| 12931 |
BIS, Central Laboratory (CL)
| None
| IS 9165 : Part 2 (1992) |
Surgical instruments - Needles, suture: Part 2 eyed needles - Sizes, shapes and dimensions |
- |
Rs.10030/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1, Table 1 (Dimensions of Eyed Suture Needles) |
- |
|
|
|
| 3.1, Table 1 (Dimensions of Eyed Suture Needles) |
- |
|
|
|
|
- |
-
- |
| 12932 |
BIS, Central Laboratory (CL)
| None
| IS 12650 (2018) |
Textiles – Jute bags for packing 50 kg foodgrains – Specification (third revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4-4.2 (Manufacture-The number of stitches per decimeter shall be 10 ±1.) |
- |
|
|
|
| 4-4.3 (Manufacture-Safety Stitch-The number of safety union stitches per decimetre shall be10 ± 1.) |
- |
|
|
|
| 4-4.1 (MANUFACTURE- The bags shall be made from single piece of twill weave jute sacking of uniform construction having
nominal mass of 579 g/m2 as given below with warp running along the length of the bag:) |
- |
|
|
|
| 4-4.2 (Manufacture-The number of stitches per decimeter shall be 10 ±1.) |
- |
|
|
|
| 4-4.3 (Manufacture-Safety Stitch-The number of safety union stitches per decimetre shall be10 ± 1.) |
- |
|
|
|
| 4-4.1 (MANUFACTURE- The bags shall be made from single piece of twill weave jute sacking of uniform construction having
nominal mass of 579 g/m2 as given below with warp running along the length of the bag:) |
- |
|
|
|
| 4-4.1-a) (MANUFACTURE) |
- |
|
|
|
| 4-4.1-b) (MANUFACTURE) |
- |
|
|
|
| 4-4.1 (MANUFACTURE) |
- |
|
|
|
| 4-4.2 (Manufacture) |
- |
|
|
|
| 4-4.3 (Manufacture-Safety Stitch
) |
- |
|
|
|
| 4-4.4 (Manufacture-Hemming at the Mouth ) |
- |
|
|
|
| 4-4.5 (Manufacture- Freedom from Defects
) |
- |
|
|
|
| 5-5.1-Table 1-Sr. no. i) (SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 a) Out side Length , cm 94 (For both type A & Type B) Tolerance + 4 / -0 cm) |
- |
|
|
|
| 5-5.1-Table 1-Sr. no. i) (SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 b) Outside width, cm 57 (For both type A & Type B) Tolerance + 4 / -0 cm) |
- |
|
|
|
| 5-5.1-Table 1-Sr. no.i i) (SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Ends/dm Type A 46 + 2 /Type B 76 + 4 / -3) |
- |
|
|
|
| 5-5.1-Table 1-Sr. no.iii) (SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Picks/dm Type A 50 (2 x 25) / Type B 28 + 2) |
- |
|
|
|
| 5-5.1-Table 1-Sr. no.iv) (SPECIFIC REQUIREMENTS-Cl. 8.5.2 of IS 9113 Corrected Mass/bag, g ( See Note 2) For both Type A & Type B 665 + 8.0 / -6.0 percent) |
- |
|
|
|
| 5-5.1-Table 1-Sr. No.v) (SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): a ) Warpway- 1570 (160) for both type A & Type B) |
- |
|
|
|
| 5-5.1-Table 1-Sr. No.v) (SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): b ) Weftway- 1420 (145) for both type A & Type B) |
- |
|
|
|
| 5-5.1-Table 1-Sr. No.vi) (SPECIFIC REQUIREMENTS-Cl. 8.7 of IS 9113 Average side seam strength
(5 cm ×20 cm raveled strip), Min, N (kgf): 490 (50) for both type A & Type B) |
- |
|
|
|
|
- |
-
- |
| 12933 |
BIS, Central Laboratory (CL)
| None
| IS 9471 : Part 7 (2000) |
Modular lower limb orthotic components - Specification: Part 7 orthotic joint bars, ankle and knee (Upper And Lower) |
- |
Rs 1510/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (SHAPE AND DIMENSIONS) |
- |
|
|
|
| 4.2 (SHAPE AND DIMENSIONS) |
- |
|
|
|
| 6.1 (Workmanship and Finish) |
- |
|
|
|
| 6.2 (Workmanship and Finish) |
- |
|
|
|
| 7.0 (Bend Test) |
- |
|
|
|
|
- |
-
- |
| 12934 |
BIS, Central Laboratory (CL)
| None
| IS 12594 (1988) |
Hot - Dip zinc coating on structural steel bars for concrete reinforcement - Specification |
- |
2200 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 , Table 1 (Mass of Zinc coating , IS 6745) |
- |
|
|
|
| 5.2 (Freedom from defects , IS 2629) |
- |
|
|
|
| 5.3 (Adhesion of Galvanized coating) |
- |
|
|
|
| Clause - 4, 4.1 (CARBON) |
- |
|
|
|
| Clause - 4, 4.1 (SULPHUR) |
- |
|
|
|
| Clause - 4, 4.1 (PHOSPHURS) |
- |
|
|
|
| Clause - 4, 4.1 (MANGANESE) |
- |
|
|
|
| Clause - 4, 4.1 (SILICON) |
- |
|
|
|
| Clause - 4, 4.1 (ALUMINIUM) |
- |
|
|
|
| Clause - 4, 4.1 (NITROGEN) |
- |
|
|
|
|
- |
-
EXCLUDING -; i] cl 5.4 chromating |
| 12935 |
BIS, Central Laboratory (CL)
| None
| IS 8074 (1990) |
Monocrotophossl - Specification (Second Revision) |
- |
Rs.2750.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2 (Physical) |
- |
|
|
|
| 3.2.1 (Description) |
- |
|
|
|
| 3.2.2 (Cold Test) |
- |
|
|
|
| 3.2.3 (Flash Point ( Abel )) |
- |
|
|
|
| 3.3 (Chemical) |
- |
|
|
|
| 3.3.1 (Monocrotophos Content) |
- |
|
|
|
| 3.3.1.1 (actual value of the monocrotophos
content) |
- |
|
|
|
| 3.3.1.2 (average monocrotophos content) |
- |
|
|
|
| 3.3.2 (Free Aceto-Acetic Acid Monomethyl-amide
( MMA ) Content) |
- |
|
|
|
| 3.3.3 (Acidit) |
- |
|
|
|
|
- |
-
- |
| 12936 |
BIS, Central Laboratory (CL)
| None
| IS 9585 (1980) |
Specification for lactometers |
- |
Rs 2400.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.1 (Size) |
- |
|
|
|
| 6.1, Table 1 (Length in mm of the bulb) |
- |
|
|
|
|
- |
-
- |
| 12937 |
BIS, Central Laboratory (CL)
| None
| IS 2414 (2005) |
Cycle and rickshaw pneumatic tyres - Specification (Fourth Revision) |
- |
Rs.8630/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Type) |
- |
|
|
|
| 4.2 (Designation) |
- |
|
|
|
| 5.1 & 5.2 (Dimensions) |
- |
|
|
|
| 6.1 (Construction) |
- |
|
|
|
| 6.2 (Tyre Cord) |
- |
|
|
|
| 6.3 (Tyre Casing Strength) |
- |
|
|
|
| 6.4 (Bead Wire Joint) |
- |
|
|
|
| 6.5 (Requirements of Ruber Compound) |
- |
|
|
|
| 6.6 (Adhesion test) |
- |
|
|
|
|
- |
-
EXCLUDING -; Performance test |
| 12938 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 844 : Part 1 (1979) |
Specification for screwdrivers: Part 1 techincal supply conditions (Second Revisionn) |
- |
375 + ferrule material testing per IS:513 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Hardness) |
- |
|
|
|
| 5.1,Table 1 ( Dimension, axb) |
- |
|
|
|
| 5.1,Table 1 (t) |
- |
|
|
|
| 5.1,Table 1 (r) |
- |
|
|
|
| 5.2,Table 2 (l) |
- |
|
|
|
| 6.1 (Free from Defects) |
- |
|
|
|
| 6.2 (Finish of Handle) |
- |
|
|
|
| 6.3 (Alignment ) |
- |
|
|
|
| 7 (Finish) |
- |
|
|
|
| 8.2 (Stricking Test) |
- |
|
|
|
|
- |
-
Except Torque |
| 12939 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 3976 (2018) |
Safety Rubber Canvas Boots for Miners †Specification ( Sixth Revision ) |
For all types |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.5.2.5 Compact Sole Heel
Cl.5.2.5.1 IS 3400 (Part 2) (requirements prescribed in col 3 of Table 2 when tested
as per corresponding test methods prescribed in col 4
of Table 2.
