BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15600 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

13351

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

5850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Workmanship)	-	50	-
Cl 5 & 6(Diameter)	-	50	-
Cl 7(UTM)	-	1000	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	450	-
Clause 3.1.1(Sulphur)	-	250	-
Clause 3.1.1(Phosphorus)	-	250	-
Cl. 7.1(Elongation)	-	500	-
Cl. 7.1(Proof Stress 0.2 %)	-	500	-
Cl. 6.2(Length)	-	100	-
Clause 3(Nitrogen)	-	1400	-
Clause 7.1(Total Elongation over a gauge length of 8 D Where D is the dia of wire)	-	300	-
Clause 7.1(Ultimate Tensile Stress)	-	1000	-
Cl 4.1(Workmanship)	-	50	-
Cl 5 & 6(Diameter)	-	50	-
Cl 7(UTM)	-	1000	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	450	-
Clause 3.1.1(Sulphur)	-	250	-
Clause 3.1.1(Phosphorus)	-	250	-
Cl. 7.1(Elongation)	-	500	-
Cl. 7.1(Proof Stress 0.2 %)	-	500	-
Cl. 6.2(Length)	-	100	-
Clause 3(Nitrogen)	-	1400	-
Clause 7.1(Total Elongation over a gauge length of 8 D Where D is the dia of wire)	-	300	-
Clause 7.1(Ultimate Tensile Stress)	-	1000	-
Cl 4.1(Workmanship)	-	50	-
Cl 5 & 6(Diameter)	-	50	-
Cl 7(UTM)	-	1000	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	450	-
Clause 3.1.1(Sulphur)	-	250	-
Clause 3.1.1(Phosphorus)	-	250	-
Cl. 7.1(Elongation)	-	500	-
Cl. 7.1(Proof Stress 0.2 %)	-	500	-
Cl. 6.2(Length)	-	100	-
Clause 3(Nitrogen)	-	1400	-
Clause 7.1(Total Elongation over a gauge length of 8 D Where D is the dia of wire)	-	300	-
Clause 7.1(Ultimate Tensile Stress)	-	1000	-
Cl 4.1(Workmanship)	-	50	-
Cl 5 & 6(Diameter)	-	50	-
Cl 7(UTM)	-	1000	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	450	-
Clause 3.1.1(Sulphur)	-	250	-
Clause 3.1.1(Phosphorus)	-	250	-
Cl. 7.1(Elongation)	-	500	-
Cl. 7.1(Proof Stress 0.2 %)	-	500	-
Cl. 6.2(Length)	-	100	-
Clause 3(Nitrogen)	-	1400	-
Clause 7.1(Total Elongation over a gauge length of 8 D Where D is the dia of wire)	-	300	-
Clause 7.1(Ultimate Tensile Stress)	-	1000	-
Cl 4.1(Workmanship)	-	-	-
Cl 5 & 6(Diameter)	-	-	-
Cl 7(UTM)	-	-	-
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	-	-
Clause 3.1.1(Sulphur)	-	-	-
Clause 3.1.1(Phosphorus)	-	-	-
Cl. 7.1(Elongation)	-	-	-
Cl. 7.1(Proof Stress 0.2 %)	-	-	-
Cl. 6.2(Length)	-	-	-
Clause 3(Nitrogen)	-	-	-
Clause 7.1(Total Elongation over a gauge length of 8 D Where D is the dia of wire)	-	-	-
Clause 7.1(Ultimate Tensile Stress)	-	-	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13352

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

3150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Workmanship)	-	200	-
Cl 6.2(Diameter & Ovality)	-	200	-
Cl 6.2(Weight)	-	200	-
Cl 8.2(Bend test)	-	500	-
Cl 9.3(Press)	-	500	-
Cl 6.1(Diameter)	-	200	-
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	1500	-
Cl 8(Physical Requirements)	-	1500	-
Clause -4, 4.3(TITANIUM)	-	100	-
Clause -4, 4.2(VANADIUM)	-	100	-
Clause -4, 4.1(NIOBIUM)	-	100	-
Clause -4, 4.1(Molybdenum)	-	100	-
Clause -4, 4.1(Chromium)	-	100	-
Clause -4, 4.1(Nickel)	-	100	-
Clause -4, 4.1( ALUMINIUM)	-	100	-
Clause -4, 4.1(SILICON)	-	100	-
Clause -4, 4.1(NITROGEN)	-	1400	-
Clause -4, 4.1(MANGANESE)	-	100	-
Clause -4, 4.1(PHOSPHURS)	-	100	-
Clause -4, 4.1(SULPHUR)	-	100	-
Clause -4, 4.1( CARBON)	-	100	-
Cl. 8.1 Table 1(Elongation)	-	500	-
Clause 8.1(Yield Stress)	-	500	-
Clause 9.3(Bend test)	-	500	-
Clause 6.1(Size)	-	200	-
Cl 9.3(Press)	-	500	-
Cl 8(UTM)	-	1500	-
Clause 5.1(IS 432 Part 1)	-	100	-
Clause 6.2(IS 1732)	-	200	-
Clause 8.1(IS 1608 Part 1)	-	1500	-
Clause 4(Any Instrumental Method/Chemical Method)	-	1000	-
Clause 5.1(Freedom from Defect)	-	100	-
Clause 4(Boron)	-	100	-
Clause 4(Copper)	-	100	-
Cl 5.1(Workmanship)	-	200	-
Cl 6.2(Diameter & Ovality)	-	200	-
Cl 6.2(Weight)	-	200	-
Cl 8.2(Bend test)	-	500	-
Cl 9.3(Press)	-	500	-
Cl 6.1(Diameter)	-	200	-
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	1500	-
Cl 8(Physical Requirements)	-	1500	-
Cl. 8.1 Table 1(Elongation)	-	1500	-
Clause 8.1(Yield Stress)	-	1500	-
Clause 9.3(Bend test)	-	500	-
Clause 6.1(Size)	-	200	-
Cl 9.3(Press)	-	500	-
Cl 8(UTM)	-	1500	-
Clause 5.1(IS 432 Part 1)	-	100	-
Clause 6.2(IS 1732)	-	200	-
Clause 8.1(IS 1608 Part 1)	-	1500	-
Clause 4(Any Instrumental Method/Chemical Method)	-	100	-
Clause 5.1(Freedom from Defect)	-	100	-
Clause 4(Boron)	-	100	-
Clause 4(Copper)	-	100	-
Cl 5.1(Workmanship)	-	200	-
Cl 6.2(Diameter & Ovality)	-	200	-
Cl 6.2(Weight)	-	200	-
Cl 8.2(Bend test)	-	500	-
Cl 9.3(Press)	-	500	-
Cl 6.1(Diameter)	-	200	-
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	1500	-
Cl 8(Physical Requirements)	-	1500	-
Cl. 8.1 Table 1(Elongation)	-	500	-
Clause 8.1(Yield Stress)	-	500	-
Clause 9.3(Bend test)	-	500	-
Clause 6.1(Size)	-	200	-
Cl 9.3(Press)	-	500	-
Cl 8(UTM)	-	1500	-
Clause 5.1(IS 432 Part 1)	-	200	-
Clause 6.2(IS 1732)	-	200	-
Clause 8.1(IS 1608 Part 1)	-	1500	-
Clause 4(Any Instrumental Method/Chemical Method)	-	1000	-
Clause 5.1(Freedom from Defect)	-	200	-
Clause 4(Boron)	-	100	-
Clause 4(Copper)	-	100	-

