BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15361 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

1381

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

All Type

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	5000	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	5000	-
Cl. 10.4, Fig 2(Concavity, X1)	-	5000	-
Cl. 10.4, Fig 2(Convexity, X2)	-	5000	-
Cl. 10.5, Fig 3(Squareness of side)	-	5000	-
Cl. 10.6, Fig 4(External Corner Radius)	-	5000	-
Cl. 10.7, Fig 5(Total twist, V)	-	5000	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	5000	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	5000	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	5000	-
Cl. 14.1(Exact Length)	-	5000	-
Cl. 14.1(Random Length)	-	5000	-
Cl. 14.1(Weight on individual length)	-	5000	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	5000	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	5000	-
7(Micro Alloying elements(Nb+V+Ti))	-	5000	-
7(Carbon equivalent as CE)	-	5000	-
10.4(Concavity/Convexity-SOP MT-23)	-	5000	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	5000	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	5000	-
11(Oiling & Painting - IS 4923)	-	5000	-
18.1(Height of the internal weld fin - IS 4923)	-	5000	-
10.3(Thickness - IS 4923)	-	5000	-
13(Marking)	-	5000	-
Cl-19(Mechanical Tests)	-	5000	-
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	5000	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	5000	-
Cl. 10.4, Fig 2(Concavity, X1)	-	5000	-
Cl. 10.4, Fig 2(Convexity, X2)	-	5000	-
Cl. 10.5, Fig 3(Squareness of side)	-	5000	-
Cl. 10.6, Fig 4(External Corner Radius)	-	5000	-
Cl. 10.7, Fig 5(Total twist, V)	-	5000	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	5000	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	5000	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	5000	-
Cl. 14.1(Exact Length)	-	5000	-
Cl. 14.1(Random Length)	-	5000	-
Cl. 14.1(Weight on individual length)	-	5000	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	5000	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	5000	-
7(Micro Alloying elements(Nb+V+Ti))	-	5000	-
7(Carbon equivalent as CE)	-	5000	-
10.4(Concavity/Convexity-SOP MT-23)	-	5000	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	5000	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	5000	-
11(Oiling & Painting - IS 4923)	-	5000	-
18.1(Height of the internal weld fin - IS 4923)	-	5000	-
10.3(Thickness - IS 4923)	-	5000	-
13(Marking)	-	5000	-
Cl-19(Mechanical Tests)	-	5000	-
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	5000	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	5000	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	5000	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	5000	-
Cl. 10.4, Fig 2(Concavity, X1)	-	5000	-
Cl. 10.4, Fig 2(Convexity, X2)	-	5000	-
Cl. 10.5, Fig 3(Squareness of side)	-	5000	-
Cl. 10.6, Fig 4(External Corner Radius)	-	5000	-
Cl. 10.7, Fig 5(Total twist, V)	-	5000	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	5000	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	5000	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	5000	-
Cl. 14.1(Exact Length)	-	5000	-
Cl. 14.1(Random Length)	-	5000	-
Cl. 14.1(Weight on individual length)	-	5000	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	5000	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	5000	-
7(Micro Alloying elements(Nb+V+Ti))	-	5000	-
7(Carbon equivalent as CE)	-	5000	-
10.4(Concavity/Convexity-SOP MT-23)	-	5000	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	5000	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	5000	-
11(Oiling & Painting - IS 4923)	-	5000	-
18.1(Height of the internal weld fin - IS 4923)	-	5000	-
10.3(Thickness - IS 4923)	-	5000	-
13(Marking)	-	5000	-
Cl-19(Mechanical Tests)	-	5000	-
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	-	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	-	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	-	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	-	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	-	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	-	-
Cl. 10.4, Fig 2(Concavity, X1)	-	-	-
Cl. 10.4, Fig 2(Convexity, X2)	-	-	-
Cl. 10.5, Fig 3(Squareness of side)	-	-	-
Cl. 10.6, Fig 4(External Corner Radius)	-	-	-
Cl. 10.7, Fig 5(Total twist, V)	-	-	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	-	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	-	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	-	-
Cl. 14.1(Exact Length)	-	-	-
Cl. 14.1(Random Length)	-	-	-
Cl. 14.1(Weight on individual length)	-	-	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	-	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	-	-
7(Micro Alloying elements(Nb+V+Ti))	-	-	-
7(Carbon equivalent as CE)	-	-	-
10.4(Concavity/Convexity-SOP MT-23)	-	-	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	-	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	-	-
11(Oiling & Painting - IS 4923)	-	-	-
18.1(Height of the internal weld fin - IS 4923)	-	-	-
10.3(Thickness - IS 4923)	-	-	-
13(Marking)	-	-	-
Cl-19(Mechanical Tests)	-	-	-

28 Nov, 2028

-
Included w.e.f 01.04.2026

1382

KSA LABS LLP, Vadodara

7186606

IS 13098 (2024)

AUTOMOTIVE VEHICLES TUBES FOR PNEUMATIC TYRES â SPECIFICATION (second revision)

All

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(Materials)	-	500	-
Cl 3.2(Classification)	-	500	-
Cl 3.2.1(Blend Name)	-	500	-
Cl 3.3(Fit)	-	1500	-
Cl 3.3.1(Thickness Uniformity)	-	2000	-
Cl 4.1.1(Elongation)	-	3000	-
Cl 4.1.2(Strength of Splice)	-	3000	-
Cl 4.1.3(Set After Ageing)	-	2000	-
Cl 4.1.4(Accelerated Ageing)	-	4000	-
Cl 5(AIR TIGHTNESS)	-	2000	-
Cl 6(MARKING)	-	750	-
Cl 3.1(Materials)	-	500	-
Cl 3.2(Classification)	-	500	-
Cl 3.2.1(Blend Name)	-	500	-
Cl 3.3(Fit)	-	1500	-
Cl 3.3.1(Thickness Uniformity)	-	2000	-
Cl 4.1.1(Elongation)	-	3000	-
Cl 4.1.2(Strength of Splice)	-	3000	-
Cl 4.1.3(Set After Ageing)	-	2000	-
Cl 4.1.4(Accelerated Ageing)	-	4000	-
Cl 5(AIR TIGHTNESS)	-	2000	-
Cl 6(MARKING)	-	750	-
Cl 3.1(Materials)	-	500	-
Cl 3.2(Classification)	-	500	-
Cl 3.2.1(Blend Name)	-	500	-
Cl 3.3(Fit)	-	1500	-
Cl 3.3.1(Thickness Uniformity)	-	2000	-
Cl 4.1.1(Elongation)	-	3000	-
Cl 4.1.2(Strength of Splice)	-	3000	-
Cl 4.1.3(Set After Ageing)	-	2000	-
Cl 4.1.4(Accelerated Ageing)	-	4000	-
Cl 5(AIR TIGHTNESS)	-	2000	-
Cl 6(MARKING)	-	750	-

24 Jun, 2028

-
included w.e.f 17.02.2026

1383

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 1077 (1992)

Common burnt clay building bricks - Specification (Fifth Revision)

Class designation 35,30,25,20,17.5,15.0,12.5,10,7.5,5.0,3.5

2400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Common burnt clay bricks)	-	0	-
5(General Quality)	-	0	-
6.1(Dimensions)	-	500	-
6.2(Tolerances)	-	200	-
7.1(Compressive strength)	-	500	-
7.2(Water Absorption)	-	500	-
7.3(Efflorescence)	-	500	-
9(Marking)	-	200	-

26 Aug, 2027

-
Included w.e.f. 24.12.2025

1384

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 15477 (2019)

Adhesives for use with ceramic tiles and mosaics

Type1,2,3,4,5

19400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	19400	-
5.1(Tensile Adhesion Strength )	-	19400	-
5.1(Tensile Adhesion Strength)	-	19400	-
5.2(Shear Adhesion Strength )	-	19400	-
5.2(Shear Adhesion Strength)	-	19400	-
5.2(Shear Adhesion Strength)	-	19400	-
5.3(OpenTime)	-	19400	-
5.4(Adjustment Time)	-	19400	-
5.5(Slip (Required for Vertical Application Only))	-	19400	-
5.6(Deformability (Required for VerticalApplication Only))	-	19400	-
8.2(Marking)	-	19400	-

31 Dec, 2026

-
Included w.e.f. 24.12.2025

1385

Samridhi Test House Pvt. Ltd.

