BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15123 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

13201

BIS, Northern Regional Laboratory (NRL)

None

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

Total charges = Rs.5850.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (chem) (MATERIAL)	-
4.1 (chem) (Workmanship and Finish)	-
4.2 (chem) (Design, Shape & Dimension)	-
4.2 (chem) (a) Peelability)	-
4.3 (chem) (Workmanship, Finish & Appearance)	-
4.4 (chem) (Brimful capacity)	-
4.5 (chem) (a) Wall Thickness, mm Top)	-
4.5 (chem) ((b) Wall Thickness, mm Middle)	-
4.6.3 (chem) (Leakage Test a) Closures leakage test)	-
4.6.3 (chem) (b) Vibration leakage test)	-
4.6.4 (chem) (Drop Test)	-
4.6.5.1.a (Colour migration Test (Container))	-
4.6.5.1.b (Colour migration Test (Cap))	-
4.6.5 (chem) (c. Colour Migration (Cap))	-
4.6.6.a (chem) (Water Potability Test (a) Odour)	-
4.6.6.b (chem) (Water Potability Test (b) Taste)	-
4.5 (chem) ((c) Wall Thickness, mm Bottom)	-
4.6.3 (chem) (c) Air pressure leakage test)	-
4.6.2 (chem) (Transparency,)	-
Cl. 4.6.5 (chem) (Cl. 4.6.5 Overall migration (Caps))	-
4.6.5.1 (chem) (Colour migration (Container))	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (i) (Barium)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii) (Cobalt)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii) (Copper)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iv) (Iron)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (v) (Lithium)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vi) (Manganese)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vii) (Zinc)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (viii) (Antimony)	-
CL 4.6.7.2 and 4.6.7.3, Table 3 (ix) (Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-

-
-

13202

Softlines and Electrical Safety Testing Laboratory TUV Rheinland India Pvt Ltd., Gurgaon (8167106)

8167106

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	750	-
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	750	-
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	1500	-
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	750	-
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	750	-
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	750	-
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	750	-
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	750	-
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	750	-
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	750	-
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	750	-
4.3.2 - 5.21( Expanding materials)	-	1140	-
4.4.1 - 5.2(Small parts-For children under 36 months)	-	500	-
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	500	-
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	500	-
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	500	-
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	500	-
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	500	-
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	500	-
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	500	-
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	500	-
4.5.6(Shape, size and strength of certain toys-Balloons)	-	750	-
4.5.7(Shape, size and strength of certain toys-Marbles)	-	1500	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	500	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening in Base)	-	500	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening not in Base)	-	500	-
4.5.8 - b(Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-	500	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	500	-
4.5.8 - c(Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-	500	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys)	-	500	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-The maximum distance between centrelines of adjacent peaks )	-	500	-
4.5.8 - d(Shape, size and strength of certain toys-Hemispheric-shaped toys-Minimum depth)	-	500	-
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	500	-
4.6.1 b(Edges-Accessible sharp edges of glass or metal- gap between the edge and the adjacent surface)	-	500	-
4.6.2(Edges-Functional sharp edges)	-	500	-
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	500	-
4.6.4( Edges-Edges on moulded toys)	-	500	-
4.6.5( Edges-Edges on exposed bolts or threaded rod)	-	500	-
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	500	-
4.7.2 - a(Points-Functional sharp points)	-	500	-
4.7.2 - b(Points-Functional sharp points)	-	500	-
4.7.3 (Wooden toys)	-	500	-
4.8.1(Projections-General requirments)	-	1500	-
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	750	-
4.9(b) - 5.24.8.3( Metal wires and rods-wires likely to be bent)	-	750	-
4.9 - c( Metal wires and rods)	-	750	-
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	500	-
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	500	-
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	500	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	750	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys- individual thickness)	-	750	-
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	1000	-
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	1000	-
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	1000	-
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	1000	-
4.11.3.1(a) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	1000	-
4.11.3.1(b) - 5.11.3( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-	1000	-
4.11.3.1(b) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	1000	-
4.11.3.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-	1000	-
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	1000	-
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	1000	-
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	1000	-
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	1000	-
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	1000	-
4.11.6(Cords- Electrical cables)	-	1000	-
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	1000	-
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	1000	-
4.11.9.1(Cords-Toys intended to be strung across a cradle, cot, perambulator or carriage)	-	1000	-
4.11.9.2 (Cords-Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage)	-	1000	-
4.11.10(Cords-Cords on toy bags)	-	1000	-
4.11.11 - 5.11.6( Cords, strings and lines for flying toys- electrical resistance)	-	1000	-
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	900	-
4.12.1(a - 2)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	900	-
4.12.1(a - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	900	-
4.12.1(a - 4)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	900	-
4.12.1(a - 5) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	900	-
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	900	-
4.12.1(b - 2) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	900	-
4.12.1(b - 3) - 5.22.2(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	900	-
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	900	-
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.12.3(Folding mechanisms-Hinge line clearance)	-	900	-
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	500	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	500	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	-
4.13.3 - 5.7(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys-accessibility of a part or component)	-	500	-
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	500	-
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	500	-
4.14(a)(Springs)	-	500	-
4.14(b)(Springs)	-	500	-
4.14(c)(Springs)	-	500	-
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	1150	-
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	1150	-
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	1150	-
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	1150	-
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	1150	-
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	1150	-
4.16.1(Enclosures-Ventilation)	-	500	-
4.16.1(Enclosures-Ventilation-No of openings)	-	500	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If two openings))	-	500	-
4.16.1(Enclosures-Ventilation-Distance between openings(If two openings))	-	500	-
4.16.1(Enclosures-Ventilation-Area of Each openings(If One opening))	-	500	-
4.16.1(Enclosures-Ventilation-spacing(If One opening))	-	500	-
4.16.2.1(Enclosures-Closures-Lids, doors and similar devices)	-	1425	-
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	1425	-
4.16.2.2(a)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	1425	-
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	1425	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	1425	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-	1425	-
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	1425	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	900	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 2)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	900	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys-toy pushchairs and perambulators)	-	900	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 4)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	900	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 5) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	900	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 1)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	900	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 2) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	900	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(b - 3) - 5.22.2(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	900	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	900	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (b)(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-	900	-
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	900	-
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	1425	-
4.16.3(Enclosures-Toys that enclose the head)	-	1425	-
4.16.3(Enclosures-Toys that enclose the head-No of openings)	-	1425	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If two openings))	-	1425	-
4.16.3(Enclosures-Toys that enclose the head-Distance between openings(If two openings))	-	1425	-
4.16.3(Enclosures-Toys that enclose the head-Area of Each openings(If One opening))	-	1425	-
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	750	-
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	750	-
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	500	-
4.18.2(b)(Projectile toys-Projectiles)	-	500	-
4.18.2(c)(Projectile toys-Projectiles)	-	500	-
4.18.2(c)(Projectile toys-Projectiles-Radius)	-	500	-
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	500	-
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	750	-
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	750	-
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	750	-
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	750	-
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	500	-
4.18.3(a) - 5.3 - 5.24(Projectile toys-Projectile toys with stored energy-small parts test after reasonably foreseeable abuse testing)	-	750	-
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	1200	-
4.18.3(b)(Projectile toys-Projectile toys with stored energy)	-	1200	-
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	1200	-
4.18.3(c ) - 5.24.5(Projectile toys-Projectile toys with stored energy-torque test)	-	750	-
4.18.3(c ) - 5.24.6.4(Projectile toys-Projectile toys with stored energy- tension test for protective components)	-	750	-
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	1200	-
4.18.3(e )(Projectile toys-Projectile toys with stored energystored energy-Discharge mechanism)	-	500	-
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	750	-
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	1200	-
4.18.4.2(b)(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart)	-	500	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After torque test)	-	750	-
4.18.4.2(c ) - 5.24.5(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After torque test)	-	750	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-After tension test for protective components)	-	750	-
4.18.4.2(c ) - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-Contact area After tension test for protective components)	-	750	-
4.18.4.3 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-	1200	-
4.18.4.3 - 5.15.2(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-wall impact test for projectiles)	-	1200	-
4.18.4.3(a)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	500	-
4.18.4.3(b)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	500	-
4.18.4.3(c)(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-	500	-
4.18.4.6 - 5.24.5(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After torque test)	-	750	-
4.18.4.6 - 5.24.5 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set- kinetic energy per area After torque test)	-	1200	-
4.18.4.6 - 5.24.6.4(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-After tension test for protective components)	-	750	-
4.18.4.6 - 5.24.6.4 - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set-kinetic energy per area After tension test for protective components)	-	1200	-
4.19(Rotors and propellers)	-	750	-
4.2(Aquatic toys)	-	500	-
4.21(a)(Braking)	-	750	-
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	1425	-
4.21(b)(braking)	-	750	-
4.22.1(Toy bicycles-Instructions for use)	-	750	-
4.22.2(Toy bicycles-Determination of maximum saddle height)	-	750	-
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	1425	-
4.22.3 (Toy bicycles-Braking requirements- brake lever dimension(d))	-	750	-
4.22.3 (Toy bicycles-Braking requirements- lever Length(l))	-	750	-
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	1425	-
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	1150	-
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	1425	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand-(Parts made of metals))	-	1425	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of glass or porcelain))	-	1425	-
4.24(b) - 5.18(Toys containing a heat source-rise in temperature of handles, knobs and similar parts which are likely to be touched by hand(Parts made of Plastic or wood ))	-	1425	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy(Parts made of metals))	-	1425	-
4.24(c) - 5.18(Toys containing a heat source- rise in temperature of other accessible parts of the toy( Parts made of other materials))	-	1425	-
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	1425	-
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	500	-
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	750	-
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	750	-
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	750	-
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	500	-
4.28( Percussion caps specifically designed for use in toys)	-	500	-
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	2000	-
4.29(b) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	2000	-
4.29(c) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	2000	-
4.29(d) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	2000	-
4.29(e) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	2000	-
4.29(f) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	2000	-
4.29(g) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	2000	-
4.30.2(Toy scooters-Warnings and instructions for use)	-	500	-
4.30.3 - 5.26 - 5.8(Toy scooters-Strength-After static strength for toy scooters- sharp edge test)	-	1150	-
4.30.3 - 5.26 - 5.9(Toy scooters-Strength-static strength for toy scooters-sharp-point test)	-	1150	-
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	1150	-
4.30.3 - 5.27 - 5.8(Toy scooters-Strength-dynamic strength for toy scooters- sharp-edge test)	-	1500	-
4.30.3 - 5.27 - 5.9(Toy scooters-Strength-dynamic strength for toy scooters-sharp-point test)	-	1500	-
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	1500	-
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	1500	-
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	1150	-
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	750	-
4.30.5(b)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	750	-
4.30.5(c)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	750	-
4.30.5(d)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	750	-
4.30.5(e)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	750	-
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	750	-
4.30.6 ( Toy scooters-Braking)	-	750	-
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	1500	-
4.30.7( Toy scooters-Wheel size(diameter))	-	500	-
4.30.8(Toy scooters-Projections)	-	500	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs Diameter))	-	500	-
4.30.8(Toy scooters-Projections(rounded handlebar grips or plugs space from end))	-	500	-
4.31(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over)	-	500	-
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	900	-
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	500	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index)	-	900	-
4.31.2(a) - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test)	-	500	-
4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	750	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	1500	-
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	750	-
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	750	-
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	1000	-
4.34(Sledges and toboggans with cords for pulling)	-	500	-
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	500	-
9873 (Part - 3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	950	-
9873 (Part - 3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	950	-
9873 (Part - 3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	950	-
9873 (Part - 3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	950	-
9873 (Part - 3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	950	-
9873 (Part - 3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	950	-
9873 (Part - 3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	950	-
9873 (Part - 3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	950	-
9873 (Part - 9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	6000	-
9873 (Part - 9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	6000	-
4.1(Normal use)	-	2000	-
4.3.1(Material quality)	-	500	-
5.24.6.1(Tension Test General procedure)	-	750	-
9873 (Part - 1) 4.2.2 - 5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	2000	-
9873 (Part - 1) 4.2.2(a) - 5.3(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	2000	-
9873 (Part - 1) 4.2.2(b) - 5.3(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	2000	-
9873 (Part - 1) 4.2.3 - 5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	2000	-
9873 (Part - 1) 4.2.3 - 5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	2000	-
9873 (Part - 1) 4.2.4 - 5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	2000	-
9873 (Part - 1) 4.2.5 - 5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	2000	-
9873 (Part - 1) 4.2.5 - 5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	-
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	2000	-
9873 (Part - 2) 4.3 - 5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	2000	-
9873 (Part - 2) 4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	2000	-
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	2000	-
9873 (Part - 2) 4.4 - 5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	-
9873 (Part - 2) 4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	2000	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-rate of spread of flame )	-	2000	-
9873 (Part - 2) 4.5 - 5.5(Soft-filled toys-Test for soft-filled toys )	-	2000	-

