| 13231 |
DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP), Azadpur
| 8131406
| IS 4990 (2011) |
Plywood for concrete shuttering works - Specification (Third Revision) |
- |
14750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.2(DIMENSIONS &
TOLERANCES
) |
- |
500 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 7.2(DIMENSIONS &
TOLERANCES
) |
- |
500 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 7.3(DIMENSIONS &
TOLERANCES
) |
- |
500 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 7.4(DIMENSIONS &
TOLERANCES
) |
- |
500 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 8.1(WORKMANSHIP AND FINISH ) |
- |
250 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 8.3(WORKMANSHIP AND FINISH ) |
- |
250 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 10.1.1(MOISTURE CONTENT) |
- |
500 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 10.1.2, 10.1.2.1 (Table-1)(GLUE ADHESION IN DRY STATE) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 10.1.2, 10.1.2.2(GLUE ADHESION IN DRY STATE) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 10.1.3, 10.1.3.1.2(RESISTANCE TO WATER TEST) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 10.1.3, 10.1.3.1.1 (Table-1)(RESISTANCE TO WATER TEST) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 10.1.4(RESISTANCE TO WATER TEST) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 10.1.5, 10.1.5.1 (Table-1)(MYCOLOGICAL TEST ) |
- |
3000 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 10.1.5.2(Chem)(MYCOLOGICAL TEST ) |
- |
500 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 10.1.6(TENSILE STRENGTH) |
- |
750 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 10.1.7 (Table-2)(STATIC BENDING STRENGTH) |
- |
1500 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 10.1.8 (Table-3)(WET BENDING STRENGTH) |
- |
1500 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
| 10.1.9(RETENTION OF PRESERVATIVE) |
- |
1000 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14,750/- |
|
17 Jun, 2027 |
-
- |
| 13232 |
DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP), Azadpur
| 8131406
| IS 11884 (1986) |
Specification for fire - Resistant brattice sheeting made from unsupported plastics |
- |
8250 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2(Thickness) |
- |
250 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8250.00 |
| 3.3(Width) |
- |
250 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8250.00 |
| 3.5.1(Breaking Load and elongation at Break) |
- |
1500 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8250.00 |
| 3.5.1(Elongation at Break) |
- |
500 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8250.00 |
| 3.5.2(Tear strength) |
- |
1000 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8250.00 |
| 3.5.3(Fire Resistance) |
- |
2000 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8250.00 |
| 3.5.4(Electrical Resistance Test) |
- |
3000 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.8250.00 |
|
17 Jun, 2027 |
-
- |
| 13233 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 12615 (2018) |
Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification" (Third Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 15.2 (Rating) |
- |
|
|
|
| 18.3 (BIS Certification Marking
) |
- |
|
|
|
| 8.0 (Earthing) |
- |
|
|
|
| 9.0 (Terminal Marking) |
- |
|
|
|
| 11.0 (DUTY AND RATING) |
- |
|
|
|
| 18.3 (Marking) |
- |
|
|
|
| 16.2.1 (Dimensions) |
- |
|
|
|
| 16.1.1 (Insulation Resistance Test) |
- |
|
|
|
| 16.1.2 (Measurement of Resistance of Windings of Stator) |
- |
|
|
|
| 16.1.3 (No Load Test) |
- |
|
|
|
| 16.1.4 (Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage) |
- |
|
|
|
| 16.1.5 (5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only)) |
- |
|
|
|
| 16.1.6 (High Voltage Test) |
- |
|
|
|
| 16.2.2 (Locked Rotor Test) |
- |
|
|
|
| 16.2.2.3 (Determination of starting characteristics
-locked rotor current) |
- |
|
|
|
| 16.2.2.3.1 (Direct proportion method) |
- |
|
|
|
| 16.2.3 (Full Load Test to Determine Efficiency, Power Factor and Slip) |
- |
|
|
|
| 16.2.4 (Temperature Rise Test) |
- |
|
|
|
| 16.2.5 (Momentary Overload Test) |
- |
|
|
|
|
- |
-
Excluding For rating above 30 kW and optional test for all rating |
| 13234 |
BIS, Central Laboratory (CL)
| None
| IS 4159 (2021) |
Mineral Filled Sheathed Heating Elements |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| "Cl. 6 IS 4159:2021" (Classification) |
- |
|
|
|
| "Cl. 8 IS 4159:2021" (Protection against access to live parts) |
- |
|
|
|
| "Cl. 9 IS 4159:2021" (Starting of motor operated appliances) |
- |
|
|
|
| "Cl. 11 IS 4159:2021" (Heating) |
- |
|
|
|
| "Cl. 13 IS 4159:2021" (Leakage Current & Electrical Strength at Operating Temperature) |
- |
|
|
|
| "Cl. 15 IS 4159:2021" (Moisture Resistance) |
- |
|
|
|
| "Cl. 16 IS 4159:2021" (Leakage Current and Electric strength) |
- |
|
|
|
| "Cl. 14 IS 4159:2021" (Transient Over Voltage) |
- |
|
|
|
| "Cl. 17 IS 4159:2021" (Overload protection of transformers and associated circuits.) |
- |
|
|
|
| "Cl. 18 IS 4159:2021" (Endurance) |
- |
|
|
|
| "Cl. 19 IS 4159:2021" (Abnormal Operation) |
- |
|
|
|
| "Cl. 20 IS 4159:2021" (Stability and mechanical Hazards) |
- |
|
|
|
| "Cl. 21 IS 4159:2021" (Mechanical Strength) |
- |
|
|
|
| "Cl. 22 IS 4159:2021" (Construction) |
- |
|
|
|
| "Cl. 23 IS 4159:2021" (Internal Wiring) |
- |
|
|
|
| "Cl. 24 IS 4159:2021" (Components) |
- |
|
|
|
| "Cl. 25 IS 4159:2021" (Supply Connections and External Flexible Cables and Cords) |
- |
|
|
|
| "Cl. 26 IS 4159:2021" (Terminal For External Conductors) |
- |
|
|
|
| "Cl. 27 IS 4159:2021" (Provision For Earthing) |
- |
|
|
|
| "Cl. 30 IS 4159:2021" (Resistance To Heat, Fire And Tracking) |
- |
|
|
|
| "Cl. 31 IS 4159:2021" (Resistance To Rusting) |
- |
|
|
|
| "Cl. 102 IS 4159:2021" (Leakage and hydrostatic strength (for oil heating elements)) |
- |
|
|
|
|
- |
-
Complete except oil heating element |
| 13235 |
UL India Private limited, Gurgaon
| 8127226
| IS 16333 : Part 3 (2022) |
Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision) |
- |
31350 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(Inputting of text) |
- |
15000 |
|
NA |
| 5.2(Message Readability) |
- |
15000 |
|
NA |
| 6(Marking) |
- |
1350 |
|
NA |
| 5.1(Inputting of text) |
- |
- |
|
- |
| 5.2(Message Readability) |
- |
- |
|
- |
| 6(Marking) |
- |
- |
|
- |
|
07 Aug, 2028 |
-
- |
| 13236 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 302 : Part 2 : Sec 3 (2007) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision) |
- |
Rs.8330/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 (Classification- IS 302-1 ) |
- |
|
|
|
| 6 (Classification- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.1 (Marking- IS 302-1) |
- |
|
|
|
| 7.3 (Marking- IS 302-1) |
- |
|
|
|
| 7.4 (Marking- IS 302-1) |
- |
|
|
|
| 7.6 (Marking- IS 302-1) |
- |
|
|
|
| 7.7 (Marking- IS 302-1) |
- |
|
|
|
| 7.8 (Marking- IS 302-1) |
- |
|
|
|
| 7.11 (Marking- IS 302-1) |
- |
|
|
|
| 7.12 (Marking- IS 302-1) |
- |
|
|
|
| 7.13 (Marking- IS 302-1) |
- |
|
|
|
| 7.14 (Marking- IS 302-1) |
- |
|
|
|
| 7.15 (Marking- IS 302-1) |
- |
|
|
|
| 7.101 (Marking) |
- |
|
|
|
| 8 ( Protection Against Electric Shock, IS 302-1) |
- |
|
|
|
| 10 (Power Input and Current, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 11 (Heating, IS 302-1) |
- |
|
|
|
| 13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1) |
- |
|
|
|
| 13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1) |
- |
|
|
|
| 14 (Transient Over Voltages, IS 302-1) |
- |
|
|
|
| 15.1 (Moisture Resistance, IS 302-1) |
- |
|
|
|
| 15.2 (Moisture Resistance, IS 302-1) |
- |
|
|
|
| 15.3 (Moisture Resistance, IS 302-1) |
- |
|
|
|
| 16 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1) |
- |
|
|
|
| 16 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1) |
- |
|
|
|
| 19.4 (Abnormal Operation, IS 302-1) |
- |
|
|
|
| 19.4 (Abnormal Operation, IS 302-1) |
- |
|
|
|
| 19.7 (Abnormal Operation) |
- |
|
|
|
| 19.9 (Abnormal Operation) |
- |
|
|
|
| 19.1 (Abnormal Operation) |
- |
|
|
|
| 19.101 (Abnormal Operation) |
- |
|
|
|
| 20.1 (Stability & Mechanical Hazards, IS 302-1) |
- |
|
|
|
| 20.2 (Stability & Mechanical Hazards, IS 302-1) |
- |
|
|
|
| 21.1 (Mechanical Strength, IS 302-1) |
- |
|
|
|
| 21.2 (Mechanical Strength, IS 302-1) |
- |
|
|
|
| 21.101 (Mechanical Strength, IS 302-2-3) |
- |
|
|
|
| 22.101 (Construction) |
- |
|
|
|
| 22 (Construction, IS 302-1) |
- |
|
|
|
| 22.102 (Construction) |
- |
|
|
|
| 22.103 (Construction) |
- |
|
|
|
| 22.104 (Construction) |
- |
|
|
|
| 22.105 (Construction) |
- |
|
|
|
| 22.106 (Construction) |
- |
|
|
|
| 22.107 (Construction) |
- |
|
|
|
