BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15633 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

14461

Research & Development Centre for Bicycle and Sewing Machine, Ludhiana

9100634

IS 1610 (2018)

Household sewing machines - General requirements (Fourth Revision)

10000 View breakup
Rs.10,000/- + GST

Clause No.	Exclusion	Remark
4.1(Sewing Mechanism Design )	-	+ GST@18%
8(WORKMANSHIP AND FINISH)	-	--
10.1 IS 7491 (Accuracy Requirement Functional Dimension Feed Dog Measuring Condition - Feed dog raised to its highest position )	-	--
10.1 IS 7491 (Accuracy Requirement Functional Dimension Shuttle and shuttle driver Measuring Condition - Shuttle heel at bottom - most position)	-	--
10.1 IS 7491 (Accuracy Requirement Functional Dimension Presser foot Measuring Condition - Presser foot in lifted condition)	-	--
10.2 IS 7492 (Sewing Requirement)	-	--
10.3 IS 7493 (Durability Requirement Needle bar Measuring Condition - Needle bar at lower-most condition)	-	--

-
0.0

14462

Research & Development Centre for Bicycle and Sewing Machine, Ludhiana

9100634

IS 2061 (1995)

Bicycle - Front forks - Specification (First Revision)

12000 View breakup
Rs.12000/- + GST

Clause No.	Exclusion	Remark
3(Material)	-	+ GST@18%
4(Dimensions)	-	--
5(. Manufacturer&Finish)	-	--
7.1.1( i) Load test )	-	--
7.1.2(ii) Expansion Tes )	-	--
7.1.3(iii) Tests for Finish)	-	--
7.1.4(iv) Impact Test)	-	--

-
0.0

14463

AADCO TESTING & RESEARCH LABORATORY PVT LTD (F28), GHAZIABAD

8141606

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

All Grades

3200 View breakup
Rs.3200/- for Mechanical + Chemical (10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	267	By calculation
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	267	By calculation
6.1 Table-2 iii.(Insoluble residue)	-	267	By testing
6.1 Table-2 iv(Magnesia)	-	267	By testing
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	267	By testing
6.1 Table-2 vi(Loss on ignition)	-	267	By testing
6.1 Table-2 vii(Chloride content)	-	267	By testing
6.1 Table-2 viii(Alkali content)	-	267	By testing
7 Table-3 i.(Fineness)	-	267	By testing
7 Table-3 ii a(Expansion by Le Chatelier)	-	267	By testing
7 Table-3 ii b(Expansion by Autoclave)	-	267	By testing
7 Table-3 iii a(Setting Time Initial)	-	267	By testing
7 Table-3 iii b(Setting Time Final)	-	267	By testing
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	266	By testing
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	266	By testing
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	266	By testing

26 Jul, 2027

-
Except Transverse Strength

14464

DELHI TEST HOUSE, Azadhpur

8131406

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

10000 View breakup
Rs.10000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	NA
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	300	NA
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	NA
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	NA
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	300	NA
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	300	NA
7 -Table 2- i(Fineness 4031 Part 2)	-	700	NA
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	600	NA
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	600	NA
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	NA
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	NA
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	NA
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	NA
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	NA
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2000	NA
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1200	NA
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	N.A.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	300	N.A.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	N.A.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	N.A.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	300	N.A.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	300	N.A.
7 -Table 2- i(Fineness 4031 Part 2)	-	700	N.A.
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	600	N.A.
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	600	N.A.
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	N.A.
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	N.A.
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	N.A.
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	N.A.
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	N.A.
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2000	N.A.
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1200	N.A.

17 Jun, 2027

-
Exclusion: 4 (Raw material)

14465

DELHI TEST HOUSE, Azadhpur

8131406

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	NA
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	300	NA
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	NA
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	NA
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	300	NA
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	300	NA
7 -Table 2- i(Fineness 4031 Part 2)	-	700	NA
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	600	NA
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	600	NA
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	NA
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	NA
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	NA
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	NA
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	NA
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2000	NA
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1200	NA
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	N.A.
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	300	N.A.
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	N.A.
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	N.A.
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	300	N.A.
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	300	N.A.
7 -Table 2- i(Fineness 4031 Part 2)	-	700	N.A.
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	600	N.A.
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	600	N.A.
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	N.A.
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	N.A.
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	N.A.
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	500	N.A.
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	N.A.
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2000	N.A.
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1200	N.A.

