BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11894 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

1471

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

6121636

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

8500 View breakup
-

Clause No.	Exclusion	Remark
6.1(Carbon %)	-	-
6.1(Sulphur %)	-	-
6.1(Phosphorus %)	-	-
6.1(Manganese %)	-	-
6.1(Silicon %)	-	-
6.1( Nitrogen%)	-	-
6.1(Microalloying)	-	-
Cl 8(UTM)	-	-
Cl 9(Press)	-	-
Cl 10(Die Press)	-	-
Cl 12(Workmanship)	-	-
Cl 13(Length, Width & Thickness)	-	-

19 Apr, 2028

-
-

1472

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

6121636

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	500	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	500	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	500	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	500	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	500	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	500	-
Cl. 14.1(Exact Length)	-	250	-
Cl. 14.1(Weight on individual length)	-	250	-

19 Apr, 2028

-
-

1473

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

6121636

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

HOT ROLLED STEEL FLAT PRODUCTS

7000 View breakup
-

Clause No.	Exclusion	Remark
7.1(Carbon %)	-	-
7.1(Sulphur %)	-	-
7.1(Phosphorus %)	-	-
7.1(Manganese %)	-	-
7.1(Silicon %)	-	-
7.1( Copper %)	-	-
7.1(CE)	-	-
7.1( Nitrogen%)	-	-
Cl 8(UTM)	-	-
Cl 9(Press)	-	-
Cl 10(Sudden Load Applied)	-	-
Cl 11(Expansion Test)	-	-
Cl 13(Workmanship)	-	-
Cl 14(Weldability)	-	-
Cl 15(Length, Width & Thickness)	-	-

19 Apr, 2028

-
-

1474

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

6121636

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

5000 View breakup
-

Clause No.	Exclusion	Remark
6.1(Carbon %)	-	-
6.1(Sulphur %)	-	-
6.1(Phosphorus %)	-	-
6.1(Manganese %)	-	-
6.1(Silicon %)	-	-
6.1( Nitrogen%)	-	-
6.1(Microalloying)	-	-
6.1(Boron)	-	-
6.1( Ti)	-	-
6.1(V)	-	-
Cl 8(Workmanship)	-	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	-

19 Apr, 2028

-
-

1475

LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD

6121636

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

3500 View breakup
-

Clause No.	Exclusion	Remark
5.1(carbon)	-	-
5.1(sulphur)	-	-
5.1(phosphorus)	-	-
5.1(manganese)	-	-
5.1(aluminium)	-	-
5.1(silicon )	-	-
5.1(nitrogen)	-	-
Cl 8.1(UTM)	-	-
Cl 8.2(Press)	-	-
Cl 10(Galvanising Test)	-	-
Cl 12(Workmanship)	-	-
Cl 13(Weight)	-	-
Cl 14(Length, Width & Thickness)	-	-

19 Apr, 2028

-
-

1476

Sleen India Biz venture Private Limited, Agra

9139736

IS 362 (1991)

Parliament Hinges -specification

All type

13800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 (Brass parliament hinges shall have either bright or satin finish and shall be suitably protected against discoloration)	-	2000	-
Cl. 7.2 (Ref. Cl. 11.1 of IS 1868:1996)( appearance and Colour - shall be free from visible defects on the significant surface(s) when viewed from an agreed distance)	-	2000	-
Cl. 7.2 (Ref. Cl.9 of IS 1868:1996)(Aluminium shall be anodized to a bright, natural, sat or satin finish or dyed. )	-	0	Test price for cl.7 is 2000/-.
Cl. 7.2 (Ref. Cl.9 of IS 1868:1996)(Anodinc casting thickness (Cl. 9.2 of IS 1868:1996))	-	0	-
Cl. 7.3(Mild steel parliament hinges shall be finished bright or electro-galvanized as specified by the purchaser)	-	500	-
3(Type)	-	1000	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-Size)	-	1600	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-A)	-	0	Test price for table-2-dimension test is 1600/-.
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-B)	-	0	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-C)	-	0	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-D)	-	0	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-d)	-	0	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-E)	-	0	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-Thickness of Flap)	-	0	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-No. of Screw holes)	-	0	-
5.1-able 2(Dlmenslons for Aluminium Alloy Parliament Hinges-Holes for screw designation)	-	0	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-Size)	-	1500	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-A)	-	0	Test price for table-3-dimension test is 1500/-.
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-B)	-	0	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-C)	-	0	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-D)	-	0	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-d)	-	0	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-E)	-	0	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-Thickness of Flap)	-	0	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-No. of Screw holes)	-	0	-
5.1-able 3(Dimensions for Cast Brass Parliament Hinges-Holes for screw designation)	-	0	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-Size)	-	1500	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-A)	-	0	Test price for table-4-dimension test is 1500/-.
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-B)	-	0	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-C)	-	0	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-D)	-	0	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-d)	-	0	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-E)	-	0	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-Thickness of Flap)	-	0	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-No. of Screw holes)	-	0	-
5.1-Table 4(Dimensions for Mild Steel Parliament Hinges-Holes for screw designation)	-	0	-
6.1(MANUFACTURE-General)	-	500	-
6.1(MANUFACTURE-General)	-	0	Test price for cl. 6.1-General is 500/-.
6.1(MANUFACTURE-General)	-	0	-
6.2(MANUFACTURE-Knuckles)	-	500	-
6.2(MANUFACTURE-Knuckles)	-	0	Test price for cl. 6.2-knuckles is 500/-.
6.2(MANUFACTURE-Knuckles)	-	0	-
6.2(MANUFACTURE-Knuckles)	-	0	-
6.3(MANUFACTURE-Pins)	-	2000	-
6.3(MANUFACTURE-Pins)	-	0	Test price for cl. 6.3-pins is 2000/-.
6.3(MANUFACTURE-Pins)	-	0	-
6.3(MANUFACTURE-Pins)	-	0	-
6.4(MANUFACTURE-Screw Holes)	-	200	-
6.5(MANUFACTURE-Position of Holes)	-	800	-
6.5(MANUFACTURE-Position of Holes)	-	0	Test price for cl. 6.5-position of holes is 800/-.
6.5(MANUFACTURE-Position of Holes-minimum distance from the ends of the flap)	-	0	-
6.5(MANUFACTURE-Position of Holes-minimum distance from the inner edge)	-	0	-
6.5(MANUFACTURE-Position of Holes)	-	0	-
7.1(FINISH)	-	500	-
7.3(FINISH)	-	500	-

15 May, 2027

-
Included w.e.f 10.07.2025

1477

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 18112 (2022)

Digital Television Receiver for Satellite Broadcast Transmission Specification

400000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	10000	-
3.3(Specifications)	-	10000	-
3.5(Safety specification)	-	35000	-
3.6(Electromagnetic Compatibility (EMC) Requirements)	-	150000	-
4(Marking)	-	5000	-
5(Operating Life Test)	-	30000	-
3.1, Table-1, i) a)(Hardware specification)	-	2000	-
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	5000	-
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	5000	-
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	5000	-
3.1, Table-1, i) e)(Active Format descriptors)	-	5000	-
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	5000	-
3.1, Table-1, i) g)(Teletext)	-	5000	-
3.1, Table-1, i) h)(Multi-language support)	-	2000	-
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	5000	-
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	5000	-
3.1, Table-1, i) m)(Service demultiplexing)	-	5000	-
3.1, Table-1, i) n)(Data services)	-	5000	-
3.1, Table-1, i) p)(OSD)	-	5000	-
3.1, Table-1, i) q)(DTV Receiver character set)	-	5000	-
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	5000	-
3.1, Table-1, i) s)(Time)	-	2000	-
3.1, Table-1, i) t)(Digital TV output)	-	2000	-
3.4, Table-2, i) b)(Frequency)	-	2000	-
3.4, Table-2, i) a)(Input voltage range)	-	2000	-
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	5000	-
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	2000	-
3.1, Table-1, ii) c)(Network evolution)	-	2000	-
3.4, Table-2, iii) c)(RF input impedance)	-	5000	-
3.1, Table-1, ii) d)(Services available)	-	2000	-
3.1, Table-1, ii) e)(Selection via Service List)	-	2000	-
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	1000	-
3.1, Table-1, ii) g)(Favourite Channel list)	-	1000	-
3.1, Table-1, ii) h)(Hidden Services)	-	1000	-
3.4, Table-2, iii) b)(Input frequency range)	-	5000	-
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	1000	-
3.1, Table-1, ii) k)(RF input signal)	-	2000	-
3.1, Table-1, ii) m)(LNB supply current)	-	2000	-
3.1, Table-1, ii) n)(LNB supply voltage)	-	2000	-
3.1, Table-1, ii) p)(LNB Control)	-	2000	-
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	2000	-
3.4, Table-2, iii) a)(Input level per carrier)	-	5000	-
3.4, Table-2, iv) c)(RF input impedance)	-	5000	-
3.4, Table-2, iv) b)(Input frequency range)	-	5000	-
3.4, Table-2, iv) a)(Input level per carrier)	-	5000	-
3.4, Table-2, v)(Symbol rate)	-	2000	-
3.4, Table-2, vi)(RF input return loss)	-	5000	-
3.4, Table-2, vii)(DisEqC)	-	2000	-
3.4, Table-2, viii)(Operating ambient temperature range)	-	1000	-
3.4, Table-2, ix)(Operating humidity range)	-	1000	-
3.4, Table-2, x)(Power consumption)	-	5000	-
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	2000	-
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	2000	-
3.1, Table-1, v) a)(Remote Control)	-	2000	-
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	2000	-
3.1, Table-1, v) c)(Support package)	-	2000	-

31 Dec, 2026

-
Included w.e.f 06.06.2025

1478

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 302 : Part 2 : Sec 12 (1993)

Safety of household and similar electrical appliances - Specification: Part 2 particular requirements: Sec 12 warming plates and similar appliances

155000 View breakup
-

Clause No.	Exclusion	Remark
6(Classification)	-	-
7(Marking)	-	-
8(Protection against Access to Live Parts)	-	-
9(Starting Of Motor Operated Appliances)	-	-
10("Power Input & Current")	-	-
11(Temperature Rise/ Heating)	-	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	-
15(Moisture Resistance)	-	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength)	-	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	-
18(Endurance)	-	-
19(Abnormal Operation)	-	-
20(Stability & Mechanical Hazards)	-	-
21(Mechanical strength)	-	-
22(Construction)	-	-
23(Internal Wiring)	-	-
24(Components)	-	-
25(Supply Connection & External Flexible Cords)	-	-
26(Terminals For External Conductors)	-	-
27(Provision For Earthing)	-	-
28(Screws & Connections)	-	-
29(Clearances, Creepage Distances & Solid Insulation)	-	-
30(Resistance to Heat & Fire)	-	-
31(Resistance to Rusting)	-	-
32(Radiation hazards)	-	-
19.11.4.1(Electrostatic discharges)	-	-
19.11.4.3(Fast transient bursts)	-	-
19.11.4.4(Surge immunity test)	-	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	-
5(Rating)	-	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	-
6(Classification)	-	-
7(Marking)	-	-
8(Protection against Access to Live Parts)	-	-
9(Starting Of Motor Operated Appliances)	-	-
10("Power Input & Current")	-	-
11(Temperature Rise/ Heating)	-	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	-
15(Moisture Resistance)	-	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength)	-	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	-
18(Endurance)	-	-
19(Abnormal Operation)	-	-
20(Stability & Mechanical Hazards)	-	-
21(Mechanical strength)	-	-
22(Construction)	-	-
23(Internal Wiring)	-	-
24(Components)	-	-
25(Supply Connection & External Flexible Cords)	-	-
26(Terminals For External Conductors)	-	-
27(Provision For Earthing)	-	-
28(Screws & Connections)	-	-
29(Clearances, Creepage Distances & Solid Insulation)	-	-
30(Resistance to Heat & Fire)	-	-
31(Resistance to Rusting)	-	-
32(Radiation hazards)	-	-
19.11.4.1(Electrostatic discharges)	-	-
19.11.4.3(Fast transient bursts)	-	-
19.11.4.4(Surge immunity test)	-	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	-
5(Rating)	-	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	-

