BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11971

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

Grade I & Grade II

3150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6.2(Diameter & Ovality)	-	1500	For complete cl 6
Cl 6.2(Weight)	-	1500	For complete cl 6
Cl 8.2(Bend test)	-	500	For complete cl 8
Cl 9.3(Press)	-	500	For complete cl 9
Cl 9.3(Press)	-	500	For complete cl 9
Cl 5.1(Workmanship)	-	500	For complete cl 5
Clause -4, 4.3(TITANIUM)	-	1000	For Complete Chemical testing, if required
Clause -4, 4.2(VANADIUM)	-	650	For Complete Chemical testing, if required
Clause -4, 4.1(NIOBIUM)	-	650	For Complete Chemical testing, if required
Clause -4, 4.1(Molybdenum)	-	650	For Complete Chemical testing, if required
Clause -4, 4.1(Chromium)	-	650	For Complete Chemical testing, if required
Clause -4, 4.1(Nickel)	-	650	For Complete Chemical testing, if required
Clause -4, 4.1( ALUMINIUM)	-	650	For Complete Chemical testing, if required
Clause -4, 4.1(SILICON)	-	650	For Complete Chemical testing, if required
Clause -4, 4.1(NITROGEN)	-	650	For Complete Chemical testing, if required
Clause -4, 4.1(MANGANESE)	-	650	For Complete Chemical testing, if required
Clause -4, 4.1(PHOSPHURS)	-	650	For Complete Chemical testing, if required
Clause -4, 4.1(SULPHUR)	-	650	For Complete Chemical testing, if required
Clause -4, 4.1( CARBON)	-	650	For Complete Chemical testing, if required
Clause 8.1(Elongation)	-	650	For Complete Cl 8
Clause 8.1(Yield Stress)	-	1000	For Complete Cl 8
Clause 6.1(Size)	-	1000	For Complete Cl 6
Clause 8.1(Ultimate Tensile Stress)	-	1000	For Complete Cl 8
Clause 4(By Calculation)	-	1000	-
Clause 4(By Calculation)	-	1000	-
Clause 4(Copper)	-	1000	For Complete Chemical testing, if required

-
-

11972

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table-1(Sizes Diameter of Line wire)	-	750	For Complete Dimensional and Tolerances
5 Table-1(Sizes Diamater of Point wire)	-	750	For Complete Dimensional and Tolerances
5 Table-1(Sizes Mass of Completed barbed wire)	-	750	For Complete Dimensional and Tolerances
5 Table-1(Sizes Distance between two barbs)	-	750	For Complete Dimensional and Tolerances
5 Table-1(Sizes No. of Lays between the two consequtive barbs)	-	750	For Complete Dimensional and Tolerances
12.1(Tensile Strength)	-	1500	For Complete Tensile Test
12.3(Ductility)	-	1000	For Complete Ductility Test
12.2(Uniformity of zinc coating)	-	350	For Complete Cl 12
7.2(Manufacture)	-	750	For Complete Dimensional and Tolerances
7.3(Manufacture)	-	750	For Complete Dimensional and Tolerances
9.1(Freedom from defects)	-	750	For Complete Cl 9
9.2(Freedom from defects)	-	750	For Complete Cl 9
12.1(Breaking load)	-	1500	For Complete Cl 12
12.2.1(Mass of zinc coating (line wire))	-	1500	For Complete Cl 12
12.2.2(Mass of zinc coating (point wire))	-	1500	For Complete Cl 12
Cl. 7.2(Cut Angle)	-	750	For Complete Cl 7
Cl. 7.2(Length of Barbs)	-	750	For Complete Cl 7
Cl. 7.2(Finishing of Barbs)	-	750	For Complete Cl 7
Cl. 7.1(General)	-	750	For Complete Cl 7
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	750	For complete Chemical Testing, if required
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	750	For complete Chemical Testing, if required
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	750	For complete Chemical Testing, if required
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	750	For complete Chemical Testing, if required
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	750	For complete Chemical Testing, if required

-
-

11973

CENTRAL INSTITUTE OF ROAD TRANSPORT (CIRT), PUNE

7105101

IS 16192 : Part 1 (2014)

Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 1 light alloy wheel rims - Method of tests and requirements

Wheel rims for two and three wheeled vehicles

182000 View breakup
For tubeless = Rs. 1,82,000/- For Tube type = Rs. 1,79,300/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Rotation Bending Fatigue Test (Dynamic Cornering Fatigue Test))	-	72944	Test charges for Rotation Bending Fatigue Test (Dynamic Cornering Fatigue Test) No. of Cycles 100000
4.3.1(Radial Load Durability Test)	-	63034	Test charges for Radial Load Durability Test.No. of Cycles 500000
4.4.1(Radial Impact Resistance Test)	-	7700	Test Charges for Radial Impact Resistance Test, Marking and air leakage test
4.5.1(Torsion Moment Test)	-	38222	Test charges for Torsion Moment Test.No. of Cycles 100000
4.6.1(Air Leak Test (Tubeless Tyres Wheel Rim))	-	7700	Test Charges for Radial Impact Resistance Test, Marking and air leakage test
4.2.1(Rotation Bending Fatigue Test (Dynamic Cornering Fatigue Test))	-	72944	Test charges for Rotation Bending Fatigue Test (Dynamic Cornering Fatigue Test) No. of Cycles 100000
4.3.1(Radial Load Durability Test)	-	63034	Test charges for Radial Load Durability Test.No. of Cycles 500000
4.4.1(Radial Impact Resistance Test)	-	7700	Test Charges for Radial Impact Resistance Test, Marking and air leakage test
4.5.1(Torsion Moment Test)	-	38222	Test charges for Torsion Moment Test.No. of Cycles 100000
4.6.1(Air Leak Test (Tubeless Tyres Wheel Rim))	-	7700	Test Charges for Radial Impact Resistance Test, Marking and air leakage test

