BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15361 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

12001

ATCC TEST LABS LLP

8172626

IS 2994 (1992)

Electric stoves - Specification (Second Revision)

32500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(Safety Requirements)	-	24000	-
10(Endurance Test)	-	5000	-
11(Finish)	-	1000	-
12(Thermal Efficiency)	-	2000	-
8(Marking)	-	500	-
7(Classification)	-	0	-
6(Rating)	-	0	-

15 Jun, 2026

-
Exclusion - EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Test of synthetic rubber and ceramic material (Cl.22.32), Cl.22.46 Software Cl.24 Components.

12002

ATCC TEST LABS LLP

8172626

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	500	-
6(Marking)	-	1000	-
7(Construction)	-	7000	-
8(Creepage Distance and Clearances)	-	2000	-
9(Provision for earthing)	-	2000	-
10(Terminals)	-	1000	-
11(External & Internal Wiring)	-	1500	-
12(Protection against electric shock)	-	2000	-
13(Endurance Tests and Thermal Tests)	-	10000	-
14(Resistance to Dust and Moisture)	-	5000	-
15(Insulation Resistance and Electric Strength)	-	1000	-
16(Resistance to Heat , fire and tracking)	-	5000	-
17(Photometric Test)	-	12000	-

15 Jun, 2026

-
Exclusion - 1. Torque above 35 Nm for Cl.4.12.1 2. UV Radiation (Cl.4.24 & Annex P)

12003

ATCC TEST LABS LLP

8172626

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	500	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	2000	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	2000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	2000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	500	-
Cl.18 of IS 368:2014(Endurance)	-	3000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	2000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	500	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	2000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.24 of IS 302-2-201: 2008(Component)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	500	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	500	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	500	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	2000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	500	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	0	-

15 Jun, 2026

-
-

12004

ATCC TEST LABS LLP

8172626

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	100	-
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	500	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	500	-
10.0(Measurement of Heating up time)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1500	-
12.0(Measurement of Tempearture Distribution)	-	2000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	-
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	500	-
16.0(Measurement of Thermostatic staibility)	-	500	-
6(Measurement of Thermostatic staibility)	-	0	-
17(Measurement of Thermostatic staibility)	-	500	-

15 Jun, 2026

-
-

12005

ATCC TEST LABS LLP

8172626

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	500	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	500	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	500	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	500	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.24 of IS 302-2-201: 2008(Component)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	500	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	500	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	500	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	500	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	500	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	500	-

15 Jun, 2026

-
Exclusion - EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Test of synthetic rubber and ceramic material (Cl.22.32), Cl.22.46 Software Cl.24 Components.

12006

ATCC TEST LABS LLP

8172626

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. 6 IS 4159:2021"(Classification)	-	0	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	500	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	1000	-
"Cl. 11 IS 4159:2021"(Heating)	-	2000	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	500	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	1000	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	2000	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	500	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	0	-
"Cl. 18 IS 4159:2021"(Endurance)	-	3000	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	1500	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	500	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	500	-
"Cl. 22 IS 4159:2021"(Construction)	-	1000	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	500	-
"Cl. 24 IS 4159:2021"(Components)	-	500	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	500	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	500	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	500	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	500	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	1000	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	500	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	0	-

15 Jun, 2026

-
Exclusion - EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Test of synthetic rubber and ceramic material (Cl.22.32), Cl.22.46 Software Cl.24 Components.

12007

ATCC TEST LABS LLP

8172626

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

27000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	0	-
7.1(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	0	-
7.4(Marking- IS 302-1)	-	0	-
7.6(Marking- IS 302-1)	-	0	-
7.7(Marking- IS 302-1)	-	0	-
7.8(Marking- IS 302-1)	-	0	-
7.11(Marking- IS 302-1)	-	0	-
7.12(Marking- IS 302-1)	-	0	-
7.13(Marking- IS 302-1)	-	0	-
7.14(Marking- IS 302-1)	-	0	-
7.15(Marking- IS 302-1)	-	0	-
7.101(Marking)	-	0	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	2000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	0	-
15.2(Moisture Resistance, IS 302-1)	-	0	-
15.3(Moisture Resistance, IS 302-1)	-	2000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	-
19.4(Abnormal Operation, IS 302-1)	-	0	-
19.5(Abnormal Operation, IS 302-1)	-	0	-
19.1(Abnormal Operation)	-	2000	-
19.101(Abnormal Operation)	-	0	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	-
21.101(Mechanical Strength, IS 302-2-3)	-	1000	-
22(Construction, IS 302-1)	-	500	-
22.101(Construction)	-	500	-
22.102(Construction)	-	500	-
22.103(Construction)	-	500	-
22.104(Construction)	-	500	-
22.105(Construction)	-	500	-
22.106(Construction)	-	500	-
22.107(Construction)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	0	-
23.3(Internal Wiring, IS 302-1)	-	0	-
23.4(Internal Wiring, IS 302-1)	-	0	-
23.5(Internal Wiring, IS 302-1)	-	0	-
23.6(Internal Wiring, IS 302-1)	-	0	-
23.7(Internal Wiring, IS 302-1)	-	0	-
23.8(Internal Wiring, IS 302-1)	-	0	-
23.9(Internal Wiring, IS 302-1)	-	0	-
23.10(Internal Wiring, IS 302-1)	-	0	-
24.1(Components, IS 302-1)	-	500	-
24.2(Components, IS 302-1)	-	0	-
24.4(Components, IS 302-1)	-	0	-
24.5(Components, IS 302-1)	-	0	-
24.6(Components, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	-
26(Terminals for External Conductors, IS 302-1)	-	2000	-
27.1(Provision for Earthing, IS 302-1)	-	500	-
27.2(Provision for Earthing, IS 302-1)	-	0	-
27.3(Provision for Earthing, IS 302-1)	-	0	-
27.4(Provision for Earthing, IS 302-1)	-	0	-
27.5(Provision for Earthing, IS 302-1)	-	0	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	500	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-