i)i) Hardness (IRHD) |
- |
|
|
|
| Cl.5.2.3 Coated Binding Material
IS 1954 (
Coated binding materials shall conform to the
requirements given in col 3 of Table 1 when tested
according to the methods prescribed in col 4 of Table 1.
i)Width in mm,
) |
- |
|
|
|
| Cl.5.2.3 Coated Binding Material
Annex C (ii) Breaking load in N, Min (50 cm grip length test specimen) ) |
- |
|
|
|
| CL.5.2.10 Counter Stiffener (
A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having
thickness not less than 1.5 mm is to be stitched at inside
of upper so as to fortify the back of the footwear at
joints of quarter.) |
- |
|
|
|
| Cl.5.2.1 Upper
Cl.5.2.1.1
IS 3400(Part 5) ( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load
of 1.5 kg.)) |
- |
|
|
|
| Cl.5.2.5 Compact Sole Heel
Cl. 5.2.5.1
(The compact sole heel shall be made out
of polymeric/rubber components and the typical design
recommendation (not mandatory) of compact sole heel
is as shown in Fig. 3. Sectional view of Type 1/Type 2
)
toe position is given in Fig. 4.) |
- |
|
|
|
| Cl.5.2.3 Coated Binding Material
IS 1954 (
Coated binding materials shall conform to the
requirements given in col 3 of Table 1 when tested
according to the methods prescribed in col 4 of Table 1.
i)Width in mm,
) |
- |
|
|
|
| Cl.5.2.1.3 ,
Cl.6.5 of IS 15298 (Part 1). ( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance
with 6.5 of IS 15298 (Part 1).) |
- |
|
|
|
| Cl.5.2.5 Compact Sole Heel
Cl. 5.2.5.1
(The compact sole heel shall be made out
of polymeric/rubber components and the typical design
recommendation (not mandatory) of compact sole heel
is as shown in Fig. 3. Sectional view of Type 1/Type 2
)
toe position is given in Fig. 4.) |
- |
|
|
|
| Cl.5.2.5 Compact Sole Heel
5.2.5.1 IS 3400 (Part 4) (ii)*Change in hardness after
accelerated ageing at 100 ± 2
°C for 24 h
) |
- |
|
|
|
| Cl.5.2.5.3 Ageing for whole footwear (When rubber is used for manufacturing boots or when
the outer sole heel is made of bi-polymer, the finished
boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not
develop any sign of tackiness or brittleness.) |
- |
|
|
|
| Cl.5.2.9 Eyelets (
Aluminum eyelets of external collar diameter not less
than 10 mm and wall thickness of 0.30 to 0.35 mm
shall be used.) |
- |
|
|
|
| Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/
counter stiffener (
When textiles used as lining for all the above are tested
in accordance with 6.12 of IS 15298 (Part 1), the lining
shall not develop any holes before the following number
of cycles has been performed:) |
- |
|
|
|
| Cl.5.5 Mass (The mass of one pair of finished footwear of size 8
shall not exceed 1 500 g for Type 1 and 1 400 g for
Type 2 with an increase or decrease of 100 g for each
bigger or smaller size, respectively.) |
- |
|
|
|
| Cl.5.10 Consolidation Test (
Representative sample of width 25 ± 0.5 mm are cut
out from the quarter of the upper along the length of
boot. The plies are separated by breaking the bond.
Carry out the test on two specimens in accordance with
IS 3400 (Part 5). Th) |
- |
|
|
|
| Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/
counter stiffener (
When textiles used as lining for all the above are tested
in accordance with 6.12 of IS 15298 (Part 1), the lining
shall not develop any holes before the following number
of cycles has been performed:) |
- |
|
|
|
| Cl.5.6 ( Height of Upper
Height of upper of the boots shall conform to column 5
(Design C) and column 4 (Design B) of 5.2.2, Table 4
of IS 15298 (Part 2) for Type 1 and Type 2, respectively
when measured as per 6.2 of IS 15298 (Part 1) on the
inside of the back of the footwear and from seat of the
insole to top edge of the upper.) |
- |
|
|
|
| Cl.5.2.1 Upper
Cl.5.2.1.1
IS 3400(Part 5) ( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load
of 1.5 kg.)) |
- |
|
|
|
| Cl.6.2 Flexing Resistance of Compact Outsole (
When outsole is tested in accordance with 8.4 of
IS 15298 (Part 1), the cut growth shall not be greater
than 4 mm before 30 000 cycles.) |
- |
|
|
|
| 7.2 (Resistance to electricity) |
- |
|
|
|
| Cl. 8 (IS 17011, Table-1 (i)) (Allergenic and carcinogenic disperse dyes) |
- |
|
|
|
|
- |
-
Chem- Complete Material declaration required for Innocuousness test.
