BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15600 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

13381

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 9890 (1981)

Specification for general purpose ball valves

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Nom. size. )	-	1000	-
5(End connections)	-	1000	-
6(Drain Connection)	-	1000	-
7(Joints)	-	1000	-
10(Trim)	-	1000	-
3(Nom. size. )	-	1000	-
5(End connections)	-	1000	-
6(Drain Connection)	-	1000	-
7(Joints)	-	1000	-
10(Trim)	-	1000	-
3(Nom. size. )	-	1000	-
5(End connections)	-	1000	-
6(Drain Connection)	-	1000	-
7(Joints)	-	1000	-
10(Trim)	-	1000	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13382

BIS, Eastern Regional Laboratory (ERL)

None

IS 5414 (1995)

Gaskets and packings - Gland packing jute and hemp - Specification (First Revision)

Rs.825/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (Lubricant Content -A-1 of IS 5414)	-
4.3 (Graphite or Mica Content - A-2 of IS 5414)	-
4.4 (Thickness)	-
4.5 (Weight per metre)	-
5 (Workmanship)	-

-
Except breaking load test

13383

Allumera Engineering Solutions Pvt ltd

8175206

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC-33gr,OPC-43gr,OPC-43S,OPC-53gr,OPC-53S

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	6500	GST@ 18.5 percent is applicable to above testing charges.
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	2000	-
6.1 Table-2 iii.(Insoluble residue)	-	1500	-
6.1 Table-2 iv(Magnesia)	-	1500	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	1000	-
6.1 Table-2 vi(Loss on ignition)	-	1500	-
6.1 Table-2 vii(Chloride content)	-	1500	-
6.1 Table-2 viii(Alkali content)	-	2000	-
7 Table-3 i.(Fineness)	-	1000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1000	-
7 Table-3 ii b(Expansion by Autoclave)	-	2000	-
7 Table-3 iii a(Setting Time Initial)	-	900	-
7 Table-3 iii b(Setting Time Final)	-	900	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	800	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	900	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1500	-
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	under exclusion
11(Marking)	-	500	visual & obervation remarks

13 Dec, 2029

-
Exclusion: Cl.7 Table-3 v (Transverse Strength - IS 4031 Part 8 (Optional))

13384

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION (SITRA), COIMBATORE

6165234

IS 17334 (2019)

Medical textiles – Surgical gowns and surgical drapes – Specification

56130 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 Table 1 (x.)(Resistance to microbial penetration — Wet (IB))	-	14000	-
7.1 Table 1 (ix.)(Resistance to microbial penetration — Dry (CFU))	-	13500	-
7.1 Table 1 (iv.)(Viral resistance)	-	10000	-
7.1 Table 1 (iii.)(Blood resistance)	-	4500	-
7.1 Table 1 (xi.)(Biocompatability evaluation Cytotoxicity, Irritation and skin sensitization)	-	1600	-
7.1, Table 1 (i.)(Impact penetration)	-	600	-
7.1 Table 1 (xii.)(Moisture vapour transmission rate (Max.))	-	3000	-
7.1 Table 1 (v.)(Particle release)	-	3000	-
7.1 Table 1 (ii.)(Hydrostatic resistance (cmwc))	-	550	-
7.1 Table 1 (viii.)(Cleanliness–microbial (CFU/100 cm2))	-	3750	-
7.1 Table 1 (vii.)(bursting strength (dry and wet) (kPa))	-	650	-
7.1 Table 1 (vi.)(tensile strength (dry and wet) (N))	-	980	-

-
-

13385

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

19000, 19500, 31000, 31500, 64430

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(0.2 Percent Proof Stress)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(0.2 Percent Proof Stress)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Tensile Strength)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Aluminium)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Lead)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Chromium)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Titanium and or other grain refining elements)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Zinc)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Manganese)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Iron)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Silicon)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Magnesium)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Copper)	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Tensile Strength)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Aluminium)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Titanium and or other grain refining elements)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Lead)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Zinc)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Manganese)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Iron)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Silicon)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Magnesium)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Copper)	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Tensile Strength)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Aluminium)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Lead)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Chromium)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Titanium and or other grain refining elements)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Zinc)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Manganese)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Iron)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Silicon)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Magnesium)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Copper)	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Tensile Strength)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Aluminium)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Cu+Si+Fe+Mn+Zn)	-	1000	-
4.2, Table 1of IS:21 (Designation 19500)(Lead)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Zinc)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Manganese)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Iron)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Silicon)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Copper)	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Tensile Strength)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Lead)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	1000	-
4.2, Table 1of IS:21 (Designation 19000)(Aluminium)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Zinc)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Manganese)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Iron)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Silicon)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Magnesium)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Copper)	-	250	-
4.1, & 4.1.1(Lead)	-	250	-
4.1.2(Aluminium)	-	250	-

15 Aug, 2028

-
-

13386

Chem-Tech Laboratories Private Limited, Pune

7170010

IS 17042 : Part 1 (2020)

Diesel Engines — NOx Reduction Agent AUS 32 Part 1 Quality Requirements ( First Revision )

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 and table 1(Alkalinity as NH3)	-	450	-
5 and table 1(Urea content)	-	350	-
5 and table 1(Refractive index)	-	500	-
5 and table 1(Biuret)	-	750	-
5 and table 1(Aldehydes)	-	500	-
5 and table 1(Insoluble matter)	-	850	-
5 and table 1(Phosphate (PO4))	-	750	-
5 and table 1(Aluminium)	-	85	-
5 and table 1(Calcium)	-	85	-
5 and table 1(Chromium)	-	85	-
5 and table 1(Copper)	-	85	-
5 and table 1(Iron)	-	85	-
5 and table 1(Potassium)	-	85	-
5 and table 1(Magnesium)	-	85	-
5 and table 1(Sodium)	-	85	-
5 and table 1(Nickel)	-	85	-
5 and table 1(Zinc)	-	85	-

07 Apr, 2028

-
-

13387

National Test House (NR) - NTH, Ghaziabad

8101304

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

15000 View breakup
For BIS samples: BIS approved Testng charges. For Others: Rs.15000 (Inclusive of safety testing charges as per IS 302-2-35 @ Rs.5000/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7 of IS 302-2-35:2017(Marking)	-	100	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.6 of IS 302-2-35:2017(Classification)	-	100	-
Cl.6 of IS 302-2-35:2017(Classification)	-	0	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	1000	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	500	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	0	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	500	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	100	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	0	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	0	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	100	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	100	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	100	-
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	500	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	400	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	300	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	100	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	300	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	500	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	500	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	-
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	0	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	0	-
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	0	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	0	-
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	-
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	-
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	-
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	0	-
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	500	-
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	0	-
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	500	-
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	0	-
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	0	-
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	0	-
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	0	-
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	0	-
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	0	-
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	0	-
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	0	-
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	0	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	0	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	-
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	0	-
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	0	-
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	0	-
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	0	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	0	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	500	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	0	-
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	100	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	100	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	0	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	1000	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	0	-
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	100	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	100	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	0	-
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	100	-
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	0	-
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	0	-
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	1000	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	900	-
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	100	-
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	0	-
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	0	-
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	0	-
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	0	-
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	0	-
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	0	-

26 Oct, 2028

-
-

13388

BIS, Central Laboratory (CL)

None

IS 4566 (2020)

