of Access Openings)	-	500	-

Complete

31 Dec, 2026

-
-

1158

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	500	Dimension of Pipe & Socket
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	500	Dimension of Pipe & Socket
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	500	Dimension of Pipe & Socket
6.1.3 (Length of Pipe)	-	500	Dimension of Pipe & Socket
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	500	Dimension of Pipe & Socket
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	500	Dimension of Pipe & Socket
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	500	Dimension of Pipe & Socket
6.1.4, Table 3(iv) Length of spigot, l1)	-	500	Dimension of Pipe & Socket
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	500	Dimension of Pipe & Socket
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	500	Dimension of Pipe & Socket
6.1.4.1 (e3min=0.75e)	-	500	Dimension of Pipe & Socket
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	500	Dimension of Pipe & Socket
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	500	Dimension of Pipe & Socket
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	500	Dimension of Pipe & Socket
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	500	Dimension of Pipe & Socket
7.1(Appearance:- )	-	500	Appearance
7.2(Colour )	-	500	Colour
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1100	Vicat Softening temp. (VST)
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1200	Longitudinal Reversion 700+500
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1600	Resistance to External Blow at 0 °C 1100+500
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1600	Ring Stiffness 1100+500
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	850	Acceptance test (1 hr/270C)
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	11000	Type test (1000 hrs /600C)
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	500	-
9.2 IS 14182(b) Solvent cement)	-	500	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	0	Included in 10.2.1
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1000	Internal Negative Hydrostatic Pressure test (internal Vacuum) for Elastomeric Sealing ring joints
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	850	Internal Hydrostatic Pressure test for Elastomeric
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	0	Included in 10.1.2
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1200	Titanium Dioxide Content (TiO2
'7.5 (amdt.7)(Effect on Water (Type test))	-	3000	-

Complete

31 Dec, 2026

-
-

1159

DELHI TEST HOUSE, Azadhpur

IS 5168 (2018)

Glass feeding bottles - Specification (First Revision)

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Materials)	-	6000	NA
Cl 5.2(Description)	-	500	NA
Cl 5.3(Capacity)	-	1000	NA
Cl 5.4(Types, Dimensions and Wall Thickness)	-	1000	NA
Cl 5.5(Scale and Graduations)	-	1500	NA
Cl 5.7(Thermal Shock Resistance)	-	2500	NA
Cl 5.5(Scale and Graduations)	-	1500	NA
5.6(Limit of Alkalinity)	-	2000	NA
5.8(Migration of Heavy and toxic Elements)	-	5500	NA
Cl 5.3(Capacity)	-	250	NA
"Clause 5.2.1 Sub Clause.5.2.1.1 &5.2.1.2 "(Manufacture, workmanship, Finish and Appearance)	-	250	NA
Cl 5.7(Thermal Shock Resistance)	-	2000	NA

Complete

-
-

1160

DELHI TEST HOUSE, Azadhpur

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
4.2.3(Carbon Dispersion Test)	-	2500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5(Types and Features )	-	500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	150	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.3(Types and Features )	-	500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.6(Types and Features )	-	500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
6.1(Finish)	-	500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.1.1(Resistance to Deformation)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.1.2(Resistance to Deformation)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.2(Resistance to Impact)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.3(Test for Top Load Resistance)	-	1000	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.4(Tensile Strength)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.5(Flexural Modulus)	-	1500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.6(overall Migration)	-	3000	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	500	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.2 Table 2 (7)(Minimum Wall Thickness)	-	250	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
5.4(Wall Thickness above effective height)	-	250	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
9.1(Lid Thickness)	-	250	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
9.1(Man-Hole and Hand-Hole Lids)	-	250	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
9.2(Man-Hole and Hand-Hole Lids)	-	250	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
9.2.1(Man-Hole and Hand-Hole Lids)	-	250	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.3(Test for Top Load Resistance)	-	1000	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
6.1(Finish)	-	250	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
4.2.1(Density)	-	1000	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
7.6(overall Migration)	-	3000	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)
4.2.2(MFR)	-	1000	Rs. :-14500/-( UPTO SIZE 1000 LITRE WATER TANK) Rs.:- 20500/-(ABOVE 1000 LITRE TANK)

