| 8(Test finger as shown in figure 2 with force 20 N/30 N) |
- |
400 |
|
10 % Discount for BIS |
| 9(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 9.1.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 9.1.2(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 9.1.3(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 9.2(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V) |
- |
400 |
|
10 % Discount for BIS |
| 9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
10 % Discount for BIS |
| 9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
10 % Discount for BIS |
| 9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
10 % Discount for BIS |
| 9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
10 % Discount for BIS |
| 9.4(by inspection and by plating) |
- |
400 |
|
10 % Discount for BIS |
| 9.4.1(by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 9.4.2(by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 9.5.1(by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 9.5.2(by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.1(By inspection and as per IEC 60988-2-2) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.1.1(By inspection and as per IEC 60988-2-2) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.2(By inspection ) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.3(By inspection ) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.4(by inspection, by measurement and by fitting conductors of the
smallest and largest cross-sectional areas specified or declared.) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.5(By measurement) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.5.1(by inspection, by measurement, by torque test) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.6(by inspection after cl 10.1.5) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.7(by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.11(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a
nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and
clamped in the terminal. The free wire is bent, without tearing the insulation back , in every
direction , but without making sharp bends around barriers.) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.13(By inspection and after the test of cl 17) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.14(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.15(Figure 11 or 12) |
- |
400 |
|
10 % Discount for BIS |
| 10.2(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 10.2.1(Table 10.2.1) |
- |
400 |
|
10 % Discount for BIS |
| 10.2.2(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 10.2.3(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 10.2.4.1(Figure 14 or 15) |
- |
400 |
|
10 % Discount for BIS |
| 10.2.4.2(During the test of cl 14) |
- |
400 |
|
10 % Discount for BIS |
| 10.2.4.3(As per table 10.2.4.3) |
- |
400 |
|
10 % Discount for BIS |
| 10.2.4.4(As per Figure 16) |
- |
400 |
|
10 % Discount for BIS |
| 11.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.1.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.1.2(by inspection and by analysis of the material) |
- |
400 |
|
10 % Discount for BIS |
| 11.1.3(by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.2(by inspection and by test) |
- |
400 |
|
10 % Discount for BIS |
| 11.2.2(by inspection, by measurement and/or by manual test) |
- |
400 |
|
10 % Discount for BIS |
| 11.2.3(by inspection, by measurement and/or by manual test) |
- |
400 |
|
10 % Discount for BIS |
| 11.2.3.2(by inspection, by measurement and/or by manual test) |
- |
400 |
|
10 % Discount for BIS |
| 11.2.4(as per lEC 60227 or IEC 60245.) |
- |
400 |
|
10 % Discount for BIS |
| 11.2.5(As per annexure H, cl 11.2.5) |
- |
400 |
|
10 % Discount for BIS |
| 11.3.1(by inspection and by the tests of clauses 13 and 20) |
- |
400 |
|
10 % Discount for BIS |
| 11.3.2(by inspection and by the tests of clauses 13) |
- |
400 |
|
10 % Discount for BIS |
| 11.3.3(by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.3.4(by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.3.5(by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. ) |
- |
400 |
|
10 % Discount for BIS |
| 11.3.7(by inspection, and if necessary as per cl 11.3.7.2) |
- |
400 |
|
10 % Discount for BIS |
| 11.3.8(by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical) |
- |
400 |
|
10 % Discount for BIS |
| 11.4.1 (by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.4.2(by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.4.3(by the tests of clauses 15 to 17) |
- |
400 |
|
10 % Discount for BIS |
| 11.4.4 to 11.4.16(As per relevent type) |
- |
400 |
|
10 % Discount for BIS |
| 11.5(by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.6.1(by inspection and by manual test) |
- |
400 |
|
10 % Discount for BIS |
| 11.6.2(by inspection and by manual test) |
- |
400 |
|
10 % Discount for BIS |
| 11.6.3.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.6.3.2(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.6.3.3(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.6.3.4(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.6.3.5(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.6.3.6(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.6.3.7(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.7.1(By Flexing test as per fig 9) |
- |
400 |
|
10 % Discount for BIS |
| 11.7.1.2.2(By Flexing test as per fig 9) |
- |
400 |
|
10 % Discount for BIS |
| 11.7.1.2.3(By Flexing test as per fig 9) |
- |
400 |
|
10 % Discount for BIS |
| 11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1) |
- |
400 |
|
10 % Discount for BIS |
| 11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2) |
- |
400 |
|
10 % Discount for BIS |
| 11.8(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.8.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.8.2(By inspection and as per table 11.8.2) |
- |
400 |
|
10 % Discount for BIS |
| 11.8.3(by inspection and by connecting cords of the largest cross-sectional
eree used in 10.1.4) |
- |
400 |
|
10 % Discount for BIS |
| 11.9.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.9.1.1(by inspection and manual test) |
- |
400 |
|
10 % Discount for BIS |
| 11.9.1.2(by inspection and manual test) |
- |
400 |
|
10 % Discount for BIS |
| 11.9.1.3(by inspection and manual test) |
- |
400 |
|
10 % Discount for BIS |
| 11.9.1.4(by inspection and manual test) |
- |
400 |
|
10 % Discount for BIS |
| 11.10.1(by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.10.2(by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.10.3(by inspection and by test of socket-outlet system) |
- |
400 |
|
10 % Discount for BIS |
| 11.11(Requirements during mounting, maintenance and servicing) |
- |
400 |
|
10 % Discount for BIS |
| 11.11.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.11.1.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.11.1.2(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3) |
- |
400 |
|
10 % Discount for BIS |
| 11.11.1.5.4(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.11.1.5.6(by pull test) |
- |
400 |
|
10 % Discount for BIS |
| 11.11.2(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
400 |
|
10 % Discount for BIS |
| 11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
400 |
|
10 % Discount for BIS |
| 11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
400 |
|
10 % Discount for BIS |
| 11.11.4(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.11.5(By inspection and by manual test) |
- |
400 |
|
10 % Discount for BIS |
| 11.11.6(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.11.7(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.12(As per H, cl 11.12) |
- |
400 |
|
10 % Discount for BIS |
| 11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. ) |
- |
400 |
|
10 % Discount for BIS |
| 11.1.102(As per IEC 60216-1:2001) |
- |
400 |
|
10 % Discount for BIS |
| 11.4.13.102(an impact tool is dropped once from a height of 0.60 m ) |
- |
400 |
|
10 % Discount for BIS |
| 11.4.101(as per cl 11.4.101) |
- |
400 |
|
10 % Discount for BIS |
| 11.4.103(table 7.2 item 103 and by the test of cl 17.15) |
- |
400 |
|
10 % Discount for BIS |
| 11.4.107(As per annexure DD) |
- |
400 |
|
10 % Discount for BIS |
| 11.6.3.101(As per table 7, item 117) |
- |
400 |
|
10 % Discount for BIS |
| 11.101(As per annexure BB) |
- |
400 |
|
10 % Discount for BIS |
| 12.1(As per IEC 60529) |
- |
400 |
|
10 % Discount for BIS |
| 12.1.6.2(Torque test) |
- |
400 |
|
10 % Discount for BIS |
| 12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C) |
- |
400 |
|
10 % Discount for BIS |
| 12.3(as per cl 12.3.1 to 12.3.7) |
- |
400 |
|
10 % Discount for BIS |
| 12.101(None) |
- |
400 |
|
10 % Discount for BIS |
| 12.101.2(15 K+Tmax for 16 hr) |
- |
400 |
|
10 % Discount for BIS |
| 12.101.5(as per 12.103 to 12.105) |
- |
400 |
|
10 % Discount for BIS |
| 12.101.6(a voltage equal to (2
x VR) + 1 000 V is applied at rated frequency for 1 min ) |
- |
400 |
|
10 % Discount for BIS |
| 13.1(as per table 13.1) |
- |
400 |
|
10 % Discount for BIS |
| 13.2(As per table 13.2) |
- |
400 |
|
10 % Discount for BIS |
