BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14026 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

12541

AADCO TESTING & RESEARCH LABORATORY PVT LTD (F28), GHAZIABAD

8141606

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

3350 View breakup
Rs.3350/- for Mechanical + Chemical (10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	300	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	300	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	300	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	250	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	250	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	225	-
7 -Table 2- i(Fineness 4031 Part 2)	-	200	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	200	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	250	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	150	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	200	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	150	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	150	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	200	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	225	-

26 Jul, 2027

-
Except Transverse Strength

12542

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 16046 (2015)

Secondary Cells and Batteries Containing Alkaline or Other Non-acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made from them, for Use in Portable Applications ( First Revision )

- View breakup
Rs. 132000/- for Nickel cells, Rs.89000/- for Nickel battery Rs.91000/- for Lithium cells, Rs.60000/- for Lithium battery (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

14 Nov, 2027

-
-

12543

Matrix Test Labs

8138626

IS 16046 (2015)

- View breakup
Rs.1,80,000/- [10% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
Transport test (Cl.8.3.8) based on manufacturer’s documents to demonstrate compliance.

12544

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 16046 (2015)

- View breakup
Rs.60,000/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
-

12545

National Test House (NR) - NTH, Ghaziabad

8101304

IS/IEC 60898 : PART 1 (2015)

Electrical accessories - Circuit - Breakers for overcurrent protection for household and similar installations: Part 1 circuit - Breakers for a.c. operation (First Revision)

0.5-125A,210-460V,SP,DP,TP,FP TPN MCBs

450000 View breakup
Upto 32A-Rs.300000 for single pole, Rs.300000 for double pole, Rs.400000 for three pole, Rs.450000 for four pole Upto 63A-Rs.350000 for single pole, Rs.400000 for double pole, Rs.450000 for three pole, Rs.500000 for four pole Upto 125A-Rs.530000 for single pole, Rs.580000 for double pole, Rs.680000 for three pole, Rs.710000 for four pole.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Classification, IS 60898-1)	-	500	Rs500/- for all Classification Parameter
4.3(Classification, IS 60898-1)	-	0	Rs500/- for all Classification Parameter
4.4(Classification, IS 60898-1)	-	0	Rs500/- for all Classification Parameter
4.5(Classification, IS 60898-1)	-	0	Rs500/- for all Classification Parameter
4.5.1(Classification, IS 60898-1)	-	0	Rs500/- for all Classification Parameter
4.5.2(Classification, IS 60898-1)	-	0	Rs500/- for all Classification Parameter
4.6(Classification, IS 60898-1)	-	0	Rs500/- for all Classification Parameter
4.7(Classification, IS 60898-1)	-	0	Rs500/- for all Classification Parameter
6(Marking and other product information, IS 60898-1)	-	500	-
8.1.1(General, IS 60898-1)	-	500	-
8.1.2(Mechanism, IS 60898-1)	-	500	-
8.1.3(Clearances and creepage distances, IS 60898-1)	-	500	-
8.1.4.1(Reliability of Screws current carrying parts and connections IS 60898-1)	-	1000	Rs1000/- for all Reliability of Screws current carrying parts and connections Parameter
8.1.4.2(Reliability of Screws current carrying parts and connections IS 60898-1)	-	0	Rs1000/- for all Reliability of Screws current carrying parts and connections Parameter
8.1.4.3(Reliability of Screws current carrying parts and connections IS 60898-1)	-	0	Rs1000/- for all Reliability of Screws current carrying parts and connections Parameter
8.1.4.4(Reliability of Screws current carrying parts and connections IS 60898-1)	-	0	Rs1000/- for all Reliability of Screws current carrying parts and connections Parameter
8.1.5.1(Reliability of terminals for external conductors, IS 60898-1)	-	1000	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.2(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.3(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.4(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.5(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.6(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.7(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.8(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.9(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.10(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.11(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.1.5.12(Reliability of terminals for external conductors, IS 60898-1)	-	0	Rs1000/- for all Reliability of terminals for external conductors, Parameter
8.2(Protection against Electric Shock, IS 60898-1)	-	1000	-
8.3.2(Dielectric strength at power frequency, IS 60898-1)	-	500	-
8.3.3(Isolating capability, IS 60898-1)	-	1000	-
8.3.4(Dielectric strength at rated impulse withstand voltage ( Uimp), IS 60898-1)	-	5000	-
8.4(Temperature-rise, IS 60898-1)	-	5000	-
8.5(Uninterrupted duty, IS 60898-1)	-	1000	-
8.6(Automatic operation, IS 60898-1)	-	1000	-
8.7(Mechanical and electrical endurance, IS 60898-1)	-	40000	-
8.8(Performance at short-circuit currents, IS 60898-1)	-	45000	-
8.9(Resistance to mechanical shock and impact, IS 60898-1)	-	1000	-
8.1(Resistance to heat, IS 60898-1)	-	1000	-
8.11(Resistance to abnormal heat and to fire, IS 60898-1)	-	1500	-
8.12(Resistance to rusting, IS 60898-1)	-	1000	-
8.13(Power loss, IS 60898-1)	-	500	-
9.3(Test of indelibility of marking, IS 60898-1)	-	500	-
9.4(Test of reliability of screws, current-carrying parts and connections, IS 60898-1)	-	1000	Rs1000/- for all test of reliability of screws, current-carrying parts and connections, Parameter
9.5.1(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	0	Rs1000/- for all test of reliability of screws, current-carrying parts and connections, Parameter
9.5.2(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	0	Rs1000/- for all test of reliability of screws, current-carrying parts and connections, Parameter
9.5.3(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	1000	Rs1000/- for all test of reliability of screw-type terminals for external copper conductors,, Parameter
9.5.4(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	0	Rs1000/- for all test of reliability of screw-type terminals for external copper conductors,, Parameter
9.6(Test of protection against electric shock, IS 60898-1)	-	500	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.1(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.2(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.3(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.4(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.5.1(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.5.2(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.5.3(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.7.5.4(Test of protection against electric shock, IS 60898-1)	-	0	Rs500/- for all test of Test of protection against electric shock, Parameter
9.8(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	5000	Rs5000/- for all Test of temperature-rise and measurement of power loss, Parameter
9.8.5(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	0	Rs5000/- for all Test of temperature-rise and measurement of power loss, Parameter
9.9(28- day test, IS 60898-1)	-	45000	-
9.10.2(Test of tripping characteristic, IS 60898-1)	-	55000	Rs55000/- for all Test of tripping characteristic,, Parameter
9.10.3(Test of tripping characteristic, IS 60898-1)	-	0	Rs55000/- for all Test of tripping characteristic,, Parameter
9.10.4(Test of tripping characteristic, IS 60898-1)	-	0	Rs55000/- for all Test of tripping characteristic,, Parameter
9.10.5(Test of tripping characteristic, IS 60898-1)	-	0	Rs55000/- for all Test of tripping characteristic,, Parameter
9.11(Verification of mechanical and electrical endurance, IS 60898-1)	-	30000	-
9.12(Short- Circuit tests, IS 60898-1)	-	75000	-
9.13.1(Mechanical Stress, IS 60898-1)	-	1000	-
9.13.2.2(Mechanical Stress, IS 60898-1)	-	0	-
9.13.2.3(Mechanical Stress, IS 60898-1)	-	0	-
9.13.2.4(Mechanical Stress, IS 60898-1)	-	0	-
9.13.2.5(Mechanical Stress, IS 60898-1)	-	0	-
9.14.1(Test of resistance to heat, IS 60898-1)	-	1000	-
9.14.3(Test of resistance to heat, IS 60898-1)	-	0	-
9.15(Resistance to abnormal heat and to fire)	-	1500	-
9.16(Test of resistance to rusting)	-	1000	-

26 Oct, 2025

-
REVISED 2015 Version Included w.e.f. 20.08.2019.

