BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

12901

BIS, Central Laboratory (CL)

None

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

Rs.6900/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 Annex E (Water Potability test (after 30 Days) a) Taste b) Odour)	-
6.1.7 IS: 9845:1998 (Migration- a. Amount of extractive )	-
7.5 Annex J (Product resistance test for printed pouches)	-
7.4 Annex H (Ink adhesion test for printed pouches)	-
7.3 Annex G (Drop test )	-
7.2 Annex F (Stack Load test)	-
6.1.10 Annex -6 of IS:2508:2016 (Dart impact Resistance)	-
6.1.9 Annex 4 of IS:2508:2016 (Elongation at break - b. Crosswise direction)	-
6.1.9 Annex 4 of IS:2508:2016 (Elongation at break - a. Lengthwise direction)	-
6.1.8 Annex 4 of IS:2508:2016 (Tensile Strength b. Crosswise direction)	-
6.1.8 Annex 4 of IS:2508:2016 (Tensile Strength a. Lengthwise direction)	-
6.1.6 (Width)	-
6.1.5 A-2 of IS: 2508:2016 (Thickness)	-
6.1.4 (Odour)	-
6.1.3 (Winding of the Film )	-
6.1.2 (Film Form)	-
6.1.1 (Description)	-
5 (Material)	-
Cl. 7.1 (Vibration Leakage Test)	-

-
3L Complete for chemical Excluding 6.1.8 Tensile Strength, 6.1.9 Elongation at Break, 6.1.10 Dart Impact Resistance

12902

BIS, Central Laboratory (CL)

None

IS 15914 (2011)

High tensile strength flat rolled steel plate (Up To 6 Mm), sheet and strip for the manufacture of welded gas cylinder - Specification

Rs. 7760/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 (UTM)	-
Cl 9 (Workmanship)	-
Cl 10 (Length, Width & Thickness)	-
Cl. 7 Table 3 (Elongation)	-
Cl. 7 Table 3 (Yield Stress)	-
6.0 (CARBON)	-
6.0 (SULPHUR)	-
6.0 (PHOSPHORUS)	-
6.0 (MANGANESE)	-
6.0 (SILICON)	-
6.0 (ALUMINIUM)	-
6.0 (NITROGEN)	-
6.0 (MICRO ALLOYING)	-

-
-

12903

BIS, Central Laboratory (CL)

None

IS 7123 (2019)

Hair oils - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause no 4.4/Annex A (A-3) (4 Examination)	-
Clause 4.5 (Peroxide Value)	-
Clause 4.6 (Arsenic Oxide)	-
Clause 4.6 (Lead)	-
Clause 4.3 (Acid Value)	-
Clause 4.1 (Description)	-
4.3, A-2.2 (Acid value)	-
4.5, A-4 (Peroxide value)	-
4.6, A-4 (Heavy metals)	-

-
-

12904

BIS, Central Laboratory (CL)

None

IS 4457 (2007)

Ceramic unglazed vitreous acid resisting tiles - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (MANUFACTURE)	-
5-Table 1(i)-a (REQUIREMENTS-Dimensions and Surface Quality-Length)	-
5-Table 1(i)-a (REQUIREMENTS-Dimensions and Surface Quality-Width)	-
5-Table 1(i)-b (REQUIREMENTS-Dimensions and Surface Quality-Thickness)	-
5-Table 1(ii) (REQUIREMENTS-Surface Quality)	-

-
-

12905

BIS, Central Laboratory (CL)

None

IS 3104 : Part 1 (1982)

Specification for density hydrometers: Part 1 requirements (First Revision)

