BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15361 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

12841

BIS, Central Laboratory (CL)

None

IS 2556 : Part 5 (1994)

Vitreous sanitary appliances (Vitreous China) - Specification: Part 5 specific requirements of laboratory sinks

Rs 675/- +charges as per part I View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3 - General Requirements ( Ref. Cl.9.5 of IS 2556 (Part 1) : 1994) (Chemical Resistance, Annex - B of IS 2556 (Part 1) : 1994))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage -IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-·Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Spots. blisters and pinholes-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Bubbles and specks-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes -IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks -IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing mark -IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Wavy finiah-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Warpages-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Dislocations-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Spots, blisters and pinholes-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Bubbles and specks-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Polishing marks-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-Visual surface-wavy finish-IS 2556 (Part 1)))	-
3 (General requirements-Thickness IS 2556 (Part 1))	-
3 (General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-
3 (General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-
4 (Sizes)	-
5-Table 1 ( DIMENSIONS AND TOLERANCES-L)	-
5-Table 1 ( DIMENSIONS AND TOLERANCES-B)	-
5-Table 1 ( DIMENSIONS AND TOLERANCES-H)	-
5-Table 1 ( DIMENSIONS AND TOLERANCES-a)	-
5-Table 1 ( DIMENSIONS AND TOLERANCES-b)	-
5-Table 1 ( DIMENSIONS AND TOLERANCES-c)	-
6.1 (Constructions-)	-
6.2 (Constructions-)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-d3)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-d4)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-d5)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-d6)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-h Min.)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-h Max.)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-h1 Min.)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-h1 Max.)	-
7 (FINISH)	-
6.4 (Constructions-outlet )	-
Cl 6.2.1 (CONSTRUCTION)	-

-
-

12842

BIS, Central Laboratory (CL)

None

IS 12492 (1988)

Specification for thermoplastics hoses (Textile Reinforced) for compressed air

Rs.7200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3 (TYPES)	-
Cl 4.1 (REQUIREMENTS)	-
Cl 4.1.1 (REQUIREMENTS)	-
Cl 4.1.2 (REQUIREMENTS)	-
Cl 4.1.3 (REQUIREMENTS)	-
Cl 4.1.3 (REQUIREMENTS)	-
Cl 4.2.1 Table-1 (DIMENSIONS AND TOLERANCES)	-
Cl 4.2.2 Table-1 (DIMENSIONS AND TOLERANCES)	-
Cl 4.2.2 Table-1 (DIMENSIONS AND TOLERANCES)	-
Cl 4.2.3 (DIMENSIONS AND TOLERANCES)	-
Cl 4.3.1 (Physical Requirements)	-
Cl 4.3.2 (Physical Requirements)	-
Cl 4.4.1 (Performance Requirements)	-
Cl 4.4.2 Table -2 (Performance Requirements)	-
Cl 4.4.3 Table -3 (Performance Requirements)	-

-
Excluding Resistance to Liquids, Performance Test- Cold bend radius

12843

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 9585 (2021)

Lactometers - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. No. 11.2 (Check test)	-

-
Excluding Chemical-test facility available for cl.11

12844

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 15532 (2004)

Plastics crates for fruits and vegetables - Specification

11250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Material)	-	2000	-
3.3(Shape, Dimensions and Design)	-	500	-
3.4(Mass)	-	250	-
3.5(Appearance and Surface Finish)	-	300	-
3.6(Dimensional Stability)	-	700	-
3.7(Confluence Line Strength)	-	1100	-
3.8.1(Compressive Strength (Resistance to Applied Load))	-	1100	-
3.8.2(Resistance to Drop)	-	1100	-
3.9(Resistance to Environmental Stress Cracking)	-	1200	-
3.10.1(Suspension Test)	-	2200	-
3.10.2(Free-Fall Test)	-	0	INCLUDED IN SUSPENSION TEST

31 Dec, 2026

-
-

12845

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 8043 (1991)

Specification for hydrophobic Portland cement

Hydrophobic Portland Cement

32110 View breakup
Rs.32110/- (excluding transverse strength), Rs.43880/- (including transverse strength)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 (ref. 6 - Table - 1 i of IS 269:2015)(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	10490	-
5.1 (ref. 6 - Table - 1 ii of IS 269:2015)(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	4450	-
5.1 (ref. 6 - Table - 1 iii of IS 269:2015)(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	1940	-
5.1 (ref. 6 - Table - 1 iv of IS 269:2015)(Magnesia - Cl 4.8 of IS 4032:1985)	-	2510	-
5.1 (ref. 6 - Table - 1 v of IS 269:2015)(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	1940	-
5.1 (ref. 6 - Table - 1 vi of IS 269:2015)(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	970	-
5.1 (ref. 6 - Table - 1 vii of IS 269:2015)(Chloride content - Cl 4.13 of IS 4032:1985)	-	1940	-
5.1 (ref. 6 - Table - 1 viii of IS 269:2015)( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1610	-
6.1(Fineness 4031 Part 2)	-	1610	-
6.2(Expansion by Le Chatelier- IS 269 & 4031 Part 3)	-	1610	-
6.2(Expansion after aeration - IS 269 & 4031 Part 3)	-	1610	-
6.2(Expansion by Autoclave- IS 269 & 4031 Part 3)	-	2900	-
6.2(Expansion after aeration- IS 269 & 4031 Part 3)	-	2900	-
6.2(Setting Time Initial- IS 269 & 4031 Part 5)	-	725	-
6.2(Setting Time Final- IS 269 & 4031 Part 5)	-	725	-
6.3 a)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1650	-
6.3 b)(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1870	-
6.3 c)(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2200	-
6.6(Hydrophobicity- Annex B)	-	970	-