Mech- Complete,
Mech Quantity:- 5 Pair + Raw material + Type to be delared + Binding material, Thread, Toecap and eyelet to be provided seperately+ Slab of outsole for tear strength |
| 12940 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 513 : Part 2 (2016) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
For all grades except the tests mentioned in remarks |
- View breakup
for Chemical Rs. 3750/-
Testing charges for each of the elements other than Table (Aluminum, Silicon, Nitrogen, Chromium,
Nickel, Niobium, Vanadium, Titanium, Molybdenum, Boron, Calcium & other) will be Rs.1004/-
For Mechanical Rs. 6900/-
Tensile Strain Hardening component, Bake
hardening and Surface finished test and Rs.1004/- for each of the elements other than carbon, sulphur,
phosphorus and manganese.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0 (CARBON) |
- |
|
|
|
| 6.0 (SULPHUR) |
- |
|
|
|
| 6.0 (PHOSPHORUS) |
- |
|
|
|
| 6.0 (MANGANESE) |
- |
|
|
|
| 6.0 (SILICON) |
- |
|
|
|
| 6.0 (NITROGEN) |
- |
|
|
|
| Cl 7 (UTM) |
- |
|
|
|
| Cl 9 (Workmanship) |
- |
|
|
|
| Cl 10 (Length, Width & Thickness) |
- |
|
|
|
| 6.0 (ALUMINIUM) |
- |
|
|
|
| 8.2 (Erichson cupping test - IS 10175 for CR2, CR3, CR4 Grades from 0.5 - 2.0 mm Thickness) |
- |
|
|
|
| 8.3 (Rockwell Hardness test -HRB - IS:1586) |
- |
|
|
|
| 8.0 (Surface Roughness) |
- |
|
|
|
| Cl. 10 (Thickness (08)) |
- |
|
|
|
| Cl. 10 (Width (04)) |
- |
|
|
|
| 7.0 & table 3 (Boron as B) |
- |
|
|
|
| 7.0 & table 3 (Chromium as Cr) |
- |
|
|
|
| 7.0 & table 3 (Nickel as Ni) |
- |
|
|
|
| 7.0 & table 3 (Molybdenum as Mp) |
- |
|
|
|
| 7.0 & table 3 (Niobium as Nb) |
- |
|
|
|
| 7.0 & table 3 (Vanadium as V) |
- |
|
|
|
| 7.0 & table 3 (Titanium as Ti) |
- |
|
|
|
| 7.0 & table 3 (Calcium as Ca) |
- |
|
|
|
|
- |
-
Mech: Except Tensile Strain Hardening Component – n-Value |
| 12941 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
Excluding Scope restricted "for ISC- 510LA, 550LA, 600LA, 700LA, 860LA, ISC-W, ISC-Y, ISC-YH, ISC-YC, ISC-C, ISC-M and ISC- HF" |
Rs.8850/- Excluding Tensile Strain Hardening component View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.0 (CARBON) |
- |
|
|
|
| 7.0 (SULPHUR) |
- |
|
|
|
| 7.0 (PHOSPHORUS) |
- |
|
|
|
| 7.0 (MANGANESE) |
- |
|
|
|
| 7.0 (SILICON) |
- |
|
|
|
| 7.0 (NITROGEN) |
- |
|
|
|
| Cl. 8.1 & Table
5A, 5B & 5C (Yield Stress) |
- |
|
|
|
| Cl. 8.1 & Table
5A, 5B & 5C (Elongation at 50 mm gauge length) |
- |
|
|
|
| Cl. 8.1 & Table
5A, 5B & 5C (Elongation at 80 mm gauge length) |
- |
|
|
|
| Cl. 8.2 (Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
|
|
|
| Cl. 8.3 Table 6 (Hardness Test
( Only for CR0 & CR1)) |
- |
|
|
|
| Cl. 8.4 (Bend Test) |
- |
|
|
|
| Cl. 11 (Thickness) |
- |
|
|
|
| Cl. 11 (Width) |
- |
|
|
|
| Cl 10 (Workmanship) |
- |
|
|
|
| Cl 11 (Thickness (08)) |
- |
|
|
|
| CL 11.0 (Width (04)) |
- |
|
|
|
| 7.0 (ALUMINIUM) |
- |
|
|
|
| 7.0 (MICRO ALLOYS) |
- |
|
|
|
| Cl 7.1 table 3 (Chromium) |
- |
|
|
|
| Cl 7.1 table 3 (Nickel) |
- |
|
|
|
| Cl 7.1 table 3 (Calcium) |
- |
|
|
|
| Cl 7.1 table 3 (Niobium) |
- |
|
|
|
| Cl 7.1 table 3 (Vanadium) |
- |
|
|
|
| Cl 7.1 table 3 (Titanium) |
- |
|
|
|
| Cl 7.1 table 3 (Boron) |
- |
|
|
|
| Cl 7.1 table 3 (Molybdenum) |
- |
|
|
|
|
- |
-
Mech- Except Cl 8.5, 8.6,8.7, 9.5 & table 8 (Plastic Strain Ratio,TS Hardening Comp, Bk Hrdn. |
| 12942 |
BIS, Central Laboratory (CL)
| None
| IS 12234 (1988) |
plastic equilibrium float valve for cold water services |
- |
- View breakup
Horizontal inlet shank type :Rs. 6300.00, b) Vertical inlet shank type :Rs. 6300.00
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4/4.2 (MATERIAL) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.8 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.7 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.7 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.6 (CONSTRUCTION) |
- |
|
|
|
| 6/6.7 (CONSTRUCTION) |
- |
|
|
|
| 6/6.1/6.4-Fig. 2A (CONSTRUCTION-Horizontal Inlet Shank type-Dimensions- 5 mm Max) |
- |
|
|
|
| 6/6.1/6.4-Fig. 2A (CONSTRUCTION-Horizontal Inlet Shank type-Dimensions- 6.5 to 8 mm) |
- |
|
|
|
| 6/6.1/6.4-Fig. 2A (CONSTRUCTION-Horizontal Inlet Shank type-Dimensions- 14.70 to 15.00 mm) |
- |
|
|
|
| 6/6.1/6.4-Fig. 2B (CONSTRUCTION-Vertical Inlet Shank type-Dimensions- minimum bore 9 mm ) |
- |
|
|
|
| 6/6.7 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
| 6/6.2 (CONSTRUCTION) |
- |
|
|
|
|
- |
-
- |
| 12943 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 17216 (2019) |
Polyethylene Mulch Films for Agriculture and Horticulture • Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.1 (Density) |
- |
|
|
|
| 5.1.2 (Melt Flow Index) |
- |
|
|
|
| 5.2.1 (Visual Appearance) |
- |
|
|
|
| 5.2.2 (Film Form) |
- |
|
|
|
| 5.2.4 (Odour) |
- |
|
|
|
| 5.3.1.1 (Tolerance on thickness) |
- |
|
|
|
| 5.3.1.2 (Tolerance on width) |
- |
|
|
|
| 5.3.2, Table 1 (Nominal Film Thickness) |
- |
|
|
|
| 5.3.1.2 (Tolerance on width) |
