| 13141 |
BIS, Central Laboratory (CL)
| None
| IS 9473 (2002) |
Respiratory protective devices - Filtering half masks to protect against particles - Specification (First Revision) |
- |
Rs. 600/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 5.2 (Cleaning and Disinfecting) |
- |
|
|
|
| Cl 5.2 (Cleaning and Disinfecting) |
- |
|
|
|
| 5.2 (Cleaning & Disinfection) |
- |
|
|
|
| Cl 5.13 (De-mountable Parts) |
- |
|
|
|
| Cl 5.13 (De-mountable Parts) |
- |
|
|
|
| 5.13 (Demountable Parts, Visual
Inspection
) |
- |
|
|
|
| Cl 5.6 (Flammability) |
- |
|
|
|
| Cl 5.6 (Flammability) |
- |
|
|
|
| 5.6 (Flammability (TC- 2
Samples)
) |
- |
|
|
|
| 5.6 (Flammability (AR-2
Samples)
) |
- |
|
|
|
| 5.6 (Flammability (TC- 2
Samples)
) |
- |
|
|
|
| 5.6 (Flammability (AR-2
Samples)
) |
- |
|
|
|
| 5.10.2.4 (Exh. Valve Tensile Force
(TC-1 Sample)
) |
- |
|
|
|
| 5.10.2.4 (Exh. Valve Tensile Force
(SW-1 Sample)
) |
- |
|
|
|
| 5.10.2.4 (Exh. Valve Tensile Force
(AR-1 Sample)
) |
- |
|
|
|
| 5.10.2.4 (Exh. Valve Tensile Force
(TC-1 Sample)
) |
- |
|
|
|
| 5.10.2.4 (Exh. Valve Tensile Force
(SW-1 Sample)
) |
- |
|
|
|
| 5.10.2.4 (Exh. Valve Tensile Force
(AR-1 Sample)
) |
- |
|
|
|
|
- |
-
- |
| 13142 |
BIS, Central Laboratory (CL)
| None
| IS 1804 (2004) |
Steel wire ropes – Fibre main cores – Specification (fourth revision) |
- |
4200 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 / 3.2 (Man-Made Fibre CoresMan-made fibre cores shall be made entirely from new
fibres of the following types: ) |
- |
|
|
|
| 5.1 (PHYSICAL REQUIREMENTS / Core Lubrication) |
- |
|
|
|
| 5.2 (PHYSICAL REQUIREMENTS / Lay length) |
- |
|
|
|
| 7.2 (Nominal Diameter and Nominal Runnage) |
- |
|
|
|
| 8 (CORE DESIGNATION) |
- |
|
|
|
| 9 / 9.1 (IDENTIFICATION) |
- |
|
|
|
| 6 / 6.1 (CHEMICAL CONTENTS / Water Soluble Acids ) |
- |
|
|
|
| 6.2 (Salt) |
- |
|
|
|
|
- |
-
Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm; |
| 13143 |
BIS, Central Laboratory (CL)
| None
| IS 17111 (2019) |
Heat - Treated steels, alloy steels and free - Cutting steels - Ball and roller bearing steels |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.7.1.2, Table- 3 (Carbon ) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Sulphur) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Phosphorus) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Manganese) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Silicon) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Aluminium) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Chromium) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Nickel) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Molybdenum) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Copper) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Vanadium) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Titanium) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Zinc) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Tungsten) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Nitrogen) |
- |
|
|
|
| Cl 4 (Classification and designation) |
- |
|
|
|
| Cl 7.5 (Surface quality) |
- |
|
|
|
| Cl 7.6 (Shape, dimensions and tolerances) |
- |
|
|
|
| Cl 7.6 (Shape, dimensions and tolerances) |
- |
|
|
|
| Cl 7.6 (Shape, dimensions and tolerances) |
- |
|
|
|
| Cl 7.6 (Shape, dimensions and tolerances) |
- |
|
|
|
| Cl 7.6 (Shape, dimensions and tolerances) |
- |
|
|
|
|
- |
-
Steel Designation as per Table 3 of IS 17111 may please be declared. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm;
EXCLUDING cl 7.2 microstruct, ii] non metallic inclusions |
| 13144 |
BIS, Central Laboratory (CL)
| None
| IS 1993 (2018) |
Cold - Reduced tinmill products - Electrolytic tinplate (Fifth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 5 (Classification) |
- |
|
|
|
| Cl 6.1 (Designation) |
- |
|
|
|
| Cl 10 (Tolerance on dimension and shape ) |
- |
|
|
|
| Cl 7.3 (Finish) |
- |
|
|
|
| Cl 7.4 (Passivation and oiling) |
- |
|
|
|
| Cl 7.5 (Imperfections) |
- |
|
|
|
| Cl 8 (Tin Coating mass ) |
- |
|
|
|
| Cl 9.2 (Hardness requirement ) |
- |
|
|
|
| Cl 9.3 (Tensile requirement ) |
- |
|
|
|
| Annex-C (Carbon ) |
- |
|
|
|
| Annex-C (Sulphur) |
- |
|
|
|
| Annex-C (Nickel) |
- |
|
|
|
| Annex-C (Manganese) |
- |
|
|
|
| Annex-C (Copper) |
- |
|
|
|
| Annex-C (Chromium) |
- |
|
|
|
| Annex-C (Silicon) |
- |
|
|
|
| Annex-C (Molybdenum) |
- |
|
|
|
|
- |
-
Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm;
EXCLUDING for material < 0.8 mm thikcness only C& S can be tested. Test facility not available for Tin Coating; i] cl 8 tin coating mass, ii] cl 6.3 passivation and oiling, iii] cl 9 proof strength |
| 13145 |
BIS, Central Laboratory (CL)
| None
| IS 10080 (1982) |
Specification for vibration machine for casting standard cement mortar cubes |
- |
Rs.3300.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.4, table 2 (DIMENSIONS AND TOLERANCES) |
- |
|
|
|
| (Cl 3.4.1 of IS 10080 & 5.1 of IS:10086) (Other Requirements (Construction)) |
- |
|
|
|
| (Cl 5.2, IS:10086) (Special Requirements for cube moulds) |
- |
|
|
|
| (Cl 5.3,IS:10086) (Arrangement for Fastening/Clamping) |
- |
|
|
|
|
- |
-
- |
| 13146 |
BIS, Central Laboratory (CL)
| None
| IS 4808 (1982) |
Specification for pyrethrum emulsifiable concentrates (First Revision) |
- |
Rs 6150/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2.1 (Description) |
- |
|
|
|
| 2.2.4 (Flash Point) |
- |
|
|
|
| 2.2.3 (Cold test) |
- |
|
|
|
| 2.2.5 (Emulsion Stability) |
- |
|
|
|
| 2.3 (Total Pyrethrin Content ) |
- |
|
|
|
| 2.2.6 (Heat Stability) |
- |
|
|
|
| 2.2.3 (Cold test) |
- |
|
|
|
| 2.1 (Constituents ) |
- |
|
|
|
|
- |
-
EXCLUDING Cl. 2.2.2 & Cl. 2.3 Identity test & Total Pyrethrin Content; |
| 13147 |
BIS, Central Laboratory (CL)
| None
| IS 9665 (1981) |
Specification for propoxur emulsifiable concentrates |
- |
Rs.5100/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2.1 (Description) |
- |
|
|
|
| 2.2.2 (Cold Test) |
- |
|
|
|
| 2.2.3 (Flash Point) |
- |
|
|
|
| 2.2.4 (Emulsion Stability) |
- |
|
|
|
| 2.3.2 (Acidity) |
- |
|
|
|
| 2.3.1 (Propoxur Content, NV upto 9) |
- |
|
|
|
| 2.3.1 (Propoxur Content, NV above 9 and below 50) |
- |
|
|
|