Specification For Methylene Chloride ( Dichloromethane ) — Technical ( Second Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1 (Description)	-
Cl.4.2, Table-1(i) (Relative density at 27/27°C)	-
Cl.4.2, Table-1(ii) (Distillation range at a pressure of 1 bar (optional for grade 1))	-
Cl.4.2, Table-1(iii) (Residue on evapouration)	-
Cl.4.2, Table-1(v) (Acidity (as Hcl))	-
Cl.4.2, Table-1(vi) (Free Chlorine)	-
Cl.4.2, Table-1(vii) (Aldehydes)	-
Cl.4.2, Table-1(viii) (Iron (as Fe))	-
Cl.4.2, Table-1(ix) (Heavy metals (as Pb))	-
Cl.4.2, Table-1(x) (Resistance to potassium permanganate)	-
Cl.4.2, Table-1(xi) (Nesslers reagent)	-
Cl.4.2, Table-1(xii) (Resistance to sulphuric acid)	-

-
-

13389

BIS, Central Laboratory (CL)

None

IS 5149 (2020)

Specification for Maleic Anhydride, Technical ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.2.1 (Description)	-
Cl.2.2, Table-1(i) (Crystallizing point)	-
Cl.2.2, Table-1(ii) (Colour of the molten material)	-
Cl.2.2, Table-1(iii) (Maleic acid content)	-
Cl.2.2, Table-1(iv) (Maleic anhydride content)	-
Cl.2.2, Table-1(v) (Ash)	-
Cl.2.2, Table-1(vi) (Iron content (as Fe))	-
Cl.2.1 (Description)	-
Cl.2.2, Table-1(i) (Crystallizing point)	-
Cl.2.2, Table-1(ii) (Colour of the molten material)	-
Cl.2.2, Table-1(iii) (Maleic acid content)	-
Cl.2.2, Table-1(iv) (Maleic anhydride content)	-
Cl.2.2, Table-1(v) (Ash)	-
Cl.2.2, Table-1(vi) (Iron content (as Fe))	-
Cl.2.1 (Description)	-
Cl.2.2, Table-1(i) (Crystallizing point)	-
Cl.2.2, Table-1(ii) (Colour of the molten material)	-
Cl.2.2, Table-1(iii) (Maleic acid content)	-
Cl.2.2, Table-1(iv) (Maleic anhydride content)	-
Cl.2.2, Table-1(v) (Ash)	-
Cl.2.2, Table-1(vi) (Iron content (as Fe))	-
Cl.2.1 (Description)	-
Cl.2.2, Table-1(i) (Crystallizing point)	-
Cl.2.2, Table-1(ii) (Colour of the molten material)	-
Cl.2.2, Table-1(iii) (Maleic acid content)	-
Cl.2.2, Table-1(iv) (Maleic anhydride content)	-
Cl.2.2, Table-1(v) (Ash)	-
Cl.2.2, Table-1(vi) (Iron content (as Fe))	-
Cl.2.1 (Description)	-
Cl.2.2, Table-1(i) (Crystallizing point)	-
Cl.2.2, Table-1(ii) (Colour of the molten material)	-
Cl.2.2, Table-1(iii) (Maleic acid content)	-
Cl.2.2, Table-1(iv) (Maleic anhydride content)	-
Cl.2.2, Table-1(v) (Ash)	-

-
Test facility is complete for this IS

13390

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

5210 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(phosphorus)	-	50	-
5.1(copper)	-	50	-
5.1(nitrogen)	-	700	-
5.1(aluminium)	-	50	-
5.1(manganese)	-	50	-
5.1(sulphur)	-	50	-
5.1(carbon)	-	50	-
5.1(Titanium)	-	50	-
5.1(micro alloy)	-	250	-
7.4(Mass of Coating: Single Spot Test)	-	350	-
7.4(Mass of Coating: Triple Spot Test)	-	350	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	350	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	350	-
Cl. 17(Marking )	-	150	-
Cl. 14 & Cl. 15(Pitch of corrugation (average of 4))	-	50	-
Cl. 14 & Cl. 15(Depth of corrugation (average of 4))	-	50	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-	50	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-	50	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-	50	-
Cl. 14 (Cl. 14 & Cl 15 (Width))	-	50	-
Cl. 14 (Cl. 14 & Cl 15 (Length))	-	50	-
Cl.12(Freedom from defects)	-	50	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	100	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	500	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	500	-
cl 5.1, T-1, Note-6, For reinforced steel(P)	-	50	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb+V+Ti+B)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(B)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(Ti)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(V)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb)	-	250	-
cl 5.1, T-1, Note-4, For Cu bearing quality(Cu)	-	50	-
cl 5.1, T-1, Note-2, When Al-Si killed(Si)	-	50	-
cl 5.1, T-1, Note-2, When Al-Si killed(Al)	-	50	-
cl 5.1, T-1, Note-3(N2)	-	700	-
cl 5.1, T-1, designation For GP 550(P)	-	50	-
cl 5.1, T-1, designation For GP 550(S)	-	50	-
cl 5.1, T-1, designation For GP 550(Mn)	-	50	-
cl 5.1, T-1, designation For GP 550(C)	-	50	-
cl 5.1, T-1, Note-3(N2)	-	700	-
cl 5.1, T-1, designation For GP 450(P)	-	50	-
cl 5.1, T-1, designation For GP 450(S)	-	50	-
cl 5.1, T-1, designation For GP 450(Mn)	-	50	-
cl 5.1, T-1, designation For GP 450(C)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(P)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(S)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(Mn)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(C)	-	50	-
cl 5.1, T-1, designation For GP 300(P)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(P)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(S)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(Mn)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(C)	-	50	-
cl 5.1, T-1, designation For GP 300(S)	-	50	-
cl 5.1, T-1, designation For GP 300(Mn)	-	50	-
cl 5.1, T-1, designation For GP 300(C)	-	50	-
cl 5.1, T-1, designation For GP275(P)	-	50	-
cl 5.1, T-1, designation For GP275(S)	-	50	-
cl 5.1, T-1, designation For GP275(Mn)	-	50	-
cl 5.1, T-1, designation For GP275(C)	-	50	-
cl 5.1, T-1, designation For GP250(P)	-	50	-
cl 5.1, T-1, designation For GP250(S)	-	50	-
cl 5.1, T-1, designation For GP230(Mn)	-	50	-
cl 5.1, T-1, designation For GP230(C)	-	50	-
cl 5.1, T-1, designation For GPIF(P)	-	50	-
cl 5.1, T-1, designation For GPIF(S)	-	50	-
cl 5.1, T-1, designation For GPIF(Mn)	-	50	-
cl 5.1, T-1, designation For GPIF(C)	-	50	-
cl 5.1, T-1, designation For GPED(P)	-	50	-
cl 5.1, T-1, designation For GPED(S)	-	50	-
cl 5.1, T-1, designation For GPED(Mn)	-	50	-
cl 5.1, T-1, designation For GPED(C)	-	50	-
cl 5.1, T-1, designation For GPD(P)	-	50	-
cl 5.1, T-1, designation For GPD(S)	-	50	-
cl 5.1, T-1, designation For GPD(Mn)	-	50	-
cl 5.1, T-1, designation For GPD(C)	-	50	-
cl 5.1, T-1, designation For GPL(P)	-	50	-
cl 5.1, T-1, designation For GPL(S)	-	50	-
cl 5.1, T-1, designation For GPL(Mn)	-	50	-
cl 5.1, T-1, designation For GPL(C)	-	50	-
cl 5.1, T-1, designation For GC(P)	-	50	-
cl 5.1, T-1, designation For GC(S)	-	50	-
cl 5.1, T-1, designation For GC(Mn)	-	50	-
cl 5.1, T-1, designation For GC(C)	-	50	-
cl 5.1, T-1, designation For GPH (P)	-	50	-
cl 5.1, T-1, designation For GPH (S)	-	50	-
cl 5.1, T-1, designation For GPH (Mn)	-	50	-
cl 5.1, T-1, designation For GPH (C)	-	50	-
cl 5.1, T-1, designation For GP (P)	-	50	-
cl 5.1, T-1, designation For GP (S)	-	50	-
cl 5.1, T-1, designation For GP (Mn)	-	50	-
cl 5.1, T-1, designation For GP (C)	-	50	-
Cl.15.1.3.1(Overall width after corrugation)	-	100	-
Cl.15.1.3.1(Overall width before corrugation)	-	100	-
Cl. 9(Surface roughness)	-	500	-
Cl 14(Length, Width & Thickness)	-	100	-
Cl 13(Weight)	-	50	-
Cl 12(Workmanship)	-	150	-
Cl 10(Galvanising Test)	-	350	-
Cl 8.2(Press)	-	500	-
Cl 8.1(UTM)	-	500	-
Cl.15.1.3.1(Overall width after corrugation)	-	50	-
Cl.15.1.3.1(Overall width before corrugation)	-	50	-
Cl. 9(Surface roughness)	-	500	-
Cl 14(Length, Width & Thickness)	-	100	-
Cl 13(Weight)	-	50	-
Cl 12(Workmanship)	-	150	-
Cl 10(Galvanising Test)	-	350	-
Cl 8.2(Press)	-	500	-
Cl 8.1(UTM)	-	500	-
Cl.15.1.3.1(Overall width after corrugation)	-	100	-
Cl.15.1.3.1(Overall width before corrugation)	-	100	-
Cl. 9(Surface roughness)	-	500	-
Cl 14(Length, Width & Thickness)	-	100	-
Cl 13(Weight)	-	50	-
Cl 12(Workmanship)	-	150	-
Cl 10(Galvanising Test)	-	350	-
Cl 8.2(Press)	-	500	-
Cl 8.1(UTM)	-	500	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13391