12546

HPCL, Vashi QC Laboratory, Navi Mumbai

7161816

IS 15607 (2016)

Biodiesel (B100) - Fatty acid methyl esters (Fame) - Specification (First Revision)

1 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Polyunsaturated (>4 double bonds) methyl ester - EN 15779)	-	1	-
4.4(Linolenic acid methyl ester - EN14103)	-	1	-
5.4(CFPP - ASTM D6371 / EN 16329 / IS 1448 P:110 b) Winter)	-	1	-
4.4(CFPP - ASTM D6371 / EN 16329 / IS 1448 P:110 a) Summer)	-	1	-
4.4(Oxidation stability, at 110°C - EN 14112 / EN 15751)	-	1	-
4.4(Iodine value - EN 14111)	-	1	-
4.4(Calcium +Magnesium - EN14538)	-	1	-
4.4(Sodium + Potassium - EN14538)	-	1	-
4.4(Phosphorous - ASTM D4951 / EN 14107)	-	1	-
4.4(Total Glycerol - ASTM D6584 / EN 14105)	-	1	-
4.4(Free Glycerol - ASTM D6584 / EN 14105)	-	1	-
4.4(Triglyceride content - ASTM D6584 / EN 14105)	-	1	-
4.4(Diglyceride content - ASTM D6584 / EN 14105)	-	1	-
4.4(Monoglyceride content - ASTM D6584 / EN 14105)	-	1	-
4.4(Ester content - EN 14103)	-	1.03	-
4.4(Methanol - EN 14110)	-	1	-
4.4(Acid value - IS 1448 P:17)	-	1	-
4.4(Cetane No. - IS 1448 P:9 / ISO 5165)	-	1	-
4.4(Copper corrosion - IS 1448 P:15 / ISO 2160)	-	1	-
4.4(Total contamination - EN 12662)	-	1	-
4.4(Water content - IS 1448 P:40 / ISO 3733/ ISO 12937)	-	1	-
4.4(Sulfated ash - ISO 3987)	-	1	-
4.4(Carbon Residue (Ramsbottom) - ASTM D 4530 / ISO 10370)	-	1	-
4.4(Sulphur - ISO 20846 / ASTM D5453)	-	1	-
4.4(Flash point (PMCC) - IS 1448 P:21 )	-	1	-
4.4(Kinematic viscosity at 40°C - IS 1448 P:25/ ISO3104)	-	1	-
4.4(Density at 15 oC - IS 1448 P:16/ ISO 3675/ ISO 12185/ ASTM D4052)	-	1	-

23 Aug, 2027

-
-

12547

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7(Verification)	-	500	15 % Discount to BIS
Cl.8(Verification)	-	500	15 % Discount to BIS
Cl.10(Verification)	-	1000	15 % Discount to BIS
Cl.11(Verification)	-	1000	15 % Discount to BIS
Cl.13(Verification)	-	1500	15 % Discount to BIS
Cl.14(Verification)	-	500	15 % Discount to BIS
Cl.15(Verification)	-	1500	15 % Discount to BIS
Cl. 16(Verification)	-	500	15 % Discount to BIS
Cl.17(Verification)	-	500	15 % Discount to BIS
Cl.19(Verification)	-	500	15 % Discount to BIS
Cl.20(Verification)	-	500	15 % Discount to BIS
Cl.21(Verification)	-	500	15 % Discount to BIS
Cl.22(Verification)	-	500	15 % Discount to BIS
Cl.23(Verification)	-	500	15 % Discount to BIS
Cl.24(Verification)	-	500	15 % Discount to BIS
Cl.25(Verification)	-	500	15 % Discount to BIS
Cl.26(Verification)	-	500	15 % Discount to BIS
Cl.27(Verification)	-	500	15 % Discount to BIS
Cl.28(Verification)	-	500	15 % Discount to BIS
CL.29(Verification)	-	500	15 % Discount to BIS
Cl.30(Verification)	-	1000	15 % Discount to BIS
Cl.31(Verification)	-	500	15 % Discount to BIS
Cl.32(Verification)	-	500	15 % Discount to BIS

31 Dec, 2026

-
REVISED STANDARD INCLUDED FOR IS 302-2-35:2017 W.E.F. 10-09-2020.

12548

Matrix Test Labs

8138626

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

100000 View breakup
Rs. 75,000/- (For Electronic games (Video), Electronic musical system with input power 200W and above, Power adopters for audio, video & similar electronic apparatus). Rs.1,00,000/- (For Plasma/LCD/LED TV of screen size up to 75". Additional Products). Rs.75,000/- (For Amplifiers with input power 2000W and above, Optical Disc Players with built in amplifiers of input power 200W and above). Rs.1,00,000/- (For Plasma/LCD/LED TV of screen size up to 32"). Rs.75000/- (for Wireless Headphone & Earphone) Rs.75000/- (for Electronic Musical System with input power below 200W) Rs.10000/- (for Television other than plasma/LCD/LED/TVS. Additonal Products Included For Phase V). Rs.75000/- (for Microphone. Video camera, Webcam (finished product), Smart Speakers (with and without display), Bluetooth speakers).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	5000	10% discount to BIS
7(Heating under normal operating conditions)	-	10000	10% discount to BIS
8(Constructional requirements with regard to the protection against electric shock)	-	15000	10% discount to BIS
9(Electric shock hazard under normal operating conditions)	-	10000	10% discount to BIS
10(Insulation requirements)	-	10000	10% discount to BIS
11(Fault conditions)	-	10000	10% discount to BIS
12(Mechanical strength)	-	15000	10% discount to BIS
13(CLEARANCES and CREEPAGE DISTANCES)	-	10000	10% discount to BIS
15(TERMINALS)	-	10000	10% discount to BIS
16(External flexible cords)	-	5000	10% discount to BIS
17(Electrical connections and mechanical fixings)	-	10000	10% discount to BIS
19(Stability and mechanical hazards)	-	10000	10% discount to BIS
20(Resistance to fire)	-	10000	10% discount to BIS
14(Components)	-	15000	10% discount to BIS

31 Dec, 2026

-
REVISED VERSION IS 616:2017 and Additional Products included w.e.f. 18.09.2018. Excluding: Ionizing radiation test (Cl.6.1), Laser radiation (Cl.6.2), Endurance test for wound components with insulated winding wires without additional interleaved insulation (Cl.8.17), Printed Boards (Cl.13.5), Component test (Cl.14), Plugs & Sockets (Cl.15.1), Mechanical strength of picture tubes & protection against the effect of implosion (Cl.18).

12549

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

95000 View breakup
Rs 1,00,000/- for • Optical Disc Players with built in amplifiers of input power 200W and above • Amplifiers with input power 2000W and above • Electronic Musical Systems with input power 200W and above • Plasma/LCD/LED Televisions of screen size upto 90” Rs. 60,000/- for • Electronic Games (Video) • Power Adaptors for Audio, Video & Similar Electronic Apparatus [10% discount to BIS]. ADDITIONAL PRODUCTS INCLUDED W.E.F. 28-08-2020: Rs.25000/- for Wireless headphone & earphone, Rs.75000/- Television other than plasma/LCD/LED/TVs, Electronic Musical system with input power below 200 Watts. PRODUCTS INCLUDED FOR PHASE V W.E.F. 01-02-2021: Wireless Microphone : Rs. 45000/- Video Camera : Rs. 95000/- WebCam(Finished Product) : Rs. 45000/- Smart Speaker (With and Without Display) : Rs. 60000/-(10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	5000	10% Discount offered to BIS
7(Heating under normal operating conditions)	-	10000	10% Discount offered to BIS
8(Constructional requirements with regard to the protection against electric shock)	-	10000	10% Discount offered to BIS
9(Electric shock hazard under normal operating conditions)	-	5000	10% Discount offered to BIS
10(Insulation requirements)	-	10000	10% Discount offered to BIS
11(Fault conditions)	-	15000	10% Discount offered to BIS
12(Mechanical strength)	-	20000	10% Discount offered to BIS
13(CLEARANCES and CREEPAGE DISTANCES)	-	10000	10% Discount offered to BIS
15(TERMINALS)	-	10000	10% Discount offered to BIS
16(External flexible cords)	-	5000	10% Discount offered to BIS
17(Electrical connections and mechanical fixings)	-	5000	10% Discount offered to BIS
19(Stability and mechanical hazards)	-	10000	10% Discount offered to BIS
20(Resistance to fire)	-	10000	10% Discount offered to BIS

