BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15364 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

14491

BIS, Central Laboratory (CL)

None

IS 5514 (1996)

Specification Apparatus Used in `Le-chatelier' Test

s.1200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (CONSTRUCTION-Thickness)	-
2 (CONSTRUCTION-Internal Dia.)	-
2 (CONSTRUCTION-Height)	-
2 (CONSTRUCTION-Distance between ended)	-
2 (CONSTRUCTION-cover plate Weight)	-
3-Table 1 (DIMENSIONS-Outer side of the mould to the end of the indicator)	-
3-Table 1 (DIMENSIONS-Internal diameter of the mould)	-
3-Table 1 (DIMENSIONS-wall thickness of the mould)	-
3-Table 1 (DIMENSIONS-Split)	-

-
-

14492

BIS, Southern Regional Laboratory (SRL)

None

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

Rs.3750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9 (Tensile Test On UTM)	-
Cl 13 (Workmanship)	-
Cl 7 & Table 1 (Diameter & Difference Between Two Reading On Any Two Diameters)	-
6 AND AS PER IS 7887 (MICRO ALLOY)	-
6 AND AS PER IS 7887 (ALUMINIUM)	-
6 AND AS PER IS 7887 (PHOSPHORUS)	-
6 AND AS PER IS 7887 (SULPHUR)	-
6 AND AS PER IS 7887 (MANGANESE)	-
6 AND AS PER IS 7887 (SILICON)	-
6 AND AS PER IS 7887 (CARBON)	-
Clause 6 and Note 3 of IS 7887 (Copper)	-

-
" 3 m+ 50gm " Chemical Facility is available Quantity: 5 Pieces of 5cm X 5cm Excluding Mech-C /

14493

BIS, Central Laboratory (CL)

None

IS 11169 : Part 1 (1984)

Specification for steels for cold heading/cold extrusion applications: Part 1 wrought carbon and low alloy steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Diameter & Out Of Roundness)	-
Cl 6 (Diameter & Out Of Roundness)	-
Cl 6 (Diameter & Out Of Roundness)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) ( CARBON)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (SULPHUR)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (PHOSPHURS)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (MANGANESE)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (SILICON)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) ( ALUMINIUM)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (NITROGEN)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (Nickel)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (Chromium)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (Molybdenum)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (NIOBIUM)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (VANADIUM)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (TITANIUM)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (TIN)	-

-
sample of 5 cutpc having dia > 3mm and thickness > 0.8 mm shall be provided. Grade/designation of material of component as per Cl. 7 of IS 111169(P-1):2022 has to be declraed.; Excluding -; Cl 7 - Freedom From Deects, Cl 10 - Metturgical Properties, Cl 11 - Hardenability

14494

BIS, Southern Regional Laboratory (SRL)

None

IS 5484 (1997)

Ec grade aluminium rod produced by continuous casting and rolling - Specification (Second Revision)

Rs.3240.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1 (Diameter - IS:5484)	-
8-Table-1 (Tensile Strength - IS:1608)	-
9 (Resistyvity at 20 degree C -IS:398(P-2))	-
11.1 (Joint- IS:5484)	-
12.2 (Finish - IS:5484)	-

-
" 3 m Excluding chem facility not available.

14495

BIS, Central Laboratory (CL)

None

IS 10631 (1983)

Specification for stainless steel for welding electrode core wire

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table 1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (FREEDOM FROM DEFECTS)	-
7 (Size and Tolerances)	-
Clause 5.1 (Carbon)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm. Grade/Designation as per Table 1 may also be declared.;

14496

BIS, Central Laboratory (CL)

None

IS 9516 (1980)

Specification for heat resisting steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1,5.2,5.3 Table 4 (Carbon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Sulphur-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Phosphorous-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Manganese-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Nitrogen-Relevant parts of IS 228)	-
4 (FREEDOM FROM DEFECTS)	-
6, Table 2 (i) Yield stess/.2% Proof stress, Mpa)	-
6, Table 2 (ii)Ultimate Tensile Strength, Mpa)	-
6, Table 2 (iii)Elongation, %)	-
6, Table 2 (iv) Hardness, HBW)	-
7 (DIMENSIONS AND TOLERANCE)	-
5.1,5.2,5.3 Table 4 (Silicon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Nickel-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Chromium-Relevant parts of IS 228)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm. Grade/Designation as per Table 4 may also be declared.; Excluding -; Cl 4.1 Internal Defacts, Cl 6.2 0.2% Proof Stress, Cl 8.2.2 Tests pieces prparation

