BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15363 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

12631

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

Specification for Thermosetting Insulated Fire Survival

145000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	500	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	250	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	450	-
IS 191:2007 & IS 440(Copper purity test)	-	3000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	350	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	350	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	750	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	750	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	3000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	1200	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3500	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	4500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	1500	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	3500	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	350	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	1500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	250	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	55000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1250	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	750	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	3000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	7500	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	7500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	0	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	450	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1200	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	750	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	2000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1250	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	5500	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	35000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	45000	Resistance to fire alone (Symbol F) - Rs.15,000/-, • Resistance to fire and water (Symbol W) - Rs.15000/-, • Resistance to fire and mechanical shock (Symbol S) - Rs.15000/-, • Resistance to fire with direct mechanical impact and water jet
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
IS 191:2007 & IS 440(Copper purity test)	-	0	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	0	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	0	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	0	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	0	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	0	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	0	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	0	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
IS 191:2007 & IS 440(Copper purity test)	-	0	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	0	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	0	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	0	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	0	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	0	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	0	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	0	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	0	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	0	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
IS 191:2007 & IS 440(Copper purity test)	-	0	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	0	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	0	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	0	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	0	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	0	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	0	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	0	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	0	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	0	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	0	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	2000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	10000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	5000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	1500	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
IS 191:2007 & IS 440(Copper purity test)	-	0	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	0	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	0	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	0	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	0	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	0	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	0	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	0	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	0	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	0	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	0	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	0	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	0	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	0	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	0	-

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

12632

National Forensic Sciences University (NFSU), Gandhinagar

7170534

IS 17051 (2018)

Textiles - Bullet resistant jackets - Performance requirements

800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.6(X-Ray of HAP)	-	0	Yet to decide the testing charges
6.1(Threat levels)	-	16500	Rs. 16500 + 18% GST for single HAP/SAP (06 Shots)
6.2(Behind Armour Blunt Trauma (BFS limit))	-	16500	Rs. 16500 + 18% GST for single HAP/SAP (06 Shots) Rs. 7500 + 18 % GST for Groin/Side Plate/Throat
6.5(Ballistic Limit (optional))	-	2500	Rs. 2500+ 18% GST for single shot
6.6(Shelf Life of SAP and HAP ballistic panels)	-	16500	Rs 16500 + 18% GST for SAP Tumbling Rs 10000 + 18% GST for HAP Conditioning Rs 7500 + 18% GST for Side Plate conditioning Rs 10000 + 18% GST for Groin Tumbling
8.1(Extreme Temperatures (optional))	-	10000	Rs 10000 + 18% GST per complete jacket
8.2(Fluid Exposure (optional))	-	0	-
8.3(In Transit Conditions (for HAP))	-	0	-
8.2.1(Water resistance)	-	0	-

-
Excluding 8.2(Fluid Exposure (optional)) 8.3(In Transit Conditions (for HAP)) 8.2.1(Water resistance)

12633

MATERIAL TESTING LABORATORY LLP

8176306

IS 4759 (1996)

Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)

All grades

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table 1, 9.2, 9.2.1 ,9.2.2(Msaa of Zinc Coating - IS 4759 IS 6745 IS 3203 IS 6012 )	-	1500	-
9.3(Uniformity of Zinc Coating - IS 4759 IS 2633 )	-	500	-
9.4(Adhesion of Galvanizing coating - IS 2629 )	-	500	-
6.2 & 6.4(Freedom from Defects - IS 4759)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Zinc -IS 2600)	-	500	Raw Material Zinc testing Charge-4000/-
4.1 & Table-1 of IS 209/IS 13229(Lead -IS 2600)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Cadmium -IS 2600)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Iron -IS 2600)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Tin -IS 2600)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Copper -IS 2600)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Thallium -IS 2600)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Indium -IS 2600)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Total Impurities -IS 2600)	-	0	-
10(Marking)	-	250	-
6.3(Steel Embrittlement -IS:6158-1984)	-	750	-