| 2.3.1 (Propoxur Content, NV above 50) |
- |
|
|
|
|
- |
-
- |
| 13148 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 3062 (1995) |
Crop protection equipment - Rocker sprayer - Specification (Fourth Revision) |
- |
Rs. 4950/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| (F-6) (Workmanship and Finish) |
- |
|
|
|
| Cl. 6.5 (Other requiremnt) |
- |
|
|
|
| (F-4) (Other requiremnt) |
- |
|
|
|
| (F-3) (Performance Requirement) |
- |
|
|
|
| (F-3) (Performance Requirement) |
- |
|
|
|
| (F-3) (Performance Requirement) |
- |
|
|
|
| (Table 1 of IS 3652) (Material) |
- |
|
|
|
| ( F-11) (Type) |
- |
|
|
|
| ( F-11) (Marking) |
- |
|
|
|
| ( D - 4) (Other requirment) |
- |
|
|
|
| ( D - 3) (Dimensions) |
- |
|
|
|
| (D-2 and Table 1 of IS3652) (Material) |
- |
|
|
|
| (D-1) (Types) |
- |
|
|
|
| (D-5) (Marking) |
- |
|
|
|
| ( C - 9 ) (ii) Leakage and Reliability test) |
- |
|
|
|
| ( C - 8 ) (Tests (C-7) i) Strength test) |
- |
|
|
|
| ( C - 6) (Operating Trigger/ Knob) |
- |
|
|
|
| ( C - 5 ) (Gaskets ) |
- |
|
|
|
| (C-4) (End Fittings i) Inlet ii) outlet) |
- |
|
|
|
| ( C - 2) (Dimensions) |
- |
|
|
|
| Table 1 of IS 3652 ) (Material) |
- |
|
|
|
| (C-10) (Types ( C-1 )) |
- |
|
|
|
| (C-10) (Marking) |
- |
|
|
|
| (Cl. 9.1) (MARKING) |
- |
|
|
|
| (Cl.8) (Workmanship and Finish) |
- |
|
|
|
| (Cl. 7) (Other requirements) |
- |
|
|
|
| (Cl. 6.11) (Total Mass) |
- |
|
|
|
| (Cl. 6.10) (Gaskets) |
- |
|
|
|
| 4.8.2 (c) test for hose connection) |
- |
|
|
|
| 4.8.2 (b) For cut- off device ) |
- |
|
|
|
| 4.8.2 ( Hose Connections a) For delivery spout ) |
- |
|
|
|
| (Cl. 6.9 , 4.8.1 ) (Discharge Line, Delivery hose) |
- |
|
|
|
| 4.7.3 ( b) For Strainer Body) |
- |
|
|
|
| 4.7.3 ( Hose Connections a) For Suction spout) |
- |
|
|
|
| 4.7.2 ( Strainer Assembly a) stainer b) Stainer body) |
- |
|
|
|
| (Cl. 6.8) & 4.7.1 (Suction Line, and suction hose) |
- |
|
|
|
| 4.6.2 ( Delivery Spout) |
- |
|
|
|
| 4.6.1 & 6.7 (Suction , delivery spout and suctionspout) |
- |
|
|
|
| Cl. 6.5 (Pressure Chamber) |
- |
|
|
|
| Cl. 6.5 (Pressure Chamber) |
- |
|
|
|
| Cl. 6.5 (Pressure Chamber) |
- |
|
|
|
| 4.4.4 ( Piston Rod) |
- |
|
|
|
| 4.4.4 ( Piston Rod) |
- |
|
|
|
| 4.4.3 (Piston Spreaded) |
- |
|
|
|
| 4.4.2 ( Piston) |
- |
|
|
|
| Cl. 6.4 and 4.4.1 (Pump and pump cylinder) |
- |
|
|
|
| Cl. 6.4 and 4.4.1 (Pump and pump cylinder) |
- |
|
|
|
| Cl. 6.4 and 4.4.1 (Pump and pump cylinder) |
- |
|
|
|
| Cl. 6.4 and 4.4.1 (Pump and pump cylinder) |
- |
|
|
|
| Cl. 6.3 (Handle Lever and Extension ) |
- |
|
|
|
| Cl. 6.3 (Handle Lever and Extension ) |
- |
|
|
|
| Cl. 6.3 (Handle Lever and Extension ) |
- |
|
|
|
| Cl. 6.2 (Frame) |
- |
|
|
|
| Cl. 6.1 (Construction Requirment , base board) |
- |
|
|
|
| Cl. 5.3 (Endurance Test) |
- |
|
|
|
| Cl. 5.2 (Volumetric Efficiency) |
- |
|
|
|
| 5 & 5.1 (Performance requirement, Discharge rate) |
- |
|
|
|
| 4.8.2 (Cut-Off Device and , spray lance/ spray Gun) |
- |
|
|
|
| 4.8.2 (Nozzle) |
- |
|
|
|
|
- |
-
- |
| 13149 |
BIS, Central Laboratory (CL)
| None
| IS 17154 (2019) |
Battery operated motorized tricycle - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| (Cl. 8.5) (Test For Finish :) |
- |
|
|
|
| (Cl. 8.3) (Static Load Test :) |
- |
|
|
|
| (Cl. 8.2) (Manoeuverability :) |
- |
|
|
|
| (Cl. 8.1) (Raod Test :) |
- |
|
|
|
| (Cl 7) (FINISH : All the metallic parts other than those mentioned in Cl 6.1 shall have a smooth finish & shall be Zinc plated accordance with Grade No. 1 of IS 1573.) |
- |
|
|
|
| (Cl. 6.14) (Accessories : The following items shall be furnished as accessories:) |
- |
|
|
|
| (Cl. 6.14) (Accessories : The following items shall be furnished as accessories:) |
- |
|
|
|
| (Cl. 6.14) (Accessories : The following items shall be furnished as accessories:) |
- |
|
|
|
| (Cl. 6.14) (Accessories : The following items shall be furnished as accessories:) |
- |
|
|
|
| (Cl. 6.14) (Accessories : The following items shall be furnished as accessories:) |
- |
|
|
|
| (Cl. 6.14) (Accessories : The following items shall be furnished as accessories:) |
- |
|
|
|
| (Cl. 6.14) (Accessories : The following items shall be furnished as accessories:) |
- |
|
|
|
| (Cl. 6.13) (Suitable means shall be provided on the under side of the tricycle for keeping the crutches or walking stick securely and conveniently.) |
- |
|
|
|
| (Cl. 6.12) (Lubrication:) |
- |
|
|
|
| (Cl. 6.11) (Armrest :) |
- |
|
|
|
| (Cl. 6.11) (Armrest :) |
- |
|
|
|
| (Cl. 6.10) (A tool-cum-accessories box shall be provided behind the seat. ) |
- |
|
|
|
| (Cl. 6.9) (Rear Wheel Hub:) |
- |
|
|
|
| (Cl. 6.9) (Rear Wheel Hub:) |
- |
|
|
|
| (Cl. 6.8) (Front Wheel Hub:) |
- |
|
|
|
| (Cl. 6.7) (Brakes :) |
- |
|
|
|
| (Cl. 6.6) (Mudguards :) |
- |
|
|
|
| (Cl. 6.6) (Mudguards :) |
- |
|
|
|
| (Cl. 6.6) (Mudguards :) |
- |
|
|
|
| (Cl. 6.6) (Mudguards :) |
- |
|
|
|
| (Cl. 6.6) (Mudguards :) |
- |
|
|
|
| (Cl. 6.6) (Mudguards :) |
- |
|
|
|
| (Cl. 6.6) (Mudguards :) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims : ) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims : ) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims : ) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims : ) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims : ) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims : Spoke- holes shall be properly punched or drilled.) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims :The rims shall be free from pitting or uneven plating. ) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims :The wheel rims shall be size 24" for front wheel & 26" for rear wheel conforming to IS 624 : 2003.) |
- |
|
|
|
| (Cl. 6.4) (Tyres & Tubes: Tyres used shall be 24'' size for front wheel and 26" for rear wheels, tyres conforming to IS 2414 While tubes shall conform to IS 2415.) |
- |
|
|
|
| (Cl. 6.3) (Driving Mechanisum:) |
- |
|
|
|
| (Cl. 6.2) (Steering Handle Bar: ) |
- |
|
|
|
| (Cl. 6.2) (Steering Handle Bar: ) |
- |
|
|
|
| (Cl. 6.2) (Steering Handle Bar: ) |
- |
|
|
|
| (Cl.6.1) (Frame : ) |
- |
|
|
|
| (Cl.6.1) (Frame : ) |
- |
|
|
|