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 8329 (2000)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Hardness & Tensile Test)	-	3000	10% DISCOUNT TO BIS
Cl 11(Hydrostatic Test)	-	3500	10% DISCOUNT TO BIS
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	2500	10% DISCOUNT TO BIS
Cl 10(Hardness & Tensile Test)	-	3000	-
Cl 11(Hydrostatic Test)	-	3500	-
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	2500	-
Cl 10(Hardness & Tensile Test)	-	3000	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13392

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 9295 (1983)

Specification for steel tubes for idlers for belt conveyors (First Revision)

7650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
7.1(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
8.1.1 Table 1(Tensile Strength- IS 1608(1))	-	500	-
8.1.1 Table 1(Yield Strength- IS 1608)	-	250	-
8.1.1 Table 1(Elongation Percent- IS 1608)	-	250	-
8.2(Drift Expansion Test- IS 2335)	-	500	-
8.3(Flattening Test- IS 2328)	-	550	-
9.1 Table 2(Thickness)	-	500	-
9.1 Table 2(Mass)	-	500	-
10(Hardness)	-	500	-
13.1.1(Ovality)	-	500	-
13.1.2(Eccentricity)	-	500	-
15.1(Straightness)	-	1000	-
16.1(Length)	-	500	-
17.1(Surface Protection)	-	200	-
14.0(Workmanship)	-	200	-
6.2(Fin height)	-	200	-
7.1(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
7.1(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
8.1.1 Table 1(Tensile Strength- IS 1608(1))	-	500	-
8.1.1 Table 1(Yield Strength- IS 1608)	-	250	-
8.1.1 Table 1(Elongation Percent- IS 1608)	-	250	-
8.2(Drift Expansion Test- IS 2335)	-	500	-
8.3(Flattening Test- IS 2328)	-	550	-
9.1 Table 2(Thickness)	-	500	-
9.1 Table 2(Mass)	-	500	-
10(Hardness)	-	500	-
13.1.1(Ovality)	-	500	-
13.1.2(Eccentricity)	-	500	-
15.1(Straightness)	-	1000	-
16.1(Length)	-	500	-
17.1(Surface Protection)	-	200	-
7.1(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
7.1(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
8.1.1 Table 1(Tensile Strength- IS 1608(1))	-	500	-
8.1.1 Table 1(Yield Strength- IS 1608)	-	250	-
8.1.1 Table 1(Elongation Percent- IS 1608)	-	250	-
8.2(Drift Expansion Test- IS 2335)	-	500	-
8.3(Flattening Test- IS 2328)	-	550	-
9.1 Table 2(Thickness)	-	500	-
9.1 Table 2(Mass)	-	500	-
10(Hardness)	-	500	-
13.1.1(Ovality)	-	500	-
13.1.2(Eccentricity)	-	500	-
15.1(Straightness)	-	1000	-
16.1(Length)	-	500	-
17.1(Surface Protection)	-	200	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13393

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 7181 (1986)

Specification for horizontally cast iron double flanged pipes for water, gas and sewage (First Revision)

9900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Manufacture)	-	100	-
3.2(Manufacture)	-	100	-
3.3(Manufacture)	-	2000	-
3.4(Manufacture)	-	100	-
3.5(Manufacture)	-	100	-
5.1(Tensile Test)	-	2500	-
6.1(Hydrostatic Test)	-	2000	-
7.1(Sizes and Mass)	-	500	-
7.2(Sizes and Mass)	-	500	-
7.3(Sizes and Mass)	-	500	-
7.4(Sizes and Mass Dimensions of Flange)	-	500	-
8.5(Permissible Deviation from a Straight Line)	-	500	-
9(Coating)	-	500	-
3.1(Manufacture)	-	100	-
3.2(Manufacture)	-	100	-
3.3(Manufacture)	-	2000	-
3.4(Manufacture)	-	100	-
3.5(Manufacture)	-	100	-
5.1(Tensile Test)	-	2500	-
6.1(Hydrostatic Test)	-	2000	-
7.1(Sizes and Mass)	-	500	-
7.2(Sizes and Mass)	-	500	-
7.3(Sizes and Mass)	-	500	-
7.4(Sizes and Mass Dimensions of Flange)	-	500	-
8.5(Permissible Deviation from a Straight Line)	-	500	-
9(Coating)	-	500	-
3.1(Manufacture)	-	100	-
3.2(Manufacture)	-	100	-
3.3(Manufacture)	-	2000	-
3.4(Manufacture)	-	100	-
3.5(Manufacture)	-	100	-
5.1(Tensile Test)	-	2500	-
6.1(Hydrostatic Test)	-	2000	-
7.1(Sizes and Mass)	-	500	-
7.2(Sizes and Mass)	-	500	-
7.3(Sizes and Mass)	-	500	-
7.4(Sizes and Mass Dimensions of Flange)	-	500	-
8.5(Permissible Deviation from a Straight Line)	-	500	-
9(Coating)	-	500	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13394

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 191 (2007)