Rs. 4800/- excluding accuracy test. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.11.2 ( Stem diameter of the hydrometers shall be not less than 40 mm.)	-
Cl.9.1 Bulb and Stem ( — The bulb and the stem shall be made of a suitable transparent glass, selected and processed to be as free as possible from stress and visible defects, and having a coefficient of cubical thermal expansion of (25 ± 2) × 10-6 (°C)-)	-
Cl.9.2 Loading Material ( — The loading material shall be fixed in the bottom of the hydrometer. After the finished hydrometer has been kept in a horizontal position for 1 h at 80°C and subsequently cooled in that position, the instrument shall meet the requirements of 10.3.)	-
Cl.9.3 Scale Strip ( — The strip on which the scale and inscriptions are marked shall have a smooth matt surface. The strip shall show no evidence of charring, and shall not become discoloured or distorted when the stem is exposed for 1 h to a temperature of 80°C.)	-
Cl.10.1 workmanshisp and finish ( The outer surface of the hydrometers shall be symmetrical about the main axis)	-
Cl.10.2 ( There shall be no abrupt changes in their cross section ( see Fig, 1 ))	-
Cl.10.3 ( The cross-section of the stem shall remain unchanged for at least 5 mm below the lowest graduation line on ??? scale.)	-
Cl.10.4 (The stem shall extend unchanged in diameter at least 15 mm above the uppermost graduation line on the scale.)	-
Cl.10.5 ( The hydrometer shall float with its axis vertical to within 1.5° of arc.)	-
Cl.10.6 (There shall be no loose material in the instrument)	-
Cl.10.7 ( The strip on which the scale and inscriptions are marked shall remain securely fastened in place at the temperature of use ( see 9.3 ).)	-
Cl.10.8 ( The scale shall be straight and without twist.)	-
Cl.10.9 ( Appropriate means shall be incorporated for ensuring that any displacement of the scale or of the strip bearing the scale is readily apparent.)	-
Cl.11.1 ( The dimensions of the hydrometers shall conform to the requirements given in Table 1.)	-
Cl.12.2 Cl.12.2.1 Graduation Lines ( The graduation lines shall be distinct and of uniform thickness not exceeding 0 2 mm or one-fifth of the distance between the centres of adjacent lines, whichever is less. For the SP series, the thickness of the graduation lines shall not exceed 0.2 mm or one-sixth of the distance between the centres of adjacent lines, whichever is less.)	-
Cl.12.2.2 (There shall be no evident local irregularities in the spacing of the graduation lines.)	-
Cl.12.2.3 ( The graduation lines shall be perpendicular to the axis of the hydrometer.)	-
Cl.12.2.4 (The short, medium and long scale lines shall extend, respectively, at least one-fifth, one-third and one-half of the way round the circumference of the stem.)	-
Cl.12.2.5 ( The highest and lowest graduation lines indicating the nominal limits of the scale shall be long lines ( see 12.3.1, 12.3.2 and 12.3.3 ).)	-
Cl.12.2.6 ( The short, medium and long lines shall each be vertically disposed so that either the mid-points, or the right hand ends or the left hand ends of all graduation lines He on an imaginary line parallel to the axis of the instrument. In the latter two cases, the vertical line may, alternatively, be marked.)	-
Cl.12.3.1 Sequence of Graduation Lines ( On hydrometer scales whose smallest interval is 1 kg/m3 or 1 g/ml:)	-
Cl.12.3.2 ( On hydrometer scales whose smallest interval is 2 kg/m3, or 2 g/ml)	-
Cl.12.3.3 ( On hydrometer scales whose smallest interval is 5 kg/m3 or 5 g/ml:)	-
Cl.12.4 Figuring of Graduation Lines Cl.12.4.0 ( The scale lines and inscriptions should preferably be black and shall be clearly and durably marked.)	-
Cl.12.4.1 ( The scale shall have only one set of numbers and the last digits of the numbers shall be vertically aligned ( see Fig. 2 ).)	-
Cl.12.4.2 ( The scale shall be so figured as to enable the value corresponding to any graduation line to be readily identified.)	-
Cl.12.4.3 ( The highest and lowest graduation lines of the nominal limits shall be figured in full.)	-
Cl.12.4.4 ( At least every tenth line shall be figured)	-
Cl.12.4.5 ( For density values expressed in grams per cubic centimetres, the decimal sign shall be included for numbers expressed in full, but may be omitted from abbreviated numbers.)	-
Cl.12.5 Extension of Scale ( — The scale shall be extended beyond the nominal scale limits, as indicated in col 12 of Table 1.)	-
3.0 (BASIS OF SCALE)	-
4.1 (Series)	-
4.2 (Ranges)	-
5.0 (REFERENCE TEMPERATURE)	-
6.0 (SURFACE TENSION)	-
7.0 (REFERENCE LEVELS FOR ADJUSTMENT AND READING)	-
8.0 (IMMERSION)	-
11.1, 12.5, Table 1 (SERIES)	-
11.1, 12.5, Table 1 (MAXIMUM TOTAL LENGTH)	-
11.1, 12.5, Table 1 (NOMINAL RANG E OF EACH HYDROMETER)	-
11.1, 12.5, Table 1 (NUMBER OF SCALE DIVISIONS × VALU E OF THE SCALE INTERNAL, g/ml)	-
11.1, 12.5, Table 1 (NUMBER OF SCALE DIVISIONS × VALU E OF THE SCALE INTERNAL, kg/m3)	-
11.1, 12.5, Table 1 (NUMBER OF SCALE DIVISIONS × VALU E OF THE SCALE INTERNAL, g/ml)	-
11.1, 12.5, Table 1 (MINIMUM SCALE LENGTH (NOMINAL RANGE))	-
11.1, 12.5, Table 1 (BULB DIA - METER, Max.)	-
11.1, 12.5, Table 1 (BULB DIA - METER, Min.)	-
11.1, 12.5, Table 1 (VOLUME BELOW LOWEST GRADUATIO N LIN E OF NOMINAL RANGE, Max.)	-
11.1, 12.5, Table 1 (VOLUME BELOW LOWEST GRADUATIO N LIN E OF NOMINAL RANGE, Min.)	-
11.1, 12.5, Table 1 (EXTENSION OF SCALE AT EACH AND BEYOND UPPER AND LOWER NOMINAL LIMITS)	-
12.0 (General)	-
12.1 (Recommended scales)	-

