| 13291 |
Central Institute of Petrochemical Engineering and Technology (CIPET), Guwahati
| 5117534
| IS 7834 : Part 2 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows |
All |
1600 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2(Manufacture) |
- |
500 |
|
All dimensions charge are inclusive |
| 2.2.2, Table 1(45 ̊ Elbow Laying
Length) |
- |
0 |
|
- |
| 2.2.3( inside diameter of the socket) |
- |
0 |
|
- |
| 2.2.3(socket length) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
- |
| 13292 |
Central Institute of Petrochemical Engineering and Technology (CIPET), Guwahati
| 5117534
| IS 7834 : Part 1 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements |
All |
6725 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4(Minimum Thickness) |
- |
500 |
|
- |
| Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length) |
- |
0.0 |
|
socket length, Internal ID & tolerance all are inclusive in this charge |
| Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length) |
- |
0.0 |
|
- |
| Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter) |
- |
0.0 |
|
- |
| Cl. 6.1(Stress Relief Test- Appendix A) |
- |
700 |
|
- |
| Cl. 6.2(Opacity- Appendix B) |
- |
575 |
|
- |
| Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C) |
- |
3000 |
|
All effect on water test parameters are included in this charge |
| Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C) |
- |
0 |
|
- |
| Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C) |
- |
0 |
|
- |
| Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C) |
- |
0 |
|
- |
| Cl. 6.4(Short-Term Hydraulic Test- Appendix D) |
- |
850 |
|
- |
|
31 Dec, 2026 |
-
- |
| 13293 |
Central Institute of Petrochemical Engineering and Technology (CIPET), Guwahati
| 5117534
| IS 6192 (1994) |
Textiles – Monoaxially oriented high density polyethylene tapes – Specification (second revision) |
All |
4250 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(Linear density (For test method Refer IS 6193:1971 and IS 7703 Part 1)) |
- |
500 |
|
- |
| 5.5(Thickness (For test method Refer IS 6193:1971)) |
- |
250 |
|
- |
| 5.4(Finished width (For test method Refer IS 6193:1971)) |
- |
250 |
|
- |
| 5.3(Elongation (For test method Refer IS 6193:1971)) |
- |
1100 |
|
- |
| 5.2(Tenacity (For test method Refer IS 6193:1971)) |
- |
250 |
|
- |
| 5.6(Heat Shrinkage at 60 degree C(For test method Refer IS 6193:1971)
) |
- |
700 |
|
- |
| 5.6(Heat Shrinkage at 95 degree C(For test method Refer IS 6193:1971)
) |
- |
700 |
|
- |
| 4(MATERIAL(Refer IS 7328 :1974)) |
- |
500 |
|
- |
|
31 Dec, 2026 |
-
- |
| 13294 |
Central Institute of Petrochemical Engineering and Technology (CIPET), Guwahati
| 5117534
| IS 4985 (2000) |
Unplasticized pvc pipes for potable water supplies - Specification (Third Revision) |
upto DN 315mm |
23925 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(CLASSIFICATION OF PIPES) |
- |
0.0 |
|
- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum)) |
- |
500 |
|
Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500 |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum)) |
- |
0 |
|
Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500 |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation) |
- |
0 |
|
Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500 |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum)) |
- |
0 |
|
Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500 |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum)) |
- |
0 |
|
Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500 |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum)) |
- |
0 |
|
Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500 |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length) |
- |
0 |
|
Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500 |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum)) |
- |
0 |
|
Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500 |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum)) |
- |
0 |
|
Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500 |
| 7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement) |
- |
0 |
|
Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500 |
| 10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance) |
- |
300 |
|
- |
| 10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity) |
- |
575 |
|
- |
| 9.1(PIPE ENDS) |
- |
0 |
|
compiled with the test charges for cl no. 10.1 |
| 10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test) |
- |
900 |
|
- |
| 10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature) |
- |
1100 |
|
- |
| 10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density) |
- |
500 |
|
- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)) |
- |
11000 |
|
- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)) |
- |
850 |
|
- |
| Clause 10.7(Sulphated Ash Content) |
- |
950 |
|
- |
| 11.2(Resistance to External Blows at 0°C) |
- |
1400 |