Complete

-
-

1161

DELHI TEST HOUSE, Azadhpur

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.5 Annex J(Product resistance test for printed pouches)	-	500	NA
7.4 Annex H(Ink adhesion test for printed pouches)	-	500	NA
7.3 Annex G(Drop test )	-	500	NA
7.2 Annex F(Stack Load test)	-	500	NA
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour)	-	1000	NA
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance)	-	500	NA
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction)	-	500	NA
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction)	-	500	NA
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction)	-	500	NA
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction)	-	500	NA
6.1.7 IS: 9845:1998(Migration- b. Colour migration)	-	3500	NA
6.1.7 IS: 9845:1998(Migration- a. Amount of extractive )	-	2000	NA
6.1.6(Width)	-	250	NA
6.1.5 A-2 of IS: 2508:2016(Thickness)	-	250	NA
6.1.4(Odour)	-	250	NA
6.1.3(Winding of the Film )	-	250	NA
6.1.2(Film Form)	-	250	NA
6.1.1(Description)	-	250	NA
5(Material)	-	750	NA
Clause 7.2(Water Potability test (after 30 Days) a) Taste b) Odour)	-	1000	NA
6.1.7(Migration test)	-	3500	NA
7.2(Water potability)	-	1000	NA
7.3(Stack load test)	-	1000	NA
7.6(Product resistance test)	-	500	NA
7.5(Ink adhesion test)	-	500	NA
Table 3((i) Barium)	-	500	NA
Table 3(ii) Cobalt)	-	500	NA
Table 3(iii) Copper)	-	500	NA
Table 3(iv) Iron)	-	500	NA
Table 3(v) Lithium)	-	500	NA
Table 3(vi) Manganese)	-	500	NA
Table 3(viii) Antimony)	-	500	NA
Table 3(ix) Phthalic acid, bis(2-ethylhexyl)ester (DEHP))	-	500	NA
6.1.10(Dart Impact Resistance)	-	1000	NA
9(Packing and Marking)	-	250	NA

Complete

-
-

1162

Indian Institute of Packaging, Delhi

IS 18482 (2023)

Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification

40130 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Sack Type)	-	0	-
5.2.1(Fabric)	-	11900	-
5.2.2(Linear density of tapes)	-	1199.99	-
5.2.4(Unlaminated fabric mass)	-	500	-
5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination)	-	500	-
5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric)	-	0	-
5.3.1.1.3(Total mass of BOPP film laminated woven fabric)	-	3499.99	-
5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination)	-	0	-
5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric)	-	0	-
5.3.1.2.3(The total mass of nonwoven laminated woven fabric)	-	0	-
5.4.1(Sack)	-	500	-
5.4.1.1(Centre seam)	-	0	-
5.4.1.2(Bottom seam)	-	5100	-
5.4.2(Sack)	-	0	-
5.4.3(Sack)	-	1599.99	-
5.4.5(Liner)	-	4500	-
6.1.1, Table 1(Inside length)	-	500	-
6.1.1, Table 1(Inside width)	-	500	-
6.1.1, Table 1(Gusset width)	-	0	-
6.1.1, Table 1(Warp per dm)	-	500	-
6.1.1, Table 1(Weft per dm)	-	0	-
6.1.1, Table 1(Mass of laminated fabric)	-	500	-
6.2, Table 1(Average breaking strength - Lengthwise)	-	1100	-
6.2, Table 1(Average breaking strength - Widthwise)	-	1600	Breaking Strength: 1100/- and Specimen Preparation Charge: 500/-
6.2, Table 1(Breaking strength of bottom seam)	-	1600	Seam Strength: 1100/- and Specimen Preparation Charge: 500/-
6.2, Table 1(Breaking strength of centre seam)	-	0	-
6.2, Table 1(Average elongation at break of fabric - Lengthwise)	-	0	-
6.2, Table 1(Average elongation at break of fabric - Widthwise)	-	0	-
6.3(Average breaking strength - Lengthwise after UV exposure)	-	12880	CHARGES FOR UV EXPOSURE : 10180/-; Breaking Strength both direction: 2200/- and Specimen Preparation Charge: 500/-
6.3(Average breaking strength - Widthwise after UV exposure)	-	0	-
6.4(Drop Impact Testing of Filled Sacks)	-	1600	Drop Test: 1100; Sample Preparation Charge: 500/-
Clause 6.5 Table 1 viii(Ash content)	-	1199.99	-