-
-

12634

MATERIAL TESTING LABORATORY LLP

8176306

IS 1264 (1997)

Brass gravity die castings - Specification (Fourth Revision)

All grades

2150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	100	-
6.0(Shape)	-	100	-
7.0(Cu)	-	200	-
7.0(Sn)	-	200	-
7.0(Pb)	-	200	-
7.0(Ni)	-	200	-
7.0(Fe)	-	200	-
7.0(Al)	-	200	-
7.0(Mn)	-	200	-
7.0(Si)	-	200	-
7.0(Total impurities excluding Ni Pb Al Zn)	-	200	-
9.0(Pressure test)	-	250	-
11(Marking)	-	100	-
6.0(Size)	-	100	-
6.0(Mass)	-	100	-

-
-

12635

MATERIAL TESTING LABORATORY LLP

8176306

IS 407 (1981)

Specification for brass tubes for general purposes (Third Revision)

All Grades

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6/6.1(FREEDOM FROM DEFECTS)	-	250	-
7/7.1 & 7.1.1(CONDITION)	-	250	-
8/8.1 & 8.2(SIZES AND TOLERANCES-Mean Outside Dia)	-	250	-
8/8.1 & 8.2(SIZES AND TOLERANCES-Mean Wall thickness)	-	250	-
8/8.1 & 8.2(SIZES AND TOLERANCES-Length)	-	250	-
9/9.1/Appendix A(PRESSURE TESTS-Hydraulic Test)	-	1000	-
9/9.2(PRESSURE TESTS-Pneumatic Test)	-	1000	-
10/10.1-Table 2(PHYSICAL TEST- Hardness (HV)-IS : 1501 (Part 1))	-	500	-
10/10.2-Table 2(PHYSICAL TEST- Tensilt Test - IS : 2655)	-	500	-
10/10.3(PHYSICAL TEST- Drifting Test- (For tubes upto and Including 100 mm nom OD))	-	1000	-
10/10.4 (10.4.1)("PHYSICAL TEST-Flattening Test (For Tubes ≤ 2.5 mm Wall Thickness and not Exceeding 100 mm Outside Diameter)")	-	500	-
10/10.4 (10.4.2)(PHYSICAL TEST-Flattening Test (For Tubes ≥ 2.5 mm Wall Thickness and More Than 100 mm Outside Diameter))	-	500	-
10/10.5(PHYSICAL TEST- Double Bend TestDouble Bend Test ( For Round Tubes ≤ 2.5 mm Wall Thickness and Over 100 mm Outside Diameter ))	-	500	-
10/10.6(PHYSICAL TEST- Mercurous Nitrate Test- IS : 2305)	-	1500	-
11/11.1(MARKING)	-	250	-
5(Chemical Composition - IS 3685)	-	3000	-

-
Scope Restricted to Tubes of wall thickness upto 10 mm

12636

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

65550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	250	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	250	-
6(Visual Appearance)	-	300	-
7.1(Hydraulic Characteristics - Quality test)	-	4800	-
7.1(Hydraulic Characteristics - Acceptance test)	-	1600	-
7.2(Reversion Test)	-	1000	700+300
7.3(Tensile Test- i) Tensile Strength)	-	1350	1100+250
7.3(Tensile Test - ii)Elongation at Break)	-	0	-
7.4(Fusion Compatibility Test- a) Quality test)	-	4800	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	-
7.5(Density)	-	500	-
7.6(Melt Flow Rate)	-	1100	-
4.2(Carbon black- a)carbon content)	-	925	-
4.2(Carbon black- b) Dispersion of carbon black)	-	700	-
7.4 Table-2(Fusion Compatibility Test)	-	4800	-
6.1(VISUAL APPEARANCE)	-	300	-
5.1.2(Ovality)	-	250	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	500	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
4.1.3(Workmanship and appearance)	-	300	-
4.1.4(Holding attachments for coupler parts)	-	850	-
6.1.3(Weldability Test- a) Quality test)	-	4800	-
6.1.3(Weldability Test- b) Acceptance test)	-	1600	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	500	-
4.1 (b)(HDPE couplers —)	-	2200	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	850	-