31 Dec, 2029

-
-

13353

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

7800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	200	BIS 10 % discount
Cl 9(Tensile Test On UTM)	-	1500	BIS 10 % discount
Cl 11(Workmanship)	-	100	BIS 10 % discount
Cl 13(Workmanship)	-	100	BIS 10 % discount
6 AND AS PER IS 7887(MICRO ALLOY)	-	500	BIS 10 % discount
6 AND AS PER IS 7887(ALUMINIUM)	-	200	BIS 10 % discount
6 AND AS PER IS 7887(PHOSPHORUS)	-	100	BIS 10 % discount
6 AND AS PER IS 7887(SULPHUR)	-	200	BIS 10 % discount
6 AND AS PER IS 7887(MANGANESE)	-	200	BIS 10 % discount
6 AND AS PER IS 7887(SILICON)	-	200	BIS 10 % discount
6 AND AS PER IS 7887(CARBON)	-	200	BIS 10 % discount
7 & 8(Ovality)	-	500	BIS 10 % discount
7 & 8(Diameter)	-	200	BIS 10 % discount
9.2(Wrapping Test)	-	1000	BIS 10 % discount
9.3(Bend test)	-	1000	BIS 10 % discount
10(Finish)	-	200	BIS 10 % discount
11(Coating test)	-	1000	BIS 10 % discount
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	100	BIS 10 % discount
Clause 6 and Note 3 of IS 7887(Copper)	-	200	BIS 10 % discount
Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters)	-	200	BIS 10 % discount
Cl 9(Tensile Test On UTM)	-	1500	BIS 10 % discount
Cl 11(Workmanship)	-	1000	BIS 10 % discount
Cl 13(Workmanship)	-	100	BIS 10 % discount
9.3(Bend test)	-	1000	BIS 10 % discount
10(Finish)	-	200	BIS 10 % discount
11(Coating test)	-	1000	BIS 10 % discount
Clause 6 and Note 3 of IS 7887(Any Instrumental Method/Chemical Method)	-	300	BIS 10 % discount
Clause 6 and Note 3 of IS 7887(Copper)	-	200	BIS 10 % discount

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13354

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	200	-
7.0(Dimension and Tolerances)	-	300	-
8.1 Table 1(Cu)	-	200	-
8.1 Table 1(Pb)	-	200	-
8.1 Table 1(Fe)	-	200	-
8.1 Table 1(Total other impurities excluding iron)	-	200	-
8.1 Table 1(Zn)	-	200	-
9.1 Table-2(Tensile Strength)	-	1000	-
9.1 Table-2(Elongation)	-	500	-
9.2(Vickers Hardness)	-	1000	-
10.1(Mercurous Nitrate Test)	-	1000	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13355

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 318 (1981)

Specification for leaded tin bronze ingots and castings (Second Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(SIZE AND SHAPE)	-	1000	-
6(FREEDOM FROM DEFECTS)	-	500	-
4, Table 2.(MECHANICAL PROPERTIES)	-	1000	-
3, Table 1.(CHEMlCAL COMPOSITION)	-	1000	-
7.2(Dimension)	-	500	-
7.1(Mass)	-	500	-
6.2(Freedom from defects-Castings)	-	500	-
6.1(Freedom from defects-Ingots)	-	500	-
4.1, Table 2(Elongation)	-	500	-
4.1, Table 2(0.2% Proof stress)	-	1000	-
4.1, Table 2(Tensile strength)	-	1000	-
7(SIZE AND SHAPE)	-	1000	-
6(FREEDOM FROM DEFECTS)	-	500	-
4, Table 2.(MECHANICAL PROPERTIES)	-	1000	-
3, Table 1.(CHEMlCAL COMPOSITION)	-	1000	-
7.2(Dimension)	-	500	-
7.1(Mass)	-	500	-
6.2(Freedom from defects-Castings)	-	500	-
6.1(Freedom from defects-Ingots)	-	500	-
4.1, Table 2(Elongation)	-	500	-
4.1, Table 2(0.2% Proof stress)	-	1000	-
4.1, Table 2(Tensile strength)	-	1000	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13356

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 17293 (2020)

Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c.

Electric Cables for Photovoltaic Systems for Rated Volt

1186450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	1000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	750	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	1200	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	55000	-
IS 191 : 2007, IS 440(Copper purity test)	-	3000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	150000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	250	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	7500	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	35000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	250	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	3750	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	3500	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	6000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	3500	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	7500	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	4000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	500	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	750000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	75000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	7500	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	7500	-
Annex - B of IS 17293:2020(Compatibility test)	-	1500	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	7000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	2500	10 % Discount to BIS
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	1	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	750	10 % Discount to BIS
Annex - E of IS 17293 : 2020(UV resistance)	-	35000	10 % Discount to BIS
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Annex - E of IS 17293 : 2020(UV resistance)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Annex - E of IS 17293 : 2020(UV resistance)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Annex - E of IS 17293 : 2020(UV resistance)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Annex - E of IS 17293 : 2020(UV resistance)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	5000	-
11.2.5(Surface Resistance of Sheath)	-	5000	-
11.3.1(Sheath Colour)	-	500	-
11.3.2(Sheath Marking)	-	500	-
11.3.3(Overall Diameters and Ovality)	-	1000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Annex - E of IS 17293 : 2020(UV resistance)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	0	-
11.2.5(Surface Resistance of Sheath)	-	0	-
11.3.1(Sheath Colour)	-	0	-
11.3.2(Sheath Marking)	-	0	-
11.3.3(Overall Diameters and Ovality)	-	0	-

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

13357

National Test House (NR) - NTH, Ghaziabad

8101304

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

20000 View breakup
Rs.20000/- for non-mining single core cable, Rs.22500 for mining single core cable and Rs.2500 for each extra core.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2(MATERIALS : ARMGURING)	-	500	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	300	-
16.5(Oxygen Index Test)	-	300	-
16.1(Temperature Index)	-	300	-
16.9(Test for Halogen Acid Gas Evolution)	-	200	-
13.6 a)(ARMOURING: Tensile Strength)	-	100	-
3.1(MATERIALS : CONDUCTOR)	-	100	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	200	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	200	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	200	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	100	-
6.1(MATERIALS : ARMGURING)	-	100	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	0	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	0	-
8.1(CONSTRUCTION : CONDUCTOR)	-	100	-
8.2(CONSTRUCTION : CONDUCTOR)	-	100	-
9.1(INSULATION )	-	100	-
9.2(INSULATION : Thickness of Insulation)	-	200	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	100	-
9.4(INSULATION : Application of Insulation)	-	100	-
10.1(CORE IDENTIFICATION)	-	100	-
10.2(CORE IDENTIFICATION)	-	0	-
10.3(CORE IDENTIFICATION)	-	0	-
10.3.1(Arrangement of Marking)	-	100	-
11.1(LAYING UP OF CORES)	-	100	-
11.2(LAYING UP OF CORES)	-	0	-
12.1(INNER SHEATH)	-	100	-
12.2(INNER SHEATH)	-	0	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	300	-
13.1.1(ARMOURING : Application)	-	200	-
13.1.2(Armouring: Coverage )	-	200	-
13.1.3(ARMOURING : Direction of lay )	-	200	-
13.1.4(ARMOURING : Application)	-	0	-
13.2(ARMOURING : Type of Armour)	-	200	-
13.2.1(ARMOURING : Type of Armour)	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	200	-
13.3(Armouring : Dimensions -Formed wire )	-	200	-
13.4(ARMOURING : Joints)	-	200	-
13.5.1(ARMOURING : Resistance)	-	500	-
13.5.2(ARMOURING : Resistance)	-	500	-
13.6 b)(ARMOURING: Elongation )	-	100	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	100	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	100	-
13.6 g)(ARMOURING: Resistivity)	-	200	-
14.1(OUTER SHEATH)	-	100	-
14.2(OUTER SHEATH)	-	0	-
14.3(OUTER SHEATH : Colour )	-	100	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	300	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	100	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	500	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	500	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	500	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	100	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	100	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	100	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	200	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	200	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	200	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	200	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	200	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	200	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	200	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	100	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	500	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	200	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	500	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	200	-
15.1 d)4)(Hot deformation : Insulation )	-	200	-
15.1 d)4)(Hot deformation : Sheath )	-	200	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	200	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	200	-
15.1 d)6)(Heat shock test- Insulation )	-	200	-
15.1 d)6)(Heat shock test- sheath )	-	200	-
15.1 d)7)(Thermal stability- insulation )	-	200	-
15.1 d)7)(Thermal stability- Sheath )	-	200	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	0	-
15.1 e)(Insulation resistance test : IR Constant )	-	0	-
15.1 f)(High voltage test ( water immersion test ))	-	0	-
15.1 g)(High voltage test at room temperature)	-	500	-
15.1 g)(High voltage test at room temperature)	-	0	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	500	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	500	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	500	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	500	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	500	-
16.1(DETAILS OF TESTS : General)	-	0	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	0	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	1000	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	1000	-
16.4(Flammability Test)	-	200	-
16.6(Flame Retardance Test on Single Cables)	-	100	-
16.7(Flame Retardance Test on Bunched Cables)	-	100	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	100	-
17.2(IDENTIFICATION : Cable Identification)	-	100	-
17.2.1(IDENTIFICATION : Cable Identification)	-	0	-
17.3(IDENTIFICATION : Cable Code)	-	100	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	500	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	500	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	200	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	200	-
16.4(Flammability Test- Un affected portion)	-	100	-
16.4(Flammability Test- Period of Burning)	-	100	-
9.3(Minimum Thickness of Reduce core insulation)	-	100	-
9.2(Thickness of Reduce core insulation)	-	100	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	100	-
Cl No. 16.10(Smoke density test)	-	200	-
Cl No. 16.8(Test for specific optical density of smoke)	-	200	-
Table 4(Copper purity test)	-	200	-

