| 14521 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 1660 (2009) |
Wrought aluminium utensils - Specification (First Revision) |
- |
Rs 6760/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 0.5 (Fabrication) |
- |
|
|
|
| 6.1 & Table 1 ( i) Name of Utensil ) |
- |
|
|
|
| 6.1 & Table 1 (ii) Shape of Utensil) |
- |
|
|
|
| 6.1 & Table 1 (Inside dia, Φ D mm Not declared ) |
- |
|
|
|
| 6.1 & Table 1 (Outside dia Ф NA) |
- |
|
|
|
| 6.1 & Table 1 (Height NA) |
- |
|
|
|
| 6.1 & Table 1 (Capacity, l NA) |
- |
|
|
|
| 6.1 ( Minimum sheet thickness for nominal size ) |
- |
|
|
|
| 7.1 (HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use ) |
- |
|
|
|
| 7.2 (Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil) |
- |
|
|
|
| 8.1 (The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects) |
- |
|
|
|
| 8.2 (The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt) |
- |
|
|
|
| 8.4.1.2 ( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.) |
- |
|
|
|
| 8.4.2 (A coating of thickness 25 to 100 microns is generally required) |
- |
|
|
|
| 8.4.3 (Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface) |
- |
|
|
|
| 8.4.4 (The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. ) |
- |
|
|
|
| 8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible) |
- |
|
|
|
| 9 (The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils) |
- |
|
|
|
| 10 (Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. ) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Carbon of IS 6911) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Silicon of IS 6911) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Silicon of IS 737) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Silicon of IS 21) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Phosphorous of IS 6911) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Sulphor of IS 6911) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Manganese of IS 6911) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Manganese of IS 737) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Magnesium of IS 21) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Nickel of IS 6911) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Chromium of IS 6911) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Chromium of IS 737) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Chromium of IS 21) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Molybdenum of IS 6911) |
- |
|
|
|
| ( Clauses 4, 4.1, 4.2 and 4.3) (Nitrogen of IS 6911) |
- |
|
|
|
|
- |
-
Facility not available for
1) Non stick plastic coating conforming to IS 9730[IS 9730-Thickness(Cl. 4.3), Non stick quality(Cl. 4.4), Adhesion(Cl. 4.6) - Cross hatch test] ; 2) Performance test(Cl. 8.6.1), |
| 14522 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 6902 (1973) |
Specification for steel wire for spokes |
For all sizes |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 4.1 (Carbon- IS 228) |
- |
|
|
|
| Cl. 4.1 (Manganese- IS 228.) |
- |
|
|
|
| Cl. 4.1 (Sulphur- IS 228.) |
- |
|
|
|
| Cl. 4.1 (Phosphorus- IS 228.) |
- |
|
|
|
| 5.1 ( Tensile strength ) |
- |
|
|
|
| 6.0 ( Bend Test ) |
- |
|
|
|
| 7.0 (Freedom from defects ) |
- |
|
|
|
| 8.0 (Wire diameter & Tolerances) |
- |
|
|
|
| 8 (Wire diameter & Tolerances) |
- |
|
|
|
| 5.1 ( Tensile strength ) |
- |
|
|
|
| 6 ( Bend Test ) |
- |
|
|
|
| 7 (Freedom from defects ) |
- |
|
|
|
|
- |
-
3 m + 100 gm drillings |
| 14523 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 7887 (1992) |
Mild steel wire rod for general engineering purposes - Specification (First Revision) |
- |
Rs.7200/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8 (Workmanship) |
- |
|
|
|
| Cl 9 (Nominal Diameter & Out Of Shape) |
- |
|
|
|
| 6.1 (Carbon %) |
- |
|
|
|
| 6.1 (Manganese %) |
- |
|
|
|
| 6.1 (Phosphorus %) |
- |
|
|
|
| 6.1 (Sulphur %) |
- |
|
|
|
| 6.1 (Silicon %) |
- |
|
|
|
|
- |
-
Mechanical-Complete Excluding Microalloying Elements, Copper |
| 14524 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 210 (2009) |
Grey iron castings - Specification (First Revision) |
- |
Rs.2700.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1 (WORKMANSHIP AND FINISH) |
- |
|
|
|
| 10.1 (FREEDOM FROM DEFECTS) |
- |
|
|
|
| 13 (SIZE OF TEST BARS-Diameter) |
- |
|
|
|
| 13 (SIZE OF TEST BARS-Length) |
- |
|
|
|
| 15, Table 3 (TENSIL.E TEST- IS 1608 Part1 ) |
- |
|
|
|
| 16, Table 3 (Hardness Test) |
- |
|
|
|
| 18 (HYDROSTATIC TEST) |
- |
|
|
|
| 17,Annex B (TRANSVERSE TEST) |
- |
|
|
|
|
- |
-
" 3 TEST BARS
Excluding Hardness test |
| 14525 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 13334 : Part 2 (2014) |
Skimmed milk powder - Specification: Part 2 extra grade (First Revision) |
- |
Rs 10430/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table 1 (i) (Moisture (IS 116231or 16072)) |
- |
|
|
|
| Table 1 (v) (Total ash (on dry basis), Annex B of IS 14433) |
- |
|
|
|
| Table 1 (iv) (Insolubility index (IS 12759)) |
- |
|
|
|
| Table 1 (vi) (Titratable acidity (IS 11766)) |
- |
|
|
|
| Table 1 (iv) (Insolubility index (IS 12759)) |