8184706

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

All Grade / Type / Size / Designation

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	100	-
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	100	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5(Marking and Instructions)	-	0	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.14(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.101(Marking and Instructions)	-	0	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	100	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	100	-
Cl.11 & IS:302-1:2008(Heating)	-	100	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11 & IS:302-1:2008(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.11.8(Heating)	-	0	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	100	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	0	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	100	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	300	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	0	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	100	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	0	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	100	-
Cl.18 (Endurance. )	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.101(Abnormal Operation.)	-	0	-
Cl.19.102(Abnormal Operation.)	-	0	-
Cl.19.103(Abnormal Operation.)	-	0	-
Cl.19.104(Abnormal Operation.)	-	0	-
Cl.19.105(Abnormal Operation.)	-	0	-
Cl.19.106(Abnormal Operation.)	-	0	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.107(Abnormal Operation.)	-	0	-
Cl.19.108(Abnormal Operation.)	-	0	-
Cl.19.109(Abnormal Operation.)	-	0	-
Cl.19.110(Abnormal Operation.)	-	0	-
Cl.19.111(Abnormal Operation.)	-	0	-
Cl.19.112(Abnormal Operation.)	-	0	-
Cl.19.113(Abnormal Operation.)	-	0	-
Cl.19.114(Abnormal Operation.)	-	0	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	100	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	100	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	-
Cl.21.101 (Mechanical Strength.)	-	0	-
Cl.21.102(Mechanical Strength.)	-	0	-
Cl.21.103(Mechanical Strength.)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction)	-	200	-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	-
Cl.22.6 of IS 302-1:2008(Construction)	-	0	-
Cl.22.7 of IS 302-1:2008(Construction)	-	0	-
Cl.22.8 of IS 302-1:2008(Construction)	-	0	-
Cl.22.9 of IS 302-1:2008(Construction)	-	0	-
Cl.22.11(Construction)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction)	-	0	-
Cl.22.15 of IS 302-1:2008(Construction)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction)	-	0	-
Cl.22.20 of IS 302-1:2008(Construction)	-	0	-
Cl.22.21 of IS 302-1:2008(Construction)	-	0	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	100	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	0	-
C.23.7 of 302-1:2008(Internal Wiring )	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	100	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
C.24.1.4(Component)	-	0	-
C.24.2 of 302-1:2008(Component)	-	0	-
Cl.24.10(Component)	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	100	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	0	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	0	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	0	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	100	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	100	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	100	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	100	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	200	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	100	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	100	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	0	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	0	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	0	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	0	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	0	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	0	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	0	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	0	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	0	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	0	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	0	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	0	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	0	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	0	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	0	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	0	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	0	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	0	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	0	-
Cl.24 of IS:302-2-30:2007(Component)	-	0	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	0	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	0	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	0	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	0	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	0	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	0	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	0	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	0	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	0	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	0	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	0	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	0	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	0	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	0	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	0	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	0	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	0	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	0	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	0	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	0	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	0	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	0	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	0	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	0	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	0	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	0	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	0	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	0	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	0	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	0	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	0	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Injected currents)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-

-
Included w.e.f 06.01.2026 "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Injected currents)) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)"

1386

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

35200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	0	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	0	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	0	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
6.1(MATERIALS : ARMGURING)	-	0	-
6.2(MATERIALS : ARMGURING)	-	0	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	0	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	0	-
8.1(CONSTRUCTION : CONDUCTOR)	-	0	-
8.2(CONSTRUCTION : CONDUCTOR)	-	0	-
9.1(INSULATION )	-	0	-
9.2(INSULATION : Thickness of Insulation)	-	300	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	0	-
9.4(INSULATION : Application of Insulation)	-	0	-
10.1(CORE IDENTIFICATION)	-	100	-
10.2(CORE IDENTIFICATION)	-	0	-
10.3(CORE IDENTIFICATION)	-	0	-
10.3.1(Arrangement of Marking)	-	100	-
11.1(LAYING UP OF CORES)	-	100	-
11.2(LAYING UP OF CORES)	-	0	-
12.1(INNER SHEATH)	-	0	-
12.2(INNER SHEATH)	-	0	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	300	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	0	-
13.1.1(ARMOURING : Application)	-	0	-
13.1.2(Armouring: Coverage )	-	400	-
13.1.3(ARMOURING : Direction of lay )	-	100	-
13.1.4(ARMOURING : Application)	-	0	-
13.2(ARMOURING : Type of Armour)	-	0	-
13.2.1(ARMOURING : Type of Armour)	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	400	-
13.3(Armouring : Dimensions -Formed wire )	-	400	-
13.4(ARMOURING : Joints)	-	0	-
13.5.1(ARMOURING : Resistance)	-	400	-
13.5.2(ARMOURING : Resistance)	-	0	-
13.6 a)(ARMOURING: Tensile Strength)	-	500	-
13.6 b)(ARMOURING: Elongation )	-	500	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	500	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	500	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	600	-
13.6 g)(ARMOURING: Resistivity)	-	400	-
14.1(OUTER SHEATH)	-	0	-
14.2(OUTER SHEATH)	-	0	-
14.3(OUTER SHEATH : Colour )	-	0	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	300	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	300	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	400	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	400	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	300	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	800	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	0	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	400	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	300	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	400	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	300	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	800	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	0	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	800	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	400	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	400	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 d)4)(Hot deformation : Insulation )	-	600	-
15.1 d)4)(Hot deformation : Sheath )	-	600	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	800	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	800	-
15.1 d)6)(Heat shock test- Insulation )	-	400	-
15.1 d)6)(Heat shock test- sheath )	-	400	-
15.1 d)7)(Thermal stability- insulation )	-	500	-
15.1 d)7)(Thermal stability- Sheath )	-	500	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	500	-
15.1 e)(Insulation resistance test : IR Constant )	-	500	-
15.1 f)(High voltage test ( water immersion test ))	-	800	-
15.1 g)(High voltage test at room temperature)	-	500	-
15.1 g)(High voltage test at room temperature)	-	0	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	500	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	500	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	500	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	500	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	500	-
16.1(DETAILS OF TESTS : General)	-	0	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	0	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	0	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	2000	-
16.4(Flammability Test)	-	400	-
16.5(Oxygen Index Test)	-	1000	-
16.6(Flame Retardance Test on Single Cables)	-	500	-
16.7(Flame Retardance Test on Bunched Cables)	-	1500	-
16.9(Test for Halogen Acid Gas Evolution)	-	1000	-
16.1(Temperature Index)	-	1000	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	0	-
17.2(IDENTIFICATION : Cable Identification)	-	0	-
17.2.1(IDENTIFICATION : Cable Identification)	-	0	-
17.3(IDENTIFICATION : Cable Code)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	500	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	500	-
16.4(Flammability Test- Un affected portion)	-	0	-
16.4(Flammability Test- Period of Burning)	-	0	-
9.3(Minimum Thickness of Reduce core insulation)	-	0	-
9.2(Thickness of Reduce core insulation)	-	500	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	0	-
Cl No. 16.10(Smoke density test)	-	800	-
Cl No. 16.8(Test for specific optical density of smoke)	-	0	-
Table 4(Copper purity test)	-	1500	-
Cl.8(Conductor, Number of wires.)	-	200	-
Cl.8(Conductor, Number of wires.)	-	0	-
Cl.8(Flexibility class)	-	0	-
[(Cl.15), (d), 2](After ageing, Elongation of Sheath [Percentage])	-	500	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	500	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	500	For BIS Type test- 35200/- only. For BIS acceptance test- 30000/- only. For BIS routine test - 17000/- only. For others type test- 45500/- only.

