| 1441 |
AUMNAMAH RADIOANALYTICAL LABORATORY LLP
| 8198616
| IS 10500 (2012) |
Drinking water - Specification (Second Revision) |
- |
9600 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4, Table (4), (i), (a)(Alpha emitters Bq/l, Max) |
- |
3200 |
|
30% Discount for BIS Samples |
| 4, Table (4), (i), (b)(Beta emitters Bq/l, Max) |
- |
3200 |
|
30% Discount for BIS Samples |
| Table 3, x)(Uranium) |
- |
3200 |
|
30% Discount for BIS Samples |
|
21 Jul, 2029 |
-
Exclusion sought
for all parameters except:
Table (4), (i), (a)
(Alpha emitters Bq/l, Max)
Table (4), (i), (b)
(Beta emitters Bq/l, Max)
Table 3, x)
(Uranium) |
| 1442 |
CIPET, Ahmedabad
| 7116134
| IS 17546 (2021) |
Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification |
- |
167250.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Nominal Size(DN)) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.2(Nominal Outside Diameter) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.3(Mean Inside Diameter of Socket at Entry) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.4(Mean Inside Diameter of Socket at Shoulder (Bottom)) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.4(Mean Inside Diameter of Socket at Shoulder (Bottom)) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.5(Out-of-Roundness (Ovality)) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.6(Nominal Wall Thickness) |
- |
500 |
|
- |
| 3.7(Minimum Wall Thickness) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.8(Tolerance) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.9(Working Pressure) |
- |
0 |
|
- |
| 3.1(Standard Dimension Ratio) |
- |
0 |
|
- |
| 3.11(Type Tests) |
- |
15800 |
|
Type test (95°C /165 h.)
Type test (95°C /1000 h.) |
| 3.11(Acceptance Tests) |
- |
850 |
|
Acceptance test (27°C /1 h.) |
| 6(Composition) |
- |
19400 |
|
Resin K-Value 1100
Resin Chlorine content 4500
Form 500
Compound chlorine content 4500
Appearance 500
Vicat Softening temp. (VST) 1100+625
Charpy Impact test 1100+625
Tensile Strength 1300+625
Tensile modulus 1100+625
Ash content 1200 |
| 7(Dimensions of fitting) |
- |
500 |
|
- |
| 8.2(Opacity) |
- |
700 |
|
- |
| 8.1(Visual Appearance) |
- |
500 |
|
- |
| 8.3(Stress Relief Test) |
- |
700 |
|
- |
| 8.4(Vicat softening Temperature) |
- |
1100 |
|
- |
| 8.5(Density) |
- |
700 |
|
- |
| 8.6(Effect on water) |
- |
5000 |
|
- |
| 9(Mechanical Properties) |
- |
0 |
|
Included in 3.11 (Acceptance Tests)
3.11 (TypeTests) |
| 11(Marking) |
- |
0 |
|
- |
| Cl-6.2.5(Verification of the Malfunction Temperature) |
- |
11500 |
|
Test Charge Rs. 11000/-
Specimen charges 500/- |
| Cl-9.1(Hydrostatic Characteristics) |
- |
0 |
|
Included in 3.11 |
| Cl-9.2(Thermal Stability by Hydrostatic Pressure Testing) |
- |
110500.00 |
|
Test Charge 1000/-
Specimen conditioning charge (8760hrs) 109500/- |
| Cl-6.2.2(Compound Chlorine Content) |
- |
0 |
|
Included in 6.0 |
| 3.1(Nominal Size(DN)) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.2(Nominal Outside Diameter) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.3(Mean Inside Diameter of Socket at Entry) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.4(Mean Inside Diameter of Socket at Shoulder (Bottom)) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.4(Mean Inside Diameter of Socket at Shoulder (Bottom)) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.5(Out-of-Roundness (Ovality)) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.6(Nominal Wall Thickness) |
- |
500 |
|
- |
| 3.7(Minimum Wall Thickness) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.8(Tolerance) |
- |
0 |
|
Included in Clause No 7.0 |
| 3.9(Working Pressure) |
- |
0 |
|
- |
| 3.1(Standard Dimension Ratio) |
- |
0 |
|
- |
| 3.11(Type Tests) |
- |
15800 |
|
Type test (95°C /165 h.)
Type test (95°C /1000 h.) |
| 3.11(Acceptance Tests) |
- |
850 |
|
Acceptance test (27°C /1 h.) |
| 6(Composition) |
- |
19400 |
|
Resin K-Value 1100
Resin Chlorine content 4500
Form 500
Compound chlorine content 4500
Appearance 500
Vicat Softening temp. (VST) 1100+625
Charpy Impact test 1100+625
Tensile Strength 1300+625
Tensile modulus 1100+625
Ash content 1200 |
| 7(Dimensions of fitting) |
- |
500 |
|
- |
| 8.2(Opacity) |
- |
700 |
|
- |
| 8.1(Visual Appearance) |
- |
500 |
|
- |
| 8.3(Stress Relief Test) |
- |
700 |
|
- |
| 8.4(Vicat softening Temperature) |
- |
1100 |
|
- |
| 8.5(Density) |
- |
700 |
|
- |
| 8.6(Effect on water) |
- |
5000 |
|
- |
| 9(Mechanical Properties) |
- |
0 |
|
Included in 3.11 (Acceptance Tests) |
| 11(Marking) |
- |
0 |
|
- |
| Cl-6.2.5(Verification of the Malfunction Temperature) |
- |
11500 |
|
Test Charge Rs. 11000/-
Specimen charges 500/- |
| Cl-9.1(Hydrostatic Characteristics) |
- |
0 |
|
Included in 3.11 |
| Cl-9.2(Thermal Stability by Hydrostatic Pressure Testing) |
- |
110500.00 |
|
Test Charge 1000/-
Specimen conditioning charge (8760hrs) 109500/- |
| Cl-6.2.2(Compound Chlorine Content) |
- |
0 |
|
Included in 6.0 |
|
31 Dec, 2027 |
-
included w.e.f 09.03.2026 |
| 1443 |
Ace Test Labs & Metrology Pvt. Ltd., Sonipat
| 9162826
| IS 17017 : Part 2 : Sec 1 (2020) |
Electric Vehicle Conductive Charging System Part 2 Plugs, Socket-Outlets, Vehicle Connectors, and Vehicle Inlets Section 1 General requirements |
- |
250000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(General Requirements) |
- |
30000 |
|
- |
| 4.2(General Notes on Tests) |
- |
30000 |
|
- |
| 5(RATINGS) |
- |
30000 |
|
- |
| 6 Table. No. 1 ,2 , 3and 4 (CONNECTION BETWEEN THE POWER SUPPLY AND THE ELECTRIC VEHICLE) |
- |
30000 |
|
- |
| 7(CLASSIFICATION OF ACCESSORIES) |
- |
30000 |
|
- |
| 8(MARKING) |
- |
30000 |
|
- |
| 9(DIMENSIONS) |
- |
30000 |
|
- |
| 10(PROTECTION AGAINST ELECTRIC SHOCK) |
- |
50000 |
|
- |
| 11, Table no. 6(SIZE AND COLOUR OF PROTECTIVE EARTHING CONDUCTORS) |
- |
50000 |
|
- |
| 12, Table no. 5(PROVISIONS FOR PROTECTIVE EARTHING) |
- |
50000 |
|
- |
| 13, Table no. 6and 7(TERMINALS) |
- |
50000 |
|
- |
| 14, Tabke no. 8 and 9(INTERLOCKS) |
- |
50000 |
|
- |
| 15(RESISTANCE TO AGEING OF RUBBER AND THERMOPLASTIC MATERIAL) |
- |
50000 |
|
- |
| 16, Table no. 10(GENERAL CONSTRUCTION) |
- |
50000 |
|
- |
| 17, table 11,12and 13(CONSTRUCTION OF SOCKET-OUTLETS) |
- |
50000 |
|
- |
| 18(CONSTRUCTION OF PLUGS AND VEHICLE CONNECTORS) |
- |
50000 |
|
- |
| 19(CONSTRUCTION OF VEHICLE INLETS) |
- |
50000 |
|
- |
| 20(DEGREES OF PROTECTION) |
- |
50000 |
|
- |
| 21, Table no. 14(IN+I33SULATION RESISTANCE AND DIELECTRIC STRENGTH) |
- |
50000 |
|
- |
| 22, Table no. 15(BREAKING CAPACITY) |
- |
50000 |
|
- |
| 23, Table no. 16(NORMAL OPERATION) |
- |
50000 |
|
- |
| 24, Table no. 17(TEMPERATURE RISE) |
- |
50000 |
|
- |
| 25, Table no. 18(FLEXIBLE CABLES AND THEIR CONNECTION) |
- |
50000 |
|
- |
| 26, Table no.19, 20,21,22(MECHANICAL STRENGTH) |
- |
50000 |
|
- |
| 27(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS) |
- |
50000 |
|
- |
| 28(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES) |
- |
50000 |
|
- |
| 29(RESISTANCE TO HEAT, TO FIRE AND TO TRACKING) |
- |
50000 |
|
- |
| Cl-31(Short-circuit current withstand test) |
- |
50000 |
|
- |
| Cl-33(Vehicle drive-over test) |
- |
100000 |
|
- |
| Cl-32(ELECTROMAGNETIC COMPATIBILITY) |
- |
150000 |
|
- |
|
14 Nov, 2027 |
-
Included w.e.f. 04.06.2026 |
| 1444 |
TEKNOLAB QUALITY SERVICES PRIVATE LIMITED
| 8196926
| IS 302 : Part 2 : Sec 15 (2009) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision) |
- |
45000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0(Classification) |
- |
1000 |
|
- |
| 7(Marking and instructions) |
- |
2000 |
|
- |
| 8(Protection against live parts) |
- |
2000 |
|
- |
| 9(STARTING OF MOTOR-OPERATED APPLIANCES) |
- |
5000 |
|
- |
| 10(POWER INPUT AND CURRENT) |
- |
10000 |
|
- |
| 11(HEATING) |
- |
15000 |
|
- |
| 13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE) |
- |
10000 |
|
- |
| 14(TRANSIENT OVERVOLTAGES) |
- |
2000 |
|
- |
| 15(MOISTURE RESISTANCE) |
- |
5000 |
|
- |
| 16(LEAKAGE CURRENT AND ELECTRIC STRENGTH) |
- |
10000 |
|
- |
| 17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS) |
- |
2000 |
|
- |
| 18(ENDURANCE) |
- |
5000 |
|
- |
| 19(ABNORMAL OPERATION) |
- |
5000 |
|
- |
| 20(STABILITY AND MECHANICAL HAZARDS) |
- |
2000 |
|
- |
| 21(MECHANICAL STRENGTH) |
- |
2000 |
|
- |
| 22(CONSTRUCTION) |
- |
5000 |
|
- |
| 23(INTERNAL WIRING) |
- |
2000 |
|
- |
| 24(COMPONENTS) |
- |
5000 |
|
- |
| 25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS) |
- |
2000 |
|
- |
| 26(TERMINALS FOR EXTERNAL CONDUCTORS) |
- |
2000 |
|
- |
| 27(PROVISION FOR EARTHING) |
- |
5000 |
|
- |
| 28(SCREWS AND CONNECTIONS) |
- |
5000 |
|
- |
| 29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION) |
- |
2000 |
|
- |
| 30(RESISTANCE TO HEAT AND FIRE) |
- |
5000 |
|
- |
| 31(RESISTANCE TO RUSTING) |
- |
2000 |
|
- |
| 32(RADIATION, TOXICITY AND SIMILAR HAZARDS) |
- |
2000 |
|
- |
| 22.106(Interlocks) |
- |
2000 |
|
- |
| 22.47(Water pressure inlet) |
- |
2000 |
|
- |
| 22.3(Flexing test) |
- |
2000 |
|
- |
| 24(Components) |
- |
5000 |
|
- |
| 4(General requirements) |
- |
2000 |
|
- |
| 5(General Conditions of tests) |
- |
2000 |
|
- |
| 6(Classification- IS 302-1) |
- |
1000 |
|
- |
| 6(Classification- IS 302-1) |
- |
1000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.1(Marking- IS 302-2-15) |
- |
1000 |
|
- |
| 7.3(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.4(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.5(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.6(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.7(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.8(Marking- IS 302-1) |
- |
500 |
|
- |
| 6(Classification- IS 302-1) |
- |
1000 |
|
- |
| 6(Classification- IS 302-1) |
- |
1000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
1000 |
|
- |
| Marking- IS 302-1(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.1(Marking- IS 302-2-15) |
- |
1000 |
|
- |
| 7.3(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.4(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.5(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.6(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.7(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.8(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.9(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.1O(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.11(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.12(Marking- IS 302-2-15) |
- |
1000 |
|
- |
| 7.12(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.12.1(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.12.3(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.12.5(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.12.6(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.13(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.14(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.15(Marking- IS 302-1) |
- |
1000 |
|
- |
| 7.101(Marking- IS 302-2-15) |