31 Dec, 2026

-
-

12637

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 16098 Part 2 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

99000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 Table-10 (i)(Ring Stiffness)	-	1100	-
Table -1 Cl. No. 5.1, i)(Base Density)	-	500	-
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	1100	-
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	2200	-
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	1100	-
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	4800	-
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	11000	-
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	1100	-
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	500	-
6.3.2(Length of Pipe)	-	250	-
8.1.1 Table-10 (iv)(Creep ratio)	-	26300	25200+1100
6.3.3(Out Side Diameter)	-	250	-
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	1100	-
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	250	-
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	1000	-
6.3.5.2(Wall Thickness(e4 min))	-	250	-
9 Table 12 (ii)(Water tightness)	-	1000	-
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	250	-
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	39000	-
7.1(Appearance)	-	300	-
7.1.1(Color of Finished Pipes)	-	300	-
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	1100	-

31 Dec, 2026

-
-

12638

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

9725 View breakup
Rs. 9,725/-, For BIS Samples Rs. 7,431/-; For Raw Material : Rs. 6,700/-, For BIS Samples Rs. 5,181/-.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	1050	--
4.1.c.i (Density)	-	1125	500+625
4.1.c.ii (Toluene extract - Annex A)	-	1100	--
4.1.c.iii (Volatile matter - Annex B )	-	700	--
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	--
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	--
7.3(Tensile Test)	-	1350	1100+250
7.3(Elongation at Break)	-	0	--
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	--
7.2(Reversion Test)	-	900	700+200

31 Dec, 2026

-
-

12639

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

31025 View breakup
For Elastomeric Sealing Ring Socket Pipe : Rs. 26,825/- , For BIS Samples Rs. 20,244/-; For Plain Ended/Socket Ended Pipes : Rs. 20,975, For BIS Samples Rs. 15,856/-; For Plumbing Pipes : Rs. 9,975, For BIS Samples Rs. 7,606/-; For PVC Resin : Rs. 4,100/- , For BIS Samples Rs. 3,075/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	300	-
10.1(Surface Finish)	-	300	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	250	-
10.7(Sulphated Ash Content)	-	950	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	250	-
9.1(PIPE ENDS)	-	300	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1000	700+300
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	11000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	-
11.2(Resistance to External Blows at 0°C)	-	1400	1100+300
10.3(Effect on Water Test)	-	3000	-
6.1.2(PVC Resin)	-	4100	3000+1100

31 Dec, 2026

-
REVISED VERSION OF IS 4985:2021 INCLUDED W.E.F. 14-10-2021. Size upto 400mm.

12640

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

19062 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	1050	--
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	1050	--
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	2000	--
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	1125	500+625
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1000	--
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	700	--
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	925	--
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	--
6.2.2(Fittings)	-	250	--
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	--
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	1000	--
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	--
8.2.1(Unregu/Qt~d Emining Pipe)	-	0	--
8.2.2(Regulated Emitting Pipes)	-	1000	--
8.3.1(Wall Thickness ofEmitting Pipe)	-	250	--
8.3.2(Inside Diameter ofEmitting Pipe)	-	250	--
8.3.3(Flow Paths in Emitting Unit)	-	200	--
8.3.4(Spacing ofEmitter Units)	-	200	--
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1000	--
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	1600	--
8.5(Resistance to Tension at Elevated Temperature)	-	1100	--
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	400	--
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1200	--
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1600	--
8.8(Determination of Emitting Unit Exponent)	-	600	--
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	0	--
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0	--
4.1 a(Identification)	-	1050	-
4.1 a(Identification)	-	1050	-
4.1 d(Density)	-	500	-
4.1 c(Volatile matter Extract)	-	800	-
4.2(Carbon black content)	-	925	-
4.2(Carbon black dispersion)	-	700	-