14497

BIS, Northern Regional Laboratory (NRL)

None

IS 8462 (1977)

Specification for sterilizer, portable, vertical, pressure type

For sterilizers with painted steel stand Rs.9580/-. For View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Shape and Dimensions)	-
4.2 (Thickness)	-
5.8 (Construction)	-
6.1 (Workmanship and Finish)	-
6.2 (Workmanship and Finish)	-
8.1 (Proof Pressure Test)	-

-
Mechanical: Test facility is complete, Facility for chemical test is not available

14498

BIS, Southern Regional Laboratory (SRL)

None

IS 5489 (1975)

Specification for carburizing steels for use in bearing industry (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 ( HARDNESS)	-
11.3 (i) Tolerance on Length -IS : 3739-1972)	-
11.4 (ii)Tolerance on Straightness)	-
12 ( SIZE AND WEIGHT OF WIRE AND WIRE ROD)	-

-
" 2 x 1 m " Excluding except inclusion content, Grain size and Chemical tests

14499

BIS, Central Laboratory (CL)

None

IS 9476 (1980)

Specification for cold-rolled steel strips for carbon steel razor blades

525 for Physical + carbide density test View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Carbon- IS 228)	-
4.1 (Manganese- IS 228)	-
4.1 (Silicon- IS 228)	-
4.1 (Sulphur- IS 228)	-
4.1 (Phosphorous- IS 228)	-
4.1 (Chromium- IS 228)	-
4.1 (Sulphur+Phosphorous- IS 228)	-
3.1 (Nitrogen- IS 228)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14500

BIS, Central Laboratory (CL)

None

IS 10212 : Part 1 (1986)

General requirements of packages for explosives: Part 1 coommercial high explosives (First Revision)

900 View breakup
Rs. 900/- excluding bursting strength.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.3.1, 5.4.1, 5.4.2 - Table 2 - i) (Bursting Strength)	-
Cl.5.3.1, 5.4.1, 5.4.2 - Table 2 - ii) (Water Absorption Cobb/30 min )	-

-
-

14501

BIS, Central Laboratory (CL)

None

IS 4824 (2006)

Bead wire for tyres - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 & Table 3 (UTM)	-
Cl 8 (Torsion)	-
Cl 9 (Press)	-
Cl 11 (Weight)	-
Cl 13 (Workmanship)	-
Cl 14 (Diameter)	-

-
Only C & S can be tested for dia < 3mm; Excluding test facility not available for diameter < 3 mm for element other than C & S; i) Adhesion Test (As per Annex A) ii) Coating weight (As per annex B-1)

14502

BIS, Southern Regional Laboratory (SRL)

None

IS 2681 (1993)

Non - Ferrous metal sliding door bolts (Aldrops) for use with padlocks - Specification (Third Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 8.1 (Brass sliding door bolts shall have satin finish or shall be polished or plated as specified by the purchaser)	-
Cl. 8.2 (Ref. Cl.9 of IS 1868:1996) (Anodinc casting thickness (Cl. 9.2 of IS 1868:1996))	-
4 (SIZES)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-A)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-B)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-C)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-D)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-E)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-F)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-G)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-H)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-L)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-M)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-R)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-T)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-U)	-
7.1 (MANUFACTURE-General)	-
7.1 (MANUFACTURE-General)	-
8.1 (FINISH)	-
3 (TYPES)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-J)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-K)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-N)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-Q)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-S)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-W)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-A)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-B)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-C)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-D)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-E)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-F)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-H)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-J)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-K)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-L)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-M)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-Pin dia)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-R)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-T)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-U)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8)	-
7.1 (MANUFACTURE-General)	-
7.2 (MANUFACTURE-Brass Sliding Door Bolts or Aluminium Alloy Sliding Door Bolts)	-
7.2 (MANUFACTURE-Brass Sliding Door Bolts or Aluminium Alloy Sliding Door Bolts)	-
8.2 (FINISH)	-
8.2 (FINISH-anodic casting -Min Avg thickness)	-
8.2 (FINISH-anodic casting -Min Local thickness)	-