15 Sep, 2028

-
Included w.e.f. 31.05.2023

11974

EAMP Laboratories LLP, Palghar

7171526

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

18675 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against live parts)	-	500	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	500	-
10(POWER INPUT AND CURRENT)	-	500	-
11(HEATING)	-	500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1500	-
14(TRANSIENT OVERVOLTAGES)	-	2000	-
15(MOISTURE RESISTANCE)	-	2000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1500	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
19(ABNORMAL OPERATION)	-	1500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	500	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	500	-
30(RESISTANCE TO HEAT AND FIRE)	-	500	-
31(RESISTANCE TO RUSTING)	-	500	-
6.0(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against live parts)	-	0	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	0	-
14(TRANSIENT OVERVOLTAGES)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	0	-
30(RESISTANCE TO HEAT AND FIRE)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
4(General requirements)	-	300	-
5(General Conditions of tests)	-	375	-
19.11.4.4(Surge immunity test)	-	0	-
6.0(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8(Protection against live parts)	-	0	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	0	-
14(TRANSIENT OVERVOLTAGES)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	0	-
30(RESISTANCE TO HEAT AND FIRE)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
4(General requirements)	-	0	-
5(General Conditions of tests)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-

13 Sep, 2028

-
Included w.e.f. 13.06.2023. Exclusion: Cl.32 (RADIATION, TOXICITY AND SIMILAR HAZARDS), Cl.19.11.4.1 (Electrostatic discharges), Cl.19.11.4.2 (Radiated fields), Cl.19.11.4.3 (Fast transient bursts), Cl.19.11.4.6 (Class 3 Voltage dips and interruptions), Cl.19.11.4.7 (Harmonics), Cl.19.11.4.5 (Injected currents)

11975

CENTRAL INSTITUTE OF ROAD TRANSPORT (CIRT), PUNE

7105101

IS 16192 : Part 2 (2014)

Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 2 sheet metal wheel rims - Method of tests and requirements

Wheel Rims for Two and Three Wheeled Vehicles

110000 View breakup
For 2 Wheeler - Sheet Metal Ri (M/C)= Rs. 1,23,000/- For 2 Wheeler - Sheet Metal Rim (Scooter) = 1,10,000/- For 3 Wheeler - Sheet Metal Rim = Rs. 52,500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3.4(a) For three wheeled vehicles: 18000 load cycle)	-	16000	CFT for Three Wheeler Vehicle Sheet Metal Rim
4.2.3.4(b) For two wheeled vehicles:no of cycle 105 )	-	73000	CFT for Two wheeler Vehicle Sheet Metal Rim
4.2.4(Dynamic Radial Fatigue Test (RFT))	-	37000	RFT for Two wheeler( Scooter) Vehicle Sheet Metal Rim & Three wheeler Sheet metal Rim
4.2.3.4(a) For three wheeled vehicles: 18000 load cycle)	-	16000	CFT for Three Wheeler Vehicle Sheet Metal Rim
4.2.3.4(b) For two wheeled vehicles:no of cycle 105 )	-	73000	CFT for Two wheeler Vehicle Sheet Metal Rim
4.2.4(Dynamic Radial Fatigue Test (RFT))	-	37000	RFT for Two wheeler( Scooter) Vehicle Sheet Metal Rim & Three wheeler Sheet metal Rim
4.2.3.4(a) For three wheeled vehicles: 18000 load cycle)	-	-	-
4.2.3.4(b) For two wheeled vehicles:no of cycle 105 )	-	-	-
4.2.4(Dynamic Radial Fatigue Test (RFT))	-	-	-

15 Sep, 2028

-
Included w.e.f. 31.05.2023

11976

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 15827 (2019)

Cladding films for greenhouse / polyhouse - Specifications (First Revision)

601114.5 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Material Identification)	-	2000.00	-
6.1(Appearance & surface finish)	-	500.00	-
6.2(Durability ref clause No. 7.5)	-	0.00	CONDITIONING CHARGE- 1874000.00
7.1(Visual)	-	500.00	-
Cl. no. 6.3 & Table 2(Tensile strength & elongation at break (TD & MD))	-	3100.00	Testing Charge- 2600.00 SPECIMEN PREPARATION CHARGE- 500.00
6.3(Dart Drop test)	-	1600.00	Testing Charge-1100.00 SPECIMEN PREPARATION CHARGE- 500.00
6.3(Total Visible Light Transmittance)	-	700.00	-
6.3(Haze)	-	700.00	-
6.3(Tear Strength ( MD & TD))	-	2700.00	Testing Charge- 2200.00 SPECIMEN PREPARATION CHARGE- 500.00
7.4(IR eefectiveness)	-	3000.00	TEST CHARGES - 2500.00 SPECIMEN PREPARATION CHARGE- 500.00
7.2(width)	-	500.00	-
7.3(Elongation under Steady Load MD)	-	1600.00	Testing Charge-1100.00 SPECIMEN PREPARATION CHARGE- 500.00
7.5(Elongation after UV Exposure MD)	-	1100.00	-

24 Apr, 2027

-
-

11977

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

TYPE-I, II, III, IV & V

17155 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050	IDENTIFICATION
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	-
4.2(Tapes – Linear Density )	-	500	OPTIONAL
4.3(Sacks)	-	300	VISUAL INCLUDES VISUAL OF BOTTOM SEAM
4.3.1(Bottom Seam)	-	0	-
4.3.1(The number of stitches/dm)	-	500	OPTIONAL
4.3.2(Mouth)	-	300	VISUAL (OPTIONAL)
4.4 and Table 1 i(Capacity)	-	250	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	INCLUDE LENGTH & WIDTH
5.2 and Table 1 iii(Ends per dm )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
5.1 and Table 1 v(Mass of sack )	-	250	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100	INCLUDES : AVERAGE BREAKING STRENGTH & ELONGATION AT BREAK
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100	INCLUDES : AVERAGE BREAKING STRENGTH & ELONGATION AT BREAK
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	0	INCLUDES : AVERAGE BREAKING STRENGTH & ELONGATION AT BREAK
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0	INCLUDES : AVERAGE BREAKING STRENGTH & ELONGATION AT BREAK
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	INCLUDES: UV RESISTANCE WEATHERING (192 Hrs.) , 10180/-( DISCOUNT NOT APPLICABLE) AVERAGE BREAKING STRENGTH- LENGTHWISE (1100/-) WIDTH WISE (1100/-)
5.2 and Table 1 x(Ash content )	-	950	-
5.2 and Table 1 x(Ash content )	-	0	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	-