- |
|
|
|
| 5.3.2, Table 1 (Nominal Film Thickness) |
- |
|
|
|
| 5.3.3 (Tensile Strength at Break) |
- |
|
|
|
| 5.3.4 (Elongation at Break) |
- |
|
|
|
| 5.3.5 (Coefficient of Friction) |
- |
|
|
|
|
- |
-
Except Impact strength |
| 12944 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS/ISO 15761 (2002) |
Steel gate, globe and check valves for sizes DN 100 and smaller, for petroleum and natural gas industries |
- |
Rs.4990 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.2.2 (Flow Passage way) |
- |
|
|
|
| 5.3.1 (Wall Thickness) |
- |
|
|
|
| 5.3.2 (Wall Thickness) |
- |
|
|
|
| 5.3.3 (Wall Thickness) |
- |
|
|
|
| 5.4.2.1, Table4 (Socket Welding Ends, Diameter) |
- |
|
|
|
| 5.4.2.1, Table4 (Socket Welding Ends, Depth) |
- |
|
|
|
| 5.4.2.2, Table5 (Socket wall thickness) |
- |
|
|
|
| 5.4.2.3 (End to end dimension) |
- |
|
|
|
| 5.4.4.1 (Flange ends) |
- |
|
|
|
| 5.4.4.2 (Flange ends) |
- |
|
|
|
| 5.4.4.3,TABLE 6 (Flange ends) |
- |
|
|
|
| 5.4.5.1,Fig 1,Table 7 (Butt Welding Ends ,A) |
- |
|
|
|
| 5.4.5.1,Fig 1,Table 7 (Butt Welding Ends ,B) |
- |
|
|
|
| 5.4.5.1,Fig 1,Table 7 (Butt Welding Ends ,T) |
- |
|
|
|
| 5.4.5.2 (End to end dimension) |
- |
|
|
|
| 5.4.6.1 (Body Seat) |
- |
|
|
|
| 5.4.6.2 (Body Seat) |
- |
|
|
|
| 5.4.6.3 (Body Seat inside dia.) |
- |
|
|
|
| 5.7.1 (Stem) |
- |
|
|
|
| 5.7.2 (Stem) |
- |
|
|
|
| 5.8.1 (Stem nut or stem bushing) |
- |
|
|
|
| 5.9.1,Table 10 (Uncompressed packing height , hp) |
- |
|
|
|
| 5.9.2 (Surface Finish) |
- |
|
|
|
| 5.9.3 (Gland) |
- |
|
|
|
| 5.9.4 (Packing) |
- |
|
|
|
| 5.10.1 (Packing Retension) |
- |
|
|
|
| 5.10.2 (Packing Retension) |
- |
|
|
|
| 5.10.3 (Packing Retension) |
- |
|
|
|
| 5.10.4 (Packing Retension) |
- |
|
|
|
| 5.11.1 (Hand Wheel) |
- |
|
|
|
| 5.11.2 (Hand Wheel) |
- |
|
|
|
| 5.11.3 (Hand Wheel) |
- |
|
|
|
|
- |
-
Except 8.1 Pressure tests, 8.1.6 Fugitive emission testing (type test) |
| 12945 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 5950 (1984) |
Specification for shot firing cables (For Use Other Than In Shafts) (First Revision) |
- |
11030 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Conductor : Material -IS : 8130-2013) |
- |
|
|
|
| 4.1 (Insulation : Material -IS : 5831-1984) |
- |
|
|
|
| 5.1 (Sheath : materail IS : 5831-1984) |
- |
|
|
|
| 6.1 (Conductor : Construction IS : 8130-2013) |
- |
|
|
|
| 7.1 (Insulation : Application ) |
- |
|
|
|
| 7.2 (Thickness of Insulation - average ) |
- |
|
|
|
| 7.2 (Thickness of Insulation - Min. ) |
- |
|
|
|
| 7.3 (Colour of Insulation) |
- |
|
|
|
| 8.1, 9.1 (c) (Nominal radial thickness of sheath) |
- |
|
|
|
| 8.2 (Thickness of Sheath) |
- |
|
|
|
| 8.2 (Thickness of Sheath - min.) |
- |
|
|
|
| 8.3 (Colour of Sheath) |
- |
|
|
|
| 9.1 a) (Annealing test) |
- |
|
|
|
| 9.1 b) (Conductor resistance test) |
- |
|
|
|
| 9.1 d) i) (Insulation : Tensile strength) |
- |
|
|
|
| 9.1 d) i) (Insulation : elongation at break) |
- |
|
|
|
| 9.1 d) i) (Sheath : Tensile strength) |
- |
|
|
|
| 9.1 d) i) (Sheath : elongation at break) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength Variation) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : elongation at break) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Insulation : elongation variation at break) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength variation ) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Sheath : elongation at break) |
- |
|
|
|
| 9.1 d) ii) (Ageing in air oven - Sheath : elongation variation at break) |
- |
|
|
|
| 9.1 d) iii ) (Loss of mass test - insulation ) |
- |
|
|
|
| 9.1 d) iii ) (Loss of mass test - Sheath ) |
- |
|
|
|
| 9.1 d) iv ) (Hot deformation - insulation ) |
- |
|
|
|
| 9.1 d) iv ) (Hot deformation - sheath ) |
- |
|
|
|
| 9.1 d) v ) (Heat shock - insulation ) |
- |
|
|
|
| 9.1 d) v ) (Heat shock - Sheath ) |
- |
|
|
|
| 9.1 d) vi ) (Shrinkage - insulation ) |
- |
|
|
|
| 9.1 d) vi ) (Shrinkage : Crack observed - insulation ) |
- |
|
|
|
| 9.1 d) vi ) (Shrinkage - Sheath ) |
- |
|
|
|
| 9.1 d) vi ) (Shrinkage: Crack observed - Sheath ) |
- |
|
|
|
| 10.2 (Voltage test ) |
- |
|
|
|
| 9.1 f) (Insulation resistance test: Volume resistivity ) |
- |
|
|
|
| 9.1 f) (Insulation resistance test : IR constant) |
- |
|
|
|
| 10.4 (Flammability Test ) |
- |
|
|
|
| 11.1 (Manufacturer’s Identification) |
- |
|
|
|
| 11.2 (Cable Code) |
- |
|
|
|
| 12.2 (Marking ) |
- |
|
|
|
| 12.2.1 (Standard marks ) |
- |
|
|
|
|
- |
-
25 m
Excluding except chemical tests |
| 12946 |
CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - CHHATRAPATI SAMBHAJINAGAR
| 7123534
| IS 4985 (2021) |
UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision |
- |
31025 View breakup
For Elastomeric Sealing Ring Socket
Pipe : Rs. 26,825/- , For BIS Samples
Rs. 20,244/-; For Plain Ended/Socket
Ended Pipes : Rs. 20,975, For BIS
Samples Rs. 15,856/-; For Plumbing
Pipes : Rs. 9,975, For BIS Samples
Rs. 7,606/-; For PVC Resin : Rs.
