BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15612 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

13501

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

Water for Construction Purpose,Compressive strength fo

2500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Average Compressive Strength)	-	2500	-
16.1(Average Compressive Strength)	-	2500	-
Cl 5.4 .2(pH)	-	300	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	300	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	300	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	300	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	300	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	1100	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	1100	-
16.1(Average Compressive Strength)	-	2500	-
Cl 5.4 .2(pH)	-	300	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	300	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	300	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	300	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	300	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	1100	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	1100	-
Cl 5.4 Table 1 (iv)(Chloride)	-	300	-

04 Dec, 2028

-
Included w.e.f. 21-09-2022.

13502

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 410 (1977)

Specification for cold rolled brass sheet, strip and foil (Third Revision)

Annealed, Quarter Hard, Half Hard, Hard, Extra Hard, Sp

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Tensile Test)	-	2000	For tensile and elongation test
Table-2(Vickers Hardness)	-	500	-
6.1 Table-1(Cu)	-	2000	-
Table-2(Thickness)	-	750	-
6.1 Table-1(Pb)	-	2000	-
6.1 Table-1(Fe)	-	2000	-
6.1 Table-1(Total impurities including iron)	-	2000	-
6.1 Table-1(Zn)	-	2000	-
4.0(Freedom from defects)	-	2000	-
Table-2(Elongation)	-	2000	For tensile and elongation test

04 Dec, 2028

-
Included w.e.f. 21-09-2022.

13503

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 16176 (2014)

Ratchet pipe threader for taper pipe threads (R - Series) - Specification

.½” to 6”

13700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	9000	For complete dimensional and qualitative tests.
6.2(Hardness)	-	700	-
9.1(Performance of thread testing)	-	4000	For complete thread parameters testing
4(Dimensions)	-	9000	For complete dimensional and qualitative tests.
6.2(Hardness)	-	700	For Hardness Test
9.1(Performance of thread testing)	-	4000	For complete thread parameters testing
7(Workmanship & Finish)	-	9000	For complete dimensional and qualitative tests.
5(Materials)	-	3500	For complete chemical tests (if required)
9.4(Measurement of gauging of threads)	-	4000	For complete gauging parameters test
9.3(Measurement of length of external thread)	-	4000	For complete gauging parameters test
9.2(Cutting of threads on a pipe testing)	-	4000	For complete gauging parameters test
6.3(To check the functioning of ratchet handle by rotating the locking pin 180°.)	-	9000	For complete dimensional and qualitative tests.
6.1(Manufacturing Quality (Visual))	-	9000	For complete dimensional and qualitative tests.
4(Dimensions)	-	-	-
6.2(Hardness)	-	-	-
9.1(Performance of thread testing)	-	-	-
7(Workmanship & Finish)	-	-	-
5(Materials)	-	-	-
9.4(Measurement of gauging of threads)	-	-	-
9.3(Measurement of length of external thread)	-	-	-
9.2(Cutting of threads on a pipe testing)	-	-	-
6.3(To check the functioning of ratchet handle by rotating the locking pin 180°.)	-	-	-
6.1(Manufacturing Quality (Visual))	-	-	-

04 Dec, 2028

-
Included w.e.f. 21-09-2022.

13504

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

Annealed (Soft)(O),Half Hard(HB) and Hard (HD),GR 1,GR2

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Dimension and Tolerances)	-	2500	For complete dimension and qualitative tests.
9.1 Table-2(Tensile Strength)	-	2500	-
9.2(Vickers Hardness)	-	2500	-
8.1 Table 1(Cu)	-	3000	For complete chemical tests
8.1 Table 1(Pb)	-	3000	For complete chemical tests
8.1 Table 1(Fe)	-	3000	-
8.1 Table 1(Total other impurities excluding iron)	-	3000	For complete chemical tests
8.1 Table 1(Zn)	-	3000	For complete chemical tests
10.1(Mercurous Nitrate Test)	-	3000	For complete chemical tests
5.0(Freedom from defects)	-	2500	For complete dimension and qualitative tests.

04 Dec, 2028

-
Included w.e.f. 21-09-2022.

13505

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS/IEC 60730 : Part 2 : Sec 9 (2011)

Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing Controls

81500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	400	10 % Discount for BIS
9(By inspection)	-	400	10 % Discount for BIS
9.1.1(By inspection)	-	400	10 % Discount for BIS
9.1.2(By inspection)	-	400	10 % Discount for BIS
9.1.3(By inspection)	-	400	10 % Discount for BIS
9.2(By inspection)	-	400	10 % Discount for BIS
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	400	10 % Discount for BIS
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	10 % Discount for BIS
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	10 % Discount for BIS
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	10 % Discount for BIS
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	10 % Discount for BIS
9.4(by inspection and by plating)	-	400	10 % Discount for BIS
9.4.1(by inspection)	-	400	10 % Discount for BIS
9.4.2(by inspection)	-	400	10 % Discount for BIS
9.5.1(by inspection)	-	400	10 % Discount for BIS
9.5.2(by inspection)	-	400	10 % Discount for BIS
10.1.1(By inspection and as per IEC 60988-2-2)	-	400	10 % Discount for BIS
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	400	10 % Discount for BIS
10.1.2(By inspection )	-	400	10 % Discount for BIS
10.1.3(By inspection )	-	400	10 % Discount for BIS
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	400	10 % Discount for BIS
10.1.5(By measurement)	-	400	10 % Discount for BIS
10.1.5.1(by inspection, by measurement, by torque test)	-	400	10 % Discount for BIS
10.1.6(by inspection after cl 10.1.5)	-	400	10 % Discount for BIS
10.1.7(by inspection)	-	400	10 % Discount for BIS
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	400	10 % Discount for BIS
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	400	10 % Discount for BIS
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	400	10 % Discount for BIS
10.1.11(By inspection)	-	400	10 % Discount for BIS
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	400	10 % Discount for BIS
10.1.13(By inspection and after the test of cl 17)	-	400	10 % Discount for BIS
10.1.14(By inspection)	-	400	10 % Discount for BIS
10.1.15(Figure 11 or 12)	-	400	10 % Discount for BIS
10.2(By inspection)	-	400	10 % Discount for BIS
10.2.1(Table 10.2.1)	-	400	10 % Discount for BIS
10.2.2(By inspection)	-	400	10 % Discount for BIS
10.2.3(By inspection)	-	400	10 % Discount for BIS
10.2.4.1(Figure 14 or 15)	-	400	10 % Discount for BIS
10.2.4.2(During the test of cl 14)	-	400	10 % Discount for BIS
10.2.4.3(As per table 10.2.4.3)	-	400	10 % Discount for BIS
10.2.4.4(As per Figure 16)	-	400	10 % Discount for BIS
11.1(By inspection)	-	400	10 % Discount for BIS
11.1.1(By inspection)	-	400	10 % Discount for BIS
11.1.2(by inspection and by analysis of the material)	-	400	10 % Discount for BIS
11.1.3(by inspection)	-	400	10 % Discount for BIS
11.2(by inspection and by test)	-	400	10 % Discount for BIS
11.2.2(by inspection, by measurement and/or by manual test)	-	400	10 % Discount for BIS
11.2.3(by inspection, by measurement and/or by manual test)	-	400	10 % Discount for BIS
11.2.3.2(by inspection, by measurement and/or by manual test)	-	400	10 % Discount for BIS
11.2.4(as per lEC 60227 or IEC 60245.)	-	400	10 % Discount for BIS
11.2.5(As per annexure H, cl 11.2.5)	-	400	10 % Discount for BIS
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	400	10 % Discount for BIS
11.3.2(by inspection and by the tests of clauses 13)	-	400	10 % Discount for BIS
11.3.3(by inspection)	-	400	10 % Discount for BIS
11.3.4(by inspection)	-	400	10 % Discount for BIS
11.3.5(by inspection)	-	400	10 % Discount for BIS
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	400	10 % Discount for BIS
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	400	10 % Discount for BIS
11.3.8(by inspection)	-	400	10 % Discount for BIS
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	400	10 % Discount for BIS
11.4.1 (by inspection)	-	400	10 % Discount for BIS
11.4.2(by inspection)	-	400	10 % Discount for BIS
11.4.3(by the tests of clauses 15 to 17)	-	400	10 % Discount for BIS
11.4.4 to 11.4.16(As per relevent type)	-	400	10 % Discount for BIS
11.5(by inspection)	-	400	10 % Discount for BIS
11.6.1(by inspection and by manual test)	-	400	10 % Discount for BIS
11.6.2(by inspection and by manual test)	-	400	10 % Discount for BIS
11.6.3.1(By inspection)	-	400	10 % Discount for BIS
11.6.3.2(By inspection)	-	400	10 % Discount for BIS
11.6.3.3(By inspection)	-	400	10 % Discount for BIS
11.6.3.4(By inspection)	-	400	10 % Discount for BIS
11.6.3.5(By inspection)	-	400	10 % Discount for BIS
11.6.3.6(By inspection)	-	400	10 % Discount for BIS
11.6.3.7(By inspection)	-	400	10 % Discount for BIS
11.7.1(By Flexing test as per fig 9)	-	400	10 % Discount for BIS
11.7.1.2.2(By Flexing test as per fig 9)	-	400	10 % Discount for BIS
11.7.1.2.3(By Flexing test as per fig 9)	-	400	10 % Discount for BIS
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	400	10 % Discount for BIS
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	400	10 % Discount for BIS
11.8(By inspection)	-	400	10 % Discount for BIS
11.8.1(By inspection)	-	400	10 % Discount for BIS
11.8.2(By inspection and as per table 11.8.2)	-	400	10 % Discount for BIS
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	400	10 % Discount for BIS
11.9.1(By inspection)	-	400	10 % Discount for BIS
11.9.1.1(by inspection and manual test)	-	400	10 % Discount for BIS
11.9.1.2(by inspection and manual test)	-	400	10 % Discount for BIS
11.9.1.3(by inspection and manual test)	-	400	10 % Discount for BIS
11.9.1.4(by inspection and manual test)	-	400	10 % Discount for BIS
11.10.1(by inspection)	-	400	10 % Discount for BIS
11.10.2(by inspection)	-	400	10 % Discount for BIS
11.10.3(by inspection and by test of socket-outlet system)	-	400	10 % Discount for BIS
11.11(Requirements during mounting, maintenance and servicing)	-	400	10 % Discount for BIS
11.11.1(By inspection)	-	400	10 % Discount for BIS
11.11.1.1(By inspection)	-	400	10 % Discount for BIS
11.11.1.2(By inspection)	-	400	10 % Discount for BIS
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	400	10 % Discount for BIS
11.11.1.5.4(By inspection)	-	400	10 % Discount for BIS
11.11.1.5.6(by pull test)	-	400	10 % Discount for BIS
11.11.2(By inspection)	-	400	10 % Discount for BIS
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	10 % Discount for BIS
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	10 % Discount for BIS
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	10 % Discount for BIS
11.11.4(By inspection)	-	400	10 % Discount for BIS
11.11.5(By inspection and by manual test)	-	400	10 % Discount for BIS
11.11.6(By inspection)	-	400	10 % Discount for BIS
11.11.7(By inspection)	-	400	10 % Discount for BIS
11.12(As per H, cl 11.12)	-	400	10 % Discount for BIS
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	400	10 % Discount for BIS
11.1.102(As per IEC 60216-1:2001)	-	400	10 % Discount for BIS
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	400	10 % Discount for BIS
11.4.101(as per cl 11.4.101)	-	400	10 % Discount for BIS
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	400	10 % Discount for BIS
11.4.107(As per annexure DD)	-	400	10 % Discount for BIS
11.6.3.101(As per table 7, item 117)	-	400	10 % Discount for BIS
11.101(As per annexure BB)	-	400	10 % Discount for BIS
12.1(As per IEC 60529)	-	400	10 % Discount for BIS
12.1.6.2(Torque test)	-	400	10 % Discount for BIS
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	400	10 % Discount for BIS
12.3(as per cl 12.3.1 to 12.3.7)	-	400	10 % Discount for BIS
12.101(None)	-	400	10 % Discount for BIS
12.101.2(15 K+Tmax for 16 hr)	-	400	10 % Discount for BIS
12.101.5(as per 12.103 to 12.105)	-	400	10 % Discount for BIS
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	400	10 % Discount for BIS
13.1(as per table 13.1)	-	400	10 % Discount for BIS
13.2(As per table 13.2)	-	400	10 % Discount for BIS
13.3.1 to 13.3.4(as per clause 13.3.4)	-	400	10 % Discount for BIS
14.1(As per table 14.1)	-	400	10 % Discount for BIS
14.3(As per table 14.1)	-	400	10 % Discount for BIS
14.101.1( as per cl 14.102 and 14.102.1)	-	400	10 % Discount for BIS
15(as per cl 15.1 to 15.4)	-	400	10 % Discount for BIS
15.5(as per cl 15.5 to 15.6)	-	400	10 % Discount for BIS
15.6.4(42 of table 7.2, and as per annexure AA)	-	400	10 % Discount for BIS
15.7(as per annexure J, cl 15.7)	-	400	10 % Discount for BIS
15.5.3.101 to 15.5.3.105(According to type of control)	-	400	10 % Discount for BIS
15.5.3.109( voltage specified in Table 13.2)	-	400	10 % Discount for BIS
16.2(as per cl 16.2.1 to 16.2.3 )	-	400	10 % Discount for BIS
16.2.4(test of cl 15 repeated )	-	400	10 % Discount for BIS
16.2.4(42 of table 7.2)	-	400	10 % Discount for BIS
18.1.6(By inspection)	-	400	10 % Discount for BIS
18.1.6.1(By inspection)	-	400	10 % Discount for BIS
18.1.6.2(By inspection)	-	400	10 % Discount for BIS
18.1.6.3(Pull test as per cl 18.1.6.3)	-	400	10 % Discount for BIS
18.2(Impact tester)	-	400	10 % Discount for BIS
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	400	10 % Discount for BIS
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	400	10 % Discount for BIS
18.7(Pull test as per table 18.7)	-	400	10 % Discount for BIS
18.8(as per cl 18.8.2 and 18.8.3)	-	400	10 % Discount for BIS
18.9(axial pull of 15N/30N)	-	400	10 % Discount for BIS
18.101(as per cl 18.101.2 and 101.3)	-	400	10 % Discount for BIS
18.102(Hydrualic test)	-	400	10 % Discount for BIS
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	10 % Discount for BIS
19.2.1(By inspection)	-	400	10 % Discount for BIS
19.2.2(By inspection)	-	400	10 % Discount for BIS
19.2.3(By inspection)	-	400	10 % Discount for BIS
19.2.4(By inspection)	-	400	10 % Discount for BIS
19.2.4.1(By inspection)	-	400	10 % Discount for BIS
19.2.5(By inspection)	-	400	10 % Discount for BIS
19.2.5.1(By inspection)	-	400	10 % Discount for BIS
19.2.6(By inspection)	-	400	10 % Discount for BIS
20.1(as per table 20.2)	-	400	10 % Discount for BIS
20.2.1(as per table 20.3)	-	400	10 % Discount for BIS
20.2.2(as per table 20.4)	-	400	10 % Discount for BIS
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	400	10 % Discount for BIS
21.2.7(As per cl G.4)	-	400	10 % Discount for BIS
22.1.1(As per cl 21.1.3 to 21.1.6)	-	400	10 % Discount for BIS
25(as per annexure H)	-	400	10 % Discount for BIS
27.1(as per annexure H)	-	400	10 % Discount for BIS
27.2(as per cl 27.2.1 and 27.2.2)	-	400	10 % Discount for BIS
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	400	10 % Discount for BIS
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	400	10 % Discount for BIS
10.1.7.1(by inspection)	-	400	10 % Discount for BIS
11.7.2.11 to 11.7.2.15(By measurement)	-	400	10 % Discount for BIS
5(By inspection)	-	400	10 % Discount for BIS
5.1(By inspection)	-	400	10 % Discount for BIS
5.2(By inspection)	-	400	10 % Discount for BIS
6.1(By inspection)	-	400	10 % Discount for BIS
6.2(By inspection)	-	400	10 % Discount for BIS
6.3(By inspection)	-	400	10 % Discount for BIS
6.4(By inspection)	-	400	10 % Discount for BIS
6.5(By inspection)	-	400	10 % Discount for BIS
6.5.1(IEC 60529 and by inspection)	-	400	10 % Discount for BIS
6.5.2(IEC 60529 and by inspection)	-	400	10 % Discount for BIS
6.5.3(Annexure N and by inspection)	-	400	10 % Discount for BIS
6.6(By inspection)	-	400	10 % Discount for BIS
6.7.1(By inspection)	-	400	10 % Discount for BIS
6.7.2(By inspection)	-	400	10 % Discount for BIS
6.8(By inspection)	-	400	10 % Discount for BIS
6.8.2(By inspection)	-	400	10 % Discount for BIS
6.9(Annexure H and by inspection)	-	400	10 % Discount for BIS
6.1(By inspection)	-	400	10 % Discount for BIS
6.11(By inspection)	-	400	10 % Discount for BIS
6.12(By inspection)	-	400	10 % Discount for BIS
6.13(By inspection)	-	400	10 % Discount for BIS
6.14(By inspection)	-	400	10 % Discount for BIS
6.15(Annexure J and by inspection)	-	400	10 % Discount for BIS
6.16(By inspection)	-	400	10 % Discount for BIS
6.18(Annexure H)	-	400	10 % Discount for BIS
6.17(Annexure H)	-	400	10 % Discount for BIS
6.4.3(By inspection)	-	400	10 % Discount for BIS
H 17.1.4.2(as per cl H 17.1.4.2)	-	400	10 % Discount for BIS
H.17.14(as per cl H 17.4.16)	-	400	10 % Discount for BIS
J 17.18.5(as per cl J 17.8.5)	-	400	10 % Discount for BIS
J 17.18.5(as per cl J 17.8.6)	-	400	10 % Discount for BIS
J 17.17.2(as per table 13.1)	-	400	10 % Discount for BIS
J 17.17(As per table 13.2)	-	400	10 % Discount for BIS
J. 17. 18.2(as per cl J. 17. 18.2)	-	400	10 % Discount for BIS
J. 17. 18.3(as per cl J. 17. 18.3)	-	400	10 % Discount for BIS
J. 17. 18.4(as per cl J. 17. 18.4)	-	400	10 % Discount for BIS
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	400	-
9(By inspection)	-	400	-
9.1.1(By inspection)	-	400	-
9.1.2(By inspection)	-	400	-
9.1.3(By inspection)	-	400	-
9.2(By inspection)	-	400	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	400	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.4(by inspection and by plating)	-	400	-
9.4.1(by inspection)	-	400	-
9.4.2(by inspection)	-	400	-
9.5.1(by inspection)	-	400	-
9.5.2(by inspection)	-	400	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.2(By inspection )	-	400	-
10.1.3(By inspection )	-	400	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	400	-
10.1.5(By measurement)	-	400	-
10.1.5.1(by inspection, by measurement, by torque test)	-	400	-
10.1.6(by inspection after cl 10.1.5)	-	400	-
10.1.7(by inspection)	-	400	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	400	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	400	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	400	-
10.1.11(By inspection)	-	400	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	400	-
10.1.13(By inspection and after the test of cl 17)	-	400	-
10.1.14(By inspection)	-	400	-
10.1.15(Figure 11 or 12)	-	400	-
10.2(By inspection)	-	400	-
10.2.1(Table 10.2.1)	-	400	-
10.2.2(By inspection)	-	400	-
10.2.3(By inspection)	-	400	-
10.2.4.1(Figure 14 or 15)	-	400	-
10.2.4.2(During the test of cl 14)	-	400	-
10.2.4.3(As per table 10.2.4.3)	-	400	-
10.2.4.4(As per Figure 16)	-	400	-
11.1(By inspection)	-	400	-
11.1.1(By inspection)	-	400	-
11.1.2(by inspection and by analysis of the material)	-	400	-
11.1.3(by inspection)	-	400	-
11.2(by inspection and by test)	-	400	-
11.2.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	400	-
11.2.5(As per annexure H, cl 11.2.5)	-	400	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	400	-
11.3.2(by inspection and by the tests of clauses 13)	-	400	-
11.3.3(by inspection)	-	400	-
11.3.4(by inspection)	-	400	-
11.3.5(by inspection)	-	400	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	400	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	400	-
11.3.8(by inspection)	-	400	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	400	-
11.4.1 (by inspection)	-	400	-
11.4.2(by inspection)	-	400	-
11.4.3(by the tests of clauses 15 to 17)	-	400	-
11.4.4 to 11.4.16(As per relevent type)	-	400	-
11.5(by inspection)	-	400	-
11.6.1(by inspection and by manual test)	-	400	-
11.6.2(by inspection and by manual test)	-	400	-
11.6.3.1(By inspection)	-	400	-
11.6.3.2(By inspection)	-	400	-
11.6.3.3(By inspection)	-	400	-
11.6.3.4(By inspection)	-	400	-
11.6.3.5(By inspection)	-	400	-
11.6.3.6(By inspection)	-	400	-
11.6.3.7(By inspection)	-	400	-
11.7.1(By Flexing test as per fig 9)	-	400	-
11.7.1.2.2(By Flexing test as per fig 9)	-	400	-
11.7.1.2.3(By Flexing test as per fig 9)	-	400	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	400	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	400	-
11.8(By inspection)	-	400	-
11.8.1(By inspection)	-	400	-
11.8.2(By inspection and as per table 11.8.2)	-	400	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	400	-
11.9.1(By inspection)	-	400	-
11.9.1.1(by inspection and manual test)	-	400	-
11.9.1.2(by inspection and manual test)	-	400	-
11.9.1.3(by inspection and manual test)	-	400	-
11.9.1.4(by inspection and manual test)	-	400	-
11.10.1(by inspection)	-	400	-
11.10.2(by inspection)	-	400	-
11.10.3(by inspection and by test of socket-outlet system)	-	400	-
11.11(Requirements during mounting, maintenance and servicing)	-	400	-
11.11.1(By inspection)	-	400	-
11.11.1.1(By inspection)	-	400	-
11.11.1.2(By inspection)	-	400	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	400	-
11.11.1.5.4(By inspection)	-	400	-
11.11.1.5.6(by pull test)	-	400	-
11.11.2(By inspection)	-	400	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.4(By inspection)	-	400	-
11.11.5(By inspection and by manual test)	-	400	-
11.11.6(By inspection)	-	400	-
11.11.7(By inspection)	-	400	-
11.12(As per H, cl 11.12)	-	400	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	400	-
11.1.102(As per IEC 60216-1:2001)	-	400	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	400	-
11.4.101(as per cl 11.4.101)	-	400	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	400	-
11.4.107(As per annexure DD)	-	400	-
11.6.3.101(As per table 7, item 117)	-	400	-
11.101(As per annexure BB)	-	400	-
12.1(As per IEC 60529)	-	400	-
12.1.6.2(Torque test)	-	400	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	400	-
12.3(as per cl 12.3.1 to 12.3.7)	-	400	-
12.101(None)	-	400	-
12.101.2(15 K+Tmax for 16 hr)	-	400	-
12.101.5(as per 12.103 to 12.105)	-	400	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	400	-
13.1(as per table 13.1)	-	400	-
13.2(As per table 13.2)	-	400	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	400	-
14.1(As per table 14.1)	-	400	-
14.3(As per table 14.1)	-	400	-
14.101.1( as per cl 14.102 and 14.102.1)	-	400	-
15(as per cl 15.1 to 15.4)	-	400	-
15.5(as per cl 15.5 to 15.6)	-	400	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	400	-
15.7(as per annexure J, cl 15.7)	-	400	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	400	-
15.5.3.109( voltage specified in Table 13.2)	-	400	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	400	-
16.2.4(test of cl 15 repeated )	-	400	-
16.2.4(42 of table 7.2)	-	400	-