15 Jun, 2026

-
Exclusion - EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Test of synthetic rubber and ceramic material (Cl.22.32), Cl.22.46 Software Cl.24 Components.

12008

ATCC TEST LABS LLP

8172626

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	1000	-
10(POWER INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	3000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	-
14(TRANSIENT OVERVOLTAGES)	-	2000	-
15(MOISTURE RESISTANCE)	-	5000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
19(ABNORMAL OPERATION)	-	5000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	5000	-
23(INTERNAL WIRING)	-	1000	-
24(COMPONENTS)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	5000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
22.16(Automatic cord reel)	-	0	-
22.32(Oxygen bomb for rubber material)	-	0	-
22.47(Water pressure inlet)	-	0	-
22.3(Flexing test)	-	0	-

15 Jun, 2026

-
Exclusion - EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Test of synthetic rubber and ceramic material (Cl.22.32), Cl.22.46 Software Cl.24 Components.

12009

ATCC TEST LABS LLP

8172626

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

52000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	-
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	1000	-
10(POWER INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	3000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	-
14(IMPULSE VOLTAGE TEST)	-	2000	-
15(HUMIDITY TREATMENT TEST)	-	5000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
18(ENDURANCE)	-	5000	-
19(ABNORMAL OPERATION)	-	5000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	5000	-
23(INTERNAL WIRING)	-	1000	-
24(COMPONENTS)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	5000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2000	-

15 Jun, 2026

-
Exclusion - EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Test of synthetic rubber and ceramic material (Cl.22.32), Cl.22.46 Software Cl.24 Components. Annex BB microwave ovens intended to be used on board ship annex CC environmental testing.

12010

ATCC TEST LABS LLP

8172626

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	500	-
6.0(Marking)	-	1000	-
7.0(Construction)	-	7000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	1000	-
11.0(External & Internal Wiring)	-	1500	-
12.0(Protection against electric shock)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	12000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	1000	-
16.0(Resistance to Heat , fire and tracking)	-	5000	-
17.0(Photometric Test)	-	5000	-

15 Jun, 2026

-
Exclusion - 1. Torque above 35 Nm for Cl.4.12.1 2. UV Radiation (Cl.4.24 & Annex P)

12011

BIS, Northern Regional Laboratory (NRL)

None

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

Mineral filled sheathed heating element

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
"Cl. 6 IS 4159:2021" (Classification)	-
"Cl. 8 IS 4159:2021" (Protection against access to live parts)	-
"Cl. 10 IS 4159:2021" (Power Input and Current)	-
"Cl. 11 IS 4159:2021" (Heating)	-
"Cl. 13 IS 4159:2021" (Leakage Current & Electrical Strength at Operating Temperature)	-
"Cl. 15 IS 4159:2021" (Moisture Resistance)	-
"Cl. 16 IS 4159:2021" (Leakage Current and Electric strength)	-
"Cl. 18 IS 4159:2021" (Endurance)	-
"Cl. 19 IS 4159:2021" (Abnormal Operation)	-
"Cl. 20 IS 4159:2021" (Stability and mechanical Hazards)	-
"Cl. 21 IS 4159:2021" (Mechanical Strength)	-
"Cl. 22 IS 4159:2021" (Construction)	-
"Cl. 23 IS 4159:2021" (Internal Wiring)	-
"Cl. 24 IS 4159:2021" (Components)	-
"Cl. 25 IS 4159:2021" (Supply Connections and External Flexible Cables and Cords)	-
"Cl. 26 IS 4159:2021" (Terminal For External Conductors)	-
"Cl. 27 IS 4159:2021" (Provision For Earthing)	-
"Cl. 28 IS 4159:2021" (Screws and Connections)	-
"Cl. 29 IS 4159:2021" (Creepage Distances, Clearances And Distances Through Insulation)	-
"Cl. 30 IS 4159:2021" (Resistance To Heat, Fire And Tracking)	-
"Cl. 31 IS 4159:2021" (Resistance To Rusting)	-
"Cl. 102 IS 4159:2021" (Leakage and hydrostatic strength (for oil heating elements))	-