05 Apr, 2027

-
-

12550

Nextron International Lab Private Limited

9140226

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

50000 View breakup
Rs. 50,000/- (for each sample): Electronic Games (Video), Optical disc Players with built in amplifier of input power 200W and above, Amplifier of input power 2000W and above, Electronic musical system with input power 200W and above, Power adaptors for audio, Video and similar electronic apparatus, Plasma/ LED/LCD television screen size 32 inch, , Plasma/ LED/LCD television screen up to 32 inch, wireless headphone and earphone, Electronic musical system with input power below 200watts, television other than Plasma/ LED/LCD TVs, wireless microphone, Video camera, Webcam (finished product), Bluetooth speaker. (10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	4000	-
7(Heating under normal operating conditions)	-	5000	-
8(Constructional requirements with regard to the protection against electric shock)	-	4000	-
9(Electric shock hazard under normal operating conditions)	-	4000	-
10(Insulation requirements)	-	8000	-
11(Fault conditions)	-	3000	-
12(Mechanical strength)	-	3000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	5000	-
15(TERMINALS)	-	2000	-
16(External flexible cords)	-	2000	-
17(Electrical connections and mechanical fixings)	-	2000	-
19(Stability and mechanical hazards)	-	5000	-
20(Resistance to fire)	-	3000	-

06 Jun, 2027

-
REVISED VERSION (IS 616:2017) Included w.e.f. 23.07.2018. Exclusion of following test:lonizing radiation test (CI.6.1), Laser radiation (C1.6.2), Requirements for insulated winding wires for use without additional interleaved insulation (C1.8.16), Endurance test for wound components with insulated winding wires without additional interleaved insulation (C1.8.17), Printed Boards(Cl.13.5), Component (Cl.14), Plugs & Sockets (CI.15.1.1 to Cl.15.1.3), External flexible cord (C1.16.1, Cl.16.3 & 16.5), Mechanical strength of picture tubes & Protection against the effect of implosion (Cl.18), Internal wiring (CL.20.2.3), Printed Boards (CL.20.2.4), Components and parts (C1.20.2).

12551

Aforeserve Labs Private Limited, Gurugram

9140626

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

35000 View breakup
Rs.35,000/- for Electronics games (Video), Plasma/LCD/LED Televisions up to and including 32", Optical disc players with built in amplifiers of input power 200W and above, Electronic musical system with input powers 200W and above, Power adaptors for audio, video & similar electronic apparatus, Amplifiers with input power 2000W and above, Plasma/LCD/ LED televisions of screen size 32" and above up to 55", Wireless headphone & Earphone, Electronic Musical system with input power below 200 Watts, Television other than Plasma/LCD/LED/TVs, Wireless Microphone Video Camera Webcam(Finished Product) Smart Speakers (with and without display) Bluetooth Speakers. [10% Discount to BIS ]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2500	10% discount to BIS
6(Hazardous radiations)	-	2500	10% discount to BIS
7(Heating under normal operating conditions)	-	2500	10% discount to BIS
8(Constructional requirements with regard to the protection against electric shock)	-	2500	10% discount to BIS
9(Electric shock hazard under normal operating conditions)	-	2500	10% discount to BIS
10(Insulation requirements)	-	2500	10% discount to BIS
11(Fault conditions)	-	2500	10% discount to BIS
12(Mechanical strength)	-	2500	10% discount to BIS
13(CLEARANCES and CREEPAGE DISTANCES)	-	2500	10% discount to BIS
15(TERMINALS)	-	2500	10% discount to BIS
16(External flexible cords)	-	2500	10% discount to BIS
17(Electrical connections and mechanical fixings)	-	2500	10% discount to BIS
19(Stability and mechanical hazards)	-	3000	10% discount to BIS
20(Resistance to fire)	-	2000	10% discount to BIS
14(Components)	-	0	-

06 Jun, 2027

-
REVISED VERSION and Additional Products included w.e.f. 02.04.2019 Insulated winding wires for use without additional interleaved insulation (Cl.8.16), Endurance test for wound components (Cl.8.17), Test specification of no separable thin sheet material (Cl.8.21), Printed boards (Cl.13.5,20.2.4), Motor testing (Cl.14.10), Terminals for external flexible cords (Cl.15.3), Cord bend test (Cl.16.3b),Mechanical strength of picture tubes and protection againt the effect of implosion (Cl.18), Fire Enclosure (Cl.20.3,20.3.1 to 20.3.3), Plug and sockets (Cl.15.1.1, 15.1.2,15.1.3)

12552

DELHI TEST HOUSE, Azadhpur

8131406

IS 7021 (2017)

Protein - Rich food supplements for infants and pre - School children - Specification (First Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.3 Table 2(Acid insoluble Ash)	-	500	-
4.2.4(Urease activity)	-	500	-
4.3.3 Table 2(Crude Fibre)	-	500	-
4.3.3 Table 2(Total Ash)	-	500	-
4.3.3 Table 2(Coliform count)	-	500	-
4.2.2(Aflatoxin)	-	750	-
4.3.3 Table 2(Bacterial Count)	-	500	-
4.2.3(Gossypol (free gossypol Content ) )	-	500	-
4.2.5 Table 1(Thiamine )	-	750	-
4.2.5 Table 1(Riboflavin)	-	750	-
4.2.5 Table 1(Vitamin B12)	-	750	-
4.2.3(Gossypol (Total gossypol Content ) )	-	500	-
4.2.5 Table 1(Vitamin D)	-	750	-
4.2.5 Table 1(Niacin)	-	750	-
4.2.5 Table 1(Iron)	-	250	-
4.3.3 Table 2(Fat)	-	300	-
4.3.3 Table 2(Moisture)	-	500	-
4.2.1(Protein)	-	500	-
4.3.3 Table 2(Protein)	-	500	-
4.2.5 Table 1(Vitamin C)	-	750	-
4.2.5 Table 1(Folate)	-	500	-
4.2.5 Table 1(Vitamin A)	-	750	-
4.2.5 Table 1(Calcium )	-	250	-
4.3.1(Description)	-	250	-
4.3.2(Flavour)	-	200	-

17 Jun, 2027

-
-

12553

DELHI TEST HOUSE, Azadhpur

8131406

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	3000	N.A.
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	3000	N.A.
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	3000	N.A.
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	3000	N.A.
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	3000	N.A.
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	3000	N.A.
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	3000	N.A.
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	3000	N.A.
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	3000	N.A.
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	3000	N.A.
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	3000	N.A.
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	3000	N.A.
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	3000	N.A.
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	3000	N.A.
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	3000	N.A.
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	3000	N.A.
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	3000	N.A.
4.1(General)	-	100	N.A.