18.1.6(By inspection)	-	400	-
18.1.6.1(By inspection)	-	400	-
18.1.6.2(By inspection)	-	400	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	400	-
18.2(Impact tester)	-	400	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	400	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	400	-
18.7(Pull test as per table 18.7)	-	400	-
18.8(as per cl 18.8.2 and 18.8.3)	-	400	-
18.9(axial pull of 15N/30N)	-	400	-
18.101(as per cl 18.101.2 and 101.3)	-	400	-
18.102(Hydrualic test)	-	400	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.2.1(By inspection)	-	400	-
19.2.2(By inspection)	-	400	-
19.2.3(By inspection)	-	400	-
19.2.4(By inspection)	-	400	-
19.2.4.1(By inspection)	-	400	-
19.2.5(By inspection)	-	400	-
19.2.5.1(By inspection)	-	400	-
19.2.6(By inspection)	-	400	-
20.1(as per table 20.2)	-	400	-
20.2.1(as per table 20.3)	-	400	-
20.2.2(as per table 20.4)	-	400	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	400	-
21.2.7(As per cl G.4)	-	400	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	400	-
25(as per annexure H)	-	400	-
27.1(as per annexure H)	-	400	-
27.2(as per cl 27.2.1 and 27.2.2)	-	400	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	400	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	400	-
10.1.7.1(by inspection)	-	400	-
11.7.2.11 to 11.7.2.15(By measurement)	-	400	-
5(By inspection)	-	400	-
5.1(By inspection)	-	400	-
5.2(By inspection)	-	400	-
6.1(By inspection)	-	400	-
6.2(By inspection)	-	400	-
6.3(By inspection)	-	400	-
6.4(By inspection)	-	400	-
6.5(By inspection)	-	400	-
6.5.1(IEC 60529 and by inspection)	-	400	-
6.5.2(IEC 60529 and by inspection)	-	400	-
6.5.3(Annexure N and by inspection)	-	400	-
6.6(By inspection)	-	400	-
6.7.1(By inspection)	-	400	-
6.7.2(By inspection)	-	400	-
6.8(By inspection)	-	400	-
6.8.2(By inspection)	-	400	-
6.9(Annexure H and by inspection)	-	400	-
6.1(By inspection)	-	400	-
6.11(By inspection)	-	400	-
6.12(By inspection)	-	400	-
6.13(By inspection)	-	400	-
6.14(By inspection)	-	400	-
6.15(Annexure J and by inspection)	-	400	-
6.16(By inspection)	-	400	-
6.18(Annexure H)	-	400	-
6.17(Annexure H)	-	400	-
6.4.3(By inspection)	-	400	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	400	-
H.17.14(as per cl H 17.4.16)	-	400	-
J 17.18.5(as per cl J 17.8.5)	-	400	-
J 17.18.5(as per cl J 17.8.6)	-	400	-
J 17.17.2(as per table 13.1)	-	400	-
J 17.17(As per table 13.2)	-	400	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	400	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	400	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	400	-
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	400	-
9(By inspection)	-	400	-
9.1.1(By inspection)	-	400	-
9.1.2(By inspection)	-	400	-
9.1.3(By inspection)	-	400	-
9.2(By inspection)	-	400	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	400	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.4(by inspection and by plating)	-	400	-
9.4.1(by inspection)	-	400	-
9.4.2(by inspection)	-	400	-
9.5.1(by inspection)	-	400	-
9.5.2(by inspection)	-	400	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.2(By inspection )	-	400	-
10.1.3(By inspection )	-	400	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	400	-
10.1.5(By measurement)	-	400	-
10.1.5.1(by inspection, by measurement, by torque test)	-	400	-
10.1.6(by inspection after cl 10.1.5)	-	400	-
10.1.7(by inspection)	-	400	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	400	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	400	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	400	-
10.1.11(By inspection)	-	400	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	400	-
10.1.13(By inspection and after the test of cl 17)	-	400	-
10.1.14(By inspection)	-	400	-
10.1.15(Figure 11 or 12)	-	400	-
10.2(By inspection)	-	400	-
10.2.1(Table 10.2.1)	-	400	-
10.2.2(By inspection)	-	400	-
10.2.3(By inspection)	-	400	-
10.2.4.1(Figure 14 or 15)	-	400	-
10.2.4.2(During the test of cl 14)	-	400	-
10.2.4.3(As per table 10.2.4.3)	-	400	-
10.2.4.4(As per Figure 16)	-	400	-
11.1(By inspection)	-	400	-
11.1.1(By inspection)	-	400	-
11.1.2(by inspection and by analysis of the material)	-	400	-
11.1.3(by inspection)	-	400	-
11.2(by inspection and by test)	-	400	-
11.2.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	400	-
11.2.5(As per annexure H, cl 11.2.5)	-	400	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	400	-
11.3.2(by inspection and by the tests of clauses 13)	-	400	-
11.3.3(by inspection)	-	400	-
11.3.4(by inspection)	-	400	-
11.3.5(by inspection)	-	400	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	400	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	400	-
11.3.8(by inspection)	-	400	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	400	-
11.4.1 (by inspection)	-	400	-
11.4.2(by inspection)	-	400	-
11.4.3(by the tests of clauses 15 to 17)	-	400	-
11.4.4 to 11.4.16(As per relevent type)	-	400	-
11.5(by inspection)	-	400	-
11.6.1(by inspection and by manual test)	-	400	-
11.6.2(by inspection and by manual test)	-	400	-
11.6.3.1(By inspection)	-	400	-
11.6.3.2(By inspection)	-	400	-
11.6.3.3(By inspection)	-	400	-
11.6.3.4(By inspection)	-	400	-
11.6.3.5(By inspection)	-	400	-
11.6.3.6(By inspection)	-	400	-
11.6.3.7(By inspection)	-	400	-
11.7.1(By Flexing test as per fig 9)	-	400	-
11.7.1.2.2(By Flexing test as per fig 9)	-	400	-
11.7.1.2.3(By Flexing test as per fig 9)	-	400	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	400	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	400	-
11.8(By inspection)	-	400	-
11.8.1(By inspection)	-	400	-
11.8.2(By inspection and as per table 11.8.2)	-	400	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	400	-
11.9.1(By inspection)	-	400	-
11.9.1.1(by inspection and manual test)	-	400	-
11.9.1.2(by inspection and manual test)	-	400	-
11.9.1.3(by inspection and manual test)	-	400	-
11.9.1.4(by inspection and manual test)	-	400	-
11.10.1(by inspection)	-	400	-
11.10.2(by inspection)	-	400	-
11.10.3(by inspection and by test of socket-outlet system)	-	400	-
11.11(Requirements during mounting, maintenance and servicing)	-	400	-
11.11.1(By inspection)	-	400	-
11.11.1.1(By inspection)	-	400	-
11.11.1.2(By inspection)	-	400	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	400	-
11.11.1.5.4(By inspection)	-	400	-
11.11.1.5.6(by pull test)	-	400	-
11.11.2(By inspection)	-	400	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.4(By inspection)	-	400	-
11.11.5(By inspection and by manual test)	-	400	-
11.11.6(By inspection)	-	400	-
11.11.7(By inspection)	-	400	-
11.12(As per H, cl 11.12)	-	400	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	400	-
11.1.102(As per IEC 60216-1:2001)	-	400	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	0	-
11.4.101(as per cl 11.4.101)	-	400	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	400	-
11.4.107(As per annexure DD)	-	400	-
11.6.3.101(As per table 7, item 117)	-	400	-
11.101(As per annexure BB)	-	400	-
12.1(As per IEC 60529)	-	400	-
12.1.6.2(Torque test)	-	400	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	400	-
12.3(as per cl 12.3.1 to 12.3.7)	-	400	-
12.101(None)	-	400	-
12.101.2(15 K+Tmax for 16 hr)	-	400	-
12.101.5(as per 12.103 to 12.105)	-	400	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	400	-
13.1(as per table 13.1)	-	400	-
13.2(As per table 13.2)	-	400	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	400	-
14.1(As per table 14.1)	-	400	-
14.3(As per table 14.1)	-	400	-
14.101.1( as per cl 14.102 and 14.102.1)	-	400	-
15(as per cl 15.1 to 15.4)	-	400	-
15.5(as per cl 15.5 to 15.6)	-	400	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	400	-
15.7(as per annexure J, cl 15.7)	-	400	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	400	-
15.5.3.109( voltage specified in Table 13.2)	-	400	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	400	-
16.2.4(test of cl 15 repeated )	-	400	-
16.2.4(42 of table 7.2)	-	400	-
18.1.6(By inspection)	-	400	-
18.1.6.1(By inspection)	-	400	-
18.1.6.2(By inspection)	-	400	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	400	-
18.2(Impact tester)	-	400	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	400	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	400	-
18.7(Pull test as per table 18.7)	-	400	-
18.8(as per cl 18.8.2 and 18.8.3)	-	400	-
18.9(axial pull of 15N/30N)	-	400	-
18.101(as per cl 18.101.2 and 101.3)	-	400	-
18.102(Hydrualic test)	-	400	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.2.1(By inspection)	-	400	-
19.2.2(By inspection)	-	400	-
19.2.3(By inspection)	-	400	-
19.2.4(By inspection)	-	400	-
19.2.4.1(By inspection)	-	400	-
19.2.5(By inspection)	-	400	-
19.2.5.1(By inspection)	-	400	-
19.2.6(By inspection)	-	400	-
20.1(as per table 20.2)	-	400	-
20.2.1(as per table 20.3)	-	400	-
20.2.2(as per table 20.4)	-	400	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	400	-
21.2.7(As per cl G.4)	-	400	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	400	-
25(as per annexure H)	-	400	-
27.1(as per annexure H)	-	400	-
27.2(as per cl 27.2.1 and 27.2.2)	-	400	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	400	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	400	-
10.1.7.1(by inspection)	-	400	-
11.7.2.11 to 11.7.2.15(By measurement)	-	400	-
5(By inspection)	-	400	-
5.1(By inspection)	-	400	-
5.2(By inspection)	-	400	-
6.1(By inspection)	-	400	-
6.2(By inspection)	-	400	-
6.3(By inspection)	-	400	-
6.4(By inspection)	-	400	-
6.5(By inspection)	-	400	-
6.5.1(IEC 60529 and by inspection)	-	400	-
6.5.2(IEC 60529 and by inspection)	-	400	-
6.5.3(Annexure N and by inspection)	-	400	-
6.6(By inspection)	-	400	-
6.7.1(By inspection)	-	400	-
6.7.2(By inspection)	-	400	-
6.8(By inspection)	-	400	-
6.8.2(By inspection)	-	400	-
6.9(Annexure H and by inspection)	-	400	-
6.1(By inspection)	-	400	-
6.11(By inspection)	-	400	-
6.12(By inspection)	-	400	-
6.13(By inspection)	-	400	-
6.14(By inspection)	-	400	-
6.15(Annexure J and by inspection)	-	400	-
6.16(By inspection)	-	400	-
6.18(Annexure H)	-	400	-
6.17(Annexure H)	-	400	-
6.4.3(By inspection)	-	400	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	400	-
H.17.14(as per cl H 17.4.16)	-	400	-
J 17.18.5(as per cl J 17.8.5)	-	400	-
J 17.18.5(as per cl J 17.8.6)	-	400	-
J 17.17.2(as per table 13.1)	-	400	-
J 17.17(As per table 13.2)	-	400	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	400	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	400	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	400	-
21.2.2 to 21.2.6(as per annexure G)	-	400	-
9(By inspection)	-	400	-
9.1.1(By inspection)	-	400	-
9.1.2(By inspection)	-	400	-
9.1.3(By inspection)	-	400	-
9.2(By inspection)	-	400	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	400	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.4(by inspection and by plating)	-	400	-
9.4.1(by inspection)	-	400	-
9.4.2(by inspection)	-	400	-
9.5.1(by inspection)	-	400	-
9.5.2(by inspection)	-	400	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.2(By inspection )	-	400	-
10.1.3(By inspection )	-	400	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	400	-
10.1.5(By measurement)	-	400	-
10.1.5.1(by inspection, by measurement, by torque test)	-	400	-
10.1.6(by inspection after cl 10.1.5)	-	400	-
10.1.7(by inspection)	-	400	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	400	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	400	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	400	-
10.1.11(By inspection)	-	400	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	400	-
10.1.13(By inspection and after the test of cl 17)	-	400	-
10.1.14(By inspection)	-	400	-
10.1.15(Figure 11 or 12)	-	400	-
10.2(By inspection)	-	400	-
10.2.1(Table 10.2.1)	-	400	-
10.2.2(By inspection)	-	400	-
10.2.3(By inspection)	-	400	-
10.2.4.1(Figure 14 or 15)	-	400	-
10.2.4.2(During the test of cl 14)	-	400	-
10.2.4.3(As per table 10.2.4.3)	-	400	-
10.2.4.4(As per Figure 16)	-	400	-
11.1(By inspection)	-	400	-
11.1.1(By inspection)	-	400	-
11.1.2(by inspection and by analysis of the material)	-	400	-
11.1.3(by inspection)	-	400	-
11.2(by inspection and by test)	-	400	-
11.2.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	400	-
11.2.5(As per annexure H, cl 11.2.5)	-	400	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	400	-
11.3.2(by inspection and by the tests of clauses 13)	-	400	-
11.3.3(by inspection)	-	400	-
11.3.4(by inspection)	-	400	-
11.3.5(by inspection)	-	400	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	400	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	400	-
11.3.8(by inspection)	-	400	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	400	-
11.4.1 (by inspection)	-	400	-
11.4.2(by inspection)	-	400	-
11.4.3(by the tests of clauses 15 to 17)	-	400	-
11.4.4 to 11.4.16(As per relevent type)	-	400	-
11.5(by inspection)	-	400	-
11.6.1(by inspection and by manual test)	-	400	-
11.6.2(by inspection and by manual test)	-	400	-
11.6.3.1(By inspection)	-	400	-
11.6.3.2(By inspection)	-	400	-
11.6.3.3(By inspection)	-	400	-
11.6.3.4(By inspection)	-	400	-
11.6.3.5(By inspection)	-	400	-
11.6.3.6(By inspection)	-	400	-
11.6.3.7(By inspection)	-	400	-
11.7.1(By Flexing test as per fig 9)	-	400	-
11.7.1.2.2(By Flexing test as per fig 9)	-	400	-
11.7.1.2.3(By Flexing test as per fig 9)	-	400	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	400	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	400	-
11.8(By inspection)	-	400	-
11.8.1(By inspection)	-	400	-
11.8.2(By inspection and as per table 11.8.2)	-	400	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	400	-
11.9.1(By inspection)	-	400	-
11.9.1.1(by inspection and manual test)	-	400	-
11.9.1.2(by inspection and manual test)	-	400	-
11.9.1.3(by inspection and manual test)	-	400	-
11.9.1.4(by inspection and manual test)	-	400	-
11.10.1(by inspection)	-	400	-
11.10.2(by inspection)	-	400	-
11.10.3(by inspection and by test of socket-outlet system)	-	400	-
11.11(Requirements during mounting, maintenance and servicing)	-	400	-
11.11.1(By inspection)	-	400	-
11.11.1.1(By inspection)	-	400	-
11.11.1.2(By inspection)	-	400	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	400	-
11.11.1.5.4(By inspection)	-	400	-
11.11.1.5.6(by pull test)	-	400	-
11.11.2(By inspection)	-	400	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.4(By inspection)	-	400	-
11.11.5(By inspection and by manual test)	-	400	-
11.11.6(By inspection)	-	400	-
11.11.7(By inspection)	-	400	-
11.12(As per H, cl 11.12)	-	400	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	400	-
11.1.102(As per IEC 60216-1:2001)	-	400	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	400	-
11.4.101(as per cl 11.4.101)	-	400	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	400	-
11.4.107(As per annexure DD)	-	400	-
11.6.3.101(As per table 7, item 117)	-	400	-
11.101(As per annexure BB)	-	400	-
12.1(As per IEC 60529)	-	400	-
12.1.6.2(Torque test)	-	400	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	400	-
12.3(as per cl 12.3.1 to 12.3.7)	-	400	-
12.101(None)	-	400	-
12.101.2(15 K+Tmax for 16 hr)	-	400	-
12.101.5(as per 12.103 to 12.105)	-	400	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	400	-
13.1(as per table 13.1)	-	400	-
13.2(As per table 13.2)	-	400	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	400	-
14.1(As per table 14.1)	-	400	-
14.3(As per table 14.1)	-	400	-
14.101.1( as per cl 14.102 and 14.102.1)	-	400	-
15(as per cl 15.1 to 15.4)	-	400	-
15.5(as per cl 15.5 to 15.6)	-	400	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	400	-
15.7(as per annexure J, cl 15.7)	-	400	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	400	-
15.5.3.109( voltage specified in Table 13.2)	-	400	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	400	-
16.2.4(test of cl 15 repeated )	-	400	-
16.2.4(42 of table 7.2)	-	400	-
18.1.6(By inspection)	-	400	-
18.1.6.1(By inspection)	-	400	-
18.1.6.2(By inspection)	-	400	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	400	-
18.2(Impact tester)	-	400	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	400	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	400	-
18.7(Pull test as per table 18.7)	-	400	-
18.8(as per cl 18.8.2 and 18.8.3)	-	400	-
18.9(axial pull of 15N/30N)	-	400	-
18.101(as per cl 18.101.2 and 101.3)	-	400	-
18.102(Hydrualic test)	-	400	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.2.1(By inspection)	-	400	-
19.2.2(By inspection)	-	400	-
19.2.3(By inspection)	-	400	-
19.2.4(By inspection)	-	400	-
19.2.4.1(By inspection)	-	400	-
19.2.5(By inspection)	-	400	-
19.2.5.1(By inspection)	-	400	-
19.2.6(By inspection)	-	400	-
20.1(as per table 20.2)	-	400	-
20.2.1(as per table 20.3)	-	400	-
20.2.2(as per table 20.4)	-	400	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	400	-
21.2.7(As per cl G.4)	-	400	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	400	-
25(as per annexure H)	-	400	-
27.1(as per annexure H)	-	400	-
27.2(as per cl 27.2.1 and 27.2.2)	-	400	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	400	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	400	-
10.1.7.1(by inspection)	-	400	-
11.7.2.11 to 11.7.2.15(By measurement)	-	400	-
5(By inspection)	-	400	-
5.1(By inspection)	-	400	-
5.2(By inspection)	-	400	-
6.1(By inspection)	-	400	-
6.2(By inspection)	-	400	-
6.3(By inspection)	-	400	-
6.4(By inspection)	-	400	-
6.5(By inspection)	-	400	-
6.5.1(IEC 60529 and by inspection)	-	400	-
6.5.2(IEC 60529 and by inspection)	-	400	-
6.5.3(Annexure N and by inspection)	-	400	-
6.6(By inspection)	-	400	-
6.7.1(By inspection)	-	400	-
6.7.2(By inspection)	-	400	-
6.8(By inspection)	-	400	-
6.8.2(By inspection)	-	400	-
6.9(Annexure H and by inspection)	-	400	-
6.1(By inspection)	-	400	-
6.11(By inspection)	-	400	-
6.12(By inspection)	-	400	-
6.13(By inspection)	-	400	-
6.14(By inspection)	-	400	-
6.15(Annexure J and by inspection)	-	400	-
6.16(By inspection)	-	400	-
6.18(Annexure H)	-	400	-
6.17(Annexure H)	-	400	-
6.4.3(By inspection)	-	400	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	400	-