Copper - Specification (Fourth Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	1000	-
7.1 - Table 4(Silver- IS 440)	-	750	-
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	750	-
7.1 - Table 4(Phosphorus- IS 440)	-	750	-
7.1 - Table 4(Arsenic- IS440)	-	750	-
7.1 - Table 4(Antimony-IS440)	-	750	-
7.1 - Table 4(Bismuth-IS 440)	-	750	-
7.1 - Table 4(Iron IS 440)	-	750	-
7.1 - Table 4(Lead IS 440)	-	750	-
7.1 - Table 4(Nickel IS 440)	-	750	-
7.1 - Table 4(Oxygen IS 440)	-	1000	-
7.1 - Table 4(Selenium - IS 440)	-	750	-
7.1 - Table 4(Sulphur- IS 440)	-	500	-
7.1 - Table 4(Tellurium- IS 440)	-	750	-
7.1 - Table 4(Tin - IS 440)	-	750	-
7.1 - Table 4(Znic-IS 440)	-	500	-
7.1 - Table 4(Selenium + Telluuium- IS 440)	-	500	-
7.1 - Table 4(Total Impurities- IS 440)	-	500	-
8.1(FREEDOM FROM DEFECTS)	-	200	-
8.2(FREEDOM FROM DEFECTS)	-	200	-
5.1- Table 2(L)	-	100	-
5.1- Table 2(L1)	-	100	-
5.1- Table 2(h)	-	100	-
5.1- Table 2(h1)	-	100	-
5.1- Table 2(b)	-	100	-
5.1- Table 2(b1)	-	100	-
5.1- Table 2(R)	-	100	-
5.1- Table 2(R1)	-	100	-
5.1- Table 2(R2 )	-	100	-
5.1- Table 2(α )	-	100	-
5.1- Table 2( β )	-	100	-
5.1- Table 2(γ)	-	100	-
5.2(Billets)	-	100	-
5.4-Table 3 (For Billets)(Mass)	-	100	-
5.2-Table 3 (For Billets)(Diameter)	-	100	-
5.2-Table 3 (For Billets)(Length)	-	100	-
5.2-Table 3 (For Billets)(Deviation from straightness per 1000 mm length)	-	100	-
5.4-Table 3 (Vertically continuously cast wire bars)(Mass)	-	100	-
5.3-Table 3 (Vertically continuously cast wire bars)(Width)	-	100	-
5.3-Table 3 (Vertically continuously cast wire bars)(thickness )	-	100	-
5.3-Table 3 (Vertically continuously cast wire bars)(Other dimention)	-	100	-
5.4-Table 3 (Ingots)(Mass)	-	100	-
5.4-Table 3 (Cast cakes)(Mass)	-	100	-
5.3-Table 3 (Cast cakes)(Width)	-	100	-
5.3-Table 3 (Cast cakes)(thickness )	-	100	-
5.3-Table 3 (Cast cakes)(Deviation from straightness per 1000 mm length)	-	100	-

15 Aug, 2028

-
Amendment No. 2 Included w.e.f. 22.03.2023. Excluding: Cl 9.1- Table 5 (Mass Resistivity- IS 3635), 10 (HYDROGEN EMBRITTLEMENT TEST- IS 191) Hydrogen Test, Cl 9.1 , 9.2 & 10 (Resistivity & HYDROGEN EMBRITTLEMENT TEST)

13395

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 13095 (2020)

Butterfly Valves for General Purposes ( First Revision )

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(VALVE END CONNECTIONS)	-	50	-
6.0( NOMINAL SIZES )	-	50	-
7.0(NOMINAL PRESSURES)	-	50	-
7.2(Class designations)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Flange-b)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-d4)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-f)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Bolting )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -Nos. )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -d2)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -k)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck -d3)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck- r)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-b)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-d4)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-f)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Bolting)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -Nos. )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -d2 )	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -k)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck -d3)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck-r)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - D)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - b)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - d4)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - f)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Bolting)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling - Nos.)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -d2)	-	50	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -k)	-	50	-
9.1.1 ( Double Flanged Body Ends)	-	50	-
9.2.2(Wafer Body Ends)	-	200	-
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-	200	-
11.0(Bodies)	-	200	-
12.0(DISC AND SHAFT)	-	200	-
13.0(SEATING AND LININGS)	-	200	-
14.0(BEARINGS)	-	200	-
14.2(BEARINGS)	-	200	-
14.3(BEARINGS)	-	200	-
16.0(OPERATION)	-	500	-
17.1(Performance Testing)	-	1000	-
17.2(Body Test)	-	1000	-
17.3(Seat Test)	-	300	-
17.4(Disc Strength Test)	-	300	-
Cl. 15 Table 2(Materials)	-	1500	-
5.0(SERVICE APPLICATIONS)	-	100	-
Cl. 15 Table 2(Materials)	-	1500	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13396

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	1000	10% DISCOUNT TO BIS
Cl 9(Press)	-	2000	10% DISCOUNT TO BIS
Cl 11(Workmanship)	-	100	-
Cl 12(Length, Width & Thickness)	-	2000	10% DISCOUNT TO BIS
Cl. 8.2 Table 3(Elongation)	-	1000	10% DISCOUNT TO BIS
Cl. 8.2 Table 3(Yield Stress)	-	1000	10% DISCOUNT TO BIS
7(Chemical Composition)	-	2500	10% DISCOUNT TO BIS
Cl 8(UTM)	-	1000	-
Cl 9(Press)	-	2000	-
Cl 11(Workmanship)	-	100	-
Cl 12(Length, Width & Thickness)	-	2000	-
Cl. 8.2 Table 3(Elongation)	-	1000	-
Cl. 8.2 Table 3(Yield Stress)	-	1000	-
7(Chemical Composition)	-	2500	-
Cl 13(Workmanship)	-	300	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13397

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 6603 (2001)

Stainless steel bars and flats - Specification (First Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	400	-
Cl.14.1(Corrosion Resistance- IS 10461(Part1))	-	1000	-
Cl.14.1(Corrosion Resistance- IS 10461(Part2))	-	900	-
6(Freedom from defects:)	-	100	-
9.1, Table 3(0.2 Percent Proof Stress, MPa)	-	500	-
9.2, Table 3(Tensile Strength, MPa)	-	500	-
9.3, Table 3(Elongation ,Percent)	-	500	-
9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1)	-	1000	-
9.5, Table 3(Charpy Impact Test, J-IS 1499)	-	3000	-
12(Diameter, mm)	-	200	-
12(Out of Round , mm)	-	200	-
12(Length , mm)	-	200	-
12(Variation in Straightness)	-	200	-
12(Dimensions & Tolerances, mm-IS 6603)	-	200	-
Cl. 9.3 Table 3(Bend Test)	-	500	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Nickel -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Chromium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Molybdenum- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	200	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Niobium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	100	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1(Others (Nitrogen)- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-	400	-
Cl.14.1(Corrosion Resistance- IS 10461(Part1))	-	1000	-
Cl.14.1(Corrosion Resistance- IS 10461(Part2))	-	900	-
6(Freedom from defects:)	-	100	-
9.1, Table 3(0.2 Percent Proof Stress, MPa)	-	500	-
9.2, Table 3(Tensile Strength, MPa)	-	500	-
9.3, Table 3(Elongation ,Percent)	-	500	-
9.4, Table 3(Annealed Hardness, HB-IS 1500: Pt 1)	-	1000	-
9.5, Table 3(Charpy Impact Test, J-IS 1499)	-	3000	-
12(Diameter, mm)	-	200	-
12(Out of Round , mm)	-	200	-
12(Length , mm)	-	200	-
12(Variation in Straightness)	-	200	-
12(Dimensions & Tolerances, mm-IS 6603)	-	200	-
Cl. 9.3 Table 3(Bend Test)	-	500	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13398

