BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

12601

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 555 (1979)

Specification for electric table type fans and regulators (Third Revision)

Specification for electric table type fans and regulato

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.16(Creepage Distances and Clearances)	-	500	10 % Discount to BIS
10.14(Cord Grip Test)	-	700	10 % Discount to BIS
10.13, 7.4(Mechanical Endurance Test (for Regulators Only))	-	750	10 % Discount to BIS
10.12(Moisture Resistance Test)	-	1000	10 % Discount to BIS
10.11(Protection against Electric Shock)	-	500	10 % Discount to BIS
10.1(Earthing Connection)	-	500	10 % Discount to BIS
10.9(Fan Speed and Input)	-	500	10 % Discount to BIS
10.8(Construction)	-	300	10 % Discount to BIS
10.7(Insulation-Resistance Test (Shall follow Moisture Resistance Test Cl.10.12))	-	750	10 % Discount to BIS
10.6(High Voltage Test)	-	1000	10 % Discount to BIS
10.5(Leakage Current)	-	750	10 % Discount to BIS
10.4(Temperature-Rise Test)	-	2000	10 % Discount to BIS
10.3(Air Delivery Test)	-	3000	10 % Discount to BIS
9.0(Marking)	-	300	10 % Discount to BIS
7.11(Oscillating Mechanism)	-	500	10 % Discount to BIS
7.9(Interchangeability)	-	200	10 % Discount to BIS
7.8(Speed Regulators)	-	600	10 % Discount to BIS
6.0(Design and General Construction)	-	750	10 % Discount to BIS
5.0(Rated Frequency)	-	100	10 % Discount to BIS
4.0(Rated Voltages)	-	100	10 % Discount to BIS
3.0(Size, Speed and Types)	-	200	10 % Discount to BIS

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

12602

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 191 (2007)

Copper - Specification (Fourth Revision)

For all Grades

6200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	0	-
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	0	-
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	0	-
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	0	-
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	0	-
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	0	-
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	0	-
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	0	-
4-Table 1(GRADES/DESIGNATIONS)	-	0	-
5.1- Table 2(L)	-	0	-
5.1- Table 2(L1)	-	0	-
5.1- Table 2(h)	-	0	-
5.1- Table 2(h1)	-	0	-
5.1- Table 2(b)	-	0	-
5.1- Table 2(b1)	-	0	-
5.1- Table 2(R)	-	0	-
5.1- Table 2(R1)	-	0	-
5.1- Table 2(R2 )	-	0	-
5.1- Table 2(α )	-	0	-
5.1- Table 2( β )	-	0	-
5.1- Table 2(γ)	-	0	-
5.2(Billets)	-	0	-
5.4-Table 3 (For Billets)(Mass)	-	0	-
5.2-Table 3 (For Billets)(Diameter)	-	0	-
5.2-Table 3 (For Billets)(Length)	-	0	-
5.2-Table 3 (For Billets)(Deviation from straightness per 1000 mm length)	-	0	-
5.4-Table 3 (Vertically continuously cast wire bars)(Mass)	-	0	-
5.3-Table 3 (Vertically continuously cast wire bars)(Width)	-	0	-
5.3-Table 3 (Vertically continuously cast wire bars)(thickness )	-	0	-
5.3-Table 3 (Vertically continuously cast wire bars)(Other dimention)	-	0	-
5.4-Table 3 (Vertically static cast wire bars)(Mass)	-	0	-
5.3-Table 3 (Vertically static cast wire bars)(Width)	-	0	-
5.3-Table 3 (Vertically static cast wire bars)(thickness )	-	0	-
5.3-Table 3 (Vertically static cast wire bars)(Other dimention)	-	0	-
5.4-Table 3 (Ingots)(Mass)	-	0	-
5.4-Table 3 (Cast cakes)(Mass)	-	0	-
5.3-Table 3 (Cast cakes)(Width)	-	0	-
5.3-Table 3 (Cast cakes)(thickness )	-	0	-
5.3-Table 3 (Cast cakes)(Deviation from straightness per 1000 mm length)	-	0	-
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	100	-
7.1 - Table 4(Silver- IS 440)	-	100	-
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	3000	-
7.1 - Table 4(Phosphorus- IS 440)	-	200	-
7.1 - Table 4(Arsenic- IS440)	-	200	-
7.1 - Table 4(Antimony-IS440)	-	200	-
7.1 - Table 4(Bismuth-IS 440)	-	200	-
7.1 - Table 4(Iron IS 440)	-	200	-
7.1 - Table 4(Lead IS 440)	-	200	-
7.1 - Table 4(Nickel IS 440)	-	200	-
7.1 - Table 4(Oxygen IS 440)	-	200	-
7.1 - Table 4(Selenium - IS 440)	-	200	-
7.1 - Table 4(Sulphur- IS 440)	-	200	-
7.1 - Table 4(Tellurium- IS 440)	-	200	-
7.1 - Table 4(Tin - IS 440)	-	200	-
7.1 - Table 4(Znic-IS 440)	-	200	-
7.1 - Table 4(Selenium + Telluuium- IS 440)	-	200	-
7.1 - Table 4(Total Impurities- IS 440)	-	200	-
8.1(FREEDOM FROM DEFECTS)	-	0	-
8.2(FREEDOM FROM DEFECTS)	-	0	-
9.1- Table 5(Mass Resistivity- IS 3635)	-	0	-
10(HYDROGEN EMBRITTLEMENT TEST- IS 191)	-	0	-
9.1 , 9.2 & 10(Resistivity & HYDROGEN EMBRITTLEMENT TEST)	-	0	-

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

12603

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 14494 (2019)

Elastomer insulated flexible cables for use in mines - Specification (First Revision)