19 Jan, 2027

-
-

13203

BIS, Central Laboratory (CL)

None

IS 13049 (1991)

diaphragm type (plastic body) float operated valves for cold water services

Rs.6000.00 excluding material and chemical test. View breakup
Rs.6000.00 excluding material and chemical test.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (NOMINAL SIZE- )	-
6-6.1 (MANUFACTURE AND WORKMANSHIP)	-
6-6.2 (MANUFACTURE AND WORKMANSHIP)	-
7-7.1 (CONSTRUCTION-Inlet Connection- The inlet shank shall be not less than 48 mm In length.)	-
7-7.1-Annex A (CONSTRUCTION-Inlet Connection- External screw on inlet connections shall be such as to meet the test requirements of Annex A.)	-
7-7.2-7.2.1 (CONSTRUCTION-Seats and body)	-
7-7.2-7.2.2 (CONSTRUCTION-Seats and body-In case of detachable type of seats, colour ccding as given below shall be followed ;)	-
7-7.2-7.2.3 (CONSTRUCTION-Seats and body-The distance between the seat outlet orifice and the shutting off face of the diaphragm shall be 15 mm, Min in the fully opened position.)	-
7-7.3 (CONSTRUCTION-Diaphragm-Diaphragms made of synthetic rubber shall have the form and dimensions as required for the operation of the valve.)	-
7-7.4 (CONSTRUCTION-Back Nuts-Annex A)	-
7-7.4 (CONSTRUCTION-Back Nuts-Threads on backnuts shall also comply WIth the test requirements of Annex A.)	-
7-7.5-7.5.1 (CONSTRUCTION-Floats, Float Arm and Assembly-)	-
7-7.5-7.5.2 (CONSTRUCTION-Floats, Float Arm and Assembly-)	-
7-7.5-7.5.3 (CONSTRUCTION-Floats, Float Arm and Assembly-Annex B Initial Deflection shall not be more than 25 mm)	-
7-7.5-7.5.3 (CONSTRUCTION-Floats, Float Arm and Assembly-Annex B Additiononal deflection after loading for 28 days as specified in Annex B shall not be more than 12 mm)	-
7-7.5-7.5.3 (CONSTRUCTION-Floats, Float Arm and Assembly-Annex B Total deflection thus shall not he more than 37 mm)	-
7-7.6-7.6.1 (CONSTRUCTION-Discharge Arrangements)	-
7-7.6-7.6.2 (CONSTRUCTION-Discharge Arrangements)	-
7-7.6-7.6.3 (CONSTRUCTION-Discharge Arrangements)	-
8-8.1 (PERFORMANCE TEST-Hydraulic Test)	-
8-8.2 (PERFORMANCE TEST-Shut Off Test-Annex C)	-
8-8.4 (PERFORMANCE TEST-Flow Test- Annex E)	-
8-8.6 (PERFORMANCE TEST-Test for Hydraulic Pressure on Discbarge Arrangements-Annex G)	-