-
included w.e.f 05.01.2026

1387

Mbis Tescon Private Limited

8190506

IS 8008 (2022)

Injection Moulded/Machined Polyethylene Fittings for Water Supply ï¿½ Specification ( Second Revision )

All variety upto size 500 mm

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	14000	Fittings :20000, resin:7000,master batch :7000 for bis testing charges and for other 1.5 times of bis testing charges
5(COLOUR)	-	200	-
6.1(The nominal outside diameter)	-	200	-
6.2(Bends, tees, pipe ends and end caps designation)	-	200	-
7(WELD LENGTH)	-	200	-
8(VISUAL APPEARANCE)	-	200	-
9.1(DIMENSIONS OF FITTINGS)	-	2000	-
9.2(DIMENSIONS OF FITTINGS)	-	200	-
9.3(DIMENSIONS OF FITTINGS)	-	500	-
10.1.1(Length of Pipe for Welding Test)	-	10000	-
10.1.2(Sandwich Flange Hydraulic Testing)	-	500	-
10.2(Carbon Black Content and Dispersion)	-	3000	-
10.3(Melt Flow Rate)	-	1500	-
10.4(Density)	-	500	-
10.5(Oxidation Induction Time)	-	2500	-
10.6(Overall Migration)	-	2500	-
11.1(Type Tests)	-	0	-
11.2(Acceptance Tests)	-	0	-
4.2(Material)	-	0	-
4.1(Material)	-	0	-
4.2(Material)	-	0	-
4.3(Rework Material)	-	0	-

11 Nov, 2028

-
Included w.e.f 24.12.2025

1388

CIPET, Hajipur

5118334

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

38725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.1 (Visual and Workmanship Requirement)	-	300	-
6.2, 6.2.1 (Quick Coupled Fittings)	-	6750.0	Density : 1000 (5002) Melt Flow Rate: 2200 (11002) Carbon Black Content: 1850 (9252) Carbon Black Dispersion:1400 (7002) Workmanship & Appearance: 300
6.1.3.2 (Quick coupled fittings)	-	0.0	-
6.1.3.1.1(Weldability Test)	-	6400.0	Acceptance Test: 1600 Quality Test: 4800
6.1.3, 6.1.3.1(Weldability Test)	-	0.0	-
6.1.2.2( Hydraulic Proof Test)	-	850.0	-
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	850.0	-
6.1(Quick Coupled Pipes and Fittings)	-	0.0	-
5.3(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	500.0	-
5.2(Dimensions of Quick Coupled Pump Connectors Table 3.)	-	0.0	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	0.0	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	0.0	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	0.0	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	0.0	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	0.0	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	0.0	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	0.0	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	0.0	-
4.1.5(Rubber Ring)	-	4950.0	Hardness before Ageing: 375.0 Ageing : 4200.0 Hardness after Ageing: 375.0
4.1.4(b)(Holding Attachments for Coupler Parts)	-	0.0	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	0.0	-
4.1 .3(Workmanship and Appearance)	-	300.0	-
4.1 .1.2.2(HDPE couplers)	-	0.0	-
4.1 .1.2.1(HDPE couplers)	-	0.0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700.0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
4.1 (b)(HDPE couplers —)	-	0.0	-
4.1 (a)( Quick Coupled Male and Female Couplers)	-	0.0	-
4(QUICK COUPLED FITTINGS)	-	0.0	-
3(QUICK COUPLED PIPES)	-	17575.0	-
Cl.6.1.3(Weldability Test- b) Acceptance test)	-	1600	-
Cl.6.1.3(Weldability Test- a) Quality test)	-	4800	-
Cl 4.1.5(Rubber rings- C)Rubber ring shall be of black colour:)	-	300.0	-
Cl 4.1.5(Rubber rings- B) Change in hardness)	-	375	-
Cl 4.1.4(Holding attachments for coupler parts)	-	1700.0	850+850
Cl.4.1.3(Workmanship and appearance )	-	300.0	-
Cl.4.1(Quick Coupled Male and Female Couplers)	-	0.0	-

07 Oct, 2028

-
-

1389

CIPET, Hajipur

5118334

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

31869.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	6000.0	Testing Charges - 5500.0 Specimen Charges - 500.0
8.9 table-6(Elongation at Break)	-	1600.0	Testing Charges - 1100.0 Specimen Charges - 500.0
8.8(Tensile Strength for Butt-fusion)	-	1600.0	Testing Charges - 1100.0 Specimen Charges - 500.0
8.7(Density)	-	500.0	Nil
8.5 (Oxidation Induction Time)	-	2200.0	Nil
8.4( Melt Flow Rate)	-	1100.0	Nil
8.2(Longitudinal Reversion Test)	-	900.0	Testing Charges - 700.0 Specimen Charges - 200.0
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600.0	Nil
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400.0	Nil
7.4.1.2(Ovality)	-	0.0	Charges included in Dimension Test
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	500.0	Dimension of Pipe (MOD, Ovality, Thickness, Length)
7.2(Length)	-	0.0	Charges included in Dimension
6.2.1(6.1.1 Identification Stripes)	-	250.0	Nil
6.2(Colour)	-	250.0	Nil
8.6(Overall migration)	-	2000.0	Testing Charges - 1700.0 Specimen Charges - 300.0
8.3(Carbon black)	-	1625.0	CBC - 925 CBD - 700

07 Oct, 2028

-
-

1390

CIPET, Hajipur

5118334

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

7463 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	1050	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.1 (chem)(Workmanship and Finish)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.2 (chem)(Design, Shape & Dimension)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.3(Workmanship, Finish & Appearance)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.4 , clause 5 of IS:2798:1998(Brimful capacity in ml)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	500	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.2(TRANSPARANCY)	-	700	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.3(LEAKAGE TEST)	-	1000	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.4(DROP TEST)	-	1100	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.5(MIGRATION TEST)	-	1700	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.6(PORTABILITY TEST)	-	2900	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.5.1 (chem)(Colour migration (Caps))	-	0	Nil
4.6.5.1 (chem)(Colour migration (Container))	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	0.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	0.0	25% discount of test charges for BIS test assignment on proposed testing charges. Excluding specimen preparation & conditioning charges.