Elastomer insulated flexible cables for use in mines -

54000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
5.1(Power Cores)	-	0	-
5.2(Pilot and Earth Cores)	-	0	-
6(SEMI-CONDUCTING COMPOUND)	-	0	-
7.1(TAPE : Proofed Tape)	-	0	-
4(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
5.1(Power Cores)	-	0	-
5.2(Pilot and Earth Cores)	-	0	-
6(SEMI-CONDUCTING COMPOUND)	-	0	-
7.1(TAPE : Proofed Tape)	-	0	-
7.2(TAPE : Polyethylene Terephalate (PETP) or Polypropylene Base Tape)	-	0	-
7.3(TAPE )	-	0	-
8(CENTRE)	-	0	-
9.2(FILLERS)	-	0	-
10(CRADLE SEPARATOR)	-	0	-
11.1(ARMOUR)	-	0	-
11.2(ARMOUR)	-	0	-
11.2 a)(ARMOURING: Tensile Strength)	-	500	-
11.2 c)(ARMOURING: Torsion Test (For round wire ) )	-	500	-
11.2 b)(ARMOURING: Elongation )	-	500	-
11.2 d)(ARMOURING: Uniformity of zinc coating)	-	500	-
11.2 e)(ARMOURING: Mass of zinc coating )	-	500	-
12.1(SHEATH : Inner Sheath)	-	0	-
12.2(SHEATH : Outer Sheath)	-	0	-
4(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
5.1(Power Cores)	-	0	-
5.2(Pilot and Earth Cores)	-	0	-
6(SEMI-CONDUCTING COMPOUND)	-	0	-
7.1(TAPE : Proofed Tape)	-	0	-
7.2(TAPE : Polyethylene Terephalate (PETP) or Polypropylene Base Tape)	-	0	-
7.3(TAPE )	-	0	-
8(CENTRE)	-	0	-
9.2(FILLERS)	-	0	-
10(CRADLE SEPARATOR)	-	0	-
11.1(ARMOUR)	-	0	-
11.2(ARMOUR)	-	0	-
11.2 a)(ARMOURING: Tensile Strength)	-	0	-
11.2 c)(ARMOURING: Torsion Test (For round wire ) )	-	0	-
11.2 b)(ARMOURING: Elongation )	-	0	-
11.2 d)(ARMOURING: Uniformity of zinc coating)	-	0	-
11.2 e)(ARMOURING: Mass of zinc coating )	-	0	-
12.1(SHEATH : Inner Sheath)	-	0	-
12.2(SHEATH : Outer Sheath)	-	0	-
13.1(REINFORCEMENT MATERIAL : Tape)	-	0	-
13.2(REINFORCEMENT MATERIAL : Cord/Yarns)	-	0	-
14.1(CONSTRUCTION : CONDUCTOR)	-	0	-
14.2(CONSTRUCTION : CONDUCTOR)	-	0	-
14.3(CONSTRUCTION : CONDUCTOR)	-	0	-
14.4(CONSTRUCTION : CONDUCTOR)	-	0	-
15(CONDUCTOR SCREENING)	-	0	-
16.1(INSULATION)	-	0	-
16.2(INSULATION : Thickness of Insulation)	-	250	-
16.3(INSULATION : Tolerance on Insulation Thickness)	-	250	-
16.4(INSULATION : Application of Insulation)	-	0	-
16.5(INSULATION)	-	0	-
17.1(INSULATION SCREEN)	-	0	-
17.2(INSULATION SCREEN)	-	0	-
17.3(INSULATION SCREEN)	-	0	-
4(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
5.1(Power Cores)	-	0	-
5.2(Pilot and Earth Cores)	-	0	-
6(SEMI-CONDUCTING COMPOUND)	-	0	-
7.1(TAPE : Proofed Tape)	-	0	-
7.2(TAPE : Polyethylene Terephalate (PETP) or Polypropylene Base Tape)	-	0	-
7.3(TAPE )	-	0	-
8(CENTRE)	-	0	-
9.2(FILLERS)	-	0	-
10(CRADLE SEPARATOR)	-	0	-
11.1(ARMOUR)	-	0	-
11.2(ARMOUR)	-	0	-
11.2 a)(ARMOURING: Tensile Strength)	-	0	-
11.2 c)(ARMOURING: Torsion Test (For round wire ) )	-	0	-
11.2 b)(ARMOURING: Elongation )	-	0	-
11.2 d)(ARMOURING: Uniformity of zinc coating)	-	0	-
11.2 e)(ARMOURING: Mass of zinc coating )	-	0	-
12.1(SHEATH : Inner Sheath)	-	0	-
12.2(SHEATH : Outer Sheath)	-	0	-
13.1(REINFORCEMENT MATERIAL : Tape)	-	0	-
13.2(REINFORCEMENT MATERIAL : Cord/Yarns)	-	0	-
14.1(CONSTRUCTION : CONDUCTOR)	-	0	-
14.2(CONSTRUCTION : CONDUCTOR)	-	0	-
14.3(CONSTRUCTION : CONDUCTOR)	-	0	-
14.4(CONSTRUCTION : CONDUCTOR)	-	0	-
15(CONDUCTOR SCREENING)	-	0	-
16.1(INSULATION)	-	0	-
16.2(INSULATION : Thickness of Insulation)	-	500	-
16.3(INSULATION : Tolerance on Insulation Thickness)	-	500	-
16.4(INSULATION : Application of Insulation)	-	0	-
16.5(INSULATION)	-	0	-
17.1(INSULATION SCREEN)	-	0	-
17.2(INSULATION SCREEN)	-	0	-
17.3(INSULATION SCREEN)	-	0	-
17.4(INSULATION SCREEN)	-	0	-
18(PROTECTIVE SCREEN)	-	0	-
19(CONDUCTANCE OF SCREEN)	-	1000	-
19.1(Individual Core Screen)	-	0	-
19.2(Collective Screen)	-	0	-
20.1(CORE IDENTIFICATION)	-	0	-
20.2(Colour Scheme for Identification)	-	0	-
20.3(Scheme for Identification by Numbering)	-	0	-
21.1(LAYING UP OF CORES)	-	0	-
21.2(LAYING UP OF CORES)	-	0	-
21.3(LAYING UP OF CORES)	-	0	-
21.4(LAYING UP OF CORES)	-	0	-
22.1(INNER SHEATH)	-	0	-
22.2(Thickness of Inner Sheath)	-	500	-
22.3(INNER SHEATH)	-	0	-
23.1(ARMOURING)	-	0	-
23.2(ARMOURING)	-	0	-
23.3(ARMOURING)	-	0	-
23.4(ARMOURING)	-	0	-
24.1(OUTER SHEATH)	-	0	-
24.2(Thickness of Outer Sheath)	-	500	-
24.3(Tolerance on Thickness of Outer Sheath)	-	500	-
24.4(OUTER SHEATH)	-	0	-
4(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
5.1(Power Cores)	-	0	-
5.2(Pilot and Earth Cores)	-	0	-
6(SEMI-CONDUCTING COMPOUND)	-	0	-
7.1(TAPE : Proofed Tape)	-	0	-
7.2(TAPE : Polyethylene Terephalate (PETP) or Polypropylene Base Tape)	-	0	-
7.3(TAPE )	-	0	-
8(CENTRE)	-	0	-
9.2(FILLERS)	-	0	-
10(CRADLE SEPARATOR)	-	0	-
11.1(ARMOUR)	-	0	-
11.2(ARMOUR)	-	0	-
11.2 a)(ARMOURING: Tensile Strength)	-	0	-
11.2 c)(ARMOURING: Torsion Test (For round wire ) )	-	0	-
11.2 b)(ARMOURING: Elongation )	-	0	-
11.2 d)(ARMOURING: Uniformity of zinc coating)	-	0	-
11.2 e)(ARMOURING: Mass of zinc coating )	-	0	-
12.1(SHEATH : Inner Sheath)	-	0	-
12.2(SHEATH : Outer Sheath)	-	0	-
13.1(REINFORCEMENT MATERIAL : Tape)	-	0	-
13.2(REINFORCEMENT MATERIAL : Cord/Yarns)	-	0	-
14.1(CONSTRUCTION : CONDUCTOR)	-	0	-
14.2(CONSTRUCTION : CONDUCTOR)	-	0	-
14.3(CONSTRUCTION : CONDUCTOR)	-	0	-
14.4(CONSTRUCTION : CONDUCTOR)	-	0	-
15(CONDUCTOR SCREENING)	-	0	-
16.1(INSULATION)	-	0	-
16.2(INSULATION : Thickness of Insulation)	-	0	-
16.3(INSULATION : Tolerance on Insulation Thickness)	-	0	-
16.4(INSULATION : Application of Insulation)	-	0	-
16.5(INSULATION)	-	0	-
17.1(INSULATION SCREEN)	-	0	-
17.2(INSULATION SCREEN)	-	0	-
17.3(INSULATION SCREEN)	-	0	-
17.4(INSULATION SCREEN)	-	0	-
18(PROTECTIVE SCREEN)	-	0	-
19(CONDUCTANCE OF SCREEN)	-	0	-
19.1(Individual Core Screen)	-	0	-
19.2(Collective Screen)	-	0	-
20.1(CORE IDENTIFICATION)	-	0	-
20.2(Colour Scheme for Identification)	-	0	-
20.3(Scheme for Identification by Numbering)	-	0	-
21.1(LAYING UP OF CORES)	-	0	-
21.2(LAYING UP OF CORES)	-	0	-
21.3(LAYING UP OF CORES)	-	0	-
21.4(LAYING UP OF CORES)	-	0	-
22.1(INNER SHEATH)	-	0	-
22.2(Thickness of Inner Sheath)	-	0	-
22.3(INNER SHEATH)	-	0	-
23.1(ARMOURING)	-	0	-
23.2(ARMOURING)	-	0	-
23.3(ARMOURING)	-	0	-
23.4(ARMOURING)	-	0	-
24.1(OUTER SHEATH)	-	0	-
24.2(Thickness of Outer Sheath)	-	0	-
24.3(Tolerance on Thickness of Outer Sheath)	-	0	-
24.4(OUTER SHEATH)	-	0	-
25.1(CABLE CONSTRUCTION AND DIMENSIONS)	-	500	-
27.8(Flammability Test)	-	1000	-
27.9(Water Absorption Test)	-	2000	-
28(IDENTIFICATION)	-	0	-
29.1(PACKING AND MARKING)	-	0	-
29.2(PACKING AND MARKING)	-	0	-
30(BIS CERTIFICATION MARKING)	-	0	-
Table 33®, Annex E(Electric tset on semi-conducting screen)	-	5000	-
Table 33(n), Cl. No. 27.7(High Voltage test for 4 hrs.)	-	1000	-
Table 33(f)(Insulation resistance)	-	1000	-
Table 33(e)(Tear resistance on sheath)	-	2000	-
Table 33(e)(Oil resistance - Elongation on sheath)	-	3000	-
Table 33(e)(Oil resistance - Tensile strength on sheath)	-	3000	-
Table 33(e)(Permanent set on Sheath)	-	500	-
Table 33(e)(Ageing in air bomb - Elongation on Sheath)	-	3000	-
Table 33(e)(Ageing in air bomb - Tensile strength on Sheath)	-	3000	-
Table 33(e)(Elongation at break on Sheath)	-	750	-
Table 33(e)(Tensile strength on Sheath)	-	750	-
Table 33(d)(Ozone resistance on Insulation)	-	5000	-
Table 33(d)(Permanent set on Insulation)	-	500	-
Table 33(d)(Hot set on Insulation)	-	500	-
Table 33(d)(Ageing in air bomb - Elongation on Insulation)	-	3000	-
Table 33(d)(Ageing in air bomb - Tensile strength on Insulation)	-	3000	-
Table 33(d)(Ageing in air oven - Elongation on Insulation)	-	2000	-
Table 33(d)(Ageing in air oven - Tensile strength on Insulation)	-	2000	-
Table 33(d)(Elongation at break on Insulation)	-	500	-
Table 33(d)(Tensile strength on Insulation)	-	500	-
Table 33(c)(Resistivity of steel wire)	-	500	-
Table 33(b)(Diameter of armour wire)	-	500	-
Table 4(Copper purity test)	-	2000	-
Table 33(a)(Conductor resistance test)	-	750	-
Table 33(a)(Annealing test)	-	500	-
4(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
5.1(Power Cores)	-	0	-
5.2(Pilot and Earth Cores)	-	0	-
6(SEMI-CONDUCTING COMPOUND)	-	0	-
7.1(TAPE : Proofed Tape)	-	0	-
7.2(TAPE : Polyethylene Terephalate (PETP) or Polypropylene Base Tape)	-	0	-
7.3(TAPE )	-	0	-
8(CENTRE)	-	0	-
9.2(FILLERS)	-	0	-
10(CRADLE SEPARATOR)	-	0	-
11.1(ARMOUR)	-	0	-
11.2(ARMOUR)	-	0	-
11.2 a)(ARMOURING: Tensile Strength)	-	0	-
11.2 c)(ARMOURING: Torsion Test (For round wire ) )	-	0	-
11.2 b)(ARMOURING: Elongation )	-	0	-
11.2 d)(ARMOURING: Uniformity of zinc coating)	-	0	-
11.2 e)(ARMOURING: Mass of zinc coating )	-	0	-
12.1(SHEATH : Inner Sheath)	-	0	-
12.2(SHEATH : Outer Sheath)	-	0	-
13.1(REINFORCEMENT MATERIAL : Tape)	-	0	-
13.2(REINFORCEMENT MATERIAL : Cord/Yarns)	-	0	-
14.1(CONSTRUCTION : CONDUCTOR)	-	0	-
14.2(CONSTRUCTION : CONDUCTOR)	-	0	-
14.3(CONSTRUCTION : CONDUCTOR)	-	0	-
14.4(CONSTRUCTION : CONDUCTOR)	-	0	-
15(CONDUCTOR SCREENING)	-	0	-
16.1(INSULATION)	-	0	-
16.2(INSULATION : Thickness of Insulation)	-	0	-
16.3(INSULATION : Tolerance on Insulation Thickness)	-	0	-
16.4(INSULATION : Application of Insulation)	-	0	-
16.5(INSULATION)	-	0	-
17.1(INSULATION SCREEN)	-	0	-
17.2(INSULATION SCREEN)	-	0	-
17.3(INSULATION SCREEN)	-	0	-
17.4(INSULATION SCREEN)	-	0	-
18(PROTECTIVE SCREEN)	-	0	-
19(CONDUCTANCE OF SCREEN)	-	0	-
19.1(Individual Core Screen)	-	0	-
19.2(Collective Screen)	-	0	-
20.1(CORE IDENTIFICATION)	-	0	-
20.2(Colour Scheme for Identification)	-	0	-
20.3(Scheme for Identification by Numbering)	-	0	-
21.1(LAYING UP OF CORES)	-	0	-
21.2(LAYING UP OF CORES)	-	0	-
21.3(LAYING UP OF CORES)	-	0	-
21.4(LAYING UP OF CORES)	-	0	-
22.1(INNER SHEATH)	-	0	-
22.2(Thickness of Inner Sheath)	-	0	-
22.3(INNER SHEATH)	-	0	-
23.1(ARMOURING)	-	0	-
23.2(ARMOURING)	-	0	-
23.3(ARMOURING)	-	0	-
23.4(ARMOURING)	-	0	-
24.1(OUTER SHEATH)	-	0	-
24.2(Thickness of Outer Sheath)	-	0	-
24.3(Tolerance on Thickness of Outer Sheath)	-	0	-
24.4(OUTER SHEATH)	-	0	-
25.1(CABLE CONSTRUCTION AND DIMENSIONS)	-	0	-
27.8(Flammability Test)	-	0	-
27.9(Water Absorption Test)	-	0	-
28(IDENTIFICATION)	-	0	-
29.1(PACKING AND MARKING)	-	0	-
29.2(PACKING AND MARKING)	-	0	-
30(BIS CERTIFICATION MARKING)	-	0	-
Table 33®, Annex E(Electric tset on semi-conducting screen)	-	0	-
Table 33(n), Cl. No. 27.7(High Voltage test for 4 hrs.)	-	0	-
Table 33(f)(Insulation resistance)	-	0	-
Table 33(e)(Tear resistance on sheath)	-	0	-
Table 33(e)(Oil resistance - Elongation on sheath)	-	0	-
Table 33(e)(Oil resistance - Tensile strength on sheath)	-	0	-
Table 33(e)(Permanent set on Sheath)	-	0	-
Table 33(e)(Ageing in air bomb - Elongation on Sheath)	-	0	-
Table 33(e)(Ageing in air bomb - Tensile strength on Sheath)	-	0	-
Table 33(e)(Elongation at break on Sheath)	-	0	-
Table 33(e)(Tensile strength on Sheath)	-	0	-
Table 33(d)(Ozone resistance on Insulation)	-	0	-
Table 33(d)(Permanent set on Insulation)	-	0	-
Table 33(d)(Hot set on Insulation)	-	0	-
Table 33(d)(Ageing in air bomb - Elongation on Insulation)	-	0	-
Table 33(d)(Ageing in air bomb - Tensile strength on Insulation)	-	0	-
Table 33(d)(Ageing in air oven - Elongation on Insulation)	-	0	-
Table 33(d)(Ageing in air oven - Tensile strength on Insulation)	-	0	-
Table 33(d)(Elongation at break on Insulation)	-	0	-
Table 33(d)(Tensile strength on Insulation)	-	0	-
Table 33(c)(Resistivity of steel wire)	-	0	-
Table 33(b)(Diameter of armour wire)	-	0	-
Table 4(Copper purity test)	-	0	-
Table 33(a)(Conductor resistance test)	-	0	-
Table 33(a)(Annealing test)	-	0	-
4(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
5.1(Power Cores)	-	0	-
5.2(Pilot and Earth Cores)	-	0	-
6(SEMI-CONDUCTING COMPOUND)	-	0	-
7.1(TAPE : Proofed Tape)	-	0	-
7.2(TAPE : Polyethylene Terephalate (PETP) or Polypropylene Base Tape)	-	0	-
7.3(TAPE )	-	0	-
8(CENTRE)	-	0	-
9.2(FILLERS)	-	0	-
10(CRADLE SEPARATOR)	-	0	-
11.1(ARMOUR)	-	0	-
11.2(ARMOUR)	-	0	-
11.2 a)(ARMOURING: Tensile Strength)	-	0	-
11.2 c)(ARMOURING: Torsion Test (For round wire ) )	-	0	-
11.2 b)(ARMOURING: Elongation )	-	0	-
11.2 d)(ARMOURING: Uniformity of zinc coating)	-	0	-
11.2 e)(ARMOURING: Mass of zinc coating )	-	0	-
12.1(SHEATH : Inner Sheath)	-	0	-
12.2(SHEATH : Outer Sheath)	-	0	-
13.1(REINFORCEMENT MATERIAL : Tape)	-	0	-
13.2(REINFORCEMENT MATERIAL : Cord/Yarns)	-	0	-
14.1(CONSTRUCTION : CONDUCTOR)	-	0	-
14.2(CONSTRUCTION : CONDUCTOR)	-	0	-
14.3(CONSTRUCTION : CONDUCTOR)	-	0	-
14.4(CONSTRUCTION : CONDUCTOR)	-	0	-
15(CONDUCTOR SCREENING)	-	0	-
16.1(INSULATION)	-	0	-
16.2(INSULATION : Thickness of Insulation)	-	0	-
16.3(INSULATION : Tolerance on Insulation Thickness)	-	0	-
16.4(INSULATION : Application of Insulation)	-	0	-
16.5(INSULATION)	-	0	-
17.1(INSULATION SCREEN)	-	0	-
17.2(INSULATION SCREEN)	-	0	-
17.3(INSULATION SCREEN)	-	0	-
17.4(INSULATION SCREEN)	-	0	-
18(PROTECTIVE SCREEN)	-	0	-
19(CONDUCTANCE OF SCREEN)	-	0	-
19.1(Individual Core Screen)	-	0	-
19.2(Collective Screen)	-	0	-
20.1(CORE IDENTIFICATION)	-	0	-
20.2(Colour Scheme for Identification)	-	0	-
20.3(Scheme for Identification by Numbering)	-	0	-
21.1(LAYING UP OF CORES)	-	0	-
21.2(LAYING UP OF CORES)	-	0	-
21.3(LAYING UP OF CORES)	-	0	-
21.4(LAYING UP OF CORES)	-	0	-
22.1(INNER SHEATH)	-	0	-
22.2(Thickness of Inner Sheath)	-	0	-
22.3(INNER SHEATH)	-	0	-
23.1(ARMOURING)	-	0	-
23.2(ARMOURING)	-	0	-
23.3(ARMOURING)	-	0	-
23.4(ARMOURING)	-	0	-
24.1(OUTER SHEATH)	-	0	-
24.2(Thickness of Outer Sheath)	-	0	-
24.3(Tolerance on Thickness of Outer Sheath)	-	0	-
24.4(OUTER SHEATH)	-	0	-
25.1(CABLE CONSTRUCTION AND DIMENSIONS)	-	0	-
27.8(Flammability Test)	-	0	-
27.9(Water Absorption Test)	-	0	-
28(IDENTIFICATION)	-	0	-
29.1(PACKING AND MARKING)	-	0	-
29.2(PACKING AND MARKING)	-	0	-
30(BIS CERTIFICATION MARKING)	-	0	-
Table 33®, Annex E(Electric tset on semi-conducting screen)	-	0	-
Table 33(n), Cl. No. 27.7(High Voltage test for 4 hrs.)	-	0	-
Table 33(f)(Insulation resistance)	-	0	-
Table 33(e)(Tear resistance on sheath)	-	0	-
Table 33(e)(Oil resistance - Elongation on sheath)	-	0	-
Table 33(e)(Oil resistance - Tensile strength on sheath)	-	0	-
Table 33(e)(Permanent set on Sheath)	-	0	-
Table 33(e)(Ageing in air bomb - Elongation on Sheath)	-	0	-
Table 33(e)(Ageing in air bomb - Tensile strength on Sheath)	-	0	-
Table 33(e)(Elongation at break on Sheath)	-	0	-
Table 33(e)(Tensile strength on Sheath)	-	0	-
Table 33(d)(Ozone resistance on Insulation)	-	0	-
Table 33(d)(Permanent set on Insulation)	-	0	-
Table 33(d)(Hot set on Insulation)	-	0	-
Table 33(d)(Ageing in air bomb - Elongation on Insulation)	-	0	-
Table 33(d)(Ageing in air bomb - Tensile strength on Insulation)	-	0	-
Table 33(d)(Ageing in air oven - Elongation on Insulation)	-	0	-
Table 33(d)(Ageing in air oven - Tensile strength on Insulation)	-	0	-
Table 33(d)(Elongation at break on Insulation)	-	0	-
Table 33(d)(Tensile strength on Insulation)	-	0	-
Table 33(c)(Resistivity of steel wire)	-	0	-
Table 33(b)(Diameter of armour wire)	-	0	-
Table 4(Copper purity test)	-	0	-
Table 33(a)(Conductor resistance test)	-	0	-
Table 33(a)(Annealing test)	-	0	-
27.2(Bending test followed by partial discharge test;)	-	0	-
27.4(Dielectric power factor test)	-	0	-
27.5(Heating cycle test followed by partial discharge test;)	-	0	-
27.6(Impulse voltage test; and)	-	0	-
4(CONDUCTOR)	-	0	-
5(INSULATION)	-	0	-
5.1(Power Cores)	-	0	-
5.2(Pilot and Earth Cores)	-	0	-
6(SEMI-CONDUCTING COMPOUND)	-	0	-
7.1(TAPE : Proofed Tape)	-	0	-
7.2(TAPE : Polyethylene Terephalate (PETP) or Polypropylene Base Tape)	-	0	-
7.3(TAPE )	-	0	-
8(CENTRE)	-	0	-
9.2(FILLERS)	-	0	-
10(CRADLE SEPARATOR)	-	0	-
11.1(ARMOUR)	-	0	-
11.2(ARMOUR)	-	0	-
11.2 a)(ARMOURING: Tensile Strength)	-	0	-
11.2 c)(ARMOURING: Torsion Test (For round wire ) )	-	0	-
11.2 b)(ARMOURING: Elongation )	-	0	-
11.2 d)(ARMOURING: Uniformity of zinc coating)	-	0	-
11.2 e)(ARMOURING: Mass of zinc coating )	-	0	-
12.1(SHEATH : Inner Sheath)	-	0	-
12.2(SHEATH : Outer Sheath)	-	0	-
13.1(REINFORCEMENT MATERIAL : Tape)	-	0	-
13.2(REINFORCEMENT MATERIAL : Cord/Yarns)	-	0	-
14.1(CONSTRUCTION : CONDUCTOR)	-	0	-
14.2(CONSTRUCTION : CONDUCTOR)	-	0	-
14.3(CONSTRUCTION : CONDUCTOR)	-	0	-
14.4(CONSTRUCTION : CONDUCTOR)	-	0	-
15(CONDUCTOR SCREENING)	-	0	-
16.1(INSULATION)	-	0	-
16.2(INSULATION : Thickness of Insulation)	-	0	-
16.3(INSULATION : Tolerance on Insulation Thickness)	-	0	-
16.4(INSULATION : Application of Insulation)	-	0	-
16.5(INSULATION)	-	0	-
17.1(INSULATION SCREEN)	-	0	-
17.2(INSULATION SCREEN)	-	0	-
17.3(INSULATION SCREEN)	-	0	-
17.4(INSULATION SCREEN)	-	0	-
18(PROTECTIVE SCREEN)	-	0	-
19(CONDUCTANCE OF SCREEN)	-	0	-
19.1(Individual Core Screen)	-	0	-
19.2(Collective Screen)	-	0	-
20.1(CORE IDENTIFICATION)	-	0	-
20.2(Colour Scheme for Identification)	-	0	-
20.3(Scheme for Identification by Numbering)	-	0	-
21.1(LAYING UP OF CORES)	-	0	-
21.2(LAYING UP OF CORES)	-	0	-
21.3(LAYING UP OF CORES)	-	0	-
21.4(LAYING UP OF CORES)	-	0	-
22.1(INNER SHEATH)	-	0	-
22.2(Thickness of Inner Sheath)	-	0	-
22.3(INNER SHEATH)	-	0	-
23.1(ARMOURING)	-	0	-
23.2(ARMOURING)	-	0	-
23.3(ARMOURING)	-	0	-
23.4(ARMOURING)	-	0	-
24.1(OUTER SHEATH)	-	0	-
24.2(Thickness of Outer Sheath)	-	0	-
24.3(Tolerance on Thickness of Outer Sheath)	-	0	-
24.4(OUTER SHEATH)	-	0	-
25.1(CABLE CONSTRUCTION AND DIMENSIONS)	-	0	-
27.8(Flammability Test)	-	0	-
27.9(Water Absorption Test)	-	0	-
28(IDENTIFICATION)	-	0	-
29.1(PACKING AND MARKING)	-	0	-
29.2(PACKING AND MARKING)	-	0	-
30(BIS CERTIFICATION MARKING)	-	0	-
Table 33®, Annex E(Electric tset on semi-conducting screen)	-	0	-
Table 33(n), Cl. No. 27.7(High Voltage test for 4 hrs.)	-	0	-
Table 33(f)(Insulation resistance)	-	0	-
Table 33(e)(Tear resistance on sheath)	-	0	-
Table 33(e)(Oil resistance - Elongation on sheath)	-	0	-
Table 33(e)(Oil resistance - Tensile strength on sheath)	-	0	-
Table 33(e)(Permanent set on Sheath)	-	0	-
Table 33(e)(Ageing in air bomb - Elongation on Sheath)	-	0	-
Table 33(e)(Ageing in air bomb - Tensile strength on Sheath)	-	0	-
Table 33(e)(Elongation at break on Sheath)	-	0	-
Table 33(e)(Tensile strength on Sheath)	-	0	-
Table 33(d)(Ozone resistance on Insulation)	-	0	-
Table 33(d)(Permanent set on Insulation)	-	0	-
Table 33(d)(Hot set on Insulation)	-	0	-
Table 33(d)(Ageing in air bomb - Elongation on Insulation)	-	0	-
Table 33(d)(Ageing in air bomb - Tensile strength on Insulation)	-	0	-
Table 33(d)(Ageing in air oven - Elongation on Insulation)	-	0	-
Table 33(d)(Ageing in air oven - Tensile strength on Insulation)	-	0	-
Table 33(d)(Elongation at break on Insulation)	-	0	-
Table 33(d)(Tensile strength on Insulation)	-	0	-
Table 33(c)(Resistivity of steel wire)	-	0	-
Table 33(b)(Diameter of armour wire)	-	0	-
Table 4(Copper purity test)	-	0	-
Table 33(a)(Conductor resistance test)	-	0	-
Table 33(a)(Annealing test)	-	0	-
27.2(Bending test followed by partial discharge test;)	-	0	-
27.4(Dielectric power factor test)	-	0	-
27.5(Heating cycle test followed by partial discharge test;)	-	0	-
27.6(Impulse voltage test; and)	-	0	-

11 Apr, 2028

-
Only upto 5kV. Included w.e.f. 08-08-2022.

12604

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

Aluminium conductors for overhead transmission purposes

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	0	20 % Discount to BIS
7.1 Table-1(Dimensional measurement of wires)	-	1000	20 % Discount to BIS
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	1000	20 % Discount to BIS
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	20 % Discount to BIS
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	20 % Discount to BIS
9.1(Stranding)	-	0	20 % Discount to BIS
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	20 % Discount to BIS
9.3(Direction of Lay)	-	0	20 % Discount to BIS
9.4(Multiple layers of wires)	-	0	20 % Discount to BIS
11(Packing and Marking)	-	0	20 % Discount to BIS
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1000	20 % Discount to BIS
12.2 Table 1(Breaking Load Test- After Stranding)	-	1000	20 % Discount to BIS
12.3 Table 1(Elongation Test- Before Stranding)	-	500	20 % Discount to BIS
12.3 Table 1(Elongation Test- After Stranding)	-	1000	20 % Discount to BIS
12.4 Table 1(Resistance of Aluminium wire)	-	1000	20 % Discount to BIS
9.2(Lay Ratio 24 wire layer)	-	500	20 % Discount to BIS
9.2(Lay Ratio 18 wire layer)	-	500	20 % Discount to BIS
9.2(Lay Ratio 12 wire layer)	-	500	20 % Discount to BIS
9.2(Lay Ratio 3/6 wire layer)	-	500	20 % Discount to BIS
6.1(Freedom from Defects)	-	0	-
7.1 Table-1(Dimensional measurement of wires)	-	0	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	0	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	0	-
9.3(Direction of Lay)	-	0	-
9.4(Multiple layers of wires)	-	0	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	0	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	0	-
12.3 Table 1(Elongation Test- Before Stranding)	-	0	-
12.3 Table 1(Elongation Test- After Stranding)	-	0	-
12.4 Table 1(Resistance of Aluminium wire)	-	0	-
6.1(Freedom from Defects)	-	0	-
7.1 Table-1(Dimensional measurement of wires)	-	0	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	0	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	0	-
9.3(Direction of Lay)	-	0	-
9.4(Multiple layers of wires)	-	0	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	0	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	0	-
12.3 Table 1(Elongation Test- Before Stranding)	-	0	-
12.3 Table 1(Elongation Test- After Stranding)	-	0	-
12.4 Table 1(Resistance of Aluminium wire)	-	0	-

