| 12871 |
BIS, Central Laboratory (CL)
| None
| IS 14928 (2001) |
Textiles - Composite synthetic fibre ropes - Specification |
- |
Rs.2400.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.2.1 (Construction) |
- |
|
|
|
| 5.2.2 (Construction) |
- |
|
|
|
| 5.2.3 (Construction) |
- |
|
|
|
| 5.3 (Structure) |
- |
|
|
|
| 5.4 (Treatment) |
- |
|
|
|
| 5.5 ( Rope) |
- |
|
|
|
| 6.1, Table 1 /Table 2. ( Breaking Strength, Min) |
- |
|
|
|
| 6.2, Table 1 and Table 2 ( Mass of the Coil) |
- |
|
|
|
| 6.3 ( Length of Coil) |
- |
|
|
|
| 8.1 (a) (MARKING) |
- |
|
|
|
| 8.1 (b) (MARKING) |
- |
|
|
|
| 8.1 (c) (MARKING) |
- |
|
|
|
| 8.1 (d) (MARKING) |
- |
|
|
|
| 8.1 (e) (MARKING) |
- |
|
|
|
|
- |
-
- |
| 12872 |
BIS, Central Laboratory (CL)
| None
| IS 5135 : Part 1 (1994) |
Specification for hand - Rotary duster: Part 1 belly - Mounted type (Second Revision) |
- |
Testing charges for the product are Rs 7600/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0 (Capacity) |
- |
|
|
|
| 7.4 (Leakage) |
- |
|
|
|
| 8.0 (WORKMANSHIP AND FINISH) |
- |
|
|
|
|
- |
-
- |
| 12873 |
BIS, Central Laboratory (CL)
| None
| IS 1422 (1983) |
Specification for cotton duck (third revision) |
- |
Hence complete testing charges for the product are Rs.3 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4.2, Table 2, Sr. No. 1 (Scouring loss, Scoured or Dyed) |
- |
|
|
|
| Cl 4.2, Table 2, Sr. No. 1 (Scouring loss, Grey) |
- |
|
|
|
| Cl 4.2, Table 2, Sr. No. 2 (pH value ) |
- |
|
|
|
|
- |
-
- |
| 12874 |
BIS, Central Laboratory (CL)
| None
| IS 2923 (1995) |
Carmoisine, food grade - Specification (Second Revision) |
- |
Rs 6835/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 Table 1 (Water-insoluble matter) |
- |
|
|
|
| 3.1 Table 1 (Combined ether extracts) |
- |
|
|
|
| 3.1 Table 1 (Arsenic) |
- |
|
|
|
| 3.1 Table 1 (Lead) |
- |
|
|
|
| 3.1 Table 1 (Loss on drying at 135 C) |
- |
|
|
|
| 3.1 Table 1 (Heavy metals) |
- |
|
|
|
| 3.1 Table 1 (Total dye content,) |
- |
|
|
|
|
- |
-
500 gm x 3
Excuding Table .1 Cl.3.1 (2)(4)(5)(6) 2. Loss on drying at 135°C, percent by mass, and chlorides and sulphates expressed as sodium salt 5. Subsidiary Dyes 6. Dye intermediates |
| 12875 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 3735 (1996) |
Canvas Shoes, Rubber Sole |
For all variety and all Type |
Rs. 20470/- excluding colour fastness. View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.4 Adhesion Test (From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out
the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There
shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.) |
- |
|
|
|
| Cl.4.1.5 Laces
Annex B (In case the laces are black,
the same shall pass the test for freedom from sulpher
dyes when tested in accordance with Annex B. The
two ends of the lace shall be provided with suitable
metal or plastic tips.) |
- |
|
|
|
| Cl.4.1.2.1
Anmex B. (Cotton, manmade or blended shall be used as binding material.'
'Coloured cotton tapes shall have fastness to day light of rating as and if agreed
to between the purchaser and the supplier when tested in accordance with IS 686 :
1985. The black tapes shall be free from sulphur dyes when tested in accordance
with Annex B.') |
- |
|
|
|
| 4.1.1 Upper, Sl No. (i) of Table 1 (The upper shall consist of over layer of cotton, manmade or blended
conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the
requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. ) |
- |
|
|
|
| Cl.4.1.2 Binding Material(IS 1954 : 1990)
(IS1969 : 1985) (Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of
Table 2, when tested in accordance with the methods referred to in col 4 of the table.) |
- |
|
|
|
| Cl.4.1.3.1 ( Sewing thread cotton, manmade or blended shall be used for stitching of
upper. For cotton variety thread shall conform to variety No. 28 of IS 1720.
Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred
requirement of specification.
Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543.
Any other suitable thread shall have breaking load not less than above referred
requirement of specification.') |
- |
|
|
|
| Cl.4.1.4 (.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to
0.35 mm shall be used.') |
- |
|
|
|
| Cl.4.1.5 Laces (
The shoes shall be provided with fabric braided laces
either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm ) |
- |
|
|
|
| Cl.4.1.5 Laces (and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with
IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.) |
- |
|
|
|
| Cl.4.1.6 Rubber Components (The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS
13695 : 1993 shall be followed.') |
- |
|
|
|
| Cl.4.1.6.2 Ageing
col 4 of Table 5. (The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements
prescribed in col 4 of Table 5. ) |
- |
|
|
|
| Cl.4.1.6.2 Ageing
(None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually) |
- |
|
|
|
| Cl.4.1.6.3 Thickness of components
in Table 6. (Individual components of the shoes shall comply with
the thickness and material requirements prescribed
in Table 6.) |
- |
|
|
|
| Cl.4.2.2 ( The recommended design of canvas shoes is
shown in Fig. 1.) |
- |
|
|
|
| Cl.4.3 Construction
Cl 4.3.1 ( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to
40 per dm.) |
- |
|
|
|
| Cl.'4.3.2 ( Back of the upper shall be reinforced with a strip of upper material when
there is a seam.') |
- |
|
|
|
| Cl.4.3.3 ( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge
with white/scoured binding material cut in bias and formed as a tape. T ) |
- |
|
|
|
| Cl.4.3.3 (he number of stitches shall be
30 to 40 per decimetre. The counter binding shall
meet the binding of the upper at the centre top edge
of the heel.) |
- |
|
|
|
| Cl.4.3.3 (The edges of quarter shall be bound with
dyed cotton binding material or matching to the colour
of the upper, cut in bias and formed as a tape.) |
- |
|
|
|
| Cl.4.3.4 (The vantp shall be strengthened with a rubber