|
- |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring
Sockets) |
- |
5000 |
|
- |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring
Sockets) |
- |
850 |
|
- |
|
31 Dec, 2026 |
-
- |
| 13295 |
BIS, Central Laboratory (CL)
| None
| IS 4572 (2014) |
Fibre ropes – Polyamide 3- 4- 8- and 12-Strand ropes |
- |
Rs 1360/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.5.1 Polyamide ropes ( shall be made in one of the following constructions:
— type A: 3-strand hawser-laid rope (see Figure 1);
— type B: 4-strand shroud-laid rope (see Figure 2);
— type L: 8-strand braided rope (see Figure 3);
— type T: 12-strand braided rope (see Figure 4).) |
- |
|
|
|
| 5.2
(Cl. 4.4.2) of ISO 9554: 2010
(Workmanship) |
- |
|
|
|
| 5.2
(Cl. 4.4.1) of ISO 9554: 2010 (Workmanship) |
- |
|
|
|
| 5.2
(Cl. 4.3) of ISO 9554: 2010
(Treatment
) |
- |
|
|
|
| 5.2
(Cl. 4.2) of ISO 9554: 2010
(Structure of rope) |
- |
|
|
|
| 5.2
(Cl. 4.2) of ISO 9554: 2010
(No. of Yarns in rope ) |
- |
|
|
|
| 5.2
(Cl. 4.2) of ISO 9554: 2010
(Construction & Structure ) |
- |
|
|
|
| 5.2
Cl. 4.1 (b) of ISO 9554: 2010
(Constituent Materials As per ) |
- |
|
|
|
| Cl.6 Tables 1, 2 and 3. (Cl.Linear density and minimum breaking force shall be in accordance with Tables 1, 2 and 3.) |
- |
|
|
|
|
- |
-
- |
| 13296 |
MSME Testing Centre, New Delhi
| 8101204
| IS 1341 (2018) |
Steel Butt Hinges - Specification (Sixth Revision) |
- |
3900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 Tables 2 to 9(Types) |
- |
300 |
|
- |
| 5.1 Tables 2 to 9 (2)(Size of Hinge) |
- |
300 |
|
- |
| 5.1 Tables 2 to 9 (3)(Length A) |
- |
300 |
|
- |
| 5.1 Tables 2 to 9 (4)(Breadth B) |
- |
300 |
|
- |
| 5.1 Tables 2 to 9 (4)(Breadth B1) |
- |
300 |
|
- |
| 5.1 Tables 2 to 9 (4)(Breadth B2) |
- |
300 |
|
- |
| 5.1 Tables 2 to 9 (5)(Thickness of Flap C) |
- |
300 |
|
- |
| 5.1 Tables 2 to 9 (6)(Diameter of Hinge Pin D) |
- |
300 |
|
- |
| 5.1 Tables 2 to 9 (7)(Number of Knuckles) |
- |
300 |
|
- |
| 5.1 Tables 2 to 9 (8)(Number of Screw Holes) |
- |
300 |
|
- |
| 5.1 Tables 2 to 9 (9)(Holes for Screw No.) |
- |
300 |
|
- |
| 6.1(General) |
- |
300 |
|
- |
| 6.1(General) |
- |
300 |
|
- |
| 6.1(General) |
- |
300 |
|
- |
| 6.2.1(Knuckles) |
- |
300 |
|
- |
| 6.3(Pins) |
- |
300 |
|
- |
| 6.4(Screw Holes) |
- |
300 |
|
- |
| 6.4.2(Position of Holes) |
- |
300 |
|
- |
| 6.4.2(X) |
- |
300 |
|
- |
| 6.4.2(Y) |
- |
300 |
|
- |
| 6.4.2(Z) |
- |
300 |
|
- |
| 6.4.2.1(Position of Holes) |
- |
300 |
|
- |
|
31 Dec, 2026 |
-
- |
| 13297 |
Central Institute of Petrochemical Engineering and Technology (CIPET), Guwahati
| 5117534
| IS 2508 (2016) |
Polyethylene films and sheets - Specification (Third Revision) |
ALL |
17725.00 View breakup
FOR OTHERS : Rs. 14350/- + GST for Low Density Polyethylene Films (Natural) Type I & II. Rs. 7700/- GST for Low Density Polyethylene Films (Natural) Type III & IV Rs. 16925/- + GST for Low Density Polyethylene Films (Black) Type I & II. Rs. 10275/- + GST for Low Density Polyethylene Films(Black) Type III & IV. For PE Film & sheet - Raw Materials Rs. 2650/- + GST for Natural Compound Rs. 1500/- + GST for Black Compound. Rs. 4075/- + GST for Carbon Black Masterbatch (Optional). Rs. 5100/- + GST for Carbon Black Powder (Optional). FOR BIS : Rs. 12025/- + GST for Low Density Polyethylene Films (Natural) Type I & II. Rs. 5900/- + GST for Low Density Polyethylene Films (Natural) Type III & IV. Rs. 13956/- + GST for Low Density Polyethylene Films (Black) Type I & II. Rs. 7831/- + GST for Low Density Polyethylene Films (Black) Type III & IV. For PE Film & sheet - Raw Materials. For PE Film & sheet - Raw Materials Rs. 1988/- + GST for Natural Compound. Rs. 375/- + GST for Black Compound. Rs. 3056/- + GST for Carbon Black Masterbatch (Optional). Rs. 3825/- + GST for Carbon Black Powder (Optional).
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1)) |
- |
500 |
|
- |
| 5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1)) |
- |
1100 |
|
- |
| 5.1.6a(Carbon Black Content, Annex-A) |
- |
925 |
|
- |
| 5.1.6b(Ash Content, Annex-A) |
- |
950 |
|
- |
| 5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530) |
- |
700 |
|
- |
| 5.2.2(Tolerance on Thickness, Annex-A) |
- |
500 |
|
- |
| 6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1)) |
- |
1225 |
|
- |
| 6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3)) |
- |
1225 |
|
- |
| 6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 ) |
- |
4300 |
|
- |
| 6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) ) |
- |
1225 |
|
- |
| 6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) ) |
- |
1225 |
|
- |
| 6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) ) |
- |
1000 |
|
- |
| 6.1, Table 1(Tear resistence. A) Machine direction Annex B) |
- |
875 |
|
- |
| 6.1, Table 1(Tear resistence. B) Transverse direction ) |
- |
875 |
|
- |
| 8.1, Table 3(Puncture resistance , Annex C) |
- |
1100 |
|
- |