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 6528 (1995)

Stainless steel wire - Specification (First Revision)

15375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Workmanship)	-	100	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nitrogen)	-	500	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Titanium)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Vanadium)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Boron)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Copper)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Molybdenum)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nickel)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Chromium)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Aluminium)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Silicon)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Manganese)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Phosphorous)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Sulphor)	-	200	15% DISCOUNT TO BIS
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Carbon)	-	200	15% DISCOUNT TO BIS
Cl 10(UTM)	-	9375	15% DISCOUNT TO BIS
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	15% DISCOUNT TO BIS
Cl 6(Workmanship)	-	100	15% DISCOUNT TO BIS
Cl 10(UTM)	-	9375	15% DISCOUNT TO BIS
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	15% DISCOUNT TO BIS
Cl 6(Workmanship)	-	100	15% DISCOUNT TO BIS
Cl 10(UTM)	-	9375	15% DISCOUNT TO BIS
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	15% DISCOUNT TO BIS
10.2(Reverse bend test-IS 1716)	-	800	15% DISCOUNT TO BIS
10.3(Torsion test- IS 1717)	-	800	15% DISCOUNT TO BIS
10.4(Wrapping test-IS 1755)	-	900	15% DISCOUNT TO BIS
Table 7(Workmanship)	-	100	15% DISCOUNT TO BIS
Cl 6(Workmanship)	-	100	15% DISCOUNT TO BIS
Cl 10(UTM)	-	9375	15% DISCOUNT TO BIS
Cl 9.1 & Table 3(Diameter & Out Of Round)	-	500	15% DISCOUNT TO BIS
10.2(Reverse bend test-IS 1716)	-	800	15% DISCOUNT TO BIS
10.3(Torsion test- IS 1717)	-	800	15% DISCOUNT TO BIS
10.4(Wrapping test-IS 1755)	-	900	15% DISCOUNT TO BIS
Table 7(Workmanship)	-	100	15% DISCOUNT TO BIS

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13399

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

GROUP- I, II, III, IV, V

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Classification Heavy/Medium/L:ight)	-	250	-
4(Material)	-	1500	-
5.1(The utensil shall be pressed or spun from one piece)	-	250	-
5.2( Body Thickness of the thinnest part of the finished utensil, mm Not declared )	-	250	-
5.2(Lid Thickness of the finished utensil, mm)	-	250	-
6.1 & Table 1( i) Name of Utensil )	-	250	-
6.1 & Table 1(ii) Shape of Utensil)	-	250	-
6.1 & Table 1( Nominal Size, mm)	-	250	-
6.1 & Table 1(Inside dia, Φ D mm Not declared )	-	250	-
6.1 & Table 1(Outside dia Ф NA)	-	250	-
6.1 & Table 1(Height NA)	-	250	-
6.1 & Table 1(Capacity, l NA)	-	500	-
6.1( Minimum sheet thickness for nominal size )	-	500	-
7.1(HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-	1000	-
7.2(Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-	1000	-
8.1(The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-	250	-
8.2(The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-	250	-
8.4.1.2( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.)	-	250	-
8.4.2(A coating of thickness 25 to 100 microns is generally required)	-	250	-
8.4.3(Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface)	-	500	-
8.4.4(The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. )	-	500	-
8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible)	-	500	-
9(The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils)	-	500	-
10(Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. )	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Nitrogen of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Titanium of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Vanadium of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Boron of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Copper of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Molybdenum of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Nickel of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Chromium of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Aluminium of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Silicon of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Manganese of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Phosphorous of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Sulphor of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Carbon of IS 6911)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Titanium of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Chromium of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Zinc of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Manganese of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Iron of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Silicon of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Magnesium of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Copper of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Aluminium of IS 737)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Titanium / other Grain of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Chromium of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Zinc of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Manganese of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Iron of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Silicon of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Magnesium of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Copper of IS 21)	-	500	-
( Clauses 4, 4.1, 4.2 and 4.3)(Aluminium of IS 21)	-	500	-
Clause 3.1.3, Table 2(Minimum Thickness at the bottom)	-	500	-
Clause 3.1.3, Table 2(Minimum Thickness of wall at top edge)	-	250	-
Clause 3.1.3, Table 2(Minimum Cover Thickness)	-	250	-
Clause 8.6.1(Performance test)	-	1000	-
Clause 8.6.2(Ground Nut Oil Test for Leakage)	-	500	-
0.5(Fabrication)	-	250	-
5.4(Qualitative and Anodized Coating)	-	250	-
5.5(Qualitative and Anodized Coating)	-	250	-
8.3(Anodized Coating)	-	250	-
8.5(Plastic Coating)	-	250	-

15 Aug, 2028

-
-

13400

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 2347 (2017)

Domestic pressure cooker - Specification (Sixth Revision)

GROUP I, II & III

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	750	-
8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-	750	-
8.5(Bursting Pressure Test)	-	1000	-
8.4(Test for Safety Pressure Relief Device)	-	750	-
8.3(Operating Test for Pressure Regulating Device)	-	750	-
8.2(Proof Pressure Test)	-	750	-
8.1(Air Pressure Test)	-	750	-
7.4(WORKMANSHIP AND FINISH)	-	250	-
7.3(WORKMANSHIP AND FINISH)	-	250	-
7.2(WORKMANSHIP AND FINISH)	-	250	-
7.1(WORKMANSHIP AND FINISH)	-	250	-
6.4.1.1(Handles and Knobs)	-	4500	-
6.4.1(Handles and Knobs)	-	2500	-
6.3.1(Temperature Responsive Pressure Relief Device)	-	750	-
6.2.2(Safety Relief Device)	-	750	-
6.2.1(Safety Relief Device)	-	750	-
6.1.5(Pressure Regulating Device)	-	750	-
6.1.4(Pressure Regulating Device)	-	750	-
6.1.3(Pressure Regulating Device)	-	750	-
6.1.2(Pressure Regulating Device)	-	750	-
6.1.1(Pressure Regulating Device)	-	750	-
6(CONSTRUCTION)	-	250	-
5.7(Vent Pipe)	-	250	-
5.6(Vent Seal Pin for Pressure Regulating Device)	-	500	-
5.5(Pressure Regulating Device)	-	750	-
5.2(Safety Relief Device)	-	750	-
4.1(Capacity)	-	500	-
8.14(3 Ply Construction Cooker Body)	-	1500	-
8.12(Internal Coating)	-	1000	-
8.11(External Coating )	-	1000	-
8.10 NOTES (3)(Handles of the cooker - Proof Pressure)	-	250	-
8.10 NOTES (4)(Handles of the cooker)	-	2500	-
8.10 NOTES (5)(Handles of the cooker)	-	250	-
8.10 NOTES (6)(Handles of the cooker)	-	500	-
8.10 (a)(Handles of the cooker- Resistance to Burning)	-	250	-
8.10 (b)(Handles of the cooker- Heat Resistance)	-	1500	-
8.10 (c)(Handles of the cooker- Torque Strength)	-	1500	-
8.10 (d)(Handles of the cooker- Bending Strength)	-	1500	-
8.10 (e)(Handles of the cooker- Fatigue Resistance)	-	1500	-
8.10 (f)(Handles of the cooker- Thermal Insualtion Test)	-	1500	-
8.4 Annex H-1.1(Test for SPRD - For Destructible Devices )	-	1000	-
8.4 Annex H-1.2(Test for SPRD - For Resettable Devices )	-	1000	-
5.8(Vent Pipe Nut)	-	1000	-
5.1.1(Body, Lid, Containers and Grid)	-	1000	-
5.1.2(Body, Lid, Containers and Grid)	-	1000	-
5.1.3(Body, Lid, Containers and Grid)	-	1000	-
5.1.4(Body, Lid, Containers and Grid)	-	1000	-
5.3(Gasket)	-	1500	-
5.4(Handles and Knobs)	-	1000	-