-
" 3+2 Nos. Excluding except chemical tests and anodic coating

14503

BIS, Central Laboratory (CL)

None

IS 5513 (1996)

Specification for vicat apparatus

Rs1800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (DIMENSIONS)	-
5.1 (constructions-General)	-
5.1.1 (constructions-General)	-
5.2 (constructions-Needles )	-
5.2.1 (constructions-Needles -Clearance)	-
5.2.2 (constructions-Needles -Dimensions of Needles-Dia)	-
5.2.2 (constructions-Needles -Dimensions of Needles-Length)	-
5.3 (constructions-Plunger-Dia)	-
5.3 (constructions-Plunger-Length)	-
5.4 (constructions-Movable Rod-Clearance)	-
5.5 (constructions-Graduated Scale )	-
5.5 (constructions-Vicat Mould-internal diamete of top)	-
5.5 (constructions-Vicat Mould-internal diamete of Bottom)	-
5.5 (constructions-Vicat Mould-Height)	-
5.5 (constructions-Vicat Mould-Wall thickness)	-
5.7 (constructions-Mass-Needle C)	-
5.7 (constructions-Mass-Needle F)	-
5.7 (constructions-Mass-Plunger G)	-

-
-

14504

BIS, Central Laboratory (CL)

None

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.2 & 4.2 (PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-
9.2 & 4.2.3 (Nominal Dimensions-variation in the length of units )	-
9.2 & 4.2.3 (Nominal Dimensions -variation in height and width of units )	-
9.5 (PHYSICAL REQUIREMENTS -Water Absorption)	-

-
-

14505

BIS, Northern Regional Laboratory (NRL)

None

IS 8329 (2000)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

Rs.7800/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 10 (Hardness & Tensile Test)	-
Cl 11 (Hydrostatic Test)	-
Cl 13 (Length, Diameter, Wall Thickness & Ovality)	-

-
Excluding HST for size above 300 mm

14506

BIS, Northern Regional Laboratory (NRL)

None

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

9710 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 (UTM)	-
Cl 8 (Press)	-
Cl 9 (Strainage Embrittlement)	-
Cl 13 (Length, Width & Thickness)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
6.1 (Nitrogen%)	-

-
Excluding, Cupping Test, Microalloying elements

14507

BIS, Central Laboratory (CL)

None

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

8200.00 (complete testing charges) View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.2 (Physical requirments-Dimensions-Length)	-
8.2 (Physical requirments-Dimensions-Height)	-
8.2 (Physical requirments-Dimensions-Width)	-

-
Excluding -; Drying shrinkage,Thermal condictivity,Compressive Strength

14508

BIS, Western Regional Laboratory (WRL)

None

IS 7224 (2006)

Iodized salt, vacuum evaporated iodized salt and refined iodized salt - Specification (Second Revision)

Rs7440/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.2 (Particle Size)	-
Clause 4.3 Table 1 (Moisture content)	-
Clause 4.3 Table 1 (water insoluble matter)	-
Clause 4.3 Table 1 (Calcium (as Ca))	-
Clause 4.3 Table 1 (Magnesium (as mg))	-
Clause 4.3 Table 1 (Sulphate (as SO4 ),)	-
Clause 4.3 Table 1 (Iodine content, a) Manufacturers Level )	-
Clause 4.3 Table 1 (Alkalinity (as Na2CO3),)	-
Clause 4.3 Table 1 (Arsenic(as As))	-
Clause 4.3 Table 1 (Iron(as Fe))	-
Clause 4.3 Table 1 (Chloride Content(as Nacl))	-
Clause 4.3 Table 1 (Matter soluble in water other than sodium chloride)	-
Clause 4.3 Table 1 (Lead as (Pb))	-
4.4 (Anticaking agents (Potassium Ferrocyanide))	-
Clause 4.3 Table 1 (b) Distribution channel including retailer)	-