| 13.3.1 to 13.3.4(as per clause 13.3.4) |
- |
400 |
|
10 % Discount for BIS |
| 14.1(As per table 14.1) |
- |
400 |
|
10 % Discount for BIS |
| 14.3(As per table 14.1) |
- |
400 |
|
10 % Discount for BIS |
| 14.101.1( as per cl 14.102 and 14.102.1) |
- |
400 |
|
10 % Discount for BIS |
| 15(as per cl 15.1 to 15.4) |
- |
400 |
|
10 % Discount for BIS |
| 15.5(as per cl 15.5 to 15.6) |
- |
400 |
|
10 % Discount for BIS |
| 15.6.4(42 of table 7.2, and as per annexure AA) |
- |
400 |
|
10 % Discount for BIS |
| 15.7(as per annexure J, cl 15.7) |
- |
400 |
|
10 % Discount for BIS |
| 15.5.3.101 to 15.5.3.105(According to type of control) |
- |
400 |
|
10 % Discount for BIS |
| 15.5.3.109( voltage specified in Table 13.2) |
- |
400 |
|
10 % Discount for BIS |
| 16.2(as per cl 16.2.1 to 16.2.3 ) |
- |
400 |
|
10 % Discount for BIS |
| 16.2.4(test of cl 15 repeated ) |
- |
400 |
|
10 % Discount for BIS |
| 16.2.4(42 of table 7.2) |
- |
400 |
|
10 % Discount for BIS |
| 18.1.6(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 18.1.6.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 18.1.6.2(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 18.1.6.3(Pull test as per cl 18.1.6.3) |
- |
400 |
|
10 % Discount for BIS |
| 18.2(Impact tester) |
- |
400 |
|
10 % Discount for BIS |
| 18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4) |
- |
400 |
|
10 % Discount for BIS |
| 18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5) |
- |
400 |
|
10 % Discount for BIS |
| 18.7(Pull test as per table 18.7) |
- |
400 |
|
10 % Discount for BIS |
| 18.8(as per cl 18.8.2 and 18.8.3) |
- |
400 |
|
10 % Discount for BIS |
| 18.9(axial pull of 15N/30N) |
- |
400 |
|
10 % Discount for BIS |
| 18.101(as per cl 18.101.2 and 101.3) |
- |
400 |
|
10 % Discount for BIS |
| 18.102(Hydrualic test) |
- |
400 |
|
10 % Discount for BIS |
| 19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
10 % Discount for BIS |
| 19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
10 % Discount for BIS |
| 19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
10 % Discount for BIS |
| 19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
10 % Discount for BIS |
| 19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
10 % Discount for BIS |
| 19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
10 % Discount for BIS |
| 19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
10 % Discount for BIS |
| 19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
10 % Discount for BIS |
| 19.2.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 19.2.2(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 19.2.3(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 19.2.4(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 19.2.4.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 19.2.5(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 19.2.5.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 19.2.6(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 20.1(as per table 20.2) |
- |
400 |
|
10 % Discount for BIS |
| 20.2.1(as per table 20.3) |
- |
400 |
|
10 % Discount for BIS |
| 20.2.2(as per table 20.4) |
- |
400 |
|
10 % Discount for BIS |
| 21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5) |
- |
400 |
|
10 % Discount for BIS |
| 21.2.7(As per cl G.4) |
- |
400 |
|
10 % Discount for BIS |
| 22.1.1(As per cl 21.1.3 to 21.1.6) |
- |
400 |
|
10 % Discount for BIS |
| 25(as per annexure H) |
- |
400 |
|
10 % Discount for BIS |
| 27.1(as per annexure H) |
- |
400 |
|
10 % Discount for BIS |
| 27.2(as per cl 27.2.1 and 27.2.2) |
- |
400 |
|
10 % Discount for BIS |
| 27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .) |
- |
400 |
|
10 % Discount for BIS |
| H 27.4(as per cl H 27.4.1 and H 27.4.2) |
- |
400 |
|
10 % Discount for BIS |
| 10.1.7.1(by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 11.7.2.11 to 11.7.2.15(By measurement) |
- |
400 |
|
10 % Discount for BIS |
| 5(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 5.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 5.2(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.2(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.3(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.4(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.5(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.5.1(IEC 60529 and by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.5.2(IEC 60529 and by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.5.3(Annexure N and by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.6(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.7.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.7.2(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.8(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.8.2(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.9(Annexure H and by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.1(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.11(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.12(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.13(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.14(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.15(Annexure J and by inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.16(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| 6.18(Annexure H) |
- |
400 |
|
10 % Discount for BIS |
| 6.17(Annexure H) |
- |
400 |
|
10 % Discount for BIS |
| 6.4.3(By inspection) |
- |
400 |
|
10 % Discount for BIS |
| H 17.1.4.2(as per cl H 17.1.4.2) |
- |
400 |
|
10 % Discount for BIS |
| H.17.14(as per cl H 17.4.16) |
- |
400 |
|
10 % Discount for BIS |
| J 17.18.5(as per cl J 17.8.5) |
- |
400 |
|
10 % Discount for BIS |
| J 17.18.5(as per cl J 17.8.6) |
- |
400 |
|
10 % Discount for BIS |
| J 17.17.2(as per table 13.1) |
- |
400 |
|
10 % Discount for BIS |
| J 17.17(As per table 13.2) |
- |
400 |
|
10 % Discount for BIS |
| J. 17. 18.2(as per cl J. 17. 18.2) |
- |
400 |
|
10 % Discount for BIS |
| J. 17. 18.3(as per cl J. 17. 18.3) |
- |
400 |
|
10 % Discount for BIS |
| J. 17. 18.4(as per cl J. 17. 18.4) |
- |
400 |
|
10 % Discount for BIS |
| 8(Test finger as shown in figure 2 with force 20 N/30 N) |
- |
400 |
|
- |
| 9(By inspection) |
- |
400 |
|
- |
| 9.1.1(By inspection) |
- |
400 |
|
- |
| 9.1.2(By inspection) |
- |
400 |
|
- |
| 9.1.3(By inspection) |
- |
400 |
|
- |
| 9.2(By inspection) |
- |
400 |
|
- |
| 9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V) |
- |
400 |
|
- |
| 9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.4(by inspection and by plating) |
- |
400 |
|
- |
| 9.4.1(by inspection) |
- |
400 |
|
- |
| 9.4.2(by inspection) |
- |
400 |
|
- |
| 9.5.1(by inspection) |
- |
400 |
|
- |
| 9.5.2(by inspection) |
- |
400 |
|
- |
| 10.1.1(By inspection and as per IEC 60988-2-2) |
- |
400 |
|
- |
| 10.1.1.1(By inspection and as per IEC 60988-2-2) |
- |
400 |
|
- |
| 10.1.2(By inspection ) |
- |
400 |
|
- |
| 10.1.3(By inspection ) |
- |
400 |
|
- |
| 10.1.4(by inspection, by measurement and by fitting conductors of the
smallest and largest cross-sectional areas specified or declared.) |
- |
400 |
|
- |
| 10.1.5(By measurement) |
- |
400 |
|
- |
| 10.1.5.1(by inspection, by measurement, by torque test) |
- |
400 |
|
- |
| 10.1.6(by inspection after cl 10.1.5) |
- |
400 |
|
- |
| 10.1.7(by inspection) |
- |
400 |
|
- |
| 10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.) |
- |
400 |
|
- |
| 10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction) |
- |
400 |
|
- |
| 10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.) |
- |
400 |
|
- |
| 10.1.11(By inspection) |
- |
400 |
|
- |
| 10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a
nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and
clamped in the terminal. The free wire is bent, without tearing the insulation back , in every
direction , but without making sharp bends around barriers.) |
- |
400 |
|
- |
| 10.1.13(By inspection and after the test of cl 17) |
- |
400 |
|
- |
| 10.1.14(By inspection) |
- |
400 |
|
- |
| 10.1.15(Figure 11 or 12) |
- |
400 |
|
- |
| 10.2(By inspection) |
- |
400 |
|
- |
| 10.2.1(Table 10.2.1) |
- |
400 |
|
- |
| 10.2.2(By inspection) |
- |
400 |
|
- |
| 10.2.3(By inspection) |
- |
400 |
|
- |
| 10.2.4.1(Figure 14 or 15) |
- |
400 |
|
- |
| 10.2.4.2(During the test of cl 14) |
- |
400 |
|
- |
| 10.2.4.3(As per table 10.2.4.3) |
- |
400 |
|
- |
| 10.2.4.4(As per Figure 16) |
- |
400 |
|
- |
| 11.1(By inspection) |
- |
400 |
|
- |
| 11.1.1(By inspection) |
- |
400 |
|
- |
| 11.1.2(by inspection and by analysis of the material) |
- |
400 |
|
- |
| 11.1.3(by inspection) |
- |
400 |
|
- |
| 11.2(by inspection and by test) |
- |
400 |
|
- |
| 11.2.2(by inspection, by measurement and/or by manual test) |
- |
400 |
|
- |
| 11.2.3(by inspection, by measurement and/or by manual test) |
- |
400 |
|
- |
| 11.2.3.2(by inspection, by measurement and/or by manual test) |
- |
400 |
|
- |
| 11.2.4(as per lEC 60227 or IEC 60245.) |
- |
400 |
|
- |
| 11.2.5(As per annexure H, cl 11.2.5) |
- |
400 |
|
- |
| 11.3.1(by inspection and by the tests of clauses 13 and 20) |
- |
400 |
|
- |