17 Jun, 2027

-
-

14466

BIS, Southern Regional Laboratory (SRL)

None

IS 774 (2004)

Flushing cisterns for water closets and urinals (Other Than Plastic Cisterns) - Specification (Fifth Revision)

Rs. 8020/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (CONSTRUCTION-Cistern)	-
5.2 (Cover)	-
5.3 (Flush Pipe-For high density polyethylene and unplasncized PVC pipes, the outside diameter of the pipes shall be 40 mm)	-
5.3 (Flush Pipe-whereas the lead flush pipe shall have a mimmum thickness of 3 5 mm)	-
5.3.1 (Flush Pipe Connection to Cistern- The length ofthe outlet shall be 37 ± 2 mm)	-
5.3.1 (Flush Pipe Connection to Cistern-The nommal mternal diameter of the cistern outlet shall be not less than 32 mm for high-level cisterns)	-
5.3.1 (Flush Pipe Connection to Cistern)	-
5.3.1 (Flush Pipe Connection to Cistern- )	-
5.4 (Inlet and Overflow Holes)	-
5.4 (Inlet and Overflow Holes-)	-
5.6 (Lever)	-
5.7 (Chain)	-
5.8 (Overflow Pipe-)	-
7.1 (OPERATIONAL AND PERFORMANCE REQUIREMENTS- Flushing Arrangement)	-
7.2 (Working Water Level-The working water level shall be a minimum of 65 cm below the effective top edge of the cistern and shall be legibly and permanently marked on the inside of the cistern)	-
7.3 (Freedom from Self-Siphonage)	-
7.4 (Reduced Water Level)	-
7.5,8.1 (Discharge Capacity-Dual-flush cisterns of of 6/3 litre capacity shall discharge 6 ± 0.5 litres and alternatively a reduced flush of 3 ± 0.5 litre.’)	-
7.6,8.2 (Discharge Rate-The discharge rate for flushing cistern of 10/5 litre capacity shall be 10 ± 0.5 litre within 6 s and 5 ± 0.5 litre within 3 s for full and reduced flush respectively)	-
7.6,8.2 (Discharge Rate-The discharge rate for flushing cistern of 6/3 litres capacity shall be 6 ± 0.5 litres within 4 s and 3 ± 0.5 litre within 2 s for full and reduced flush respectively.)	-

-
" 1 pc Excluding *excl endurance test

14467

BIS, Southern Regional Laboratory (SRL)

None

IS 4964 (2013)

Textiles – Vests, cotton, plain (Single jersey) knitted – Specification (fifth revision)

testing charges for the product are Rs 6400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4/4.1/4.1.1 (MANUFACTURE AND FINISH- Fabric-The mass of the vest-method given in B-5.)	-
4/4.2-Fig. 1A, Fig. 1B, Fig. 2A, Fig. 2B, Fig. 3. (MANUFACTURE AND FINISH)	-
4/4.2/4.2.1 (MANUFACTURE AND FINISH)	-
4/4.3/4.3.1-see IS 11161, see IS 10789, Table 1. (MANUFACTURE AND FINISH-Seams and Stitches)	-
4/4.3/4.3.2-according to B-4 (MANUFACTURE AND FINISH-Seams and Stitches-Dimension)	-
4/4.6 (MANUFACTURE AND FINISH-Freedom from Defects)	-
5/5.1-Tables 2 and 3 (REQUIREMENTS-Dimensions-method prescribed in Annex B.)	-
5/5.2-Tables 4 (REQUIREMENTS-Other Requirements-Dimension)	-

-
" 4 nos. Excluding Complete for Undyed vests, Color Fastness test facility not available for dyed vests

