BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15363 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

12481

Amit Test and Calibration Centre (8172006)

8172006

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

25000 View breakup
Rs. 10,000/- for Category-01& Rs. 20,000 for category Cl & C2 (1 core) Rs. 14,000/- for Category — 01 & Rs. 24,000 for category Cl & C2 (up to 4 cores) Rs. 18,500/- for Category — 01& Rs. 28,500 for category Cl & C2 (above 4 cores and up to 12 Cores cable) Rs. 22,500/- for Category —01& Rs. 32,500 for category Cl & C2 (above 12 cores and up to 19 Cores cable) Rs. 27,500/- for Category — 01& Rs. 37,500 for category C1 & C2 (above 19 cores and up to 37 Cores cable) Rs. 32,500/- for Category —01& Rs. 42,500 for category Cl & C2 (above 37 cores and up to 61 Cores cable) Additional Rs. 2,500/- for armour test Additional Rs. 2,500/- for optional tests (cold bend / cold impact / Armour Resistance)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	1000	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	1000	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	1000	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	1000	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	1000	-
6.1(MATERIALS : ARMGURING)	-	1000	-
6.2(MATERIALS : ARMGURING)	-	1000	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	1000	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	1000	-
8.1(CONSTRUCTION : CONDUCTOR)	-	1000	-
8.2(CONSTRUCTION : CONDUCTOR)	-	1000	-
9.1(INSULATION )	-	1000	-
9.2(INSULATION : Thickness of Insulation)	-	2000	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	2000	-
9.4(INSULATION : Application of Insulation)	-	1000	-
10.1(CORE IDENTIFICATION)	-	1000	-
10.2(CORE IDENTIFICATION)	-	1000	-
10.3(CORE IDENTIFICATION)	-	1000	-
10.3.1(Arrangement of Marking)	-	1000	-
11.1(LAYING UP OF CORES)	-	1000	-
11.2(LAYING UP OF CORES)	-	1000	-
12.1(INNER SHEATH)	-	1000	-
12.2(INNER SHEATH)	-	1000	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	2000	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	2000	-
13.1.1(ARMOURING : Application)	-	1000	-
13.1.2(Armouring: Coverage )	-	2000	-
13.1.3(ARMOURING : Direction of lay )	-	1000	-
13.1.4(ARMOURING : Application)	-	1000	-
13.2(ARMOURING : Type of Armour)	-	1000	-
13.2.1(ARMOURING : Type of Armour)	-	1000	-
13.3(Armouring : Dimensions -Wire Diameter)	-	2000	-
13.3(Armouring : Dimensions -Formed wire )	-	2000	-
13.4(ARMOURING : Joints)	-	1000	-
13.5.1(ARMOURING : Resistance)	-	2000	-
13.5.2(ARMOURING : Resistance)	-	2000	-
13.6 a)(ARMOURING: Tensile Strength)	-	2000	-
13.6 b)(ARMOURING: Elongation )	-	2000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	2000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	2000	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	2000	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	2000	-
13.6 g)(ARMOURING: Resistivity)	-	2000	-
14.1(OUTER SHEATH)	-	1000	-
14.2(OUTER SHEATH)	-	1000	-
14.3(OUTER SHEATH : Colour )	-	1000	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	2000	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	2000	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	2000	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	2000	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	2000	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	2000	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	2000	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	2000	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	2000	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	2000	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	2000	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	2000	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	5000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	5000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	5000	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	5000	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	5000	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	5000	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	5000	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	5000	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	2000	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	2000	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	2000	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	2000	-
15.1 d)4)(Hot deformation : Insulation )	-	2000	-
15.1 d)4)(Hot deformation : Sheath )	-	2000	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	5000	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	5000	-
15.1 d)6)(Heat shock test- Insulation )	-	2000	-
15.1 d)6)(Heat shock test- sheath )	-	2000	-
15.1 d)7)(Thermal stability- insulation )	-	2000	-
15.1 d)7)(Thermal stability- Sheath )	-	2000	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	2000	-
15.1 e)(Insulation resistance test : IR Constant )	-	2000	-
15.1 f)(High voltage test ( water immersion test ))	-	5000	-
15.1 g)(High voltage test at room temperature)	-	2000	-
15.1 g)(High voltage test at room temperature)	-	2000	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	3000	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	3000	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	3000	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	3000	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	2000	-
16.1(DETAILS OF TESTS : General)	-	1000	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	2000	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	2000	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	5000	-
16.4(Flammability Test)	-	2000	-
16.5(Oxygen Index Test)	-	5000	-
16.6(Flame Retardance Test on Single Cables)	-	2000	-
16.7(Flame Retardance Test on Bunched Cables)	-	10000	-
16.9(Test for Halogen Acid Gas Evolution)	-	5000	-
16.1(Temperature Index)	-	5000	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	1000	-
17.2(IDENTIFICATION : Cable Identification)	-	1000	-
17.2.1(IDENTIFICATION : Cable Identification)	-	1000	-
17.3(IDENTIFICATION : Cable Code)	-	1000	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	2000	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	2000	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	2000	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	2000	-
16.4(Flammability Test- Un affected portion)	-	2000	-
16.4(Flammability Test- Period of Burning)	-	2000	-
9.3(Minimum Thickness of Reduce core insulation)	-	2000	-
9.2(Thickness of Reduce core insulation)	-	2000	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	1000	-
Cl No. 16.10(Smoke density test)	-	5000	-
Table 4(Copper purity test)	-	5000	-

-
-

12482

Amit Test and Calibration Centre (8172006)

8172006

IS 2141 (2000)