| 11.3.2(by inspection and by the tests of clauses 13) |
- |
400 |
|
- |
| 11.3.3(by inspection) |
- |
400 |
|
- |
| 11.3.4(by inspection) |
- |
400 |
|
- |
| 11.3.5(by inspection) |
- |
400 |
|
- |
| 11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. ) |
- |
400 |
|
- |
| 11.3.7(by inspection, and if necessary as per cl 11.3.7.2) |
- |
400 |
|
- |
| 11.3.8(by inspection) |
- |
400 |
|
- |
| 11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical) |
- |
400 |
|
- |
| 11.4.1 (by inspection) |
- |
400 |
|
- |
| 11.4.2(by inspection) |
- |
400 |
|
- |
| 11.4.3(by the tests of clauses 15 to 17) |
- |
400 |
|
- |
| 11.4.4 to 11.4.16(As per relevent type) |
- |
400 |
|
- |
| 11.5(by inspection) |
- |
400 |
|
- |
| 11.6.1(by inspection and by manual test) |
- |
400 |
|
- |
| 11.6.2(by inspection and by manual test) |
- |
400 |
|
- |
| 11.6.3.1(By inspection) |
- |
400 |
|
- |
| 11.6.3.2(By inspection) |
- |
400 |
|
- |
| 11.6.3.3(By inspection) |
- |
400 |
|
- |
| 11.6.3.4(By inspection) |
- |
400 |
|
- |
| 11.6.3.5(By inspection) |
- |
400 |
|
- |
| 11.6.3.6(By inspection) |
- |
400 |
|
- |
| 11.6.3.7(By inspection) |
- |
400 |
|
- |
| 11.7.1(By Flexing test as per fig 9) |
- |
400 |
|
- |
| 11.7.1.2.2(By Flexing test as per fig 9) |
- |
400 |
|
- |
| 11.7.1.2.3(By Flexing test as per fig 9) |
- |
400 |
|
- |
| 11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1) |
- |
400 |
|
- |
| 11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2) |
- |
400 |
|
- |
| 11.8(By inspection) |
- |
400 |
|
- |
| 11.8.1(By inspection) |
- |
400 |
|
- |
| 11.8.2(By inspection and as per table 11.8.2) |
- |
400 |
|
- |
| 11.8.3(by inspection and by connecting cords of the largest cross-sectional
eree used in 10.1.4) |
- |
400 |
|
- |
| 11.9.1(By inspection) |
- |
400 |
|
- |
| 11.9.1.1(by inspection and manual test) |
- |
400 |
|
- |
| 11.9.1.2(by inspection and manual test) |
- |
400 |
|
- |
| 11.9.1.3(by inspection and manual test) |
- |
400 |
|
- |
| 11.9.1.4(by inspection and manual test) |
- |
400 |
|
- |
| 11.10.1(by inspection) |
- |
400 |
|
- |
| 11.10.2(by inspection) |
- |
400 |
|
- |
| 11.10.3(by inspection and by test of socket-outlet system) |
- |
400 |
|
- |
| 11.11(Requirements during mounting, maintenance and servicing) |
- |
400 |
|
- |
| 11.11.1(By inspection) |
- |
400 |
|
- |
| 11.11.1.1(By inspection) |
- |
400 |
|
- |
| 11.11.1.2(By inspection) |
- |
400 |
|
- |
| 11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3) |
- |
400 |
|
- |
| 11.11.1.5.4(By inspection) |
- |
400 |
|
- |
| 11.11.1.5.6(by pull test) |
- |
400 |
|
- |
| 11.11.2(By inspection) |
- |
400 |
|
- |
| 11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
400 |
|
- |
| 11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
400 |
|
- |
| 11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
400 |
|
- |
| 11.11.4(By inspection) |
- |
400 |
|
- |
| 11.11.5(By inspection and by manual test) |
- |
400 |
|
- |
| 11.11.6(By inspection) |
- |
400 |
|
- |
| 11.11.7(By inspection) |
- |
400 |
|
- |
| 11.12(As per H, cl 11.12) |
- |
400 |
|
- |
| 11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. ) |
- |
400 |
|
- |
| 11.1.102(As per IEC 60216-1:2001) |
- |
400 |
|
- |
| 11.4.13.102(an impact tool is dropped once from a height of 0.60 m ) |
- |
400 |
|
- |
| 11.4.101(as per cl 11.4.101) |
- |
400 |
|
- |
| 11.4.103(table 7.2 item 103 and by the test of cl 17.15) |
- |
400 |
|
- |
| 11.4.107(As per annexure DD) |
- |
400 |
|
- |
| 11.6.3.101(As per table 7, item 117) |
- |
400 |
|
- |
| 11.101(As per annexure BB) |
- |
400 |
|
- |
| 12.1(As per IEC 60529) |
- |
400 |
|
- |
| 12.1.6.2(Torque test) |
- |
400 |
|
- |
| 12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C) |
- |
400 |
|
- |
| 12.3(as per cl 12.3.1 to 12.3.7) |
- |
400 |
|
- |
| 12.101(None) |
- |
400 |
|
- |
| 12.101.2(15 K+Tmax for 16 hr) |
- |
400 |
|
- |
| 12.101.5(as per 12.103 to 12.105) |
- |
400 |
|
- |
| 12.101.6(a voltage equal to (2
x VR) + 1 000 V is applied at rated frequency for 1 min ) |
- |
400 |
|
- |
| 13.1(as per table 13.1) |
- |
400 |
|
- |
| 13.2(As per table 13.2) |
- |
400 |
|
- |
| 13.3.1 to 13.3.4(as per clause 13.3.4) |
- |
400 |
|
- |
| 14.1(As per table 14.1) |
- |
400 |
|
- |
| 14.3(As per table 14.1) |
- |
400 |
|
- |
| 14.101.1( as per cl 14.102 and 14.102.1) |
- |
400 |
|
- |
| 15(as per cl 15.1 to 15.4) |
- |
400 |
|
- |
| 15.5(as per cl 15.5 to 15.6) |
- |
400 |
|
- |
| 15.6.4(42 of table 7.2, and as per annexure AA) |
- |
400 |
|
- |
| 15.7(as per annexure J, cl 15.7) |
- |
400 |
|
- |
| 15.5.3.101 to 15.5.3.105(According to type of control) |
- |
400 |
|
- |
| 15.5.3.109( voltage specified in Table 13.2) |
- |
400 |
|
- |
| 16.2(as per cl 16.2.1 to 16.2.3 ) |
- |
400 |
|
- |
| 16.2.4(test of cl 15 repeated ) |
- |
400 |
|
- |
| 16.2.4(42 of table 7.2) |
- |
400 |
|
- |
| 18.1.6(By inspection) |
- |
400 |
|
- |
| 18.1.6.1(By inspection) |
- |
400 |
|
- |
| 18.1.6.2(By inspection) |
- |
400 |
|
- |
| 18.1.6.3(Pull test as per cl 18.1.6.3) |
- |
400 |
|
- |
| 18.2(Impact tester) |
- |
400 |
|
- |
| 18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4) |
- |
400 |
|
- |
| 18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5) |
- |
400 |
|
- |
| 18.7(Pull test as per table 18.7) |
- |
400 |
|
- |
| 18.8(as per cl 18.8.2 and 18.8.3) |
- |
400 |
|
- |
| 18.9(axial pull of 15N/30N) |
- |
400 |
|
- |
| 18.101(as per cl 18.101.2 and 101.3) |
- |
400 |
|
- |
| 18.102(Hydrualic test) |
- |
400 |
|
- |
| 19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.2.1(By inspection) |
- |
400 |
|
- |
| 19.2.2(By inspection) |
- |
400 |
|
- |
| 19.2.3(By inspection) |
- |
400 |
|
- |
| 19.2.4(By inspection) |
- |
400 |
|
- |
| 19.2.4.1(By inspection) |
- |
400 |
|
- |
| 19.2.5(By inspection) |
- |
400 |
|
- |
| 19.2.5.1(By inspection) |
- |
400 |
|
- |
| 19.2.6(By inspection) |
- |
400 |
|
- |
| 20.1(as per table 20.2) |
- |
400 |
|
- |
| 20.2.1(as per table 20.3) |
- |
400 |
|
- |
| 20.2.2(as per table 20.4) |
- |
400 |
|
- |
| 21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5) |
- |
400 |
|
- |
| 21.2.7(As per cl G.4) |
- |
400 |
|
- |
| 22.1.1(As per cl 21.1.3 to 21.1.6) |
- |
400 |
|
- |
| 25(as per annexure H) |
- |
400 |
|
- |
| 27.1(as per annexure H) |
- |
400 |
|
- |
| 27.2(as per cl 27.2.1 and 27.2.2) |
- |
400 |
|
- |
| 27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .) |
- |
400 |
|
- |
| H 27.4(as per cl H 27.4.1 and H 27.4.2) |
- |
400 |
|
- |
| 10.1.7.1(by inspection) |
- |
400 |
|
- |
| 11.7.2.11 to 11.7.2.15(By measurement) |
- |
400 |
|
- |
| 5(By inspection) |
- |
400 |
|
- |
| 5.1(By inspection) |
- |
400 |
|
- |
| 5.2(By inspection) |
- |
400 |
|
- |
| 6.1(By inspection) |
- |
400 |
|
- |
| 6.2(By inspection) |
- |
400 |
|
- |
| 6.3(By inspection) |
- |
400 |
|
- |
| 6.4(By inspection) |
- |
400 |
|
- |
| 6.5(By inspection) |
- |
400 |
|
- |
| 6.5.1(IEC 60529 and by inspection) |
- |
400 |
|
- |
| 6.5.2(IEC 60529 and by inspection) |
- |
400 |
|
- |
| 6.5.3(Annexure N and by inspection) |
- |
400 |
|
- |
| 6.6(By inspection) |
- |
400 |
|
- |
| 6.7.1(By inspection) |
- |
400 |
|
- |
| 6.7.2(By inspection) |
- |
400 |
|
- |
| 6.8(By inspection) |
- |
400 |
|
- |
| 6.8.2(By inspection) |
- |
400 |
|
- |
| 6.9(Annexure H and by inspection) |
- |
400 |
|
- |
| 6.1(By inspection) |
- |
400 |
|
- |
| 6.11(By inspection) |
- |
400 |
|
- |
| 6.12(By inspection) |
- |
400 |
|
- |
| 6.13(By inspection) |
- |
400 |
|
- |
| 6.14(By inspection) |
- |
400 |
|
- |
| 6.15(Annexure J and by inspection) |
- |
400 |
|
- |
| 6.16(By inspection) |
- |
400 |
|
- |
| 6.18(Annexure H) |
- |
400 |
|
- |
| 6.17(Annexure H) |
- |
400 |
|
- |
| 6.4.3(By inspection) |
- |
400 |
|
- |
| H 17.1.4.2(as per cl H 17.1.4.2) |
- |
400 |
|
- |
| H.17.14(as per cl H 17.4.16) |
- |
400 |
|
- |
| J 17.18.5(as per cl J 17.8.5) |
- |
400 |
|
- |
| J 17.18.5(as per cl J 17.8.6) |
- |
400 |
|
- |
| J 17.17.2(as per table 13.1) |
- |
400 |
|
- |
| J 17.17(As per table 13.2) |
- |
400 |
|
- |
| J. 17. 18.2(as per cl J. 17. 18.2) |
- |
400 |
|
- |
| J. 17. 18.3(as per cl J. 17. 18.3) |
- |
400 |
|
- |
| J. 17. 18.4(as per cl J. 17. 18.4) |
- |
400 |
|
- |
| 8(Test finger as shown in figure 2 with force 20 N/30 N) |
- |
400 |
|
- |
| 9(By inspection) |
- |
400 |
|
- |
| 9.1.1(By inspection) |
- |
400 |
|
- |
| 9.1.2(By inspection) |
- |
400 |
|
- |
| 9.1.3(By inspection) |
- |
400 |
|
- |
| 9.2(By inspection) |
- |
400 |
|
- |
| 9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V) |
- |
400 |
|
- |
| 9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.4(by inspection and by plating) |
- |
400 |
|
- |
| 9.4.1(by inspection) |
- |
400 |
|
- |
| 9.4.2(by inspection) |
- |
400 |
|
- |
| 9.5.1(by inspection) |
- |
400 |
|
- |
| 9.5.2(by inspection) |
- |
400 |
|
- |
| 10.1.1(By inspection and as per IEC 60988-2-2) |
- |
400 |
|
- |
| 10.1.1.1(By inspection and as per IEC 60988-2-2) |
- |
400 |
|
- |
| 10.1.2(By inspection ) |
- |
400 |
|
- |
| 10.1.3(By inspection ) |
- |
400 |
|
- |
| 10.1.4(by inspection, by measurement and by fitting conductors of the
smallest and largest cross-sectional areas specified or declared.) |
- |
400 |
|
- |