-
No chemical requirements. Excluding Cl13. ACCURACY

12906

BIS, Central Laboratory (CL)

None

IS 13620 (1993)

Fusion Bonded Epoxy Coated Reinforcing Bars -

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Carbon- IS 228(Part 1))	-
4.1 (Sulphur- IS 228(Part 9))	-
4.1 (Phosphorous- IS 228(Part 3))	-
4.1 (Nitrogen- IS 228(P-19))	-
4.1 (Sulphur & Phosphorous)	-
4.1 (Carbon Equivalent)	-
Cl 7.1 (Coating Thickness)	-
Cl 7.1 (Coating Thickness)	-

-
-

12907

BIS, Central Laboratory (CL)

None

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4 ( Designation)	-
Cl 7 (Dimensions Of Pipes)	-
Cl 8 (Visual Appearance)	-
Cl 9.3 (Reversion Test )	-
Cl 9.5 (Density)	-
Cl 9.6 (Melt Flow Rate)	-

-
Excluding Test Facility not available for Cl.9.1 Hydraulic characterestics(Internal, creep, rupture), Cl 9.4 Impact Strength

12908

BIS, Central Laboratory (CL)

None

IS 12916 (1990)

Acephate SP- Specification

Rs.2000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.3.1 Table 1 i (Acephate Content)	-
3.3.1 Table 1 ii (Acidity (as H2SO4))	-

-
-

12909

BIS, Central Laboratory (CL)

None

IS 4521 (2001)

Wire ropes used in oil wells and oil well drilling - Specification (Second Revision)

Rs.7750/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (tables 1 to 10) (Size)	-
5 (tables 1 to 10) (Minimum Breaking Force)	-
6 (General Requirements)	-
6.1 (GENERAL)	-
6.2 (Core)	-
6.3 (Joints)	-
6.4 (Mass)	-
6.5 (Lay of the Rope)	-
6.6 (Length of Lay)	-
7 (Galvanizing)	-
8 (Lubrication)	-
6 (General Requirements)	-
Clause - 4 (CARBON)	-
Clause - 4 (SULPHUR)	-
Clause - 4 (PHOSPHURS)	-
Clause - 4 (MANGANESE)	-
Clause - 4 (SILICON)	-
Clause - 4 (ALUMINIUM)	-
Clause - 4 (NITROGEN)	-

-
Excluding cl 5 minimum breaking force for nominal dia 1 to 18 mm and above 22 mm

12910

BIS, Central Laboratory (CL)

None

IS 1321 : Part 1 (2003)

Sisal ropes – Specification Part 1 Untarred varieties (fourth revision)

4800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.6 (Rot-Proofing Treatment)	-
5.5 (Lubrication Weighing or loading materials shall not be used. For the purpose of dressing the fibre or for the preservation of the rope, a lubricant shall be added preferably petroleum products. The quantity of dressing applied to the fibre shall be neither less than 10 percent nor more than 15 percent calculated on the mass of the finished rope when determined by extraction with petroleum ether or other solvent.)	-

-
-

12911

BIS, Eastern Regional Laboratory (ERL)

None

IS 2039 : Part 1 to 3 (1991)