4,100/- , For BIS Samples Rs. 3,075/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10.1(Colour) |
- |
300 |
|
- |
| 10.1(Surface Finish) |
- |
300 |
|
- |
| 7.2.1.1 Table3(Angle of taper (Note-1)) |
- |
250 |
|
- |
| 10.7(Sulphated Ash Content) |
- |
950 |
|
- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum)) |
- |
250 |
|
- |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum)) |
- |
250 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum)) |
- |
250 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length) |
- |
250 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum)) |
- |
250 |
|
- |
| 9.1(PIPE ENDS) |
- |
300 |
|
- |
| 10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity) |
- |
575 |
|
- |
| 10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test) |
- |
1000 |
|
700+300 |
| 10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature) |
- |
1100 |
|
- |
| 10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density) |
- |
500 |
|
- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)) |
- |
11000 |
|
- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)) |
- |
850 |
|
- |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets) |
- |
11000 |
|
- |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets) |
- |
850 |
|
- |
| 11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes) |
- |
850 |
|
- |
| 11.2(Resistance to External Blows at 0°C) |
- |
1400 |
|
1100+300 |
| 10.3(Effect on Water Test) |
- |
3000 |
|
- |
| 6.1.2(PVC Resin) |
- |
4100 |
|
3000+1100 |
|
31 Dec, 2026 |
-
REVISED VERSION OF IS 4985:2021 INCLUDED W.E.F. 14-10-2021. Size upto 400mm. |
| 12947 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 1422 (1983) |
Specification for cotton duck (third revision) |
- |
Hence complete testing charges for the product are Rs.3 View breakup
Hence complete testing charges for the product are Rs.3900.00
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4.2, Table 2, Sr. No. 1 (Scouring loss, Scoured or Dyed) |
- |
|
|
|
| Cl 4.2, Table 2, Sr. No. 1 (Scouring loss, Grey) |
- |
|
|
|
| Cl 4.2, Table 2, Sr. No. 2 (pH value ) |
- |
|
|
|
|
- |
-
Except Color fastness to light. 05 Pieces (Full width x 3 metres) |
| 12948 |
Matrix Test Labs
| 8138626
| IS 16333 : Part 3 (2017) |
Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision) |
- |
25000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(Inputting of text) |
- |
10000 |
|
10% discount to BIS |
| 5.2(Message Readability) |
- |
15000 |
|
10% discount to BIS |
|
31 Dec, 2026 |
-
- |
| 12949 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 9873 : Part 2 (2017) |
Safety of toys: Part 2 flammability (Third Revision) |
- |
Rs.2144/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.2(a)-5.2 (Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more) |
- |
|
|
|
| 4.2.2(b)-5.2 (Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm) |
- |
|
|
|
| 4.2.3-5.3 (Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame) |
- |
|
|
|
| 4.2.3-5.3 (Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame) |
- |
|
|
|
| 4.2.4-5.3 (Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame) |
- |
|
|
|
| 4.2.4-5.3 (Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame) |
- |
|
|
|
| 4.2.5-5.4 (Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame) |
- |
|
|
|
| 4.2.5-5.4 (Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child
) |
- |
|
|
|
| 4.3-5.4 (Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame) |
- |
|
|
|
| 4.3-5.4 (Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child) |
- |
|
|
|
| 4.3 (Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play) |
- |
|
|
|
| 4.4-5.4 (Toys intended to be entered by a child-rate of spread of flame) |
- |
|
|
|
| 4.5-5.5 (Soft-filled toys-rate of spread of flame ) |
- |
|
|
|
| 4.5-5.5 (Soft-filled toys-Test for soft-filled toys
) |
- |
|
|
|
| 4.1 (General) |
- |
|
|
|
|
- |
-
Complete |
| 12950 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 9873 : Part 1 (2019) |
Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision) |
- |
16,189 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2 - 5.24.2 ( Reasonably foreseeable abuse -Drop Test) |
- |
|
|
|
| 4.2 - 5.24.6.2 ( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys) |
- |
|
|
|
| 4.2 - 5.24.6.3 ( Reasonably foreseeable abuse -Tension test for pompoms) |
- |
|
|
|
| 4.2 - 5.24.6.4 ( Reasonably foreseeable abuse -Tension test for protective components) |
- |
|
|
|
| 4.2 - 5.24.6.5 ( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup) |
- |
|
|
|
| 4.2 - 5.24.7 ( Reasonably foreseeable abuse -Compression test) |
- |
|
|
|
| 4.3.2 - 5.21 ( Expanding materials) |
- |
|
|
|
| 4.4.1 - 5.2 (Small parts-For children under 36 months) |
- |
|
|
|
| 4.4.2 - 5.2 (Small parts-For children 36 months and over but under 72 months
) |
- |
|
|
|
| 4.5.1.2 - 5.3 (Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys) |
- |
|
|
|
| 4.5.1.3 - 5.3 (Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular
flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children
under 18 months-Test for shape and size of certain toys) |
- |
|
|
|
| 4.5.1.4 - 5.3 (Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical,
or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys) |
- |
|
|
|
| 4.5.2 - 5.4 (Shape, size and strength of certain toys-Small balls-Small balls test) |
- |
|
|
|
| 4.5.3 - 5.5 (Shape, size and strength of certain toys-Pompoms-Test for pompoms) |
- |
|
|
|
| 4.7.1 - 5.9 (Points-Accessible sharp points-sharp-point test) |
- |
|
|
|
| 4.9 - c - 5.9 ( Metal wires and rods-Sharp Point test) |
- |
|
|
|
| 4.11.2.1(a) - 5.11.2 ( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables) |
- |
|
|
|
| 4.11.3.1(a) - 5.11.2 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables) |
- |
|
|
|
| 4.11.3.2 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords) |
- |
|
|
|
| 4.11.7 - 5.11.1 (Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional
dimension) |
- |
|
|
|
| 4.11.8 - 5.11.5 (Cords- Self-retracting cords intended for children under 36 months-self-retracting cords) |
- |
|
|
|
| 4.16.2.2(a) - 5.13.2.1 (Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support) |
- |
|
|
|
| 4.16.2.2(a) - 5.13.2.2 (Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids) |
- |
|
|
|
| 4.13.3 (Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys) |
- |
|
|
|
| 4.16.2.2(a) - 5.13.2.2 (Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids) |
- |
|
|
|
| 4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1) (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys) |
- |
|
|
|