-
Excluding water heating element rating above 3 kW and Except oil heaters

12012

ATCC TEST LABS LLP

8172626

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	-
7(Marking and instructions)	-	500	-
8(Protection against live parts)	-	500	-
10(POWER INPUT AND CURRENT)	-	1000	-
11(HEATING)	-	1500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	-
14(TRANSIENT OVERVOLTAGES)	-	1000	-
15(MOISTURE RESISTANCE)	-	2000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	500	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
19(ABNORMAL OPERATION)	-	1500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	1000	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	-
30(RESISTANCE TO HEAT AND FIRE)	-	1500	-
31(RESISTANCE TO RUSTING)	-	500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
22.3(Flexing test)	-	0	-
22.16(Automatic cord reel)	-	0	-

15 Jun, 2026

-
Exclusion - EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Test of synthetic rubber and ceramic material (Cl.22.32), Cl.22.46 Software Cl.24 Components.

12013

ATCC TEST LABS LLP

8172626

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and Instructions)	-	200	-
6.0(Classification)	-	200	-
8.0(Protection against access to live parts)	-	500	-
10.0(Input and Current)	-	500	-
11.0(Heating)	-	500	-
13.0(Leakage Current and electric strength at operating temperature)	-	500	-
14.0(Transient Overvoltage)	-	500	-
15.0(Moisture resistance)	-	200	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	500	-
17.0(Overload Protection of transformer and associated circuit)	-	200	-
19.0(Abnormal Operation)	-	200	-
20.0(Stability and mechanical hazards)	-	100	-
21.0(Mechanical Strength)	-	200	-
22.0(Construction)	-	100	-
23.0(Internal Wiring)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	200	-
26.0(Terminals for external conductors)	-	200	-
27.0(Provision For Earthing)	-	200	-
28.0(Screws and Connections)	-	200	-
29.0(Creepage Distances and Clearances)	-	500	-
30.0(Resistance To Heat and Fire)	-	500	-
31.0(Resistance To Rusting)	-	200	-

15 Jun, 2026

-
Exclusion - EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Test of synthetic rubber and ceramic material (Cl.22.32), Cl.22.46 Software Cl.24 Components.

12014

BIS, Central Laboratory (CL)

None

IS 12817 (2020)

Stainless Steel Butt Hinges - Specification ( Third Revision )

3550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.1.2 (Silicon (Pin) )	-
Clause 4.1.2 (Phosphorus (Pin) )	-
Clause 4.1.2 (Sulphur (Pin) )	-
Clause 4.1.2 (Manganese (Pin) )	-
Clause 4.1.2 (Carbon (Pin) )	-
Clause 4.1.1 (Silicon (Flap) )	-
Clause 4.1.1 (Phosphorus (Flap) )	-
Clause 4.1.1 (Sulphur (Flap) )	-
Clause 4.1.1 (Manganese (Flap) )	-
Clause 4.1.1 (Carbon (Flap) )	-
6.2, Table 1 to 6 (Length , A -IS 12817)	-
6.2, Table 1 to 6 (Breadth, B-IS 12817)	-
6.2, Table 1 to 6 (Thickness of flap, C-IS 12817)	-
6.2, Table 1 to 6 (Dia. of Hinge pin, D-IS 12817 )	-
6.2, Table 1 to 6 (Holes for Screw Number- IS 12817 )	-
7.1 (General - IS 12817 )	-
7.2 (Knuckles - IS 12817 )	-
7.3 (Pins- IS 12817 )	-
7.4 (Screw Holes- IS 12817 )	-
7.4.2 (Position of screw holes - IS 12817 )	-
7.4.2, Fig 1 (The distance of the screw holes from the end of the flap - IS 12817 )	-
8.0 (Finish - IS 12817 )	-
As per Cl.4 (Nitrogen)	-
As per Cl.4 (Aluminium)	-
As per Cl.4 (Chromium)	-
As per Cl.4 (Vanadium)	-
As per Cl.4 (Molybdenum)	-
As per Cl.4 (Niobium)	-
As per Cl.4 (Nickel)	-
As per Cl.4 (Copper)	-
As per Cl.4 (Titanium)	-
As per Cl.4 (Zirconium)	-
As per Cl.4 (Tungsten)	-
As per Cl.4 (Cerium)	-

-
-

12015

ATCC TEST LABS LLP

8172626

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	-
7.0(Marking and instructions)	-	500	-
8.0(Protection against access to live part test)	-	500	-
10.0(Power Input and current test)	-	1000	-
11.0(Heating test)	-	1500	-
13.0(Leakage current and electric strength test)	-	500	-
14.0(Transient voltages)	-	1000	-
15.0(Moisture Resistance)	-	2000	-
16.0(Leakage current and electric strength test)	-	500	-
17.0(Overload protection of transformers test)	-	500	-
19.0(Abnormal Operations)	-	1500	-
20.0(Stability and Mechanical Hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction verification related tests)	-	1000	-
23.0(Internal wiring)	-	500	-
24.0(Components)	-	500	-
25.0(Supply connections and External Flexible Cords)	-	1000	-
26.0(Terminal for External Conductors)	-	500	-
27.0(Provision for Earthing)	-	500	-
28.0(Screws and connections)	-	500	-
29.0(Clearances and Creepage distances and solid insulation)	-	1000	-
30.0(Resistance to heat and fire)	-	1500	-
31.0(Resistance to rusting)	-	500	-
32.0(Radiation, Toxicity and Similar hazards)	-	0	-

15 Jun, 2026

-
Exclusion - EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Test of synthetic rubber and ceramic material (Cl.22.32), Cl.22.46 Software Cl.24 Components.