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

12605

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

M-30;M-35;M-40;M-50;M-55

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.1.1 (General Quality)	-	400	Discount for BIS@ 15 %
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	400	Discount for BIS@ 15 %
Clause 7.1.3 (Colour and Texture)	-	100	Discount for BIS@ 15 %
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	100	Discount for BIS@ 15 %
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	105	Discount for BIS@ 15 %
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	105	Discount for BIS@ 15 %
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	105	Discount for BIS@ 15 %
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	105	Discount for BIS@ 15 %
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	105	Discount for BIS@ 15 %
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	105	Discount for BIS@ 15 %
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	105	Discount for BIS@ 15 %
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	105	Discount for BIS@ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	105	Discount for BIS@ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	105	Discount for BIS@ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	105	Discount for BIS@ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	105	Discount for BIS@ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	105	Discount for BIS@ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	105	Discount for BIS@ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	105	Discount for BIS@ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	105	Discount for BIS@ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	105	Discount for BIS@ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	105	Discount for BIS@ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	110	Discount for BIS@ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1500	Discount for BIS@ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	1500	Discount for BIS@ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1500	Discount for BIS@ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1500	Discount for BIS@ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	1500	Discount for BIS@ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	1500	Discount for BIS@ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	1500	Discount for BIS@ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	1500	Discount for BIS@ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	1750	Discount for BIS@ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	1750	Discount for BIS@ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	1750	Discount for BIS@ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	1750	Discount for BIS@ 15 %
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	500	Discount for BIS@ 15 %
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	500	Discount for BIS@ 15 %
Clause 7.3, Annex G(Individual Breaking Load)	-	500	Discount for BIS@ 15 %
Clause 7.3, Annex G(Average Breaking Load)	-	500	Discount for BIS@ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	2857	For optional Test -RS,20000 Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	2857	For optional Test -RS,20000 Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	2857	For optional Test -RS,20000 Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	2857	For optional Test -RS,20000 Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	2857	For optional Test -RS,20000 Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	2857	For optional Test -RS,20000 Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	2858	For optional Test -RS,20000 Discount for BIS @ 15 %
Clause 7.1.1 (General Quality)	-	400	Discount for BIS @ 15 %
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	400	Discount for BIS @ 15 %
Clause 7.1.3 (Colour and Texture)	-	100	Discount for BIS @ 15 %
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	100	Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	105	Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	105	Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	105	Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	105	Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	105	Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	105	Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	105	Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	105	Discount for BIS @ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	105	Discount for BIS @ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	105	Discount for BIS @ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	105	Discount for BIS @ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	105	Discount for BIS @ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	105	Discount for BIS @ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	105	Discount for BIS @ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	105	Discount for BIS @ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	105	Discount for BIS @ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	105	Discount for BIS @ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	105	Discount for BIS @ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	110	Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1500	Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	1500	Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1500	Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1500	Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	1500	Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	1500	Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	1500	Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	1500	Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	1750	Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	1750	Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	1750	Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	1750	Discount for BIS @ 15 %
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	500	Discount for BIS @ 15 %
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	500	Discount for BIS @ 15 %
Clause 7.3, Annex G(Individual Breaking Load)	-	500	Discount for BIS @ 15 %
Clause 7.3, Annex G(Average Breaking Load)	-	500	Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	2857	For optional Test -RS,20000 Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	2857	For optional Test -RS,20000 Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	2857	For optional Test -RS,20000 Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	2857	For optional Test -RS,20000 Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	2857	For optional Test -RS,20000 Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	2857	For optional Test -RS,20000 Discount for BIS @ 15 %
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	2857	For optional Test -RS,20000 Discount for BIS @ 15 %
Clause 3.20(Spacer nibs)	-	2857	For optional Test -RS,20000 Discount for BIS @ 15 %
Clause 7.1.1 (General Quality)	-	0	i) Test for these charges is include in dimension ii)Discount for BIS @ 15 %
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	0	i) Test for these charges is include in dimension ii)Discount for BIS @ 15 %
Clause 7.1.3 (Colour and Texture)	-	0	i) Test for these charges is include in dimension ii)Discount for BIS @ 15 %
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	0	i) Test for these charges is include in dimension ii)Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	0	i) Test for these charges is include in dimension ii)Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	0	i) Test for these charges is include in dimension ii)Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	0	i) Test for these charges is include in dimension ii)Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	0	i) Test for these charges is include in dimension ii)Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	0	i) Test for these charges is include in dimension ii)Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	0	i) Test for these charges is include in dimension ii)Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	0	i) Test for these charges is include in dimension ii)Discount for BIS @ 15 %
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	0	i) Test for these charges is include in dimension ii)Discount for BIS @ 15 %
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	0	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	0	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	0	-
Clause 7.3, Annex G(Individual Breaking Load)	-	0	-
Clause 7.3, Annex G(Average Breaking Load)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	0	-
Clause 3.20(Spacer nibs)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	0	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	0	-
Clause 7.1.1 (General Quality)	-	-	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	-	-
Clause 7.1.3 (Colour and Texture)	-	-	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	-	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	-	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	-	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	-	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	-	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	-	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	-	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	-	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	-	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	-	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	-	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	-	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	-	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	-	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	-	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	-	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	-	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	-	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	-	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	-	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	-	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	-	-
Clause 7.3, Annex G(Individual Breaking Load)	-	-	-
Clause 7.3, Annex G(Average Breaking Load)	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	-	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	-	-
Clause 3.20(Spacer nibs)	-	-	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	-	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	-	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	-	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	-	-

-
REVISED VERSION OF IS 15658:2021 INCLUDED W.E.F. 13-04-2022. Amendment No. 1 included w.e.f. 01-02-2023

12606

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Aluminum conductors for overhead transmission purposes

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	1000	Complete test charges by considering all tests Rs 6000/- for ( 25 Sq. mm , 50 Sq. mm & 100 Sq. mm ) and 10000/- for ( 150 Sq. mm , 240 Sq. mm & 300 sq. mm ). ( 20 % Discount to BIS )
12.3, Table-1(Breaking load before stranding)	-	1000	Complete test charges by considering all tests Rs 6000/- for ( 25 Sq. mm , 50 Sq. mm & 100 Sq. mm ) and 10000/- for ( 150 Sq. mm , 240 Sq. mm & 300 sq. mm ). ( 20 % Discount to BIS )
12.3, Table-1(Breaking load after stranding)	-	1000	Complete test charges by considering all tests Rs 6000/- for ( 25 Sq. mm , 50 Sq. mm & 100 Sq. mm ) and 10000/- for ( 150 Sq. mm , 240 Sq. mm & 300 sq. mm ). ( 20 % Discount to BIS )
12.4(Wrapping test)	-	1000	Complete test charges by considering all tests Rs 6000/- for ( 25 Sq. mm , 50 Sq. mm & 100 Sq. mm ) and 10000/- for ( 150 Sq. mm , 240 Sq. mm & 300 sq. mm ). ( 20 % Discount to BIS )
12.5, Table 1(Resistance test)	-	1000	Complete test charges by considering all tests Rs 6000/- for ( 25 Sq. mm , 50 Sq. mm & 100 Sq. mm ) and 10000/- for ( 150 Sq. mm , 240 Sq. mm & 300 sq. mm ). ( 20 % Discount to BIS )
12.6, Table 3(Measurement of lay ratio)	-	1000	Complete test charges by considering all tests Rs 6000/- for ( 25 Sq. mm , 50 Sq. mm & 100 Sq. mm ) and 10000/- for ( 150 Sq. mm , 240 Sq. mm & 300 sq. mm ). ( 20 % Discount to BIS )
9.3(Stranding)	-	0	-
6(Freedom from defects)	-	0	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	0	-
12.3, Table-1(Breaking load before stranding)	-	0	-
12.3, Table-1(Breaking load after stranding)	-	0	-
12.4(Wrapping test)	-	0	-
12.5, Table 1(Resistance test)	-	0	-
12.6, Table 3(Measurement of lay ratio)	-	0	-
9.3(Stranding)	-	0	-
6(Freedom from defects)	-	0	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	0	-
12.3, Table-1(Breaking load before stranding)	-	0	-
12.3, Table-1(Breaking load after stranding)	-	0	-
12.4(Wrapping test)	-	0	-
12.5, Table 1(Resistance test)	-	0	-
12.6, Table 3(Measurement of lay ratio)	-	0	-
9.3(Stranding)	-	0	-
6(Freedom from defects)	-	0	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	0	-
12.3, Table-1(Breaking load before stranding)	-	0	-
12.3, Table-1(Breaking load after stranding)	-	0	-
12.4(Wrapping test)	-	0	-
12.5, Table 1(Resistance test)	-	0	-
12.6, Table 3(Measurement of lay ratio)	-	0	-
9.3(Stranding)	-	0	-
6(Freedom from defects)	-	0	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	0	-
12.3, Table-1(Breaking load before stranding)	-	0	-
12.3, Table-1(Breaking load after stranding)	-	0	-
12.4(Wrapping test)	-	0	-
12.5, Table 1(Resistance test)	-	0	-
12.6, Table 3(Measurement of lay ratio)	-	0	-
9.3(Stranding)	-	0	-
6(Freedom from defects)	-	0	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	0	-
12.3, Table-1(Breaking load before stranding)	-	0	-
12.3, Table-1(Breaking load after stranding)	-	0	-
12.4(Wrapping test)	-	0	-
12.5, Table 1(Resistance test)	-	0	-
12.6, Table 3(Measurement of lay ratio)	-	0	-
9.3(Stranding)	-	0	-
6(Freedom from defects)	-	0	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	0	-
12.3, Table-1(Breaking load before stranding)	-	0	-
12.3, Table-1(Breaking load after stranding)	-	0	-
12.4(Wrapping test)	-	0	-
12.5, Table 1(Resistance test)	-	0	-
12.6, Table 3(Measurement of lay ratio)	-	0	-
9.3(Stranding)	-	0	-
6(Freedom from defects)	-	0	-

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

12607

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 2465 (1984)

Specification for cables for motor vehicles (Second Revision)

Cables for motor vehicles

22950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2, 10.3, 11(Dimensions & thickness )	-	200	10% Discount to BIS
4.2 & 12.1(Without Ageing For Insulation Tensile Strength (N/mm²))	-	500	10% Discount to BIS
3 & 6(Conductor resistance Test (ohm/km at 20˚c))	-	250	10% Discount to BIS
17.1(OZONE RESISTANCE TEST FOR IGNITION CABLES)	-	2000	10% Discount to BIS
4.2 & 12.1, (e), 1(Tensile strength at break)	-	500	10% Discount to BIS
19.1(EFFECT OF OIL ON IGNITION CABLES)	-	2000	10% Discount to BIS
20.3(EFFECT OF LUBRICATING OIL)	-	2000	10% Discount to BIS
18.1(EFFECT OF HEAT ON FLEXIBILITY FOR IGNITION CABLES)	-	1000	10% Discount to BIS
21.1(EFFECT OF COOLING ON FLEXIBILITY)	-	1000	10% Discount to BIS
3 & 6(Persulphate Test)	-	250	10% Discount to BIS
16.1(CAPACITANCE TEST FOR PVC INSULATION IGNITION CABLE)	-	1000	10% Discount to BIS
3 & 6(Diameter of wire(mm))	-	250	10% Discount to BIS
4.2 & 12.1, (f), 1(elongation at break (N/mm²))	-	500	10% Discount to BIS
4.2 & 12.1, (e), 1(elongation test at break)	-	500	10% Discount to BIS
14(High Voltage Test)	-	5000	10% Discount to BIS
7.2, 10.3, 11(Dimensions & thickness )	-	0	-
4.2 & 12.1(Without Ageing For Insulation Tensile Strength (N/mm²))	-	0	-
3 & 6(Conductor resistance Test (ohm/km at 20˚c))	-	0	-
17.1(OZONE RESISTANCE TEST FOR IGNITION CABLES)	-	0	-
4.2 & 12.1, (e), 1(Tensile strength at break)	-	0	-
19.1(EFFECT OF OIL ON IGNITION CABLES)	-	0	-
20.3(EFFECT OF LUBRICATING OIL)	-	0	-
18.1(EFFECT OF HEAT ON FLEXIBILITY FOR IGNITION CABLES)	-	0	-
21.1(EFFECT OF COOLING ON FLEXIBILITY)	-	0	-
3 & 6(Persulphate Test)	-	0	-
16.1(CAPACITANCE TEST FOR PVC INSULATION IGNITION CABLE)	-	0	-
3 & 6(Diameter of wire(mm))	-	0	-
4.2 & 12.1, (f), 1(elongation at break (N/mm²))	-	0	-
4.2 & 12.1, (e), 1(elongation test at break)	-	0	-
14(High Voltage Test)	-	0	-
7.1(Insulation)	-	0	-
7.3(Insulation)	-	0	-
8(Core Identification)	-	0	-
9(Laying up of cores)	-	0	-
10.1.1(Sheathing )	-	0	-
10.2(Sheathing )	-	0	-
3 & 6(Flexibility class)	-	0	-
23.1(Manufacturer's Identification)	-	0	-
24.1(PACKING AND MARKING)	-	0	-
20.3(EFFECT OF BRAKE FLUID)	-	2000	-
20.3(EFFECT OF DIESEL)	-	2000	-
20.3(Increase in average diameter %)	-	2000	-
7.2, 10.3, 11(Dimensions & thickness )	-	0	-
4.2 & 12.1(Without Ageing For Insulation Tensile Strength (N/mm²))	-	0	-
3 & 6(Conductor resistance Test (ohm/km at 20˚c))	-	0	-
17.1(OZONE RESISTANCE TEST FOR IGNITION CABLES)	-	0	-
4.2 & 12.1, (e), 1(Tensile strength at break)	-	0	-
19.1(EFFECT OF OIL ON IGNITION CABLES)	-	0	-
20.3(EFFECT OF LUBRICATING OIL)	-	0	-
18.1(EFFECT OF HEAT ON FLEXIBILITY FOR IGNITION CABLES)	-	0	-
21.1(EFFECT OF COOLING ON FLEXIBILITY)	-	0	-
3 & 6(Persulphate Test)	-	0	-
16.1(CAPACITANCE TEST FOR PVC INSULATION IGNITION CABLE)	-	0	-
3 & 6(Diameter of wire(mm))	-	0	-
4.2 & 12.1, (f), 1(elongation at break (N/mm²))	-	0	-
4.2 & 12.1, (e), 1(elongation test at break)	-	0	-
14(High Voltage Test)	-	0	-
7.1(Insulation)	-	0	-
7.3(Insulation)	-	0	-
8(Core Identification)	-	0	-
9(Laying up of cores)	-	0	-
10.1.1(Sheathing )	-	0	-
10.2(Sheathing )	-	0	-
3 & 6(Flexibility class)	-	0	-
23.1(Manufacturer's Identification)	-	0	-
24.1(PACKING AND MARKING)	-	0	-
20.3(EFFECT OF BRAKE FLUID)	-	0	-
20.3(EFFECT OF DIESEL)	-	0	-
20.3(Increase in average diameter %)	-	0	-
7.2, 10.3, 11(Dimensions & thickness )	-	0	-
4.2 & 12.1(Without Ageing For Insulation Tensile Strength (N/mm²))	-	0	-
3 & 6(Conductor resistance Test (ohm/km at 20˚c))	-	0	-
17.1(OZONE RESISTANCE TEST FOR IGNITION CABLES)	-	0	-
4.2 & 12.1, (e), 1(Tensile strength at break)	-	0	-
19.1(EFFECT OF OIL ON IGNITION CABLES)	-	0	-
20.3(EFFECT OF LUBRICATING OIL)	-	0	-
18.1(EFFECT OF HEAT ON FLEXIBILITY FOR IGNITION CABLES)	-	0	-
21.1(EFFECT OF COOLING ON FLEXIBILITY)	-	0	-
3 & 6(Persulphate Test)	-	0	-
16.1(CAPACITANCE TEST FOR PVC INSULATION IGNITION CABLE)	-	0	-
3 & 6(Diameter of wire(mm))	-	0	-
4.2 & 12.1, (f), 1(elongation at break (N/mm²))	-	0	-
4.2 & 12.1, (e), 1(elongation test at break)	-	0	-
14(High Voltage Test)	-	0	-
7.1(Insulation)	-	0	-
7.3(Insulation)	-	0	-
8(Core Identification)	-	0	-
9(Laying up of cores)	-	0	-
10.1.1(Sheathing )	-	0	-
10.2(Sheathing )	-	0	-
3 & 6(Flexibility class)	-	0	-
23.1(Manufacturer's Identification)	-	0	-
24.1(PACKING AND MARKING)	-	0	-
20.3(EFFECT OF BRAKE FLUID)	-	0	-
20.3(EFFECT OF DIESEL)	-	0	-
20.3(Increase in average diameter %)	-	0	-
7.2, 10.3, 11(Dimensions & thickness )	-	0	-
4.2 & 12.1(Without Ageing For Insulation Tensile Strength (N/mm²))	-	0	-
3 & 6(Conductor resistance Test (ohm/km at 20˚c))	-	0	-
17.1(OZONE RESISTANCE TEST FOR IGNITION CABLES)	-	0	-
4.2 & 12.1, (e), 1(Tensile strength at break)	-	0	-
19.1(EFFECT OF OIL ON IGNITION CABLES)	-	0	-
20.3(EFFECT OF LUBRICATING OIL)	-	0	-
18.1(EFFECT OF HEAT ON FLEXIBILITY FOR IGNITION CABLES)	-	0	-
21.1(EFFECT OF COOLING ON FLEXIBILITY)	-	0	-
3 & 6(Persulphate Test)	-	0	-
16.1(CAPACITANCE TEST FOR PVC INSULATION IGNITION CABLE)	-	0	-
3 & 6(Diameter of wire(mm))	-	0	-
4.2 & 12.1, (f), 1(elongation at break (N/mm²))	-	0	-
4.2 & 12.1, (e), 1(elongation test at break)	-	0	-
14(High Voltage Test)	-	0	-
7.1(Insulation)	-	0	-
7.3(Insulation)	-	0	-
8(Core Identification)	-	0	-
9(Laying up of cores)	-	0	-
10.1.1(Sheathing )	-	0	-
10.2(Sheathing )	-	0	-
3 & 6(Flexibility class)	-	0	-
23.1(Manufacturer's Identification)	-	0	-
24.1(PACKING AND MARKING)	-	0	-
20.3(EFFECT OF BRAKE FLUID)	-	0	-
20.3(EFFECT OF DIESEL)	-	0	-
20.3(Increase in average diameter %)	-	0	-

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

12608

BIS, Central Laboratory (CL)

None

IS 7129 (2021)

POTASSIUM CARBONATE ANHYDROUS SPECIFICATION (Second Revision)

Please see remarks View breakup
• Total testing charges for the Pure Grade: Rs. 7607/- • Total testing charges for the Technical Grade: Rs. 6489/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description)	-
4.3 - Table 1 - Sl No - i (Total Alkalinity (as K2CO3) - Annex A 2)	-
4.3 - Table 1 - Sl No - ii (Potassium bicarbonate (as KHCO3) - Annex A 3)	-
4.3 - Table 1 - Sl No - ii (Free alkali (as KOH)- Annex A 3)	-
4.3 - Table 1 - Sl No - iii (Sulphates (as K2SO4) - Annex A 4)	-
4.3 - Table 1 - Sl No - iv (Chlorides (as KCl) - Annex A 5)	-
4.3 - Table 1 - Sl No - v (Matter insoluble in water - Annex A 6)	-
4.3 - Table 1 - Sl No - vi (Iron (as Fe) - Annex A 7 & A 12)	-
4.3 - Table 1 - Sl No - vii (Heavy metals (as Pb - Annex A 8 & A 12)	-
4.3 - Table 1 - Sl No - viii (Loss on heating at 150oC - Annex A 9)	-
4.3 - Table 1 - Sl No - ix (Sodium (as Na) - Annex A 10 & A 12)	-
4.3 - Table 1 - Sl No - x (Calcium - Annex A 11 & A 12)	-
4.3 - Table 1 - Sl No - xi (Magnesium - Annex A 11 & A 12)	-