H.17.14(as per cl H 17.4.16)	-	400	-
J 17.18.5(as per cl J 17.8.5)	-	400	-
J 17.18.5(as per cl J 17.8.6)	-	400	-
J 17.17.2(as per table 13.1)	-	400	-
J 17.17(As per table 13.2)	-	400	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	400	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	400	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	400	-
21.2.2 to 21.2.6(as per annexure G)	-	400	-
9(By inspection)	-	400	-
9.1.1(By inspection)	-	400	-
9.1.2(By inspection)	-	400	-
9.1.3(By inspection)	-	400	-
9.2(By inspection)	-	400	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	400	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	400	-
9.4(by inspection and by plating)	-	400	-
9.4.1(by inspection)	-	400	-
9.4.2(by inspection)	-	400	-
9.5.1(by inspection)	-	400	-
9.5.2(by inspection)	-	400	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	400	-
10.1.2(By inspection )	-	400	-
10.1.3(By inspection )	-	400	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	400	-
10.1.5(By measurement)	-	400	-
10.1.5.1(by inspection, by measurement, by torque test)	-	400	-
10.1.6(by inspection after cl 10.1.5)	-	400	-
10.1.7(by inspection)	-	400	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	400	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	400	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	400	-
10.1.11(By inspection)	-	400	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	400	-
10.1.13(By inspection and after the test of cl 17)	-	400	-
10.1.14(By inspection)	-	400	-
10.1.15(Figure 11 or 12)	-	400	-
10.2(By inspection)	-	400	-
10.2.1(Table 10.2.1)	-	400	-
10.2.2(By inspection)	-	400	-
10.2.3(By inspection)	-	400	-
10.2.4.1(Figure 14 or 15)	-	400	-
10.2.4.2(During the test of cl 14)	-	400	-
10.2.4.3(As per table 10.2.4.3)	-	400	-
10.2.4.4(As per Figure 16)	-	400	-
11.1(By inspection)	-	400	-
11.1.1(By inspection)	-	400	-
11.1.2(by inspection and by analysis of the material)	-	400	-
11.1.3(by inspection)	-	400	-
11.2(by inspection and by test)	-	400	-
11.2.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3(by inspection, by measurement and/or by manual test)	-	400	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	400	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	400	-
11.2.5(As per annexure H, cl 11.2.5)	-	400	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	400	-
11.3.2(by inspection and by the tests of clauses 13)	-	400	-
11.3.3(by inspection)	-	400	-
11.3.4(by inspection)	-	400	-
11.3.5(by inspection)	-	400	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	400	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	400	-
11.3.8(by inspection)	-	400	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	400	-
11.4.1 (by inspection)	-	400	-
11.4.2(by inspection)	-	400	-
11.4.3(by the tests of clauses 15 to 17)	-	400	-
11.4.4 to 11.4.16(As per relevent type)	-	400	-
11.5(by inspection)	-	400	-
11.6.1(by inspection and by manual test)	-	400	-
11.6.2(by inspection and by manual test)	-	400	-
11.6.3.1(By inspection)	-	400	-
11.6.3.2(By inspection)	-	400	-
11.6.3.3(By inspection)	-	400	-
11.6.3.4(By inspection)	-	400	-
11.6.3.5(By inspection)	-	400	-
11.6.3.6(By inspection)	-	400	-
11.6.3.7(By inspection)	-	400	-
11.7.1(By Flexing test as per fig 9)	-	400	-
11.7.1.2.2(By Flexing test as per fig 9)	-	400	-
11.7.1.2.3(By Flexing test as per fig 9)	-	400	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	400	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	400	-
11.8(By inspection)	-	400	-
11.8.1(By inspection)	-	400	-
11.8.2(By inspection and as per table 11.8.2)	-	400	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	400	-
11.9.1(By inspection)	-	400	-
11.9.1.1(by inspection and manual test)	-	400	-
11.9.1.2(by inspection and manual test)	-	400	-
11.9.1.3(by inspection and manual test)	-	400	-
11.9.1.4(by inspection and manual test)	-	400	-
11.10.1(by inspection)	-	400	-
11.10.2(by inspection)	-	400	-
11.10.3(by inspection and by test of socket-outlet system)	-	400	-
11.11(Requirements during mounting, maintenance and servicing)	-	400	-
11.11.1(By inspection)	-	400	-
11.11.1.1(By inspection)	-	400	-
11.11.1.2(By inspection)	-	400	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	400	-
11.11.1.5.4(By inspection)	-	400	-
11.11.1.5.6(by pull test)	-	400	-
11.11.2(By inspection)	-	400	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	400	-
11.11.4(By inspection)	-	400	-
11.11.5(By inspection and by manual test)	-	400	-
11.11.6(By inspection)	-	400	-
11.11.7(By inspection)	-	400	-
11.12(As per H, cl 11.12)	-	400	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	400	-
11.1.102(As per IEC 60216-1:2001)	-	400	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	400	-
11.4.101(as per cl 11.4.101)	-	400	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	400	-
11.4.107(As per annexure DD)	-	400	-
11.6.3.101(As per table 7, item 117)	-	400	-
11.101(As per annexure BB)	-	400	-
12.1(As per IEC 60529)	-	400	-
12.1.6.2(Torque test)	-	400	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	400	-
12.3(as per cl 12.3.1 to 12.3.7)	-	400	-
12.101(None)	-	400	-
12.101.2(15 K+Tmax for 16 hr)	-	400	-
12.101.5(as per 12.103 to 12.105)	-	400	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	400	-
13.1(as per table 13.1)	-	400	-
13.2(As per table 13.2)	-	400	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	400	-
14.1(As per table 14.1)	-	400	-
14.3(As per table 14.1)	-	400	-
14.101.1( as per cl 14.102 and 14.102.1)	-	400	-
15(as per cl 15.1 to 15.4)	-	400	-
15.5(as per cl 15.5 to 15.6)	-	400	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	400	-
15.7(as per annexure J, cl 15.7)	-	400	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	400	-
15.5.3.109( voltage specified in Table 13.2)	-	400	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	400	-
16.2.4(test of cl 15 repeated )	-	400	-
16.2.4(42 of table 7.2)	-	400	-
18.1.6(By inspection)	-	400	-
18.1.6.1(By inspection)	-	400	-
18.1.6.2(By inspection)	-	400	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	400	-
18.2(Impact tester)	-	400	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	400	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	400	-
18.7(Pull test as per table 18.7)	-	400	-
18.8(as per cl 18.8.2 and 18.8.3)	-	400	-
18.9(axial pull of 15N/30N)	-	400	-
18.101(as per cl 18.101.2 and 101.3)	-	400	-
18.102(Hydrualic test)	-	400	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	400	-
19.2.1(By inspection)	-	400	-
19.2.2(By inspection)	-	400	-
19.2.3(By inspection)	-	400	-
19.2.4(By inspection)	-	400	-
19.2.4.1(By inspection)	-	400	-
19.2.5(By inspection)	-	400	-
19.2.5.1(By inspection)	-	400	-
19.2.6(By inspection)	-	400	-
20.1(as per table 20.2)	-	400	-
20.2.1(as per table 20.3)	-	400	-
20.2.2(as per table 20.4)	-	400	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	400	-
21.2.7(As per cl G.4)	-	400	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	400	-
25(as per annexure H)	-	400	-
27.1(as per annexure H)	-	400	-
27.2(as per cl 27.2.1 and 27.2.2)	-	400	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	400	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	400	-
10.1.7.1(by inspection)	-	400	-
11.7.2.11 to 11.7.2.15(By measurement)	-	400	-
5(By inspection)	-	400	-
5.1(By inspection)	-	400	-
5.2(By inspection)	-	400	-
6.1(By inspection)	-	400	-
6.2(By inspection)	-	400	-
6.3(By inspection)	-	400	-
6.4(By inspection)	-	400	-
6.5(By inspection)	-	400	-
6.5.1(IEC 60529 and by inspection)	-	400	-
6.5.2(IEC 60529 and by inspection)	-	400	-
6.5.3(Annexure N and by inspection)	-	400	-
6.6(By inspection)	-	400	-
6.7.1(By inspection)	-	400	-
6.7.2(By inspection)	-	400	-
6.8(By inspection)	-	400	-
6.8.2(By inspection)	-	400	-
6.9(Annexure H and by inspection)	-	400	-
6.1(By inspection)	-	400	-
6.11(By inspection)	-	400	-
6.12(By inspection)	-	400	-
6.13(By inspection)	-	400	-
6.14(By inspection)	-	400	-
6.15(Annexure J and by inspection)	-	400	-
6.16(By inspection)	-	400	-
6.18(Annexure H)	-	400	-
6.17(Annexure H)	-	400	-
6.4.3(By inspection)	-	400	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	400	-
H.17.14(as per cl H 17.4.16)	-	400	-
J 17.18.5(as per cl J 17.8.5)	-	400	-
J 17.18.5(as per cl J 17.8.6)	-	400	-
J 17.17.2(as per table 13.1)	-	400	-
J 17.17(As per table 13.2)	-	400	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	400	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	400	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	400	-
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	400	-
17.1(by the tests of 17.1.3 as indicated in 17.16)	-	400	-
17.6(as per cl 17.6.1 and 17.6.2)	-	400	-
17.7(as per cl 17.7.1 to 17.7.7)	-	400	-
17.8(as per cl 17.8.1 to 17.8.4.1)	-	400	-
17.9(as per cl 17.9.1 to 17.9.4)	-	400	-
17.1(as per cl 17.10.1 to 17.10.4)	-	400	-
17.11(as per cl 17.11.1 to 17.11.4)	-	400	-
17.12(as per cl 17.12.1 to 17.12.5)	-	400	-
17.13(as per cl 17.13.1 to 17.13.4)	-	400	-
17.15.2(as per cl 17.15.2 and 17.15.2.3)	-	400	-
17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C)	-	400	-
17.16.107( 250 thermal cycles.)	-	400	-
17.16.108( 7 h at a temperature of –20 C (or lower, if declared))	-	400	-
17.101.1(as per cl 17.101.1 to 17.105)	-	400	-
21.2.2 to 21.2.6(as per annexure G)	-	-	-
9(By inspection)	-	-	-
9.1.1(By inspection)	-	-	-
9.1.2(By inspection)	-	-	-
9.1.3(By inspection)	-	-	-
9.2(By inspection)	-	-	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	-	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	-	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	-	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	-	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	-	-
9.4(by inspection and by plating)	-	-	-
9.4.1(by inspection)	-	-	-
9.4.2(by inspection)	-	-	-
9.5.1(by inspection)	-	-	-
9.5.2(by inspection)	-	-	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	-	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	-	-
10.1.2(By inspection )	-	-	-
10.1.3(By inspection )	-	-	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	-	-
10.1.5(By measurement)	-	-	-
10.1.5.1(by inspection, by measurement, by torque test)	-	-	-
10.1.6(by inspection after cl 10.1.5)	-	-	-
10.1.7(by inspection)	-	-	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	-	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	-	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	-	-
10.1.11(By inspection)	-	-	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	-	-
10.1.13(By inspection and after the test of cl 17)	-	-	-
10.1.14(By inspection)	-	-	-
10.1.15(Figure 11 or 12)	-	-	-
10.2(By inspection)	-	-	-
10.2.1(Table 10.2.1)	-	-	-
10.2.2(By inspection)	-	-	-
10.2.3(By inspection)	-	-	-
10.2.4.1(Figure 14 or 15)	-	-	-
10.2.4.2(During the test of cl 14)	-	-	-
10.2.4.3(As per table 10.2.4.3)	-	-	-
10.2.4.4(As per Figure 16)	-	-	-
11.1(By inspection)	-	-	-
11.1.1(By inspection)	-	-	-
11.1.2(by inspection and by analysis of the material)	-	-	-
11.1.3(by inspection)	-	-	-
11.2(by inspection and by test)	-	-	-
11.2.2(by inspection, by measurement and/or by manual test)	-	-	-
11.2.3(by inspection, by measurement and/or by manual test)	-	-	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	-	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	-	-
11.2.5(As per annexure H, cl 11.2.5)	-	-	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	-	-
11.3.2(by inspection and by the tests of clauses 13)	-	-	-
11.3.3(by inspection)	-	-	-
11.3.4(by inspection)	-	-	-
11.3.5(by inspection)	-	-	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	-	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	-	-
11.3.8(by inspection)	-	-	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	-	-
11.4.1 (by inspection)	-	-	-
11.4.2(by inspection)	-	-	-
11.4.3(by the tests of clauses 15 to 17)	-	-	-
11.4.4 to 11.4.16(As per relevent type)	-	-	-
11.5(by inspection)	-	-	-
11.6.1(by inspection and by manual test)	-	-	-
11.6.2(by inspection and by manual test)	-	-	-
11.6.3.1(By inspection)	-	-	-
11.6.3.2(By inspection)	-	-	-
11.6.3.3(By inspection)	-	-	-
11.6.3.4(By inspection)	-	-	-
11.6.3.5(By inspection)	-	-	-
11.6.3.6(By inspection)	-	-	-
11.6.3.7(By inspection)	-	-	-
11.7.1(By Flexing test as per fig 9)	-	-	-
11.7.1.2.2(By Flexing test as per fig 9)	-	-	-
11.7.1.2.3(By Flexing test as per fig 9)	-	-	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	-	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	-	-
11.8(By inspection)	-	-	-
11.8.1(By inspection)	-	-	-
11.8.2(By inspection and as per table 11.8.2)	-	-	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	-	-
11.9.1(By inspection)	-	-	-
11.9.1.1(by inspection and manual test)	-	-	-
11.9.1.2(by inspection and manual test)	-	-	-
11.9.1.3(by inspection and manual test)	-	-	-
11.9.1.4(by inspection and manual test)	-	-	-
11.10.1(by inspection)	-	-	-
11.10.2(by inspection)	-	-	-
11.10.3(by inspection and by test of socket-outlet system)	-	-	-
11.11(Requirements during mounting, maintenance and servicing)	-	-	-
11.11.1(By inspection)	-	-	-
11.11.1.1(By inspection)	-	-	-
11.11.1.2(By inspection)	-	-	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	-	-
11.11.1.5.4(By inspection)	-	-	-
11.11.1.5.6(by pull test)	-	-	-
11.11.2(By inspection)	-	-	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	-	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	-	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	-	-
11.11.4(By inspection)	-	-	-
11.11.5(By inspection and by manual test)	-	-	-
11.11.6(By inspection)	-	-	-
11.11.7(By inspection)	-	-	-
11.12(As per H, cl 11.12)	-	-	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	-	-
11.1.102(As per IEC 60216-1:2001)	-	-	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	-	-
11.4.101(as per cl 11.4.101)	-	-	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	-	-
11.4.107(As per annexure DD)	-	-	-
11.6.3.101(As per table 7, item 117)	-	-	-
11.101(As per annexure BB)	-	-	-
12.1(As per IEC 60529)	-	-	-
12.1.6.2(Torque test)	-	-	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	-	-
12.3(as per cl 12.3.1 to 12.3.7)	-	-	-
12.101(None)	-	-	-
12.101.2(15 K+Tmax for 16 hr)	-	-	-
12.101.5(as per 12.103 to 12.105)	-	-	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	-	-
13.1(as per table 13.1)	-	-	-
13.2(As per table 13.2)	-	-	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	-	-
14.1(As per table 14.1)	-	-	-
14.3(As per table 14.1)	-	-	-
14.101.1( as per cl 14.102 and 14.102.1)	-	-	-
15(as per cl 15.1 to 15.4)	-	-	-
15.5(as per cl 15.5 to 15.6)	-	-	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	-	-
15.7(as per annexure J, cl 15.7)	-	-	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	-	-
15.5.3.109( voltage specified in Table 13.2)	-	-	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	-	-
16.2.4(test of cl 15 repeated )	-	-	-
16.2.4(42 of table 7.2)	-	-	-
18.1.6(By inspection)	-	-	-
18.1.6.1(By inspection)	-	-	-
18.1.6.2(By inspection)	-	-	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	-	-
18.2(Impact tester)	-	-	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	-	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	-	-
18.7(Pull test as per table 18.7)	-	-	-
18.8(as per cl 18.8.2 and 18.8.3)	-	-	-
18.9(axial pull of 15N/30N)	-	-	-
18.101(as per cl 18.101.2 and 101.3)	-	-	-
18.102(Hydrualic test)	-	-	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.2.1(By inspection)	-	-	-
19.2.2(By inspection)	-	-	-
19.2.3(By inspection)	-	-	-
19.2.4(By inspection)	-	-	-
19.2.4.1(By inspection)	-	-	-
19.2.5(By inspection)	-	-	-
19.2.5.1(By inspection)	-	-	-
19.2.6(By inspection)	-	-	-
20.1(as per table 20.2)	-	-	-
20.2.1(as per table 20.3)	-	-	-
20.2.2(as per table 20.4)	-	-	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	-	-
21.2.7(As per cl G.4)	-	-	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	-	-
25(as per annexure H)	-	-	-
27.1(as per annexure H)	-	-	-
27.2(as per cl 27.2.1 and 27.2.2)	-	-	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	-	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	-	-
10.1.7.1(by inspection)	-	-	-
11.7.2.11 to 11.7.2.15(By measurement)	-	-	-
5(By inspection)	-	-	-
5.1(By inspection)	-	-	-
5.2(By inspection)	-	-	-
6.1(By inspection)	-	-	-
6.2(By inspection)	-	-	-
6.3(By inspection)	-	-	-
6.4(By inspection)	-	-	-
6.5(By inspection)	-	-	-
6.5.1(IEC 60529 and by inspection)	-	-	-
6.5.2(IEC 60529 and by inspection)	-	-	-
6.5.3(Annexure N and by inspection)	-	-	-
6.6(By inspection)	-	-	-
6.7.1(By inspection)	-	-	-
6.7.2(By inspection)	-	-	-
6.8(By inspection)	-	-	-
6.8.2(By inspection)	-	-	-
6.9(Annexure H and by inspection)	-	-	-
6.1(By inspection)	-	-	-
6.11(By inspection)	-	-	-
6.12(By inspection)	-	-	-
6.13(By inspection)	-	-	-
6.14(By inspection)	-	-	-
6.15(Annexure J and by inspection)	-	-	-
6.16(By inspection)	-	-	-
6.18(Annexure H)	-	-	-
6.17(Annexure H)	-	-	-
6.4.3(By inspection)	-	-	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	-	-
H.17.14(as per cl H 17.4.16)	-	-	-
J 17.18.5(as per cl J 17.8.5)	-	-	-
J 17.18.5(as per cl J 17.8.6)	-	-	-
J 17.17.2(as per table 13.1)	-	-	-
J 17.17(As per table 13.2)	-	-	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	-	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	-	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	-	-
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	-	-
17.1(by the tests of 17.1.3 as indicated in 17.16)	-	-	-
17.6(as per cl 17.6.1 and 17.6.2)	-	-	-
17.7(as per cl 17.7.1 to 17.7.7)	-	-	-
17.8(as per cl 17.8.1 to 17.8.4.1)	-	-	-
17.9(as per cl 17.9.1 to 17.9.4)	-	-	-
17.1(as per cl 17.10.1 to 17.10.4)	-	-	-
17.11(as per cl 17.11.1 to 17.11.4)	-	-	-
17.12(as per cl 17.12.1 to 17.12.5)	-	-	-
17.13(as per cl 17.13.1 to 17.13.4)	-	-	-
17.15.2(as per cl 17.15.2 and 17.15.2.3)	-	-	-
17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C)	-	-	-
17.16.107( 250 thermal cycles.)	-	-	-
17.16.108( 7 h at a temperature of –20 C (or lower, if declared))	-	-	-
17.101.1(as per cl 17.101.1 to 17.105)	-	-	-