31 Dec, 2026

-
-

12641

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

4700 View breakup
Rs. 4,700/-, For BIS Samples Rs. 3,525/- .

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	300	Construction & Workmanship
7.2(Flow path in emitters)	-	300	Flow Path in Emitter
7.3.1(Resistance to Hydrostatic pressure)	-	999.99	Resistance to Hydrostatic pressure
7.3.2(Resistance to Hydrostatic pressure)	-	0	included in 7.3.1
7.3.3(Resistance to Hydrostatic pressure)	-	0	included in 7.3.1
7.4.1(Emitter Pull Out In-line emitters)	-	500	Emitter Pullout
7.4.2(Emitter Pull Out On-line emitters)	-	0	Included in 7.4.1
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000	Uniformity of emission rate
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	Included in 8.1.2
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	1000	Emission rate as a function of inlet pressure
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	0	Included 8.2.2
8.3(Determination of Emitter Exponent)	-	600	Determination of Emitter Exponent
4(Classification)	-	0	-

31 Dec, 2026

-
-

12642

CIPET, Jaipur

8122834

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

All size

1925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	4100	Testing charges for ( VCM Conten + K- Value)
4(Size of fitting)	-	0	-
5.1 Table-1 Fig.1(Dimension of Socket length)	-	500	-
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	0	-
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	0	-
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	0	-
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	575	-
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850	-
8(Marking)	-	300	-
3.2.3(socket, measurements)	-	0	-
6.3(Effect on water test)	-	3000	-

21 Feb, 2029

-
up to 500 mm dia

12643

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

49525 View breakup
Rs. 49525/-; For BIS Samples : Rs. 31,869/- ; Raw Material : Rs. 5,825/-; For BIS Sample : Rs. 4,525/-; For Carbon Black Master Batch : Rs. 1,875/-; For BIS Sample : Rs. 1,406/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, 5.1 table-1(MATERIALS)	-	0	--
5.2(Polyethylene Resin)	-	1050	--
5.3 (a)(Carbon Black Master Batch)	-	1875	925+950
5.3(b)(Carbon Black Master Batch)	-	500	--
5.3(c)(Carbon Black Master Batch)	-	900	--
5.3(d)(Carbon Black Master Batch)	-	700	--
5.3(e)(Carbon Black Master Batch)	-	950	--
8.3(Carbon black)	-	925	--
8.6(Overall migration)	-	2000	1700+300
6, 6.1(PIPE DESCRIPTION)	-	0	--
6.2(Colour)	-	300	--
6.2.1(6.1.1 Identification Stripes)	-	250	--
7.2(Length)	-	250	--
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	500	--
7.4.1.2(Ovality)	-	250	--
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	100 hrs test=4000 48 hrs test =1600 165 hrs test =4800 1000 hrs test = 11000
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	--
8.2(Longitudinal Reversion Test)	-	900	700+200
8.4( Melt Flow Rate)	-	1100	--
8.5 (Oxidation Induction Time)	-	2200	--
8.7(Density)	-	500	--
8.8(Tensile Strength for Butt-fusion)	-	1600	--
8.9 table-6(Elongation at Break)	-	1600	--
8.10(Slow Crack Growth Rate)	-	6000	5500+500

31 Dec, 2026

-
Size upto 400mm

12644

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

13850 View breakup
For Storage Tanks upto 1500 litres: Rs. 17,150/-, For BIS Samples Rs. 13,175/-; For Storage Tanks above 1500 litres: Rs. 18,050/-, For BIS Samples Rs. 13,850/- .

