BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15617 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

13771

BIS, Eastern Regional Laboratory (ERL)

None

IS 4368 (1967)

Specification for alloy steel billets, blooms and slabs for forging for general engineering purposes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Diameter, Ovality & Weight)	-
Cl 11 (Hardness & Tensile Test)	-
Cl 11.6 (Additional Tests)	-

-
Except V, Al, Sn

13772

BIS, Central Laboratory (CL)

None

IS 623 (2008)

Bicycle - Bicycle frames - Specification (Third Revision)

Rs. 3477/- excluding Threads. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (DIMENSIONS)	-
4.1 (FRAME TUBES )	-
5 (MANUFACTURE)	-
6 (FINISH)	-
7.1 (a) TRUENESS OF FRAME)	-
7.3 (d) TEST FOR FINISH)	-

-
Excluding 4.2 Screw Threads, 7.1 Trueness of Frame, 7.2 Impact Test on Frame-Fork Assembly

13773

BIS, Central Laboratory (CL)

None

IS 6803 (1972)

Specification for special proofed canvas and duck

11297 View breakup
Rs. 11297/- + testing charges as per referred ISS (excluding Pressure head test).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.2.3 (pH Value)	-
Cl. 3.2.1 , Appendix A-1 (Proofing Content)	-

-
-

13774

BIS, Central Laboratory (CL)

None

IS 9271 (2004)

Unplasticized polyvinyl chloride (UPVC) single wall corrugated pipes for drainage - Specification (First Revision)

1800/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.2 (Density-When tested in accordance with ]S 13360 (Part 3/Sec 1), the densi of the pipe shall be between 1.40 and 1.46 gm/cm3 .)	-
8.1.1 (Visual Appearance, Workmanship and Finish)	-
8.1.2 (Visual Appearance, Workmanship and Finish)	-
7.2, 8 (Wall Thickness)	-
7, Table 1 (DIMENSIONS AND TOLERANCE-The nominal outside diameter and tolerances of the corrugated pipes shall be as per Table 1)	-
7.4.3 (Perforation Requirement-The heght of corrugation -The depth of corrugations shall be 3 percent, Min of nominal outside diameter (dn).)	-

-
Excluding Test Fcility not available for Cl 8.3 Pipe stiffness, Cl 8.4 Impact strength at o Degree C, Cl 8.5 Elongation Test, Cl 8.6 Bending Test, Cl 8.7 Joints (optional)

13775

BIS, Central Laboratory (CL)

None

IS 14106 (2018)

Direct action hand pumps - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Visual tests: All the pumps shall be examined for workmanship, finish and visual defects.)	-
6.2.2 (i) Aligment of groove in top guide bush with respect to the nuts welded on pump body)	-
6.2.2 (ii) Aligment of handle nut with pipe for concentricity)	-
6.2.2 (iii) Location of holes in the pump head flange with respect to the direction of the spout)	-
6.2.2 (iv) Reasonable flatness of the flanges to provide proper matching of the holes to ensure unrestricted insertion of the bolts )	-
6.2.2 (v) Matching of faces indicated in respective figures of piston plate, follower plate and foot valve body)	-
6.2.2 (vi) Concentricity of the two internal diameter of the reducing socket)	-
6.3.1 (Routine test)	-
6.4 (Test for Joints)	-
6.4 (Pump Rod)	-
6.4 (Riser Pipe)	-
6.4 (Upper casing and lower casing)	-
6.4 (Load test )	-
4.4 & Table 2 (Bell Dimensions, mm)	-
4.4 & Table 2 (Bell Dimensions for Upper casing pipe)	-
4.4 & Table 2 (a)Socket Depth)	-
4.4 & Table 2 (b) Mean socket internal dia at mouth)	-
4.4 & Table 2 (c) Mean socket internal diameter at root )	-
4.4 & Table 2 (Bell Dimensions for Lower casing pipe)	-
4.4 & Table 2 (a)Socket Depth)	-
4.4 & Table 2 (b) Mean socket internal dia at mouth)	-
4.4 & Table 2 (c) Mean socket internal diameter at root )	-
4.4 & Table 2 (Bell Dimensions for Sand Trap)	-
4.4 & Table 2 (a)Socket Depth)	-
4.4 & Table 2 (b) Mean socket internal dia at mouth)	-
4.4 & Table 2 (c) Mean socket internal diameter at root )	-
6.2.3 (Dimensional tests, Pump head, mm)	-
6.2.3 (Pump head flange)	-
6.2.3 (Pump stand)	-
6.2.3 (Intermediate flange)	-
6.2.3 (Grommet)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Top Guide Bush)	-
6.2.3 (Handle)	-
6.2.3 (Handle Cushion Top)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Bottom Cushion)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Handle Retainer)	-
6.2.3 (Top Connector)	-
6.2.3 (Male Adapter)	-
6.2.3 (Female Adapter)	-
6.2.3 (Piston Plate)	-
6.2.3 (Follower Plate)	-
6.2.3 (Piston Fap Valve)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Cup Seal)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Bottom Connector)	-
6.2.3 (Grapple Parts)	-
6.2.3 (Foot Valve Body)	-
6.2.3 (O Ring)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Flap Valve)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Foot valve Guide)	-
6.2.3 (Threaded Coupler(M))	-
6.2.3 (Threaded Coupler(F))	-
6.2.3 (Riser Pipe Centralizer)	-
6.2.3 ( Shore Hardness on Scale A)	-
6.2.3 (O Ring)	-
6.2.3 (Foot Valve Retainer)	-
6.2.3 (Rubber Seat)	-
6.2.3 (Shore Hardness on Scale A)	-
6.2.3 (Reducing Sdocket (Alternate Design))	-
6.2.3 (Well Screen (alternate))	-
6.2.3 (Screen Coupler)	-
6.2.3 (Sand Trap)	-
6.2.3 (Cutter)	-
6.2.3 (Retrieving Rod)	-
6.2.3 (Combination Spanner)	-
5.2(a) (Mass of Zinc coating,g/m2)	-
5.2(a) (Adhesion of coating)	-
5.2(a) (Galvanizing of Head)	-
5.2(b) (Galvanizing of Handle)	-
5.2(b) (Mass of Zinc coating,g/m2)	-
5.2(b) (Adhesion of coating)	-
5.2© (Galvanizing of Stand)	-
5.2© (Mass of Zinc coating,g/m2)	-
5.2© (Adhesion of coating)	-
5.2(d) (Galvanizing of Intermediate Flange)	-
5.2(d) (Mass of Zinc coating,g/m2)	-
5.2(d) (Adhesion of coating)	-
4.2 (Mean Outside Diameter)	-
4.2 (Wall Thickness)	-
4.2 (Length)	-
4.2 (Visual Appearance)	-
4.2 (Test for Internal Diameter)	-
4.2 (Specific Gravity)	-