| (Cl.6.1) (Frame : ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Height of rear wheel supporting frame ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Back height from seat, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Seat width, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Seat length, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Armrest height from seat, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Clearance of footrest from ground, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Length of foot rest, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Width of foot rest, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Overall height, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Overall width, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Overall length, ) |
- |
|
|
|
|
- |
-
- |
| 13150 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 9738 (2003) |
Polyethylene bags for general purposes - Specification (Second Revision) |
All type and thickness |
Rs. 1500/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2 (Classification) |
- |
|
|
|
| 5.0 (Structure & Shape) |
- |
|
|
|
| 7.2 (Length) |
- |
|
|
|
| 7.2,Table 6 (Width) |
- |
|
|
|
| 7.3 (Thickness) |
- |
|
|
|
| 8.1 (Appearance) |
- |
|
|
|
| 8.1.1 (Printing Bags) |
- |
|
|
|
| 8.2 (Water Leak Test) |
- |
|
|
|
| 8.3 (Printing Ink Adhesion Test) |
- |
|
|
|
| 8.4 (Drop Test) |
- |
|
|
|
| 10 (Packing and Marking) |
- |
|
|
|
| 6.0 (Material) |
- |
|
|
|
|
- |
-
Type, length, width and thickness to be declared. |
| 13151 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 2112 (2014) |
Silver and silver alloys, jewellery/ artefacts - Fineness and marking - Specification (Third Revision) |
upto 990 ppt |
Rs.1400.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 (Fineness) |
- |
|
|
|
| 5 (Cadmium) |
- |
|
|
|
| 5 (Lead) |
- |
|
|
|
|
- |
-
10 gm, min. |
| 13152 |
BIS, Patna Branch Laboratory (PBL)
| None
| IS 4984 (2016) |
Polyethylene pipes for water supply - Specification (Fifth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1.4 (PIPE DESCRIPTION) |
- |
|
|
|
| 6.1.3 (PIPE DESCRIPTION) |
- |
|
|
|
| 6, 6.1.2 (PIPE DESCRIPTION) |
- |
|
|
|
| 6, 6.1.1 (PIPE DESCRIPTION) |
- |
|
|
|
| 6, 6.1 (PIPE DESCRIPTION) |
- |
|
|
|
| 6.2.1 (6.1.1 Identification Stripes) |
- |
|
|
|
| 6.2 (Colour) |
- |
|
|
|
| 7.2 (Length) |
- |
|
|
|
| Cl-7.4 (Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported)) |
- |
|
|
|
| 7.4.1.2 (Ovality) |
- |
|
|
|
| 8.2 (Longitudinal Reversion Test) |
- |
|
|
|
| 8.6 (Overall migration) |
- |
|
|
|
| Cl 8.3 (Carbon Black Dispersion) |
- |
|
|
|
| 8.4 ( Melt Flow Rate) |
- |
|
|
|
| 8.7 (Density) |
- |
|
|
|
| Cl. 8.3 (Carbon Black Content) |
- |
|
|
|
| Clause 8.3 (Carbon Black content) |
- |
|
|
|
| 8.5 (Oxidation Induction Time) |
- |
|
|
|
| Cl 8.3 (Carbon Black Dispersion) |
- |
|
|
|
|
- |
-
All test facilities are available as per the IS except-
i. Hydraulic Characteristics (Clause 8.4)
Note-Overall Migration test facility can be done only for Priority Samples (Clause 8.6) |
| 13153 |
BIS, Patna Branch Laboratory (PBL)
| None
| IS 10146 (1982) |
Specification for polyethylene for its safe use in contact with foodstuffs, pharmaceuticals and drinking water zy |
- |
300 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.3 (Pigments and Colourants ) |
- |
|
|
|
| 3.4 (Overall Migration) |
- |
|
|
|
|
- |
-
Test facility is available only for Overall Migration (Clause 3.4) |
| 13154 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 1741 (2019) |
Latex Foam Rubber Products — Specification ( First Revision ) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 13 and Annex F (COMPRESSION SET) |
- |
|
|
|
| 12 and Annex E (AGEING) |
- |
|
|
|
| 11 and Annex D (FLEXING TEST) |
- |
|
|
|
| 11 and Annex D (FLEXING TEST) |
- |
|
|
|
| 10.1 and Table 1 & 2 (DIMENSIONS -Thickness) |
- |
|
|
|
| 10.1 and Table 1 & 2 (DIMENSIONS -width) |
- |
|
|
|
| 10.1 and Table 1 & 2 (DIMENSIONS -Length) |
- |
|
|
|
| 9.0 (ODOUR) |
- |
|
|
|
| 8.0 (COLOUR) |
- |
|
|
|
| 7.3 (MATERIAL AND WORKMANSHIP) |
- |
|
|
|
| 7.2 (MATERIAL AND WORKMANSHIP) |
- |
|
|
|
| 7.1 (MATERIAL AND WORKMANSHIP) |
- |
|
|
|
| 7.1 (MATERIAL AND WORKMANSHIP) |
- |
|
|
|
| 5.1.1 (Indentation Hardness index) |
- |
|
|
|
| 5.1 (GRADES) |
- |
|
|
|
| 4.2 (SIZE AND SHAPE) |
- |
|
|
|
| 4.1 (TYPES) |
- |
|
|
|
| Cl 14 (Manganese Content) |
- |
|
|
|
| Cl 14 (Copper content) |
- |
|
|
|
|
- |
-
1 Sq.m x 2 pieces. 50x50mm 6 complete pieces with proper edges. |
| 13155 |
BIS, Central Laboratory (CL)
| None
| IS 5410 (2013) |
Cement paint - Specification (Second Revision) |
- |
8,870 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.4 (Lead Restriction) |
- |
|
|
|
| Cl.4.8, 7.1 - Table 1 i) (Drying Time, Hard Dry) |
- |
|
|
|
| Cl.4.8, 7.1 - Table 1 ii) (Finish) |
- |
|
|
|
| Cl.4.8, 7.1 - Table 1 iv) (Fastness to light) |
- |
|
|
|
| Cl.4.8, 7.1 - Table 1 iii) (Colour) |
- |
|
|
|
| Cl.4.8, 7.1 - Table 1 v) (Residue on sieve (on dry material)) |
- |
|
|
|
| Cl.4.8, 7.1 - Table 1 vi) (Resistance to dry rubbing) |
- |
|
|
|
| Cl.4.8, 7.1 - Table 1 vii) (Water Repellency) |
- |
|
|
|
| Cl.4.8, 7.1 - Table 1 viii) (Pot life of mixed paint) |
- |
|
|
|
| Cl.4.8, 7.1 - Table 1 ix) (Recoating Properties) |
- |
|
|
|
| Cl.4.1 (Composition - Portland Cement) |
- |
|
|
|
| Cl.4.1 (Composition - Hydrated Lime) |
- |
|
|
|
| Cl.4.1.1 (Freedom from Organic Binders) |
- |
|
|
|
| Cl.4.2 (Preparation for Use) |
- |
|
|
|
| Cl.4.6 (Durability) |
- |
|
|
|
| Cl.4.7 (Keeping Properties) |
- |
|
|
|
|
- |
-
Approved sample for finish and colour parameter is required, Test facility for water repellency is required;
EXCLUDING Finish, colour, Fastness to light, Water repellency; |
| 13156 |
BIS, Central Laboratory (CL)
| None
| IS 4199 (2001) |
Toilet soap, liquid - Specification (Third Revision) |
- |
Rs 2980/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4.7.2.2 (Dermatological Safety(Requirement for ECO MARK)) |
- |
|
|
|
| Cl 4.7.2.1 (Phosphate (Requirement for ECO MARK)) |
- |
|
|
|
| Cl 4.7.2.1 (Synthetic detergent (Requirement for ECO MARK)) |
- |
|
|
|
| Cl.4.6, 6.3.1 - Table 1 - Sl. No.iv) (Synthetic detergent) |
- |
|
|
|
| Cl.4.6, 6.3.1 - Table 1 - Sl. No.iii) (Free caustic Alkali, as K2O) |
- |
|
|
|