12016

ATCC TEST LABS LLP

8172626

IS 996 (2009)

Single phase a.c. induction motors for general purpose (Third Revision)

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Marking and Diagram of connenctions)	-	500	-
10(Type of enclosures)	-	500	-
11(Methods of cooling)	-	500	-
9.1(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	0	-
4.1(Rated Voltage)	-	0	-
4.2(Rated Frequency)	-	0	-
4.3(Rated Output)	-	0	-
4.4(Rated Speed)	-	0	-
7(Dimensions (Cl.App.F-4))	-	500	-
9.5(Earthing)	-	0	-
17.3 (a)(No load test at rated voltage and frequency )	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.7(Insulation resistance test)	-	500	-
13.1(High voltage test)	-	500	-
13.2(Moisture proofness)	-	1000	-
13.3(Leakage current test)	-	500	-
12.6(Vibration Severity)	-	500	-

15 Jun, 2026

-
-

12017

ATCC TEST LABS LLP

8172626

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	1000	-
11.2(General)	-	1000	-
11.3(Heating)	-	1000	-
13.2(Leakage current at operating temperature)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
14(Transient Over Voltages)	-	2000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.2(Spillage Test)	-	500	-
15.3(Humidity Test)	-	3000	-
15.0(General)	-	500	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
19(Abnormal Operation)	-	3000	-
20(Stability test)	-	1000	-
21(Mechanical Strength Test)	-	2000	-
22(Construction verification related test)	-	3000	-
23(General)	-	1000	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	2000	-
26(Terminals for external conductors)	-	2000	-
27(Provision for earthing)	-	1000	-
28(Screw test and connections)	-	2000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
30.1(Ball pressure test)	-	2000	-
30.2(Glow Wire Test)	-	2000	-
30.2(Needle Flame Test)	-	1000	-
31(Resistance to Rusting)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
11.4(Heating appliances)	-	100	-
11.5(Motor-operated appliances)	-	100	-
11.6(Combined appliances)	-	100	-
11.7(Duration corresponding)	-	100	-
11.8(Temperature rise)	-	1000	-

15 Jun, 2026

view Scope file
Exclusion - EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Test of synthetic rubber and ceramic material (Cl.22.32), Cl.22.46 Software Cl.24 Components. "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

12018

ATCC TEST LABS LLP

8172626

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	500	-
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	0	-
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	0	-
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	0	-
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	0	-
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	0	-
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	0	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	500	-
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	1000	-
Cl.6 of IS 302-2-35:2017(Classification)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	1000	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature )	-	1000	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	1000	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	1000	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	500	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	1000	-
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	1000	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	1000	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	1000	-
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	0	-
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	0	-
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	0	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	0	-
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	0	-
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	0	-
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	0	-
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	0	-
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	0	-
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	0	-
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	0	-
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	0	-
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	0	-
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	0	-
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	500	-
Cl.24 of IS 302-2-35:2017(Component )	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	1000	-
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	0	-
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	0	-
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	-
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	-
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	0	-
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	500	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	1000	-
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	1000	-
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	1000	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	1000	-
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	500	-
Cl.10 of IS 8978 : 1992(Finish)	-	500	-
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	2000	-
Cl.12 of IS 8978 : 1992(Endurance)	-	500	-

15 Jun, 2026

-
-

12019

ATCC TEST LABS LLP

8172626

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6 IS 302-2-35(Classification)	-	0	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	100	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	500	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	100	-
Cl. 11 IS 302-2-35(Heating)	-	500	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	500	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	100	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	500	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	100	-
Cl. 22 IS 302-2-35(Construction )	-	500	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	0	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	500	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	0	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	500	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	200	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	500	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	200	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	500	-
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	0	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	0	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	500	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	500	-

15 Jun, 2026

-
Exclusion - EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Test of synthetic rubber and ceramic material (Cl.22.32), Cl.22.46 Software Cl.24 Components.