15 May, 2027

-
-

12846

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 16221 : Part 2 (2015)

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	135000	10& DISCOUNT FOR BIS
5(Marking and documentation)	-	10000	10& DISCOUNT FOR BIS
6(Environmental requirements and conditions)	-	10000	10& DISCOUNT FOR BIS
7(Protection against electric shock and energy hazards)	-	30000	10& DISCOUNT FOR BIS
8(Protection against Mechanical Hazards)	-	10000	10& DISCOUNT FOR BIS
9(Protection against Fire Hazards)	-	10000	10& DISCOUNT FOR BIS
10(Protection against Sonic Pressure Hazards)	-	20000	10& DISCOUNT FOR BIS
11(Protection against Liquid Hazards)	-	10000	10& DISCOUNT FOR BIS
12(Protection against Chemical Hazards)	-	10000	10& DISCOUNT FOR BIS
13(Physical Requirements)	-	20000	10& DISCOUNT FOR BIS
6.4(UV exposure)	-	10000	10& DISCOUNT FOR BIS
Clause No. 4.3(Thermal testing)	-	30000	10& DISCOUNT FOR BIS
Clause No. 4.4(Testing in single fault condition)	-	30000	10& DISCOUNT FOR BIS
4.5(Humidity preconditioning)	-	25000	10& DISCOUNT FOR BIS
4.6(Backfeed voltage protection)	-	20000	10& DISCOUNT FOR BIS
4.7(Electrical rating tests)	-	10000	10& DISCOUNT FOR BIS
4.8(Additional tests for grid interactive inverters)	-	20000	10& DISCOUNT FOR BIS

05 Apr, 2027

-
Included w.e.f. 1-10-2021. Exclusions: UV resistance (Cl.13.6.4), Component (Cl.14)

12847

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 2993 (1998)

A.C. motor capacitors (Second Revision)

420000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.6(Visual Examination)	-	5000	10% Discount Offred to BIS
2.1(Check of dimensions)	-	5000	10% Discount Offred to BIS
2.9(Capacitance measurement)	-	10000	10% Discount Offred to BIS
2.11.1(Robustness of terminations)	-	5000	10% Discount Offred to BIS
2.11.1.1(Tensile)	-	5000	10% Discount Offred to BIS
2.11.1.2(Bending (half cf the terminations))	-	5000	10% Discount Offred to BIS
2.11 .1.3(Torsion (other half of the terminations))	-	5000	10% Discount Offred to BIS
2.11.1.5(Visual Examination)	-	5000	10% Discount Offred to BIS
2.11.2(Soldering)	-	5000	10% Discount Offred to BIS
2.11.3(Vibration)	-	10000	10% Discount Offred to BIS
2.11.4(fixing bolt or stud (if fitted))	-	5000	10% Discount Offred to BIS
2.12(Sealing Test)	-	15000	10% Discount Offred to BIS
2.13(Endurance test)	-	20000	10% Discount Offred to BIS
2.13.1(Endurance test :Testing in air with forced circulation)	-	20000	-
2.13.3(Endurance test : Conditions of compliance)	-	5000	10% Discount Offred to BIS
2.14(Damping heat test)	-	57000	10% Discount Offred to BIS
2.7(Voltage test between terminals)	-	10000	10% Discount Offred to BIS
2.8(Voltage test between terminals and case)	-	10000	10% Discount Offred to BIS
2.15(Self-healing test (if applicable))	-	72000	10% Discount Offred to BIS
2.16.3(Destruction test : Test procedure)	-	30000	10% Discount Offred to BIS
2.16.3.1(Destruction test : Test procedure - Preparation and pre-conditioning )	-	20000	10% Discount Offred to BIS
2.16.3.2(Destruction test : Test procedure : DC conditioning)	-	20000	10% Discount Offred to BIS
2.16.3.3(Destruction test : Test procedure : AC destruction test)	-	30000	10% Discount Offred to BIS
2.5(Tangent of loss angle)	-	5000	10% Discount Offred to BIS
2.16.4(Destruction tes: Evaluation of the failure )	-	50000	10% Discount Offred to BIS
2.10(Check of dimensions)	-	5000	10% Discount Offred to BIS
4.1(Creepage distances and clearances)	-	5000	10% Discount Offred to BIS
4.2(Terminals and connecting cables)	-	2000	10% Discount Offred to BIS
4.3(Earth connections)	-	2000	10% Discount Offred to BIS
4.4(Discharge devices)	-	5000	10% Discount Offred to BIS

05 Apr, 2027

-
-

12848

Envirocare Labs Pvt Ltd, Thane

7120616

IS 14542 (1998)

Partly skimmed milk powder specification

Type I, Type II

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.6.1(Bacterial Count (IS 5402))	-	400		-
Cl 6.6.2(Coliform Count ((IS 5402))	-	400		-

-
-

12849

Envirocare Labs Pvt Ltd, Thane

7120616

IS 1009 (1979)

Specification for maida for General Purposes (Second Revision)