Steel tubes for bicycle and cycle rickshaws - Specification (Second Revision)

Rs.4320.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1 (Workmanship)	-
Cl. 6.2 (Fin Height)	-
Cl. 6.3 (Straightness)	-
Cl. 8.1 (Tensile Strength)	-
Cl. 8.1 (Yield Strength)	-
Cl. 8.1 (Elongation)	-
Cl. 9 (Diameter)	-
Cl. 9 (Thickness)	-
Cl. 3.2.1, Table 4 (Yield Stress)	-
Cl. 3.2.1, Table 4 (UTS)	-
Cl. 3.2.1, Table 4 (Elongation)	-
Cl. 4.2.1 (Diameter)	-
Cl. 9 (Thickness)	-
Cl. 4.2.3 (Length)	-
Cl. 4.2.1, Table 7 (Yield Stress)	-
Cl. 4.2.1, Table 7 (UTS)	-
Cl. 5.2.1, Table 10 (Diameter)	-
Cl. 5.2.2 (Mean Thickness)	-
Cl. 5.2.3, Table 6 (Length)	-
Cl. 5.1 Table 1 (Carbon)	-
Cl. 5.1 Table 1 (Silicon)	-
Cl. 5.1 Table 1 (Manganese)	-
Cl. 5.1 Table 1 (Phosphorous)	-
Cl. 5.1 Table 1 (Sulphur)	-

-
-

12912

BIS, Central Laboratory (CL)

None

IS 6760 (1972)

Specification for slotted countersunk head wood screws

Rs.900.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1, Table 1 (Screw No. (Screw Design))	-
3.1, Table 1 (Diameter of Unthreaded Shank d, Nominal)	-
3.1, Table 1 (Diameter of Unthreaded Shank d, maximum)	-
3.1, Table 1 (Diameter of Unthreaded Shank d, Minimum)	-
3.1, Table 1 (Pitch)	-
3.1, Table 1 (Diameter of Head, D, Maximum)	-
3.1, Table 1 (Diameter of Head, D, Minimum)	-
3.1, Table 1 (Depth of Head c†, maximum)	-
3.1, Table 1 (Depth of Head c†, minimum)	-
3.1, Table 1 (Width of Slot s, maximum)	-
3.1, Table 1 (Width of Slot s, minimum)	-
3.1, Table 1 (Depth Slot n‡, Maximum)	-
3.1, Table 1 (Depth Slot n‡, Mainimum)	-
4.0 (Designation)	-
5.0 (General Requirements)	-

-
-

12913

BIS, Central Laboratory (CL)

None

IS 12913 (1990)

Bromadiolone CB - Specification

Rs. 3550/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 (Sieving Requirement)	-
3.4 (Bromadiolone Content)	-

-
Excluding Cl. 3.4 Content

12914

BIS, Central Laboratory (CL)

None

IS 2061 (1995)

Bicycle - Front forks - Specification (First Revision)

Rs. 2727/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Dimensions)	-
7.1.3 (iii) Tests for Finish)	-
7.1.2 (ii) Expansion Tes )	-
8 (MARKING)	-

-
-

12915

BIS, Central Laboratory (CL)

None

IS 1912 (1984)

Specification for country jute twine (second revision)

Rs. 4560/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 / 2.1 (MANUFACTURE / Jute Fibre —)	-
2.2 (Yarn)	-
2.3 (Twine)	-
2.4 (Skein)	-

-
-

12916

BIS, Eastern Regional Laboratory (ERL)

None

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

Rs.6600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP') (Bend Test (Radius of Bend))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP') (Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP') (Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP') (Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP') (Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP') (Tensile Strength)	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP') (0.2 Percent Proof Stress)	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W') (Bend Test (Radius of Bend))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W') (Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W') (Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W') (Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W') (Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W') (Tensile Strength)	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W') (0.2 Percent Proof Stress)	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O') (Bend Test (Radius of Bend))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O') (Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O') (Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O') (Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O') (Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O') (Tensile Strength)	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4') (Bend Test (Radius of Bend))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4') (Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4') (Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4') (Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4') (Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4') (Tensile Strength)	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3') (Bend Test (Radius of Bend))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3') (Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3') (Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3') (Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3') (Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3') (Tensile Strength)	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3') (0.2 Percent Proof Stress)	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2') (Bend Test (Radius of Bend))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2') (Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2') (Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2') (Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2') (Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2') (Tensile Strength)	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2') (0.2 Percent Proof Stress)	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1') (Bend Test (Radius of Bend))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1') (Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1') (Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1') (Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1') (Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1') (Tensile Strength)	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1') (0.2 Percent Proof Stress)	-
4.2, Table 1of IS:21 (Designation 64430) (Titanium and or other grain refining elements)	-
Cl.4.2 Table 1 (Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.4.2 Table 1 (Iron - IS 504 and its parts or any other intrumental/chemical methods)	-
Cl.4.2 Table 1 (Copper - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.2 Table 1 (Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.2 Table 1 (Magnesium - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.2 Table 1 (Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.2 Table 1 (Zinc - IS 228 and its parts or any other intrumental/chemical methods)	-
Cl.4.2 Table 1 (Titanium - IS 228 and its parts or any other intrumental/chemical methods)	-