05 Apr, 2027

-
Included w.e.f 31.07.2025 Exclusion: Cl 19.11.4.2 (Radiated fields), Cl 19.11.4.5 (Immunity to conducted discharges), Cl 19.11.4.7 (Harmonics)

1479

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 16543 (2024)

All-glass evacuated solar collector tubes - Specification (First revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Structure of All-Glass Evacuated Solar Collector Tube)	-	200	-
Cl 4.2 & table 1(Outer Diameter of Cover Glass Tube)	-	200	-
Cl 4.2 & table 1(Outer Diameter of Inner Glass Tube Including Coating)	-	200	-
Cl 4.2 & table 1(The Thickness of Cover and Inner Glass Tube)	-	200	-
Cl 4.2 & table 1(Tube Length)	-	200	-
Cl 4.2 & table 1(Sealed off Part Length)	-	200	-
Cl 4.3(Absorber Area for Different Tube Sizes)	-	200	-
Cl 4.4(Solar Selective Absorbing Coating)	-	200	-
Cl 4.5(Calculation for Number of Tubes for The Heating System)	-	200	-
Cl 5.1.1(Transmittance ratio ( material))	-	300	-
Cl 5.1.2(Bubble & crack (material))	-	300	-
Cl 5.1.3(Knots (material))	-	300	-
Cl 5.1.4(Solar absorbing ratio (material))	-	300	-
Cl 5.2.1(Scratch length and visibility)	-	300	-
Cl 5.2.2(Appearance of selective coating)	-	300	-
Cl 5.2.3(Colour fading area)	-	300	-
Cl 5.2.4(Strut member)	-	300	-
Cl 5.2.5(The inner and cover tube at the open end)	-	300	-
Cl 5.2.6(Length of an all-glass evacuated solar collector tube)	-	300	-
Cl 5.2.7(Bending of the all-glass evacuated solar collector tube)	-	300	-
Cl 5.2.8(Cross-section of the open end)	-	300	-
Cl 5.2.9(Sealed end)	-	300	-
Cl 7.2.2(Uniformity)	-	500	-
Cl 7.4(Stagnation Performance Parameter Test)	-	1000	-
Cl 7.5(Stagnation Solar Irradiation Test)	-	1000	-
Cl 7.6(Average Heat Loss Coefficient Test)	-	1000	-
Cl 7.7(Vacuum Performance Test)	-	1500	-
Cl 7.8(Resistance to Thermal Shock Test)	-	1000	-
Cl 7.9(Resistance to Impact Test)	-	1000	-
Cl 7.10(0 Resistance to Internal Pressure Test)	-	1000	-
Cl 7.11(Absorptivity and Emissivity Test of the Selective Coating)	-	1000	-
Cl 9(Marking)	-	300	-

23 Jun, 2028

-
Included w.e.f.20.05.2025

1480

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 17550 : Part 2 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 2 Performance Requirements (First Revision)

340000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Storage Test)	-	38000	-
7(Cooling Capacity Test)	-	38000	-
8(Freezing Capacity Test)	-	38000	-
9("Automatic Ice-Making Capacity Test")	-	38000	-
Cl. No.4.6 & Annex A(PULL-DOWN TEST)	-	50000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	45000	-
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	46000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	47000	-

23 Jun, 2028

-
Included w.e.f.29.05.2025

1481

Sleen India Biz venture Private Limited, Agra

9139736

IS 205 (1992)

Non - Ferrous metal butt specification (Fourth Revision)

All type

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 -Table 1-Flap- i (Ref. Cl 5.1, Table 1 Designation 64430 or 65032 of IS 733 : 1983)(Chemical composition - Aluminium - IS 504)	-	200	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Flap- i (Ref. Cl 5.1, Table 1 Designation 64430 or 65032 of IS 733 : 1983)(Chemical composition - Copper - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1- Flap-i (Ref. Cl 5.1, Table 1 Designation 64430 or 65032 of IS 733 : 1983)(Chemical composition - Magnesium - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1- Flap-i (Ref. Cl 5.1, Table 1 Designation 64430 or 65032 of IS 733 : 1983)(Chemical composition - Iron - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Flap- i (Ref. Cl 5.1, Table 1 Designation 64430 or 65032 of IS 733 : 1983)(Chemical composition - Manganese - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Flap- i (Ref. Cl 5.1, Table 1 Designation 64430 or 65032 of IS 733 : 1983)(Chemical composition - Zinc - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Flap- i (Ref. Cl 5.1, Table 1 Designation 64430 or 65032 of IS 733 : 1983)(Chemical composition - Titanium and or other grain refining elements - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1- Flap-i (Ref. Cl 5.1, Table 1 Designation 64430 or 65032 of IS 733 : 1983)(Chemical composition - Chromium - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1- Flap-ii (Ref. Cl 8.1, Table 1 of IS 319 : 1989)(Chemical composition - Copper - IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1-Flap- ii (Ref. Cl 8.1, Table 1 of IS 319 : 1989)(Chemical composition - Lead - IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1-Flap- ii (Ref. Cl 8.1, Table 1 of IS 319 : 1989)(Chemical composition - Iron - IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1-Flap- ii (Ref. Cl 8.1, Table 1 of IS 319 : 1989)(Chemical composition - Total other impurities excluding iron - IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1- Flap-ii (Ref. Cl 8.1, Table 1 of IS 319 : 1989)(Chemical composition - Zinc- IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1- Flap-iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Copper plus incidental nickel - IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1- Flap-iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Nickel - IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1-Flap- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Tin - IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1-Flap- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Iron - IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1- Flap-iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Aluminium - IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1- Flap-iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983)(Chemical composition - Zinc - IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1- Flap-iv (Ref. Cl 6.1 , Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Copper - IS 3635:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1- Flap-iv (Ref. Cl 6.1 , Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Lead - IS 3635:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1- Flap-iv (Ref. Cl 6.1 , Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Iron - IS 3635:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1- Flap-iv (Ref. Cl 6.1 , Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Total impurities (including Iron) - IS 3635:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4 -Table 1- Flap-iv (Ref. Cl 6.1 , Table 1 Designation CuZn40 of IS 410 : 1977)(Chemical composition - Zinc - IS 3635:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- i (Ref. Cl 5.1, Table 1 Designation 64430 of IS 733 : 1983)(Chemical composition - Aluminium - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- i (Ref. Cl 5.1, Table 1 Designation 64430 of IS 733 : 1983)(Chemical composition - Copper - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- i (Ref. Cl 5.1, Table 1 Designation 64430 of IS 733 : 1983)(Chemical composition - Magnesium - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- i (Ref. Cl 5.1, Table 1 Designation 64430 of IS 733 : 1983)(Chemical composition - Silicon - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- i (Ref. Cl 5.1, Table 1 Designation 64430 of IS 733 : 1983)(Chemical composition - Iron - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- i (Ref. Cl 5.1, Table 1 Designation 64430 of IS 733 : 1983)(Chemical composition - Manganese - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- i (Ref. Cl 5.1, Table 1 Designation 64430 of IS 733 : 1983)(Chemical composition - Zinc - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Flap- i (Ref. Cl 5.1, Table 1 Designation 64430 or 65032 of IS 733 : 1983)(Chemical composition - Silicon - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- i (Ref. Cl 5.1, Table 1 Designation 64430 of IS 733 : 1983)(Chemical composition - Titanium and or other grain refining elements - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- i (Ref. Cl 5.1, Table 1 Designation 64430 of IS 733 : 1983)(Chemical composition - Chromium - IS 504)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- ii (Ref. Cl 6.1, Table 1 of IS 7608 : 1987)(Chemical composition - Tin - IS 4027:1967)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- ii (Ref. Cl 6.1, Table 1 of IS 7608 : 1987)(Chemical composition - Phosphorous - IS 4027:1967)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- ii (Ref. Cl 6.1, Table 1 of IS 7608 : 1987)(Chemical composition - Lead - IS 4027:1967)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- ii (Ref. Cl 6.1, Table 1 of IS 7608 : 1987)(Chemical composition - Total impurities - IS 4027:1967)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- ii (Ref. Cl 6.1, Table 1 of IS 7608 : 1987)(Chemical composition - Copper - IS 4027:1967)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- iii (Ref. Cl 6 of IS 280:1978- Cross ref. Cl. 6.1 -Table 1 of IS 7887 : 1992)(Chemical composition - Carbon - IS 228)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- iii (Ref. Cl 6 of IS 280:1978- Cross ref. Cl. 6.1 -Table 1 of IS 7887 : 1992)(Chemical composition - Manganese - IS 228)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- iii (Ref. Cl 6 of IS 280:1978- Cross ref. Cl. 6.1 -Table 1 of IS 7887 : 1992)(Chemical composition - Sulphur - IS 228)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- iii (Ref. Cl 6 of IS 280:1978- Cross ref. Cl. 6.1 -Table 1 of IS 7887 : 1992)(Chemical composition - Phosphorous - IS 228)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- iii (Ref. Cl 6 of IS 280:1978- Cross ref. Cl. 6.1 -Table 1 Note 2 of IS 7887 : 1992)(Chemical composition - Silicon - IS 228 (optional))	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- iii (Ref. Cl 6 of IS 280:1978- Cross ref. Cl. 6.1 -Table 1 Note 2 of IS 7887 : 1992)(Chemical composition - Tota Aluminium - IS 228 (optional))	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- iv (Ref. Cl 4.1 -Table 1 of IS 4413 : 1981)(Chemical composition - Copper - IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- iv (Ref. Cl 4.1 -Table 1 of IS 4413 : 1981)(Chemical composition - Lead - IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- iv (Ref. Cl 4.1 -Table 1 of IS 4413 : 1981)(Chemical composition - Iron - IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- iv (Ref. Cl 4.1 -Table 1 of IS 4413 : 1981)(Chemical composition - Total impurities - IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- iv (Ref. Cl 4.1 -Table 1 of IS 4413 : 1981)(Chemical composition - Zinc - IS 3685:1966)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- v (Ref. Cl 7.1 -Table 1 of IS 6528 : 1995)(Chemical composition - Carbon - IS 228)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- v (Ref. Cl 7.1 -Table 1 of IS 6528 : 1995)(Chemical composition - Silicon - IS 228)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- v (Ref. Cl 7.1 -Table 1 of IS 6528 : 1995)(Chemical composition - Manganese - IS 228)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- v (Ref. Cl 7.1 -Table 1 of IS 6528 : 1995)(Chemical composition - Nickel - IS 228)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- v (Ref. Cl 7.1 -Table 1 of IS 6528 : 1995)(Chemical composition - Chromium - IS 228)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- v (Ref. Cl 7.1 -Table 1 of IS 6528 : 1995)(Chemical composition - Molybdenum - IS 228)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- v (Ref. Cl 7.1 -Table 1 of IS 6528 : 1995)(Chemical composition - Sulphur - IS 228)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
4.1 -Table 1-Pin- v (Ref. Cl 7.1 -Table 1 of IS 6528 : 1995)(Chemical composition - Phosphorous - IS 228)	-	0	Chemical composition testing for Flap and Pin Material is 4000/-.
3(TYPES)	-	200	-
5.1- Table 2,3,4,5 & Fig-1 & 2(Dimensions- Type of Hinge 1.Length 2.Breadth 3.Butt Dia 4.Pin Dia 5.Thickness of Flap)	-	800	-
5.1- Table 2,3,4,5 & Fig-1 & 2(Dimensions- 1. Holes for Screw Desination 2. No. of screw Holes)	-	200	-
5.2 ,Table 6(Tolerances-Tolerances on dimensions of hinges )	-	300	-
6.1(Manufacture- General)	-	200	-
6.2- Table 2,3,4,5 (Kunckles)	-	300	-
6.3(Screw Holes)	-	250	-
6.3.1- Table 2,3,4,5 & Fig-1 & 2(Screw Holes)	-	250	-
6.3.2- Table 2,3,4,5 (Number of Holes)	-	250	-
6.3.3 Fig-1(Position of Holes)	-	250	-
8.1(Packing - Each hinge shall be packed in card board boxes or in any other approved packing. The number of hinges in a package shall be as under)	-	250	-
8.2(Packing -Each Package shall bear the following Particulars)	-	250	-
7(Workmanship & Finish)	-	800	-
10(Marking)	-	200	-