| 10.1.5(By measurement) |
- |
400 |
|
- |
| 10.1.5.1(by inspection, by measurement, by torque test) |
- |
400 |
|
- |
| 10.1.6(by inspection after cl 10.1.5) |
- |
400 |
|
- |
| 10.1.7(by inspection) |
- |
400 |
|
- |
| 10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.) |
- |
400 |
|
- |
| 10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction) |
- |
400 |
|
- |
| 10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.) |
- |
400 |
|
- |
| 10.1.11(By inspection) |
- |
400 |
|
- |
| 10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a
nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and
clamped in the terminal. The free wire is bent, without tearing the insulation back , in every
direction , but without making sharp bends around barriers.) |
- |
400 |
|
- |
| 10.1.13(By inspection and after the test of cl 17) |
- |
400 |
|
- |
| 10.1.14(By inspection) |
- |
400 |
|
- |
| 10.1.15(Figure 11 or 12) |
- |
400 |
|
- |
| 10.2(By inspection) |
- |
400 |
|
- |
| 10.2.1(Table 10.2.1) |
- |
400 |
|
- |
| 10.2.2(By inspection) |
- |
400 |
|
- |
| 10.2.3(By inspection) |
- |
400 |
|
- |
| 10.2.4.1(Figure 14 or 15) |
- |
400 |
|
- |
| 10.2.4.2(During the test of cl 14) |
- |
400 |
|
- |
| 10.2.4.3(As per table 10.2.4.3) |
- |
400 |
|
- |
| 10.2.4.4(As per Figure 16) |
- |
400 |
|
- |
| 11.1(By inspection) |
- |
400 |
|
- |
| 11.1.1(By inspection) |
- |
400 |
|
- |
| 11.1.2(by inspection and by analysis of the material) |
- |
400 |
|
- |
| 11.1.3(by inspection) |
- |
400 |
|
- |
| 11.2(by inspection and by test) |
- |
400 |
|
- |
| 11.2.2(by inspection, by measurement and/or by manual test) |
- |
400 |
|
- |
| 11.2.3(by inspection, by measurement and/or by manual test) |
- |
400 |
|
- |
| 11.2.3.2(by inspection, by measurement and/or by manual test) |
- |
400 |
|
- |
| 11.2.4(as per lEC 60227 or IEC 60245.) |
- |
400 |
|
- |
| 11.2.5(As per annexure H, cl 11.2.5) |
- |
400 |
|
- |
| 11.3.1(by inspection and by the tests of clauses 13 and 20) |
- |
400 |
|
- |
| 11.3.2(by inspection and by the tests of clauses 13) |
- |
400 |
|
- |
| 11.3.3(by inspection) |
- |
400 |
|
- |
| 11.3.4(by inspection) |
- |
400 |
|
- |
| 11.3.5(by inspection) |
- |
400 |
|
- |
| 11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. ) |
- |
400 |
|
- |
| 11.3.7(by inspection, and if necessary as per cl 11.3.7.2) |
- |
400 |
|
- |
| 11.3.8(by inspection) |
- |
400 |
|
- |
| 11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical) |
- |
400 |
|
- |
| 11.4.1 (by inspection) |
- |
400 |
|
- |
| 11.4.2(by inspection) |
- |
400 |
|
- |
| 11.4.3(by the tests of clauses 15 to 17) |
- |
400 |
|
- |
| 11.4.4 to 11.4.16(As per relevent type) |
- |
400 |
|
- |
| 11.5(by inspection) |
- |
400 |
|
- |
| 11.6.1(by inspection and by manual test) |
- |
400 |
|
- |
| 11.6.2(by inspection and by manual test) |
- |
400 |
|
- |
| 11.6.3.1(By inspection) |
- |
400 |
|
- |
| 11.6.3.2(By inspection) |
- |
400 |
|
- |
| 11.6.3.3(By inspection) |
- |
400 |
|
- |
| 11.6.3.4(By inspection) |
- |
400 |
|
- |
| 11.6.3.5(By inspection) |
- |
400 |
|
- |
| 11.6.3.6(By inspection) |
- |
400 |
|
- |
| 11.6.3.7(By inspection) |
- |
400 |
|
- |
| 11.7.1(By Flexing test as per fig 9) |
- |
400 |
|
- |
| 11.7.1.2.2(By Flexing test as per fig 9) |
- |
400 |
|
- |
| 11.7.1.2.3(By Flexing test as per fig 9) |
- |
400 |
|
- |
| 11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1) |
- |
400 |
|
- |
| 11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2) |
- |
400 |
|
- |
| 11.8(By inspection) |
- |
400 |
|
- |
| 11.8.1(By inspection) |
- |
400 |
|
- |
| 11.8.2(By inspection and as per table 11.8.2) |
- |
400 |
|
- |
| 11.8.3(by inspection and by connecting cords of the largest cross-sectional
eree used in 10.1.4) |
- |
400 |
|
- |
| 11.9.1(By inspection) |
- |
400 |
|
- |
| 11.9.1.1(by inspection and manual test) |
- |
400 |
|
- |
| 11.9.1.2(by inspection and manual test) |
- |
400 |
|
- |
| 11.9.1.3(by inspection and manual test) |
- |
400 |
|
- |
| 11.9.1.4(by inspection and manual test) |
- |
400 |
|
- |
| 11.10.1(by inspection) |
- |
400 |
|
- |
| 11.10.2(by inspection) |
- |
400 |
|
- |
| 11.10.3(by inspection and by test of socket-outlet system) |
- |
400 |
|
- |
| 11.11(Requirements during mounting, maintenance and servicing) |
- |
400 |
|
- |
| 11.11.1(By inspection) |
- |
400 |
|
- |
| 11.11.1.1(By inspection) |
- |
400 |
|
- |
| 11.11.1.2(By inspection) |
- |
400 |
|
- |
| 11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3) |
- |
400 |
|
- |
| 11.11.1.5.4(By inspection) |
- |
400 |
|
- |
| 11.11.1.5.6(by pull test) |
- |
400 |
|
- |
| 11.11.2(By inspection) |
- |
400 |
|
- |
| 11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
400 |
|
- |
| 11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
400 |
|
- |
| 11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
400 |
|
- |
| 11.11.4(By inspection) |
- |
400 |
|
- |
| 11.11.5(By inspection and by manual test) |
- |
400 |
|
- |
| 11.11.6(By inspection) |
- |
400 |
|
- |
| 11.11.7(By inspection) |
- |
400 |
|
- |
| 11.12(As per H, cl 11.12) |
- |
400 |
|
- |
| 11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. ) |
- |
400 |
|
- |
| 11.1.102(As per IEC 60216-1:2001) |
- |
400 |
|
- |
| 11.4.13.102(an impact tool is dropped once from a height of 0.60 m ) |
- |
0 |
|
- |
| 11.4.101(as per cl 11.4.101) |
- |
400 |
|
- |
| 11.4.103(table 7.2 item 103 and by the test of cl 17.15) |
- |
400 |
|
- |
| 11.4.107(As per annexure DD) |
- |
400 |
|
- |
| 11.6.3.101(As per table 7, item 117) |
- |
400 |
|
- |
| 11.101(As per annexure BB) |
- |
400 |
|
- |
| 12.1(As per IEC 60529) |
- |
400 |
|
- |
| 12.1.6.2(Torque test) |
- |
400 |
|
- |
| 12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C) |
- |
400 |
|
- |
| 12.3(as per cl 12.3.1 to 12.3.7) |
- |
400 |
|
- |
| 12.101(None) |
- |
400 |
|
- |
| 12.101.2(15 K+Tmax for 16 hr) |
- |
400 |
|
- |
| 12.101.5(as per 12.103 to 12.105) |
- |
400 |
|
- |
| 12.101.6(a voltage equal to (2
x VR) + 1 000 V is applied at rated frequency for 1 min ) |
- |
400 |
|
- |
| 13.1(as per table 13.1) |
- |
400 |
|
- |
| 13.2(As per table 13.2) |
- |
400 |
|
- |
| 13.3.1 to 13.3.4(as per clause 13.3.4) |
- |
400 |
|
- |
| 14.1(As per table 14.1) |
- |
400 |
|
- |
| 14.3(As per table 14.1) |
- |
400 |
|
- |
| 14.101.1( as per cl 14.102 and 14.102.1) |
- |
400 |
|
- |
| 15(as per cl 15.1 to 15.4) |
- |
400 |
|
- |
| 15.5(as per cl 15.5 to 15.6) |
- |
400 |
|
- |
| 15.6.4(42 of table 7.2, and as per annexure AA) |
- |
400 |
|
- |
| 15.7(as per annexure J, cl 15.7) |
- |
400 |
|
- |
| 15.5.3.101 to 15.5.3.105(According to type of control) |
- |
400 |
|
- |
| 15.5.3.109( voltage specified in Table 13.2) |
- |
400 |
|
- |
| 16.2(as per cl 16.2.1 to 16.2.3 ) |
- |
400 |
|
- |
| 16.2.4(test of cl 15 repeated ) |
- |
400 |
|
- |
| 16.2.4(42 of table 7.2) |
- |
400 |
|
- |
| 18.1.6(By inspection) |
- |
400 |
|
- |
| 18.1.6.1(By inspection) |
- |
400 |
|
- |
| 18.1.6.2(By inspection) |
- |
400 |
|
- |
| 18.1.6.3(Pull test as per cl 18.1.6.3) |
- |
400 |
|
- |
| 18.2(Impact tester) |
- |
400 |
|
- |
| 18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4) |
- |
400 |
|
- |
| 18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5) |
- |
400 |
|
- |
| 18.7(Pull test as per table 18.7) |
- |
400 |
|
- |
| 18.8(as per cl 18.8.2 and 18.8.3) |
- |
400 |
|
- |
| 18.9(axial pull of 15N/30N) |
- |
400 |
|
- |
| 18.101(as per cl 18.101.2 and 101.3) |
- |
400 |
|
- |
| 18.102(Hydrualic test) |
- |
400 |
|
- |
| 19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.2.1(By inspection) |
- |
400 |
|
- |
| 19.2.2(By inspection) |
- |
400 |
|
- |
| 19.2.3(By inspection) |
- |
400 |
|
- |
| 19.2.4(By inspection) |
- |
400 |
|
- |
| 19.2.4.1(By inspection) |
- |
400 |
|
- |
| 19.2.5(By inspection) |
- |
400 |
|
- |
| 19.2.5.1(By inspection) |
- |
400 |
|
- |
| 19.2.6(By inspection) |
- |
400 |
|
- |
| 20.1(as per table 20.2) |
- |
400 |
|
- |
| 20.2.1(as per table 20.3) |
- |
400 |
|
- |
| 20.2.2(as per table 20.4) |
- |
400 |
|
- |
| 21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5) |
- |
400 |
|
- |
| 21.2.7(As per cl G.4) |
- |
400 |
|
- |
| 22.1.1(As per cl 21.1.3 to 21.1.6) |
- |
400 |
|
- |
| 25(as per annexure H) |
- |
400 |
|
- |
| 27.1(as per annexure H) |
- |
400 |
|
- |
| 27.2(as per cl 27.2.1 and 27.2.2) |
- |
400 |
|
- |
| 27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .) |
- |
400 |
|
- |
| H 27.4(as per cl H 27.4.1 and H 27.4.2) |
- |
400 |
|
- |
| 10.1.7.1(by inspection) |
- |
400 |
|
- |
| 11.7.2.11 to 11.7.2.15(By measurement) |
- |
400 |
|
- |
| 5(By inspection) |
- |
400 |
|
- |
| 5.1(By inspection) |
- |
400 |
|
- |
| 5.2(By inspection) |
- |
400 |
|
- |
| 6.1(By inspection) |
- |
400 |
|
- |
| 6.2(By inspection) |
- |
400 |
|
- |
| 6.3(By inspection) |
- |
400 |
|
- |
| 6.4(By inspection) |
- |
400 |
|
- |
| 6.5(By inspection) |
- |
400 |
|
- |
| 6.5.1(IEC 60529 and by inspection) |
- |
400 |
|
- |
| 6.5.2(IEC 60529 and by inspection) |
- |
400 |
|
- |
| 6.5.3(Annexure N and by inspection) |
- |
400 |
|
- |
| 6.6(By inspection) |
- |
400 |
|
- |
| 6.7.1(By inspection) |
- |
400 |
|
- |
| 6.7.2(By inspection) |
- |
400 |
|