-
Except Aluminium

12917

BIS, Eastern Regional Laboratory (ERL)

None

IS 4368 (1967)

Specification for alloy steel billets, blooms and slabs for forging for general engineering purposes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Diameter, Ovality & Weight)	-
Cl 11 (Hardness & Tensile Test)	-
Cl 11.6 (Additional Tests)	-

-
Except V, Al, Sn

12918

BIS, Central Laboratory (CL)

None

IS 623 (2008)

Bicycle - Bicycle frames - Specification (Third Revision)

Rs. 3477/- excluding Threads. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (DIMENSIONS)	-
4.1 (FRAME TUBES )	-
5 (MANUFACTURE)	-
6 (FINISH)	-
7.1 (a) TRUENESS OF FRAME)	-
7.3 (d) TEST FOR FINISH)	-

-
Excluding 4.2 Screw Threads, 7.1 Trueness of Frame, 7.2 Impact Test on Frame-Fork Assembly

12919

BIS, Central Laboratory (CL)

None

IS 6803 (1972)

Specification for special proofed canvas and duck

11297 View breakup
Rs. 11297/- + testing charges as per referred ISS (excluding Pressure head test).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.2.3 (pH Value)	-
Cl. 3.2.1 , Appendix A-1 (Proofing Content)	-

-
-

12920

BIS, Central Laboratory (CL)

None

IS 9271 (2004)

Unplasticized polyvinyl chloride (UPVC) single wall corrugated pipes for drainage - Specification (First Revision)

1800/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.2 (Density-When tested in accordance with ]S 13360 (Part 3/Sec 1), the densi of the pipe shall be between 1.40 and 1.46 gm/cm3 .)	-
8.1.1 (Visual Appearance, Workmanship and Finish)	-
8.1.2 (Visual Appearance, Workmanship and Finish)	-
7.2, 8 (Wall Thickness)	-
7, Table 1 (DIMENSIONS AND TOLERANCE-The nominal outside diameter and tolerances of the corrugated pipes shall be as per Table 1)	-
7.4.3 (Perforation Requirement-The heght of corrugation -The depth of corrugations shall be 3 percent, Min of nominal outside diameter (dn).)	-

-
Excluding Test Fcility not available for Cl 8.3 Pipe stiffness, Cl 8.4 Impact strength at o Degree C, Cl 8.5 Elongation Test, Cl 8.6 Bending Test, Cl 8.7 Joints (optional)

12921

BIS, Central Laboratory (CL)

None

IS 14106 (2018)