- |
1000 |
|
- |
| 8(Protection Against Electric Shock, IS 302-1) |
- |
1000 |
|
- |
| 10(Power Input and Current, IS 302-1) |
- |
5000 |
|
- |
| 11(Heating, IS 302-1) |
- |
10000 |
|
- |
| 11(Heating, IS 302-1) |
- |
10000 |
|
- |
| 11(Heating, IS 302-1) |
- |
10000 |
|
- |
| 11(Heating, IS 302-1) |
- |
10000 |
|
- |
| 13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1) |
- |
5000 |
|
- |
| 13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1) |
- |
5000 |
|
- |
| 15.1(Moisture Resistance, IS 302-1) |
- |
5000 |
|
- |
| 15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15) |
- |
1000 |
|
- |
| 16(Leakage current as per Cl 16, IS 302-1) |
- |
5000 |
|
- |
| 16(electric strength as per Cl 16, IS 302-1) |
- |
5000 |
|
- |
| 17(Overload protection of Transformers and Associated Circuits, IS 302-1) |
- |
1000 |
|
- |
| 19.13(Abnormal Operation as per Cl 19, IS 302-2-15) |
- |
1000 |
|
- |
| 19.13(Abnormal Operation as per Cl 19, IS 302-1) |
- |
1000 |
|
- |
| 19.13(Abnormal Operation as per Cl 19, IS 302-1) |
- |
1000 |
|
- |
| 19.13(Abnormal Operation as per Cl 19, IS 302-1) |
- |
1000 |
|
- |
| 20.1(Stability & Mechanical Hazards, IS 302-1) |
- |
2000 |
|
- |
| 21.1(Mechanical Strength, IS 302-1) |
- |
1000 |
|
- |
| 21.2(Mechanical Strength, IS 302-1) |
- |
1000 |
|
- |
| 22.1(Construction, IS 302-1) |
- |
1000 |
|
- |
| 22.7(Construction as per Cl 22.7, IS 3.02-2-15) |
- |
2000 |
|
- |
| 22.107(Construction as per Cl 22.7, IS 3.02-2-15) |
- |
1000 |
|
- |
| 22.108(Construction as per Cl 22.8, IS 3.02-2-15) |
- |
1000 |
|
- |
| 23.1(Internal Wiring, IS 302-1) |
- |
1000 |
|
- |
| 23.2(Internal Wiring, IS 302-1) |
- |
1000 |
|
- |
| 23.4(Internal Wiring, IS 302-1) |
- |
1000 |
|
- |
| 23.5(Internal Wiring, IS 302-1) |
- |
1000 |
|
- |
| 23.6(Internal Wiring, IS 302-1) |
- |
1000 |
|
- |
| 23.7(Internal Wiring, IS 302-1) |
- |
1000 |
|
- |
| 23.8(Internal Wiring, IS 302-1) |
- |
1000 |
|
- |
| 23.9(Internal Wiring, IS 302-1) |
- |
1000 |
|
- |
| 23.1O(Internal Wiring, IS 302-1) |
- |
1000 |
|
- |
| 25.1(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.2(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.5(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.6(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.8(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.9(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.1(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.11(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.12(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.13(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.14(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.14(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.15(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.16(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.17(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.18(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.19(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.2(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.21(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 25.22(Supply Connection and External Flexible Cords, IS 302-1) |
- |
1000 |
|
- |
| 26(Terminals for External Conductors, IS 302-1) |
- |
1000 |
|
- |
| 27.1(Provision for Earthing, IS 302-1) |
- |
2000 |
|
- |
| 27.2(Provision for Earthing, IS 302-1) |
- |
2000 |
|
- |
| 27.3(Provision for Earthing, IS 302-1) |
- |
2000 |
|
- |
| 27.4(Provision for Earthing, IS 302-1) |
- |
2000 |
|
- |
| 27.5(Provision for Earthing, IS 302-1) |
- |
2000 |
|
- |
| 28(Screws & Connections, IS 302-1) |
- |
2000 |
|
- |
| 29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1) |
- |
2000 |
|
- |
| 29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1) |
- |
2000 |
|
- |
| 30.1(Resistance to Heat and Fire, IS 302-1) |
- |
2000 |
|
- |
| 30.2(Resistance to Heat and Fire, IS 302-1) |
- |
2000 |
|
- |
| 31(Resistance of Rusting, IS 302-1) |
- |
2000 |
|
- |
| Cl. 15.02(stands for cordless kettles) |
- |
2000 |
|
- |
| Cl.22.103(appliance coupler of cordless kettles) |
- |
2000 |
|
- |
| Cl-19.3(Abnormal operation test) |
- |
2000 |
|
- |
| Cl-19.101("Abnormal operation test
") |
- |
2000 |
|
- |
| Cl-19.102("Abnormal operation test
") |
- |
2000 |
|
- |
| Cl-19.103("Abnormal operation test
") |
- |
2000 |
|
- |
| Cl-22.103(Construction) |
- |
2000 |
|
- |
| Cl-25.101(" Supply connection And external flexible ") |
- |
2000 |
|
- |
|
- |
-
Included w.e.f-18.06.2026
"19.11.4.1 (Electrostatic discharges)
19.11.4.2 (Radiated fields)
19.11.4.3 (Fast transient bursts)
19.11.4.4 (Surge immunity test)
19.11.4.6 (Class 3 Voltage dips and interruptions)
19.11.4.7 (Harmonics)
22.16 (Automatic cord reel)
22.32 (Oxygen bomb for rubber material)
19.11.4.5 (Immunity to conducted discharges)" |
| 1445 |
Elutech Laboratory and Calibration Services, Jaipur
| 9179806
| IS 2202 : Part 1 (2023) |
WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision |
BWP/MR, BD/BN/PD/PN/MD/MN, All size covered in IS 2202 Part 1: 2023 |
24000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.1(Workmanship & Finish) |
- |
500 |
|
- |
| 9.2(Workmanship & Finish) |
- |
500 |
|
- |
| 9.3(Workmanship & Finish) |
- |
500 |
|
- |
| 11.1(Dimensions - Height) |
- |
500 |
|
- |
| 11.1(Dimensions - Width) |
- |
500 |
|
- |
| 11.1(Dimensions - Thickness) |
- |
500 |
|
- |
| 11.1(Dimensions - Variation in thickness) |
- |
500 |
|
- |
| 11.1(Dimensions - Squareness) |
- |
500 |
|
- |
| 11.12(End immersion test) |
- |
1000 |
|
- |
| 11.13(Knife Test) |
- |
1000 |
|
- |
| 11.14(Glue Adhesion Test) |
- |
1000 |
|
- |
| 4(GRADE) |
- |
0 |
|
- |
| 4(TYPE) |
- |
0 |
|
- |
| 5(SIZES) |
- |
0 |
|
- |
| 7.1.1(CONSTRUCTION-Blockboard Core) |
- |
500 |
|
- |
| 7.1.1(CONSTRUCTION-Blockboard Core) |
- |
500 |
|
- |
| 7.1.2(CONSTRUCTION-Blockboard Core) |
- |
500 |
|
- |
| 7.3.2(CONSTRUCTION-Stiles and Rails) |
- |
500 |
|
- |
| 7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints) |
- |
500 |
|
- |
| 7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints) |
- |
500 |
|
- |
| 7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints) |
- |
500 |
|
- |
| 7.3.3(CONSTRUCTION-Stiles and Rails) |
- |
500 |
|
- |
| 9.1(WORKMANSHIP AND FINISH) |
- |
500 |
|
- |
| 9.2(WORKMANSHIP AND FINISH) |
- |
500 |
|
- |
| 9.3(WORKMANSHIP AND FINISH) |
- |
500 |
|
- |
| 11.1(Dimensions and Squareness Test) |
- |
500 |
|
- |
| 11.1(Dimensions and Squareness Test) |
- |
500 |
|
- |
| 11.1(Dimensions and Squareness Test) |
- |
500 |
|
- |
| 11.1(Dimensions and Squareness Test) |
- |
500 |
|
- |
| 11.1(Dimensions and Squareness Test) |
- |
500 |
|
- |
| 11.2(General Flatness Test) |
- |
500 |
|
- |
| 11.2(General Flatness Test) |
- |
500 |
|
- |
| 11.2(General Flatness Test) |
- |
500 |
|
- |
| 11.3(Local Planeness Test) |
- |
500 |
|
- |
| 11.4(Impact Indentation Test) |
- |
1000 |
|
- |
| 11.4(Impact Indentation Test) |
- |
1000 |
|
- |
| 11.5(Flexure Test) |
- |
1000 |
|
- |
| 11.5(Flexure Test) |
- |
1000 |
|
- |
| 11.6(Edge Loading Test) |
- |
1000 |
|
- |
| 11.6(Edge Loading Test) |
- |
1000 |
|
- |
| 11.6(Edge Loading Test) |
- |
1000 |
|
- |
| 11.6(Edge Loading Test) |
- |
1000 |
|
- |
| 11.7.1(Shock Resistance Test) |
- |
1000 |
|
- |
| 11.7.2(Shock Resistance Test) |
- |
1000 |
|
- |
| 11.8(Buckling Test) |
- |
1000 |
|
- |
| 11.8(Buckling Test) |
- |
1000 |
|
- |
| 11.8(Buckling Test) |
- |
1000 |
|
- |
| 11.9.2(Slamming Test) |
- |
1000 |
|
- |
| 11.9.3(Slamming Test) |
- |
1000 |
|
- |
| 11.10(Misuse Test) |
- |
1000 |
|
- |
| 11.11(Varying Humidity Test) |
- |
11000 |
|
- |
| 11.11(Varying Humidity Test) |
- |
11000 |
|
- |
| 11.12(End Immersion Test) |
- |
1000 |
|
- |
| 11.13(Knife Test) |
- |
1000 |
|
- |
| 11.14(Glue Adhesion Test) |
- |
1000 |
|
- |
| 11.15(Screw Withdrawal Resistance Test) |
- |
1000 |
|
- |
| 11.15(Screw Withdrawal Resistance Test) |
- |
1000 |
|
- |
| Clause 4.2(grades specified) |
- |
0 |
|
- |
| Clause 5(SIZES) |
- |
0 |
|
- |
| Clause 6.1.1(species of timber) |
- |
0 |
|
- |
| Clause 6.1.2(list of species) |
- |
0 |
|
- |
| Clause 6.1.3(moisture content) |
- |
1000 |
|
- |
| Clause 6.2.1(Plywood) |
- |
9000 |
|
- |
| Clause 6.2.2(Decorative plywood) |
- |
9000 |
|
- |
| Clause 6.3(Cross-Bands) |
- |
500 |
|
- |
| Clause 6.4.1(Commercial Face
Veneers) |
- |
500 |
|
- |
| Clause 6.4.2(Decorative Face
Veneers) |
- |
500 |
|
- |
| Clause 6.6.1(Adhesives) |
- |
9000 |
|
- |
| Clause 6.8(Medium density
fibre board) |
- |
15000 |
|
- |
| Clause 6.9(Alternative Materials) |
- |
9000 |
|
- |
| Clause 7.1(Blockboard Core) |
- |
1000 |
|
- |
| Clause 7.2(Particle Board or
Medium Density Fibre) |
- |
1000 |
|
- |
| Clause 7.3(Stiles and Rails) |
- |
500 |
|
- |
| Clause 7.4(Levelling) |
- |
500 |
|
- |
| Clause 7.5(Face Panel) |
- |
500 |
|
- |
| Clause 7.6(Lipping) |
- |
500 |
|
- |
| Clause 7.7(Rebating) |
- |
500 |
|
- |
| Clause 7.8(Opening for Glazing) |
- |
500 |
|
- |
| Clause 7.9(Venetian) |
- |
500 |
|
- |
| Clause 8.1(Locks) |
- |
500 |
|
- |
| Clause 9(WORKMANSHIP AND
FINISH) |
- |
500 |
|
- |
| Clause 10.1(Classification of Tests) |
- |
500 |
|
- |
| Clause 11.1(Dimensions and
Squareness Test) |
- |
500 |
|
- |
| Clause 11.2(General Flatness Test) |
- |
500 |
|
- |
| Clause 11.3(Local Planeness Test) |
- |
500 |
|
- |
| Clause 11.4(Impact Indentation Test) |
- |
1000 |
|
- |
| Clause 11.5(Flexure Test) |
- |
1000 |
|
- |
| Clause 11.6(Edge Loading Test) |
- |
1000 |
|
- |
| Clause 11.7(Shock Resistance Test) |
- |
1000 |
|
- |
| Clause 11.8(Buckling Resistance Test) |
- |
1000 |
|
- |
| Clause 11.9(Slamming Test) |
- |
1000 |
|
- |
| Clause 11.10(Misuse Test) |
- |
1000 |
|
- |
| Clause 11.11(Varying Humidity Test) |
- |
11000 |
|
- |
| Clause 11.12(End Immersion Test) |
- |
1000 |
|
- |
| Clause 11.13(Knife Test) |
- |
1000 |
|
- |
| Clause 11.14(Glue Adhesion Test) |
- |
1000 |
|
- |
| Clause 11.15(Screw Withdrawal
Resistance Test) |
- |
1000 |
|
- |
| Clause 12(SAMPLING AND CRITERIA
FOR CONFORMITY) |
- |
0 |
|
- |
| Clause 13(ADDITIONAL REQUIREMENTS
FOR ECO MARK) |
- |
0 |
|
- |
| Clause 14(Marking) |
- |
0 |
|
- |
| 4(Grade, Type and Construction) |
- |
0 |
|
- |
| 5(Sizes and Thickness) |
- |
0 |
|
- |
| 6.1(Timber) |
- |
0 |
|
- |
| 6.2(Plywood for flush door shutter) |
- |
9000 |
|
- |
| 6.3(Cross-Bands ) |
- |
500 |
|
- |
| 6.4.1(Commercial Face Veneers) |
- |
500 |
|
- |
| 6.4.2(Decorative face veneers) |
- |
500 |
|
- |
| 6.6(Adhesives) |
- |
9000 |
|
- |
| 6.7(Particle Board) |
- |
15000 |
|
- |
| 6.8(Medium Density Fibre) |
- |
15000 |
|
- |
| 6.9(Alternative Materials) |
- |
9000 |
|
- |
| 7(Construction) |
- |
1000 |
|
- |
| 8.1(Locks) |
- |
500 |
|
- |
| 8.2(Other Fittings) |
- |
500 |
|
- |
| 9(Workmanship and Finish) |
- |
500 |
|
- |
| 10(Tests) |
- |
0 |
|
- |
| 11.1(Dimensions and Squareness Test) |
- |
500 |
|
- |
| 11.2(General Flatness Test) |
- |
500 |
|
- |
| 11.3(Local Planeness Test) |