- |
|
|
|
| Table 1 (vi) (Titratable acidity (IS 11766)) |
- |
|
|
|
| Table 1 (iv) (Insolubility index (IS 12759)) |
- |
|
|
|
| Table 1 (vi) (Titratable acidity (IS 11766)) |
- |
|
|
|
| Table 1 (iii) (Milk fat (IS 117213) or Annex B) |
- |
|
|
|
| Table 1 (viii) (Scorched particles (equivalent to Disc B) (IS 13500)) |
- |
|
|
|
| Table 1 (ix) (Bacterial count (IS 5402)) |
- |
|
|
|
| Table 1 (x) (Coliform count (IS 5401 - Part 1)) |
- |
|
|
|
| Table 1 (xi) (Escherichia coli (IS 5887 - Part 1)) |
- |
|
|
|
| Table 1 (xii) (Coagulase positive Staphylococcus aureus (IS 5887 - Part 2)) |
- |
|
|
|
| Table 1 (xiii) (Salmonella (IS 5887 - Part 3)) |
- |
|
|
|
| Table 1 (xiv)(a) (Spore Count: a) Aerobic (Bacillus cereus) Type M (IS 5887 - Part 6)) |
- |
|
|
|
| Table 1 (xiv)(b) (Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003)) |
- |
|
|
|
| Table 1 (xv) (Listeria monocytogenes (IS 14988 - Part 2 : 2001)) |
- |
|
|
|
|
- |
-
Microbiological testing is complete. Excluding Lactate Content |
| 14526 |
BIS, Central Laboratory (CL)
| None
| IS 1848 : Part 1 (2018) |
Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.2 (Substance, Ref IS 1763) |
- |
|
|
|
| Cl. 4.4 (Size and tolerance on size) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Tensile index, Account book-CD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Tensile index, Account book-MD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (One minute cobb test, Account book) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Double fold, Account book-CD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Double fold, Account book-MD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Wax pick, Account book) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Smoothness(Bendtsen),Account book) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Tear index, Account book-CD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Tear index, Account book-MD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Tensile index, Azure laid-CD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Tensile index, Azure laid-MD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii (Tear index, Typewriting-MD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Smoothness(Bendtsen),Account book) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (One minute cobb test, Azure laid) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Double fold, Azure laid-CD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Double fold, Account book-MD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (One minute cobb test, Azure laid) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Double fold, Azure laid-CD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Double fold, Azure laid-MD) |
- |
|
|
|
| Cl. 4.5 (pH) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (Tensile index, Bond-CD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (Tensile index, Bond-MD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (Tensile index, Bond-CD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (Tear index, Bond-CD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (Tear index, Bond-MD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii (One minute cobb test, Bond) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi (One minute cobb test, Printing White Super Calendered) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-CD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-MD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii (Tensile index, Typewriting-MD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Wax pick, Cream laid and cream wove/printing white/printing coloured/printing offset) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Smoothness bendtsen, Cream laid and cream wove/printing white/printing coloured/printing offset) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv (Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Gloss, Account book) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i (Opacity, Account book) |
- |
|
|
|
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii (Brightness ISO, Azure laid) |
- |
|
|
|
| Cl.4.3 (Thickness) |
- |
|
|
|
|
- |
-
Test facility is not available of the mntioned exclusion paramters;
Excluding ISO Brightness, Opacity, Gloss percent; |
| 14527 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 7532 (2018) |
Soft soap - Specification (First RevisIon) |
- |
Total testing charges-Rs 8915/- (except storage test), View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| CL 5 ( 5.1) (The material shall be homogeneous translucent mass of jelly-like texture, free from putrescent, fishy or objectionable odour. It applies to soft soap with potassium or sodium base or a mixture of these bases. It does not apply to soaps for medicinal purposes. It may or may not be suitably perfumed subject to agreement between the purchaser and the supplier. It shall be free from foreign matter and visible impurities) |
- |
|
|
|