-
-

13204

BIS, Central Laboratory (CL)

None

IS 15058 (2002)

PVC water - Stops at transverse contraction joints for use in masonry and concrete dams - Specification

Rs.12990.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,4.1 Fig.1 (SHAPE AND DIMENSIONS)	-
5, 5.1 (WORKMANSHIP AND FINISH)	-
5.2 (WORKMANSHIP AND FINISH)	-
3.3 (Colour)	-
3.2 Table 1, iv) Annex A (Water absorption)	-
3.2 Table 1, iii) IS 13360 (Part 5/Sec 11) (Hardness (Shore A))	-
3.2 Table 1, i) IS 13360 (Part 5/Sec 1) (Tensile strength)	-
3.2 Table 1, ii) IS 13360 (Part 5/Sec 1) (Elongation,)	-
3.2 Table 1, v) Annex G of IS 9766 (Cold bend temperature at which samples does not crack)	-
3.2 Table 1,vi) b) Annex B (Accelerated extraction test: Elongation)	-
3.2 Table 1,vi) a) Annex B (Accelerated extraction test Tensile strength)	-
3.2 Table 1,vii) f) Annex C (Stability in effects of alkalies test Dimension change)	-
3.2 Table 1,vii) c) Annex C (Stability in effects of alkalies test Change in hardness at 7 days )	-
3.2 Table 1,vii) b) Annex C (Stability in effects of alkalies test Weight decrease at 7 day)	-
3.2 Table 1,vii) a) Annex C (Stability in effects of alkalies test Weight increase at 7 day)	-
3.2 Table 1,vii) e) Annex C (Stability in effects of alkalies test Weight decrease at 28 days)	-
3.2 Table 1,vii) d) Annex C (Stability in effects of alkalies test Weight increase at 28 days)	-

-
EXCLUDING Test facility not avaialable for Cl.3.2 (Table 1) Cold bend temperature test, Accelerated extraction Test (Tensile test & elongation);

13205

BIS, Central Laboratory (CL)

None

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

Rs.2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl 2.2.2 (Dimensions)	-

-
EXCLUDING Test facility not available for Cl. 6.4 Short Term Hydraulic Test;

13206

BIS, Central Laboratory (CL)

None

IS 14587 (1998)

Prelaminated Medium Density Fibre Board -specification

19200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 (Dimensions and tolerances)	-
10.2, Table-1 (Test for Density)	-
10.4, Table-1 (Test for Water Absorption)	-
10.5 (test for swelling in water)	-
10.6 (test for modulis of rupture)	-
10.7 (Test for tensile strength perpendicular to Surface)	-
10.8 (Test for tensile strength perpendicular to Surface after ageing )	-
10.9 (test screw withdrawal strength)	-
10.12 (test for resistance to crack)	-
10.13 (test for resistance to cigarette burn)	-

-
-

13207

BIS, Central Laboratory (CL)

None

IS 4351 (2003)

Steel Door Frames -

Please see remarks. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Sizes)	-
6.2 (Tolerances)	-
6.3 (Designation)	-
7, Table 2 (Profile)	-
7, Table 2 (Size, X)	-
7, Table 2 (Size, Y)	-
7, Table 2 (Rebate)	-
8.0 (CONSTRUCTION)	-
9.0 (BASE TIES)	-
10.1 (Fixing Lugs (Holdfasts))	-
10.2, Table 3 (Steel butt hinge— medium weight)	-
10.2, Table 3 (Stainless steel butt hinges medium weight)	-
10.2, Table 3 (Steel rising butt hinges)	-
10.2, Table 3 (Mild steel parliament hinges)	-
10.2, Table 3 (Mild steel light weight tee hinges)	-
10.3 (Mortar Guards)	-
10.4 (Aldrops, Sliding Bolts and Tower Bolts)	-
10.5 (Lock Strike Plate)	-
10.6 (Shock Absorbers)	-
11.1 (Pre-treatment and Phosphating)	-
11.2 (Painting)	-
11.3 (Powder Coatings)	-
5, Table 1 (Mild steel sheet (cold rolled))	-
5, Table 1 (Galvanized steel sheets — Plain grade — Lock forming (GPL), Zinc coating 120 g/m2 inchssive of both sides)	-
5, Table 1 (Stainless steel Grade — X07Crl 7 (430) X04Cr19N;; (304 S1 ))	-
5, Table 1 (Mild steel sheet (cold rolled))	-
5, Table 1 (Stainless steel Grade — X07Crl 7 (430) X04Cr19N;; (304 S1 ))	-
5, Table 1 (Galvanized steel sheets — Plain grade — Lock forming (GPL), Zinc coating 120 g/m2 inchssive of both sides)	-

-
-

13208

BIS, Central Laboratory (CL)

None

IS 15833 (2009)

Stainless Steel Tower Bolts -specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.2 (Carbon Content)	-
Clause 4.2 (Sulphur)	-
Clause 4.2 (Phosphorus)	-
Clause 4.2 (Manganese)	-
Clause 4.2 (Silicon)	-
Clause 4.2 (Chromium)	-
Clause 4.2 (nickel)	-
Cl 3 (NOMINAL SIZES)	-
Cl 4 (MATERIAL)	-
Cl 5 (MANUFACTURE)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 6 (DIMENSIONS)	-
Cl 7 (0)	-

-
sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm. Grade as per relevant IS of material may please be declared;

13209

BIS, Central Laboratory (CL)

None

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

Rs 11950/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (Types)	-
7.2 (DIMENSIONS & TOLERANCES )	-
7.2 (DIMENSIONS & TOLERANCES )	-
7.3 (DIMENSIONS & TOLERANCES )	-
8.1 (WORKMANSHIP AND FINISH )	-
8.3 (WORKMANSHIP AND FINISH )	-
10.1.1 (MOISTURE CONTENT)	-
10.1.2, 10.1.2.1 (Table-1) (GLUE ADHESION IN DRY STATE)	-
10.1.3, 10.1.3.1.1 (Table-1) (RESISTANCE TO WATER TEST)	-
10.1.3, 10.1.3.1.2 (RESISTANCE TO WATER TEST)	-
10.1.4 (RESISTANCE TO WATER TEST)	-
10.1.5 (MYCOLOGICAL TEST )	-
10.1.5, 10.1.5.1 (Table-1) (MYCOLOGICAL TEST )	-
10.1.5.2 (MYCOLOGICAL TEST )	-
10.1.6 (TENSILE STRENGTH)	-
10.1.7 (Table-2) (STATIC BENDING STRENGTH)	-
10.1.7 (Table-2) (STATIC BENDING STRENGTH)	-
10.1.8 (Table-3) (WET BENDING STRENGTH)	-
10.1.8 (Table-3) (WET BENDING STRENGTH)	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Average))	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Sum of the Tensile Strength in two directions))	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Perpendicular to grain))	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Parallel to grain))	-
10.1.9(Chem) (RETENTION OF PRESERVATIVE)	-
4.0 (Types)	-
10.1.9 (RETENTION OF PRESERVATIVE)	-

-
-

13210

BIS, Central Laboratory (CL)

None

IS/ISO 3183 (2012)