- |
500 |
|
- |
| 11.4(Impact Indentation Test) |
- |
1000 |
|
- |
| 11.5(Flexure Test) |
- |
1000 |
|
- |
| 11.6(Edge Loading Test) |
- |
1000 |
|
- |
| 11.7(Shock Resistance Test) |
- |
1000 |
|
- |
| 11.8(Buckling Resistance Test) |
- |
1000 |
|
- |
| 11.9(Slamming Test) |
- |
1000 |
|
- |
| 11.1(Misuse Test) |
- |
1000 |
|
- |
| 11.11(Varying Humidity Test) |
- |
11000 |
|
- |
| 11.12(End Immersion Test) |
- |
1000 |
|
- |
| 11.13(Knife Test) |
- |
1000 |
|
- |
| 11.14(Glue Adhesion Test) |
- |
1000 |
|
- |
| 11.15(Screw Withdrawal Resistance Test) |
- |
1000 |
|
- |
| 14(Marking ) |
- |
0 |
|
- |
| Cl-13(ADDITIONAL REQUIREMENTS FOR ECO
MARK) |
- |
0 |
|
- |
| Clause 6.7(Particle Board) |
- |
15000 |
|
- |
|
26 Aug, 2027 |
-
Included w.e.f. 05.06.2026 |
| 1446 |
AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI
| 7184406
| IS 10701 (2012) |
Structural plywood - Specification (First Revision) |
ALL |
17650 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 11.3(Glue Shear strength in dry state) |
- |
1000 |
|
20% DISCOUNT FOR BIS GSTIN EXTRA AS PER GOVT RULE |
| 11.4.1(Resistance to Water) |
- |
2500 |
|
- |
| 11.4.2(Resistance to Water) |
- |
2500 |
|
- |
| 11.5(Resistance to Micro-organisms) |
- |
2800 |
|
- |
| 11.6(Tensile Strength) |
- |
1000 |
|
- |
| 11.7.1(Compressive Strength, Bending Strength, Panel Shear Strength, Plate Shear Strength and Rolling Shear Strngth) |
- |
3000 |
|
- |
| 11.8(Wet Bending Strength) |
- |
2000 |
|
- |
| Clause 11.2(Moisture content) |
- |
400 |
|
- |
| Cl-8(Dimension and tolerances) |
- |
1200 |
|
- |
| Cl-9(Workmanship and finish) |
- |
100 |
|
- |
| Cl-7.1(Veneers) |
- |
200 |
|
- |
| Cl-7.2(Construction) |
- |
200 |
|
- |
| Cl-11.9(Retention of preservatives) |
- |
3000 |
|
- |
| Cl-4(Material) |
- |
0 |
|
CL.4 ADHESIVE EXTRA CHARGES |
| Cl-5(Plywood) |
- |
0 |
|
- |
| Clause. 7.3(Consruction Inclination) |
- |
0 |
|
- |
| Clause. 7.4(Moisture content) |
- |
400 |
|
- |
| Cl-8.2(Thicnkess) |
- |
200 |
|
- |
| Cl-8.3.1(Length) |
- |
200 |
|
- |
| Cl-8.3.1(width) |
- |
200 |
|
- |
| Cl-8.3.1(Tolerances- Thickness) |
- |
200 |
|
- |
| Cl-8.3.1(Edge Straightness) |
- |
200 |
|
- |
| Cl-8.3.1(Squareness) |
- |
200 |
|
- |
| Cl-11.6, Table-3 (i)((Modulus of Rupture: Across the Face Grain: Min Ind.)) |
- |
1500 |
|
- |
| Cl-11.8, Table-4((Modulus of Rupture: Across the Face Grain: Avg)) |
- |
1500 |
|
- |
| Cl-11.8, Table-4((Modulus of Rupture: Along the Face Grain: Min Ind)) |
- |
1500 |
|
- |
| Cl-11.8, Table-4(Modulus of Rupture: Along the Face Grain: Avg)) |
- |
1500 |
|
- |
| Cl-11.8, Table-4(Modulus of Elasticity: Across the Face Grain: Min Ind) |
- |
1500 |
|
- |
| Cl-11.8, Table-4((Modulus of Elasticity: Across the Face Grain: Avg)) |
- |
1500 |
|
- |
| Cl-11.8, Table-4((Modulus of Elasticity: Along the Face Grain: Min Ind)) |
- |
1500 |
|
- |
|
- |
-
Included w.e.f 24.03.2026 |
| 1447 |
National Council for Cement and Building Materials (NCCBM), Hyderabad
| 6114835
| IS 16415 (2015) |
Composite cement - Specification |
- |
34440 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 -Table - 2 i(Insoluble residue - Cl 4.10 of IS 4032:1985) |
- |
2340 |
|
no |
| 6 -Table - 2 ii(Magnesia - Cl 4.8 of IS 4032:1985) |
- |
3040 |
|
no |
| 6 -Table - 2 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985) |
- |
2340 |
|
no |
| 6 -Table - 2 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985) |
- |
2340 |
|
no |
| 6 -Table - 2 v(Loss on ignition - Cl 4.2 of IS 4032:1985) |
- |
1180 |
|
no |
| 6 -Table - 2 vi(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
2340 |
|
no |
| 7 and Table 3 i(Fineness
IS 4031(Part 2)) |
- |
1950 |
|
no |
| 7 and Table 3 ii a(Soundness, Le-Chate1ier expansion
IS 4031(Part 3) ) |
- |
1950 |
|
no |
| 7 and Table 3 ii b(Soundness, Autoclave expansion
IS 4031(Part 3) ) |
- |
3510 |
|
no |
| 7 and Table 3 iii a(Setting Time ( by Vicat Apparatus), Initial
IS 4031(Part 5)) |
- |
875 |
|
no |
| 7 and Table 3 iii b(Setting Time ( by Vicat Apparatus ), Final
IS 4031(Part 5)) |
- |
875 |
|
no |
| 7 and Table 3 iv a(Compretsive Strenqth .72 ± 1 hr
IS 4031(Part 6)) |
- |
2000 |
|
no |
| 7 and Table 3 iv b(Compretsive Strenqth 168 ± 2 hr
IS 4031(Part 6)) |
- |
2270 |
|
no |
| 7 and Table 3 iv c(Compretsive Strenqth 672 ± 4 hr
IS 4031(Part 6)) |
- |
2660 |
|
no |
| 7 and Table 3 v(Drying shrinkage
IS 4031(Part 10)) |
- |
2820 |
|
no |
| 7 and Table 3 vi(Transverse strength (optional)
IS 4031(Part 8) ) |
- |
14240 |
|
For 3, 7 & 28 days |
| Cl. 6.1,Table 2(Alkali content) |
- |
1950 |
|
no |
|
14 Aug, 2027 |
-
- |
| 1448 |
LPG Equipment Research Centre (LERC), Bengaluru
| 6141034
| IS 4246 (2002) |
Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision) |
- |
28320 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.24(Annexure E)(on no account the carbon monoxidel
carbon dioxide ratio of the exhaust gases of any burner.
operating at any consumption at which the burner is
stable at gas inlet pressure from 2452 kN/m2 to
3432 kN/m2 (25 gf/cm2 to 35 gf/cm2), exceed 0.02.) |
- |
0 |
|
- |
|
- |
-
- |
| 1449 |
EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD
| 8164006
| IS 723 (2023) |
Steel Countersunk Head Wire Nails � Specification ( Second Revision ) |
All |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Dimensions & tolerances (Except 120° angle)) |
- |
2500 |
|
Excluding Critical Dimensions |
| 4.2(Bend of shank) |
- |
1000 |
|
- |
| 5(General requirements (Except Concentricity of head with the shank)) |
- |
500 |
|
- |
| 6(Finish) |
- |
500 |
|
- |
| 7(Bend test) |
- |
1000 |
|
- |
| Cl.3(Carbon- Relevant parts of IS 228 or any other established chemical/instrumental method) |
- |
2000 |
|
- |
| Cl.3(Sulphur- Relevant parts of IS 228 or any other established chemical/instrumental method) |
- |
1000 |
|
- |
| Cl.3(Phosphorous- Relevant parts of IS 228 or any other established chemical/instrumental method) |
- |
1000 |
|
- |
| Cl.3(Manganese- IRelevant parts of IS 228 or any other established chemical/instrumental method) |
- |
1000 |
|
- |
| Cl.3(Silicon- Relevant parts of IS 228 or any other established chemical/instrumental method) |
- |
1000 |
|
- |
| Cl.3(Aluminium-Relevant parts of IS 228 or any other established chemical/instrumental method) |
- |
1000 |
|
- |
| Cl.3(Copper- Relevant parts of IS 228 or any other established chemical/instrumental method) |
- |
1000 |
|
- |
| Clause. 4.3(Eccentricity) |
- |
500 |
|
- |
| Clause. 4.3(ovality) |
- |
500 |
|
- |
| Cl-4(Dimensions & Tolerances-Shank Diameter) |
- |
500 |
|
- |
| Cl-4(Dimensions & Tolerances-Head Diameter) |
- |
500 |
|
- |
| Cl-4(Dimensions & Tolerances-Length) |
- |
500 |
|
- |
| Cl-4(Approximate no of nails /kg) |
- |
500 |
|
- |
| Cl-4(Eccentricity and ovality of centre of nail head from axis of shank) |
- |
500 |
|
- |
| Cl-5(Dimensions and Tolerances
Angle of Countersunk, (in°)) |
- |
500 |
|
- |
| Cl-11(Marking) |
- |
500 |
|
- |
|
27 May, 2028 |
-
- |
| 1450 |
AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI
| 7184406
| IS 14616 (1999) |
Laminated veneer lumber specification |
all |
17500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1(Dimensions) |
- |
200 |
|
- |
| 6.2(Dimensions) |
- |
200 |
|
- |
| 7(workmanship and finish) |
- |
600 |
|
- |
| 8.2.1(moisture content) |
- |
800 |
|
- |
| 8.2.2(adhesion of plies) |
- |
1500 |
|
- |
| 8.2.3, 8.2.4, Table-1(modulus of rupture) |
- |
1500 |
|
- |
| 8.2.3, 8.2.4, Table-1(modulus of elasticity) |
- |
1500 |
|
- |
| 8.2.3, 8.2.4, Table-1(compressive strength parallel to grain) |
- |
1500 |
|
- |
| 8.2.3, 8.2.4, Table-1(horizontal shear a)-parallel to grain ,b)-perpendicular to grain) |
- |
3000 |
|
- |
| 8.2.3, 8.2.4, Table-1(tensile strength parallel to grain ) |
- |
2000 |
|
- |
| 8.2.3, 8.2.4, Table-1(screw holding power a)-parallel to grain ,b)-perpendicular to grain) |
- |
2000 |
|
- |
| 8.2.3, 8.2.4, Table-1(thickness swelling in 2 hrs. water soaking) |
- |
1000 |
|
- |
| 8.2.4(swelling in wear) |
- |
1000 |
|
- |
| Clause 8.2.1(Moisture content) |
- |
800 |
|
- |
|
- |
-
Included w.e.f 09.06.2026 |
| 1451 |
AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI
| 7184406
| IS 14276 (2016) |
Cement bonded particle boards - Specification (First Revision) |
ALL |
14400 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6(Finish) |
- |
400 |
|
- |
| 7(Dimensions and Tolerances) |
- |
600 |
|
- |
| 8.5(Workability) |
- |
500 |
|
- |
| 10.3, Table-1(Test for Density) |
- |
600 |
|
- |
| 10.5, Table-1(Test for Water Absorption) |
- |
1200 |
|
- |
| 10.6, Table-1(Test for swelling in water) |
- |
2000 |
|
- |
| 10.7, Table-1(Test for modulus of Rupture) |
- |
1500 |
|
- |
| 10.8, Table-1(Test for modulus of Elasticity) |
- |
1500 |
|
- |
| 10.9, Table-1(Test for tensile strength perpendicular to Surface) |
- |
3500 |
|
- |
| 10.1, Table-1(Test for Screw Withdrawal Strength) |
- |
2000 |
|
- |
| Clause 8.2 Table 1(Moisture content) |
- |
600 |
|
- |
| 6(Finish) |
- |
0 |
|
- |
| 7(Dimensions and Tolerances) |
- |
0 |
|
- |
| 8.5(Workability) |
- |
0 |
|
- |
| 10.3, Table-1(Test for Density) |
- |
0 |
|
- |
| 10.5, Table-1(Test for Water Absorption) |
- |
0 |
|
- |
| 10.6, Table-1(Test for swelling in water) |
- |
0 |
|
- |
| 10.7, Table-1(Test for modulus of Rupture) |
- |
0 |
|
- |
| 10.8, Table-1(Test for modulus of Elasticity) |
- |
0 |
|
- |
| 10.9, Table-1(Test for tensile strength perpendicular to Surface) |
- |
0 |
|
- |
| 10.1, Table-1(Test for Screw Withdrawal Strength) |
- |
0 |
|
- |
| Clause 8.2 Table 1(Moisture content) |
- |
0 |
|
- |
| 6(Finish) |
- |
0 |
|
- |
| 7(Dimensions and Tolerances) |
- |
0 |
|
- |
| 8.5(Workability) |
- |
0 |
|
- |
| 10.3, Table-1(Test for Density) |
- |
0 |
|
- |
| 10.5, Table-1(Test for Water Absorption) |
- |
0 |
|
- |
| 10.6, Table-1(Test for swelling in water) |
- |
0 |
|
- |
| 10.7, Table-1(Test for modulus of Rupture) |
- |
0 |
|
- |
| 10.8, Table-1(Test for modulus of Elasticity) |
- |
0 |
|
- |
| 10.9, Table-1(Test for tensile strength perpendicular to Surface) |
- |
0 |
|
- |
| 10.1, Table-1(Test for Screw Withdrawal Strength) |
- |
0 |
|
- |
| Clause 8.2 Table 1(Moisture content) |
- |
0 |
|
- |
|
- |
-
Included w.e.f. 03.06.2026 |
| 1452 |
Gravitas Laboratories Private Limited, Greater Noida
| 8182606
| IS 208 (2020) |
Door Handles - Specification ( Sixth Revision ) |
ALL TYPE |
7500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10(PACKING) |
- |
0 |
|
- |
| 9.1(BIS Certification Marking) |
- |
0 |
|
- |
| 9(MARKING) |
- |
0 |
|
- |
| 6.2(Tolerance) |
- |
7500 |
|
- |
| 6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size 1. No. in each Lug 2. No. in a plate when a continious plate is used 3. Size Designation of Counter-sunk Head Wood Screws (as per IS 6760: 1972)) |
- |
7500 |
|
- |
| 6.1 Table2A & 2B and Fig 1,2,3,4(DIMENSIONS - Size (A,B,C,D,E,F,G,H,I)) |
- |
7500 |
|
- |
| 5.1(MANUFACTURE- General) |
- |
0 |
|
- |