-
-

11978

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

GUSSETED TYPE & NON-GUSSETED TYPE

23605 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material )	-	1050	IDENTIFICATION
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	250	-
4.2 (Fabric)	-	1050	IDENTIFICATION
4.2 (Linear Density, 900 denier)	-	500	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	250	-
4.4(Seam )	-	300	VISUAL
4.4(Seam)	-	1050	IDENTIFICATION
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	LINEAR DENSITY
4.4(The number of stitches/dm shall be 14 ± 2.)	-	250	-
4.5(Lamination )	-	1050	IDENTIFICATION
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	400	-
4.7(Valve for Filling of Sacks)	-	250	VISUAL
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	INCLUDES: LENGTH WIDTH WIDTH OF GUSSETS WIDTH OF VALVE DEPTH OF GUSSETS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	250	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	250	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	500	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	500	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1100	INCLUDES: AVERAGE BREAKING STRENGTH & ELONGATION AT BREAK
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1100	INCLUDES: AVERAGE BREAKING STRENGTH & ELONGATION AT BREAK
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	500	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	950	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	950	-
5/5.6 (UV Resistance, )	-	10180	UV RESISTANCE WEATHERING (192 Hrs.) CHARGES
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1100	AVERAGE BREAKING STRENGTH
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1100	AVERAGE BREAKING STRENGTH
4.3(Sacks)	-	250	-

-
-

11979

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

HDPE/PP WOVEN SACKS

17080 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Material Identification)	-	1050	-
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	-
3.3.1(Bottom seam (IS 10789))	-	250	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	250	-
4.2 and Table 1 ii(Dimensions )	-	250	INCLUDES: LENGTH & WIDTH
5.2 and Table 1 iii(Ends per dm )	-	200	-
5.2 and Table 1 iv(Picks per dm )	-	200	-
4.2 and Table 1 v(Mass of sack )	-	300	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	2200	INCULUDES: AVERAGE BREAKING STRENGTH & ELONGATION AT BREAK LENGTH WISE (1100/-) WIDTH WISE (1100/-)
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	0	INCULUDES: AVERAGE BREAKING STRENGTH & ELONGATION AT BREAK LENGTH WISE (1100/-) WIDTH WISE (1100/-)
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	INCULUDES: AVERAGE BREAKING STRENGTH & ELONGATION AT BREAK LENGTH WISE (1100/-) WIDTH WISE (1100/-) UV RESISTANCE WEATHERING: (10180/-)
4.2 and Table 1 x(Ash content )	-	950	Additional Charges
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	900	Additional Charges
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	1100	Additional Charges Includes: tenacity & Elongation of the tape
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	0	Additional Charges
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	850	Additional Charges
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	700	Additional Charges
3.2(Unlaminated Fabric Mass )	-	300	Additional Charges

-
Exclusion: Cl.3.2 (Colour Fastness for pigmented tapes)

11980

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 9755 (2021)

Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers

TYPE-I & II

21692 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Meterial)	-	1050	IDENTIFICATION (OPTIONAL)
4.2("Fabric b) Linear Density")	-	500	-
4.2("Fabric c) Mesh")	-	500	-
4.2("Fabric d) Unlaminated Fabric Mass")	-	250	-
4.3(Sacks)	-	300	VISUAL
4.4.1(Loose Liner)	-	250	-
4.4.1(Thickness of Linear)	-	250	-
4.4.2(Visual Observation)	-	300	-
4.4.3(Bottom Seam of Loose Liner)	-	300	-
4.5(Mass of The Lamination)	-	250	-
4.5(Laminated Fabric)	-	300	-
4.6.1(Distance between the Two Row of Stitches)	-	300	-
4.7(Mouth of the Sack)	-	300	-
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension a) Inside Length Type 1 & Type 2 ")	-	250	INCLUDES LENGTH & WIDTH
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension b) Inside Width ")	-	0	-
"Table 1 of Cl. No.5.1 Sl. No. ii"(Ends/dm ( Type 1 & Type 2))	-	250	-
"Table 1 of Cl. No.5.1 Sl. No. iii"(Picks /dm ( Type 1 & Type 2))	-	250	-
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric a) Unlaminated Sack( Type 1 & Type 2)")	-	250	-
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric b) Laminated Sack( Type 1 & Type 2)")	-	250	-
"Table 1 of Cl. No.5.3 Sl. No. v"(Mass of Sack( Type 1 & Type 2))	-	250	-
"Table 1 of Cl. No.5.4 Sl. No. vi"(Avg. Breaking Strength Of fabric (Ravelled strip method)( 325mm X 25 mm))	-	3300	AVERAGE BREAKING STRENGTH & ELONGATION OF FABRIC IN LENGTH WISE (1100/-) WIDTH WISE (1100/-) WIDTH WISE (LAMINATED JOINTS) (1100/-)
"Table 1 of Cl. No.5.4 Sl. No. vii"(Breaking Strength of Bottom Seam (Ravelled strip method))	-	1100	-
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric a)Length(Type 1 & Type 2)")	-	0	AVERAGE BREAKING STRENGTH & ELONGATION OF FABRIC IN LENGTH WISE (1100/-) WIDTH WISE (1100/-)
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric b) Width(Type 1 & Type 2)")	-	0	AVERAGE BREAKING STRENGTH & ELONGATION OF FABRIC IN LENGTH WISE (1100/-) WIDTH WISE (1100/-)
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content a) For UV Stabilized Sack")	-	950	-
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content b) For Non- UV Stabilized Sack")	-	950	-
"Table 1 of Cl. No.5.6 Sl. No. x"(Drop Impact Strength)	-	500	-
Cl. No.5.7(UV Resistance)	-	12380	INCLUDES: UV RESISTANCE WEATHERING (10180/-) AVERAGE BREAKING STRENGTH IN LENGTH WISE (1100/-) WIDTH WISE (1100/-)
Cl. No.5.2(Visual Observation)	-	250	Tape Visual: 250/- Linear Density: 500/- Tanacity & Elongation of the Tape: 1100/- Width of the Tape: 250/- Thickness of tape: 200/- Heat Shrinkage (@ 60°C & 95°C): 850/-
4.6.1(Depth of the Stitch( Double fold))	-	250	-

-
-

11981

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 11584 (1986)

Specification for high density polyethylene (Hdpe) crates for milk satchets

HDPE CRATES FOR MILK SATCHETS

7838 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Material Identification)	-	1050	-
2.2(Material )	-	1600	CL. NO.: 2.2- DENSITY & MELT FLOW INDEX (500 + 1100)
2.3(Shape and Dimensions)	-	500	-
2.4(Mass )	-	300	-
2.5(Appearance and Surface Finish)	-	300	-
2.7(Resistance to Stress)	-	1000	-
2.8(Resistance to Applied Load)	-	1000	-
2.9(Strength)	-	3400	CL. NO: 2.9.1 RESISTANCE TO DROP (1100/-) 2.9.2 RESISTANCE TO LOW TEMP. DROP (1100/- + 1200/-) TOTAL= 3400/-
2.1(Dimensional Stability)	-	900	-