| 9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0.0 |
|
- |
| 9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0.0 |
|
- |
| 9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0.0 |
|
- |
| 9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0.0 |
|
- |
|
31 Dec, 2026 |
-
- |
| 13298 |
CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL
| 8100534
| IS 14635 : Part 1 (2020) |
Fluoropolymer Dispersions and Moulding and Extrusion Materials Part 1 Designation System ( First Revision ) |
- |
7300.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.5.1.1.1(Standard Specific Gravity in accordance with IS 14635 part 2) |
- |
500.00 |
|
- |
| 4.5.1.1.3(Bulk Density) |
- |
500.00 |
|
- |
| 4.5.1.1.5(Tensile Properties (Tensile stress) in accordance with IS 13360 (Part 5/Sec 2)) |
- |
1350.00 |
|
1100.00 (Testing Charge) + 250.00 (Conditioning charge) |
| 4.5.1.1.5(Tensile Properties (Elongation) in accordance with IS 13360 (Part 5/Sec 2)) |
- |
1350.00 |
|
1100.00 (Testing Charge) + 250.00 (Conditioning charge) |
| 4.5.1.1.6(Dielectric strength (IEC 60243-1 or ASTM D 149)) |
- |
1350.00 |
|
1100.00 (Testing Charge) + 250.00 (Conditioning charge) |
| 4.5.1.1.9(Melting Peak Temperature in accordance with IS 14635 (Part 2) |
- |
2250.00 |
|
2200.00 (Testing Charge) + 250.00 (Conditioning charge) |
|
31 Dec, 2026 |
-
- |
| 13299 |
MSME Testing Centre, New Delhi
| 8101204
| IS 2082 (2018) |
Stationary storage type electric water heaters - Specification (Fifth Revision) |
0 |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| (Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts) |
- |
2500 |
|
- |
| (Cl.10 of IS 302-2-21: 2011)(Power Input & Current) |
- |
2500 |
|
- |
| (Cl.11 of 302-2-21:2011)(Heating) |
- |
3000 |
|
- |
| (Cl.13 of IS 302-2-21:2011)(Leakage Current ) |
- |
4000 |
|
- |
| (Cl.14ofIS302-2-21:2011)(Transient Over Voltages) |
- |
2000 |
|
- |
| (Cl.15 of IS 302-2-21-2011)(Moisture Resistance) |
- |
4000 |
|
- |
| Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current ) |
- |
4000 |
|
- |
| (Cl.19 of IS 302-2-21:2011)(Abnormal Operation) |
- |
2000 |
|
- |
| (Cl.21ofIS302-2-21:2011)(Mechanical strength) |
- |
2000 |
|
- |
| (Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords) |
- |
2000 |
|
- |
| (Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors) |
- |
2000 |
|
- |
| (Cl.27 of IS 302-2-21:2011)(Provision for Earthing) |
- |
2000 |
|
- |
| (Cl.28 of IS 302-2-21:2011)(Screws & Connections) |
- |
2000 |
|
- |
| (Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire) |
- |
4000 |
|
- |
| Cl.31 of IS 302-2-21:2018(Resistance to Rusting) |
- |
2500 |
|
- |
| (Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation) |
- |
25000 |
|
- |
|
31 Dec, 2026 |
-
Excl: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test) |
| 13300 |
BIS, Central Laboratory (CL)
| None
| IS/ISO 3183 (2007) |
Petroleum and Natural Gas Industries - Steel Pipe for Pipeline Transportation Systems (Amalgamating IS1978:1982 and IS1979:1985) |
- |
Rs. 14242/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 9.13 (Height of Weld bead) |
- |
|
|
|
| Cl 9.12 (Finish of Pipe Ends) |
- |
|
|
|
| Cl 9.12 (Finish of Pipe Ends) |
- |
|
|
|
| Cl 9.12 (Finish of Pipe Ends) |
- |
|
|
|
| Cl 9.12 (Finish of Pipe Ends) |
- |
|
|
|
| Cl 9.12 (Finish of Pipe Ends) |
- |
|
|
|
| Cl 9.11 (Dimensions, Mass & Tolerances) |
- |
|
|
|
| Cl 9.11 (Dimensions, Mass & Tolerances) |
- |
|
|
|
| Cl 9.11 (Dimensions, Mass & Tolerances) |
- |
|
|
|
| Cl 9.11 (Dimensions, Mass & Tolerances) |
- |
|
|
|
| Cl 9.11 (Dimensions, Mass & Tolerances) |
- |
|
|
|
| Cl 9.10 (Surface Conditions. Imperfections and defects) |
- |
|
|
|
| Cl 9.9 (DWT Test (For PSL 2 Welded Pipe)) |
- |
|
|
|
| Cl 9.8 (CVN Impact Test (For PSL 2 Pipe)) |
- |
|
|
|
| Cl 9.7 (Guided Bend Test) |
- |
|
|
|
| Cl 9.6 (Flattening Test - IS 2328) |
- |
|
|
|
| Cl 9.5 (Bend Test - IS 2329) |
- |
|
|
|
| Cl 9.3 - Table 6 & 7 (Tensile Properties) |
- |
|
|
|
| Cl 9.3 - Table 6 & 7 (Tensile Properties) |
- |
|
|
|
| Cl 9.3 - Table 6 & 7 (Tensile Properties) |
- |
|
|
|
| Cl 9.3 - Table 6 & 7 (Tensile Properties) |
- |
|
|
|
| Cl 9.13 (Height of Weld bead) |
- |
|
|
|
| Cl 9.12 (Finish of Pipe Ends) |
- |
|
|
|
| Cl 9.12 (Finish of Pipe Ends) |
- |
|
|
|
| Cl 9.12 (Finish of Pipe Ends) |
- |
|
|
|
| Cl 9.12 (Finish of Pipe Ends) |
- |
|
|
|
| Cl 9.12 (Finish of Pipe Ends) |
- |
|
|
|
| Cl 9.11 (Dimensions, Mass & Tolerances) |
- |
|
|
|
| Cl 9.11 (Dimensions, Mass & Tolerances) |
- |
|
|
|
| Cl 9.11 (Dimensions, Mass & Tolerances) |
- |
|
|
|
| Cl 9.11 (Dimensions, Mass & Tolerances) |
- |
|
|
|
| Cl 9.11 (Dimensions, Mass & Tolerances) |
- |
|
|
|
| Cl 9.10 (Surface Conditions. Imperfections and defects) |
- |
|
|
|
| Cl 9.9 (DWT Test (For PSL 2 Welded Pipe)) |
- |
|
|
|
| Cl 9.8 (CVN Impact Test (For PSL 2 Pipe)) |
- |
|
|
|
| Cl 9.7 (Guided Bend Test) |
- |
|
|
|
| Cl 9.6 (Flattening Test - IS 2328) |