26 Oct, 2028

-
-

13358

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

Specification for Thermosetting Insulated Fire Survival

145000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	500	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	250	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	450	-
IS 191:2007 & IS 440(Copper purity test)	-	3000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	350	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	350	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	250	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	750	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	750	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	3000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	1200	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3500	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	4500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	1500	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	3500	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	350	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	1500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	250	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	55000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1250	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	750	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	3000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	7500	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	7500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	0	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	450	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1200	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	750	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	2000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1250	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	5500	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	35000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	45000	Resistance to fire alone (Symbol F) - Rs.15,000/-, • Resistance to fire and water (Symbol W) - Rs.15000/-, • Resistance to fire and mechanical shock (Symbol S) - Rs.15000/-, • Resistance to fire with direct mechanical impact and water jet
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
IS 191:2007 & IS 440(Copper purity test)	-	0	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	0	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	0	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	0	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	0	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	0	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	0	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	0	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
IS 191:2007 & IS 440(Copper purity test)	-	0	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	0	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	0	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	0	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	0	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	0	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	0	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	0	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	0	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	0	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
IS 191:2007 & IS 440(Copper purity test)	-	0	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	0	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	0	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	0	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	0	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	0	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	0	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	0	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	0	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	0	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	0	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	2000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	10000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	5000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	1500	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
IS 191:2007 & IS 440(Copper purity test)	-	0	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	0	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	0	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	0	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	0	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	0	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	0	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	0	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	0	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	0	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	0	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	0	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	0	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	0	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	0	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	0	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	0	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	0	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	0	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	0	-

11 Apr, 2028

-
Included w.e.f. 08-08-2022.

13359

National Forensic Sciences University (NFSU), Gandhinagar

7170534

IS 17051 (2018)

Textiles - Bullet resistant jackets - Performance requirements

800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.6(X-Ray of HAP)	-	0	Yet to decide the testing charges
6.1(Threat levels)	-	16500	Rs. 16500 + 18% GST for single HAP/SAP (06 Shots)
6.2(Behind Armour Blunt Trauma (BFS limit))	-	16500	Rs. 16500 + 18% GST for single HAP/SAP (06 Shots) Rs. 7500 + 18 % GST for Groin/Side Plate/Throat
6.5(Ballistic Limit (optional))	-	2500	Rs. 2500+ 18% GST for single shot
6.6(Shelf Life of SAP and HAP ballistic panels)	-	16500	Rs 16500 + 18% GST for SAP Tumbling Rs 10000 + 18% GST for HAP Conditioning Rs 7500 + 18% GST for Side Plate conditioning Rs 10000 + 18% GST for Groin Tumbling
8.1(Extreme Temperatures (optional))	-	10000	Rs 10000 + 18% GST per complete jacket
8.2(Fluid Exposure (optional))	-	0	-
8.3(In Transit Conditions (for HAP))	-	0	-
8.2.1(Water resistance)	-	0	-

-
Excluding 8.2(Fluid Exposure (optional)) 8.3(In Transit Conditions (for HAP)) 8.2.1(Water resistance)

13360

MATERIAL TESTING LABORATORY LLP

8176306

IS 4759 (1996)

Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)

All grades

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table 1, 9.2, 9.2.1 ,9.2.2(Msaa of Zinc Coating - IS 4759 IS 6745 IS 3203 IS 6012 )	-	1500	-
9.3(Uniformity of Zinc Coating - IS 4759 IS 2633 )	-	500	-
9.4(Adhesion of Galvanizing coating - IS 2629 )	-	500	-
6.2 & 6.4(Freedom from Defects - IS 4759)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Zinc -IS 2600)	-	500	Raw Material Zinc testing Charge-4000/-
4.1 & Table-1 of IS 209/IS 13229(Lead -IS 2600)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Cadmium -IS 2600)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Iron -IS 2600)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Tin -IS 2600)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Copper -IS 2600)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Thallium -IS 2600)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Indium -IS 2600)	-	500	-
4.1 & Table-1 of IS 209/IS 13229(Total Impurities -IS 2600)	-	0	-
10(Marking)	-	250	-
6.3(Steel Embrittlement -IS:6158-1984)	-	750	-

18 Feb, 2027

-
-

13361

MATERIAL TESTING LABORATORY LLP

8176306

IS 1264 (1997)

Brass gravity die castings - Specification (Fourth Revision)

All grades

2150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	100	-
6.0(Shape)	-	100	-
7.0(Cu)	-	200	-
7.0(Sn)	-	200	-
7.0(Pb)	-	200	-
7.0(Ni)	-	200	-
7.0(Fe)	-	200	-
7.0(Al)	-	200	-
7.0(Mn)	-	200	-
7.0(Si)	-	200	-
7.0(Total impurities excluding Ni Pb Al Zn)	-	200	-
9.0(Pressure test)	-	250	-
11(Marking)	-	100	-
6.0(Size)	-	100	-
6.0(Mass)	-	100	-

18 Feb, 2027

-
-

13362

MATERIAL TESTING LABORATORY LLP

8176306

IS 407 (1981)

Specification for brass tubes for general purposes (Third Revision)

All Grades

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6/6.1(FREEDOM FROM DEFECTS)	-	250	-
7/7.1 & 7.1.1(CONDITION)	-	250	-
8/8.1 & 8.2(SIZES AND TOLERANCES-Mean Outside Dia)	-	250	-
8/8.1 & 8.2(SIZES AND TOLERANCES-Mean Wall thickness)	-	250	-
8/8.1 & 8.2(SIZES AND TOLERANCES-Length)	-	250	-
9/9.1/Appendix A(PRESSURE TESTS-Hydraulic Test)	-	1000	-
9/9.2(PRESSURE TESTS-Pneumatic Test)	-	1000	-
10/10.1-Table 2(PHYSICAL TEST- Hardness (HV)-IS : 1501 (Part 1))	-	500	-
10/10.2-Table 2(PHYSICAL TEST- Tensilt Test - IS : 2655)	-	500	-
10/10.3(PHYSICAL TEST- Drifting Test- (For tubes upto and Including 100 mm nom OD))	-	1000	-
10/10.4 (10.4.1)("PHYSICAL TEST-Flattening Test (For Tubes ≤ 2.5 mm Wall Thickness and not Exceeding 100 mm Outside Diameter)")	-	500	-
10/10.4 (10.4.2)(PHYSICAL TEST-Flattening Test (For Tubes ≥ 2.5 mm Wall Thickness and More Than 100 mm Outside Diameter))	-	500	-
10/10.5(PHYSICAL TEST- Double Bend TestDouble Bend Test ( For Round Tubes ≤ 2.5 mm Wall Thickness and Over 100 mm Outside Diameter ))	-	500	-
10/10.6(PHYSICAL TEST- Mercurous Nitrate Test- IS : 2305)	-	1500	-
11/11.1(MARKING)	-	250	-
5(Chemical Composition - IS 3685)	-	3000	-

18 Feb, 2027

-
Scope Restricted to Tubes of wall thickness upto 10 mm

13363

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 15500 : PART 6 (2021)

Deepwell Handpumps, Components and Secial Tools — Specification Part 6 Handpumps

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Fig. 6.1 (Brass Liner)	-
Fig. 6.2 ("Plunger Yoka Body (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.3 (Upper Valve (for SDWP, EDWP, VLOM 65 and FLP))	-
Fig. 6.4 (" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.4 (" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.4 (" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.4 (" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.4 (" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.4 (" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.4 (" Bucket Spacer-Standard (for SDWP, EDWP, VLOM 65 and FLP)")	-
Fig. 6.5 ("Bucket Spacer-Lower (for EDWP)")	-
Fig. 6.5 ("Bucket Spacer-Lower (for EDWP)")	-
Fig. 6.5 ("Bucket Spacer-Lower (for EDWP)")	-
Fig. 6.5 ("Bucket Spacer-Lower (for EDWP)")	-
Fig. 6.5 ("Bucket Spacer-Lower (for EDWP)")	-
Fig. 6.6 (Follower (SDWP and FLP))	-
Fig. 6.7 (Follower-EDW)	-
Fig. 6.11 ("Rubber Seat Retainer (for SDWP, EDWP & FLP)")	-
Fig. 6.12 ("Check Valve Seat-Standard (for SDWP & EDWP)")	-
Fig. 6.13 (Check Valve Seat-VLOM 65)	-
Fig. 6.13 (Check Valve Seat-VLOM 65)	-

-
Excluding Clause 2.2 (Construction).