-
-

13776

BIS, Central Laboratory (CL)

None

IS 702 (1988)

Specification for indusrial bitumen (Second Revision)

- View breakup
Hence complete testing charges for the product are Rs.6300..00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 and 6.1 Table 1 (Specific Gravity, 85/25)	-
5.1 and 6.1 Table 1 (Specific Gravity, 85/40)	-
5.1 and 6.1 Table 1 (Specific Gravity, 90/15)	-
5.1 and 6.1 Table 1 (Specific Gravity, 115/15)	-
5.1 and 6.1 Table 1 (Specific Gravity 135/10)	-
5.1 and 6.1 Table 1 (Specific Gravity 155/6)	-

-
-

13777

BIS, Central Laboratory (CL)

None

IS 7283 (1992)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

Rs 1500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Workmanship)	-
Cl 7 (Diameter & Out Of Round)	-
Cl 5 (Material Test)	-

-
Since the composition of steel is mutually agreed basis , as such element to be tested with specified requirement and tolerances if any may please be declared with method of testing. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm. Excluding i] cl 8 decarburization, ii] cl 11 grain size

13778

BIS, Central Laboratory (CL)

None

IS 16088 (2012)

Chlorinated polyvinyl chloride (CPVC) pipes for automatic sprinkler fire extinguishing system - Specification

5400 View breakup
Rs. 5400/- (excluding Compound chlorine content, Fire exposure test, Flammability test, Resistance to external blows at 0oC, Kinking resistance test and CPVS fire sprinkler pipes and fittings) + testing charges as per referred ISS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.5 IS 12235(Part 2) (Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-
9.3 (Reversion test : )	-
9.5 (Density)	-
8 (Pipe Ends)	-
7.1.1 IS 12235 (Part 1) Table 1 (Mean outside Diameter)	-
7.1.1.1 IS 12235 (Part 1) Table 1 (Outside Diameter at any point)	-
7.1.2 (Wall Thickness)	-
10.3 (Flattening)	-
10.4 (Tensile Strength)	-
9.1 (Visual Appearance)	-
5 (Classification of pipes)	-

-
Excluding Testing Facility not avaialble for Cl.9.6 Fire exposure test, cl. 9.7 Flammability Test, cl.10.1 hydrostatic Characterstics, Cl 10.2 resistance to external Blow At 0 °C, Cl. 10.3 flattening Test, Cl.10.5 Kinking Resistance Test, Cl. 10.7 Vibration Test (Type Test)

13779

BIS, Central Laboratory (CL)

None

IS 14268 (2022)

Uncoated stress relieved low relaxation seven-wire (ply) strand for prestressed concrete -Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.2 (Carbon)	-
4.1.2 (Silicon)	-
4.1.2 (Manganese)	-
4.1.2 (Sulphur)	-
4.1.2 (Phosphorus)	-
4.1.2 (Chromium)	-
4.1.2 (Nickel)	-
4.1.2 (Molybdenum)	-
4.1.2 (Copper)	-
4.1.2 (Aluminum)	-
4.1.2 (Sulphur + Phosphorus)	-
4.1.2 (Boron)	-
4.1.2 (Titanium)	-
4.1.2 (Niobium)	-
4.1.2 (Vanadium)	-
4.1.2 (Titanium+Niobium+Vanadium)	-
4.1.2 (Nitrogen)	-
4.5 (Workmanship and Finish)	-
6(Table 2) (Diameter)	-
6(Table 2) (Tensile Strength)	-
6(Table 2) (Cross Sectional Area)	-
6(Table 2) (Mass Per Meter)	-
4.5 (Workmanship and Finish)	-