-
-

11982

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 11805 (2007)

Polyethylene pouches for packaging liquid milk - Specification - (Second Revision)

FULL RANGE

7050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Visual)	-	250	VISUAL+FILM FORM+ WINDING OF FILM+ ODOUR (ALL INCLUDE 250/-)
5.2(Film form)	-	0	-
5.3(winding)	-	0	-
5.4(Odour)	-	0	-
5.5(Thickness)	-	250	-
5.6(Width)	-	250	-
5.7(Tensile Strength)	-	2200	TENSILE STRENGTH + ELONGATION AT BREAK =1100 (1100+1100) IN BOTH DIRECTION
5.8(Elongation at Break)	-	0	TENSILE STRENGTH + ELONGATION AT BREAK =1100 (1100+1100) IN BOTH DIRECTION
5.9(Dart Impact Resistance)	-	850	-
5.10(Slip (Coefficient of Friction))	-	850	-
8.1(Leak Test)	-	400	-
8.2(Drop Test)	-	1100	-
8.3(Ink adhesion test)	-	500	-

-
-

11983

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 10889 (2004)

High density polyethylene films (First Revision)

GRADE-1 & 2

8800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials)	-	2225	DENSITY & MFI
5.2(Black Compound)	-	1625	CARBON BLACK CONTENT & CARBON BLACK DISPERSION
6.1.1(Appearance)	-	300	INCLUDES: APPEARANCE, FILM & ODOUR
6.1.2(Film Form)	-	0	-
6.1.3(Odour )	-	0	-
6.1.4(Density)	-	500	-
6.1.5(Melt Flow Rate)	-	1100	-
6.1.6(Black Film)	-	1625	CARBON BLACK CONTENT & CARBON BLACK DISPERSION
6.2.1, Table 1(Tolerance, Percent Grade 1 and 2)	-	250	-
6.2.2, Table 2(Tolerance, Percent Grade 1 and 2)	-	250	-
6.3, Table 3(Tolerance, Percent Grade 1 and 2)	-	600	-
6.4.1(Tensile Strength at Break)	-	1100	-
6.4.2(Elongation at Break)	-	1100	-
6.4.3(Impact Resistance (Falling Dart))	-	850	-

-
-

11984

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

DIA UPTO 32

12612 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	1050	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	-
4.1.c.ii (Toluene extract - Annex A)	-	1100	-
4.1.c.iii (Volatile matter - Annex B )	-	700	-
4.1.c.i (Density)	-	1125	-
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	-
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	150	-
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	100	-
6.1(Visual Appearance)	-	300	-
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	1000	-
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	3000	-
7.2(Reversion Test)	-	1000	-
7.3(Tensile Test)	-	675	-
7.3(Elongation at Break)	-	675	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	-

-
-

11985

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

VERTICAL & LOFT TANK FULL RANGE

13850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Density)	-	500	-
4.2.2(MFI)	-	1100	-
4.2.3(Carbon Black Content )	-	925	-
4.2.3(Carbon Dispersion Test)	-	700	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1800	Dimensions as per Cl. No: 5.1, 5.2, 5.3 & 5.4 (Cylindrical & Loft) Includes: Capacity: 500/- Overall Dia/Length/Width: 250/-Each Overall Height: 250/- ID of Man-hole: 250/- Min Weight without lid: 500/- Visual: 300/-
5.4(Wall Thickness)	-	250	Wall Thickness Above Effective Height (250/-) Wall Thickness Below Effective Height (250/-) Wall Thickness of outer layer of Tank (250/-)
6.1(Finish)	-	300	Visual
7.1.1(Resistance to Deformation)	-	700	-
7.2(Resistance to Impact)	-	1100	-
7.3(Test for Top Load Resistance)	-	900	-
7.4(Tensile Strength)	-	1350	For Tensile Strength: 1100/- Specimen Preparation: 250/-
7.5(Flexural Modulus)	-	1600	For Flexural Strength: 1100/- Specimen Preparation: 500/-
7.6(overall Migration)	-	2200	For Overall Migration : 1700/- Specimen Preparation/Conditioning: 500/-
9.1(Man-Hole and Hand-Hole Lids)	-	2975.00	ForMaterial Identification: 1050/- Visual: 300/- Carbon Black Content: 925/- Carbon Black Dispersion: 700/-
9.2(Man-Hole and Hand-Hole Lids)	-	200	For Lid Lock Up (Visual)
9.2.1(Man-Hole and Hand-Hole Lids)	-	200	For Lid Clearance
5.2 Table 2 (7)(Minimum Wall Thickness)	-	250	For Wall Thickness in Tank
9.1(Lid Thickness)	-	250	For Lid Thickness

-
-

11986

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

PE63, PE80 & PE100 DN UPTO 315MM

41625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Density)	-	1125	For Density: 500/- Specimen preparation: 625/-
5.2(MFI @ 1900C/5.0 Kg)	-	1100	-
5.2(Volatile matter Content)	-	700	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	2200	-
6.2.1(6.1.1 Identification Stripes)	-	250	-
6.2(Colour)	-	250	Visual
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	500	Dimension Includes: Mean Outside Dia ovality Wall Thickness
7.4.1.2(Ovality)	-	0	-
Clause 7.1(Visual Apperance)	-	300	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	Hydraulic Characteristics: 100 hrs/27°C (4000/-) 48 hrs/80°C (1600/-) 165 hrs/80°C (4800/-) 1000 hrs/80°C (11000/-)
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	48 hrs/80°C (1600/-) for Joint Pipe
8.2(Longitudinal Reversion Test)	-	900	For Reversion: 700/- Specimen preparation: 200/-
Clause 8.3(Carbon Black content)	-	925	-
Clause 8.3(Carbon Black Dispersion)	-	700	-
8.4( Melt Flow Rate)	-	1100	-
8.5 (Oxidation Induction Time)	-	2200	-
8.6(Overall migration)	-	2000	For Overall Migration : 1700/- Specimen preparation: 300/-
8.7(Density)	-	500	-
8.8(Tensile Strength for Butt-fusion)	-	1600	For Tensile test : 1100/- Specimen preparation: 500/-
8.9 table-6(Elongation at Break)	-	1600	For Tensile at yield & Elongation test : 1100/- Specimen preparation: 500/-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	0	-
8.10(Slow Crack Growth Rate)	-	6000	For Slow Crack growth test : 5500/- Specimen preparation: 500/- For 500hrs./80°C
7.2(Length)	-	300	-
7.3(Coiling)	-	300	-