Hot dip galvanized stay strand - Specification (Fourth Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(S)	-	500	-
4(P)	-	500	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.32 to 0.40 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.40 to 0.50 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.50 to 0.56 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.56 to 0.63 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.63 to 0.71 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.71 to 0.80 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.80 to 0.90 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.90 to 1.00 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.00 to 1.25 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.25 to 1.40 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.40 to 1.60 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.60 to 1.80 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 fo1.80 to 2.00 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.00 to 2.24 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.24 to 2.50 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.50 to 2.80 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.2.80 to 3.15 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for3.15 to 3.55 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 3.55 to 4.00 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 4.00 to 5.00 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 5.00 to 7.10 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 7.10 to 10.00 mm dia For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.32 to 0.40mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.40 to 0.50mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.50 to 0.56 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.56 to 0.63 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.63 to 0.71 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.71 to 0.80 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.80 to 0.90 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.90 to 1.00 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.00 to 1.25 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.25 to 1.40 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.40 to 1.60 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.60 to 1.80 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.80 to2.00 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 For 2.00 to 2.24 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.24 to2.50 mm For Hard Core For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.50 to2.80 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.80 to3.15 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.15 to 3.55 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.55 to 4.00 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia4.00 to5.00 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 5.00 to 7.10 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 7.10 to10.00 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.2 to 0.32 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.32 to 0.40 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.40 to 0.50 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.50 to 0.56 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.56 to 0.63 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.80 to 0.90 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 0.90 to 1.00 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 1.60 to 1.80 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 fo1.80 to 2.00 mm dia)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.24 to 2.50 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.50 to 2.80 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 2.80 to 3.15 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for3.15 to 3.55 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 3.55 to 4.00 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 4.00 to 5.00 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 7.10 to 10.00 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.20 to 0.32 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.32 to 0.40mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.40 to 0.50mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.50 to 0.56 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.63 to 0.71 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.00 to 1.25 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.25 to1.40 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.60 to 1.80 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.80 to2.00 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia2.00 to2.24 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.24 to2.50 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.50 to2.80 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 2.80 to3.15 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.15 to 3.55 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 3.55 to 4.00 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia4.00 to5.00 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 5.00 to 7.10 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 7.10 to10.00 mm For Soft Core)	-	2000	-
11(a) Size)	-	1000	-
11(b) Construction)	-	1000	-
11(c) tensile designation)	-	1000	-
11(d) lay)	-	1000	-
11(e) coating)	-	1000	-
11(f) length)	-	1000	-
11( g) mass)	-	1000	-
11(h) manufacturer's name or trade mark)	-	1000	-
11(i) lot number along with the order number)	-	1000	-
11(j) BIS Standards Mark)	-	1000	-
11(c) tensile designation)	-	1000	-
11(d) lay)	-	1000	-
11(e) coating)	-	1000	-
11(f) length)	-	1000	-
11( g) mass)	-	1000	-
11(h) manufacturer's name or trade mark)	-	1000	-
11(i) lot number along with the order number)	-	1000	-
11(j) BIS Standards Mark)	-	1000	-
5(a) Grade)	-	1000	-
5(b) Tensile Grade)	-	1000	-
6(a) Lay)	-	1000	-
6(b) Construction)	-	1000	-
7(Freedom from defects)	-	1000	-
9(a) Tensile)	-	2000	-
9(b) Elongation)	-	2000	-
9(c) Galvanizing Test)	-	2000	-
11(a) Size)	-	1000	-
11(b) Construction)	-	1000	-
5(a) Grade)	-	1000	-
5(b) Tensile Grade)	-	1000	-
6(a) Lay)	-	1000	-
6(b) Construction)	-	1000	-
7(Freedom from defects)	-	1000	-
9(a) Tensile)	-	2000	-
9(b) Elongation)	-	2000	-
9(c) Galvanizing Test)	-	2000	-
11(a) Size)	-	1000	-
11(b) Construction)	-	1000	-
11(c) tensile designation)	-	1000	-
11(d) lay)	-	1000	-
11(e) coating)	-	1000	-
11(f) length)	-	1000	-
11( g) mass)	-	1000	-
11(h) manufacturer's name or trade mark)	-	1000	-
11(i) lot number along with the order number)	-	1000	-
11(j) BIS Standards Mark)	-	1000	-
5(a) Grade)	-	1000	-
5(b) Tensile Grade)	-	1000	-
6(a) Lay)	-	1000	-
6(b) Construction)	-	1000	-
7(Freedom from defects)	-	1000	-
9(a) Tensile)	-	2000	-
9(b) Elongation)	-	2000	-
9(c) Galvanizing Test)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.56 to 0.63 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.63 to 0.71 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.71 to 0.80 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.80 to 0.90 mm)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.90 to 1.00 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.00 to 1.25 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.25 to1.40 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.40 to1.60 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia2.00 to2.24 mm For Hard Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Mass of Zinc coating- as per IS 6745 for 5.00 to 7.10 mm dia For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 0.71 to 0.80 mm For Soft Core)	-	2000	-
9.2 referes to IS 4826, Table 1(Uniformity of zinc coating- As per IS 2633 for Dia 1.40 to1.60 mm For Soft Core)	-	2000	-

-
-

12483

Amit Test and Calibration Centre (8172006)

8172006

IS 12776 (2002)

Galvanized strand for earthing - Specification (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Freedom From Defects (IS 12776))	-	1000	-
5.3(Joints in wires (IS 12776))	-	1000	-
6- Annex-A, Sl-2(Size of the wire (IS 12776))	-	1000	-
6- Annex-A, Sl-8(Lay (IS 12776))	-	1000	-
8.1-Annex-A,Sl-9(Breaking Force of Strand (IS 12776))	-	2000	-
8.2-Annex-A,Sl-6(Elongation of wire, IS 10810(Part-37))	-	2000	-
8.2-Annex-A,Sl-3(Tensile Strength of wire IS 10810(Part-37))	-	2000	-
8.3-Annex-A,Sl-12(Resistance at 200 C (IS 12776))	-	2000	-
8.4(Wrapping Test (IS 12776))	-	2000	-
8.5-Annex-A-Sl-7a(Amount of zinc Coating (IS 6745))	-	2000	-
8.5-Annex-A-Sl-7b(Uniformity of Coating (IS 2633))	-	2000	-
8.5-Annex-A-Sl-4(Torsion Test IS 10810(Part-37))	-	2000	-