13364

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 15500 : PART 5 (2021)

Deepwell Handpumps, Components and Secial Tools — Specification Part 5 Handpumps

1800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Fig. 5.1 (Cylinder Body-Standard (for SDWP and FLP))	-
Fig. 5.1 (Cylinder Body-Standard (for SDWP and FLP))	-
Fig. 5.2 (Cylinder Body-Long (for EDWP and VLOM 65))	-
Fig. 5.2 (Cylinder Body-Long (for EDWP and VLOM 65))	-
Fig. 5.3 (Cylinder Body-VLOM 50)	-
Fig. 5.3 (Cylinder Body-VLOM 50)	-
Fig. 5.4 ("Reducer Cap (for SDWP, EDWP and FLP)")	-
Fig. 5.4 ("Reducer Cap (for SDWP, EDWP and FLP)")	-
Fig. 5.5 B ("Cylinder Caps-VLOM 65 (for SDWP and EDWP)")	-
Fig. 5.6 A (Cylinder Caps-VLOM 50)	-
Fig. 5.6 B (Cylinder Caps-VLOM 50)	-

-
Excluding Clause 2.2 (construction), Clause 2.3 (Construction).

13365

Allumera Engineering Solutions Pvt ltd

8175206

IS 16714 (2018)

Ground granulated blast furnace slag for use in cement, mortar and concrete - Specification

all

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 and Table 2 i(Fineness IS 4031 (Part 2))	-	1000	-
6 and Table 2 ii a(Slag activity index -7 days)	-	1350	-
6 and Table 2 ii b(Slag activity index -28 days)	-	1500	-
Clause 5.1(Manganese oxide (MnO))	-	950	-
Clause 5.1(Magnesium oxide (MgO))	-	950	-
Clause 5.1(Sulphide sulphur (S))	-	950	-
Clause 5.1(Sulphate (as SO3),)	-	700	-
Clause 5.1(Insoluble residue)	-	750	-
Clause 5.1(Chloride content)	-	750	-
Clause 5.1(Loss on ignition)	-	750	-
Clause 5.1((CaO+MgO+1/3AlO3)/( SiO2 +2/3 AlO3))	-	1350	-
Clause 5.1((CaO+MgO+Al2O3)/ SiO2)	-	1350	-
Clause 5.1((CaO+CaS+1/2 MgO+Al2O3)/ (SiO2+ MnO))	-	1000	-

13 Dec, 2029

-
-

13366

Allumera Engineering Solutions Pvt ltd

8175206

IS 455 (2015)

Portland slag cement - Specification

PSC

19750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	2000	-
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	2000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	1600	-
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	2000	-
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	1650	-
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	1250	-
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2500	-
7 Table 1 i(Fineness IS 4031(Part 2))	-	1000	-
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	1000	-
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	1600	-
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	550	-
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	550	-
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	1450	-
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	1650	-
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	1850	-
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	3500	-
11.3(Consistency(IS:4031(Pt-4)-1988)	-	600	-

13 Dec, 2029

-
Exclusion: Cl.7 Table-2 (v) (Transverse Strength)

13367

Allumera Engineering Solutions Pvt ltd

8175206

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

Portland Pozzolana Cement- Fly Ash Based

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	1750	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1600	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	1500	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	1500	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1500	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1650	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1700	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	3500	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	3500	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1200	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	2000	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1500	-
11(MARKING)	-	500	-

13 Dec, 2029

-
Exclusion: Cl.7 Table-2 (v) (Transverse Strength)

13368

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Type A/Type B)	-	100	-
5 Table-1(Sizes Diameter of Line wire)	-	100	-
5 Table-1(Sizes Diamater of Point wire)	-	100	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	100	-
5 Table-1(Sizes Distance between two barbs)	-	100	-
7.1(Manufacture)	-	50	-
7.2(Manufacture)	-	50	-
7.3(Manufacture)	-	50	-
8(CHROMATING)	-	200	-
9.1(Freedom from defects)	-	50	-
9.2(Freedom from defects)	-	100	-
12.1(Tensile Strength)	-	450	-
12.1(Breaking load)	-	450	-
12.2.1(Mass of zinc coating (line wire))	-	300	-
12.2.2(Mass of zinc coating (point wire))	-	200	-
12.2(Uniformity of zinc coating)	-	100	-
12.3(Ductility)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.2(Cut Angle)	-	100	-
Cl. 7.2(Length of Barbs)	-	100	-
Cl. 7.2(Finishing of Barbs)	-	100	-
Cl. 7.1(General)	-	100	-
4(Type A/Type B)	-	100	-
5 Table-1(Sizes Diameter of Line wire)	-	100	-
5 Table-1(Sizes Diamater of Point wire)	-	100	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	100	-
5 Table-1(Sizes Distance between two barbs)	-	100	-
7.1(Manufacture)	-	50	-
7.2(Manufacture)	-	50	-
7.3(Manufacture)	-	50	-
8(CHROMATING)	-	200	-
9.1(Freedom from defects)	-	50	-
9.2(Freedom from defects)	-	100	-
12.1(Tensile Strength)	-	450	-
12.1(Breaking load)	-	450	-
12.2.1(Mass of zinc coating (line wire))	-	300	-
12.2.2(Mass of zinc coating (point wire))	-	200	-
12.2(Uniformity of zinc coating)	-	100	-
12.3(Ductility)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.2(Cut Angle)	-	100	-
Cl. 7.2(Length of Barbs)	-	100	-
Cl. 7.2(Finishing of Barbs)	-	100	-
Cl. 7.1(General)	-	100	-
4(Type A/Type B)	-	100	-
5 Table-1(Sizes Diameter of Line wire)	-	100	-
5 Table-1(Sizes Diamater of Point wire)	-	100	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	100	-
5 Table-1(Sizes Distance between two barbs)	-	100	-
7.1(Manufacture)	-	50	-
7.2(Manufacture)	-	50	-
7.3(Manufacture)	-	50	-
8(CHROMATING)	-	200	-
9.1(Freedom from defects)	-	100	-
9.2(Freedom from defects)	-	500	-
12.1(Tensile Strength)	-	450	-
12.1(Breaking load)	-	450	-
12.2.1(Mass of zinc coating (line wire))	-	300	-
12.2.2(Mass of zinc coating (point wire))	-	200	-
12.2(Uniformity of zinc coating)	-	100	-
12.3(Ductility)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.2(Cut Angle)	-	50	-
Cl. 7.2(Length of Barbs)	-	50	-
Cl. 7.2(Finishing of Barbs)	-	50	-
Cl. 7.1(General)	-	50	-
4(Type A/Type B)	-	-	-
5 Table-1(Sizes Diameter of Line wire)	-	-	-
5 Table-1(Sizes Diamater of Point wire)	-	-	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	-	-
5 Table-1(Sizes Distance between two barbs)	-	-	-
7.1(Manufacture)	-	-	-
7.2(Manufacture)	-	-	-
7.3(Manufacture)	-	-	-
8(CHROMATING)	-	-	-
9.1(Freedom from defects)	-	-	-
9.2(Freedom from defects)	-	-	-
12.1(Tensile Strength)	-	-	-
12.1(Breaking load)	-	-	-
12.2.1(Mass of zinc coating (line wire))	-	-	-
12.2.2(Mass of zinc coating (point wire))	-	-	-
12.2(Uniformity of zinc coating)	-	-	-
12.3(Ductility)	-	-	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl. 7.2(Cut Angle)	-	-	-
Cl. 7.2(Length of Barbs)	-	-	-
Cl. 7.2(Finishing of Barbs)	-	-	-
Cl. 7.1(General)	-	-	-

31 Dec, 2029

-
-

13369

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP), Azadpur

8131406

IS 4199 (2001)

Toilet soap, liquid - Specification (Third Revision)