| Cl.4.6, 6.3.1 - Table 1 - Sl. No.ii) (Matter insoluble in alcohol) |
- |
|
|
|
| Cl.4.6, 6.3.1 - Table 1 - Sl. No.i) (Total fatty matter) |
- |
|
|
|
| Cl.4.5.1 (Phenolic substances such as cresylic acid, if added) |
- |
|
|
|
| Cl.4.4 (Odour) |
- |
|
|
|
| Cl.4.3 (Sedimentation) |
- |
|
|
|
| Cl.4.2 (Storage) |
- |
|
|
|
| Cl.4.1 (Description) |
- |
|
|
|
|
- |
-
EXCLUDING Clause 4.2.1 of 13498, Clause 4.5 Phenolic Substances; |
| 13157 |
BIS, Central Laboratory (CL)
| None
| IS 6047 (2009) |
Scouring products for utensil cleaning - Specification (First Revision) |
- |
Rs 5290/- (Type 1 to 4) View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.2, Table-1,(ix) (Surface damage) |
- |
|
|
|
| Cl.4.2, Table-1,(viii) (Tough soil cleaning) |
- |
|
|
|
| Cl.4.2, Table-1,(vii) (Cleansing efficacy) |
- |
|
|
|
| Cl.4.2, Table-1,(vi) (Lather) |
- |
|
|
|
| Cl.4.2, Table-1,(v) (Moisture and volatile Matter content at 105 degree C) |
- |
|
|
|
| Cl.4.2, Table-1,(iv) (Matter insoluble in alcohol) |
- |
|
|
|
| Cl.4.2, Table-1,(iii) (Active (reverse) alkalinity) |
- |
|
|
|
| Cl.4.2, Table-1,(ii) (Active matter) |
- |
|
|
|
| Cl.4.2, Table-1,(i) (Retention on 250 microne IS sieve) |
- |
|
|
|
| Clause 4.1 (Description) |
- |
|
|
|
|
- |
-
EXCLUDING Clause 4.2 Table 1 (vi) Lather (vii) Cleaning Efficacy (viii) tough Soil cleaning. (viii) Surface Damage; |
| 13158 |
BIS, Central Laboratory (CL)
| None
| IS 12744 : Part 1 (2013) |
Ready mixed paint, air drying, red oxide - Zinc phosphate, priming - Specification: Part 1 for domestic and decorative applications (First Revision) |
- |
- View breakup
Total Testing Charges excluding Keeping Properties= Rs. 9317.00/-
Total Testing Charges for Keeping Property testing only= Rs. 1650.00/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.5.2 (Lead Restriction) |
- |
|
|
|
| Cl.5.3, 8.1 - Table 1 -i) (Drying time hard dry) |
- |
|
|
|
| Cl.5.3, 8.1 - Table 1 -ii) (Consistency ) |
- |
|
|
|
| Cl.5.3, 8.1 - Table 1 -iii) (Finish) |
- |
|
|
|
| Cl.5.3, 8.1 - Table 1 -iv) (Colour in Natural Daylight) |
- |
|
|
|
| Cl.5.3, 8.1 - Table 1 -v) (Wet Opacity) |
- |
|
|
|
| Cl.5.3, 8.1 - Table 1 -vi) (Pigment Content) |
- |
|
|
|
| Cl.5.3, 8.1 - Table 1 -vii) (Zinc Phosphate) |
- |
|
|
|
| Cl.5.3, 8.1 - Table 1 -viii) (Red Oxide (as Fe2O3) ) |
- |
|
|
|
| Cl.5.3, 8.1 - Table 1 -ix) a) (Flexibility and adhesion a) Scratch Hardness (Load 800 g)) |
- |
|
|
|
| Cl.5.3, 8.1 - Table 1 -ix) b) (Flexibility and adhesion b) Bent Test (with 6.25 mm dia mendrel in type 1 apparatus) |
- |
|
|
|
| Cl.5.3, 8.1 - Table 1 -x) a) (Resistance to humidity under conditions of condensation a) Resistance to humidity (for 7 days)) |
- |
|
|
|
| Cl.5.3, 8.1 - Table 1 -x) b) (Resistance to humidity under conditions of condensation a) Resistance to Salt Spray (for 96 Hours)) |
- |
|
|
|
| Cl.5.3, 8.1 - Table 1 -xi) (Flash Point) |
- |
|
|
|
| Cl.5.3, 8.1 - Table 1 -xii) (Mass) |
- |
|
|
|
| Cl.5.3, 8.1 - Table 1 -xiii) (Keeping Properties) |
- |
|
|
|
|
- |
-
Approved sample is required for finish test;
EXCLUDING Finish; |
| 13159 |
BIS, Central Laboratory (CL)
| None
| IS 428 (2013) |
Washable distemper - Specification (Third Revision) |
- |
Type-1 3,760 Type-2 3,830 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 6.9.2.2 ( Chromium VI and its compund (Requirement for Eco-Mark)) |
- |
|
|
|
| Cl. 6.9.2.2 (Cadmium (Requirement for Eco-Mark)) |
- |
|
|
|
| Cl. 6.9.2.2 (Lead (Requirement for Eco-Mark)) |
- |
|
|
|
| Cl. 6.9.2.1 (Volatile organic compounds (Requirement for Eco-Mark)) |
- |
|
|
|
| Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. ix) (Accelerated storage stability) |
- |
|
|
|
| Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. viii) (Resistance to alkali) |
- |
|
|
|
| Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vii) (Recoating Properties) |
- |
|
|
|
| Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vi) (Residue on sieve, Type 2) |
- |
|
|
|
| Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. vi) (Residue on sieve, Type 1) |
- |
|
|
|
| Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. v) (Fastness to light) |
- |
|
|
|
| Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. iv) (Colour) |
- |
|
|
|
| Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. iii) (Finish) |
- |
|
|
|
| Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. ii) (Consistency ) |
- |
|
|
|
| Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) b) (Drying Time a) Hard Dry, Type 2) |
- |
|
|
|
| Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) b) (Drying Time a) Hard Dry, Type 1) |
- |
|
|
|
| Cl.6.6, Cl.6.7 and 9.1 - Table 1 - Sl. No. i) a) (Drying Time a) Surface Dry, Type 2) |
- |
|
|
|
| Cl.6.6 (Keeping Proterties) |
- |
|
|
|
| Cl.6.5 (Lead Restriction) |
- |
|
|
|
| Cl.6.3 (Application) |
- |
|
|
|
| Cl.6.2 (Thining) |
- |
|
|
|
| Cl.6.1 (Foam and condition) |
- |
|
|
|
|
- |
-
Approved sample for finish and colour parameter is required, Weatherometer for fastness to light parameter;
EXCLUDING Finish, colour, Fastness to light; |
| 13160 |
BIS, Central Laboratory (CL)
| None
| IS 2494 : Part 1 (1994) |
V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision) |
- |
Rs.3000.00. View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10.1 (Elongation) |
- |
|
|
|
| 10.1 (Tensile Strength) |
- |
|
|
|
| 7.2.2 (Matched Belts - Code) |
- |
|
|
|
| 7.2.1 (Matched Belts - Difference) |
- |
|
|
|
| 7.1 (Belt Pitch Length) |
- |
|
|
|
| 6.0 (Designation) |
- |
|
|
|
| 5 Table 2B (Cross sectional dimension) |
- |
|
|
|
| 5 Table 2B (Cross sectional dimension) |
- |
|
|
|
| 5 Table 2A (Cross sectional dimension) |
- |
|
|
|
| 5 Table 2A (Cross sectional dimension) |
- |
|
|
|
| 5 Table 2A (Cross sectional dimension) |
- |
|
|
|
| 5 Table 2A (Cross sectional dimension) |
- |
|
|
|
| 5 Table 2A (Cross sectional dimension) |
- |
|
|
|
| 5 Table 2A (Cross sectional dimension) |
- |
|
|
|
| 5 Table 2A (Cross sectional dimension) |
- |
|
|
|
| 5 Table 2A (Cross sectional dimension) |
- |
|
|
|
| 5 Table 1 (Cross sectional dimension) |
- |
|
|
|
| 5 Table 1 (Cross sectional dimension) |
- |
|
|
|
| 5 Table 1 (Cross sectional dimension) |
- |
|
|
|
| 5 Table 1 (Cross sectional dimension) |
- |
|
|
|
|
- |
-