-
Test facility is complete for this IS

12609

Matrix Test Labs

8138626

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.6(Marking)	-	2000	10% discount to BIS
21.7(Construction)	-	5000	10% discount to BIS
21.8(Creepage Distance and Clearances)	-	5000	10% discount to BIS
21.9(Provision for earthing)	-	5000	10% discount to BIS
21.10(Terminals)	-	2000	10% discount to BIS
21.11(External & Internal Wiring)	-	5000	10% discount to BIS
21.12(Protection against electric shock)	-	5000	10% discount to BIS
21.13(Endurance Tests and Thermal Tests)	-	15000	10% discount to BIS
21.14(Resistance to Dust & Moisture)	-	10000	10% discount to BIS
21.15(Insulation Resistance and Electric Strength)	-	10000	10% discount to BIS
21.16(Resistance to Heat , fire and tracking)	-	5000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f. 16.11.2022. Electromechanical Contact System (Cl.4.11.6), Photo Biological hazards (Cl.4.24), as per (RD) IS 10322(P1):2014

12610

EAMP Laboratories LLP, Palghar

7171526

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	1000	-
5(Classification of Luminaires')	-	1000	-
6.0(Marking)	-	1000	-
7.0(Construction)	-	2000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	3000	-
12.0(Protection against electric shock)	-	3000	-
13.0(Endurance Tests and Thermal Tests)	-	6000	-
14.0(Resistance to Dust & Moisture)	-	2000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	3000	-

13 Sep, 2028

-
-

12611

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 5820 (1970)

Specification for precast concrete cable covers

LV,HV,HVP,EHV

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4-Table 1(Dimensions-Class)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-Type no.)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-Shape)	-	5000	For complete dimension and qualitative tests.
4-Table 1(Dimensions-L)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-W)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-T)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-T')	-	5000	For complete dimension and qualitative tests
8.2(mpact Strength)	-	5000	For complete dimension and qualitative tests
2.2.1(Size of aggregates)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-Class)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-Type no.)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-Shape)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-L)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-W)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-T)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-T')	-	5000	For complete dimension and qualitative tests
8.2(mpact Strength)	-	5000	For complete dimension and qualitative tests
2.2.1(Size of aggregates)	-	5000	For complete dimension and qualitative tests
6(FINISH)	-	5000	For complete dimension and qualitative tests
6(FINISH)	-	5000	For complete dimension and qualitative tests.
4-Table 1(Dimensions-Class)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-Type no.)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-Shape)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-L)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-W)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-T)	-	5000	For complete dimension and qualitative tests
4-Table 1(Dimensions-T')	-	5000	For complete dimension and qualitative tests
8.2(mpact Strength)	-	5000	For complete dimension and qualitative tests
2.2.1(Size of aggregates)	-	5000	For complete dimension and qualitative tests
6(FINISH)	-	5000	For complete dimension and qualitative tests
6(FINISH)	-	5000	For complete dimension and qualitative tests

-
Included w.e.f. 21-09-2022.

12612

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1264 (1997)

Brass gravity die castings - Specification (Fourth Revision)

Grade DCB1 & DCB2

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Cu)	-	4000	-
7.0(Sn)	-	4000	-
7.0(Pb)	-	4000	-
7.0(Ni)	-	4000	-
7.0(Fe)	-	4000	-
7.0(Al)	-	4000	-
7.0(Mn)	-	4000	-
7.0(Si)	-	4000	-
7.0(Total impurities excluding Ni Pb Al Zn)	-	4000	-
5.0(Freedom from defects)	-	4000	Including Chemical and dimension (if required)

-
Included w.e.f. 21-09-2022.

12613

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

Coarse And Fine Aggregate for concrete 10 mm to 80 mm,

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	1500	-
5.3(Flakiness Index)	-	1250	-
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1500	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1500	-
5.4.2(a)( Aggregates Impact Value)	-	1250	-
5.4.2(b)( Aggregates Impact Value)	-	1250	-
5.4.3(a)( Aggregate Abrasion Value)	-	1000	-
5.4.3(b)( Aggregate Abrasion Value)	-	1000	-
5.5(Soundness By Magnesium Sulphate)	-	2000	-
5.7 table 3(WaterAbsorption)	-	750	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	250	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	1250	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	1500	-
5.3(Flakiness Index)	-	1250	-
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1500	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1500	-
5.4.2(a)( Aggregates Impact Value)	-	1250	-
5.4.2(b)( Aggregates Impact Value)	-	1250	-
5.4.3(a)( Aggregate Abrasion Value)	-	1000	-
5.4.3(b)( Aggregate Abrasion Value)	-	1000	-
5.5(Soundness By Magnesium Sulphate)	-	2000	-
5.7 table 3(WaterAbsorption)	-	750	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	250	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	1250	-
5.7 table 4 (Calcium oxide)	-	500	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	250	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	250	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	250	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	250	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	250	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	250	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	250	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	250	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	250	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	250	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	1500	-
5.3(Flakiness Index)	-	1250	-
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1500	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1500	-
5.4.2(a)( Aggregates Impact Value)	-	1250	-
5.4.2(b)( Aggregates Impact Value)	-	1250	-
5.4.3(a)( Aggregate Abrasion Value)	-	1000	-
5.4.3(b)( Aggregate Abrasion Value)	-	1000	-
5.5(Soundness By Magnesium Sulphate)	-	2000	-
5.7 table 3(WaterAbsorption)	-	750	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	250	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	1250	-
5.7 table 4 (Calcium oxide)	-	500	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	250	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	250	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	250	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	250	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	250	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	250	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	250	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	250	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	250	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	250	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	2000	For complete Alkali reaction and soundness of aggregate
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	2000	For complete Alkali reaction and soundness of aggregate
5.6(Alkali Agregate Reaction )	-	2000	For complete Alkali reaction and soundness of aggregate
Clause 5.6(Nature of Aggregate)	-	2000	For complete Alkali reaction and soundness of aggregate
Clause 5.6(Dissolved Silica)	-	2000	For complete Alkali reaction and soundness of aggregate
Clause 5.6(Reduction in Alkalinity)	-	2000	For complete Alkali reaction and soundness of aggregate

-
Included w.e.f. 21-09-2022.

12614

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

15 to 150 mm

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	250	-
Cl 8(Workmanship)	-	750	-
Cl 8(Workmanship)	-	750	-
Cl 9(Workmanship)	-	1000	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	2000	-
Cl 6(Outer Diameter, Thickness & Mass)	-	250	-
Cl 8(Workmanship)	-	1000	-
Cl 8(Workmanship)	-	1000	-
Cl 9(Workmanship)	-	1000	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	2000	-
Cl 6(Outer Diameter, Thickness & Mass)	-	250	-
Cl 8(Workmanship)	-	1000	-
Cl 8(Workmanship)	-	1000	-
Cl 9(Workmanship)	-	1000	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	2000	-
9(Straightness)	-	500	-
5 AND AS PER IS 10748(COPPER)	-	7500	For complete chemical test - if required
5 AND AS PER IS 10748(MICRO ALLOY)	-	7500	For complete chemical test - if required
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	7500	For complete chemical test - if required
5 AND AS PER IS 10748(CARBON)	-	7500	For complete chemical test - if required
Clause - 5.1, Table-3( ALUMINIUM)	-	7500	For complete chemical test - if required
Clause - 5.1, Table-3(SILICON)	-	7500	For complete chemical test - if required
Clause - 5.1, Table-3(NITROGEN)	-	7500	For complete chemical test - if required
Clause - 5.1, Table-3(MANGANESE)	-	7500	For complete chemical test - if required
Clause - 5.1, Table-3(PHOSPHURS)	-	7500	For complete chemical test - if required
Clause - 5.1, Table-3(SULPHUR)	-	7500	For complete chemical test - if required
Clause - 5.1, Table-3( CARBON)	-	7500	For complete chemical test - if required
Cl 6(Outer Diameter, Thickness & Mass)	-	-	-
Cl 8(Workmanship)	-	-	-
Cl 8(Workmanship)	-	-	-
Cl 9(Workmanship)	-	-	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	-	-
9(Straightness)	-	-	-

-
Included w.e.f. 21-09-2022.

12615

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

8DS20, 8DS21, 9DS20,9DS21,10DS20,10DS21,12DT20,12D21

12250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0(Straightness)	-	1000	-
Cl. 9(Length)	-	2500	-
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	2500	-
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	2500	-
13.1.3(Tensile Strength)	-	2500	-
13.6(Crush Test)	-	1500	-
13.2(Flattening Test)	-	1250	-
13.5(Drift Expansion Test)	-	1500	-
13.3(Bend Test (Strip))	-	1500	-
11.2(Surface Protection)	-	1500	-
4.1(Sulphur-Percentage by mass)	-	2000	-
4.1(Phosphorus-Percentage by mass)	-	2000	-

-
Included w.e.f. 21-09-2022.

12616

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

CF & HF

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	4000	For complete dimensional test
Cl. 14.1(Weight on individual length)	-	500	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	500	-
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete chemical test
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete chemical test
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete chemical test
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete chemical test
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete chemical test
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete chemical test
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete chemical test
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete chemical test
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete chemical test
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete chemical test
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete chemical test
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete chemical test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	4000	For complete Dimensional test
Cl. 14.1(Weight on individual length)	-	500	For weight test
Cl. 14.1(Weight on lots of 10 tonnes min)	-	500	For weight test
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	4000	For complete Dimension test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	4000	For complete Dimension test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	4000	For complete Dimension test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	4000	For complete Dimension test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	4000	For complete Dimension test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	4000	For complete Dimension test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	4000	For complete Dimension test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	4000	For complete Dimension test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	4000	For complete Dimension test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	4000	For complete Dimension test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	4000	For complete Dimension test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	4000	For complete Dimension test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	4000	For complete Dimension test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	4000	For complete Dimension test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	4000	For complete Dimension test
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	3500	For Mechanical Test
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	3500	For Mechanical Test
Cl. 15.2, Table 3(Elongation- IS 1608)	-	3500	For Mechanical Test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	4000	For complete Dimensional test
Cl. 14.1(Weight on individual length)	-	500	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	500	-
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete Chemical test
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete Chemical test
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete Chemical test
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete Chemical test
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete Chemical test
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete Chemical test
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete Chemical test
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete Chemical test
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete Chemical test
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete Chemical test
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete Chemical test
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3500	For complete Chemical test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	4000	For complete Dimensional test
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	4000	For complete Dimensional test
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	3500	For complete mechanical test
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	3500	For complete mechanical test
Cl. 15.2, Table 3(Elongation- IS 1608)	-	3500	For complete mechanical test

-
Included w.e.f. 21-09-2022.

12617

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 6649 (1985)

Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)

M 16 to M 36/ Type A, Type B, Type C

16900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Table-1(Dimensions Type A- d1)	-	5000	For complete dimension test
3 Table-1(Dimensions Type A- d2)	-	5000	For complete dimension test
3 Table-1(Dimensions Type A- S)	-	5000	For complete dimension test
3 Table-2(Dimensions Type B&C- d)	-	5000	For complete dimension test
3 Table-2(Dimensions Type B&C- a)	-	5000	For complete dimension test
3 Table-2(Dimensions Type B&C- t)	-	5000	For complete dimension test
3 Table-2(Dimensions Type B&C- θ)	-	5000	For complete dimension test
7(Hardness)	-	500	-
8.1(Freedom from defect)	-	3400	For Galvanization and qualitative test
8.1(Uniformity of zinc coating)	-	500	For Galvanization and qualitative test
8.1(Mass of zinc coating)	-	500	For Galvanization and qualitative test
8.1(Knife test (Adhesion of coating))	-	5000	For complete dimensional and qualitative tests
3 Table-1(Dimensions Type A- d1)	-	5000	For complete dimensional and qualitative tests
3 Table-1(Dimensions Type A- d2)	-	5000	For complete dimensional and qualitative tests
3 Table-1(Dimensions Type A- S)	-	5000	For complete dimensional and qualitative tests
3 Table-2(Dimensions Type B&C- d)	-	5000	For complete dimensional and qualitative tests
3 Table-2(Dimensions Type B&C- a)	-	5000	For complete dimensional and qualitative tests
3 Table-2(Dimensions Type B&C- t)	-	5000	For complete dimensional and qualitative tests
3 Table-2(Dimensions Type B&C- θ)	-	5000	For complete dimensional and qualitative tests
7(Hardness)	-	500	-
8.1(Freedom from defect)	-	500	-
8.1(Uniformity of zinc coating)	-	500	-
8.1(Mass of zinc coating)	-	500	-
8.1(Knife test (Adhesion of coating))	-	5000	For complete dimensional and qualitative tests
5(Chemical Composition- Sulphur)	-	3000	For complete chemical test
5(Chemical Composition- Phosphorus)	-	3000	For complete test
3 Table-1(Dimensions Type A- d1)	-	5000	For complete dimensional tests
3 Table-1(Dimensions Type A- d2)	-	5000	For complete dimensional tests
3 Table-1(Dimensions Type A- S)	-	5000	For complete dimensional tests
3 Table-2(Dimensions Type B&C- d)	-	5000	For complete dimensional tests
3 Table-2(Dimensions Type B&C- a)	-	5000	For complete dimensional tests
3 Table-2(Dimensions Type B&C- t)	-	5000	For complete dimensional tests
3 Table-2(Dimensions Type B&C- θ)	-	5000	For complete dimensional tests
7(Hardness)	-	500	-
8.1(Freedom from defect)	-	5000	For complete dimension and qualitative tests
8.1(Uniformity of zinc coating)	-	500	-
8.1(Mass of zinc coating)	-	500	-
8.1(Knife test (Adhesion of coating))	-	5000	For complete dimension and qualitative tests
5(Chemical Composition- Sulphur)	-	3000	For complete chemical test - if required
5(Chemical Composition- Phosphorus)	-	3000	For complete chemical test - if required
3 Table-1(Dimensions Type A- d1)	-	5000	For complete dimensional and qualitative tests
3 Table-1(Dimensions Type A- d2)	-	5000	For complete dimensional and qualitative tests
3 Table-1(Dimensions Type A- S)	-	5000	For complete dimensional and qualitative tests
3 Table-2(Dimensions Type B&C- d)	-	5000	For complete dimensional and qualitative tests
3 Table-2(Dimensions Type B&C- a)	-	5000	For complete dimensional and qualitative tests
3 Table-2(Dimensions Type B&C- t)	-	5000	For complete dimensional and qualitative tests
3 Table-2(Dimensions Type B&C- θ)	-	5000	For complete dimensional and qualitative tests
7(Hardness)	-	7000	For complete mechanical tests
8.1(Freedom from defect)	-	5000	For complete dimensional and qualitative tests
8.1(Uniformity of zinc coating)	-	500	-
8.1(Mass of zinc coating)	-	500	-
8.1(Knife test (Adhesion of coating))	-	5000	For complete dimensional and qualitative tests
5(Chemical Composition- Sulphur)	-	3000	For complete chemical tests - if required
5(Chemical Composition- Phosphorus)	-	3000	For complete chemical tests - if required

-
Included w.e.f. 21-09-2022.

12618

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 12592 (2002)

Precast concrete manhole cover and frame - Specification (First Revision)

Light Duty, Heavy Duty, Medium Duty, Extra Heavy Duty

14820 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2 and Table 1(Dimensions of Frame - A)	-	10000	For complete dimensional tests and finish
5.2 and Table 1(Dimensions of Frame - B)	-	10000	For complete dimensional tests and finish
5.2 and Table 1(Dimensions of Frame - C)	-	10000	For complete dimensional tests
5.2 and Table 1(Dimensions of Frame - D)	-	10000	For complete dimensional tests
5.2 and Table 1(Dimensions of Frame - E)	-	10000	For complete dimensional tests
5.2 and Table 1(Dimensions of Frame - F)	-	10000	For complete dimensional tests
5.2(Dimensions of cover- Diameter)	-	10000	-
5.2(Clearance at top between the frame and the cover all round the periphery)	-	10000	-
5.2(Top surface ofthe frame and cover is in level)	-	10000	-
5.2(Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover)	-	10000	-
5.2 and Fig 1(Clear cover to reinforcement)	-	10000	-
5.2 and Fig 1(Distance of housing from the edge)	-	10000	For complete dimensional tests
7.4.1(Edge Protection and Finishing - Frame)	-	10000	For complete dimensional tests
7.4.1(Edge Protection and Finishing - Frame)	-	10000	-
7.4.2(Edge Protection and Finishing - Cover)	-	10000	-
7.4.2(Edge Protection and Finishing - Cover)	-	10000	-
7.4.2(Edge Protection and Finishing - Cover)	-	10000	For complete dimensional tests
7.4.2(Edge Protection and Finishing - Cover)	-	10000	-
9.3 and Table and Annex C(Load Test)	-	8500	-
5.2 and Table 1(Dimensions of Frame - A)	-	10000	For complete dimensional tests
5.2 and Table 1(Dimensions of Frame - B)	-	10000	For complete dimensional tests
5.2 and Table 1(Dimensions of Frame - C)	-	10000	For complete dimensional tests
5.2 and Table 1(Dimensions of Frame - D)	-	10000	-
5.2 and Table 1(Dimensions of Frame - E)	-	10000	For complete dimensional tests
5.2 and Table 1(Dimensions of Frame - F)	-	10000	For complete dimensional tests
5.2(Dimensions of cover- Diameter)	-	10000	For complete dimensional tests and finish
5.2(Clearance at top between the frame and the cover all round the periphery)	-	10000	For complete dimensional tests
5.2(Top surface ofthe frame and cover is in level)	-	10000	For complete dimensional tests
5.2(Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover)	-	10000	For complete dimensional tests
5.2 and Fig 1(Clear cover to reinforcement)	-	10000	For complete dimensional tests and finish
5.2 and Fig 1(Distance of housing from the edge)	-	10000	For complete dimensional tests
7.4.1(Edge Protection and Finishing - Frame)	-	10000	For complete dimensional tests
7.4.1(Edge Protection and Finishing - Frame)	-	10000	For complete dimensional tests
7.4.2(Edge Protection and Finishing - Cover)	-	10000	For complete dimensional tests
7.4.2(Edge Protection and Finishing - Cover)	-	10000	For complete dimensional tests and finish
7.4.2(Edge Protection and Finishing - Cover)	-	10000	-
7.4.2(Edge Protection and Finishing - Cover)	-	10000	For complete dimensional tests and finish
9.3 and Table and Annex C(Load Test)	-	8500	-
8(LIFTING HOOKS)	-	10000	For complete dimensional tests and finish
8(LIFTING HOOKS)	-	10000	For complete dimensional tests and finish
5.2 and Table 1(Dimensions of Frame - A)	-	10000	For complete dimensional tests and finish
5.2 and Table 1(Dimensions of Frame - B)	-	10000	For complete dimensional tests and finish
5.2 and Table 1(Dimensions of Frame - C)	-	10000	For complete dimensional tests and finish
5.2 and Table 1(Dimensions of Frame - D)	-	10000	For complete dimensional tests and finish
5.2 and Table 1(Dimensions of Frame - E)	-	10000	For complete dimensional tests and finish
5.2 and Table 1(Dimensions of Frame - F)	-	10000	For complete dimensional tests and finish
5.2(Dimensions of cover- Diameter)	-	10000	For complete dimensional tests and finish
5.2(Clearance at top between the frame and the cover all round the periphery)	-	10000	For complete dimensional tests and finish
5.2(Top surface ofthe frame and cover is in level)	-	10000	For complete dimensional tests and finish
5.2(Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover)	-	10000	For complete dimensional tests and finish
5.2 and Fig 1(Clear cover to reinforcement)	-	10000	For complete dimensional tests and finish
5.2 and Fig 1(Distance of housing from the edge)	-	10000	For complete dimensional tests and finish
7.4.1(Edge Protection and Finishing - Frame)	-	10000	For complete dimensional tests and finish
7.4.1(Edge Protection and Finishing - Frame)	-	10000	For complete dimensional tests and finish
7.4.2(Edge Protection and Finishing - Cover)	-	10000	For complete dimensional tests and finish
7.4.2(Edge Protection and Finishing - Cover)	-	10000	For complete dimensional tests and finish
7.4.2(Edge Protection and Finishing - Cover)	-	10000	For complete dimensional tests and finish
7.4.2(Edge Protection and Finishing - Cover)	-	10000	For complete dimensional tests and finish
9.3 and Table and Annex C(Load Test)	-	8500	-
8(LIFTING HOOKS)	-	10000	For complete dimensional tests and finish
8(LIFTING HOOKS)	-	10000	For complete dimensional tests and finish

-
Included w.e.f. 21-09-2022.