-
-

12484

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Inputting of text)	-
5.2 (Message Readability)	-
6 (Marking)	-

-
-

12485

TRUSTIN ANALYTICAL SOLUTIONS PRIVATE LIMITED, CHENNAI

6139136

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

5888 View breakup
Rs.5888/- per size

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Dimensions Fig 1 and Table 1)	-	100	-
4.2(Dimensions Fig 1 and Table 1)	-	100	-
4.2(Dimensions Fig 1 and Table 1)	-	100	-
4.2(Dimensions Fig 1 and Table 1)	-	100	-
4.2(Dimensions Fig 1 and Table 1)	-	100	-
4.2(Dimensions Fig 1 and Table 1)	-	100	-
4.2(Dimensions Fig 1 and Table 1)	-	100	-
4.3(Thickness)	-	250	-
4.4.1(Physical Properties)	-	250	-
4.4.1(Physical Properties)	-	250	-
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	750	-
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	500	-
4.4.3(After heat ageing in autoclave)	-	500	-
4.4.4(Tension Set)	-	500	-
4.5(pH of Aqueous Extract )	-	500	-
4.1.3(Manufacture)	-	100	-
4.1.2(Manufacture)	-	100	-

21 Jan, 2027

-
-

12486

Amit Test and Calibration Centre (8172006)

8172006

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

40000 View breakup
Rs. 3,500/- [15 sq. mm.], Rs. 10,000/-[22, 34, 55, 80 & 100 sq. mm.], Rs. 20,000/- [125, 148, 173, 200 & 232 sq. mm.], Rs. 30,000/- [288, 346, 400 & 465 sq. mm.], Rs. 40,000/-[525, 570, 604, 642, 695 & 767 sq. mm.]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	1000	-
7.1 Table-1(Dimensional measurement of wires)	-	1000	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	2000	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	1000	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	1000	-
9.1(Stranding)	-	1000	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	1000	-
9.3(Direction of Lay)	-	1000	-
9.4(Multiple layers of wires)	-	1000	-
11(Packing and Marking)	-	1000	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	2000	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	2000	-
12.3 Table 1(Elongation Test- Before Stranding)	-	2000	-
12.3 Table 1(Elongation Test- After Stranding)	-	2000	-
12.4 Table 1(Resistance of Aluminium wire)	-	2000	-
9.2(Lay Ratio 24 wire layer)	-	1000	-
9.2(Lay Ratio 18 wire layer)	-	1000	-
9.2(Lay Ratio 12 wire layer)	-	1000	-
9.2(Lay Ratio 3/6 wire layer)	-	1000	-

-
-

12487

Amit Test and Calibration Centre (8172006)

8172006

IS 398 : Part 3 (1976)

Specification for aluminium conductors for overhead transmission purposes: Part 3 aluminium conductors, aluminized steel reinforced (Second Revision)

20000 View breakup
Rs.6,200/- For 7 strands, Rs.8900/- For 13 strands, Rs.13,400/- For 37 strands, Rs.15,000/- For 49 strands, Rs.20,000/- For 61 strands.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.6(Aluminizing Test)	-	2000	-
7.2.2 Table 3(Resistance test-Aluminium wire Calculated Resistance)	-	2000	-
12.5 Table 1(Resistance test-Aluminium wire after stranding)	-	2000	-
12.5 Table 1(Resistance test-Aluminium wire before Stranding)	-	2000	-
12.4.2(Wrapping TestAluminized Steel Wires After Stranding)	-	2000	-
12.4.2(Wrapping Test Aluminized Steel Wires Before Stranding)	-	2000	-
12.4.1(Wrapping Test Aluminium Wires After Stranding)	-	2000	-
12.4.1(Wrapping Test Aluminium Wires Before Stranding)	-	2000	-
12.3.2(Ductility by Elongation Test after stranding)	-	2000	-
12.3.2(Ductility by Elongation Test before stranding)	-	2000	-
12.3.1(Ductility by Torsion Test after stranding)	-	2000	-
12.3.1(Ductility by Torsion Test after stranding)	-	2000	-
12.3.1(Ductility by Torsion Test before stranding)	-	2000	-
12.3.1(Ductility by Torsion Test before stranding)	-	2000	-
12.2 Table 2(Breaking Load of aluminized steel wires After Stranding)	-	2000	-
12.2 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	2000	-
12.2 Table 2(Breaking Load of aluminized steel wires Before Stranding)	-	2000	-
12.2 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	2000	-
9.5(STRANDING)	-	1000	-
9.4(STRANDING)	-	1000	-
9.3 Table 4(STRANDING)	-	1000	-
9.2 Table 4(STRANDING : Lay Ratio For Steel Core)	-	1000	-
9.2 Table 4(STRANDING : Lay Ratio For Aluminium Wire)	-	1000	-
9.2 Table 4(STRANDING : Lay Ratio For Aluminium Wire)	-	1000	-
9.2 Table 4(STRANDING : Lay Ratio For Aluminium Wire)	-	1000	-
8.2(JOINTS IN WIRES : Aluminized Steel Wires)	-	1000	-
8.1(JOINTS IN WIRES : Aluminium Wires)	-	1000	-
7.1.2.2 Table 2(Diameter of Alumized Steel Wires After Stranding)	-	1000	-
7.1.2.1 Table-1(Diameter of Aluminium Wires After Stranding)	-	1000	-
7.1.2.2 Table 2(Diameter of Alumized Steel Wires Before Stranding)	-	1000	-
7.1.2.1 Table-1(Diameter of Aluminium Wires Before Stranding)	-	1000	-

-
-

12488

Amit Test and Calibration Centre (8172006)