Petroleum and Natural Gas Industries â€” Steel Pipe for Pipeline Transportation Systems ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 9.2, Table-4 (L175 Or A25, Carbon)	-
Clause 9.2, Table-4 (L175 Or A25, Sulphur)	-
Clause 9.2, Table-4 (L175 Or A25, Phosphorus)	-
Clause 9.2, Table-4 (L175 Or A25, Manganese)	-
Clause 9.2, Table-4 (L175P Or A25P, Carbon)	-
Clause 9.2, Table-5 (L830M or X120M, CE (PCM))	-
Clause 9.2, Table-5 (L830M or X120M, S)	-
Clause 9.2, Table-5 (L830M or X120M, P)	-
Clause 9.2, Table-5 (L830M or X120M, Mn)	-
Clause 9.2, Table-5 (L830M or X120M, Si)	-
Clause 9.2, Table-5 (L830M or X120M, C)	-
Clause 9.2, Table-5 (L690M or X100M, CE (PCM))	-
Clause 9.2, Table-5 (L690M or X100M, S)	-
Clause 9.2, Table-5 (L690M or X100M, P)	-
Clause 9.2, Table-5 (L690M or X100M, Mn)	-
Clause 9.2, Table-5 (L690M or X100M, Si)	-
Clause 9.2, Table-5 (L690M or X100M, C)	-
Clause 9.2, Table-5 (L625M or X90M, CE (PCM))	-
Clause 9.2, Table-5 (L625M or X90M, S)	-
Clause 9.2, Table-5 (L625M or X90M, P)	-
Clause 9.2, Table-5 (L625M or X90M, Mn)	-
Clause 9.2, Table-5 (L625M or X90M, Si)	-
Clause 9.2, Table-5 (L625M or X90M, C)	-
Clause 9.2, Table-5 (L555M or X80M, CE (PCM))	-
Clause 9.2, Table-5 (L555M or X80M, S)	-
Clause 9.2, Table-5 (L555M or X80M, P)	-
Clause 9.2, Table-5 (L555M or X80M, Mn)	-
Clause 9.2, Table-5 (L555M or X80M, Si)	-
Clause 9.2, Table-5 (L555M or X80M, C)	-
Clause 9.2, Table-5 (L485M or X70M, CE (PCM))	-
Clause 9.2, Table-5 (L485M or X70M, CE (IIW))	-
Clause 9.2, Table-5 (L485M or X70M, S)	-
Clause 9.2, Table-5 (L485M or X70M, P)	-
Clause 9.2, Table-5 (L485M or X70M, Mn)	-
Clause 9.2, Table-5 (L485M or X70M, Si)	-
Clause 9.2, Table-5 (L485M or X70M, C)	-
Clause 9.2, Table-5 (L450M or X65M, CE (PCM))	-
Clause 9.2, Table-5 (L450M or X65M, CE (IIW))	-
Clause 9.2, Table-5 (L450M or X65M, S)	-
Clause 9.2, Table-5 (L450M or X65M, P)	-
Clause 9.2, Table-5 (L450M or X65M, Mn)	-
Clause 9.2, Table-5 (L415M or X60M, Si)	-
Clause 9.2, Table-5 (L450M or X65M, C)	-
Clause 9.2, Table-5 (L415M or X60M, CE (PCM))	-
Clause 9.2, Table-5 (L415M or X60M, CE (IIW))	-
Clause 9.2, Table-5 (L415M or X60M, S)	-
Clause 9.2, Table-5 (L415M or X60M, P)	-
Clause 9.2, Table-5 (L415M or X60M, Mn)	-
Clause 9.2, Table-5 (L415M or X60M, Si)	-
Clause 9.2, Table-5 (L415M or X60M, C)	-
Clause 9.2, Table-5 (L390M or X56M, CE (PCM))	-
Clause 9.2, Table-5 (L390M or X56M, CE (IIW))	-
Clause 9.2, Table-5 (L390M or X56M, S)	-
Clause 9.2, Table-5 (L390M or X56M, P)	-
Clause 9.2, Table-5 (L390M or X56M, Mn)	-
Clause 9.2, Table-5 (L390M or X56M, Si)	-
Clause 9.2, Table-5 (L390M or X56M, C)	-
Clause 9.2, Table-4 (L210 Or A, Carbon)	-
Clause 9.2, Table-4 (L210 Or A, Sulphur)	-
Clause 9.2, Table-4 (L210 Or A, Phosphorus)	-
Clause 9.2, Table-4 (L210 Or A, Manganese)	-
Clause 9.2, Table-4 (L245 Or B, Carbon)	-
Clause 9.2, Table-4 (L245 Or B, Sulphur)	-
Clause 9.2, Table-4 (L245 Or B, Phosphorus)	-
Clause 9.2, Table-4 (L245 Or B, Manganese)	-
Clause 9.2, Table-4 (L290 Or X42, Carbon)	-
Clause 9.2, Table-4 (L290 Or X42, Sulphur)	-
Clause 9.2, Table-4 (L290 Or X42, Phosphorus)	-
Clause 9.2, Table-4 (L290 Or X42, Manganese)	-
Clause 9.2, Table-4 (L320 Or X46, Carbon)	-
Clause 9.2, Table-4 (L320 Or X46, Sulphur)	-
Clause 9.2, Table-4 (L320 Or X46, Phosphorus)	-
Clause 9.2, Table-4 (L320 Or X46, Manganese)	-
Clause 9.2, Table-4 (L360 Or X52, Carbon)	-
Clause 9.2, Table-4 (L360 Or X52, Sulphur)	-
Clause 9.2, Table-4 (L360 Or X52, Phosphorus)	-
Clause 9.2, Table-4 (L360 Or X52, Manganese)	-
Clause 9.2, Table-4 (L390 Or X56, Carbon)	-
Clause 9.2, Table-4 (L390 Or X56, Sulphur)	-
Clause 9.2, Table-4 (L390 Or X56, Phosphorus)	-
Clause 9.2, Table-4 (L390 Or X56, Manganese)	-
Clause 9.2, Table-4 (L415 Or X60, Carbon)	-
Clause 9.2, Table-4 (L415 Or X60, Sulphur)	-
Clause 9.2, Table-4 (L415 Or X60, Phosphorus)	-
Clause 9.2, Table-4 (L415 Or X60, Manganese)	-
Clause 9.2, Table-4 (L450 Or X65, Carbon)	-
Clause 9.2, Table-4 (L450 Or X65, Sulphur)	-
Clause 9.2, Table-4 (L450 Or X65, Phosphorus)	-
Clause 9.2, Table-4 (L450 Or X65, Manganese)	-
Clause 9.2, Table-4 (L485 Or X70, Carbon)	-
Clause 9.2, Table-4 (L485 Or X70, Sulphur)	-
Clause 9.2, Table-4 (L485 Or X70, Phosphorus)	-
Clause 9.2, Table-4 (L485 Or X70, Manganese)	-
Clause 9.2, Table-4 (L175 Or A25, Carbon)	-
Clause 9.2, Table-4 (L175 Or A25, Sulphur)	-
Clause 9.2, Table-4 (L175 Or A25, Phosphorus)	-
Clause 9.2, Table-4 (L175 Or A25, Manganese)	-
Clause 9.2, Table-4 (L175P Or A25P, Carbon)	-
Clause 9.2, Table-4 (L175P Or A25P, Sulphur)	-
Clause 9.2, Table-4 (L175P Or A25P, Phosphorus)	-
Clause 9.2, Table-4 (L210 Or A, Manganese)	-

-
sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm. Steel Grade may please be declared; EXCLUDING -; hydraulic test,DWT test,some defect test

13211

BIS, Central Laboratory (CL)

None

IS 4432 (1988)

Specification for case hardening steels (First Revision)