17 Jun, 2027

-
Included w.e.f. 15-10-2020

12554

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

7500 View breakup
Rs.Rs.3,216/-(10% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	5000	10% discount offered to BIS
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	5000	10% discount offered to BIS
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	5000	10% discount offered to BIS
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	5000	10% discount offered to BIS
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	5000	10% discount offered to BIS
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	5000	10% discount offered to BIS
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	5000	10% discount offered to BIS
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	5000	10% discount offered to BIS
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	5000	10% discount offered to BIS
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	5000	10% discount offered to BIS
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	5000	10% discount offered to BIS

05 Apr, 2027

-
-

12555

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

65000 View breakup
Rs.65000/- (5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	0	-
20.5(Classification of Luminaires')	-	0	-
20.6(Marking)	-	500	5% discount for BIS
20.7(Construction)	-	10000	5% discount for BIS
20.8(Creepage Distance and Clearances)	-	2500	5% discount for BIS
20.9(Provision for earthing)	-	2500	5% discount for BIS
20.10(Terminals)	-	2000	5% discount for BIS
20.11(External & Internal Wiring)	-	2500	5% discount for BIS
20.12(Protection against electric shock)	-	5000	5% discount for BIS
20.13(Endurance Tests and Thermal Tests)	-	5000	5% discount for BIS
20.14(Resistance to Dust & Moisture)	-	20000	5% discount for BIS
20.15(Insulation Resistance and Electric Strength)	-	10000	5% discount for BIS
20.16(Resistance to Heat , fire and tracking)	-	5000	5% discount for BIS

19 Mar, 2026

-
REVISED VERSION INCLUDED w.e.f. 10.07.2018 Excluding : (cl.20.7.4 & 6.14.2 of AnnexA)-Electrical Endurance (CBC) ( cl.20.7.4 & cl.6.14.3 of Annex-A)-Bending(Non-rewireable connector) (cl.20.7.8 & IEC 61347-2- 11)- Control Unit

12556

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.4(General Test Requireements)	-	2000	10% discount to BIS
20.5(Classification of Luminaires')	-	2000	10% discount to BIS
20.6(Marking)	-	10000	10% discount to BIS
20.7(Construction)	-	10000	10% discount to BIS
20.8(Creepage Distance and Clearances)	-	10000	10% discount to BIS
20.9(Provision for earthing)	-	10000	10% discount to BIS
20.10(Terminals)	-	10000	10% discount to BIS
20.11(External & Internal Wiring)	-	10000	10% discount to BIS
20.12(Protection against electric shock)	-	10000	10% discount to BIS
20.13(Endurance Tests and Thermal Tests)	-	20000	10% discount to BIS
20.14(Resistance to Dust & Moisture)	-	10000	10% discount to BIS
20.15(Insulation Resistance and Electric Strength)	-	10000	10% discount to BIS
20.16(Resistance to Heat , fire and tracking)	-	10000	10% discount to BIS

05 Apr, 2027

-
-

12557

DELHI TEST HOUSE, Azadhpur

8131406

IS 10633 (2017)

Vanaspati - Specification (Third Revision)

18350 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.18350/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Baudouin test)	-	300	For BIS samples: 1.5 times of BIS testing charges
5.3(non-edible oils, mineral oil, castor oil and animal fats)	-	3600	For BIS samples: 1.5 times of BIS testing charges
6.1(Colour)	-	400	For BIS samples: 1.5 times of BIS testing charges
6.2(Appearance)	-	400	For BIS samples: 1.5 times of BIS testing charges
6.3(Foreign matter)	-	1000	For BIS samples: 1.5 times of BIS testing charges
6.4(Odour and Taste)	-	500	For BIS samples: 1.5 times of BIS testing charges
6.6(Aflatoxin content)	-	1500	For BIS samples: 1.5 times of BIS testing charges
6.7(Metal contaminants and pesticide residues)	-	4250	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Moisture)	-	750	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Acid value)	-	750	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Unsaponifiable matter)	-	750	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Refractive index at 60°C)	-	750	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Synthetic vitamin A, expressed in international units (I. U.) per gram, When packed)	-	1000	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Synthetic vitamin A, expressed in international units (I. U.) per gram, At retail outlet)	-	1000	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Nickel)	-	400	For BIS samples: 1.5 times of BIS testing charges
6.9, Table 1(Trans fatty acids)	-	1500	For BIS samples: 1.5 times of BIS testing charges
7.2.3, Table 2(Pb)	-	500	For BIS samples: 1.5 times of BIS testing charges
7.2.3, Table 2(As)	-	500	For BIS samples: 1.5 times of BIS testing charges
7.2.3, Table 2(Cd)	-	500	For BIS samples: 1.5 times of BIS testing charges
7.2.3, Table 2(Hg)	-	500	For BIS samples: 1.5 times of BIS testing charges

17 Jun, 2027

-
Exclusion: 5.1 Raw material

12558

National Test House (NR) - NTH, Ghaziabad

8101304

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

7000 View breakup
For BIS samples: Rs.3420/-, for others: Rs.7000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	0	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	1000	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	500	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	500	-
Cl.12(Freedom from defects)	-	1000	-
Cl 8.2(Press)	-	1000	-
Cl 14(Length, Width & Thickness)	-	500	-
Cl 13(Weight)	-	0	-
5.1(carbon)	-	500	-
5.1(sulphur)	-	500	-
5.1(phosphorus)	-	500	-
5.1(manganese)	-	500	-
5.1(silicon )	-	500	-
5.1(Titanium)	-	500	-
5.1(nitrogen)	-	500	-
5.1(aluminium)	-	500	-
5.1(copper)	-	500	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
5.1(phosphorus)	-	500	-
5.1(nitrogen)	-	500	-
5.1(micro alloy)	-	2000	-
5.1(micro alloy)	-	2000	-
5.1(silicon )	-	500	-
5.1(aluminium)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(phosphorus)	-	500	-
5.1(sulphur)	-	500	-
5.1(carbon)	-	500	-
Cl 10(Galvanising Test)	-	2000	-
Cl 10(Galvanising Test)	-	2000	-
Cl 10(Galvanising Test)	-	2000	-
7.4(Mass of Coating: Triple Spot Test)	-	2000	-
7.4(Mass of Coating: Triple Spot Test)	-	2000	-
7.4(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	2000	-

26 Oct, 2025

-
Lab is recognized revised version of standard IS 277:2018

12559

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	100	15 % Discount to BIS
7.0(Marking and Instructions)	-	500	15 % Discount to BIS
8.0(Protection against access to live parts)	-	500	15 % Discount to BIS
10.0(Input and Current)	-	1000	15 % Discount to BIS
11.0(Heating)	-	1000	15 % Discount to BIS
13.0(Leakage Current and electric strength at operating temperature)	-	1500	15 % Discount to BIS
14.0(Transient Overvoltage)	-	500	15 % Discount to BIS
15.0(Moisture resistance)	-	1500	15 % Discount to BIS
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	500	15 % Discount to BIS
17.0(Overload Protection of transformer and associated circuit)	-	500	15 % Discount to BIS
19.0(Abnormal Operation)	-	500	15 % Discount to BIS
20.0(Stability and mechanical hazards)	-	500	15 % Discount to BIS
21.0(Mechanical Strength)	-	500	15 % Discount to BIS
22.0(Construction)	-	500	15 % Discount to BIS
23.0(Internal Wiring)	-	500	15 % Discount to BIS
25.0(Supply Connection and External Flexible Cords)	-	500	15 % Discount to BIS
26.0(Terminals for external conductors)	-	500	15 % Discount to BIS
27.0(Provision For Earthing)	-	500	15 % Discount to BIS
28.0(Screws and Connections)	-	500	15 % Discount to BIS
29.0(Creepage Distances and Clearances)	-	500	15 % Discount to BIS
30.0(Resistance To Heat and Fire)	-	1000	15 % Discount to BIS
31.0(Resistance To Rusting)	-	500	15 % Discount to BIS

31 Dec, 2026

-
REVISED STANDARD INCLUDED FOR IS 302-2-21:2018 W.E.F. 10-09-2020.