15 May, 2027

-
Included w.e.f 10.07.2025

1482

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 13730 : Part 0 : Sec 1 (2018)

Specifications for particular types of winding wires: Part 0 general requirements: Sec 1 enamelled round copper wire (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	300	-
4.1(Conductor diameter)	-	300	-
4.2(Out of roundness of conductor)	-	300	-
4.3(Minimum increase in diameter due to the insulation and the bonding layer)	-	300	-
4.4(Maximum overall diameter)	-	300	-
5(Electrical resistance)	-	0	-
6(Elongation)	-	700	-
7(Springiness)	-	700	-
8.1(Mandrel winding test)	-	700	-
8.2(Stretching test)	-	700	-
8.3(Jerk test)	-	700	-
8.4(Peel test)	-	800	-
9(Heat shock)	-	800	-
10(Cut-through)	-	800	-
11(Resistance to abrasion)	-	700	-
12(Resistance to solvents)	-	800	-
13(Breakdown voltage)	-	0	-
13.1(General)	-	0	-
13.2(Nominal conductor diameters up to and including 0,100 mm)	-	0	-
13.3(Nominal conductor diameters over 0,100 mm up to and including 2,500 mm)	-	0	-
13.4(Nominal conductor diameters over 2,500 mm)	-	0	-
14(Continuity of insulation)	-	0	-
15(Temperature index)	-	0	-
16(Resistance to refrigerants)	-	800	-
17(Solderability)	-	0	-
18(Heat or solvent bonding)	-	0	-
19(Dielectric dissipation factor)	-	0	-
20(Resistance to transformer oil)	-	0	-
21(Loss of mass)	-	0	-
23(Pin hole test)	-	100	-
30(Packaging)	-	200	-

26 Jul, 2027

-
Included w.e.f.19.05.2025

1483

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 17550 : Part 1 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 1 General Requirements (First Revision)

230000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MARKING)	-	2000	-
8(MATERIALS, DESIGN, AND MANUFACTURE)	-	30000	-
9(Testing The Air Tightness Of Door Or Lid Seal(S))	-	8000	-
10(Testing The Opening Force Of Door(S) Or Lid(S))	-	7000	-
11(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S)	-	20000	-
12(Testing The Mechanical Strength Of Shelves And Similar Components)	-	8000	-
14(Ice-Making Test (If Applicable))	-	15000	-
15(Test For Absence Of Odour And Taste)	-	15000	-
16(Safety Requirements)	-	125000	-

23 Jun, 2028

-
Included w.e.f.29.05.2025

1484

CSMCRI - Analytical Testing and Evaluation Laboratory (CSIR-CSMCRI), Bhavnagar

7185714

IS 10500 (2012)

Drinking water - Specification (Second Revision)

41512 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.SL No.iii)of Table I(pH)	-	180	plus applicable government taxes. Presently 18% GST. CSIR-CSMCRI Management Council may revise charges from time-to-time
table 2 sl.no 9(Copper (as Cu), mg/l, Max)	-	5000	plus applicable government taxes. Presently 18% GST. CSIR-CSMCRI Management Council may revise charges from time-to-time
table 2 sl.no 12(Iron (as Fe), mg/l, Max)	-	5000	plus applicable government taxes. Presently 18% GST. CSIR-CSMCRI Management Council may revise charges from time-to-time
TABLE 3 sl no 1(Cadmium (as Cd), mg/l, Max)	-	5000	plus applicable government taxes. Presently 18% GST. CSIR-CSMCRI Management Council may revise charges from time-to-time
TABLE 3 sl no 3(Lead (as Pb), mg/l, Max)	-	5000	plus applicable government taxes. Presently 18% GST. CSIR-CSMCRI Management Council may revise charges from time-to-time
TABLE 3 sl no 6(Nickel (as Ni), mg/l, Max)	-	5000	plus applicable government taxes. Presently 18% GST. CSIR-CSMCRI Management Council may revise charges from time-to-time
TABLE 3 sl no 10(Total arsenic (as As), mg/l, Max)	-	5000	plus applicable government taxes. Presently 18% GST. CSIR-CSMCRI Management Council may revise charges from time-to-time
TABLE 3 sl no 11(Total chromium (as Cr), mg/l, Max)	-	5000	plus applicable government taxes. Presently 18% GST. CSIR-CSMCRI Management Council may revise charges from time-to-time

13 May, 2028

-
-

1485

FOOTWEAR DESIGN AND DEVELOPMENT INSTITUTE (FDDI), NOIDA

8112814

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.2.2(" Height of upper ")	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.2.3(Heel area)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.1.1(Construction of whole footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.1.2(Upper/outsole bond strength)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.1(Toe protection - general)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.2(Internal length)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.3(Width of toecap flange)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.6(Impact resistance)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.2.7(Compression resistance)	-	9	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.3(Leak proofness)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.4("Specific ergonomic features ")	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.7(Seam strength)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.3.8(Lead Content ( National Annex A))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.2(Thickness)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.3(Tear strength)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.6(Water vapour permeability and coefficient)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.7(Resistance to hydrolysis)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.5.2(Lining- Tear strength)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.5.3(Lining- Abrasion resistance)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.6.2(Tear strength of tongue)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.7.2(Water permeability of insock)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.2.1(Thickness of Outsole)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.2.2(Cleated area)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.2.3(Cleat height)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.3(Outsole- Tear strength)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.4(Outsole- Abrasion resistance)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.5(Outsole-Flexing resistance)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.8.7(Interlayer bond strength)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.2(Construction of perforation resistant insert)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.3.1(Heat insulation of outsole complex)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.3.2(Cold insulation of outsole complex)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.4(Energy absorption of seat region)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.5(Water resistance)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.6.1(Metatarsal protection - Construction)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.7(Ankle protection)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.8.2(Cut resistance footwear- design)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.8.3(Resistance to cutting)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.3(Upper — Water penetration and absorption)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.4.1(Resistance to hot contact - Outsole)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.4.3.2(Design of Ladder grip)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.4.3.4(Heel breast of Ladder grip)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 7("Marking ")	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 7("Marking ")	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 5.4.5(Flexing resistance)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.
Cl 6.2.9(Scuff cap)	-	0	For mechanical test (Basic test) 16500/- for chemical test 23450/- , For composite toe cap: 4500/- for any additional Test - testing charges will be extra.

31 May, 2028

-
Included w.e.f.18.06.2025

1486

JAWAHARLAL NEHRU ALUMINIUM RESEARCH DEVELOPMENT AND DESIGN CENTER, NAGPUR

7184804

IS 5484 (2023)

EC GRADE ALUMINIUM ROD PRODUCED BY CONTINUOUS CASTING AND ROLLING - SPECIFICATION

EC Grade

6200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	1200	-
Cl-9(Ultimate tensile strength and elongation)	-	1000	-
Cl-6.2(Chemical analysis of the material)	-	1200	-
Cl-10.1(Resistivity)	-	3000	-
Cl-10.1(electrical conductivity)	-	0	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	3000	-
Cl-11(Dimensions)	-	1000	-
CL 9(ULTIMATE TENSILE STRENGTH AND ELONGATION)	-	1000	-
CL 11(DIMENSIONS)	-	1000	-
9(Elongation)	-	1000	-

24 Apr, 2028

-
-

1487

JAWAHARLAL NEHRU ALUMINIUM RESEARCH DEVELOPMENT AND DESIGN CENTER, NAGPUR

7184804

IS 9997 (2023)

ALUMINIUM ALLOY REDRAW RODS FOR ELECTRICAL PURPOSES - SPECIFICATION

6200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7.1, Table-2 (i)(Silicon)	-	1200	-
Cl-7.1, Table-2 (ii)(Iron)	-	1200	-
Cl-7.1, Table-2 (iii)(Copper)	-	1200	-
Cl-7.1, Table-2 (iv)(Manganese)	-	1200	-
Cl-7.1, Table-2 (v)(Magnesium)	-	1200	-
Cl-7.1, Table-2 (vi)(Chromium)	-	1200	-
Cl-7.1, Table-2 (viii)(Boron)	-	1200	-
Cl-7.1, Table-2 (ix)(Vanadium + Titanium)	-	1200	-
Cl-7.1, Table-2 (x)(Other each)	-	1200	-
Cl-7.1, Table-2 (xi)(Others total)	-	1200	-
Cl-7.1, Table-2 (xii)(Aluminium)	-	0.00	-
Cl-8.1, Table-3(UTS (MPa))	-	1000	-
Cl-8.1, Table-3(Elongation (%) - On 250 mm gauge length)	-	1000	-
Cl-8.1, Table-3(Resistivity (micro ohm.cm) at 20 oC)	-	3000	-
Cl-9(Electrical resistivity)	-	3000	-
Cl-7.1, Table-2 (vii)(Zinc)	-	1200	-
Cl-10(Diameter and Permissible Variations)	-	1000	-

24 Apr, 2028

-
-

1488

JAWAHARLAL NEHRU ALUMINIUM RESEARCH DEVELOPMENT AND DESIGN CENTER, NAGPUR

7184804

IS 1285 (2002)

Wrought aluminium and aluminium alloys - Extruded round tube and hollow sections for general engineering purposes - Specification (Third Revision)