15 Aug, 2028

-
for all grades except "for pressure cooker operated by spring loaded mechanism test"

13401

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 740 (1977)

Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (Second Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1, Table 1of IS:740 (Designation & Condition 65032, 'W')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 64430, 'W')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 24345, 'W')(Tensile Strength of Size upto and including 12 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 19000, '112')(Tensile Strength of Size upto and including 12 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation 65032)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Either Cr or Mn shall present)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Copper)	-	500	-
6(Freedom From Defects)	-	250	-
7(Dmension And Tolerances)	-	250	-
9.2(Head Forming Test)	-	250	-
11(Marking)	-	250	-

15 Aug, 2028

-
-

13402

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 13395 (2021)

Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General)	-	500	-
5.2(Bending Strength)	-	2500	-
5.3(Torque Strength)	-	2500	-
5.4(Impact Strength)	-	2000	-
5.5(Fatigue Resistance)	-	2000	-
5.6(Leakage)	-	2000	-
5.7(Thermal Insulation)	-	1500	-
5.8(Heat Resistance)	-	2500	-
5.9(Washing Resistance)	-	2000	-
5.1(Burning Resistance)	-	1500	-
5.1(General)	-	500	-
5.2(Bending strength)	-	2500	-
5.3(Torque strength)	-	2500	-
5.4(Impact strength)	-	2000	-
5.5(Fatigue resistance)	-	2000	-
5.6(Leakage)	-	2000	-
5.7(Thermal insulation)	-	1500	-
5.8(Heat resistance)	-	2500	-
5.9(Washing resistance)	-	2000	-
5.10(Burning resistance)	-	1500	-
4.1(Construction)	-	250	-
4.2(Materials)	-	250	-
4.3(Selection and Size)	-	250	-
4.4(Position of handle and knob with respect to cookware)	-	250	-
4.5(Attachment to cookware)	-	250	-

15 Aug, 2028

-
-

13403

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 7466 (1994)

Rubber gaskets for pressure cookers - Specifications (First Revison)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Workmanship and Finish )	-	500	-
3.4-Table 1(i)(Requirements of Rubber Used for Gaskets-Hardness IRHD)	-	1000	-
3.4-Table 1(ii)(Requirements of Rubber Used for Gaskets-Tensile strength,)	-	1500	-
3.4-Table 1(iii)(Requirements of Rubber Used for Gaskets-Elongation at break)	-	1000	-
3.4-Table 1(iv-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing 3 days in Aie-oven Change From Original Value))	-	2500	-
3.4-Table 1(iv-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing 3 days in Aie-oven Change From Original Value))	-	2500	-
3.4-Table 1(iv-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing 3 days in Aie-oven Change From Original Value))	-	1500	-
3.4-Table 1(v-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing in an autoclave Change From Original Value))	-	500	-
3.4-Table 1(v-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing in an autoclave Change From Original Value))	-	1500	-
3.4-Table 1(v-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing in an autoclave Change From Original Value))	-	1000	-
3.4-Table 1(vi)(Compression set)	-	2000	-
3.5-ANNEX C(PERFORMANCE TEST FOR PRESSURE COOKER )	-	2500	-
Clause 4.3 Table 1(Zinc oxide)	-	1500	-
Clause 3.4 Table 1(Heavy metal content)	-	1500	-
3.4. and Table 1 v) d(Requirements of Rubber Used for Gaskets-Volume(After ageing in an autoclave Change From Original Value))	-	1500	-
4.2(Marking)	-	250	-

15 Aug, 2028

-
-

13404

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.12(Corrosion Resistance- IS 10461(Part1))	-	1000	-
6(Freedom from defects , IS 6911)	-	250	-
10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1))	-	1000	-
10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-	750	-
10.3(Bend Test - IS 1599)	-	500	-
11,Table 7(Erichsen cupping test-IS 10175)	-	750	-
15(Surface Finish)	-	250	-
10.1 Amd 2(Yeild Strength)	-	500	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	500	-
10.1 Amd 2(Elongation)	-	500	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	500	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	500	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	500	-
Clause 17 , Table 9 to Table 19(Flatness)	-	300	-
Clause 17 , Table 9 to Table 19(Camber)	-	300	-
4(Supply of Material)	-	250	-
8(Heat Treatment)	-	250	-
19(Marking)	-	250	-

15 Aug, 2028

-
-

13405

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 7809 : Part 3 : Sec 1 (1986)

Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	250	-
Cl.No.3.2(Width)	-	500	-
Cl.No.3.3(Length)	-	500	-
Cl.No.3.4(Thickness)	-	500	-
Cl.No.4.1(Tensile Strength)	-	1500	-
Cl.No.4.2(Adhesion to Steel)	-	1500	-
Cl.No.4.3(Adhesion to backing)	-	1500	-
Cl.No.4.4(Electric Strength at RT)	-	2500	-
Cl.No.4.5(Electric Strength after Humid Conditioning)	-	2500	-
Cl.No.4.6(Flammability)	-	1500	-
4.7(Electrolytic corrosion)	-	4500	-
4.8(Stability to accelerated ageing )	-	4000	-
Cl.No.4.9(Insulation Resistance)	-	2500	-
Cl.No.4 of IS 7809 (Part 1)-1975(Appearance)	-	500	-
Cl.No.5 of IS 7809 (Part 1)-1975(Freedom From Deffects)	-	500	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	200	-