12619

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 13095 (2020)

Butterfly Valves for General Purposes ( First Revision )

50 mm to 650 mm

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0( NOMINAL SIZES )	-	2500	For dimensional and qualitative Tests
7.0(NOMINAL PRESSURES)	-	5000	For complete hydrostatic test
9.1.1 ( Double Flanged Body Ends)	-	2500	For dimensional and qualitative Tests
9.2.2(Wafer Body Ends)	-	2500	For dimensional and qualitative Tests
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-	2500	For dimensional and qualitative Tests
11.0(Bodies)	-	2500	For dimensional and qualitative Tests
12.0(DISC AND SHAFT)	-	2500	For dimensional and qualitative Tests
14.0(BEARINGS)	-	2500	For dimensional and qualitative Tests
14.2(BEARINGS)	-	2500	For dimensional and qualitative Tests
14.3(BEARINGS)	-	2500	For dimensional and qualitative Tests
17.2(Body Test)	-	5000	For complete Hydrostatic Tests
17.4(Disc Strength Test)	-	5000	For complete Hydrostatic Tests
17.3(Seat Test)	-	5000	For complete Hydrostatic Tests
Cl. 15 Table 2(Materials)	-	7500	For each component (CI, Stainless Steel) - If required
6.0( NOMINAL SIZES )	-	2500	For dimensional and qualitative Tests
7.0(NOMINAL PRESSURES)	-	5000	For complete hydrostatic test
9.1.1 ( Double Flanged Body Ends)	-	2500	For dimensional and qualitative Tests
9.2.2(Wafer Body Ends)	-	2500	For dimensional and qualitative Tests
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-	2500	For dimensional and qualitative Tests
11.0(Bodies)	-	2500	For dimensional and qualitative Tests
12.0(DISC AND SHAFT)	-	2500	For dimensional and qualitative Tests
14.0(BEARINGS)	-	2500	For dimensional and qualitative Tests
14.2(BEARINGS)	-	2500	For dimensional and qualitative Tests
14.3(BEARINGS)	-	2500	For dimensional and qualitative Tests
17.2(Body Test)	-	5000	For complete Hydrostatic Tests
17.4(Disc Strength Test)	-	5000	For complete Hydrostatic Tests
17.3(Seat Test)	-	5000	For complete Hydrostatic Tests
Cl. 15 Table 2(Materials)	-	7500	For each component (CI, Stainless Steel) - If required
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Flange-b)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-d4)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-f)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Bolting )	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -Nos. )	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -d2)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -k)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck -d3)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck- r)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-b)	-	2000	--
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-d4)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-f)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Bolting)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -Nos. )	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -d2 )	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -k)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck -d3)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck-r)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - D)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - b)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - d4)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - f)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Bolting)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling - Nos.)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -d2)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -k)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange -D)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange - b)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - d4)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - f)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Bolting)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling - Nos.)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -d2)	-	2000	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -k)	-	2000	-

-
-

12620

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 14329 (1995)

Malleable iron castings - Specification

WM350 and WM400,BM300, BM320 and BM350, PM 450 to PM700

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.1, 10.1, Table 1(Nominal diameter)	-	250	-
9.2.1, 10.1, Table 1(Tolerances on nominal diameter)	-	2000	-
9.2.1, 10.1, Table 1(Shank Dimensions, Diameter)	-	2000	-
9.2.1, 10.1, Table 1(Shank Dimensions, Length)	-	2000	-
9.2.1, 10.1, Table 1(Gauge length)	-	2000	-
9.2.1, 10.1, Table 1(Length)	-	2000	-
9.2.1, 10.1, Table 1(Radius at shoulder)	-	2000	-
10.1(Tensile Test)	-	2000	-
10.2(Hardness Test)	-	500	-
8.0(FREEDOM FROM DEFECTS)	-	500	For complete hardness and qualitative tests

-
Included w.e.f. 21-09-2022.

12621

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

Water for Construction Purpose,Compressive strength fo

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Average Compressive Strength)	-	2500	-
16.1(Average Compressive Strength)	-	2500	-
Cl 5.4 .2(pH)	-	300	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	300	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	300	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	300	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	300	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	1100	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	1100	-
16.1(Average Compressive Strength)	-	2500	-
Cl 5.4 .2(pH)	-	300	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	300	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	300	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	300	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	300	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	1100	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	1100	-
Cl 5.4 Table 1 (iv)(Chloride)	-	300	-

-
Included w.e.f. 21-09-2022.

12622

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 410 (1977)

Specification for cold rolled brass sheet, strip and foil (Third Revision)

Annealed, Quarter Hard, Half Hard, Hard, Extra Hard, Sp

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Tensile Test)	-	2000	For tensile and elongation test
Table-2(Vickers Hardness)	-	500	-
6.1 Table-1(Cu)	-	2000	-
Table-2(Thickness)	-	750	-
6.1 Table-1(Pb)	-	2000	-
6.1 Table-1(Fe)	-	2000	-
6.1 Table-1(Total impurities including iron)	-	2000	-
6.1 Table-1(Zn)	-	2000	-
4.0(Freedom from defects)	-	2000	-
Table-2(Elongation)	-	2000	For tensile and elongation test

-
Included w.e.f. 21-09-2022.

12623

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 16176 (2014)

Ratchet pipe threader for taper pipe threads (R - Series) - Specification

.½” to 6”

13700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	9000	For complete dimensional and qualitative tests.
6.2(Hardness)	-	700	-
9.1(Performance of thread testing)	-	4000	For complete thread parameters testing
4(Dimensions)	-	9000	For complete dimensional and qualitative tests.
6.2(Hardness)	-	700	For Hardness Test
9.1(Performance of thread testing)	-	4000	For complete thread parameters testing
7(Workmanship & Finish)	-	9000	For complete dimensional and qualitative tests.
5(Materials)	-	3500	For complete chemical tests (if required)
9.4(Measurement of gauging of threads)	-	4000	For complete gauging parameters test
9.3(Measurement of length of external thread)	-	4000	For complete gauging parameters test
9.2(Cutting of threads on a pipe testing)	-	4000	For complete gauging parameters test
6.3(To check the functioning of ratchet handle by rotating the locking pin 180°.)	-	9000	For complete dimensional and qualitative tests.
6.1(Manufacturing Quality (Visual))	-	9000	For complete dimensional and qualitative tests.
4(Dimensions)	-	-	-
6.2(Hardness)	-	-	-
9.1(Performance of thread testing)	-	-	-
7(Workmanship & Finish)	-	-	-
5(Materials)	-	-	-
9.4(Measurement of gauging of threads)	-	-	-
9.3(Measurement of length of external thread)	-	-	-
9.2(Cutting of threads on a pipe testing)	-	-	-
6.3(To check the functioning of ratchet handle by rotating the locking pin 180°.)	-	-	-
6.1(Manufacturing Quality (Visual))	-	-	-

-
Included w.e.f. 21-09-2022.

12624

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

Annealed (Soft)(O),Half Hard(HB) and Hard (HD),GR 1,GR2

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Dimension and Tolerances)	-	2500	For complete dimension and qualitative tests.
9.1 Table-2(Tensile Strength)	-	2500	-
9.2(Vickers Hardness)	-	2500	-
8.1 Table 1(Cu)	-	3000	For complete chemical tests
8.1 Table 1(Pb)	-	3000	For complete chemical tests
8.1 Table 1(Fe)	-	3000	-
8.1 Table 1(Total other impurities excluding iron)	-	3000	For complete chemical tests
8.1 Table 1(Zn)	-	3000	For complete chemical tests
10.1(Mercurous Nitrate Test)	-	3000	For complete chemical tests
5.0(Freedom from defects)	-	2500	For complete dimension and qualitative tests.

-
Included w.e.f. 21-09-2022.

12625

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS/IEC 60730 : Part 2 : Sec 9 (2011)

Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing Controls

81500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	400	10 % Discount for BIS
9(By inspection)	-	400	10 % Discount for BIS
9.1.1(By inspection)	-	400	10 % Discount for BIS
9.1.2(By inspection)	-	400	10 % Discount for BIS
9.1.3(By inspection)	-	400	10 % Discount for BIS
9.2(By inspection)	-	400	10 % Discount for BIS
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	400	10 % Discount for BIS
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	10 % Discount for BIS
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	10 % Discount for BIS
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	10 % Discount for BIS
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	10 % Discount for BIS
9.4(by inspection and by plating)	-	400	10 % Discount for BIS
9.4.1(by inspection)	-	400	10 % Discount for BIS
9.4.2(by inspection)	-	400	10 % Discount for BIS
9.5.1(by inspection)	-	400	10 % Discount for BIS
9.5.2(by inspection)	-	400	10 % Discount for BIS
10.1.1(By inspection and as per IEC 60988-2-2)	-	400	10 % Discount for BIS
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	400	10 % Discount for BIS
10.1.2(By inspection )	-	400	10 % Discount for BIS
10.1.3(By inspection )	-	400	10 % Discount for BIS
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	400	10 % Discount for BIS
10.1.5(By measurement)	-	400	10 % Discount for BIS
10.1.5.1(by inspection, by measurement, by torque test)	-	400	10 % Discount for BIS
10.1.6(by inspection after cl 10.1.5)	-	400	10 % Discount for BIS
10.1.7(by inspection)	-	400	10 % Discount for BIS
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	400	10 % Discount for BIS
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	400	10 % Discount for BIS
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	400	10 % Discount for BIS
10.1.11(By inspection)	-	400	10 % Discount for BIS
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	400	10 % Discount for BIS
10.1.13(By inspection and after the test of cl 17)	-	400	10 % Discount for BIS
10.1.14(By inspection)	-	400	10 % Discount for BIS
10.1.15(Figure 11 or 12)	-	400	10 % Discount for BIS
10.2(By inspection)	-	400	10 % Discount for BIS
10.2.1(Table 10.2.1)	-	400	10 % Discount for BIS
10.2.2(By inspection)	-	400	10 % Discount for BIS
10.2.3(By inspection)	-	400	10 % Discount for BIS
10.2.4.1(Figure 14 or 15)	-	400	10 % Discount for BIS
10.2.4.2(During the test of cl 14)	-	400	10 % Discount for BIS
10.2.4.3(As per table 10.2.4.3)	-	400	10 % Discount for BIS
10.2.4.4(As per Figure 16)	-	400	10 % Discount for BIS
11.1(By inspection)	-	400	10 % Discount for BIS
11.1.1(By inspection)	-	400	10 % Discount for BIS
11.1.2(by inspection and by analysis of the material)	-	400	10 % Discount for BIS
11.1.3(by inspection)	-	400	10 % Discount for BIS
11.2(by inspection and by test)	-	400	10 % Discount for BIS
11.2.2(by inspection, by measurement and/or by manual test)	-	400	10 % Discount for BIS
11.2.3(by inspection, by measurement and/or by manual test)	-	400	10 % Discount for BIS
11.2.3.2(by inspection, by measurement and/or by manual test)	-	400	10 % Discount for BIS
11.2.4(as per lEC 60227 or IEC 60245.)	-	400	10 % Discount for BIS
11.2.5(As per annexure H, cl 11.2.5)	-	400	10 % Discount for BIS
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	400	10 % Discount for BIS
11.3.2(by inspection and by the tests of clauses 13)	-	400	10 % Discount for BIS
11.3.3(by inspection)	-	400	10 % Discount for BIS
11.3.4(by inspection)	-	400	10 % Discount for BIS
11.3.5(by inspection)	-	400	10 % Discount for BIS
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	400	10 % Discount for BIS
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	400	10 % Discount for BIS
11.3.8(by inspection)	-	400	10 % Discount for BIS
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	400	10 % Discount for BIS
11.4.1 (by inspection)	-	400	10 % Discount for BIS
11.4.2(by inspection)	-	400	10 % Discount for BIS
11.4.3(by the tests of clauses 15 to 17)	-	400	10 % Discount for BIS
11.4.4 to 11.4.16(As per relevent type)	-	400	10 % Discount for BIS
11.5(by inspection)	-	400	10 % Discount for BIS
11.6.1(by inspection and by manual test)	-	400	10 % Discount for BIS
11.6.2(by inspection and by manual test)	-	400	10 % Discount for BIS
11.6.3.1(By inspection)	-	400	10 % Discount for BIS
11.6.3.2(By inspection)	-	400	10 % Discount for BIS
11.6.3.3(By inspection)	-	400	10 % Discount for BIS
11.6.3.4(By inspection)	-	400	10 % Discount for BIS
11.6.3.5(By inspection)	-	400	10 % Discount for BIS
11.6.3.6(By inspection)	-	400	10 % Discount for BIS
11.6.3.7(By inspection)	-	400	10 % Discount for BIS
11.7.1(By Flexing test as per fig 9)	-	400	10 % Discount for BIS
11.7.1.2.2(By Flexing test as per fig 9)	-	400	10 % Discount for BIS
11.7.1.2.3(By Flexing test as per fig 9)	-	400	10 % Discount for BIS
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	400	10 % Discount for BIS
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	400	10 % Discount for BIS
11.8(By inspection)	-	400	10 % Discount for BIS
11.8.1(By inspection)	-	400	10 % Discount for BIS
11.8.2(By inspection and as per table 11.8.2)	-	400	10 % Discount for BIS
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	400	10 % Discount for BIS
11.9.1(By inspection)	-	400	10 % Discount for BIS
11.9.1.1(by inspection and manual test)	-	400	10 % Discount for BIS
11.9.1.2(by inspection and manual test)	-	400	10 % Discount for BIS
11.9.1.3(by inspection and manual test)	-	400	10 % Discount for BIS
11.9.1.4(by inspection and manual test)	-	400	10 % Discount for BIS
11.10.1(by inspection)	-	400	10 % Discount for BIS
11.10.2(by inspection)	-	400	10 % Discount for BIS
11.10.3(by inspection and by test of socket-outlet system)	-	400	10 % Discount for BIS
11.11(Requirements during mounting, maintenance and servicing)	-	400	10 % Discount for BIS
11.11.1(By inspection)	-	400	10 % Discount for BIS
11.11.1.1(By inspection)	-	400	10 % Discount for BIS
11.11.1.2(By inspection)	-	400	10 % Discount for BIS
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	400	10 % Discount for BIS
11.11.1.5.4(By inspection)	-	400	10 % Discount for BIS
11.11.1.5.6(by pull test)	-	400	10 % Discount for BIS
11.11.2(By inspection)	-	400	10 % Discount for BIS
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	10 % Discount for BIS
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	10 % Discount for BIS
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	10 % Discount for BIS
11.11.4(By inspection)	-	400	10 % Discount for BIS
11.11.5(By inspection and by manual test)	-	400	10 % Discount for BIS
11.11.6(By inspection)	-	400	10 % Discount for BIS
11.11.7(By inspection)	-	400	10 % Discount for BIS
11.12(As per H, cl 11.12)	-	400	10 % Discount for BIS
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	400	10 % Discount for BIS
11.1.102(As per IEC 60216-1:2001)	-	400	10 % Discount for BIS
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	400	10 % Discount for BIS
11.4.101(as per cl 11.4.101)	-	400	10 % Discount for BIS
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	400	10 % Discount for BIS
11.4.107(As per annexure DD)	-	400	10 % Discount for BIS
11.6.3.101(As per table 7, item 117)	-	400	10 % Discount for BIS
11.101(As per annexure BB)	-	400	10 % Discount for BIS
12.1(As per IEC 60529)	-	400	10 % Discount for BIS
12.1.6.2(Torque test)	-	400	10 % Discount for BIS
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	400	10 % Discount for BIS
12.3(as per cl 12.3.1 to 12.3.7)	-	400	10 % Discount for BIS
12.101(None)	-	400	10 % Discount for BIS
12.101.2(15 K+Tmax for 16 hr)	-	400	10 % Discount for BIS
12.101.5(as per 12.103 to 12.105)	-	400	10 % Discount for BIS
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	400	10 % Discount for BIS
13.1(as per table 13.1)	-	400	10 % Discount for BIS
13.2(As per table 13.2)	-	400	10 % Discount for BIS
13.3.1 to 13.3.4(as per clause 13.3.4)	-	400	10 % Discount for BIS
14.1(As per table 14.1)	-	400	10 % Discount for BIS
14.3(As per table 14.1)	-	400	10 % Discount for BIS
14.101.1( as per cl 14.102 and 14.102.1)	-	400	10 % Discount for BIS
15(as per cl 15.1 to 15.4)	-	400	10 % Discount for BIS
15.5(as per cl 15.5 to 15.6)	-	400	10 % Discount for BIS
15.6.4(42 of table 7.2, and as per annexure AA)	-	400	10 % Discount for BIS
15.7(as per annexure J, cl 15.7)	-	400	10 % Discount for BIS
15.5.3.101 to 15.5.3.105(According to type of control)	-	400	10 % Discount for BIS
15.5.3.109( voltage specified in Table 13.2)	-	400	10 % Discount for BIS
16.2(as per cl 16.2.1 to 16.2.3 )	-	400	10 % Discount for BIS
16.2.4(test of cl 15 repeated )	-	400	10 % Discount for BIS
16.2.4(42 of table 7.2)	-	400	10 % Discount for BIS
18.1.6(By inspection)	-	400	10 % Discount for BIS
18.1.6.1(By inspection)	-	400	10 % Discount for BIS
18.1.6.2(By inspection)	-	400	10 % Discount for BIS
18.1.6.3(Pull test as per cl 18.1.6.3)	-	400	10 % Discount for BIS
18.2(Impact tester)	-	400	10 % Discount for BIS
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	400	10 % Discount for BIS
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	400	10 % Discount for BIS
18.7(Pull test as per table 18.7)	-	400	10 % Discount for BIS
18.8(as per cl 18.8.2 and 18.8.3)	-	400	10 % Discount for BIS
18.9(axial pull of 15N/30N)	-	400	10 % Discount for BIS
18.101(as per cl 18.101.2 and 101.3)	-	400	10 % Discount for BIS
18.102(Hydrualic test)	-	400	10 % Discount for BIS
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.2.1(By inspection)	-	400	10 % Discount for BIS
19.2.2(By inspection)	-	400	10 % Discount for BIS
19.2.3(By inspection)	-	400	10 % Discount for BIS
19.2.4(By inspection)	-	400	10 % Discount for BIS
19.2.4.1(By inspection)	-	400	10 % Discount for BIS
19.2.5(By inspection)	-	400	10 % Discount for BIS
19.2.5.1(By inspection)	-	400	10 % Discount for BIS
19.2.6(By inspection)	-	400	10 % Discount for BIS
20.1(as per table 20.2)	-	400	10 % Discount for BIS
20.2.1(as per table 20.3)	-	400	10 % Discount for BIS
20.2.2(as per table 20.4)	-	400	10 % Discount for BIS
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	400	10 % Discount for BIS
21.2.7(As per cl G.4)	-	400	10 % Discount for BIS
22.1.1(As per cl 21.1.3 to 21.1.6)	-	400	10 % Discount for BIS
25(as per annexure H)	-	400	10 % Discount for BIS
27.1(as per annexure H)	-	400	10 % Discount for BIS
27.2(as per cl 27.2.1 and 27.2.2)	-	400	10 % Discount for BIS
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	400	10 % Discount for BIS
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	400	10 % Discount for BIS
10.1.7.1(by inspection)	-	400	10 % Discount for BIS
11.7.2.11 to 11.7.2.15(By measurement)	-	400	10 % Discount for BIS
5(By inspection)	-	400	10 % Discount for BIS
5.1(By inspection)	-	400	10 % Discount for BIS
5.2(By inspection)	-	400	10 % Discount for BIS
6.1(By inspection)	-	400	10 % Discount for BIS
6.2(By inspection)	-	400	10 % Discount for BIS
6.3(By inspection)	-	400	10 % Discount for BIS
6.4(By inspection)	-	400	10 % Discount for BIS
6.5(By inspection)	-	400	10 % Discount for BIS
6.5.1(IEC 60529 and by inspection)	-	400	10 % Discount for BIS
6.5.2(IEC 60529 and by inspection)	-	400	10 % Discount for BIS
6.5.3(Annexure N and by inspection)	-	400	10 % Discount for BIS
6.6(By inspection)	-	400	10 % Discount for BIS
6.7.1(By inspection)	-	400	10 % Discount for BIS
6.7.2(By inspection)	-	400	10 % Discount for BIS
6.8(By inspection)	-	400	10 % Discount for BIS
6.8.2(By inspection)	-	400	10 % Discount for BIS
6.9(Annexure H and by inspection)	-	400	10 % Discount for BIS
6.1(By inspection)	-	400	10 % Discount for BIS
6.11(By inspection)	-	400	10 % Discount for BIS
6.12(By inspection)	-	400	10 % Discount for BIS
6.13(By inspection)	-	400	10 % Discount for BIS
6.14(By inspection)	-	400	10 % Discount for BIS
6.15(Annexure J and by inspection)	-	400	10 % Discount for BIS
6.16(By inspection)	-	400	10 % Discount for BIS
6.18(Annexure H)	-	400	10 % Discount for BIS
6.17(Annexure H)	-	400	10 % Discount for BIS
6.4.3(By inspection)	-	400	10 % Discount for BIS
H 17.1.4.2(as per cl H 17.1.4.2)	-	400	10 % Discount for BIS
H.17.14(as per cl H 17.4.16)	-	400	10 % Discount for BIS
J 17.18.5(as per cl J 17.8.5)	-	400	10 % Discount for BIS
J 17.18.5(as per cl J 17.8.6)	-	400	10 % Discount for BIS
J 17.17.2(as per table 13.1)	-	400	10 % Discount for BIS
J 17.17(As per table 13.2)	-	400	10 % Discount for BIS
J. 17. 18.2(as per cl J. 17. 18.2)	-	400	10 % Discount for BIS
J. 17. 18.3(as per cl J. 17. 18.3)	-	400	10 % Discount for BIS
J. 17. 18.4(as per cl J. 17. 18.4)	-	400	10 % Discount for BIS
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	400	-
9(By inspection)	-	400	-
9.1.1(By inspection)	-	400	-
9.1.2(By inspection)	-	400	-
9.1.3(By inspection)	-	400	-
9.2(By inspection)	-	400	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	400	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.4(by inspection and by plating)	-	400	-
9.4.1(by inspection)	-	400	-
9.4.2(by inspection)	-	400	-
9.5.1(by inspection)	-	400	-
9.5.2(by inspection)	-	400	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.2(By inspection )	-	400	-
10.1.3(By inspection )	-	400	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	400	-
10.1.5(By measurement)	-	400	-
10.1.5.1(by inspection, by measurement, by torque test)	-	400	-
10.1.6(by inspection after cl 10.1.5)	-	400	-
10.1.7(by inspection)	-	400	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	400	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	400	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	400	-
10.1.11(By inspection)	-	400	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	400	-
10.1.13(By inspection and after the test of cl 17)	-	400	-
10.1.14(By inspection)	-	400	-
10.1.15(Figure 11 or 12)	-	400	-
10.2(By inspection)	-	400	-
10.2.1(Table 10.2.1)	-	400	-
10.2.2(By inspection)	-	400	-
10.2.3(By inspection)	-	400	-
10.2.4.1(Figure 14 or 15)	-	400	-
10.2.4.2(During the test of cl 14)	-	400	-
10.2.4.3(As per table 10.2.4.3)	-	400	-
10.2.4.4(As per Figure 16)	-	400	-
11.1(By inspection)	-	400	-
11.1.1(By inspection)	-	400	-
11.1.2(by inspection and by analysis of the material)	-	400	-
11.1.3(by inspection)	-	400	-
11.2(by inspection and by test)	-	400	-
11.2.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	400	-
11.2.5(As per annexure H, cl 11.2.5)	-	400	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	400	-
11.3.2(by inspection and by the tests of clauses 13)	-	400	-
11.3.3(by inspection)	-	400	-
11.3.4(by inspection)	-	400	-
11.3.5(by inspection)	-	400	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	400	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	400	-
11.3.8(by inspection)	-	400	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	400	-
11.4.1 (by inspection)	-	400	-
11.4.2(by inspection)	-	400	-
11.4.3(by the tests of clauses 15 to 17)	-	400	-
11.4.4 to 11.4.16(As per relevent type)	-	400	-
11.5(by inspection)	-	400	-
11.6.1(by inspection and by manual test)	-	400	-
11.6.2(by inspection and by manual test)	-	400	-
11.6.3.1(By inspection)	-	400	-
11.6.3.2(By inspection)	-	400	-
11.6.3.3(By inspection)	-	400	-
11.6.3.4(By inspection)	-	400	-
11.6.3.5(By inspection)	-	400	-
11.6.3.6(By inspection)	-	400	-
11.6.3.7(By inspection)	-	400	-
11.7.1(By Flexing test as per fig 9)	-	400	-
11.7.1.2.2(By Flexing test as per fig 9)	-	400	-
11.7.1.2.3(By Flexing test as per fig 9)	-	400	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	400	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	400	-
11.8(By inspection)	-	400	-
11.8.1(By inspection)	-	400	-
11.8.2(By inspection and as per table 11.8.2)	-	400	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	400	-
11.9.1(By inspection)	-	400	-
11.9.1.1(by inspection and manual test)	-	400	-
11.9.1.2(by inspection and manual test)	-	400	-
11.9.1.3(by inspection and manual test)	-	400	-
11.9.1.4(by inspection and manual test)	-	400	-
11.10.1(by inspection)	-	400	-
11.10.2(by inspection)	-	400	-
11.10.3(by inspection and by test of socket-outlet system)	-	400	-
11.11(Requirements during mounting, maintenance and servicing)	-	400	-
11.11.1(By inspection)	-	400	-
11.11.1.1(By inspection)	-	400	-
11.11.1.2(By inspection)	-	400	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	400	-
11.11.1.5.4(By inspection)	-	400	-
11.11.1.5.6(by pull test)	-	400	-
11.11.2(By inspection)	-	400	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.4(By inspection)	-	400	-
11.11.5(By inspection and by manual test)	-	400	-
11.11.6(By inspection)	-	400	-
11.11.7(By inspection)	-	400	-
11.12(As per H, cl 11.12)	-	400	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	400	-
11.1.102(As per IEC 60216-1:2001)	-	400	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	400	-
11.4.101(as per cl 11.4.101)	-	400	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	400	-
11.4.107(As per annexure DD)	-	400	-
11.6.3.101(As per table 7, item 117)	-	400	-
11.101(As per annexure BB)	-	400	-
12.1(As per IEC 60529)	-	400	-
12.1.6.2(Torque test)	-	400	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	400	-
12.3(as per cl 12.3.1 to 12.3.7)	-	400	-
12.101(None)	-	400	-
12.101.2(15 K+Tmax for 16 hr)	-	400	-
12.101.5(as per 12.103 to 12.105)	-	400	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	400	-
13.1(as per table 13.1)	-	400	-
13.2(As per table 13.2)	-	400	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	400	-
14.1(As per table 14.1)	-	400	-
14.3(As per table 14.1)	-	400	-
14.101.1( as per cl 14.102 and 14.102.1)	-	400	-
15(as per cl 15.1 to 15.4)	-	400	-
15.5(as per cl 15.5 to 15.6)	-	400	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	400	-
15.7(as per annexure J, cl 15.7)	-	400	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	400	-
15.5.3.109( voltage specified in Table 13.2)	-	400	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	400	-
16.2.4(test of cl 15 repeated )	-	400	-
16.2.4(42 of table 7.2)	-	400	-
18.1.6(By inspection)	-	400	-
18.1.6.1(By inspection)	-	400	-
18.1.6.2(By inspection)	-	400	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	400	-
18.2(Impact tester)	-	400	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	400	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	400	-
18.7(Pull test as per table 18.7)	-	400	-
18.8(as per cl 18.8.2 and 18.8.3)	-	400	-
18.9(axial pull of 15N/30N)	-	400	-
18.101(as per cl 18.101.2 and 101.3)	-	400	-
18.102(Hydrualic test)	-	400	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.2.1(By inspection)	-	400	-
19.2.2(By inspection)	-	400	-
19.2.3(By inspection)	-	400	-
19.2.4(By inspection)	-	400	-
19.2.4.1(By inspection)	-	400	-
19.2.5(By inspection)	-	400	-
19.2.5.1(By inspection)	-	400	-
19.2.6(By inspection)	-	400	-
20.1(as per table 20.2)	-	400	-
20.2.1(as per table 20.3)	-	400	-
20.2.2(as per table 20.4)	-	400	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	400	-
21.2.7(As per cl G.4)	-	400	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	400	-
25(as per annexure H)	-	400	-
27.1(as per annexure H)	-	400	-
27.2(as per cl 27.2.1 and 27.2.2)	-	400	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	400	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	400	-
10.1.7.1(by inspection)	-	400	-
11.7.2.11 to 11.7.2.15(By measurement)	-	400	-
5(By inspection)	-	400	-
5.1(By inspection)	-	400	-
5.2(By inspection)	-	400	-
6.1(By inspection)	-	400	-
6.2(By inspection)	-	400	-
6.3(By inspection)	-	400	-
6.4(By inspection)	-	400	-
6.5(By inspection)	-	400	-
6.5.1(IEC 60529 and by inspection)	-	400	-
6.5.2(IEC 60529 and by inspection)	-	400	-
6.5.3(Annexure N and by inspection)	-	400	-
6.6(By inspection)	-	400	-
6.7.1(By inspection)	-	400	-
6.7.2(By inspection)	-	400	-
6.8(By inspection)	-	400	-
6.8.2(By inspection)	-	400	-
6.9(Annexure H and by inspection)	-	400	-
6.1(By inspection)	-	400	-
6.11(By inspection)	-	400	-
6.12(By inspection)	-	400	-
6.13(By inspection)	-	400	-
6.14(By inspection)	-	400	-
6.15(Annexure J and by inspection)	-	400	-
6.16(By inspection)	-	400	-
6.18(Annexure H)	-	400	-
6.17(Annexure H)	-	400	-
6.4.3(By inspection)	-	400	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	400	-
H.17.14(as per cl H 17.4.16)	-	400	-
J 17.18.5(as per cl J 17.8.5)	-	400	-
J 17.18.5(as per cl J 17.8.6)	-	400	-
J 17.17.2(as per table 13.1)	-	400	-
J 17.17(As per table 13.2)	-	400	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	400	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	400	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	400	-
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	400	-
9(By inspection)	-	400	-
9.1.1(By inspection)	-	400	-
9.1.2(By inspection)	-	400	-
9.1.3(By inspection)	-	400	-
9.2(By inspection)	-	400	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	400	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.4(by inspection and by plating)	-	400	-
9.4.1(by inspection)	-	400	-
9.4.2(by inspection)	-	400	-
9.5.1(by inspection)	-	400	-
9.5.2(by inspection)	-	400	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.2(By inspection )	-	400	-
10.1.3(By inspection )	-	400	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	400	-
10.1.5(By measurement)	-	400	-
10.1.5.1(by inspection, by measurement, by torque test)	-	400	-
10.1.6(by inspection after cl 10.1.5)	-	400	-
10.1.7(by inspection)	-	400	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	400	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	400	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	400	-
10.1.11(By inspection)	-	400	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	400	-
10.1.13(By inspection and after the test of cl 17)	-	400	-
10.1.14(By inspection)	-	400	-
10.1.15(Figure 11 or 12)	-	400	-
10.2(By inspection)	-	400	-
10.2.1(Table 10.2.1)	-	400	-
10.2.2(By inspection)	-	400	-
10.2.3(By inspection)	-	400	-
10.2.4.1(Figure 14 or 15)	-	400	-
10.2.4.2(During the test of cl 14)	-	400	-
10.2.4.3(As per table 10.2.4.3)	-	400	-
10.2.4.4(As per Figure 16)	-	400	-
11.1(By inspection)	-	400	-
11.1.1(By inspection)	-	400	-
11.1.2(by inspection and by analysis of the material)	-	400	-
11.1.3(by inspection)	-	400	-
11.2(by inspection and by test)	-	400	-
11.2.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	400	-
11.2.5(As per annexure H, cl 11.2.5)	-	400	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	400	-
11.3.2(by inspection and by the tests of clauses 13)	-	400	-
11.3.3(by inspection)	-	400	-
11.3.4(by inspection)	-	400	-
11.3.5(by inspection)	-	400	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	400	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	400	-
11.3.8(by inspection)	-	400	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	400	-
11.4.1 (by inspection)	-	400	-
11.4.2(by inspection)	-	400	-
11.4.3(by the tests of clauses 15 to 17)	-	400	-
11.4.4 to 11.4.16(As per relevent type)	-	400	-
11.5(by inspection)	-	400	-
11.6.1(by inspection and by manual test)	-	400	-
11.6.2(by inspection and by manual test)	-	400	-
11.6.3.1(By inspection)	-	400	-
11.6.3.2(By inspection)	-	400	-
11.6.3.3(By inspection)	-	400	-
11.6.3.4(By inspection)	-	400	-
11.6.3.5(By inspection)	-	400	-
11.6.3.6(By inspection)	-	400	-
11.6.3.7(By inspection)	-	400	-
11.7.1(By Flexing test as per fig 9)	-	400	-
11.7.1.2.2(By Flexing test as per fig 9)	-	400	-
11.7.1.2.3(By Flexing test as per fig 9)	-	400	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	400	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	400	-
11.8(By inspection)	-	400	-
11.8.1(By inspection)	-	400	-
11.8.2(By inspection and as per table 11.8.2)	-	400	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	400	-
11.9.1(By inspection)	-	400	-
11.9.1.1(by inspection and manual test)	-	400	-
11.9.1.2(by inspection and manual test)	-	400	-
11.9.1.3(by inspection and manual test)	-	400	-
11.9.1.4(by inspection and manual test)	-	400	-
11.10.1(by inspection)	-	400	-
11.10.2(by inspection)	-	400	-
11.10.3(by inspection and by test of socket-outlet system)	-	400	-
11.11(Requirements during mounting, maintenance and servicing)	-	400	-
11.11.1(By inspection)	-	400	-
11.11.1.1(By inspection)	-	400	-
11.11.1.2(By inspection)	-	400	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	400	-
11.11.1.5.4(By inspection)	-	400	-
11.11.1.5.6(by pull test)	-	400	-
11.11.2(By inspection)	-	400	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.4(By inspection)	-	400	-
11.11.5(By inspection and by manual test)	-	400	-
11.11.6(By inspection)	-	400	-
11.11.7(By inspection)	-	400	-
11.12(As per H, cl 11.12)	-	400	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	400	-
11.1.102(As per IEC 60216-1:2001)	-	400	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	0	-
11.4.101(as per cl 11.4.101)	-	400	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	400	-
11.4.107(As per annexure DD)	-	400	-
11.6.3.101(As per table 7, item 117)	-	400	-
11.101(As per annexure BB)	-	400	-
12.1(As per IEC 60529)	-	400	-
12.1.6.2(Torque test)	-	400	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	400	-
12.3(as per cl 12.3.1 to 12.3.7)	-	400	-
12.101(None)	-	400	-
12.101.2(15 K+Tmax for 16 hr)	-	400	-
12.101.5(as per 12.103 to 12.105)	-	400	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	400	-
13.1(as per table 13.1)	-	400	-
13.2(As per table 13.2)	-	400	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	400	-
14.1(As per table 14.1)	-	400	-
14.3(As per table 14.1)	-	400	-
14.101.1( as per cl 14.102 and 14.102.1)	-	400	-
15(as per cl 15.1 to 15.4)	-	400	-
15.5(as per cl 15.5 to 15.6)	-	400	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	400	-
15.7(as per annexure J, cl 15.7)	-	400	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	400	-
15.5.3.109( voltage specified in Table 13.2)	-	400	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	400	-
16.2.4(test of cl 15 repeated )	-	400	-
16.2.4(42 of table 7.2)	-	400	-
18.1.6(By inspection)	-	400	-
18.1.6.1(By inspection)	-	400	-
18.1.6.2(By inspection)	-	400	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	400	-
18.2(Impact tester)	-	400	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	400	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	400	-
18.7(Pull test as per table 18.7)	-	400	-
18.8(as per cl 18.8.2 and 18.8.3)	-	400	-
18.9(axial pull of 15N/30N)	-	400	-
18.101(as per cl 18.101.2 and 101.3)	-	400	-
18.102(Hydrualic test)	-	400	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.2.1(By inspection)	-	400	-
19.2.2(By inspection)	-	400	-
19.2.3(By inspection)	-	400	-
19.2.4(By inspection)	-	400	-
19.2.4.1(By inspection)	-	400	-
19.2.5(By inspection)	-	400	-
19.2.5.1(By inspection)	-	400	-
19.2.6(By inspection)	-	400	-
20.1(as per table 20.2)	-	400	-
20.2.1(as per table 20.3)	-	400	-
20.2.2(as per table 20.4)	-	400	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	400	-
21.2.7(As per cl G.4)	-	400	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	400	-