07 Oct, 2028

-
-

1391

CIPET, Hajipur

5118334

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

19380 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Material Identification)	-	1050	-
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	500	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	500	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	1100	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	850	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	900	-
3.2(Unlaminated Fabric Mass )	-	250	-
3.3.1(Bottom seam (IS 10789))	-	250	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	250	-
4.2 and Table 1 ii(Dimensions )	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
4.2 and Table 1 v(Mass of sack )	-	250	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	2200	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	2200	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	-
4.2 and Table 1 x(Ash content )	-	950	-

07 Oct, 2028

-
-

1392

CIPET, Hajipur

5118334

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

19140 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	1050	-
3.2(Tapes – Width )	-	250	-
3.2(Tapes – Linear Density )	-	0.0	-
3.3(Tying Cord)	-	0.0	-
3.4(Sack)	-	0.0	-
3.4.1(Seam)	-	250	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	250	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	250	-
4.1 and Table 1 ii(Ends per dm )	-	250	-
4.1 and Table 1 iii(Picks per dm )	-	250	-
4.2 and Table 1 iv(Mass of sack )	-	300	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1100	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1100	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	1100	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	1100	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	1100	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12540	-
4.1 and Table 1 ix(Ash content )	-	950	-

07 Oct, 2028

-
-

1393

CIPET, Hajipur

5118334

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

19480 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	-
4.1(Raw Material)	-	1050	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	-
4.2(Tapes – Linear Density )	-	500	-
4.2(Construction)	-	0	-
4.3.1(Bottom Seam)	-	250	-
4.3.1( The two rows of stitches shall be separated from each other)	-	250	-
4.3.1( The outer stitch)	-	250	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	250	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	250	-
4.3.1(The number of stitches/dm)	-	250	-
4.3.2(Mouth)	-	250	-
4.4 and Table 1 i(Capacity)	-	250	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
5.1 and Table 1 v(Mass of sack )	-	250	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	1100	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	1100	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12380	-
5.2 and Table 1 x(Ash content )	-	950	-

07 Oct, 2028

-
-

1394

CIPET, Hajipur

5118334

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	300	-
5.1.2(Film Form)	-	300	-
5.1.3(Odour)	-	300	-
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	-
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	-
5.1.6a(Carbon Black Content, Annex-A)	-	925	-
5.1.6b(Ash Content, Annex-A)	-	950	-
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	-
5.2.2(Tolerance on Thickness, Annex-A)	-	250	-
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1100	-
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1100	-
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4200	-
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	1100	-
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	1100	-
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1100	-
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1000	-
6.1, Table 1(Tear resistence. B) Transverse direction )	-	1000	-
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	1100	-
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	1100	-
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4200	-
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	1100	-
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	1100	-
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	1100	-
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
8.1, Table 3(Tear resistance , Annex B)	-	2000	1500+500
8.1, Table 3(Puncture resistance , Annex C)	-	1350	1100+250
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1100	-
9.1, Table 4(Tear resistance , Annex B)	-	2000	1500+500
9.1, Table 4(Puncture resistance , Annex C)	-	1350	1100+250
Clause 9.1 (Table 4)(Break Elongation)	-	1100	-
Clause 9.1 (Table 4)(Yield Elonation)	-	1100	-
Clause 9.1 (Table 4)(Break strength)	-	1100	-
Clause 9.1 (Table 4)(Yield strength)	-	1100	-
Clause 8.1(Table 3)(Break Elongation)	-	1100	-
Clause 8.1(Table 3)(Break strength)	-	1100	-
Clause 7.1(Table 2)(Dart Impact Strength)	-	1100	-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	1100	-
Clause 7.1(Table 2)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	1100	-
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Transverse Direction))	-	1100	-
Clause 6.1(Table 1)(Decrease in Tensile Strength after Ageing(Machine Direction))	-	1100	-
Clause 5.2.3(Tolerance on Width)	-	250	-

07 Oct, 2028

-
-

1395

CIPET, Hajipur

5118334

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

9725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0 5.1 (Table1) (Dimensions a)Outside diameter of pipe)	-	250.0	Dimension All - 250 (OD, Wall Thickness, Tolerance etc)
5.0 5.1 (Table1) (b)Tolerance on OD)	-	250	Dimension All - 250 (OD, Wall Thickness, Tolerance etc)
5.0 5.1 (Table1) (c)Wall thickness of pipe Minimum)	-	250	Dimension All - 250 (OD, Wall Thickness, Tolerance etc)
5.0 5.1 (Table1) (c)Wall thickness of pipe Maximum)	-	250	Dimension All - 250 (OD, Wall Thickness, Tolerance etc)
6.0 (6.1) (Visual appearance)	-	300.0	-
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	3000.0	-
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	1000.0	-
8.0 (8.1) (Supply of pipes )	-	0.0	Charges include in visual Appearance
9.0 (9.1)(Coiling )	-	0.0	Charges include in visual Appearance
9.0 (9.1)(Minimum Internal Diameter of Coil)	-	0.0	Charges include in Dimension
3.1(Class of Pipe)	-	0.0	Charges include in visual Appearance
6.1(Visual Appearance)	-	300.0	-
7.2(Reversion Test)	-	1000	Testing Charges - 700 Specimen Charges - 300 Total Charges - 1000
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0.0	-
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	0.0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200.0	0.0
7.3(Elongation at Break)	-	1350.0	Testing Charges - 1100 Specimen Charges - 250 Total Charges - 1350 Charges include for tensile test
7.3(Tensile Test)	-	0.0	Charges include in Elongation at Break
4.3(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	700	-
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	-
4.1.c.i (Density)	-	1125	Testing Charges - 500 Specimen Charges - 625

07 Oct, 2028

-
-

1396

CIPET, Hajipur

5118334

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

17150.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	925.0	-
4.2.3(Carbon Dispersion Test)	-	700.0	-
5(Types and Features )	-	0.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3050.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.0	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	3050.0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.0	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.0	-
5.3(Types and Features )	-	0.0	-
5.6(Types and Features )	-	0.0	-
6.1(Finish)	-	300.0	-
7.1.1(Resistance to Deformation)	-	700.0	-
7.1.2(Resistance to Deformation)	-	700.0	-
7.2(Resistance to Impact)	-	1100.0	-
7.3(Test for Top Load Resistance)	-	900.0	-
7.4(Tensile Strength)	-	1350.0	1100+250(Specimen Charges)
7.5(Flexural Modulus)	-	1600.0	1100+500 (Specimen Charge)
7.6(overall Migration)	-	2200.0	1700+500 (Specimen Charges)
9.2.1(Man-Hole and Hand-Hole Lids)	-	1050.0	-
9.2(Man-Hole and Hand-Hole Lids)	-	0.0	-
9.1(Man-Hole and Hand-Hole Lids)	-	250.0	-
9.1(Lid Thickness)	-	250.0	-
7.3(Test for Top Load Resistance)	-	900.0	-
6.1(Finish)	-	300.0	-
5.4(Wall Thickness above effective height)	-	250.0	-
5.2 Table 2 (7)(Minimum Wall Thickness)	-	250.0	-
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	500.0	-