| 4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3 (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms) |
- |
|
|
|
| 4.16.2.2(d) (Enclosures-Closures-Lid support for toy chests and similar toys) |
- |
|
|
|
| 4.11.5 - 5.11.2 (Cords-Cords on pull toys-free length) |
- |
|
|
|
| 4.18.3(b) - 5.15.1.3.3 (Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact) |
- |
|
|
|
| 4.18.3(d) - 5.15.2 (Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles) |
- |
|
|
|
| 4.18.3(b) - 5.15.1.3.3 (Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact) |
- |
|
|
|
| 4.18.4.1 - 5.20 (Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys) |
- |
|
|
|
| 4.18.4.3 - 5.15.1.3.3 (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area) |
- |
|
|
|
| 4.18.4.3(a) (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set) |
- |
|
|
|
| 4.24(a) - 5.18 (Toys containing a heat source-determination of temperature increases) |
- |
|
|
|
| 4.25 - 5.19 (Liquid-filled toys-leakage of liquid-filled toys) |
- |
|
|
|
| 4.25 (Liquid-filled toys) |
- |
|
|
|
| 4.2 - 5.24.2 ( Reasonably foreseeable abuse -Drop Test) |
- |
|
|
|
| 4.2 - 5.24.6.2 ( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys) |
- |
|
|
|
| 4.2 - 5.24.6.3 ( Reasonably foreseeable abuse -Tension test for pompoms) |
- |
|
|
|
| 4.2 - 5.24.6.4 ( Reasonably foreseeable abuse -Tension test for protective components) |
- |
|
|
|
| 4.2 - 5.24.6.5 ( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup) |
- |
|
|
|
| 4.2 - 5.24.7 ( Reasonably foreseeable abuse -Compression test) |
- |
|
|
|
| 4.2 - 5.24.8.2 ( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent) |
- |
|
|
|
| 4.2 - 5.24.8.3 ( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent) |
- |
|
|
|
| 4.7.3 (Wooden toys) |
- |
|
|
|
| 4.2 - 5.24.6.1 ((Reasonably foreseeable abuse-General Procedure )) |
- |
|
|
|
| 4.2 - 5.24.5 ( Reasonably foreseeable abuse -Torque test) |
- |
|
|
|
| 4.15.1.3 - 5.12.4 ( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test) |
- |
|
|
|
| 4.2 - 5.24.3 ( Reasonably foreseeable abuse -Tip-over test for large and bulky toys) |
- |
|
|
|
| 4.2 - 5.24.5 ( Reasonably foreseeable abuse -Torque test) |
- |
|
|
|
| 4.3.1 (Material quality) |
- |
|
|
|
| 4.5.4 - 5.6 (Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures) |
- |
|
|
|
| 4.5.5 (Shape, size and strength of certain toys-Toy pacifiers-Nipple length) |
- |
|
|
|
| 4.5.6 (Shape, size and strength of certain toys-Balloons) |
- |
|
|
|
| 4.5.7 (Shape, size and strength of certain toys-Marbles) |
- |
|
|
|
| 4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments) |
- |
|
|
|
| 4.13.5 (Holes, clearances and accessibility of mechanisms-Winding keys) |
- |
|
|
|
| 4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments) |
- |
|
|
|
| 4.2 - 5.24.6.4 ( Reasonably foreseeable abuse -Tension test for protective components) |
- |
|
|
|
| 4.5.8 - a (Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening) |
- |
|
|
|
| 4.5.8 - b (Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider) |
- |
|
|
|
| 4.5.8 - c (Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening ) |
- |
|
|
|
| 4.5.8 - d (Shape, size and strength of certain toys-Hemispheric-shaped toys) |
- |
|
|
|
| 4.8.1 (Projections-General requirments) |
- |
|
|
|
| 4.9(a) - 5.24.8.2 ( Metal wires and rods-wires and other metallic components intended to be bent) |
- |
|
|
|
| 4.9 - c ( Metal wires and rods-Spokes ends) |
- |
|
|
|
| 4.10(a) - 5.10 (Plastic film or plastic bags in packaging and in toys-average thickness) |
- |
|
|
|
| 4.11.5 - 5.11.2 (Cords-Cords on pull toys-free length) |
- |
|
|
|
| 4.12.1(a - 1) (Folding mechanisms-Toy pushchairs, perambulators and similar toys) |
- |
|
|
|
| 4.12.3 (Folding mechanisms-Hinge line clearance) |
- |
|
|
|
| 4.13.4 (Holes, clearances and accessibility of mechanisms-Other driving mechanisms) |
- |
|
|
|
| 4.13.5 (Holes, clearances and accessibility of mechanisms-Winding keys) |
- |
|
|
|
| 4.14(a) (Springs) |
- |
|
|
|
| 4.16.1 (Enclosures-Ventilation) |
- |
|
|
|
| 4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments) |
- |
|
|
|
| 9873 (Part - 3) 4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 ) |
- |
|
|
|
| 9873 (Part - 3) 4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 ) |
- |
|
|
|
| 9873 (Part - 3) 4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 ) |
- |
|
|
|
| 9873 (Part - 3) 4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 ) |
- |
|
|
|
| 9873 (Part - 3) 4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9) |
- |
|
|
|
| 9873 (Part - 3) 4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 ) |
- |
|
|
|
| 9873 (Part - 3) 4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 ) |
- |
|
|
|
| 9873 (Part - 3) 4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9) |
- |
|
|
|
|
- |
-
Except 5.25 Accoustic test
Material declaration required for phthalate test |
| 12951 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 7904 (2018) |
High carbon steel wire rods - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table-1,(Clauses 5.1 and 7.2) (Carbon) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Sulphor) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Phosphorous) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Manganese) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Silicon) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Chromium) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Nickel) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Molybdenum) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Copper) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Nitrogen) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (S+P) |
- |
|
|
|
| Cl 9 (Dimensions & tolerances) () |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Aluminium) |
- |
|
|
|
| 10 (Mechanical Properties (Tensile strength)) |
- |
|
|
|
| 10 (Mechanical Properties (Reduction in Area)) |
- |
|
|
|
| 12 (Surface Defects) |
- |
|
|
|
| 13 (Decarburization Test) |
- |
|
|
|
| 14 (Non-metallic Inclusions (Type A (Sulphide Type) (Thin, worse)) |
- |
|
|
|
| 14 (Type B (Alumina Type) (Thin, worse)) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Boron) |
- |
|
|
|
| TABLE 1 NOTE 1 (Niobium) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Titanium) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Vanadium) |
- |
|
|
|
| TABLE 1 NOTE 1 (Micro Alloy Element (Nb+V+Ti)) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Nitrogen) |
- |
|
|
|
|
- |
-
Chem- Diameter of the wire /rode should b greater than 3 mm |
| 12952 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 1239 : Part 1 (2004) |
Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL) |
For all nominal bore and class |
Rs. 9200/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.2 AND AS PER IS 513 (CARBON) |
- |
|
|
|
| 6.2 AND AS PER IS 10748 (SULPHUR) |
- |
|
|
|
| 6.2 AND AS PER IS 10748 (PHOSPHORUS) |
- |
|
|
|
| 6.2 AND AS PER IS 10748 (MANGANESE) |
- |
|
|
|
| Cl 8 (Outer Diameter, Thickness & Mass) |
- |
|
|
|
| Cl 14 (Tensile Test, Flattening Test & Bend Test) |
- |
|
|
|
| Cl 15 (Workmanship) |
- |
|
|
|
| 6.2 AND AS PER IS 513 (SILICON) |
- |
|
|
|
| 6.2 AND AS PER IS 513 (NITROGEN) |
- |
|
|
|
| 6.2 AND AS PER IS 513 (MICRO ALLOY) |
- |
|
|
|
| 6.2 AND AS PER IS 513 (ALUMINIUM) |
- |
|
|
|
| 6.2 AND AS PER IS 10748 (COPPER) |
- |
|
|
|
| 6.2 AND AS PER IS 10748 (CARBON EQUIVALENT) |
- |
|
|
|
|
- |
-
Facility not available for B,Nb,V,Ti,Ca, Hydrostatic test and thread gauges
Sample required- 1m x1 No + 1.8 m pc for bend test up to 50 mm NB + 50 g drilling + 4 pcsx10 cm |
| 12953 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 8931 (1993) |
copper alloy fancy single taps, combination tap assembly and stop valves for water services |
- |
Rs 3600/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4 (NOMINAL SIZES) |
- |
|
|
|
| Cl 6.7 (Waterway) |
- |
|
|
|
| Cl 6.9 (Body Seat) |
- |
|
|
|
| Cl 6.10 (Bonnet assembly) |
- |
|
|
|
| Cl 6.11 (Gland Packaging) |
- |
|
|
|
| Cl 6.12 (Flanges) |
- |
|
|
|
| Cl 6.13 (Knob) |
- |
|
|
|
| Cl 7.1 (Thickness) |
- |
|
|
|
| Cl 7.2 (Body) |
- |
|
|
|
| Cl 7.3 (Bonnet Assembly) |
- |
|
|
|
| Cl 7.3.3 (Washer Plate) |
- |
|
|
|
| Cl 7.3 (Bonnet Assembly) |
- |
|
|
|
| Cl 8 (Finish) |
- |
|
|
|
|
- |
-
Except critical dimension and performance requirement |
| 12954 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 733 (2025) |
Wrought Aluminium and Aluminium Alloy Bars, Rods, Sections, Extruded Tube, Hollow Sections and Profiles for General Engineering Purposes ? Specification (Fourth Revision) |
For all grades/designations except for the tests mentioned in remarks |
Please see remarks View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4 (General requirements) |
- |
|
|
|
| Cl-6.1, Table-1 to 8 (Cu) |
- |
|
|
|
| Cl-6.1, Table-1 to 8 (Mg) |
- |
|
|
|
| Cl-6.1, Table-1 to 8 (Si) |
- |
|
|
|
| Cl-6.1, Table-1 to 8 (Fe) |
- |
|
|
|
| Cl-6.1, Table-1 to 8 (Zn) |
- |
|
|
|
| Cl-6.1, Table-1 to 8 (Cr) |
- |
|
|
|
| Cl-4 (General requirements) |
- |
|
|
|
| Cl-6.1, Table-1 to 8 (Ti) |
- |
|
|
|
| Cl-6.1, Table-1 to 8 (V) |
- |
|
|
|
| Cl-6.1, Table-1 to 8 (Aluminium) |
- |
|
|
|
| Cl-6.1, Table-1 to 8 (Mn) |
- |
|
|
|
| Cl-7.1, 7.2 & 7.3, Table-9 (Dimensions) |
- |
|
|
|
| Cl-7.1, 7.2 & 7.3, Table-9 (Rm MPa) |
- |
|
|
|
| Cl-7.1, 7.2 & 7.3, Table-9 (Rp0.2 MPa) |
- |
|
|
|
| Cl-7.1, 7.2 & 7.3, Table-9 (Elongation , Percent) |
- |
|
|
|
| Cl-5 (Freedom from Defects) |
- |
|
|
|
|
- |
-
CHEM: COMPLETE (SUBJECT TO THE DECLARATION FOR "OTHER" ELEMENTS REFERRED IN Note 1 of Table 1, Cl 6.1) |
| 12955 |
Central Power Research Institute (CPRI), Bangalore
| 6101024
| IS 16227 : Part 2 (2016) |
Instrument transformers: Part 2 additional requirements for current transformers |
- |
250000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.2.2(Temperature-rise test) |
- |
55250 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.6.201(Test for ratio error and phase displacement of measuring current
transformers) |
- |
850 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.6.202(Determination of the instrument security factor (F S) of measuring current
transformers) |
- |
850 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.6.203(Test for composite error of class P and PR protective current
transformers) |
- |
850 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.6.204(Test for error at limiting conditions for class TPX, TPY and TPZ protective
current transformers) |
- |
850 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.6.205(Test of low-leakage reactance type for class PX and PXR protective
current transformers) |
- |
850 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.6.206(Determination of the remanence factor class PR, TPY, and PXR protective
current transformers) |
- |
850 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.201(Short-time current tests) |
- |
48500 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.3(Impulse voltage withstand test on primary terminals) |
- |
17050 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
| 7.2.5(Electromagnetic Compatibility tests) |
- |
6100 |
|
Test Charges will vary depending on the rating of the sample
Test charge applicable will be intimated through a proforma invoice |
|
31 Dec, 2026 |
-
- |
| 12956 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 319 (2007) |
Free cutting brass bars, rods and section - Specification (Fifth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1 Table 1 (Cu) |
- |
|
|
|
| 8.1 Table 1 (Pb) |
- |
|
|
|
| 8.1 Table 1 (Fe) |
- |
|
|
|
| 8.1 Table 1 (Zn) |
- |
|
|
|
| 10.1 (Mercurous Nitrate Test) |
- |
|
|
|
| 7.0 (Dimension and Tolerances) |
- |
|
|
|
| 9.1 Table-2 (Tensile Strength) |
- |
|
|
|
| 9.1 Table-2 (Elongation) |
- |
|
|
|
| 9.2 (Vickers Hardness) |
- |
|
|
|
|
- |
-
Excluding Cl.4.3.1 S, C(<0.05%), Mo(>1.5%) |
| 12957 |
Central Power Research Institute (CPRI), Bangalore
| 6101024
| IS/IEC 60898 : PART 1 (2015) |
Electrical accessories - Circuit - Breakers for overcurrent protection for household and similar installations: Part 1 circuit - Breakers for a.c. operation (First Revision) |
- |
1022650 View breakup
Test charges for all sequences combined Rs. 750620/-, Rs. 886600/-, Rs. 1076710/-, Rs. 1176070/- for 1, 2, 3, 4 poles respectively;
Test Sequence (A1+ A2): Test sequence A1 Rs. 14260/-, Rs. 17200/-, Rs. 20140/-, Rs. 23080/- for 1, 2, 3, 4 poles respectively; for A2 Rs. 5980/-;
Test Sequence B: Rs. 253820/-, Rs. 273830/-, Rs. 296930/-, Rs. 334730/- for 1, 2, 3, 4 poles respectively;
Test Sequence C Test Sequence C1 : Rs. 161130/-, Rs. 172680/-, Rs. 237210/-, Rs. 251850/- for 1, 2, 3, 4 poles respectively;
Test Sequence C2 : Rs. 63480/-, Rs. 72300/-, Rs. 124890/-, Rs. 133710/- for 1, 2, 3, 4 poles respectively; Test Sequence D (D0 + D1): Test sequence D0 Rs. 61540/-, Rs. 61540/-, Rs. 61540/-, Rs. 61540/- for 1, 2, 3, 4 poles respectively;
Test sequence D1 Rs. 63480/-, Rs. 79200/-, Rs. 84030/-, Rs. 92820/- for 1, 2, 3, 4 poles respectively; Test Sequence E Test Sequence E1: Rs. 63480/-, Rs. 72300/-, Rs. 84030/-, Rs. 92820 for 1, 2, 3, 4 poles respectively;
Test Sequence E2: Rs. 63480/-, Rs. 79200/-, Rs. 84030/-, Rs. 92820/- for 1, 2, 3, 4 poles respectively; Test Sequence E3: Rs. 63480/-, Rs. 79200/-, Rs. 84030/-, Rs. 92820/- for 1, 2, 3, 4 poles respectively;