-
Excluding i] cl 6.2.2 breaking strength & 0.2 % Proof stress, ii] cl 6.2.3 elongation, iii] cl 6.2.4 relaxation properties

13780

BIS, Central Laboratory (CL)

None

IS 916 (2000)

Square tins for solid products - Specification (Fourth Revision)

4950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Capacity)	-
4.2 (Dimension and Tolerances)	-
4.3.1 (Nominal Thickness)	-
4.3.2 (Handle wire diameter)	-
4.3.2 (Handle wire material)	-
4.4.1 (Body)	-
4.4.2 (Sides)	-
4.4.3 (Top and Bottom)	-
4.4.4 (Top and Bottom embossing)	-
4.4.5 (Handle)	-
4.4.6 (Closure)	-
4.4.7 (Supply condition)	-
4.4.8 (Internal Finish)	-
4.4.9 (External Treatment)	-
5.1 (Air-Pressure Test)	-
5.2 (Handle Pull Test)	-

-
Excluding 5.1 Air-Pressure Test, 5.2 Handle Pull Test,

13781

BIS, Central Laboratory (CL)

None

IS 9282 (2002)

Wire ropes and strands for suspension bridges - Specification (First Revision)

Rs. 3000/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.1 ( MATERIAL- Requirements of Wire -Dimensional Limits and Tolerances )	-
4.2.2 (Tensile Test)	-
4.3 (Elongation Test )	-
4.5.1 (Galvanizing)	-
4.5.2 (Wrap Tes)	-
5 (GENERAL REQUIREMENTS General requirements shall be according to IS 6594.)	-
6.1 (JOINTS)	-
7.1 ( DIRECTION OF LAY)	-
8.1 (LENGTH OF LAY)	-
10. table 1 to 11 (MINIMUM BREAKING FORCE )	-
Clasuse - 4 ( CARBON)	-
Clasuse - 4 (SULPHUR)	-
Clasuse - 4 (PHOSPHURS)	-
Clasuse - 4 (MANGANESE)	-
Clasuse - 4 (SILICON)	-
Clasuse - 4 ( ALUMINIUM)	-
Clasuse - 4 (NITROGEN)	-
Clasuse - 4 (Nickel)	-
Clasuse - 4 (Chromium)	-
Clasuse - 4 (Molybdenum)	-
Clasuse - 4 (NIOBIUM)	-
Clasuse - 4 (VANADIUM)	-
Clasuse - 4 (TITANIUM)	-

-
EXCLUDING -; i] cl 10 minimum breaking force, ii] cl 11 elongation or stretch

13782

BIS, Central Laboratory (CL)

None

IS 4109 (1967)

Specification for kadahies

Rs. 750/- and testing charges as per referred Iss View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (Materials)	-
3 (a) Round Shape / Bowl Shape)	-
3 (b) Nominal dia. at top D1 mm)	-
3 (c) Nominal overall Height H1 mm)	-
3 (d) Thickness at bottom mm Min)	-
4 (Manufacture and Workmanship)	-
6 (Test)	-

-
-

13783

BIS, Central Laboratory (CL)

None

IS 285 (1992)

Laundry soaps - Specification (Third Revision)

5300 View breakup
For Type 1 -Rs.6000/-, For Type 2 Gr.1- Rs.4800/-, For Type 2 Gr.2-Rs.5100/- Average testing charges (all types and grades)-Rs.5300.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.4, Table-1 (ix) Type-2 (Built soap) Gr-2 (LSD/NSD content, IS 4955)	-
5.4, Table-1 (viii) Type-2 (Built soap) Gr-1 & Gr-2 (Chloride (as sodium chloride), IS 286)	-
5.4, Table-1 (viii) Type-1 (Pure soap) (Chloride (as sodium chloride), IS 286)	-
5.4, Table-1 (vii) Type-1 (Pure soap) (Glycerol, IS 286)	-
5.4, Table-1 (v) Type-2 (Built soap) Gr-1 (Matter insoluble in alcohol, IS 286)	-
5.4, Table-1 (v) Type-1 (Pure soap) (Matter insoluble in alcohol, IS 286)	-
5.4, Table-1 (iv) (Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-
5.4, Table-1 (iii) (Unsaponified fatty matter, IS 286)	-
5.4, Table-1 (ii) (Rosin acids, percent by mass of total fatty matter, IS 286 )	-
5.4, Table-1 (i) Type-2 (Built soap) Gr-2 (Total fatty matter, IS 286)	-
5.4, Table-1 (i) Type-2 (Built soap) Gr-1 (Total fatty matter, IS 286)	-
5.4, Table-1 (i) Type-1 (Pure soap) (Total fatty matter, IS 286)	-
5.3 (Odour and Lathering Properties, IS 286)	-
5.4, Table-1 (ix) Type-2 (Built soap) Gr-2 (LSD/NSD content, IS 4955)	-
5.4, Table-1 (viii) Type-2 (Built soap) Gr-1 & Gr-2 (Chloride (as sodium chloride), IS 286)	-
5.4, Table-1 (viii) Type-1 (Pure soap) (Chloride (as sodium chloride), IS 286)	-
5.4, Table-1 (v) Type-2 (Built soap) Gr-1 (Matter insoluble in alcohol, IS 286)	-
5.4, Table-1 (v) Type-1 (Pure soap) (Matter insoluble in alcohol, IS 286)	-
5.4, Table-1 (iv) (Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-
5.4, Table-1 (iii) (Unsaponified fatty matter, IS 286)	-
5.4, Table-1 (ii) (Rosin acids, percent by mass of total fatty matter, IS 286 )	-
5.4, Table-1 (i) Type-2 (Built soap) Gr-2 (Total fatty matter, IS 286)	-
5.4, Table-1 (i) Type-2 (Built soap) Gr-1 (Total fatty matter, IS 286)	-
5.4, Table-1 (i) Type-1 (Pure soap) (Total fatty matter, IS 286)	-
5.3 (Odour and Lathering Properties, IS 286)	-