III

3450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1(Description)	-	100	-
Clause 3.2(Microscopic Apperance)	-	100	-
Clause 3.3 Table 1(Moisture)	-	300	-
Clause 3.3 Table 1(Total Ash)	-	400	-
Clause 3.3 Table 1(Acid Insoluble ash)	-	650	-
Clause 3.3 Table 1(Gluten)	-	750	-
Clause 3.3 Table 1(Alcoholic acidity)	-	400	-
Clause 3.3 Table 2(Granularity)	-	200	-
Clause 3.3 Table 3(Uric acid)	-	550	-

-
-

12850

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 16221 : Part 1 (2016)

Safety of Power Converters for use in Photovoltaic Power Systems Part 1 General Requirements

750000 View breakup
UPS/Invertors upto 10 KVA- Rs. 5,50,000/- UPS/Invertors above 10 KVA and < 20 KVA- Rs. 7,50,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15(Software and firmware performing safety functions)	-	2000	10% discount for BIS
13(Physical requirements)	-	30000	10% discount for BIS
12(Chemical hazards)	-	15000	10% discount for BIS
11(Protection against liquid hazards)	-	15000	10% discount for BIS
10(Protection against Sonic Pressure hazards)	-	30000	10% discount for BIS
9(Protection Against Fire Hazards)	-	20000	10% discount for BIS
8(Protection Against mechanical Hazards)	-	20000	10% discount for BIS
7(Protection against electric shock and energy hazards)	-	40000	10% discount for BIS
6(Environmental Requirements and conditions)	-	20000	10% discount for BIS
5(Marking and documentation)	-	15000	10% discount for BIS
4(General testing requirements)	-	200000	10% discount for BIS
6.4(UV exposure)	-	15000	10% discount for BIS
9.1.4.3(Hot flaming oil test)	-	10000	10% discount for BIS
4.2(Thermal testing)	-	30000	10% discount for BIS
4.4(Testing in single fault condition)	-	60000	10% discount for BIS
4.5(Humidity preconditioning)	-	20000	10% discount for BIS
4.6(Backfeed voltage protection)	-	40000	10% discount for BIS
4.7(Electrical rating tests)	-	60000	10% discount for BIS

05 Apr, 2027

-
Included w.e.f. 1-10-2021. Exclusions: UV resistance (Cl.13.6.4), Component (Cl.14)

12851

BIS, Southern Regional Laboratory (SRL)

None

IS 2556 : Part 16 (2002)

Vitreous sanitary appliances (Vitreous China) - Specification: Part 16 specific requirements of wash down wall mounted water closets

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
"3 IS 2556(P1)" (GENERAL REQUIREMENTS)	-
"5 Table 1 & 2 " (DIMENSIONS AND TOLERANCES)	-
7 (FINISH)	-
6.1 (CONSTRUCTION)	-
8.1 ()	-
8.2 (Smudge Test)	-
8.3 (Holding Capacity Test)	-
8.4 (Single Ball Test)	-
9 (LOAD TEST)	-
4 (PATTERNS)	-
Clause 3 and Clause 9.5 of IS 2556 (Part 1) (Chemical resistance)	-

-
2 Nos. Advised wooden packing to avoid damage during transit.

12852

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 17570 : Part 1 (2021)

Air Filters for general ventilation Part 1 Technical specifications requirements and classification system based upon particulate matter efficiency ePM Adoption of ISO 16890-1:2016

130000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5.2(Filter Material)	-	35000	-
CLAUSE 5.4(Resistance to air flow)	-	60000	-
CLAUSE 5.6(Arrestance)	-	60000	-
CLAUSE 7(Efficiency test)	-	60000	-

14 Nov, 2027

-
-

12853

BIS, Central Laboratory (CL)

None

IS 9585 (2021)

Lactometers - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3 (SIZE)	-
Cl 4.1 (FORM)	-
Cl 4.2 (FORM)	-
Cl 4.3 (FORM)	-
Cl 5.1 (MATERIAL OF CONSTRUCTION)	-
Cl 5.2 (MATERIAL OF CONSTRUCTION)	-
Cl 5.3 (MATERIAL OF CONSTRUCTION)	-
Cl 6.1 (WORKMANSHIP)	-
Cl 6.2 (WORKMANSHIP)	-
Cl 6.3 (WORKMANSHIP)	-
Cl 6.4 (WORKMANSHIP)	-
Cl 6.5 (WORKMANSHIP)	-
Cl 6.6 (WORKMANSHIP)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 8.1 (SCALE)	-
Cl 8.3 (SCALE)	-
Cl 8.3 (SCALE)	-
Cl 8.3 (SCALE)	-
Cl 8.4 (SCALE)	-
Cl 8.4 (SCALE)	-
Cl 8.5 (SCALE)	-
Cl 8.6 (SCALE)	-
Cl 8.7 (SCALE)	-
Cl 9 (REFERENCE MARK)	-
Cl 9 (REFERENCE MARK)	-
Cl 10.1 (INSCRIPTIONS)	-
Cl 10.1.1 (INSCRIPTIONS)	-
Cl 12.1 (LACTOMETER JARS)	-
Cl 12.1 (LACTOMETER JARS)	-
Cl 12.1 (LACTOMETER JARS)	-
Cl 12.2 (LACTOMETER JARS)	-
Cl 13 (THERMOMETER)	-
Cl 13 (THERMOMETER)	-
Cl 13 (THERMOMETER)	-
Cl 13 (THERMOMETER)	-
Cl 13 (THERMOMETER)	-
Cl 13 (THERMOMETER)	-