8172006

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

60000 View breakup
Type test: Rs. 10500/- [10, 18, 30, 50 & 80 sq. mm], Rs. 15500/- [100 sq. mm], Rs. 115000/- [ 150 & 200 sq. mm], Rs. 126000/- [400 & 560 sq. mm] & Rs. 146000/-[420 & 520 sq. mm.]; Restricted to (I) For galvanized steel core only (consisting of 7 steel strands)- Rs. 3,275/-, (II) For galvanized steel reinforced stranded conductors with nominal aluminium area up to and including 100 sq. mm-(a) For single steel wire core (1 steel + 6 Aluminium)- Rs. 2,925/- (b) For 7 wire core (7 steel + 6 Aluminium) - Rs. 5,000/- (III) For galvanized steel reinforced stranded conductors with nominal aluminium area more than 100 sq. mm (excluding special tests as per Cl. 13.9, 13.10 & 13.11)-(a) For stranded conductors with 37 strands- Rs. 10,850/-, (b) For stranded conductors with 49 strands-Rs.12000/- © for stranded conductors with 61 strands-Rs. 14650/- for BIS Samples

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	1000	-
10 (elec)(Stranding)	-	1000	-
10 (elec)(Stranding)	-	1000	-
10 (elec)(Stranding)	-	1000	-
10 (mech)(Stranding)	-	1000	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	2000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	2000	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	2000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	2000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	2000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	2000	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	2000	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	2000	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	2000	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	2000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	2000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	2000	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	2000	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	2000	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	2000	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	2000	-
13.7.2 (chem)(Mass of Zinc coating)	-	2000	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	2000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.9 (elec)(Surface condition test)	-	20000	-
13.10 (elec)(Ultimate breaking load)	-	20000	-
13.11 (elec)(Stress-strain test)	-	20000	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	2000	-
13.7.2 (elec)(Mass of Zinc coating)	-	2000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	2000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	2000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	2000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	2000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	2000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	2000	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	2000	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	2000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	2000	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	2000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	2000	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	2000	-
10 (elec)(Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1000	-

-
-

12489

Amit Test and Calibration Centre (8172006)

8172006

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

21000 View breakup
Rs.2100/- for 7 wire stands, Rs. 3250/- for 19 Strands, Rs.1000/- for Separated Wire before Stranding (If provided)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	1000	-
12.3, Table-1(Breaking load before stranding)	-	2000	-
12.3, Table-1(Breaking load after stranding)	-	2000	-
12.4(Wrapping test)	-	2000	-
12.5, Table 1(Resistance test)	-	2000	-
12.6, Table 3(Measurement of lay ratio)	-	1000	-
9.3(Stranding)	-	1000	-
6(Freedom from defects)	-	1000	-

-
-

12490

TRUSTIN ANALYTICAL SOLUTIONS PRIVATE LIMITED, CHENNAI

6139136

IS 13422 (1992)

Disposable surgical rubber gloves specification

7650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2 and Table 1 Fig. 1(Dimensions - Length)	-	150	-
5.2.2 and Table 1 Fig. 1(Dimensions - Width)	-	250	-
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Finger)	-	250	-
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Palm)	-	250	-
5.2.2 and Table 1 Fig. 1(Dimensions - Thickness of Cuff)	-	250	-
5.3 and Table 2( Tensile Strength Before Ageing)	-	500	-
5.3 and Table 2( Elongation at Break Before Ageing)	-	500	-
5.3 and Table 2(Stress at 500% Elongation at Break Before Ageing)	-	500	-
5.3 and Table 2( Tensile StrengthAfter Accelerated Ageing)	-	1000	-
5.3 and Table 2( Elongation at Break After Accelerated Ageing)	-	1000	-
5.5(Airtight Test)	-	1000	-
5.4(Sterility)	-	2000	-

21 Jan, 2027

-
-

12491

GODREJ - NASHIK

7173406

IS 2052 (2023)

Compounded feeds for cattle ï¿½ Specification

TYPE 1 & TYPE 2

18054 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3 - Table 1 - i(Moisture - Cl 4 of IS 7874 (Part 1))	-	500	-
4.3 - Table 1 - ii(Crude protein (N x 6.25) - Cl 5 of IS 7874 (Part 1))	-	800	-
4.3 - Table 1 - iii(Crude fat - Cl 7 of IS 7874 (Part 1))	-	700	-
4.3 - Table 1 - iv(Crude fibre - Cl 8 of IS 7874 (Part 1))	-	1000	-
4.3 - Table 1 - v(Acid insoluble ash - Cl 10 of IS 7874 (Part 1))	-	600	-
4.3 - Table 2 - i(Salt (as NaCl) - Cl 4 of IS 7874 (Part 2))	-	900	-
4.3 - Table 2 - ii(Calcium (as Ca) - IS 13433 (Part 1 / Part 2))	-	500	-
4.3 - Table 2 - v(Urea - IS 7874 )	-	500	-
4.3 - Table 2 - vi(Vitamin A - ISO 14565)	-	1800	-
4.3 - Table 2 - viii(Vitamin E - Annex F)	-	1800	-
4.3 Table 2(Cadmium)	-	800	-
4.3 - Table 2 - vii(Vitamin D3 - Annex E)	-	1800	-
4.3 - Table 2 - ix(Aflatoxin B1- Annex G)	-	2000	-
4.3 - Table 2 - iv(Available Phosphorus - Annex C of IS 1374)	-	800	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	500	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	800	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	700	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	1000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	600	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	900	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	500	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	500	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	1800	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	1800	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	800	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	1800	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	2000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	800	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	800	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	800	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	500	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	800	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	700	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	1000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	600	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	900	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	500	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	800	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	800	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	500	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	1800	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	1800	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	1800	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	2000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	800	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	500	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	800	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	700	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	1000	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	600	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	900	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	500	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	500	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	1800	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	1800	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	800	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	1800	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	2000	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	800	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	800	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	900	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	500	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	800	-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	700	-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	1000	-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	600	-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	900	-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	800	-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	800	-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	800	-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	500	-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	1800	-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	1800	-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	1800	-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	2000	-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	800	-