toe-cap (see Fig. 1).) |
- |
|
|
|
| Cl.4.3.5 ( Five pairs of eyelets shall be fitted in each
shoe. The eyelets shall be properly clenched without
any distortion. It shall properly match the colour of
the upper canvas, or as agreed to between the purchaser
and the supplier.) |
- |
|
|
|
| Cl.4.3.6 ( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and
excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined
in the standard, the shoes shall be similar to the
sample approved by the purchaser, if any) |
- |
|
|
|
| CL.4.3.7 ( The soles shall be of even substance and ofone layer only.) |
- |
|
|
|
| Cl.4.3.8 ( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. ) |
- |
|
|
|
| Cl.4.3.8 (The foxing, not less
than 18 mm wide, shall not extend beyond the edges of the sole at the bottom) |
- |
|
|
|
| CL.4.6 Mass (The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively) |
- |
|
|
|
| Cl.4.5 Consolidation Test
IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot
and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load
Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note
under 4.4).') |
- |
|
|
|
| Cl.4.1.6 Rubber Components (The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS
13695 : 1993 shall be followed.') |
- |
|
|
|
| Cl.4.1 (Table B-3 Sl I) (Allergenic and Carcinogenic Disperse Dyes) |
- |
|
|
|
| Cl.4.1 (Table B-11) (PCP-TeCP-TriCP polychlorophenols) |
- |
|
|
|
|
- |
-
Mech- Except Colour fastness to artificial daylight (Cl 4.1.1.1, Cl 4.1.1.2 , Cl 4.1.2.1) |
| 12876 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 9857 (1990) |
Welding cables - Specification (First Revision) |
- |
Rs 11400/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Conductor : Material ) |
- |
|
|
|
| 5 (SEPARATOR) |
- |
|
|
|
| 6 (COVERING) |
- |
|
|
|
| 7 (CONDUCTOR : CONSTRUCTION ) |
- |
|
|
|
| 8 (S E P A R A T O R) |
- |
|
|
|
| 9.1 (C O V E R I N G : Application ) |
- |
|
|
|
| 9.2 (T h i c k n e s s o f C o v e r i n g) |
- |
|
|
|
| 9.3 (T o l e r a n c e on Thickness o f C o v e r i n g) |
- |
|
|
|
| 9.4 (A p p l i c a t i o n of C o v e r i n g) |
- |
|
|
|
| 9.5 (Colour of C o v e r i n g) |
- |
|
|
|
| 10.1 a) 1) (Annealing test - IS 10810: Part 1) |
- |
|
|
|
| 10.1 a) 2) (Conductor resistance tes - IS 10810 : Part 5) |
- |
|
|
|
| 10.1 c) 1) (Physical tests for
covering : Tensile strength ) |
- |
|
|
|
| 10.1 c) 1) (Physical tests for
covering : Elongation at break ) |
- |
|
|
|
| 10.1 c) 2) (Physical tests for
covering - Ageing in Air oven : Tensile strength variation) |
- |
|
|
|
| 10.1 c) 2) (Physical tests for
covering -Ageing in Air oven : Elongation at break ) |
- |
|
|
|
| 10.1 c) 2) (Physical tests for
covering - Ageing in Air oven : Tensile strength ) |
- |
|
|
|
| 10.1 c) 2) (Physical tests for
covering -Ageing in Air oven : Elongation variation at break ) |
- |
|
|
|
| 10.1 c) 5) (Hot set test ) |
- |
|
|
|
| 11.1 (High Voltage Test ( Water Immersion
Test )) |
- |
|
|
|
| 11.4 (Flammability Test) |
- |
|
|
|
| 12.1 (Manufacturer's Identification) |
- |
|
|
|
| 12.2 (Cable Identification) |
- |
|
|
|
| 12.3 (Cable Code) |
- |
|
|
|
|
- |
-
15 m
Excluding except ageing in air bumb, oil resistance test, static flexibility test and chemical tests |
| 12877 |
BIS, Central Laboratory (CL)
| None
| IS 2415 (2015) |
Cycle - Rubber tubes (Moulded/ Jointed) - Specification (Fourth Revision) |
- |
Rs 14270/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1, Table 1 (Classification and Designation) |
- |
|
|
|
| 5.1,3.4, Annex A & Table 2. ( Flat Length ) |
- |
|
|
|
| 5.1,3.5, Annex A & Table 2. (Flat Width) |
- |
|
|
|
| 5.2, Annex A (Thickness) |
- |
|
|
|
| 5.2.1 (Uniformity of Thickness) |
- |
|
|
|
| 6.1,Table 3 (i)Tensile strength:) |
- |
|
|
|
| 6.1,Table 3 (ii)Elongation at break ) |
- |
|
|
|
| 6.2 (iii)Tension set: ) |
- |
|
|
|
| 6.3 (a) ( Ageing Test:- Tensile strength :) |
- |
|
|
|
| 6.3(b) ( Ageing Test :- Elongation at break) |
- |
|
|
|
| 6.4.1 (Joint Adhesion Strength) |
- |
|
|
|
| 6.4.3 ( Strength of splice on moulded tube) |
- |
|
|
|
| 6.5 (Leak Test) |
- |
|
|
|
| 6.6 (Valve Test) |
- |
|
|
|
| 6.7.1 (Manufacture and Workmanship) |
- |
|
|
|
| 6.7.2 (Manufacture and Workmanship) |
- |
|
|
|
| 6.7.3 (Manufacture and Workmanship) |
- |
|
|
|
| 6.7.4 (Manufacture and Workmanship) |
- |
|
|
|
| 7.1 (MARKING) |
- |
|
|
|
|
- |
-
Excluding Valve test |
| 12878 |
BIS, Central Laboratory (CL)
| None
| IS 12866 (1989) |
Plastic translucent sheets made from thermo - Setting polyester resin (Glassfibre Reinforced) - Specification |
- |
1758 View breakup
Rs. 1758/- (only for Acid number, Visual tests and Glass content) + testing charges as per referred ISS.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 6.3 (Water Absorption) |
- |
|
|
|
| 4-4.1-Table 1 ( PROFILES, DIMENSIONS AND
TOLERANCES-Profiles) |
- |
|
|
|
| 4-4.2-Table 1 ( PROFILES, DIMENSIONS AND
TOLERANCES-Profiles - Depth of Corrugation, D ) |
- |
|
|
|
| 4-4.2-Table 1 ( PROFILES, DIMENSIONS AND
TOLERANCES-Profiles - Pitch of Corrugation, P ) |
- |
|
|
|
| 4-4.2-Table 1 ( PROFILES, DIMENSIONS AND
TOLERANCES-Profiles - Overall Width, B) |
- |
|
|
|
| 4-4.2-Table 1 ( PROFILES, DIMENSIONS AND
TOLERANCES-Profiles - Effective Width) |
- |
|
|
|
| 4-4.2-Table 1 ( PROFILES, DIMENSIONS AND
TOLERANCES-Profiles - Minimum Thickness, T) |
- |
|
|
|
| 4-4.2-Table 1 ( PROFILES, DIMENSIONS AND
TOLERANCES-Profiles - Length of Sheet, A) |
- |
|
|
|
| 5-5.1 (WOIRKMANSHlP AND FlNISH) |
- |
|
|
|
| 5-5.2 (WOIRKMANSHlP AND FlNISH) |
- |
|
|
|
| 6-6.1 (PERFORMANCE REQUIREMENTS-Density- The nominal weight of 1.10 + 0·15 mm Thick plain sheet shall be 1.85 kg/sq. m) |
- |
|
|
|
| 6-6.5-Annex D (PERFORMANCE REQUIREMENTS-Bolt Shear Test
-When tested in accordance with Annex D, the arithmetic mean of the loads at which the first tear appears, shall be not less than 375 N. The load at which the first tear appears while testing any one of the specimens, shall be not less than