| 3(TYPES-Doors handle shall be of the following types according to the materials used:) |
- |
0 |
|
- |
| 4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Zinc- IS 2600:1964) |
- |
0 |
|
- |
| 4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Nickel- IS 2600:1964) |
- |
0 |
|
- |
| 4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Thallium and Indium- IS 2600:1964) |
- |
0 |
|
- |
| 4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Tin- IS 2600:1964) |
- |
0 |
|
- |
| 4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981)(Chemical composition - Impurities-Cadmium- IS 2600:1964) |
- |
0 |
|
- |
| Cl.5.1(General) |
- |
0 |
|
- |
| Cl.6(Dimension) |
- |
0 |
|
- |
| Cl.7(Finish) |
- |
7500 |
|
- |
| Cl.8.2(Cossosion Test) |
- |
7500 |
|
- |
| Cl.8.3(Quench Test) |
- |
7500 |
|
- |
| Cl.9(Sampling and criterion for conformity) |
- |
0 |
|
- |
| Cl.10(Marking) |
- |
0 |
|
- |
| Cl.11(Packing) |
- |
0 |
|
- |
| Cl.8.3 (Amendment 1)(Anodizing Test) |
- |
7500 |
|
- |
|
- |
-
Included w.e.f. 10.04.2026 |
| 1453 |
Bharat Test House Pvt. Ltd. 1668 Sonipat
| 9168306
| IS 10773 (2025) |
Wrought copper tubes for refrigeration and air-conditioning purposes Specification (Second Revision) |
- |
14000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause. No.5.0(Chemical composition) |
- |
700 |
|
- |
| Clause. No.5.0(Copper + Silver) |
- |
700 |
|
- |
| Clause. No.5.0(phophrous) |
- |
700 |
|
- |
| Clause. No.5.0(Oxygen) |
- |
700 |
|
- |
| Clause no.6.0(Manufacturer) |
- |
500 |
|
- |
| Clause no.7.0(Freedom from defects) |
- |
500 |
|
- |
| Clause no.8.0(Mechnical and properties.) |
- |
2000 |
|
- |
| Clause no.9.0(Dimension and tolerance.) |
- |
500 |
|
- |
| Clause no.10(Non destructive test.) |
- |
0 |
|
- |
| Clause.no.11.0(Residue test or Cleanliness test.) |
- |
500 |
|
- |
| Clause.no.11.0(Marking) |
- |
0 |
|
- |
| Clause no.10.1(Eddy-Current Test) |
- |
500 |
|
- |
| Clause no.10.2(Hydrostatic Test) |
- |
1000 |
|
- |
| Clause no.10.3("Pneumatic Test
") |
- |
500 |
|
- |
| Clause no.10.4(Microscopic Examination) |
- |
0 |
|
- |
| Clause no.10.5(Hydrogen Embrittlement Test) |
- |
0 |
|
- |
|
- |
-
Included w.e.f. 15.06.2026 |
| 1454 |
Hindustaan Testing Solutions LLP, Ambala
| 9122136
| IS 915 (2012) |
Laboratory glassware - One - Mark volumetric flasks (Third Revision) |
All |
10600 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1(Material) |
- |
1500 |
|
Testing Charges-10600
20% discount to BIS
GSTIN as per govt rule |
| Table 1(Nominal Capacity) |
- |
1200 |
|
- |
| Table 1(Internal Neck Diameter) |
- |
600 |
|
- |
| Table 1(Distance of graduation line) |
- |
600 |
|
- |
| Table 1(Overall Height) |
- |
600 |
|
- |
| Table 1(Bulb Diameter) |
- |
500 |
|
- |
| Table 1(Base Diameter) |
- |
500 |
|
- |
| Table 1(Wall Thickness) |
- |
600 |
|
- |
| Table 1(Ground joint k4) |
- |
500 |
|
- |
| Table 1(Ground joint k6) |
- |
500 |
|
- |
| 8.3(Shape) |
- |
500 |
|
- |
| 8.4(Neck) |
- |
500 |
|
- |
| 8.5(Stopper) |
- |
500 |
|
- |
| 8.6(Dimensions) |
- |
4400 |
|
- |
| 9.0(Graduation Line) |
- |
500 |
|
- |
| Table-2(Nominal capacity) |
- |
1200 |
|
- |
| Table-2(Internal neck diameter) |
- |
600 |
|
- |
| Table-2(Distance of graduation line 1)) |
- |
600 |
|
- |
| Table-2(Overall height 2)) |
- |
600 |
|
- |
| Table-2(Bulb diameter) |
- |
500 |
|
- |
| Table-2(Base diameter) |
- |
500 |
|
- |
| Table-2(Wall thickness) |
- |
600 |
|
- |
| Table-2(Ground joint 3) k4) |
- |
500 |
|
- |
| Table-2(Ground joint 3) k6) |
- |
500 |
|
- |
| 12.1(Visibility of graduation line, figures and marking) |
- |
250 |
|
- |
| 12.2(Visibility of graduation line, figures and marking) |
- |
250 |
|
- |
| Clause. 7.0(Accuracy) |
- |
500 |
|
- |
|
12 Sep, 2028 |
-
Included w.e.f 03.06.2026 |
| 1455 |
BLUESKY LAB LLP, GHAZIABAD
| 8170306
| IS 16102 (Part 1) (2026) |
Self-Ballasted LED Lamps for General Lighting Services Part 1 Safety Requirements (First Revision) |
- |
25000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(General Requirenents and General Test Requirements) |
- |
1500 |
|
- |
| Cl-6.1(Cap Interchangeability) |
- |
2000 |
|
- |
| Cl-6.2(Bending Moment and Mass Imparted by the Lamp at the Lamp Holder) |
- |
1500 |
|
- |
| Cl-7(Protection Against Accidental Contact with live parts) |
- |
2000 |
|
- |
| Cl-8.1(Insulation resistance and electric strength) |
- |
2500 |
|
- |
| Cl-8.2(Insulation Resistance lamp) |
- |
2000 |
|
- |
| Cl-8.3(Electric Strength) |
- |
2000 |
|
- |
| Cl-9.1(Mechanical Strength Requirements) |
- |
2500 |
|
- |
| Cl-9.2.1(Torsion Resistance of Unused Lamps) |
- |
2000 |
|
- |
| Cl-9.2.2(Torsion Resistance of Lamps after a Defined Time of Usage) |
- |
2000 |
|
- |
| Cl-9.2.3(Externally Applied Axial Pull and Bending Moment) |
- |
2000 |
|
- |
| Cl-9.3(Axial Strength of Edison Caps) |
- |
2000 |
|
- |
| Cl-10(Cap Temperature Rise) |
- |
2500 |
|
- |
| Cl-11(Resistance to Heat) |
- |
2500 |
|
- |
| Cl-12(Resistance to Flame and Ignition) |
- |
2000 |
|
- |
| Cl-13.1(Fault Conditions- General Requirements) |
- |
2000 |
|
- |
| Cl-14(Creepage Distance and Clearances) |
- |
2000 |
|
- |
| Cl-15(Abnormal Operation) |
- |
2500 |
|
- |
| Cl-16(Test Conditions for Dimmable Lamps) |
- |
2000 |
|
- |
| Cl-18(Ingress Protection Requirements) |
- |
2000 |
|
- |
| Cl-19(Information for luminaire design) |
- |
2000 |
|
- |
| Cl-20.3(Accidentally Broken Lamps) |
- |
2500 |
|
- |
| Cl-5(Marking) |
- |
1500 |
|
- |
|
22 May, 2028 |
-
included w.e.f 12.06.2026
Cl-17.1 (UV Radiation)
Cl-17.2 (Blue Light Hazard) |
| 1456 |
QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED
| 5197006
| IS 5522 (2014) |
Stainless steel sheets and strips for utensils - Specification (Third Revision) |
Hot Rolled & Cold Rolled Strips, Sheets, Plates for Utensil of Grade 304, 302, 430 |
8500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| 8.2, Table 3(Tensile Test-1608:Part 1) |
- |
1000 |
|
- |
| 8.2, Table 3(Proof Stress, N/mm2) |
- |
1000 |
|
- |
| 8.2, Table 3(Elongation, %) |
- |
1000 |
|
- |
| 8.2, Table 3(Tensile Strength, N/mm2) |
- |
1000 |
|
- |
| 8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586) |
- |
1000 |
|
- |
| 8.4(Bend Test) |
- |
500 |
|
- |
| 8.5(Erichsen Cupping Test) |
- |
1000 |
|
- |
| 10.1(Thickness, mm) |
- |
200 |
|
- |
| 10.2(width, mm) |
- |
200 |
|
- |
| 10.3(Length, mm) |
- |
200 |
|
- |
| 10.4(Flatness,mm) |
- |
200 |
|
- |
| 10.5(Camber, mm) |
- |
200 |
|
- |
| 11(Surface Finish) |
- |
200 |
|
- |
| Cl . 6 .0(Freedom from defect) |
- |
200 |
|
- |
| 13(Marking) |
- |
200 |
|
- |
|
- |
-
Included w.e.f. 02.03.2026 |
| 1457 |
TEKNOLAB QUALITY SERVICES PRIVATE LIMITED
| 8196926
| IS 302 : Part 2 : Sec 13 (2024) |
Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 13 Deep Fat Fryers, Frying Pans and Similar Appliances (First Revision) |
- |
70000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Marking and instructions) |
- |
3000 |
|
- |
| 8(Protection against access to live parts) |
- |
3000 |
|
- |
| 10(Power input and current) |
- |
5000 |
|
- |
| 11(Heating) |
- |
10000 |
|
- |
| 13.1 &13.2(Leakage current test) |
- |
3000 |
|
- |
| 13.1 &13.3(Electric strength test) |
- |
3000 |
|
- |
| 14(Transient overvoltages) |
- |
3000 |
|
- |
| 15(Moisture resistance) |
- |
5000 |
|
- |
| 15.3(Moisture resistance) |
- |
5000 |
|
- |
| 15.101(Moisture resistance) |
- |
2000 |
|
- |
| 16.1 &16.2(Leakage current test) |
- |
3000 |
|
- |
| 16.1 & 16.3(Electric strength test) |
- |
3000 |
|
- |
| 17(Overload protection of transformers and associated circuits) |
- |
3000 |
|
- |
| 19.1 to 19.13, Table No. - 9(Abnormal operation) |
- |
5000 |
|
- |
| 19.101 to to 19.102(Abnormal operation) |
- |
3000 |
|
- |
| 20(Stability and mechanical hazards) |
- |
3000 |
|
- |
| 21(Mechanical strength) |
- |
3000 |
|
- |
| 22(Construction) |
- |
5000 |
|
- |
| 22.101(Construction) |
- |
3000 |
|
- |
| 23(Internal wiring) |
- |
3000 |
|
- |
| 24(Components) |
- |
5000 |
|
- |
| 25("Supply connection and
external flexible cords") |
- |
5000 |
|
- |
| 26("Terminals for external
conductors") |
- |
5000 |
|
- |
| 27(Provision for earthing) |
- |
3000 |
|
- |
| 31(Resistance to rusting) |
- |
3000 |
|
- |
| 32("Radiation, toxicity and similar
hazards") |
- |
2000 |
|
- |
| 28(Screws and connections) |
- |
2000 |
|
- |
| 29("Clearances, creepage
distances and solid insulation") |
- |
3000 |
|
- |
| 30(Resistance to heat and fire) |
- |
15000 |
|
- |
|
- |
-
Included w.e.f-18.06.2026
"Cl.19.11.4.1 (Electrostatic discharges)
Cl.19.11.4.2 (Radiated fields)
Cl.19.11.4.3 (Fast transient bursts)
Cl.19.11.4.4 (Voltage surges)
Cl.19.11.4.5 (Injected currents)
Cl.19.11.4.6 (Class 3 voltage dips and interruptions)
Cl.19.11.4.7 (mains signals)" |
| 1458 |
QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED
| 5197006
| IS 5082 (1998) |
Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications (Second Revision) |
Wrought Aluminium & Aluminium Alloy Bars, Rods, Tubes, Sections, Plates & Sheets of Grade 19501 & 63401 |
14500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1(CHEMICAL COMPOSITION Table 1) |
- |
2500 |
|
- |
| Clause 5(FREEDOM FROM DEFECTS) |
- |
200 |
|
- |
| 8.1(MECHANICAL TEST
Tensile Strength Min, Mpa) |
- |
750 |
|
- |
| 8.1(MECHANICAL TEST
(0.2 Percent Proof Stress Min, Mpa)) |
- |
750 |
|
- |
| 8.1(Percent Elongation on 5.65 Min) |
- |
750 |
|
- |
| 8.2(Bend Test) |
- |
750 |
|
- |
| Clause 10(DIMENSIONAL TOLERANCES) |
- |
1000 |
|
- |
| 6.1, Table 1(Aluminium) |
- |
500 |
|
- |
| 6.1, Table 1(Copper) |
- |
500 |
|
- |
| 6.1, Table 1(Magnesium) |
- |
500 |
|
- |
| 6.1, Table 1(Silicon) |
- |
500 |
|
- |
| 6.1, Table 1(Manganese) |
- |
500 |
|
- |
| 6.1, Table 1(Zinc) |
- |
500 |
|
- |
| 6.1, Table 1(Titanium) |
- |
500 |
|
- |
| 6.1, Table 1(Chromium) |
- |
500 |
|
- |
| 6.1, Table 1(Iron) |
- |
500 |
|
- |
| 6.1, Table 1(Vanadium) |
- |
500 |
|
- |
| 8.1(Electrical Conductivity at 20°C,Min) |
- |
1500 |
|
- |
| 8.1(Maximum Electrical Resistivity at 20°C ohm-mm/mm2) |
- |
1500 |
|
- |
| 6.1(CHEMICAL COMPOSITION Table 1) |
- |
2500 |
|
- |
| Clause 5(FREEDOM FROM DEFECTS) |
- |
500 |
|
- |
| 8.1(MECHANICAL TEST
Tensile Strength Min, Mpa) |
- |
750 |
|
- |
| 8.1(MECHANICAL TEST
(0.2 Percent Proof Stress Min, Mpa)) |
- |
750 |
|
- |
| 8.1(Percent Elongation on 5.65 Min) |
- |
750 |
|
- |
| 8.2(Bend Test) |
- |
750 |
|
- |
| Clause 10(DIMENSIONAL TOLERANCES) |
- |
1000 |
|
- |
| 6.1, Table 1(Aluminium) |
- |
500 |
|
- |
| 6.1, Table 1(Copper) |
- |
500 |
|
- |
| 6.1, Table 1(Magnesium) |
- |
500 |
|
- |
| 6.1, Table 1(Silicon) |
- |
500 |
|
- |
| 6.1, Table 1(Manganese) |
- |
500 |
|
- |
| 6.1, Table 1(Zinc) |
- |
500 |
|
- |
| 6.1, Table 1(Titanium) |
- |
500 |
|
- |
| 6.1, Table 1(Chromium) |
- |
500 |
|
- |
| 6.1, Table 1(Iron) |
- |
500 |
|
- |
| 6.1, Table 1(Vanadium) |
- |
500 |
|
- |
| 8.1(Electrical Conductivity at 20°C,Min) |
- |
500 |
|
- |
| 8.1(Maximum Electrical Resistivity at 20°C ohm-mm/mm2) |
- |
500 |
|