25(as per annexure H)	-	400	-
27.1(as per annexure H)	-	400	-
27.2(as per cl 27.2.1 and 27.2.2)	-	400	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	400	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	400	-
10.1.7.1(by inspection)	-	400	-
11.7.2.11 to 11.7.2.15(By measurement)	-	400	-
5(By inspection)	-	400	-
5.1(By inspection)	-	400	-
5.2(By inspection)	-	400	-
6.1(By inspection)	-	400	-
6.2(By inspection)	-	400	-
6.3(By inspection)	-	400	-
6.4(By inspection)	-	400	-
6.5(By inspection)	-	400	-
6.5.1(IEC 60529 and by inspection)	-	400	-
6.5.2(IEC 60529 and by inspection)	-	400	-
6.5.3(Annexure N and by inspection)	-	400	-
6.6(By inspection)	-	400	-
6.7.1(By inspection)	-	400	-
6.7.2(By inspection)	-	400	-
6.8(By inspection)	-	400	-
6.8.2(By inspection)	-	400	-
6.9(Annexure H and by inspection)	-	400	-
6.1(By inspection)	-	400	-
6.11(By inspection)	-	400	-
6.12(By inspection)	-	400	-
6.13(By inspection)	-	400	-
6.14(By inspection)	-	400	-
6.15(Annexure J and by inspection)	-	400	-
6.16(By inspection)	-	400	-
6.18(Annexure H)	-	400	-
6.17(Annexure H)	-	400	-
6.4.3(By inspection)	-	400	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	400	-
H.17.14(as per cl H 17.4.16)	-	400	-
J 17.18.5(as per cl J 17.8.5)	-	400	-
J 17.18.5(as per cl J 17.8.6)	-	400	-
J 17.17.2(as per table 13.1)	-	400	-
J 17.17(As per table 13.2)	-	400	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	400	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	400	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	400	-
21.2.2 to 21.2.6(as per annexure G)	-	400	-
9(By inspection)	-	400	-
9.1.1(By inspection)	-	400	-
9.1.2(By inspection)	-	400	-
9.1.3(By inspection)	-	400	-
9.2(By inspection)	-	400	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	400	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.4(by inspection and by plating)	-	400	-
9.4.1(by inspection)	-	400	-
9.4.2(by inspection)	-	400	-
9.5.1(by inspection)	-	400	-
9.5.2(by inspection)	-	400	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.2(By inspection )	-	400	-
10.1.3(By inspection )	-	400	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	400	-
10.1.5(By measurement)	-	400	-
10.1.5.1(by inspection, by measurement, by torque test)	-	400	-
10.1.6(by inspection after cl 10.1.5)	-	400	-
10.1.7(by inspection)	-	400	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	400	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	400	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	400	-
10.1.11(By inspection)	-	400	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	400	-
10.1.13(By inspection and after the test of cl 17)	-	400	-
10.1.14(By inspection)	-	400	-
10.1.15(Figure 11 or 12)	-	400	-
10.2(By inspection)	-	400	-
10.2.1(Table 10.2.1)	-	400	-
10.2.2(By inspection)	-	400	-
10.2.3(By inspection)	-	400	-
10.2.4.1(Figure 14 or 15)	-	400	-
10.2.4.2(During the test of cl 14)	-	400	-
10.2.4.3(As per table 10.2.4.3)	-	400	-
10.2.4.4(As per Figure 16)	-	400	-
11.1(By inspection)	-	400	-
11.1.1(By inspection)	-	400	-
11.1.2(by inspection and by analysis of the material)	-	400	-
11.1.3(by inspection)	-	400	-
11.2(by inspection and by test)	-	400	-
11.2.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	400	-
11.2.5(As per annexure H, cl 11.2.5)	-	400	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	400	-
11.3.2(by inspection and by the tests of clauses 13)	-	400	-
11.3.3(by inspection)	-	400	-
11.3.4(by inspection)	-	400	-
11.3.5(by inspection)	-	400	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	400	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	400	-
11.3.8(by inspection)	-	400	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	400	-
11.4.1 (by inspection)	-	400	-
11.4.2(by inspection)	-	400	-
11.4.3(by the tests of clauses 15 to 17)	-	400	-
11.4.4 to 11.4.16(As per relevent type)	-	400	-
11.5(by inspection)	-	400	-
11.6.1(by inspection and by manual test)	-	400	-
11.6.2(by inspection and by manual test)	-	400	-
11.6.3.1(By inspection)	-	400	-
11.6.3.2(By inspection)	-	400	-
11.6.3.3(By inspection)	-	400	-
11.6.3.4(By inspection)	-	400	-
11.6.3.5(By inspection)	-	400	-
11.6.3.6(By inspection)	-	400	-
11.6.3.7(By inspection)	-	400	-
11.7.1(By Flexing test as per fig 9)	-	400	-
11.7.1.2.2(By Flexing test as per fig 9)	-	400	-
11.7.1.2.3(By Flexing test as per fig 9)	-	400	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	400	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	400	-
11.8(By inspection)	-	400	-
11.8.1(By inspection)	-	400	-
11.8.2(By inspection and as per table 11.8.2)	-	400	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	400	-
11.9.1(By inspection)	-	400	-
11.9.1.1(by inspection and manual test)	-	400	-
11.9.1.2(by inspection and manual test)	-	400	-
11.9.1.3(by inspection and manual test)	-	400	-
11.9.1.4(by inspection and manual test)	-	400	-
11.10.1(by inspection)	-	400	-
11.10.2(by inspection)	-	400	-
11.10.3(by inspection and by test of socket-outlet system)	-	400	-
11.11(Requirements during mounting, maintenance and servicing)	-	400	-
11.11.1(By inspection)	-	400	-
11.11.1.1(By inspection)	-	400	-
11.11.1.2(By inspection)	-	400	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	400	-
11.11.1.5.4(By inspection)	-	400	-
11.11.1.5.6(by pull test)	-	400	-
11.11.2(By inspection)	-	400	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.4(By inspection)	-	400	-
11.11.5(By inspection and by manual test)	-	400	-
11.11.6(By inspection)	-	400	-
11.11.7(By inspection)	-	400	-
11.12(As per H, cl 11.12)	-	400	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	400	-
11.1.102(As per IEC 60216-1:2001)	-	400	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	400	-
11.4.101(as per cl 11.4.101)	-	400	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	400	-
11.4.107(As per annexure DD)	-	400	-
11.6.3.101(As per table 7, item 117)	-	400	-
11.101(As per annexure BB)	-	400	-
12.1(As per IEC 60529)	-	400	-
12.1.6.2(Torque test)	-	400	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	400	-
12.3(as per cl 12.3.1 to 12.3.7)	-	400	-
12.101(None)	-	400	-
12.101.2(15 K+Tmax for 16 hr)	-	400	-
12.101.5(as per 12.103 to 12.105)	-	400	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	400	-
13.1(as per table 13.1)	-	400	-
13.2(As per table 13.2)	-	400	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	400	-
14.1(As per table 14.1)	-	400	-
14.3(As per table 14.1)	-	400	-
14.101.1( as per cl 14.102 and 14.102.1)	-	400	-
15(as per cl 15.1 to 15.4)	-	400	-
15.5(as per cl 15.5 to 15.6)	-	400	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	400	-
15.7(as per annexure J, cl 15.7)	-	400	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	400	-
15.5.3.109( voltage specified in Table 13.2)	-	400	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	400	-
16.2.4(test of cl 15 repeated )	-	400	-
16.2.4(42 of table 7.2)	-	400	-
18.1.6(By inspection)	-	400	-
18.1.6.1(By inspection)	-	400	-
18.1.6.2(By inspection)	-	400	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	400	-
18.2(Impact tester)	-	400	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	400	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	400	-
18.7(Pull test as per table 18.7)	-	400	-
18.8(as per cl 18.8.2 and 18.8.3)	-	400	-
18.9(axial pull of 15N/30N)	-	400	-
18.101(as per cl 18.101.2 and 101.3)	-	400	-
18.102(Hydrualic test)	-	400	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.2.1(By inspection)	-	400	-
19.2.2(By inspection)	-	400	-
19.2.3(By inspection)	-	400	-
19.2.4(By inspection)	-	400	-
19.2.4.1(By inspection)	-	400	-
19.2.5(By inspection)	-	400	-
19.2.5.1(By inspection)	-	400	-
19.2.6(By inspection)	-	400	-
20.1(as per table 20.2)	-	400	-
20.2.1(as per table 20.3)	-	400	-
20.2.2(as per table 20.4)	-	400	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	400	-
21.2.7(As per cl G.4)	-	400	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	400	-
25(as per annexure H)	-	400	-
27.1(as per annexure H)	-	400	-
27.2(as per cl 27.2.1 and 27.2.2)	-	400	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	400	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	400	-
10.1.7.1(by inspection)	-	400	-
11.7.2.11 to 11.7.2.15(By measurement)	-	400	-
5(By inspection)	-	400	-
5.1(By inspection)	-	400	-
5.2(By inspection)	-	400	-
6.1(By inspection)	-	400	-
6.2(By inspection)	-	400	-
6.3(By inspection)	-	400	-
6.4(By inspection)	-	400	-
6.5(By inspection)	-	400	-
6.5.1(IEC 60529 and by inspection)	-	400	-
6.5.2(IEC 60529 and by inspection)	-	400	-
6.5.3(Annexure N and by inspection)	-	400	-
6.6(By inspection)	-	400	-
6.7.1(By inspection)	-	400	-
6.7.2(By inspection)	-	400	-
6.8(By inspection)	-	400	-
6.8.2(By inspection)	-	400	-
6.9(Annexure H and by inspection)	-	400	-
6.1(By inspection)	-	400	-
6.11(By inspection)	-	400	-
6.12(By inspection)	-	400	-
6.13(By inspection)	-	400	-
6.14(By inspection)	-	400	-
6.15(Annexure J and by inspection)	-	400	-
6.16(By inspection)	-	400	-
6.18(Annexure H)	-	400	-
6.17(Annexure H)	-	400	-
6.4.3(By inspection)	-	400	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	400	-
H.17.14(as per cl H 17.4.16)	-	400	-
J 17.18.5(as per cl J 17.8.5)	-	400	-
J 17.18.5(as per cl J 17.8.6)	-	400	-
J 17.17.2(as per table 13.1)	-	400	-
J 17.17(As per table 13.2)	-	400	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	400	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	400	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	400	-
21.2.2 to 21.2.6(as per annexure G)	-	400	-
9(By inspection)	-	400	-
9.1.1(By inspection)	-	400	-
9.1.2(By inspection)	-	400	-
9.1.3(By inspection)	-	400	-
9.2(By inspection)	-	400	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	400	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.4(by inspection and by plating)	-	400	-
9.4.1(by inspection)	-	400	-
9.4.2(by inspection)	-	400	-
9.5.1(by inspection)	-	400	-
9.5.2(by inspection)	-	400	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.2(By inspection )	-	400	-
10.1.3(By inspection )	-	400	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	400	-
10.1.5(By measurement)	-	400	-
10.1.5.1(by inspection, by measurement, by torque test)	-	400	-
10.1.6(by inspection after cl 10.1.5)	-	400	-
10.1.7(by inspection)	-	400	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	400	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	400	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	400	-
10.1.11(By inspection)	-	400	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	400	-
10.1.13(By inspection and after the test of cl 17)	-	400	-
10.1.14(By inspection)	-	400	-
10.1.15(Figure 11 or 12)	-	400	-
10.2(By inspection)	-	400	-
10.2.1(Table 10.2.1)	-	400	-
10.2.2(By inspection)	-	400	-
10.2.3(By inspection)	-	400	-
10.2.4.1(Figure 14 or 15)	-	400	-
10.2.4.2(During the test of cl 14)	-	400	-
10.2.4.3(As per table 10.2.4.3)	-	400	-
10.2.4.4(As per Figure 16)	-	400	-
11.1(By inspection)	-	400	-
11.1.1(By inspection)	-	400	-
11.1.2(by inspection and by analysis of the material)	-	400	-
11.1.3(by inspection)	-	400	-
11.2(by inspection and by test)	-	400	-
11.2.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	400	-
11.2.5(As per annexure H, cl 11.2.5)	-	400	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	400	-
11.3.2(by inspection and by the tests of clauses 13)	-	400	-
11.3.3(by inspection)	-	400	-
11.3.4(by inspection)	-	400	-
11.3.5(by inspection)	-	400	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	400	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	400	-
11.3.8(by inspection)	-	400	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	400	-
11.4.1 (by inspection)	-	400	-
11.4.2(by inspection)	-	400	-
11.4.3(by the tests of clauses 15 to 17)	-	400	-
11.4.4 to 11.4.16(As per relevent type)	-	400	-
11.5(by inspection)	-	400	-
11.6.1(by inspection and by manual test)	-	400	-
11.6.2(by inspection and by manual test)	-	400	-
11.6.3.1(By inspection)	-	400	-
11.6.3.2(By inspection)	-	400	-
11.6.3.3(By inspection)	-	400	-
11.6.3.4(By inspection)	-	400	-
11.6.3.5(By inspection)	-	400	-
11.6.3.6(By inspection)	-	400	-
11.6.3.7(By inspection)	-	400	-
11.7.1(By Flexing test as per fig 9)	-	400	-
11.7.1.2.2(By Flexing test as per fig 9)	-	400	-
11.7.1.2.3(By Flexing test as per fig 9)	-	400	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	400	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	400	-
11.8(By inspection)	-	400	-
11.8.1(By inspection)	-	400	-
11.8.2(By inspection and as per table 11.8.2)	-	400	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	400	-
11.9.1(By inspection)	-	400	-
11.9.1.1(by inspection and manual test)	-	400	-
11.9.1.2(by inspection and manual test)	-	400	-
11.9.1.3(by inspection and manual test)	-	400	-
11.9.1.4(by inspection and manual test)	-	400	-
11.10.1(by inspection)	-	400	-
11.10.2(by inspection)	-	400	-
11.10.3(by inspection and by test of socket-outlet system)	-	400	-
11.11(Requirements during mounting, maintenance and servicing)	-	400	-
11.11.1(By inspection)	-	400	-
11.11.1.1(By inspection)	-	400	-
11.11.1.2(By inspection)	-	400	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	400	-
11.11.1.5.4(By inspection)	-	400	-
11.11.1.5.6(by pull test)	-	400	-
11.11.2(By inspection)	-	400	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.4(By inspection)	-	400	-
11.11.5(By inspection and by manual test)	-	400	-
11.11.6(By inspection)	-	400	-
11.11.7(By inspection)	-	400	-
11.12(As per H, cl 11.12)	-	400	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	400	-
11.1.102(As per IEC 60216-1:2001)	-	400	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	400	-
11.4.101(as per cl 11.4.101)	-	400	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	400	-
11.4.107(As per annexure DD)	-	400	-
11.6.3.101(As per table 7, item 117)	-	400	-
11.101(As per annexure BB)	-	400	-
12.1(As per IEC 60529)	-	400	-
12.1.6.2(Torque test)	-	400	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	400	-
12.3(as per cl 12.3.1 to 12.3.7)	-	400	-
12.101(None)	-	400	-
12.101.2(15 K+Tmax for 16 hr)	-	400	-
12.101.5(as per 12.103 to 12.105)	-	400	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	400	-
13.1(as per table 13.1)	-	400	-
13.2(As per table 13.2)	-	400	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	400	-
14.1(As per table 14.1)	-	400	-
14.3(As per table 14.1)	-	400	-
14.101.1( as per cl 14.102 and 14.102.1)	-	400	-
15(as per cl 15.1 to 15.4)	-	400	-
15.5(as per cl 15.5 to 15.6)	-	400	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	400	-
15.7(as per annexure J, cl 15.7)	-	400	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	400	-
15.5.3.109( voltage specified in Table 13.2)	-	400	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	400	-
16.2.4(test of cl 15 repeated )	-	400	-
16.2.4(42 of table 7.2)	-	400	-
18.1.6(By inspection)	-	400	-
18.1.6.1(By inspection)	-	400	-
18.1.6.2(By inspection)	-	400	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	400	-
18.2(Impact tester)	-	400	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	400	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	400	-
18.7(Pull test as per table 18.7)	-	400	-
18.8(as per cl 18.8.2 and 18.8.3)	-	400	-
18.9(axial pull of 15N/30N)	-	400	-
18.101(as per cl 18.101.2 and 101.3)	-	400	-
18.102(Hydrualic test)	-	400	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.2.1(By inspection)	-	400	-
19.2.2(By inspection)	-	400	-
19.2.3(By inspection)	-	400	-
19.2.4(By inspection)	-	400	-
19.2.4.1(By inspection)	-	400	-
19.2.5(By inspection)	-	400	-
19.2.5.1(By inspection)	-	400	-
19.2.6(By inspection)	-	400	-
20.1(as per table 20.2)	-	400	-
20.2.1(as per table 20.3)	-	400	-
20.2.2(as per table 20.4)	-	400	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	400	-
21.2.7(As per cl G.4)	-	400	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	400	-
25(as per annexure H)	-	400	-
27.1(as per annexure H)	-	400	-
27.2(as per cl 27.2.1 and 27.2.2)	-	400	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	400	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	400	-
10.1.7.1(by inspection)	-	400	-
11.7.2.11 to 11.7.2.15(By measurement)	-	400	-
5(By inspection)	-	400	-
5.1(By inspection)	-	400	-
5.2(By inspection)	-	400	-
6.1(By inspection)	-	400	-
6.2(By inspection)	-	400	-
6.3(By inspection)	-	400	-
6.4(By inspection)	-	400	-
6.5(By inspection)	-	400	-
6.5.1(IEC 60529 and by inspection)	-	400	-
6.5.2(IEC 60529 and by inspection)	-	400	-
6.5.3(Annexure N and by inspection)	-	400	-
6.6(By inspection)	-	400	-
6.7.1(By inspection)	-	400	-
6.7.2(By inspection)	-	400	-
6.8(By inspection)	-	400	-
6.8.2(By inspection)	-	400	-
6.9(Annexure H and by inspection)	-	400	-
6.1(By inspection)	-	400	-
6.11(By inspection)	-	400	-
6.12(By inspection)	-	400	-
6.13(By inspection)	-	400	-
6.14(By inspection)	-	400	-
6.15(Annexure J and by inspection)	-	400	-
6.16(By inspection)	-	400	-
6.18(Annexure H)	-	400	-
6.17(Annexure H)	-	400	-
6.4.3(By inspection)	-	400	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	400	-
H.17.14(as per cl H 17.4.16)	-	400	-
J 17.18.5(as per cl J 17.8.5)	-	400	-
J 17.18.5(as per cl J 17.8.6)	-	400	-
J 17.17.2(as per table 13.1)	-	400	-
J 17.17(As per table 13.2)	-	400	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	400	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	400	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	400	-
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	400	-
17.1(by the tests of 17.1.3 as indicated in 17.16)	-	400	-
17.6(as per cl 17.6.1 and 17.6.2)	-	400	-
17.7(as per cl 17.7.1 to 17.7.7)	-	400	-
17.8(as per cl 17.8.1 to 17.8.4.1)	-	400	-
17.9(as per cl 17.9.1 to 17.9.4)	-	400	-
17.1(as per cl 17.10.1 to 17.10.4)	-	400	-
17.11(as per cl 17.11.1 to 17.11.4)	-	400	-
17.12(as per cl 17.12.1 to 17.12.5)	-	400	-
17.13(as per cl 17.13.1 to 17.13.4)	-	400	-
17.15.2(as per cl 17.15.2 and 17.15.2.3)	-	400	-
17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C)	-	400	-
17.16.107( 250 thermal cycles.)	-	400	-
17.16.108( 7 h at a temperature of –20 C (or lower, if declared))	-	400	-
17.101.1(as per cl 17.101.1 to 17.105)	-	400	-
21.2.2 to 21.2.6(as per annexure G)	-	-	-
9(By inspection)	-	-	-
9.1.1(By inspection)	-	-	-
9.1.2(By inspection)	-	-	-
9.1.3(By inspection)	-	-	-
9.2(By inspection)	-	-	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	-	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	-	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	-	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	-	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	-	-
9.4(by inspection and by plating)	-	-	-
9.4.1(by inspection)	-	-	-
9.4.2(by inspection)	-	-	-
9.5.1(by inspection)	-	-	-
9.5.2(by inspection)	-	-	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	-	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	-	-
10.1.2(By inspection )	-	-	-
10.1.3(By inspection )	-	-	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	-	-
10.1.5(By measurement)	-	-	-
10.1.5.1(by inspection, by measurement, by torque test)	-	-	-
10.1.6(by inspection after cl 10.1.5)	-	-	-
10.1.7(by inspection)	-	-	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	-	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	-	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	-	-
10.1.11(By inspection)	-	-	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	-	-
10.1.13(By inspection and after the test of cl 17)	-	-	-
10.1.14(By inspection)	-	-	-
10.1.15(Figure 11 or 12)	-	-	-
10.2(By inspection)	-	-	-
10.2.1(Table 10.2.1)	-	-	-
10.2.2(By inspection)	-	-	-
10.2.3(By inspection)	-	-	-
10.2.4.1(Figure 14 or 15)	-	-	-
10.2.4.2(During the test of cl 14)	-	-	-
10.2.4.3(As per table 10.2.4.3)	-	-	-
10.2.4.4(As per Figure 16)	-	-	-
11.1(By inspection)	-	-	-
11.1.1(By inspection)	-	-	-
11.1.2(by inspection and by analysis of the material)	-	-	-
11.1.3(by inspection)	-	-	-
11.2(by inspection and by test)	-	-	-
11.2.2(by inspection, by measurement and/or by manual test)	-	-	-
11.2.3(by inspection, by measurement and/or by manual test)	-	-	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	-	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	-	-
11.2.5(As per annexure H, cl 11.2.5)	-	-	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	-	-
11.3.2(by inspection and by the tests of clauses 13)	-	-	-
11.3.3(by inspection)	-	-	-
11.3.4(by inspection)	-	-	-
11.3.5(by inspection)	-	-	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	-	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	-	-
11.3.8(by inspection)	-	-	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	-	-
11.4.1 (by inspection)	-	-	-
11.4.2(by inspection)	-	-	-
11.4.3(by the tests of clauses 15 to 17)	-	-	-
11.4.4 to 11.4.16(As per relevent type)	-	-	-
11.5(by inspection)	-	-	-
11.6.1(by inspection and by manual test)	-	-	-
11.6.2(by inspection and by manual test)	-	-	-
11.6.3.1(By inspection)	-	-	-
11.6.3.2(By inspection)	-	-	-
11.6.3.3(By inspection)	-	-	-
11.6.3.4(By inspection)	-	-	-
11.6.3.5(By inspection)	-	-	-
11.6.3.6(By inspection)	-	-	-
11.6.3.7(By inspection)	-	-	-
11.7.1(By Flexing test as per fig 9)	-	-	-
11.7.1.2.2(By Flexing test as per fig 9)	-	-	-
11.7.1.2.3(By Flexing test as per fig 9)	-	-	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	-	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	-	-
11.8(By inspection)	-	-	-
11.8.1(By inspection)	-	-	-
11.8.2(By inspection and as per table 11.8.2)	-	-	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	-	-
11.9.1(By inspection)	-	-	-
11.9.1.1(by inspection and manual test)	-	-	-
11.9.1.2(by inspection and manual test)	-	-	-
11.9.1.3(by inspection and manual test)	-	-	-
11.9.1.4(by inspection and manual test)	-	-	-
11.10.1(by inspection)	-	-	-
11.10.2(by inspection)	-	-	-
11.10.3(by inspection and by test of socket-outlet system)	-	-	-
11.11(Requirements during mounting, maintenance and servicing)	-	-	-
11.11.1(By inspection)	-	-	-
11.11.1.1(By inspection)	-	-	-
11.11.1.2(By inspection)	-	-	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	-	-
11.11.1.5.4(By inspection)	-	-	-
11.11.1.5.6(by pull test)	-	-	-
11.11.2(By inspection)	-	-	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	-	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	-	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	-	-
11.11.4(By inspection)	-	-	-
11.11.5(By inspection and by manual test)	-	-	-
11.11.6(By inspection)	-	-	-
11.11.7(By inspection)	-	-	-
11.12(As per H, cl 11.12)	-	-	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	-	-
11.1.102(As per IEC 60216-1:2001)	-	-	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	-	-
11.4.101(as per cl 11.4.101)	-	-	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	-	-
11.4.107(As per annexure DD)	-	-	-
11.6.3.101(As per table 7, item 117)	-	-	-
11.101(As per annexure BB)	-	-	-
12.1(As per IEC 60529)	-	-	-
12.1.6.2(Torque test)	-	-	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	-	-
12.3(as per cl 12.3.1 to 12.3.7)	-	-	-
12.101(None)	-	-	-
12.101.2(15 K+Tmax for 16 hr)	-	-	-
12.101.5(as per 12.103 to 12.105)	-	-	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	-	-
13.1(as per table 13.1)	-	-	-
13.2(As per table 13.2)	-	-	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	-	-
14.1(As per table 14.1)	-	-	-
14.3(As per table 14.1)	-	-	-
14.101.1( as per cl 14.102 and 14.102.1)	-	-	-
15(as per cl 15.1 to 15.4)	-	-	-
15.5(as per cl 15.5 to 15.6)	-	-	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	-	-
15.7(as per annexure J, cl 15.7)	-	-	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	-	-
15.5.3.109( voltage specified in Table 13.2)	-	-	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	-	-
16.2.4(test of cl 15 repeated )	-	-	-
16.2.4(42 of table 7.2)	-	-	-
18.1.6(By inspection)	-	-	-
18.1.6.1(By inspection)	-	-	-
18.1.6.2(By inspection)	-	-	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	-	-
18.2(Impact tester)	-	-	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	-	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	-	-
18.7(Pull test as per table 18.7)	-	-	-
18.8(as per cl 18.8.2 and 18.8.3)	-	-	-
18.9(axial pull of 15N/30N)	-	-	-
18.101(as per cl 18.101.2 and 101.3)	-	-	-
18.102(Hydrualic test)	-	-	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.2.1(By inspection)	-	-	-
19.2.2(By inspection)	-	-	-
19.2.3(By inspection)	-	-	-
19.2.4(By inspection)	-	-	-
19.2.4.1(By inspection)	-	-	-
19.2.5(By inspection)	-	-	-
19.2.5.1(By inspection)	-	-	-
19.2.6(By inspection)	-	-	-
20.1(as per table 20.2)	-	-	-
20.2.1(as per table 20.3)	-	-	-
20.2.2(as per table 20.4)	-	-	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	-	-
21.2.7(As per cl G.4)	-	-	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	-	-
25(as per annexure H)	-	-	-
27.1(as per annexure H)	-	-	-
27.2(as per cl 27.2.1 and 27.2.2)	-	-	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	-	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	-	-
10.1.7.1(by inspection)	-	-	-
11.7.2.11 to 11.7.2.15(By measurement)	-	-	-
5(By inspection)	-	-	-
5.1(By inspection)	-	-	-
5.2(By inspection)	-	-	-
6.1(By inspection)	-	-	-
6.2(By inspection)	-	-	-
6.3(By inspection)	-	-	-
6.4(By inspection)	-	-	-
6.5(By inspection)	-	-	-
6.5.1(IEC 60529 and by inspection)	-	-	-
6.5.2(IEC 60529 and by inspection)	-	-	-
6.5.3(Annexure N and by inspection)	-	-	-
6.6(By inspection)	-	-	-
6.7.1(By inspection)	-	-	-
6.7.2(By inspection)	-	-	-
6.8(By inspection)	-	-	-
6.8.2(By inspection)	-	-	-
6.9(Annexure H and by inspection)	-	-	-
6.1(By inspection)	-	-	-
6.11(By inspection)	-	-	-
6.12(By inspection)	-	-	-
6.13(By inspection)	-	-	-
6.14(By inspection)	-	-	-
6.15(Annexure J and by inspection)	-	-	-
6.16(By inspection)	-	-	-
6.18(Annexure H)	-	-	-
6.17(Annexure H)	-	-	-
6.4.3(By inspection)	-	-	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	-	-
H.17.14(as per cl H 17.4.16)	-	-	-
J 17.18.5(as per cl J 17.8.5)	-	-	-
J 17.18.5(as per cl J 17.8.6)	-	-	-
J 17.17.2(as per table 13.1)	-	-	-
J 17.17(As per table 13.2)	-	-	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	-	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	-	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	-	-
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	-	-
17.1(by the tests of 17.1.3 as indicated in 17.16)	-	-	-
17.6(as per cl 17.6.1 and 17.6.2)	-	-	-
17.7(as per cl 17.7.1 to 17.7.7)	-	-	-
17.8(as per cl 17.8.1 to 17.8.4.1)	-	-	-
17.9(as per cl 17.9.1 to 17.9.4)	-	-	-
17.1(as per cl 17.10.1 to 17.10.4)	-	-	-
17.11(as per cl 17.11.1 to 17.11.4)	-	-	-
17.12(as per cl 17.12.1 to 17.12.5)	-	-	-
17.13(as per cl 17.13.1 to 17.13.4)	-	-	-
17.15.2(as per cl 17.15.2 and 17.15.2.3)	-	-	-
17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C)	-	-	-
17.16.107( 250 thermal cycles.)	-	-	-
17.16.108( 7 h at a temperature of –20 C (or lower, if declared))	-	-	-
17.101.1(as per cl 17.101.1 to 17.105)	-	-	-