-
-

12854

BIS, Central Laboratory (CL)

None

IS 15834 (2020)

Stainless Steel Sliding Door Bolts ( Aldrops ) for Use With Padlocks - Specification ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
6 (MANUFACTURE)	-
7 (FINISH)	-
Cl.4 (Carbon)	-
Cl.4 (Sulphur)	-
Cl.4 (Phosphorus)	-
Cl.4 (Manganese)	-
Cl.4 (Silicon)	-
Cl.4 (Nickel)	-
Cl.4 (Chromium)	-
Cl.4 (Copper)	-
Cl.4 (Molybdenum)	-
Cl.4 (Nitrogen)	-
Cl.4 (Titanium)	-
Cl.4 (Niobium)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-

-
Material Grade/ designation as per relevant IS may please be declared. Sample dia > 3mm or thickness > 0.8 mm can only be tested

12855

BIS, Central Laboratory (CL)

None

IS 5342 (1996)

Ascorbic acid, food grade - Specification (First Revision)

6716.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.4 table 1 (Sulphated ash)	-
4.4 table 1 (Loss on drying over sulphuric acid for 24 hours)	-
4.3 (pH)	-
4.4 table 1 (Arsenic)	-
4.4 table 1 (Heavy metals)	-
3 (Description)	-
4.4 table 1 (Purity as C6H8O6)	-
4.1.1 (Identification test)	-

-
500 gm x 3 Excluding 1- Purity 2-Loss on drying;

12856

BIS, Central Laboratory (CL)

None

IS 1084 (2005)

Textiles – Manila ropes – Specification (fifth revision)

Rs. 7218/- excluding Lubrication. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 Table 1 to 3 (Manila Fibre )	-
6.2 Table 1 to 3 (Yarn )	-
6.3 (Strand )	-
6.4 (Ropes The ropes shall be well-laid and free from defects and each coil shall be continuous throughout its length and shall not contain loose ends, splices or joints in the strands or in the rope. The number of strands in the rope and the lay of rope, unless otherwise specified, shall be as in next colum:)	-
8.1 IS 7071 (Part 2) (Mass of the Coil The net mass of the coil shall be determined in accordance with IS 7071 (Part 2). The difference between the observed mass and the calculated value of mass obtained by multiplying nominal linear density of the rope with the length of rope in the coil shall be within limits specified below: Reference No. of Rope)	-
8.2 IS 7071 (Parts 1 to 3) (Pitch The pitch of rope, when determined in accordance with IS 7071 (Parts 1 to 3) shall conform to the following requirements: Type of Rope: Pitch :)	-
8.3 IS 7071 (Parts 1 to 3) (Length of Coil The length of each coil when tested as per IS 7071 (Parts 1 to 3) shall not be less than 220 m or as declared. However, if so agreed between the buyer and the seller, the length of coil may be tested under zero tension and ± 5 percent tolerance shall be applicable for the rope with diameters less than or equal to 14 and ± 3 percent with a diameter greater than 14 on the specified/declared length.)	-
8.4 (Diameter The diameter of the rope shall not be less than that specified in Tables 1 to 3 and shall not exceed by more than the following tolerances: Diameter: mm)	-
8.5 Table: 1 / 2 / 3 (No. of yarns per strand)	-
8.5 Table: 1 / 2 / 3 (Linear density)	-
8.5 Table: 1 / 2 / 3 (Breaking strength Grade :)	-
9 (FINISH)	-
6.6 IS 3522 (Part 1) (Rot-Proofing Treatment If so ordered, ropes shall be rot-proofed by the application of zinc or copper based rot-proofing agent in appropriate quantity as agreed to protect the rope from fungus and microbial attack. The rot-proofing agent may be applied at the dressing stage for uniform penetration in the rope. Ropes which have been so treated shall otherwise comply, in all respects with the requirements of this standard. When Zn or Copper are extracted in accordance with IS 3522 (Part 1), it shall be minimum 0.5 percent and 0.2 percent respectively.)	-

-
-

12857

BIS, Southern Regional Laboratory (SRL)

None

IS 13258 (2014)

Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gas - Requirements for inspection and reconditioning of used lpg cylinders (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.4 (Tare Weight Verification)	-
14 (HYDROSTATIC TEST)	-
16 (PNEUMATIC TEST)	-

-
-

12858

BIS, Central Laboratory (CL)

None

IS 2548 : Part 2 (1996)

Plastic seats and covers for water - Closets - Specification: Part 2 thermoplastic seats and covers (Fifth Revision)