Direct action hand pumps - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Visual tests: All the pumps shall be examined for workmanship, finish and visual defects.)	-
6.2.2 (i) Aligment of groove in top guide bush with respect to the nuts welded on pump body)	-
6.2.2 (ii) Aligment of handle nut with pipe for concentricity)	-
6.2.2 (iii) Location of holes in the pump head flange with respect to the direction of the spout)	-
6.2.2 (iv) Reasonable flatness of the flanges to provide proper matching of the holes to ensure unrestricted insertion of the bolts )	-
6.2.2 (v) Matching of faces indicated in respective figures of piston plate, follower plate and foot valve body)	-
6.2.2 (vi) Concentricity of the two internal diameter of the reducing socket)	-
6.3.1 (Routine test)	-
6.4 (Test for Joints)	-
6.4 (Pump Rod)	-
6.4 (Riser Pipe)	-
6.4 (Upper casing and lower casing)	-
6.4 (Load test )	-
4.4 & Table 2 (Bell Dimensions, mm)	-
4.4 & Table 2 (Bell Dimensions for Upper casing pipe)	-
4.4 & Table 2 (a)Socket Depth)	-
4.4 & Table 2 (b) Mean socket internal dia at mouth)	-
4.4 & Table 2 (c) Mean socket internal diameter at root )	-
4.4 & Table 2 (Bell Dimensions for Lower casing pipe)	-
4.4 & Table 2 (a)Socket Depth)	-
4.4 & Table 2 (b) Mean socket internal dia at mouth)	-
4.4 & Table 2 (c) Mean socket internal diameter at root )	-
4.4 & Table 2 (Bell Dimensions for Sand Trap)	-
4.4 & Table 2 (a)Socket Depth)	-
4.4 & Table 2 (b) Mean socket internal dia at mouth)	-
4.4 & Table 2 (c) Mean socket internal diameter at root )	-
6.2.3 (Dimensional tests, Pump head, mm)	-
6.2.3 (Pump head flange)	-
6.2.3 (Pump stand)	-
6.2.3 (Intermediate flange)	-
6.2.3 (Grommet)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Top Guide Bush)	-
6.2.3 (Handle)	-
6.2.3 (Handle Cushion Top)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Bottom Cushion)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Handle Retainer)	-
6.2.3 (Top Connector)	-
6.2.3 (Male Adapter)	-
6.2.3 (Female Adapter)	-
6.2.3 (Piston Plate)	-
6.2.3 (Follower Plate)	-
6.2.3 (Piston Fap Valve)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Cup Seal)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Bottom Connector)	-
6.2.3 (Grapple Parts)	-
6.2.3 (Foot Valve Body)	-
6.2.3 (O Ring)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Flap Valve)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Foot valve Guide)	-
6.2.3 (Threaded Coupler(M))	-
6.2.3 (Threaded Coupler(F))	-
6.2.3 (Riser Pipe Centralizer)	-
6.2.3 ( Shore Hardness on Scale A)	-
6.2.3 (O Ring)	-
6.2.3 (Foot Valve Retainer)	-
6.2.3 (Rubber Seat)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Reducing Sdocket (Alternate Design))	-
6.2.3 (Well Screen (alternate))	-
6.2.3 (Screen Coupler)	-
6.2.3 (Sand Trap)	-
6.2.3 (Cutter)	-
6.2.3 (Retrieving Rod)	-
6.2.3 (Combination Spanner)	-
5.2(a) (Mass of Zinc coating,g/m2)	-
5.2(a) (Adhesion of coating)	-
5.2(a) (Galvanizing of Head)	-
5.2(b) (Galvanizing of Handle)	-
5.2(b) (Mass of Zinc coating,g/m2)	-
5.2(b) (Adhesion of coating)	-
5.2© (Galvanizing of Stand)	-
5.2© (Mass of Zinc coating,g/m2)	-
5.2© (Adhesion of coating)	-
5.2(d) (Galvanizing of Intermediate Flange)	-
5.2(d) (Mass of Zinc coating,g/m2)	-
5.2(d) (Adhesion of coating)	-
4.2 (Mean Outside Diameter)	-
4.2 (Wall Thickness)	-
4.2 (Length)	-
4.2 (Visual Appearance)	-
4.2 (Test for Internal Diameter)	-
4.2 (Specific Gravity)	-

-
-

12922

BIS, Central Laboratory (CL)

None

IS 702 (1988)

Specification for indusrial bitumen (Second Revision)

- View breakup
Hence complete testing charges for the product are Rs.6300..00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 and 6.1 Table 1 (Specific Gravity, 85/25)	-
5.1 and 6.1 Table 1 (Specific Gravity, 85/40)	-
5.1 and 6.1 Table 1 (Specific Gravity, 90/15)	-
5.1 and 6.1 Table 1 (Specific Gravity, 115/15)	-
5.1 and 6.1 Table 1 (Specific Gravity 135/10)	-
5.1 and 6.1 Table 1 (Specific Gravity 155/6)	-

-
-

12923

BIS, Central Laboratory (CL)

None

IS 7283 (1992)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

Rs 1500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Workmanship)	-
Cl 7 (Diameter & Out Of Round)	-
Cl 5 (Material Test)	-

-
Since the composition of steel is mutually agreed basis , as such element to be tested with specified requirement and tolerances if any may please be declared with method of testing. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm. Excluding i] cl 8 decarburization, ii] cl 11 grain size

12924

BIS, Central Laboratory (CL)

None

IS 16088 (2012)