- |
|
- |
-
Included w.e.f. 02.03.2026 |
| 1459 |
Ace Test Labs & Metrology Pvt. Ltd., Sonipat
| 9162826
| IS 16102 (Part 1) (2026) |
Self-Ballasted LED Lamps for General Lighting Services Part 1 Safety Requirements (First Revision) |
- |
51000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(General Requirenents and General Test Requirements) |
- |
3000 |
|
- |
| Cl-6.1(Cap Interchangeability) |
- |
5000 |
|
- |
| Cl-6.2(Bending Moment and Mass Imparted by the Lamp at the Lamp Holder) |
- |
5000 |
|
- |
| Cl-7(Protection Against Accidental Contact with live parts) |
- |
5000 |
|
- |
| Cl-8.1(Insulation resistance and electric strength) |
- |
10000 |
|
- |
| Cl-8.2(Insulation Resistance lamp) |
- |
10000 |
|
- |
| Cl-8.3(Electric Strength) |
- |
10000 |
|
- |
| Cl-9.1(Mechanical Strength Requirements) |
- |
5000 |
|
- |
| Cl-9.2.1(Torsion Resistance of Unused Lamps) |
- |
5000 |
|
- |
| Cl-9.2.2(Torsion Resistance of Lamps after a Defined Time of Usage) |
- |
5000 |
|
- |
| Cl-9.2.3(Externally Applied Axial Pull and Bending Moment) |
- |
5000 |
|
- |
| Cl-9.3(Axial Strength of Edison Caps) |
- |
5000 |
|
- |
| Cl-10(Cap Temperature Rise) |
- |
8000 |
|
- |
| Cl-11(Resistance to Heat) |
- |
8000 |
|
- |
| Cl-12(Resistance to Flame and Ignition) |
- |
8000 |
|
- |
| Cl-13.1(Fault Conditions- General Requirements) |
- |
10000 |
|
- |
| Cl-14(Creepage Distance and Clearances) |
- |
5000 |
|
- |
| Cl-15(Abnormal Operation) |
- |
10000 |
|
- |
| Cl-16(Test Conditions for Dimmable Lamps) |
- |
5000 |
|
- |
| Cl-17.1(UV Radiation) |
- |
5000 |
|
- |
| Cl-17.2(Blue Light Hazard) |
- |
5000 |
|
- |
| Cl-18(Ingress Protection Requirements) |
- |
5000 |
|
- |
| Cl-19(Information for luminaire design) |
- |
3000 |
|
- |
| Cl-20.3(Accidentally Broken Lamps) |
- |
3000 |
|
- |
| Cl-5(Marking) |
- |
5000 |
|
- |
| Cl-4(General Requirenents and General Test Requirements) |
- |
3000 |
|
- |
| Cl-6.1(Cap Interchangeability) |
- |
5000 |
|
- |
| Cl-6.2(Bending Moment and Mass Imparted by the Lamp at the Lamp Holder) |
- |
5000 |
|
- |
| Cl-7(Protection Against Accidental Contact with live parts) |
- |
5000 |
|
- |
| Cl-8.1(Insulation resistance and electric strength) |
- |
10000 |
|
- |
| Cl-8.2(Insulation Resistance lamp) |
- |
10000 |
|
- |
| Cl-8.3(Electric Strength) |
- |
10000 |
|
- |
| Cl-9.1(Mechanical Strength Requirements) |
- |
4999.99 |
|
- |
| Cl-9.2.1(Torsion Resistance of Unused Lamps) |
- |
5000 |
|
- |
| Cl-9.2.2(Torsion Resistance of Lamps after a Defined Time of Usage) |
- |
5000 |
|
- |
| Cl-9.2.3(Externally Applied Axial Pull and Bending Moment) |
- |
5000 |
|
- |
| Cl-9.3(Axial Strength of Edison Caps) |
- |
5000 |
|
- |
| Cl-10(Cap Temperature Rise) |
- |
8000 |
|
- |
| Cl-11(Resistance to Heat) |
- |
8000 |
|
- |
| Cl-12(Resistance to Flame and Ignition) |
- |
8000 |
|
- |
| Cl-13.1(Fault Conditions- General Requirements) |
- |
10000 |
|
- |
| Cl-14(Creepage Distance and Clearances) |
- |
5000 |
|
- |
| Cl-15(Abnormal Operation) |
- |
10000 |
|
- |
| Cl-16(Test Conditions for Dimmable Lamps) |
- |
4999.99 |
|
- |
| Cl-18(Ingress Protection Requirements) |
- |
5000 |
|
- |
| Cl-19(Information for luminaire design) |
- |
3000 |
|
- |
| Cl-20.3(Accidentally Broken Lamps) |
- |
3000 |
|
- |
| Cl-5(Marking) |
- |
5000 |
|
- |
|
14 Nov, 2027 |
-
Included w.e.f. 09.06.2026
Exclusion: "Cl-17.1 (UV Radiation)
Cl-17.2 (Blue Light Hazard)" |
| 1460 |
AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI
| 7184406
| IS 15786 (2008) |
Prelaminated cement bonded particle board - Specification |
ALL |
32900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 10.3 (Moisture content) |
- |
600 |
|
IS 15786 physical tests-15500, Raw material cl. 5.2, 5.3, 5.4-3000, IS 14276 as per clause 5.1-14400 ) |
| 5.1(Cement Bonded Particle Board) |
- |
14400 |
|
- |
| 5.2(Impregnated Base Paper) |
- |
1000 |
|
- |
| 5.4(Finished Foil) |
- |
0 |
|
- |
| 6(Manufacture) |
- |
0 |
|
- |
| 7(Finish) |
- |
0 |
|
- |
| 8(DIMENSIONS AND TOLERANCES) |
- |
600 |
|
- |
| 10.2(Test for Density) |
- |
600 |
|
- |
| 10.4(Test for Water Absorption) |
- |
1200 |
|
- |
| 10.5(Test for Swelling in Water) |
- |
1000 |
|
- |
| 10.6(Test for Modulus of Elasticity and Modulus of Rupture) |
- |
1000 |
|
- |
| 10.7(Test for Tensile Strength Perpendicular to Surface) |
- |
1000 |
|
- |
| 10.8(Test for Tensile Strength Perpendicular to Surface After Ageing) |
- |
3000 |
|
- |
| 10.9(Test for Screw Withdrawal Strength) |
- |
2000 |
|
- |
| 10.10(Test for Abrasion Resistance) |
- |
1500 |
|
- |
| 10.11(Test for Resistance to Steam) |
- |
600 |
|
- |
| 10.12(Test for Resistance to Crack) |
- |
600 |
|
- |
| 10.13(Test for Resistance to Cigarette Bum) |
- |
600 |
|
- |
| 10.14(Test for Resistance to Stain) |
- |
600 |
|
- |
| 11(Marking) |
- |
0 |
|
- |
| 5.3(Impregnated OverlaylUnderIay) |
- |
1000 |
|
Complete Testing Charges IS-32900 (For IS 15786 physical tests-15500, Raw material cl. 5.2, 5.3, 5.4-3000, IS 14276 as per clause 5.1-14400 ) |
|
- |
-
Included w.e.f 01.04.2026 |
| 1461 |
Classic Instrumentation Pvt. Ltd. (8135126), Noida
| 8135126
| IS 10322 (Part 5/Sec 3) (2026) |
Luminaires Part 5: Particular requirements Section 3: Luminaires for road and street lighting (Second Revision) |
- |
45000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-3.2(General test requirements) |
- |
2000 |
|
- |
| Cl-3.5(Marking) |
- |
3000 |
|
- |
| Cl-3.6.1(All luminaires) |
- |
7000 |
|
- |
| Cl-3.6.2(Luminaires for suspension on span wires) |
- |
3000 |
|
- |
| Cl-3.6.3(Luminaire or external part) |
- |
5000 |
|
- |
| Cl-3.6.4(Lampholders or optical part) |
- |
2000 |
|
- |
| Cl-3.6.5(Breaking glass (glass covers)) |
- |
4000 |
|
- |
| Cl-3.6.5.2.1(high mechanical strength) |
- |
4000 |
|
- |
| Cl-3.7(Creepage distances and clearances) |
- |
3000 |
|
- |
| Cl-3.8(Provision for earthing) |
- |
4000 |
|
- |
| Cl-3.8.1(Fixed part of the terminal) |
- |
3000 |
|
- |
| Cl-3.9(Terminals) |
- |
3000 |
|
- |
| Cl-3.10(External and internal wiring) |
- |
4000 |
|
- |
| Cl-3.10.1(Road and street lighting) |
- |
4000 |
|
- |
| Cl-3.11(Protection against electric shock) |
- |
5000 |
|
- |
| Cl-3.12(Endurance tests and thermal tests) |
- |
15000 |
|
- |
| Cl-3.13(Resistance to dust and moisture) |
- |
8000 |
|
- |
| Cl-3.14(Insulation resistance and electric strength) |
- |
10000 |
|
- |
| Cl-3.15(Resistance to heat, fire and tracking) |
- |
7000 |
|
- |
| Cl-3.15(Resistance to heat, fire and tracking) |
- |
7000 |
|
- |
| Cl-3.15(Resistance to heat, fire and tracking) |
- |
7000 |
|
- |
| Cl-3.15(Resistance to heat, fire and tracking) |
- |
7000 |
|
- |
|
23 Oct, 2028 |
-
Included w.e.f 09.06.2026
Cl-3.6.1 (All luminaires)
Photobiological Hazard |
| 1462 |
AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI
| 7184406
| IS 15380 (2023) |
MOULDED HIGH DENSITY FIBRE HDF PANELLED DOOR SHUTTERS - SPECIFICATION ( First Revision ) |
all |
25500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5.1(Sized) |
- |
0 |
|
EXTRA CHARGE FOR RAW MATERIAL TESTING 5000/- |
| Cl-6.1.2(Moisture content in timbers) |
- |
0 |
|
- |
| Cl-6.2 S.No (1), i(Density, kg/m3 , Min) |
- |
1000 |
|
- |
| Cl-6.2 S.No (1), ii(Moisture content, percent, Max) |
- |
1000 |
|
- |
| Cl-6.2 S.No (1), iii(Water absorption, percent, Max) |
- |
2000 |
|
- |
| Cl-6.2 S.No (1), iv(Swelling in water, percent, Max) |
- |
2000 |
|
- |
| Cl-6.2 S.No (1), v(Modulus of rupture, N/mm2 , Min) |
- |
1500 |
|
RS 1500/- |
| Cl-6.2 S.No (1), vi(Internal bond strength, N/mm2 , Min) |
- |
2000.01 |
|
- |
| Cl-6.2 S.No (1), vii(Immersion in boiling water at (100 ± 3) °C for 4 h) |
- |
2000 |
|
- |
| Cl-6.2 S.No (1), viii(Formaldehyde emission, mg/100 g, Max) |
- |
3000 |
|
FORMALDEHYDE CONTENT TEST -RS 3000/- |
| Cl- 6.3(Particle Boards as Core) |
- |
0 |
|
- |
| Cl- 6.4(Adhesive) |
- |
0 |
|
EXTRA |
| Cl- 6.5(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), Medium Density Fibre (MDF)) |
- |
0 |
|
- |
| Cl-11.1(Dimensions and Squareness Test) |
- |
1000 |
|
11.1(Dimensions - Height) - 200
11.1(Dimensions - Width) - 200
11.1(Dimensions - Thickness) - 200
11.1(Dimensions - Variation in thickness) - 200
11.1(Dimensions - Squareness) - 200 |
| Cl-11.2(General Flatness Test) |
- |
900 |
|
- |
| Cl-11.3(Local Planeness Test) |
- |
1000 |
|
- |
| Cl-11.4(Impact Indentation Test) |
- |
999.99 |
|
1000 RS |
| Cl-11.5(Flexure Test) |
- |
2000 |
|
- |
| Cl-11.6(Edge Loading Test) |
- |
1500 |
|
- |
| Cl-11.7(Shock Resistance Test) |
- |
2000 |
|
- |
| Cl-11.8(Buckling Resistance Test) |
- |
1500 |
|
- |
| Cl-11.9(Slamming Test) |
- |
1500 |
|
- |
| Cl-11.10(Misuse Test) |
- |
800 |
|
- |
| Cl-11.11(Varying Humidity Test) |
- |
4000 |
|
- |
| Cl-11.12(End Immersion Test) |
- |
3000 |
|
- |
| Cl-11.13(Glue Adhesion Test) |
- |
1000 |
|
- |
| Cl-11.14(Screw Withdrawal Resistance Test) |
- |
3500 |
|
- |
| Cl-12.2(Sample Size) |
- |
0 |
|
- |
| Cl-14(Marking) |
- |
0 |
|
- |
| Cl-6.1.1(Bulk density of timber) |
- |
0 |
|
- |
| Cl-9(Workmanship and finish) |
- |
199.99 |
|
- |
| Cl-5.1(Sized) |
- |
0 |
|
- |
| Cl-6.1.2(Moisture content in timbers) |
- |
0 |
|
- |
| Cl-6.2 S.No (1), i(Density, kg/m3 , Min) |
- |
0 |
|
- |
| Cl-6.2 S.No (1), ii(Moisture content, percent, Max) |
- |
0 |
|
- |
| Cl-6.2 S.No (1), iii(Water absorption, percent, Max) |
- |
0 |
|
- |
| Cl-6.2 S.No (1), iv(Swelling in water, percent, Max) |
- |
0 |
|
- |
| Cl-6.2 S.No (1), v(Modulus of rupture, N/mm2 , Min) |
- |
0 |
|
- |
| Cl-6.2 S.No (1), vi(Internal bond strength, N/mm2 , Min) |
- |
0 |
|
- |
| Cl-6.2 S.No (1), vii(Immersion in boiling water at (100 ± 3) °C for 4 h) |
- |
0 |
|
- |
| Cl-6.2 S.No (1), viii(Formaldehyde emission, mg/100 g, Max) |
- |
0 |
|
- |
| Cl- 6.3(Particle Boards as Core) |
- |
0 |
|
- |
| Cl- 6.4(Adhesive) |
- |
0 |
|
- |
| Cl- 6.5(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), Medium Density Fibre (MDF)) |
- |
0 |
|
- |
| Cl-11.1(Dimensions and Squareness Test) |
- |
0 |
|
- |
| Cl-11.2(General Flatness Test) |
- |
0 |
|
- |
| Cl-11.3(Local Planeness Test) |
- |
0 |
|
- |
| Cl-11.4(Impact Indentation Test) |
- |
0 |
|
- |
| Cl-11.5(Flexure Test) |
- |
0 |
|
- |
| Cl-11.6(Edge Loading Test) |
- |
0 |
|
- |
| Cl-11.7(Shock Resistance Test) |
- |
0 |
|
- |
| Cl-11.8(Buckling Resistance Test) |
- |
0 |
|
- |
| Cl-11.9(Slamming Test) |
- |
0 |
|
- |
| Cl-11.10(Misuse Test) |
- |
0 |
|
- |
| Cl-11.11(Varying Humidity Test) |
- |
0 |
|
- |
| Cl-11.12(End Immersion Test) |
- |
0 |
|
- |
| Cl-11.13(Glue Adhesion Test) |
- |
0 |
|
- |
| Cl-11.14(Screw Withdrawal Resistance Test) |
- |
0 |
|
- |
| Cl-12.2(Sample Size) |
- |
0 |
|
- |
| Cl-14(Marking) |
- |
0 |
|
- |
| Cl-6.1.1(Bulk density of timber) |
- |
0 |
|
- |
| Cl-9(Workmanship and finish) |
- |
0 |
|
- |
|
- |
-
Included w.e.f 05.08.2026 |
| 1463 |
Classic Instrumentation Pvt. Ltd. (8135126), Noida
| 8135126
| IS 16102 (Part 1) (2026) |
Self-Ballasted LED Lamps for General Lighting Services Part 1 Safety Requirements (First Revision) |