| 23.1 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.2 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.3 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.4 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.5 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.6 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.7 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.8 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.9 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 23.10 (Internal Wiring, IS 302-1) |
- |
|
|
|
| 24.1 (Components, IS 302-1) |
- |
|
|
|
| 24.2 (Components, IS 302-1) |
- |
|
|
|
| 24.4 (Components, IS 302-1) |
- |
|
|
|
| 24.5 (Components, IS 302-1) |
- |
|
|
|
| 24.6 (Components, IS 302-1) |
- |
|
|
|
| 25.1 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.5 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.6 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.7 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.8 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 26.9 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.1 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.11 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.12 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.13 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.14 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.14 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.15 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.16 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.17 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.18 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.19 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.2 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.21 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 25.22 (Supply Connection and External Flexible Cords, IS 302-1) |
- |
|
|
|
| 26 (Terminals for External Conductors, IS 302-1) |
- |
|
|
|
| 27.1 (Provision for Earthing, IS 302-1) |
- |
|
|
|
| 27.2 (Provision for Earthing, IS 302-1) |
- |
|
|
|
| 27.3 (Provision for Earthing, IS 302-1) |
- |
|
|
|
| 27.4 (Provision for Earthing, IS 302-1) |
- |
|
|
|
| 27.5 (Provision for Earthing, IS 302-1) |
- |
|
|
|
| 28 (Screws & Connections, IS 302-1) |
- |
|
|
|
| 29.1 (Clearances, Creepage distances and Solid Insulation, IS 302-1) |
- |
|
|
|
| 29.2 (Clearances, Creepage distances and Solid Insulation, IS 302-1) |
- |
|
|
|
| 30.1 (Resistance to Heat, Fire & Tracking, IS 302-1) |
- |
|
|
|
| 30.2 (Resistance to Heat, Fire & Tracking, IS 302-1) |
- |
|
|
|
| 31 (Resistance of Rusting, IS 302-1) |
- |
|
|
|
| 32 (Radiation, Toxicity and similar Hazard IS 302-1) |
- |
|
|
|
|
- |
-
The following test facilities for clauses are not available:
1. Cl 24.1.2 TF for switch endurance of steam iron
2. Clause 24 Components |
| 13237 |
Ace Test Labs & Metrology Pvt. Ltd., Sonipat
| 9162826
| IS 16333 : Part 3 (2022) |
Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision) |
- |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(Inputting of text) |
- |
7000 |
|
10% Discount for BIS |
| 5.2(Message Readability) |
- |
7000 |
|
10% Discount for BIS |
| 6(Marking) |
- |
1000 |
|
10% Discount for BIS |
|
14 Nov, 2027 |
-
- |
| 13238 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 4296 : Part 2 (2015) |
Tools for pressing: Part 2 punches with cylindrical head and straight or reduced shank (First Revision) |
For all types |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Dimensions & Tolerance) |
- |
|
|
|
| 5.2 (Hardness (HRC)) |
- |
|
|
|
| 4 (Surface Roughness) |
- |
|
|
|
| 5 (Material Testing) |
- |
|
|
|
|
- |
-
Complete |
| 13239 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 13983 (1994) |
Stainless Steel Sinks For Domestic Purposes |
- |
Rs.14635/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Type) |
- |
|
|
|
| 6 (Thickness of sheet/strip) |
- |
|
|
|
| 6 (Depth of bowl) |
- |
|
|
|
| 6 (Internal dimensions of the bowl) |
- |
|
|
|
| 6 (Bowl locating limits) |
- |
|
|
|
| 6 (Co-ordinating sizes) |
- |
|
|
|
| 7.1 (Consruction and workmanship) |
- |
|
|
|
| 7.1.1 (Consruction and workmanship) |
- |
|
|
|
| 7.2 (Consruction and workmanship) |
- |
|
|
|
| 7.3 (Drainers) |
- |
|
|
|
| 7.4 (Waste outlet) |
- |
|
|
|
| 7.5 (Tap holes) |
- |
|
|
|
| 7.6 (Overflows) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Carbon Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Silicon Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Manganese Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Phouphorous Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Sulphur Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Nickel Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Chromium Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Nitrogen Content) |
- |
|
|
|
|
- |
-
Excluding C(<0.05%), Mo(>1.5%) |
| 13240 |
LABORATORY, TEXTILES COMMITTEE, MUMBAI
| 7149904
| IS 15852 (2009) |
Textiles – Polyester blended woven shirting for uniforms |
- |
16050 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1, Table 1,i)(
i) Nominal count of warp and
weft yarns (For guidance only)
) |
- |
200 |
|
Excluding GST |
| 4.1, Table 1,ii)(Length,m) |
- |
150 |
|
Excluding GST
for both length & width |
| 4.1, Table 1,iii)(Overall widthc m) |
- |
150 |
|
Excluding GST
for both length & width |
| 4.1, Table 1,iv)(iv) Threads/dm: IS 1963
a) Warp
b) Weft
) |
- |
200 |
|
Excluding GST |
| 4.1, Table 1,v)(v) Mass, g/m2) |
- |
200 |
|
Excluding GST |
| 4.1, Table 1,vi)(vi) Fibres composition, percent :
a) Polyester
b) Viscose/cotton
) |
- |
550 |
|
Excluding GST |
| 4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min:
a) Warpway
b) Weftway
) |
- |
550 |
|
Excluding GST |
| 4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min:
a) Wrap way
b) Weft way
) |
- |
400 |
|
Excluding GST |
| 4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max:
a) Warp way
b) Weft way
) |
- |
800 |
|
Excluding GST |
| 4.1, Table 1,x)(x) Soil release efficiency, Min:
a) Initial (Finished)
a) After 50 washes
) |
- |
7100 |
|
Excluding GST
After 30 wash cycles |
| 4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after
three repeated washes)
) |
- |
1800 |
|
Excluding GST |
| 4.1, Table 1,xii)(xii) Pilling resistance, Min
(After 5 h of test)
) |
- |
500 |
|
Excluding GST |
| 4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max:
a) Warpway
b) Weftway
) |
- |
300 |
|
Excluding GST |
| 4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method)) |
- |
500 |
|
Excluding GST |
| 4.1, Table 1,xvii)(pH value of aqueous extract) |
- |
300 |
|
Excluding GST |
| 4.1 Table 1-(xvii)(a) Light (change in colour )) |
- |
1500 |
|
Excluding GST |
| Cl. 4.1(table 1- xvii)(b) Washing: Test 2:
I) Change in colour
2) Staining of adjacent fabrics) |
- |
250 |
|
Excluding GST |
| 4.1(table 1- xvii)(Dry-heat (change in colour)) |
- |
500 |
|
Excluding GST |
| 4.1(table 1- xvii)(Perspiration (acidic and alkaline ):
I) Change in colour
2) Staining of adjacent fabric) |
- |
500 |
|
Excluding GST |
| 4.1(table 1- xvii)(Rubbing:
I) Dry
2) Wet) |
- |
250 |
|
Excluding GST |
| 4.1(table 1- xvii)(Hot pressing:
I) Change in colour
2) Staining of adjacent fabrics) |
- |
500 |
|
Excluding GST |
|
- |
-
- |
| 13241 |
DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP), Azadpur
| 8131406
| IS 17425 (2020) |
Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification |
- |
42000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Copper Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Copper Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Copper Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Copper Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Copper Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Copper Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Copper Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Copper Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Magnesium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Magnesium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Magnesium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Magnesium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Magnesium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Magnesium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Magnesium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Magnesium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Silicon Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Silicon Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Silicon Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Silicon Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Silicon Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Silicon Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Silicon Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Silicon Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Si-Killed(Silicon Content) |
- |
400 |
|
NA |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Silicon Content) |
- |