07 Oct, 2028

-
-

1397

CIPET, Hajipur

5118334

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

11475 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	300	Including Visual appearance, color Designation)
3(Designation)	-	0.0	Include in Marking
4(Colour)	-	0.0	Include in Marking
6(Dimensions of pipes)	-	250.0	-
7(Visual Appearance)	-	0.0	Include in Marking
8.1(Hydraulic characteristics)	-	6400.0	a) Acceptance Test - 1600 b) Type Test - 4800
8.2(Reversion)	-	700	Testing Charges - 700 Specimen Charges - 300
8.3(Density)	-	500	-
8.4(Melt Flow Rate)	-	1100	-
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	-

07 Oct, 2028

-
-

1398

CIPET, Hajipur

5118334

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

19175 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(CLASSIFICATION OF PIPES)	-	0	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	1125	625 + 500
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
4.3(Anti-oxidant)	-	1100	-
5.1 table -1(DIMENSIONS OF PIPES)	-	500	-
5.1.2(Ovality)	-	0	-
6.1(VISUAL APPEARANCE)	-	300	-
7.1 Table -2(Hydraulic Characteristics)	-	0.0	-
7.2(Reversion Test)	-	1000	700 + 300 (specimen charges)
7.3(Tensile Test)	-	1350	1100 + 250 (specimen charges)
7.4table-2(Fusion Compatibility Test)	-	6400	-
7.5(Density)	-	500	-
7.6(Melt now Rate (MFR))	-	1100	-
(Cl.4.2)(Carbon black- b) Dispersion of carbon black)	-	700	-
(Cl.4.2)(Carbon black- a)carbon content)	-	925	-
Cl.7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	-
Cl.7.4(Fusion Compatibility Test- a) Quality test)	-	4800	-
Cl.7.3(Tensile Test - ii)Elongation at Break)	-	1350	1100 + 250 (specimen charges)
Cl 7.1(Hydraulic Characteristics - Acceptance test)	-	1600	-
Cl 7.1(Hydraulic Characteristics - Quality test)	-	4800	-
Cl.6(Visual Appearance)	-	300	-
Cl.5(Dimensions of pipe - ii) Wall thickness maximum)	-	0	-
Cl.5(Dimensions of pipe - ii) Wall thickness minimum)	-	0	-
Cl.5(Dimensions of pipe - i) Outside diameter)	-	0	-

07 Oct, 2028

-
-

1399

Mbis Tescon Private Limited

8190506

IS 17546 (2021)

Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification

All variety

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Dimensions of fitting)	-	3000	Fittings :85000 & Raw material 20000 for bis testing charges and for others 1.5 times of bis testing charges
8.2(Opacity)	-	1500	-
8.1(Visual Appearance)	-	200	-
8.4(Vicat softening Temperature)	-	2000	-
8.3(Stress Relief Test)	-	2000	-
8.5(Density)	-	500	-
8.6(Effect on water)	-	5000	-
9(Mechanical Properties)	-	0	-
11(Marking)	-	0	-
Cl-6.2.2(Compound Chlorine Content)	-	2000	-
Cl-6.2.5(Verification of the Malfunction Temperature)	-	18000	-
Cl-9.1(Hydrostatic Characteristics)	-	29000	-
Cl-9.2(Thermal Stability by Hydrostatic Pressure Testing)	-	28000	-
6(Composition)	-	20000	-
3.1(Nominal Size(DN))	-	200	-
3.2(Nominal Outside Diameter)	-	200	-
3.3(Mean Inside Diameter of Socket at Entry)	-	200	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	200	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	200	-
3.5(Out-of-Roundness (Ovality))	-	200	-
3.6(Nominal Wall Thickness)	-	200	-
3.7(Minimum Wall Thickness)	-	200	-
3.8(Tolerance)	-	200	-
3.9(Working Pressure)	-	0	-
3.11(Type Tests)	-	60000	-
3.11(Acceptance Tests)	-	50000	-
3.1(Standard Dimension Ratio)	-	200	-

11 Nov, 2028

-
Included w.e.f 24.12.2025

1400

Mbis Tescon Private Limited

8190506

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

All variety upto size 500 mm

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	5000	pipe :16000 & Resin :5000 for bis testing charges and for others 1.5 times of bis testing charges
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	200	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	200	-
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	200	-
6.1.3 (Length of Pipe)	-	200	-
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	200	-
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	200	-
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	200	-
6.1.4, Table 3(iv) Length of spigot, l1)	-	200	-
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	200	-
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	200	-
6.1.4.1 (e3min=0.75e)	-	200	-
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	200	-
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	200	-
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	200	-
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	200	-
7(Physical characteristics )	-	0	-
7.1(Appearance:- )	-	200	-
7.1(Appearance:- )	-	200	-
7.2(Colour )	-	200	-
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1500	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1500	-
8(MECHANICAL CHARACTERISTICS)	-	0	-
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	2000	-
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	2000	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	2000	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	5000	-
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	2000	-
9.2 IS 14182(b) Solvent cement)	-	0	-
10(Performance requirements)	-	0	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	1000	-
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1000	-
'7.5 (amdt.7)(Effect on Water (Type test))	-	5000	-
5.3(Qualitative)	-	0	-
12(Marking)	-	100	-
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	0	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	0	-

11 Nov, 2028

-
Included w.e.f 24.12.2025

1401

Mbis Tescon Private Limited

8190506

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

All Variety

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	200	PIPE :85000, raw materail:20000 for bis testing chrges and for others 1.5 time of bis testing charges
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	200	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	200	-
7.1.3 (Effective length)	-	200	-
8(Pipe Ends)	-	500	-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	200	-
9.1(Visual Appearance)	-	200	-
9.2 IS 12235 (Part 3)(Opacity)	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	1000	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1500	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1500	-
9.6 IS 12235(Part 14)(Density)	-	500	-
10(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	3000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	18000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	8000	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	28000	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	2000	-
10.4 IS 12235(Part 19)(Flattening Test)	-	2000	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	2000	-
5 Table 1(Classification of pipes)	-	0	-
6.2.1 Annex B(Chloride Content of Resin)	-	2000	-
6.3(Compound Properties)	-	20000	-
6.3.1 Annex B(Chloride content)	-	2000	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	18000	-
6.3(K value Test)	-	2000	-
6.3.3(Density)	-	500	-
5 Table 1(Classification of pipes)	-	0	-
6.2.1 Annex B(Chloride Content of Resin)	-	0	-
6.3(Compound Properties)	-	0	-
6.3.1 Annex B(Chloride content)	-	0	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	0	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	-
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	0	-
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	0	-
7.1.3 (Effective length)	-	0	-
8.0(Pipe Ends)	-	0	-
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	-
9.1(Visual Appearance)	-	0	-
9.2 IS 12235 (Part 3)(Opacity)	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	-
9.6 IS 12235(Part 14)(Density)	-	0	-
10.0(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	0	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	0	-
10.4 IS 12235(Part 19)(Flattening Test)	-	0	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0	-
7.1.2(Wall Thickness (Maximum))	-	0	-
7.1.1(Outside Diameter at any point (Maximum))	-	0	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	-

11 Nov, 2028

-
Included w.e.f 24.12.2025

1402

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 7494 (2023)