250 N.
) |
- |
|
|
|
| 6-6.6- Table 2-Annex E (PERFORMANCE REQUIREMENTS-Load Deflection Test-Applicable only to corrugated sheets and flats of curved sheets. Toal Load N
) |
- |
|
|
|
|
- |
-
- |
| 12879 |
BIS, Central Laboratory (CL)
| None
| IS 5382 (2018) |
Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.1 (Dimensional tolerances) |
- |
|
|
|
| 4.2.2 (Imperfections and defects) |
- |
|
|
|
| 4.2.2 (Surface imperfections) |
- |
|
|
|
| 4.2.2 (i)In zones involved in sealing function) |
- |
|
|
|
| 4.2.2 (ii) In zones not involved in sealing function) |
- |
|
|
|
| 4.2.2 (Internal Imperfections) |
- |
|
|
|
| 4.2.3 (Hardness, IRHD from buttons ) |
- |
|
|
|
| 4.2.4 (Tensile strength, MPa) |
- |
|
|
|
| 4.2.5 (Compression set in air) |
- |
|
|
|
| 4.2.5.2 (Compression set at 23 ºC for 72 h) |
- |
|
|
|
| 4.2.5.2 (Compression set at 70 ºC for 24 h) |
- |
|
|
|
| 4.2.5.3 (Low temp compression set at -10 ºC for 72 h) |
- |
|
|
|
| 4.2.6 (Ageing 7 days at 70 ºC) |
- |
|
|
|
| 4.2.6 (Hardness, IRHD from buttons
Tensile strength, %
Elongation at break , %
) |
- |
|
|
|
| 4.2.8 (Volume change in water , max/min
7 days at 70 ºC
) |
- |
|
|
|
| 4.2.10 (Spliced joint) |
- |
|
|
|
|
- |
-
Excluding Stress relaxation in compression, Ozone resistance test, Low Temperature Performance at - 25 Degree C (Optional Test) |
| 12880 |
BIS, Central Laboratory (CL)
| None
| IS 3623 (1978) |
Specification for guide and rubbing ropes (First Revision) |
- |
7212 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Size - IS 3623) |
- |
|
|
|
| 3.2 (Length - IS 3623) |
- |
|
|
|
| 4.3 (Galvanized Test - IS 3623) |
- |
|
|
|
| 5, Table 1, Table 2 (Mass) |
- |
|
|
|
| 5, Table 1, Table 2 Annex B (Minimum Breaking Force - IS 16594
) |
- |
|
|
|
| 6.1-fig-1 (Construction) |
- |
|
|
|
| 6.2.1 (Construction) |
- |
|
|
|
| 7.1 (Workmanship) |
- |
|
|
|
| 7.2 (Joints) |
- |
|
|
|
| 3.1 (Size - IS 3623) |
- |
|
|
|
| 3.2 (Length - IS 3623) |
- |
|
|
|
|
- |
-
- |
| 12881 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 2593 (1984) |
Flexible Cables for Miners' Cap-lamps |
- |
Rs9000/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (CONDUCTOR) |
- |
|
|
|
| 3.1.2 (Resistance test ) |
- |
|
|
|
| 4.1 (INSULATION) |
- |
|
|
|
| 6.1 (SHEATH) |
- |
|
|
|
| 7.1 (Construction : Conductor ) |
- |
|
|
|
| 8.1 (Thickness of Insulation - Average ) |
- |
|
|
|
| 8.1 (Thickness of Insulation - minimum) |
- |
|
|
|
| 9.1 (IDENTIFICATION OF CORES) |
- |
|
|
|
| 10.1 (LAYING UP) |
- |
|
|
|
| 11.1 (SHEATH : Application ) |
- |
|
|
|
| 11.2 (Thickness of Sheath -average ) |
- |
|
|
|
| 12.2 (Thickness of Sheath - Minimum) |
- |
|
|
|
| 11.3 (Coulor of sheath ) |
- |
|
|
|
| 12.1 (OVERALL DIAMETER) |
- |
|
|
|
| 13.1 b) (Annealing test) |
- |
|
|
|
| 13.1 e) 1) (Physical tests for insulation: Tensile strength ) |
- |
|
|
|
| 13.1 e) 1) (Physical tests for insulation: elongation at break ) |
- |
|
|
|
| 13.1 e) 1) (Physical tests for Sheath : Tensile strength ) |
- |
|
|
|
| 13.1 e) 1) (Physical tests for Sheath: elongation at break ) |
- |
|
|
|
| 13.1 e) 2) (Ageing in air oven ( for insulation ) : Tensile Strength ) |
- |
|
|
|
| 13.1 e) 2) (Ageing in air oven ( for insulation ) : Tensile Strength variation ) |
- |
|
|
|
| 13.1 e) 2) (Ageing in air oven ( for insulation ) : elongation variation at break) |
- |
|
|
|
| 13.1 e) 2) (Ageing in air oven ( for insulation ) : elongation variation at break) |
- |
|
|
|
| 14.1 (Voltage test) |
- |
|
|
|
| 14.2 (Flammability test) |
- |
|
|
|
| 14.4 (Checking of overall diameter of cable) |
- |
|
|
|
| 15.1 (MANUFACTURER'S IDENTIFICATION) |
- |
|
|
|
| 16.2 (Marking ) |
- |
|
|
|
| 16.2.1 (Standards Mark ) |
- |
|
|
|
|
- |
-
25 m
Excluding except ageing in oxygen bomb (for insulation)/air bomb(for sheath), oil resistance test(for sheath), test on centre strain cord, Copper and Manganese Content and resistance of sheath to fatty acids |
| 12882 |
BIS, Central Laboratory (CL)
| None
| IS 5487 (1992) |
Metal polish, liquid - Specification (First Revision) |
- |
Rs.4800.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.8, Table-1 (vi) (Oleic acid content, IS 5487 ) |
- |
|
|
|
| 4.8, Table-1 (v) (Flash point (Abel), IS 1448 Part-20) |
- |
|
|
|
| 4.8, Table-1 (iv) (Cyanides, IS 5487) |
- |
|
|
|
| 4.8, Table-1 (iii) (Residue on 75miron IS Sieve, IS 5487) |
- |
|
|
|
| 4.8, Table-1 (ii) (Total ammonia (as NH3), IS 5487) |
- |
|
|
|
| 4.8, Table-1 (i) (Total solids (excluding oils and fatty matter), IS 5487) |
- |
|
|
|
| 4.7 (Keeping Quality, IS 5487) |
- |
|
|
|
| 4.6 (Acidity of the Aqueous Extract, IS 5487) |
- |
|
|
|
| 4.5 (Polishing Property, IS 5487) |
- |
|
|
|
| 4.4 (Stability, IS 5487) |
- |
|
|
|
| 4.3 (Consistency, IS 5487 ) |
- |
|
|
|
| 4.8, Table-1 (v) (Flash point (Abel), IS 1448 Part-20) |
- |
|
|
|
| Clause No. 4.1 (Composition) |
- |
|
|
|
| Clause No.4.2 (Odour) |
- |
|
|
|
| Clause No.4.3 (Consistency) |
- |
|
|
|
| Clause No.4.4 (Stability) |
- |
|
|
|
| Clause No.4.5 (Polishing Property) |
- |
|
|
|
| Clause No.4.6 (Acidity of the Aqueous Extract) |
- |
|
|
|
| Clause No. 4.8, Table No. 1, SI. No.1 (Total solids ( excluding oils and
fatty matter )) |
- |
|
|
|
| Clause No. 4.8, Table No. 1, SI. No.2 (Total ammonia ( as NH3)) |
- |
|
|
|
| Clause No. 4.8, Table No. 1, SI. No.3 (Residue on 75miron IS Sieve) |
- |
|
|
|
| 4.8, Table-1 (iv) (Cyanides, IS 5487) |
- |
|
|
|
