BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15617 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

13801

BIS, Eastern Regional Laboratory (ERL)

None

IS 7904 (2018)

High carbon steel wire rods - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table-1,(Clauses 5.1 and 7.2) (Carbon)	-
Table-1,(Clauses 5.1 and 7.2) (Sulphor)	-
Table-1,(Clauses 5.1 and 7.2) (Phosphorous)	-
Table-1,(Clauses 5.1 and 7.2) (Manganese)	-
Table-1,(Clauses 5.1 and 7.2) (Silicon)	-
Table-1,(Clauses 5.1 and 7.2) (Chromium)	-
Table-1,(Clauses 5.1 and 7.2) (Nickel)	-
Table-1,(Clauses 5.1 and 7.2) (Molybdenum)	-
Table-1,(Clauses 5.1 and 7.2) (Copper)	-
Table-1,(Clauses 5.1 and 7.2) (Nitrogen)	-
Table-1,(Clauses 5.1 and 7.2) (S+P)	-
Cl 9 (Dimensions & tolerances) ()	-
Table-1,(Clauses 5.1 and 7.2) (Aluminium)	-
10 (Mechanical Properties (Tensile strength))	-
10 (Mechanical Properties (Reduction in Area))	-
12 (Surface Defects)	-
13 (Decarburization Test)	-
14 (Non-metallic Inclusions (Type A (Sulphide Type) (Thin, worse))	-
14 (Type B (Alumina Type) (Thin, worse))	-
Table-1,(Clauses 5.1 and 7.2) (Boron)	-
TABLE 1 NOTE 1 (Niobium)	-
Table-1,(Clauses 5.1 and 7.2) (Titanium)	-
Table-1,(Clauses 5.1 and 7.2) (Vanadium)	-
TABLE 1 NOTE 1 (Micro Alloy Element (Nb+V+Ti))	-
Table-1,(Clauses 5.1 and 7.2) (Nitrogen)	-

-
Chem- Diameter of the wire /rode should b greater than 3 mm

13802

BIS, Eastern Regional Laboratory (ERL)

None

IS 1239 : Part 1 (2004)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

For all nominal bore and class

Rs. 9200/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.2 AND AS PER IS 513 (CARBON)	-
6.2 AND AS PER IS 10748 (SULPHUR)	-
6.2 AND AS PER IS 10748 (PHOSPHORUS)	-
6.2 AND AS PER IS 10748 (MANGANESE)	-
Cl 8 (Outer Diameter, Thickness & Mass)	-
Cl 14 (Tensile Test, Flattening Test & Bend Test)	-
Cl 15 (Workmanship)	-
6.2 AND AS PER IS 513 (SILICON)	-
6.2 AND AS PER IS 513 (NITROGEN)	-
6.2 AND AS PER IS 513 (MICRO ALLOY)	-
6.2 AND AS PER IS 513 (ALUMINIUM)	-
6.2 AND AS PER IS 10748 (COPPER)	-
6.2 AND AS PER IS 10748 (CARBON EQUIVALENT)	-

-
Facility not available for B,Nb,V,Ti,Ca, Hydrostatic test and thread gauges Sample required- 1m x1 No + 1.8 m pc for bend test up to 50 mm NB + 50 g drilling + 4 pcsx10 cm

13803

BIS, Eastern Regional Laboratory (ERL)

None

IS 8931 (1993)

copper alloy fancy single taps, combination tap assembly and stop valves for water services

Rs 3600/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4 (NOMINAL SIZES)	-
Cl 6.7 (Waterway)	-
Cl 6.9 (Body Seat)	-
Cl 6.10 (Bonnet assembly)	-
Cl 6.11 (Gland Packaging)	-
Cl 6.12 (Flanges)	-
Cl 6.13 (Knob)	-
Cl 7.1 (Thickness)	-
Cl 7.2 (Body)	-
Cl 7.3 (Bonnet Assembly)	-
Cl 7.3.3 (Washer Plate)	-
Cl 7.3 (Bonnet Assembly)	-
Cl 8 (Finish)	-

-
Except critical dimension and performance requirement

13804

BIS, Eastern Regional Laboratory (ERL)