2200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7/a) Extruded round tube IS 2673(DIMENSIONS AND TOLERANCE-Extruded round tube - outside Dia or Inside Dia)	-	1000	-
7 of IS 1285 /a) Extruded round tube IS 2673(DIMENSIONS AND TOLERANCE-Extruded round tube - outside Dia or Inside Dia)	-	1000	-
7 of IS 1285 /a) Extruded round tube IS 2673(DIMENSIONS AND TOLERANCE-Extruded round tube - Wall thickness)	-	1000	-
7 of IS 1285 /a) Extruded round tube IS 2673(DIMENSIONS AND TOLERANCE-Extruded round tube - Allowable Deviation of Mean Diameter from Specified Diameter (Size Tolerance))	-	1000	-
7 of IS 1285 /a) Extruded round tube IS 2673(DIMENSIONS AND TOLERANCE-Extruded round tube - Allowabte Deviation of Diameter at Any Point from Specified Diameter (Ovality Tolcrance))	-	1000	-
7 of IS 1285 /a) Extruded round tube IS 2673(DIMENSIONS AND TOLERANCE-Extruded round tube -Straightness)	-	0	-
7 of IS 1285 /a) Extruded round tube IS 2673(DIMENSIONS AND TOLERANCE-Extruded round tube -Length)	-	1000	-
7 of IS 1285 / b) Extruded hollow sections IS 6477(DIMENSIONS AND TOLERANCE-Extruded hollow sections -SPECIFIED WIDTH or WIDTH ACROSS FLATS)	-	0	-
7 of IS 1285 / b) Extruded hollow sections IS 6477(DIMENSIONS AND TOLERANCE-Extruded hollow sections - Specified WIDTH or WIDTH ACROSS FLATS)	-	1000	-
7 of IS 1285 / b) Extruded hollow sections IS 6477(DIMENSIONS AND TOLERANCE-Extruded hollow sections - Specified WIDTH or WIDTH ACROSS FLATS)	-	1000	-
7 of IS 1285 / b) Extruded hollow sections IS 6477(DIMENSIONS AND TOLERANCE-Extruded hollow sections -SPECIFIED Wall thickness)	-	1000	-
7 of IS 1285 / b) Extruded hollow sections IS 6477(DIMENSIONS AND TOLERANCE-Extruded hollow sections - Lengths)	-	1000	-
7 of IS 1285 / b) Extruded hollow sections IS 6477(DIMENSIONS AND TOLERANCE-Extruded hollow sections -Straightness)	-	0	-
7 of IS 1285 / b) Extruded hollow sections IS 6477(DIMENSIONS AND TOLERANCE-Extruded hollow sections -Straightness)	-	0	-
7 of IS 1285 / b) Extruded hollow sections IS 6477(DIMENSIONS AND TOLERANCE-Extruded hollow sections -Flatness)	-	0	-
7 of IS 1285 / b) Extruded hollow sections IS 6477(DIMENSIONS AND TOLERANCE-Extruded hollow sections -Twist)	-	0	-
7 of IS 1285 / b) Extruded hollow sections IS 6477(DIMENSIONS AND TOLERANCE-Extruded hollow sections -Twist)	-	0	-
7 of IS 1285 / b) Extruded hollow sections IS 6477(Extruded hollow sections -Twist -Permissible Twist in Total Length of piece- degrees)	-	0	-
7 of IS 1285 / b) Extruded hollow sections IS 6477(Extruded hollow sections -Twist -Permissible Twist in Total Length of piece- At extremetiy)	-	0	-
7 of IS 1285 / b) Extruded hollow sections IS 6477("Extruded hollow sections -Twist -ALLOWABLE DEVIATION FROM SPECIFIED ANGLE, DEGREES")	-	0	-
8(Chemical Composition - IS 1285)	-	1200	-
9(Mechanical Comp[osition -IS 1285)	-	1200	-
As per Clause 8 Table !(Aluminium)	-	1200	-
As per Clause 8 Table !(Copper)	-	1200	-
As per Clause 8 Table !(Magnesium)	-	1200	-
As per Clause 8 Table !(Silicon)	-	1200	-
As per Clause 8 Table !(Iron)	-	1200	-
As per Clause 8 Table !(Manganese)	-	1200	-
As per Clause 8 Table !(Zinc)	-	1200	-
As per Clause 8 Table !(Titanium)	-	1200	-
As per Clause 8 Table !(Chromium)	-	1200	-
7 of IS 1285 / b) Extruded hollow sections IS 6477(Extruded hollow sections -Twist -Permissible Twist, Maximum allowable in Total Length- degrees)	-	0	-
7 of IS 1285 / b) Extruded hollow sections IS 6477(Extruded hollow sections -Twist -Permissible Twist Maximum allowable in Total Length- At extremetiy)	-	0	-

24 Apr, 2028

-
-

1489

Standard Testing Laboratory Private Limited

8170106

IS 6603 (2024)

Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars â Specification (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl - 9.1,9.5,13.2(Thickness or Diameter)	-	10000	-
Cl - 9.1,9.5,13.2(Proof Strength Rp 0.2 MP)	-	10000	-
Cl - 9.1,9.5,13.2(Proof Strength Rp 1.0 MP)	-	10000	-
Cl - 9.1,9.5,13.2(Tensile Strength)	-	10000	-
Cl - 9.1,9.5,13.2(Elongation After Fracture Long.)	-	10000	-
Cl - 9.1,9.5,13.2(Elongation After Fracture Tr.)	-	10000	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Long.)	-	10000	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Tr.)	-	10000	-
Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Delivery Condition)	-	10000	-
Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Sensitized Condition)	-	10000	-
Cl - 9.1,9.5,13.2(Hardness)	-	10000	-
Cl - 9.1,9.5,13.2(Elongation After Fracture)	-	10000	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter)	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter)	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	10000	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 450 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 500 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 550 Deg. C)	-	10000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 100 Deg. C.)	-	10000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 150 Deg. C.)	-	10000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 200 Deg. C.)	-	10000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 250 Deg. C.)	-	10000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 300 Deg. C.)	-	10000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 350 Deg. C.)	-	10000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 400 Deg. C.)	-	10000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 450 Deg. C.)	-	10000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 550 Deg. C.)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	10000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	10000	-
Cl-7.1, 7.2(C)	-	10000	-
Cl-7.1, 7.2(Si)	-	10000	-
Cl-7.1, 7.2(Mn)	-	10000	-
Cl-7.1, 7.2(P)	-	10000	-
Cl-7.1, 7.2(S)	-	10000	-
Cl-7.1, 7.2(Cr)	-	10000	-
Cl-7.1, 7.2(Mo)	-	10000	-
Cl-7.1, 7.2(Ni)	-	10000	-
Cl-7.1, 7.2(N)	-	10000	-
Cl-7.1, 7.2(Cu)	-	10000	-
Cl-7.1, 7.2(Ti)	-	10000	-
Cl-7.1, 7.2(W)	-	10000	-
Cl-7.1, 7.2(Nb)	-	10000	-
cL-7.1, 7.2(Co)	-	10000	-
Cl-7.1, 7.2(Ti: (C + N))	-	10000	-
Cl-7.1, 7.2(V)	-	10000	-
Cl-7.1, 7.2(Al)	-	10000	-
Cl-7.1, 7.2(Boron)	-	10000	-
Cl-7.1, 7.2(Tungsten)	-	10000	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1((Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.))	-	10000	-
Cl 6((freedom from defects))	-	10000	-
Cl. 12((dimension and tolerance))	-	10000	-
Cl. 14((corrosion resistance))	-	10000	-

10 Apr, 2028

-
Included w.e.f 05.05.2025

1490

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 15410 (2025)

PLASTIC BOTTLES/CONTAINERS FOR PACKAGING OF NATURAL MINERAL WATER AND PACKAGED DRINKING WATER - SPECIFICATION (first revision)

All Type and Sizes

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1.1(Materials for Primary Packaging (Container))	-	350	NA
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	1500	NA
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	350	NA
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	1800	NA
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	50	NA
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	50	NA
Clause 4.2(Design, Shape and Dimensions)	-	150	NA
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	150	NA
Clause 4.4(Capacity (Nominal))	-	200	NA
Clause 4.4(Capacity (Brimfull))	-	400	NA
Clause 4.5(Wall Thickness Top)	-	250	NA
Clause 4.5(Wall Thickness Middle)	-	250	NA
Clause 4.5(Wall Thickness Bottom)	-	250	NA
Clause 4.6.1.1(Colour-Transparency)	-	550	NA
Clause 4.6.1.2(Colour-Tint)	-	50	NA
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	350	NA
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	650	NA
Clause 4.6.3.1(Drop Impact test)	-	450	NA
Clause 4.6.3.2(Stack Load test)	-	550	NA
Clause 4.6.4.1(Overall Migration Container)	-	3000	NA
Clause 4.6.4.1(Overall Migration Closure)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Barium)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Copper)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Iron)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Lithium)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Manganese)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Zinc)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Antimony)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Barium)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Copper)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Iron)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	3000	NA
Clause 4.6.4.3(Colour migration Container)	-	1500	NA
Clause 4.6.4.3(Colour migration Closure)	-	1500	NA
Clause 4.6.5(Water Potability Test (Taste))	-	1500	NA
Clause 4.6.5(Water Potability Test (odour))	-	1500	NA
Clause 5.1(Marking)	-	500	NA
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	3000	this test will be done if separate ink/colourant is provided with tha sample and extra testing charges of 4500 will be charged
Clause 4.1.1(Materials for Primary Packaging (Container))	-	350	NA
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	1500	NA
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	350	NA
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	1800	NA
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	50	NA
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	50	NA
Clause 4.2(Design, Shape and Dimensions)	-	150	NA
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	150	NA
Clause 4.4(Capacity (Nominal))	-	200	NA
Clause 4.4(Capacity (Brimfull))	-	400	NA
Clause 4.5(Wall Thickness Top)	-	250	NA
Clause 4.5(Wall Thickness Middle)	-	250	NA
Clause 4.5(Wall Thickness Bottom)	-	250	NA
Clause 4.6.1.1(Colour-Transparency)	-	550	NA
Clause 4.6.1.2(Colour-Tint)	-	50	NA
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	350	NA
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	650	NA
Clause 4.6.3.1(Drop Impact test)	-	450	NA
Clause 4.6.3.2(Stack Load test)	-	550	NA
Clause 4.6.4.1(Overall Migration Container)	-	3000	NA
Clause 4.6.4.1(Overall Migration Closure)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Barium)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Copper)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Iron)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Lithium)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Manganese)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Zinc)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Antimony)	-	3000	NA
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Barium)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Copper)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Iron)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	3000	NA
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	3000	NA
Clause 4.6.4.3(Colour migration Container)	-	1500	NA
Clause 4.6.4.3(Colour migration Closure)	-	1500	NA
Clause 4.6.5(Water Potability Test (Taste))	-	1500	NA
Clause 4.6.5(Water Potability Test (odour))	-	1500	NA
Clause 5.1(Marking)	-	500	NA
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	3000	this test will be done if separate ink/colourant is provided with tha sample and extra testing charges of 4500 will be charged

07 Feb, 2027

-
Included w.e.f.06.05.2025

1491

Sleen India Biz venture Private Limited, Agra

9139736

IS 17373 (2020)

Geosynthetics â€“ Geogrids used in reinforced soil retaining structures â€“ Specification

All type(Ultimate tensile strength upto 600 kN)