| 4.8, Table-1 (v) (Flash point (Abel), IS 1448 Part-20) |
- |
|
|
|
| 4.8, Table-1 (vi) (Oleic acid content, IS 5487 ) |
- |
|
|
|
|
- |
-
Excluding Cyanides |
| 12883 |
BIS, Central Laboratory (CL)
| None
| IS 6406 (1994) |
Brilliant blue FCF, food grade - Specification (Second Revision) |
- |
Rs.11560.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 Table 1 (Total dye content) |
- |
|
|
|
| 3.1 Table 1 (Combined ether extracts) |
- |
|
|
|
| 3.1 Table 1 (Heavy metals - Lead, ) |
- |
|
|
|
| 3.1 Table 1 (Water-insoluble matter) |
- |
|
|
|
| 3.1 Table 1 (Total dye content) |
- |
|
|
|
| 3.1 Table 1 (Combined ether extracts) |
- |
|
|
|
| 3.1 Table 1 (Heavy metals - Lead, ) |
- |
|
|
|
| 3.1 Table 1 (Water-insoluble matter) |
- |
|
|
|
|
- |
-
500 gm x 3
Excluding Table .1 Cl.3.1 (2)(4)(5)(6) 2. Loss on drying at 135°C, percent by mass, and chlorides and sulphates expressed as sodium salt 5. Subsidiary Dyes 6. Dye intermediates |
| 12884 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 9873 : Part 3 (2017) |
Safety of toys: Part 3 migration of certain elements (Second Revision) |
- |
Rs.14080/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
| 4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
|
|
|
|
- |
-
Complete, except- cl 13 RADIOGRAPHIC EXAMINATION |
| 12885 |
BIS, Central Laboratory (CL)
| None
| IS 878 (2008) |
Laboratory glassware - Graduated measuring cylinders (Second Revision) |
- |
Rs.4200/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table-1 (Nominal capacity) |
- |
|
|
|
| Table-1 (Overall height) |
- |
|
|
|
| Table-1 (Distance from top of scale to top of cylinder) |
- |
|
|
|
| Table-1 (Internal height to highest graduation line) |
- |
|
|
|
| Table-1 (Sub-divisions) |
- |
|
|
|
| Table-1 (capacity at lowest graduation line) |
- |
|
|
|
|
- |
-
Complete for chemical
Excluding Cl. 11 Accuracy Test and Cl. 7 Maximum permissible error |
| 12886 |
BIS, Central Laboratory (CL)
| None
| IS 1237 (2012) |
Cement Concrete Flooring Tiles - Specification |
- |
Rs 4500/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 12.2 (Concavity & Convexity ) |
- |
|
|
|
| Cl 12.3 (The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.) |
- |
|
|
|
| Cl 12.4 (Shall not exceed 1 percent of the length of the edge.) |
- |
|
|
|
| Cl 12.5 (Water absorption) |
- |
|
|
|
| Cl 11 (Suface Finish) |
- |
|
|
|
| Cl 7.1 (Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer) |
- |
|
|
|
| Cl 7.1 (Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer) |
- |
|
|
|
| Cl 12.6 (Wet transverse strength ) |
- |
|
|
|
|
- |
-
Excluding Resistance of wear |
| 12887 |
BIS, Central Laboratory (CL)
| None
| IS 8471 (2003) |
Acetylene generators - Requirements (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1 (MATERIAL AND PROTECTIVE COATING) |
- |
|
|
|
| 7.2 (MATERIAL AND PROTECTIVE COATING) |
- |
|
|
|
| Cl. 7.1 (Carbon) |
- |
|
|
|
| Cl. 7.1 (Silicon) |
- |
|
|
|
| Cl. 7.1 (Manganese) |
- |
|
|
|
| Cl. 7.1 (Phosphorous) |
- |
|
|
|
| Cl. 7.1 (Sulphur) |
- |
|
|
|
| Cl. 7.1 (Vanadium) |
- |
|
|
|
| Cl. 7.1 (Niobium) |
- |
|
|
|
| Cl. 7.1 (Titanium) |
- |
|
|
|
| Cl. 7.1 (Aluminium) |
- |
|
|
|
| Cl. 7.1 (Nitrogen) |
- |
|
|
|
| Cl. 7.1 (Nickel) |
- |
|
|
|
| Cl. 7.1 (Chromium) |
- |
|
|
|
| Cl. 7.1 (Molybdenum) |
- |
|
|
|
| Cl. 7.1 (Copper) |
- |
|
|
|
| Cl. 7.1 (V+Nb+Ti) |
- |
|
|
|
| Cl. 7.1 (CE) |
- |
|
|
|
| Cl. 7.1 (Boron) |
- |
|
|
|
|
- |
-
- |
| 12888 |
BIS, Central Laboratory (CL)
| None
| IS 4964 (2013) |
Textiles – Vests, cotton, plain (Single jersey) knitted – Specification (fifth revision) |
- |
testing charges for the product are Rs 6400/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4/4.1 (MANUFACTURE AND FINISH- Fabric-see IS 9469) |
- |
|
|
|
| 4/4.1/4.1.1 (MANUFACTURE AND FINISH- Fabric-The mass of the vest-method given in B-5.) |
- |
|
|
|
| 4/4.1/4.1.2 (MANUFACTURE AND FINISH- Fabric-) |
- |
|
|
|
| 4/4.1/4.1.3 (MANUFACTURE AND FINISH- Fabric-) |
- |
|
|
|
| 4/4.2-Fig. 1A, Fig. 1B, Fig. 2A, Fig. 2B, Fig. 3. (MANUFACTURE AND FINISH) |
- |
|
|
|
| 4/4.2/4.2.1 (MANUFACTURE AND FINISH) |
- |
|
|
|
| 4/4.3/4.3.2-according to B-4 (MANUFACTURE AND FINISH-Seams and Stitches-Dimension) |
- |
|
|
|
| 4/4.3/4.3.3 (MANUFACTURE AND FINISH-Seams and Stitches) |
- |
|
|
|
| 4/4.4 (MANUFACTURE AND FINISH) |
- |
|
|
|
| 4/4.6 (MANUFACTURE AND FINISH-Freedom from Defects) |
- |
|
|
|
| 5/5.1-Tables 2 and 3 (REQUIREMENTS-Dimensions-method
prescribed in Annex B.) |
- |
|
|
|
|
- |
-
Excluding Table 4: Rubbing, , 4.1 Fabric |
| 12889 |
BIS, Central Laboratory (CL)
| None
| IS 2888 (2004) |
Toilet soap - Specification (Third Revision) |
- |
- View breakup
Rs. 4050/- each for Gr.1 & Gr.2 Rs. 4700/- for Gr.3
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.5, Table-1 (vii), Grade-3 (Lather) |
- |
|
|
|
| 5.5, Table-1 (vii), Grade-2 (Lather) |
- |
|
|
|
| 5.5, Table-1 (vii), Grade-1 (Lather) |
- |
|
|
|
| 5.5, Table-1 (vi), Grade-1, Grade-2 & Grade-3 (Free carbonated alkali) |
- |
|
|
|
| 5.5, Table-1 (v), Grade-1, Grade-2 & Grade-3 (Chloride (as sodium chloride), IS 286) |
- |
|
|
|
| 5.5, Table-1 (iv), Grade-2 & Grade-3 (Matter insoluble in alcohol, IS 286) |
- |
|
|
|
| 5.5, Table-1 (iv), Grade-1 (Matter insoluble in alcohol, IS 286) |
- |
|
|
|
| 5.5, Table-1 (iii), Grade-1, Gr-2 & Gr-3 (Free caustic alkali, as sodium hydroxide (NaOH), IS 286) |
- |
|
|
|