-
-

13784

BIS, Central Laboratory (CL)

None

IS 9165 : Part 2 (1992)

Surgical instruments - Needles, suture: Part 2 eyed needles - Sizes, shapes and dimensions

Rs.10030/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1, Table 1 (Dimensions of Eyed Suture Needles)	-
3.1, Table 1 (Dimensions of Eyed Suture Needles)	-

-
-

13785

BIS, Central Laboratory (CL)

None

IS 12650 (2018)

Textiles – Jute bags for packing 50 kg foodgrains – Specification (third revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4-4.2 (Manufacture-The number of stitches per decimeter shall be 10 ±1.)	-
4-4.3 (Manufacture-Safety Stitch-The number of safety union stitches per decimetre shall be10 ± 1.)	-
4-4.1 (MANUFACTURE- The bags shall be made from single piece of twill weave jute sacking of uniform construction having nominal mass of 579 g/m2 as given below with warp running along the length of the bag:)	-
4-4.2 (Manufacture-The number of stitches per decimeter shall be 10 ±1.)	-
4-4.3 (Manufacture-Safety Stitch-The number of safety union stitches per decimetre shall be10 ± 1.)	-
4-4.1 (MANUFACTURE- The bags shall be made from single piece of twill weave jute sacking of uniform construction having nominal mass of 579 g/m2 as given below with warp running along the length of the bag:)	-
4-4.1-a) (MANUFACTURE)	-
4-4.1-b) (MANUFACTURE)	-
4-4.1 (MANUFACTURE)	-
4-4.2 (Manufacture)	-
4-4.3 (Manufacture-Safety Stitch )	-
4-4.4 (Manufacture-Hemming at the Mouth )	-
4-4.5 (Manufacture- Freedom from Defects )	-
5-5.1-Table 1-Sr. no. i) (SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 a) Out side Length , cm 94 (For both type A & Type B) Tolerance + 4 / -0 cm)	-
5-5.1-Table 1-Sr. no. i) (SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 b) Outside width, cm 57 (For both type A & Type B) Tolerance + 4 / -0 cm)	-
5-5.1-Table 1-Sr. no.i i) (SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Ends/dm Type A 46 + 2 /Type B 76 + 4 / -3)	-
5-5.1-Table 1-Sr. no.iii) (SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Picks/dm Type A 50 (2 x 25) / Type B 28 + 2)	-
5-5.1-Table 1-Sr. no.iv) (SPECIFIC REQUIREMENTS-Cl. 8.5.2 of IS 9113 Corrected Mass/bag, g ( See Note 2) For both Type A & Type B 665 + 8.0 / -6.0 percent)	-
5-5.1-Table 1-Sr. No.v) (SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): a ) Warpway- 1570 (160) for both type A & Type B)	-
5-5.1-Table 1-Sr. No.v) (SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): b ) Weftway- 1420 (145) for both type A & Type B)	-
5-5.1-Table 1-Sr. No.vi) (SPECIFIC REQUIREMENTS-Cl. 8.7 of IS 9113 Average side seam strength (5 cm ×20 cm raveled strip), Min, N (kgf): 490 (50) for both type A & Type B)	-

-
-

13786

BIS, Central Laboratory (CL)

None

IS 12594 (1988)

Hot - Dip zinc coating on structural steel bars for concrete reinforcement - Specification

2200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 , Table 1 (Mass of Zinc coating , IS 6745)	-
5.2 (Freedom from defects , IS 2629)	-
5.3 (Adhesion of Galvanized coating)	-
Clause - 4, 4.1 (CARBON)	-
Clause - 4, 4.1 (SULPHUR)	-
Clause - 4, 4.1 (PHOSPHURS)	-
Clause - 4, 4.1 (MANGANESE)	-
Clause - 4, 4.1 (SILICON)	-
Clause - 4, 4.1 (ALUMINIUM)	-
Clause - 4, 4.1 (NITROGEN)	-

-
EXCLUDING -; i] cl 5.4 chromating

13787

BIS, Central Laboratory (CL)

None

IS 8074 (1990)

Monocrotophossl - Specification (Second Revision)