14 Nov, 2027

-
-

13506

BIS, Central Laboratory (CL)

None

IS 1051 (1980)

Specification for pyrethrum extracts

Rs 5750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.2.2 (Colour and Odour)	-
Cl.2.3 (Flash point)	-
Cl.2.5 (Saponification value)	-
Cl.2.1.2 (Identity)	-
Cl.2.4 (Total Pyrethrin Content)	-
Cl.2.1.1 (Description)	-

-
-

13507

BIS, Southern Regional Laboratory (SRL)

None

IS 16232 (2014)

Iron fortified iodized salt (Double Fortified Salt) - Food grade - Specification

11800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description - Iron fortified iodized salt (Double fortified salt) shall be crushed crystalline solid; white or pale pink or light grey in colour, free from contamination with clay and other extraneous adulterants and impurities)	-
3.3 (material shall pass through 4.00 mm IS sieve)	-
3.4 - Table 1 - i (Moisture - Annex A of IS 7224)	-
3.4 - Table 1 - ii (Water insoluble matter, on dry basis - A-4 of IS 253 )	-
3.4 - Table 1 - iii (Chloride content (as NaCl), on dry basis - A-4 of IS 253)	-
3.4 - Table 1 - iv (Matter insoluble in dilute HCl, on dry basis - Annex G)	-
3.4 - Table 1 - v (Matter soluble in water other than sodium chloride, on dry basis - A-6 of IS 253)	-
3.4 - Table 1 - vi (Iron content (as Fe) - Annex A)	-
3.4 - Table 1 - vii- a (Iodine content, Manufacturer’s level - Annex B)	-
3.4 - Table 1 - vii- b (Iodine content, Distribution channel including retail level - Annex B)	-
3.4 - Table 1 - viii - b (pH of 5 percent aqueous solution : For other forms of iron fortification - Annex C)	-
3.4 - Table 1 - ix (Sulphate (as SO4) - A-8 of IS 253)	-
3.4 - Table 1 - x (Magnesium (as Mg), water soluble - A-7 of IS 253)	-
3.4 - Table 1 - xi - b (Phosphorous (as P2O5) - For other forms of iron fortification - Annex D)	-
3.4 - Table 1 - xii (Sodium hexa meta phosphate, on dry basis - Annex E)	-
3.4 - Table 1 - xi - a (Phosphorous (as P2O5) - For iron fortification through encapsulated ferrous fumarate - Annex D)	-