ALLOYS FOR INTERNAL COMBUSTION ENGINE VALVE APPLICATIONS ï¿½ SPECIFICATION (Second Revision)

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.0(classification.)	-	0	-
Clause. 5.0(manufacture)	-	0	-
Clause. 5.0(Product Designations)	-	0	-
Clause. 7.0(Carbon)	-	500	-
Clause. 7.0(Silicon)	-	500	-
Clause. 7.0(Manganese.)	-	500	-
Clause. 7.0(Phosphorus)	-	500	-
Clause. 7.0(Chromium)	-	500	-
Clause. 7.0(Nickel)	-	500	-
Clause. 7.0(Molybednum)	-	500	-
Clause. 7.0(Vanadium)	-	500	-
Clause. 7.0(Neobium)	-	500	-
Clause. 7.0(Titanium)	-	500	-
Clause. 7.0(Nitrogen)	-	500	-
Clause. 7.0(Tungsten.)	-	500	-
Clause. 7.0(Other)	-	1000	-
Clause. 7.0(Aluminium)	-	500	-
Clause.9.0(Tensile Test)	-	2500	-
Clause.9.0(Proof Stress)	-	2000	-
Clause.9.0(Elongation)	-	1500	-
Clause.9.0(Brinell Hardness)	-	2500	-
Clause.8.0(Freedom from defect)	-	1500	-
Clause.10.0(Grain size)	-	2500	-
Clause.11.0(Non-metallic inclusion.)	-	3500	-
Clause.12.0(Physical propertise)	-	2000	-
Cluase.13.0(Dimensions and tolerances.)	-	2500	-
Clause 14.0(Sampling.)	-	0	-
Clause 14.2(Hardness test.)	-	0	-
Clause 14.3(Tensile Test)	-	0	-
Clause 16.0(Packing and marking.)	-	0	-

08 Feb, 2027

-
Included w.e.f. 23.01.2026

1403

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

All Type

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3000	-
Cl 13(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3000	-
Cl 13(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3000	-
Cl 13(Workmanship)	-	500	-
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	1500	-
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	1500	-
5 AND AS PER IS 10748(COPPER)	-	500	-
5 AND AS PER IS 10748(MICRO ALLOY)	-	500	-
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	500	-
5 AND AS PER IS 10748(CARBON)	-	500	-
Clause - 5.1, Table-3( ALUMINIUM)	-	500	-
Clause - 5.1, Table-3(SILICON)	-	500	-
Clause - 5.1, Table-3(NITROGEN)	-	500	-
Clause - 5.1, Table-3(MANGANESE)	-	500	-
Clause - 5.1, Table-3(PHOSPHURS)	-	500	-
Clause - 5.1, Table-3(SULPHUR)	-	500	-
Clause - 5.1, Table-3( CARBON)	-	500	-
9(Straightness)	-	2000	-
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	2000	-
Cl. 11.2 Table 2(Elongation)	-	1000	-
Cl. 11.2 Table 2(Yield strength)	-	3000	-
Cl. 6 , 6.2 Table 1(Square of radius of gyyration)	-	500	-
Cl. 6 , 6.2 Table 1(Radius of gyration)	-	500	-
Cl. 6 , 6.2 Table 1(Modulus of section)	-	200	-
Cl. 6 , 6.2 Table 1(Moment of inertia)	-	200	-
Cl. 6 , 6.2 Table 1(Surface internal)	-	200	-
Cl. 6 , 6.2 Table 1(Surface external)	-	200	-
Cl. 6 , 6.2 Table 1(Internal volume)	-	500	-
Cl. 6 , 6.2 Table 1(Area of cross section)	-	500	-
Cl. 6 , 6.2 Table 1(Weight)	-	500	-
Cl. 6 , 6.2 Table 1(Thickness)	-	500	-
Clause 11.2, Table -2(Elongation)	-	1000	-
Clause 11.2, Table -2(Yield Strength)	-	3000	-
Cl 13(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3000	-
Cl 9(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	3000	-
Cl 13(Workmanship)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Area of Cross Section - SOP MT-23)	-	500	-
8.0(Mass of Zinc coating - IS:6745)	-	1000	-
8.0(Freedom from defects - IS 4736)	-	1000	-
8.0(Uniformity of galvanized coating - IS 4736)	-	1500	-
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	1500	-
13.0(Oiling and Painting - Visual)	-	100	-
12(Marking)	-	100	-
CL 6("1.Outer dia (04) 2.Thickness (08)")	-	500	-
CL 06(Minimum Outer dia (04))	-	500	-
CL 06(Maximum Outer dia (04))	-	500	-
CL 06(" Minimum Thickness (08)")	-	500	-
CL 06(Maximum Thickness (08))	-	500	-
10(Lengths)	-	500	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
9(Straightness)	-	500	-
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	500	-
Cl. 11.2 Table 2(Elongation)	-	500	-
Cl. 11.2 Table 2(Yield strength)	-	500	-
Cl. 6 , 6.2 Table 1(Square of radius of gyyration)	-	500	-
Cl. 6 , 6.2 Table 1(Radius of gyration)	-	500	-
Cl. 6 , 6.2 Table 1(Modulus of section)	-	500	-
Cl. 6 , 6.2 Table 1(Moment of inertia)	-	500	-
Cl. 6 , 6.2 Table 1(Surface internal)	-	500	-
Cl. 6 , 6.2 Table 1(Surface external)	-	500	-
Cl. 6 , 6.2 Table 1(Internal volume)	-	500	-
Cl. 6 , 6.2 Table 1(Area of cross section)	-	500	-
Cl. 6 , 6.2 Table 1(Weight)	-	500	-
Cl. 6 , 6.2 Table 1(Thickness)	-	500	-
Clause 11.2, Table -2(Elongation)	-	500	-
Clause 11.2, Table -2(Yield Strength)	-	500	-
Cl 13(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Area of Cross Section - SOP MT-23)	-	500	-
8.0(Mass of Zinc coating - IS:6745)	-	500	-
8.0(Freedom from defects - IS 4736)	-	500	-
8.0(Uniformity of galvanized coating - IS 4736)	-	500	-
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	500	-
13.0(Oiling and Painting - Visual)	-	500	-
12(Marking)	-	500	-
CL 6("1.Outer dia (04) 2.Thickness (08)")	-	500	-
CL 06(Minimum Outer dia (04))	-	500	-
CL 06(Maximum Outer dia (04))	-	500	-
CL 06(" Minimum Thickness (08)")	-	500	-
CL 06(Maximum Thickness (08))	-	500	-
10(Lengths)	-	500	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
9(Straightness)	-	500	-
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	500	-
Cl. 11.2 Table 2(Elongation)	-	500	-
Cl. 11.2 Table 2(Yield strength)	-	500	-
Cl. 6 , 6.2 Table 1(Square of radius of gyyration)	-	500	-
Cl. 6 , 6.2 Table 1(Radius of gyration)	-	500	-
Cl. 6 , 6.2 Table 1(Modulus of section)	-	500	-
Cl. 6 , 6.2 Table 1(Moment of inertia)	-	500	-
Cl. 6 , 6.2 Table 1(Surface internal)	-	500	-
Cl. 6 , 6.2 Table 1(Surface external)	-	500	-
Cl. 6 , 6.2 Table 1(Internal volume)	-	500	-
Cl. 6 , 6.2 Table 1(Area of cross section)	-	500	-
Cl. 6 , 6.2 Table 1(Weight)	-	500	-
Cl. 6 , 6.2 Table 1(Thickness)	-	500	-
Clause 11.2, Table -2(Elongation)	-	500	-
Clause 11.2, Table -2(Yield Strength)	-	500	-
Cl 13(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 6(Outer Diameter, Thickness & Mass)	-	500	-
Cl 7(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Workmanship)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 13(Workmanship)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	500	-
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Area of Cross Section - SOP MT-23)	-	500	-
8.0(Mass of Zinc coating - IS:6745)	-	500	-
8.0(Freedom from defects - IS 4736)	-	500	-
8.0(Uniformity of galvanized coating - IS 4736)	-	500	-
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	500	-
13.0(Oiling and Painting - Visual)	-	500	-
12(Marking)	-	500	-
CL 6("1.Outer dia (04) 2.Thickness (08)")	-	500	-
CL 06(Minimum Outer dia (04))	-	500	-
CL 06(Maximum Outer dia (04))	-	500	-
CL 06(" Minimum Thickness (08)")	-	500	-
CL 06(Maximum Thickness (08))	-	500	-
10(Lengths)	-	500	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	500	-