30 Jul, 2026

-
Revised version of IS 2052:2023 Included w.e.f. 21.12.2023 Exclusion: Cl no.4.1 (General), Cl no.4.2 (Ingredients), Cl no.5 (Packing and marking)

12492

TRUSTIN ANALYTICAL SOLUTIONS PRIVATE LIMITED, CHENNAI

6139136

IS 5405 (2019)

Sanitary napkins – Specification (second revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(SIZES, Regular )	-	250	-
Cl 5(SIZES, Large)	-	250	-
Cl 5(SIZES, Extra Large)	-	250	-
Cl 5(SIZES, XXL)	-	250	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	500	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	500	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	1500	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	1000	-

21 Jan, 2027

-
Exclusion: Cl 7.4 (Biocompatibility Evaluation — Cytotoxicity, Irritation and Skin Sensitization, IS/ISO 10993 Part 5 and IS/ISO 10993 Part 10), Cl 7.5 (Biodegradability and Compostability (Optional), IS/ISO 17088.)

12493

INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)

7119305

IS 15627 (2022)

Automotive Vehicles - Pneumatic Tyres for Two and Three - Wheeled Motor Vehicles - Specification First Revision

97000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	500	-
4.1(Tyre dimension- Section Width)	-	1500	-
4.1(Tyre dimension- Outer diameter)	-	1500	-
4.6(Tread wear Indicator)	-	3500	-
4.4(Tyre strength (Plunger test))	-	10000	-
4.5(Endurance test)	-	57000	-
4.2(Load & Speed test)	-	15000	-
4.3(Dynamic growth of tyre)	-	8000	-
5(Marking)	-	500	-
4.1(Tyre dimension- Section Width)	-	1500	-
4.1(Tyre dimension- Outer diameter)	-	1500	-
4.6(Tread wear Indicator)	-	3500	-
4.4(Tyre strength (Plunger test))	-	10000	-
4.5(Endurance test)	-	57000	-
4.2(Load & Speed test)	-	15000	-
4.3(Dynamic growth of tyre)	-	8000	-
5(Marking)	-	500	-
4.1(Tyre dimension- Section Width)	-	1500	-
4.1(Tyre dimension- Outer diameter)	-	1500	-
4.6(Tread wear Indicator)	-	3500	-
4.4(Tyre strength (Plunger test))	-	10000	-
4.5(Endurance test)	-	57000	-
4.2(Load & Speed test)	-	15000	-
4.3(Dynamic growth of tyre)	-	8000	-
5(Marking)	-	500	-
4.1(Tyre dimension- Section Width)	-	1500	-
4.1(Tyre dimension- Outer diameter)	-	1500	-
4.6(Tread wear Indicator)	-	3500	-
4.4(Tyre strength (Plunger test))	-	10000	-
4.5(Endurance test)	-	57000	-
4.2(Load & Speed test)	-	15000	-
4.3(Dynamic growth of tyre)	-	8000	-

-
Included w.e.f. 23.08.2023

12494

INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)

7119305

IS 15636 (2022)

Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply

94000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	500	-
4.1(Tyre dimension- Section Width)	-	1750	-
4.1(Tyre dimension- Outer diameter)	-	1750	-
4.1.1(Tread wear Indicator)	-	3000	-
4.5(Tyre strength (Plunger test))	-	20000	-
4.2(Endurance test-Change in diameter)	-	67000	-
4.3(Load & Speed test)	-	18000	-
5(Marking)	-	500	-
4.1(Tyre dimension- Section Width)	-	1750	-
4.1(Tyre dimension- Outer diameter)	-	1750	-
4.1.1(Tread wear Indicator)	-	3000	-
4.5(Tyre strength (Plunger test))	-	20000	-
4.2(Endurance test-Change in diameter)	-	67000	-
4.3(Load & Speed test)	-	18000	-
5(Marking)	-	500	-
4.1(Tyre dimension- Section Width)	-	1750	-
4.1(Tyre dimension- Outer diameter)	-	1750	-
4.1.1(Tread wear Indicator)	-	3000	-
4.5(Tyre strength (Plunger test))	-	20000	-
4.2(Endurance test-Change in diameter)	-	67000	-
4.3(Load & Speed test)	-	18000	-
5(Marking)	-	500	-
4.1(Tyre dimension- Section Width)	-	1750	-
4.1(Tyre dimension- Outer diameter)	-	1750	-
4.1.1(Tread wear Indicator)	-	3000	-
4.5(Tyre strength (Plunger test))	-	20000	-
4.2(Endurance test-Change in diameter)	-	67000	-
4.3(Load & Speed test)	-	18000	-

-
Included w.e.f. 23.08.2023

12495

INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)

7119305

IS 15633 (2022)

Automotive vehicles - pneumatic tyres for passenger car vehicles - diagonal and radial ply

95500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	500	-
4.1(Tyre dimension- Section Width)	-	1500	-
4.1(Tyre dimension- Outer diameter)	-	1500	-
4.5(Tread wear Indicator)	-	3500	-
4.6(Tyre strength (Plunger test))	-	10000	-
4.3(Endurance test)	-	57000	-
4.2(Load & Speed test)	-	15000	-
4.4(Bead Unseating Resistance)	-	6500	-
5(Marking)	-	500	-
4.1(Tyre dimension- Section Width)	-	1500	-
4.1(Tyre dimension- Outer diameter)	-	1500	-
4.5(Tread wear Indicator)	-	3500	-
4.6(Tyre strength (Plunger test))	-	10000	-
4.3(Endurance test)	-	57000	-
4.2(Load & Speed test)	-	15000	-
4.4(Bead Unseating Resistance)	-	6500	-
5(Marking)	-	500	-
4.1(Tyre dimension- Section Width)	-	1500	-
4.1(Tyre dimension- Outer diameter)	-	1500	-
4.5(Tread wear Indicator)	-	3500	-
4.6(Tyre strength (Plunger test))	-	10000	-
4.3(Endurance test)	-	57000	-
4.2(Load & Speed test)	-	15000	-
4.4(Bead Unseating Resistance)	-	6500	-