| 5.2 (5.2 The material shall quickly form a satisfactory lather while in use and shall show no sign of any deterioration on storage in original sealed containers under normal conditions for a period of 12 months.) |
- |
|
|
|
| 5.4 (Soft soap is liable to lose moisture on keeping. The results obtained for unsaponified and unsaponifiable matter, total free alkali and free caustic alkali by the specific methods of analysis shall, therefore, be recalculated in relation to the specified minimum total fatty matter by means of the equation: Recalculated result = Minimum specified total fatty matter content Actualresult× Actual total fatty matter conten) |
- |
|
|
|
| Table-1 (i) IS.no 286 (Total Fatty Matter ( Type 1 )) |
- |
|
|
|
| Table1(ii) IS.no 286 CL12 (Unsaponified and Unsaponified matter (Type 2 )) |
- |
|
|
|
| Table-1 (iii) IS.no 286 CL 14 (Rosin acids percent by mass of total fatty matter ( Type 1)) |
- |
|
|
|
| Table-1 (iv) IS.no 286 Annex A (Total free alkali ( as K2O ) type 1) |
- |
|
|
|
| Table-1 (v) IS.no 286 CL 6 ( see note ) (Free Caustic alkali ( as K2O) type 1) |
- |
|
|
|
| 5.3 (The soap shall not become liquid at 32°C, and no liquid shall separate when the soap is maintained at 0°C, for 24 h.) |
- |
|
|
|
| Table-1 (ii) IS.no 286 CL 12 (Unsaponified and Unsaponified matter (Type 1 )) |
- |
|
|
|
|
- |
-
- |
| 14528 |
BIS, Central Laboratory (CL)
| None
| IS 2312 (1967) |
Specification for propeller type AC ventilating fans (First Revision) |
- |
Rs 13800/- with regulator View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 13.1 (Marking) |
- |
|
|
|
| 13.1 (a) (Marking) |
- |
|
|
|
| 13.1 (b) (Marking) |
- |
|
|
|
| 13.1 (c) (Marking) |
- |
|
|
|
| 13.1 (d) (Marking) |
- |
|
|
|
| 13.1 (e) (Marking) |
- |
|
|
|
| 13.1 (f) (Marking) |
- |
|
|
|
| 13.1 (g) (Marking) |
- |
|
|
|
| 13.1 (h) (Marking) |
- |
|
|
|
| 13.1 (j) (Marking) |
- |
|
|
|
| 13.2 (Marking) |
- |
|
|
|
| 13.4 (Marking) |
- |
|
|
|
| 3.1 (Sizes ) |
- |
|
|
|
| 4.1 (Rated Voltage) |
- |
|
|
|
| 5.1 (Rated frequency) |
- |
|
|
|
| 6.1 (Design and General Construction) |
- |
|
|
|
| 6.3 (Design and General Construction) |
- |
|
|
|
| 6.3 (Design and General Construction) |
- |
|
|
|
| 6.4 (Design and General Construction) |
- |
|
|
|
| 6.5 (Design and General Construction) |
- |
|
|
|
| 6.6 (Design and General Construction) |
- |
|
|
|
| 6.7 (Design and General Construction) |
- |
|
|
|
| 6.9 (Design and General Construction) |
- |
|
|
|
| 6.1 (Design and General Construction) |
- |
|
|
|
| 6.11 (Design and General Construction) |
- |
|
|
|
| 6.12 (Design and General Construction) |
- |
|
|
|
| 7.1 (Design and General Construction) |
- |
|
|
|
| 8.1 (Design and General Construction) |
- |
|
|
|
| 9 (Design and General Construction) |
- |
|
|
|
| 10.1 (Starting ) |
- |
|
|
|
| 11.1 (Interchangeability) |
- |
|
|
|
| 14.3.A (Temperature-Rise (for motors)) |
- |
|
|
|
| 14.3.A (Temperature-Rise (for motors)) |
- |
|
|
|
| 14.3.A (Temperature-Rise (for motors)) |
- |
|
|
|
| 14.3.A (Temperature-Rise (for motors)) |
- |
|
|
|
| 14.3.B (Temperature-Rise (for regulators)) |
- |
|
|
|
| 14.3.B (Temperature-Rise (for regulators)) |
- |
|
|
|
| 14.4 (Moistureproofness (for regulators only)) |
- |
|
|
|
| 14.4 (Moistureproofness (for regulators only)) |
- |
|
|
|
| 14.1 & 14.6 (Power factor) |
- |
|
|
|
| 14.7 (ac leakage) |
- |
|
|
|
| 14.8 (High voltage test) |
- |
|
|
|
| 14.9 (Insulation-Resistance) |
- |
|
|
|
| 14.1 (Earthing continuity) |
- |
|
|
|
| 14.11 & 15.1 (Electrical Input) |
- |
|
|
|
| 14.12 & 16 (Fan Speed) |
- |
|
|
|
| 14.2 & 15.1 (Air Delivery) |
- |
|
|
|
|
- |
-
TF Complete only for 300mm, 380mm and 450mm |
| 14529 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 2090 (1983) |
Specification for high tensile steel bars used in prestressed concrete (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5 (Tolerances (Size & Mass)) |
- |
|
|
|
| 6.1, Table 1 (i) 0.2% Proof stress, Mpa) |
- |
|
|
|
| 6.1, Table 1 (ii)Ultimate Tensile Strength, Mpa) |
- |
|
|
|
| 6.1, Table 1 (iii)Elongation, %) |
- |
|
|
|
|
- |
-
" mech - 4 m
Excluding except Chemical tests |
| 14530 |
BIS, Central Laboratory (CL)
| None
| IS 1322 (1993) |
Bitumen Felts for Water Proofing and Damp-proofing |
- |
Rs.8300/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.4 & Table 1 (Weight ) |
- |
|
|
|
| 5.5 (Free from external defects - IS 1322) |
- |
|
|
|
| 6 (Dimension-IS 1322) |
- |
|
|
|
| 7.1 (Breaking Strength test- IS 13826(Part 1)) |
- |
|
|
|
| 7.1 (Pliabilitry Test-IS 13826(Part 2)) |
- |
|
|
|
| 7.1 (Strage Sticking Test-IS 13826(Part 3)) |
- |
|
|
|
| 7.1 (Pressure Head Test-IS 13826(Part-4 ) |
- |
|
|
|
| 7.1 (Heat Resistance Test-IS 13826(Part 5)) |
- |
|
|
|
| 7.1 (Water Absorption Test-IS 13826(Part 6)) |
- |
|
|
|
|
- |
-
excluding -; Pliability test,Storage sticking,Pressure head test ,Heat resistance |
| 14531 |
CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL
| 8100534
| IS 2508 (2016) |
Polyethylene films and sheets - Specification (Third Revision) |
- |
18625 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.1(Appearance) |
- |
300 |
|
Nil |
| 5.1.2(Film Form) |
- |
0 |
|