EXCLUDING -; Only Dimension test Avalible |
| 13161 |
BIS, Central Laboratory (CL)
| None
| IS 7904 (2018) |
High carbon steel wire rods - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table-1,(Clauses 5.1 and 7.2) (Carbon) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Sulphor) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Phosphorous) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Manganese) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Silicon) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Aluminium) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Chromium) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Nickel) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Molybdenum) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Copper) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Boron) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Vanadium) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Titanium) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (Nitrogen) |
- |
|
|
|
| Table-1,(Clauses 5.1 and 7.2) (S+P) |
- |
|
|
|
| Cl 9 (Dimensions & tolerances) () |
- |
|
|
|
|
- |
-
Grade of Steel as per Table 1, Information wrt Micro Alloy addition and type of killing may also be declared. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm can only be tested.;
EXCLUDING -; i] cl 12 surface defects, ii] cl 13 decarburization test, iii] cl 14 non-metallic inclusions, iv] cl 15 microstructure |
| 13162 |
RAJKOT ENGINEERING TESTING AND RESEARCH CENTRE, RAJKOT
| 7167626
| IS 9079 (2018) |
Monoset pumps for clear, cold water for agricultural and water supply purposes - Specification (Third Revision) |
upto 54 kW |
23624.99 View breakup
Up to 3.7 kW:- Rs. 10125
3.8-7.5 kW:- Rs. 11475
7.6-11.0 kW:- Rs. 12825
11.1-15.0 kW:- Rs. 14175
15.1-20.0 kW:- Rs. 15525
20.1-25.0 kW:- Rs. 16875
25.1-30.0 kW:- Rs. 18225
30.1-35.0 kW:- Rs. 19575
35.1-40.0 kW:- Rs. 20925
40.1-45.0 kW:- Rs. 22275
45.1-50.0 kW:- Rs. 23625
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10.1(GENERAL REQUIREMENTS
Casing) |
- |
2 |
|
2 % of total complete testing charge |
| 10.2(GENERAL REQUIREMENTS
Impeller) |
- |
2 |
|
2 % of total complete testing charge |
| 10.3(GENERAL REQUIREMENTS
Shaft) |
- |
2 |
|
2 % of total complete testing charge |
| 7.1(DIRECTION OF ROTATION (Cl 7)) |
- |
2 |
|
2 % of total complete testing charge |
| 7.2(DIRECTION OF ROTATION (Cl 7)) |
- |
2 |
|
2 % of total complete testing charge |
| 9.1(DESIGN
FEATURES (Cl 9)) |
- |
2 |
|
2 % of total complete testing charge |
| 9.2(DESIGN
FEATURES (Cl 9)) |
- |
2 |
|
2 % of total complete testing charge |
| 13.1(Guarantee and tolerances on Pump Performance (Cl 13)) |
- |
2 |
|
2 % of total complete testing charge |
| 13.2(Guarantee and tolerances on Pump Performance (Cl 13)) |
- |
2 |
|
2 % of total complete testing charge |
| 8.2 IS 11346 : 2002(Verification of Guarantee
Rate of flow and head
(Cl.8.2 IS 11346 : 2002)) |
- |
2 |
|
2 % of total complete testing charge |
| 8.2 IS 11346 : 2002(Verification of Guarantee
Rate of flow and head
(Cl.8.2 IS 11346 : 2002)) |
- |
2 |
|
2 % of total complete testing charge |
| 12.5(Efficiency) |
- |
2 |
|
2 % of total complete testing charge |
| Cl.8.3 b IS 11346 : 2002(Overall efficiency) |
- |
2 |
|
2 % of total complete testing charge |
| Cl13.2.3 IS 9079:2002(Current consumption) |
- |
2 |
|
2 % of total complete testing charge |
| 9.1(DESIGN
FEATURES (Cl 9)) |
- |
2 |
|
2 % of total complete testing charge |
| 9.2(DESIGN
FEATURES (Cl 9)) |
- |
2 |
|
2 % of total complete testing charge |
| 13.1(Guarantee and tolerances on Pump Performance (Cl 13)) |
- |
2 |
|
2 % of total complete testing charge |
| 13.2(Guarantee and tolerances on Pump Performance (Cl 13)) |
- |
2 |
|
2 % of total complete testing charge |
| 13.1.1 (8.2 of IS 11346 : 2002)(Verification of Guarantee
Rate of flow and head
(Cl.8.2 IS 11346 : 2002)) |
- |
2 |
|
2 % of total complete testing charge |
| 13.1.1 (8.2 of IS 11346 : 2002)(Verification of Guarantee
Rate of flow and head
(Cl.8.2 IS 11346 : 2002)) |
- |
2 |
|
2 % of total complete testing charge |
| 12.5(Efficiency) |
- |
2 |
|
2 % of total complete testing charge |
| Cl.8.3 b IS 11346 : 2002(Overall efficiency) |
- |
2 |
|
2 % of total complete testing charge |
| Cl13.2.3 IS 9079:2002(Current consumption) |
- |
2 |
|
2 % of total complete testing charge |
| 10.6.2, 10.6.3(Direction of Rotation) |
- |
2 |
|
2 % of total complete testing charge |
| 10.6.1(Terminal Marking) |
- |
2 |
|
2 % of total complete testing charge |
| 13.1.1(The pumpset shall be guaranteed for their performance of the nominal volume rate of flow and the nominal head at the guaranteed
duty point. The overall efficiency of the pumpset shall be guaranteed at the declared duty point only.) |
- |
2 |
|
2 % of total complete testing charge |
| 13.1.2(The guarantee shall be deemed to have been met with, if the measured values of head, volume rate of flow and overall efficiency
are within the limits indicated in clause 8 of IS 11346. However, after applying the tolerance, overall efficiency value shall not be
less than that derived from Fig. 3 to 6.) |
- |
2 |
|
2 % of total complete testing charge |
| 13.1.3(Monoset motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.) |
- |
2 |
|
2 % of total complete testing charge |
| 13.1.4(The tolerance shall apply to guaranteed duty point only.) |
- |
2 |
|
2 % of total complete testing charge |
| 7(Contructional Features) |
- |
2 |
|
2 % of total complete testing charge |
| 7.1(Material of Construction) |
- |
2 |
|
2 % of total complete testing charge |
| 7.2(Gaskets.Seals and packings) |
- |
2 |
|
2 % of total complete testing charge |
| 9(Design Features) |
- |
2 |
|
2 % of total complete testing charge |
| 9.1.1(The pump may be equipped with replaceable bearing and wearing ring, wherever provided.) |
- |
2 |
|
2 % of total complete testing charge |
| 9.1.2(The pump shall be capable to perform as per guaranteed duty point at the manometric suction lift as specified in Table 1.) |
- |
2 |
|
2 % of total complete testing charge |
| 9.3(The manufacturer shall have a system of controlling dimensional accuracy within a scheme of fits and tolerance limits.