240000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1("Ultimate tensile strength- (MD/CD) IS- 16635 60/20 80/30 100/30 120/30 150/30 180/30 200/30 250/30 300/30 350/30 400/30")	-	4000	-
1("Elongation at designated load- IS 16635 MD CD")	-	1000	-
1("UV resistance, strength retained after 500 h exposure- IS 13162 (part-2)")	-	60000	-
1(Chemical resistance, strength retained after 72 h immersion- IS 17363)	-	30000	-
1(Width)	-	500	-
1(Roll Length)	-	500	-
2("Ultimate tensile strength - IS 16635 MD/CD 30/5 40/5 50/5 60/5 70/5 80/5 90/5 100/5 120/5 120/5 150/5 175/5 200/5")	-	0	Ultimate tensile test price is 4000/-.
2("Elongation at designated load - IS 16635 MD and CD")	-	0	Elongation test price is 1000/-.
2("UV resistance, strength retained after 500 h exposure- IS 13162 (part-2)")	-	0	UV resistance test price is 60,000/-.
2(Chemical resistance, strength retained after 72 h immersion- IS 17363)	-	0	Chemical resistance price is 30,000/-.
2(Width)	-	0	Test price for width measurement is 500/-.
2(Roll Length)	-	0	Test price for roll length measurement is 500/-.
3("Ultimate tensile strength - IS 16635 MD/CD 50 100 150 200 250 300 350 400 500 600 700 800 900 1000 1100 1200 1300")	-	0	Ultimate tensile test price is 4000/-.
3("Elongation at designated load - IS 16635 MD and CD")	-	0	Elongation test price is 1000/-.
3("UV resistance, strength retained after 500 h exposure- IS 13162 (part-2)")	-	0	UV resistance test price is 60,000/-.
3(Chemical resistance, strength retained after 72 h immersion- IS 17363)	-	0	Chemical resistance price is 30,000/-.
3(Width)	-	0	Test price for width measurement is 500/-.
3(Roll Length)	-	0	Test price for roll length measurement is 500/-.
Clause 6.2, Table 1, 2 and 3, SI. No. (i)(Ultimate Tensile Strength,)	-	0	Ultimate tensile test price is 4000/-.
Clause 6.2, Table 1, 2 and 3, SI. No. (ii)(Elongation at Designated Load)	-	0	Elongation test price is 1000/-.
Clause 6.2, Table 1, 2 and 3, SI. No. (iii)(UV resistance, strength retained after 500 h exposure)	-	0	UV resistance test price is 60,000/-.
Clause 6.2, Table 1, 2 and 3, SI. No. (iv)(Chemical resistance, strength retained after 72 h immersion)	-	0	Chemical resistance price is 30,000/-.
Clause 6.2, Table 1, 2 and 3, SI. No. (v)(Width)	-	0	Test price for width measurement is 500/-.
Clause 6.2, Table 1, 2 and 3, SI. No. (vi)(Roll length)	-	0	Test price for roll length measurement is 500/-.
Clause No. 8(Thickness)	-	500	-
Clause No. 9.1(Geostrip identification)	-	3000	-
CL 3.2(Aperature Size)	-	500	-
6.2 Table 1("Chemical resistance, strength retained after 72 h immersion (percent)")	-	0	Chemical resistance price is 30,000/-.
CL 6.3.3(Resistance to hydrolysis)	-	10000	-
6.2 Table 1(UV resistance strength retained after 500h exposure (Percent))	-	0	UV resistance test price is 60,000/-.
CL 6.3.2(Resistance to oxidation)	-	20000	-
CL 6.3.3(Resistance to Creep)	-	10000	-
CL 5.1(Carbon black content)	-	3000	-
CL 5.2(Number Average Molecular weight)	-	5000	-
CL 5.2(CEG content)	-	5000	-
6.2 Table 1(Ultimate Tensile Strength kN/m (MD))	-	0	Ultimate tensile test price is 4000/-.
6.2 Table 1(Ultimate Tensile Strength kN/m (CD))	-	0	Ultimate tensile test price is 4000/-.
6.2 Table 1(Elongation at designated load (Percentage))	-	0	Elongation test price is 1000/-.
6.2 Table 1(Elongation at designated load (Percentage))	-	0	Elongation test price is 1000/-.
6.2 Table 1(Width (m))	-	0	Test price for width measurement is 500/-.
6.2 Table 1(Roll length (m))	-	0	Test price for roll length measurement is 500/-.
CL 5.1(Identification of material)	-	5000	-
CL 6.1(Geogrid should be Dimensionally stable)	-	1000	-
4(TYPES OF GEOGRIDS - a) Type 1 b) Type 2 c) Type 3)	-	500	-
5.1("MATERIALS - Geogrid materials shall be inert to all chemicals naturally found in commonly encountered soils not containing adverse solvents and at ambient temperatures")	-	5000	-
5.2("MATERIALS - PET geogrips shall have average molecular weight more than or equal to 25000 g/mol and shall have carboxyl end group content less than 30 mmol/kg")	-	5000	-
6.1(REQUIREMENTS FOR GEOGRIDS - Geogrids shall be dimensionally stable and able to retain their geometry under manufacture,transport, and installation)	-	1000	-
6.2-Table 1- i)(Requirements of Geogrids - Ultimate tensile strength)	-	0	Ultimate tensile test price is 4000/-.
6.2 - Table 1- ii)(Requirements of Geogrids - Elongation at designated load)	-	0	Elongation test price is 1000/-.
6.2 - Table 1- iii)(Requirements of Geogrids - UV resistance, strength retained after 500 h exposure)	-	0	UV resistance test price is 60,000/-.
6.2 - Table 1- iv)(Requirements of Geogrids - Chemical resistance, strength retained after 72 h immersion)	-	0	Chemical resistance price is 30,000/-.
6.2 - Table 1- v)(Requirements of Geogrids - Width)	-	0	Test price for width measurement is 500/-.
6.2 - Table 1- vi)(Requirements of Geogrids - Length)	-	0	Test price for roll length measurement is 500/-.
6.2 - Table 1- i)(Requirements of Geogrids - Ultimate tensile strength)	-	0	Ultimate tensile test price is 4000/-.
6.2-Table 2- ii)(Requirements of Geogrids - Elongation at designated load)	-	0	Elongation test price is 1000/-.
6.2 - Table 2- iii)(Requirements of Geogrids - UV resistance, strength retained after 500 h exposure)	-	0	UV resistance test price is 60,000/-.
6.2 - Table 2- iv)(Requirements of Geogrids - Chemical resistance, strength retained after 72 h immersion)	-	0	Chemical resistance price is 30,000/-.
6.2 - Table 2- v)(Requirements of Geogrids - Width)	-	0	Test price for width measurement is 500/-.
6.2 - Table 2- vi)(Requirements of Geogrids - Length)	-	0	Test price for roll length measurement is 500/-.
6.3.2(Reduction factor for durability is dependent on susceptibility of geogrid to attach by chemicals, thermal oxidation, hydrolysis, environmental stress cracking and micro-organisms)	-	0	Test price for cl. 6.3.2 is 20000/-.
6.3.3(Reduction factor for creep shall be based on creep tests)	-	0	Test price for cl. 6.3.3 is 10000/-.
7(MARKING AND LABELLING)	-	500	-
8(PACKING)	-	500	-
1("Ultimate tensile strength- (MD/CD) IS- 16635 60/20 80/30 100/30 120/30 150/30 180/30 200/30 250/30 300/30 350/30 400/30")	-	0	-
1("Elongation at designated load- IS 16635 MD CD")	-	0	-
1("UV resistance, strength retained after 500 h exposure- IS 13162 (part-2)")	-	0	-
1(Chemical resistance, strength retained after 72 h immersion- IS 17363)	-	0	-
1(Width)	-	0	-
1(Roll Length)	-	0	-
2("Ultimate tensile strength - IS 16635 MD/CD 30/5 40/5 50/5 60/5 70/5 80/5 90/5 100/5 120/5 120/5 150/5 175/5 200/5")	-	0	-
2("Elongation at designated load - IS 16635 MD and CD")	-	0	-
2("UV resistance, strength retained after 500 h exposure- IS 13162 (part-2)")	-	0	-
2(Chemical resistance, strength retained after 72 h immersion- IS 17363)	-	0	-
2(Width)	-	0	-
2(Roll Length)	-	0	-
3("Ultimate tensile strength - IS 16635 MD/CD 50 100 150 200 250 300 350 400 500 600 700 800 900 1000 1100 1200 1300")	-	0	-
3("Elongation at designated load - IS 16635 MD and CD")	-	0	-
3("UV resistance, strength retained after 500 h exposure- IS 13162 (part-2)")	-	0	-
3(Chemical resistance, strength retained after 72 h immersion- IS 17363)	-	0	-
3(Width)	-	0	-
3(Roll Length)	-	0	-
Clause 6.2, Table 1, 2 and 3, SI. No. (i)(Ultimate Tensile Strength,)	-	0	-
Clause 6.2, Table 1, 2 and 3, SI. No. (ii)(Elongation at Designated Load)	-	0	-
Clause 6.2, Table 1, 2 and 3, SI. No. (iii)(UV resistance, strength retained after 500 h exposure)	-	0	-
Clause 6.2, Table 1, 2 and 3, SI. No. (iv)(Chemical resistance, strength retained after 72 h immersion)	-	0	-
Clause 6.2, Table 1, 2 and 3, SI. No. (v)(Width)	-	0	-
Clause 6.2, Table 1, 2 and 3, SI. No. (vi)(Roll length)	-	0	-
Clause No. 8(Thickness)	-	0	-
Clause No. 9.1(Geostrip identification)	-	0	-
CL 3.2(Aperature Size)	-	0	-
6.2 Table 1("Chemical resistance, strength retained after 72 h immersion (percent)")	-	0	-
CL 6.3.3(Resistance to hydrolysis)	-	0	-
6.2 Table 1(UV resistance strength retained after 500h exposure (Percent))	-	0	-
CL 6.3.2(Resistance to oxidation)	-	0	-
CL 6.3.3(Resistance to Creep)	-	0	-
CL 5.1(Carbon black content)	-	0	-
CL 5.2(Number Average Molecular weight)	-	0	-
CL 5.2(CEG content)	-	0	-
6.2 Table 1(Ultimate Tensile Strength kN/m (MD))	-	0	-
6.2 Table 1(Ultimate Tensile Strength kN/m (CD))	-	0	-
6.2 Table 1(Elongation at designated load (Percentage))	-	0	-
6.2 Table 1(Elongation at designated load (Percentage))	-	0	-
6.2 Table 1(Width (m))	-	0	-
6.2 Table 1(Roll length (m))	-	0	-
CL 5.1(Identification of material)	-	0	-
CL 6.1(Geogrid should be Dimensionally stable)	-	0	-
4(TYPES OF GEOGRIDS - a) Type 1 b) Type 2 c) Type 3)	-	0	-
5.1("MATERIALS - Geogrid materials shall be inert to all chemicals naturally found in commonly encountered soils not containing adverse solvents and at ambient temperatures")	-	0	-
5.2("MATERIALS - PET geogrips shall have average molecular weight more than or equal to 25000 g/mol and shall have carboxyl end group content less than 30 mmol/kg")	-	0	-
6.1(REQUIREMENTS FOR GEOGRIDS - Geogrids shall be dimensionally stable and able to retain their geometry under manufacture,transport, and installation)	-	0	-
6.2-Table 1- i)(Requirements of Geogrids - Ultimate tensile strength)	-	0	-
6.2 - Table 1- ii)(Requirements of Geogrids - Elongation at designated load)	-	0	-
6.2 - Table 1- iii)(Requirements of Geogrids - UV resistance, strength retained after 500 h exposure)	-	0	-
6.2 - Table 1- iv)(Requirements of Geogrids - Chemical resistance, strength retained after 72 h immersion)	-	0	-
6.2 - Table 1- v)(Requirements of Geogrids - Width)	-	0	-
6.2 - Table 1- vi)(Requirements of Geogrids - Length)	-	0	-
6.2 - Table 1- i)(Requirements of Geogrids - Ultimate tensile strength)	-	0	-
6.2-Table 2- ii)(Requirements of Geogrids - Elongation at designated load)	-	0	-
6.2 - Table 2- iii)(Requirements of Geogrids - UV resistance, strength retained after 500 h exposure)	-	0	-
6.2 - Table 2- iv)(Requirements of Geogrids - Chemical resistance, strength retained after 72 h immersion)	-	0	-
6.2 - Table 2- v)(Requirements of Geogrids - Width)	-	0	-
6.2 - Table 2- vi)(Requirements of Geogrids - Length)	-	0	-
6.3.2(Reduction factor for durability is dependent on susceptibility of geogrid to attach by chemicals, thermal oxidation, hydrolysis, environmental stress cracking and micro-organisms)	-	0	-
6.3.3(Reduction factor for creep shall be based on creep tests)	-	0	-
7(MARKING AND LABELLING)	-	0	-
8(PACKING)	-	0	-