Chlorinated polyvinyl chloride (CPVC) pipes for automatic sprinkler fire extinguishing system - Specification

5400 View breakup
Rs. 5400/- (excluding Compound chlorine content, Fire exposure test, Flammability test, Resistance to external blows at 0oC, Kinking resistance test and CPVS fire sprinkler pipes and fittings) + testing charges as per referred ISS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.5 IS 12235(Part 2) (Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-
9.3 (Reversion test : )	-
9.5 (Density)	-
8 (Pipe Ends)	-
7.1.1 IS 12235 (Part 1) Table 1 (Mean outside Diameter)	-
7.1.1.1 IS 12235 (Part 1) Table 1 (Outside Diameter at any point)	-
7.1.2 (Wall Thickness)	-
10.3 (Flattening)	-
10.4 (Tensile Strength)	-
9.1 (Visual Appearance)	-
5 (Classification of pipes)	-

-
Excluding Testing Facility not avaialble for Cl.9.6 Fire exposure test, cl. 9.7 Flammability Test, cl.10.1 hydrostatic Characterstics, Cl 10.2 resistance to external Blow At 0 °C, Cl. 10.3 flattening Test, Cl.10.5 Kinking Resistance Test, Cl. 10.7 Vibration Test (Type Test)

12925

BIS, Central Laboratory (CL)

None

IS 6046 (1982)

Specification for gypsum for agricultural use (First Revision)

3881.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2 (Sodium Content)	-
2.2 (Calcium Sulphate Content)	-
2.1 (Fineness)	-
2.2 (Sodium Content)	-
2.2 (Calcium Sulphate Content)	-

-
-

12926

BIS, Central Laboratory (CL)

None

IS 14268 (2022)

Uncoated stress relieved low relaxation seven-wire (ply) strand for prestressed concrete -Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.2 (Carbon)	-
4.1.2 (Silicon)	-
4.1.2 (Manganese)	-
4.1.2 (Sulphur)	-
4.1.2 (Phosphorus)	-
4.1.2 (Chromium)	-
4.1.2 (Nickel)	-
4.1.2 (Molybdenum)	-
4.1.2 (Copper)	-
4.1.2 (Aluminum)	-
4.1.2 (Sulphur + Phosphorus)	-
4.1.2 (Boron)	-
4.1.2 (Titanium)	-
4.1.2 (Niobium)	-
4.1.2 (Vanadium)	-
4.1.2 (Titanium+Niobium+Vanadium)	-
4.1.2 (Nitrogen)	-
4.5 (Workmanship and Finish)	-
6(Table 2) (Diameter)	-
6(Table 2) (Tensile Strength)	-
6(Table 2) (Cross Sectional Area)	-
6(Table 2) (Mass Per Meter)	-
4.5 (Workmanship and Finish)	-

-
Excluding i] cl 6.2.2 breaking strength & 0.2 % Proof stress, ii] cl 6.2.3 elongation, iii] cl 6.2.4 relaxation properties

12927

BIS, Central Laboratory (CL)

None

IS 916 (2000)

Square tins for solid products - Specification (Fourth Revision)

4950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Capacity)	-
4.2 (Dimension and Tolerances)	-
4.3.1 (Nominal Thickness)	-
4.3.2 (Handle wire diameter)	-
4.3.2 (Handle wire material)	-
4.4.1 (Body)	-
4.4.2 (Sides)	-
4.4.3 (Top and Bottom)	-
4.4.4 (Top and Bottom embossing)	-
4.4.5 (Handle)	-
4.4.6 (Closure)	-
4.4.7 (Supply condition)	-
4.4.8 (Internal Finish)	-
4.4.9 (External Treatment)	-
5.1 (Air-Pressure Test)	-
5.2 (Handle Pull Test)	-

-
Excluding 5.1 Air-Pressure Test, 5.2 Handle Pull Test,

12928

BIS, Central Laboratory (CL)

None

IS 9282 (2002)

Wire ropes and strands for suspension bridges - Specification (First Revision)