12020

ATCC TEST LABS LLP

8172626

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31.0(Resistance To Rusting)	-	500	-
30.0(Resistance To Heat and Fire)	-	2000	-
29.0(Creepage Distances and Clearances)	-	1000	-
28.0(Screws and Connections)	-	1000	-
27.0(Provision For Earthing)	-	1000	-
26.0(Terminals for external conductors)	-	1000	-
25.0(Supply Connection and External Flexible Cords)	-	1000	-
24.0(Components)	-	500	-
23.0(Internal Wiring)	-	1000	-
22.0(Construction)	-	3000	-
21.0(Mechanical Strength)	-	1000	-
20.0(Stability and mechanical hazards)	-	500	-
19.0(Abnormal Operation)	-	2000	-
17.0(Overload Protection of transformer and associated circuit)	-	500	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	-
15.0(Moisture resistance)	-	2000	-
14.0(Transient Overvoltage)	-	1500	-
13.0(Leakage Current and electric strength at operating temperature)	-	1000	-
11.0(Heating)	-	2000	-
10.0(Input and Current)	-	1000	-
8.0(Protection against access to live parts)	-	1000	-
7.0(Classification)	-	0	-
6.0(Marking and Instructions)	-	500	-

15 Jun, 2026

-
Exclusion - EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Test of synthetic rubber and ceramic material (Cl.22.32), Cl.22.46 Software Cl.24 Components.

12021

ATCC TEST LABS LLP

8172626

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	500	-
6(Classification )	-	0	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	500	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	1000	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	1000	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	1000	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	1000	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	1000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	1000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	1000	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	1000	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	1000	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	0	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	0	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	0	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	0	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	0	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	0	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	0	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	0	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	0	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	0	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	0	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	0	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	0	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	0	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	0	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	500	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	500	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	1000	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	0	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	0	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	500	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	1000	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	0	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	500	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	1000	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	1000	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	1000	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	500	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1500	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	3000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	1000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	500	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	500	-

15 Jun, 2026

-
-

12022

Stellar Test House, Noida

8171606

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

up to and including 450/750 Volts

12000 View breakup
Rs. 12000/- for single core cable, Rs. 1500/- extra charges for outdoor use and Rs. 1200/- extra for low temperature conditoin, Rs. 6000/- for FR cable, Rs. 10000/- for FR-LSH Cable, Rs. 2000/- extra for each additional core, Rs. 500/- Separte wire before standing. (10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Conductor resistance test)	-	1000	10% Discount for BIS
5.3(Thickness of Insulation)	-	200.00	10% Discount for BIS
9(Overall dimensions)	-	200.00	10% Discount for BIS
4.1(Wrapping test (for Al))	-	200.00	10% Discount for BIS
10.11(Per sulphate test (for tinned Cu cable only))	-	500.00	10% Discount for BIS
4.1(Tensile test (for Al)- After Stranding)	-	200.00	10% Discount for BIS
4.1(Annealing test (for copper))	-	200.00	10% Discount for BIS
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	500.00	10% Discount for BIS
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	500.00	10% Discount for BIS
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	500.00	10% Discount for BIS
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	500.00	10% Discount for BIS
Table 1 iii) c) 5)(Heat shock-Insulation )	-	500.00	10% Discount for BIS
Table 1 iii) d) 5)(Heat shock-Sheath )	-	500.00	10% Discount for BIS
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	500.00	10% Discount for BIS
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	500.00	10% Discount for BIS
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	1000.00	10% Discount for BIS
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	1000.00	10% Discount for BIS
Table 1 iii) d) 3)(Sheath- TS variation)	-	1000	10% Discount for BIS
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	1000	10% Discount for BIS
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	1000.00	10% Discount for BIS
Table 1 iii) c) 1)(Elongation (Without ageing))	-	1000.00	10% Discount for BIS
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	2000.00	10% Discount for BIS
10.4(Flammability test-Burning after flame removal)	-	500.00	10% Discount for BIS
10.4(Flammability test- Unaffected portion)	-	500.00	10% Discount for BIS
table 1 e) 3) (Volume Resistivity - Room temp )	-	500.00	10% Discount for BIS
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	500.00	10% Discount for BIS
table 1 e) 3) (IR constant- Room temp )	-	500.00	10% Discount for BIS
table 1 e) 3) (IR constant- max. Temp)	-	500.00	10% Discount for BIS
10.5(Oxygen index)	-	3000.00	10% Discount for BIS
10.7(Temperature index)	-	3000.00	10% Discount for BIS
10.1(HV (water immersion))	-	1000	10% Discount for BIS
Table 1 iii) c) 8)(Cold bend for insulation)	-	500	10% Discount for BIS
Table 1 iii) c) 9)(Cold impact for insulation)	-	500	10% Discount for BIS
10.8(Smoke density rating)	-	2500	10% Discount for BIS
10.6(Halogen evolution)	-	2500	10% Discount for BIS
10.2(HV (room temperature))	-	500	10% Discount for BIS

26 Sep, 2028

-
Included w.e.f. 19.12.2023. Exclusion: Copper purity test

12023

CENTRAL INSTITUTE OF ROAD TRANSPORT (CIRT), PUNE

7105101

IS 15636 (2012)

Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply - Specification (First Revision)