15 May, 2027

-
Included w.e.f.19.05.2025 Exclusion CL 6.3.2 (Installation damage) CL 6.3.2 (Resistance to Micro organisms) 6.3.1 (Reduction factor for installation damage shall be determined based on actual installation damage test)

1492

Standard Testing Laboratory Private Limited

8170106

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	11000	-
Clause.4.0(Carbon)	-	11000	-
Clause.4.0(Sulphur)	-	11000	-
Clause.4.0(Sulphur)	-	11000	-
Clause.4.0(Phosphorus)	-	11000	-
Clause.4.0(Silicon)	-	11000	-
Clause.4.0(Manganese)	-	11000	-
Clause.5.0(Supply of Material)	-	11000	-
Clause.5.0(Supply of Material)	-	11000	-
Clause.6.0(Workmanship)	-	11000	-
Clause.7.0(Straightness)	-	11000	-
Clause.8.0(Basis of Calculation)	-	11000	-
Clause.9.0(Length)	-	11000	-
Clause.10.0(Dimensions and properties)	-	11000	-
Clause.10.0(Dimensions and properties)	-	11000	-
Clause.11.0(General)	-	11000	-
Clause.11.0(Outside Dimension)	-	11000	-
Clause.11.0(Thickness)	-	11000	-
Clause.11.0(Thickness)	-	11000	-
Clause.11.0(Concavity and Convexity)	-	11000	-
Clause.11.0(Squareness of Sides)	-	11000	-
Clause.11.0(External Corner Radiius)	-	11000	-
Clause.11.0(Straightness and twist)	-	11000	-
Clause.12.0(Dimension Tolerances)	-	11000	-
Clause.12.0(Dimension Tolerances)	-	11000	-
Clause.13.0(Surface Protection)	-	11000	-
Clause.14.0(Testing)	-	11000	-
Clause.15.0(Tensile test)	-	11000	-
Clause.15.0(Yield strength)	-	11000	-
Clause.15.0(Elognation Percent)	-	11000	-
Clause.18.0(Marking)	-	11000	-
6(Workmanship)	-	11000	-
10(Dimensions and Properties)	-	11000	-
11(Measurement of Shape and Size)	-	11000	-
12(Dimensions and Tolerances)	-	11000	-
13(Surface Protection)	-	11000	-
15(Tensile Test)	-	11000	-
Clause. 3.0(Types)	-	-	-
Clause.4.0(Carbon)	-	-	-
Clause.4.0(Sulphur)	-	-	-
Clause.4.0(Sulphur)	-	-	-
Clause.4.0(Phosphorus)	-	-	-
Clause.4.0(Silicon)	-	-	-
Clause.4.0(Manganese)	-	-	-
Clause.5.0(Supply of Material)	-	-	-
Clause.5.0(Supply of Material)	-	-	-
Clause.6.0(Workmanship)	-	-	-
Clause.7.0(Straightness)	-	-	-
Clause.8.0(Basis of Calculation)	-	-	-
Clause.9.0(Length)	-	-	-
Clause.10.0(Dimensions and properties)	-	-	-
Clause.10.0(Dimensions and properties)	-	-	-
Clause.11.0(General)	-	-	-
Clause.11.0(Outside Dimension)	-	-	-
Clause.11.0(Thickness)	-	-	-
Clause.11.0(Thickness)	-	-	-
Clause.11.0(Concavity and Convexity)	-	-	-
Clause.11.0(Squareness of Sides)	-	-	-
Clause.11.0(External Corner Radiius)	-	-	-
Clause.11.0(Straightness and twist)	-	-	-
Clause.12.0(Dimension Tolerances)	-	-	-
Clause.12.0(Dimension Tolerances)	-	-	-
Clause.13.0(Surface Protection)	-	-	-
Clause.14.0(Testing)	-	-	-
Clause.15.0(Tensile test)	-	-	-
Clause.15.0(Yield strength)	-	-	-
Clause.15.0(Elognation Percent)	-	-	-
Clause.18.0(Marking)	-	-	-
6(Workmanship)	-	-	-
10(Dimensions and Properties)	-	-	-
11(Measurement of Shape and Size)	-	-	-
12(Dimensions and Tolerances)	-	-	-
13(Surface Protection)	-	-	-
15(Tensile Test)	-	-	-

10 Apr, 2028

-
Included w.e.f 05.05.2025

1493

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1115 (1986)

Specification for general purpose cutting oil, soluble (Second Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General Requirement)	-	800	-
2.2 - Table 1 - (i)(Ash, Max)	-	700	-
2.2 - Table 1 - (ii)(Water, Max)	-	1000	-
2.2 - Table 1 - (iii)(Emulsion rest, ppm)	-	1500	-
2.2 - Table 1 - (iv)(Frothing test)	-	1000	-
2.2 - Table 1 - (v)(Cast iron corrosion test, Max)	-	2500	-
2.2 - Table 1 - (vi)(Copper strip corrosion test)	-	2500	-
2.2 - Table 1 - (vii)(Thermal Stability test)	-	2000	-
2.2 - Table 1 - (viii)(Flash point)	-	1000	-
2.2 - Table 1 - (ix)(Viscosity, Min)	-	2000	-
2.2 - Table 1 - (x)(Volatile Matter, Max)	-	1000	-
3(Packing and Marking)	-	500	-
2.1(General Requirement)	-	0	-
2.2 - Table 1 - (i)(Ash, Max)	-	0	-
2.2 - Table 1 - (ii)(Water, Max)	-	0	-
2.2 - Table 1 - (iii)(Emulsion rest, ppm)	-	0	-
2.2 - Table 1 - (iv)(Frothing test)	-	0	-
2.2 - Table 1 - (v)(Cast iron corrosion test, Max)	-	0	-
2.2 - Table 1 - (vi)(Copper strip corrosion test)	-	0	-
2.2 - Table 1 - (vii)(Thermal Stability test)	-	0	-
2.2 - Table 1 - (viii)(Flash point)	-	0	-
2.2 - Table 1 - (ix)(Viscosity, Min)	-	0	-
2.2 - Table 1 - (x)(Volatile Matter, Max)	-	0	-
3(Packing and Marking)	-	0	-
2.1(General Requirement)	-	0	-
2.2 - Table 1 - (i)(Ash, Max)	-	0	-
2.2 - Table 1 - (ii)(Water, Max)	-	0	-
2.2 - Table 1 - (iii)(Emulsion rest, ppm)	-	0	-
2.2 - Table 1 - (iv)(Frothing test)	-	0	-
2.2 - Table 1 - (v)(Cast iron corrosion test, Max)	-	0	-
2.2 - Table 1 - (vi)(Copper strip corrosion test)	-	0	-
2.2 - Table 1 - (vii)(Thermal Stability test)	-	0	-
2.2 - Table 1 - (viii)(Flash point)	-	0	-
2.2 - Table 1 - (ix)(Viscosity, Min)	-	0	-
2.2 - Table 1 - (x)(Volatile Matter, Max)	-	0	-
3(Packing and Marking)	-	0	-
2.1(General Requirement)	-	0	-
2.2 - Table 1 - (i)(Ash, Max)	-	0	-
2.2 - Table 1 - (ii)(Water, Max)	-	0	-
2.2 - Table 1 - (iii)(Emulsion rest, ppm)	-	0	-
2.2 - Table 1 - (iv)(Frothing test)	-	0	-
2.2 - Table 1 - (v)(Cast iron corrosion test, Max)	-	0	-
2.2 - Table 1 - (vi)(Copper strip corrosion test)	-	0	-
2.2 - Table 1 - (vii)(Thermal Stability test)	-	0	-
2.2 - Table 1 - (viii)(Flash point)	-	0	-
2.2 - Table 1 - (ix)(Viscosity, Min)	-	0	-
2.2 - Table 1 - (x)(Volatile Matter, Max)	-	0	-
3(Packing and Marking)	-	0	-
2.1(General Requirement)	-	0	-
2.2 - Table 1 - (i)(Ash, Max)	-	0	-
2.2 - Table 1 - (ii)(Water, Max)	-	0	-
2.2 - Table 1 - (iii)(Emulsion rest, ppm)	-	0	-
2.2 - Table 1 - (iv)(Frothing test)	-	0	-
2.2 - Table 1 - (v)(Cast iron corrosion test, Max)	-	0	-
2.2 - Table 1 - (vi)(Copper strip corrosion test)	-	0	-
2.2 - Table 1 - (vii)(Thermal Stability test)	-	0	-
2.2 - Table 1 - (viii)(Flash point)	-	0	-
2.2 - Table 1 - (ix)(Viscosity, Min)	-	0	-
2.2 - Table 1 - (x)(Volatile Matter, Max)	-	0	-
3(Packing and Marking)	-	0	-

26 Jul, 2027

-
Included w.e.f.29.05.2025

1494

Sleen India Biz venture Private Limited, Agra

9139736

IS 16090 (2013)

Geo-synthetics – Geo-textiles used as protection (or cushioning) materials – Specification