Charge already taken in clause no. 5.1.1 (Combined charges with visual appearance) |
| 5.1.3(Odour) |
- |
0 |
|
Charge already taken in clause no. 5.1.1 (Combined charges with visual appearance) |
| 5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1)) |
- |
500 |
|
Nil |
| 5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1)) |
- |
1100 |
|
Nil |
| 5.1.6a(Carbon Black Content, Annex-A) |
- |
925 |
|
Nil |
| 5.1.6b(Ash Content, Annex-A) |
- |
950 |
|
Nil |
| 5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530) |
- |
700 |
|
Nil |
| 5.2.2(Tolerance on Thickness, Annex-A) |
- |
500 |
|
Thickness & Width combined charges |
| 6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1)) |
- |
1350 |
|
Test charges Rs. 1100/- plus specimen charges Rs. 250/- = Rs. 1350/- (25% discount in not applicable in specimen charges) |
| 6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3)) |
- |
1100 |
|
Nil |
| 6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 ) |
- |
4300 |
|
(25% discount in not applicable in Ageing charges) |
| 6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) ) |
- |
1350 |
|
Test charges Rs. 1100/- plus specimen charges Rs. 250/- = Rs. 1350/- (25% discount in not applicable in specimen charges) |
| 6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) ) |
- |
1100 |
|
Nil |
| 6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) ) |
- |
1000 |
|
Nil |
| 6.1, Table 1(Tear resistence. A) Machine direction Annex B) |
- |
1000 |
|
Test charges Rs. 750/- plus specimen charges Rs. 250/- = Rs. 1000/- (25% discount in not applicable in specimen charges) |
| 6.1, Table 1(Tear resistence. B) Transverse direction ) |
- |
750 |
|
Nil |
| 7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) ) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
| 7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) ) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
| 7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 ) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
| 7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) ) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
| 7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) ) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
| 7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) ) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
| 8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
| 8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
| 8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
| 8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
| 8.1, Table 3(Tear resistance , Annex B) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
| 8.1, Table 3(Puncture resistance , Annex C) |
- |
1100 |
|
Nil |
| 9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
| 9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
1100 |
|
Nil |
| 9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
| 9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
| 9.1, Table 4(Tear resistance , Annex B) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
| 9.1, Table 4(Puncture resistance , Annex C) |
- |
0 |
|
The charges applicable as per clause 7.1 Table-1 |
|
31 Dec, 2026 |
-
- |
| 14532 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 6911 (2017) |
Stainless steel plate, sheet and strip - Specification (Second Revision) |
For all grades except for the tests mentioned in remarks |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 (Freedom from defects , IS 6911) |
- |
|
|
|
| 10.1,Table 4&Table 6 (Tensile Test - IS 1608(Pt -1)) |
- |
|
|
|
| 10.2,Table 4&Table 5 (Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1)) |
- |
|
|
|
| 10.3 (Bend Test - IS 1599) |
- |
|
|
|
| 11,Table 7 (Erichsen cupping test-IS 10175) |
- |
|
|
|
| 17 (Dimension and tolerance) |
- |
|
|
|
| Cl. 7.1 & 7.2 Table 1 (Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 7.1 & 7.2 Table 1 (Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 7.1 & 7.2 Table 1 (Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 7.1 & 7.2 Table 1 (Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 7.1 & 7.2 Table 1 (Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 7.1 & 7.2 Table 1 (Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 7.1 & 7.2 Table 1 (Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 7.1 & 7.2 Table 1 (Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 7.1 & 7.2 Table 1 (Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 7.1 & 7.2 Table 1 (Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 7.1 & 7.2 Table 1 (Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 7.1 & 7.2 Table 1 (Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl.12 (Corrosion Resistance- IS 10461(Part1)) |
- |
|
|
|
| Cl.12 (Corrosion Resistance- IS 10461(Part2)) |
- |
|
|
|
| Table 1 (Alumium) |
- |
|
|
|
| Table 1, Amendment 2 (Tungstun) |
- |
|
|
|
| Table 1, Amendment 2 (Ta) |
- |
|
|
|
| Table 1, Amendment 2 (Zirconium) |
- |
|
|
|
| Table 1, Amendment 2 (Cobalt) |
- |
|
|
|
|
- |
-
Chem- Wire Diameter Should be Greater than 3 mm.