| 5.5, Table-1 (ii), Grade-1, Gr-2 & Gr-3 (Rosin acids, percent by mass of total fatty matter, IS 286 ) |
- |
|
|
|
| 5.5, Table-1 (i), Grade-3 (Total fatty matter, IS 286) |
- |
|
|
|
| 5.5, Table-1 (i), Grade-2 (Total fatty matter, IS 286) |
- |
|
|
|
| 5.5, Table-1 (i), Grade-1 (Total fatty matter, IS 286) |
- |
|
|
|
| 5.5, Table-1 (vii), Grade-3 (Lather) |
- |
|
|
|
| 5.5, Table-1 (vii), Grade-2 (Lather) |
- |
|
|
|
| 5.5, Table-1 (vii), Grade-1 (Lather) |
- |
|
|
|
| 5.5, Table-1 (vi), Grade-1, Grade-2 & Grade-3 (Free carbonated alkali) |
- |
|
|
|
| 5.5, Table-1 (v), Grade-1, Grade-2 & Grade-3 (Chloride (as sodium chloride), IS 286) |
- |
|
|
|
| 5.5, Table-1 (iv), Grade-2 & Grade-3 (Matter insoluble in alcohol, IS 286) |
- |
|
|
|
| 5.5, Table-1 (iv), Grade-1 (Matter insoluble in alcohol, IS 286) |
- |
|
|
|
| 5.5, Table-1 (iii), Grade-1, Gr-2 & Gr-3 (Free caustic alkali, as sodium hydroxide (NaOH), IS 286) |
- |
|
|
|
| 5.5, Table-1 (ii), Grade-1, Gr-2 & Gr-3 (Rosin acids, percent by mass of total fatty matter, IS 286 ) |
- |
|
|
|
| 5.5, Table-1 (i), Grade-3 (Total fatty matter, IS 286) |
- |
|
|
|
| 5.5, Table-1 (i), Grade-2 (Total fatty matter, IS 286) |
- |
|
|
|
| 5.5, Table-1 (i), Grade-1 (Total fatty matter, IS 286) |
- |
|
|
|
|
- |
-
Excluding Clause 5.3 Table 1 (vii) Lather |
| 12890 |
BIS, Central Laboratory (CL)
| None
| IS 7098 : Part 3 (1993) |
Cross - Linked polyethylene insulated thermoplastic sheathed cables - Specification: Part 3 for working voltages from 66 kV up to and including 220 kV |
- |
- View breakup
Testing charges for unarmoured XLPE Insulated & PVC sheathed cable (Excluding Bending Test followed by Partial Discharge, Dielectric
power factor, capacitance measurement, Load cycle test followed by P.D measurement , Impulse withstand test followed by H.V. test ) =
Rs.33,370/-
Testing charges for unarmoured XLPE Insulated PE sheathed cable (Excluding Bending Test followed by Partial Discharge, Dielectric power
factor, capacitance measurement, Load cycle test followed by P.D measurement , Impulse withstand test followed by H.V. test ) = Rs.31,000/-
Testing charges for armoured XLPE Insulated PVC sheathed cable (Excluding Bending Test followed by Partial Discharge, Dielectric power
factor, capacitance measurement, Load cycle test followed by P.D measurement , Impulse withstand test followed by H.V. test ) = Rs.35,790/-
Testing charges for armoured XLPE Insulated PE sheathed cable (Excluding Bending Test followed by Partial Discharge, Dielectric power
factor, capacitance measurement, Load cycle test followed by P.D measurement , Impulse withstand test followed by H.V. test ) = Rs.33,420/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (CONDUCTOR) |
- |
|
|
|
| 6 (SCREENING) |
- |
|
|
|
| 8.1 (INNER SHEATH) |
- |
|
|
|
| 8.2 (INNER SHEATH) |
- |
|
|
|
| 8.3 (INNER SHEATH) |
- |
|
|
|
| 9.1 (ARMOUR) |
- |
|
|
|
| 10.1 (OUTER SHEATH) |
- |
|
|
|
| 10.2 (OUTER SHEATH) |
- |
|
|
|
| 11.1 (CONDUCTOR) |
- |
|
|
|
| 11.2 (CONDUCTOR) |
- |
|
|
|
| 12.1 (CONDUCTOR SCREENING ) |
- |
|
|
|
| 12.2 (CONDUCTOR SCREENING ) |
- |
|
|
|
| 13.1 (INSULATION) |
- |
|
|
|
| 13.2 (INSULATION) |
- |
|
|
|
| 14.1 (INSULATION SCREENING) |
- |
|
|
|
| 14.2.1 (INSULATION SCREENING : Non-metallic Part) |
- |
|
|
|
| 14.2.2 (INSULATION SCREENING : Non-metallic Part) |
- |
|
|
|
| 14.2.3 (INSULATION SCREENING : Non-metallic Part) |
- |
|
|
|
| 14.3.1 (INSULATION SCREENING : Metallic Part) |
- |
|
|
|
| 14.3.2 (INSULATION SCREENING : Metallic Part) |
- |
|
|
|
| 14.3.3 (INSULATION SCREENING : Metallic Part) |
- |
|
|
|
| 15.1 (MOISTURE BARRIER) |
- |
|
|
|
| 15.2.1 (Metallic Sheath) |
- |
|
|
|
| 15.2.2 (Metallic Sheath) |
- |
|
|
|
| 16.1 (INNER SHEATH) |
- |
|
|
|
| 16.2 (INNER SHEATH) |
- |
|
|
|
| 17.1 (ARMOUR) |
- |
|
|
|
| 17.2 (ARMOUR) |
- |
|
|
|
| 17.3 (ARMOUR) |
- |
|
|
|
| 17.4 (ARMOUR) |
- |
|
|
|
| 17.5 (ARMOUR) |
- |
|
|
|
| 18.1 (OUTER SHEATH) |
- |
|
|
|
| 18.2 (outer sheath colour) |
- |
|
|
|
| 18.3.1 (Thickness of Outer Sheath : Unarmoured Cables) |
- |
|
|
|
| 18.3.1 (Thickness of Outer Sheath : armoured Cables) |
- |
|
|
|
| 19.1 A) I) (Tests on conductor : Annealing test ( for copper )) |
- |
|
|
|
| 19.1 A) II) (Tests on conductor : Resistance test) |
- |
|
|
|
| 19.1 g)2) i) (PVC sheath : Tensile strength and elongation at break) |
- |
|
|
|
| 19.1 g)2) iii) (PVC sheath : Loss of mass) |
- |
|
|
|
| 19.1 g)2) v) (PVC sheath : Hot deformation test) |
- |
|
|
|
| 19.1 g)2) vi) (PVC sheath : Shrinkage test) |
- |
|
|
|
| 19.1 g)2) vii) (PVC sheath : Thermal stability) |
- |
|
|
|
| 20.7 (Flammabihty test ( for PVC outer
sheathed cables only )) |
- |
|
|
|
| 20.16.2 (Test for Dimensions of Insulation : Test for Eccentricity) |
- |
|
|
|
| 20.16.3 (Test for Dimensions of Insulation : Test for Ovality) |
- |
|
|
|
|
- |
-
Testing facility not available for 1. Bending test followed by P D test 2. Dielectric power factor and capacitance measurement at ambient temperature 3. Dielectric power factor measurement at elevated temperature 4. Load cycle test followed by P.D measurement 5. Impulse withstand test followed by HV test |
| 12891 |
BIS, Central Laboratory (CL)
| None
| IS 4355 (1977) |
Specification for fire-resistant brattice cloth (first revision) |
- |
Please see remarks. View breakup
Rs. 1650/- excluding Fire resistance, Accelerated weathering test, Air permeability, Electrical resistance).