3930 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
TABLE-1 (Clause-5) ( CARBON)	-
TABLE-1 (Clause-5) (SILICON)	-
TABLE-1 (Clause-5) (MANGANESE)	-
TABLE-1 (Clause-5) (Nickel)	-
TABLE-1 (Clause-5) (Chromium)	-
TABLE-1 (Clause-5) (Molybdenum)	-
TABLE-1 (Clause-5) (SULPHUR)	-
TABLE-1 (Clause-5) (PHOSPHURS)	-
TABLE-1 (Clause-5) (TITANIUM)	-
TABLE-1 (Clause-5) (VANADIUM)	-
TABLE-1 (Clause-5) (NIOBIUM)	-
TABLE-1 (Clause-5) ( ALUMINIUM)	-
TABLE-1 (Clause-5) (NITROGEN)	-
4 (Freedom from Defects)	-
7 (Hardness)	-
11 (Dimensional Tolerances)	-

-
sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm. Steel Grade/designation may please be declared; EXCLUDING -; heat treatment

13212

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 261 (1982)

Specification for copper sulphate (Second Revision)

technical

please see remarks View breakup
Rs 2400/- for Tech., Rs 3900/- for Pure

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
1(i) Table 1 (Copper, Tech, A-2)	-
1(ii) Table 1 (Matter insoluble in water, Tech, A-3)	-
1(iii) Table 1 (Soluble iron and aluminium compounds ( as Fe ), Tech, A-4)	-
1(iv) Table 1 (pH value, Tech, A-5)	-
Cl 3.1 (Description, Tech and Pure)	-

-
-

13213

BIS, Southern Regional Laboratory (SRL)

None

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 Table-3 iv c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 Table-3 iv b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 Table-3 iv a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 Table-3 iii b (Setting Time Final)	-
7 Table-3 iii a (Setting Time Initial)	-
7 Table-3 ii b (Expansion by Autoclave)	-
7 Table-3 ii a (Expansion by Le Chatelier)	-
7 Table-3 i. (Fineness)	-
6.1 Table-2 viii (Alkali content)	-
6.1 Table-2 vii (Chloride content)	-
6.1 Table-2 vi (Loss on ignition)	-
6.1 Table-2 v (Total Sulphur Content calculated as Sulphuric Anhydride)	-
6.1 Table-2 iv (Magnesia)	-
6.1 Table-2 iii. (Insoluble residue)	-
6.1 Table-2 ii. (Ratio of percentage of alumina to that of iron oxide)	-
6.1 Table-2 i. (Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-

-
8 kg+500g" Excluding Other than Transverse Strength (Optional)

13214

BIS, Southern Regional Laboratory (SRL)

None

IS 5346 (1994)

Synthetic food colour - Preparations and mixtures - Specification (Second Revision)

Rs. 4100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.5 (Total dye Content)	-
Clause 4.6 Table 1 (Water InsoIuble matter,)	-
Clause 4.6 Table 1 (Lead (as pb) )	-
Clause 4.6 Table 1 (Arsenic(as As))	-
Clause 4.6 Table 1 (Heavy metals)	-

-
Excluding For Synthetic Food Colour Preparations involving Single Dye only (Tartrazine, Carmoisine, Sunset Yellow only)

13215

BIS, Central Laboratory (CL)

None

IS 15644 (2006)

Safety of electric toys

7050.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.0 (Marking and instructions)	-
8.0 (Power Input)	-
9.0 (Heating and abnormal operation)	-
10.0 (Electrical strength at operating temperature)	-
11.1 (Moisture resistance)	-
11.2 (Resistant to humidity)	-
12.0 (Electric strength at room temperature)	-
13.0 (Mechanical strength)	-
14.1 (Construction)	-
14.2 (Construction)	-
14.3 (Construction)	-
14.4 (Construction)	-
14.5 (Construction)	-
14.6 (Construction)	-
14.7 (Construction)	-
14.8 (Construction)	-
14.9 (Construction)	-
14.1 (Construction)	-
14.11 (Construction)	-
14.12 (Construction)	-
14.13 (Construction)	-
14.14 (Construction)	-
15.1 (Protection of cords and wires)	-
15.2 (Protection of cords and wires)	-
16.0 (Components)	-
17 Table-1 (Screws and connections)	-
17 Table-1 (Nominal daimeter of screws made of insulating material)	-
18.0 (Clearance and creepage distance)	-
18.0 (Clearance and creepage distance)	-
18.0 (Clearance and creepage distance)	-
19.1 (Ball pressure test IEC 60695-10-2)	-
19.2.1 (Glow wire test IEC 60695-2-11)	-
19.2.2 (Needle flame test)	-
9873 (Part-1) 4.2-5.24.2 (Reasonably foreseeable abuse -Drop Test)	-
9873 (Part-1) 4.2-5.24.5 (Reasonably foreseeable abuse -Torque test)	-
9873 (Part-1) 4.2-5.24.7 (Reasonably foreseeable abuse -Compression test)	-
9873 (Part-1) 4.4.1-5.2 (Small parts-For children under 36 months)	-
20.0 (Radiation, toxicity and similar hazards)	-
9873 (Part-3) 4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 )	-
9873 (Part-4) 4.11.2 (Edges, points, and small parts)	-
7.1.2 (Marking and instructions )	-
7.2 (Marking and instructions )	-
7.3 (Marking and instructions )	-
7.4 (Marking and instructions )	-
7.5 (Marking and instructions )	-
7.6 (Marking and instructions )	-
9.3 (Heating and abnormal operation)	-
9.4 (Heating and abnormal operation)	-
9.5 (Heating and abnormal operation)	-
9.6 (Heating and abnormal operation)	-
9.7 (Heating and abnormal operation)	-
9.8 (Heating and abnormal operation)	-
5.15 (General Conditions)	-
5.15 (General Conditions)	-
5.15 (General Conditions)	-
5.15 (General Conditions)	-
5.15 (General Conditions)	-
7.1 (Marking and instructions )	-
7.1.1 (Marking and instructions )	-
13.0 ((Mechanical strength))	-
14.15 (Construction)	-
9873 (Part-3) 4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 )	-
9873 (Part-3) 4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 )	-
9873 (Part-3) 4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 )	-
4.1 - Table 1 of (IS 9873-3-2017) (Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 of (IS 9873-3-2017) (Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 of (IS 9873-3-2017) (Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 of (IS 9873-3-2017) (Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
9873 (Part-9) 3 (Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-

-
3 piece

13216

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - CHHATRAPATI SAMBHAJINAGAR

7123534

IS 16352 (2020)

Geosynthetics – High density polyethylene (HDPE) geomembranes for lining – Specification (first revision)

160675 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	925	--
5,3.1, Table2,iii) Type I / II / III / IV / V / VI Annex K(Lowest individual of 10 thickness value)	-	1800	--
5,3.1, Table1,iii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Lowest individual of 10 thickness value)	-	750	Length, Width & thickness
5,3.1, Table 2,v) d) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking elongation)	-	2700	--
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	1350	--
5,3.1, Table 2,xvi) Type I / II / III / IV / V / VI Annex J(Stress crack resistance)	-	1350	--
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	0	--
5,3.1, Table1,xiii) Type I / II / III / IV / V / VI / VII Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	54000	--
5,3.1, Table 2,xiv) Type I / II / III / IV / V / VI Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	2200	--
3, 3.1(MATERIAL AND MANUFACTURE)	-	0	--
3, 3.2(MATERIAL AND MANUFACTURE If two or more pieces of geomembranes are used, the material shall be joined together by a suitable heat sealing process keeping an overlap of at least 2.5 cm. )	-	0	--
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	1350	--
5,3.1, Table 2,vii) Type I / II / III / IV / V / VI Annex D(Puncture resistanc)	-	1100	--
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	1800	--
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F(Hydrostatic resistance)	-	1800	--
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	1350	--
5,3.1, Table1,xi) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black dispersion)	-	700	--
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	90350	conditioning charge-89000.00
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	300	--
6(DIMENSIONS AND TOLERANCES The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.)	-	0	--
7, 7.2(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS)	-	300	--

31 Dec, 2026

-
-

13217

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - CHHATRAPATI SAMBHAJINAGAR

7123534

IS 16647 (2017)