5300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1(Description)	-	500	5300/-
Cl.4.3(Sedimentation)	-	800	5300/-
Cl.4.5.1(Phenolic substances such as cresylic acid, if added)	-	800	5300/-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.i)(Total fatty matter)	-	800	5300/-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.ii)(Matter insoluble in alcohol)	-	800	5300/-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.iii)(Free caustic Alkali, as K2O)	-	800	5300/-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.iv)(Synthetic detergent)	-	800	5300/-

17 Jun, 2027

-
Included w.e.f.13-05-2022 Exclusion: Cl 4.7.2.2 (Dermatological Safety(Requirement for ECO MARK)) Cl 4.7.2.1 (Phosphate (Requirement for ECO MARK)) Cl 4.7.2.1 (Synthetic detergent (Requirement for ECO MARK))

13370

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP), Azadpur

8131406

IS 2888 (2004)

Toilet soap - Specification (Third Revision)

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Phenolic substances, IS 286)	-	800	6900/-
5.5, Table-1 (ii), Grade-1, Gr-2 & Gr-3(Rosin acids, percent by mass of total fatty matter, IS 286 )	-	800	800/-
5.5, Table-1 (iii), Grade-1, Gr-2 & Gr-3(Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-	800	800/-
5.5, Table-1 (iv), Grade-2 & Grade-3(Matter insoluble in alcohol, IS 286)	-	800	800/-
5.5, Table-1 (v), Grade-1, Grade-2 & Grade-3(Chloride (as sodium chloride), IS 286)	-	800	800/-
5.5, Table-1 (vi), Grade-1, Grade-2 & Grade-3(Free carbonated alkali)	-	800	800/-
5.5, Table-1 (vii), Grade-3(Lather)	-	800	800/-
5.5, Table-1 (vii), Grade-2(Lather)	-	800	800/-
5.5, Table-1 (vii), Grade-1(Lather)	-	800	800/-

17 Jun, 2027

-
Included w.e.f.13-05-2022 Exclusion: Cl 5.3 Ingredients (Phenolic substances)

13371

Allumera Engineering Solutions Pvt ltd

8175206

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

pozzolonic use in cement nortar & concrete

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	2000	-
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	2000	-
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	2500	-
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	1500	-
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	750	-
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	1550	-
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	1000	-
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	750	-
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	450	-
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	1000	-
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	550	-
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	1750	-
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	1750	-
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	2000	-
7.2(Uniformity Requirements)	-	1500	-

13 Dec, 2029

-
-

13372

Allumera Engineering Solutions Pvt ltd

8175206

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

Coarse and fine aggregate/maufactured aggr for concrete

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	1500	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	1500	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	1250	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	1000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	2650	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	2500	-
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1500	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1500	-
5.4.2(a)( Aggregates Impact Value)	-	1000	-
5.4.2(b)( Aggregates Impact Value)	-	1000	-
5.4.3(a)( Aggregate Abrasion Value)	-	1500	-
5.4.3(b)( Aggregate Abrasion Value)	-	1750	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	3500	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	3500	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	2500	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	1500	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	1500	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	1500	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	1500	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	2650	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	3000	-
5.7 table 4 (Calcium oxide)	-	1500	-

13 Dec, 2029

-
-

13373

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1538 (1993)

Cast iron fittings for pressure pipes for water, gas and sewage - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(The metal used for the manufacture of pipe shall be of a quality not less than that specified for grade FG 150 of IS 210 )	-	500	-
5.1(tensile strength)	-	1500	-
6.1(Brinell hardness tests)	-	500	-
8(Hydrostatic Test)	-	950	-
9.1,Table 2 & 3(DI)	-	50	-
9.1,Table 2 & 3(P)	-	50	-
9.1,Table 2 & 3(g)	-	50	-
9.1,Table 2 & 3(h)	-	50	-
9.1,Table 2 & 3(K)	-	50	-
9.1,Table 2 & 3(L)	-	50	-
9.1,Table 2 & 3(M)	-	50	-
9.1,Table 2 & 3(N)	-	50	-
9.1,Table 2 & 3(f)	-	50	-
9.1,Table 4(D)	-	50	-
9.1,Table 4(a)	-	50	-
9.1,Table 4(b)	-	50	-
9.1,Table 4(s)	-	50	-
9.1,Table 4(r)	-	50	-
9.1,Table 5(D)	-	50	-
9.1,Table 5(g)	-	50	-
9.1,Table 5(a)	-	50	-
9.1,Table 5(b)	-	50	-
9.1,Table 5(c)	-	50	-
9.1,Table 5(f)	-	50	-
9.1,Table 5(s)	-	50	-
9.1,Table 5(C)	-	50	-
9.1,Table 5(Holes No)	-	50	-
9.1,Table 5(Holes diameter)	-	50	-
9.1,Table 5(Diameterof Bolts)	-	50	-
9.1,Table 6(D)	-	50	-
9.1,Table 6(C)	-	50	-
9.1,Table 6(Holes No)	-	50	-
9.1,Table 6(Holes diameter)	-	50	-
9.1,Table 6(Diameterof Bolts)	-	50	-
9.1&11.1,Table 7,8&9(e)	-	50	-
9.1&11.1,Table 7,8&9(l)	-	50	-
9.1&11.1,Table 7,8&9(Mass (Approx))	-	50	-
9.1&11.1,Table 10 to13(e)	-	50	-
9.1&11.1,Table 10 to13(r)	-	50	-
9.1&11.1,Table 10 to13(a)	-	50	-
9.1&11.1,Table 10 to13(b)	-	50	-
9.1&11.1,Table 10 to13(Mass (Approx))	-	50	-
9.1&11.1,Table 14(Nominal Diameter)	-	50	-
9.1&11.1,Table 14(e)	-	50	-
9.1&11.1,Table 14(e1)	-	50	-
9.1&11.1,Table 14(l)	-	50	-
9.1&11.1,Table 14(h)	-	50	-
9.1&11.1,Table 14(Mass (Approx))	-	50	-
9.1&11.1,Table 15(e)	-	50	-
9.1&11.1,Table 15(l)	-	50	-
9.1&11.1,Table 15(Nominal Diameter)	-	50	-
9.1&11.1,Table 15(e1)	-	50	-
9.1&11.1,Table 15(k)	-	50	-
9.1&11.1,Table 15(Mass (Approx))	-	50	-
9.1&11.1,Table 16(e)	-	50	-
9.1&11.1,Table 16(l)	-	50	-
9.1&11.1,Table 16(h)	-	50	-
9.1&11.1,Table 16(Mass (Approx))	-	50	-
9.1&11.1,Table 17(e1)	-	50	-
9.1&11.1,Table 17(l1)	-	50	-
9.1&11.1,Table 17(Nominal Diameter)	-	50	-
9.1&11.1,Table 17(e2)	-	50	-
9.1&11.1,Table 17(l2)	-	50	-
9.1&11.1,Table 17(l3)	-	50	-
9.1&11.1,Table 17(l)	-	50	-
9.1&11.1,Table 17(Mass)	-	50	-
9.1&11.1,Table 18(a)	-	50	-
9.1&11.1,Table 18(P)	-	50	-
9.1&11.1,Table 18(Mass (Approx))	-	50	-
9.1&11.1,Table 19(DC)	-	50	-
9.1&11.1,Table 19(e)	-	50	-
9.1&11.1,Table 19(a)	-	50	-
9.1&11.1,Table 19(l)	-	50	-
9.1&11.1,Table 19(Mass (Approx))	-	50	-
9.1&11.1,Table 20(DI)	-	50	-
9.1&11.1,Table 20(h)	-	50	-
9.1&11.1,Table 20(Mass (Approx))	-	50	-
9.1&11.1,Table 21(e)	-	50	-
9.1&11.1,Table 21(r)	-	50	-
9.1&11.1,Table 21(a)	-	50	-
9.1&11.1,Table 21(b)	-	50	-
9.1&11.1,Table 21(Mass (Approx))	-	50	-
9.1&11.1,Table 22(e)	-	50	-
9.1&11.1,Table 22(r)	-	50	-
9.1&11.1,Table 22(a)	-	50	-
9.1&11.1,Table 22(b)	-	50	-
9.1&11.1,Table 22(c)	-	50	-
9.1&11.1,Table 22(a)	-	50	-
9.1&11.1,Table 22(f)	-	50	-
9.1&11.1,Table 22(g)	-	50	-
9.1&11.1,Table 23(e)	-	50	-
9.1&11.1,Table 23(r)	-	50	-
9.1&11.1,Table 23(a)	-	50	-
9.1&11.1,Table 23(l)	-	50	-
9.1&11.1,Table 23(Mass (Approx))	-	50	-
9.1&11.1,Table 24(e)	-	50	-
9.1&11.1,Table 24(l)	-	50	-
9.1&11.1,Table 24(Nominal Diameter)	-	50	-
9.1&11.1,Table 24(e1)	-	50	-
9.1&11.1,Table 24(h)	-	50	-
9.1&11.1,Table 24(Mass (Approx))	-	50	-
9.1&11.1,Table 25(e)	-	50	-
9.1&11.1,Table 25(l)	-	50	-
9.1&11.1,Table 25(h)	-	50	-
9.1&11.1,Table 25(Mass (Approx))	-	50	-
9.1&11.1,Table 26(e1)	-	50	-
9.1&11.1,Table 26(h1)	-	50	-
9.1&11.1,Table 26(Nominal Diameter)	-	50	-
9.1&11.1,Table 26(e2)	-	50	-
9.1&11.1,Table 26(l2)	-	50	-
9.1&11.1,Table 26(l3)	-	50	-
9.1&11.1,Table 26(l)	-	50	-
9.1&11.1,Table 26(Mass (Approx))	-	50	-
9.1&11.1,Table 27(dn)	-	50	-
9.1&11.1,Table 27(e1)	-	50	-
9.1&11.1,Table 27(b)	-	50	-
9.1&11.1,Table 27(l3)	-	50	-
9.1&11.1,Table 27(l2)	-	50	-
9.1&11.1,Table 27(e2)	-	50	-
9.1&11.1,Table 27(r)	-	50	-
9.1&11.1,Table 27(a)	-	50	-
9.1&11.1,Table 27(l1)	-	50	-
9.1&11.1,Table 27(Mass)	-	50	-
9.1&11.1,Table 28(D)	-	50	-
9.1&11.1,Table 28(t)	-	50	-
9.1&11.1,Table 28(Mass (Approx))	-	50	-
12.1 to 12.7(Coating )	-	500	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13374