12560

ELECTRONICS AND QUALITY DEVELOPMENT CENTRE - EQDC, GANDHINAGAR

7118234

IS 8034 (2018)

Submersible pumpsets - Specification (Third Revision)

Submersible Pump-sets Up to 45 kW

12500 View breakup
Up to 3.7kW : Rs. 4,125/-; Above 3.7kW up to 7.5kW : Rs. 4,500/-; Above7.5kW up to 11kW : Rs. 4,875/- ; Above 11kW up to 15kW : Rs. 6,000/-; Above 15kW up to 20kW : Rs. 6,375/-; Above 20kW up to 25kW : Rs. 8,250/-; Above 25kW up to 30kW : Rs. 9,000/-; Above 30kW up to 35kW : Rs. 9375/- ; Above 35kW up to 40kW : Rs.9,750/-; Above 40kW up to 45k : Rs. 10,500/-.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
14(Marking)	-	50	-
6.1 (a)(Constructional Features)	-	100	-
6.1 (b)(Constructional Features)	-	100	-
6.1 (c)(Constructional Features)	-	100	-
6.1 (d)(Constructional Features)	-	100	-
6.1 (e)(Constructional Features)	-	100	-
6.1 (f)(Constructional Features)	-	100	-
6.2 (a)(Material of construction Part Sub Assembly Shaft Sleeve)	-	100	-
6.2 (b)(Material of construction Part Sub Assembly Casing wear ring (if provided))	-	100	-
6.2 (c)(Material of construction Part Sub Assembly Bush)	-	100	-
6.2 (d)(Material of construction Part Sub Assembly Discharge casing (if provided))	-	100	-
6.2 (e)(Material of construction Part Sub Assembly Impeller)	-	100	-
6.2 (f)(Material of construction Part Sub Assembly Pump Bowl/Diffuser)	-	100	-
6.2 (g)(Material of construction Part Sub Assembly Pump Shaft)	-	100	-
6.2 (h)(Material of construction Part Sub Assembly Suction Casing)	-	100	-
6.2.2.1(Gaskets, Seals and Packings)	-	100	-
6.2.2.2(Gaskets, Seals and Packings)	-	100	-
6.2.3(Gaskets, Seals and Packings)	-	100	-
6.2.4(Gaskets, Seals and Packings)	-	100	-
6.2.5(Gaskets, Seals and Packings)	-	100	-
7.1.1(Design features: Typical design features 0f components of pump)	-	100	-
7.1.2(Design features: Typical design features 0f components of pump)	-	100	-
7.1.3(Design features: Typical design features 0f components of pump)	-	100	-
7.1.4(Design features: Typical design features 0f components of pump)	-	100	-
7.1.5(Design features: Typical design features 0f components of pump)	-	100	-
7.1.6(Design features: Typical design features 0f components of pump)	-	100	-
8.1(General Requirements)	-	100	-
8.2(Casing)	-	500	-
8.3(Impeller)	-	100	-
8.4.1(Shaft)	-	100	-
8.4.2(Shaft)	-	100	-
8.5.1(Balancing)	-	600	-
8.5.2(Balancing)	-	600	-
8.7.1(Direction of Rotation)	-	100	-
8.7.2(Direction of Rotation)	-	100	-
8.8(Terminal Marking)	-	0	-
8.9.1(Typical Installation)	-	100	-
8.9.3(Typical Installation)	-	100	-
10.2(Laboratory Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	1200	-
10.2(Laboratory Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	1500	-
10.2(Laboratory Tests Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	1500	-
10.3(Hydrostatic Pressure Test)	-	500	-
11.1.1(Guarantee of Performance)	-	500	-
11.1.2(Guarantee of Performance)	-	500	-
11.1.2(Guarantee of Performance)	-	500	-
11.1.3(Guarantee of Performance)	-	500	-
11.1.4(Guarantee of Performance)	-	500	-
11.1.5(Guarantee of Performance)	-	500	-
12(Guarantee of workmanship and material)	-	100	-
8.9(Typical installation)	-	100	-
8.5(Balancing of rotor)	-	600	-
8.6(Submersible cable)	-	200	-
8.7(Direction of Rotation)	-	100	-
7(Design features)	-	100	-
7.1.10(Voltage & Frequency variation)	-	100	-
6(Constructional Features)	-	100	-
6(Measurement of shaft extension)	-	100	-
11(Guarantee of Performance)	-	100	-
10(Pump Performance test)	-	1500	-
9.1(General)	-	100	-
9.10 (a)(Insulation Resistance test)	-	200	-
9.10 (b)(High Voltage test)	-	400	-
9.10 (c)(Measurement of Stator Resistance)	-	400	-
9.10 (d)(No Load Test at Rated Voltage)	-	500	-
9.10 (e)(Reduced voltage Running up test)	-	500	-
9.10 (f) & (g)(Locked Rotor Test)	-	700	-
9.10 (h)(Leakage current test)	-	300	-
9.10 (j)(Temperature Rise Test at Rated Voltage)	-	1200	-
9.10 (k)(Temperature rise test at reduced voltage)	-	1000	-
8.9.4c(Earthing)	-	100	-
7.1.7(Pump loading shall be as per 11.1.5)	-	100	-
7.1.9(prime mover electric motor suitable for the pumps shall be of contineous duty as specified in IS/IEC 60034-4 and as per IS 9283)	-	100	-
8.6.1(Flat/Round cables as per IS694 shall be used)	-	100	-
8.6.2(The size of the conductor shall be adequate and suitable for contineous use under water and in air. the length of the cable shall be minimum 2 m externallly unless otherwise specified by the customer)	-	100	-
8.6.3(The size and of the cable should be suitably selected so that the voltage drop between control panel and the mptor terminal does not exeed three percent of the rated voltage)	-	100	-
8.6.4(In case a joint is required to be made between the lead cable supplied with the motor and the user’s cable, a detailed procedure to make water tight joining shall be supplied by the motor manufacturer.)	-	100	-
8.9(Installation)	-	100	-
8.9.2(The pumpset shall be installed as per guidelines laid down in IS 14536 or as per the recommendation of the manufacturer)	-	100	-
8.9.4.1(Earthing of the motor shall be done as per IS 9283 in accordance with the relevant provisions of IS 3043.)	-	100	-
8.9.4.2(In case of PVC pipes used as discharge pipe, a separate non corrosive, low resistance conductor from motor earth terminal to control panel earth terminal shall be provided for earthing.)	-	100	-
8.9.4.3(In case non corrosive GI pipes and clamps are used for the purpose of earthing the motor, earthing connection may be made to the discharge pipe clamp and to the control panel earth terminal)	-	100	-

09 Oct, 2027

-
Upto 45kW. REVISED VERSION OF IS 8034:2018 Included w.e.f. 05 Apr 2019.

12561

DELHI TEST HOUSE, Azadhpur

8131406

IS 11069 (2018)

Refined, bleached, hydrogenated, winterized and deodorized (RBHWD) soybean oil - Specification (First Revision)

- View breakup
Rs.21250.00 Provisional testing charges

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

17 Jun, 2027

-
Included w.e.f.28-09-2018.

12562

ELECTRONICS AND QUALITY DEVELOPMENT CENTRE - EQDC, GANDHINAGAR

7118234

IS 14220 (2018)

Openwell submersible pumpsets - Specification (First Revision)