The system shall help interchangeability and fitment at site for replacement spares during subsequent repair and maintenance.) |
- |
2 |
|
2 % of total complete testing charge |
| 9.4(The pump efficiency of monoset pumps at duty point as declared by the manufacturer for 2 and 4 poles shall not be less than given in
Fig. 3 to Fig. 6 and beyond this range, the efficiency shall be declared by manufacturer.) |
- |
2 |
|
2 % of total complete testing charge |
| 10.4.1, 10.4.2, 10.4.3, 10.4.4(General Requirements(Balancing)) |
- |
2 |
|
2 % of total complete testing charge |
| 10.5(Provision of Earthing) |
- |
2 |
|
2 % of total complete testing charge |
| 11.8.1(a)(Measurement of stator resistance) |
- |
2 |
|
2 % of total complete testing charge |
| 11.8.1(b)(High Voltage test) |
- |
2 |
|
2 % of total complete testing charge |
| 11.8.1(d)(No load test at rated voltage) |
- |
2 |
|
2 % of total complete testing charge |
| 11.8.1(g)(Reduced voltage running up test at no load) |
- |
2 |
|
2 % of total complete testing charge |
| 11.8.1(f)(Breakaway (starting) torque) |
- |
2 |
|
2 % of total complete testing charge |
| 11.8.1(e)(Locked rotor) |
- |
2 |
|
2 % of total complete testing charge |
| 11.8.1(h)(Temperature rise test at rated voltage) |
- |
2 |
|
2 % of total complete testing charge |
| 11.8.1(j)(Temperature rise test at reduced voltage) |
- |
2 |
|
2 % of total complete testing charge |
| 8.6.5(If four core cable is used, the fourth core is to be used for earthing.) |
- |
2 |
|
2 % of total complete testing charge |
|
25 Mar, 2027 |
-
Flow: up to 83.333 LPS/ 4999.98 LPM/ 299998.8 LPH
Delivery Head: up to 600 MWC
Suction Head: up to 10.19 MWC
Current: 180A
P: 50 to 54000W |
| 13163 |
RAJKOT ENGINEERING TESTING AND RESEARCH CENTRE, RAJKOT
| 7167626
| IS 14220 (2018) |
Openwell submersible pumpsets - Specification (First Revision) |
upto 54 kW |
16200 View breakup
Up to 3.7 kW:- Rs. 6480
3.8-7.5 kW:- Rs. 7560
7.6-11.0 kW:- Rs. 8640
11.1-15.0 kW:- Rs. 9180
15.1-20.0 kW:- Rs. 9720
20.1-25.0 kW:- Rs. 10800
25.1-30.0 kW:- Rs. 11880
30.1-35.0 kW:- Rs. 13500
35.1-40.0 kW:- Rs. 13800
40.1-45.0 kW:- Rs. 14256
45.1-50.0 kW:- Rs. 16200
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1(Design Features) |
- |
2 |
|
2% of total complete testing charge |
| 8.1.1(Design Features) |
- |
2 |
|
2% of total complete testing charge |
| 8.1.4(Design Features) |
- |
2 |
|
2% of total complete testing charge |
| 8.1.5(Design Features) |
- |
2 |
|
2% of total complete testing charge |
| 8.1.5(Design Features) |
- |
2 |
|
2% of total complete testing charge |
| 8.1.7(Design Features) |
- |
2 |
|
2% of total complete testing charge |
| 9(Efficiency) |
- |
2 |
|
2% of total complete testing charge |
| 10(Performance
(Cl 17.1 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Suction and Delivery Ends
(Cl 17.2 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Suction and Delivery Ends
(Cl 17.2.1 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Fluid Passages
(Cl 17.3 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Draining Plugrs
(Cl 17.4 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Lantern Ring
(Cl 17.5 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Casing
(Cl 17.6 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Impeller
(Cl 17.7 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Shaft
(Cl 17.8 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Shaft Couplings
(Cl 17.9 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Bearings
(Cl 17.10 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Bearings
(Cl 17.10.1 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Bearings
(Cl 17.10.2 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10( Stuffing Boxes
(Cl 17.11 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Base Plates
(Cl 17.12 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Name Plate
(Cl 17.14 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Name Plate
(Cl 17.14 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10(Name Plate
(Cl 17.14.1 of IS 5120)) |
- |
2 |
|
2% of total complete testing charge |
| 10.2(Casing) |
- |
2 |
|
2% of total complete testing charge |
| 10.3(Impeller) |
- |
2 |
|
2% of total complete testing charge |
| 10.4.1(Shaft) |
- |
2 |
|
2% of total complete testing charge |
| 10.4.2(Shaft) |
- |
2 |
|
2% of total complete testing charge |
| 10.5.1(Balancing) |
- |
2 |
|
2% of total complete testing charge |
| 10.5.2(Balancing) |
- |
2 |
|
2% of total complete testing charge |
| 10.5.3(Balancing) |
- |
2 |
|
2% of total complete testing charge |
| 10.5.4(Balancing) |
- |
2 |
|
2% of total complete testing charge |
| 10.6.1( Provision for Earthing) |
- |
2 |
|
2% of total complete testing charge |
| 10.6.2( Provision for Earthing) |
- |
2 |
|
2% of total complete testing charge |
| 10.6.3( Provision for Earthing) |
- |
2 |
|
2% of total complete testing charge |
| 10.6.4( Provision for Earthing) |
- |
2 |
|
2% of total complete testing charge |
| 10.7.1(Terminal Marking and Direction of Rotation) |
- |
2 |
|
2% of total complete testing charge |
| 10.7.2(Terminal Marking and Direction of Rotation) |
- |
2 |
|
2% of total complete testing charge |
| 10.7.3(Terminal Marking and Direction of Rotation) |
- |
2 |
|
2% of total complete testing charge |
| 15.2(Laboratory Tests
Cl.8 of IS 11346-2002
Rate of flow and head
Cl.8 of IS 11346-2002) |
- |
2 |
|
2% of total complete testing charge |
| 15.2(Laboratory Tests
Cl.8 of IS 11346-2002
Efficiency
Cl.8.3 of IS 11346-2002) |
- |
2 |
|
2% of total complete testing charge |
| 15.5(Hydrostatic Pressure Test) |
- |
2 |
|
2% of total complete testing charge |
| 16.1.1( Guarantee of Performance) |
- |
2 |
|
2% of total complete testing charge |
| 16.1.2( Guarantee of Performance) |
- |
2 |
|
2% of total complete testing charge |
| 16.1.3( Guarantee of Performance) |
- |
2 |
|
2% of total complete testing charge |
| 16.1.4( Guarantee of Performance) |
- |
2 |
|
2% of total complete testing charge |
| 16.1.5( Guarantee of Performance) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 18.1.3(Marking) |
- |
2 |
|
2% of total complete testing charge |
| 7(Constructional features) |
- |
2 |
|
2% of total complete testing charge |
| 7.1(It is recognized that a number of materials of construction are available to meet the needs for pumps handling clear, cold water.) |
- |
2 |
|
2% of total complete testing charge |
| 7.2(Gaskets, seals and packings used for clear, cold water pumps shall conform to the applicable requirements specified in 5.2 of IS 5120.) |
- |
2 |
|
2% of total complete testing charge |
| 7.3(The motor shall be provided with a breathing attachment like bellows, diaphragm etc; to compensate the volumetric variation of
water inside the motor due to change in the temperature.) |
- |
2 |
|
2% of total complete testing charge |
| 7.4(The motor shall be protected from ingress of well water, sand and other foreign matter by means of cable glands, rubber seals etc.) |
- |
2 |
|
2% of total complete testing charge |
| 7.5(All materials and components for the motor shall be suitable for application in respect of resistance and mechanical performance
to protect it) |
- |
2 |
|
2% of total complete testing charge |
| 7.6(The rotor of the wet type open well submersible motor and rotor in water filled designed motor shall be provided with suitable coating
from corrosion under water. However if suitable anticorrosion additive is added in the water, no separate protection on
rotors is necessary.) |
- |
2 |
|
2% of total complete testing charge |
| 8(Design Features) |
- |
2 |
|
2% of total complete testing charge |
| 8.1.2(The multi-stage pump shaft may be guided through bearings, the bearings may be provided in stage casing, suction housing and
discharge casing, while in case of intermediate bearings, suitable positions may be selected in the overall span.) |
- |
2 |
|
2% of total complete testing charge |
| 8.1.3(The pump may be equipped with replaceable bearing and wearing ring, wherever provided.) |
- |
2 |
|
2% of total complete testing charge |
| 8.1.4(The strainer on the suction shall offer the best compromise amongst restraining large solids from entering the pump and containing
the suction losses to the minimum.) |
- |
2 |
|
2% of total complete testing charge |
| 8.1.5(The pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage
and supply frequency at minimum +5 percent and minimum –15 percent of the guaranteed duty point head up to 30 m.
Above 30 m, the pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated
voltage and supply frequency at minimum +10 percent and minimum –25 percent of the guaranteed duty point head.) |
- |
2 |
|
2% of total complete testing charge |
| 12(Cable) |
- |
2 |
|
2% of total complete testing charge |
| 12.1(Flat/Round cables as per IS694 shall be used) |
- |
2 |
|
2% of total complete testing charge |
| 12.1.2(The size of the conductor shall be adequate and suitable for contineous use under water and in air.