15 Aug, 2028

-
-

13406

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Marking)	-	250	-
8(Marking)	-	250	-
8.9(Marking)	-	250	-
7(Classification)	-	250	-
10(Protection against Electric Shock)	-	250	-
11.1(Provision for earthing)	-	250	-
12(Terminals)	-	250	-
12.2.2(Connection of conductor)	-	250	-
12.2.3(Mechanical strength of terminals)	-	500	-
12.2.4(Resistance to corrosion)	-	500	-
12.2.5(Undue damage to conductor)	-	500	-
12.2.7(Insertion of conductor)	-	250	-
12.2.9(Locking against accidental loosening)	-	250	-
12.2.11(Distance between screw and conductor)	-	250	-
12.3.2(Screwless terminals)	-	250	-
12.3.3(Connectin of conductor)	-	250	-
12.3.4(Material of terminals)	-	250	-
12.3.5(Clamping)	-	250	-
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	250	-
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	1000	-
12.3.12(vii) Deflection Stresses [Cl. 12.3.12])	-	1000	-
13.1(a) Insulating lining, barriers and the like [Cl 13.1])	-	500	-
13.2(b) Construction of switch [Cl 13.2])	-	250	-
13.2(i) Installation Test)	-	250	-
13.3(c) Covers,cover plates and actuating members [Cl 13.3])	-	250	-
13.4(d) Ordinary switches [Cl 13.4])	-	250	-
13.5(e) Rotary switches [Cl 13.5])	-	250	-
13.6(f) Screws and other means [Cl 13.6])	-	250	-
13.7(g) Combination of switches or switches and socket outlets [Cl 13.7])	-	250	-
13.8(h) Assessories combined with switches [Cl. 13.8])	-	250	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	250	-
13.1(k) Switches to be installed in a box [Cl. 13.10])	-	250	-
13.11(l) Surface type switches other than ordinary switch [Cl. 13.11])	-	250	-
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	250	-
15.1(Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-	1000	-
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	1000	-
15.3(c) Resistance to Humidity [Cl. 15.3])	-	1000	-
16.1(Insulation resistance [Cl. 16.1])	-	1000	-
17(Temperature- rise [Cl. 17])	-	1000	-
16.2( Electric Strength [Cl. 16.2])	-	1000	-
18(Marking and breaking Capacity[Cl. 18])	-	1000	-
19(Normal Operation [Cl. 19] a) General & Operation)	-	1000	-
14.3(d)Test for arcing and sparking [Cl 14.3])	-	500	-
21(Resistance to Heat [Cl.21])	-	750	-
22(Screw, Current Carrying Part And Connection [Cl.22])	-	500	-
22.1(i) Screw & Nuts [Cl.22.1])	-	500	-
22.4(ii) Screw & rivets [Cl . 22.4])	-	500	-
22.3(iii) Electrical Connections [Cl.22.3])	-	500	-
23.2(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	750	-
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	1500	-
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	1500	-
25 of IS 3854 : 1997(Resistance to rusting)	-	1000	-
11.3(Provision for earthing)	-	1000	-
16.3(Flash test)	-	750	-
20.8(Mechanical Strength Test)	-	500	-
20.7(Mechanical Strength Test)	-	500	-
22.2(Measurement and manual test)	-	250	-
22.6(Inspection and chemical analysis)	-	250	-
16.3(Insulation resistance and electric strength )	-	750	-
13.12, 13.13, 13.14(m) Inlet opening [Cl. 13.12.13.13 & 13.14])	-	750	-
14(Mechanism [Cl. 14])	-	750	-
12.2.6(Terminals, Qualitative)	-	250	-
12.3.1(Terminals, Qualitative)	-	250	-
12.3.6(Terminals, Qualitative)	-	250	-
12.3.10(Terminals, Qualitative)	-	250	-
13.12(Qualitative)	-	250	-

15 Aug, 2028

-
Upto 16 Amp. Excluding AX type

13407

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	100	-
7.1.1(Accessories Classification)	-	100	-
7.1.2(Accessories Classification)	-	100	-
7.1.3(Accessories Classification)	-	100	-
7.1.4(Accessories Classification)	-	100	-
7.1.5(Accessories Classification)	-	100	-
7.2.1(Socket-Outlets Classification)	-	100	-
7.2.2(Socket-Outlets Classification)	-	100	-
7.2.3(Socket-Outlets Classification)	-	100	-
7.2.4(Socket-Outlets Classification)	-	100	-
7.3(Plug Classification)	-	100	-
8.1(MARKING)	-	500	-
8.8(MARKING)	-	500	-
8.9(MARKING)	-	500	-
9.1(CHECKING OF DIMENSIONS)	-	500	-
9.2(CHECKING OF DIMENSIONS)	-	500	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
11.1(PROVISIONS FOR EARTHING)	-	500	-
11.2(PROVISIONS FOR EARTHING)	-	500	-
11.3(PROVISIONS FOR EARTHING)	-	500	-
11.4(PROVISIONS FOR EARTHING)	-	500	-
11.5(PROVISIONS FOR EARTHING)	-	500	-
11.6(PROVISIONS FOR EARTHING)	-	500	-
12.1.1(TERMINALS)	-	250	-
12.1.2(TERMINALS)	-	250	-
12.2.1(TERMINALS)	-	250	-
12.2.2(TERMINALS)	-	250	-
12.2.3(TERMINALS)	-	250	-
12.2.4(TERMINALS)	-	250	-
12.2.5(TERMINALS)	-	250	-
12.2.6(TERMINALS)	-	250	-
12.2.7(TERMINALS)	-	250	-
12.2.8(TERMINALS)	-	250	-
12.2.9(TERMINALS)	-	250	-
12.3.1(TERMINALS)	-	250	-
12.3.11(TERMINALS)	-	250	-
12.3.2(TERMINALS)	-	250	-
12.3.3(TERMINALS)	-	250	-
12.3.4(TERMINALS)	-	250	-
12.3.5(TERMINALS)	-	250	-
12.3.6(TERMINALS)	-	250	-
12.3.7(TERMINALS)	-	250	-
12.3.8(TERMINALS)	-	250	-
12.3.9(TERMINALS)	-	250	-
12.3.10(TERMINALS)	-	250	-
12.3.12(TERMINALS)	-	250	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
15(INTERLOCKED SOCKET-OUTLETS)	-	100	-
16.1(RESISTANCE TO AGEING,)	-	500	-
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1000	-
16.3(Resistance to Humidity)	-	1000	-
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1000	-
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1000	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1000	-
18(OPERATION OF EARTHING CONTACTS)	-	500	-
19(TEMPERATURE RISE)	-	1000	-
20(BREAKING CAPACITY)	-	1500	-
21(NORMAL OPERATION)	-	1500	-
22.1(Verification of the Maximum Withdrawal Force)	-	500	-
22.2(Verification of Minimum Withdrawal Force)	-	500	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	500	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	500	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	500	-
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	500	-
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	500	-
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	500	-
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	500	-
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	500	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-	500	-
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	500	-
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	500	-
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	500	-
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	500	-
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	500	-
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	500	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	500	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	500	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	500	-
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	500	-
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	500	-
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	500	-
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	500	-
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	500	-
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	500	-
24.15(MECHANICAL STRENGTH )	-	1000	-
24.16(MECHANICAL STRENGTH )	-	1000	-
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	1000	-
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	1000	-
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	1000	-
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	1000	-
25.4(RESISTANCE TO HEAT )	-	1000	-
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	500	-
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1000	-
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1000	-
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	1000	-
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	1000	-
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	1000	-
29(RESISTANCE TO RUSTING)	-	1000	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	1000	-
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	1000	-
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	1000	-
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	1000	-

15 Aug, 2028

-
-

13408

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	1000	-
8.2, Table 3(Proof Stress, N/mm2)	-	1000	-
8.2, Table 3(Elongation, %)	-	500	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	1000	-
8.4(Bend Test)	-	200	-
8.5(Erichsen Cupping Test)	-	1800	-
10.1(Thickness, mm)	-	300	-
10.2(width, mm)	-	300	-
10.3(Length, mm)	-	200	-
10.4(Flatness,mm)	-	200	-
10.5(Camber, mm)	-	1000	-
11(Surface Finish)	-	75	-
Cl . 6 .0(Freedom from defect)	-	25	-
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	1000	-
8.2, Table 3(Proof Stress, N/mm2)	-	1000	-
8.2, Table 3(Elongation, %)	-	500	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	1000	-
8.4(Bend Test)	-	200	-
8.5(Erichsen Cupping Test)	-	1800	-
10.1(Thickness, mm)	-	300	-
10.2(width, mm)	-	300	-
10.3(Length, mm)	-	200	-
10.4(Flatness,mm)	-	200	-
10.5(Camber, mm)	-	1000	-
11(Surface Finish)	-	75	-
Cl . 6 .0(Freedom from defect)	-	25	-