- |
| 6.8(By inspection) |
- |
400 |
|
- |
| 6.8.2(By inspection) |
- |
400 |
|
- |
| 6.9(Annexure H and by inspection) |
- |
400 |
|
- |
| 6.1(By inspection) |
- |
400 |
|
- |
| 6.11(By inspection) |
- |
400 |
|
- |
| 6.12(By inspection) |
- |
400 |
|
- |
| 6.13(By inspection) |
- |
400 |
|
- |
| 6.14(By inspection) |
- |
400 |
|
- |
| 6.15(Annexure J and by inspection) |
- |
400 |
|
- |
| 6.16(By inspection) |
- |
400 |
|
- |
| 6.18(Annexure H) |
- |
400 |
|
- |
| 6.17(Annexure H) |
- |
400 |
|
- |
| 6.4.3(By inspection) |
- |
400 |
|
- |
| H 17.1.4.2(as per cl H 17.1.4.2) |
- |
400 |
|
- |
| H.17.14(as per cl H 17.4.16) |
- |
400 |
|
- |
| J 17.18.5(as per cl J 17.8.5) |
- |
400 |
|
- |
| J 17.18.5(as per cl J 17.8.6) |
- |
400 |
|
- |
| J 17.17.2(as per table 13.1) |
- |
400 |
|
- |
| J 17.17(As per table 13.2) |
- |
400 |
|
- |
| J. 17. 18.2(as per cl J. 17. 18.2) |
- |
400 |
|
- |
| J. 17. 18.3(as per cl J. 17. 18.3) |
- |
400 |
|
- |
| J. 17. 18.4(as per cl J. 17. 18.4) |
- |
400 |
|
- |
| 21.2.2 to 21.2.6(as per annexure G) |
- |
400 |
|
- |
| 9(By inspection) |
- |
400 |
|
- |
| 9.1.1(By inspection) |
- |
400 |
|
- |
| 9.1.2(By inspection) |
- |
400 |
|
- |
| 9.1.3(By inspection) |
- |
400 |
|
- |
| 9.2(By inspection) |
- |
400 |
|
- |
| 9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V) |
- |
400 |
|
- |
| 9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.4(by inspection and by plating) |
- |
400 |
|
- |
| 9.4.1(by inspection) |
- |
400 |
|
- |
| 9.4.2(by inspection) |
- |
400 |
|
- |
| 9.5.1(by inspection) |
- |
400 |
|
- |
| 9.5.2(by inspection) |
- |
400 |
|
- |
| 10.1.1(By inspection and as per IEC 60988-2-2) |
- |
400 |
|
- |
| 10.1.1.1(By inspection and as per IEC 60988-2-2) |
- |
400 |
|
- |
| 10.1.2(By inspection ) |
- |
400 |
|
- |
| 10.1.3(By inspection ) |
- |
400 |
|
- |
| 10.1.4(by inspection, by measurement and by fitting conductors of the
smallest and largest cross-sectional areas specified or declared.) |
- |
400 |
|
- |
| 10.1.5(By measurement) |
- |
400 |
|
- |
| 10.1.5.1(by inspection, by measurement, by torque test) |
- |
400 |
|
- |
| 10.1.6(by inspection after cl 10.1.5) |
- |
400 |
|
- |
| 10.1.7(by inspection) |
- |
400 |
|
- |
| 10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.) |
- |
400 |
|
- |
| 10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction) |
- |
400 |
|
- |
| 10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.) |
- |
400 |
|
- |
| 10.1.11(By inspection) |
- |
400 |
|
- |
| 10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a
nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and
clamped in the terminal. The free wire is bent, without tearing the insulation back , in every
direction , but without making sharp bends around barriers.) |
- |
400 |
|
- |
| 10.1.13(By inspection and after the test of cl 17) |
- |
400 |
|
- |
| 10.1.14(By inspection) |
- |
400 |
|
- |
| 10.1.15(Figure 11 or 12) |
- |
400 |
|
- |
| 10.2(By inspection) |
- |
400 |
|
- |
| 10.2.1(Table 10.2.1) |
- |
400 |
|
- |
| 10.2.2(By inspection) |
- |
400 |
|
- |
| 10.2.3(By inspection) |
- |
400 |
|
- |
| 10.2.4.1(Figure 14 or 15) |
- |
400 |
|
- |
| 10.2.4.2(During the test of cl 14) |
- |
400 |
|
- |
| 10.2.4.3(As per table 10.2.4.3) |
- |
400 |
|
- |
| 10.2.4.4(As per Figure 16) |
- |
400 |
|
- |
| 11.1(By inspection) |
- |
400 |
|
- |
| 11.1.1(By inspection) |
- |
400 |
|
- |
| 11.1.2(by inspection and by analysis of the material) |
- |
400 |
|
- |
| 11.1.3(by inspection) |
- |
400 |
|
- |
| 11.2(by inspection and by test) |
- |
400 |
|
- |
| 11.2.2(by inspection, by measurement and/or by manual test) |
- |
400 |
|
- |
| 11.2.3(by inspection, by measurement and/or by manual test) |
- |
400 |
|
- |
| 11.2.3.2(by inspection, by measurement and/or by manual test) |
- |
400 |
|
- |
| 11.2.4(as per lEC 60227 or IEC 60245.) |
- |
400 |
|
- |
| 11.2.5(As per annexure H, cl 11.2.5) |
- |
400 |
|
- |
| 11.3.1(by inspection and by the tests of clauses 13 and 20) |
- |
400 |
|
- |
| 11.3.2(by inspection and by the tests of clauses 13) |
- |
400 |
|
- |
| 11.3.3(by inspection) |
- |
400 |
|
- |
| 11.3.4(by inspection) |
- |
400 |
|
- |
| 11.3.5(by inspection) |
- |
400 |
|
- |
| 11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. ) |
- |
400 |
|
- |
| 11.3.7(by inspection, and if necessary as per cl 11.3.7.2) |
- |
400 |
|
- |
| 11.3.8(by inspection) |
- |
400 |
|
- |
| 11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical) |
- |
400 |
|
- |
| 11.4.1 (by inspection) |
- |
400 |
|
- |
| 11.4.2(by inspection) |
- |
400 |
|
- |
| 11.4.3(by the tests of clauses 15 to 17) |
- |
400 |
|
- |
| 11.4.4 to 11.4.16(As per relevent type) |
- |
400 |
|
- |
| 11.5(by inspection) |
- |
400 |
|
- |
| 11.6.1(by inspection and by manual test) |
- |
400 |
|
- |
| 11.6.2(by inspection and by manual test) |
- |
400 |
|
- |
| 11.6.3.1(By inspection) |
- |
400 |
|
- |
| 11.6.3.2(By inspection) |
- |
400 |
|
- |
| 11.6.3.3(By inspection) |
- |
400 |
|
- |
| 11.6.3.4(By inspection) |
- |
400 |
|
- |
| 11.6.3.5(By inspection) |
- |
400 |
|
- |
| 11.6.3.6(By inspection) |
- |
400 |
|
- |
| 11.6.3.7(By inspection) |
- |
400 |
|
- |
| 11.7.1(By Flexing test as per fig 9) |
- |
400 |
|
- |
| 11.7.1.2.2(By Flexing test as per fig 9) |
- |
400 |
|
- |
| 11.7.1.2.3(By Flexing test as per fig 9) |
- |
400 |
|
- |
| 11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1) |
- |
400 |
|
- |
| 11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2) |
- |
400 |
|
- |
| 11.8(By inspection) |
- |
400 |
|
- |
| 11.8.1(By inspection) |
- |
400 |
|
- |
| 11.8.2(By inspection and as per table 11.8.2) |
- |
400 |
|
- |
| 11.8.3(by inspection and by connecting cords of the largest cross-sectional
eree used in 10.1.4) |
- |
400 |
|
- |
| 11.9.1(By inspection) |
- |
400 |
|
- |
| 11.9.1.1(by inspection and manual test) |
- |
400 |
|
- |
| 11.9.1.2(by inspection and manual test) |
- |
400 |
|
- |
| 11.9.1.3(by inspection and manual test) |
- |
400 |
|
- |
| 11.9.1.4(by inspection and manual test) |
- |
400 |
|
- |
| 11.10.1(by inspection) |
- |
400 |
|
- |
| 11.10.2(by inspection) |
- |
400 |
|
- |
| 11.10.3(by inspection and by test of socket-outlet system) |
- |
400 |
|
- |
| 11.11(Requirements during mounting, maintenance and servicing) |
- |
400 |
|
- |
| 11.11.1(By inspection) |
- |
400 |
|
- |
| 11.11.1.1(By inspection) |
- |
400 |
|
- |
| 11.11.1.2(By inspection) |
- |
400 |
|
- |
| 11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3) |
- |
400 |
|
- |
| 11.11.1.5.4(By inspection) |
- |
400 |
|
- |
| 11.11.1.5.6(by pull test) |
- |
400 |
|
- |
| 11.11.2(By inspection) |
- |
400 |
|
- |
| 11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
400 |
|
- |
| 11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
400 |
|
- |
| 11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
400 |
|
- |
| 11.11.4(By inspection) |
- |
400 |
|
- |
| 11.11.5(By inspection and by manual test) |
- |
400 |
|
- |
| 11.11.6(By inspection) |
- |
400 |
|
- |
| 11.11.7(By inspection) |
- |
400 |
|
- |
| 11.12(As per H, cl 11.12) |
- |
400 |
|
- |
| 11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. ) |
- |
400 |
|
- |
| 11.1.102(As per IEC 60216-1:2001) |
- |
400 |
|
- |
| 11.4.13.102(an impact tool is dropped once from a height of 0.60 m ) |
- |
400 |
|
- |
| 11.4.101(as per cl 11.4.101) |
- |
400 |
|
- |
| 11.4.103(table 7.2 item 103 and by the test of cl 17.15) |
- |
400 |
|
- |
| 11.4.107(As per annexure DD) |
- |
400 |
|
- |
| 11.6.3.101(As per table 7, item 117) |
- |
400 |
|
- |
| 11.101(As per annexure BB) |
- |
400 |
|
- |
| 12.1(As per IEC 60529) |
- |
400 |
|
- |
| 12.1.6.2(Torque test) |
- |
400 |
|
- |
| 12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C) |
- |
400 |
|
- |
| 12.3(as per cl 12.3.1 to 12.3.7) |
- |
400 |
|
- |
| 12.101(None) |
- |
400 |
|
- |
| 12.101.2(15 K+Tmax for 16 hr) |
- |
400 |
|
- |
| 12.101.5(as per 12.103 to 12.105) |
- |
400 |
|
- |
| 12.101.6(a voltage equal to (2
x VR) + 1 000 V is applied at rated frequency for 1 min ) |
- |
400 |
|
- |
| 13.1(as per table 13.1) |
- |
400 |
|
- |
| 13.2(As per table 13.2) |
- |
400 |
|
- |
| 13.3.1 to 13.3.4(as per clause 13.3.4) |
- |
400 |
|
- |
| 14.1(As per table 14.1) |
- |
400 |
|
- |
| 14.3(As per table 14.1) |
- |
400 |
|
- |
| 14.101.1( as per cl 14.102 and 14.102.1) |
- |
400 |
|
- |
| 15(as per cl 15.1 to 15.4) |
- |
400 |
|
- |
| 15.5(as per cl 15.5 to 15.6) |
- |
400 |
|
- |
| 15.6.4(42 of table 7.2, and as per annexure AA) |
- |
400 |
|
- |
| 15.7(as per annexure J, cl 15.7) |
- |
400 |
|
- |
| 15.5.3.101 to 15.5.3.105(According to type of control) |
- |
400 |
|
- |
| 15.5.3.109( voltage specified in Table 13.2) |
- |
400 |
|
- |
| 16.2(as per cl 16.2.1 to 16.2.3 ) |
- |
400 |
|
- |
| 16.2.4(test of cl 15 repeated ) |
- |
400 |
|
- |
| 16.2.4(42 of table 7.2) |
- |
400 |
|
- |
| 18.1.6(By inspection) |
- |
400 |
|
- |
| 18.1.6.1(By inspection) |
- |
400 |
|
- |
| 18.1.6.2(By inspection) |
- |
400 |
|
- |
| 18.1.6.3(Pull test as per cl 18.1.6.3) |
- |
400 |
|
- |
| 18.2(Impact tester) |
- |
400 |
|
- |
| 18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4) |
- |
400 |
|
- |