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.3.2 Length and width (The length and width of finshed fabric shall be as agreed between the purchase and the supplier .A Tolerance of - 5% shall be alowed on width) |
- |
|
|
|
| Cl.3.3.1 (The treatment of the base fabric to make it fabric uniformly and adhere firmly to the fabric) |
- |
|
|
|
| Cl.3.3.2 (The treatment material shall penetrate the fabric uniformly and adhere firmly to the fabric.) |
- |
|
|
|
| Cl.3.3.3 (The treated fabric shall have a reasonable durability under all condition of usage ) |
- |
|
|
|
| Cl.3.3.4 (The treated fabric shall have any undesirable odour and shall be non irritant to skin) |
- |
|
|
|
| Cl.3.4.2 (The breaking load of the brattice cloth for wrapway and weftway shall not be leass than 40 Kgf and 20 Kgf respectiveely when tested in accordance with IS 1969-1068 on a specimen of 5 cm width) |
- |
|
|
|
|
- |
-
Excluding TF not available for Fire resistance, Accelerated weathering test, Air permeability, Electrical resistance |
| 12892 |
BIS, Central Laboratory (CL)
| None
| IS 6444 (1979) |
Specification for sulphur dusting powders (First Revision) |
- |
Rs.2100.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2 Table 1 (Sulphur Content, NV upto 9) |
- |
|
|
|
| 2.2 Table 1 (Sulphur Content, NV Above 9 below 50) |
- |
|
|
|
| 2.2 Table 1 (Sulphur Content, NV above 50) |
- |
|
|
|
| 2.2 Table 1 (Material passing through 75 micron sieve) |
- |
|
|
|
| 2.1 (Description) |
- |
|
|
|
| 2.2 Table 1 (Bulk Density after compacting) |
- |
|
|
|
| 2.2 Table 1 (Sulphur Content, NV upto 9) |
- |
|
|
|
| 2.2 Table 1 (Sulphur Content, NV Above 9 below 50) |
- |
|
|
|
| 2.2 Table 1 (Sulphur Content, NV above 50) |
- |
|
|
|
| 2.2 Table 1 (Material passing through 75 micron sieve) |
- |
|
|
|
| 2.1 (Description) |
- |
|
|
|
| 2.2 Table 1 (Bulk Density after compacting) |
- |
|
|
|
| 2.2 Table 1 (Sulphur Content, NV upto 9) |
- |
|
|
|
| 2.2 Table 1 (Sulphur Content, NV Above 9 below 50) |
- |
|
|
|
| 2.2 Table 1 (Sulphur Content, NV above 50) |
- |
|
|
|
| 2.2 Table 1 (Material passing through 75 micron sieve) |
- |
|
|
|
| 2.1 (Description) |
- |
|
|
|
| 2.2 Table 1 (Bulk Density after compacting) |
- |
|
|
|
|
- |
-
- |
| 12893 |
BIS, Central Laboratory (CL)
| None
| IS 651 (2007) |
Glazed stoneware pipes and fittings - Specification (Sixth Revision) |
- |
Rs. 6850/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (GENERAL QUALITY) |
- |
|
|
|
| 5.2(a) (GENERAL QUALITY) |
- |
|
|
|
| 5.2(b) (GENERAL QUALITY) |
- |
|
|
|
| 5.2(c) (GENERAL QUALITY) |
- |
|
|
|
| 6 ( GLAZING) |
- |
|
|
|
| 7.2 (Hydraulic Test) |
- |
|
|
|
| 7.3 (Absorption Test) |
- |
|
|
|
| 10.1-Table 1 (INTERNAL DIAMETER) |
- |
|
|
|
| 10.1-Table 1 (Class) |
- |
|
|
|
| 11.1-Table 1 (
Mean Thickness of Barrel and of Socket) |
- |
|
|
|
| 14-Table 1 (Internal Depth of Socket) |
- |
|
|
|
| 14-Table 2 (Excess Shoulder Measurment) |
- |
|
|
|
| 14-Table 3 (Length of Grooving of Spigot) |
- |
|
|
|
| 12.4 (Permissible Deviation from Straightness) |
- |
|
|
|
| 12.2 (STRAIGHTNESS OF BARRELS OR STRAIGHT AND TAPER PIPES-Length of Junction) |
- |
|
|
|
| 13.1-Table 2 (Dimensions of One-Quarter Bends-Internal Diameter) |
- |
|
|
|
| 13.1-Table 2 (Dimensions of One-Quarter Bends-r) |
- |
|
|
|
| 13.1-Table 2 (Dimensions of One-Quarter Bends-angle) |
- |
|
|
|
| 13.1-Table 3 (Dimensions of One-Eighth Bends--Internal Diameter) |
- |
|
|
|
| 13.1-Table 3 (Dimensions of One-Eighth Bends-r) |
- |
|
|
|
| 13.1-Table 3 (Dimensions of One-Eighth Bends-angle) |
- |
|
|
|
| 13.1-Table 4 (Dimension of One-Sixteenth Bends-Internal Diameter) |
- |
|
|
|
| 13.1-Table 4 (Dimension of One-Sixteenth Bends-r) |
- |
|
|
|
| 13.1-Table 4 (Dimension of One-Sixteenth Bends-angle) |
- |
|
|
|
|
- |
-
Complete for chemical |
| 12894 |
BIS, Central Laboratory (CL)
| None
| IS 16333 : Part 3 (2017) |
Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (Inputting of text) |
- |
|
|
|
| 5.2 (Message Readability) |
- |
|
|
|
|
- |
-
- |
| 12895 |
BIS, Central Laboratory (CL)
| None
| IS 2980 (1999) |
Non - Pressure stoves - Specification (Third Revision) |
- |
- View breakup
Rs. 5400/- and Material testing charges as per respective Iss
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.0 (MATERIAL) |
- |
|
|
|
| 5.1 (construction of the stoves) |
- |
|
|
|
| 5.2 (Fuel Leakage) |
- |
|
|
|
| 5.3 (Fuel container) |
- |
|
|
|
| 5.4 (Knob fro winding) |
- |
|
|
|