-
Test facility not available for the following: 1. Pb

14509

BIS, Central Laboratory (CL)

None

IS 2098 (1997)

Asbestos cement building boards - Specification (First Revision)

3300 (Complete testing charges) View breakup
Excluding Load Bearing Capacity Test. Rs. 980 for Load Bearing Capacity Test.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 Table -1 ( TOLERANCES - 1.Tolerance on Length & Width)	-
7.2 Table -1 (2.Tolerance on Thickness )	-
8.3 Table 1 & 7.1 (TESTS-Measurement of Thickness )	-
8.4 (TESTS-Water Absorption Test )	-

-
-

14510

BIS, Southern Regional Laboratory (SRL)

None

IS 2385 (1977)

Specification for hot - Rolled mild steel sheet and strip in coil form for cold - Reduced tinplate and cold - Reduced blackplate (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Freedom from defects)	-
8 (Dimensions and Tolerances)	-

-
" Mech- 2 x 500 mm Excluding except Chemical tests

14511

BIS, Eastern Regional Laboratory (ERL)

None

IS 8052 (2006)

Steel ingots,billets and blooms for the production of springs, rivets and screws for general engineering applications - Specification (Second Revision)

All grades except for the tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause No. 6.1 Table No. 1 (Carbon)	-
Clause No. 6.1 Table No. 1 (Silicon)	-
Clause No. 6.1 Table No. 1 (Manganese)	-
Clause No. 6.1 Table No. 1 (Sulphur)	-
Clause No. 6.1 Table No. 1 (Phosphorus)	-
Clause No. 6.1 Table No. 1 (Chromium)	-
Clause No. 6.1 Table No. 1 (Molybdenum)	-
8 (Freedom from defects , IS 8052)	-
10,11 (Dimensions & Tolerances)	-
9,a) (Macro examination - IS 11371)	-
9,d) (Inclusion content - IS 4163)	-
6.1 Table 1 (Vanadium- IS 228 or any other established instrumental /Chemical method)	-

-
Remarks: Grade designation to be declared

14512

BIS, Eastern Regional Laboratory (ERL)

None

IS 6909 (1990)

Supersulphated cement ? specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 (Magnesium Oxide - Cl 4.8 of IS 4032:1985)	-
5.1 (Sulphuric anhydride - Cl 4.9 of IS 4032:1985)	-
5.1 (Sulphide sulphur - Cl 6.12 of IS 4032:1985)	-
6.1 (Fineness 4031 Part 2)	-
6.2 (Soundness (cold expansion) by Le Chatelier- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
5.1 (Chloride content)	-
5.1 (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 (Magnesium Oxide - Cl 4.8 of IS 4032:1985)	-
5.1 (Sulphuric anhydride - Cl 4.9 of IS 4032:1985)	-
5.1 (Sulphide sulphur - Cl 6.12 of IS 4032:1985)	-
6.5 (Transverse Strength - IS 4031 Part 8 (Optional))	-

-
mech- 8 kg, Chem: 1kg Excluding except transverse test(Optional)

14513

BIS, Southern Regional Laboratory (SRL)