14 Nov, 2027

-
-

12626

BIS, Central Laboratory (CL)

None

IS 1051 (1980)

Specification for pyrethrum extracts

Rs 5750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.2.2 (Colour and Odour)	-
Cl.2.3 (Flash point)	-
Cl.2.5 (Saponification value)	-
Cl.2.1.2 (Identity)	-
Cl.2.4 (Total Pyrethrin Content)	-
Cl.2.1.1 (Description)	-

-
-

12627

BIS, Southern Regional Laboratory (SRL)

None

IS 16232 (2014)

Iron fortified iodized salt (Double Fortified Salt) - Food grade - Specification

11800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description - Iron fortified iodized salt (Double fortified salt) shall be crushed crystalline solid; white or pale pink or light grey in colour, free from contamination with clay and other extraneous adulterants and impurities)	-
3.3 (material shall pass through 4.00 mm IS sieve)	-
3.4 - Table 1 - i (Moisture - Annex A of IS 7224)	-
3.4 - Table 1 - ii (Water insoluble matter, on dry basis - A-4 of IS 253 )	-
3.4 - Table 1 - iii (Chloride content (as NaCl), on dry basis - A-4 of IS 253)	-
3.4 - Table 1 - iv (Matter insoluble in dilute HCl, on dry basis - Annex G)	-
3.4 - Table 1 - v (Matter soluble in water other than sodium chloride, on dry basis - A-6 of IS 253)	-
3.4 - Table 1 - vi (Iron content (as Fe) - Annex A)	-
3.4 - Table 1 - vii- a (Iodine content, Manufacturer’s level - Annex B)	-
3.4 - Table 1 - vii- b (Iodine content, Distribution channel including retail level - Annex B)	-
3.4 - Table 1 - viii - b (pH of 5 percent aqueous solution : For other forms of iron fortification - Annex C)	-
3.4 - Table 1 - ix (Sulphate (as SO4) - A-8 of IS 253)	-
3.4 - Table 1 - x (Magnesium (as Mg), water soluble - A-7 of IS 253)	-
3.4 - Table 1 - xi - b (Phosphorous (as P2O5) - For other forms of iron fortification - Annex D)	-
3.4 - Table 1 - xii (Sodium hexa meta phosphate, on dry basis - Annex E)	-
3.4 - Table 1 - xi - a (Phosphorous (as P2O5) - For iron fortification through encapsulated ferrous fumarate - Annex D)	-

-
" 500 g " Excluding Except SHMP and Phosphorous Content Tets"

12628

Aforeserve Labs Private Limited, Gurugram

9140626

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

upto 5kVA

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6(Power interface)	-	1000	-
4.7(Marking & instructions)	-	500	-
5.1(Protection against shock and energy hazards)	-	500	-
5.2(Requirement of auxiliary circuits)	-	900	-
5.3(Protective earthing and bonding)	-	900	-
5.4(AC and DC power isolation)	-	900	-
5.5(Over current and earth fault condition)	-	900	-
5.6(Safety interlocks)	-	900	-
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	900	-
6.1(Wiring, connections and supply)	-	900	-
6.2(Connection to power)	-	900	-
6.3(Wiring terminals for external power conductors)	-	900	-
7.1(Enclosure)	-	900	-
7.2(STABILITY)	-	900	-
7.3(MECHANICAL STRENGTH)	-	900	-
7.4(Construction details)	-	900	-
7.5(Resistance to fire)	-	900	-
7.6(Battery location)	-	900	-
7.7(Temperature rise)	-	900	-
8.1(General procision for earth leakage)	-	900	-
8.2(Electric Strength)	-	900	-
8.3(Abnormal operating and fault conditions)	-	900	-
9.0(Connection to telecommunication networks)	-	900	-
4.5/RD 1.5(Components)	-	900	-
2.10.5.11(SMPS/Main transformer)	-	900	-
2.10.6(PCB Material)	-	900	-
3.2.5(Non-rewirable plug with PVC sheathed cable)	-	900	-
3.2.4(Appliances inlets/connectors)	-	900	-
2.10.5.4(Semiconductor devices)	-	900	-
2.10.5.13(Winding wires)	-	900	-
4.3.8(Batteries)	-	900	-
2.10.5.6(Thin sheet material)	-	900	-
5.6.1/ RD 2.8.7(Switches & Relays)	-	900	-
6.1.1/ RD 3.1.4(Insulating Conductors)	-	900	-

06 Jun, 2027

-
Switches & Relays (Cl.2.8.2,2.8.5,2.8.7), Winding wires (Cl.2.10.5.3), Semi-conductor Devices (Cl.2.10.5.4), SMPS/Mains transformer (Cl. 2.10.5.11), PCB material (Cl.2.10.6), Wire in wound component (Cl.2.10.5.12), Wire with solvent based enamel in wound component (Cl.2.10.5.13), Additional insulation in wound component (Cl.2.10.5.14), Test for pollution degree 1 environment and insulating compound (Cl.2.10.10), Test for semiconductor devices and for cemented joints (Cl.2.10.11), enclosed and sealed parts (Cl.2.10.12), Internal wire (Cl.3.1.4), Batteries (Cl.4.3.8), Protection of personnel safety interlock (Cl.5.6), Ac power cords (Cl.6.2.1/RD-cl.3.2.6.1), Non rewirable plug with PVC sheathed cable (Cl.3.2.5)

12629

Matrix Test Labs

8138626

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.6(Marking)	-	2000	10% discount to BIS
20.7(Construction)	-	5000	10% discount to BIS
20.8(Creepage Distance and Clearances)	-	5000	10% discount to BIS
20.9(Provision for earthing)	-	5000	10% discount to BIS
20.10(Terminals)	-	2000	10% discount to BIS
20.11(External & Internal Wiring)	-	5000	10% discount to BIS
20.12(Protection against electric shock)	-	5000	10% discount to BIS
20.13(Endurance Tests and Thermal Tests)	-	15000	10% discount to BIS
20.14(Resistance to Dust & Moisture)	-	10000	10% discount to BIS
20.15(Insulation Resistance and Electric Strength)	-	10000	10% discount to BIS
20.16(Resistance to Heat , fire and tracking)	-	5000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f. 16.11.2022. Electromechanical Contact System (Cl.4.11.6), Photo Biological hazards (Cl.4.24), as per (RD) IS 10322(P1):2014

12630

Matrix Test Labs

8138626

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	2000	10% discount to BIS
8.0(Creepage Distance and Clearances)	-	5000	10% discount to BIS
9.0(Provision for earthing)	-	5000	10% discount to BIS
10.0(Terminals)	-	2000	10% discount to BIS
11.0(External & Internal Wiring)	-	5000	10% discount to BIS
12.0(Protection against electric shock)	-	5000	10% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	15000	10% discount to BIS
14.0(Resistance to Dust & Moisture)	-	10000	10% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	10000	10% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	5000	10% discount to BIS
7.0(Construction)	-	5000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f. 16.11.2022. Electromechanical Contact System (Cl.4.11.6), UV Radiation (Cl. 4.24, Annex-P), as per (RD) IS 10322(P-1):2014

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number