Complete

-
-

1163

DELHI TEST HOUSE, Azadhpur

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	2500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	1250	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	700	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	2000	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength )	-	1000	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	1000	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength )	-	2000	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	2000	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	2000	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)( Indivdual Compressive strength)	-	2500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	500	NA
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	500	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	500	NA
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	250	NA
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	250	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	250	NA
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	250	NA
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	250	NA
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	250	NA
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	250	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	250	-
Clause 7.1.3 (Colour and Texture)	-	250	NA
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	250	NA
10(Marking)	-	250	NA
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	250	NA
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	250	NA
Clause 7.1.1 (General Quality)	-	250	NA
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	250	NA
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	250	NA
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	250	NA

Complete

-
-

1164

DELHI TEST HOUSE, Azadhpur

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	500	NA
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	2000	NA
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	NA
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	NA
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	NA
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	250	NA
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	250	NA
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	250	NA
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	250	NA
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	500	NA
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	500	NA
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1000	NA
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3000	NA
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2000	NA
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1000	NA
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	2000	NA
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1000	NA
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	NA
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000	NA
8.6(Effect on Water Test)	-	4500	NA

Complete

-
-

1165

DELHI TEST HOUSE, Azadhpur

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

35500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	1500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl 9.3(Load In One Direction)	-	1500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl 7.2(Weight)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl 5(Deformations and Surface Characteristics)	-	10000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Sulphur and phosphorous)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(CE)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1( Nitrogen%)	-	2000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Ni)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Mo)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Cr)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1( Ti)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(V)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1( Nb)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1( Aluminium %)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1( Copper %)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Sulphur %)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Phosphorus %)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Manganese %)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.1(Carbon %)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 9.3, Table 4(Bend Test )	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 8.1 Table 3(TS/YS ratio)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 8.1 Table 3(Yield Stress (YS))	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 7.2 Table -2 (Nominal Mass)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	0	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	2000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
8.18.1 Table 3(Total elongation at maximum force)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl 5(Deformations and Surface Characteristics)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
5.7(PullOut (Bond Test))	-	10000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.2(Niobium (Nb))	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
4.2(Boron (B))	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 8.1 Table 3(TS/YS Ratio)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	1000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Cl. 5.2(Surface Characteristics)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
Clause 6.3(Effective Cross-sectional Area)	-	500	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM
5.7(Pull-out test - IS:2770(P1))	-	10000	Rs. 25000/-For SIZE UPTO 25 MM) Rs. 35000/-For SIZE ABOVE 25 MM

Complete

-
-

1166

DELHI TEST HOUSE, Azadhpur

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 12 & 13(Length, Width & Thickness)	-	1000	NA
7.1(Carbon %)	-	500	NA
7.1(Manganese %)	-	500	NA
7.1(Phosphorus %)	-	500	NA
7.1(Sulphur %)	-	500	NA
7.1(Silicon %)	-	500	NA
7.1( Copper %)	-	500	NA
7.1( Aluminium %)	-	500	NA
7.1( Nb)	-	500	NA
7.1(V)	-	500	NA
7.1( Ti)	-	500	NA
7.1(Cr)	-	500	NA
7.1(Mo)	-	500	NA
7.1(Ni)	-	500	NA
7.1( Nitrogen%)	-	2000	NA
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	2000	NA
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	500	NA
Cl. 12, 13(Camber)	-	500	NA
Cl. 12, 13(Thickness)	-	500	NA
Cl. 8, Table 3(Elongation)	-	1000	NA
Cl. 8, Table 3(Yield Stress)	-	1000	NA
Cl 12 & 13(Length, Width & Thickness)	-	1000	NA
Cl 11(Workmanship)	-	250	NA
8.0 (1)(Tensile Strength-IS:1608(P1))	-	1000	NA
8.0 (2)(Yield Strength-IS:1608(P1))	-	1000	NA
8.0 (3)(Elongation on 5.65 SoA GL-IS:1608(P1))	-	1000	NA
Table 1 ( Clauses 7.1 ,7.2 )(Tungsten (W))	-	500	NA
Table 1 ( Clauses 7.1 ,7.2 )(Boron (B))	-	500	NA