400 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Iron Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Iron Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Iron Content) |
- |
550 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Iron Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Iron Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Iron Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Iron Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Iron Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Manganese Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Manganese Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Manganese Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Manganese Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Manganese Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Manganese Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Manganese Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Manganese Content) |
- |
400 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Zinc Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Zinc Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Zinc Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Zinc Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Zinc Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Zinc Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Zinc Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Titanium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Titanium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Titanium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Titanium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Titanium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Titanium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Titanium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Titanium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Chromium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Chromium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Chromium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Chromium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Chromium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Chromium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Chromium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Aluminium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Aluminium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Aluminium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Aluminium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Aluminium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Aluminium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Aluminium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Aluminium Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Killed(Aluminium Content) |
- |
400 |
|
NA |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Aluminium Content) |
- |
400 |
|
NA |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Nickel Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Lead Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Tin Content) |
- |
550 |
|
NA |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Carbon Content) |
- |
400 |
|
NA |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Sulphur Content) |
- |
400 |
|
NA |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Phosphorous Content) |
- |
400 |
|
NA |
| 5(Dimensions of pipe - i) Outside diameter) |
- |
250 |
|
NA |
| 5(Dimensions of pipe - ii) Wall thickness minimum) |
- |
250 |
|
NA |
| 5.1.2(Ovality) |
- |
250 |
|
NA |
| 6(Visual Appearance) |
- |
250 |
|
NA |
| 7.1(Hydraulic Characteristics - Quality test) |
- |
2500 |
|
NA |
| 7.1(Hydraulic Characteristics - Acceptance test) |
- |
2000 |
|
NA |
| 7.2(Reversion Test) |
- |
800 |
|
NA |
| 7.3(Tensile Test- i) Tensile Strength) |
- |
500 |
|
NA |
| 7.3(Tensile Test - ii)Elongation at Break) |
- |
500 |
|
NA |
| 7.4(Fusion Compatibility Test- a) Quality test) |
- |
2500 |
|
NA |
| 7.4(Fusion Compatibility Test- b) Acceptance test) |
- |
2000 |
|
NA |
| 7.5(Density) |
- |
1000 |
|
NA |
| 7.6(Melt Flow Rate) |
- |
1100 |
|
NA |
| 4.2(Carbon black- a)carbon content) |
- |
500 |
|
NA |
| 4.2(Carbon black- b) Dispersion of carbon black) |
- |
500 |
|
NA |
| 3(CLASSIFICATION OF PIPES) |
- |
500 |
|
NA |
| 4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’) |
- |
2000 |
|
NA |
| 4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.) |
- |
1000 |
|
NA |
| 4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.) |
- |
1000 |
|
NA |
| 4.1(Quick Coupled Male and Female Couplers) |
- |
1000 |
|
NA |
| 4.1.4(Holding attachments for coupler parts) |
- |
1000 |
|
NA |
| 6.1.3(Weldability Test- a) Quality test) |
- |
1000 |
|
NA |
| 6.1.3(Weldability Test- b) Acceptance test) |
- |
1000 |
|
NA |
| 3(QUICK COUPLED PIPES) |
- |
1000 |
|
NA |
| 4(QUICK COUPLED FITTINGS) |
- |
1000 |
|
NA |
| 5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.) |
- |
1000 |
|
NA |
| 6.1.1, 6.1.1.1(Leakage Test) |
- |
1000 |
|
NA |
| 6.1.2, 6.1.2.1(Hydraulic Proof Test) |
- |
1000 |
|
NA |
| 6.1.2.2(Hydraulic Proof Test) |
- |
1000 |
|
NA |
| 6.1.2.2(Hydraulic Proof Test) |
- |
1000 |
|
NA |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Copper Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Copper Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Copper Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Copper Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Copper Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Copper Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Copper Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Copper Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Magnesium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Magnesium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Magnesium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Magnesium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Magnesium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Magnesium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Magnesium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Magnesium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Silicon Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Silicon Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Silicon Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Silicon Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Silicon Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Silicon Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Silicon Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Silicon Content) |
- |
500 |
|
- |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Si-Killed(Silicon Content) |
- |
400 |
|
- |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Silicon Content) |
- |
400 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Iron Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Iron Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Iron Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Iron Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Iron Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Iron Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Iron Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Iron Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Manganese Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Manganese Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Manganese Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Manganese Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Manganese Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Manganese Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Manganese Content) |
- |
500 |
|
- |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Manganese Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Zinc Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Zinc Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Zinc Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Zinc Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Zinc Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Zinc Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Zinc Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Titanium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Titanium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Titanium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Titanium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Titanium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Titanium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Titanium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Titanium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Chromium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Chromium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Chromium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Chromium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Chromium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Chromium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Chromium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Aluminium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Aluminium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Aluminium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Aluminium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Aluminium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Aluminium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Aluminium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Aluminium Content) |