Rs.2750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Physical)	-
3.2.1 (Description)	-
3.2.2 (Cold Test)	-
3.2.3 (Flash Point ( Abel ))	-
3.3 (Chemical)	-
3.3.1 (Monocrotophos Content)	-
3.3.1.1 (actual value of the monocrotophos content)	-
3.3.1.2 (average monocrotophos content)	-
3.3.2 (Free Aceto-Acetic Acid Monomethyl-amide ( MMA ) Content)	-
3.3.3 (Acidit)	-

-
-

13788

BIS, Central Laboratory (CL)

None

IS 2414 (2005)

Cycle and rickshaw pneumatic tyres - Specification (Fourth Revision)

Rs.8630/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Type)	-
4.2 (Designation)	-
5.1 & 5.2 (Dimensions)	-
6.1 (Construction)	-
6.2 (Tyre Cord)	-
6.3 (Tyre Casing Strength)	-
6.4 (Bead Wire Joint)	-
6.5 (Requirements of Ruber Compound)	-
6.6 (Adhesion test)	-

-
EXCLUDING -; Performance test

13789

BIS, Eastern Regional Laboratory (ERL)

None

IS 844 : Part 1 (1979)

Specification for screwdrivers: Part 1 techincal supply conditions (Second Revisionn)

375 + ferrule material testing per IS:513 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Hardness)	-
5.1,Table 1 ( Dimension, axb)	-
5.1,Table 1 (t)	-
5.1,Table 1 (r)	-
5.2,Table 2 (l)	-
6.1 (Free from Defects)	-
6.2 (Finish of Handle)	-
6.3 (Alignment )	-
7 (Finish)	-
8.2 (Stricking Test)	-

-
Except Torque

13790

BIS, Eastern Regional Laboratory (ERL)

None

IS 3976 (2018)

Safety Rubber Canvas Boots for Miners Ã¢â‚¬ Specification ( Sixth Revision )

For all types

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2) (requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-
Cl.5.2.3 Coated Binding Material IS 1954 ( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-
Cl.5.2.3 Coated Binding Material Annex C (ii) Breaking load in N, Min (50 cm grip length test specimen) )	-
CL.5.2.10 Counter Stiffener ( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5) ( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-
Cl.5.2.3 Coated Binding Material IS 1954 ( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-
Cl.5.2.1.3 , Cl.6.5 of IS 15298 (Part 1). ( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance with 6.5 of IS 15298 (Part 1).)	-
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-
Cl.5.2.5 Compact Sole Heel 5.2.5.1 IS 3400 (Part 4) (ii)*Change in hardness after accelerated ageing at 100 ± 2 °C for 24 h )	-
Cl.5.2.5.3 Ageing for whole footwear (When rubber is used for manufacturing boots or when the outer sole heel is made of bi-polymer, the finished boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not develop any sign of tackiness or brittleness.)	-
Cl.5.2.9 Eyelets ( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener ( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-
Cl.5.5 Mass (The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-
Cl.5.10 Consolidation Test ( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener ( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-
Cl.5.6 ( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5) ( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-
Cl.6.2 Flexing Resistance of Compact Outsole ( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-
7.2 (Resistance to electricity)	-
Cl. 8 (IS 17011, Table-1 (i)) (Allergenic and carcinogenic disperse dyes)	-

-
Chem- Complete Material declaration required for Innocuousness test. Mech- Complete, Mech Quantity:- 5 Pair + Raw material + Type to be delared + Binding material, Thread, Toecap and eyelet to be provided seperately+ Slab of outsole for tear strength

13791

BIS, Eastern Regional Laboratory (ERL)

None

IS 513 : Part 2 (2016)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

For all grades except the tests mentioned in remarks

- View breakup
for Chemical Rs. 3750/- Testing charges for each of the elements other than Table (Aluminum, Silicon, Nitrogen, Chromium, Nickel, Niobium, Vanadium, Titanium, Molybdenum, Boron, Calcium & other) will be Rs.1004/- For Mechanical Rs. 6900/- Tensile Strain Hardening component, Bake hardening and Surface finished test and Rs.1004/- for each of the elements other than carbon, sulphur, phosphorus and manganese.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.0 (CARBON)	-
6.0 (SULPHUR)	-
6.0 (PHOSPHORUS)	-
6.0 (MANGANESE)	-
6.0 (SILICON)	-
6.0 (NITROGEN)	-
Cl 7 (UTM)	-
Cl 9 (Workmanship)	-
Cl 10 (Length, Width & Thickness)	-
6.0 (ALUMINIUM)	-
8.2 (Erichson cupping test - IS 10175 for CR2, CR3, CR4 Grades from 0.5 - 2.0 mm Thickness)	-
8.3 (Rockwell Hardness test -HRB - IS:1586)	-
8.0 (Surface Roughness)	-
Cl. 10 (Thickness (08))	-
Cl. 10 (Width (04))	-
7.0 & table 3 (Boron as B)	-
7.0 & table 3 (Chromium as Cr)	-
7.0 & table 3 (Nickel as Ni)	-
7.0 & table 3 (Molybdenum as Mp)	-
7.0 & table 3 (Niobium as Nb)	-
7.0 & table 3 (Vanadium as V)	-
7.0 & table 3 (Titanium as Ti)	-
7.0 & table 3 (Calcium as Ca)	-