- |
|
|
|
| Cl 9.5 (Bend Test - IS 2329) |
- |
|
|
|
| Cl 9.3 - Table 6 & 7 (Tensile Properties) |
- |
|
|
|
| Cl 9.3 - Table 6 & 7 (Tensile Properties) |
- |
|
|
|
| Cl 9.3 - Table 6 & 7 (Tensile Properties) |
- |
|
|
|
| Cl 9.3 - Table 6 & 7 (Tensile Properties) |
- |
|
|
|
|
- |
-
EXCLUDING -; i] cl 9.4 hydrostaic test , ii] cl 9.10.1.3 imperfection, iii] cl 9.10.6 hard spots |
| 13301 |
BIS, Central Laboratory (CL)
| None
| IS 3549 (2017) |
Rubber hoses and hose assemblies for water suction and discharge - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4 (Classification) |
- |
|
|
|
| Cl 5 (Couplings and end fittings) |
- |
|
|
|
| Cl 6.1 (Lining) |
- |
|
|
|
| Cl 6.2 (Reinforcement) |
- |
|
|
|
| Cl 6.3 (Cover) |
- |
|
|
|
| Cl 7.1 & Table 3 (Bore (inside diameter)) |
- |
|
|
|
| Cl 7.2 (Enlarged ends) |
- |
|
|
|
| Cl 7.3 (Unit lengths) |
- |
|
|
|
| Cl 7.4 & Table 4 (Lining) |
- |
|
|
|
| Cl 7.5 (Cover) |
- |
|
|
|
| Cl 8.1.2 & Table 1 (Tensile strength, min.) |
- |
|
|
|
| Cl 8.1.2 & Table 1 (Tensile strength, min.) |
- |
|
|
|
| Cl 8.1.2 & Table 1 (Elongation at break, min.) |
- |
|
|
|
| Cl 8.1.2 & Table 1 (Elongation at break, min.) |
- |
|
|
|
| Cl 8.1.3 & Table 1 (Resistance to ageing-Change in tensile strength from
original value (max.)) |
- |
|
|
|
| Cl 8.1.3 & Table 1 (Resistance to ageing-Change in tensile strength from
original value (max.)) |
- |
|
|
|
| Cl 8.1.3 & Table 1 (Resistance to ageing-Change in elongation at break from
original value (max.) ) |
- |
|
|
|
| Cl 8.1.3 & Table 1 (Resistance to ageing-Change in elongation at break from
original value (max.) ) |
- |
|
|
|
| Cl 8.2.1 & Table 2 (Hydrostatic-pressure requirements (proof pressure test)) |
- |
|
|
|
| Cl 8.2.1 & Table 4 (Variation in length at max. working pressure) |
- |
|
|
|
| Cl 8.2.2 & Table 2 (When tested by the method specified in ISO 1402, hoses shall meet the requirements of Table 2.) |
- |
|
|
|
| Cl 8.2.3 & Table 3 (Resistance to bending (minimum bend radius as a function of nominal size)) |
- |
|
|
|
| Cl 8.2.4 & Table 4 (Resistance to suction flattening) |
- |
|
|
|
| Cl 8.2.5 & Table 4 (Low-temperature flexibility) |
- |
|
|
|
|
- |
-
EXCLUDING :Test facility not avalible For ozone resistance test ,Adhesion test, low temperature flexibility, Resistence of suction flattering,Resistance of bending, burst test, Hydrostatic pressure requirement (Proof Test) |
| 13302 |
BIS, Central Laboratory (CL)
| None
| IS 7904 (1995) |
High Carbon Steel Wire Rods |
- |
Rs. 8032/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 9 (Dimensions & tolerances) |
- |
|
|
|
|
- |
-
Grade of Steel as per Table 1, Information wrt Micro Alloy addition and type of killing may also be declared. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm can only be tested.; |
| 13303 |
BIS, Central Laboratory (CL)
| None
| IS 446 (2017) |
Rubber hoses, textile - Reinforced, for compressed air - Specification (Fifth Revision) |
- |
9550 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4 (Classification) |
- |
|
|
|
| Cl 4 (Classification) |
- |
|
|
|
| Cl 4 (Classification) |
- |
|
|
|
| Cl 5 (Materials and construction) |
- |
|
|
|
| Cl 6.1 & Table 1 (Internal diameters and tolerances) |
- |
|
|
|
| Cl 6.2 (Concentricity) |
- |
|
|
|
| Cl 6.3 (Tolerance on length) |
- |
|
|
|
| Cl 6.4 (Minimum thickness of lining and cover-Type 1 ) |
- |
|
|
|
| Cl 6.4 (Minimum thickness of lining and cover-Type 1 ) |
- |
|
|
|
| Cl 6.4 (Minimum thickness of lining and cover-Type 2 ) |
- |
|
|
|
| Cl 6.4 (Minimum thickness of lining and cover-Type 2 ) |
- |
|
|
|
| Cl 6.4 (Minimum thickness of lining and cover-Type 3) |
- |
|
|
|
| Cl 6.4 (Minimum thickness of lining and cover-Type 3) |
- |
|
|
|
| Cl 7.1 & Table 2 (Minimum tensile strength) |
- |
|
|
|
| Cl 7.1 & Table 2 (Minimum tensile strength) |
- |
|
|
|
| Cl 7.1 & Table 2 (Minimum elongation at break) |
- |
|
|
|
| Cl 7.1 & Table 2 (Minimum elongation at break) |
- |
|
|
|
| Cl 7.1 & Table 2 (Resistance to ageing-Change in tensile strength from
original value (max.) ) |
- |
|
|
|
| Cl 7.1 & Table 2 (Resistance to ageing-Change in tensile strength from
original value (max.) ) |
- |
|
|
|
| Cl 7.1 & Table 2 (Resistance to ageing-Change in elongation at break
from original value (max.)
original value (max.) ) |
- |
|
|
|
| Cl 7.1 & Table 2 (Resistance to ageing-Change in elongation at break
from original value (max.)
original value (max.) ) |
- |
|
|
|
| Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (class A)) |
- |
|
|
|
| Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (class A)) |
- |
|
|
|
| Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (max.)
(class B only) ) |
- |
|
|
|
| Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (max.)
(class B only) ) |
- |
|
|
|
| Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (max.)
(class C only) ) |
- |
|
|
|
| Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (max.)