-
-

11987

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

TYPE-I, II, III & IV

14606 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	300	Includes" Appearance. Film Form, Odour
5.1.2(Film Form)	-	0	-
5.1.3(Odour)	-	0	-
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	-
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	-
5.1.6a(Carbon Black Content, Annex-A)	-	925	Carbon black content (optional) In Black Film
5.1.6b(Ash Content, Annex-A)	-	950	In Black Film
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	In Black Film
5.2.2(Tolerance on Thickness, Annex-A)	-	250	-
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1350	FOR TABLE 1, 2 & 3 For Tensile & Elongation: 1100/- Specimen Preparation: 250/-
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1350	FOR TABLE 1 , 2 & 3 For Tensile & Elongation: 1100/- Specimen Preparation: 250/-
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300	-
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	0	-
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	0	-
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000	-
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1000	IN Case of Type-IV Film Tear Test Charges will be: 1500/- Specimen Preparation: 500/- (Each)
6.1, Table 1(Tear resistence. B) Transverse direction )	-	1000	IN Case of Type-IV Film Tear Test Charges will be: 1500/- Specimen Preparation: 500/- (Each)
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1350	FOR TABLE 1 , 2 & 3 For Tensile & Elongation: 1100/- Specimen Preparation: 250/-
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1350	FOR TABLE 1 , 2 & 3 For Tensile & Elongation: 1100/- Specimen Preparation: 250/-
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2700	FOR TABLE 1 , 2 & 3 For Tensile & Elongation: 1100/- Specimen Preparation: 250/-
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2700	FOR TABLE 1 , 2 & 3 For Tensile & Elongation: 1100/- Specimen Preparation: 250/-
9.1, Table 4(Puncture resistance , Annex C)	-	1350	For Puncture test: 1100/- Specimen Preparation: 250/-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	1350	For Tensile : 1100/- Specimen Preparation: 250/-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	1350	For Tensile : 1100/- Specimen Preparation: 250/-
Clause 5.2.3(Tolerance on Width)	-	250	-
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2700	AS PER TABLE: 04 CL. NO:9.1 For Break Strenth & Break Elongation : 2200/- (WD) Specimen Preparation: 500/-
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	2700	AS PER TABLE: 04 CL. NO:9.1 For Break Strenth & Break Elongation : 2200/- (WD) Specimen Preparation: 500/-
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	AS PER TABLE: 04 CL. NO:9.1 For Break Strenth & Break Elongation : 2200/- (WD) Specimen Preparation: 500/-
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	AS PER TABLE: 04 CL. NO:9.1 For Break Strenth & Break Elongation : 2200/- (WD) Specimen Preparation: 500/-
5.2.1.1(Nominal Thickness)	-	250	-
5.2.1.2(Nominal width)	-	250	-

-
-

11988

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 13801 (2013)

Chequered Cement Concrete Tiles -

All

7350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	600	Complete Testing Charges-7350 20% discount to BIS GSTIN Applicable as per govt rule
Cl 12.1(Concavity & Convexity )	-	750	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	750	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	750	-
Cl 12.4(Water absorption)	-	1000	-
Cl 12.5(Wet transverse strength)	-	1000	-
Cl 12.6(Resistance to wear)	-	2000	-
Cl 11(Finish)	-	500	GSTIN applicable as per govt rule 20% discount to BIS
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	0	-
Cl 12.1(Concavity & Convexity )	-	0	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	0	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	0	-
Cl 12.4(Water absorption)	-	0	-
Cl 12.5(Wet transverse strength)	-	0	-
Cl 12.6(Resistance to wear)	-	0	-
Cl 11(Finish)	-	0	-
8.3(Thickness of wearing layer)	-	0	-

12 Sep, 2028

-
-

11989

Winwall Technology India Private Limited,Thiruvallur

6171906

IS 17346 (2020)

Insulating Glazing Unit ” Specification

Insulating Glazing Unit

275752 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.2(Thickness test)	Inert gas level test (Optional test) as per Cl.5.2.3	5124	Testing Charges for Thickness Test
5.1.1(Dimension and Squarenes test)	Inert gas level test (Optional test) as per Cl.5.2.3	5011	Combined Testing Charges for Dimension and Squareness
7.4.1(Dew /frost point measurement)	Inert gas level test (Optional test) as per Cl.5.2.3	9998	-
5.2.2(Climate test)	Inert gas level test (Optional test) as per Cl.5.2.3	160000	-
5.1.3(Displacement test)	Inert gas level test (Optional test) as per Cl.5.2.3	5149	-
5.1.4(Sealant protrusion test)	Inert gas level test (Optional test) as per Cl.5.2.3	5149	-
5.1.5(Bite size test)	Inert gas level test (Optional test) as per Cl.5.2.3	5149	-
5.2.4(Edge strength test)	Inert gas level test (Optional test) as per Cl.5.2.3	80172	-

-
Exclusion: Inert Gas Level test as per Cl. 5.2.3 (Optional Test)

11990

Winwall Technology India Private Limited,Thiruvallur

6171906

IS 16982 (2018)

Heat strengthened glass - Specification

Heat Strengthened Glass

82765 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Thickness test)	-	5214	Testing Charges for Thickness Measurement
4.4(Dimension and Squarenes test)	-	5011	Combined Testing Charges for Dimension and Squareness
4.7(Overall Bow)	-	6423	Combined Testing Charges for Flatness test
4.7(measurement of wave and roller wave)	-	6423	Combined Testing Charges for Flatness test
4.7(Edge lift test)	-	6423	Combined Testing Charges for Flatness test
4.7(Local distortion test)	-	6423	Combined Testing Charges for Flatness test
4.5(Fragmentation test)	-	6271	Testing Charges for Fragmentation Test
4.6(Four point bending test)	-	9998	Testing Charges for Four point Bending Test
4.5(Surface compression)	-	6423	Testing Charges for Surface Compression Test

-
-

11991

BIS, Northern Regional Laboratory (NRL)