Rs. 5700/- and testing charges as per referred Iss View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Shapes)	-
5.1.1.1 a) Seats: (i) Flat / Recessed underside,)	-
5.1.1.1 a) Seats: (ii) For recessed underside thickness,3 mm,Min ,)	-
5.1.1.1 a) Seats: (iii) Open / Closed front pattern .)	-
5.1.1 a) Seats: (iv) The design shall provide for fixing of the seat on water- closet by hinging device.)	-
5.1.1 a) Seats: (v) The seat shall be free from warpage)	-
5.1.2 b) Covers: (i) Shall completely cover the aperture of seat,easy to raise from seat,easy to be connected to the seat by hinging device & shall not have any projection under- side the cover.)	-
5.1.2 b) Covers: (ii) The cover shall not be less than 3 mm in thickness at any point.)	-
5.1.2 b) Covers: (iii) The cover shall be free from warpage.)	-
5.2 Finish (i) The surfaces of the seats, covers and components shall be smooth, free from blisters and delamination and reasonably free from flowlines, contamination, streaking and unintended colour variation.)	-
5.2 Finish (ii) They shall be capable of being easily cleaned and shall not be adversely affected by household cleaners.)	-
5.2 Finish (iii) There shall be no sharp edges.)	-
5.2 Finish (iv) The mouldings shall be non-absorptive and free from cracks, crevices and internal voids.)	-
6 (Dimensions ( mm))	-
6.1 (Seat)	-
6.1 a (A)	-
6.1 b (B)	-
6.1 C (C)	-
6.1 d (D)	-
6.1 e (E)	-
6.1 f (F)	-
6.1 g (G)	-
6.1 h (Thickness of seat at thinnest point , 3)	-
6.1 j (10)	-
Cl.6.2 Cover a) (Thickness of cover at thinnest point, 3)	-
Cl.6.2 Cover b) (10)	-
Hinging Device Cl 7 ((All dimensions are in mm))	-
Buffers & Distance pieces Cl.8 (Buffer) i) (No. of buffers,3 Min.)	-
8.1.1 ii) (Size of seat buffers ;)	-
8.1.1, i) (Shall have four radial ribs,moulded integrally supported by the top surface of the water-closet.supported by the top surface of the water-closet.)	-
8.1.1, ii) (Shall be not less than 45 mm in the radial direction.)	-
8.1.1, iii) (Width on plan 3 mm,Min.)	-
8.1.1, iv) (The distance between two adjacent ribs shall be not less than 100 mm.)	-
Cl 8.2.1 a) (Shall be fitted with the same number of buffers as provided for the seat.)	-
Cl 8.2.1 b) (The buffers below the seat & cover shall be placed vertically over each other.)	-
8.2.2 vi) (Alternatively the seat and cover may not be provided with buffers or distance pieces. In that case the design of seat shall be such that underside contact surface is flat and covers the whole rim of water-closet pan and is stable.)	-
Water absorption Cl 9.2 a) (1) Seat 0.75 % Max)	-
Cl9.3 Impact Resistance (1) The seat,hinges & buffers / distance pieces shall show no visible damage.)	-
Cl.9.7 Surface Hardness (Rockwell hardness number a)Seat)	-
Cl9.3 Impact Resistance (1) The seat,hinges & buffers / distance pieces shall show no visible damage.)	-
Cl .9.8 Endurance test for Seats,Covers and buffers (Shall not be dislocated & damaged.)	-
Cl 7 (Hinging Device)	-
Cl 9 (Rigidity (Cl.9.4))	-
4.1 (Seats and cover)	-

-
-

12859

BIS, Western Regional Laboratory (WRL)

None

IS 2548 : Part 2 (1996)

Plastic seats and covers for water - Closets - Specification: Part 2 thermoplastic seats and covers (Fifth Revision)

Rs. 5700/- and testing charges as per referred Iss View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Seats and cover)	-
4.2 (Hinging Device a) Bronze or Brass with Ni/Cr plating conforming to IS 1068,)	-
4.2 (b)Mild Steel with Ni/Cr plating conforming to IS 1068,)	-
4.2 (c)Al.Alloy with anodic coating conforming to IS 1868,)	-
4.2 (d)Suitable plastic. i) Water absorption on immersion for 24 hours should not exceed 0.6 percent by mass,)	-
4.2 (ii) Elongation should be 15 percent, Min, and)	-
4.2 (iii)The material should be capable of withstanding temperature up to 55°C without undergoing deformation or softening and becoming unsatisfactory in performance.)	-
5.1 (Shapes)	-
5.1.1.1 a) Seats: (ii) For recessed underside thickness,3 mm,Min ,)	-
5.1.1.1 a) Seats: (iii) Open / Closed front pattern .)	-
5.1.1 a) Seats: (iv) The design shall provide for fixing of the seat on water- closet by hinging device.)	-
5.1.1 a) Seats: (v) The seat shall be free from warpage)	-
5.1.1 a) Seats: (iv) The design shall provide for fixing of the seat on water- closet by hinging device.)	-
5.1.2 b) Covers: (i) Shall completely cover the aperture of seat,easy to raise from seat,easy to be connected to the seat by hinging device & shall not have any projection under- side the cover.)	-
5.1.2 b) Covers: (ii) The cover shall not be less than 3 mm in thickness at any point.)	-
5.1.2 b) Covers: (iii) The cover shall be free from warpage.)	-
5.2 Finish (i) The surfaces of the seats, covers and components shall be smooth, free from blisters and delamination and reasonably free from flowlines, contamination, streaking and unintended colour variation.)	-
5.2 Finish (ii) They shall be capable of being easily cleaned and shall not be adversely affected by household cleaners.)	-
5.2 Finish (iii) There shall be no sharp edges.)	-
5.2 Finish (iv) The mouldings shall be non-absorptive and free from cracks, crevices and internal voids.)	-
6.1 a (A)	-
6.1 b (B)	-
6.1 C (C)	-
6.1 d (D)	-
6.1 e (E)	-
6.1 f (F)	-
6.1 g (G)	-
6.1 h (Thickness of seat at thinnest point , 3)	-
Cl.6.2 Cover a) (Thickness of cover at thinnest point, 3)	-
6.1 j (10)	-
Hinging Device Cl 7 ((All dimensions are in mm))	-
Buffers & Distance pieces Cl.8 (Buffer) i) (No. of buffers,3 Min.)	-
8.1.1 ii) (Size of seat buffers ;)	-
8.1.1, i) (Shall have four radial ribs,moulded integrally supported by the top surface of the water-closet.supported by the top surface of the water-closet.)	-
8.1.1, ii) (Shall be not less than 45 mm in the radial direction.)	-
8.1.1, iii) (Width on plan 3 mm,Min.)	-
8.1.1, iv) (The distance between two adjacent ribs shall be not less than 100 mm.)	-
Cl 8.2.1 a) (Shall be fitted with the same number of buffers as provided for the seat.)	-
Cl 8.2.1 b) (The buffers below the seat & cover shall be placed vertically over each other.)	-
8.2.2 vi) (Alternatively the seat and cover may not be provided with buffers or distance pieces. In that case the design of seat shall be such that underside contact surface is flat and covers the whole rim of water-closet pan and is stable.)	-
Water absorption Cl 9.2 a) (1) Seat 0.75 % Max)	-
Cl9.3 Impact Resistance (1) The seat,hinges & buffers / distance pieces shall show no visible damage.)	-
Cl.9.5 Staining by Seats & Covers (Shall not be any visible colour transfer to the white cloth.)	-
Cl.9.7 Surface Hardness (Rockwell hardness number a)Seat)	-
Cl .9.8 Endurance test for Seats,Covers and buffers (Shall not be dislocated & damaged.)	-