Mech- Steel designation and element specified in Cl.7.3 (if applicable)
100 g drillings |
| 14533 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 6603 (2024) |
Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars â Specification (Second Revision) |
All Grades and Conditions |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl - 9.1,9.5,13.2 (Thickness or Diameter) |
- |
|
|
|
| Cl-7.1, 7.2 (C) |
- |
|
|
|
| Cl-7.1, 7.2 (Si) |
- |
|
|
|
| Cl-7.1, 7.2 (Mn) |
- |
|
|
|
| Cl-7.1, 7.2 (P) |
- |
|
|
|
| Cl-7.1, 7.2 (S) |
- |
|
|
|
| Cl-7.1, 7.2 (Cr) |
- |
|
|
|
| Cl-7.1, 7.2 (Mo) |
- |
|
|
|
| Cl-7.1, 7.2 (Ni) |
- |
|
|
|
| Cl-7.1, 7.2 (N) |
- |
|
|
|
| Cl-7.1, 7.2 (Ti) |
- |
|
|
|
| Cl-7.1, 7.2 (Cu) |
- |
|
|
|
| Cl-7.1, 7.2 (Nb) |
- |
|
|
|
| Cl-7.1, 7.2 (W) |
- |
|
|
|
| Cl-7.1, 7.2 (V) |
- |
|
|
|
| Cl-7.1, 7.2 (Al) |
- |
|
|
|
| Cl-7.1, 7.2 (Ti: (C + N)) |
- |
|
|
|
| Cl-7.1, 7.2 (Boron) |
- |
|
|
|
| cL-7.1, 7.2 (Co) |
- |
|
|
|
|
- |
-
Chem- Wire Diameter Should be Greater than 3 mm
Mech- Steel designation and element specified in Cl.7.3 (if applicable) to be declared. Prepared sample required for Charpy Impact Test |
| 14534 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 1673 (1984) |
Spectfication for mild steel wire, cold heading quality (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 (FREEDOM FROM DEFECTS) |
- |
|
|
|
| 8 ( DIMENSIONS AND TOLERANCES) |
- |
|
|
|
|
- |
-
" mech - 3 m "
Excluding except reverse torsion test, crushing test, tensile properties and chemical tests |
| 14535 |
BIS, Central Laboratory (CL)
| None
| IS 9295 (1983) |
Specification for steel tubes for idlers for belt conveyors (First Revision) |
- |
Rs 5100/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1 (Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method) |
- |
|
|
|
| 7.1 (Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method) |
- |
|
|
|
| 8.1.1 Table 1 (Tensile Strength- IS 1608(1)) |
- |
|
|
|
| 8.1.1 Table 1 (Yield Strength- IS 1608) |
- |
|
|
|
| 8.1.1 Table 1 (Elongation Percent- IS 1608) |
- |
|
|
|
| 8.2 (Drift Expansion Test- IS 2335) |
- |
|
|
|
| 8.3 (Flattening Test- IS 2328) |
- |
|
|
|
| 9.1 Table 2 (Outside Diameter) |
- |
|
|
|
| 9.1 Table 2 (Thickness) |
- |
|
|
|
| 9.1 Table 2 (Mass) |
- |
|
|
|
| 10 (Hardness) |
- |
|
|
|
| 13.1.1 (Ovality) |
- |
|
|
|
| 13.1.2 (Eccentricity) |
- |
|
|
|
| 15.1 (Straightness) |
- |
|
|
|
| 16.1 (Length) |
- |
|
|
|
| 17.1 (Surface Protection) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 14536 |
BIS, Central Laboratory (CL)
| None
| IS 9825 (2003) |
Chlorine tablets - Specification (Second Revision) |
- |
Rs.4330/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.2 (Description) |
- |
|
|
|
| Cl.4.3 (Available Chlorine (Annex A)) |
- |
|
|
|
| Cl.4.4 (Moisture (Annex B)) |
- |
|
|
|
| Cl.4.3 (Size (Mass of tablet)) |
- |
|
|
|
|
- |
-
- |
| 14537 |
BIS, Central Laboratory (CL)
| None
| IS 8952 (1995) |
Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes - Specification (First Revision) |
- |
Rs 4840/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4,7.1 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 4,7.1 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 4,7.1 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 4,7.1 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 4,7.1 Table 1 (Nb+V+Ti - IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 14538 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 784 (2019) |
Prestressed concrete pipes (Including Specials) - Specification (Third Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.4 (Circumferential Prestressing) |
- |
|
|
|
|
- |
-
Certification Scheme is being operated on FT basis Excluding only compression strength can be done |