31 Dec, 2029

-
Included w.e.f. 07.11.2023

13409

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

Class I, II, III

95000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	250	-
6.2.1 Annex B(Chloride Content of Resin)	-	2500	-
6.3(Compound Properties)	-	10000	-
6.3.1 Annex B(Chloride content)	-	2500	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	5000	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	100	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	1000	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	1000	-
7.1.3 (Effective length)	-	1000	-
8(Pipe Ends)	-	1000	-
9.1(Visual Appearance)	-	500	-
9.2 IS 12235 (Part 3)(Opacity)	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	1500	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1500	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1500	-
9.6 IS 12235(Part 14)(Density)	-	1500	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	30000	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	45000	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	2500	-
10.4 IS 12235(Part 19)(Flattening Test)	-	1500	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	2500	-
6.3.3(Density)	-	1000	-

15 Aug, 2028

-
-

13410

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

8100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	100	15% DISCOUNT TO BIS
6.1(Manganese %)	-	100	15% DISCOUNT TO BIS
6.1(Phosphorus %)	-	100	15% DISCOUNT TO BIS
6.1(Sulphur %)	-	100	15% DISCOUNT TO BIS
6.1(Silicon %)	-	100	15% DISCOUNT TO BIS
6.1( Copper %)	-	100	15% DISCOUNT TO BIS
6.1( Aluminium %)	-	100	15% DISCOUNT TO BIS
6.1( Nb)	-	100	15% DISCOUNT TO BIS
6.1(V)	-	100	15% DISCOUNT TO BIS
6.1( Ti)	-	100	15% DISCOUNT TO BIS
6.1(Cr)	-	100	15% DISCOUNT TO BIS
6.1(Mo)	-	100	15% DISCOUNT TO BIS
6.1(Ni)	-	100	15% DISCOUNT TO BIS
6.1( Nitrogen%)	-	1300	15% DISCOUNT TO BIS
Cl.13(Out of square)	-	300	15% DISCOUNT TO BIS
Cl.13(Flatness)	-	200	15% DISCOUNT TO BIS
Cl.13(Camber)	-	200	15% DISCOUNT TO BIS
Cl.13(Width)	-	200	15% DISCOUNT TO BIS
Cl.13(Thickness)	-	200	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	500	15% DISCOUNT TO BIS
Cl 13(Length, Width & Thickness)	-	500	15% DISCOUNT TO BIS
Cl 12(Workmanship)	-	200	15% DISCOUNT TO BIS
Cl 10(Die Press)	-	400	15% DISCOUNT TO BIS
9(Bend test)	-	500	15% DISCOUNT TO BIS
14(Calculation of weight)	-	200	15% DISCOUNT TO BIS
8, Table 5 & 6(Tensile Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Yield Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Elongation)	-	500	15% DISCOUNT TO BIS
Clause 10(Cuppping Test)	-	400	15% DISCOUNT TO BIS
Clause 12(Freedom from defect)	-	200	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(Boron)	-	100	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	100	15% DISCOUNT TO BIS
6.1(Carbon %)	-	100	15% DISCOUNT TO BIS
6.1(Manganese %)	-	100	15% DISCOUNT TO BIS
6.1(Phosphorus %)	-	100	15% DISCOUNT TO BIS
6.1(Sulphur %)	-	100	15% DISCOUNT TO BIS
6.1(Silicon %)	-	100	15% DISCOUNT TO BIS
6.1( Copper %)	-	100	15% DISCOUNT TO BIS
6.1( Aluminium %)	-	100	15% DISCOUNT TO BIS
6.1( Nb)	-	100	15% DISCOUNT TO BIS
6.1(V)	-	100	15% DISCOUNT TO BIS
6.1( Ti)	-	100	15% DISCOUNT TO BIS
6.1(Cr)	-	100	15% DISCOUNT TO BIS
6.1(Mo)	-	100	15% DISCOUNT TO BIS
6.1(Ni)	-	100	15% DISCOUNT TO BIS
6.1( Nitrogen%)	-	1300	15% DISCOUNT TO BIS
Cl.13(Out of square)	-	300	15% DISCOUNT TO BIS
Cl.13(Flatness)	-	200	15% DISCOUNT TO BIS
Cl.13(Camber)	-	200	15% DISCOUNT TO BIS
Cl.13(Width)	-	200	15% DISCOUNT TO BIS
Cl.13(Thickness)	-	200	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	500	15% DISCOUNT TO BIS
Cl 13(Length, Width & Thickness)	-	500	15% DISCOUNT TO BIS
Cl 12(Workmanship)	-	200	15% DISCOUNT TO BIS
Cl 10(Die Press)	-	400	15% DISCOUNT TO BIS
9(Bend test)	-	500	15% DISCOUNT TO BIS
14(Calculation of weight)	-	200	15% DISCOUNT TO BIS
8, Table 5 & 6(Tensile Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Yield Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Elongation)	-	500	15% DISCOUNT TO BIS
Clause 10(Cuppping Test)	-	400	15% DISCOUNT TO BIS
Clause 12(Freedom from defect)	-	200	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(Boron)	-	100	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	100	15% DISCOUNT TO BIS
6.1(Carbon %)	-	100	15% DISCOUNT TO BIS
6.1(Manganese %)	-	100	15% DISCOUNT TO BIS
6.1(Phosphorus %)	-	100	15% DISCOUNT TO BIS
6.1(Sulphur %)	-	100	15% DISCOUNT TO BIS
6.1(Silicon %)	-	100	15% DISCOUNT TO BIS
6.1( Copper %)	-	100	15% DISCOUNT TO BIS
6.1( Aluminium %)	-	100	15% DISCOUNT TO BIS
6.1( Nb)	-	100	15% DISCOUNT TO BIS
6.1(V)	-	100	15% DISCOUNT TO BIS
6.1( Ti)	-	100	15% DISCOUNT TO BIS
6.1(Cr)	-	100	15% DISCOUNT TO BIS
6.1(Mo)	-	100	15% DISCOUNT TO BIS
6.1(Ni)	-	100	15% DISCOUNT TO BIS
6.1( Nitrogen%)	-	1300	15% DISCOUNT TO BIS
Cl.13(Out of square)	-	300	15% DISCOUNT TO BIS
Cl.13(Flatness)	-	200	15% DISCOUNT TO BIS
Cl.13(Camber)	-	200	15% DISCOUNT TO BIS
Cl.13(Width)	-	200	15% DISCOUNT TO BIS
Cl.13(Thickness)	-	200	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	500	15% DISCOUNT TO BIS
Cl 13(Length, Width & Thickness)	-	500	15% DISCOUNT TO BIS
Cl 12(Workmanship)	-	200	15% DISCOUNT TO BIS
Cl 10(Die Press)	-	400	15% DISCOUNT TO BIS
9(Bend test)	-	500	15% DISCOUNT TO BIS
14(Calculation of weight)	-	200	15% DISCOUNT TO BIS
8, Table 5 & 6(Tensile Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Yield Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Elongation)	-	500	15% DISCOUNT TO BIS
Clause 10(Cuppping Test)	-	400	15% DISCOUNT TO BIS
Clause 12(Freedom from defect)	-	200	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(Boron)	-	100	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	100	15% DISCOUNT TO BIS

31 Dec, 2029

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number