-
-

12860

COTERD SOLUTIONS (OPC) PRIVATE LIMITED, AC TEST LAB, GREATER NOIDA

8170806

IS 8148 (2018)

Ducted and package air - Conditioners - Specification (Second Revision)

IDU/ODU, Ducted (IDU & ODU). Up to 17.5kW

685000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 &4.5(Salt Spray Test)	-	40000	-
13.2(BIS Certification Marking)	-	5000	-
12.3.3(Safety Tests: )	-	0	-
12.2.6(Provisions for Earthing (Earth Resistance Test))	-	5000	-
12.2.5(Leakage Current Test)	-	5000	-
12.2.4(High Voltage Test)	-	5000	-
12.2.3(Insulation Resistance Test)	-	5000	-
12.2.2(Pressure Test or Leakage Test)	-	50000	-
12.2.1( Running Test)	-	0	-
11(Sound Test)	-	35000	-
9.3(Automatic Defrost Performance Test)	-	50000	-
9.2(Maximum Heating Performance Test)	-	80000	-
9.1(Heating Capacity Test)	-	100000	-
8.8(Power Consumption Test)	-	20000	-
7.6 & 8.7(Condensate Desposal Test)	-	40000	-
7.5 & 8.6(Enclosure Sweat Test)	-	30000	-
7.4 & 8.4, 8.5(Freeze-Up Test)	-	30000	-
7.3 & 8.3(Maximum Cooling Conditions Test)	-	80000	-
7.1 , 7.2 & 8.1(Capacity Rating Test & ISEER Test Condition )	-	150000	-
4.1 to 4.14(Constrution- IS 8148)	-	0	-

15 Jul, 2028

-
-

12861

COTERD SOLUTIONS (OPC) PRIVATE LIMITED, AC TEST LAB, GREATER NOIDA

8170806

IS 1391 : Part 2 (2018)

Room air conditioners - Specification: Part 2 split air conditioners (Third Revision)