None

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

26250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (CONDUCTOR: MATERIALS)	-
4 (INSULATION : MATERIALS)	-
5.1 (FILLER AND INNER SHEATH)	-
5.2 (FILLER AND INNER SHEATH)	-
6 (ARMOURING)	-
7 (OUTER SHEATH)	-
8.1 (CONDUCTOR: CONSTRUCTION)	-
8.2 (PROTECTIVE BARRIER)	-
8.3 (SIZE OF NEUTRAL CONDUCTOR)	-
9.1 (Insulation Applied by extrusicn)	-
9.2 (Thickness of Insulation - Average)	-
9.3 (Thickness of Insulation - Minimum)	-
9.4 (Application of Insulation)	-
10.1 (Core Identification)	-
10.2 (Core Identification- Neutral)	-
10.3 (Core Identification by number )	-
10.4 (Core Identification by number - Neutral )	-
11 (LAVING UP OF CORES)	-
12.1 & 12.2 (Inner sheath : Application)	-
12.3 (Thickness of Inner Sheath)	-
13.1 (Armouring: Application)	-
13.1.2 (Armouring: Coverage )	-
13.1.3 (Armouring: Direction of Lay )	-
13.2 (Type of armour )	-
13.3 (Armouring : Dimensions -Wire Diameter)	-
13.3 (Armouring : Dimensions -Formed wire )	-
13.4 (Armour: Joint)	-
13.5 (Armouring : Resistance Test)	-
13.6 a) (ARMOURING: Tensile Strength)	-
13.6 b) (ARMOURING: Elongation )	-
13.6 c) (ARMOURING: Torsion Test (For round wire ) )	-
13.6 d) (ARMOURING: Winding Test(For formed wire))	-
13.6 e) (ARMOURING: Uniformity of zinc coating)	-
13.6 f) (ARMOURING: Mass of zinc coating )	-
13.6 g) (ARMOURING: Resistivity)	-
14.1 (Outer Sheath : Application)	-
14.2 (Colour of outer sheath)	-
14.3 (Thickness of outer sheath - AVERAGE)	-
14.3 (Thickness of outer sheath - minimum)	-
15.1 a) i) (Annealing Test ( For copper wire ) )	-
15.1 a) ii) (Tensile test (for aluminium) - Before stranding )	-
15.1 a) ii) (Tensile test (for aluminium) - After stranding )	-
15.1 a) iii) (Wrapping test (for aluminium))	-
15.1 a) iv) (Resistance test - Main conductor)	-
15.1 a) iv) (Resistance test - Neutral conductor)	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-
15.1 e) v) (Sheath : Hot deformation)	-
15.1 e) vi) (Sheath : Heat shock test)	-
15.1 e) vii) (Sheath : Thermalstability)	-
15.1 f) (INSULATION RESISTANCE TEST : Volume resistivity )	-
16.2 (HIGH VOLTAGE TEST )	-
16.3 (FLAMMABILITY TEST : Period of Burning )	-
16.3 (FLAMMABILITY TEST : Unaffected length )	-
17.1 (Manufacturer'. identification)	-
17.2 (cable Indentification )	-
17.3 (cable Code )	-

-
15m Excluding Except C1 & C2 Category, Cu Purity Test

14514

BIS, Central Laboratory (CL)

None

IS 3832 (2005)

Hand - Operated chain pulley block - Specification (Third Revision)

Please see remarks. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.2 (Classification)	-
Cl 5.1 (Frame)	-
Cl 5.3 (Load brake)	-
Cl 5.4 (Pawls)	-
Cl 5.6 (Lubrication)	-
Cl 5.7 (Suspension Fittings)	-
Cl 5.8.1 (Load Chain )	-
Cl 5.10 (Hand Chain)	-
Cl 9.1 (Design Test)	-
Cl 9.3 (Light Load Test )	-
Cl 9.4 (Endurance Type Test )	-

-
Excluding -; i)Light load test (As per CL 9.3.1) ii)Endurance Test(As per CL 9.4.1) iii)Breaking force of load chain and Total Ultimate elongation(As per CL6.4.2 of IS 3077:2001)

14515

BIS, Southern Regional Laboratory (SRL)

None

IS 2255 (1977)

Specification for mild steel wire rod for the manufacture of machine screws (By Cold Heading Process) (Second Revision)

Rs. 600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Sizes and tolernces)	-
8 (FREEDOM FROM DEFECTS)	-

-
" 3 m Excluding except chemical tests

14516

BIS, Northern Regional Laboratory (NRL)

None

IS 814 (2004)

Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)

Rs. 17500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1.1 (Diameter of Core Wire)	-
7.1.2 (Length of Electrodes)	-
7.2.1 (Contact End)	-
7.2.2 (Arc striking End)	-
7.3 (Concentricity of Flux covering with core wire)	-
9.1.2 Table 6 (Ultimate Tensile Strength-Annex F)	-
9.1.2 Table 6 ( Yield Stress -Annex F)	-
9.1.2 Table 6 (Percentage Elongation on Gauge Length-Annex F)	-
9.2 (Butt Weld Bend Test-IS 1599)	-
6 & 8.2 (Carbon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Silicon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Manganese- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Copper- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Vanadium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Titanium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Alumiminium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Cr+Ni+Mo - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Chromium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Nickel- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Molybdenum- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Mn+Ni+Cr+Mo+V - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-