None

IS/ISO 3183 (2012)

Petroleum and Natural Gas Industries â€” Steel Pipe for Pipeline Transportation Systems ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
Excluding HST, Impact test, Microalloying Elements

11992

Amit Test and Calibration Centre (8172006)

8172006

IS 15652 (2006)

Insulating mats for electrical purposes - Specification

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	1000	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	1000	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	1000	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	1000	-
9(Marking (As per Cl.9.1 of IS 15652 : 2006))	-	1000	-
9(Marking (As per Cl.9.2 of IS 15652 : 2006))	-	1000	-
10.a)(Packing)	-	1000	-
10.b)(Packing)	-	1000	-
10.c)(Packing)	-	1000	-
4(Classification and Designation (As per Cl.4.1 and Table-1 of IS 15652 : 2006))	-	1000	-
4(Classification and Designation (As per Cl.4.1 and Table-1 of IS 15652 : 2006))	-	1000	-
4(Classification and Designation (As per Cl.4.1 and Table-1 of IS 15652 : 2006))	-	1000	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	1000	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	1000	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	1000	-
4(Classification and Designation (As per Cl.4.2 of IS 15652 : 2006))	-	1000	-
5(Composition (As per Cl. 5.1 of IS 15652 : 2006))	-	1000	-
5(Composition (As per Cl. 5.2 of IS 15652 : 2006))	-	1000	-
6(Shape Requirements and Dimension (As per Cl.6.1 & 6.2 of IS 15652 : 2006))	-	2000	-
6(Shape Requirements and Dimension (As per Cl.6.1 & 6.2 of IS 15652 : 2006))	-	2000	-
6(Thickness [mm] (As per Cl. 6.3 and Table-2 of IS 15652 : 2006))	-	2000	-
6(Thickness [mm] (As per Cl. 6.3 and Table-2 of IS 15652 : 2006))	-	2000	-
6(Thickness [mm] (As per Cl. 6.3 and Table-2 of IS 15652 : 2006))	-	2000	-
6(Colour (As per Cl. 6.4 of IS 15652 : 2006))	-	1000	-
7(Workmanship & Finish (As per Cl. 7.1 of IS 15652 : 2006))	-	1000	-
8(Physical properties (As per Cl.8.1 and Table - 3 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.1 and Table - 3 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.3 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.3 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	5000	-
8(Physical properties (As per Cl.8.5 of IS 15652 : 2006))	-	5000	-
8(Di-electric Properties (As per Cl.8.2.1 and C-3.1 of IS 15652 : 2006))	-	5000	-
8(Di-electric Properties (As per Cl.8.2.2 and C-3.2 of IS 15652 : 2006))	-	5000	-
8(Di-electric Properties (As per Cl.8.2.3 and C-3.3 of IS 15652 : 2006))	-	5000	-
8(Di-electric Properties (As per Cl.8.2.3 and Table-4 of IS 15652 : 2006))	-	5000	-
8(Di-electric Properties (As per Cl.8.2.3 and Table-4 of IS 15652 : 2006))	-	5000	-
8(Di-electric Properties (Cl.8.2), A.C. Proof Voltage (Cl.8.2.4), C-3.4 and Table-5 of IS 15652 : 2006))	-	5000	-
8(A.C. Proof Voltage (Cl.8.2.4), C-3.4 and Table-5 of IS 15652 : 2006))	-	5000	-
8(A.C. Proof Voltage (Cl.8.2.4), C-3.4 and Table-5 of IS 15652 : 2006))	-	5000	-
8(Thermal Properties (Cl..8.4))	-	5000	-
8(Thermal Properties (Cl..8.4))	-	5000	-
8(Extreme Low Temperature (Cl.8.6))	-	5000	-

16 Apr, 2029

-
-

11993

TECHVISION TESTING LAB PRIVATE LIMITED

9173226

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	1000	-
1.6(Power interface .)	-	2000	-
1.7(Markings and instructions)	-	300	-
2.1(Protection from electric shock and energy hazards)	-	1000	-
2.2(SELV circuits)	-	1000	-
2.3(TNV circuits)	-	1000	-
2.4(Limited current circuits)	-	1000	-
2.5(Limited power sources .)	-	1000	-
2.9(Electrical insulation)	-	1000	-
2.10(Clearances, creepage distances and distances through insulation)	-	2000	-
3.1(General)	-	500	-
3.2(Connection to a mains supply)	-	500	-
3.3(Wiring terminals for connection of external conductors)	-	500	-
3.4(Disconnection from the mains supply)	-	500	-
3.5(Interconnection of equipment)	-	500	-
4.1(Stability)	-	500	-
4.2(Mechanical strength)	-	1000	-
4.3(Design and construction)	-	1000	-
4.4(Protection against hazardous moving parts)	-	500	-
4.5(Thermal requirements)	-	2000	-
4.6(Openings in enclosures)	-	500	-
4.7(Resistance to fire)	-	1500	-
5.1(Touch current and protective conductor curren)	-	1000	-
5.2(Electric strength)	-	500	-
5.3(Abnormal operating and fault conditions)	-	500	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	200	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	200	-
6.3(Protection of the telecommunication wiring system from overheating)	-	200	-
7.1(General)	-	200	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	200	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	200	-
7.4(Insulation between primary circuits and cable distribution systems)	-	200	-
2.8.2/2.8.5(Interlock switches)	-	500	-
2.8.7(Switches and Relay)	-	500	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	500	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	500	-
2.10.5.4(Opto-coupler)	-	200	-
2.10.5.6(Thin sheet materials)	-	500	-
2.10.5.11(SMPS Transformer and Inductor)	-	500	-
2.10.12(Enclosed and sealed parts)	-	500	-
2.10.5.13(Winding wire)	-	500	-
3.1.4(Internal wire)	-	500	-
2.10.5.14(Additional insulation in wound components)	-	500	-
2.10.6(PCB material)	-	500	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	500	-
2.10.8.4(Abrasion resistance test)	-	500	-
2.10.9(Thermal Cycling)	-	500	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	500	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	500	-
3.2.4(Appliance inlet /connector)	-	200	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	200	-
4.2.8(Cathode Ray Tubes)	-	200	-
4.3.8(Batteries)	-	500	-
4.3.10(Dust, powders, liquids and gases)	-	500	-
4.3.11(Containers for liquids or gases)	-	500	-
4.3.12(Flammable liquids)	-	500	-
4.3.13.2(Ionizing radiation)	-	500	-
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	500	-
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	500	-
4.3.13.5(LED, laser class)	-	500	-
Annex A3(Hot flaming oil test)	-	0	-
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	500	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	500	-
Annex K(Thermal Control)	-	500	-
Annex Q(Voltage Dependent Resistors)	-	500	-
Annex B(Motor tests under abnormal conditions)	-	500	-
Annex C(Transformers)	-	500	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	500	-
Annex EE(Household and home/ office document/ media shredders)	-	500	-
4.6.2(Bottoms of fire enclosures)	-	500	-
2.6(Provisions for earthing and bonding)	-	500	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	500	-
2.8(Safety interlocks)	-	500	-