14468

Aforeserve Labs Private Limited, Gurugram

9140626

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

40000 View breakup
Rs. 40000/- for Lithium System [10% Discount to BIS ]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Venting)	-	1739	10% DISCOUNT TO BIS
5.4(Temperature, Voltage and Current Management)	-	1739	10% DISCOUNT TO BIS
5.5(Terminal Contacts)	-	1739	10% DISCOUNT TO BIS
5.6(Assembly of Cells into batteries)	-	1739	10% DISCOUNT TO BIS
5.7(Quality Plan)	-	1739	10% DISCOUNT TO BIS
5.8(Battery Safety Components)	-	1739	10% DISCOUNT TO BIS
6(Type Test and Sample Size)	-	1739	10% DISCOUNT TO BIS
7(Specific requirements and tests)	-	1739	10% DISCOUNT TO BIS
7.1(Charging procedure for test purposes)	-	1739	10% DISCOUNT TO BIS
7.2(Intended Use)	-	1739	10% DISCOUNT TO BIS
7.3(Reasonably foreseeable misuse)	-	1739	10% DISCOUNT TO BIS
8(Information for safety)	-	1739	10% DISCOUNT TO BIS
8.1(General)	-	1739	10% DISCOUNT TO BIS
8.2(Small Cell and battery safety information)	-	1739	10% DISCOUNT TO BIS
9(Marking)	-	1739	10% DISCOUNT TO BIS
9.1(Cell Marking)	-	1739	10% DISCOUNT TO BIS
9.2(Battery Marking)	-	1739	10% DISCOUNT TO BIS
9.3(Caution for ingestion of small cells and batteries)	-	1739	10% DISCOUNT TO BIS
10(Packaging)	-	1739	10% DISCOUNT TO BIS
4(Parameter Measurement Tolerances)	-	0	10% DISCOUNT TO BIS
5(General Safety Considerations)	-	0	price included in sub clauses
5.1(General)	-	0	price included in sub clauses
5.2(Insulation and Wiring)	-	1500	10% DISCOUNT TO BIS

06 Jun, 2027

-
Exclusion : Clause 7.3.1 of IS 16047: Part 3

14469

Aforeserve Labs Private Limited, Gurugram

9140626

IS 16046 : Part 1 (2018)

40000 View breakup
Rs. 40000/- for nickel System [10% Discount to BIS ]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	10% DISCOUNT TO BIS
5(General Safety Considerations)	-	0	10% DISCOUNT TO BIS
5.1(General)	-	0	10% DISCOUNT TO BIS
5.2(Insulation and Wiring)	-	3000	10% DISCOUNT TO BIS
5.3(Venting)	-	3000	10% DISCOUNT TO BIS
5.4(Temperature, Voltage and Current Management)	-	3000	10% DISCOUNT TO BIS
5.5(Terminal Contacts)	-	3000	10% DISCOUNT TO BIS
5.6(Assembly of Cells into batteries)	-	3000	10% DISCOUNT TO BIS
5.7(Quality Plan)	-	3000	10% DISCOUNT TO BIS
6(Tyoe Test amd Sample Size)	-	0	10% DISCOUNT TO BIS
7(Specific requirements and tests)	-	0	10% DISCOUNT TO BIS
7.1(Charging procedure for test purposes)	-	4000	10% DISCOUNT TO BIS
7.2(Intended Use)	-	4000	10% DISCOUNT TO BIS
7.3(Reasonably foreseeable misuse)	-	5000	10% DISCOUNT TO BIS
8(Information for safety)	-	0	10% DISCOUNT TO BIS
9(Marking)	-	3000	10% DISCOUNT TO BIS
9.1(Cell Marking)	-	0	10% DISCOUNT TO BIS
9.2(Battery Marking)	-	0	10% DISCOUNT TO BIS
9.3(Caution for ingestion of small cells and batteries)	-	3000	10% DISCOUNT TO BIS
9.4(Other information)	-	0	10% DISCOUNT TO BIS
10(Packaging)	-	3000	10% DISCOUNT TO BIS

06 Jun, 2027

-
-

14470

Testtex India Laboratories Private Limited, Noida

8138306

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

All

1500 View breakup
Rs. 1,500/- + GST (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1500	10% discount to BIS
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	1500	10% discount to BIS
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	1500	10% discount to BIS
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	1500	10% discount to BIS
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	1500	10% discount to BIS
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	1500	10% discount to BIS
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	1500	10% discount to BIS
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	500	10% discount to BIS
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	1500	10% discount to BIS
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	1500	10% discount to BIS
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	500	10% discount to BIS

31 Dec, 2029

-
Included w.e.f. 31-12-2020

14471

DELHI TEST HOUSE, Azadhpur

8131406

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

33, 43, 43S, 53 & 53S

9500 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 iii.(Insoluble residue)	-	500	N.A.
6.1 Table-2 vii(Chloride content)	-	300	N.A.
6.1 Table-2 vi(Loss on ignition)	-	500	N.A.
6.1 Table-2 viii(Alkali content)	-	500	N.A.
7 Table-3 i.(Fineness)	-	700	N.A.
7 Table-3 ii a(Expansion by Le Chatelier)	-	600	N.A.
7 Table-3 ii b(Expansion by Autoclave)	-	600	N.A.
7 Table-3 iii a(Setting Time Initial)	-	400	N.A.
7 Table-3 iii b(Setting Time Final)	-	400	N.A.
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	N.A.
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	650	N.A.
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	650	N.A.
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1200	N.A.