Test charges will vary depending on the rating of the sample. The applicable test charges will be intimated through a proforma invoice.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6(Marking and other product information, IS 60898-1) |
- |
850 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 8.1.1(General, IS 60898-1) |
- |
850 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 8.1.2(Mechanism, IS 60898-1) |
- |
3400 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.3(Test of indelibility of marking, IS 60898-1) |
- |
850 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 8.1.3(Clearances and creepage distances, IS 60898-1) |
- |
1450 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 8.1.6(Non-interchangeability) |
- |
850 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.4(Test of reliability of screws, current-carrying parts and connections, IS 60898-1) |
- |
3400 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.5.1(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1) |
- |
3400 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.5.2(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1) |
- |
3400 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.5.3(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1) |
- |
3400 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.5.4(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1) |
- |
3400 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.6(Test of protection against electric shock, IS 60898-1) |
- |
1000 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.14.1(Test of resistance to heat, IS 60898-1) |
- |
1700 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.14.2(Test of resistance to heat, IS 60898-1) |
- |
1700 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.14.3(Test of resistance to heat, IS 60898-1) |
- |
1700 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.16(Test of resistance to rusting) |
- |
1700 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.15(Resistance to abnormal heat and to fire) |
- |
5200 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.7.5.4(Test of protection against electric shock, IS 60898-1) |
- |
18000 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.7.1(Test of protection against electric shock, IS 60898-1) |
- |
4000 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.7.2(Test of protection against electric shock, IS 60898-1) |
- |
25500 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.7.3(Test of protection against electric shock, IS 60898-1) |
- |
25500 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.7.4(Test of protection against electric shock, IS 60898-1) |
- |
7650 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.7.5.2(Test of protection against electric shock, IS 60898-1) |
- |
24000 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.8(Test of temperature-rise and measurement of power loss, IS 60898-1) |
- |
35700 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.9(28- day test, IS 60898-1) |
- |
150700 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.11(Verification of mechanical and electrical endurance, IS 60898-1) |
- |
102750 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.12(Short- Circuit tests, IS 60898-1) |
- |
71100 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.12.12(Verification of the circuit-breaker after short-circuit tests) |
- |
45150 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.12.11.2.2(Short-circuit test for verifying the suitability of circuit-breakers for use in IT systems) |
- |
71100 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.10.2(Test of tripping characteristic, IS 60898-1) |
- |
53500 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.10.3(Test of tripping characteristic, IS 60898-1) |
- |
53500 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.10.4(Test of tripping characteristic, IS 60898-1) |
- |
53500 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.10.5(Test of tripping characteristic, IS 60898-1) |
- |
53500 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
| 9.13(Resistance to mechanical shock and impact) |
- |
9600 |
|
Test Charges will vary depending on the No of poles, Rating and Marking of the Sample
Test charge applicable will be intimated through a proforma invoice |
|
31 Dec, 2026 |
-
- |
| 12958 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 318 (1981) |
Specification for leaded tin bronze ingots and castings (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 (Freedom from defects-Ingots) |
- |
|
|
|
| 6.2 (Freedom from defects-Castings) |
- |
|
|
|
| 7.1 (Mass) |
- |
|
|
|
| 7.2 (Dimension) |
- |
|
|
|
|
- |
-
3 bars
Excluding except chemical tests , tensile test |
| 12959 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 617 (2024) |
Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-6.1, Table-1 (Si) |
- |
|
|
|
| Cl-6.1, Table-1 (Fe) |
- |
|
|
|
| Cl-6.1, Table-1 (Cu) |
- |
|
|
|
| Cl-6.1, Table-1 (Mn) |
- |
|
|
|
| Cl-6.1, Table-1 (Mg) |
- |
|
|
|
| Cl-6.1, Table-1 (Cr) |
- |
|
|
|
| Cl-6.1, Table-1 (Ni) |
- |
|
|
|
| Cl-6.1, Table-1 (Zn) |
- |
|
|
|
| Cl-6.1, Table-1 (Pb) |
- |
|
|
|
| Cl-6.1, Table-1 (Sn) |
- |
|
|
|
| Cl-6.1, Table-1 (Ti) |
- |
|
|
|
| Cl-6.1, Table-1 (Others elements Each) |
- |
|
|
|
| Cl-6.1, Table-1 (Others elements Total) |
- |
|
|
|
| Cl-6.1, Table-1 (Aluminium) |
- |
|
|
|
| Cl-6.2 (The chemical analysis) |
- |
|
|
|
| Cl-8 (Freedom from Defects) |
- |
|
|
|
|
- |
-
" 300 mm long x 2 Nos. For Chemical test:5 pcs of 50 mm X 50 mm
Facility for preparation of test specimen not available". |
| 12960 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 4432 (1988) |
Specification for case hardening steels (First Revision) |
For all grades except test mentioned in remarks |
Please see remarks. View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Freedom from Defects) |
- |
|
|
|
| 7 (Hardness) |
- |
|
|
|
| 11 (Dimensional Tolerances) |
- |
|
|
|
| TABLE-1 (Clause-5) ( CARBON) |
- |
|
|
|
| TABLE-1 (Clause-5) (SULPHUR) |
- |
|
|
|
| TABLE-1 (Clause-5) (PHOSPHURS) |
- |
|
|
|
| TABLE-1 (Clause-5) (MANGANESE) |
- |
|
|
|
| TABLE-1 (Clause-5) (SILICON) |
- |
|
|
|
| TABLE-1 (Clause-5) (Chromium) |
- |
|
|
|
| TABLE-1 (Clause-5) (Nickel) |
- |
|
|
|
| TABLE-1 (Clause-5) (Molybdenum) |
- |
|
|
|
| 8 (Mechanical testing) |
- |
|
|
|
| 8.4 (Impact testing) |
- |
|
|
|
| 9 (Grain Size) |
- |
|
|
|
| 10 (Inclusion rating) |
- |
|
|
|
| Cl. 5 (Vanadium) |
- |
|
|
|
| Cl. 5 (Copper) |
- |
|
|
|
|
- |
-
Chem- Except Vanadium |