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1879 (2010)

Malleable cast iron pipe fittings - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Type of Fittings - IS 1879)	-	200	BIS 10% discount
5.1.2(Size designation - IS 1879)	-	200	BIS 10% discount
5.1.2.1(Equal fitting - IS 1879)	-	200	BIS 10% discount
5.1.2.2(Unequal fitting -IS 1879)	-	200	BIS 10% discount
5.1.3(Right and Left hand thread - IS 1879)	-	200	BIS 10% discount
5.1.1(Code Number -IS 1879)	-	200	BIS 10% discount
6.1(Tensile Strength - IS 14329)	-	500	BIS 10% discount
6.1(Elongation - Is 14329)	-	500	BIS 10% discount
7.2- Table 2(Wall thickness of fittings - IS 1879)	-	200	BIS 10% discount
7.5 - Table 2(Projection of Rainforcement - IS 1879)	-	200	BIS 10% discount
7.5 - Table 3(Width of Rainforcement - IS 1879)	-	200	BIS 10% discount
7.1 - Table 4 to Table 27(a - IS 1879)	-	200	BIS 10% discount
7.1 - Table 28(d -IS 1879)	-	200	BIS 10% discount
8.1(Thread -IS 554)	-	1000	BIS 10% discount
8.2(Alignment of threads -IS 554)	-	1000	BIS 10% discount
9(Freedom from defects )	-	100	BIS 10% discount
10.i)(Mass of Galvanized coating)	-	500	BIS 10% discount
10.ii)(Uniformity of Galvanized coating-IS 2633)	-	500	BIS 10% discount
10.iii)(Adhesion of Galvanized coating IS 2629)	-	500	BIS 10% discount
10.iv)(Freedom from defects IS 4759)	-	100	BIS 10% discount
11(Pressure Test)	-	500	BIS 10% discount
8.1 (chem)(Thread -IS 554)	-	250	BIS 10% discount
5.1.1(Type of Fittings - IS 1879)	-	200	-
5.1.2(Size designation - IS 1879)	-	200	-
5.1.2.1(Equal fitting - IS 1879)	-	200	-
5.1.2.2(Unequal fitting -IS 1879)	-	200	-
5.1.3(Right and Left hand thread - IS 1879)	-	200	-
5.1.1(Code Number -IS 1879)	-	200	-
6.1(Tensile Strength - IS 14329)	-	500	-
6.1(Elongation - Is 14329)	-	500	-
7.2- Table 2(Wall thickness of fittings - IS 1879)	-	200	-
7.5 - Table 2(Projection of Rainforcement - IS 1879)	-	200	-
7.5 - Table 3(Width of Rainforcement - IS 1879)	-	200	-
7.1 - Table 4 to Table 27(a - IS 1879)	-	200	-
7.1 - Table 28(d -IS 1879)	-	200	-
8.1(Thread -IS 554)	-	1000	-
8.2(Alignment of threads -IS 554)	-	1000	-
9(Freedom from defects )	-	100	-
10.i)(Mass of Galvanized coating)	-	500	-
10.ii)(Uniformity of Galvanized coating-IS 2633)	-	500	-
10.iii)(Adhesion of Galvanized coating IS 2629)	-	500	-
10.iv)(Freedom from defects IS 4759)	-	100	-
11(Pressure Test)	-	500	-
8.1 (chem)(Thread -IS 554)	-	250	-
12(Compression Test)	-	250	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13375

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1825 (1983)

Specification for aluminium alloy milk cans (Second Revision)