88000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Section width of tyre)	-	2420	1) Complete Test charges Rs. 88000/- 2) Test charges Rs. 2420/- includes Tyre marking, Dimensions, TWI and Report preparation (Above Test Charges includes 15 % discount for BIS Samples)
4.1.1.2(Tyre outer diameter)	-	2420	1) Complete Test charges Rs. 88000/- 2) Test charges Rs. 2420/- includes Tyre marking, Dimensions, TWI and Report preparation (Above Test Charges includes 15 % discount for BIS Samples)
4.2(Endurance test)	-	72400	1) Complete Test charges Rs. 88000/- 2) Test charges Rs. 72400/- for Endurance test (47 hrs) (Above Test Charges includes 15 % discount for BIS Samples)
4.3.1(Load/Speed performance test)	-	6530	1) Complete Test charges Rs. 22000/- for speed Category Q & above 2) Test charges Rs. 6530/- for Load/Speed performance test (Above Test Charges includes 15 % discount for BIS Samples)
4,4,1(Tread -wear indicators)	-	2420	1) Complete Test charges Rs. 88000/- 2) Test charges Rs. 2420/- includes Tyre marking, Dimensions, TWI and Report preparation (Above Test Charges includes 15 % discount for BIS Samples)
4.5(Tyre strength test (Plunger rest))	-	13170	1) Complete Test charges Rs. 88000/- 2) Test charges Rs. 13170/- for Tyre strength test (Plunger rest) (Above Test Charges includes 15 % discount for BIS Samples)
5.2, Annex E(Arrangement of tyre markings)	-	2420	1) Complete Test charges Rs. 88000/- 2) Test charges Rs. 2420/- includes Tyre marking, Dimensions, TWI and Report preparation (Above Test Charges includes 15 % discount for BIS Samples)

15 Sep, 2028

-
-

12024

CENTRAL INSTITUTE OF ROAD TRANSPORT (CIRT), PUNE

7105101

IS 13098 (2012)

Automotive vehicles - Tubes for pneumatic tyres - Specification (First Revision)

17300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3/3.1 (for valve refer IS 9081)(MATERIALS, FORM AND FIT)	-	4600	(Cl.No.3.2 & 3.2.1, & 3.3) - Material (Rs.1500/-) , % Rubber HC Content by volume (Rs.1700/-) , Density (Rs.900/-) , Workmanship and Form & Fit Test (Rs.500/-) - Total (Rs.4600/-)
3/3.3(Uniformity(The Thickness shall not vary from the arithmetic mean of the readings by ± 17.5 % at any point in longitudinal direction :-Crown centre,Base centre,Side wall - 1,Side wall - 2))	-	1600	-
4/4.1.1(Elongation at break (Class A' Tubes))	-	1800	-
4/4.1.1(Elongation at break (Class B' Tubes))	-	1800	-
4/4.1.2( Strength of Splice (Class A' Tubes))	-	1900	-
4/4.1.2( Strength of Splice (Class B' Tubes))	-	1900	-
4/4.1.3 Refer annex B(Set After Ageing(Class A' Tubes))	-	2100	-
4/4.1.3 Refer annex B(Set After Ageing(Class B' Tubes))	-	2100	-
5(AIR TIGHTNESS)	-	500	-
4/4.1.4 Refer annex C(Accelerated Ageing(Both Class A and Class B))	-	4300	Other Testing Charges for Cl.No. 6.0 Marking - Rs.500/- Total Test Charges are Rs.17,300/- (10% Discount in case of Test Charges are Borne by BIS) for IS:13098:2012

15 Sep, 2028

-
-

12025

CENTRAL INSTITUTE OF ROAD TRANSPORT (CIRT), PUNE

7105101

IS 13154 (2015)

Automotive vehicles - Tyres for agricultural vehicles and their trailers - Specification (First Revision)

136660 View breakup
For tyres having speed category below 65kmph : Rs. 50,860/- (Except Cl.4.3); For tyres having Endurance test for 65kmph (Load/speed Test) : Rs. 1,36,660/- (10% discount to BIS samples)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1.1(Section Width of Tyre)	-	2860	1) Complete Test charges are Rs. 1,36,660/- 2) Test charges Rs. 2860/- includes Tyre marking ( Height of Marking), Dimensions, and Report preparation
4.1.1.2(Tyre Outer Diameter)	-	2860	1) Complete Test charges are Rs. 1,36,660/- 2) Test charges Rs. 2860/- includes Tyre marking ( Height of Marking), Dimensions, and Report preparation
4.2(Burst Test)	-	48000	1) Complete Test charges are Rs. 1,36,660/- 2) Test charges Rs. 48000/- for Burst Test
4.3(Endurance Test (Load /Speed Test))	-	85800	1) Complete Test charges are Rs. 1,36,660/- 2) Test charges Rs. 85,800/- for Tyre having Speed 65 kmph

15 Sep, 2028

-
-

12026

CENTRAL INSTITUTE OF ROAD TRANSPORT (CIRT), PUNE

7105101

IS 9081 (2017)

Automotive vehicles - Valves and valve accessories for pneumatic tyres - Specification (Fifth Revision)