None

IS 733 (2025)

Wrought Aluminium and Aluminium Alloy Bars, Rods, Sections, Extruded Tube, Hollow Sections and Profiles for General Engineering Purposes ? Specification (Fourth Revision)

For all grades/designations except for the tests mentioned in remarks

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4 (General requirements)	-
Cl-6.1, Table-1 to 8 (Cu)	-
Cl-6.1, Table-1 to 8 (Mg)	-
Cl-6.1, Table-1 to 8 (Si)	-
Cl-6.1, Table-1 to 8 (Fe)	-
Cl-6.1, Table-1 to 8 (Zn)	-
Cl-6.1, Table-1 to 8 (Cr)	-
Cl-4 (General requirements)	-
Cl-6.1, Table-1 to 8 (Ti)	-
Cl-6.1, Table-1 to 8 (V)	-
Cl-6.1, Table-1 to 8 (Aluminium)	-
Cl-6.1, Table-1 to 8 (Mn)	-
Cl-7.1, 7.2 & 7.3, Table-9 (Dimensions)	-
Cl-7.1, 7.2 & 7.3, Table-9 (Rm MPa)	-
Cl-7.1, 7.2 & 7.3, Table-9 (Rp0.2 MPa)	-
Cl-7.1, 7.2 & 7.3, Table-9 (Elongation , Percent)	-
Cl-5 (Freedom from Defects)	-

-
CHEM: COMPLETE (SUBJECT TO THE DECLARATION FOR "OTHER" ELEMENTS REFERRED IN Note 1 of Table 1, Cl 6.1)

13805

Central Power Research Institute (CPRI), Bangalore

6101024

IS 16227 : Part 2 (2016)

Instrument transformers: Part 2 additional requirements for current transformers

250000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.2(Temperature-rise test)	-	55250	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
7.2.6.201(Test for ratio error and phase displacement of measuring current transformers)	-	850	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
7.2.6.202(Determination of the instrument security factor (F S) of measuring current transformers)	-	850	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
7.2.6.203(Test for composite error of class P and PR protective current transformers)	-	850	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
7.2.6.204(Test for error at limiting conditions for class TPX, TPY and TPZ protective current transformers)	-	850	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
7.2.6.205(Test of low-leakage reactance type for class PX and PXR protective current transformers)	-	850	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
7.2.6.206(Determination of the remanence factor class PR, TPY, and PXR protective current transformers)	-	850	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
7.2.201(Short-time current tests)	-	48500	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
7.2.3(Impulse voltage withstand test on primary terminals)	-	17050	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
7.2.5(Electromagnetic Compatibility tests)	-	6100	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice

31 Dec, 2029

-
-

13806

BIS, Eastern Regional Laboratory (ERL)

None

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1 Table 1 (Cu)	-
8.1 Table 1 (Pb)	-
8.1 Table 1 (Fe)	-
8.1 Table 1 (Zn)	-
10.1 (Mercurous Nitrate Test)	-
7.0 (Dimension and Tolerances)	-
9.1 Table-2 (Tensile Strength)	-
9.1 Table-2 (Elongation)	-
9.2 (Vickers Hardness)	-

-
Excluding Cl.4.3.1 S, C(<0.05%), Mo(>1.5%)

13807

Central Power Research Institute (CPRI), Bangalore

6101024

IS/IEC 60898 : PART 1 (2015)

Electrical accessories - Circuit - Breakers for overcurrent protection for household and similar installations: Part 1 circuit - Breakers for a.c. operation (First Revision)