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.1,3.2,3.3(Copper)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Manganese)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Silicon)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Iron)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Aluminium)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Magnesium)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Zinc)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Titanium)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Vanadium)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Chromium)	-	100	BIS 10% discount
8(a) Rated Capacity)	-	300	BIS 10% discount
8(b) Point of Capacity)	-	300	BIS 10% discount
8(c) Batch OR Code No.)	-	100	BIS 10% discount
8(d) BIS Mark)	-	100	BIS 10% discount
8(e) Manufacturer's Trade Mark )	-	100	BIS 10% discount
2(Capacity)	-	300	BIS 10% discount
4 Fig. 1(Dimensions & Shape)	-	200	BIS 10% discount
4 Fig. 1(A)	-	100	BIS 10% discount
4 Fig. 1(B)	-	100	BIS 10% discount
4 Fig. 1(C )	-	100	BIS 10% discount
4 Fig. 1(D)	-	100	BIS 10% discount
4 Fig. 1(E)	-	100	BIS 10% discount
4 Fig. 1(F)	-	100	BIS 10% discount
4 Fig. 1(G)	-	100	BIS 10% discount
4 Fig. 1(H)	-	100	BIS 10% discount
4 Fig. 1(BOTTOM BAND)	-	100	BIS 10% discount
4 Fig. 1(Dimension)	-	200	BIS 10% discount
4 Fig. 1(HANDLE )	-	100	BIS 10% discount
4 Fig. 1(LID)	-	200	BIS 10% discount
4 Fig. 1(Hole Dia 8 ,2 holes)	-	100	BIS 10% discount
4 Fig. 1(Hole Dia 12, 3 holes)	-	100	BIS 10% discount
5(a)Transport cans shall consist of a body, bottom band)	-	100	BIS 10% discount
5(lid and handles.)	-	200	BIS 10% discount
5(b)Minimum Thickness(in mm))	-	100	BIS 10% discount
5(i) Body and Neck)	-	100	BIS 10% discount
5(ii) Bottom)	-	100	BIS 10% discount
5(iii) Lid (Inner))	-	100	BIS 10% discount
5(iv) Lid (Outer))	-	100	BIS 10% discount
5(c) Mode of Shaping)	-	100	BIS 10% discount
5(i) If the thickness at shoulder is less than 2.5 mm a )	-	100	BIS 10% discount
5(ii) Brinell Hardness 85 HB Min.)	-	100	BIS 10% discount
5(d) BOTTOM BAND- It shall be shrunk fit with a )	-	100	BIS 10% discount
5(proper locking arrangement on the body. This shall)	-	100	BIS 10% discount
5(be followed by brazing or welding all round.)	-	100	BIS 10% discount
5(e) HANDLES (as per Cl 5.6))	-	100	BIS 10% discount
5(f) SEALING LUG (as per Cl 5.7))	-	100	BIS 10% discount
5(g)Workmanship and Finish- All brazing or welding shall )	-	100	BIS 10% discount
5(be sound , free of porosity and shall be finished smooth .)	-	100	BIS 10% discount
5(h) Mass 6.5 Kg. Min.)	-	100	BIS 10% discount
7(i) Air Pressure Test (Cl 7.1))	-	300	BIS 10% discount
7(ii) Drop Test (Cl 7.2))	-	300	BIS 10% discount
7(iii) The cans when filled with water and inverted shall not show any profuse leakage through lids. )	-	400	BIS 10% discount
8(a) Rated Capacity)	-	300	BIS 10% discount
8(b) Point of Capacity)	-	300	BIS 10% discount
8(c) Batch OR Code No.)	-	100	BIS 10% discount
8(d) BIS Mark)	-	100	BIS 10% discount
8(e) Manufacturer's Trade Mark )	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Copper)	-	100	-
Cl. 3.1,3.2,3.3(Manganese)	-	100	-
Cl. 3.1,3.2,3.3(Silicon)	-	100	-
Cl. 3.1,3.2,3.3(Iron)	-	100	-
Cl. 3.1,3.2,3.3(Aluminium)	-	100	-
Cl. 3.1,3.2,3.3(Magnesium)	-	100	-
Cl. 3.1,3.2,3.3(Zinc)	-	100	-
Cl. 3.1,3.2,3.3(Titanium)	-	100	-
Cl. 3.1,3.2,3.3(Vanadium)	-	100	-
Cl. 3.1,3.2,3.3(Chromium)	-	100	-
8(a) Rated Capacity)	-	300	-
8(b) Point of Capacity)	-	300	-
8(c) Batch OR Code No.)	-	100	-
8(d) BIS Mark)	-	100	-
8(e) Manufacturer's Trade Mark )	-	100	-
2(Capacity)	-	300	-
4 Fig. 1(Dimensions & Shape)	-	200	-
4 Fig. 1(A)	-	100	-
4 Fig. 1(B)	-	100	-
4 Fig. 1(C )	-	100	-
4 Fig. 1(D)	-	100	-
4 Fig. 1(E)	-	100	-
4 Fig. 1(F)	-	100	-
4 Fig. 1(G)	-	100	-
4 Fig. 1(H)	-	100	-
4 Fig. 1(BOTTOM BAND)	-	100	-
4 Fig. 1(Dimension)	-	200	-
4 Fig. 1(HANDLE )	-	100	-
4 Fig. 1(LID)	-	100	-
4 Fig. 1(Hole Dia 8 ,2 holes)	-	100	-
4 Fig. 1(Hole Dia 12, 3 holes)	-	100	-
5(a)Transport cans shall consist of a body, bottom band)	-	100	-
5(lid and handles.)	-	100	-
5(b)Minimum Thickness(in mm))	-	100	-
5(i) Body and Neck)	-	100	-
5(ii) Bottom)	-	100	-
5(iii) Lid (Inner))	-	100	-
5(iv) Lid (Outer))	-	100	-
5(c) Mode of Shaping)	-	100	-
5(i) If the thickness at shoulder is less than 2.5 mm a )	-	100	-
5(ii) Brinell Hardness 85 HB Min.)	-	100	-
5(d) BOTTOM BAND- It shall be shrunk fit with a )	-	100	-
5(proper locking arrangement on the body. This shall)	-	100	-
5(be followed by brazing or welding all round.)	-	100	-
5(e) HANDLES (as per Cl 5.6))	-	100	-
5(f) SEALING LUG (as per Cl 5.7))	-	100	-
5(g)Workmanship and Finish- All brazing or welding shall )	-	100	-
5(be sound , free of porosity and shall be finished smooth .)	-	100	-
5(h) Mass 6.5 Kg. Min.)	-	100	-
7(i) Air Pressure Test (Cl 7.1))	-	300	-
7(ii) Drop Test (Cl 7.2))	-	300	-
7(iii) The cans when filled with water and inverted shall not show any profuse leakage through lids. )	-	100	-
8(a) Rated Capacity)	-	300	-
8(b) Point of Capacity)	-	300	-
8(c) Batch OR Code No.)	-	100	-
8(d) BIS Mark)	-	100	-
8(e) Manufacturer's Trade Mark )	-	100	-
Cl. 3.1,3.2,3.3(Copper)	-	100	-
Cl. 3.1,3.2,3.3(Manganese)	-	100	-
Cl. 3.1,3.2,3.3(Silicon)	-	100	-
Cl. 3.1,3.2,3.3(Iron)	-	100	-
Cl. 3.1,3.2,3.3(Aluminium)	-	100	-
Cl. 3.1,3.2,3.3(Magnesium)	-	100	-
Cl. 3.1,3.2,3.3(Zinc)	-	100	-
Cl. 3.1,3.2,3.3(Titanium)	-	100	-
Cl. 3.1,3.2,3.3(Vanadium)	-	100	-
Cl. 3.1,3.2,3.3(Chromium)	-	100	-
8(a) Rated Capacity)	-	300	-
8(b) Point of Capacity)	-	300	-
8(c) Batch OR Code No.)	-	100	-
8(d) BIS Mark)	-	100	-
8(e) Manufacturer's Trade Mark )	-	100	-
2(Capacity)	-	300	-
4 Fig. 1(Dimensions & Shape)	-	200	-
4 Fig. 1(A)	-	100	-
4 Fig. 1(B)	-	100	-
4 Fig. 1(C )	-	100	-
4 Fig. 1(D)	-	100	-
4 Fig. 1(E)	-	100	-
4 Fig. 1(F)	-	100	-
4 Fig. 1(G)	-	100	-
4 Fig. 1(H)	-	100	-
4 Fig. 1(BOTTOM BAND)	-	100	-
4 Fig. 1(Dimension)	-	200	-
4 Fig. 1(HANDLE )	-	100	-
4 Fig. 1(LID)	-	100	-
4 Fig. 1(Hole Dia 8 ,2 holes)	-	100	-
4 Fig. 1(Hole Dia 12, 3 holes)	-	100	-
5(a)Transport cans shall consist of a body, bottom band)	-	100	-
5(lid and handles.)	-	100	-
5(b)Minimum Thickness(in mm))	-	100	-
5(i) Body and Neck)	-	100	-
5(ii) Bottom)	-	100	-
5(iii) Lid (Inner))	-	100	-
5(iv) Lid (Outer))	-	100	-
5(c) Mode of Shaping)	-	100	-
5(i) If the thickness at shoulder is less than 2.5 mm a )	-	100	-
5(ii) Brinell Hardness 85 HB Min.)	-	100	-
5(d) BOTTOM BAND- It shall be shrunk fit with a )	-	100	-
5(proper locking arrangement on the body. This shall)	-	100	-
5(be followed by brazing or welding all round.)	-	100	-
5(e) HANDLES (as per Cl 5.6))	-	100	-
5(f) SEALING LUG (as per Cl 5.7))	-	100	-
5(g)Workmanship and Finish- All brazing or welding shall )	-	100	-
5(be sound , free of porosity and shall be finished smooth .)	-	100	-
5(h) Mass 6.5 Kg. Min.)	-	100	-
7(i) Air Pressure Test (Cl 7.1))	-	300	-
7(ii) Drop Test (Cl 7.2))	-	300	-
7(iii) The cans when filled with water and inverted shall not show any profuse leakage through lids. )	-	100	-
8(a) Rated Capacity)	-	300	-
8(b) Point of Capacity)	-	300	-
8(c) Batch OR Code No.)	-	100	-
8(d) BIS Mark)	-	100	-
8(e) Manufacturer's Trade Mark )	-	100	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13376

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 2039 : Part 1 to 3 (1991)