Open-well Submersible Pump-sets - Up to 45 kW

12500 View breakup
Up to 3.7kW : Rs. 3,750/-; Above 3.7kW up to 7.5kW : Rs. 4,500/-; Above7.5kW up to 11kW : Rs. 4,875/- ; Above 11kW up to 15kW : Rs. 5,250/-; Above 15kW up to 20kW : Rs. 5,625/-; Above 20kW up to 25kW : Rs. 6,000/-; Above 25kW up to 30kW : Rs. 6,375/-; Above 30kW up to 35kW : Rs. 6,750/- ; Above 35kW up to 40kW : Rs.7,125/-; Above 40kW up to 45k : Rs. 7,500/-.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Design Features)	-	100	-
8.1.1(Design Features)	-	100	-
8.1.4(Design Features)	-	100	-
8.1.5(Design Features)	-	100	-
8.1.5(Design Features)	-	100	-
8.1.7(Design Features)	-	100	-
9(Efficiency)	-	300	-
10(Performance (Cl 17.1 of IS 5120))	-	1500	-
10(Suction and Delivery Ends (Cl 17.2 of IS 5120))	-	100	-
10(Suction and Delivery Ends (Cl 17.2.1 of IS 5120))	-	100	-
10(Fluid Passages (Cl 17.3 of IS 5120))	-	100	-
10(Draining Plugrs (Cl 17.4 of IS 5120))	-	100	-
10(Lantern Ring (Cl 17.5 of IS 5120))	-	100	-
10(Casing (Cl 17.6 of IS 5120))	-	100	-
10(Impeller (Cl 17.7 of IS 5120))	-	400	-
10(Shaft (Cl 17.8 of IS 5120))	-	100	-
10(Shaft Couplings (Cl 17.9 of IS 5120))	-	100	-
10(Bearings (Cl 17.10 of IS 5120))	-	100	-
10(Bearings (Cl 17.10.1 of IS 5120))	-	100	-
10(Bearings (Cl 17.10.2 of IS 5120))	-	100	-
10( Stuffing Boxes (Cl 17.11 of IS 5120))	-	100	-
10(Base Plates (Cl 17.12 of IS 5120))	-	100	-
10(Prime Mover (Cl 17.13 of IS 5120))	-	100	-
10(Name Plate (Cl 17.14 of IS 5120))	-	100	-
10(Name Plate (Cl 17.14 of IS 5120))	-	100	-
10(Name Plate (Cl 17.14 of IS 5120))	-	100	-
10(Name Plate (Cl 17.14.1 of IS 5120))	-	100	-
10.2(Casing)	-	300	-
10.3(Impeller)	-	100	-
10.4.1(Shaft)	-	100	-
10.4.2(Shaft)	-	100	-
10.5.1(Balancing)	-	600	-
10.5.2(Balancing)	-	600	-
10.5.3(Balancing)	-	600	-
10.5.4(Balancing)	-	600	-
10.6.1( Provision for Earthing)	-	100	-
10.6.2( Provision for Earthing)	-	100	-
10.6.3( Provision for Earthing)	-	100	-
10.6.4( Provision for Earthing)	-	100	-
10.7.1(Terminal Marking and Direction of Rotation)	-	100	-
10.7.2(Terminal Marking and Direction of Rotation)	-	100	-
10.7.3(Terminal Marking and Direction of Rotation)	-	100	-
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	1200	-
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	1200	-
15.5(Hydrostatic Pressure Test)	-	500	-
16.1.1( Guarantee of Performance)	-	500	-
16.1.2( Guarantee of Performance)	-	500	-
16.1.3( Guarantee of Performance)	-	500	-
16.1.4( Guarantee of Performance)	-	500	-
16.1.5( Guarantee of Performance)	-	500	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1(Marking)	-	50	-
18.1.3(Marking)	-	50	-
7(Constructional features)	-	100	-
7.1(It is recognized that a number of materials of construction are available to meet the needs for pumps handling clear, cold water.)	-	100	-
7.2(Gaskets, seals and packings used for clear, cold water pumps shall conform to the applicable requirements specified in 5.2 of IS 5120.)	-	100	-
7.3(The motor shall be provided with a breathing attachment like bellows, diaphragm etc; to compensate the volumetric variation of water inside the motor due to change in the temperature.)	-	100	-
7.4(The motor shall be protected from ingress of well water, sand and other foreign matter by means of cable glands, rubber seals etc.)	-	100	-
7.5(All materials and components for the motor shall be suitable for application in respect of resistance and mechanical performance to protect it)	-	100	-
7.6(The rotor of the wet type open well submersible motor and rotor in water filled designed motor shall be provided with suitable coating from corrosion under water. However if suitable anticorrosion additive is added in the water, no separate protection on rotors is necessary.)	-	100	-
8(Design Features)	-	100	-
8.1.2(The multi-stage pump shaft may be guided through bearings, the bearings may be provided in stage casing, suction housing and discharge casing, while in case of intermediate bearings, suitable positions may be selected in the overall span.)	-	100	-
8.1.3(The pump may be equipped with replaceable bearing and wearing ring, wherever provided.)	-	100	-
8.1.4(The strainer on the suction shall offer the best compromise amongst restraining large solids from entering the pump and containing the suction losses to the minimum.)	-	100	-
8.1.5(The pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +5 percent and minimum –15 percent of the guaranteed duty point head up to 30 m. Above 30 m, the pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +10 percent and minimum –25 percent of the guaranteed duty point head.)	-	100	-
12(Cable)	-	100	-
12.1.2(The size of the conductor shall be adequate and suitable for contineous use under water and in air. the length of the cable shall be minimum 2 m externallly unless otherwise specified by the customer)	-	100	-
12.1.3(The size and of the cable should be suitably selected so that the voltage drop between control panel and the mptor terminal does not exeed three percent of the rated voltage)	-	100	-
12.1.4(In case a joint is required to be made between the lead cable supplied with the motor and the user’s cable, a detailed procedure to make water tight joining shall be supplied by the motor manufacturer.)	-	100	-
12.1.5(If four core cable is used, the fourth core is to be used for earthing.)	-	100	-
14.10.1(Type test)	-	500	-
14.10.1(a)(Insulation Resistance test)	-	200	-
14.10.1(b)(High Voltage test)	-	400	-
14.10.1(c)(Measurement of stator resistance)	-	400	-
14.10.1(d)(No load test at rated voltage)	-	500	-
14.10.1(e)(Reduced voltage running up test at no load)	-	500	-
14.10.1(f)(Locked rotor)	-	700	-
14.10.1(g)(Breakaway (starting) torque)	-	700	-
14.10.1(h)(Leakage current test;)	-	300	-
14.10.1(j)(Temperature rise test at rated voltage)	-	1200	-
14.10.1(k)(Temperature rise test at reduced voltage)	-	1000	-
16.1(Guarntee of Performance)	-	100	-
16.1.1(The pumpset shall be guaranteed for their performance of the nominal volume rate of flow and the nominal head at the guaranteed duty point. The overall efficiency of the pumpset shall be guaranteed at the declared duty point only.)	-	100	-
16.1.2(The guarantee shall be deemed to have been met with, if the measured values of head, volume rate of flow and overall efficiency are within the indicated in IS 11346 limits)	-	100	-
16.1.3(Open well submersible motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.)	-	100	-
16.1.4(The pump shall be tested for the operating head range as per 8.1.5.)	-	100	-
16.1.5(The overloading of motor is that condition when maximum current drawn by the motor exceeds the limit of 1.07 times of the rated motor current)	-	100	-
16.1.6(The tolerance shall apply to guaranteed duty point only.)	-	100	-
16.1.7(Performance at rated voltage and supply frequency is actual performance of the set. This is better than performance at rated speed, since in the entire operating head range speed of motor is higher than rated speed, as motor is running in under loaded condition.)	-	100	-
16.1.8(The manufacturer shall specify the minimum submergence of pump unit at duty point.)	-	100	-

09 Oct, 2027

-
Upto 45kW. REVISED VERSION OF IS 14220:2018 Included w.e.f. 05 Apr 2019.

12563

Nextron International Lab Private Limited

9140226

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

40000 View breakup
Rs.40,000/- (For each sample) [10% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	1000	-
5(General Safety Considerations)	-	500	-
5.1(General)	-	500	-
5.2(Insulation and Wiring)	-	500	-
5.3(Venting)	-	500	-
5.4(Temperature, Voltage and Current Management)	-	500	-
5.5(Terminal Contacts)	-	500	-
5.6(Assembly of Cells into batteries)	-	500	-
5.7(Quality Plan)	-	500	-
6(Tyoe Test amd Sample Size)	-	5000	-
7(Specific requirements and tests)	-	3000	-
7.1(Charging procedure for test purposes)	-	3000	-
7.2(Intended Use)	-	3000	-
7.3(Reasonably foreseeable misuse)	-	3000	-
8(Information for safety)	-	1500	-
8.1(General)	-	1500	-
8.2(Small Cell and battery safety information)	-	1500	-
9.1(Cell Marking)	-	1250	-
9.2(Battery Marking)	-	1250	-
9.3(Caution for ingestion of small cells and batteries)	-	1250	-
9.4(Other information)	-	1250	-
10(Packaging)	-	8500	-

06 Jun, 2027

-
REVISED VERSION INCLUDED w.e.f. 15-11-2019.