1022650 View breakup
Test charges for all sequences combined Rs. 750620/-, Rs. 886600/-, Rs. 1076710/-, Rs. 1176070/- for 1, 2, 3, 4 poles respectively; Test Sequence (A1+ A2): Test sequence A1 Rs. 14260/-, Rs. 17200/-, Rs. 20140/-, Rs. 23080/- for 1, 2, 3, 4 poles respectively; for A2 Rs. 5980/-; Test Sequence B: Rs. 253820/-, Rs. 273830/-, Rs. 296930/-, Rs. 334730/- for 1, 2, 3, 4 poles respectively; Test Sequence C Test Sequence C1 : Rs. 161130/-, Rs. 172680/-, Rs. 237210/-, Rs. 251850/- for 1, 2, 3, 4 poles respectively; Test Sequence C2 : Rs. 63480/-, Rs. 72300/-, Rs. 124890/-, Rs. 133710/- for 1, 2, 3, 4 poles respectively; Test Sequence D (D0 + D1): Test sequence D0 Rs. 61540/-, Rs. 61540/-, Rs. 61540/-, Rs. 61540/- for 1, 2, 3, 4 poles respectively; Test sequence D1 Rs. 63480/-, Rs. 79200/-, Rs. 84030/-, Rs. 92820/- for 1, 2, 3, 4 poles respectively; Test Sequence E Test Sequence E1: Rs. 63480/-, Rs. 72300/-, Rs. 84030/-, Rs. 92820 for 1, 2, 3, 4 poles respectively; Test Sequence E2: Rs. 63480/-, Rs. 79200/-, Rs. 84030/-, Rs. 92820/- for 1, 2, 3, 4 poles respectively; Test Sequence E3: Rs. 63480/-, Rs. 79200/-, Rs. 84030/-, Rs. 92820/- for 1, 2, 3, 4 poles respectively; Test charges will vary depending on the rating of the sample. The applicable test charges will be intimated through a proforma invoice.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking and other product information, IS 60898-1)	-	850	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
8.1.1(General, IS 60898-1)	-	850	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
8.1.2(Mechanism, IS 60898-1)	-	3400	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.3(Test of indelibility of marking, IS 60898-1)	-	850	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
8.1.3(Clearances and creepage distances, IS 60898-1)	-	1450	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
8.1.6(Non-interchangeability)	-	850	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.4(Test of reliability of screws, current-carrying parts and connections, IS 60898-1)	-	3400	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.5.1(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	3400	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.5.2(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	3400	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.5.3(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	3400	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.5.4(Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-	3400	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.6(Test of protection against electric shock, IS 60898-1)	-	1000	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.14.1(Test of resistance to heat, IS 60898-1)	-	1700	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.14.2(Test of resistance to heat, IS 60898-1)	-	1700	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.14.3(Test of resistance to heat, IS 60898-1)	-	1700	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.16(Test of resistance to rusting)	-	1700	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.15(Resistance to abnormal heat and to fire)	-	5200	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.7.5.4(Test of protection against electric shock, IS 60898-1)	-	18000	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.7.1(Test of protection against electric shock, IS 60898-1)	-	4000	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.7.2(Test of protection against electric shock, IS 60898-1)	-	25500	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.7.3(Test of protection against electric shock, IS 60898-1)	-	25500	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.7.4(Test of protection against electric shock, IS 60898-1)	-	7650	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.7.5.2(Test of protection against electric shock, IS 60898-1)	-	24000	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.8(Test of temperature-rise and measurement of power loss, IS 60898-1)	-	35700	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.9(28- day test, IS 60898-1)	-	150700	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.11(Verification of mechanical and electrical endurance, IS 60898-1)	-	102750	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.12(Short- Circuit tests, IS 60898-1)	-	71100	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.12.12(Verification of the circuit-breaker after short-circuit tests)	-	45150	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.12.11.2.2(Short-circuit test for verifying the suitability of circuit-breakers for use in IT systems)	-	71100	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.10.2(Test of tripping characteristic, IS 60898-1)	-	53500	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.10.3(Test of tripping characteristic, IS 60898-1)	-	53500	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.10.4(Test of tripping characteristic, IS 60898-1)	-	53500	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.10.5(Test of tripping characteristic, IS 60898-1)	-	53500	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice
9.13(Resistance to mechanical shock and impact)	-	9600	Test Charges will vary depending on the No of poles, Rating and Marking of the Sample Test charge applicable will be intimated through a proforma invoice

31 Dec, 2029

-
-

13808

BIS, Southern Regional Laboratory (SRL)

None

IS 318 (1981)

Specification for leaded tin bronze ingots and castings (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Freedom from defects-Ingots)	-
6.2 (Freedom from defects-Castings)	-
7.1 (Mass)	-
7.2 (Dimension)	-