14700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1/4.2/4.3 & 5/5.1/5.2(Dimensions and Design Features & Valve Designation)	-	1400	Testing charges for Dimensions & Valve Core Interchangeability (Cl.No.4.1, 4.2, 4.3, 5.1, 5.2 & 7.3) = Rs.1400
6.1(Materials)	-	3000	(Metal Stem & Rubber Base) (Rs.1500+1500 = 3000)
6.2(Bendability of Valve Stem)	-	500	-
6.3(Hardness, Shore A)	-	900	-
6.4(Pull Out Strength Of Rubber Base)	-	1200	-
6.5(Adhesion Test)	-	600	-
6.6(Buffing)	-	500	Testing charges for Buffing & Workmanship (Cl.No. 6.6, 6.7, & 7.6) are Rs.500
6.7(Wormanship)	-	0	Already mentioned in Cl.No. 6.6 (Buffing)
6.8(Marking)	-	500	Testing charges for Marking (Cl.No. 6.8 & 7.5) are Rs.500
7.1(Materials)	-	3000	(Valve Core, Spring & Rubber Sealing Washers) (Rs.1500+1500 = 3000)
7.2(Valve Core Leakage)	-	1000	-
7.3(Valve Core Interchangeability)	-	0	Already mentioned in Cl.No. 4 (Dimensions)
7.4(Acceptable Operating Temperature)	-	2100	-
7.5(Marking)	-	0	Already mentioned in Cl.No. 6.8 (Marking)
7.6(Wormanship)	-	0	Already mentioned in Cl.No. 6.6 (Buffing & Workmanship)

15 Sep, 2028

-
-

12027

Softlines and Electrical Safety Testing Laboratory TUV Rheinland India Pvt Ltd., Gurgaon (8167106)

8167106

IS 3736 (1995)

Canvas boots, rubber sole - Specification (Second Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	625	-
Cl.4.1.1 upper IS 1969(b)Weft)	-	625	-
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	500	-
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	500	-
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	1000	-
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	420	-
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	625	-
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	625	-
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	500	-
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	500	-
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	500	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	1200	-
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	500	-
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	1000	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	625	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	625	-
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	625	-
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	500	-
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	500	-
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	1500	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	625	-
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	625	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	625	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	1200	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	1200	-
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	500	-
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	1650	-
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	1650	-
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	500	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	500	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	500	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	500	-
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	500	-
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	500	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	500	-
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	625	-
Cl.4.4.5 ( Table 1.)(b) Weft )	-	625	-
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	500	-
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	500	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	500	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	625	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	625	-
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	625	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	500	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	500	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	500	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	500	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	625	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	625	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	625	-
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	-	-
Cl.4.1.1 upper IS 1969(b)Weft)	-	-	-
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	-	-
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	-	-
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	-	-
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	-	-
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	-	-
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	-	-
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	-	-
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	-	-
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	-	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	-	-
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	-	-
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	-	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	-	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	-	-
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	-	-
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	-	-
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	-	-
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	-	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	-	-
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	-	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	-	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	-	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	-	-
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	-	-
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	-	-
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	-	-
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	-	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	-	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	-	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	-	-
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	-	-
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	-	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	-	-
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	-	-
Cl.4.4.5 ( Table 1.)(b) Weft )	-	-	-
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	-	-
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	-	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	-	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	-	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	-	-
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	-	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	-	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	-	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	-	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	-	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	-	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	-	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	-	-

19 Jan, 2027

-
Included w.e.f. 10.05.2023

12028

Softlines and Electrical Safety Testing Laboratory TUV Rheinland India Pvt Ltd., Gurgaon (8167106)

8167106

IS 3735 (1996)

Canvas Shoes, Rubber Sole

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	1250	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	1000	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	500	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	500	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	625	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	1000	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	500	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	625	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	625	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	625	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	1200	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	1500	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	1500	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	500	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	500	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	500	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	500	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	500	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	500	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	500	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	500	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	500	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	500	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	500	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	500	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	500	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	500	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	625	-
4.5(Finish )	-	500	-
4.6(Mass )	-	500	-
5, 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking)	-	500	-

19 Jan, 2027

-
Amendment 5 included w.e.f. 09.10.2024

12029

Mananda Test House, Derabassi

9134736

IS 15658 (2006)