(class C only) ) |
- |
|
|
|
| Cl 7.2 & Table 3 (Proof pressure) |
- |
|
|
|
| Cl 7.2 & Table 3 (Proof pressure) |
- |
|
|
|
| Cl 7.2 & Table 3 (Proof pressure) |
- |
|
|
|
| Cl 7.2 & Table 3 (Change in length at maximum working pressure) |
- |
|
|
|
| Cl 7.2 & Table 3 (Change in diameter at maximum working pressure) |
- |
|
|
|
| Cl 7.2 & Table 3 (Minimum burst pressure) |
- |
|
|
|
| Cl 7.2 & Table 3 (Minimum burst pressure) |
- |
|
|
|
| Cl 7.2 & Table 3 (Minimum burst pressure) |
- |
|
|
|
| Cl 7.2 & Table 3 (Flexibility at 23 °C) |
- |
|
|
|
| Cl 7.2 & Table 3 (Low-temperature flexibility) |
- |
|
|
|
|
- |
-
EXCLUDING -; Test facility not avalible For Resistance to liquids,Burst test, Adhesion test, Ozone Test, Flexibility test |
| 13304 |
BIS, Central Laboratory (CL)
| None
| IS 14929 (2001) |
Textiles - High strength polyolefins copolymer ropes - Specification |
- |
Rs.2700/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (MANUFACTURE) |
- |
|
|
|
| 5.2.1 (Construction) |
- |
|
|
|
| 5.2.2 (Construction) |
- |
|
|
|
| 5.2.3 (Construction) |
- |
|
|
|
| 5.3 (Structure) |
- |
|
|
|
| 5.4 ( Rope) |
- |
|
|
|
| 6.1, Table 1 /Table 2. ( REQUIREMENTS:- Linear Density) |
- |
|
|
|
| 6.1, Table 1 /Table 2. ( Breaking Strength, Min) |
- |
|
|
|
| 6.2, Table 1 and Table 2 ( Mass of the Coil) |
- |
|
|
|
| 6.3 ( Length of Coil) |
- |
|
|
|
|
- |
-
- |
| 13305 |
MSME Testing Centre, New Delhi
| 8101204
| IS 302 : Part 2 : Sec 21 (2018) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision) |
- |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.0(Protection against access to live parts) |
- |
2500 |
|
- |
| 10.0(Input and Current) |
- |
2500 |
|
- |
| 11.0(Heating) |
- |
3000 |
|
- |
| 13.0(Leakage Current and electric strength at operating temperature) |
- |
4000 |
|
- |
| 14.0(Transient Overvoltage) |
- |
2000 |
|
- |
| 15.0(Moisture resistance) |
- |
4000 |
|
- |
| 16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment)) |
- |
4000 |
|
- |
| 19.0(Abnormal Operation) |
- |
2000 |
|
50% for Additional Core |
| 21.0(Mechanical Strength) |
- |
2000 |
|
- |
| 25.0(Supply Connection and External Flexible Cords) |
- |
2000 |
|
- |
| 26.0(Terminals for external conductors) |
- |
2000 |
|
- |
| 27.0(Provision For Earthing) |
- |
2000 |
|
- |
| 28.0(Screws and Connections) |
- |
2000 |
|
- |
| 30.0(Resistance To Heat and Fire) |
- |
4000 |
|
- |
| 31.0(Resistance To Rusting) |
- |
2500 |
|
- |
| 29.0(Creepage Distances and Clearances) |
- |
2500 |
|
- |
| 22.0(Construction) |
- |
2000 |
|
- |
| 23.0(Internal Wiring) |
- |
2000 |
|
- |
| 17.0(Overload Protection of transformer and associated circuit) |
- |
2000 |
|
- |
| 20.0(Stability and mechanical hazards) |
- |
5000 |
|
- |
|
31 Dec, 2026 |
-
Excl: Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC tests) |
| 13306 |
MSME Testing Centre, New Delhi
| 8101204
| IS 996 (2009) |
Single phase a.c. induction motors for general purpose (Third Revision) |
- |
12825 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10(Type of enclosures) |
- |
10000 |
|
- |
| 12.6(Vibration Severity) |
- |
2000 |
|
- |
| 12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 )) |
- |
5000 |
|
- |
| 12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 )) |
- |
3000 |
|
- |
| 13.1(High voltage test) |
- |
4000 |
|
- |
| 13.2(Moisture proofness) |
- |
4000 |
|
- |
| 13.3(Leakage current test) |
- |
2000 |
|
- |
| 12.7(Insulation resistance test) |
- |
4000 |
|
- |
| 12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5)) |
- |
2000 |
|
- |
|
31 Dec, 2026 |
-
- |
| 13307 |
BIS, Central Laboratory (CL)
| None
| IS 16703 (2017) |
Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification |
- |
14450 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (Mass of Bale) |
- |
|
|
|
| (Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks) |
- |
|
|
|
| (Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks) |
- |
|
|
|
| 5.2 Table 1 (Dimensions) |
- |
|
|
|
| 5.2 Table 1 (Dimensions) |
- |
|
|
|
| 5.2 Table 1 (Dimensions) |
- |
|
|
|
| 5.2 Table 1 (Dimensions) |
- |
|
|
|
| 5.2 Table 1 (Ends per dm) |
- |
|
|
|
| 5.2 Table 1 (Picks per dm) |
- |
|
|
|
| 5.2 Table 1 (Mass of sack, Gusseted type, g - IS 1964) |
- |
|
|
|
| 5.2 Table 1 (Average breaking strength of fabric [Ravelled strip
method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1)) |
- |
|
|
|
| 5.2 Table 1 (Average breaking strength of fabric [Ravelled strip
method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1)) |
- |
|
|
|
| 5.2 Table 1 (Breaking strength of bottom seam (Ravelled strip
method), Min, N) (kgf) - IS 9030) |
- |
|
|
|
| 5.2 Table 1 (Elongation at break of fabric (Ravelled strip method),
percent : IS 1969 (Part 1)) |
- |
|
|
|
| 5.2 Table 1 (Elongation at break of fabric (Ravelled strip method),
percent : IS 1969 (Part 1)) |
- |
|
|
|
|
- |
-
EXCLUDING 5.3 Drop Impact Testing of Filled Sacks, 5.5 UV Resistance,; |
| 13308 |
BIS, Central Laboratory (CL)
| None
| IS 9473 (2002) |
Respiratory protective devices - Filtering half masks to protect against particles - Specification (First Revision) |
- |