| 14539 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 1783 : Part 1 (2014) |
Drums large, fixed ends - Specification: Part 1 grade A drums (Fourth Revision) |
- |
Rs.4800/- and testing charges as per relevant referred View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Capacity) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 7.1 (Construction) |
- |
|
|
|
| 7.2 (Construction) |
- |
|
|
|
| 7.3 (Construction) |
- |
|
|
|
| 7.4 (Construction) |
- |
|
|
|
| 7.5 (Construction) |
- |
|
|
|
| 7.6 (Construction) |
- |
|
|
|
| 8 (Finish ) |
- |
|
|
|
| 9.1 (Leakage at air pressure ) |
- |
|
|
|
| 9.2 (Drop Test) |
- |
|
|
|
| 9.3 (Hydraulic Pressure Test) |
- |
|
|
|
|
- |
-
- |
| 14540 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 4454 : Part 1 (2001) |
Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision) |
For all grades except tests mentioned in remarks |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8 (Workmanship) |
- |
|
|
|
| Cl 9 (Diameter & Difference Between Two Reading On Any Two Diameters) |
- |
|
|
|
| Cl 10 (Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test) |
- |
|
|
|
| Cl 10 (Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test) |
- |
|
|
|
| Cl 10 (Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test) |
- |
|
|
|
| 7.1, 7.2 (carbon) |
- |
|
|
|
| 7.1, 7.2 (sulphur) |
- |
|
|
|
| 7.1, 7.2 (phosphorus) |
- |
|
|
|
| 7.1, 7.2 (manganese) |
- |
|
|
|
| 7.1, 7.2 (silicon ) |
- |
|
|
|
| 7.1, 7.2 (copper) |
- |
|
|
|
| Cl 10 (Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test) |
- |
|
|
|
| 7.1, 7.2 (Vanadium) |
- |
|
|
|
| 7.1, 7.2 (nitrogen) |
- |
|
|
|
| 7.1, 7.2 (sulphur + phosphorus) |
- |
|
|
|
| 7.1, 7.2 (cu + cr+ni) |
- |
|
|
|
|
- |
-
Facility not available for Micro alloying elements (V, Nb, Ti) |
| 14541 |
BIS, Central Laboratory (CL)
| None
| IS 7454 (1991) |
Rehabilitation equipment - Wheelchairs, folding, adult size - Specification (First Revision) |
- |
Rs. 8400/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 5.1 Table 1 (Overall Length) |
- |
|
|
|
| Cl. 5.1 Table 1 (Overall Width, Open) |
- |
|
|
|
| Cl. 5.1 Table 1 (Overall Width, Folded) |
- |
|
|
|
| Cl. 5.1 Table 1 (Overall height) |
- |
|
|
|
| Cl. 5.1 Table 1 (Scat height from floor at the fron) |
- |
|
|
|
| Cl. 5.1 Table 1 (Distance between seat and footrest) |
- |
|
|
|
| Cl. 5.1 Table 1 (Armrest height from seat) |
- |
|
|
|
| Cl. 5.1 Table 1 (Scat depth) |
- |
|
|
|
| Cl. 5.1 Table 1 (Clearance of footrest from floor) |
- |
|
|
|
| Cl. 5.1 Table 1 (Clearance of frame from floor) |
- |
|
|
|
| Cl. 5.1 Table 1 (Wheel diameter) |
- |
|
|
|
| Cl. 5.1 Table 1 (Weight of the wheel chair ( basic model )) |
- |
|
|
|
| Cl. 7.1 (Backrest and Seat) |
- |
|
|
|
| Cl.7.2 (Frame) |
- |
|
|
|
| Cl.7.3 (Footrests and Supports) |
- |
|
|
|
| Cl.7.4 ( Armrests) |
- |
|
|
|
| Cl.7.5 (Hand Rims) |
- |
|
|
|
| Cl.7.6 (Brakes) |
- |
|
|
|
| Cl.7.7 (Castors) |
- |
|
|
|
| Cl.7.8 (Wheels) |
- |
|
|
|
| Cl.7.9 (Clothing Guards) |
- |
|
|
|
| Cl.7.10 (Folding Mechanism) |
- |
|
|
|
| Cl.7.11 (Lubrication) |
- |
|
|
|
| Cl. 8 (Finish) |
- |
|
|
|
| Cl. 9.1 (Test for Wheeling) |
- |
|
|
|
| Cl. 9.3 (Load Test) |
- |
|
|
|
| Cl. 9.4 (Test for Folding) |
- |
|
|
|
| Cl. 9.2 (Hazard Running Test) |
- |
|
|
|
| Cl. 5.1 Table 1 (Slope of the seat) |
- |
|
|
|
| Cl. 5.1 Table 1 (Slope of backrest with respect to floor) |
- |
|
|
|
|
- |
-
- |
| 14542 |
BIS, Central Laboratory (CL)
| None
| IS 8951 (2001) |