| 18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5) |
- |
400 |
|
- |
| 18.7(Pull test as per table 18.7) |
- |
400 |
|
- |
| 18.8(as per cl 18.8.2 and 18.8.3) |
- |
400 |
|
- |
| 18.9(axial pull of 15N/30N) |
- |
400 |
|
- |
| 18.101(as per cl 18.101.2 and 101.3) |
- |
400 |
|
- |
| 18.102(Hydrualic test) |
- |
400 |
|
- |
| 19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.2.1(By inspection) |
- |
400 |
|
- |
| 19.2.2(By inspection) |
- |
400 |
|
- |
| 19.2.3(By inspection) |
- |
400 |
|
- |
| 19.2.4(By inspection) |
- |
400 |
|
- |
| 19.2.4.1(By inspection) |
- |
400 |
|
- |
| 19.2.5(By inspection) |
- |
400 |
|
- |
| 19.2.5.1(By inspection) |
- |
400 |
|
- |
| 19.2.6(By inspection) |
- |
400 |
|
- |
| 20.1(as per table 20.2) |
- |
400 |
|
- |
| 20.2.1(as per table 20.3) |
- |
400 |
|
- |
| 20.2.2(as per table 20.4) |
- |
400 |
|
- |
| 21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5) |
- |
400 |
|
- |
| 21.2.7(As per cl G.4) |
- |
400 |
|
- |
| 22.1.1(As per cl 21.1.3 to 21.1.6) |
- |
400 |
|
- |
| 25(as per annexure H) |
- |
400 |
|
- |
| 27.1(as per annexure H) |
- |
400 |
|
- |
| 27.2(as per cl 27.2.1 and 27.2.2) |
- |
400 |
|
- |
| 27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .) |
- |
400 |
|
- |
| H 27.4(as per cl H 27.4.1 and H 27.4.2) |
- |
400 |
|
- |
| 10.1.7.1(by inspection) |
- |
400 |
|
- |
| 11.7.2.11 to 11.7.2.15(By measurement) |
- |
400 |
|
- |
| 5(By inspection) |
- |
400 |
|
- |
| 5.1(By inspection) |
- |
400 |
|
- |
| 5.2(By inspection) |
- |
400 |
|
- |
| 6.1(By inspection) |
- |
400 |
|
- |
| 6.2(By inspection) |
- |
400 |
|
- |
| 6.3(By inspection) |
- |
400 |
|
- |
| 6.4(By inspection) |
- |
400 |
|
- |
| 6.5(By inspection) |
- |
400 |
|
- |
| 6.5.1(IEC 60529 and by inspection) |
- |
400 |
|
- |
| 6.5.2(IEC 60529 and by inspection) |
- |
400 |
|
- |
| 6.5.3(Annexure N and by inspection) |
- |
400 |
|
- |
| 6.6(By inspection) |
- |
400 |
|
- |
| 6.7.1(By inspection) |
- |
400 |
|
- |
| 6.7.2(By inspection) |
- |
400 |
|
- |
| 6.8(By inspection) |
- |
400 |
|
- |
| 6.8.2(By inspection) |
- |
400 |
|
- |
| 6.9(Annexure H and by inspection) |
- |
400 |
|
- |
| 6.1(By inspection) |
- |
400 |
|
- |
| 6.11(By inspection) |
- |
400 |
|
- |
| 6.12(By inspection) |
- |
400 |
|
- |
| 6.13(By inspection) |
- |
400 |
|
- |
| 6.14(By inspection) |
- |
400 |
|
- |
| 6.15(Annexure J and by inspection) |
- |
400 |
|
- |
| 6.16(By inspection) |
- |
400 |
|
- |
| 6.18(Annexure H) |
- |
400 |
|
- |
| 6.17(Annexure H) |
- |
400 |
|
- |
| 6.4.3(By inspection) |
- |
400 |
|
- |
| H 17.1.4.2(as per cl H 17.1.4.2) |
- |
400 |
|
- |
| H.17.14(as per cl H 17.4.16) |
- |
400 |
|
- |
| J 17.18.5(as per cl J 17.8.5) |
- |
400 |
|
- |
| J 17.18.5(as per cl J 17.8.6) |
- |
400 |
|
- |
| J 17.17.2(as per table 13.1) |
- |
400 |
|
- |
| J 17.17(As per table 13.2) |
- |
400 |
|
- |
| J. 17. 18.2(as per cl J. 17. 18.2) |
- |
400 |
|
- |
| J. 17. 18.3(as per cl J. 17. 18.3) |
- |
400 |
|
- |
| J. 17. 18.4(as per cl J. 17. 18.4) |
- |
400 |
|
- |
| 21.2.2 to 21.2.6(as per annexure G) |
- |
400 |
|
- |
| 9(By inspection) |
- |
400 |
|
- |
| 9.1.1(By inspection) |
- |
400 |
|
- |
| 9.1.2(By inspection) |
- |
400 |
|
- |
| 9.1.3(By inspection) |
- |
400 |
|
- |
| 9.2(By inspection) |
- |
400 |
|
- |
| 9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V) |
- |
400 |
|
- |
| 9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
400 |
|
- |
| 9.4(by inspection and by plating) |
- |
400 |
|
- |
| 9.4.1(by inspection) |
- |
400 |
|
- |
| 9.4.2(by inspection) |
- |
400 |
|
- |
| 9.5.1(by inspection) |
- |
400 |
|
- |
| 9.5.2(by inspection) |
- |
400 |
|
- |
| 10.1.1(By inspection and as per IEC 60988-2-2) |
- |
400 |
|
- |
| 10.1.1.1(By inspection and as per IEC 60988-2-2) |
- |
400 |
|
- |
| 10.1.2(By inspection ) |
- |
400 |
|
- |
| 10.1.3(By inspection ) |
- |
400 |
|
- |
| 10.1.4(by inspection, by measurement and by fitting conductors of the
smallest and largest cross-sectional areas specified or declared.) |
- |
400 |
|
- |
| 10.1.5(By measurement) |
- |
400 |
|
- |
| 10.1.5.1(by inspection, by measurement, by torque test) |
- |
400 |
|
- |
| 10.1.6(by inspection after cl 10.1.5) |
- |
400 |
|
- |
| 10.1.7(by inspection) |
- |
400 |
|
- |
| 10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.) |
- |
400 |
|
- |
| 10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction) |
- |
400 |
|
- |
| 10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.) |
- |
400 |
|
- |
| 10.1.11(By inspection) |
- |
400 |
|
- |
| 10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a
nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and
clamped in the terminal. The free wire is bent, without tearing the insulation back , in every
direction , but without making sharp bends around barriers.) |
- |
400 |
|
- |
| 10.1.13(By inspection and after the test of cl 17) |
- |
400 |
|
- |
| 10.1.14(By inspection) |
- |
400 |
|
- |
| 10.1.15(Figure 11 or 12) |
- |
400 |
|
- |
| 10.2(By inspection) |
- |
400 |
|
- |
| 10.2.1(Table 10.2.1) |
- |
400 |
|
- |
| 10.2.2(By inspection) |
- |
400 |
|
- |
| 10.2.3(By inspection) |
- |
400 |
|
- |
| 10.2.4.1(Figure 14 or 15) |
- |
400 |
|
- |
| 10.2.4.2(During the test of cl 14) |
- |
400 |
|
- |
| 10.2.4.3(As per table 10.2.4.3) |
- |
400 |
|
- |
| 10.2.4.4(As per Figure 16) |
- |
400 |
|
- |
| 11.1(By inspection) |
- |
400 |
|
- |
| 11.1.1(By inspection) |
- |
400 |
|
- |
| 11.1.2(by inspection and by analysis of the material) |
- |
400 |
|
- |
| 11.1.3(by inspection) |
- |
400 |
|
- |
| 11.2(by inspection and by test) |
- |
400 |
|
- |
| 11.2.2(by inspection, by measurement and/or by manual test) |
- |
400 |
|
- |
| 11.2.3(by inspection, by measurement and/or by manual test) |
- |
400 |
|
- |
| 11.2.3.2(by inspection, by measurement and/or by manual test) |
- |
400 |
|
- |
| 11.2.4(as per lEC 60227 or IEC 60245.) |
- |
400 |
|
- |
| 11.2.5(As per annexure H, cl 11.2.5) |
- |
400 |
|
- |
| 11.3.1(by inspection and by the tests of clauses 13 and 20) |
- |
400 |
|
- |
| 11.3.2(by inspection and by the tests of clauses 13) |
- |
400 |
|
- |
| 11.3.3(by inspection) |
- |
400 |
|
- |
| 11.3.4(by inspection) |
- |
400 |
|
- |
| 11.3.5(by inspection) |
- |
400 |
|
- |
| 11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. ) |
- |
400 |
|
- |
| 11.3.7(by inspection, and if necessary as per cl 11.3.7.2) |
- |
400 |
|
- |
| 11.3.8(by inspection) |
- |
400 |
|
- |
| 11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical) |
- |
400 |
|
- |
| 11.4.1 (by inspection) |
- |
400 |
|
- |
| 11.4.2(by inspection) |
- |
400 |
|
- |
| 11.4.3(by the tests of clauses 15 to 17) |
- |
400 |
|
- |
| 11.4.4 to 11.4.16(As per relevent type) |
- |
400 |
|
- |
| 11.5(by inspection) |
- |
400 |
|
- |
| 11.6.1(by inspection and by manual test) |
- |
400 |
|
- |
| 11.6.2(by inspection and by manual test) |
- |
400 |
|
- |
| 11.6.3.1(By inspection) |
- |
400 |
|
- |
| 11.6.3.2(By inspection) |
- |
400 |
|
- |
| 11.6.3.3(By inspection) |
- |
400 |
|
- |
| 11.6.3.4(By inspection) |
- |
400 |
|
- |
| 11.6.3.5(By inspection) |
- |
400 |
|
- |
| 11.6.3.6(By inspection) |
- |
400 |
|
- |
| 11.6.3.7(By inspection) |
- |
400 |
|
- |
| 11.7.1(By Flexing test as per fig 9) |
- |
400 |
|
- |
| 11.7.1.2.2(By Flexing test as per fig 9) |
- |
400 |
|
- |
| 11.7.1.2.3(By Flexing test as per fig 9) |
- |
400 |
|
- |
| 11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1) |
- |
400 |
|
- |
| 11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2) |
- |
400 |
|
- |
| 11.8(By inspection) |
- |
400 |
|
- |
| 11.8.1(By inspection) |
- |
400 |
|
- |
| 11.8.2(By inspection and as per table 11.8.2) |
- |
400 |
|
- |
| 11.8.3(by inspection and by connecting cords of the largest cross-sectional
eree used in 10.1.4) |
- |
400 |
|
- |
| 11.9.1(By inspection) |
- |
400 |
|
- |
| 11.9.1.1(by inspection and manual test) |
- |
400 |
|
- |
| 11.9.1.2(by inspection and manual test) |
- |
400 |
|
- |
| 11.9.1.3(by inspection and manual test) |
- |
400 |
|
- |
| 11.9.1.4(by inspection and manual test) |
- |
400 |
|
- |
| 11.10.1(by inspection) |
- |
400 |
|
- |
| 11.10.2(by inspection) |
- |
400 |
|
- |
| 11.10.3(by inspection and by test of socket-outlet system) |
- |
400 |
|
- |
| 11.11(Requirements during mounting, maintenance and servicing) |
- |
400 |
|
- |
| 11.11.1(By inspection) |
- |
400 |
|
- |
| 11.11.1.1(By inspection) |
- |
400 |
|
- |
| 11.11.1.2(By inspection) |
- |
400 |
|
- |
| 11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3) |
- |
400 |
|
- |
| 11.11.1.5.4(By inspection) |
- |
400 |
|
- |
| 11.11.1.5.6(by pull test) |
- |
400 |
|
- |
| 11.11.2(By inspection) |
- |
400 |
|
- |
| 11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
400 |
|
- |
| 11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
400 |
|
- |
| 11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
400 |
|
- |
| 11.11.4(By inspection) |
- |
400 |
|
- |
| 11.11.5(By inspection and by manual test) |
- |
400 |
|
- |
| 11.11.6(By inspection) |
- |
400 |
|
- |
| 11.11.7(By inspection) |
- |
400 |
|
- |
| 11.12(As per H, cl 11.12) |
- |
400 |
|
- |
| 11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. ) |
- |
400 |
|
- |