- |
500 |
|
- |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Killed(Aluminium Content) |
- |
400 |
|
- |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Aluminium Content) |
- |
400 |
|
- |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Nickel Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Lead Content) |
- |
500 |
|
- |
| C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Tin Content) |
- |
500 |
|
- |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Carbon Content) |
- |
400 |
|
- |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Sulphur Content) |
- |
400 |
|
- |
| C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Phosphorous Content) |
- |
400 |
|
- |
| 5(Dimensions of pipe - i) Outside diameter) |
- |
250 |
|
- |
| 5(Dimensions of pipe - ii) Wall thickness minimum) |
- |
250 |
|
- |
| 5.1.2(Ovality) |
- |
250 |
|
- |
| 6(Visual Appearance) |
- |
250 |
|
- |
| 7.1(Hydraulic Characteristics - Quality test) |
- |
2200 |
|
- |
| 7.1(Hydraulic Characteristics - Acceptance test) |
- |
2200 |
|
- |
| 7.2(Reversion Test) |
- |
800 |
|
- |
| 7.3(Tensile Test- i) Tensile Strength) |
- |
500 |
|
- |
| 7.3(Tensile Test - ii)Elongation at Break) |
- |
500 |
|
- |
| 7.4(Fusion Compatibility Test- a) Quality test) |
- |
2200 |
|
- |
| 7.4(Fusion Compatibility Test- b) Acceptance test) |
- |
2200 |
|
- |
| 7.5(Density) |
- |
1000 |
|
- |
| 7.6(Melt Flow Rate) |
- |
1100 |
|
- |
| 4.2(Carbon black- a)carbon content) |
- |
250 |
|
- |
| 4.2(Carbon black- b) Dispersion of carbon black) |
- |
250 |
|
- |
| 3(CLASSIFICATION OF PIPES) |
- |
250 |
|
- |
| 4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’) |
- |
2000 |
|
- |
| 4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.) |
- |
1000 |
|
- |
| 4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.) |
- |
2000 |
|
- |
| 4.1(Quick Coupled Male and Female Couplers) |
- |
1000 |
|
- |
| 4.1.4(Holding attachments for coupler parts) |
- |
1000 |
|
- |
| 6.1.3(Weldability Test- a) Quality test) |
- |
1000 |
|
- |
| 6.1.3(Weldability Test- b) Acceptance test) |
- |
1000 |
|
- |
| 3(QUICK COUPLED PIPES) |
- |
500 |
|
- |
| 4(QUICK COUPLED FITTINGS) |
- |
1000 |
|
- |
| 5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.) |
- |
2000 |
|
- |
| 6.1.1, 6.1.1.1(Leakage Test) |
- |
1000 |
|
- |
| 6.1.2, 6.1.2.1(Hydraulic Proof Test) |
- |
1000 |
|
- |
| 6.1.2.2(Hydraulic Proof Test) |
- |
1000 |
|
- |
| 6.1.2.2(Hydraulic Proof Test) |
- |
1000 |
|
- |
|
17 Jun, 2027 |
-
Included w.e.f. 24-08-2022 |
| 13242 |
LABORATORY, TEXTILES COMMITTEE, MUMBAI
| 7149904
| IS 15853 (2009) |
Textiles – Polyester blended woven suiting for uniforms |
- |
15300 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1, Table 1,i)(
i) Nominal count of warp and
weft yarns (For guidance only)
) |
- |
200 |
|
Excluding GST |
| 4.1, Table 1,ii)(Length,m) |
- |
150 |
|
Excluding GST
Test charges are for Length & Width together. |
| 4.1, Table 1,iii)(Overall widthc m) |
- |
150 |
|
Excluding GST
Test charges are for Length & Width together. |
| 4.1, Table 1,iv)(iv) Threads/dm: IS 1963
a) Warp
b) Weft
) |
- |
200 |
|
Excluding GST |
| 4.1, Table 1,v)(v) Mass, g/m2) |
- |
200 |
|
Excluding GST |
| 4.1, Table 1,vi)(vi) Fibres composition, percent :
a) Polyester
b) Viscose/cotton
) |
- |
550 |
|
Excluding GST |
| 4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min:
a) Warpway
b) Weftway
) |
- |
550 |
|
Excluding GST |
| 4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min:
a) Wrap way
b) Weft way
) |
- |
400 |
|
Excluding GST |
| 4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max:
a) Warp way
b) Weft way
) |
- |
800 |
|
Excluding GST |
| 4.1, Table 1,x)(x) Soil release efficiency, Min:
a) Initial (Finished)
a) After 50 washes
) |
- |
7100 |
|
Excluding GST
After 30 washes (As per amendment) |
| 4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after
three repeated washes)
) |
- |
1800 |
|
Excluding GST |
| 4.1, Table 1,xii)(xii) Pilling resistance, Min
(After 5 h of test)
) |
- |
500 |
|
Excluding GST |
| 4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max:
a) Warpway
b) Weftway
) |
- |
300 |
|
Excluding GST |
| 4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method)) |
- |
500 |
|
Excluding GST |
| 4.1, Table 1,xv)(xv) pH value of aqueous extract
(Hot method)
) |
- |
300 |
|
Excluding GST |
| 4.1, Table 1,xvi)(Colour fastness) |
- |
1500 |
|
Excluding GST
(for end point- upto 5 blue wool standard) |
| 4.1, Table 1,xvi)(Colour fastness) |
- |
250 |
|
Excluding GST |
| 4.1, Table 1,xvi)(Colour fastness) |
- |
550 |
|
Excluding GST |
|
- |
-
- |
| 13243 |
Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)
| 8134206
| IS 3521 : Part 2 (2021) |
Personal Fall Arrest Systems Specification Part 2 Lanyards and Energy Absorbers |
- |
25000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.5(Adjustment Slippage) |
- |
1000 |
|
- |
| 4.2.6(Static strength) |
- |
3000 |
|
- |
| 4.2.7(Dynamic strength for adjustable lanyards) |
- |
5000 |
|
- |
| 4.3.5(Dynamic performance) |
- |
2000 |
|
- |
| 5.2.4(Corrosion resistance) |
- |
5000 |
|
- |
| 4.2.5(Adjustment Slippage) |
- |
0 |
|
- |
| 4.2.6(Static strength) |
- |
0 |
|
- |
| 4.2.7(Dynamic strength for adjustable lanyards) |
- |
0 |
|
- |
| 4.3.5(Dynamic performance) |
- |
0 |
|
- |
| 5.2.4(Corrosion resistance) |
- |
0 |
|
- |
| 4.3.4(Inadvertent operation) |
- |
1500 |
|
- |
| 4.2.5(Adjustment Slippage) |
- |
0 |
|
- |
| 4.2.6(Static strength) |
- |
0 |
|
- |
| 4.2.7(Dynamic strength for adjustable lanyards) |
- |
0 |
|
- |
| 4.3.5(Dynamic performance) |
- |
0 |
|
- |
| 5.2.4(Corrosion resistance) |
- |
0 |
|
- |
| 4.3.4(Inadvertent operation) |
- |
0 |
|
- |
| 4.3.3(Energy-absorbing lanyards and FBH with energy absorber) |
- |
0 |
|
- |
| 4.3.6(Static strength) |
- |
500 |
|
- |
| 4.3.7(Dynamic performance after conditioning) |
- |
4000 |
|
- |
| 4.2.3(Terminations) |
- |
1000 |
|
- |
| 4.2.2(Chains) |
- |
1000 |
|
- |
| 4.2.1(Fibre ropes and webbing) |
- |
1000 |
|
- |
|
21 Jul, 2028 |
-
Included w.e.f.
07.11.2022. |
| 13244 |
Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)
| 8134206
| IS 3521 : Part 1 (2021) |
Personal Fall Arrest Systems Specification Part 1 Full Body Harness Fourth Revision |
- |
31600 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.3.2.1(Breaking strength of Synthetic fibre) |
- |
0 |
|
- |
| 4.3.2.1(Breaking strength of webbing) |
- |
1200 |
|
- |
| 4.3.2.2(Width of the webbing) |
- |
200 |
|
- |
| 4.3.2.3(No of stitches per cm) |
- |
200 |
|
- |
| 4.3.2.4(Flammability) |
- |
5000 |
|
- |
| 4.4(Thickness of metal plating) |
- |
1000 |
|
- |
| 4.4(Corrosion resistance) |
- |
5000 |
|
- |
| 4.5(Buckle Uncoupling and Slippage) |
- |
1000 |
|
- |
| 4.6(Static Strength) |
- |
3000 |
|
- |
| 4.7(Dynamic Performance) |
- |
5000 |
|
- |
| 4.9(Static Suspension Angle Test for Class AE FBH) |
- |
2000 |
|
- |
| 4.3.2.1(Breaking strength of Synthetic fibre) |
- |
0 |
|
- |
| 4.3.2.1(Breaking strength of webbing) |
- |
0 |
|
- |
| 4.3.2.2(Width of the webbing) |
- |
0 |
|
- |
| 4.3.2.3(No of stitches per cm) |
- |
0 |
|
- |
| 4.3.2.4(Flammability) |
- |
0 |
|
- |
| 4.4(Thickness of metal plating) |
- |
0 |
|
- |
| 4.4(Corrosion resistance) |
- |
0 |
|
- |
| 4.5(Buckle Uncoupling and Slippage) |
- |
0 |
|
- |
| 4.6(Static Strength) |
- |
0 |
|
- |
| 4.7(Dynamic Performance) |
- |
0 |
|
- |
| 4.9(Static Suspension Angle Test for Class AE FBH) |
- |
0 |
|
- |
| 4.8(Static Suspension Test) |
- |
2000 |
|
- |
| 5.2(Corrosion Test) |
- |
0 |
|
- |
| 5.3(Buckle Shake Test) |
- |
0 |
|
- |
| 5.4(Static Strength Test for Fall-arrest Attachment
Elements) |
- |
0 |
|
- |
| 5.5(Static Strength Test for Controlled-descent
Attachment Elements) |
- |
3000 |
|
- |
| 5.6(Static Strength Test for Confined-space Access
Attachment Elements) |
- |
3000 |
|
- |
| 5.7(Dynamic Performance Tests) |
- |
0 |
|
- |
| 5.8(Static Suspension Test for Fall-arrest Attachment
Elements) |
- |
0 |
|
- |
| 5.9(Static suspension Angle Test for Class AE FBH) |
- |
0 |
|
- |
| 5.10(Flammability Resistance Test) |
- |
0 |
|
- |
|
21 Jul, 2028 |
-
Included w.e.f.