Steel cast billet ignots, billets and blooms for production of high carbon steel wire rods - Specification (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4,7.1 & 7.2 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 4,7.1 & 7.2 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 4,7.1 & 7.2 Table 1 (Silicon- IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 4,7.1 & 7.2 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 4,7.1 & 7.2 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 4,7.1 & 7.2 Table 1 (Copper- IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 4,7.1 & 7.2 Table 1 (Nickel- IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 4,7.1 & 7.2 Table 1 (Chromium- IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 4,7.1 & 7.2 Table 1 (Nitrogen- IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 4,7.1 & 7.2 Table 1 (Cu+Ni+Cr- IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 14543 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 7092 : Part 2 (1987) |
Specification for aluminium alloy tube for irrigation purposes: Part 2 extruded tube (Second Revision) |
For all sizes excepts tests mentioned in remarks |
Rs 11230/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4 (Workmanship & Finish) |
- |
|
|
|
| Cl. 6.3 (Drift Expanding Test ( Expanded Inside Diameter- IS 2335) |
- |
|
|
|
| Cl.6.2 (0.2 percent proof strength- IS 2657) |
- |
|
|
|
| Cl.6.2 (Elongation on 50 mm gauge length- IS 2657) |
- |
|
|
|
| Cl. 6.3 (Drift Expanding Test ( Expanded Inside Diameter- IS 2335) |
- |
|
|
|
| Cl.7.1, Table 2 (Outside Diameter-) |
- |
|
|
|
| Cl.7.1, Table 2 (Roundness or Ovality) |
- |
|
|
|
| Cl.7.1, Table 2 (Wall Thickness) |
- |
|
|
|
| Cl. 7.2 (Length) |
- |
|
|
|
| Cl. 6.1 (Copper- IS 504 or any other established instrumental/ chemical method) |
- |
|
|
|
| Cl. 6.1 (Magnesium- IS 504 or any other established instrumental/ chemical method) |
- |
|
|
|
| Cl. 6.1 (Silicon- IS 504 or any other established instrumental/ chemical method) |
- |
|
|
|
| Cl. 6.1 (Iron- IS 504 or any other established instrumental/ chemical method) |
- |
|
|
|
| Cl. 6.1 (Manganese- IS 504 or any other established instrumental/ chemical method) |
- |
|
|
|
| Cl. 6.1 (Zinc- IS 504 or any other established instrumental/ chemical method) |
- |
|
|
|
| Cl. 6.1 (Chromium- IS 504 or any other established instrumental/ chemical method) |
- |
|
|
|
| Cl. 6.1 (Titanium and/ other grain refining elements) |
- |
|
|
|
| Cl. 6.1 (Aluminium- IS 504 or any other established instrumental/ chemical method) |
- |
|
|
|
|
- |
-
Mech: Facility not available for hydrostatic pressure test
Chem: Cl.6.1 Al |
| 14544 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 432 : Part 2 (1982) |
Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire |
All sizes |
Rs 3900/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4.1 (Workmanship) |
- |
|
|
|
| Cl 5 & 6 (Diameter) |
- |
|
|
|
| Cl 8.3 (Bending To Both Side At 90°, Then Straight) |
- |
|
|
|
| Clause 3.1.1 (Sulphur) |
- |
|
|
|
| Clause 3.1.1 (Phosphorus) |
- |
|
|
|
| Cl 7 (UTM) |
- |
|
|
|
|
- |
-
Complete |
| 14545 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 1566 (1982) |
Specification for hard - Drawn steel wire fabric for concrete reinforcement (Second Revision) |
- |
Rs 300/- + mat test as per IS:432(Pt 2) View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 (DIMENSIONS) |
- |
|
|
|
| 8 (MASS) |
- |
|
|
|
| 10 (MECHANICAL PROPERTIES) |
- |
|
|
|
| 11.2 (Tensile Test) |
- |
|
|
|
| 9.4 (Tolerance on Mass of Fabric) |
- |
|
|
|
| 7 (SIZES OF SHEETS ‘OR ROLLS) |
- |
|
|
|
| 9.2 (Tolerance on Size of Mesh) |
- |
|
|
|
| 9.3 (Tolerance on Size of Sheet) |
- |
|
|
|
| 10 (MECHANICAL PROPERTIES) |
- |
|
|
|
|
- |
-
" 2 x 500 mm
Excluding except bend test and chemical tests |
| 14546 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 7834 : Part 1 (1987) |
injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements |
- |
Rs.2400/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4 (Minimum Thickness) |
- |
|
|
|