| 11.1.102(As per IEC 60216-1:2001) |
- |
400 |
|
- |
| 11.4.13.102(an impact tool is dropped once from a height of 0.60 m ) |
- |
400 |
|
- |
| 11.4.101(as per cl 11.4.101) |
- |
400 |
|
- |
| 11.4.103(table 7.2 item 103 and by the test of cl 17.15) |
- |
400 |
|
- |
| 11.4.107(As per annexure DD) |
- |
400 |
|
- |
| 11.6.3.101(As per table 7, item 117) |
- |
400 |
|
- |
| 11.101(As per annexure BB) |
- |
400 |
|
- |
| 12.1(As per IEC 60529) |
- |
400 |
|
- |
| 12.1.6.2(Torque test) |
- |
400 |
|
- |
| 12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C) |
- |
400 |
|
- |
| 12.3(as per cl 12.3.1 to 12.3.7) |
- |
400 |
|
- |
| 12.101(None) |
- |
400 |
|
- |
| 12.101.2(15 K+Tmax for 16 hr) |
- |
400 |
|
- |
| 12.101.5(as per 12.103 to 12.105) |
- |
400 |
|
- |
| 12.101.6(a voltage equal to (2
x VR) + 1 000 V is applied at rated frequency for 1 min ) |
- |
400 |
|
- |
| 13.1(as per table 13.1) |
- |
400 |
|
- |
| 13.2(As per table 13.2) |
- |
400 |
|
- |
| 13.3.1 to 13.3.4(as per clause 13.3.4) |
- |
400 |
|
- |
| 14.1(As per table 14.1) |
- |
400 |
|
- |
| 14.3(As per table 14.1) |
- |
400 |
|
- |
| 14.101.1( as per cl 14.102 and 14.102.1) |
- |
400 |
|
- |
| 15(as per cl 15.1 to 15.4) |
- |
400 |
|
- |
| 15.5(as per cl 15.5 to 15.6) |
- |
400 |
|
- |
| 15.6.4(42 of table 7.2, and as per annexure AA) |
- |
400 |
|
- |
| 15.7(as per annexure J, cl 15.7) |
- |
400 |
|
- |
| 15.5.3.101 to 15.5.3.105(According to type of control) |
- |
400 |
|
- |
| 15.5.3.109( voltage specified in Table 13.2) |
- |
400 |
|
- |
| 16.2(as per cl 16.2.1 to 16.2.3 ) |
- |
400 |
|
- |
| 16.2.4(test of cl 15 repeated ) |
- |
400 |
|
- |
| 16.2.4(42 of table 7.2) |
- |
400 |
|
- |
| 18.1.6(By inspection) |
- |
400 |
|
- |
| 18.1.6.1(By inspection) |
- |
400 |
|
- |
| 18.1.6.2(By inspection) |
- |
400 |
|
- |
| 18.1.6.3(Pull test as per cl 18.1.6.3) |
- |
400 |
|
- |
| 18.2(Impact tester) |
- |
400 |
|
- |
| 18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4) |
- |
400 |
|
- |
| 18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5) |
- |
400 |
|
- |
| 18.7(Pull test as per table 18.7) |
- |
400 |
|
- |
| 18.8(as per cl 18.8.2 and 18.8.3) |
- |
400 |
|
- |
| 18.9(axial pull of 15N/30N) |
- |
400 |
|
- |
| 18.101(as per cl 18.101.2 and 101.3) |
- |
400 |
|
- |
| 18.102(Hydrualic test) |
- |
400 |
|
- |
| 19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
400 |
|
- |
| 19.2.1(By inspection) |
- |
400 |
|
- |
| 19.2.2(By inspection) |
- |
400 |
|
- |
| 19.2.3(By inspection) |
- |
400 |
|
- |
| 19.2.4(By inspection) |
- |
400 |
|
- |
| 19.2.4.1(By inspection) |
- |
400 |
|
- |
| 19.2.5(By inspection) |
- |
400 |
|
- |
| 19.2.5.1(By inspection) |
- |
400 |
|
- |
| 19.2.6(By inspection) |
- |
400 |
|
- |
| 20.1(as per table 20.2) |
- |
400 |
|
- |
| 20.2.1(as per table 20.3) |
- |
400 |
|
- |
| 20.2.2(as per table 20.4) |
- |
400 |
|
- |
| 21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5) |
- |
400 |
|
- |
| 21.2.7(As per cl G.4) |
- |
400 |
|
- |
| 22.1.1(As per cl 21.1.3 to 21.1.6) |
- |
400 |
|
- |
| 25(as per annexure H) |
- |
400 |
|
- |
| 27.1(as per annexure H) |
- |
400 |
|
- |
| 27.2(as per cl 27.2.1 and 27.2.2) |
- |
400 |
|
- |
| 27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .) |
- |
400 |
|
- |
| H 27.4(as per cl H 27.4.1 and H 27.4.2) |
- |
400 |
|
- |
| 10.1.7.1(by inspection) |
- |
400 |
|
- |
| 11.7.2.11 to 11.7.2.15(By measurement) |
- |
400 |
|
- |
| 5(By inspection) |
- |
400 |
|
- |
| 5.1(By inspection) |
- |
400 |
|
- |
| 5.2(By inspection) |
- |
400 |
|
- |
| 6.1(By inspection) |
- |
400 |
|
- |
| 6.2(By inspection) |
- |
400 |
|
- |
| 6.3(By inspection) |
- |
400 |
|
- |
| 6.4(By inspection) |
- |
400 |
|
- |
| 6.5(By inspection) |
- |
400 |
|
- |
| 6.5.1(IEC 60529 and by inspection) |
- |
400 |
|
- |
| 6.5.2(IEC 60529 and by inspection) |
- |
400 |
|
- |
| 6.5.3(Annexure N and by inspection) |
- |
400 |
|
- |
| 6.6(By inspection) |
- |
400 |
|
- |
| 6.7.1(By inspection) |
- |
400 |
|
- |
| 6.7.2(By inspection) |
- |
400 |
|
- |
| 6.8(By inspection) |
- |
400 |
|
- |
| 6.8.2(By inspection) |
- |
400 |
|
- |
| 6.9(Annexure H and by inspection) |
- |
400 |
|
- |
| 6.1(By inspection) |
- |
400 |
|
- |
| 6.11(By inspection) |
- |
400 |
|
- |
| 6.12(By inspection) |
- |
400 |
|
- |
| 6.13(By inspection) |
- |
400 |
|
- |
| 6.14(By inspection) |
- |
400 |
|
- |
| 6.15(Annexure J and by inspection) |
- |
400 |
|
- |
| 6.16(By inspection) |
- |
400 |
|
- |
| 6.18(Annexure H) |
- |
400 |
|
- |
| 6.17(Annexure H) |
- |
400 |
|
- |
| 6.4.3(By inspection) |
- |
400 |
|
- |
| H 17.1.4.2(as per cl H 17.1.4.2) |
- |
400 |
|
- |
| H.17.14(as per cl H 17.4.16) |
- |
400 |
|
- |
| J 17.18.5(as per cl J 17.8.5) |
- |
400 |
|
- |
| J 17.18.5(as per cl J 17.8.6) |
- |
400 |
|
- |
| J 17.17.2(as per table 13.1) |
- |
400 |
|
- |
| J 17.17(As per table 13.2) |
- |
400 |
|
- |
| J. 17. 18.2(as per cl J. 17. 18.2) |
- |
400 |
|
- |
| J. 17. 18.3(as per cl J. 17. 18.3) |
- |
400 |
|
- |
| J. 17. 18.4(as per cl J. 17. 18.4) |
- |
400 |
|
- |
| 8(Test finger as shown in figure 2 with force 20 N/30 N) |
- |
400 |
|
- |
| 17.1(by the tests of 17.1.3 as indicated in 17.16) |
- |
400 |
|
- |
| 17.6(as per cl 17.6.1 and 17.6.2) |
- |
400 |
|
- |
| 17.7(as per cl 17.7.1 to 17.7.7) |
- |
400 |
|
- |
| 17.8(as per cl 17.8.1 to 17.8.4.1) |
- |
400 |
|
- |
| 17.9(as per cl 17.9.1 to 17.9.4) |
- |
400 |
|
- |
| 17.1(as per cl 17.10.1 to 17.10.4) |
- |
400 |
|
- |
| 17.11(as per cl 17.11.1 to 17.11.4) |
- |
400 |
|
- |
| 17.12(as per cl 17.12.1 to 17.12.5) |
- |
400 |
|
- |
| 17.13(as per cl 17.13.1 to 17.13.4) |
- |
400 |
|
- |
| 17.15.2(as per cl 17.15.2 and 17.15.2.3) |
- |
400 |
|
- |
| 17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C) |
- |
400 |
|
- |
| 17.16.107( 250 thermal cycles.) |
- |
400 |
|
- |
| 17.16.108( 7 h at a temperature of –20 C (or lower, if declared)) |
- |
400 |
|
- |
| 17.101.1(as per cl 17.101.1 to 17.105) |
- |
400 |
|
- |
| 21.2.2 to 21.2.6(as per annexure G) |
- |
- |
|
- |
| 9(By inspection) |
- |
- |
|
- |
| 9.1.1(By inspection) |
- |
- |
|
- |
| 9.1.2(By inspection) |
- |
- |
|
- |
| 9.1.3(By inspection) |
- |
- |
|
- |
| 9.2(By inspection) |
- |
- |
|
- |
| 9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V) |
- |
- |
|
- |
| 9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
- |
|
- |
| 9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
- |
|
- |
| 9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
- |
|
- |
| 9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1) |
- |
- |
|
- |
| 9.4(by inspection and by plating) |
- |
- |
|
- |
| 9.4.1(by inspection) |
- |
- |
|
- |
| 9.4.2(by inspection) |
- |
- |
|
- |
| 9.5.1(by inspection) |
- |
- |
|
- |
| 9.5.2(by inspection) |
- |
- |
|
- |
| 10.1.1(By inspection and as per IEC 60988-2-2) |
- |
- |
|
- |
| 10.1.1.1(By inspection and as per IEC 60988-2-2) |
- |
- |
|
- |
| 10.1.2(By inspection ) |
- |
- |
|
- |
| 10.1.3(By inspection ) |
- |
- |
|
- |
| 10.1.4(by inspection, by measurement and by fitting conductors of the
smallest and largest cross-sectional areas specified or declared.) |
- |
- |
|
- |
| 10.1.5(By measurement) |
- |
- |
|
- |
| 10.1.5.1(by inspection, by measurement, by torque test) |
- |
- |
|
- |
| 10.1.6(by inspection after cl 10.1.5) |
- |
- |
|
- |
| 10.1.7(by inspection) |
- |
- |
|
- |
| 10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.) |
- |
- |
|
- |
| 10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction) |
- |
- |
|
- |
| 10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.) |
- |
- |
|
- |
| 10.1.11(By inspection) |
- |
- |
|
- |
| 10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a
nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and
clamped in the terminal. The free wire is bent, without tearing the insulation back , in every
direction , but without making sharp bends around barriers.) |
- |
- |
|
- |
| 10.1.13(By inspection and after the test of cl 17) |
- |
- |
|
- |
| 10.1.14(By inspection) |
- |
- |
|
- |
| 10.1.15(Figure 11 or 12) |
- |
- |
|
- |
| 10.2(By inspection) |
- |
- |
|
- |
| 10.2.1(Table 10.2.1) |
- |
- |
|
- |
| 10.2.2(By inspection) |
- |
- |
|
- |
| 10.2.3(By inspection) |
- |
- |
|
- |
| 10.2.4.1(Figure 14 or 15) |
- |
- |
|
- |
| 10.2.4.2(During the test of cl 14) |
- |
- |
|
- |
| 10.2.4.3(As per table 10.2.4.3) |
- |
- |
|
- |
| 10.2.4.4(As per Figure 16) |
- |
- |
|
- |
| 11.1(By inspection) |
- |
- |
|
- |
| 11.1.1(By inspection) |
- |
- |
|
- |
| 11.1.2(by inspection and by analysis of the material) |
- |
- |
|
- |
| 11.1.3(by inspection) |
- |
- |
|
- |
| 11.2(by inspection and by test) |
- |
- |
|
- |
| 11.2.2(by inspection, by measurement and/or by manual test) |
- |
- |
|
- |
| 11.2.3(by inspection, by measurement and/or by manual test) |
- |
- |
|
- |
| 11.2.3.2(by inspection, by measurement and/or by manual test) |
- |
- |
|
- |
| 11.2.4(as per lEC 60227 or IEC 60245.) |
- |
- |
|
- |
| 11.2.5(As per annexure H, cl 11.2.5) |
- |
- |
|
- |
| 11.3.1(by inspection and by the tests of clauses 13 and 20) |
- |
- |
|
- |
| 11.3.2(by inspection and by the tests of clauses 13) |
- |
- |
|
- |
| 11.3.3(by inspection) |
- |