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	925	Carbon black content *
4.2.3(Carbon Dispersion Test)	-	700	Carbon black content
5(Types and Features )	-	3100	Net & Gross Capacity 500 Overall Diameter 250 Overall Height 250 Internal dia of man - hole 250 Wall thickness upon effective height 250 Wall thickness above effective height 250 Minimum weight without lid 500
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	included in Types and feature
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	included in Types and feature
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	included in Types and feature
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	included in Types and feature
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	included in Types and feature
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	included in Types and feature
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	included in Types and feature
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	included in Types and feature
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	included in Types and feature
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	included in Types and feature
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	included in Types and feature
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	included in Types and feature
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	included in Types and feature
5.3(Types and Features )	-	0	included in Types and feature
5.6(Types and Features )	-	0	included in Types and feature
6.1(Finish)	-	300	Finish / Visual Appearance
7.1.1(Resistance to Deformation)	-	700	Resistance to deformation
7.1.2(Resistance to Deformation)	-	0	Resistance to deformation
7.2(Resistance to Impact)	-	1100	Resistance to impact
7.3(Test for Top Load Resistance)	-	900	Top load resistance (for 1500 lit and more)
7.4(Tensile Strength)	-	1100	Tensile Strength
7.5(Flexural Modulus)	-	1100	Flexural modulus
7.6(overall Migration)	-	1700	Overall Migration 40°C / Water/ 10 days

31 Dec, 2026

-
-

12645

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 15500 : PART 6 (2021)

Deepwell Handpumps, Components and Secial Tools — Specification Part 6 Handpumps

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Fig. 6.1 (Brass Liner)	-
Fig. 6.2 ("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.3 (Upper Valve (for SDWP, EDWP, VLOM 65 and FLP))	-
Fig. 6.4 (" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.4 (" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.4 (" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.4 (" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.4 (" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.4 (" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.4 (" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.5 ("Bucket Spacer-Lower (for EDWP)")	-
Fig. 6.5 ("Bucket Spacer-Lower (for EDWP)")	-
Fig. 6.5 ("Bucket Spacer-Lower (for EDWP)")	-
Fig. 6.5 ("Bucket Spacer-Lower (for EDWP)")	-
Fig. 6.5 ("Bucket Spacer-Lower (for EDWP)")	-
Fig. 6.6 (Follower (SDWP and FLP))	-
Fig. 6.7 (Follower-EDW)	-
Fig. 6.11 ("Rubber Seat Retainer (for SDWP, EDWP & FLP)")	-
Fig. 6.12 ("Check Valve Seat-Standard (for SDWP & EDWP)")	-
Fig. 6.13 (Check Valve Seat-VLOM 65)	-
Fig. 6.13 (Check Valve Seat-VLOM 65)	-

-
Exclusion Material Testing.

12646

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 15500 : PART 5 (2021)

Deepwell Handpumps, Components and Secial Tools — Specification Part 5 Handpumps

1800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Fig. 5.1 (Cylinder Body-Standard (for SDWP and FLP))	-
Fig. 5.1 (Cylinder Body-Standard (for SDWP and FLP))	-
Fig. 5.2 (Cylinder Body-Long (for EDWP and VLOM 65))	-
Fig. 5.2 (Cylinder Body-Long (for EDWP and VLOM 65))	-
Fig. 5.3 (Cylinder Body-VLOM 50)	-
Fig. 5.3 (Cylinder Body-VLOM 50)	-
Fig. 5.4 ("Reducer Cap (for SDWP, EDWP and FLP)")	-
Fig. 5.4 ("Reducer Cap (for SDWP, EDWP and FLP)")	-
Fig. 5.5 B ("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-
Fig. 5.6 A (Cylinder Caps-VLOM 50)	-
Fig. 5.6 B (Cylinder Caps-VLOM 50)	-

-
Exclusion Material Testing.