-
3 bars Excluding except chemical tests , tensile test

13809

BIS, Southern Regional Laboratory (SRL)

None

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6.1, Table-1 (Si)	-
Cl-6.1, Table-1 (Fe)	-
Cl-6.1, Table-1 (Cu)	-
Cl-6.1, Table-1 (Mn)	-
Cl-6.1, Table-1 (Mg)	-
Cl-6.1, Table-1 (Cr)	-
Cl-6.1, Table-1 (Ni)	-
Cl-6.1, Table-1 (Zn)	-
Cl-6.1, Table-1 (Pb)	-
Cl-6.1, Table-1 (Sn)	-
Cl-6.1, Table-1 (Ti)	-
Cl-6.1, Table-1 (Others elements Each)	-
Cl-6.1, Table-1 (Others elements Total)	-
Cl-6.1, Table-1 (Aluminium)	-
Cl-6.2 (The chemical analysis)	-
Cl-8 (Freedom from Defects)	-

-
" 300 mm long x 2 Nos. For Chemical test:5 pcs of 50 mm X 50 mm. Except Hardness test Facility for preparation of test specimen not available".

13810

BIS, Eastern Regional Laboratory (ERL)

None

IS 4432 (1988)

Specification for case hardening steels (First Revision)

For all grades except test mentioned in remarks

Please see remarks. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Freedom from Defects)	-
7 (Hardness)	-
11 (Dimensional Tolerances)	-
TABLE-1 (Clause-5) ( CARBON)	-
TABLE-1 (Clause-5) (SULPHUR)	-
TABLE-1 (Clause-5) (PHOSPHURS)	-
TABLE-1 (Clause-5) (MANGANESE)	-
TABLE-1 (Clause-5) (SILICON)	-
TABLE-1 (Clause-5) (Chromium)	-
TABLE-1 (Clause-5) (Nickel)	-
TABLE-1 (Clause-5) (Molybdenum)	-
8 (Mechanical testing)	-
8.4 (Impact testing)	-
9 (Grain Size)	-
10 (Inclusion rating)	-
Cl. 5 (Vanadium)	-
Cl. 5 (Copper)	-

-
Chem- Except Vanadium

13811

BIS, Western Regional Laboratory (WRL)

None

IS 15644 (2006)

Safety of electric toys

7050.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.0 (Marking and instructions)	-
8.0 (Power Input)	-
7.0 (Marking and instructions)	-
11.1 (Moisture resistance)	-
11.2 (Resistant to humidity)	-
12.0 (Electric strength at room temperature)	-
13.0 (Mechanical strength)	-
14.1 (Construction)	-
14.2 (Construction)	-
14.3 (Construction)	-
14.4 (Construction)	-
14.5 (Construction)	-
14.6 (Construction)	-
14.7 (Construction)	-
14.8 (Construction)	-
14.9 (Construction)	-
14.1 (Construction)	-
14.11 (Construction)	-
14.12 (Construction)	-
14.13 (Construction)	-
14.14 (Construction)	-
10.0 (Electrical strength at operating temperature)	-
15.1 (Protection of cords and wires)	-
7.0 (Marking and instructions)	-
16.0 (Components)	-
17 Table-1 (Screws and connections)	-
17 Table-1 (Nominal daimeter of screws made of insulating material)	-
18.0 (Clearance and creepage distance)	-
19.1 (Ball pressure test IEC 60695-10-2)	-
19.2.1 (Glow wire test IEC 60695-2-11)	-
7.0 (Marking and instructions)	-
13.0 (Mechanical strength)	-
7.0 (Marking and instructions)	-

-
The following test facilities for clauses are not available: 1. Component (Clause 16) 2. Clause 14.15 3. Clause 20

13812

BIS, Western Regional Laboratory (WRL)

None

IS 5950 (1984)

Specification for shot firing cables (For Use Other Than In Shafts) (First Revision)