- |
|
- |
| 11.3.4(by inspection) |
- |
- |
|
- |
| 11.3.5(by inspection) |
- |
- |
|
- |
| 11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. ) |
- |
- |
|
- |
| 11.3.7(by inspection, and if necessary as per cl 11.3.7.2) |
- |
- |
|
- |
| 11.3.8(by inspection) |
- |
- |
|
- |
| 11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical) |
- |
- |
|
- |
| 11.4.1 (by inspection) |
- |
- |
|
- |
| 11.4.2(by inspection) |
- |
- |
|
- |
| 11.4.3(by the tests of clauses 15 to 17) |
- |
- |
|
- |
| 11.4.4 to 11.4.16(As per relevent type) |
- |
- |
|
- |
| 11.5(by inspection) |
- |
- |
|
- |
| 11.6.1(by inspection and by manual test) |
- |
- |
|
- |
| 11.6.2(by inspection and by manual test) |
- |
- |
|
- |
| 11.6.3.1(By inspection) |
- |
- |
|
- |
| 11.6.3.2(By inspection) |
- |
- |
|
- |
| 11.6.3.3(By inspection) |
- |
- |
|
- |
| 11.6.3.4(By inspection) |
- |
- |
|
- |
| 11.6.3.5(By inspection) |
- |
- |
|
- |
| 11.6.3.6(By inspection) |
- |
- |
|
- |
| 11.6.3.7(By inspection) |
- |
- |
|
- |
| 11.7.1(By Flexing test as per fig 9) |
- |
- |
|
- |
| 11.7.1.2.2(By Flexing test as per fig 9) |
- |
- |
|
- |
| 11.7.1.2.3(By Flexing test as per fig 9) |
- |
- |
|
- |
| 11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1) |
- |
- |
|
- |
| 11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2) |
- |
- |
|
- |
| 11.8(By inspection) |
- |
- |
|
- |
| 11.8.1(By inspection) |
- |
- |
|
- |
| 11.8.2(By inspection and as per table 11.8.2) |
- |
- |
|
- |
| 11.8.3(by inspection and by connecting cords of the largest cross-sectional
eree used in 10.1.4) |
- |
- |
|
- |
| 11.9.1(By inspection) |
- |
- |
|
- |
| 11.9.1.1(by inspection and manual test) |
- |
- |
|
- |
| 11.9.1.2(by inspection and manual test) |
- |
- |
|
- |
| 11.9.1.3(by inspection and manual test) |
- |
- |
|
- |
| 11.9.1.4(by inspection and manual test) |
- |
- |
|
- |
| 11.10.1(by inspection) |
- |
- |
|
- |
| 11.10.2(by inspection) |
- |
- |
|
- |
| 11.10.3(by inspection and by test of socket-outlet system) |
- |
- |
|
- |
| 11.11(Requirements during mounting, maintenance and servicing) |
- |
- |
|
- |
| 11.11.1(By inspection) |
- |
- |
|
- |
| 11.11.1.1(By inspection) |
- |
- |
|
- |
| 11.11.1.2(By inspection) |
- |
- |
|
- |
| 11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3) |
- |
- |
|
- |
| 11.11.1.5.4(By inspection) |
- |
- |
|
- |
| 11.11.1.5.6(by pull test) |
- |
- |
|
- |
| 11.11.2(By inspection) |
- |
- |
|
- |
| 11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
- |
|
- |
| 11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
- |
|
- |
| 11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9) |
- |
- |
|
- |
| 11.11.4(By inspection) |
- |
- |
|
- |
| 11.11.5(By inspection and by manual test) |
- |
- |
|
- |
| 11.11.6(By inspection) |
- |
- |
|
- |
| 11.11.7(By inspection) |
- |
- |
|
- |
| 11.12(As per H, cl 11.12) |
- |
- |
|
- |
| 11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. ) |
- |
- |
|
- |
| 11.1.102(As per IEC 60216-1:2001) |
- |
- |
|
- |
| 11.4.13.102(an impact tool is dropped once from a height of 0.60 m ) |
- |
- |
|
- |
| 11.4.101(as per cl 11.4.101) |
- |
- |
|
- |
| 11.4.103(table 7.2 item 103 and by the test of cl 17.15) |
- |
- |
|
- |
| 11.4.107(As per annexure DD) |
- |
- |
|
- |
| 11.6.3.101(As per table 7, item 117) |
- |
- |
|
- |
| 11.101(As per annexure BB) |
- |
- |
|
- |
| 12.1(As per IEC 60529) |
- |
- |
|
- |
| 12.1.6.2(Torque test) |
- |
- |
|
- |
| 12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C) |
- |
- |
|
- |
| 12.3(as per cl 12.3.1 to 12.3.7) |
- |
- |
|
- |
| 12.101(None) |
- |
- |
|
- |
| 12.101.2(15 K+Tmax for 16 hr) |
- |
- |
|
- |
| 12.101.5(as per 12.103 to 12.105) |
- |
- |
|
- |
| 12.101.6(a voltage equal to (2
x VR) + 1 000 V is applied at rated frequency for 1 min ) |
- |
- |
|
- |
| 13.1(as per table 13.1) |
- |
- |
|
- |
| 13.2(As per table 13.2) |
- |
- |
|
- |
| 13.3.1 to 13.3.4(as per clause 13.3.4) |
- |
- |
|
- |
| 14.1(As per table 14.1) |
- |
- |
|
- |
| 14.3(As per table 14.1) |
- |
- |
|
- |
| 14.101.1( as per cl 14.102 and 14.102.1) |
- |
- |
|
- |
| 15(as per cl 15.1 to 15.4) |
- |
- |
|
- |
| 15.5(as per cl 15.5 to 15.6) |
- |
- |
|
- |
| 15.6.4(42 of table 7.2, and as per annexure AA) |
- |
- |
|
- |
| 15.7(as per annexure J, cl 15.7) |
- |
- |
|
- |
| 15.5.3.101 to 15.5.3.105(According to type of control) |
- |
- |
|
- |
| 15.5.3.109( voltage specified in Table 13.2) |
- |
- |
|
- |
| 16.2(as per cl 16.2.1 to 16.2.3 ) |
- |
- |
|
- |
| 16.2.4(test of cl 15 repeated ) |
- |
- |
|
- |
| 16.2.4(42 of table 7.2) |
- |
- |
|
- |
| 18.1.6(By inspection) |
- |
- |
|
- |
| 18.1.6.1(By inspection) |
- |
- |
|
- |
| 18.1.6.2(By inspection) |
- |
- |
|
- |
| 18.1.6.3(Pull test as per cl 18.1.6.3) |
- |
- |
|
- |
| 18.2(Impact tester) |
- |
- |
|
- |
| 18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4) |
- |
- |
|
- |
| 18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5) |
- |
- |
|
- |
| 18.7(Pull test as per table 18.7) |
- |
- |
|
- |
| 18.8(as per cl 18.8.2 and 18.8.3) |
- |
- |
|
- |
| 18.9(axial pull of 15N/30N) |
- |
- |
|
- |
| 18.101(as per cl 18.101.2 and 101.3) |
- |
- |
|
- |
| 18.102(Hydrualic test) |
- |
- |
|
- |
| 19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
- |
|
- |
| 19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
- |
|
- |
| 19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
- |
|
- |
| 19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
- |
|
- |
| 19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
- |
|
- |
| 19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
- |
|
- |
| 19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
- |
|
- |
| 19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15) |
- |
- |
|
- |
| 19.2.1(By inspection) |
- |
- |
|
- |
| 19.2.2(By inspection) |
- |
- |
|
- |
| 19.2.3(By inspection) |
- |
- |
|
- |
| 19.2.4(By inspection) |
- |
- |
|
- |
| 19.2.4.1(By inspection) |
- |
- |
|
- |
| 19.2.5(By inspection) |
- |
- |
|
- |
| 19.2.5.1(By inspection) |
- |
- |
|
- |
| 19.2.6(By inspection) |
- |
- |
|
- |
| 20.1(as per table 20.2) |
- |
- |
|
- |
| 20.2.1(as per table 20.3) |
- |
- |
|
- |
| 20.2.2(as per table 20.4) |
- |
- |
|
- |
| 21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5) |
- |
- |
|
- |
| 21.2.7(As per cl G.4) |
- |
- |
|
- |
| 22.1.1(As per cl 21.1.3 to 21.1.6) |
- |
- |
|
- |
| 25(as per annexure H) |
- |
- |
|
- |
| 27.1(as per annexure H) |
- |
- |
|
- |
| 27.2(as per cl 27.2.1 and 27.2.2) |
- |
- |
|
- |
| 27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .) |
- |
- |
|
- |
| H 27.4(as per cl H 27.4.1 and H 27.4.2) |
- |
- |
|
- |
| 10.1.7.1(by inspection) |
- |
- |
|
- |
| 11.7.2.11 to 11.7.2.15(By measurement) |
- |
- |
|
- |
| 5(By inspection) |
- |
- |
|
- |
| 5.1(By inspection) |
- |
- |
|
- |
| 5.2(By inspection) |
- |
- |
|
- |
| 6.1(By inspection) |
- |
- |
|
- |
| 6.2(By inspection) |
- |
- |
|
- |
| 6.3(By inspection) |
- |
- |
|
- |
| 6.4(By inspection) |
- |
- |
|
- |
| 6.5(By inspection) |
- |
- |
|
- |
| 6.5.1(IEC 60529 and by inspection) |
- |
- |
|
- |
| 6.5.2(IEC 60529 and by inspection) |
- |
- |
|
- |
| 6.5.3(Annexure N and by inspection) |
- |
- |
|
- |
| 6.6(By inspection) |
- |
- |
|
- |
| 6.7.1(By inspection) |
- |
- |
|
- |
| 6.7.2(By inspection) |
- |
- |
|
- |
| 6.8(By inspection) |
- |
- |
|
- |
| 6.8.2(By inspection) |
- |
- |
|
- |
| 6.9(Annexure H and by inspection) |
- |
- |
|
- |
| 6.1(By inspection) |
- |
- |
|
- |
| 6.11(By inspection) |
- |
- |
|
- |
| 6.12(By inspection) |
- |
- |
|
- |
| 6.13(By inspection) |
- |
- |
|
- |
| 6.14(By inspection) |
- |
- |
|
- |
| 6.15(Annexure J and by inspection) |
- |
- |
|
- |
| 6.16(By inspection) |
- |
- |
|
- |
| 6.18(Annexure H) |
- |
- |
|
- |
| 6.17(Annexure H) |
- |
- |
|
- |
| 6.4.3(By inspection) |
- |
- |
|
- |
| H 17.1.4.2(as per cl H 17.1.4.2) |
- |
- |
|
- |
| H.17.14(as per cl H 17.4.16) |
- |
- |
|
- |
| J 17.18.5(as per cl J 17.8.5) |
- |
- |
|
- |
| J 17.18.5(as per cl J 17.8.6) |
- |
- |
|
- |
| J 17.17.2(as per table 13.1) |
- |
- |
|
- |
| J 17.17(As per table 13.2) |
- |
- |
|
- |
| J. 17. 18.2(as per cl J. 17. 18.2) |
- |
- |
|
- |
| J. 17. 18.3(as per cl J. 17. 18.3) |
- |
- |
|
- |
| J. 17. 18.4(as per cl J. 17. 18.4) |
- |
- |
|
- |
| 8(Test finger as shown in figure 2 with force 20 N/30 N) |
- |
- |
|
- |
| 17.1(by the tests of 17.1.3 as indicated in 17.16) |
- |
- |
|
- |
| 17.6(as per cl 17.6.1 and 17.6.2) |
- |
- |
|
- |
| 17.7(as per cl 17.7.1 to 17.7.7) |
- |
- |
|
- |
| 17.8(as per cl 17.8.1 to 17.8.4.1) |
- |
- |
|
- |
| 17.9(as per cl 17.9.1 to 17.9.4) |
- |
- |
|
- |
| 17.1(as per cl 17.10.1 to 17.10.4) |
- |
- |
|
- |
| 17.11(as per cl 17.11.1 to 17.11.4) |
- |
- |
|
- |
| 17.12(as per cl 17.12.1 to 17.12.5) |
- |
- |
|
- |
| 17.13(as per cl 17.13.1 to 17.13.4) |
- |
- |
|
- |
| 17.15.2(as per cl 17.15.2 and 17.15.2.3) |
- |
- |
|
- |
| 17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C) |
- |
- |
|
- |
| 17.16.107( 250 thermal cycles.) |
- |
- |
|
- |
| 17.16.108( 7 h at a temperature of –20 C (or lower, if declared)) |
- |
- |
|
- |
| 17.101.1(as per cl 17.101.1 to 17.105) |
- |
- |
|
- |