12647

Allumera Engineering Solutions Pvt ltd

8175206

IS 16714 (2018)

Ground granulated blast furnace slag for use in cement, mortar and concrete - Specification

all

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 and Table 2 i(Fineness IS 4031 (Part 2))	-	1000	-
6 and Table 2 ii a(Slag activity index -7 days)	-	1350	-
6 and Table 2 ii b(Slag activity index -28 days)	-	1500	-
Clause 5.1(Manganese oxide (MnO))	-	950	-
Clause 5.1(Magnesium oxide (MgO))	-	950	-
Clause 5.1(Sulphide sulphur (S))	-	950	-
Clause 5.1(Sulphate (as SO3),)	-	700	-
Clause 5.1(Insoluble residue)	-	750	-
Clause 5.1(Chloride content)	-	750	-
Clause 5.1(Loss on ignition)	-	750	-
Clause 5.1((CaO+MgO+1/3AlO3)/( SiO2 +2/3 AlO3))	-	1350	-
Clause 5.1((CaO+MgO+Al2O3)/ SiO2)	-	1350	-
Clause 5.1((CaO+CaS+1/2 MgO+Al2O3)/ (SiO2+ MnO))	-	1000	-

13 Dec, 2026

-
-

12648

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

All

7913 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (Fabric)	-	1050	--
4.2 (Fabric)	-	250	--
4.3(Sacks)	-	300	--
4.4(Seam)	-	250	--
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	1050	--
4.4(Seam The stitching shall be done with double fold over seam to)	-	1100	--
4.7(Valve for Filling of Sacks)	-	250	--
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	400	--
4.5(Lamination )	-	500	--
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	500	--
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2200	--
5/5.6 (UV Resistance, )	-	10180	--
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	2200	--
4.4(Seam)	-	2200	--
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1100	--
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1100	--
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	--
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	--
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	1100	--
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	1100	--
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	950	--
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	2200	--

16 May, 2028

-
-

12649

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 14611 (2016)

Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision)

All

33599 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Workmanship)	-	250	-
Cl. 6.2(Substance)	-	250	-
Cl. 6.4(water proofness test)	-	1000	-
Cl. 6.5(Strenght of joints/seams)	-	1100	-
Cl. 6.6(Flex test)	-	9000	-
Cl. 6.7(Ease of in-situ Repair)	-	250	-
Cl. 7.1(Eyelets and rope lashing)	-	250	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light)	-	2200	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	2200	-
Cl. 6.3(Accelerated ageing test)	-	4200	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- XLN Extra light)	-	2200	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- XLN Extra light)	-	2200	-
Table1 - v)(Dart Impact Strength)	-	850	-
Table1 - vi)(Average Tensile Strength & Elongation at Break after Exposing to UV Radiation & Weathering)	-	10180	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- XLN Extra light)	-	2200	-

16 May, 2028

-
-

12650

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 9755 (2016)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision)

All

20605 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MANUFACTURE-Raw Material)	-	1050	--
3.2(MANUFACTURE-)	-	250	--
3.2(MANUFACTURE)	-	500	--
3.3(Sacks)	-	300	--
3.4(Liner)	-	1050	--
3.4.1(Liner)	-	250	--
3.4.1(Liner)	-	200	--
3.4.2(Lamination)	-	300	--
3.4.2(Lamination)	-	250	--
3.5(Bottom Seam-(see IS 10789).)	-	250	--
3.5(Bottom Seam-(see IS 10789).)	-	1050	--
3.7(Mouth of the Sack)	-	250	--
3.8(Capacity- The sack shall have the nominal capacity of 50 kg.)	-	250	--
4.1 , Table 1(REQUIREMENTS)	-	250	--
4.1 , Table 1(REQUIREMENTS)	-	1000	--
4.2(UV Resistance)	-	2200	--
4.2(UV Resistance)	-	1100	--
4.2(UV Resistance)	-	10180	--
4.2(UV Resistance-The HDPE/PP woven fabric of sack made out of UV stabilized material shall have at least 50 percent of the original breaking strength when tested after the same has been exposed to UV radiation and weathering as per the method given in Annex D.)	-	2200	--
4.3(Mass-(Annexure E))	-	950	--
4.3(Mass-(Annexure E))	-	250	--
3.6(Bottom Seam-tThe stitching shall be done with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric.)	-	250	--