Rs. 600/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 5.2 (Cleaning and Disinfecting) |
- |
|
|
|
| Cl 5.2 (Cleaning and Disinfecting) |
- |
|
|
|
| 5.2 (Cleaning & Disinfection) |
- |
|
|
|
| Cl 5.13 (De-mountable Parts) |
- |
|
|
|
| Cl 5.13 (De-mountable Parts) |
- |
|
|
|
| 5.13 (Demountable Parts, Visual
Inspection
) |
- |
|
|
|
| Cl 5.6 (Flammability) |
- |
|
|
|
| Cl 5.6 (Flammability) |
- |
|
|
|
| 5.6 (Flammability (TC- 2
Samples)
) |
- |
|
|
|
| 5.6 (Flammability (AR-2
Samples)
) |
- |
|
|
|
| 5.6 (Flammability (TC- 2
Samples)
) |
- |
|
|
|
| 5.6 (Flammability (AR-2
Samples)
) |
- |
|
|
|
| 5.10.2.4 (Exh. Valve Tensile Force
(TC-1 Sample)
) |
- |
|
|
|
| 5.10.2.4 (Exh. Valve Tensile Force
(SW-1 Sample)
) |
- |
|
|
|
| 5.10.2.4 (Exh. Valve Tensile Force
(AR-1 Sample)
) |
- |
|
|
|
| 5.10.2.4 (Exh. Valve Tensile Force
(TC-1 Sample)
) |
- |
|
|
|
| 5.10.2.4 (Exh. Valve Tensile Force
(SW-1 Sample)
) |
- |
|
|
|
| 5.10.2.4 (Exh. Valve Tensile Force
(AR-1 Sample)
) |
- |
|
|
|
|
- |
-
- |
| 13309 |
BIS, Central Laboratory (CL)
| None
| IS 1804 (2004) |
Steel wire ropes – Fibre main cores – Specification (fourth revision) |
- |
Rs 4200/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 / 3.2 (Man-Made Fibre CoresMan-made fibre cores shall be made entirely from new
fibres of the following types: ) |
- |
|
|
|
| 5.1 (PHYSICAL REQUIREMENTS / Core Lubrication) |
- |
|
|
|
| 5.2 (PHYSICAL REQUIREMENTS / Lay length) |
- |
|
|
|
| 7.2 (Nominal Diameter and Nominal Runnage) |
- |
|
|
|
| 8 (CORE DESIGNATION) |
- |
|
|
|
| 9 / 9.1 (IDENTIFICATION) |
- |
|
|
|
| 6 / 6.1 (CHEMICAL CONTENTS / Water Soluble Acids ) |
- |
|
|
|
| 6.2 (Salt) |
- |
|
|
|
|
- |
-
Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm; |
| 13310 |
BIS, Central Laboratory (CL)
| None
| IS 17111 (2019) |
Heat - Treated steels, alloy steels and free - Cutting steels - Ball and roller bearing steels |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.7.1.2, Table- 3 (Carbon ) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Sulphur) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Phosphorus) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Manganese) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Silicon) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Aluminium) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Chromium) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Nickel) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Molybdenum) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Copper) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Vanadium) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Titanium) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Zinc) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Tungsten) |
- |
|
|
|
| Cl.7.1.2, Table- 3 (Nitrogen) |
- |
|
|
|
| Cl 4 (Classification and designation) |
- |
|
|
|
| Cl 7.5 (Surface quality) |
- |
|
|
|
| Cl 7.6 (Shape, dimensions and tolerances) |
- |
|
|
|
| Cl 7.6 (Shape, dimensions and tolerances) |
- |
|
|
|
| Cl 7.6 (Shape, dimensions and tolerances) |
- |
|
|
|
| Cl 7.6 (Shape, dimensions and tolerances) |
- |
|
|
|
| Cl 7.6 (Shape, dimensions and tolerances) |
- |
|
|
|
|
- |
-
Steel Designation as per Table 3 of IS 17111 may please be declared. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm;
EXCLUDING cl 7.2 microstruct, ii] non metallic inclusions |
| 13311 |
BIS, Central Laboratory (CL)
| None
| IS 1993 (2018) |
Cold - Reduced tinmill products - Electrolytic tinplate (Fifth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 5 (Classification) |
- |
|
|
|
| Cl 6.1 (Designation) |
- |
|
|
|
| Cl 10 (Tolerance on dimension and shape ) |
- |
|
|
|
| Cl 7.3 (Finish) |
- |
|
|
|
| Cl 7.4 (Passivation and oiling) |
- |
|
|
|
| Cl 7.5 (Imperfections) |
- |
|
|
|
| Cl 8 (Tin Coating mass ) |
- |
|
|
|
| Cl 9.2 (Hardness requirement ) |
- |
|
|
|
| Cl 9.3 (Tensile requirement ) |
- |
|
|
|
| Annex-C (Carbon ) |
- |
|
|
|
| Annex-C (Sulphur) |
- |
|
|
|
| Annex-C (Nickel) |
- |
|
|
|
| Annex-C (Manganese) |
- |
|
|
|
| Annex-C (Copper) |
- |
|
|
|
| Annex-C (Chromium) |
- |
|
|
|
| Annex-C (Silicon) |
- |
|
|
|
| Annex-C (Molybdenum) |
- |
|
|
|
|
- |
-
Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm;
EXCLUDING for material < 0.8 mm thikcness only C& S can be tested. Test facility not available for Tin Coating; i] cl 8 tin coating mass, ii] cl 6.3 passivation and oiling, iii] cl 9 proof strength |
| 13312 |
BIS, Central Laboratory (CL)
| None
| IS 10080 (1982) |
Specification for vibration machine for casting standard cement mortar cubes |
- |
Rs.3300.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.4, table 2 (DIMENSIONS AND TOLERANCES) |
- |
|
|
|
| (Cl 3.4.1 of IS 10080 & 5.1 of IS:10086) (Other Requirements (Construction)) |
- |
|
|
|
| (Cl 5.2, IS:10086) (Special Requirements for cube moulds) |
- |
|
|
|
| (Cl 5.3,IS:10086) (Arrangement for Fastening/Clamping) |
- |
|
|
|
|
- |
-
- |
| 13313 |
BIS, Central Laboratory (CL)
| None
| IS 4808 (1982) |
Specification for pyrethrum emulsifiable concentrates (First Revision) |
- |
Rs 6150/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2.1 (Description) |