the length of the cable shall be minimum 2 m externallly unless otherwise specified by the customer) |
- |
2 |
|
2% of total complete testing charge |
| 12.1.3(The size and of the cable should be suitably selected so that the voltage drop between control panel and the mptor terminal does
not exeed three percent of the rated voltage) |
- |
2 |
|
2% of total complete testing charge |
| 12.1.4(In case a joint is required to be made between the lead cable supplied with the motor and the user’s cable, a detailed procedure to
make water tight joining shall be supplied by the motor manufacturer.) |
- |
2 |
|
2% of total complete testing charge |
| 12.1.5(If four core cable is used, the fourth core is to be used for earthing.) |
- |
2 |
|
2% of total complete testing charge |
| 14.10.1(Type test) |
- |
2 |
|
2% of total complete testing charge |
| 14.10.1(a)(Insulation Resistance test) |
- |
2 |
|
2% of total complete testing charge |
| 14.10.1(b)(High Voltage test) |
- |
2 |
|
2% of total complete testing charge |
| 14.10.1(c)(Measurement of stator resistance) |
- |
2 |
|
2% of total complete testing charge |
| 14.10.1(d)(No load test at rated voltage) |
- |
2 |
|
2% of total complete testing charge |
| 14.10.1(e)(Reduced voltage running up test at no load) |
- |
2 |
|
2% of total complete testing charge |
| 14.10.1(f)(Locked rotor) |
- |
2 |
|
2% of total complete testing charge |
| 14.10.1(g)(Breakaway (starting) torque) |
- |
2 |
|
2% of total complete testing charge |
| 14.10.1(h)(Leakage current test;) |
- |
2 |
|
2% of total complete testing charge |
| 14.10.1(j)(Temperature rise test at rated voltage) |
- |
2 |
|
2% of total complete testing charge |
| 14.10.1(k)(Temperature rise test at reduced voltage) |
- |
2 |
|
2% of total complete testing charge |
| 16.1(Guarntee of Performance) |
- |
2 |
|
2% of total complete testing charge |
| 16.1.1(The pumpset shall be guaranteed for their performance of the nominal volume rate of flow and the nominal head at the guaranteed
duty point. The overall efficiency of the pumpset shall be guaranteed at the declared duty point only.) |
- |
2 |
|
2% of total complete testing charge |
| 16.1.2(The guarantee shall be deemed to have been met with, if the measured values of head, volume rate of flow and overall efficiency
are within the indicated in IS 11346 limits) |
- |
2 |
|
2% of total complete testing charge |
| 16.1.3(Open well submersible motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.) |
- |
2 |
|
2% of total complete testing charge |
| 16.1.4(The pump shall be tested for the operating head range as per 8.1.5.) |
- |
2 |
|
2% of total complete testing charge |
| 16.1.5(The overloading of motor is that condition when maximum current drawn by the motor exceeds the limit of 1.07 times of the rated
motor current) |
- |
2 |
|
2% of total complete testing charge |
| 16.1.6(The tolerance shall apply to guaranteed duty point only.) |
- |
2 |
|
2% of total complete testing charge |
| 16.1.7(Performance at rated voltage and supply frequency is actual performance of the set. This is better than performance at rated speed,
since in the entire operating head range speed of motor is higher than rated speed, as motor is running in under loaded condition.) |
- |
2 |
|
2% of total complete testing charge |
| 16.1.8(The manufacturer shall specify the minimum submergence of pump unit at duty point.) |
- |
2 |
|
2% of total complete testing charge |
|
25 Mar, 2027 |
-
Flow: up to 83.333 LPS/ 4999.98 LPM/ 299998.8 LPH
Delivery Head: up to 600 MWC
Suction Head: up to 10.19 MWC
Current: 180A
P: 50 to 54000W |
| 13164 |
RAJKOT ENGINEERING TESTING AND RESEARCH CENTRE, RAJKOT
| 7167626
| IS 9283 (2013) |
Motors for submersible pumpsets - Specification (Second Revision) |
upto 54 kW |
16200 View breakup
Up to 3.7 kW:- Rs. 6480
3.8-7.5 kW:- Rs. 7560
7.6-11.0 kW:- Rs. 8640
11.1-15.0 kW:- Rs. 9180
15.1-20.0 kW:- Rs. 9720
20.1-25.0 kW:- Rs. 10800
25.1-30.0 kW:- Rs. 11880
30.1-35.0 kW:- Rs. 13500
35.1-40.0 kW:- Rs. 13800
40.1-45.0 kW:- Rs. 14256
45.1-50.0 kW:- Rs. 16200
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(Construction, IS 9283) |
- |
16200 |
|
2% of total complete testing charge based on kW |
| 5.1.1(Construction, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 5.1.2(Construction, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 5.1.3(Construction, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 5.1.4(Construction, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 5.2.1(Earthing, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 5.2.2(Earthing, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 5.2.3(Earthing, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 5.2.4(Earthing, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 5.2.5(Earthing, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 5.3(Foreign Matter, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 5.5(Finish of Bearings, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 5.6(Balancing of Rotor, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 7.1(Dimensions of Motors, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 7.2.1(Tolerances, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 7.2.2(Tolerances, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 8(Type of duty, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 13(Terminal Markings, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 15.1(Marking, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 15.1(Marking, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 15.1(Marking, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 15.1(Marking, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 15.1(Marking, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 15.1(Marking, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 15.1(Marking, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 15.1(Marking, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 15.1(Marking, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 15.1(Marking, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 15.1(Marking, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 15.1(Marking, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 15.1(Marking, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 15.3(Marking, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 17.1(Performance values, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 17.1(Performance values, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 17.1(Performance values, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 17.1(Performance values, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 18.1(Overload test, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 19(Temperature rise test, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 19(Temperature rise test, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 20(High Voltage test, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 21(Insulation Resistance test, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 22(Speed, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
| 23(Leakage Current test, IS 9283) |
- |
2 |
|
2% of total complete testing charge based on kW |
|
25 Mar, 2027 |
-
Flow: up to 83.333 LPS/ 4999.98 LPM/ 299998.8 LPH
Delivery Head: up to 600 MWC
Suction Head: up to 10.19 MWC
Current: 180A
P: 50 to 54000W |
| 13165 |
Testtex India Laboratories Private Limited, Noida
| 8138306
| IS 4151 (1993.0) |
Protective helmets for motorcycle riders - Specification |
All |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Shell) |
- |
200 |
|
NA |
| 4.5(Metal Parts) |
- |
800 |
|
NA |
| 4.6(Visor) |
- |
550 |
|
Refer to IS 9973 |
| 6.1(General) |
- |
400 |
|
NA |
| 6.2(Shell) |
- |
300 |
|
NA |
| 6.3(Protactive Padding) |
- |
300 |
|
NA |
| 6.4(Retention System) |
- |
700 |
|
NA |
| 5.1(Size) |
- |
300 |
|
NA |
| 6.5(Pheripheral Vision) |
- |
800 |
|
NA |
| 6.6(Visor) |
- |
5500 |
|
Refer to IS 9973 |
| 6.8(Workmanship and Finish) |
- |
500 |
|
NA |
| 8.0(Mass) |
- |
300 |
|
NA |
| 9.1(Impact Absorption) |
- |
5200 |
|
NA |
| 9.2(Resistance to Penetration) |
- |
1000 |
|
NA |
| 9.3(Rigidity test) |
- |
900 |
|
NA |
| 9.4(Dynamic test of Retention System) |
- |
900 |
|
NA |
| 9.5(Audibility test) |
- |
900 |
|
NA |
| 9.6(Retention test) |
- |
800 |
|
NA |
| 9.7(Opening Angle (Visor) test) |
- |
700 |
|
NA |
| 9.8(Flexibility of Peak) |
- |
600 |
|
NA |
|
- |
-
- |
| 13166 |
BIS, Central Laboratory (CL)
| None
| IS 15410 (2003) |
Containers for packaging of natural mineral water and packaged drinking water - Specification |
- |
Rs- 5850.0 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.0 (chem) (MATERIAL) |
- |
|
|
|
| 4.6.2 (TRANSPARANCY) |
- |
|
|
|
| 4.6.3 (LEAKAGE TEST) |
- |
|
|
|
| 4.6.4 (DROP TEST) |
- |
|
|
|
| 4.6.4, clause 8 of IS:2798:1998 (Drop test ) |
- |
|
|
|
| 4.6.3, clause 6 of IS:2798:1998 (Leakage test- c. Air pressure leakage) |
- |
|
|
|
| 4.6.3, clause 6 of IS:2798:1998 (Leakage test- a. Closure leakage ) |
- |
|
|
|
| 4.6.2 Annex A (Transparency) |
- |
|
|
|
| 4.5, IS:2798:1998 (Wall thickness- Bottom, in mm) |
- |
|
|
|
| 4.5, IS:2798:1998 (Wall thickness- Middle , in mm) |
- |
|
|
|
| 4.5, IS:2798:1998 (Wall thickness- Top , in mm ) |
- |
|
|
|