-
Radiographic test, increased metal recovery, diffusible hydrogen evaluation and For tensile and bend test prepared test pieces are required. Complete testing facility for Cl. 6 is available. Test Facility as per Cl. 8.2 is not available

14517

BIS, Northern Regional Laboratory (NRL)

None

IS 2061 (1995)

Bicycle - Front forks - Specification (First Revision)

Rs. 2727/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 (MARKING)	-
3 (Material)	-
4 (Dimensions)	-
5 (. Manufacturer&Finish)	-
7.1.1 ( i) Load test )	-
7.1.2 (ii) Expansion Tes )	-
7.1.3 (iii) Tests for Finish)	-
7.1.4 (iv) Impact Test)	-
7.1.3 (iii) Tests for Finish)	-

-
Mechanical: Test facility is complete, Chemical: Excluding Microalloying elements

14518

BIS, Western Regional Laboratory (WRL)

None

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 18 (Weight)	-
Cl 15 (Length, Width & Thickness)	-
Cl 12 (Sudden Load Applied)	-
Cl 11.3 (Press)	-
Cl 10.3 (UTM)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Test facilities are not available for the following: 1. Micro-alloying elements, Cu, Al, Nitrogen 2. Y grove Crackability Test in Structural Steel

14519

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 9825 (2003)

Chlorine tablets - Specification (Second Revision)

Rs.4330/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.2 (Description)	-
Cl.4.3 (Size (Mass of tablet))	-
Cl.4.3 (Available Chlorine (Annex A))	-
Cl.4.4 (Moisture (Annex B))	-
Cl.4.4 (Shelf Life (Annex A))	-

-
-

14520

BIS, Central Laboratory (CL)

None

IS 2080 (1980)

Specification for stabilized hydrogen peroxide (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl No. 3.2 (Strength)	-
Cl NO. 3.3.1 (Strength)	-
Cl NO. 3.3.2 (Strength)	-
Cl No. 3.4 [ Table 1, Sl no.(i) ] Appendix C-1 Grade 1 (Acidity (as H2SO4))	-
Cl No. 3.4 [ Table 1, Sl no. (i)] Appendix C-1 Grade 2 (Acidity (as H2SO4))	-
Cl No. 3.4 [ Table 1, Sl no. (i)] Appendix C-1 Grade 3 (Acidity (as H2SO4))	-
Cl No. 3.4 [ Table 1, Sl no. (ii)] Appendix C-2 Grade 1 (Residue on evaporation.)	-
Cl No. 3.4 [ Table 1, Sl no.( ii)] Appendix C-2 Grade 2 (Residue on evaporation.)	-
Cl No. 3.4 [ Table 1, Sl no. (ii)] Appendix C-2 Grade 3 (Residue on evaporation.)	-
Cl No. 3.4 [ Table 1, Sl no.(iii)] Appendix C-3 Grade 1 (Residue on ignition,)	-
Cl No. 3.4 [ Table 1, Sl no.(iii)] Appendix C-3 Grade 2 (Residue on ignition,)	-
Cl No. 3.4 [ Table 1, Sl no.(iii)] Appendix C-3 Grade 3 (Residue on ignition,)	-
Cl No. 3.4 [ Table 1, Sl no.(iv) ] Appendix C-4 Grade 1, Grade 2 , & Grade 3 (Iron ( at Fe ))	-
Cl No. 3.4 [ Table 1, Sl no.(v) ] Appendix C-5 Grade 1, Grade 2 , & Grade 3 (Copper ( as Cu ))	-
Cl No. 3.4 [ Table 1, Sl no.(vi) ] Appendix C-6 Grade 1, Grade 2 , & Grade 3 (Lead (as Pb))	-
Cl No. 3.4 [ Table 1, Sl no.(vii) ] Appendix C-7 Grade 1, Grade 2 , & Grade 3 ref to 5.1 of IS : 2088-1971 (Arsenic ( as As2O3 ))	-

-
excluding Determination of stability for grade 1,2 , 3, 4;

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number