12564

Nextron International Lab Private Limited

9140226

IS 16046 : Part 2 (2018)

40000 View breakup
Rs.40,000/- (For each sample) [10% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	1000	-
5(General Safety Considerations)	-	450	-
5.1(General)	-	450	-
5.2(Insulation and Wiring)	-	450	-
5.3(Venting)	-	450	-
5.4(Temperature, Voltage and Current Management)	-	450	-
5.5(Terminal Contacts)	-	450	-
5.6(Assembly of Cells into batteries)	-	450	-
5.7(Quality Plan)	-	450	-
5.8(Battery Safety Components)	-	450	-
6(Type Test and Sample Size)	-	4000	-
7(Specific requirements and tests)	-	1000	-
7.1(Charging procedure for test purposes)	-	4000	-
7.2(Intended Use)	-	4000	-
7.3(Reasonably foreseeable misuse)	-	4000	-
8(Information for safety)	-	1000	-
8.1(General)	-	1500	-
8.2(Small Cell and battery safety information)	-	1500	-
9(Marking)	-	1000	-
9.1(Cell Marking)	-	1000	-
9.2(Battery Marking)	-	1000	-
9.3(Caution for ingestion of small cells and batteries)	-	1000	-
9.4(Other information)	-	1000	-
10(Packaging)	-	8950	-

06 Jun, 2027

-
REVISED VERSION INCLUDED w.e.f. 15-11-2019

12565

REGIONAL REFERENCE STANDARD LABORATORY, KHORDHA

5165624

IS 16514 : Part 1 (2018)

Non-Automatic Weighing Instruments Part 1 Terminology and Definitions

- View breakup
The testing charges for mechanical weighning machines-Rs.10000/- + 18% GST

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

12566

ELECTRONICS AND QUALITY DEVELOPMENT CENTRE - EQDC, GANDHINAGAR

7118234

IS 17018 : Part 1 (2018)

Solar photovoltaic water pumping systems: Part 1 centrifugal pumps - Specification

33750 View breakup
Rs.16500/- for 1hp, Rs.18750, for 2hp, Rs.20250/- for 3hp, Rs.22500/- for 4hp, Rs.26250/- for 5hp, Rs.33750/- for above 5hp to 7hp, Rs. 37500 for above 7hp to 10hp.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1(Electrical performance Test- Speed)	-	5000		-
10.3(Whole day Performance (real condition testing))	-	31500		-

09 Oct, 2027

-
Included w.e.f. 09-09-2020. Up to 5 HP

12567

National Test House (NR) - NTH, Ghaziabad

8101304

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

15000 View breakup
Rs.5000/- for 1 fan, 15000/- for 3 fans

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	40	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	40	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	0	-
8.1,a(Marking )	-	10	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	100	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	40	-
8.1,b(Marking )	-	10	-
8.1,c(Marking )	-	10	-
8.1,d(Marking )	-	10	-
8.1,e(Marking )	-	10	-
8.1,f(Marking )	-	10	-
8.1,g(Marking )	-	10	-
8.2(Marking )	-	10	-
8.3,a(Marking )	-	10	-
8.3,b(Marking )	-	10	-
8.3,c(Marking )	-	10	-
8.3,d(Marking )	-	10	-
8.3,e(Marking )	-	10	-
8.4(Marking )	-	10	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	10	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	10	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	10	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	10	-
6.2(Rating)	-	200	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	400	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	200	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	200	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	500	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	0	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	400	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	100	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	0	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	500	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	0	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	800	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	200	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	100	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	100	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	100	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	100	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	100	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	100	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	100	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	100	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	100	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	100	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	100	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	100	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	100	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	100	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	100	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	100	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	500	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	200	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	400	-
10.1(Speed Regulators)	-	100	-
10.2(Speed Regulators)	-	50	-
10.2(Speed Regulators)	-	50	-
10.2(Speed Regulators)	-	200	-
10.3(Speed Regulators)	-	0	-
10.4(Speed Regulators)	-	50	-
10.5(Speed Regulators)	-	50	-
10.6(Speed Regulators)	-	50	-
10.7(Speed Regulators)	-	0	-
10.8(Speed Regulators)	-	50	-
11.1(Starting)	-	50	-
11.2(Starting)	-	50	-
12(Interchangeability)	-	100	-
13(Silent Operation)	-	0	-
14.3 & Table 1(Test for Air Performance)	-	5000	-
14.3 & Table 1(Test for Air Performance)	-	100	-
14.4(Measurement of Speed of the Fan )	-	200	-
14.4(Measurement of Speed of the Fan )	-	100	-
14.5(Measurement of Power factor and Power Input)	-	0	-
16(Endurance Test)	-	500	-
16(Endurance Test)	-	200	-
16(Endurance Test)	-	200	-
16(Endurance Test)	-	200	-
16(Endurance Test)	-	100	-
16(Endurance Test)	-	0	-
17(Test for Harmonic Distortion)	-	200	-

26 Oct, 2025

-
Lab is recognized revised version of standard IS 374:2019.

12568

DELHI TEST HOUSE, Azadhpur

8131406

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	200	-
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	200	-
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	200	-
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	200	-
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	200	-
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	200	-
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	200	-
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	200	-
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	200	-
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	200	-
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	200	-
4.3.2 - 5.21( Expanding materials)	-	200	-
4.4.1 - 5.2(Small parts-For children under 36 months)	-	200	-
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	200	-
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	200	-
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	200	-
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	200	-
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	100	-
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	100	-
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	100	-
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	100	-
4.5.6(Shape, size and strength of certain toys-Balloons)	-	100	-
4.5.7(Shape, size and strength of certain toys-Marbles)	-	200	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	200	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-	200	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening not in Base)	-	200	-
4.5.8 - b(Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-	200	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	200	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	200	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys)	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-The maximum distance between centrelines of adjacent peaks )	-	200	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-Minimum depth)	-	200	-
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	100	-
4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-	100	-
4.6.2(Edges-Functional sharp edges)	-	100	-
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	100	-
4.6.4( Edges-Edges on moulded toys)	-	100	-
4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	100	-
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	100	-
4.7.2 - a(Points-Functional sharp points)	-	100	-
4.7.2 - b(Points-Functional sharp points)	-	100	-
4.7.3 (Wooden toys)	-	100	-
4.8.1(Projections-General requirments)	-	100	-
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	200	-
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	200	-
4.9 - c( Metal wires and rods)	-	200	-
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	200	-
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	200	-
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	200	-
4.9 - c( Metal wires and rods-Spokes ends)	-	200	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	200	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	200	-
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	200	-
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	200	-
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	200	-
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	200	-
4.11.3.1(a) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	200	-
4.11.3.1(b) - 5.11.3( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-	200	-
4.11.3.1(b) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	200	-
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	200	-
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	200	-
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	200	-
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	200	-
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	200	-
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	200	-
4.11.6(Cords- Electrical cables)	-	200	-
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	200	-
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	200	-
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	200	-
4.11.10(Cords-Cords on toy bags)	-	200	-
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	200	-
4.11.11( Cords, strings and lines for flying toys- )	-	200	-
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	200	-
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	200	-
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	200	-
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	200	-
4.12.3(Folding mechanisms-Hinge line clearance)	-	200	-
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	200	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	200	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	200	-
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	200	-
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	200	-
4.14(a)(Springs)	-	100	-
4.14(b)(Springs)	-	100	-
4.14(c)(Springs)	-	100	-
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	100	-
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	100	-
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	100	-
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	100	-
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	100	-
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	100	-
4.16.1(Enclosures-Ventilation)	-	100	-
4.16.1(Enclosures-Ventilation-No of openings)	-	100	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	100	-
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	100	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	100	-
4.16.1(Enclosures-Ventilation-spacing(If One opening))	-	100	-
4.16.1(Enclosures-Ventilation)	-	100	-
4.16.2.1(Enclosures-Closures-Lids, doors and similar devices)	-	100	-
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	100	-
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	100	-
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	100	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	100	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-	100	-
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	100	-
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	100	-
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	100	-
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	100	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	100	-
4.16.3(Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-	100	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	100	-
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	200	-
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	200	-
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	100	-
4.18.2(b)(Projectile toys-Projectiles)	-	100	-
4.18.2(c)(Projectile toys-Projectiles)	-	100	-
4.18.2(c)(Projectile toys-Projectiles-Radius)	-	100	-
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	100	-
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	100	-
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	100	-
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	100	-
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	100	-
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	100	-
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	100	-
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	100	-
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	100	-
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	100	-
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	100	-
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	100	-
4.18.3(c )(Projectile toys-Projectile toys with stored energy)	-	100	-
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	100	-
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	100	-
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	100	-
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	100	-
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	100	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	100	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	100	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	100	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-	100	-
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	100	-
4.18.4.3 - 5.15.2(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-wall impact test for projectiles)	-	100	-
4.18.4.3(a)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	100	-
4.18.4.3(b)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	100	-
4.18.4.3(c)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	100	-
4.18.4.6 - 5.24.5(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test)	-	100	-
4.18.4.6 - 5.24.5 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set- kinetic energy per area After torque test)	-	100	-
4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	100	-
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	100	-
4.19(Rotors and propellers)	-	100	-
4.2(Aquatic toys)	-	100	-
4.21(a)(Braking)	-	100	-
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	100	-
4.21(b)(braking)	-	100	-
4.22.1(Toy bicycles-Instructions for use)	-	100	-
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	100	-
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	100	-
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	100	-
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	100	-
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	100	-
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	200	-
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	100	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	100	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	100	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	100	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	100	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	100	-
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	100	-
4.25(Liquid-filled toys)	-	100	-
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	100	-
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	100	-
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	100	-
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	100	-
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	100	-
4.28( Percussion caps specifically designed for use in toys)	-	100	-
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	100	-
4.30.2(Toy scooters-Warnings and instructions for use)	-	100	-
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	100	-
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	100	-
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	100	-
4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	100	-
4.30.3 - 5.27 - 5.9(Toy scooters-Strength-dynamic strength for toy scooters-sharp-point test)	-	100	-
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	100	-
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	100	-
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	100	-
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	100	-
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	100	-
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	100	-
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	100	-
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	100	-
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	100	-
4.30.6 ( Toy scooters-Braking)	-	100	-
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	100	-
4.30.7( Toy scooters-Wheel size(diameter))	-	100	-
4.30.8(Toy scooters-Projections)	-	100	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	100	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	100	-
4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	200	-
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	200	-
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	200	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-	200	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-	200	-
4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	200	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	200	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	200	-
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	100	-
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	100	-
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	100	-
4.34(Sledges and toboggans with cords for pulling)	-	100	-
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	100	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-Test for soft-filled toys )	-	250	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-rate of spread of flame )	-	250	-
9873 (Part - 2) 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	-
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	-
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	500	-
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame)	-	500	-
9873 (Part - 2) 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	500	-
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	500	-
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	500	-
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	2000	-
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	2000	-
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	2000	-
9873 (Part - 3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	625	-
9873 (Part - 3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	625	-
9873 (Part - 3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	625	-
9873 (Part - 1) 4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	200	-
9873 (Part - 1) 4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	200	-
9873 (Part - 1) 4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	200	-
9873 (Part - 1) 4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	200	-
9873 (Part - 1) 4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	200	-
9873 (Part - 1) 4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	200	-
5.24.6.1(Tension Test General procedure)	-	200	-
4.3.1(Material quality)	-	100	-