| 4.4 , clause 5 of IS:2798:1998 (Brimful capacity in ml) |
- |
|
|
|
| 4.3 (Workmanship, Finish & Appearance) |
- |
|
|
|
| 4.2 (Design, Shape & Dimension ) |
- |
|
|
|
| 4.6.5 (MIGRATION TEST) |
- |
|
|
|
| 4.6.6 (PORTABILITY TEST) |
- |
|
|
|
| 4.1 (Material) |
- |
|
|
|
| 4.6.6 (chem) (Water Potability test (after 30 days) (a) Taste (b) Odour) |
- |
|
|
|
| 4.6.5.1 (chem) (Colour migration (Container)) |
- |
|
|
|
| 4.6.5.1 (chem) (Colour migration (Caps)) |
- |
|
|
|
| 4.6.5 , IS:9845:1998 (chem) (Migration- b. Amount of extractive) |
- |
|
|
|
| 4.6.5 , IS:9845:1998 (chem) (Migration- a. Amount of extractive) |
- |
|
|
|
| 4.6.5.1 (chem) (Colour migration (Caps)) |
- |
|
|
|
| 4.6.3, clause 6 of IS:2798:1998 (Leakage test- b. Vibration leakage) |
- |
|
|
|
| Clauses 4.6.7.2 and 4.6.7.3 ,S.No(i) (Specific migration for Cap,Barium) |
- |
|
|
|
| Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ii) (Specific migration for Cap,Cobalt) |
- |
|
|
|
| Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iii) (Specific migration for Cap,Copper) |
- |
|
|
|
| Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iv) (Specific migration for Cap,Iron) |
- |
|
|
|
| Clauses 4.6.7.2 and 4.6.7.3 ,S.No(v) (Specific migration for Cap,Lithium) |
- |
|
|
|
| Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vi) (Specific migration for Cap,Manganese) |
- |
|
|
|
| Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vii) (Specific migration for Cap,Zinc) |
- |
|
|
|
| Clauses 4.6.7.2 and 4.6.7.3 ,S.No(viii) (Specific migration for Cap,Antimony) |
- |
|
|
|
| Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ix) ("Specific migration for Cap,Phthalic acid, bis(2-ethylhexyl)
ester (DEHP)") |
- |
|
|
|
|
- |
-
200 ml & 250 ml (50 Empty Bottle + 80 Caps), 500 ml & 1 Litre (30 Empty Bottle + 80 Caps), 2 Litre (15 Empty Bottle + 80 Caps), 5 Litre ( 10 Empty Bottle + 40 Caps), 20 Litre (06 Empty Jar + 40 Caps) |
| 13167 |
DELHI TEST HOUSE, Azadhpur
| 8131406
| IS 9573 : Part 1 (2017) |
Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 1 industrial application (Fourth Revision) |
- |
15000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.15000.00
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.1 (General) |
- |
250 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.2(Material) |
- |
500 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.2.1(Lining) |
- |
200 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.2.2(Reinforcement) |
- |
200 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.2.3(Cover) |
- |
200 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.3
Sub Clause 4.3.1
Table 1(Bore Size) |
- |
200 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.3
Sub Clause 4.3.2 (a)(Thickness of Lining and Cover) |
- |
200 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.3
Sub Clause 4.3.2 (b)(Thickness of Lining and Cover) |
- |
200 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.3
Sub Clause 4.3.3(Length) |
- |
200 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (i) (a)(Tensile Strength- Lining) |
- |
650 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (i) (b)(Tensile Strength- cover) |
- |
650 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (ii) (a)(Elongation at break- Lining) |
- |
650 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (ii) (b)(Elongation at break- cover) |
- |
650 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.2
(a)(Accelerated Ageing Test lining) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.2
(b)(Accelerated Ageing Test lining) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.2
(a)(Accelerated Ageing Test cover) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.2
(b)(Accelerated Ageing Test cover) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.3
(a)(Resistance of Lining to n-pentane) |
- |
1000 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.3
(b)(Resistance of Lining to n-pentane) |
- |
1000 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.1(Adhesion) |
- |
1500 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.2(Low Temperature Flexibility) |
- |
1000 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.3(Flexibility of Hose) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.4(Ozone Resistance) |
- |
2000 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.5
4.5.5.1(Proof pressure test) |
- |
1000 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.5
4.5.5.2(Bursting pressure) |
- |
1000 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.6(Electrical Continuity Test) |
- |
1000 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.7(Burning Behaviour) |
- |
1000 |
|
For BIS samples: 1.5 times of BIS testing charges |
|
17 Jun, 2027 |
-
- |
| 13168 |
DELHI TEST HOUSE, Azadhpur
| 8131406
| IS 9573 : Part 2 (2017) |
Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 2 domestic and commercial application (Fourth Revision) |
- |
15000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.15000/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.2(Material) |
- |
500 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.2.1(Lining) |
- |
0 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.2.2 (a)(Reinforcement) |
- |
0 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.2.2 (b)(Reinforcement) |
- |
0 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.2.3(Cover) |
- |
0 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.3
Sub Clause 4.3.1
Table 1(Bore Size) |
- |
150 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.3
Sub Clause 4.3.2 (a)(Thickness of Lining and Cover) |
- |
150 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.3
Sub Clause 4.3.2 (b)(Thickness of Lining and Cover) |
- |
150 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.3
Sub Clause 4.3.3(Length) |
- |
150 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (i) (a)(Tensile Strength- Lining) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (i) (b)(Tensile Strength- cover) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (ii) (a)(Elongation at break- Lining) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (ii) (b)(Elongation at break- Cover) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.2
(a)(Accelerated Ageing Test lining) |
- |
1000 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.2
(b)(Accelerated Ageing Test lining) |
- |
1000 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.2
(a)(Accelerated Ageing Test cover) |
- |
1000 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.2
(b)(Accelerated Ageing Test cover) |
- |
1000 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.3
(a)(Resistance of Lining to n-pentane) |
- |
1500 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.4
Sub Clause 4.4.3
(b)(Resistance of Lining to n-pentane) |
- |
1500 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.1(Adhesion) |
- |
1500 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.2(Low Temperature Flexibility) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.3(Flexibility of Hose) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.4(Ozone Resistance) |
- |
2000 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.5
4.5.5.1(Proof pressure test) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.5
4.5.5.2(Bursting pressure) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.6(Grip Strength Test) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges |
| Clause 4.5
Sub clause 4.5.7(Burning Behaviour) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges |
|
17 Jun, 2027 |
-
Included w.e.f.28-09-2018. |
| 13169 |
BIS, Central Laboratory (CL)
| None
| IS 1746 (1992) |
Shoe polish, paste - Specification (Third Revision) |
- |
Rs 8700/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.1 (Odour) |
- |
|
|
|
| 4.1.2 (Colour) |
- |
|
|
|
| 4.1.3 (Consistency) |
- |
|
|
|
| 4.1.4 (Applicability) |
- |
|
|
|
| 4.1.6 (colour of water extract) |
- |
|
|
|
| 4.2 (table 1 S.no(i)) (Softeing point of non-volatile matter) |
- |
|
|
|
| 4.2 (table 1 S.no(ii)) (Ash of the non-volatile matter) |
- |
|
|
|
| 4.2 (table 1 S.no(iii)) (pH of water extract
) |
- |
|
|
|
| 4.2 (table 1 S.no(v)) (Flash point of volatile portion,) |
- |
|
|
|
| 4.2 (table 1 S.no(vi)) (Non-volatile matter
) |
- |
|
|
|
|
- |
-
EXCLUDING DISTILLATION RANGE; |
| 13170 |
BIS, Central Laboratory (CL)
| None
| IS 513 : Part 2 (2016) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
- |
3716 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0 (CARBON) |
- |
|
|
|
| 6.0 (SULPHUR) |
- |
|
|
|
| 6.0 (PHOSPHORUS) |
- |
|
|
|
| 6.0 (MANGANESE) |
- |
|
|
|
| 6.0 (SILICON) |
- |
|
|
|
| 6.0 (ALUMINIUM) |
- |
|
|
|
| 6.0 (NITROGEN) |
- |
|
|
|
| 6.0 (MICRO ALLOYS) |
- |
|
|
|
| Cl 7 (UTM) |
- |
|
|
|
| Cl 7 (UTM) |
- |
|
|
|
| Cl 10 (Length, Width & Thickness) |
- |
|
|
|
| Cl. 10 (Out of square) |
- |
|
|
|
| Cl. 10 (Flatness) |
- |
|
|
|
| Cl. 10 (Camber) |
- |
|
|
|
| Cl. 10 (Width (04)) |
- |
|
|
|
| Cl. 10 (Thickness (08)) |
- |
|
|
|
| Cl. 8.5.3 Table 6 (Surface Roughness) |
- |
|
|
|
| Cl. 7.2 Table 7 (Bend Test) |
- |
|
|
|
| Cl 8.5 (Workmanship) |
- |
|
|
|
| 9 (Freedom from defects) |
- |
|
|
|
|
- |
-
sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm c;
EXCLUDING Complete for thickness > 0.8 mm, only C& S can be tested for thickness < 0.8 mm; |