16 May, 2028

-
-

12651

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

All

31869 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(Colour)	-	250	-
6.2.1(6.1.1 Identification Stripes)	-	250	-
7.2(Length)	-	0	-
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	500	-
8.5 (Oxidation Induction Time)	-	2200	-
6, 6.1(PIPE DESCRIPTION)	-	300	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	-
8.2(Longitudinal Reversion Test)	-	900	-
8.3(Carbon black)	-	1625	-
8.4( Melt Flow Rate)	-	1100	-
8.6(Overall migration)	-	2000	-
8.7(Density)	-	500	-
8.8(Tensile Strength for Butt-fusion)	-	1600	-
8.9 table-6(Elongation at Break)	-	1600	-
8.10(Slow Crack Growth Rate)	-	6000	-

16 May, 2028

-
Up to 355mm.

12652

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

All

30419 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.1 (Visual and Workmanship Requirement)	-	300	-
4.1 .1.2.1(HDPE couplers)	-	1000	-
4.1 .1.2.2(HDPE couplers)	-	2200	-
Cl.4.1(Quick Coupled Male and Female Couplers)	-	925	-
Cl.4.1(Quick Coupled Male and Female Couplers)	-	3500	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	0	-
3(QUICK COUPLED PIPES)	-	19175	-
Cl.4.1.3(Workmanship and appearance )	-	1050	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	300	-
Cl 4.1.5(Rubber rings- A)Shore hardness (Shore-A))	-	375	-
Cl 4.1.5(Rubber rings- B) Change in hardness)	-	375	-
4.1.5(Rubber Ring)	-	4200	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	850	-
6.1.3, 6.1.3.1(Weldability Test)	-	6400	-

16 May, 2028

-
for HDPE couplers & fittings only

12653

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

All

20319 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(DIMENSIONS-PIPE-Nominal Diameter)	-	500	--
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	--
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	--
10.1(Colour)	-	0	--
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	--
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	--
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	--
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	--
Clause 10.7(Sulphated Ash Content)	-	950	--
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	--
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	--
11.2(Resistance to External Blows at 0°C)	-	1400	--
10.3(Effect on Water)	-	3000	--
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0	--
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	--
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	--
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	0	--
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	--
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	--
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	--
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	--
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	--
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	--
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	--

16 May, 2028

-
-

12654

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 10889 (2004)

High density polyethylene films (First Revision)

Grade-1 & 2

5850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials)	-	1600	500 density + 1100 MFI
5.2(Black Compound)	-	1625	925 CBC + 700 CBD
6.1.1(Appearance)	-	100	--
6.1.2(Film Form)	-	100	--
6.1.3(Odour )	-	100	--
6.1.4(Density)	-	500	--
6.1.5(Melt Flow Rate)	-	1100	--
6.1.6(Black Film)	-	1625	925 CBC + 700 CBD
6.2.1, Table 1(Nominal Thickness)	-	250	--
6.2.2, Table 2(Nominal Width)	-	250	--
6.3, Table 3(Yield Tolerance)	-	600	--
6.4.1(Tensile Strength at Break)	-	2200	MD & TD
6.4.2(Elongation at Break)	-	0	--
6.4.3(Impact Resistance (Falling Dart))	-	850	--

16 May, 2028

-
-

12655

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

All

7431 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	1050	-
4.1.c.ii (Toluene extract - Annex A)	-	1100	-
4.1.c.iii (Volatile matter - Annex B )	-	700	-
4.1.c.i (Density)	-	1125	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	-
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	-
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	250	-
6.1(Visual Appearance)	-	300	-
7.1(Hydraulic Characteristics)	-	4000	-
7.2(Reversion Test)	-	1000	-
7.3(Tensile Test)	-	1350	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	-