Cooling/Cooling & heating IDU, ODU & both. Up to 17.5kW

640000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 8.2.2 (The Maximum Heating/Overload Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Heating Capacity test (Clause No. 8.2.1, 9.11), Power consumption test by heat pump (Clause No. 9.8)(The Heating capacity test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 5.1(Physical Verification)	-	0	-
Clause No. 15.3.3(a)(Protection against access to the live part was conducted using Test Probe B.)	-	5000	-
Clause No. 15.2.5 & 15.3.3(c)(Provision for Earthing (Earth Resistance Test) was conducted using a Earth Continuity Tester. )	-	5000	-
Clause No. 15.2.3 & 15.3.3(b)(High Voltage (Electric strength) Test was conducted using AC withstanding voltage/IR Tester. )	-	5000	-
Clause No. 15.2.4 & 15.3.3(d)( 3 Leakage Current at Operating Temperature (Leakage Current Test) was conducted using Leak Current Hitester.)	-	5000	-
Clause No. 14.3( Sound Test was conducted using Sound Level Meter. )	-	25000	-
Clause No. 8.1.3, 9.5( Freeze Up (Air Blockage Test & Drip Test) Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	Freeze Up (Air Blockage Test & Drip Test) Test charge below rated capacity 10.55 KW (3 Tr.) is Rs. 100000.00 Freeze Up (Air Blockage Test & Drip Test) Test charge rated capacity 10.55 kw and above (3 Tr. and above) is Rs. 125000.00
Clause No. 8.1.4, 9.6( Enclosure Sweat test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	Enclosure Sweat test charge below rated capacity 10.55 KW (3 Tr.) is Rs. 50000.00 Enclosure Sweat test charge rated capacity 10.55 kw and above (3 Tr. and above) is Rs. 60000.00
Clause No. 8.1.2, 9.4(Maximum Operating test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	Maximum Operating test below rated capacity 10.55 KW (3 Tr.) is Rs. 100000.00 Maximum Operating test rated capacity 10.55 kw and above (3 Tr. and above) is Rs. 125000.00
Cooling Capacity Test (Cl. No. 8.1.1, 9.9), Power Factor Test (Cl. No. 9.3), Power Consumption Test for Cooling (Cl. No. 9.7)(Cooling Capacity Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	Cooling Capacity Test below rated capacity 10.55 KW (3 Tr.) is Rs. 50000.00 Cooling Capacity Test rated capacity 10.55 kw and above (3 Tr. and above) is Rs. 60000.00
Cooling Capacity Test (Cl. No. 8.1.1, 9.9), Power Factor Test (Cl. No. 9.3), Power Consumption Test for Cooling (Cl. No. 9.7)(Cooling Capacity Test at Full Load and Half Load were conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	Cooling Capacity Test at Full Load and Half Load Test below rated capacity 10.55 KW (3 Tr.) is Rs. 100000.00 Cooling Capacity Test at Full Load and Half Load Test rated capacity 10.55 kw and above (3 Tr. and above) is Rs.150000.00
Clause No. 15.4.2( Pressure Test or Leakage Test was conducted prior to start of Cooling Capacity Test using a Balanced Ambient Room-Type Calorimeter. )	-	10000	-
5.1(General- IS 1391 (Part 2))	-	0	-
5.2(Material- IS 1391 (Part 2))	-	0	-
5.3(Electrical Charged Paerts- IS 1391 (Part 2))	-	0	-
5.4(Refrigerent Circuit- IS 1391 (Part 2))	-	0	-
5.7(Air Filter- IS 1391 (Part 2))	-	0	-
5.8(Temreture Sensing Controlers- IS 1391 (Part 1), IS/IEC 60730 Part 2 Section 9)	-	0	-
5.9(Hermetic Compressor- IS 1391 (Part 1), IS 10617)	-	0	-
5.10(Motors- IS 1391 (Part 1), IS 996)	-	0	-
5.11(Heat Exchanger- IS 1391 (Part 1), IS 11329)	-	0	-
5.6(Grounding Terminal and Grounding Lead Wire- IS 1391 (Part 2), IS 302 (Part 1))	-	0	-
9.2(Safety Conditions for A3 refrigerants)	-	0	-
15.12.4,13.2(Leakage Current Test- IS 1391 (Part 2), IS 302 (Part 1))	-	0	-
9.12, 8.3, Annex-J(Measurement of ISEER- IS 1391 (Part 2))	-	0	-
9.10, 12(Sound Test- IS 1391 (Part 2))	-	0	-
9.11(Heating Capacity Test- IS 1391 (Part 2))	-	0	-
17(Marking- IS 1391(Part 2))	-	0	-
9.9(Cooling Capacity Test- IS 1391 (Part 2 ))	-	0	-

15 Jul, 2028

-
-

12862

COTERD SOLUTIONS (OPC) PRIVATE LIMITED, AC TEST LAB, GREATER NOIDA

8170806

IS 1391 : Part 1 (2017)

Room air conditioners - Specification: Part 1 unitary air conditioners (Third Revision)

Cooling only, Cooling and Heating up to 17.5kW

530000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 9.2.2 (The Maximum Heating/Overload Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Heating Capacity test (Clause No. 9.2.1), Power consumption test by heat pump ( Clause No. 10.9)(The Heating capacity test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 5.1(Physical Verification)	-	0	-
Clause No. 16.3.3(a)(The Protection against access to the live part was conducted using Test Probe B.)	-	5000	-
Clause No. 16.2.5 & 16.3.3(c)(The Provision for Earthing (Earth Resistance Test) was conducted using a Earth Continuity Tester. )	-	5000	-
Clause No. 16.2.3 & 16.3.3(b)(The High Voltage (Electric strength) Test was conducted using AC withstanding voltage/IR Tester. )	-	5000	-
Clause No. 16.2.4 & 16.3.3(d)(The 3 Leakage Current at Operating Temperature (Leakage Current Test) was conducted using Leak Current Hitester. )	-	5000	-
Clause No. 15.3(Sound Test was conducted using Sound Level Meter. )	-	25000	-
Clause No. 9.1.3, 10.5(Freeze Up (Air Blockage Test & Drip Test) Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Clause No. 9.1.4, 10.6(Enclosure Sweat test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Clause No. 9.1.2, 10.4(Maximum Operating test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Cooling Capacity Test (Cl. No. 9.1.1, 10.10), Power Factor Test (Cl. No. 10.3), Power Consumption Test for Cooling (Cl. No. 10.8) (Cooling Capacity Test was conducted using a Balanced Ambient Room-Type Calorimeter. )	-	50000	-
Cooling Capacity Test (Cl. No. 9.1.1, 10.10), Power Factor Test (Cl. No. 10.3), Power Consumption Test for Cooling (Cl. No. 10.8) (Cooling Capacity Test at Full Load and Half Load were conducted using a Balanced Ambient Room-Type Calorimeter. )	-	100000	-
Clause No. 16.4.2(Pressure Test or Leakage Test was conducted prior to start of Cooling Capacity Test using a Balanced Ambient Room-Type Calorimeter. )	-	10000	-
5.2(Material)	-	0	-
5.3.5(Electrical Cable)	-	0	-
5.4(Refrigerent Cycle)	-	0	-
5.7(Air Filter)	-	0	-
5.8(Temreture Sensing Controlers- IS 1391 (Part 1), IS/IEC 60730 Part 2 Section 9)	-	0	-
5.9(Hermetic Compressor)	-	0	-
5.10(Motors)	-	0	-
5.11(Heat Exchanger)	-	0	-
5.6(Grounding Terminal and Grounding Lead Wire)	-	0	-
10.7(Condensate disposal test as per)	-	0	-
10.11, 15(Sound Test)	-	0	-
10.12(Heating Capacity Test)	-	0	-
10.2(Safety Conditions for unit using A3 refrigerants)	-	0	-
18(Marking- IS 1391 (Part 1))	-	0	-