07.11.2022. |
| 13245 |
UL India Private limited, Gurgaon
| 8127226
| IS 302 : Part 2 : Sec 6 (2009) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision) |
- |
19635 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.0(Marking and instructions) |
- |
500 |
|
NA |
| 8.0(Protection against access to live part test) |
- |
500 |
|
NA |
| 10.0(Power Input and current test) |
- |
1135 |
|
NA |
| 11.0(Heating test) |
- |
500 |
|
NA |
| 13.0(Leakage current and electric strength test) |
- |
500 |
|
NA |
| 14.0(Transient voltages) |
- |
500 |
|
NA |
| 15.0(Moisture Resistance) |
- |
500 |
|
NA |
| 16.0(Leakage current and electric strength test) |
- |
500 |
|
NA |
| 17.0(Overload protection of transformers test) |
- |
500 |
|
NA |
| 18.0(Endurance test) |
- |
500 |
|
NA |
| 19.0(Abnormal Operations) |
- |
500 |
|
NA |
| 20.0(Stability and Mechanical Hazards) |
- |
300 |
|
NA |
| 21.0(Mechanical Strength) |
- |
200 |
|
NA |
| 22.0(Construction verification related tests) |
- |
500 |
|
NA |
| 23.0(Internal wiring) |
- |
500 |
|
NA |
| 25.0(Supply connections and External Flexible Cords) |
- |
500 |
|
NA |
| 26.0(Terminal for External Conductors) |
- |
500 |
|
NA |
| 27.0(Provision for Earthing) |
- |
500 |
|
NA |
| 28.0(Screws and connections) |
- |
500 |
|
NA |
| 29.0(Clearances and Creepage distances and solid insulation) |
- |
500 |
|
NA |
| 30.0(Resistance to heat and fire) |
- |
500 |
|
NA |
|
07 Aug, 2028 |
-
Exclusions: EMI/EMC (Electrostatic, Discharges, Radiant fields, Fast transient bursts, Voltage surges, Injected current, Voltage dips & Interruptions, Mains signals) (Cl.19.11.4.1 to Cl.19.11.4.1), Component (Cl.24) |
| 13246 |
UL India Private limited, Gurgaon
| 8127226
| IS/IEC 60335 : Part 2 : Sec 89 (2010) |
Household and similar electrical appliances - Safety: Part 2 - 89: particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor |
- |
148000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1 , 7.12, 7.14,7.15(Marking) |
- |
500 |
|
- |
| 31(Resistance to rusting) |
- |
1000 |
|
- |
| 30.1(Resistance to heat and fire) |
- |
5000 |
|
- |
| 29 and table (creepage and Clearances distances ) |
- |
5000 |
|
- |
| 28.1, Table No.-14(Screws and connections) |
- |
1250 |
|
- |
| 28.2 to 28.4(Screws and connections) |
- |
1250 |
|
- |
| 27, 27.1 to 27.6(Provision for earthing) |
- |
1500 |
|
- |
| 26, 26.1 to 26.11(Terminals for external conductors) |
- |
1500 |
|
- |
| 25.1(Supply connection and external flexible cords) |
- |
1000 |
|
- |
| 24(Components) |
- |
0 |
|
- |
| 23.1 & 23.2(Internal wiring) |
- |
400 |
|
- |
| 23.3(Internal wiring) |
- |
400 |
|
- |
| 23.4(Internal wiring) |
- |
400 |
|
- |
| 23.5 to 23.8(Internal wiring) |
- |
400 |
|
- |
| 23.9 ,23.10(Internal wiring) |
- |
400 |
|
- |
| 22.1(Constructions) |
- |
300 |
|
- |
| 22.2(Constructions) |
- |
300 |
|
- |
| 22.3(Constructions) |
- |
300 |
|
- |
| 22.4(Constructions) |
- |
300 |
|
- |
| 22.5(Constructions) |
- |
300 |
|
- |
| 22.6(Constructions) |
- |
300 |
|
- |
| 22.7 to 22.10(Constructions) |
- |
300 |
|
- |
| 22.11(Constructions) |
- |
300 |
|
- |
| 22.12(Constructions) |
- |
300 |
|
- |
| 22.13 to 22.52(Constructions) |
- |
300 |
|
- |
| 22.101 to 22.102(Constructions) |
- |
300 |
|
- |
| 22.103(Constructions) |
- |
300 |
|
- |
| 22.104(Constructions) |
- |
300 |
|
- |
| 22.105 to 22.114(Constructions) |
- |
300 |
|
- |
| 21.1(MECHANICAL STRENGTH) |
- |
2400 |
|
- |
| 21.2(MECHANICAL STRENGTH) |
- |
2400 |
|
- |
| 20.2(Stability and mechanical hazards) |
- |
5000 |
|
- |
| 19(ABNORMAL OPERATION) |
- |
15000 |
|
- |
| 17(Overload protection of transformers and associated circuits) |
- |
2000 |
|
- |
| 16 & 16.1(Leakage current and electric strength) |
- |
2500 |
|
- |
| 15(Moisture resistance) |
- |
25000 |
|
- |
| 14(Transient Over Voltage & table 6) |
- |
5000 |
|
- |
| 13(ELECTRICAL INSULATION AND
LEAKAGE CURRENT AT OPERATING
TEMPERATURE) |
- |
2500 |
|
- |
| 11(TEMPERATURE RISE) |
- |
15000 |
|
- |
| 10.1(Power input and current) |
- |
15000 |
|
- |
| 8, 8.1(Protection against access to live parts) |
- |
2000 |
|
- |
|
07 Aug, 2028 |
-
- |
| 13247 |
UL India Private limited, Gurgaon
| 8127226
| IS 10322 : Part 5 : Sec 9 (2017) |
Luminaires: Part 5 particular requirements: Sec 9 rope lights |
- |
45000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 21.6(Marking) |
- |
500 |
|
- |
| 21.7(Construction) |
- |
5000 |
|
- |
| 21.8(Creepage Distance and Clearances) |
- |
500 |
|
- |
| 21.9(Provision for earthing) |
- |
1000 |
|
- |
| 21.10(Terminals) |
- |
1000 |
|
- |
| 21.11(External & Internal Wiring) |
- |
1000 |
|
- |
| 21.12(Protection against electric shock) |
- |
1000 |
|
- |
| 21.13(Endurance Tests and Thermal Tests) |
- |
15000 |
|
- |
| 21.14(Resistance to Dust & Moisture) |
- |
12000 |
|
- |
| 21.15(Insulation Resistance and Electric Strength) |
- |
2500 |
|
- |
| 21.16(Resistance to Heat , fire and tracking) |
- |
5000 |
|
- |
|
07 Aug, 2028 |
-
- |
| 13248 |
UL India Private limited, Gurgaon
| 8127226
| IS 10322 : PART 5 : SEC 3 (2012) |
Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision) |
- |
64125 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0(Marking) |
- |
500 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 7.0(Construction) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 8.0(Creepage Distance and Clearances) |
- |
500 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 9.0(Provision for earthing) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 10.0(Terminals) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 11.0(External & Internal Wiring) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 12.0(Protection against electric shock) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 13.0(Endurance Tests and Thermal Tests) |
- |
22625 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 14.0(Resistance to Dust & Moisture) |
- |
15000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 15.0(Insulation Resistance and Electric Strength) |
- |
5000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 16.0(Resistance to Heat , fire and tracking) |
- |
5000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 17.0(Photometric Test) |
- |
10000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
|
07 Aug, 2028 |
-
- |
| 13249 |
UL India Private limited, Gurgaon
| 8127226
| IS 7872 (2020) |
Deep Freezers - Specification ( Second Revision ) |
- |
286000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6(Safety Requirements) |
- |
118000 |
|
- |
| 5.4.3(Individual Strength - Pressure Test) |
- |
12000 |
|
- |
| 5.4.2(Individual Strength - Pressure Test) |
- |
12000 |
|
- |
| 11.7(Pressure Test) |
- |
12000 |
|
- |
| 4.8(Door and Fittings) |
- |
0 |
|
NA since this is part of construction |
| 7(Sound Pressure Level) |
- |
12000 |
|
- |
| 8(Freezer Storage Capacity) |
- |
20000 |
|
- |
| 11.1(No load Pull down Test) |
- |
25000 |
|
- |
| 11.2(Energy Consumption Test) |
- |
30000 |
|
- |
| 11.3(Temperature Rise Test) |
- |
15000 |
|
- |
| 11.4(Door Seal Test) |
- |
12000 |
|
- |
| 11.5(Mechanical Strength of Shelves and Similar Components) |
- |
12000 |
|
- |
| 11.6(Thermal Insulation Test ( External Condensation)) |
- |
30000 |
|
- |
|
07 Aug, 2028 |
-
- |
| 13250 |
UL India Private limited, Gurgaon
| 8127226