All type

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4, Table 1, (i)(Mass per unit area, g/m2)	-	1000	-
4.4, Table 1, (ii)(Tensile strength, kN/m)	-	5000	-
4.4, Table 1, (iii)(Trapezoidal tear strength, kN)	-	5000	-
4.5, Table 1, (iv)(CBR puncture resistance, kN)	-	5000	-
4.6, Table 1, (v)(Maximum UV resistance (after 500 h exposure), percent)	-	120000	-
6.2(Sampling)	-	1000	-
7(Packing)	-	1000	-
9.1(Identification)	-	6000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
4.3(Carbon black content and carbon black dispersion test)	-	5000	-
4.4, Table 1, (i)(Mass per unit area, g/m2)	-	0	-
4.4, Table 1, (ii)(Tensile strength, kN/m)	-	0	-
4.4, Table 1, (iii)(Trapezoidal tear strength, kN)	-	0	-
4.5, Table 1, (iv)(CBR puncture resistance, kN)	-	0	-
4.6, Table 1, (v)(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
6.2(Sampling)	-	0	-
7(Packing)	-	0	-
9.1(Identification)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
4.3(Carbon black content and carbon black dispersion test)	-	0	-
4.4, Table 1, (i)(Mass per unit area, g/m2)	-	0	-
4.4, Table 1, (ii)(Tensile strength, kN/m)	-	0	-
4.4, Table 1, (iii)(Trapezoidal tear strength, kN)	-	0	-
4.5, Table 1, (iv)(CBR puncture resistance, kN)	-	0	-
4.6, Table 1, (v)(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
6.2(Sampling)	-	0	-
7(Packing)	-	0	-
9.1(Identification)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
4.3(Carbon black content and carbon black dispersion test)	-	0	-
4.4, Table 1, (i)(Mass per unit area, g/m2)	-	0	-
4.4, Table 1, (ii)(Tensile strength, kN/m)	-	0	-
4.4, Table 1, (iii)(Trapezoidal tear strength, kN)	-	0	-
4.5, Table 1, (iv)(CBR puncture resistance, kN)	-	0	-
4.6, Table 1, (v)(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
6.2(Sampling)	-	0	-
7(Packing)	-	0	-
9.1(Identification)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
4.3(Carbon black content and carbon black dispersion test)	-	0	-

15 May, 2027

-
Included w.e.f 02.06.2025

1495

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1997 (2008)

Laboratory glassware - Burettes (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Markings )	-	12000	For complete testing
5.1(Class of Accuracy)	-	12000	For complete testing
5.2(Types)	-	12000	For complete testing
6.1(Maximum permissible errors)	-	12000	For complete testing
8(Construction)	-	12000	For complete testing
Table 2(i) Scale length )	-	12000	For complete testing
Table 3( ii) Overall length )	-	12000	For complete testing
Table 4(iii) Distance of Zero line from top of burette )	-	12000	For complete testing
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	12000	For complete testing
Table 6(v) Length of tube of uniform bore below graduation line )	-	12000	For complete testing
Table 7(vi) Distance of end of jet from underside of stopcock )	-	12000	For complete testing
8.2( c) Top of burette )	-	12000	For complete testing
8.3(d) Stopcock and similar devices)	-	12000	For complete testing
8.4(e) Stop Cock Leakage)	-	12000	For complete testing
8.5( f) Delivery jet)	-	12000	For complete testing
8.6(g) Delivery time )	-	12000	For complete testing
8.6(g) Delivery time )	-	12000	For complete testing
9(Graduations, figuring and patterns )	-	12000	For complete testing
9.1(a) Graduations patterns )	-	12000	For complete testing
9.2(Position of graduation line)	-	12000	For complete testing
9.3(c) Marking of graduation lines )	-	12000	For complete testing
12(. Visibility of graduation line)	-	12000	For complete testing
11(Markings )	-	12000	For complete testing
5.1(Class of Accuracy)	-	12000	For complete testing
5.2(Types)	-	12000	For complete testing
6.1(Maximum permissible errors)	-	12000	For complete testing
8(Construction)	-	12000	For complete testing
Table 2(i) Scale length )	-	12000	For complete testing
Table 3( ii) Overall length )	-	12000	For complete testing
Table 4(iii) Distance of Zero line from top of burette )	-	12000	For complete testing
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	12000	For complete testing
Table 6(v) Length of tube of uniform bore below graduation line )	-	12000	For complete testing
Table 7(vi) Distance of end of jet from underside of stopcock )	-	12000	For complete testing
8.2( c) Top of burette )	-	12000	For complete testing
8.3(d) Stopcock and similar devices)	-	12000	For complete testing
8.4(e) Stop Cock Leakage)	-	12000	For complete testing
8.5( f) Delivery jet)	-	12000	For complete testing
8.6(g) Delivery time )	-	12000	For complete testing
8.6(g) Delivery time )	-	12000	For complete testing
9(Graduations, figuring and patterns )	-	12000	For complete testing
9.1(a) Graduations patterns )	-	12000	For complete testing
9.2(Position of graduation line)	-	12000	For complete testing
9.3(c) Marking of graduation lines )	-	12000	For complete testing
12(. Visibility of graduation line)	-	12000	For complete testing
11(Markings )	-	12000	For complete testing
5.1(Class of Accuracy)	-	12000	For complete testing
5.2(Types)	-	12000	For complete testing
6.1(Maximum permissible errors)	-	12000	For complete testing
8(Construction)	-	12000	For complete testing
Table 2(i) Scale length )	-	12000	For complete testing
Table 3( ii) Overall length )	-	12000	For complete testing
Table 4(iii) Distance of Zero line from top of burette )	-	12000	For complete testing
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	12000	For complete testing
Table 6(v) Length of tube of uniform bore below graduation line )	-	12000	For complete testing
Table 7(vi) Distance of end of jet from underside of stopcock )	-	12000	For complete testing
8.2( c) Top of burette )	-	12000	For complete testing
8.3(d) Stopcock and similar devices)	-	12000	For complete testing
8.4(e) Stop Cock Leakage)	-	12000	For complete testing
8.5( f) Delivery jet)	-	12000	For complete testing
8.6(g) Delivery time )	-	12000	For complete testing
8.6(g) Delivery time )	-	12000	For complete testing
9(Graduations, figuring and patterns )	-	12000	For complete testing
9.1(a) Graduations patterns )	-	12000	For complete testing
9.2(Position of graduation line)	-	12000	For complete testing
9.3(c) Marking of graduation lines )	-	12000	For complete testing
12(. Visibility of graduation line)	-	12000	For complete testing
7(Material)	-	12000	For complete testing
11(Markings )	-	-	-
5.1(Class of Accuracy)	-	-	-
5.2(Types)	-	-	-
6.1(Maximum permissible errors)	-	-	-
8(Construction)	-	-	-
Table 2(i) Scale length )	-	-	-
Table 3( ii) Overall length )	-	-	-
Table 4(iii) Distance of Zero line from top of burette )	-	-	-
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	-	-
Table 6(v) Length of tube of uniform bore below graduation line )	-	-	-
Table 7(vi) Distance of end of jet from underside of stopcock )	-	-	-
8.2( c) Top of burette )	-	-	-
8.3(d) Stopcock and similar devices)	-	-	-
8.4(e) Stop Cock Leakage)	-	-	-
8.5( f) Delivery jet)	-	-	-
8.6(g) Delivery time )	-	-	-
8.6(g) Delivery time )	-	-	-
9(Graduations, figuring and patterns )	-	-	-
9.1(a) Graduations patterns )	-	-	-
9.2(Position of graduation line)	-	-	-
9.3(c) Marking of graduation lines )	-	-	-
12(. Visibility of graduation line)	-	-	-
11(Markings )	-	-	-
5.1(Class of Accuracy)	-	-	-
5.2(Types)	-	-	-
6.1(Maximum permissible errors)	-	-	-
8(Construction)	-	-	-
Table 2(i) Scale length )	-	-	-
Table 3( ii) Overall length )	-	-	-
Table 4(iii) Distance of Zero line from top of burette )	-	-	-
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	-	-
Table 6(v) Length of tube of uniform bore below graduation line )	-	-	-
Table 7(vi) Distance of end of jet from underside of stopcock )	-	-	-
8.2( c) Top of burette )	-	-	-
8.3(d) Stopcock and similar devices)	-	-	-
8.4(e) Stop Cock Leakage)	-	-	-
8.5( f) Delivery jet)	-	-	-
8.6(g) Delivery time )	-	-	-
8.6(g) Delivery time )	-	-	-
9(Graduations, figuring and patterns )	-	-	-
9.1(a) Graduations patterns )	-	-	-
9.2(Position of graduation line)	-	-	-
9.3(c) Marking of graduation lines )	-	-	-
12(. Visibility of graduation line)	-	-	-
11(Markings )	-	-	-
5.1(Class of Accuracy)	-	-	-
5.2(Types)	-	-	-
6.1(Maximum permissible errors)	-	-	-
8(Construction)	-	-	-
Table 2(i) Scale length )	-	-	-
Table 3( ii) Overall length )	-	-	-
Table 4(iii) Distance of Zero line from top of burette )	-	-	-
Table 5(iv) Distance of lowest graduation line from the top of stopcock )	-	-	-
Table 6(v) Length of tube of uniform bore below graduation line )	-	-	-
Table 7(vi) Distance of end of jet from underside of stopcock )	-	-	-
8.2( c) Top of burette )	-	-	-
8.3(d) Stopcock and similar devices)	-	-	-
8.4(e) Stop Cock Leakage)	-	-	-
8.5( f) Delivery jet)	-	-	-
8.6(g) Delivery time )	-	-	-
8.6(g) Delivery time )	-	-	-
9(Graduations, figuring and patterns )	-	-	-
9.1(a) Graduations patterns )	-	-	-
9.2(Position of graduation line)	-	-	-
9.3(c) Marking of graduation lines )	-	-	-
12(. Visibility of graduation line)	-	-	-
7(Material)	-	-	-

04 Dec, 2028

-
Included w.e.f 05.05.2025

1496

Arbro Pharmaceuticals Private Limited

8116816

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

Commercial Grade

18600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	200	20% Discount only for BIS
Cl-5.2.2(Coliform)	-	200	20% Discount only for BIS
Cl-5.2.3(Faecal streptococci)	-	200	20% Discount only for BIS
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	200	20% Discount only for BIS
Cl-5.2.5(Pseudomonas Aeruginosa)	-	200	20% Discount only for BIS
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	200	20% Discount only for BIS
Cl-5.2.7(Yeast and mould)	-	200	20% Discount only for BIS
Cl-5.2.8(Salmonella)	-	200	20% Discount only for BIS
Cl-5.2.9(Vibrio cholera)	-	200	20% Discount only for BIS
5.3(Appearance)	-	100	20% Discount only for BIS
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	100	20% Discount only for BIS
Cl-5.3, Table-1 (ii)(Odour)	-	100	20% Discount only for BIS
Cl-5.3, Table-1 (iii)(Taste)	-	100	20% Discount only for BIS
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	200	20% Discount only for BIS
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	200	20% Discount only for BIS
Cl-5.3, Table-1 (vi)(pH)	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	200	20% Discount only for BIS
5.3/Table 2/xiii(Suphate)	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (xx)(Mineral oil)	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (xxii)(Sulphide)	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	200	20% Discount only for BIS
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	200	20% Discount only for BIS
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	200	20% Discount only for BIS
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	200	20% Discount only for BIS
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	200	20% Discount only for BIS
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	500	20% Discount only for BIS
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	200	20% Discount only for BIS
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	200	20% Discount only for BIS
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	200	20% Discount only for BIS
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	500	20% Discount only for BIS
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	500	20% Discount only for BIS
Cl-5.3, Table-3 (x)(Uranium)	-	1500	20% Discount only for BIS
5.4/Annex D/i(P,P-DDT)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/ii(Lindane)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/iv(b-Endosulfan)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/xvi(Dieldrin)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS)
5.4/Annex D/xvi(Aldrin)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/i(O,P-DDT)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/iv(a-Endosulfan)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/iii(d-HCH)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/i(O,P-DDD)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/i(P,P-DDE)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/i(O,P-DDE)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/iii(a-HCH)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS)
5.4/Annex D/iii(β- HCH)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/iv(Endosulfan sulfate)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/i(P,P-DDD)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/xii(Alachlor)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/vii(Chlorpyrifos)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/x(Butachlor)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/vi(Ethion)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/xiv(Methyl parathion)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/xv(Malathion)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/viii(Phorate)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/v(Monochrotophos)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/xiii(Atrazine)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/viii(Phorate sulphoxide)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/xxvii(Methyl paraoxon)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/xxviii(Malaoxon)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/xi(Isoproturon)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
5.4/Annex D/ix(2,4 –D)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
Cl-5.2.3(Staphylococcus aureus)	-	200	20% Discount only for BIS
5.4/Annex D/viii(Phorate sulfone)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS
Cl-5.2.8(shigella)	-	200	20% Discount only for BIS
Cl-5.2.9(V.parahaemolyticus)	-	200	20% Discount only for BIS
Cl-5.4 (i)(Pesticide residues considered individually)	-	6000	All pesticide residue testing charges (6000RS) 20% Discount only for BIS