-
Included w.e.f. 23.08.2023

12496

DELHI TEST HOUSE, Azadhpur

8131406

IS 285 (1992)

Laundry soaps - Specification (Third Revision)

10000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Phenolic substances, IS 286)	-	1000	For BIS samples: 1.5 times of BIS testing charges,
5.4, Table-1 (i) Type-1 (Pure soap)(Total fatty matter, IS 286)	-	1000	For BIS samples: 1.5 times of BIS testing charges,
5.4, Table-1 (i) Type-2 (Built soap) Gr-2(Total fatty matter, IS 286)	-	1000	For BIS samples: 1.5 times of BIS testing charges,
5.4, Table-1 (ii) (Rosin acids, percent by mass of total fatty matter, IS 286 )	-	1000	For BIS samples: 1.5 times of BIS testing charges,
5.4, Table-1 (iii) (Unsaponified fatty matter, IS 286)	-	1000	For BIS samples: 1.5 times of BIS testing charges,
5.4, Table-1 (iv) (Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-	500	For BIS samples: 1.5 times of BIS testing charges,
5.4, Table-1 (v) Type-1 (Pure soap)(Matter insoluble in alcohol, IS 286)	-	500	For BIS samples: 1.5 times of BIS testing charges,
5.4, Table-1 (v) Type-2 (Built soap) Gr-1(Matter insoluble in alcohol, IS 286)	-	500	For BIS samples: 1.5 times of BIS testing charges,
5.4, Table-1 (v) Type-1 (Pure soap)(Matter insoluble in alcohol, IS 286)	-	500	For BIS samples: 1.5 times of BIS testing charges,
5.4, Table-1 (v) Type-2 (Built soap) Gr-1(Matter insoluble in alcohol, IS 286)	-	500	For BIS samples: 1.5 times of BIS testing charges,
5.4, Table-1 (vi) Type-1 (Pure soap)(Titre of total fatty acids, IS 286)	-	500	For BIS samples: 1.5 times of BIS testing charges,
5.4, Table-1 (vii) Type-1 (Pure soap)(Glycerol, IS 286)	-	500	For BIS samples: 1.5 times of BIS testing charges,
5.4, Table-1 (viii) Type-1 (Pure soap)(Chloride (as sodium chloride), IS 286)	-	500	For BIS samples: 1.5 times of BIS testing charges,
5.4, Table-1 (viii) Type-2 (Built soap) Gr-1 & Gr-2(Chloride (as sodium chloride), IS 286)	-	500	For BIS samples: 1.5 times of BIS testing charges,
5.4, Table-1 (i) Type-2 (Built soap) Gr-1(Total fatty matter, IS 286)	-	500	For BIS samples: 1.5 times of BIS testing charges,
5.4, Table-1 (ix) Type-2 (Built soap) Gr-2(LSD/NSD content, IS 4955)	-	500	For BIS samples: 1.5 times of BIS testing charges,

17 Jun, 2027

-
-

12497

DELHI TEST HOUSE, Azadhpur

8131406

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1000	NA
4.2(Tapes – Width IS 6192 and IS 11197)	-	100	NA
4.3(Sacks)	-	100	NA
4.3.1(Bottom Seam)	-	100	NA
4.3.2(Mouth)	-	100	NA
4.4 and Table 1 i(Capacity)	-	100	NA
5.2 and Table 1 ii a(Dimensions Inside Length)	-	100	NA
5.2 and Table 1 ii b(Dimensions Inside Width)	-	100	NA
5.2 and Table 1 iii(Ends per dm )	-	100	NA
5.2 and Table 1 iv(Picks per dm )	-	100	NA
5.1 and Table 1 v(Mass of sack )	-	200	NA
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1000	NA
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1000	NA
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1000	NA
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	1000	NA
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	1000	NA
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	8000	NA
5.2 and Table 1 x(Ash content )	-	800	NA

17 Jun, 2027

-
For finished product

12498

DELHI TEST HOUSE, Azadhpur

8131406

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

5000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.5000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	250	For BIS samples 1.5 times of BIS testing charges
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	500	For BIS samples 1.5 times of BIS testing charges
cl 2.2.2(Dimensions)	-	500	For BIS samples 1.5 times of BIS testing charges
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	500	For BIS samples 1.5 times of BIS testing charges

17 Jun, 2027

-
-

12499

DELHI TEST HOUSE, Azadhpur

8131406

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

14750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2(DIMENSIONS & TOLERANCES )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
7.2(DIMENSIONS & TOLERANCES )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
7.3(DIMENSIONS & TOLERANCES )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
7.4(DIMENSIONS & TOLERANCES )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
8.1(WORKMANSHIP AND FINISH )	-	250	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
8.3(WORKMANSHIP AND FINISH )	-	250	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
10.1.1(MOISTURE CONTENT)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
10.1.2, 10.1.2.1 (Table-1)(GLUE ADHESION IN DRY STATE)	-	750	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
10.1.2, 10.1.2.2(GLUE ADHESION IN DRY STATE)	-	750	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
10.1.3, 10.1.3.1.2(RESISTANCE TO WATER TEST)	-	750	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
10.1.3, 10.1.3.1.1 (Table-1)(RESISTANCE TO WATER TEST)	-	750	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
10.1.4(RESISTANCE TO WATER TEST)	-	750	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
10.1.5, 10.1.5.1 (Table-1)(MYCOLOGICAL TEST )	-	3000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
10.1.5.2(Chem)(MYCOLOGICAL TEST )	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
10.1.6(TENSILE STRENGTH)	-	750	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
10.1.7 (Table-2)(STATIC BENDING STRENGTH)	-	1500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
10.1.8 (Table-3)(WET BENDING STRENGTH)	-	1500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-
10.1.9(RETENTION OF PRESERVATIVE)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/-