| IS 9873 : Part 7 (2017) |
Safety of toys: Part 7 requirements and test methods for finger paints |
- |
35000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Container - Containers used for finger paints shall not have a design that is likely to be mistaken by children with containers of foodstuffs or drinks) |
- |
500 |
|
INR 500 per component |
| 4.7(pH value - ISO 787-9) |
- |
1000 |
|
INR 1000 per component |
| 4.9(N-Nitrosamines - N-nitrosodiethanolamine (NDELA) - n EN 71–12:2013, 7.2.1 and Clause 8) |
- |
3000 |
|
INR 3000 per component |
| 4.6 - Table 4(Taste and smell - Finger paints shall not be sweetened, flavoured or fragranced - Cl 4.6) |
- |
1000 |
|
INR 1000 per component |
| 4.5.2 - Table 3(Impurities - Benzo (α) pyrene - Annex C) |
- |
1000 |
|
INR 1000 per component |
| 4.5.2 - Table 3(IImpurities- Hexachlorobenzene - Annex C) |
- |
1000 |
|
INR 1000 per component |
| 4.5.2 - Table 3(Impurities - Polychlorinated biphenyls - Annex C) |
- |
4000 |
|
INR 1000 per component |
| 4.8(shall only use binding agents, extenders, humectants and surfactants which are not
classified with any of the health hazards set out in in 4.1 (hazards class 3.1 to 3.10)) |
- |
500 |
|
INR 500 per component |
| 4.3 - Annex - D- Table D.1 - Ref 32(Preservatives - 2-methylisothiazol-3(2H)-one
(MIT) - EU Cosmetics Legislation) |
- |
1500 |
|
INR 1500 per component |
| 4.3 - Annex - D- Table D.1 - Ref 6(Preservatives - Biphenyl-2-ol (o-Phenylphenol), sodium o-phenylphenate, potassium o-phenylphenate, MEA o-phenylphenate (expressed as the phenol) - EU Cosmetics Legislation) |
- |
1500 |
|
INR 1500 per component |
| 4.3 - Annex - D- Table D.1 - Ref 19(Preservatives - 5-Chloro-2- (2,4- dichlorophenoxy) phenol (Triclosan) - EU Cosmetics Legislation) |
- |
2000 |
|
INR 2000 per component |
| 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
560 |
|
INR 560 per component |
| 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
560 |
|
INR 560 per component |
| 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
560 |
|
INR 560 per component |
| 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
560 |
|
INR 560 per component |
| 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
560 |
|
INR 560 per component |
| 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
560 |
|
INR 560 per component |
| 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
560 |
|
INR 560 per component |
| 4.4 (ref. Table 1 row 3 of ISO 8124-3-2010)(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and
ISO 8124-3 : 2010) |
- |
560 |
|
INR 560 per component |
| 4.5.1.1 - Table 1(Primary aromatic amines - Annex C) |
- |
1200 |
|
INR 1200 per component |
| 4.2.2 - Table 1, 2(Finger Paint shall not contain Azo colourants that by cleavage of one or more azo groups can produce the primary aromatic amines - Annex C) |
- |
1800 |
|
INR 1800 per component |
|
07 Aug, 2028 |
-
- |
| 13251 |
UL India Private limited, Gurgaon
| 8127226
| IS 9873 : Part 9 (2017) |
Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products |
- |
18000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6) |
- |
3000 |
|
3000 per component |
| 3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6) |
- |
3000 |
|
3000 per component |
|
07 Aug, 2028 |
-
- |
| 13252 |
UL India Private limited, Gurgaon
| 8127226
| IS 16333 : Part 3 (2017) |
Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision) |
- |
15750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(Inputting of text) |
- |
7875 |
|
-- |
| 5.2(Message Readability) |
- |
7875 |
|
-- |
|
07 Aug, 2028 |
-
- |
| 13253 |
UL India Private limited, Gurgaon
| 8127226
| IS 15644 (2006) |
Safety of electric toys |
ALL TYPE |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 20.0(Radiation, toxicity and similar hazards) |
- |
4500 |
|
40% discount for BIS. |
| 15644 Cl. 20(Radiation, toxicity and similar hazards) |
- |
4500 |
|
40% discount for BIS. |
| 15644 Cl. 7(Marking and instructions) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 8(Power Input) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 9(Heating and abnormal operation) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 10(Electrical strength at operating temperature) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 11.1(Moisture resistance) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 11.2(Resistant to humidity) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 12(Electric strength at room temperature) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 13(Mechanical strength) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 14.1(Construction) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 14.2(Construction) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 14.3(Construction) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 14.4(Construction) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 14.5(Construction) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 14.6(Construction) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 14.7(Construction) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 14.8(Construction) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 14.9(Construction) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 14.1(Construction) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 14.11(Construction) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 14.12(Construction) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 14.13(Construction) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 14.14(Construction) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 15.1(Protection of cords and wires) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 15.2(Protection of cords and wires) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 16(Components) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 17 Table-1(Screws and connections) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 17 Table-1(Nominal daimeter of screws made of insulating material) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 18(Clearance and creepage distance) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 19.1(Ball pressure test IEC 60695-10-2) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 19.2.1(Glow wire test IEC 60695-2-11) |
- |
5000 |
|
40% discount for BIS. |
| 15644 Cl. 19.2.2(Needle flame test) |
- |
5000 |
|
40% discount for BIS. |
| 9873 (Part-3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9) |
- |
4500 |
|
INR 4500 per components and Total Discount 40% Discount. |
| 9873 (Part-3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 ) |
- |
4500 |
|
INR 4500 per components and Total Discount 40% Discount. |
| 9873 (Part-3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 ) |
- |
4500 |
|
INR 4500 per components and Total Discount 40% Discount. |
| 9873 (Part-3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9) |
- |
4500 |
|
INR 4500 per components and Total Discount 40% Discount. |
| 9873 (Part-3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 ) |
- |
4500 |
|
INR 4500 per components and Total Discount 40% Discount. |
| 9873 (Part-3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 ) |
- |
4500 |
|
INR 4500 per components and Total Discount 40% Discount. |