28 Nov, 2028

-
Included w.e.f. 17.03.2026

1404

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 3087 (2025)

Medium Density Particle Boards of Wood and other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	500	Rs- 19500/-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	500	Rs- 19500/-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	500	Rs- 19500/-
As per Clause 8, Table 2(Thickness, Sanded/finished panel - IS 2380 (Part 2))	-	500	Rs- 19500/-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	500	Rs- 19500/-
As per Clause 8, Table 2(Edge straightness, Max. -IS 2380 (Part 2))	-	500	Rs- 19500/-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	1000	Rs- 19500/-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	1000	Rs- 19500/-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	1500	Rs- 19500/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	1500	Rs- 19500/-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	1500	Rs- 19500/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	1500	Rs- 19500/-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	1500	Rs- 19500/-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	1500	Rs- 19500/-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	1500	Rs- 19500/-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	1000	Rs- 19500/-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	1000	Rs- 19500/-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	2500	Rs- 19500/-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	0	(optional test)
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	0	-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Thickness, Sanded/finished panel - IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Edge straightness, Max. -IS 2380 (Part 2))	-	0	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	0	-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	0	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	0	-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	0	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	0	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	0	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	0	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	0	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	0	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	0	-
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	0	-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Thickness, Sanded/finished panel - IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	0	-
As per Clause 8, Table 2(Edge straightness, Max. -IS 2380 (Part 2))	-	0	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	0	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	0	-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	0	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	0	-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	0	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	0	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	0	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	0	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	0	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	0	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	0	-

17 Mar, 2028

-
included w.e.f 14.01.2026

1405

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 18427 (2024)

Three piece round open top metal cans for foods and beverages -- Specification

All

34500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1.1(C)	-	34500	-
Cl-5.1.1(Si)	-	34500	-
Cl-5.1.1(Mn)	-	34500	-
Cl-5.1.1(P)	-	34500	-
Cl-5.1.1(S)	-	34500	-
Cl-5.1.2, Table-1("Tinplate Nominal Thickness- Flattened Body")	-	34500	-
Cl-5.1.2, Table-1(Built-up Can Body- Beaded)	-	34500	-
Cl-5.1.2, Table-1(Built-up Can Body- Un-beaded)	-	34500	-
Cl-5.1.2, Table-1(Tinplate Nominal Thickness- NEO Ends)	-	34500	-
Cl-5.1.2, Table-2(Tinplate Nominal Thickness- Un-beaded Body)	-	34500	-
Cl-5.1.2, Table-2(Tinplate Nominal Thickness- Beaded Body)	-	34500	-
Cl-5.1.2, Table-2(Tinplate Nominal Thickness- NEO End)	-	34500	-
Cl-5.1.2, Table-2(Tinplate Nominal Thickness- Ring)	-	34500	-
Cl-5.1.2, Table-2(Tinplate Nominal Thickness- Lid)	-	34500	-
Cl-5.1.3, Table-3 (i)(Mango pulp – Body and ends)	-	34500	-
Cl-5.1.3, Table-3 (ii)(Pineapple – Body and ends)	-	34500	-
Cl-5.1.3, Table-3 (iii)(All other thermally processed cans – Body and ends)	-	34500	-
Cl-5.1.3, Table-3 (iv)(Non-thermally processed can – Body and ends)	-	34500	-
Cl-5.1.3, Table-3 (v)(Ring and lid)	-	34500	-
Cl-5.1.3, Table-3 (vi)(POE ring)	-	34500	-
Cl-5.1.4(Surface Finish)	-	34500	-
Cl-5.1.5(Tin Grain Size)	-	34500	-
Cl-5.1.6(Iron Solution Value)	-	34500	-
Cl-5.1.7(Surface Oil)	-	34500	-
Cl-5.1.8(Passivation Treatment)	-	34500	-
Cl-5.1.9(Edge Camber and Out-of-Squareness)	-	34500	-
Cl-5.1.10(Mechanical Properties)	-	34500	-
Cl-5.2(Lacquers and Decorative Coatings)	-	34500	-
Cl-5.3(Inks)	-	34500	-
Cl-5.4(Lining Compound/Can End Sealants)	-	34500	-
Cl-5.5(Side Stripe Systems)	-	34500	-
Cl-5.6(Easy Open End)	-	34500	-
Cl-5.7(Aluminium Tagger)	-	34500	-
Cl-5.8(Peel Off Ends (POE))	-	34500	-
Cl-5.9(Surface Lubrications and Rust Prevention Oils)	-	34500	-
Cl-6.1, Table-5(Internal Diameter)	-	34500	-
Cl-6.1, Table-5(Necked-In Side Trade Size)	-	34500	-
Cl-6.1, Table-5(Necked-In Side Nominal Diameter)	-	34500	-
Cl-6.2(Capacities)	-	34500	-
Cl-7(Manufacture)	-	34500	-
Cl-8.1, Table-9 (i)(Thermally processed food cans)	-	34500	-
Cl-8.1, Table-9 (ii)(Nonthermally processed food cans)	-	34500	-
Cl-8.2(Vacuum Test)	-	34500	-
Cl-8.3(Migration Test)	-	34500	-
Cl-8.4(Specific Migration Limit (SML)	-	34500	-
Cl-10.1(Marking)	-	34500	-
7.2.1.2(Stack height specification)	-	34500	-
Cl-7.2.3.3(Testing- Moisture Retention)	-	34500	-

31 Dec, 2026

-
Included w.e.f. 24.12.2025

1406

MEKANIKA TESTING LABS LLP

8191236

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

Construction water ( Clause no. 5.4) and strength of concrete (Clause no. 16)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	500	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	500	-
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	500	-
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	500	-
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	500	-
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	500	-
5.4.2-IS: 3025(P-11)(Ph)	-	500	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	500	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	500	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	500	-
Cl 5.4 Table 1 (iv)(Chloride)	-	500	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	500	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	500	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	500	-
Cl 5.4 .2(pH)	-	500	-
Cl 5.4 (b)(Alkalinity)	-	500	-
Cl 5.4 (a)(Acidity)	-	500	-
16.1(Average Compressive Strength)	-	1000	-
16.1(Compressive Strength of Individual Samples )	-	1000	-
16.1(Compressive Strength of Individual Samples )	-	1000	-
16.1(Compressive Strength of Individual Samples )	-	1000	-
Clause 5.4(Description)	-	100	-
16.2(Flexural Strength)	-	1000	-
cl 5.4.4.3(Initial Setting Time)	-	0	-
cl 5.4.4.3(Initial Setting Time)	-	0	-