17 Jun, 2027

-
Included w.e.f. 28-09-2018

14472

BIS, Central Laboratory (CL)

None

IS 13502 (1992)

Pig iron - Specification

4660/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Size and Mass)	-

-
Sample Size 5 pcs of 5x5 cm having dia > 3mm and thickeness > 0.8 mm; EXCLUDING Except Silicon > 2.0 %;

14473

DELHI TEST HOUSE, Azadhpur

8131406

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

17400 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1300	For BIS samples 1.5 times of BIS testing charges
5.4.2(a)( Aggregates Impact Value)	-	700	For BIS samples 1.5 times of BIS testing charges
5.4.3(a)( Aggregate Abrasion Value)	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	1000	For BIS samples 1.5 times of BIS testing charges

17 Jun, 2027

-
Only for aggregates from natural sources

14474

CIPET: CSTS, CHHATRAPATI SAMBHAJINAGAR

7123534

IS 16098 Part 2 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

99000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2029

-
-

14475

CIPET: CSTS, CHHATRAPATI SAMBHAJINAGAR

7123534

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

49525 View breakup
Rs. 49525/-; For BIS Samples : Rs. 31,869/- ; Raw Material : Rs. 5,825/-; For BIS Sample : Rs. 4,525/-; For Carbon Black Master Batch : Rs. 1,875/-; For BIS Sample : Rs. 1,406/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, 5.1 table-1(MATERIALS)	-	0	--
5.2(Polyethylene Resin)	-	1050	--
5.3 (a)(Carbon Black Master Batch)	-	1875	925+950
5.3(b)(Carbon Black Master Batch)	-	500	--
5.3(c)(Carbon Black Master Batch)	-	900	--
5.3(d)(Carbon Black Master Batch)	-	700	--
5.3(e)(Carbon Black Master Batch)	-	950	--
8.3(Carbon black)	-	925	--
8.6(Overall migration)	-	2000	1700+300
6, 6.1(PIPE DESCRIPTION)	-	0	--
6.2(Colour)	-	300	--
6.2.1(6.1.1 Identification Stripes)	-	250	--
7.2(Length)	-	250	--
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	500	--
7.4.1.2(Ovality)	-	250	--
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	100 hrs test=4000 48 hrs test =1600 165 hrs test =4800 1000 hrs test = 11000
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	--
8.2(Longitudinal Reversion Test)	-	900	700+200
8.4( Melt Flow Rate)	-	1100	--
8.5 (Oxidation Induction Time)	-	2200	--
8.7(Density)	-	500	--
8.8(Tensile Strength for Butt-fusion)	-	1600	--
8.9 table-6(Elongation at Break)	-	1600	--
8.10(Slow Crack Growth Rate)	-	6000	5500+500

31 Dec, 2029

-
Size upto 400mm

14476

BIS, Central Laboratory (CL)

None

IS 9890 (1981)

Specification for general purpose ball valves

Rs 4520/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Nom. size. )	-
5 (End connections)	-
6 (Drain Connection)	-
7 (Joints)	-
10 (Trim)	-

-
complete

14477

BIS, Central Laboratory (CL)

None

IS 7181 (1986)

Specification for horizontally cast iron double flanged pipes for water, gas and sewage (First Revision)

Rs.6600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Manufacture)	-
3.2 (Manufacture)	-
3.3 (Manufacture)	-
3.4 (Manufacture)	-
3.5 (Manufacture)	-
5.1 (Tensile Test)	-
7.1 (Sizes and Mass)	-
7.2 (Sizes and Mass)	-
7.3 (Sizes and Mass)	-
7.3 (Sizes and Mass)	-
7.4 (Sizes and Mass Dimensions of Flange)	-
7.4 (Sizes and Mass Dimensions of Flange)	-
9 (Coating)	-

-
Since the composition of cast iron shall be left to the discretion ofthe manufacturer , as such element to be tested with specified requirement and tolerances if any may please be declared with method of testing. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm.;

14478

BIS, Central Laboratory (CL)

None

IS 4123 (1982)

Specification for chain pipe wrenches (First Revision)