| 9873 (Part-3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 ) |
- |
4500 |
|
INR 4500 per components and Total Discount 40% Discount. |
| 9873 (Part-3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 ) |
- |
4500 |
|
INR 4500 per components and Total Discount 40% Discount. |
| 9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6) |
- |
6000 |
|
INR 6000 per components and Total Discount 40% Discount. |
| 9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6) |
- |
6000 |
|
INR 6000 per components and Total Discount 40% Discount. |
| 9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6) |
- |
6000 |
|
INR 6000 per components and Total Discount 40% Discount. |
| 9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6) |
- |
6000 |
|
INR 6000 per components and Total Discount 40% Discount. |
|
07 Aug, 2028 |
-
Excluding: Cl.16 Components. Except Annex-E: Toys incorporating lasers and LED |
| 13254 |
UL India Private limited, Gurgaon
| 8127226
| IS 302 : Part 1 (2008) |
Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision) |
- |
79000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Marking and instructions) |
- |
500 |
|
- |
| 8.1.1(Protection against live parts in all positions) |
- |
1000 |
|
- |
| 10.1(Power input) |
- |
2500 |
|
- |
| 10.2(Current input) |
- |
2500 |
|
- |
| 11.3(Heating) |
- |
8000 |
|
- |
| 13.2(Leakage current at operating temperature) |
- |
1250 |
|
- |
| 13.3(Electric Strength at operating temperature) |
- |
1250 |
|
- |
| 14(Transient Over Voltages) |
- |
1000 |
|
- |
| 15.0(General) |
- |
2000 |
|
- |
| 16.0(General) |
- |
2500 |
|
- |
| 17(Over Load Protection of Transformers and associated circuits) |
- |
8000 |
|
- |
| 18(Endurance Test requirements and tests) |
- |
5000 |
|
- |
| 19(Abnormal Operation) |
- |
8000 |
|
- |
| 20(Stability test) |
- |
1000 |
|
- |
| 21(Mechanical Strength Test) |
- |
1500 |
|
- |
| 22(Construction verification related test) |
- |
2000 |
|
- |
| 23(General) |
- |
1000 |
|
- |
| 24(Components) |
- |
1000 |
|
- |
| 25(Supply connection and external flexible cords) |
- |
1500 |
|
- |
| 26(Terminals for external conductors) |
- |
1000 |
|
- |
| 27(Provision for earthing) |
- |
1000 |
|
- |
| 28(Screw test and connections) |
- |
1000 |
|
- |
| 29(clearance, creepage distances and solid insulation) |
- |
1000 |
|
- |
| 30.1(Ball pressure test) |
- |
4000 |
|
- |
| 30.2(Needle Flame Test) |
- |
3000 |
|
- |
| 30.2(Glow Wire Test) |
- |
3000 |
|
- |
| 32(Radiation Toxicity and Similar Hazards) |
- |
10000 |
|
- |
| 31(Resistance to Rusting) |
- |
1500 |
|
- |
|
07 Aug, 2028 |
-
Excluding:
EMI/EMC (Cl.19.11.4.1
to 19.11.4.4),
Components (Cl.24).
"(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors
(For testing charges please refer relevant Part 2 standard in LIMS)" |
| 13255 |
UL India Private limited, Gurgaon
| 8127226
| IS 13252 : Part 1 (2010) |
Information technology equipment - Safety: Part 1 general requirements (Second Revision) |
- |
195000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 1.6(Power interface .) |
- |
5000 |
|
Test |
| 1.7(Markings and instructions) |
- |
1000 |
|
Test |
| 2.1(Protection from electric shock and energy hazards) |
- |
8000 |
|
Test |
| 2.2(SELV circuits) |
- |
3000 |
|
Test |
| 2.3(TNV circuits) |
- |
5000 |
|
Test |
| 2.4(Limited current circuits) |
- |
3000 |
|
Test |
| 2.5(Limited power sources .) |
- |
5000 |
|
Test |
| 2.6(Provisions for earthing and bonding) |
- |
3000 |
|
Test |
| 2.7(Overcurrent and earth fault protection in primary circuits) |
- |
2000 |
|
Test |
| 2.8(Safety interlocks) |
- |
2500 |
|
Visual |
| 2.9(Electrical insulation) |
- |
37000 |
|
Test |
| 2.10(Clearances, creepage distances and distances through insulation) |
- |
22000 |
|
Measurement |
| 3.1(General) |
- |
1000 |
|
Visual |
| 3.2(Connection to a mains supply) |
- |
2500 |
|
Visual |
| 3.3(Wiring terminals for connection of external conductors) |
- |
1000 |
|
Visual |
| 3.4(Disconnection from the mains supply) |
- |
1000 |
|
Visual |
| 3.5(Interconnection of equipment) |
- |
1000 |
|
Visual |
| 4.1(Stability) |
- |
1000 |
|
Test |
| 4.2(Mechanical strength) |
- |
15000 |
|
Test |
| 4.3(Design and construction) |
- |
10000 |
|
Test |
| 4.4(Protection against hazardous moving parts) |
- |
500 |
|
Visual |
| 4.5(Thermal requirements) |
- |
16000 |
|
Test |
| 4.6(Openings in enclosures) |
- |
16000 |
|
Test |
| 4.7(Resistance to fire) |
- |
5000 |
|
Test |
| 5.1(Touch current and protective conductor curren) |
- |
3000 |
|
Test |
| 5.2(Electric strength) |
- |
3000 |
|
Test |
| 5.3(Abnormal operating and fault conditions) |
- |
5000 |
|
Test |
| 6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment) |
- |
2000 |
|
Test |
| 6.2(Protection of equipment users from overvoltages on networks telecommunication) |
- |
2000 |
|
Test |
| 6.3(Protection of the telecommunication wiring system from overheating) |
- |
2000 |
|
Test |
| 7.1(General) |
- |
500 |
|
Visual |
| 7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment) |
- |
2000 |
|
Test |
| 7.3(Protection of equipment users from overvoltages on the cable distribution system) |
- |
1000 |
|
Test |
| 7.4(Insulation between primary circuits and cable distribution systems) |
- |
500 |
|
Test |
| 1.5(Components) |
- |
1000 |
|
Visual verification of components and associated certificates |
| 2.8.2/2.8.5(Interlock switches) |
- |
1000 |
|
Visual verification of components and associated certificates |
| 2.8.7(Switches and Relay) |
- |
500 |
|
Visual verification of components and associated certificates |
| 2.10.5.4(Opto-coupler) |
- |
500 |
|
Visual verification of components and associated certificates |
| 2.10.5.12(Wires in wound components) |
- |
500 |
|
Visual verification of components and associated certificates |
| 2.10.6(PCB material) |
- |
500 |
|
Visual verification of components and associated certificates |
| 3.2.5(Non re-wirable plug with PVC sheathed cable) |
- |
500.0 |
|
Visual verification of components and associated certificates |
| 4.2.8(Cathode Ray Tubes) |
- |
0 |
|
Not applicable as no products with such construction |
| 4.3.12(Flammable liquids) |
- |
0 |
|
Not applicable as no products with such construction |
| 4.3.13.2(Ionizing radiation) |
- |
0 |
|
Not applicable as no products with such construction |
| 4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test) |
- |
0 |
|
Not applicable as no products with such construction |
| 4.3.13.4(Human exposure to ultraviolet (UV) radiation) |
- |
500 |
|
Visual verification of components and associated certificates |
| 4.3.13.5(LED, laser class) |
- |
500 |
|
Visual verification of components and associated certificates |
| Annex A3(Hot flaming oil test) |
- |
0 |
|
Not applicable as no products with such construction not applicable |
| Annex U(Insulating winding wires for use without interleaved insulation) |
- |
500 |
|
Visual verification of components and associated certificates |
| Annex CC(Evaluation of integrated circuit (IC) current limiters) |
- |
500 |
|
Visual verification of components and associated certificates |
| Annex K(Thermal Control) |
- |
500 |
|
Visual verification of components and associated certificates |
| Annex Q(Voltage Dependent Resistors) |
- |
500 |
|
Visual verification of components and associated certificates |