- |
65000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(General Requirenents and General Test Requirements) |
- |
2500 |
|
- |
| Cl-6.1(Cap Interchangeability) |
- |
8000 |
|
- |
| Cl-6.2(Bending Moment and Mass Imparted by the Lamp at the Lamp Holder) |
- |
8000 |
|
- |
| Cl-7(Protection Against Accidental Contact with live parts) |
- |
5000 |
|
- |
| Cl-8.1(Insulation resistance and electric strength) |
- |
5000 |
|
- |
| Cl-8.2(Insulation Resistance lamp) |
- |
5000 |
|
- |
| Cl-8.3(Electric Strength) |
- |
5000 |
|
- |
| Cl-9.1(Mechanical Strength Requirements) |
- |
8000 |
|
- |
| Cl-9.2.1(Torsion Resistance of Unused Lamps) |
- |
5000 |
|
- |
| Cl-9.2.2(Torsion Resistance of Lamps after a Defined Time of Usage) |
- |
5000 |
|
- |
| Cl-9.2.3(Externally Applied Axial Pull and Bending Moment) |
- |
5000 |
|
- |
| Cl-9.3(Axial Strength of Edison Caps) |
- |
5000 |
|
- |
| Cl-10(Cap Temperature Rise) |
- |
15000 |
|
- |
| Cl-11(Resistance to Heat) |
- |
5000 |
|
- |
| Cl-12(Resistance to Flame and Ignition) |
- |
8000 |
|
- |
| Cl-13.1(Fault Conditions- General Requirements) |
- |
8000 |
|
- |
| Cl-14(Creepage Distance and Clearances) |
- |
2500 |
|
- |
| Cl-15(Abnormal Operation) |
- |
7000 |
|
- |
| Cl-16(Test Conditions for Dimmable Lamps) |
- |
5000 |
|
- |
| Cl-17.1(UV Radiation) |
- |
5000 |
|
- |
| Cl-17.2(Blue Light Hazard) |
- |
5000 |
|
- |
| Cl-18(Ingress Protection Requirements) |
- |
6000 |
|
- |
| Cl-19(Information for luminaire design) |
- |
2500 |
|
- |
| Cl-20.3(Accidentally Broken Lamps) |
- |
2500 |
|
- |
| Cl-5(Marking) |
- |
2500 |
|
- |
|
23 Oct, 2028 |
-
included w.e.f 03.08.2026 |
| 1464 |
AJEO TESTING LABS PVT LTD, GHAZIABAD
| 8178606
| IS 15909 (2020) |
PVC Geomembranes for Lining - Specification ( Second Revision ) |
Category-B |
72900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.0(Types) |
- |
100 |
|
10% DISCOUNT ON BIS SAMPLE |
| 6.0(Dimensions and tolerances) |
- |
1000 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Length) |
- |
400 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Width) |
- |
400 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Thickness at 20kPa pressure) |
- |
800 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Tensile Strength (Longitudinal)) |
- |
1500 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Tensile Strength (Transverse)) |
- |
1500 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Elongation at break (Longitudinal)) |
- |
500 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Elongation at break (Transverse)) |
- |
500 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Tear Strength (Machine direction)) |
- |
1000 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Tear Strength (Cross direction)) |
- |
1000 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Behaviour during perforation) |
- |
3000 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Height of fall without perforation) |
- |
3000 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Cold crack resistance at low temperature) |
- |
3000 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Hydrostatic Pressure Resistance) |
- |
5000 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Dimensional Stability at 80 degree C) |
- |
2000 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Change in length after heating) |
- |
1100 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Change in width after heating) |
- |
1100 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Resistance to acid and alkali) |
- |
15000 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Strength of welded seam shear resistance) |
- |
3000 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Resistance to static puncturing) |
- |
5000 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Horizontal rate of burning) |
- |
10000 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5, Table-2(Vertical rate of burning) |
- |
10000 |
|
10% DISCOUNT ON BIS SAMPLE |
| 7.0(Colour ,Surface characteristics and fredom from defects) |
- |
500 |
|
10% DISCOUNT ON BIS SAMPLE |
| 7.1(Colour ,Surface characteristics and fredom from defects) |
- |
500 |
|
10% DISCOUNT ON BIS SAMPLE |
| 7.2(Colour ,Surface characteristics and fredom from defects) |
- |
500 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5,Table 2(Specific Gravity) |
- |
1500 |
|
10% DISCOUNT ON BIS SAMPLE |
| 5,Table 2(Specific Gravity) |
- |
0 |
|
- |
|
- |
-
Included w.e.f 06.07.2026
Exclusion: Cl 5,Table 1 |
| 1465 |
Stellar Test House, Noida
| 8171606
| IS 302 : PART 1 (Commercial Electric Rinsing Sinks) |
Commercial Electric Rinsing Sinks |
- |
30000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6(Classifications) |
- |
500 |
|
- |
| 6(Classifications) |
- |
500 |
|
- |
| 5(General conditions for tests) |
- |
500 |
|
- |
| 4(General Requirement) |
- |
500 |
|
- |
| 11.8(Temperature rise) |
- |
1000 |
|
- |
| 11.7(Duration corresponding) |
- |
1000 |
|
- |
| 11.6(Combined appliances) |
- |
1000 |
|
- |
| 11.5(Motor-operated appliances) |
- |
1000 |
|
- |
| 11.4(Heating appliances) |
- |
1000 |
|
- |
| 8.1.5(Live parts of built-in appliances) |
- |
1000 |
|
- |
| 18(Endurance) |
- |
1000 |
|
- |
| 17(Overload protection of transformers and associated circuits) |
- |
1000 |
|
- |
| 16(Leakage current and electric strength) |
- |
1000 |
|
- |
| 4(General requirement) |
- |
500 |
|
- |
| 32(Radiation Toxicity and Similar Hazards) |
- |
1000 |
|
- |
| 31(Resistance to Rusting) |
- |
1000 |
|
- |
| 30.2(Needle Flame Test) |
- |
1000 |
|
- |
| 30.2(Glow Wire Test) |
- |
1000 |
|
- |
| 30.1(Ball pressure test) |
- |
1000 |
|
- |
| 29(clearance, creepage distances and solid insulation) |
- |
1000 |
|
- |
| 28(Screw test and connections) |
- |
1000 |
|
- |
| 27(Provision for earthing) |
- |
1000 |
|
- |
| 26(Terminals for external conductors) |
- |
1000 |
|
- |
| 25(Supply connection and external flexible cords) |
- |
1000 |
|
- |
| 24(Components) |
- |
1000 |
|
- |
| 23(General) |
- |
1000 |
|
- |
| 22(Construction verification related test) |
- |
1000 |
|
- |
| 21(Mechanical Strength Test) |
- |
1000 |
|
- |
| 20(Stability test) |
- |
1000 |
|
- |
| 19(Abnormal Operation) |
- |
1000 |
|
- |
| 18(Endurance Test requirements and tests) |
- |
1000 |
|
- |
| 17(Over Load Protection of Transformers and associated circuits) |
- |
1000 |
|
- |
| 16.3(Electric Strength (after clause 15 and 16.2)) |
- |
1000 |
|
- |
| 16.2(Leakage Current (after Clause 15)) |
- |
1000 |
|
- |
| 16.1(General) |
- |
1000 |
|
- |
| 16.0(General) |
- |
1000 |
|
- |
| 15.3(Humidity Test) |
- |
1000 |
|
- |
| 15.2(Spillage Test) |
- |
1000 |
|
- |
| 15.1(Ingress Protection test other than IPX0 (IP test)) |
- |
1000 |
|
- |
| 15.0(General) |
- |
1000 |
|
- |
| 14(Transient Over Voltages) |
- |
1000 |
|
- |
| 13.2(Leakage current at operating temperature) |
- |
1000 |
|
- |
| 13.1(General) |
- |
1000 |
|
- |
| 11.3(Heating) |
- |
1000 |
|
- |
| 11.2(General) |
- |
1000 |
|
- |
| 11.1(General) |
- |
1000 |
|
- |
| 10.2(Current input) |
- |
1000 |
|
- |
| 10.1(Power input) |
- |
1000 |
|
- |
| 9(Starting of motor operation test requirements and tests) |
- |
1000 |
|
- |
| 8.1.4(Protection against live parts against protective impedance) |
- |
1000 |
|
- |
| 8.1.3(Protection against live parts in visible glowing heating elements) |
- |
1000 |
|
- |
| 8.1.2(Protection against live parts in openings) |
- |
1000 |
|
- |
| 8.1.1(Protection against live parts in all positions) |
- |
1000 |
|
- |
| 7(Marking and instructions) |
- |
500 |
|
- |
| 13.3(Electric Strength at operating temperature) |
- |
1000 |
|
- |
|
26 Sep, 2028 |
-
1 19.11.4.7 (Harmonics) EMI/EMC Test Test facilities not available
2 19.11.4.6 (Class 3 Voltage dips and interruptions) EMI/EMC Test Test facilities not available
3 19.11.4.5 (Immunity to conducted discharges) EMI/EMC Test Test facilities not available
4 19.11.4.4 (Surge immunity test) EMI/EMC Test Test facilities not available
5 19.11.4.3 (Fast transient bursts) EMI/EMC Test Test facilities not available
6 19.11.4.2 (Radiated fields) EMI/EMC Test Test facilities not available
7 19.11.4.1 (Electrostatic discharges) EMI/EMC Test Test facilities not available. |
| 1466 |
Stellar Test House, Noida
| 8171606
| IS 302 : PART 1 (Commercial Electric Multi-purpose Cooking Pans) |
Commercial Electric Multi-purpose Cooking Pans |
- |
30000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6(Classifications) |
- |
500 |
|
- |
| 5(General conditions for tests) |
- |
500 |
|
- |
| 4(General Requirement) |
- |
500 |
|
- |
| 11.8(Temperature rise) |
- |
1000 |
|
- |
| 11.7(Duration corresponding) |
- |
1000 |
|
- |
| 11.6(Combined appliances) |
- |
1000 |
|
- |
| 11.5(Motor-operated appliances) |
- |
1000 |
|
- |
| 11.4(Heating appliances) |
- |
1000 |
|
- |
| 8.1.5(Live parts of built-in appliances) |
- |
1000 |
|
- |
| 18(Endurance) |
- |
1000 |
|
- |
| 17(Overload protection of transformers and associated circuits) |
- |
1000 |
|
- |
| 16(Leakage current and electric strength) |
- |
1000 |
|
- |
| 4(General requirement) |
- |
500 |
|
- |
| 32(Radiation Toxicity and Similar Hazards) |
- |
1000 |
|
- |
| 31(Resistance to Rusting) |
- |
1000 |
|
- |
| 30.2(Needle Flame Test) |
- |
1000 |
|
- |
| 30.2(Glow Wire Test) |
- |
1000 |
|
- |
| 30.1(Ball pressure test) |
- |
1000 |
|
- |
| 29(clearance, creepage distances and solid insulation) |
- |
1000 |
|
- |
| 28(Screw test and connections) |
- |
1000 |
|
- |
| 27(Provision for earthing) |
- |
1000 |
|
- |
| 26(Terminals for external conductors) |
- |
1000 |
|
- |
| 25(Supply connection and external flexible cords) |
- |
1000 |
|
- |
| 24(Components) |
- |
1000 |
|
- |
| 23(General) |
- |
1000 |
|
- |
| 22(Construction verification related test) |
- |
1000 |
|
- |
| 21(Mechanical Strength Test) |
- |
1000 |
|
- |
| 20(Stability test) |
- |
1000 |
|
- |
| 19(Abnormal Operation) |
- |
1000 |
|
- |
| 18(Endurance Test requirements and tests) |
- |
1000 |
|
- |
| 17(Over Load Protection of Transformers and associated circuits) |
- |
1000 |
|
- |
| 16.3(Electric Strength (after clause 15 and 16.2)) |
- |
1000 |
|
- |
| 16.2(Leakage Current (after Clause 15)) |
- |
1000 |
|
- |
| 16.1(General) |
- |
1000 |
|
- |
| 16.0(General) |
- |
1000 |
|
- |
| 15.3(Humidity Test) |
- |
1000 |
|
- |
| 15.2(Spillage Test) |
- |
1000 |
|
- |
| 15.1(Ingress Protection test other than IPX0 (IP test)) |
- |
1000 |
|
- |
| 15.0(General) |
- |
1000 |
|
- |
| 14(Transient Over Voltages) |
- |
1000 |
|
- |
| 13.3(Electric Strength at operating temperature) |
- |
1000 |
|
- |
| 13.2(Leakage current at operating temperature) |
- |
1000 |
|
- |
| 13.1(General) |
- |
1000 |
|
- |
| 11.3(Heating) |
- |
1000 |
|
- |
| 11.2(General) |
- |
1000 |
|
- |
| 11.1(General) |
- |
1000 |
|
- |
| 10.2(Current input) |
- |
1000 |
|
- |
| 10.1(Power input) |
- |
1000 |
|
- |
| 8.1.4(Protection against live parts against protective impedance) |