-
" 500 g " Excluding Except SHMP and Phosphorous Content Tets"

13508

Aforeserve Labs Private Limited, Gurugram

9140626

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

upto 5kVA

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6(Power interface)	-	1000	-
4.7(Marking & instructions)	-	500	-
5.1(Protection against shock and energy hazards)	-	500	-
5.2(Requirement of auxiliary circuits)	-	900	-
5.3(Protective earthing and bonding)	-	900	-
5.4(AC and DC power isolation)	-	900	-
5.5(Over current and earth fault condition)	-	900	-
5.6(Safety interlocks)	-	900	-
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	900	-
6.1(Wiring, connections and supply)	-	900	-
6.2(Connection to power)	-	900	-
6.3(Wiring terminals for external power conductors)	-	900	-
7.1(Enclosure)	-	900	-
7.2(STABILITY)	-	900	-
7.3(MECHANICAL STRENGTH)	-	900	-
7.4(Construction details)	-	900	-
7.5(Resistance to fire)	-	900	-
7.6(Battery location)	-	900	-
7.7(Temperature rise)	-	900	-
8.1(General procision for earth leakage)	-	900	-
8.2(Electric Strength)	-	900	-
8.3(Abnormal operating and fault conditions)	-	900	-
9.0(Connection to telecommunication networks)	-	900	-
4.5/RD 1.5(Components)	-	900	-
2.10.5.11(SMPS/Main transformer)	-	900	-
2.10.6(PCB Material)	-	900	-
3.2.5(Non-rewirable plug with PVC sheathed cable)	-	900	-
3.2.4(Appliances inlets/connectors)	-	900	-
2.10.5.4(Semiconductor devices)	-	900	-
2.10.5.13(Winding wires)	-	900	-
4.3.8(Batteries)	-	900	-
2.10.5.6(Thin sheet material)	-	900	-
5.6.1/ RD 2.8.7(Switches & Relays)	-	900	-
6.1.1/ RD 3.1.4(Insulating Conductors)	-	900	-

06 Jun, 2027

-
Switches & Relays (Cl.2.8.2,2.8.5,2.8.7), Winding wires (Cl.2.10.5.3), Semi-conductor Devices (Cl.2.10.5.4), SMPS/Mains transformer (Cl. 2.10.5.11), PCB material (Cl.2.10.6), Wire in wound component (Cl.2.10.5.12), Wire with solvent based enamel in wound component (Cl.2.10.5.13), Additional insulation in wound component (Cl.2.10.5.14), Test for pollution degree 1 environment and insulating compound (Cl.2.10.10), Test for semiconductor devices and for cemented joints (Cl.2.10.11), enclosed and sealed parts (Cl.2.10.12), Internal wire (Cl.3.1.4), Batteries (Cl.4.3.8), Protection of personnel safety interlock (Cl.5.6), Ac power cords (Cl.6.2.1/RD-cl.3.2.6.1), Non rewirable plug with PVC sheathed cable (Cl.3.2.5)

13509

Matrix Test Labs

8138626

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.6(Marking)	-	2000	10% discount to BIS
20.7(Construction)	-	5000	10% discount to BIS
20.8(Creepage Distance and Clearances)	-	5000	10% discount to BIS
20.9(Provision for earthing)	-	5000	10% discount to BIS
20.10(Terminals)	-	2000	10% discount to BIS
20.11(External & Internal Wiring)	-	5000	10% discount to BIS
20.12(Protection against electric shock)	-	5000	10% discount to BIS
20.13(Endurance Tests and Thermal Tests)	-	15000	10% discount to BIS
20.14(Resistance to Dust & Moisture)	-	10000	10% discount to BIS
20.15(Insulation Resistance and Electric Strength)	-	10000	10% discount to BIS
20.16(Resistance to Heat , fire and tracking)	-	5000	10% discount to BIS

31 Dec, 2029

-
Included w.e.f. 16.11.2022. Electromechanical Contact System (Cl.4.11.6), Photo Biological hazards (Cl.4.24), as per (RD) IS 10322(P1):2014

13510

Matrix Test Labs

8138626

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	2000	10% discount to BIS
8.0(Creepage Distance and Clearances)	-	5000	10% discount to BIS
9.0(Provision for earthing)	-	5000	10% discount to BIS
10.0(Terminals)	-	2000	10% discount to BIS
11.0(External & Internal Wiring)	-	5000	10% discount to BIS
12.0(Protection against electric shock)	-	5000	10% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	15000	10% discount to BIS
14.0(Resistance to Dust & Moisture)	-	10000	10% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	10000	10% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	5000	10% discount to BIS
7.0(Construction)	-	5000	10% discount to BIS

31 Dec, 2029

-
Included w.e.f. 16.11.2022. Electromechanical Contact System (Cl.4.11.6), UV Radiation (Cl. 4.24, Annex-P), as per (RD) IS 10322(P-1):2014

13511

Matrix Test Labs

8138626

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	5000	10% discount to BIS
8(Terminals)	-	5000	10% discount to BIS
9(PROVISION FOR EARTHING)	-	5000	10% discount to BIS
10(Protection against accidental contact with live parts)	-	5000	10% discount to BIS
11(Mositure Resistance and Insulation)	-	5000	10% discount to BIS
12(Electric Strength)	-	5000	10% discount to BIS
13(Fault conditions)	-	10000	10% discount to BIS
16(Creepage distance and clearances)	-	5000	10% discount to BIS
17(Screws, current carrying parts and connections)	-	5000	10% discount to BIS
18(Resistance to heat, fire and tracking)	-	2000	10% discount to BIS
19(Resistance to corrosion)	-	1000	10% discount to BIS

31 Dec, 2029

-
Included w.e.f. 16.11.2022

13512

Aforeserve Labs Private Limited, Gurugram

9140626

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	1000	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	1000	-
11.2(General)	-	1000	-
11.3(Heating)	-	1000	-
13.1(General)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
14(Transient Over Voltages)	-	1000	-
15.0(General)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.2(Spillage Test)	-	1000	-
15.3(Humidity Test)	-	1000	-
16.0(General)	-	1000	-
16.1(General)	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
18(Endurance Test requirements and tests)	-	1000	-
19(Abnormal Operation)	-	1000	-
20(Stability test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
22(Construction verification related test)	-	1000	-
23(General)	-	1000	-
25(Supply connection and external flexible cords)	-	900	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screw test and connections)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
31(Resistance to Rusting)	-	1000	-

06 Jun, 2027

-
Exclusions: EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), component (Cl.24), Cl.32-Radation toxicity and similar hazards. Included w.e.f. 23-02-2022. "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

13513

BIS, Western Regional Laboratory (WRL)

None

IS 14927 : Part 2 (2001)

Cable Trunking and Ducting Systems for Electrical Installations : Part 2 Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-
7.1 (Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-
7.1 (Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-
7.1 (Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-
7.1 (Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-
7.2 (Marking (as per Cl 7.2 of IS:14927(Pt-I ):2001))	-
8.1 ( Dimensions (As per cl.8.1 of IS 14927(Pt-1) : 2001))	-
8.2 (Dimensions (As per cl.8.2 of IS 14927(Pt-1) : 2001)	-
8.3, table 2 ( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-
8.3, table 2 ( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-
8.3, table 2 ( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-
9.1 (Construction ( As per Cl. 9.1 of IS 14927(Pt-1):2001))	-
9.1 (Construction)	-
9.2 (Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-
9.2 (Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-
9.2 (Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-
9.2 (Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-
9.3 (Construction ( As per Cl. 9.3 of IS 14927(Pt-1):2001))	-
9.3.1 (Construction ( As per Cl. 9.3.1 of IS 14927(Pt-1):2001))	-
9.3.2, table 3 (Construction ( As per Cl. 9.3.2, Table-3 of IS 14927(Pt-1):2001))	-
9.4.1 (Construction [Access to Live Parts (As per Cl. 9.4.1 of IS 14927(Pt-1):2001)])	-
9.5 (Construction (As per Cl. 9.5 of IS 14927(Pt-1):2001))	-
9.6.2 (Construction [Membranes (As per Cl.9.6.2 of IS: 14927 (Pt-1):2001)])	-
9.6.4 (Construction [Membranes (As per Cl.9.6.4 of IS: 14927 (Pt-1):2001)])	-
9.7.2, table 4 (Construction [Glands (As per Cl.9.7.2 and Table-4 of IS: 14927 (Pt-1):2001)] )	-
10 (Mechanical Properties )	-
10.2 (Cable supporting test for Surface mounting (As per Cl.10.2))	-
10.2.3 (Cable supporting test for Surface mounting (As per Cl.10.2.3))	-
10.3 (Impact Test [ Cl.10.3 ])	-
10.4 (Linear Deflection Test [ Cl.10.4 ])	-
10.5 (External load Test [ Cl.10.5 ])	-
11.1.1 (Resistance to flame propagation (As per Cl. 11.1.1))	-
12.2 (Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-
12.2 (Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-
12.3 (Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-

-
Test facility not available for the following: "12 pieces of 2m length "1. Cl. 12.2.1 Resistance of the Sample per Unit Length 2. Cl. 9.3.2 Torque Test , 3. Test facility for Membranes as per Cl. 9.6 and and Glands as per Cl. 9.7" "

13514

BIS, Western Regional Laboratory (WRL)

None

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

Rs.9800/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Classification- IS 302-1 )	-
6 (Classification- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.3 (Marking- IS 302-1)	-
7.4 (Marking- IS 302-1)	-
7.6 (Marking- IS 302-1)	-
7.7 (Marking- IS 302-1)	-
7.8 (Marking- IS 302-1)	-
7.11 (Marking- IS 302-1)	-
7.12 (Marking- IS 302-1)	-
7.13 (Marking- IS 302-1)	-
7.14 (Marking- IS 302-1)	-
7.15 (Marking- IS 302-1)	-
7.101 (Marking)	-
8 ( Protection Against Electric Shock, IS 302-1)	-
10 (Power Input and Current, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
15.1 (Moisture Resistance, IS 302-1)	-
15.2 (Moisture Resistance, IS 302-1)	-
15 (Moisture Resistance, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
17 (Overload protection of Transformers and Associated Circuits, IS 302-1)	-
17 (Overload protection of Transformers and Associated Circuits, IS 302-1)	-
19.7 (Abnormal Operation, IS 302-1)	-
19.8 (Abnormal Operation, IS 302-1)	-
19.9 (Abnormal Operation, IS 302-1)	-
19.1 (Abnormal Operation, IS 302-1)	-
19.101 (Abnormal Operation)	-
19.102 (Abnormal Operation)	-
20.1 (Stability & Mechanical Hazards, IS 302-1)	-
20.2 (Stability & Mechanical Hazards, IS 302-1)	-
20.101 (Stability & Mechanical Hazards)	-
20.102 (Stability & Mechanical Hazards)	-
20.103 (Stability & Mechanical Hazards)	-
20.104 (Stability & Mechanical Hazards)	-
20.105 (Stability & Mechanical Hazards)	-
20.106 (Stability & Mechanical Hazards)	-
20.107 (Stability & Mechanical Hazards)	-
20.108 (Stability & Mechanical Hazards)	-
20.109 (Stability & Mechanical Hazards)	-
20.110 (Stability & Mechanical Hazards)	-
20.111 (Stability & Mechanical Hazards)	-
20.112 (Stability & Mechanical Hazards)	-
20.113 (Stability & Mechanical Hazards)	-
20.114 (Stability & Mechanical Hazards)	-
20.115 (Stability & Mechanical Hazards)	-
20.116 (Stability & Mechanical Hazards)	-
21.1 (Mechanical Strength, IS 302-1)	-
21.2 (Mechanical Strength, IS 302-1)	-
22 (Construction, IS 302-1)	-
22.101 (Construction)	-
22.102 (Construction)	-
23.1 (Internal Wiring, IS 302-1)	-
23.2 (Internal Wiring, IS 302-1)	-
23.3 (Internal Wiring, IS 302-1)	-
23.4 (Internal Wiring, IS 302-1)	-
23.5 (Internal Wiring, IS 302-1)	-
23.6 (Internal Wiring, IS 302-1)	-
23.7 (Internal Wiring, IS 302-1)	-
23.8 (Internal Wiring, IS 302-1)	-
23.9 (Internal Wiring, IS 302-1)	-
23.10 (Internal Wiring, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.2 (Components, IS 302-1)	-
24.5 (Components, IS 302-1)	-
24.6 (Components, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.5 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.6 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.7 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.8 (Supply Connection and External Flexible Cords, IS 302-1)	-
26.9 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.11 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.12 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.13 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.15 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.16 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.17 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.18 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.19 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.2 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.21 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.22 (Supply Connection and External Flexible Cords, IS 302-1)	-
26 (Terminals for External Conductors, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
27.2 (Provision for Earthing, IS 302-1)	-
27.3 (Provision for Earthing, IS 302-1)	-
27.4 (Provision for Earthing, IS 302-1)	-
27.5 (Provision for Earthing, IS 302-1)	-
28 (Screws & Connections, IS 302-1)	-
29.1 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
29.2 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
30.1 (Resistance to Heat and Fire, IS 302-1)	-
30.2 (Resistance to Heat and Fire, IS 302-1)	-
31 (Resistance of Rusting, IS 302-1)	-