Oriented unplasticized polyvinyl chloride (Pvc - O) pipes for water supply - Specification

53875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.5( Density, g/cc)	-	500	--
9 /9.1 / 27 degree centigrate(MECHANICAL CHARACTERISTICS OF PIPES9./ Resistance to Hydrostatic Pressure)	-	12200	1200+11000
7.3( Opacity)	-	575	--
9.2, table -11( Resistance to External Blows at 0 °C)	-	1000	--
8.2 table-9( Pipe Ends)	-	300	--
5.3(VCM Content)	-	3000	--
5.4( K-Value)	-	1100	--
7.2( Colour)	-	300	--
8.1.1, 8.1.1.2, table-3(Dimension of Pipes / Diameter/8.1.1.2 Diameter at any point)	-	250	--
8.1.2, table 4 to 7(Wall Thickness)	-	250	--
8.1.3 (Length, meter)	-	250	--
8.2 table-9(Dimensions of Integral Socket)	-	250	--
9.3 table-12( Ring Stiffness)	-	1100	--
9.4, annexure-E( Orientation Factor)	-	1400	--
10, table-13( PHYSICAL AND 1CHARACTERISTICS)	-	6200	1100+3000+1000+1100

31 Dec, 2026

-
-

13218

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	0	-
21.5(Classification of Luminaires')	-	0	-
21.6(Marking)	-	500	5% discount for BIS
21.7(Construction)	-	1500	5% discount for BIS
21.8(Creepage Distance and Clearances)	-	1000	5% discount for BIS
21.9(Provision for earthing)	-	1000	5% discount for BIS
21.10(Terminals)	-	1000	5% discount for BIS
21.11(External & Internal Wiring)	-	2000	5% discount for BIS
21.12(Protection against electric shock)	-	1000	5% discount for BIS
21.13(Endurance Tests and Thermal Tests)	-	25000	5% discount for BIS
21.14(Resistance to Dust & Moisture)	-	18000	5% discount for BIS
21.15(Insulation Resistance and Electric Strength)	-	9000	5% discount for BIS
21.16(Resistance to Heat , fire and tracking)	-	10000	5% discount for BIS

19 Mar, 2029

-
Included w.e.f 23.06.2020

13219

BIS, Northern Regional Laboratory (NRL)

None

IS 10500 (2012)

Drinking water - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4. SL No.i)of Table I (Colour)	-
4.SL No.ii) of Table I (Odour)	-
4.SL No.iii)of Table I (pH)	-
4.SL No.v)of Table I (Turbidity, NTU, Max)	-
4.SL No.vi)of Table I (Total dissolved solids, mg/l, max)	-
table 2 sl.no 1 ( Aluminium (as Al), mg/l, Max)	-
table 2 sl.no 2 (Ammonia (as total ammonia-N), mg/l, Max)	-
table 2 sl.no 3 (Anionic detergents (as MBAS), mg/l, Max)	-
table 2 sl.no 4 (Barium (as Ba), mg/l, Max)	-
table 2 sl.no 5 (Boron (as B), mg/l, Max)	-
table 2 sl.no 6 (Calcium (as Ca), mg/l, Max)	-
table 2 sl.no 9 (Copper (as Cu), mg/l, Max)	-
table 2 sl.no 10 ( Fluoride (as F) mg/l, Max)	-
table 2 sl.no 11 (Free residual chlorine, mg/l, Min)	-
table 2 sl.no 12 (Iron (as Fe), mg/l, Max)	-
table 2 sl.no 13 (Magnesium (as Mg), mg/l, Max)	-
table 2 sl.no 14 (Manganese (as Mn), mg/l, Max)	-
table 2 sl.no 15 (Mineral oil, mg/l, Max)	-
table 2 sl.no 16 (Nitrate (as NO3), mg/l, Max)	-
table 2 sl.no 17 (Phenolic compounds (as C6H5OH), mg/l, Max)	-
table 2 sl.no 18 (Selenium (as Se), mg/l, Ma)	-
table 2 sl.no 19 (Silver (as Ag), mg/l, Max)	-
table 2 sl.no 20 (Sulphate (as SO4) mg/l, Max)	-
table 2 sl.no 21 (Sulphide (as H2S), mg/l, Max)	-
table 2 sl.no 22 (Total alkalinity as calcium carbonate, mg/l, Max)	-
table 2 sl.no 23 (Total hardness (as CaCO3 mg/l, Max)	-
table 2 sl.no 24 (Zinc (as Zn), mg/l, Max)	-
TABLE 3 sl no 1 (Cadmium (as Cd), mg/l, Max)	-
TABLE 3 sl no 3 (Lead (as Pb), mg/l, Max)	-
TABLE 3 sl no 4 (Mercury (as Hg), mg/l, Max)	-
TABLE 3 sl no 5 ( Molybdenum (as Mo), mg/l, Max)	-
TABLE 3 sl no 6 (Nickel (as Ni), mg/l, Max)	-
TABLE 3 sl no 7 (Pesticides, µg/l, Max)	-
TABLE 3 sl no 8 (Polychlorinated biphenyls, mg/l,)	-
TABLE 3 sl no 9 (Polynuclear aromatic hydro-carbons (as PAH), mg/l, Max)	-
TABLE 3 sl no 10 (Total arsenic (as As), mg/l, Max)	-
TABLE 3 sl no 11 (Total chromium (as Cr), mg/l, Max)	-
TABLE 5 sl no 1 (Alachlor)	-
TABLE 5 sl no 3 (Atrazine)	-
TABLE 5 sl no 4 ( Alpha HCH)	-
TABLE 5 sl no 5 (Beta HCH)	-
TABLE 5 sl no 6 (Butachlor)	-
TABLE 5 sl no 7 (Chlorpyriphos)	-
TABLE 5 sl no 8 (Delta HCH)	-
TABLE 5 sl no 9 (2,4- Dichlorophenoxyacetic acid)	-
TABLE 5 sl no 10 ( DDT (o, p and p, p – Isomers of DDT, DDE and DDD))	-
TABLE 5 sl no 11 (Endosulfan (alpha, beta, and sulphate))	-
TABLE 5 sl no 12 ( Ethion)	-
TABLE 5 sl no 13 (Gamma — HCH (Lindane))	-
TABLE 5 sl no 14 ( Isoproturon)	-
TABLE 5 sl no 15 (Malathion)	-
TABLE 5 sl no 16 (Methyl parathion)	-
TABLE 5 sl no 17 (Monocrotophos)	-
TABLE 5 sl no 18 (Phorate)	-

-
Excluding chloramines, cyanide, trihalomethanes

13220

BIS, Northern Regional Laboratory (NRL)

None

IS 1806 (2018)

Malted milk foods - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3-Table 1- ix (Bacterial count)	-
4.3-Table 1- x (Coliform count)	-
4.3-Table 1- xi (E. coli)	-
4.3-Table 1- xii (Yeast and mould count)	-
4.3-Table 1- xiii (Salmonella)	-
4.3-Table 1- xiv (Shigella)	-
4.3-Table 1- xv (Vibrio cholerae )	-
4.3-Table 1- xv ( V. parahaemolyticus)	-
4.3-Table 1- xvi (Faecal streptococci )	-
4.3-Table 1- xvi ( Staphylococcusaureas)	-

-
Excluding moisture, Cocoa Powder

13221

BIS, Western Regional Laboratory (WRL)

None

IS 10116 (2015)

Boric acid - Specification (First Revision)