17 Jun, 2027

-
-

12500

DELHI TEST HOUSE, Azadhpur

8131406

IS 11884 (1986)

Specification for fire - Resistant brattice sheeting made from unsupported plastics

8250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Thickness)	-	250	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8250.00
3.3(Width)	-	250	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8250.00
3.5.1(Breaking Load and elongation at Break)	-	1500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8250.00
3.5.1(Elongation at Break)	-	500	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8250.00
3.5.2(Tear strength)	-	1000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8250.00
3.5.3(Fire Resistance)	-	2000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8250.00
3.5.4(Electrical Resistance Test)	-	3000	For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8250.00

17 Jun, 2027

-
-

12501

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

All grades except X02Cr24Ni22Mo7N & X02Cr24Ni17Mo4Mn6N

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	750	-
Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.12(Corrosion Resistance- IS 10461(Part1))	-	5000	-
Cl.12(Corrosion Resistance- IS 10461(Part2))	-	5000	-
6(Freedom from defects , IS 6911)	-	500	-
10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1))	-	5000	-
10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-	1000	-
10.3(Bend Test - IS 1599)	-	1000	-
11,Table 7(Erichsen cupping test-IS 10175)	-	5000	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	5000	-
10.1 Amd 2(Elongation)	-	5000	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	1000	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	1000	-
Clause 17 , Table 9 to Table 19(Camber)	-	1000	-
Clause 17 , Table 9 to Table 19(Flatness)	-	1000	-
10.1 Amd 2(Yeild Strength)	-	5000	-

18 Dec, 2027

-
Included w.e.f. 19.05.2023.

12502

BIS, Northern Regional Laboratory (NRL)

None

IS 12615 (2018)

Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification" (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
15.2 (Rating)	-
18.3 (BIS Certification Marking )	-
8.0 (Earthing)	-
9.0 (Terminal Marking)	-
11.0 (DUTY AND RATING)	-
18.3 (Marking)	-
16.2.1 (Dimensions)	-
16.1.1 (Insulation Resistance Test)	-
16.1.2 (Measurement of Resistance of Windings of Stator)	-
16.1.3 (No Load Test)	-
16.1.4 (Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-
16.1.5 (5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-
16.1.6 (High Voltage Test)	-
16.2.2 (Locked Rotor Test)	-
16.2.2.3 (Determination of starting characteristics -locked rotor current)	-
16.2.2.3.1 (Direct proportion method)	-
16.2.3 (Full Load Test to Determine Efficiency, Power Factor and Slip)	-
16.2.4 (Temperature Rise Test)	-
16.2.5 (Momentary Overload Test)	-

-
Excluding For rating above 1 kW and optional test for all rating

12503

BIS, Central Laboratory (CL)

None

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
"Cl. 6 IS 4159:2021" (Classification)	-
"Cl. 8 IS 4159:2021" (Protection against access to live parts)	-
"Cl. 9 IS 4159:2021" (Starting of motor operated appliances)	-
"Cl. 11 IS 4159:2021" (Heating)	-
"Cl. 13 IS 4159:2021" (Leakage Current & Electrical Strength at Operating Temperature)	-
"Cl. 15 IS 4159:2021" (Moisture Resistance)	-
"Cl. 16 IS 4159:2021" (Leakage Current and Electric strength)	-
"Cl. 14 IS 4159:2021" (Transient Over Voltage)	-
"Cl. 17 IS 4159:2021" (Overload protection of transformers and associated circuits.)	-
"Cl. 18 IS 4159:2021" (Endurance)	-
"Cl. 19 IS 4159:2021" (Abnormal Operation)	-
"Cl. 20 IS 4159:2021" (Stability and mechanical Hazards)	-
"Cl. 21 IS 4159:2021" (Mechanical Strength)	-
"Cl. 22 IS 4159:2021" (Construction)	-
"Cl. 23 IS 4159:2021" (Internal Wiring)	-
"Cl. 24 IS 4159:2021" (Components)	-
"Cl. 25 IS 4159:2021" (Supply Connections and External Flexible Cables and Cords)	-
"Cl. 26 IS 4159:2021" (Terminal For External Conductors)	-
"Cl. 27 IS 4159:2021" (Provision For Earthing)	-
"Cl. 30 IS 4159:2021" (Resistance To Heat, Fire And Tracking)	-
"Cl. 31 IS 4159:2021" (Resistance To Rusting)	-
"Cl. 102 IS 4159:2021" (Leakage and hydrostatic strength (for oil heating elements))	-

-
Complete except oil heating element

12504

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	10000	-
5.2(Message Readability)	-	15000	-
6(Marking)	-	5000	-

18 Dec, 2027

-
-

12505

UL India Private limited, Gurgaon

8127226

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

31350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	15000	NA
5.2(Message Readability)	-	15000	NA
6(Marking)	-	1350	NA
5.1(Inputting of text)	-	-	-
5.2(Message Readability)	-	-	-
6(Marking)	-	-	-

-
-

12506

BIS, Western Regional Laboratory (WRL)