16 May, 2028

-
-

12656

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

Capacity upto 1000 litre

13850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	1850	925 Tank + 925 Lid
4.2.3(Carbon Dispersion Test)	-	1400	700 Tank + 700 Lid
5(Types and Features )	-	0	--
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	--
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	--
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	--
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	--
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	--
5.3(Types and Features )	-	600	300 Tank + 300 Lid
5.4(Wall Thickness above effective height)	-	500	250 + 250 outer layer
6.1(Finish)	-	300	--
7.1.1(Resistance to Deformation)	-	700	--
7.2(Resistance to Impact)	-	1100	--
7.4(Tensile Strength)	-	1350	1100 + 250 specimen charges
7.5(Flexural Modulus)	-	1600	1100 + 500 Specimen charges
7.6(overall Migration)	-	2200	1700 + 500 Specimen charges
9.1(Man-Hole and Hand-Hole Lids)	-	1050	--
9.1(Lid Thickness)	-	250	--
9.2.1(Man-Hole and Hand-Hole Lids)	-	400	--
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	--
7.1.2(Resistance to Deformation)	-	700	--

16 May, 2028

-
-

12657

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

All

8681 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Colour)	-	300	-
6(Dimensions of pipes)	-	250	-
7(Visual Appearance)	-	300	-
8.1(Hydraulic characteristics)	-	6400	-
8.2(Reversion)	-	1000	-
8.3(Density)	-	500	-
8.4(Melt Flow Rate)	-	1100	-
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	-

16 May, 2028

-
-

12658

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

All

14519 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	1125	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	1625	-
5.1 table -1(DIMENSIONS OF PIPES)	-	500	-
6.1(VISUAL APPEARANCE)	-	300	-
7.1 Table -2(Hydraulic Characteristics)	-	6400	-
7.2(Reversion Test)	-	1000	-
7.3(Tensile Test)	-	1350	-
7.4table-2(Fusion Compatibility Test)	-	6400	-
7.5(Density)	-	500	-
7.6(Melt now Rate (MFR))	-	1100	-

16 May, 2028

-
-

12659

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

Type I & Type II

13531 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	--
5.1.1(Appearance)	-	100	--
5.1.2(Film Form)	-	100	--
5.1.3(Odour)	-	100	--
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	--
5.1.6a(Carbon Black Content, Annex-A)	-	925	--
5.1.6b(Ash Content, Annex-A)	-	950	--
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	--
5.2.2(Tolerance on Thickness, Annex-A)	-	500	--
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1350	1100 + 250(Specimen Charges)
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1100	--
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300	--
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	0	--
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	0	--
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000	--
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1000	750 + 250 (Specimen Charges)
6.1, Table 1(Tear resistence. B) Transverse direction )	-	750	--
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	1350	1100 + 250(Specimen Charges)
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	1100	--
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300	--
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	0	--
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	0	--
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	1000	--
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
8.1, Table 3(Tear resistance , Annex B)	-	0	--
8.1, Table 3(Puncture resistance , Annex C)	-	0	--
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
9.1, Table 4(Tear resistance , Annex B)	-	0	--
9.1, Table 4(Puncture resistance , Annex C)	-	0	--
Clause 5.2.3(Tolerance on Width)	-	0	--

16 May, 2028

-
for Type I &II only

12660

Allumera Engineering Solutions Pvt ltd

8175206

IS 455 (2015)

Portland slag cement - Specification

PSC

19750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	2000	-
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	2000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	1600	-
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	2000	-
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	1650	-
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	1250	-
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2500	-
7 Table 1 i(Fineness IS 4031(Part 2))	-	1000	-
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	1000	-
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	1600	-
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	550	-
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	550	-
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	1450	-
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	1650	-
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	1850	-
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	3500	-
11.3(Consistency(IS:4031(Pt-4)-1988)	-	600	-

13 Dec, 2026

-
Exclusion: Cl.7 Table-2 (v) (Transverse Strength)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number