14 Jan, 2026

-
Exclusion: Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l), Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l)

1497

KRISHNA DIGITAL MATERIAL TESTING LABORATORY LLP, BHOPAL

8168706

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

Type- Type A and Type B / Size 1 to 6

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2.1(Mass of zinc coating (line wire))	-	500	-
12.2.2(Mass of zinc coating (point wire))	-	500	-
4(Type A/Type B)	-	200	-
5 Table-1(Sizes Diameter of Line wire)	-	200	-
5 Table-1(Sizes Diamater of Point wire)	-	200	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	200	-
5 Table-1(Sizes Distance between two barbs)	-	200	-
9.1(Freedom from defects)	-	200	-
12.1(Tensile Strength)	-	900	-
12.1(Breaking load)	-	500	-
12.3(Ductility)	-	500	-
5 Table-1(Sizes No. of Lays between the two consequtive barbs)	-	200	-
12.2(Uniformity of zinc coating)	-	200	-
Cl. 7.2(Cut Angle)	-	200	-
Cl. 7.2(Length of Barbs)	-	200	-
Cl. 7.2(Finishing of Barbs)	-	200	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1(General)	-	200	-
12.2.1(Mass of zinc coating (line wire))	-	0	-
12.2.2(Mass of zinc coating (point wire))	-	0	-
4(Type A/Type B)	-	0	-
5 Table-1(Sizes Diameter of Line wire)	-	0	-
5 Table-1(Sizes Diamater of Point wire)	-	0	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	0	-
5 Table-1(Sizes Distance between two barbs)	-	0	-
9.1(Freedom from defects)	-	0	-
12.1(Tensile Strength)	-	0	-
12.1(Breaking load)	-	0	-
12.3(Ductility)	-	0	-
5 Table-1(Sizes No. of Lays between the two consequtive barbs)	-	0	-
12.2(Uniformity of zinc coating)	-	0	-
Cl. 7.2(Cut Angle)	-	0	-
Cl. 7.2(Length of Barbs)	-	0	-
Cl. 7.2(Finishing of Barbs)	-	0	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1(General)	-	0	-
9.2(Freedom from defects)	-	0	-
9.2(Freedom from defects)	-	0	-
9.2(Freedom from defects)	-	0	-
12.2.1(Mass of zinc coating (line wire))	-	0	-
12.2.2(Mass of zinc coating (point wire))	-	0	-
4(Type A/Type B)	-	0	-
5 Table-1(Sizes Diameter of Line wire)	-	0	-
5 Table-1(Sizes Diamater of Point wire)	-	0	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	0	-
5 Table-1(Sizes Distance between two barbs)	-	0	-
9.1(Freedom from defects)	-	0	-
12.1(Tensile Strength)	-	0	-
12.1(Breaking load)	-	0	-
12.3(Ductility)	-	0	-
5 Table-1(Sizes No. of Lays between the two consequtive barbs)	-	0	-
12.2(Uniformity of zinc coating)	-	0	-
Cl. 7.2(Cut Angle)	-	0	-
Cl. 7.2(Length of Barbs)	-	0	-
Cl. 7.2(Finishing of Barbs)	-	0	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.1(General)	-	0	-
9.2(Freedom from defects)	-	0	-
9.2(Freedom from defects)	-	0	-
9.2(Freedom from defects)	-	0	-
8(CHROMATING)	-	0	-

19 Aug, 2027

-
Included w.e.f 19.05.2025

1498

NAWaL Analytical Labs India Private Limited, Hosur

6126416

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

6100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	250	18% GST Extra
4.2 (chem)(Design, Shape & Dimension)	-	350	18% GST Extra
4.3 (chem)(Workmanship, Finish & Appearance)	-	400	18% GST Extra
4.4 (chem)(Brimful capacity)	-	350	18% GST Extra
4.5 (chem)(a) Wall Thickness, mm Top)	-	400	18% GST Extra
4.5 (chem)((b) Wall Thickness, mm Middle)	-	0	18% GST Extra
4.5 (chem)((c) Wall Thickness, mm Bottom)	-	0	18% GST Extra
4.6.2(TRANSPARANCY)	-	450	18% GST Extra
Cl. 4.6.3( Cl. 4.6.3 Closure Leakage)	-	450	18% GST Extra
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	450	18% GST Extra
Cl. 4.6.3(Cl. 4.6.3 Air Pressure Leakage)	-	450	18% GST Extra
4.6.4(DROP TEST)	-	450	18% GST Extra
4.6.5.1.a(Colour migration Test (Container))	-	1100	18% GST Extra
4.6.5.1.b(Colour migration Test (Cap))	-	0	18% GST Extra
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	1000	18% GST Extra
Cl. 4.6.5 (chem)(Cl. 4.6.5 Overall migration (Caps))	-	0	18% GST Extra
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	0	18% GST Extra
Cl.4.6.7.2 and 4.6.7.3, Table 3, (i)(Barium)	-	350	18% GST Extra
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii)(Cobalt)	-	350	18% GST Extra
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii)(Copper)	-	350	18% GST Extra
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iv)(Iron)	-	350	18% GST Extra
Cl.4.6.7.2 and 4.6.7.3, Table 3, (v)(Lithium)	-	350	18% GST Extra
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vi)(Manganese)	-	350	18% GST Extra
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vii)(Zinc)	-	350	18% GST Extra
Cl.4.6.7.2 and 4.6.7.3, Table 3, (viii)(Antimony)	-	350	18% GST Extra
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	1200	18% GST Extra
CL 4.6.7.2 and 4.6.7.3, Table 3 (iv)(Iron)	-	0	18% GST Extra

21 Mar, 2028

-
-

1499

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 302 : Part 2 : Sec 11 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 11 tumbler dryers

180000 View breakup
-

Clause No.	Exclusion	Remark
3(GENERAL REQUIREMENT)	-	-
4(GENERAL NOTES ON TESTS)	-	-
5(RATING)	-	-
6(CLASSIFICATION)	-	-
7(MARKING)	-	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	-
10(INPUT AND CURRENT)	-	-
11(HEATING)	-	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	-
15(MOISTURE RESISTANCE)	-	-
17(OVERLOAD PROTECTION)	-	-
18(ENDURANCE )	-	-
19(ABNORMAL OPERATION)	-	-
20(STABILITY AND MECHANICAL HAZARDS)	-	-
21(MECHANICAL STRENGTH)	-	-
22(CONSTRUCTION)	-	-
23(INTERNAL WIRING)	-	-
24(COMPONENTS)	-	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	-
27(PROVISION FOR EARTHING)	-	-
28(SCREWS AND CONNECTIONS)	-	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	-
31(RESISTANCE TO RUSTING)	-	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	-
101.1(Type Tests)	-	-
101.2(Acceptance Tests)	-	-
101.3(Routine Tests)	-	-

05 Apr, 2027

-
Included w.e.f.21.05.2025 Exclusion 19 (ABNORMAL OPERATION) Radiated emission, Conducted & Radiated susceptibility

1500

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET), RANCHI

5173614

IS 8008 (2022)

Injection Moulded/Machined Polyethylene Fittings for Water Supply ï¿½ Specification ( Second Revision )

PE100, PE80, PE63,Size: up to DN 315 mm

27625.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	0	GST Extra
5(COLOUR)	-	500	GST Extra
6.1(The nominal outside diameter)	-	500	GST Extra
6.2(Bends, tees, pipe ends and end caps designation)	-	500	GST Extra
7(WELD LENGTH)	-	500	GST Extra
8(VISUAL APPEARANCE)	-	500	GST Extra
9.1(DIMENSIONS OF FITTINGS)	-	500	GST Extra
9.2(DIMENSIONS OF FITTINGS)	-	500	GST Extra
9.3(DIMENSIONS OF FITTINGS)	-	500	GST Extra
10.1.1(Length of Pipe for Welding Test)	-	500	GST Extra
10.1.2(Sandwich Flange Hydraulic Testing)	-	4500.00	GST Extra
10.2(Carbon Black Content and Dispersion)	-	925	GST Extra
10.3(Melt Flow Rate)	-	1100	GST Extra
10.4(Density)	-	700	GST Extra
10.5(Oxidation Induction Time)	-	2200	GST Extra
10.6(Overall Migration)	-	2200	GST Extra
11.1(Type Tests)	-	5300	GST Extra
11.2(Acceptance Tests)	-	6100	GST Extra
4.1(Material)	-	0	GST Extra
4.2(Material)	-	0	GST Extra
4.2(Material)	-	0	GST Extra
4.3(Rework Material)	-	0	GST Extra
4.1(Material)	-	0	GST Extra
5(COLOUR)	-	0	GST Extra
6.1(The nominal outside diameter)	-	0	GST Extra
6.2(Bends, tees, pipe ends and end caps designation)	-	0	GST Extra
7(WELD LENGTH)	-	0	GST Extra
8(VISUAL APPEARANCE)	-	0	GST Extra
9.1(DIMENSIONS OF FITTINGS)	-	0	GST Extra
9.2(DIMENSIONS OF FITTINGS)	-	0	GST Extra
9.3(DIMENSIONS OF FITTINGS)	-	0	GST Extra
10.1.1(Length of Pipe for Welding Test)	-	0	GST Extra
10.1.2(Sandwich Flange Hydraulic Testing)	-	0	GST Extra
10.2(Carbon Black Content and Dispersion)	-	0	GST Extra
10.3(Melt Flow Rate)	-	0	GST Extra
10.4(Density)	-	0	GST Extra
10.5(Oxidation Induction Time)	-	0	GST Extra
10.6(Overall Migration)	-	0	GST Extra
11.1(Type Tests)	-	0	GST Extra
11.2(Acceptance Tests)	-	0	GST Extra
4.1(Material)	-	0	GST Extra
4.2(Material)	-	0	GST Extra
4.2(Material)	-	0	GST Extra
4.3(Rework Material)	-	0	GST Extra

09 Aug, 2026

-
Included w.e.f.05.05.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number