Rs 11030/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Conductor : Material -IS : 8130-2013)	-
4.1 (Insulation : Material -IS : 5831-1984)	-
5.1 (Sheath : materail IS : 5831-1984)	-
6.1 (Conductor : Construction IS : 8130-2013)	-
7.1 (Insulation : Application )	-
7.2 (Thickness of Insulation - average )	-
7.2 (Thickness of Insulation - Min. )	-
7.3 (Colour of Insulation)	-
8.1, 9.1 (c) (Nominal radial thickness of sheath)	-
8.2 (Thickness of Sheath)	-
8.3 (Colour of Sheath)	-
9.1 a) (Annealing test)	-
9.1 b) (Conductor resistance test)	-
9.1 d) i) (Insulation : Tensile strength)	-
9.1 d) i) (Insulation : elongation at break)	-
9.1 d) i) (Sheath : Tensile strength)	-
9.1 d) i) (Sheath : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength)	-
9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength Variation)	-
9.1 d) ii) (Ageing in air oven - Insulation : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Insulation : elongation variation at break)	-
9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength)	-
9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength variation )	-
9.1 d) ii) (Ageing in air oven - Sheath : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Sheath : elongation variation at break)	-
9.1 d) iii ) (Loss of mass test - insulation )	-
9.1 d) iii ) (Loss of mass test - Sheath )	-
9.1 d) iv ) (Hot deformation - insulation )	-
9.1 d) iv ) (Hot deformation - sheath )	-
9.1 d) v ) (Heat shock - insulation )	-
9.1 d) v ) (Heat shock - Sheath )	-
9.1 d) vi ) (Shrinkage - insulation )	-
9.1 d) vi ) (Shrinkage : Crack observed - insulation )	-
9.1 d) vi ) (Shrinkage - Sheath )	-
9.1 d) vi ) (Shrinkage: Crack observed - Sheath )	-
10.2 (Voltage test )	-
9.1 f) (Insulation resistance test: Volume resistivity )	-
9.1 f) (Insulation resistance test : IR constant)	-
10.3 (Spark Test)	-
10.4 (Flammability Test )	-
11.1 (Manufacturer’s Identification)	-
11.2 (Cable Code)	-
12.1 (packing )	-
12.2 (Marking )	-
12.2.1 (Standard marks )	-

-
-

13813

BIS, Western Regional Laboratory (WRL)

None

IS 11217 (1984)

Specification for ultramarine blue for use in textile industry

Rs. 600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Composition)	-
2.2 (Identification)	-

-
-

13814

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2.2, Table 2 (Dimension of 11 1/4° bends for Elastomeric sealing ring joint)	-
3.2.2, Table 1 (Dimension of 11 1/4° bends)	-
3.2.3 (Socket, Measurement)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

13815

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 12 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 12 specific requirements for 22½ degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2.2, Table 1 (Dimensions of 22 ½ deg Bends)	-
3.2.2, Table 2 (Dimensions of 22 ½ deg Bend for Elastomeric Sealing Ring Joint)	-
3.2.3 (Socket, measurements)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

13816

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2.2, Table 1 (Dimensions of 30 deg Bends)	-
3.2.2, Table 2 (Dimensions of 30 deg Bend for Elastomeric Sealing Ring Joint)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

13817

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 2 (Manufacture)	-
3.2.2, Fig 1, table 1 (Dimensions)	-
3.2.3 (the socket measurement shall comply with IS 10124 (Part 1).)	-
Table 1 (Clause 3.2.2, and Fig. 1) (Dimensions of 45o Bend)	-
Table 2 (Clause 3.2.2, and Fig. 2) (Dimensions of 45° Bend for Elastomeric Sealing Ring Joint)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

13818

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 9 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 9 specific requirements for 60 degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 2 (Manufacture)	-
3.2.2, Fig 1, table 1 (Dimensions)	-
3.2.3 (the socket measurement shall comply with IS 10124 (Part 1).)	-
Table 1 (Clauses 3.2.2, 3.2.3, and Fig. 1) (Dimensions of 60o Bends)	-
Table 2 (Clause 3.2.2, and Fig. 2) (Dimensions of 60o Bend for Elastomeric Sealing Ring Joint)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