Rs 2700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 Table 1 (Dimensions- Nominal Size)	-
3 Table 1 (Dimensions- Capacity, D min)	-
3 Table 1 (Dimensions- Capacity, D max)	-
3 Table 1 (Dimensions- Length , L)	-
3 Table 1 (Dimensions- Length of Jaw, L1)	-
3 Table 1 (Dimensions- Width of Jaw, E)	-
3 Table 1 (Dimensions- Dia of Handle, d)	-
3 Table 1 (Dimensions- Thickness of Jaw, T)	-
3 Table 1 (Dimensions- Length of Chain)	-
3 Table 1 (Dimensions- Chain Pitch, P)	-
6.1 (Construction- Handel)	-
6.2 (Construction- Jaws)	-
6.3 (Construction- Chain)	-
7.1 (Workmanship and Finish )	-
7.2 (Workmanship and Finish )	-
9 (Test)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; EXCLUDING -; Torque test for above size 80mm

14479

BIS, Central Laboratory (CL)

None

IS 1537 (1976)

Specification for vertically cast iron pressure pipes for water, gas and sewage (First Revision)

Rs. 3972/- (for flanged ends only) + materials as per View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 , 6 of IS 210 ( The composition of cast iron shall be left to the discretion of the manufacturer)	-
4.1 (Tensile Strength)	-
4.2 (Hardness test)	-
7.1 & Table 2 (DE)	-
7.1 & Table 2 (DI)	-
7.1 & Table 2 (P)	-
7.1 & Table 2 (g)	-
7.1 & Table 2 (h)	-
7.1 & Table 2 (DC)	-
7.1 & Table 2 (c)	-
7.1 & Table 2 (f)	-
7.1 & Table 3 (DI)	-
7.1 & Table 3 (P)	-
7.1 & Table 3 (g)	-
7.1 & Table 2 (h)	-
7.1 & Table 4 (D)	-
7.1 & Table 4 (a)	-
7.1 & Table 4 (b)	-
7.1 & Table 4 (s)	-
7.1 & Table 4 (r)	-
7.1 & Table 5 (D)	-
7.1 & Table 5 (C)	-
7.1 & Table 5 (Holes Number)	-
7.1 & Table 5 (Holes Diameter)	-
7.1 & Table 5 (Diameter of Bolts)	-
7.1 & Table 6 to 8 (DE)	-
7.1 & Table 6 to 8 (t)	-
7.1 & Table 6 to 8 (Mass of one meter barrel (Approx))	-
8.4 (Permissible deviation from a straight line)	-
7.1 & Table 6 to 8 (Socket mass (Approx))	-
9.1,Table 9 (Working Length)	-
10.1 to 10.6 (Coating )	-

14480

CIPET: CSTS, CHHATRAPATI SAMBHAJINAGAR

7123534

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

4700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	300	Construction & Workmanship
7.2(Flow path in emitters)	-	300	Flow Path in Emitter
7.3.1(Resistance to Hydrostatic pressure)	-	999.99	Resistance to Hydrostatic pressure
7.3.2(Resistance to Hydrostatic pressure)	-	0	included in 7.3.1
7.3.3(Resistance to Hydrostatic pressure)	-	0	included in 7.3.1
7.4.1(Emitter Pull Out In-line emitters)	-	500	Emitter Pullout
7.4.2(Emitter Pull Out On-line emitters)	-	0	Included in 7.4.1
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000	Uniformity of emission rate
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	0	Included in 8.1.2
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	1000	Emission rate as a function of inlet pressure
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	0	Included 8.2.2
8.3(Determination of Emitter Exponent)	-	600	Determination of Emitter Exponent

31 Dec, 2029

-
-

14481

BIS, Central Laboratory (CL)

None

IS 11722 (1986)

Specification for thin walled flexible quick coupling pipes

4800 View breakup
Rs.4800/- (excluding Hydraulic test) and material testing charges as per relevant referred ISs

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Pipe Manufacturing Process )	-
5,5.1 (Workmsnship &Finish)	-
6 &7 ; Table 1 (Dimension & Tolerance)	-
8 (Length)	-
9 (Galvanizing ,IS 4736)	-
10,10.1 (Couplers for thin walled coupling pipes ; Appendix A)	-
10,10.2 ,Table 1 (Coupler,Type 1B, IS 5382)	-
12 (Straightness)	-
13.1 (Flattening Test,IS 2328)	-