Complete

-
-

1167

DELHI TEST HOUSE, Azadhpur

IS 446 (2017)

Rubber hoses, textile - Reinforced, for compressed air - Specification (Fifth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2, Table 3(Low temperature Flexibility)	-	1000	NA
7.2, Table 3(Flexibility at 23°C)	-	1000	NA
7.2, Table 3(Ozone Resistance)	-	2500	NA
7.2, Table 3(Adhesion between Components- Cover and Reinforcement)	-	1500	NA
7.2, Table 3(Adhesion between Components- Reinforcement layers)	-	1500	NA
7.2, Table 3(Adhesion between Components- Lining and Reinforcement)	-	1500	NA
7.2, Table 3(Minimum Bursting Pressure for type 3)	-	1000	NA
7.2, Table 3(Minimum Bursting Pressure for type 2)	-	1000	NA
7.2, Table 3(Minimum Bursting Pressure for type 1)	-	1000	NA
7.2, Table 3(Change in Diameeter at Maximum working Pressure)	-	1000	NA
7.2, Table 3(Change in Length at Maximum working Pressure)	-	1000	NA
7.2, Table 3(Proof Pressure at 23°C for type 3)	-	1000	NA
7.2, Table 3(Proof Pressure at 23°C for type 2)	-	1000	NA
7.2, Table 3(Proof Pressure at 23°C for type 1)	-	1000	NA
7.1, Table 2(Resistance to Liquid , Increase in Volume (Class C only)-Cover)	-	2000	NA
7.1, Table 2(Resistance to Liquid , Increase in Volume (Class B only)-Lining)	-	2000	NA
7.1, Table 2(Accelerated Ageing for all types: Change in Elongation of Cover of its original value)	-	3000	NA
7.1, Table 2(Accelerated Ageing for all types: Change in Tensile Strength of Cover of its original value)	-	3000	NA
7.1, Table 2(Elongation at Break of Cover of all types)	-	3000	NA
7.1, Table 2(Elongation at Break of Lining of all types)	-	1000	NA
7.1, Table 2(Tensile Strength of Cover)	-	1000	NA
7.1, Table 2(Tensile Strength of Lining)	-	1000	NANA
6, Dimensions(Thickness of Cover of Type 3)	-	500	NA
6, Dimensions(Thickness of Cover of Type 2)	-	500	-
6, Dimensions(Thickness of Cover of Type 1)	-	500	-
6, Dimensions(Tolerance on Length)	-	500	NA
6, Dimensions(Concentricity)	-	500	NA
5(Material and Construction)	-	500	NA
Cl 7.2 & Table 3(Low-temperature flexibility)	-	500	NA
Cl 7.2 & Table 3(Flexibility at 23 °C)	-	500	NA
Cl 7.2 & Table 3(Ozone resistance)	-	2000	For BIS samples: 1.5 times of BIS testing charges
Cl 7.2 & Table 3(Adhesion between components)	-	2000	NA
Cl 7.2 & Table 3(Minimum burst pressure)	-	1000	NA
Cl 7.2 & Table 3(Change in diameter at maximum working pressure)	-	1000	NA
Cl 7.2 & Table 3(Change in length at maximum working pressure)	-	1000	NA
Cl 7.2 & Table 3(Proof pressure)	-	1000	NA
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (max.) (class C only) )	-	2000	NA
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (max.) (class B only) )	-	2000	NA
Cl 7.1 & Table 2(Resistance to liquids-Increase in volume (class A))	-	2000	NA
Cl 7.1 & Table 2(Resistance to ageing-Change in elongation at break from original value (max.) original value (max.) )	-	1000	NA
Cl 7.1 & Table 2(Resistance to ageing-Change in tensile strength from original value (max.) )	-	1000	NA
Cl 7.1 & Table 2(Minimum elongation at break)	-	500	NA
Cl 7.1 & Table 2(Minimum tensile strength)	-	500	NA
Cl 6.4(Minimum thickness of lining and cover-Type 3)	-	500	NA
Cl 6.4(Minimum thickness of lining and cover-Type 2 )	-	500	NA
Cl 6.4(Minimum thickness of lining and cover-Type 1 )	-	500	NA
Cl 6.3(Tolerance on length)	-	500	NA
Cl 6.2(Concentricity)	-	500	NA
Cl 6.1 & Table 1(Internal diameters and tolerances)	-	500	NA
Cl 5(Materials and construction)	-	500	NA