17 Jun, 2027

-
Included w.e.f. 15-10-2020

12569

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 14286 : Part 1 : Sec 1 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 1 special requirements for testing of crystalline silicon photovoltaic (Pv) modules (Second Revision)

Terrestrial Photovoltaic (PV) Modules

750000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(Visual inspection (MQT 01))	-	7500	-
11.2(Maximum power determination (MQT 02))	-	7500	-
11.3(Insulation test (MQT 03))	-	15000	-
11.4(Measurement of temperature coefficients (MQT 04))	-	55000	-
11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	55000	-
11.6(Performance at STC and NMOT (MQT 06))	-	60000	-
11.7(Performance at low irradiance (MQT 07))	-	57500	-
11.8(Outdoor exposure test (MQT 08))	-	32500	-
11.9(Hot-spot endurance test (MQT 09))	-	80000	-
11.1(UV preconditioning test (MQT 10))	-	37500	-
11.11(Thermal cycling test (MQT 11))	-	50000	-
11.12(Humidity-freeze test (MQT 12))	-	57500	-
11.13(Damp heat test (MQT 13))	-	42500	-
11.14(Robustness of terminations (MQT 14))	-	20000	-
11.15(Wet leakage current test (MQT 15))	-	25000	-
11.16(Static mechanical load test (MQT 16))	-	25000	-
11.17(Hail test (MQT 17))	-	52500	-
11.18(Bypass diode thermal test (MQT 18))	-	27500	-
11.19(Stabilization (MQT 19))	-	42500	-

19 Mar, 2026

-
Included w.e.f 13.05.2020

12570

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 14286 : Part 1 : Sec 3 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 3 special requirements for testing of thin - Film amorphous silicon based photovoltaic (Pv) modules (Second Revision)

750000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 IS 14286( Marking and Documentation)	-	0	-
11.1 IS 14286( Visual inspection)	-	7500	-
11.2 IS 14286( Maximum power determination)	-	7500	-
11.3 IS 14286( Insulation Test)	-	15000	-
11.4 IS 14286( Measurement of temperature coefficients)	-	55000	-
11.5 IS 14286( Measurement of nominal module operating temperature (NMOT))	-	55000	-
11.6 IS 14286( Performance at STC and NMOT)	-	60000	-
11.7 IS 14286( Performance at low irradiance)	-	57500	-
11.8 IS 14286( Outdoor exposure Test)	-	32500	-
11.9 IS 14286( Hot-spot endurance test)	-	80000	-
11.10 IS 14286( UV Preconditioning test )	-	37500	-
11.11 IS 14286( Thermal cycling test)	-	50000	-
11.12 IS 14286( Humidity-freeze test)	-	57500	-
11.13 IS 14286(Damp heat test)	-	42500	-
11.14, Table 1 IS 14286( Robutness of terminations test - Retention of Junction Box on Mounting Surface - Test of Cord Anchorage)	-	20000	-
11.15 IS 14286( Wet leakage current test)	-	25000	-
11.16(Static mechanical load test (MQT 16))	-	25000	-
11.17, Table 3 & 4, IS 14286( Hail test)	-	52500	-
11.18 IS 14286( Bypass diode testing)	-	27500	-
11.19 IS 14286( Stabilization )	-	42500	-
5 IS 14286( Marking and Documentation)	-	0	5% discount for BIS
11.1 IS 14286( Visual inspection)	-	7500	5% discount for BIS
11.2 IS 14286( Maximum power determination)	-	7500	5% discount for BIS
11.3 IS 14286( Insulation Test)	-	15000	5% discount for BIS
11.4 IS 14286( Measurement of temperature coefficients)	-	55000	5% discount for BIS
11.5 IS 14286( Measurement of nominal module operating temperature (NMOT))	-	55000	5% discount for BIS
11.6 IS 14286( Performance at STC and NMOT)	-	60000	5% discount for BIS
11.7 IS 14286( Performance at low irradiance)	-	57500	5% discount for BIS
11.8 IS 14286( Outdoor exposure Test)	-	32500	5% discount for BIS
11.9 IS 14286( Hot-spot endurance test)	-	80000	5% discount for BIS
11.10 IS 14286( UV Preconditioning test )	-	37500	5% discount for BIS
11.11 IS 14286( Thermal cycling test)	-	50000	5% discount for BIS
11.12 IS 14286( Humidity-freeze test)	-	57500	5% discount for BIS
11.13 IS 14286(Damp heat test)	-	42500	5% discount for BIS
11.14, Table 1 IS 14286( Robutness of terminations test - Retention of Junction Box on Mounting Surface - Test of Cord Anchorage)	-	20000	5% discount for BIS
11.15 IS 14286( Wet leakage current test)	-	25000	5% discount for BIS
11.16(Static mechanical load test (MQT 16))	-	25000	5% discount for BIS
11.17, Table 3 & 4, IS 14286( Hail test)	-	52500	5% discount for BIS
11.18 IS 14286( Bypass diode testing)	-	27500	5% discount for BIS
11.19 IS 14286( Stabilization )	-	42500	5% discount for BIS

19 Mar, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found