16 Jul, 2029

-
Exclusion: Cl. 2.8.7 (Switches and Relay), Cl. 4.2.8 (Cathode Ray Tubes), Cl. 4.3.13.2 (Ionizing radiation), Cl. 4.3.13.3/ Annex Y (Effect of UV radiation on material/Ultraviolet conditioning test), Cl. 4.3.13.4 (Human exposure to ultraviolet (UV) radiation), Cl. 4.3.13.5 (LED, laser class), Annex CC (Evaluation of integrated circuit (IC) current limiters)

11994

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	600	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	600	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.4.2(a)( Aggregates Impact Value)	-	600	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.4.2(b)( Aggregates Impact Value)	-	600	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.4.3(a)( Aggregate Abrasion Value)	-	400	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.4.3(b)( Aggregate Abrasion Value)	-	400	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	2000	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	500	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
Clause 5.6(Dissolved Silica)	-	250	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
Clause 5.6(Reduction in Alkalinity)	-	250	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	2000	FOR COARSE AGGREGATE 12500/- & FINE AGGREGATE 9000/-

-
-

11995

ADARSH SCIENTIFIC RESEARCH CENTER AND TESTING LABORATORY PVT. LTD., PANVEL

7175806

IS 10500 (2012)

Drinking water - Specification (Second Revision)

Drinking Water

15000 View breakup
+ GST

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4. SL No.i)of Table I(Colour)	-	100	-
4.SL No.ii) of Table I(Odour)	-	100	-
4.SL No.iii)of Table I(pH)	-	200	-
4.SL No.v)of Table I(Turbidity, NTU, Max)	-	200	-
4.SL No.vi)of Table I(Total dissolved solids, mg/l, max)	-	500	-
table 2 sl.no 1( Aluminium (as Al), mg/l, Max)	-	250	-
table 2 sl.no 2(Ammonia (as total ammonia-N), mg/l, Max)	-	250	-
table 2 sl.no 3(Anionic detergents (as MBAS), mg/l, Max)	-	200	-
table 2 sl.no 4(Barium (as Ba), mg/l, Max)	-	250	-
table 2 sl.no 5(Boron (as B), mg/l, Max)	-	200	-
table 2 sl.no 6(Calcium (as Ca), mg/l, Max)	-	200	-
4, Table 2, Sr. no. vii(Chloramines)	-	250	-
4, Table 2, Sr.no. viii(Chloride)	-	200	-
table 2 sl.no 9(Copper (as Cu), mg/l, Max)	-	250	-
table 2 sl.no 10( Fluoride (as F) mg/l, Max)	-	200	-
table 2 sl.no 11(Free residual chlorine, mg/l, Min)	-	200	-
table 2 sl.no 12(Iron (as Fe), mg/l, Max)	-	250	-
table 2 sl.no 13(Magnesium (as Mg), mg/l, Max)	-	300	-
table 2 sl.no 14(Manganese (as Mn), mg/l, Max)	-	300	-
table 2 sl.no 15(Mineral oil, mg/l, Max)	-	300	-
table 2 sl.no 16(Nitrate (as NO3), mg/l, Max)	-	150	-
table 2 sl.no 17(Phenolic compounds (as C6H5OH), mg/l, Max)	-	300	-
table 2 sl.no 18(Selenium (as Se), mg/l, Ma)	-	200	-
table 2 sl.no 19(Silver (as Ag), mg/l, Max)	-	300	-
table 2 sl.no 20(Sulphate (as SO4) mg/l, Max)	-	350	-
table 2 sl.no 21(Sulphide (as H2S), mg/l, Max)	-	250	-
table 2 sl.no 22(Total alkalinity as calcium carbonate, mg/l, Max)	-	300	-
table 2 sl.no 23(Total hardness (as CaCO3 mg/l, Max)	-	250	-
table 2 sl.no 24(Zinc (as Zn), mg/l, Max)	-	200	-
TABLE 3 sl no 1(Cadmium (as Cd), mg/l, Max)	-	200	-
TABLE 3 sl no 2(Cyanide (as CN), mg/l, Max)	-	200	-
TABLE 3 sl no 3(Lead (as Pb), mg/l, Max)	-	250	-
TABLE 3 sl no 4(Mercury (as Hg), mg/l, Max)	-	250	-
TABLE 3 sl no 5( Molybdenum (as Mo), mg/l, Max)	-	250	-
TABLE 3 sl no 6(Nickel (as Ni), mg/l, Max)	-	250	-
TABLE 3 sl no 8(Polychlorinated biphenyls, mg/l,)	-	250	-
TABLE 3 sl no 9(Polynuclear aromatic hydro-carbons (as PAH), mg/l, Max)	-	200	-
TABLE 3 sl no 10(Total arsenic (as As), mg/l, Max)	-	200	-
TABLE 3 sl no 11(Total chromium (as Cr), mg/l, Max)	-	200	-
TABLE 3 sl no 12(Bromoform, mg/l, Max)	-	200	-
TABLE 3 sl no 13(Dibromochloromethane,)	-	250	-
Table 3 (Clause 4)xii) Trihalomethanes: (b)(Bromodichloromethane)	-	250	-
TABLE 3 sl no 15(Chloroform, mg/l, Max)	-	300	-
TABLE 5 sl no 1(Alachlor)	-	300	-
TABLE 5 sl no 2(Atrazine)	-	200	-
Table 5(Aldrin and Dieldrin )	-	400	-
TABLE 5 sl no 4( Alpha HCH)	-	300	-
TABLE 5 sl no 5(Beta HCH)	-	250	-
TABLE 5 sl no 6(Butachlor)	-	200	-
TABLE 5 sl no 7(Chlorpyriphos)	-	300	-
TABLE 5 sl no 8(Delta HCH)	-	200	-
TABLE 5 sl no 9(2,4- Dichlorophenoxyacetic acid)	-	150	-
TABLE 5 sl no 10( DDT (o, p and p, p – Isomers of DDT, DDE and DDD))	-	200	-
TABLE 5 sl no 11(Endosulfan (alpha, beta, and sulphate))	-	600	-
TABLE 5 sl no 12( Ethion)	-	200	-
TABLE 5 sl no 13(Gamma — HCH (Lindane))	-	200	-
TABLE 5 sl no 14( Isoproturon)	-	200	-
TABLE 5 sl no 15(Malathion)	-	200	-
TABLE 5 sl no 16(Methyl parathion)	-	250	-
TABLE 5 sl no 17(Monocrotophos)	-	200	-
TABLE 5 sl no 18(Phorate)	-	100	-
TABLE 6 sl no 1(All water intended for drinking: a) E. coli or thermotolerant coliform bacteri)	-	500	-
TABLE 6 sl no 3(b) Total coliform bacteria)	-	200	-
Table 3, x)(Uranium)	-	200	-
Table 1 clause(iv)(Taste)	-	100	-