- |
|
|
|
| 2.2.4 (Flash Point) |
- |
|
|
|
| 2.2.3 (Cold test) |
- |
|
|
|
| 2.2.5 (Emulsion Stability) |
- |
|
|
|
| 2.3 (Total Pyrethrin Content ) |
- |
|
|
|
| 2.2.6 (Heat Stability) |
- |
|
|
|
| 2.2.3 (Cold test) |
- |
|
|
|
| 2.1 (Constituents ) |
- |
|
|
|
|
- |
-
EXCLUDING Cl. 2.2.2 & Cl. 2.3 Identity test & Total Pyrethrin Content; |
| 13314 |
BIS, Central Laboratory (CL)
| None
| IS 9665 (1981) |
Specification for propoxur emulsifiable concentrates |
- |
Rs.5100/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2.1 (Description) |
- |
|
|
|
| 2.2.2 (Cold Test) |
- |
|
|
|
| 2.2.3 (Flash Point) |
- |
|
|
|
| 2.2.4 (Emulsion Stability) |
- |
|
|
|
| 2.3.2 (Acidity) |
- |
|
|
|
| 2.3.1 (Propoxur Content, NV upto 9) |
- |
|
|
|
| 2.3.1 (Propoxur Content, NV above 9 and below 50) |
- |
|
|
|
| 2.3.1 (Propoxur Content, NV above 50) |
- |
|
|
|
|
- |
-
- |
| 13315 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 3062 (1995) |
Crop protection equipment - Rocker sprayer - Specification (Fourth Revision) |
- |
Rs. 4950/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| (F-6) (Workmanship and Finish) |
- |
|
|
|
| Cl. 6.5 (Other requiremnt) |
- |
|
|
|
| (F-4) (Other requiremnt) |
- |
|
|
|
| (F-3) (Performance Requirement) |
- |
|
|
|
| (F-3) (Performance Requirement) |
- |
|
|
|
| (F-3) (Performance Requirement) |
- |
|
|
|
| (Table 1 of IS 3652) (Material) |
- |
|
|
|
| ( F-11) (Type) |
- |
|
|
|
| ( F-11) (Marking) |
- |
|
|
|
| ( D - 4) (Other requirment) |
- |
|
|
|
| ( D - 3) (Dimensions) |
- |
|
|
|
| (D-2 and Table 1 of IS3652) (Material) |
- |
|
|
|
| (D-1) (Types) |
- |
|
|
|
| (D-5) (Marking) |
- |
|
|
|
| ( C - 9 ) (ii) Leakage and Reliability test) |
- |
|
|
|
| ( C - 8 ) (Tests (C-7) i) Strength test) |
- |
|
|
|
| ( C - 6) (Operating Trigger/ Knob) |
- |
|
|
|
| ( C - 5 ) (Gaskets ) |
- |
|
|
|
| (C-4) (End Fittings i) Inlet ii) outlet) |
- |
|
|
|
| ( C - 2) (Dimensions) |
- |
|
|
|
| Table 1 of IS 3652 ) (Material) |
- |
|
|
|
| (C-10) (Types ( C-1 )) |
- |
|
|
|
| (C-10) (Marking) |
- |
|
|
|
| (Cl. 9.1) (MARKING) |
- |
|
|
|
| (Cl.8) (Workmanship and Finish) |
- |
|
|
|
| (Cl. 7) (Other requirements) |
- |
|
|
|
| (Cl. 6.11) (Total Mass) |
- |
|
|
|
| (Cl. 6.10) (Gaskets) |
- |
|
|
|
| 4.8.2 (c) test for hose connection) |
- |
|
|
|
| 4.8.2 (b) For cut- off device ) |
- |
|
|
|
| 4.8.2 ( Hose Connections a) For delivery spout ) |
- |
|
|
|
| (Cl. 6.9 , 4.8.1 ) (Discharge Line, Delivery hose) |
- |
|
|
|
| 4.7.3 ( b) For Strainer Body) |
- |
|
|
|
| 4.7.3 ( Hose Connections a) For Suction spout) |
- |
|
|
|
| 4.7.2 ( Strainer Assembly a) stainer b) Stainer body) |
- |
|
|
|
| (Cl. 6.8) & 4.7.1 (Suction Line, and suction hose) |
- |
|
|
|
| 4.6.2 ( Delivery Spout) |
- |
|
|
|
| 4.6.1 & 6.7 (Suction , delivery spout and suctionspout) |
- |
|
|
|
| Cl. 6.5 (Pressure Chamber) |
- |
|
|
|
| Cl. 6.5 (Pressure Chamber) |
- |
|
|
|
| Cl. 6.5 (Pressure Chamber) |
- |
|
|
|
| 4.4.4 ( Piston Rod) |
- |
|
|
|
| 4.4.4 ( Piston Rod) |
- |
|
|
|
| 4.4.3 (Piston Spreaded) |
- |
|
|
|
| 4.4.2 ( Piston) |
- |
|
|
|
| Cl. 6.4 and 4.4.1 (Pump and pump cylinder) |
- |
|
|
|
| Cl. 6.4 and 4.4.1 (Pump and pump cylinder) |
- |
|
|
|
| Cl. 6.4 and 4.4.1 (Pump and pump cylinder) |
- |
|
|
|
| Cl. 6.4 and 4.4.1 (Pump and pump cylinder) |
- |
|
|
|
| Cl. 6.3 (Handle Lever and Extension ) |
- |
|
|
|
| Cl. 6.3 (Handle Lever and Extension ) |
- |
|
|
|
| Cl. 6.3 (Handle Lever and Extension ) |
- |
|
|
|
| Cl. 6.2 (Frame) |
- |
|
|
|
| Cl. 6.1 (Construction Requirment , base board) |
- |
|
|
|
| Cl. 5.3 (Endurance Test) |
- |
|
|
|
| Cl. 5.2 (Volumetric Efficiency) |
- |
|
|
|
| 5 & 5.1 (Performance requirement, Discharge rate) |
- |
|
|
|
| 4.8.2 (Cut-Off Device and , spray lance/ spray Gun) |
- |
|
|
|
| 4.8.2 (Nozzle) |
- |
|
|
|
|
- |
-
- |
| 13316 |
BIS, Central Laboratory (CL)
| None
| IS 17154 (2019) |
Battery operated motorized tricycle - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| (Cl. 8.5) (Test For Finish :) |
- |
|
|
|
| (Cl. 8.3) (Static Load Test :) |
- |
|
|
|
| (Cl. 8.2) (Manoeuverability :) |
- |
|
|
|
| (Cl. 8.1) (Raod Test :) |
- |
|
|
|
| (Cl 7) (FINISH : All the metallic parts other than those mentioned in Cl 6.1 shall have a smooth finish & shall be Zinc plated accordance with Grade No. 1 of IS 1573.) |
- |
|
|
|
| (Cl. 6.14) (Accessories : The following items shall be furnished as accessories:) |
- |
|
|
|
| (Cl. 6.14) (Accessories : The following items shall be furnished as accessories:) |
- |
|
|
|
| (Cl. 6.14) (Accessories : The following items shall be furnished as accessories:) |
- |
|
|
|
| (Cl. 6.14) (Accessories : The following items shall be furnished as accessories:) |
- |
|
|
|
| (Cl. 6.14) (Accessories : The following items shall be furnished as accessories:) |
- |
|
|
|
| (Cl. 6.14) (Accessories : The following items shall be furnished as accessories:) |
- |
|
|
|
| (Cl. 6.14) (Accessories : The following items shall be furnished as accessories:) |
- |
|
|
|
| (Cl. 6.13) (Suitable means shall be provided on the under side of the tricycle for keeping the crutches or walking stick securely and conveniently.) |
- |
|
|
|