-
Mech: Except Tensile Strain Hardening Component – n-Value

13792

BIS, Eastern Regional Laboratory (ERL)

None

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

Excluding Scope restricted "for ISC- 510LA, 550LA, 600LA, 700LA, 860LA, ISC-W, ISC-Y, ISC-YH, ISC-YC, ISC-C, ISC-M and ISC- HF"

Rs.8850/- Excluding Tensile Strain Hardening component View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.0 (CARBON)	-
7.0 (SULPHUR)	-
7.0 (PHOSPHORUS)	-
7.0 (MANGANESE)	-
7.0 (SILICON)	-
7.0 (NITROGEN)	-
Cl. 8.1 & Table 5A, 5B & 5C (Yield Stress)	-
Cl. 8.1 & Table 5A, 5B & 5C (Elongation at 50 mm gauge length)	-
Cl. 8.1 & Table 5A, 5B & 5C (Elongation at 80 mm gauge length)	-
Cl. 8.2 (Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm))	-
Cl. 8.3 Table 6 (Hardness Test ( Only for CR0 & CR1))	-
Cl. 8.4 (Bend Test)	-
Cl. 11 (Thickness)	-
Cl. 11 (Width)	-
Cl 10 (Workmanship)	-
Cl 11 (Thickness (08))	-
CL 11.0 (Width (04))	-
7.0 (ALUMINIUM)	-
7.0 (MICRO ALLOYS)	-
Cl 7.1 table 3 (Chromium)	-
Cl 7.1 table 3 (Nickel)	-
Cl 7.1 table 3 (Calcium)	-
Cl 7.1 table 3 (Niobium)	-
Cl 7.1 table 3 (Vanadium)	-
Cl 7.1 table 3 (Titanium)	-
Cl 7.1 table 3 (Boron)	-
Cl 7.1 table 3 (Molybdenum)	-

-
Mech- Except Cl 8.5, 8.6,8.7, 9.5 & table 8 (Plastic Strain Ratio,TS Hardening Comp, Bk Hrdn.

13793

BIS, Eastern Regional Laboratory (ERL)

None

IS 17216 (2019)

Polyethylene Mulch Films for Agriculture and Horticulture • Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.1 (Density)	-
5.1.2 (Melt Flow Index)	-
5.2.1 (Visual Appearance)	-
5.2.2 (Film Form)	-
5.2.4 (Odour)	-
5.3.1.1 (Tolerance on thickness)	-
5.3.1.2 (Tolerance on width)	-
5.3.2, Table 1 (Nominal Film Thickness)	-
5.3.1.2 (Tolerance on width)	-
5.3.2, Table 1 (Nominal Film Thickness)	-
5.3.3 (Tensile Strength at Break)	-
5.3.4 (Elongation at Break)	-
5.3.5 (Coefficient of Friction)	-

-
Except Impact strength

13794

BIS, Eastern Regional Laboratory (ERL)

None

IS/ISO 15761 (2002)

Steel gate, globe and check valves for sizes DN 100 and smaller, for petroleum and natural gas industries

Rs.4990 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.2 (Flow Passage way)	-
5.3.1 (Wall Thickness)	-
5.3.2 (Wall Thickness)	-
5.3.3 (Wall Thickness)	-
5.4.2.1, Table4 (Socket Welding Ends, Diameter)	-
5.4.2.1, Table4 (Socket Welding Ends, Depth)	-
5.4.2.2, Table5 (Socket wall thickness)	-
5.4.2.3 (End to end dimension)	-
5.4.4.1 (Flange ends)	-
5.4.4.2 (Flange ends)	-
5.4.4.3,TABLE 6 (Flange ends)	-
5.4.5.1,Fig 1,Table 7 (Butt Welding Ends ,A)	-
5.4.5.1,Fig 1,Table 7 (Butt Welding Ends ,B)	-
5.4.5.1,Fig 1,Table 7 (Butt Welding Ends ,T)	-
5.4.5.2 (End to end dimension)	-
5.4.6.1 (Body Seat)	-
5.4.6.2 (Body Seat)	-
5.4.6.3 (Body Seat inside dia.)	-
5.7.1 (Stem)	-
5.7.2 (Stem)	-
5.8.1 (Stem nut or stem bushing)	-
5.9.1,Table 10 (Uncompressed packing height , hp)	-
5.9.2 (Surface Finish)	-
5.9.3 (Gland)	-
5.9.4 (Packing)	-
5.10.1 (Packing Retension)	-
5.10.2 (Packing Retension)	-
5.10.3 (Packing Retension)	-
5.10.4 (Packing Retension)	-
5.11.1 (Hand Wheel)	-
5.11.2 (Hand Wheel)	-
5.11.3 (Hand Wheel)	-

-
Except 8.1 Pressure tests, 8.1.6 Fugitive emission testing (type test)

13795

BIS, Southern Regional Laboratory (SRL)

None

IS 5950 (1984)

Specification for shot firing cables (For Use Other Than In Shafts) (First Revision)