Complete

-
-

1168

National TEST HOUSE-ER

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	1500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	1000	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	2000	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	500	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	500	-
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	500	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	500	-

Complete

14 Jun, 2027

-
-

1169

National TEST HOUSE-ER

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Fe 415 to Fe 700, size 8mm-40mm

29500 View breakup
A. Chemical Test : Without Micro Alloying elements: Rs 2000/- B. Chemical with Micro Alloying element : Rs. 4000/- C. Mechanical Test without pull out a. 6-12 mm - Rs. 8000/- b. 16-25 mm - Rs. 9000/- c. 28-32 mm - Rs. 10000/- Pull out additional : i. 6-12 mm - Rs. 10000/- ii. 16-25 mm : Rs. 15000/- iii. 28-32 mm : Rs. 15000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	2360	Inclusive of GST@18%
Cl 9.3(Load In One Direction)	-	3540	Inclusive of GST@18%
Cl 8.1(UTM)	-	3540	Inclusive of GST@18%
Cl 7.2(Weight)	-	1180	Inclusive of GST@18%
Cl 6.1(Length, Width & Thickness)	-	1180	Inclusive of GST@18%
Cl 9.3(Load In One Direction)	-	3540	Inclusive of GST@18%
Cl 8.1(UTM)	-	3540	Inclusive of GST@18%
Cl 5(Deformations and Surface Characteristics)	-	1000	Visual inspection with naked eye for surfce defects
4.1(Carbon %)	-	1416	Inclusive of GST@18%
4.1(Sulphur %)	-	1416	Inclusive of GST@18%
4.1(Phosphorus %)	-	1416	Inclusive of GST@18%
4.1(Manganese %)	-	1416	Inclusive of GST@18%
4.1(Silicon %)	-	1416	Inclusive of GST@18%
4.1( Nitrogen%)	-	2360	Inclusive of GST@18%
4.1(CE)	-	2360	Inclusive of GST@18%
5.7(PullOut (Bond Test))	-	15000.00	Fee is dependent on size and exclusive of GST. Up to 12mm - Rs 10000.00 +GST Above 12mm - Rs 15000.00 +GST
Clause 9.4(Rebend Test)	-	1000	-
Cl. 9.3, Table 4(Bend Test )	-	1000	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000	-
Cl. 7.2 Table -2 (Nominal Mass)	-	1000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	1000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	1000	-
Cl. 4.3(Visual Inspection.)	-	1000	-
Cl. 8.1 Table 3(TS/YS ratio)	-	1000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	500	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	1000	-

Complete

14 Jun, 2027

-
-

1170

National TEST HOUSE-ER

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

E 250 TO E 650 (Grade - A, B, C, BR & B0 )

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	2000	-
Clause 11.3(Bend Test)	-	1000	-
Clause 12(Impact Test)	-	4000	-
Clause 15, Table 4(Dimension)	-	1000	-
Cl 18(Weight)	-	1000	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	1000	-
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	1000	-

Complete

14 Jun, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number