| (Cl. 6.12) (Lubrication:) |
- |
|
|
|
| (Cl. 6.11) (Armrest :) |
- |
|
|
|
| (Cl. 6.11) (Armrest :) |
- |
|
|
|
| (Cl. 6.10) (A tool-cum-accessories box shall be provided behind the seat. ) |
- |
|
|
|
| (Cl. 6.9) (Rear Wheel Hub:) |
- |
|
|
|
| (Cl. 6.9) (Rear Wheel Hub:) |
- |
|
|
|
| (Cl. 6.8) (Front Wheel Hub:) |
- |
|
|
|
| (Cl. 6.7) (Brakes :) |
- |
|
|
|
| (Cl. 6.6) (Mudguards :) |
- |
|
|
|
| (Cl. 6.6) (Mudguards :) |
- |
|
|
|
| (Cl. 6.6) (Mudguards :) |
- |
|
|
|
| (Cl. 6.6) (Mudguards :) |
- |
|
|
|
| (Cl. 6.6) (Mudguards :) |
- |
|
|
|
| (Cl. 6.6) (Mudguards :) |
- |
|
|
|
| (Cl. 6.6) (Mudguards :) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims : ) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims : ) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims : ) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims : ) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims : ) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims : Spoke- holes shall be properly punched or drilled.) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims :The rims shall be free from pitting or uneven plating. ) |
- |
|
|
|
| (Cl. 6.5) (Wheel Rims :The wheel rims shall be size 24" for front wheel & 26" for rear wheel conforming to IS 624 : 2003.) |
- |
|
|
|
| (Cl. 6.4) (Tyres & Tubes: Tyres used shall be 24'' size for front wheel and 26" for rear wheels, tyres conforming to IS 2414 While tubes shall conform to IS 2415.) |
- |
|
|
|
| (Cl. 6.3) (Driving Mechanisum:) |
- |
|
|
|
| (Cl. 6.2) (Steering Handle Bar: ) |
- |
|
|
|
| (Cl. 6.2) (Steering Handle Bar: ) |
- |
|
|
|
| (Cl. 6.2) (Steering Handle Bar: ) |
- |
|
|
|
| (Cl.6.1) (Frame : ) |
- |
|
|
|
| (Cl.6.1) (Frame : ) |
- |
|
|
|
| (Cl.6.1) (Frame : ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Height of rear wheel supporting frame ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Back height from seat, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Seat width, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Seat length, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Armrest height from seat, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Clearance of footrest from ground, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Length of foot rest, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Width of foot rest, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Overall height, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Overall width, ) |
- |
|
|
|
| (Cl 4)Table 1 & Fig 1 (Overall length, ) |
- |
|
|
|
|
- |
-
- |
| 13317 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 9738 (2003) |
Polyethylene bags for general purposes - Specification (Second Revision) |
All type and thickness |
Rs. 1500/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2 (Classification) |
- |
|
|
|
| 5.0 (Structure & Shape) |
- |
|
|
|
| 7.2 (Length) |
- |
|
|
|
| 7.2,Table 6 (Width) |
- |
|
|
|
| 7.3 (Thickness) |
- |
|
|
|
| 8.1 (Appearance) |
- |
|
|
|
| 8.1.1 (Printing Bags) |
- |
|
|
|
| 8.2 (Water Leak Test) |
- |
|
|
|
| 8.3 (Printing Ink Adhesion Test) |
- |
|
|
|
| 8.4 (Drop Test) |
- |
|
|
|
| 10 (Packing and Marking) |
- |
|
|
|
| 6.0 (Material) |
- |
|
|
|
|
- |
-
Type, length, width and thickness to be declared. |
| 13318 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 2112 (2014) |
Silver and silver alloys, jewellery/ artefacts - Fineness and marking - Specification (Third Revision) |
upto 990 ppt |
Rs.1400.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 (Fineness) |
- |
|
|
|
| 5 (Cadmium) |
- |
|
|
|
| 5 (Lead) |
- |
|
|
|
|
- |
-
10 gm, min. |
| 13319 |
BIS, Patna Branch Laboratory (PBL)
| None
| IS 4984 (2016) |
Polyethylene pipes for water supply - Specification (Fifth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1.4 (PIPE DESCRIPTION) |
- |
|
|
|
| 6.1.3 (PIPE DESCRIPTION) |
- |
|
|
|
| 6, 6.1.2 (PIPE DESCRIPTION) |
- |
|
|
|
| 6, 6.1.1 (PIPE DESCRIPTION) |
- |
|
|
|
| 6, 6.1 (PIPE DESCRIPTION) |
- |
|
|
|
| 6.2.1 (6.1.1 Identification Stripes) |
- |
|
|
|
| 6.2 (Colour) |
- |
|
|
|
| 7.2 (Length) |
- |
|
|
|
| Cl-7.4 (Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported)) |
- |
|
|
|
| 7.4.1.2 (Ovality) |
- |
|
|
|
| 8.2 (Longitudinal Reversion Test) |
- |
|
|
|
| 8.6 (Overall migration) |
- |
|
|
|
| Cl 8.3 (Carbon Black Dispersion) |
- |
|
|
|
| 8.4 ( Melt Flow Rate) |
- |
|
|
|
| 8.7 (Density) |
- |
|
|
|
| Cl. 8.3 (Carbon Black Content) |
- |
|
|
|
| Clause 8.3 (Carbon Black content) |
- |
|
|
|
| 8.5 (Oxidation Induction Time) |
- |
|
|
|
|
- |
-
All test facilities are available as per the IS except-
i. Hydraulic Characteristics (Clause 8.4)
Note-Overall Migration test facility can be done only for Priority Samples (Clause 8.6) |
| 13320 |
BIS, Patna Branch Laboratory (PBL)
| None
| IS 10146 (1982) |
Specification for polyethylene for its safe use in contact with foodstuffs, pharmaceuticals and drinking water zy |
- |
300 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.3 (Pigments and Colourants ) |
- |
|
|
|
| 3.4 (Overall Migration) |
- |
|
|
|
|
- |
-
Test facility is available only for Overall Migration (Clause 3.4) |