None

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

Rs.8330/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Classification- IS 302-1 )	-
6 (Classification- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.3 (Marking- IS 302-1)	-
7.4 (Marking- IS 302-1)	-
7.6 (Marking- IS 302-1)	-
7.7 (Marking- IS 302-1)	-
7.8 (Marking- IS 302-1)	-
7.11 (Marking- IS 302-1)	-
7.12 (Marking- IS 302-1)	-
7.13 (Marking- IS 302-1)	-
7.14 (Marking- IS 302-1)	-
7.15 (Marking- IS 302-1)	-
7.101 (Marking)	-
8 ( Protection Against Electric Shock, IS 302-1)	-
10 (Power Input and Current, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
14 (Transient Over Voltages, IS 302-1)	-
15.1 (Moisture Resistance, IS 302-1)	-
15.2 (Moisture Resistance, IS 302-1)	-
15.3 (Moisture Resistance, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
19.4 (Abnormal Operation, IS 302-1)	-
19.4 (Abnormal Operation, IS 302-1)	-
19.7 (Abnormal Operation)	-
19.9 (Abnormal Operation)	-
19.1 (Abnormal Operation)	-
19.101 (Abnormal Operation)	-
20.1 (Stability & Mechanical Hazards, IS 302-1)	-
20.2 (Stability & Mechanical Hazards, IS 302-1)	-
21.1 (Mechanical Strength, IS 302-1)	-
21.2 (Mechanical Strength, IS 302-1)	-
21.101 (Mechanical Strength, IS 302-2-3)	-
22.101 (Construction)	-
22 (Construction, IS 302-1)	-
22.102 (Construction)	-
22.103 (Construction)	-
22.104 (Construction)	-
22.105 (Construction)	-
22.106 (Construction)	-
22.107 (Construction)	-
23.1 (Internal Wiring, IS 302-1)	-
23.2 (Internal Wiring, IS 302-1)	-
23.3 (Internal Wiring, IS 302-1)	-
23.4 (Internal Wiring, IS 302-1)	-
23.5 (Internal Wiring, IS 302-1)	-
23.6 (Internal Wiring, IS 302-1)	-
23.7 (Internal Wiring, IS 302-1)	-
23.8 (Internal Wiring, IS 302-1)	-
23.9 (Internal Wiring, IS 302-1)	-
23.10 (Internal Wiring, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.2 (Components, IS 302-1)	-
24.4 (Components, IS 302-1)	-
24.5 (Components, IS 302-1)	-
24.6 (Components, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.5 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.6 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.7 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.8 (Supply Connection and External Flexible Cords, IS 302-1)	-
26.9 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.11 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.12 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.13 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.15 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.16 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.17 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.18 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.19 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.2 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.21 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.22 (Supply Connection and External Flexible Cords, IS 302-1)	-
26 (Terminals for External Conductors, IS 302-1)	-
27.1 (Provision for Earthing, IS 302-1)	-
27.2 (Provision for Earthing, IS 302-1)	-
27.3 (Provision for Earthing, IS 302-1)	-
27.4 (Provision for Earthing, IS 302-1)	-
27.5 (Provision for Earthing, IS 302-1)	-
28 (Screws & Connections, IS 302-1)	-
29.1 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
29.2 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
30.1 (Resistance to Heat, Fire & Tracking, IS 302-1)	-
30.2 (Resistance to Heat, Fire & Tracking, IS 302-1)	-
31 (Resistance of Rusting, IS 302-1)	-
32 (Radiation, Toxicity and similar Hazard IS 302-1)	-

-
The following test facilities for clauses are not available: 1. Cl 24.1.2 TF for switch endurance of steam iron 2. Clause 24 Components

12507

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	7000	10% Discount for BIS
5.2(Message Readability)	-	7000	10% Discount for BIS
6(Marking)	-	1000	10% Discount for BIS

14 Nov, 2027

-
-

12508

BIS, Eastern Regional Laboratory (ERL)

None

IS 4296 : Part 2 (2015)

Tools for pressing: Part 2 punches with cylindrical head and straight or reduced shank (First Revision)

For all types

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Dimensions & Tolerance)	-
5.2 (Hardness (HRC))	-
4 (Surface Roughness)	-
5 (Material Testing)	-

-
Complete

12509

BIS, Eastern Regional Laboratory (ERL)

None

IS 13983 (1994)

Stainless Steel Sinks For Domestic Purposes

Rs.14635/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Type)	-
6 (Thickness of sheet/strip)	-
6 (Depth of bowl)	-
6 (Internal dimensions of the bowl)	-
6 (Bowl locating limits)	-
6 (Co-ordinating sizes)	-
7.1 (Consruction and workmanship)	-
7.1.1 (Consruction and workmanship)	-
7.2 (Consruction and workmanship)	-
7.3 (Drainers)	-
7.4 (Waste outlet)	-
7.5 (Tap holes)	-
7.6 (Overflows)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Carbon Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Silicon Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Manganese Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Phouphorous Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Sulphur Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Nickel Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Chromium Content)	-
Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Nitrogen Content)	-

-
Excluding C(<0.05%), Mo(>1.5%)

12510

LABORATORY, TEXTILES COMMITTEE, MUMBAI

7149904

IS 15852 (2009)

Textiles – Polyester blended woven shirting for uniforms

16050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	200	Excluding GST
4.1, Table 1,ii)(Length,m)	-	150	Excluding GST for both length & width
4.1, Table 1,iii)(Overall widthc m)	-	150	Excluding GST for both length & width
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	200	Excluding GST
4.1, Table 1,v)(v) Mass, g/m2)	-	200	Excluding GST
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	550	Excluding GST
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	550	Excluding GST
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	400	Excluding GST
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	800	Excluding GST
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	7100	Excluding GST After 30 wash cycles
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	1800	Excluding GST
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	500	Excluding GST
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	300	Excluding GST
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	500	Excluding GST
4.1, Table 1,xvii)(pH value of aqueous extract)	-	300	Excluding GST
4.1 Table 1-(xvii)(a) Light (change in colour ))	-	1500	Excluding GST
Cl. 4.1(table 1- xvii)(b) Washing: Test 2: I) Change in colour 2) Staining of adjacent fabrics)	-	250	Excluding GST
4.1(table 1- xvii)(Dry-heat (change in colour))	-	500	Excluding GST
4.1(table 1- xvii)(Perspiration (acidic and alkaline ): I) Change in colour 2) Staining of adjacent fabric)	-	500	Excluding GST
4.1(table 1- xvii)(Rubbing: I) Dry 2) Wet)	-	250	Excluding GST
4.1(table 1- xvii)(Hot pressing: I) Change in colour 2) Staining of adjacent fabrics)	-	500	Excluding GST

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number