| 5.5 (Various components of stoves of one make) |
- |
|
|
|
| 5.6 (Perforated Sleeves) |
- |
|
|
|
| 5.8 (For Single-Wick and Multi-Wick Stoves) |
- |
|
|
|
| 6.2 (Thermal Efficiency Test) |
- |
|
|
|
| 6.3 (Combustion Efficiency) |
- |
|
|
|
| 6.4 (Flame Stability Test) |
- |
|
|
|
| 6.5 (Fuel Creep) |
- |
|
|
|
| 6.6 (Surface Temperature Test) |
- |
|
|
|
| 6.7 (Fuel Temperature Test) |
- |
|
|
|
| 6.8 (Flame Flash-Back Test) |
- |
|
|
|
| 6.9 (Stability Test) |
- |
|
|
|
|
- |
-
- |
| 12896 |
BIS, Central Laboratory (CL)
| None
| IS 2039 : Part 1 to 3 (1991) |
Steel tubes for bicycle and cycle rickshaws - Specification (Second Revision) |
- |
Rs.4320.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 6.1 (Workmanship) |
- |
|
|
|
| Cl. 6.2 (Fin Height) |
- |
|
|
|
| Cl. 6.3 (Straightness) |
- |
|
|
|
| Cl. 8.1 (Tensile Strength) |
- |
|
|
|
| Cl. 8.1 (Yield Strength) |
- |
|
|
|
| Cl. 8.1 (Elongation) |
- |
|
|
|
| Cl. 8.2 (Drift Expansion Test- IS 2335) |
- |
|
|
|
| Cl. 8.3 (Flattening Test-IS 2338) |
- |
|
|
|
| Cl. 9 (Diameter) |
- |
|
|
|
| Cl. 9 (Thickness) |
- |
|
|
|
| Cl. 3.2.1, Table 4 (Yield Stress) |
- |
|
|
|
| Cl. 3.2.1, Table 4 (UTS) |
- |
|
|
|
| Cl. 3.2.1, Table 4 (Elongation) |
- |
|
|
|
| Cl. 3.2.2, Table 2 (Drift Expansion Test- IS 2335) |
- |
|
|
|
| Cl. 3.2.3, Table 3 (Flattening Test-IS 2338) |
- |
|
|
|
| Cl. 4.2.1 (Diameter) |
- |
|
|
|
| Cl. 4.2.2 (Thickness) |
- |
|
|
|
| Cl. 4.2.3 (Length) |
- |
|
|
|
| Cl. 4.2.1, Table 7 (Yield Stress) |
- |
|
|
|
| Cl. 4.2.1, Table 7 (UTS) |
- |
|
|
|
| Cl. 4.2.2, Table 8 (Drift Expansion Test- IS 2335) |
- |
|
|
|
| Cl. 4.2.3, Table 9 (Flattening Test-IS 2338) |
- |
|
|
|
| Cl. 5.2.1, Table 10 (Diameter) |
- |
|
|
|
| Cl. 5.2.2 (Mean Thickness) |
- |
|
|
|
| Cl. 5.2.3, Table 6 (Length) |
- |
|
|
|
| Cl. 5.1 Table 1 (Carbon) |
- |
|
|
|
| Cl. 5.1 Table 1 (Silicon) |
- |
|
|
|
| Cl. 5.1 Table 1 (Manganese) |
- |
|
|
|
| Cl. 5.1 Table 1 (Phosphorous) |
- |
|
|
|
| Cl. 5.1 Table 1 (Sulphur) |
- |
|
|
|
|
- |
-
- |
| 12897 |
BIS, Central Laboratory (CL)
| None
| IS 2257 (1989) |
Paper adhesives, liquid gum and office paste type - Specification (Third Revision) |
- |
Rs 5280/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.2 Table 1 (v) (Keeping Quality ) |
- |
|
|
|
| Clause 4.2 Table 1 (v) (Stability at 37°C) |
- |
|
|
|
| 4.1 (Description) |
- |
|
|
|
| Clause 4.2 Table 1 (iv) (Brittleness and moisture absorption of the dried film) |
- |
|
|
|
| Clause 4.2 Table 1 (ii) (pH) |
- |
|
|
|
| Clause 4.2 Table 1 (i) (Total Solid) |
- |
|
|
|
| 4.3 (Keeping quality) |
- |
|
|
|
| Table 1 (i), 4.2 (Total solids) |
- |
|
|
|
| Table 1 (ii), 4.2 (pH value) |
- |
|
|
|
| Table 1 (iv), 4.2 (brittleness and moisture absorption of the dried film) |
- |
|
|
|
| Table 1 (v), 4.2 (stability at 37C) |
- |
|
|
|
|
- |
-
- |
| 12898 |
BIS, Central Laboratory (CL)
| None
| IS 1891 : Part 1 (1994) |
Conveyor and elevator textile belting - Specification: Part 1 general purpose belting (Fourth Revision) |
- |
6600 View breakup
Rs. 6600/- excluding abrasion loss and troughability.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 14.2.2 (Elongation at breaking load) |
- |
|
|
|
| 14.2.1 (Elongation at reference load) |
- |
|
|
|
| 14.1 (Full thickness breaking strength) |
- |
|
|
|
| 13.2 (Width) |
- |
|
|
|
| 13.1 (Length) |
- |
|
|
|
| 8.2 (Carcass Thickness) |
- |
|
|
|
| 8.1 (Cover Thickness) |
- |
|
|
|
| 7.4 (Rubber cover abrasion) |
- |
|
|
|
| 7.3 (Cover Elongation at break heat Ageing) |
- |
|
|
|
| 7.3 (Cover tensile strength heat Ageing) |
- |
|
|
|
| 7.2 (Thickness) |
- |
|
|
|
| 7.1 (Cover Elongation at break) |
- |
|
|
|
| 7.1 (Cover tensile strength) |
- |
|
|
|
|
- |
-
- |
| 12899 |
BIS, Central Laboratory (CL)
| None
| IS 539 (1974) |
Specification for naphthalene (Second Revision) |
- |
- View breakup
i) For Grade1 = 8.5X300 + 15.5X 9 + 800 = 3489 /- (Rounded off Rs.3490/-)
ii) For Grade2 = 13.5X300 + 20X9 + 1100 = 5330/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.3 Table 1 (Ash, all grades) |
- |
|
|
|
| 4.3 Table 1 (Matter Insoluble in Benzene, all grades) |
- |
|
|
|
| 4.3 Table 1 (Non-volatile matter, all grades) |
- |
|
|
|
| 4.3 Table 1 (Moisture, all grades) |
- |
|
|
|
| 4.3 Table 1 (Crystallization point, Grade 2) |
- |
|
|
|
| 4.3 Table 1 (Crystallization point, Grade 1) |
- |
|
|
|
| 4.1.1 (Description, Grade 1) |
- |
|
|
|
| 4.1.2 (Description, Grade 2) |
- |
|
|
|