Please see remarks View breakup
Testing Charge for Boric Acid- a) Special Quality (SQ) Grade Rs. 4800/- Testing Charge for Boric Acid- b) Technical (TECH) Grade Rs. 2000/- Testing Charge for Boric Acid- c) Explosive Grade Rs. 2300/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, 4.3, 4.4, Table 1 (Boric acid (as H3BO3 ))	-
4.2, 4.3, 4.4, Table 1 (Moisture)	-
4.2, 4.3, 4.4, Table 1 (Water insoluble matter)	-
4.2, 4.3, 4.4, Table 1 (Heavy metals (as Pb))	-
4.2, 4.3, 4.4, Table 1 (Iron (as Fe))	-
4.2, 4.3, 4.4, Table 1 (Ca)	-
4.2, 4.3, 4.4, Table 1 (As)	-
4.2, 4.3, 4.4, Table 1 (Na)	-
4.2, 4.3, 4.4, Table 1 (Sulphate (as SO4 ))	-
4.2, 4.3, 4.4, Table 1 (Cl)	-
4.2, 4.3, 4.4, Table 1 (Phosphate (PO4 ))	-
4.5 (Additional Requirement for Technical Grade Boric Acid)	-
4.6 (Boric Acid for Use in Explosives)	-
4.2 ( Description)	-

-
-

13222

BIS, Central Laboratory (CL)

None

IS 2074 (2023)

Ready Mixed Paint Air Drying Red Oxide Zinc Chrome Priming -Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (a) (Pigment)	-
Cl-5.1.1 (a) ("Zinc oxide content Chromic anhydride content")	-
Cl-5.1.1 (b) (Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-
Cl-5.3 (Compatibility with Thinner)	-
Cl-5.4 (Freedom from Objectionable Impurities)	-
Cl-5.5 (Lead Restriction)	-
Cl-5.6 & 8 Table-1 (i) (a) (Consistency)	-
Cl-5.6 & 8, Table-1 (i) (b) (Viscosity by ford cup No. 4 at 27±2°C)	-
Cl-5.6 & 8, Table-1 (ii) (Mass, in kg/10 1, Min)	-
Cl-5.6 & 8, Table-1 (iii) ("Drying time, h, Max a) Surface dry b) Hard dry")	-
Cl-5.6 & 8, Table-1 (iv) (a) Finish)	-
Cl-5.6 & 8, Table-1 (iv) (b) Gloss 60° , Max)	-
Cl-5.6 & 8, Table-1 (v) (Fineness of grind, microns, Max)	-
Cl-5.6 & 8, Table-1 (vi) (Colour)	-
Cl-5.6 & 8,, Table-1 (vii) a) (Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-
Cl-5.6 & 8,, Table-1 (vii) b) (Flexibility and adhesion: Scratch hardness)	-
Cl-5.6 & 8, Table-1 (viii) (Flash point)	-
Cl-5.6 & 8,, Table-1 (x) (a) (Resistance to humidity)	-
Cl-5.6 & 8, Table-1 (xi) (Accelerated storage stability test)	-
Cl-5.6 & 8, Table-1 (xii) ("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-
Cl-5.6 & 8, Table-1 (x) (c) (Resistance to salt spray)	-
Cl-5.6 & 8,, Table-1 (ix) (Volume solids, percent)	-
Cl-5.6 & 8, Table-1 (xii) ("Keeping properties Change in skinning")	-
Cl-5.6 & 8, Table-1 (xii) ("Keeping properties Degree of settling ")	-
Cl-5.6 & 8, Table-1 (xii) ("Keeping properties Observation of dried film ")	-
Cl-5.6 & 8, Table-1 (xii) ("Keeping properties Loss of mass resulting from Storage ")	-

-
Test facility is not available for mentioned exclusions parameters; EXCLUDING Volume solids;

13223

BIS, Central Laboratory (CL)

None

IS 14625 (2015)

Plastics Feeding Bottles ( First Revision )

Rs 16930 (Excluding tests for material as per Cl.4.1 an View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Physical Requirements)	-
Cl 5.1.3 (Wall Thickness)	-
Cl 5.1.4 (Capacity)	-
Cl 5.3.2 (Transparecy)	-
Cl 5.3.3 (Leakage Test)	-
Cl 5.3.4 (Drop Test)	-
Cl 5.3.5 (Ageing Resistance)	-
Cl 5.3.6 (Compressive Deformation Resistance)	-
Cl 5.3.7 (Product Resistance of Printed Containers)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Antimony)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Arsenic)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Antimony)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Arsenic)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Chromium)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Cadmium)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Lead)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Barium)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Selenium)	-
Cl 5.1.4.2 (a) (Test for permanency of Pigment)	-
5.3.8 a) (Migration Test a) Distilled water at 40±2° hrs)	-
5.3.8 b) (Migration Test b) n-Haptane at 38±1° C for 30 min)	-
4.1 (Material Identification, Bisphenol A,)	-
Cl.5.2.1.7, Table-1(iii) (Migration of certain elements, Reqiurement as per table 1, Mercury)	-
Cl.5.3.9.2, Table-3(i) (Specific migration , Barium)	-
Cl.5.3.9.2, Table-3(ii) (Specific migration , Cobalt)	-
Cl.5.3.9.2, Table-3(iii) (Specific migration , Copper)	-
Cl.5.3.9.2, Table-3(iv) (Specific migration , Iron)	-
Cl.5.3.9.2, Table-3(v) (Specific migration , Lithium)	-
Cl.5.3.9.2, Table-3(vi) (Specific migration , Manganese)	-
Cl.5.3.9.2, Table-3(vii) (Specific migration , Zinc)	-
Cl.5.3.9.2, Table-3(viii) (Specific migration , Antimony)	-
Clauses 5.3.9.2 and 5.3.9.3,Table 3, S.no.(ix) (Phthalic acid, bis(2-ethylhexyl)ester (DEHP)-ISO 18856)	-

-
60 ml (100 Nos), Above 60 ml (60 Nos), complete facility

13224

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - CHHATRAPATI SAMBHAJINAGAR

7123534

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

92830 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Cord Beading - IS 15907)	-	250	diameter of rope
5.1(MANUFACTURE- IS 15907)	-	500	dimensions
5.2.1(Lamination- IS 15907)	-	250	dimensions
5.2.2(coating thickness of the sandwich lamination- method A of IS 13162 (Part 3))	-	250	dimensions
5.3.1(Construction- IS 15907)	-	250	dimensions
5.3.1(The width of the hem - IS 15907)	-	250	dimensions
5.3.2(Finished width of pocket - IS 15907)	-	250	dimensions
5.4(Bonding- IS 15907)	-	250	dimensions
6- Table 1- SL.No (i)(Mass)	-	500	gsm
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,warp - IS 1969 )	-	1350	1100+250
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,weft - IS 1969 )	-	1350	1100+250
6- Table 1- SL.No (iii)(Elongation at break of fabric- IS 1969)	-	1350	1100+250
6- Table 1- SL.No (iv)(Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-	9360	8260 (UV resistance) +1100
6- Table 1- SL.No (v)(Welded seam strength before UV exposure- IS 1969)	-	1350	1100+250
6- Table 1- SL.No (vi)(Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-	1350	1100+250
6- Table 1- SL.No (vii)(Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-	1350	1100+250
6- Table 1- SL.No (vii)(Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-	1350	1100+250
6- Table 1- SL.No (viii)(Puncture strength - Annex C of IS 15907)	-	1350	1100+250
6- Table 1- SL.No (ix)(Environmental stress cracking test - Annex D of IS 15907)	-	1450	1200+250
6- Table 1- SL.No (x)(Resistance to chemicals, change in the mass - Annex E of IS 15907)	-	2250	2000+250
6- Table 1- SL.No (xi)(Colour fastness to artificial light -IS 2454)	-	1750	1500+250
6- Table 1- SL.No (xii)(Bursting pressure-IS 1966)	-	1350	1100+250
6.1(Length -IS 15907)	-	250	dimensions
6.1(Width - IS 15907)	-	250	dimensions
6.1(Height - IS 15907)	-	250	dimensions
6.2(Water Proofness,IS 7941)	-	1250	1000+250
6.2(Water Proofness, IS 7940)	-	5150	4200 aging charges + 700+250 after aging water proofness