| 4.3.10(Dust, powders, liquids and gases) |
- |
0 |
|
Not applicable as no products with such construction |
| 4.3.11(Containers for liquids or gases) |
- |
0 |
|
Not applicable as no products with such construction |
|
07 Aug, 2028 |
-
Excluding:
Cl. 1.5 (Components), Cl. 2.8.2/2.8.5 (Interlock switches), Cl. 2.8.7 (Switches and Relay), Cl. 2.10.5.4 (Opto-coupler), Cl. 2.10.5.12 (Wires in wound components), Cl. 2.10.6 (PCB material), Cl. 3.2.5 (Non re-wirable plug with PVC sheathed cable), Cl. 4.3.13.2 (Ionizing radiation), Cl. 4.3.13.3/ Annex Y (Effect of UV radiation on material/Ultraviolet conditioning test), Cl. 4.3.13.4 (Human exposure to ultraviolet (UV) radiation), Cl. 4.3.13.5 (LED, laser class), Cl. Annex U (Insulating winding wires for use without interleaved insulation), Cl. Annex CC (Evaluation of integrated circuit (IC) current limiters), Annex K (Thermal Control), Annex Q (Voltage Dependent Resistors) |
| 13256 |
UL India Private limited, Gurgaon
| 8127226
| IS/IEC 60730 : Part 2 : Sec 9 (2011) |
Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing Controls |
- |
200000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8(Test finger as shown in figure 2 with force 20 N/30 N) |
- |
5000 |
|
- |
| 9(By inspection) |
- |
5000 |
|
- |
| 10.1.5(By measurement) |
- |
8000 |
|
- |
| 11.2(by inspection and by test) |
- |
25000 |
|
- |
| 12.1(As per IEC 60529) |
- |
12500 |
|
- |
| 12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C) |
- |
12500 |
|
- |
| 13.1(as per table 13.1) |
- |
10000 |
|
- |
| 14.1(As per table 14.1) |
- |
40000 |
|
- |
| 16.2(as per cl 16.2.1 to 16.2.3 ) |
- |
10000 |
|
- |
| 17.6(as per cl 17.6.1 and 17.6.2) |
- |
20000 |
|
- |
| 18.2(Impact tester) |
- |
8000 |
|
- |
| 19.2.1(By inspection) |
- |
1500 |
|
- |
| 20.1(as per table 20.2) |
- |
1000 |
|
- |
| 21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5) |
- |
10000 |
|
- |
| 22.1.1(As per cl 21.1.3 to 21.1.6) |
- |
1000 |
|
- |
| 24.1(as per IEC 60127 or IEC 60269) |
- |
0 |
|
- |
| 25(as per annexure H) |
- |
10000 |
|
- |
| 27.2(as per cl 27.2.1 and 27.2.2) |
- |
10000 |
|
- |
| 15(as per cl 15.1 to 15.4) |
- |
5000 |
|
- |
|
07 Aug, 2028 |
-
Excluding:
EMI/EMC requirements
– emission (Cl.23),
EMI/EMC requirements
– immunity (Cl.26) |
| 13257 |
UL India Private limited, Gurgaon
| 8127226
| IS 10322 : Part 5 : Sec 1 (2012) |
Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision) |
- |
61500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Classification of Luminaires') |
- |
500 |
|
N/A |
| 7.0(Construction) |
- |
1000 |
|
N/A |
| 8.0(Creepage Distance and Clearances) |
- |
500 |
|
N/A |
| 9.0(Provision for earthing) |
- |
1000 |
|
N/A |
| 10.0(Terminals) |
- |
1000 |
|
N/A |
| 11.0(External & Internal Wiring) |
- |
1000 |
|
N/A |
| 12.0(Protection against electric shock) |
- |
1000 |
|
N/A |
| 13.0(Endurance Tests and Thermal Tests) |
- |
30000 |
|
N/A |
| 14.0(Resistance to Dust & Moisture) |
- |
15000 |
|
N/A |
| 15.0(Insulation Resistance and Electric Strength) |
- |
5000 |
|
N/A |
| 16.0(Resistance to Heat , fire and tracking) |
- |
5000 |
|
N/A |
| 17.0(Photometric Test) |
- |
10000 |
|
N/A |
|
07 Aug, 2028 |
-
Scope restricted for rating up to 600 V. |
| 13258 |
UL India Private limited, Gurgaon
| 8127226
| IS 10322 : Part 5 : Sec 2 (2012) |
Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision) |
- |
71500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6(Marking) |
- |
500 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 7(Construction) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 8(Creepage Distance and Clearances) |
- |
500 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 9(Provision for earthing) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 10(Terminals) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 11(External & Internal Wiring) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 12(Protection against electric shock) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 13(Endurance Tests and Thermal Tests) |
- |
30000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 14(Resistance to Dust and Moisture) |
- |
15000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 15(Insulation Resistance and Electric Strength) |
- |
5000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 16(Resistance to Heat , fire and tracking) |
- |
5000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
| 17(Photometric Test) |
- |
10000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges. |
|
07 Aug, 2028 |
-
Scope restricted for rating up to 600 V and Gonio Photometer Travel Length up to 8.5 m (Cl.17 & RD Cl.6.2 of IS 13383 (Part-1). |
| 13259 |
UL India Private limited, Gurgaon
| 8127226
| IS 15885 : Part 2 : Sec 13 (2012) |
Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules |
- |
62438 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Marking) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges |
| 8(Protection against accidental contact with live parts) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges |
| 9(Terminals) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges |
| 10(PROVISION FOR EARTHING) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges |
| 11(MOISTURE RESISTANCE) |
- |
7000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges |
| 12(Electric Strength) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges |
| 14(Fault conditions) |
- |
14438 |
|
For BIS Samples: 1.5 times of BIS Testing Charges |
| 15(Transformer heating) |
- |
10000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges |
| 17(Creepage distance and clearances) |
- |
5000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges |
| 18(Screws, current carrying parts and connections) |
- |
1000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges |
| 19(Resistance to heat, fire and tracking) |
- |
10000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges |
| 20(Resistance to corrosion) |
- |
10000 |
|
For BIS Samples: 1.5 times of BIS Testing Charges |
|
07 Aug, 2028 |
-
Excluding:
Components
(Enclosure, Bridging
resistor in primary
circuit, Capacitor and
RC units, RF
suppression (X-Y
capacitors) Inductor,
MOV/VDR, SMPS /
Mains Transformer,
PCB material, Metal
base PCB for LED,
Transparent cover,
bobbin, Insulated tape,
Heat shrinkage sleeve,
Connector, Fuse,
Internal wire, LED,
Optocoupler, EMI/EMC
filter,
Winding wire, Thin sheet
materials. |
| 13260 |
UL India Private limited, Gurgaon
| 8127226
| IS 16102 : Part 1 (2012) |
Self - Ballasted led lamps for general lighting services: Part 1 safety requirements |
- |
43875 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Marking) |
- |
5000 |
|
Marking test |
| 6(Interchangeability) |
- |
8000 |
|
Test |
| 7(Protection against accidental contact with live parts) |
- |
3000 |
|
Test |
| 8(Insulation Resistance and Electric Strength) |
- |
2000 |
|
Test |
| 9(MECHANICAL STRENGTH) |
- |
6875 |
|
Test |
| 10(cap temperature) |
- |
5000 |
|
Test |
| 11(Resistance to Heat) |
- |
2000 |
|
Test |
| 12(Resistance to Flame and Ignition) |
- |
1000 |
|
Test |
| 13(Fault conditions) |
- |
10000 |
|
Test |
| 14(Creepage distance and clearances) |
- |
1000 |
|
Measurement |
|
07 Aug, 2028 |
-
Scope restricted for
rating up to 600 V
and cap type B22d, E14
& E27 only |