Rs. 3000/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.1 ( MATERIAL- Requirements of Wire -Dimensional Limits and Tolerances )	-
4.2.2 (Tensile Test)	-
4.3 (Elongation Test )	-
4.5.1 (Galvanizing)	-
4.5.2 (Wrap Tes)	-
5 (GENERAL REQUIREMENTS General requirements shall be according to IS 6594.)	-
6.1 (JOINTS)	-
7.1 ( DIRECTION OF LAY)	-
8.1 (LENGTH OF LAY)	-
10. table 1 to 11 (MINIMUM BREAKING FORCE )	-
Clasuse - 4 ( CARBON)	-
Clasuse - 4 (SULPHUR)	-
Clasuse - 4 (PHOSPHURS)	-
Clasuse - 4 (MANGANESE)	-
Clasuse - 4 (SILICON)	-
Clasuse - 4 ( ALUMINIUM)	-
Clasuse - 4 (NITROGEN)	-
Clasuse - 4 (Nickel)	-
Clasuse - 4 (Chromium)	-
Clasuse - 4 (Molybdenum)	-
Clasuse - 4 (NIOBIUM)	-
Clasuse - 4 (VANADIUM)	-
Clasuse - 4 (TITANIUM)	-

-
EXCLUDING -; i] cl 10 minimum breaking force, ii] cl 11 elongation or stretch

12929

BIS, Central Laboratory (CL)

None

IS 4109 (1967)

Specification for kadahies

Rs. 750/- and testing charges as per referred Iss View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (Materials)	-
3 (a) Round Shape / Bowl Shape)	-
3 (b) Nominal dia. at top D1 mm)	-
3 (c) Nominal overall Height H1 mm)	-
3 (d) Thickness at bottom mm Min)	-
4 (Manufacture and Workmanship)	-
6 (Test)	-

-
-

12930

BIS, Central Laboratory (CL)

None

IS 285 (1992)

Laundry soaps - Specification (Third Revision)

5300 View breakup
For Type 1 -Rs.6000/-, For Type 2 Gr.1- Rs.4800/-, For Type 2 Gr.2-Rs.5100/- Average testing charges (all types and grades)-Rs.5300.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.4, Table-1 (ix) Type-2 (Built soap) Gr-2 (LSD/NSD content, IS 4955)	-
5.4, Table-1 (viii) Type-2 (Built soap) Gr-1 & Gr-2 (Chloride (as sodium chloride), IS 286)	-
5.4, Table-1 (viii) Type-1 (Pure soap) (Chloride (as sodium chloride), IS 286)	-
5.4, Table-1 (vii) Type-1 (Pure soap) (Glycerol, IS 286)	-
5.4, Table-1 (v) Type-2 (Built soap) Gr-1 (Matter insoluble in alcohol, IS 286)	-
5.4, Table-1 (v) Type-1 (Pure soap) (Matter insoluble in alcohol, IS 286)	-
5.4, Table-1 (iv) (Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-
5.4, Table-1 (iii) (Unsaponified fatty matter, IS 286)	-
5.4, Table-1 (ii) (Rosin acids, percent by mass of total fatty matter, IS 286 )	-
5.4, Table-1 (i) Type-2 (Built soap) Gr-2 (Total fatty matter, IS 286)	-
5.4, Table-1 (i) Type-2 (Built soap) Gr-1 (Total fatty matter, IS 286)	-
5.4, Table-1 (i) Type-1 (Pure soap) (Total fatty matter, IS 286)	-
5.3 (Odour and Lathering Properties, IS 286)	-
5.4, Table-1 (ix) Type-2 (Built soap) Gr-2 (LSD/NSD content, IS 4955)	-
5.4, Table-1 (viii) Type-2 (Built soap) Gr-1 & Gr-2 (Chloride (as sodium chloride), IS 286)	-
5.4, Table-1 (viii) Type-1 (Pure soap) (Chloride (as sodium chloride), IS 286)	-
5.4, Table-1 (v) Type-2 (Built soap) Gr-1 (Matter insoluble in alcohol, IS 286)	-
5.4, Table-1 (v) Type-1 (Pure soap) (Matter insoluble in alcohol, IS 286)	-
5.4, Table-1 (iv) (Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-
5.4, Table-1 (iii) (Unsaponified fatty matter, IS 286)	-
5.4, Table-1 (ii) (Rosin acids, percent by mass of total fatty matter, IS 286 )	-
5.4, Table-1 (i) Type-2 (Built soap) Gr-2 (Total fatty matter, IS 286)	-
5.4, Table-1 (i) Type-2 (Built soap) Gr-1 (Total fatty matter, IS 286)	-
5.4, Table-1 (i) Type-1 (Pure soap) (Total fatty matter, IS 286)	-
5.3 (Odour and Lathering Properties, IS 286)	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number