- |
1000 |
|
- |
| 8.1.3(Protection against live parts in visible glowing heating elements) |
- |
1000 |
|
- |
| 8.1.1(Protection against live parts in all positions) |
- |
1000 |
|
- |
| 7(Marking and instructions) |
- |
500 |
|
- |
| 9(Starting of motor operation test requirements and tests) |
- |
1000 |
|
- |
| 8.1.2(Protection against live parts in openings) |
- |
1000 |
|
- |
|
26 Sep, 2028 |
-
1 19.11.4.7 (Harmonics) EMI/EMC Test Test facilities not available
2 19.11.4.6 (Class 3 Voltage dips and interruptions) EMI/EMC Test Test facilities not available
3 19.11.4.5 (Immunity to conducted discharges) EMI/EMC Test Test facilities not available
4 19.11.4.4 (Surge immunity test) EMI/EMC Test Test facilities not available
5 19.11.4.3 (Fast transient bursts) EMI/EMC Test Test facilities not available
6 19.11.4.2 (Radiated fields) EMI/EMC Test Test facilities not available
7 19.11.4.1 (Electrostatic discharges) EMI/EMC Test Test facilities not available. |
| 1467 |
AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI
| 7184406
| IS 19267 (2025) |
Oriented Strand Boards � Specification |
all |
19500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5.1(Wood) |
- |
0 |
|
- |
| Cl-5.2(Adhesives) |
- |
0 |
|
EXTRA |
| Cl-5.3(Preservative) |
- |
0 |
|
EXTRA |
| Cl-7(Finish) |
- |
500 |
|
- |
| Cl-8.1(Any dimensions (length and width)) |
- |
1000 |
|
- |
| Cl-8.2(Thickness) |
- |
500 |
|
- |
| Cl-8.3(Squareness and Edge Straightness) |
- |
1000 |
|
- |
| Cl-8.4(Tolerances) |
- |
1000 |
|
- |
| Cl-9.1, Table-2 (i)(Density variation within board, Max) |
- |
1000 |
|
- |
| Cl-9.1, Table-2 (ii)(Moisture content,) |
- |
1000 |
|
- |
| Cl-9.1, Table-3 (GP-REG) (i)(Modulus of rupture (MoR), N/mm2, Min — Major axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-3 (GP-REG) (ii)(Modulus of rupture (MoR), N/mm2, Min — Minor axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-3 (GP-REG) (iii)(Modulus of elasticity (MoE), N/mm2, Min — Major axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-3 (GP-REG) (iv)(Modulus of elasticity (MoE), N/mm2, Min — Minor axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-3 (GP-REG) (v)(Internal bond strength, N/mm2, Min) |
- |
2000 |
|
- |
| Cl-9.1, Table-3 (GP-REG) (vi)(24 h thickness swelling (due to general absorption), percent, Max) |
- |
1500 |
|
- |
| Cl-9.1, Table-3 (GP-REG) (vii)(Screw withdrawal strength (face), N, Min) |
- |
1500 |
|
- |
| Cl-9.1, Table-3 (GP-REG) (viii)(Screw withdrawal strength (edge), N, Min) |
- |
1500 |
|
- |
| Cl-9.1, Table-4 (LB-REG) (i)(Modulus of rupture (MoR), N/mm2, Min — Major axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-4 (LB-REG) (ii)(Modulus of rupture (MoR), N/mm2, Min — Minor axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-4 (LB-REG) (iii)(Modulus of elasticity (MoE), N/mm2, Min — Major axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-4 (LB-REG) (iv)(Modulus of elasticity (MoE), N/mm2, Min — Minor axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-4 (LB-REG) (v)(Internal bond strength, N/mm2, Min) |
- |
2000 |
|
- |
| Cl-9.1, Table-4 (LB-REG) (vi)(24 h thickness swelling (due to general absorption), percent, Max) |
- |
1500 |
|
- |
| Cl-9.1, Table-4 (LB-REG) (vii)(Screw withdrawal strength (face), N, Min) |
- |
1500 |
|
- |
| Cl-9.1, Table-4 (LB-REG) (viii)(Screw withdrawal strength (edge), N, Min) |
- |
1500 |
|
- |
| Cl-9.1, Table-5 (LB-MR) (i)(Modulus of rupture (MoR), N/mm2, Min — Major axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-5 (LB-MR) (ii)(Modulus of rupture (MoR), N/mm2, Min — Minor axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-5 (LB-MR) (iii)(Modulus of elasticity (MoE), N/mm2, Min — Major axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-5 (LB-MR) (iv)(Modulus of elasticity (MoE), N/mm2, Min — Minor axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-5 (LB-MR) (v)(Internal bond strength, N/mm2, Min) |
- |
2000 |
|
- |
| Cl-9.1, Table-5 (LB-MR) (vi)(24 h thickness swelling (due to general absorption), percent, Max) |
- |
1500 |
|
- |
| Cl-9.1, Table-5 (LB-MR) (vii)(Screw withdrawal strength (face), N, Min) |
- |
1500 |
|
- |
| Cl-9.1, Table-5 (LB-MR) (viii)(Screw withdrawal strength (edge), N, Min) |
- |
1500 |
|
- |
| Cl-9.1, Table-5 (LB-MR) (ix) (a)("Option1, Cyclic test:
(i) Internal bond Strength, N/mm2, Min") |
- |
2000 |
|
- |
| Cl-9.1, Table-5 (LB-MR) (ix) (b)("Option 2, Boil test:
(i) Internal bond strength, N/mm2, Min") |
- |
2000 |
|
- |
| Cl-9.1, Table-5 (LB-MR) (x)(Modulus of rupture after cyclic test, N/mm2— Major axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-6 (HLB-MR) (i)(Modulus of rupture (MoR), N/mm2, Min — Major axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-6 (HLB-MR) (ii)(Modulus of rupture (MoR), N/mm2, Min — Minor axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-6 (HLB-MR) (iii)(Modulus of elasticity (MoE), N/mm2, Min — Major axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-6 (HLB-MR) (iv)(Modulus of elasticity (MoE), N/mm2, Min — Minor axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-6 (HLB-MR) (v)(Internal bond strength, N/mm2, Min) |
- |
2000 |
|
- |
| Cl-9.1, Table-6 (HLB-MR) (vi)(24 h thickness swelling (due to general absorption), percent, Max) |
- |
1500 |
|
- |
| Cl-9.1, Table-6 (HLB-MR) (vii)(Screw withdrawal strength (face),) |
- |
1500 |
|
- |
| Cl-9.1, Table-6 (HLB-MR) (viii)(Screw withdrawal strength (edge),) |
- |
1500 |
|
- |
| Cl-9.1, Table-6 (HLB-MR) (ix)("Option1, Cyclic test:
(i) Internal bond Strength, N/mm2, Min") |
- |
2000 |
|
- |
| Cl-9.1, Table-6 (HLB-MR) (ix)("Option 2, Boil test:
(i) Internal bond strength, N/mm2, Min") |
- |
2000 |
|
- |
| Cl-9.1, Table-6 (HLB-MR) (x)(Modulus of rupture after cyclic test, N/mm2 — Major axis) |
- |
1500 |
|
- |
| Cl-9.1, Table-7 (i)(Formaldehyde content Fc, mg/100 g for oven dry board) |
- |
3000 |
|
- |
| Cl-9.1, Table-7 (ii)(Steady-state formaldehyde emission, Fc, mg/m3) |
- |
0 |
|
- |
| Cl-11(Marking) |
- |
0 |
|
- |
|
- |
-
Included w.e.f 17.03.2026 |
| 1468 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 4984 (2016) |
Polyethylene pipes for water supply - Specification (Fifth Revision) |
- |
26500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.10(Slow Crack Growth Rate) |
- |
1000 |
|
- |
| 8.9 table-6(Elongation at Break) |
- |
1500 |
|
- |
| 8.8(Tensile Strength for Butt-fusion) |
- |
1500 |
|
- |
| 8.7(Density) |
- |
1000 |
|
- |
| 8.5 (Oxidation Induction Time) |
- |
2000 |
|
- |
| 8.4( Melt Flow Rate) |
- |
1500 |
|
- |
| 8.2(Longitudinal Reversion Test) |
- |
1000 |
|
- |
| 8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints) |
- |
2000 |
|
- |
| 8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe) |
- |
2000 |
|
- |
| 7.4.1.2(Ovality) |
- |
200 |
|
- |
| Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported)) |
- |
200 |
|
- |
| 7.2(Length) |
- |
200 |
|
- |
| 6.2.1(6.1.1 Identification Stripes) |
- |
200 |
|
- |
| 6.2(Colour) |
- |
200 |
|
- |
| 6.1.4(PIPE DESCRIPTION) |
- |
200 |
|
- |
| 6.1.3 (PIPE DESCRIPTION) |
- |
200 |
|
- |
| 6, 6.1.2(PIPE DESCRIPTION) |
- |
200 |
|
- |
| 6, 6.1.1(PIPE DESCRIPTION) |
- |
200 |
|
- |
| 6, 6.1(PIPE DESCRIPTION) |
- |
200 |
|
- |
| 8.6(Overall migration) |
- |
2000 |
|
- |
| 8.3(Carbon black) |
- |
1000 |
|
- |
| 5.4(Anti oxydent) |
- |
0 |
|
EXCLUSION REQUESTED |
| 5.3(e)(Carbon Black Master Batch) |
- |
0 |
|
EXCLUSION REQUESTED |
| 5.3(d)(Carbon Black Master Batch) |
- |
2500 |
|
- |
| 5.3(c)(Carbon Black Master Batch) |
- |
2000 |
|
- |
| 5.3(b)(Carbon Black Master Batch) |
- |
0 |
|
EXCLUSION REQUESTED |
| 5.3 (a)(Carbon Black Master Batch) |
- |
2000 |
|
- |
| 5.2(Polyethylene Resin) |
- |
2000 |
|
- |
| 5, 5.1 table-1(MATERIALS) |
- |
200 |
|
- |
| 7() |
- |
500 |
|
- |
| 5.2(Density) |
- |
1000 |
|
- |
| 5.2(MFI @ 1900C/5.0 Kg) |
- |
1000 |
|
- |
| 5.2(Volatile matter Content) |
- |
1000 |
|
- |
| 5.3(Toluene Extract) |
- |
1000 |
|
- |
| Clause 7.1(Visual Apperance) |
- |
200 |
|
- |
| Clause 7.3(Coiling) |
- |
200 |
|
- |
| Clause 8.3(Carbon Black content) |
- |
1500 |
|
- |
| Clause 8.3(Carbon Black Dispersion) |
- |
1000 |
|
- |
| Clause 8.6(Overall migration (stimulate)) |
- |
2000 |
|
- |
| Clause 8.6(Overall migration (surface of material)) |
- |
2000 |
|
- |
| 7.1(Visual Appearance) |
- |
200 |
|
- |
| 7.3(Coiling) |
- |
200 |
|
- |
| Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter) |
- |
2500 |
|
- |
| Cl. 8.3(Carbon Black Content) |
- |
1500 |
|
- |
| Cl. 8.3(Carbon Black Dispersion) |
- |
1000 |
|
- |
| 5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963) |
- |
1500 |
|
- |
| 8.7(Density-IS 7328:2020) |
- |
1000 |
|
- |
| 8.7(Corrected Density- IS 7328:2020) |
- |
500 |
|
- |
| 8.9,T6("Tensile - IS 4984-2016
(Annexure-H)") |
- |
2500 |
|
- |
| 8.9,T6("Elongation -IS 4984-2016
(Annexure-H)") |
- |
2500 |
|
- |
| Cl 8.3(Carbon Black Content) |
- |
1000 |
|
- |
| Cl 8.3(Carbon Black Dispersion) |
- |
1000 |
|
- |
| CL 7.4(Wall Thickness (Take 8 reading & Minimum and Maximum reported)) |
- |
1000 |
|
- |
| 8.10(Slow Crack Growth Rate) |
- |
0 |
|
- |
| Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported)) |
- |
0 |
|
- |
| 7() |
- |
0.03 |
|
- |
| 5.2(Density) |
- |
0 |
|
- |
| 5.2(MFI @ 1900C/5.0 Kg) |
- |
0.03 |
|
- |
| 5.2(Volatile matter Content) |
- |
0 |
|
- |
| 5.3(Toluene Extract) |
- |
0.03 |
|
- |
| Clause 7.1(Visual Apperance) |
- |
0 |
|
- |
| Clause 7.3(Coiling) |
- |
0 |
|
- |
| Clause 8.3(Carbon Black content) |
- |
0 |
|
- |
| Clause 8.3(Carbon Black Dispersion) |
- |
0 |
|
- |
| Clause 8.6(Overall migration (stimulate)) |
- |
0 |
|
- |
| Clause 8.6(Overall migration (surface of material)) |
- |
0 |
|
- |
| 7.1(Visual Appearance) |
- |
0 |
|
- |
| 7.3(Coiling) |
- |
0.02 |
|
- |
| Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter) |
- |
0 |
|
- |
| Cl. 8.3(Carbon Black Content) |
- |
0 |
|
- |
| Cl. 8.3(Carbon Black Dispersion) |
- |
0 |
|
- |
| 5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963) |
- |
0 |
|
- |
| 8.7(Density-IS 7328:2020) |
- |
0.03 |
|
- |
| 8.7(Corrected Density- IS 7328:2020) |
- |
0.03 |
|
- |
| 8.9,T6("Tensile - IS 4984-2016
(Annexure-H)") |
- |
0.02 |
|
- |
| 8.9,T6("Elongation -IS 4984-2016
(Annexure-H)") |
- |
0.02 |
|
- |
| Cl 8.3(Carbon Black Content) |
- |
0 |
|
- |
| Cl 8.3(Carbon Black Dispersion) |
- |
0 |
|
- |
| CL 7.4(Wall Thickness (Take 8 reading & Minimum and Maximum reported)) |
- |
0 |
|
- |
|
- |
-
1.
5.4 (Anti oxydent) anti-oxydent 5.4 (Anti oxydent), 5.3(b) (Carbon Black Master Batch), 5.3 (Toluene Extract), Cl 5.2 Table 2 Sl No V Water content, Cl 5.3(a) Higher Olefin constituent additional requirement.
2.
5.3(b) (Carbon Black Master Batch) Carbon black master batch 5.4 (Anti oxydent), 5.3(b) (Carbon Black Master Batch), 5.3 (Toluene Extract), Cl 5.2 Table 2 Sl No V Water content, Cl 5.3(a) Higher Olefin constituent additional requirement.
3.