11030 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Conductor : Material -IS : 8130-2013)	-
4.1 (Insulation : Material -IS : 5831-1984)	-
5.1 (Sheath : materail IS : 5831-1984)	-
6.1 (Conductor : Construction IS : 8130-2013)	-
7.1 (Insulation : Application )	-
7.2 (Thickness of Insulation - average )	-
7.2 (Thickness of Insulation - Min. )	-
7.3 (Colour of Insulation)	-
8.1, 9.1 (c) (Nominal radial thickness of sheath)	-
8.2 (Thickness of Sheath)	-
8.2 (Thickness of Sheath - min.)	-
8.3 (Colour of Sheath)	-
9.1 a) (Annealing test)	-
9.1 b) (Conductor resistance test)	-
9.1 d) i) (Insulation : Tensile strength)	-
9.1 d) i) (Insulation : elongation at break)	-
9.1 d) i) (Sheath : Tensile strength)	-
9.1 d) i) (Sheath : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength)	-
9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength Variation)	-
9.1 d) ii) (Ageing in air oven - Insulation : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Insulation : elongation variation at break)	-
9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength)	-
9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength variation )	-
9.1 d) ii) (Ageing in air oven - Sheath : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Sheath : elongation variation at break)	-
9.1 d) iii ) (Loss of mass test - insulation )	-
9.1 d) iii ) (Loss of mass test - Sheath )	-
9.1 d) iv ) (Hot deformation - insulation )	-
9.1 d) iv ) (Hot deformation - sheath )	-
9.1 d) v ) (Heat shock - insulation )	-
9.1 d) v ) (Heat shock - Sheath )	-
9.1 d) vi ) (Shrinkage - insulation )	-
9.1 d) vi ) (Shrinkage : Crack observed - insulation )	-
9.1 d) vi ) (Shrinkage - Sheath )	-
9.1 d) vi ) (Shrinkage: Crack observed - Sheath )	-
10.2 (Voltage test )	-
9.1 f) (Insulation resistance test: Volume resistivity )	-
9.1 f) (Insulation resistance test : IR constant)	-
10.4 (Flammability Test )	-
11.1 (Manufacturer’s Identification)	-
11.2 (Cable Code)	-
12.2 (Marking )	-
12.2.1 (Standard marks )	-

-
25 m Excluding except chemical tests

13796

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

31025 View breakup
For Elastomeric Sealing Ring Socket Pipe : Rs. 26,825/- , For BIS Samples Rs. 20,244/-; For Plain Ended/Socket Ended Pipes : Rs. 20,975, For BIS Samples Rs. 15,856/-; For Plumbing Pipes : Rs. 9,975, For BIS Samples Rs. 7,606/-; For PVC Resin : Rs. 4,100/- , For BIS Samples Rs. 3,075/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	300	-
10.1(Surface Finish)	-	300	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	250	-
10.7(Sulphated Ash Content)	-	950	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	250	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	250	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	250	-
9.1(PIPE ENDS)	-	300	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1000	700+300
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	11000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	-
11.2(Resistance to External Blows at 0°C)	-	1400	1100+300
10.3(Effect on Water Test)	-	3000	-
6.1.2(PVC Resin)	-	4100	3000+1100

31 Dec, 2029

-
REVISED VERSION OF IS 4985:2021 INCLUDED W.E.F. 14-10-2021. Size upto 400mm.

13797

BIS, Eastern Regional Laboratory (ERL)

None

IS 1422 (1983)

Specification for cotton duck (third revision)

Hence complete testing charges for the product are Rs.3 View breakup
Hence complete testing charges for the product are Rs.3900.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.2, Table 2, Sr. No. 1 (Scouring loss, Scoured or Dyed)	-
Cl 4.2, Table 2, Sr. No. 1 (Scouring loss, Grey)	-
Cl 4.2, Table 2, Sr. No. 2 (pH value )	-

-
Except Color fastness to light. 05 Pieces (Full width x 3 metres)

13798

Matrix Test Labs

8138626

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	10000		10% discount to BIS
5.2(Message Readability)	-	15000		10% discount to BIS

31 Dec, 2029

-
-

13799

BIS, Eastern Regional Laboratory (ERL)

None

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

Rs.2144/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.2(a)-5.2 (Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-
4.2.2(b)-5.2 (Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-
4.2.3-5.3 (Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-
4.2.3-5.3 (Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy- maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-
4.2.4-5.3 (Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-
4.2.4-5.3 (Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-
4.2.5-5.4 (Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-
4.2.5-5.4 (Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-
4.3-5.4 (Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-
4.3-5.4 (Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-
4.3 (Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-
4.4-5.4 (Toys intended to be entered by a child-rate of spread of flame)	-
4.5-5.5 (Soft-filled toys-rate of spread of flame )	-
4.5-5.5 (Soft-filled toys-Test for soft-filled toys )	-
4.1 (General)	-

-
Complete

13800

BIS, Eastern Regional Laboratory (ERL)