Steel tubes for bicycle and cycle rickshaws - Specification (Second Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1 Table 1(Carbon)	-	100	BIS 10% discount
Cl. 5.1 Table 1(Silicon)	-	100	BIS 10% discount
Cl. 5.1 Table 1(Manganese)	-	100	BIS 10% discount
Cl. 5.1 Table 1(Phosphorous)	-	100	BIS 10% discount
Cl. 5.1 Table 1(Sulphur)	-	100	BIS 10% discount
Cl. 6.1(Workmanship)	-	200	BIS 10% discount
Cl. 6.2(Fin Height)	-	2000	BIS 10% discount
Cl. 6.3(Straightness)	-	2000	BIS 10% discount
Cl. 8.1(Tensile Strength)	-	1000	BIS 10% discount
Cl. 8.1(Yield Strength)	-	1000	BIS 10% discount
Cl. 8.1(Elongation)	-	500	BIS 10% discount
Cl. 8.2(Drift Expansion Test- IS 2335)	-	1500	BIS 10% discount
Cl. 8.3(Flattening Test-IS 2338)	-	1500	BIS 10% discount
Cl. 4.2.1(Diameter)	-	600	BIS 10% discount
Cl. 4.2.2(Thickness)	-	500	BIS 10% discount
Cl. 3.2.1, Table 4(Yield Stress)	-	500	BIS 10% discount
Cl. 3.2.1, Table 4(UTS)	-	1000	BIS 10% discount
Cl. 3.2.1, Table 4(Elongation)	-	500	BIS 10% discount
Cl. 3.2.2, Table 2(Drift Expansion Test- IS 2335)	-	1500	BIS 10% discount
Cl. 3.2.3, Table 3(Flattening Test-IS 2338)	-	1500	BIS 10% discount
Cl. 4.2.3(Length)	-	500	BIS 10% discount
Cl. 3.1(Carbon)	-	100	BIS 10% discount
Cl. 3.1(Silicon)	-	100	BIS 10% discount
Cl. 3.1(Manganese)	-	100	BIS 10% discount
Cl. 3.1(Phosphorous)	-	100	BIS 10% discount
Cl. 3.1(Sulphur)	-	100	BIS 10% discount
Cl. 4.2.1, Table 7(Yield Stress)	-	1000	BIS 10% discount
Cl. 4.2.1, Table 7(UTS)	-	1000	BIS 10% discount
Cl. 4.2.1, Table 7(Crushing)	-	600	BIS 10% discount
Cl. 4.2.2, Table 8(Drift Expansion Test- IS 2335)	-	1000	BIS 10% discount
Cl. 4.2.3, Table 9(Flattening Test-IS 2338)	-	1500	BIS 10% discount
Cl. 9(Diameter)	-	600	BIS 10% discount
Cl. 5.2.2(Mean Thickness)	-	500	BIS 10% discount
Cl. 5.2.3, Table 6(Length)	-	500	BIS 10% discount

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13377

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

11250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Tensile Test & Flattening Test)	-	2250	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	3500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	700	-
Cl 12(Bituminous Coating & Galvanizing )	-	2000	-
Cl 14(Workmanship)	-	350	-
5.2(phosphorus)	-	300	-
Cl 14(Workmanship)	-	350	-
5.2(sulphur)	-	300	-
Cl 6(Tensile Test & Flattening Test)	-	2250	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	3500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	700	-
Cl 12(Bituminous Coating & Galvanizing )	-	2000	-
Cl 14(Workmanship)	-	350	-
Cl 6(Tensile Test & Flattening Test)	-	2250	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	3500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	700	-
Cl 12(Bituminous Coating & Galvanizing )	-	2000	-
Cl 14(Workmanship)	-	350	-
11.0(Alignment test IS 4270: 2001)	-	350	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13378

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 2 Table 3(Carbon Content IS 228)	-	100	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	100	-
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	100	-
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	100	-
9.3(Guided bend test(For SAW Pipes))	-	500	-
10(Hydaulic pressure test)	-	1000	-
11.1, Table 5.(Outside Diameter (OD))	-	500	-
11.1, Table 5.(Thickness)	-	200	-
11.1, Table 5.(Mass)	-	200	-
12.3.3(Ovality)	-	200	-
12.5(Strightness)	-	1000	-
14.1(Visual inspection, Appearance and Workmanship)	-	200	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	200	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	200	-
8.1(CE)	-	500	-
9.3(Guided Bend Test (for SAW Pipes))	-	500	-
9.2.3(Flattening Test for seamless pipes)	-	500	-
9.2.1(Flattening test for ERW pipes )	-	500	-
9.1(Tensile test-Yield Strength)	-	1400	-
9.1(Tensile test-Strength)	-	1000	-
9.1(Tensile test- Elongation)	-	1000	-
8.1 Table 2 Table 3(Carbon Content IS 228)	-	100	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	100	-
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	100	-
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	100	-
9.3(Guided bend test(For SAW Pipes))	-	500	-
10(Hydaulic pressure test)	-	1000	-
11.1, Table 5.(Outside Diameter (OD))	-	500	-
11.1, Table 5.(Thickness)	-	200	-
11.1, Table 5.(Mass)	-	200	-
12.3.3(Ovality)	-	200	-
12.5(Strightness)	-	1000	-
14.1(Visual inspection, Appearance and Workmanship)	-	200	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	200	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	200	-
8.1(CE)	-	500	-
8.1 Table 2 Table 3(Carbon Content IS 228)	-	-	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	-	-
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	-	-
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	-	-
9.3(Guided bend test(For SAW Pipes))	-	-	-
10(Hydaulic pressure test)	-	-	-
11.1, Table 5.(Outside Diameter (OD))	-	-	-
11.1, Table 5.(Thickness)	-	-	-
11.1, Table 5.(Mass)	-	-	-
12.3.3(Ovality)	-	-	-
12.5(Strightness)	-	-	-
14.1(Visual inspection, Appearance and Workmanship)	-	-	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	-	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	-	-
8.1(CE)	-	-	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13379

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 9523 (2000)

Ductile iron fittings for pressure pipes for water, gas and sewage - Specification (First Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(Thickness)	-	500	-
Cl 6 & Table 4,5,6&7(Design & Tolerance)	-	1000	-
Cl 7(Rubber Gasket)	-	1000	-
Cl 9(Tensile Test & Hardness Test)	-	1500	-
Cl 10(Hydrostatic Test)	-	1000	-
Cl 11(Nominal Diameter, Ovality, Dimensions, No. Of Holes & Bolt Sizes)	-	1000	-
Cl 13(Coating)	-	1000	-
Cl 5(Thickness)	-	500	-
Cl 6 & Table 4,5,6&7(Design & Tolerance)	-	1000	-
Cl 7(Rubber Gasket)	-	1000	-
Cl 9(Tensile Test & Hardness Test)	-	1	-
Cl 10(Hydrostatic Test)	-	1000	-
Cl 11(Nominal Diameter, Ovality, Dimensions, No. Of Holes & Bolt Sizes)	-	1000	-
Cl 13(Coating)	-	1000	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13380

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 11722 (1986)

Specification for thin walled flexible quick coupling pipes

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Pipe Manufacturing Process )	-	100	10% discount for BIS
5,5.1(Workmsnship &Finish)	-	100	10% discount for BIS
6 &7 ; Table 1(Dimension & Tolerance)	-	200	10% discount for BIS
8(Length)	-	100	10% discount for BIS
9(Galvanizing ,IS 4736)	-	800	10% discount for BIS
10,10.1(Couplers for thin walled coupling pipes ; Appendix A)	-	1000	10% discount for BIS
10,10.2 ,Table 1(Coupler,Type 1B, IS 5382)	-	1000	10% discount for BIS
10,10.3,Table 2(Leakage Test)	-	500	10% discount for BIS
11, Table 3(Angularity of Joint)	-	500	10% discount for BIS
12(Straightness)	-	1000	10% discount for BIS
13.1(Flattening Test,IS 2328)	-	500	10% discount for BIS
13.2(Tensile Test ,; IS 1608(P1))	-	1000	10% discount for BIS
14(Hydraulic Test)	-	900	10% discount for BIS
4.1(Pipe Manufacturing Process )	-	100	10% discount for BIS
5,5.1(Workmsnship &Finish)	-	100	10% discount for BIS
6 &7 ; Table 1(Dimension & Tolerance)	-	100	10% discount for BIS
4.1(Pipe Manufacturing Process )	-	100	-
5,5.1(Workmsnship &Finish)	-	100	-
6 &7 ; Table 1(Dimension & Tolerance)	-	200	-
8(Length)	-	100	-
9(Galvanizing ,IS 4736)	-	800	-
10,10.1(Couplers for thin walled coupling pipes ; Appendix A)	-	1000	-
10,10.2 ,Table 1(Coupler,Type 1B, IS 5382)	-	1000	-
10,10.3,Table 2(Leakage Test)	-	500	-
11, Table 3(Angularity of Joint)	-	500	-
12(Straightness)	-	1000	-
13.1(Flattening Test,IS 2328)	-	500	-
13.2(Tensile Test ,; IS 1608(P1))	-	1000	-
14(Hydraulic Test)	-	900	-
4.1(Pipe Manufacturing Process )	-	100	-
5,5.1(Workmsnship &Finish)	-	100	-
6 &7 ; Table 1(Dimension & Tolerance)	-	200	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number