21 Nov, 2028

-
Included w.e.f 01.01.2026 For construction water only For compressive strength only

1407

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS/IEC 61683 (1999)

Photovoltaic systems - Power conditioners - Procedure for measuring efficiency

ALL

114000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Efficiency calculations)	-	30000	-
6(Efficiency test circuits)	-	30000	-
7(Loss measurement)	-	30000	-
Annex A(Power conditioner description)	-	2000	-
Annex B(Power efficiency and conversion factor)	-	3500	-
Annex C(Weighted average energy efficiency)	-	2500	-
Annex D(Derivation of efficiency tolerance in Table 2)	-	1500	-
4(Efficiency measurement conditions)	-	30000	-
4.1(DC power source for testing)	-	1000	-
4.2(Temperature)	-	1000	-
4.3(Output voltage and frequency)	-	1000	-
4.4(Input voltage)	-	1000	-
4.5(Ripple and distortion)	-	1000	-
4.6(Resistive loads/utility grid)	-	1000	-
4.7(Reactive loads)	-	1000	-
4.8(Resistive plus non-linear loads)	-	1000	-
4.9(Complex loads)	-	1000	-
5(Efficiency calculations)	-	-	-
6(Efficiency test circuits)	-	-	-
7(Loss measurement)	-	-	-
Annex A(Power conditioner description)	-	-	-
Annex B(Power efficiency and conversion factor)	-	-	-
Annex C(Weighted average energy efficiency)	-	-	-
Annex D(Derivation of efficiency tolerance in Table 2)	-	-	-
4(Efficiency measurement conditions)	-	-	-
4.1(DC power source for testing)	-	-	-
4.2(Temperature)	-	-	-
4.3(Output voltage and frequency)	-	-	-
4.4(Input voltage)	-	-	-
4.5(Ripple and distortion)	-	-	-
4.6(Resistive loads/utility grid)	-	-	-
4.7(Reactive loads)	-	-	-
4.8(Resistive plus non-linear loads)	-	-	-
4.9(Complex loads)	-	-	-

08 Feb, 2027

-
included w.e.f 30.01.2026

1408

Mbis Tescon Private Limited

8190506

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

All Variety

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Type of Fitting)	-	200	11000 for BIS testing charges and for others 1.5 times of BIS testing charges
4(Size Designation)	-	200	-
5(Colour of fittings)	-	200	-
7.1,Table 1(Wall thickness)	-	200	-
7.2 ,Table 2&3(Socket Dimensions)	-	1000	-
7.3(Dimensions of waste trap(Nahani Trap)	-	11000	-
8(Sealing Rings)	-	3000	-
10(Workmanship)	-	200	-
11(Design requirements)	-	200	-
11.1(Solvent cement type or Rubber ring type)	-	200	-
11.2(Socket and spigot configeration)	-	200	-
11.4,Table 5(Vent cowl)	-	11000	-
11.5,Table 6(Pipe Clips)	-	11000	-
12(Physical test requirements)	-	0	-
12.1(Visual appearance)	-	200	-
12.2(Stress relief test)	-	1500	-
12.3(Vicat softening tempewrature)	-	1500	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	1000	-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1000	-
Cl.15, Annex B(Sulphated Ash Content)	-	1500	-
16(Mechanical Properties)	-	0	-
16.1(Impact test)	-	1500	-
17(Watet tightness of joint)	-	1000	-
12.4(Effect on water test)	-	5000	-
7.4(Chamfer)	-	200	-
11.3(Access Openings)	-	200	-
Table 4(Dimension of Access Openings)	-	200	-
Cl 12.4(Effect on Water Lead (first extraction))	-	1000	-
Cl 12.4(Effect on Water Lead (third extraction))	-	1000	-
Cl 12.4(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	1000	-
Cl 12.4(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	1000	-
Cl 12.4(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	1000	-
19(Marking)	-	0	-

11 Nov, 2028

-
Included w.e.f 24.12.2025

1409

Mbis Tescon Private Limited

8190506

IS 13487 (2024)

Irrigation Equipment — Emitters — Specification

All Variety

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7.2(Flow Paths in Emitter)	-	500	5500 for BIS testing charges and for others 1.5 times of BIS testing Charges
Cl-7.4(Emitter Pull-Out)	-	800	-
Cl-8.1.1(Uniformity of Emission Rate)	-	1000	-
Cl-7.3(Resistance to Hydrostatic Pressure)	-	1000	-
Cl-7.1(Construction and Workmanship)	-	100	-
Cl-8.1.2(Emission Rate as Function of Inlet Pressure)	-	1000	-
Cl-5.1(Connections)	-	100	-
Cl-8.1.3(Determination of Emitter Exponent)	-	1000	-
Cl-5.2(Emitter Ends)	-	0	-
Cl-5.3(Materials)	-	0	-
Cl-6.1(Test Specimens)	-	0	-
Cl-6.2.1(polyethylene pipe)	-	0	-
Cl-6.2.2("grease or chemicals ")	-	0	-
Cl-6.2.3(water temperature)	-	0	-
Cl-6.3(Accuracy or Measuring Devices)	-	0	-
Cl-7.4.1(In-Line Emitters)	-	0	-
Cl-7.4.2(On-Line Emitters)	-	0	-
Cl-9(Marking)	-	0	-

11 Nov, 2028

-
Included w.e.f 24.12.2025

1410

National Test House (WR) - NTH, Mumbai

7107604

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1000	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	500	-
Cl 14(Workmanship)	-	500	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	500	-
Cl 14(Workmanship)	-	500	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	500	-
Cl 14(Workmanship)	-	1000	-
5.2(phosphorus)	-	500	-
5.2(sulphur)	-	500	-
Cl 14(Workmanship)	-	500	-
Cl 12(Bituminous Coating & Galvanizing )	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	500	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face)	-	500	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing)	-	500	-
Cl 14(Workmanship)	-	500	-
11.0(Alignment test IS 4270: 2001)	-	13500	-
Cl. 8(Hydrostatic test)	-	5000	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1000	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	1500	-
Cl 14(Workmanship)	-	1000	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1000	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	1500	-
Cl 14(Workmanship)	-	1000	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	1500	-
Cl 12(Bituminous Coating & Galvanizing )	-	1500	-
Cl 14(Workmanship)	-	1000	-
Cl 14(Workmanship)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 6(Tensile Test & Flattening Test)	-	3000	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	1000	-
Cl 9(Pipe ends, Angle of bevel & Root Face)	-	1000	-
Cl 10(Outer Diameter & Overall Length)	-	1000	-
Cl 12(Bituminous Coating & Galvanizing)	-	1500	-
Cl 14(Workmanship)	-	1000	-
11.0(Alignment test IS 4270: 2001)	-	1000	-
Cl. 8(Hydrostatic test)	-	2500	-

24 Jul, 2025

-
included w.e.f 24.03.2026

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number