| 4.3 Table 1 (Total Sulphur, Grade 2) |
- |
|
|
|
| 4.2 (Test for Staining) |
- |
|
|
|
| 4.3 Table 1 (Colour, grade 1) |
- |
|
|
|
| 4.3 Table 1 (Colour, grade 2) |
- |
|
|
|
| 4.3 Table 1 (Acid wash Test, Grade 1) |
- |
|
|
|
| 4.3 Table 1 (Ash, all grades) |
- |
|
|
|
| 4.3 Table 1 (Matter Insoluble in Benzene, all grades) |
- |
|
|
|
| 4.3 Table 1 (Non-volatile matter, all grades) |
- |
|
|
|
| 4.3 Table 1 (Moisture, all grades) |
- |
|
|
|
| 4.3 Table 1 (Total Sulphur, Grade 2) |
- |
|
|
|
| 4.3 Table 1 (Crystallization point, Grade 2) |
- |
|
|
|
| 4.3 Table 1 (Crystallization point, Grade 1) |
- |
|
|
|
| 4.1.1 (Description, Grade 1) |
- |
|
|
|
| 4.1.2 (Description, Grade 2) |
- |
|
|
|
| 4.2 (Test for Staining) |
- |
|
|
|
|
- |
-
- |
| 12900 |
BIS, Central Laboratory (CL)
| None
| IS 2547 : Part 1 (1976) |
Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters |
- |
- View breakup
i) Plaster of paris (Type A) 18x300 = Rs.5400.00
(Type B) 22x300 = Rs.6600.00
ii) Anhydrous Gypsum Plaster 14x300 = Rs.4200.00
iii) Keene’s Plaster 16x300 = Rs.4800.00
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.1, Table-1 (Beta hemihydrate, SO3) |
- |
|
|
|
| Clause 4.1, Table-1 (Beta hemihydrate, CaO) |
- |
|
|
|
| Clause 4.1, Table-1 (Beta hemihydrate, Soluble magnesium salts as MgO) |
- |
|
|
|
| Clause 4.1, Table-1 (Beta hemihydrate, Soluble sodium salts as Na2O) |
- |
|
|
|
| Clause 4.1, Table-1 (Beta hemihydrate,. Loss of ignition) |
- |
|
|
|
| Clause 4.1, Table-1 (Retarded Hemihydrate Gypsum Plaster, SO3) |
- |
|
|
|
| Clause 4.1, Table-1 (Retarded Hemihydrate Gypsum Plaster, CaO) |
- |
|
|
|
| Clause 4.1, Table-1 (Beta hemihydrate, Soluble magnesium salts as MgO) |
- |
|
|
|
| Clause 4.1, Table-1 (Retarded Hemihydrate Gypsum Plaster, Soluble sodium salts as Na2O) |
- |
|
|
|
| Clause 4.1, Table-1 (Retarded Hemihydrate Gypsum Plaster, Loss of ignition) |
- |
|
|
|
| Clause 4.1, Table-1 (Retarded Hemihydrate Gypsum Plaster, Free lime) |
- |
|
|
|
| Clause 4.1, Table-1 (Anhydrous Gypsum plaster,. SO3) |
- |
|
|
|
| Clause 4.1, Table-1 (Anhydrous Gypsum plaster,. CaO) |
- |
|
|
|
| Clause 4.1, Table-1 (Anhydrous Gypsum plaster,. Soluble magnesium salts as MgO) |
- |
|
|
|
| Clause 4.1, Table-1 (Anhydrous Gypsum plaster,. Soluble sodium salts as Na2O) |
- |
|
|
|
| Clause 4.1, Table-1 (Anhydrous Gypsum plaster,. Loss on ignition) |
- |
|
|
|
| Clause 4.1, Table-1 (Keene's Plaster, SO3) |
- |
|
|
|
| Clause 4.1, Table-1 (Keene's Plaster, CaO) |
- |
|
|
|
| Clause 4.1, Table-1 (Keene's Plaster, Soluble magnesium salts as MgO) |
- |
|
|
|
| Clause 4.1, Table-1 (Keene's Plaster, Soluble sodium salts as Na2O) |
- |
|
|
|
| Clause 4.1, Table-1 (Keene's Plaster, Loss of ignition) |
- |
|
|
|
| Clause 4.1, Table-1 (Beta hemihydrate, SO3) |
- |
|
|
|
| Clause 4.1, Table-1 (Beta hemihydrate, CaO) |
- |
|
|
|
| Clause 4.1, Table-1 (Beta hemihydrate, Soluble magnesium salts as MgO) |
- |
|
|
|
| Clause 4.1, Table-1 (Beta hemihydrate, Soluble sodium salts as Na2O) |
- |
|
|
|
| Clause 4.1, Table-1 (Beta hemihydrate,. Loss of ignition) |
- |
|
|
|
| Clause 4.1, Table-1 (Retarded Hemihydrate Gypsum Plaster, SO3) |
- |
|
|
|
| Clause 4.1, Table-1 (Retarded Hemihydrate Gypsum Plaster, CaO) |
- |
|
|
|
| Clause 4.1, Table-1 (Beta hemihydrate, Soluble magnesium salts as MgO) |
- |
|
|
|
| Clause 4.1, Table-1 (Retarded Hemihydrate Gypsum Plaster, Soluble sodium salts as Na2O) |
- |
|
|
|
| Clause 4.1, Table-1 (Retarded Hemihydrate Gypsum Plaster, Loss of ignition) |
- |
|
|
|
| Clause 4.1, Table-1 (Retarded Hemihydrate Gypsum Plaster, Free lime) |
- |
|
|
|
| Clause 4.1, Table-1 (Anhydrous Gypsum plaster,. SO3) |
- |
|
|
|
| Clause 4.1, Table-1 (Anhydrous Gypsum plaster,. CaO) |
- |
|
|
|
| Clause 4.1, Table-1 (Anhydrous Gypsum plaster,. Soluble magnesium salts as MgO) |
- |
|
|
|
| Clause 4.1, Table-1 (Anhydrous Gypsum plaster,. Soluble sodium salts as Na2O) |
- |
|
|
|
| Clause 4.1, Table-1 (Anhydrous Gypsum plaster,. Loss on ignition) |
- |
|
|
|
| Clause 4.1, Table-1 (Keene's Plaster, SO3) |
- |
|
|
|
| Clause 4.1, Table-1 (Keene's Plaster, CaO) |
- |
|
|
|
| Clause 4.1, Table-1 (Keene's Plaster, Soluble magnesium salts as MgO) |
- |
|
|
|
| Clause 4.1, Table-1 (Keene's Plaster, Soluble sodium salts as Na2O) |
- |
|
|
|
| Clause 4.1, Table-1 (Keene's Plaster, Loss of ignition) |
- |
|
|
|
|
- |
-
Test method is not specified.
Excluding Table 1,Clause 4.1 ,sl. no.(iii)&(iv) , soluble Mgo & Na2o salts. |