31 Dec, 2026

-
-

13225

BIS, Southern Regional Laboratory (SRL)

None

IS 15644 (2006)

Safety of electric toys

7050.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.0 (Marking and instructions)	-
8.0 (Power Input)	-
9.0 (Heating and abnormal operation)	-
10.0 (Electrical strength at operating temperature)	-
11.1 (Moisture resistance)	-
11.2 (Resistant to humidity)	-
12.0 (Electric strength at room temperature)	-
13.0 (Mechanical strength)	-
14.1 (Construction)	-
14.2 (Construction)	-
14.3 (Construction)	-
14.4 (Construction)	-
14.5 (Construction)	-
14.6 (Construction)	-
14.7 (Construction)	-
14.8 (Construction)	-
14.9 (Construction)	-
19.2.1 (Glow wire test IEC 60695-2-11)	-

-
5 nos Excluding Excluding wheeled ride-on toys, Toys incorporating lasers and light-emitting diodes (Annex E)

13226

BIS, Central Laboratory (CL)

None

IS 44 (1991)

Iron oxide pigments for paints - Specification (Second Revision)

- View breakup
Rs Grade1=8554/- Grade2=9804/- Grade3=7304/- Grade4=8254/- Grade5=7604/- Grade6=8204/- Grade7=8840/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.1 (Composition Grade 1)	-
5.1.2 (Composition Grade 2)	-
5.1.3 (Composition Grade 3)	-
5.1.4 (Composition Grade 4)	-
5.1.5.1 (Composition Grade 5 & Grade 6 Type C)	-
5.1.5.2 (Composition Grade 5 & Grade 6 Type D)	-
5.1.6 (Composition Grade 7)	-
5.2 (Form & Condition)	-
5.3 Table-1 i. (Volatile matter - 7 of IS 33)	-
5.3 Table-1 ii. (Residue on sieve - 8 of IS 33)	-
5.3 Table-1 iii. (Oil absorption - 9 of IS 33)	-
5.3 Table-1 iv (a) (Colour staining power)	-
5.3 Table-1 iv (b) (Colour undertone)	-
5.3 Table-1 v. (Matter insoluble in water - 17 of IS 33)	-
5.3 Table-1 vi. (Sum of water soluble Chloride - Annex-A)	-
5.3 Table-1 vi. (Sum of water soluble Sulphate - Annex-A)	-
5.3 Table-1 vii. (Acidity or Alkalinity - 18 of IS 33)	-
5.3 Table-1 viii. (pH of aqueous extract)	-
5.3 Table-1 ix. (Total Iron - Annex-B)	-
5.3 Table-1 x. (Ferrous Iron - Annex-C)	-
5.3 Table-1 xi. (Carbonates - Annex-D)	-
5.3 Table-1 xii. (Calcium compounds - Annex-E)	-
5.3 Table-1 xiii. (Manganese Content - Annex-F)	-
5.3 Table-1 xiv. (Loss on ignition - Annex-G)	-
5.4 (Lead Free Material - 25 of IS 33)	-
5.3 Table-1 xiv. (Loss on ignition - Annex-G)	-

-
Test facility is not availalble for acidity and alkalinity and matter soluble in water test. approved sample and declaration is required for colour, oil absorption test, residue on sieve test.; EXCLUDING Residue on sieve, oil absorption. Colour- staining power and undertone, acidity and alkalinity, Matter soluble in water;

13227

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 16169 (2014)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures

300000 View breakup
Rs.3,00,000/- (10% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7, (Elec)(Documentation)	-	30000	10% Discount for BIS
6 to 6.2, (Elec)(Test for single or multi-phase inverter to Pass/fail criteria)	-	300000	10% Discount for BIS
6, (Elec)(Test for single or multi-phase inverter)	-	300000	10% Discount for BIS
Annex B, (Elec)(Test for independent islanding device)	-	300000	300000
Annex A, (Elec)(Islanding as it applies to PV systems)	-	10000	300000

05 Apr, 2027

-
Upto 20 kVA

13228

BIS, Central Laboratory (CL)

None

IS 1664 (2002)

Mineral mixtures for supplementing cattle feeds - Specification (Fourth Revision)

Rs11600- Type 1 ; Rs 11600/- for type 2 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(Cl. 5) (Description )	-
(Cl. 6.1) (Seiving through 212 micron IS Sieve),)	-
table 1, (Cl. 6.3) (Moisture)	-
(Cl. 5) (Description )	-
table 1, (Cl. 6.3) (Presence of protenious/organic impurities)	-
table 1, (Cl. 6.3) (Total ash in moisture free sample)	-
table 1, (Cl. 6.3) (Arsenic(as As2O3),.)	-
table 1, (Cl. 6.3) (Lead(as Pb), .)	-
table 1, (Cl. 6.3) (Acid insoluble ash (on dry basis))	-
table 1, (Cl. 6.3) (Sulphur (on dry basis))	-
table 1, (Cl. 6.3) (Zinc (on dry basis))	-
table 1, (Cl. 6.3) (Cobalt (on dry basis))	-
table 1, (Cl. 6.3) (Mangnanese (on dry basis))	-
table 1, (Cl. 6.3) (Copper (on dry basis))	-
table 1, (Cl. 6.3) (Iodine (as KI ) on dry basis,)	-
table 1, (Cl. 6.3) (Iron (on dry basis))	-
table 1, (Cl. 6.3) (Magnesium( on dry basis))	-

-
500 gm x 3 EXCLUDING "Iron,Iodine,Copper,Manganese,Cobalt,Zinc, Sulphur B. anthracis, Clostridium; "

13229

BIS, Western Regional Laboratory (WRL)

None

IS 1 (1968)

Specification for the national flag of India (Cotton khadi) (second revision)

Rs. 10890/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (FLAG)	-
4.3 a IS 1803 (Asoka Chakra)	-
4.3 b IS 1804 (Asoka Chakra)	-
4.3.1 Table 6 Fig. 4. (J)	-
4.3.1 Table 6 Fig. 4. (K)	-
4.3.1 Table 6 Fig. 4. (L)	-
4.3.1 Table 6 Fig. 4. (N)	-
3.5,3.5.1 (Wooden Toggles)	-
4,4.1 Table 5 Fig. 2 & 3 (A)	-
4,4.1 Table 5 Fig. 2 & 3 (B)	-
4,4.1 Table 5 Fig. 2 & 3 (C)	-
4,4.1 Table 5 Fig. 2 & 3 (D)	-
4,4.1 Table 5 Fig. 2 & 3 (E)	-
4,4.1 Table 5 Fig. 2 & 3 ( Dimension of Hemp Cordage and Loop L)	-
4,4.1 Table 5 Fig. 2 & 3 (M)	-
4,4.1 Table 5 Fig. 2 & 3 (N)	-
3.5.2 Table 5 Fig.1 (Wooden Toggle P)	-
5,5.1 a (Constructions)	-
5,5.1 b (The number of stitches shall not be less than 4 per cm)	-
5.2 (Depth of Lapped seam 10 mm ± 2 mm)	-
5.3 (Reinforcements -)	-
5.4 ( Sleeve)	-
5.5 (Hemp cordage)	-
5.5.1 (Brass wire- Flag of Size No 7 shall be provided with a Brass wire of 2.65 mm diameter.)	-
5.6 (Toggle)	-

-
-

13230

BIS, Central Laboratory (CL)

None

IS 9973 (1981)

Specification for visor for scooter helmets

Rs.6900/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Impact resistance)	-
5.2 (Penetration resistance)	-
5.3 (Flammability)	-
5.4.2 (Spherical&Cylindral error)	-
5.5 (Field of Vision)	-
7.0 (Mass)	-
5.4.1 (Distortion)	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number