Precast concrete blocks for paving - Specification

All Grades

19950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(Physical requirement)	-	100	Complete testing charges for dimensions test are Rs. 4000/-
6.1.3(Physical requirement)	-	100	Complete testing charges for dimensions test are Rs. 4000/-
6.1.4(Physical requirement)	-	100	Complete testing charges for dimensions test are Rs. 4000/-
6.2.1 & 7.1(VISUAL INSPECTION)	-	100	Complete testing charges for dimensions test are Rs. 4000/-
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	500	Complete testing charges for dimensions test are Rs. 4000/-
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	500	Complete testing charges for dimensions test are Rs. 4000/-
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	500	Complete testing charges for dimensions test are Rs. 4000/-
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	500	Complete testing charges for dimensions test are Rs. 4000/-
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	500	Complete testing charges for dimensions test are Rs. 4000/-
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	500	Complete testing charges for dimensions test are Rs. 4000/-
Table 1(MINIMUM PAVER BLOCK THICKNESS)	-	500	Complete testing charges for dimensions test are Rs. 4000/-
B-1.3.2(MEAN INDIVIDUAL THICKNESS (of all eight test specimens), T)	-	500	Complete testing charges for dimensions test are Rs. 4000/-
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	500	Complete testing charges for dimensions test are Rs. 4000/-
B-1.3.3(INDIVIDUAL ASPECT RATIO (L/T) (of all eight test specimens))	-	400	Complete testing charges for dimensions test are Rs. 4000/-
B-5(AVERAGE ASPECT RATIO (L/T) (for eight test specimens))	-	400	Complete testing charges for dimensions test are Rs. 4000/-
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	500	Complete testing charges for dimensions test are Rs. 4000/-
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	500	Complete testing charges for dimensions test are Rs. 4000/-
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	500	Complete testing charges for dimensions test are Rs. 4000/-
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	500	Complete testing charges for dimensions test are Rs. 4000/-
B-5(INDIVIDUAL PLAN AREA, ASP (of all eight test specimens) )	-	400	Complete testing charges for dimensions test are Rs. 4000/-
B-5(AVERAGE PLAN AREA, ASP (for eight test specimens))	-	400	Complete testing charges for dimensions test are Rs. 4000/-
B-5(INDIVIDUAL WEARING FACE AREA, Asw (of all eight test specimens))	-	400	Complete testing charges for dimensions test are Rs. 4000/-
B-5(AVERAGE WEARING FACE AREA, Asw (for eight test specimens))	-	400	Complete testing charges for dimensions test are Rs. 4000/-
B- 4.3(MEAN INDIVIDUAL SQUARENESS (of all eight test specimens) )	-	400	Complete testing charges for dimensions test are Rs. 4000/-
B-5(AVERAGE SQUARENESS (for eight test specimens))	-	400	Complete testing charges for dimensions test are Rs. 4000/-
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	400	Complete testing charges for dimensions test are Rs. 4000/-
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	750	-
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-	1600	Complete testing charges for compressive strength test are Rs. 1600/-
6.2.5.1(INDIVIDUAL COMPRESSIVE STRENGTH (Individual strength of eight test specimen))	-	200	Complete testing charges for compressive strength test are Rs. 1600/-
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	3200	Complete testing charges for abrasion test (both dry & wet) are Rs. 6400/-
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	3200	Complete testing charges for abrasion test (both dry & wet) are Rs. 6400/-
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	300	Complete testing charges for tensile splitting strength test are Rs. 2400/-
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	2400	Complete testing charges for tensile splitting strength test are Rs. 2400/-
Annex G-7(INDIVIDUAL FAILURE LOAD/UNIT LENGTH (Individual Failure Load of eight test specimen ))	-	300	Complete testing charges for tensile splitting strength test are Rs. 2400/-
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	600	Complete testing charges for flexural strength test are Rs. 4800/-
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	4800	Complete testing charges for flexural strength test are Rs. 4800/-
Annex-G-7(INDIVIDUAL BREAKING LOAD (Individual Load of eight test specimen ))	-	600	Complete testing charges for flexural strength test are Rs. 4800/-
Annex-G-7(AVERAGE BREAKING LOAD)	-	4800	Complete testing charges for flexural strength test are Rs. 4800/-

02 Oct, 2028

-
-

12030

Mananda Test House, Derabassi

9134736

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

15950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	30000	30000 for Freeze Thaw Durability Test
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	30000	30000 for Freeze Thaw Durability Test
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	30000	30000 for Freeze Thaw Durability Test
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	30000	30000 for Freeze Thaw Durability Test
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	30000	30000 for Freeze Thaw Durability Test
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	30000	30000 for Freeze Thaw Durability Test
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	30000	30000 for Freeze Thaw Durability Test
Clause 7.3, Annex G(Average Breaking Load)	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3, Annex G(Individual Breaking Load)	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	4800	4800 for Flexural Strength/Breaking Load Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	2400	2400 for Tensile Splitting Strength/Failure load per unit length test.
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	1200	1200 for Wet abrasion test.
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	1200	1200 for Wet abrasion test.
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	1200	1200 for Dry abrasion test.
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	1200	1200 for Wet abrasion test.
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1600	1600 for Compressive Strength Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1600	1600 for Compressive Strength Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	750	750 for Water Absorption Test.
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	750	750 for Water Absorption Test.
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	400	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	500	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	500	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	500	4000 for complete dimensions test.
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	400	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	400	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	4000 for complete dimensions test.
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	500	4000 for complete dimensions test.
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	100	-
Clause 7.1.3 (Colour and Texture)	-	100	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	100	-
Clause 7.1.1 (General Quality)	-	100	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	500	4000 for complete dimensions test.
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	500	4000 for complete dimensions test.
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	500	4000 for complete dimensions test.
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	500	4000 for complete dimensions test.

02 Oct, 2028

-
Amendment No.1 Included w.e.f. 06.02.2023

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number