| Cl. 5.1.1, 5.1.2, Table 1, Fig 1 (Minimum Socket Length) |
- |
|
|
|
| Cl. 5.1.1, 5.1.2, Table 1, Fig 1 (Mean Socket Internal Diameter at Mid-Point of Socket Length) |
- |
|
|
|
| Cl. 5.1.1, 5.1.2, Table 1, Fig 1 (Out-of-roundness tolerances of socket inside diameter) |
- |
|
|
|
| Cl. 6.1 (Stress Relief Test- Appendix A) |
- |
|
|
|
| Cl. 6.4 (Short-Term Hydraulic Test- Appendix D) |
- |
|
|
|
|
- |
-
Excluding Performance requirements |
| 14547 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 432 : Part 1 (1982) |
Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars |
All size and grades |
Rs 2100/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 5.1 (Workmanship) |
- |
|
|
|
| Cl 6.2 (Weight) |
- |
|
|
|
| Cl 6.2 (Diameter & Ovality) |
- |
|
|
|
| Cl 8.2 (Bend test) |
- |
|
|
|
| Cl 9.3 (Press) |
- |
|
|
|
| Clause -4, 4.1 ( CARBON) |
- |
|
|
|
| Clause -4, 4.1 (MANGANESE) |
- |
|
|
|
| Clause -4, 4.1 (SULPHUR) |
- |
|
|
|
| Clause -4, 4.1 (PHOSPHURS) |
- |
|
|
|
| Clause -4, 4.1 (SILICON) |
- |
|
|
|
| Clause -4, 4.1 (NITROGEN) |
- |
|
|
|
| Cl 6.2 (Diameter & Ovality) |
- |
|
|
|
| Cl 8.1 (ultimate tensile stress, yield stress and percentage elongation) |
- |
|
|
|
| Clause -4, 4.3 (TITANIUM) |
- |
|
|
|
| Clause 4 (Boron) |
- |
|
|
|
| Clause -4, 4.2 (VANADIUM) |
- |
|
|
|
| Clause -4, 4.1 (NIOBIUM) |
- |
|
|
|
| Clause -4, 4.1 (Molybdenum) |
- |
|
|
|
| Clause -4, 4.1 (Chromium) |
- |
|
|
|
| Clause -4, 4.1 (Nickel) |
- |
|
|
|
| Clause -4, 4.1 ( ALUMINIUM) |
- |
|
|
|
| Clause 4 (Carbon Equivalent) |
- |
|
|
|
| Clause 4 (Ni+V+Ti) |
- |
|
|
|
| Clause 4 (Copper) |
- |
|
|
|
|
- |
-
- |
| 14548 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 15647 (2006) |
Hot rolled steel narrow width strip for welded tubes and pipes |
- |
Rs.9900/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8 (UTM) |
- |
|
|
|
| Cl 11 (Workmanship) |
- |
|
|
|
| Cl 12 (Length, Width & Thickness) |
- |
|
|
|
| Cl 8 (UTM) |
- |
|
|
|
| Cl 11 (Workmanship) |
- |
|
|
|
| Cl 12 (Length, Width & Thickness) |
- |
|
|
|
| Cl 9 (Press) |
- |
|
|
|
| Cl 13 (Workmanship) |
- |
|
|
|
| Cl 13 (Workmanship) |
- |
|
|
|
|
- |
-
" 1.5 m
Excluding except Chemical tests |
| 14549 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 5346 (1994) |
Synthetic food colour - Preparations and mixtures - Specification (Second Revision) |
- |
Rs. 4100/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.5 (Total dye Content) |
- |
|
|
|
| Clause 4.6 Table 1 (Water InsoIuble matter,) |
- |
|
|
|
| Clause 4.5 (Total dye Content) |
- |
|
|
|
| Clause 4.6 Table 1 (Lead (as pb) ) |
- |
|
|
|
| Clause 4.6 Table 1 (Arsenic(as As)) |
- |
|
|
|
| Clause 4.6 Table 1 (Heavy metals) |
- |
|
|
|
| Clause no4.2 (Description) |
- |
|
|
|
|
- |
-
- |
| 14550 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 15392 (2003) |
Aluminium and aluminium alloy bare foil for food packaging - Specification |
- |
3371 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 5
Table 1 (PINHOLE COUNT) |
- |
|
|
|
| Clause 6 (FREEDOM FROM DEFECTS) |
- |
|
|
|
| Clause 10
Table 2 (Preferred Thickness) |
- |
|
|
|
| Clause 11 (Average Thickness) |
- |
|
|
|
| Clause 14 (Surface condition) |
- |
|
|
|
| Clause 12 (Dimension and Tolerances: I) Width) |
- |
|
|
|
| Clause 12 (Dimension and Tolerances: 2) Length) |
- |
|
|
|
| 7 (Copper- IS 504) |
- |
|
|
|
| 7 (Magnesium-IS 504) |
- |
|
|
|
| 7 (Silicon- IS 504) |
- |
|
|
|
| 7 (Iron-IS 504) |
- |
|
|
|
| 7 (Manganese-IS 504) |
- |
|
|
|
| 7 (Zinc-IS 504) |
- |
|
|
|
| 7 (Titanium- IS 504) |
- |
|
|
|
| 7 (Chromium- IS 504) |
- |
|
|
|
| 7 (Cu+Si+Fe+Mn+Zn) |
- |
|
|
|
| 7 (Cu+Mg+Si+Pe+Mn+Zn) |
- |
|
|
|
|
- |
-
" 20 metre coils - 3 Nos Chemical Facility is available Quantity: 5 Pieces of 5cm X 5cm
Excluding except tensile test |