5.3(e) (Carbon Black Master Batch) carbon black master batch 5.4 (Anti oxydent), 5.3(b) (Carbon Black Master Batch), 5.3 (Toluene Extract), Cl 5.2 Table 2 Sl No V Water content, Cl 5.3(a) Higher Olefin constituent additional requirement. |
| 1469 |
Nemko India (Test Lab) Pvt. Ltd., Faridabad
| 8138426
| IS 302 : Part 2 : Sec 3 (2024) |
Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision) |
- |
240000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(General requirement) |
- |
0 |
|
-- |
| Cl-7(Marking and instructions) |
- |
1000 |
|
10% (Discount offered to BIS) |
| Cl-8(Protection against access to live parts) |
- |
4000 |
|
10% (Discount offered to BIS) |
| Cl-10(Power input and current) |
- |
5000 |
|
10% (Discount offered to BIS) |
| Cl-11(Heating) |
- |
5000 |
|
10% (Discount offered to BIS) |
| Cl-12(Charging of metal-ion batteries) |
- |
2000 |
|
10% (Discount offered to BIS) |
| Cl-13(Leakage current and electric strength at operating temperature) |
- |
2000 |
|
10% (Discount offered to BIS) |
| Cl-14(Transient overvoltages) |
- |
2000 |
|
10% (Discount offered to BIS) |
| Cl-15(Moisture resistance) |
- |
10000 |
|
10% (Discount offered to BIS) |
| Cl-16(Leakage current and electric strength) |
- |
3000 |
|
10% (Discount offered to BIS) |
| Cl-17(Overload protection of transformers and associated circuits) |
- |
2000 |
|
10% (Discount offered to BIS) |
| Cl-18(Endurance) |
- |
1000 |
|
10% (Discount offered to BIS) |
| Cl-19(Abnormal operation) |
- |
9000 |
|
10% (Discount offered to BIS) |
| Cl-20(Stability and mechanical hazards) |
- |
2000 |
|
10% (Discount offered to BIS) |
| Cl-21(Mechanical strength) |
- |
2000 |
|
10% (Discount offered to BIS) |
| Cl-22(Construction) |
- |
4000 |
|
10% (Discount offered to BIS) |
| Cl-23(Internal wiring) |
- |
2000 |
|
10% (Discount offered to BIS) |
| Cl-25(Supply connection and external flexible cords) |
- |
2000 |
|
10% (Discount offered to BIS) |
| Cl-26(Terminals for external conductors) |
- |
2000 |
|
10% (Discount offered to BIS) |
| Cl-27(Provision for earthing) |
- |
4000 |
|
10% (Discount offered to BIS) |
| Cl-28(Screws and connections) |
- |
2000 |
|
10% (Discount offered to BIS) |
| Cl-29(Clearances, creepage distances and solid insulation) |
- |
3000 |
|
10% (Discount offered to BIS) |
| Cl-30(Resistance to heat and fire) |
- |
8000 |
|
10% (Discount offered to BIS) |
| Cl-31(Resistance to rusting) |
- |
2000 |
|
10% (Discount offered to BIS) |
| Cl-19.11.4.1(Electrostatic discharges) |
- |
20000 |
|
10% (Discount offered to BIS) |
| Cl-19.11.4.2(Radiated fields) |
- |
40000 |
|
10% (Discount offered to BIS) |
| Cl-19.11.4.3(Fast transient bursts) |
- |
15000 |
|
10% (Discount offered to BIS) |
| Cl-19.11.4.4(Surge immunity test) |
- |
15000 |
|
10% (Discount offered to BIS) |
| Cl-19.11.4.5(Immunity to conducted discharges) |
- |
20000 |
|
10% (Discount offered to BIS) |
| Cl-19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
20000 |
|
10% (Discount offered to BIS) |
| Cl-19.11.4.7(Harmonics) |
- |
40000 |
|
10% (Discount offered to BIS) |
| Cl-4(General requirement) |
- |
0 |
|
-- |
| Cl-7(Marking and instructions) |
- |
0 |
|
-- |
| Cl-8(Protection against access to live parts) |
- |
0 |
|
-- |
| Cl-10(Power input and current) |
- |
0 |
|
-- |
| Cl-11(Heating) |
- |
0 |
|
-- |
| Cl-12(Charging of metal-ion batteries) |
- |
0 |
|
-- |
| Cl-13(Leakage current and electric strength at operating temperature) |
- |
0 |
|
-- |
| Cl-14(Transient overvoltages) |
- |
0 |
|
-- |
| Cl-15(Moisture resistance) |
- |
0 |
|
-- |
| Cl-16(Leakage current and electric strength) |
- |
0 |
|
-- |
| Cl-17(Overload protection of transformers and associated circuits) |
- |
0 |
|
-- |
| Cl-18(Endurance) |
- |
0 |
|
-- |
| Cl-19(Abnormal operation) |
- |
0 |
|
-- |
| Cl-20(Stability and mechanical hazards) |
- |
0 |
|
-- |
| Cl-21(Mechanical strength) |
- |
0 |
|
-- |
| Cl-22(Construction) |
- |
0 |
|
-- |
| Cl-23(Internal wiring) |
- |
0 |
|
-- |
| Cl-25(Supply connection and external flexible cords) |
- |
0 |
|
-- |
| Cl-26(Terminals for external conductors) |
- |
0 |
|
-- |
| Cl-27(Provision for earthing) |
- |
0 |
|
-- |
| Cl-28(Screws and connections) |
- |
0 |
|
-- |
| Cl-29(Clearances, creepage distances and solid insulation) |
- |
0 |
|
-- |
| Cl-30(Resistance to heat and fire) |
- |
0 |
|
-- |
| Cl-31(Resistance to rusting) |
- |
0 |
|
-- |
| Cl-19.11.4.1(Electrostatic discharges) |
- |
0 |
|
-- |
| Cl-19.11.4.2(Radiated fields) |
- |
0 |
|
-- |
| Cl-19.11.4.3(Fast transient bursts) |
- |
0 |
|
-- |
| Cl-19.11.4.4(Surge immunity test) |
- |
0 |
|
00 |
| Cl-19.11.4.5(Immunity to conducted discharges) |
- |
0 |
|
-- |
| Cl-19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
0 |
|
-- |
| Cl-19.11.4.7(Harmonics) |
- |
0 |
|
-- |
| Cl-4(General requirement) |
- |
0 |
|
- |
| Cl-7(Marking and instructions) |
- |
0 |
|
- |
| Cl-8(Protection against access to live parts) |
- |
0 |
|
- |
| Cl-10(Power input and current) |
- |
0 |
|
- |
| Cl-11(Heating) |
- |
0 |
|
- |
| Cl-12(Charging of metal-ion batteries) |
- |
0 |
|
- |
| Cl-13(Leakage current and electric strength at operating temperature) |
- |
0 |
|
- |
| Cl-14(Transient overvoltages) |
- |
0 |
|
- |
| Cl-15(Moisture resistance) |
- |
0 |
|
- |
| Cl-16(Leakage current and electric strength) |
- |
0 |
|
- |
| Cl-17(Overload protection of transformers and associated circuits) |
- |
0 |
|
- |
| Cl-18(Endurance) |
- |
0 |
|
- |
| Cl-19(Abnormal operation) |
- |
0 |
|
- |
| Cl-20(Stability and mechanical hazards) |
- |
0 |
|
- |
| Cl-21(Mechanical strength) |
- |
0 |
|
- |
| Cl-22(Construction) |
- |
0 |
|
- |
| Cl-23(Internal wiring) |
- |
0 |
|
- |
| Cl-25(Supply connection and external flexible cords) |
- |
0 |
|
- |
| Cl-26(Terminals for external conductors) |
- |
0 |
|
- |
| Cl-27(Provision for earthing) |
- |
0 |
|
- |
| Cl-28(Screws and connections) |
- |
0 |
|
- |
| Cl-29(Clearances, creepage distances and solid insulation) |
- |
0 |
|
- |
| Cl-30(Resistance to heat and fire) |
- |
0 |
|
- |
| Cl-31(Resistance to rusting) |
- |
0 |
|
- |
| Cl-19.11.4.1(Electrostatic discharges) |
- |
0 |
|
- |
| Cl-19.11.4.2(Radiated fields) |
- |
0 |
|
- |
| Cl-19.11.4.3(Fast transient bursts) |
- |
0 |
|
- |
| Cl-19.11.4.4(Surge immunity test) |
- |
0 |
|
- |
| Cl-19.11.4.5(Immunity to conducted discharges) |
- |
0 |
|
- |
| Cl-19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
0 |
|
- |
| Cl-19.11.4.7(Harmonics) |
- |
0 |
|
- |
| Cl-4(General requirement) |
- |
0 |
|
- |
| Cl-7(Marking and instructions) |
- |
0 |
|
- |
| Cl-8(Protection against access to live parts) |
- |
0 |
|
- |
| Cl-10(Power input and current) |
- |
0 |
|
- |
| Cl-11(Heating) |
- |
0 |
|
- |
| Cl-12(Charging of metal-ion batteries) |
- |
0 |
|
- |
| Cl-13(Leakage current and electric strength at operating temperature) |
- |
0 |
|
- |
| Cl-14(Transient overvoltages) |
- |
0 |
|
- |
| Cl-15(Moisture resistance) |
- |
0 |
|
- |
| Cl-16(Leakage current and electric strength) |
- |
0 |
|
- |
| Cl-17(Overload protection of transformers and associated circuits) |
- |
0 |
|
- |
| Cl-18(Endurance) |
- |
0 |
|
- |
| Cl-19(Abnormal operation) |
- |
0 |
|
- |
| Cl-20(Stability and mechanical hazards) |
- |
0 |
|
- |
| Cl-21(Mechanical strength) |
- |
0 |
|
- |
| Cl-22(Construction) |
- |
0 |
|
- |
| Cl-23(Internal wiring) |
- |
0 |
|
- |
| Cl-25(Supply connection and external flexible cords) |
- |
0 |
|
- |
| Cl-26(Terminals for external conductors) |
- |
0 |
|
- |
| Cl-27(Provision for earthing) |
- |
0 |
|
- |
| Cl-28(Screws and connections) |
- |
0 |
|
- |
| Cl-29(Clearances, creepage distances and solid insulation) |
- |
0 |
|
- |
| Cl-30(Resistance to heat and fire) |
- |
0 |
|
- |
| Cl-31(Resistance to rusting) |
- |
0 |
|
- |
| Cl-19.11.4.1(Electrostatic discharges) |
- |
0 |
|
- |
| Cl-19.11.4.2(Radiated fields) |
- |
0 |
|
- |
| Cl-19.11.4.3(Fast transient bursts) |
- |
0 |
|
- |
| Cl-19.11.4.4(Surge immunity test) |
- |
0 |
|
- |
| Cl-19.11.4.5(Immunity to conducted discharges) |
- |
0 |
|
- |
| Cl-19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
0 |
|
- |
| Cl-19.11.4.7(Harmonics) |
- |
0 |
|
- |
| Cl-4(General requirement) |
- |
0 |
|
- |
| Cl-7(Marking and instructions) |
- |
0 |
|
- |
| Cl-8(Protection against access to live parts) |
- |
0 |
|
- |
| Cl-10(Power input and current) |
- |
0 |
|
- |
| Cl-11(Heating) |
- |
0 |
|
- |
| Cl-12(Charging of metal-ion batteries) |
- |
0 |
|
- |
| Cl-13(Leakage current and electric strength at operating temperature) |
- |
0 |
|
- |
| Cl-14(Transient overvoltages) |
- |
0 |
|
- |
| Cl-15(Moisture resistance) |
- |
0 |
|
- |
| Cl-16(Leakage current and electric strength) |
- |
0 |
|
- |
| Cl-17(Overload protection of transformers and associated circuits) |
- |
0 |
|
- |
| Cl-18(Endurance) |
- |
0 |
|
- |
| Cl-19(Abnormal operation) |
- |
0 |
|
- |
| Cl-20(Stability and mechanical hazards) |
- |
0 |
|
- |
| Cl-21(Mechanical strength) |
- |
0 |
|
- |
| Cl-22(Construction) |
- |
0 |
|
- |
| Cl-23(Internal wiring) |
- |
0 |
|
- |
| Cl-25(Supply connection and external flexible cords) |
- |
0 |
|
- |
| Cl-26(Terminals for external conductors) |
- |
0 |
|
- |
| Cl-27(Provision for earthing) |
- |
0 |
|
- |
| Cl-28(Screws and connections) |
- |
0 |
|
- |
| Cl-29(Clearances, creepage distances and solid insulation) |
- |
0 |
|
- |
| Cl-30(Resistance to heat and fire) |
- |
0 |
|
- |
| Cl-31(Resistance to rusting) |
- |
0 |
|
- |
| Cl-19.11.4.1(Electrostatic discharges) |
- |
0 |
|
- |
| Cl-19.11.4.2(Radiated fields) |
- |
0 |
|
- |
| Cl-19.11.4.3(Fast transient bursts) |
- |
0 |
|
- |
| Cl-19.11.4.4(Surge immunity test) |
- |
0 |
|
- |
| Cl-19.11.4.5(Immunity to conducted discharges) |
- |
0 |
|
- |
| Cl-19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
0 |
|
- |
| Cl-19.11.4.7(Harmonics) |
- |
0 |
|
- |
|
31 Dec, 2029 |
-
Included w.e.f 01.04.2026
Exclusion: Cl-24 (Components), Cl-32 (Radiation, toxicity and similar hazards) |
| 1470 |
Stellar Test House, Noida
| 8171606
| IS 302 : PART 1 (Commercial Electric Boiling Pans) |
Commercial Electric Boiling Pans |
- |
30000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6(Classifications) |
- |
500 |
|
- |
| 5(General conditions for tests) |
- |
500 |
|
- |
| 4(General Requirement) |
- |
500 |
|
- |
| 11.8(Temperature rise) |
- |
1000 |
|
- |
| 11.7(Duration corresponding) |
- |
1000 |
|
- |
| 11.6(Combined appliances) |
- |
1000 |
|
- |
| 11.5(Motor-operated appliances) |
- |
1000 |
|
- |
| 11.4(Heating appliances) |
- |
1000 |
|
- |
| 8.1.5(Live parts of built-in appliances) |
- |
1000 |
|
- |
| 18(Endurance) |
- |
1000 |
|
- |
| 17(Overload protection of transformers and associated circuits) |
- |
1000 |
|
- |
| 16(Leakage current and electric strength) |
- |
1000 |
|
- |
| 4(General requirement) |
- |
1000 |
|
- |
| 32(Radiation Toxicity and Similar Hazards) |
- |
1000 |
|
- |
| 31(Resistance to Rusting) |
- |
1000 |
|
- |
| 30.2(Needle Flame Test) |
- |
1000 |
|
- |
| 30.2(Glow Wire Test) |
- |
1000 |
|
- |
| 30.1(Ball pressure test) |
- |
1000 |
|
- |
| 29(clearance, creepage distances and solid insulation) |
- |
1000 |
|
- |
| 28(Screw test and connections) |
- |
1000 |
|
- |
| 27(Provision for earthing) |
- |
1000 |
|
- |
| 26(Terminals for external conductors) |
- |
1000 |
|
- |
| 25(Supply connection and external flexible cords) |
- |
1000 |
|
- |
| 24(Components) |
- |
1000 |
|
- |
| 23(General) |
- |
1000 |
|
- |
| 22(Construction verification related test) |
- |
1000 |
|
- |
| 21(Mechanical Strength Test) |
- |
1000 |
|
- |
| 20(Stability test) |
- |
1000 |
|
- |
| 19(Abnormal Operation) |
- |
1000 |
|
- |
| 18(Endurance Test requirements and tests) |
- |
1000 |
|
- |
| 17(Over Load Protection of Transformers and associated circuits) |
- |
1000 |
|
- |
| 16.3(Electric Strength (after clause 15 and 16.2)) |
- |
1000 |
|
- |
| 16.2(Leakage Current (after Clause 15)) |
- |
1000 |
|
- |
| 16.1(General) |
- |
1000 |
|
- |
| 16.0(General) |
- |
1000 |
|
- |
| 15.3(Humidity Test) |
- |
1000 |
|
- |
| 15.2(Spillage Test) |
- |
1000 |
|
- |
| 15.1(Ingress Protection test other than IPX0 (IP test)) |
- |
1000 |
|
- |
| 15.0(General) |
- |
1000 |
|
- |
| 14(Transient Over Voltages) |
- |
1000 |
|
- |
| 13.3(Electric Strength at operating temperature) |
- |
1000 |
|
- |
| 13.2(Leakage current at operating temperature) |
- |
1000 |
|
- |
| 13.1(General) |
- |
1000 |
|
- |
| 11.3(Heating) |
- |
1000 |
|
- |
| 11.2(General) |
- |
1000 |
|
- |
| 11.1(General) |
- |
1000 |
|
- |
| 10.2(Current input) |
- |
1000 |
|
- |
| 10.1(Power input) |
- |
1000 |
|
- |
| 9(Starting of motor operation test requirements and tests) |
- |
1000 |
|
- |
| 8.1.4(Protection against live parts against protective impedance) |
- |
1000 |
|
- |
| 8.1.3(Protection against live parts in visible glowing heating elements) |
- |
1000 |
|
- |
| 8.1.2(Protection against live parts in openings) |
- |
1000 |
|
- |
| 8.1.1(Protection against live parts in all positions) |
- |
1000 |
|
- |
| 7(Marking and instructions) |
- |
500 |
|
- |
|
26 Sep, 2028 |
-
"1 19.11.4.7 (Harmonics) EMI/EMC Test Test facilities not available
2 19.11.4.6 (Class 3 Voltage dips and interruptions) EMI/EMC Test Test facilities not available
3 19.11.4.5 (Immunity to conducted discharges) EMI/EMC Test Test facilities not available
4 19.11.4.3 (Fast transient bursts) EMI/EMC Test Test facilities not available
5 19.11.4.2 (Radiated fields) EMI/EMC Test Test facilities not available
6 19.11.4.1 (Electrostatic discharges) EMI/EMC Test Test facilities not available
7 19.11.4.4 (Surge immunity test) EMI/EMC Test Test facilities not available" |