-
"Test facility available only for the following machines: Hand blender, centrifugal juicers, food mixers, citrus-fruit squeezers 1. 24.1.3 Endurance test for switches 2. 24 Components"

13515

BIS, Western Regional Laboratory (WRL)

None

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

Rs.12300/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.0 (Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-
7.0 (Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-
9.0 (Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-
9.0 (Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-
9.0 (Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-
9.0 (Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-
9.0 (Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-
9.0 (Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-
9.0 (Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-
9.0 (Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-
9.0 (Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-
9.0 (Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-
9.0 (Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-
9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-
9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-
9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-
9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-
9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-
9.0 (Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-
9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-
9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-
9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-
9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-
9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-
9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-
9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-
9.0 (Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-
9.0 (Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-
9.0 (Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-
9.0 (Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-
9.0 (Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-
9.0 (Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-
9.0 (Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-
9.0 (Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-
9.0 (Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-
9.0 (Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-
9.0 (Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-
9.0 (Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-
9.0 (Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-
9.0 (Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-
9.0 (Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-
9.0 (Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-
9.0 (Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-
9.0 (Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-
9.0 (Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-
9.0 (Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-
9.0 (Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-
10.0 (Measurement of Heating up time)	-
10.0 (Measurement of Heating up time)	-
11.0 (Measurement of sole plate temperature)	-
11.0 (Measurement of sole plate temperature)	-
11.0 (Measurement of sole plate temperature)	-
11.0 (Measurement of sole plate temperature)	-
12.0 (Measurement of Tempearture Distribution)	-
13.0 (Measurement of Initial overswing temperature and Heating up excess temperature)	-
13.0 (Measurement of Initial overswing temperature and Heating up excess temperature)	-
14.0 (Measurement of Cyclic fluctuation of temperature of hottest point )	-
16.0 (Measurement of Thermostatic staibility)	-
16.0 (Measurement of Thermostatic staibility)	-
16.0 (Measurement of Thermostatic staibility)	-
16.0 (Measurement of Thermostatic staibility)	-
16.0 (Measurement of Thermostatic staibility)	-
16.0 (Measurement of Thermostatic staibility)	-
7.0 (Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-
7.0 (Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-
6 (Measurement of Thermostatic staibility)	-
15 (MEASUREMENT OF TEMPERATURE DROP UNDER LOAD)	-
17 (Measurement of Thermostatic staibility)	-

-
The following test facilities for clauses are not available: 1. Cl 24.1.2 for switch endurance of steam iron 2. Cl 15 Measurement of Temperature and Average Input Power Under Load 3. Cl 17 Finish 4. Clause 24 Components as per IS 302 Part 2 Section 3

13516

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 273 (1990)

Picks and beaters - specification (Fourth Revision)

All Grade / Type / Size / Designation as per IS 273

3800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	1200	-
4(Material testing)	-	1100	-
7(Workmanship and finish)	-	500	-
9.1(Drop Test)	-	500	-
9.2(Striking Test)	-	500	-
3(Dimensions)	-	0	-
4(Material testing)	-	0	-
7(Workmanship and finish)	-	0	-
9.1(Drop Test)	-	0	-
9.2(Striking Test)	-	0	-
3(Dimensions)	-	0	-
4(Material testing)	-	0	-
7(Workmanship and finish)	-	0	-
9.1(Drop Test)	-	0	-
9.2(Striking Test)	-	0	-

17 Feb, 2028

-
Included w.e.f. 05.12.2023

13517

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 4296 : Part 2 (2015)

Tools for pressing: Part 2 punches with cylindrical head and straight or reduced shank (First Revision)

All Grade/Type/Size/Designation as per IS 4296 -2

4370 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions & Tolerance)	-	1500	-
4(Surface Roughness)	-	1250	-
5(Material Testing)	-	1220	- C, Si, Mn, P, S - Rs. 100/- per element - Ni, Cr, V, Mo, Co, W- Rs. 120/- per element
5.2(Hardness (HRC))	-	400	-
4(Dimensions & Tolerance)	-	0	-
4(Surface Roughness)	-	0	-
5(Material Testing)	-	0	-
5.2(Hardness (HRC))	-	0	-

17 Feb, 2028

-
Included w.e.f. 05.12.2023

13518

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 1570 : Part 2 (1979)

Schedules for wrought steels: Part 2 carbon steels (Unalloyed Steels)

Grade/Type/Size/Designation as per IS 1570 (Part-II)

11140 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-2Table-3,Table-4,Table-5,Table-6,Table-7,Table-8(Izod Impact value,Min)	-	3540	Chemical testing charges - Rs. 1540/- Limiting Ruling section - 2000/-
Table-2Table-3,Table-4,Table-5,Table-6,Table-7,Table-8(Elongation)	-	4000	Impact test= Rs. 4000/-
Table-2Table-3,Table-4,Table-5,Table-6,Table-7,Table-8(Yield strength, Min)	-	3300	TS
Table-2Table-3,Table-4,Table-5,Table-6,Table-7,Table-8(Tensile strength)	-	300	-
Table-2Table-3,Table-4,Table-5,Table-6,Table-7,Table-8(Izod Impact value,Min)	-	0	-
Table-2Table-3,Table-4,Table-5,Table-6,Table-7,Table-8(Elongation)	-	0	-
Table-2Table-3,Table-4,Table-5,Table-6,Table-7,Table-8(Yield strength, Min)	-	0	-
Table-2Table-3,Table-4,Table-5,Table-6,Table-7,Table-8(Tensile strength)	-	0	-

17 Feb, 2028

-
Included w.e.f. 05.12.2023

13519

Electronic Regional Test Laboratory (North) - ERTL (STQC), Delhi

8101924

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

45500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.0(Resistance to Heat , fire and tracking)	-	45500.00	-
6.0(Marking)	-	2000	-
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
7.0(Construction)	-	5000	-
8.0(Creepage Distance and Clearances)	-	3000	-
10.0(Terminals)	-	6000	-
11.0(External & Internal Wiring)	-	3000	-
12.0(Protection against electric shock)	-	3000	-
13.0(Endurance Tests and Thermal Tests)	-	23000	-
14.0(Resistance to Dust & Moisture)	-	12000	-
15.0(Insulation Resistance and Electric Strength)	-	6000	-

31 Dec, 2026

-
-

13520

Electronic Regional Test Laboratory (North) - ERTL (STQC), Delhi

8101924

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

45500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Cap temperature rise)	-	23000.00	Test to be carried out on 5 Specimen
7(Protection against accidental contact with live parts)	-	3000.00	-
8(Insulation Resistance and Electric Strength)	-	42000.00	IR & HV Test carried out on 25 Samples after Humidity Treatment for 48Hrs.
12(Resistance to Flame and Ignition)	-	10000.00	Glow Wire test carried on Cap at 650± 10 °C
5(Marking)	-	3000.00	Test carried out on 25 Samples
6(Interchangeability)	-	9000.00	-
11(Resistance to Heat)	-	7000.00	-
13(Fault conditions)	-	13500.00	Test carried out on 5 Samples
14(Creepage distances and clearances)	-	3000.00	-
4(General requirement and General test requirements)	-	0	By Inspection and documentation
9(Mechanical strength)	-	8000.00	-
6(Interchangeability)	-	-	-

31 Dec, 2026

-
-

13521

BIS, Eastern Regional Laboratory (ERL)

None

IS 5518 (1996)

Steels for die blocks for drop forging - Specification (Second Revision)

For all designations except for the tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2 (Carbon)	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2 (Manganese)	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2 (Silicon)	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2 (Sulphur)	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2 (Phosphorus)	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2 (Chromium)	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2 (Nickel )	-
Clause No.7.1 to 7.3 and 11.1 Table 1 and 2 (Molybdenum)	-
6 (Freedom from defects)	-
9 (Hardness)	-
12 (Dimensional Tolerances)	-
15 (a) Macro etch test in accordance with IS 11371 : 1985; b) Cleanliness test as per IS 10138 (Part 1) : 1992, IS 10138 (Part 2) : 1983 and IS 10138 (Part 3) : 1983; and c) Distribution of carbides as per IS 12211 : 1987.)	-
14 (Ultasonic Test)	-

-
Excluding Sn, W, Co

13522

BIS, Eastern Regional Laboratory (ERL)

None

IS 6623 (2004)

High Strength Structural Nuts

For all sizes except for the test mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 Table-1 (Dimensions- d)	-
4.1 Table-1 (Dimensions- p)	-
4.1 Table-1 (Dimensions- da)	-
4.1 Table-1 (Dimensions- dw)	-
4.1 Table-1 (Dimensions- e)	-
4.1 Table-1 (Dimensions- m)	-
4.1 Table-1 (Dimensions- m'')	-
4.1 Table-1 (Dimensions- c)	-
4.1 Table-1 (Dimensions- s)	-
5.1 Table-2 (Rockwell Hardness)	-
7.1 (Surface discountinuties test)	-
6.2 (Finish)	-

-
Excluding Critical dimension, Pitch length, Cantilever test, anti seizing test

13523

SWASTIK ELECTRONICS TESTING CENTRE (OPC) PVT. LTD., GHAZIABAD

8163826

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.4(General Test Requireements)	-	500	-
21.5(Classification of Luminaires')	-	500	-
21.6(Marking)	-	4000	-
21.7(Construction)	-	4000	-
21.8(Creepage Distance and Clearances)	-	4000	-
21.9(Provision for earthing)	-	4000	-
21.10(Terminals)	-	4000	-
21.11(External & Internal Wiring)	-	4000	-
21.12(Protection against electric shock)	-	4000	-
21.13(Endurance Tests and Thermal Tests)	-	4000	-
21.14(Resistance to Dust & Moisture)	-	4000	-
21.15(Insulation Resistance and Electric Strength)	-	4000	-
21.16(Resistance to Heat , fire and tracking)	-	4000	-

15 May, 2028

-
Included w.e.f. 17.05.2023

13524

BIS, Central Laboratory (CL)

None

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

Rs.9800/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Classification- IS 302-1 )	-
6 (Classification- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.3 (Marking- IS 302-1)	-
7.4 (Marking- IS 302-1)	-
7.6 (Marking- IS 302-1)	-
7.7 (Marking- IS 302-1)	-
7.8 (Marking- IS 302-1)	-
7.11 (Marking- IS 302-1)	-
7.12 (Marking- IS 302-1)	-
7.13 (Marking- IS 302-1)	-
7.14 (Marking- IS 302-1)	-
7.15 (Marking- IS 302-1)	-
7.101 (Marking)	-
8 ( Protection Against Electric Shock, IS 302-1)	-
10 (Power Input and Current, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
15.1 (Moisture Resistance, IS 302-1)	-
15.2 (Moisture Resistance, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
17 (Overload protection of Transformers and Associated Circuits, IS 302-1)	-
19.7 (Abnormal Operation, IS 302-1)	-
19.8 (Abnormal Operation, IS 302-1)	-
19.9 (Abnormal Operation, IS 302-1)	-
19.1 (Abnormal Operation, IS 302-1)	-
19.101 (Abnormal Operation)	-
19.102 (Abnormal Operation)	-
20.1 (Stability & Mechanical Hazards, IS 302-1)	-
20.2 (Stability & Mechanical Hazards, IS 302-1)	-
20.101 (Stability & Mechanical Hazards)	-
20.102 (Stability & Mechanical Hazards)	-
20.103 (Stability & Mechanical Hazards)	-
20.104 (Stability & Mechanical Hazards)	-
20.105 (Stability & Mechanical Hazards)	-
20.106 (Stability & Mechanical Hazards)	-
20.107 (Stability & Mechanical Hazards)	-
20.108 (Stability & Mechanical Hazards)	-
20.109 (Stability & Mechanical Hazards)	-
20.110 (Stability & Mechanical Hazards)	-
20.111 (Stability & Mechanical Hazards)	-
20.112 (Stability & Mechanical Hazards)	-
20.113 (Stability & Mechanical Hazards)	-
20.114 (Stability & Mechanical Hazards)	-
20.115 (Stability & Mechanical Hazards)	-
20.116 (Stability & Mechanical Hazards)	-
21.1 (Mechanical Strength, IS 302-1)	-
21.2 (Mechanical Strength, IS 302-1)	-
22 (Construction, IS 302-1)	-
22.101 (Construction)	-
22.102 (Construction)	-
23.1 (Internal Wiring, IS 302-1)	-
23.2 (Internal Wiring, IS 302-1)	-
23.3 (Internal Wiring, IS 302-1)	-
23.4 (Internal Wiring, IS 302-1)	-
23.5 (Internal Wiring, IS 302-1)	-
23.6 (Internal Wiring, IS 302-1)	-
23.7 (Internal Wiring, IS 302-1)	-
23.8 (Internal Wiring, IS 302-1)	-
23.9 (Internal Wiring, IS 302-1)	-
23.10 (Internal Wiring, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.2 (Components, IS 302-1)	-
24.5 (Components, IS 302-1)	-
24.6 (Components, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.5 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.6 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.7 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.8 (Supply Connection and External Flexible Cords, IS 302-1)	-
26.9 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.11 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.12 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.13 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.15 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.16 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.17 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.18 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.19 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.2 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.21 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.22 (Supply Connection and External Flexible Cords, IS 302-1)	-
26 (Terminals for External Conductors, IS 302-1)	-
27 (Provision for Earthing, IS 302-1)	-
27.2 (Provision for Earthing, IS 302-1)	-
27.3 (Provision for Earthing, IS 302-1)	-
27.4 (Provision for Earthing, IS 302-1)	-
27.5 (Provision for Earthing, IS 302-1)	-
28 (Screws & Connections, IS 302-1)	-
29.1 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
29.2 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
30.1 (Resistance to Heat and Fire, IS 302-1)	-
30.2 (Resistance to Heat and Fire, IS 302-1)	-
31 (Resistance of Rusting, IS 302-1)	-
32 (Radiation, Toxicity and similar Hazard IS 302-1)	-