13819

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 8 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 8 specific requirements for 90 degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 2 (Manufacture)	-
3.2.2, Fig 2, table 2 (Dimensions)	-
3.2.3 (the socket measurement shall comply with IS 10124 (Part 1).)	-
Table 1 (Clause 3.2.2, and Fig. 1) (Dimensions of 90o Bends)	-
Table 2 (Clause 3.2.2, and Fig. 2) (Dimensions of 90o Bend for Elastomeric Sealing Ring Joint)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

13820

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 7 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 7 specific requirements for threaded adaptors (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2 (Materials)	-
3.3, 3.3.1, Fig 1 (Manufacture)	-
3.3.2, table 1, fig 1 (Dimensions)	-
3.3.3 (socket measurement shall comply with IS 10124 (Part 1).)	-
Table 1 (Clauses 3.3.1 and 3.3.2) (Dimensions of Threaded Adaptors)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

13821

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 6 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 6 specific requirements for flanged tail pieces with metallic flanges (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 1 (Manufacture)	-
3.2.2, Fig 2, table 2 (Dimensions)	-
Table 1 (Clause 3.2.2, and Fig. 1) (Dimensions of PVC Flanged Tail Piece with Metallic Flanges)	-
Table 2 (Cl.3.2.2, and Fig.1) (Dimensions of Flanged Tail Piece with Metallic Flange for Elastomeric Sealing Ring Joint)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

13822

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 5 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 5 specific requirements for equal tees (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 1 (Manufacture)	-
3.2.2, Fig 1 (Dimensions)	-
Table 1(Cl.3.2.2, and Fig.1) (Dimensions of Equal Tees)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

13823

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 4 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 4 specific requirements for caps (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 1 (Manufacture)	-
3.2.2, Fig 1 (Dimensions)	-
Table 1(Cl.3.2.2, and Fig.1) (Dimensions of Caps)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

13824

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 3 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 3 Specific Requirements for Straight Reducers

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 1 (Manufacture)	-
3.2.2, Fig 1 (Dimensions)	-
Table-1 (cl.3.2.2, Fig 1) (Dimensions of Straight Reducers)	-

-
Test facilities are not available for the following: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

13825

BIS, Western Regional Laboratory (WRL)

None

IS 5158 (1987)

Specification for phthalic anhydride,technical - (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-

-
-

13826

BIS, Western Regional Laboratory (WRL)

None

IS 4199 (2001)

Toilet soap, liquid - Specification (Third Revision)

Rs 2980/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1 (Description)	-

-
Test facility not available for following; 1.SKIN SENSITIZATION TEST ON GUINEA PIGS

13827

BIS, Western Regional Laboratory (WRL)

None

IS 252 (2013)

Caustic soda - Specification (Fourth Revision)

Rs 5100/- (for Lye & Solid) View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Form and Description)	-
Cl. 3.3 and 3.4(Table 1, S. no i) (Sodium carbonate (as Na2CO3), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no ii) (Sodium hydroxide (as NaOH), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no iii) (Chlorides (as Cl– ), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no iv) (Sulphates (as SO4), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no v) (Silicates (as SiO2), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no vi) (Iron (as Fe))	-
Cl. 3.3 and 3.4(Table 1, S. no vii) (Copper)	-
Cl. 3.3 and 3.4(Table 1, S. no viii) (Manganese)	-
Cl. 3.3 and 3.4(Table 1, S. no ix) (Chlorates and per-chlorates)	-
Cl. 3.3 and 3.4(Table 1, S. no x) (Matter insoluble water, percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no xii) (Sodium hydroxide)	-

-
Test facility not available for the following: 1. Mercury

13828

BIS, Western Regional Laboratory (WRL)

None

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

Rs.6600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W') (Tensile Strength)	-

-
Test facilities are not available for the following: 1. Chemical composition as per Cl. 4.2 2.Tensile Test (Proof Stress ) 3.Bend Test

13829

BIS, Northern Regional Laboratory (NRL)

None

IS 2791 (1992)

Soluble coffee powder - Specification (Third Revision)