14 Jan, 2027

-
Exclusion: MS2 phage (Cl.4.2.7), Alpha Emitters (Cl.4, Table 4, I, a), Beta Emitters (4, table 4, I, b), Giardia (Cl.4.3.9), Cryptosporidium (Cl.4.3.8)

11996

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

9500 View breakup
-

Clause No.	Exclusion	Remark
3.2.2, Table 2(Dimension of 11 1/4° bends for Elastomeric sealing ring joint)	-	Combined Testing Charges for Dimensions are Rs. 2000/- mentioned below.
3.2.2, Table 1(Dimension of 11 1/4° bends)	-	Combined Testing Charges for Dimensions are Rs. 2000/- mentioned below.
3.2.3(Socket, Measurement)	-	Combined Testing Charges for Dimensions are Rs. 2000/- mentioned below.

31 Dec, 2026

-
Included w.e.f. 13.10.2023.

11997

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 10124 : Part 12 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 12 specific requirements for 22½ degree bends (Second Revision)

9500 View breakup
-

Clause No.	Exclusion	Remark
3.2.2, Table 1(Dimensions of 22 ½ deg Bends)	-	Combined Testing Charges for Dimensions are Rs. 2000/- mentioned below.
3.2.2, Table 2(Dimensions of 22 ½ deg Bend for Elastomeric Sealing Ring Joint)	-	Combined Testing Charges for Dimensions are Rs. 2000/- mentioned below.
3.2.3(Socket, measurements)	-	Combined Testing Charges for Dimensions are Rs. 2000/- mentioned below.

31 Dec, 2026

-
Included w.e.f. 13.10.2023.

11998

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.2, Table 1(Dimensions of 30 deg Bends)	-	0		Combined Testing Charges for Dimensions are Rs. 2000/- mentioned below.

31 Dec, 2026

-
Included w.e.f. 13.10.2023.

11999

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

40 MM TO 160 MM

14650.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Colour of fittings)	-	500.00	-
7.1,Table 1(Wall thickness)	-	500.00	-
8(Sealing Rings)	-	500.00	-
10(Workmanship)	-	500.00	-
11.1(Solvent cement type or Rubber ring type)	-	500.00	-
12.1(Visual appearance)	-	500.00	-
12.2(Stress relief test)	-	700.00	-
12.3(Vicat softening tempewrature)	-	1100.00	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500.00	Testing Charge- 2000.00 SPECIMEN CONDIONING CHARGE- 500.00
Cl.15, Annex B(Sulphated Ash Content)	-	1200.00	-
16.1(Impact test)	-	1100.00	-
17(Watet tightness of joint)	-	850.00	-
12.4(Effect on water test)	-	3000.00	-
7.2 ,Table 2&3(Socket Dimensions)	-	500.00	All Dimension have single Charge.
7.3(Dimensions of waste trap(Nahani Trap)	-	0.00	All Dimension have single Charge.
7.4(Chamfer)	-	0.00	All Dimension have single Charge.
11.4,Table 5(Vent cowl)	-	0.00	All Dimension have single Charge.
11.5,Table 6(Pipe Clips)	-	0.00	All Dimension have single Charge.
19(Marking)	-	0.00	-
3(Type of Fitting)	-	0.00	-
4(Size Designation)	-	0.00	-
11(Design requirements)	-	0.00	-
11.2(Socket and spigot configeration)	-	0.00	-
12(Physical test requirements)	-	0.00	-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	0.00	TEST CHARGES FOR ABOVE PRAMETER ALEADY TAKEN.
16(Mechanical Properties)	-	0.00	-
11.3(Access Openings)	-	0.00	TEST CHARGES FOR ABOVE PRAMETER ALEADY TAKEN.
Table 4(Dimension of Access Openings)	-	0.00	TEST CHARGES FOR ABOVE PRAMETER ALEADY TAKEN.

24 Apr, 2027

-
-

12000

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 15532 (2004)

Plastics crates for fruits and vegetables - Specification

15200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Material)	-	6300.0	1. MATERIAL IDENTIFICATION - 2000.00 2. COLOUR- 500.00 3. PRESENCE OF UV STABLIZER - 2000.00 4. MFI- 1100.00 5. DENSITY - 700.00
3.3(Shape, Dimensions and Design)	-	500.00	-
3.4(Mass)	-	500.00	-
3.5(Appearance and Surface Finish)	-	500.00	-
3.6(Dimensional Stability)	-	700.00	-
3.7(Confluence Line Strength)	-	1100.00	-
3.8.1(Compressive Strength (Resistance to Applied Load))	-	1100.00	-
3.8.2(Resistance to Drop)	-	1100.00	-
3.9(Resistance to Environmental Stress Cracking)	-	1200.00	-
3.10.1(Suspension Test)	-	1100.00	-
3.10.2(Free-Fall Test)	-	1100.00	-
3, 3.1(Requirements)	-	0.00	-
3.1(Crates)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.2(Material)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.3(Shape, Dimensions and Design)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.4(Mass)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.5(Appearance and Surface Finish)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.6(Dimensional Stability)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.7(Confluence line Strength)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.8(Mechanical Strength)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.9(Resistance to Environmental Stress Cracking)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
3.10(Handle Test)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
4(Packing and Marking)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found