15 Jul, 2028

-
-

12863

GLOBAL LAB AND CONSULTANCY SERVICES LLP, SALEM

6170916

IS 3029 (1964)

Specification for castorseed cake for purposes for fertilizer

Type 1 Type 2

900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3 Table 1 & i)("Moisture percent by weight")	-	200	-
4.3 Table 1 & ii)("Water insoluble organic nitrogen percent by weight")	-	200	-
4.3 Table 1 & iv)("Acid insoluble ash percent by weight")	-	200	-
"4.3 Table 1 & iii)"("Total ash percent by weight")	-	300	-

13 Jul, 2028

-
-

12864

GLOBAL LAB AND CONSULTANCY SERVICES LLP, SALEM

6170916

IS 1713 (1986)

Specification for decorticated groundnut oil cake as livestock feed ingredient (Second Revision)

Type I & Type II

1650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 Table 1 & i)(Moisture percent by mass)	-	200	-
4.2 Table 1 & ii)("Crude protein percent by mass")	-	350	-
4.2 Table 1 & iii)("Crude fat percent by mass")	-	350	-
4.2 Table 1 & iv)("Crude fibre percent by mass")	-	350	-
4.2 Table 1 & v)("Acid insoluble ash percent by mass")	-	400	-

13 Jul, 2028

-
-

12865

BIS, Southern Regional Laboratory (SRL)

None

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

Rs.17350/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.3 (CLASSIFICATION OF PIPES)	-
6.1 (VISUAL APPEARANCE)	-

-
Excluding Standard superseded, will be removed from scope

12866

GLOBAL LAB AND CONSULTANCY SERVICES LLP, SALEM

6170916

IS 2154 (2014)

Coconut oilcake as livestock feed ingredient - Specification (Third Revision)

Type I & Type II

2200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"4.2 Table 1 & i)"(Moisture percent by mass)	-	300	-
"4.2 Table 1 & ii)"("Crude protein percent by mass")	-	500	-
4.2 Table 1 & iii)("Crude fat percent by mass")	-	500	-
"4.2 Table 1 & iv)"("Crude fibre percent by mass")	-	500	-
"4.2 Table 1 & v)"("Acid insoluble ash percent by mass")	-	400	-

13 Jul, 2028

-
-

12867

BIS, Southern Regional Laboratory (SRL)

None

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.2.1 (Visual and Workmanship Requirement)	-
Cl 4.1.5 (Rubber rings- C)Rubber ring shall be of black colour:)	-
Cl 4.1.5 (Rubber rings- B) Change in hardness)	-
Cl 4.1.5 (Rubber rings- A)Shore hardness (Shore-A))	-
3.0 (DIMENSIONS OF PIPE)	-
3.0 (Reversion test)	-
8 (Marking)	-
Cl 4.1.5 (Rubber rings- C)Rubber ring shall be of black colour:)	-
Cl 4.1.5 (Rubber rings- B) Change in hardness)	-
Cl 4.1.5 (Rubber rings- A)Shore hardness (Shore-A))	-
3.0 (DIMENSIONS OF PIPE)	-
3.0 (Reversion test)	-
8 (Marking)	-

-
Excluding Standard superseded, will be removed from scope

12868

GLOBAL LAB AND CONSULTANCY SERVICES LLP, SALEM

6170916

IS 14702 (2014)

Undecorticated sunflower oilcake as livestock feed ingredient - Specification (First Revision)

TYPE 1/TYPE 2

3100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 Table 1 & i)(Moisture percent by mass)	-	300	-
4.2 Table 1 & ii)("Crude protein percent by mass")	-	500	-
4.2 Table 1 & iii)("Crude fat percent by mass")	-	500	-
4.2 Table 1 & iv)("Crude fibre percent by mass")	-	500	-
4.2 Table 1 & v)("Acid insoluble ash percent by mass")	-	500	-
4.2 Table 1 & vi)a(Castor husk)	-	300	-
4.2 Table 1 & vi)b(Mahua Cake)	-	500	-

13 Jul, 2028

-
-

12869

BIS, Southern Regional Laboratory (SRL)

None

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5 (Surface colour of the pipes shall be dark shade of grey)	-
Cl.7.1 (Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-
Cl.7.1 (Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-
Cl.7.1 (Wall thickness "minimum,maximum" (Take 8 reading))	-
Cl.7.2 (Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-
Cl.7.3.2 (Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-
Cl.8.1 (The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-
Cl.8.2 (When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-
Cl.8.4 (When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-
Cl.11. (Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-

-
6 No. × 1 m including 3 Nos Socket ended pipes with Washer Excluding Effect of Sunlight , Resistance to dichloromethane and Tensile test

12870

BIS, Southern Regional Laboratory (SRL)

None

IS 12395 (1988)

Specification for disposable trash bags of plastics

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found