4126 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.4 Table 1 (Moisture content)	-
3.4 Table 1 (Total ash)	-
3.4 Table 1 (Caffeine content)	-
3.1 (Description )	-
3.4 Table 1 (Solubility in boiling)	-
3.4 Table 1 (Solubility in cold water)	-

-
Caffeine content, Cu

13830

ELECTRONICS AND QUALITY DEVELOPMENT CENTRE - EQDC, GANDHINAGAR

7118234

IS 12615 (2018)

Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification" (Third Revision)

Rotating electrical machines

375000 View breakup
Rs.6,825/- From 0.37 to 5.5kW, Rs.8,550/- From 5.5 to 11kW, Rs.12,488/- From 11 to 19kW, Rs.15,413/- From 19 to 22 kW, Rs.16,463/- From 22 to 29.5kW, Rs.17,963/- From 29.5 to 33kW, Rs.18,788/- From 33 to 45kW, Rs.24,338/- From 45 to 75kW, Rs.33,600/- From 75 to 110kW, Rs.1,50,000/- From 110.1 to 200kW, Rs.1,87,500/- From 200.1 to 250kW, Rs.2,25,000/- From 250.1 to 300kW, Rs.3,00,000/- From 300.1 to 350kW, Rs.3,75,000/- From 350.1 to 375kW

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2.1(Dimensions)	-	18500	From 350.1 to 375 kW
11.0(DUTY AND RATING)	-	6500	From 350.1 to 375 kW
8.0(Earthing)	-	6500	From 350.1 to 375 kW
16.2.3(Full Load Test to Determine Efficiency, Power Factor and Slip)	-	62500	From 350.1 to 375 kW
16.1.6(High Voltage Test)	-	23500	From 350.1 to 375 kW
16.1.1(Insulation Resistance Test)	-	23500	From 350.1 to 375 kW
16.1.4(Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-	57500	From 350.1 to 375 kW
16.2.2(Locked Rotor Test)	-	57500	From 350.1 to 375 kW
16.2.2.1(Locked Rotor Test)	-	57500	From 350.1 to 375 kW
16.2.2.2(Locked Rotor Test)	-	57500	From 350.1 to 375 kW
16.2.2.2.1(Locked Rotor Test)	-	57500	From 350.1 to 375 kW
16.2.2.3(Determination of starting characteristics -locked rotor current)	-	57500	From 350.1 to 375 kW
16.2.2.3.1(Direct proportion method)	-	57500	From 350.1 to 375 kW
Cl. 18.2(Marking and labelling)	-	6500	From 350.1 to 375 kW
15.2(Rating)	-	6500	From 350.1 to 375 kW
15.3.2(Marking)	-	6500	From 350.1 to 375 kW
Cl. 18.1(Marking and labelling)	-	6500	From 350.1 to 375 kW
16.1.2(Measurement of Resistance of Windings of Stator)	-	40000	From 350.1 to 375 kW
16.2.1(Dimensions)	-	18500	From 350.1 to 375 kW
16.2.5(Momentary Overload Test)	-	47500	From 350.1 to 375 kW
16.1.3(No Load Test)	-	40000	From 350.1 to 375 kW
16.1.3(No Load Test)	-	40000	From 350.1 to 375 kW
12.2(Pull up torque)	-	57500	From 350.1 to 375 kW
16.1.5(5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-	40000	From 350.1 to 375 kW
16.2.4(Temperature Rise Test)	-	127500	From 350.1 to 375 kW
16.2.4(Temperature Rise Test)	-	127500	From 350.1 to 375 kW
9.0(Terminal Marking)	-	6500	From 350.1 to 375 kW
6(Method of cooling)	-	127500	From 350.1 to 375 kW
18.3(Marking)	-	6500	From 350.1 to 375 kW
18.3(BIS Certification Marking )	-	6500	From 350.1 to 375 kW

09 Oct, 2027

-
Capacity: 0.37 kW to 375 kW. Exclusions: Optional tests: Test for vibration severity of motor (Cl.16.3.1), Test for noise levels of motor (Cl.16.3.2), Test for degree of protection by enclosure (Cl.16.3.3), Over speed test (Cl.16.3.4), Temperature rise test at limiting values of voltage and frequency variation (Cl.16.3.5).

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number