-
Complete for 1. Hand Blender,2. Centrifugal Juicer, 3. Food Mixer, 4. Citrus-fruit squeezers, 5. Shredders, 6. Churns, Except electronic circuit type appliances(Cl.19.11 of IS 302 part 1)

13525

BIS, Western Regional Laboratory (WRL)

None

IS 7593 : Part 1 (1986)

Specification for power - Operated pneumatic sprayer - Cum - Duster: Part 1 knapsack type (First Revision)

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.1 (A filling hole of 90 mm Minimum diameter if circular or in minor axis if oval , shall be provided on the top of the tank.)	-
(Cl 8.1) (Cl 8.1) (Marking)	-
Cl.5.1 (The hole shall be covered with a cap or lid so that no leakage of the liquid or dusting powder takes place during the mounting of the sprayer – cum duster and during its operation .)	-
Cl.5.1 (The tank capacity shall be not less than 0.01 m 3.)	-
Cl.5.1 (The total tank capacity shall not differ by more thtan 5 percent of the declared value.)	-
Cl.5.1 (When the liquid or dusting powder is filled in tank up to its total capacity , the tank shall not show any sign of leakage and shall not buckle)	-
b)Impeller (Cl 5.2) (The impeller of the fan shall be dynamically balanced at its rated speed . The impeller shall)	-
b)Impeller (Cl 5.2) (not touch casing at any point)	-
c)Air Bend Outlet,Cl.5.3 (An air bent outlet may be provided. If provided , it shall be connected with fan casing outlet , air hose and air pressure regulating device.)	-
Air PressureRegulating Device (Cl.5.4) (An air pressure regulating device shall be provided while the unite is used for dusting and may or may not be present while spraying liquid .)	-
Flow Regulator(Cl.5.6) (A device to regulate the flow of the liquid or dusting powder shall be provided)	-
(Cl.5.6) (An air hose of minimum 45 mm inside diameter and not less than 500 mm in length shall be provided.)	-
(Cl.5.6) (In case of rubber hose, it shall conform to the requirements as given in IS 446-1980.)	-
Straps(Cl.5.8) (Two straps of not less then 800 mm length after its maximum adjustment and 38 mm width shall be provided in order to help carriage of the unit.)	-
Straps(Cl.5.8) (Provision for adjustment of each strap shall be made)	-
Straps(Cl.5.8) (A cushion of minimum 40mm width and 20mm thickness with each strap at least on the portion that rests on the operator’s shoulder, and a back rest shall be provided at the option of the purchaser.)	-
Straps(Cl.5.8) (The back rest may be fitted with a cushion of minimum size of 200 × 200 × 20 mm .)	-
Straps(Cl.5.8) (The cushion , when provided , shall be covered with suitable materials , such as cotton , canvas rexin, and PVC or plastic coated fabrics)	-
Straps(Cl.5.8) (The straps and their assembly shall withstand the test prescribed in 7.3 of IS 10134-1994)	-
Prime mover (Cl.5.9) (The engine shall confirm to the requirements as given in IS 7347-1974)	-
Prime mover (Cl.5.9) (The exhaust outlet of the engine shall be so positioned that the smoke does not directly affect the operator or crop.)	-
Level Fuel Control (Cl.5.9) (The fuel and chemical discharge controls shall be in easy access of the operator)	-
Total Mass Cl.5.11 (Total mass shall be not more than 13 kg. mass of the engine shall not exceed 5 kg)	-
Overall dimensions Cl.5.12 (Total length -500mm Max.)	-
Overall dimensions Cl.5.12 (Total width-600mm Max.)	-
Overall dimensions Cl.5.12 (Total height -750mm Max)	-
a) Air Output (Cl. 4.1) (When tested in accordance with the method given in 5.1 of IS 12482-1988 at its rated speed , the fan shall be capable of delivering minimum of 6m 3 of air per minute and the air velocity shall be not less than 60 meters per second.(63 m/sec declared))	-
b)Liquid discharge rate Cl.4.2 (When tested in accordance with the method given in B-1 , the sprayer shall be capable of discharging from 0.3 to 2 litres of liquid per minute with an adjustable nozzle not exceeding 4.)	-
b)Liquid discharge rate Cl.4.2 (Setting of Nozzle Declared Value( Litre/ minute))	-
b)Liquid discharge rate Cl.4.2 (I 0.50)	-
b)Liquid discharge rate Cl.4.2 (II 1.00)	-
b)Liquid discharge rate Cl.4.2 (III 1.50)	-
b)Liquid discharge rate Cl.4.2 (IV 2.00)	-
Variation of Discharge rate Cl.4.3 (When tested in accordance with the method given in B-2, the variation in discharge due to tank filling at one –fourth, one-half and three-fourth of total capacity shall not exceed 15% of the discharge at total capacity of the tank as obtained in B-1.)	-
b)Liquid discharge rate Cl.4.2 (Setting of Nozzle Declared Value( Litre/ minute))	-
Variation of Discharge rate Cl.4.3 (I)	-
Variation of Discharge rate Cl.4.3 (II)	-
Variation of Discharge rate Cl.4.3 (III)	-
Variation of Discharge rate Cl.4.3 (IV)	-
Dust Discharge Rate Cl.4.4 (When tested in accordance with the method given in B-3, the duster shall be capable of discharging a minimum of 0.5 kg dusting powder per minute.)	-
Dust Discharge Rate Cl.4.4 (The provision for graduations showing ¼, ½, ¾ and full opening positions shall be made.)	-
Endurance test Cl.5.14 (The sprayer – cum duster shall withstand the test prescribed in B-4. At rated speed for Min. 48 hour)	-
Workmanship and finish Cl.7 (All the components of the unit shall be free from burrs, pits and other visual defects which may be detrimental for their use The exposed metallic parts shall have a protective coating to prevent surface deterioration.)	-
Other requirements, Cl.6.1 (Each Sprayer- cum- duster shall be provided with operational and maintenance manual. The manual shall include complete list of regular and optional parts , method of converting the sprayer into duster , instructions for disassembly and cleaning , instructions for routine inspections , and adjustments and replacement of parts and instructions for safe handling .)	-
Spare p[arts Cl.6.2 (A set of gaskets, one funnel with a strainer having aperture size of 300 to 425 micron, a measuring cylinder for lubricating oil and a set of necessary tools shall be provided.)	-

-
Test facility not available for the following: One piece out of 4 pieces should be short circuited

13526

Central Institute of Petrochemicals Engineering & Technology (CIPET), Murthal

9121934

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

09 Aug, 2028

-
-

13527

CIPET, Hyderabad

6111634

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

up to 1200 mm

20975 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Resistance to External Blows at 0°C)	-	1300	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	-
9.1(PIPE ENDS)	-	300	-
8(SEALING RINGS)	-	300	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	250	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	250	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	250	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	250	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	250	-
5(CLASSIFICATION OF PIPES)	-	250	-
10.7(Sulphated Ash Content)	-	950	-
10.3(Effect on Water Test)	-	0	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	250	-

23 Feb, 2027

-
Exclusion: VCM Content test.

13528

BIS, Central Laboratory (CL)

None

IS 1363 : Part 2 (2018)

Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 2 Hexagon Head Screws ( Size Range M 5 to M 64 ) ( Fifth Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5 (Designation)	-
Cl. 3, Table 1 & 2 (Dimensions)	-
Cl. 3, Table 1 & 2 (Dimensions)	-
Cl. 3, Table 1 & 2 (Dimensions)	-
Cl. 3, Table 1 & 2 (Dimensions)	-
Cl. 3, Table 1 & 2 (Dimensions)	-
Cl. 3, Table 1 & 2 (Dimensions)	-
Cl. 3, Table 1 & 2 (Dimensions)	-
Cl. 3, Table 1 & 2 (Dimensions)	-
Cl. 3, Table 1 & 2 (Dimensions)	-
Cl. 3, Table 1 & 2 (Dimensions)	-
Cl. 3, Table 1 & 2 (Dimensions)	-
Cl. 3, Table 1 & 2 (Dimensions)	-
Cl. 3, Table 1 & 2 (Dimensions)	-
Cl. 4 (General requirements)	-
Cl. 4 (General requirements)	-
Cl. 4 (General requirements)	-
Cl. 4 (General requirements)	-
Cl. 4 (Thread)	-
Cl. 4 (Mechanical Properties Ref.IS 1367 (Part 3))	-
Cl. 4 (Mechanical Properties Ref.IS 1367 (Part 3))	-
Cl. 4 (Mechanical Properties Ref.IS 1367 (Part 3))	-
Cl. 4 (Mechanical Properties Ref.IS 1367 (Part 3))	-
Cl. 4 (Mechanical Properties Ref.IS 1367 (Part 3))	-
Cl. 4 (Mechanical Properties Ref.IS 1367 (Part 3))	-
Cl. 4 (Mechanical Properties Ref.IS 1367 (Part 3))	-
Cl. 4 (Mechanical Properties Ref.IS 1367 (Part 3))	-
Cl. 4 (Mechanical Properties Ref.IS 1367 (Part 3))	-
Cl. 4 (Mechanical Properties Ref.IS 1367 (Part 3))	-
Cl. 4 (Mechanical Properties Ref.IS 1367 (Part 3))	-
Cl. 4 (Mechanical Properties Ref.IS 1367 (Part 3))	-
Cl. 4 (Mechanical Properties Ref.IS 1367 (Part 3))	-
Cl. 5 (Finish - Coating Ref. ISO 4042 & ISO 10683)	-

-
-

13529

BIS, Central Laboratory (CL)

None

IS 411 (2020)

Titanium Dioxide, Anatase, for Paints — Specification ( Fourth Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.3, Table-1(ii) (Volatile matter)	-
Cl.4.3,Table-1(iii) (Residue on 45 micron IS sieve)	-
Cl.4.3,Table-1(iv) (Oil absorption)	-
Cl.4.3,Table-1(v) (Colour)	-
Cl.4.3,Table-1(vi) (Reducing power)	-
Cl.4.3,Table-1(vii) (Relative density at 27°C)	-
Cl.4.3,Table-1(viii) (Matter insoluble in water)	-
Cl.4.3,Table-1(ix) (pH of pigment slurry)	-
Cl.4.3,Table-1(x) ("volatile matter at 105°C after 24 h preconditioning at (23 ± 2)°C and (50 ± 5) percent relative humidity")	-
Cl.4.3,Table-1(xi) (resistivity of aqueous extract (Ω.m))	-
Cl.4.3,Table-1(xii) ("Scattering power of titanium dioxide compared with standard sample")	-
Cl.4.1 (Description)	-
Cl.4.3, Table-1(i) (Titanium dioxide)	-

-
Test facility is not available for mentioned exclusiosn parameters. For parameters residue on sieve, oil absorption, color, reducing power required approved sample and declarations. Excluding Description, Composition, TiO2 content, Matter soluble in water, Resistivity of aqueous extract, Scattering power of TiO2.

13530

BIS, Central Laboratory (CL)

None

IS 1919 (2024)

Sodium Hydrosulphite - Specification (Second Revision)

Rs. 4560/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.3.1 (Description)	-
Table-1(i) (Sodium hydrosulphite)	-
Table-1(ii) (Bulk density)	-
Table-1(v) (Heavy metals (as Pb))	-
Table-1(vi) (Sodium formate(as HCOONa))	-
Table-1(vii) (Methanol(as CH3OH))	-
Table-1(viii) (Sodium oxalate (Na2C2O4))	-
Table-1(iii) (Zinc (as Zn))	-
Table-1(iv) (Mercury (as Hg))	-

-
Excluding Table 1 (iii) Zinc

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found