None

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

16,189 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 - 5.24.2 ( Reasonably foreseeable abuse -Drop Test)	-
4.2 - 5.24.6.2 ( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-
4.2 - 5.24.6.3 ( Reasonably foreseeable abuse -Tension test for pompoms)	-
4.2 - 5.24.6.4 ( Reasonably foreseeable abuse -Tension test for protective components)	-
4.2 - 5.24.6.5 ( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-
4.2 - 5.24.7 ( Reasonably foreseeable abuse -Compression test)	-
4.3.2 - 5.21 ( Expanding materials)	-
4.4.1 - 5.2 (Small parts-For children under 36 months)	-
4.4.2 - 5.2 (Small parts-For children 36 months and over but under 72 months )	-
4.5.1.2 - 5.3 (Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-
4.5.1.3 - 5.3 (Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-
4.5.1.4 - 5.3 (Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-
4.5.2 - 5.4 (Shape, size and strength of certain toys-Small balls-Small balls test)	-
4.5.3 - 5.5 (Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-
4.7.1 - 5.9 (Points-Accessible sharp points-sharp-point test)	-
4.9 - c - 5.9 ( Metal wires and rods-Sharp Point test)	-
4.11.2.1(a) - 5.11.2 ( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-
4.11.3.1(a) - 5.11.2 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-
4.11.3.2 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords)	-
4.11.7 - 5.11.1 (Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-
4.11.8 - 5.11.5 (Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-
4.16.2.2(a) - 5.13.2.1 (Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-
4.16.2.2(a) - 5.13.2.2 (Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-
4.13.3 (Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-
4.16.2.2(a) - 5.13.2.2 (Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support After durability test for toy chest lids)	-
4.16.2.2(c) - 5.13.2.2 - 4.12.1(a - 1) (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.16.2.2(c) - 5.13.2.2 - 4.12.2 (a) - 5.22.3 (Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Other toys with folding mechanisms)	-
4.16.2.2(d) (Enclosures-Closures-Lid support for toy chests and similar toys)	-
4.11.5 - 5.11.2 (Cords-Cords on pull toys-free length)	-
4.18.3(b) - 5.15.1.3.3 (Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-
4.18.3(d) - 5.15.2 (Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-
4.18.3(b) - 5.15.1.3.3 (Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-
4.18.4.1 - 5.20 (Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-
4.18.4.3 - 5.15.1.3.3 (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)-kinetic energy per area)	-
4.18.4.3(a) (Projectile toys-Projectile toys without stored energy-Arrows (e.g. bow and arrow set)	-
4.24(a) - 5.18 (Toys containing a heat source-determination of temperature increases)	-
4.25 - 5.19 (Liquid-filled toys-leakage of liquid-filled toys)	-
4.25 (Liquid-filled toys)	-
4.2 - 5.24.2 ( Reasonably foreseeable abuse -Drop Test)	-
4.2 - 5.24.6.2 ( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-
4.2 - 5.24.6.3 ( Reasonably foreseeable abuse -Tension test for pompoms)	-
4.2 - 5.24.6.4 ( Reasonably foreseeable abuse -Tension test for protective components)	-
4.2 - 5.24.6.5 ( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-
4.2 - 5.24.7 ( Reasonably foreseeable abuse -Compression test)	-
4.2 - 5.24.8.2 ( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-
4.2 - 5.24.8.3 ( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-
4.7.3 (Wooden toys)	-
4.2 - 5.24.6.1 ((Reasonably foreseeable abuse-General Procedure ))	-
4.2 - 5.24.5 ( Reasonably foreseeable abuse -Torque test)	-
4.15.1.3 - 5.12.4 ( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-
4.2 - 5.24.3 ( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-
4.2 - 5.24.5 ( Reasonably foreseeable abuse -Torque test)	-
4.3.1 (Material quality)	-
4.5.4 - 5.6 (Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-
4.5.5 (Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-
4.5.6 (Shape, size and strength of certain toys-Balloons)	-
4.5.7 (Shape, size and strength of certain toys-Marbles)	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-
4.13.5 (Holes, clearances and accessibility of mechanisms-Winding keys)	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-
4.2 - 5.24.6.4 ( Reasonably foreseeable abuse -Tension test for protective components)	-
4.5.8 - a (Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-
4.5.8 - b (Shape, size and strength of certain toys-Hemispheric-shaped toys-Extension of divider)	-
4.5.8 - c (Shape, size and strength of certain toys-Hemispheric-shaped toys-Position of opening )	-
4.5.8 - d (Shape, size and strength of certain toys-Hemispheric-shaped toys)	-
4.8.1 (Projections-General requirments)	-
4.9(a) - 5.24.8.2 ( Metal wires and rods-wires and other metallic components intended to be bent)	-
4.9 - c ( Metal wires and rods-Spokes ends)	-
4.10(a) - 5.10 (Plastic film or plastic bags in packaging and in toys-average thickness)	-
4.11.5 - 5.11.2 (Cords-Cords on pull toys-free length)	-
4.12.1(a - 1) (Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-
4.12.3 (Folding mechanisms-Hinge line clearance)	-
4.13.4 (Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-
4.13.5 (Holes, clearances and accessibility of mechanisms-Winding keys)	-
4.14(a) (Springs)	-
4.16.1 (Enclosures-Ventilation)	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-
9873 (Part - 3) 4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9)	-
9873 (Part - 3) 4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 )	-
9873 (Part - 3) 4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9)	-

-
Except 5.25 Accoustic test Material declaration required for phthalate test

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number