-
-

14482

BIS, Central Laboratory (CL)

None

IS 9523 (2000)

Ductile iron fittings for pressure pipes for water, gas and sewage - Specification (First Revision)

Rs.7245.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Thickness)	-
Cl 9 (Tensile Test & Hardness Test)	-
Cl 10 (Hydrostatic Test)	-
Cl 11 (Nominal Diameter, Ovality, Dimensions, No. Of Holes & Bolt Sizes)	-
Cl 13 (Coating)	-
Cl 5 (Thickness)	-

-
-

14483

BIS, Central Laboratory (CL)

None

IS 704 (1984)

Specification for crow - Bars and claw - Bars (Second Revision)

Total Rs.11x 300 = Rs.3300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (Type)	-
3 Table-1 to 9 (Shapes And Dimensions-Width across flats )	-
3 Table-1 to 9 (Shapes And Dimensions-Diameter of bars)	-
7 (Manufacture and Finish)	-
8.1 (Drop Test)	-

-
-

14484

CIPET: CSTS, CHHATRAPATI SAMBHAJINAGAR

7123534

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

11625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	925	Carbon black content *
4.2.3(Carbon Dispersion Test)	-	700	Carbon black content
5(Types and Features )	-	3100	Net & Gross Capacity 500 Overall Diameter 250 Overall Height 250 Internal dia of man - hole 250 Wall thickness upon effective height 250 Wall thickness above effective height 250 Minimum weight without lid 500
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	included in Types and feature
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	included in Types and feature
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	included in Types and feature
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	included in Types and feature
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	included in Types and feature
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	included in Types and feature
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0	included in Types and feature
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	included in Types and feature
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	included in Types and feature
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	included in Types and feature
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	included in Types and feature
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	included in Types and feature
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0	included in Types and feature
5.3(Types and Features )	-	0	included in Types and feature
5.6(Types and Features )	-	0	included in Types and feature
6.1(Finish)	-	300	Finish / Visual Appearance
7.1.1(Resistance to Deformation)	-	700	Resistance to deformation
7.1.2(Resistance to Deformation)	-	0	Resistance to deformation
7.2(Resistance to Impact)	-	1100	Resistance to impact
7.3(Test for Top Load Resistance)	-	900	Top load resistance (for 1500 lit and more)
7.4(Tensile Strength)	-	1100	Tensile Strength
7.5(Flexural Modulus)	-	1100	Flexural modulus
7.6(overall Migration)	-	1700	Overall Migration 40°C / Water/ 10 days

31 Dec, 2029

-
-

14485

Research & Development Centre for Bicycle and Sewing Machine, Ludhiana

9100634

IS 2414 (2005)

Cycle and rickshaw pneumatic tyres - Specification (Fourth Revision)

14700 View breakup
Rs.14700/- + GST

Clause No.	Exclusion	Remark
5.1 & 5.2(Dimensions)	-	+ GST@18%
6.2(Tyre Cord)	-	--
6.3(Tyre Casing Strength)	-	--
6.4(Bead Wire Joint)	-	--
6.5(Requirements of Ruber Compound)	-	--
6.6(Adhesion test)	-	--
6.7(Performance test)	-	--

-
0.0

14486

BIS, Central Laboratory (CL)

None

IS 884 (1985)

Apecification for first - Aid hose - Reel for fire fighting (First Revision)

2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Dimensions)	-
Cl 5.1 (Dimensions)	-
Cl 5.1 (Dimensions)	-
Cl 5.2 (Resistance to Leakage)	-
Cl 5.5 (Swinging)	-
Cl 5.6 (Reel Action)	-
Cl 6 (Workmanship)	-
Cl 7 (Painting)	-

-
EXCLUDING Impact resistance,Load resistance,Range & flow rate

14487

Matrix Test Labs

8138626

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	5000	10% discount to BIS
8(Protection against live parts)	-	5000	10% discount to BIS
10(POWER INPUT AND CURRENT)	-	10000	10% discount to BIS
11(HEATING)	-	10000	10% discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	5000	10% discount to BIS
15(HUMIDITY TREATMENT TEST)	-	5000	10% discount to BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	5000	10% discount to BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	5000	10% discount to BIS
18(ENDURANCE)	-	35000	10% discount to BIS
19(ABNORMAL OPERATION)	-	10000	10% discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	5000	10% discount to BIS
21(MECHANICAL STRENGTH)	-	5000	10% discount to BIS
22(CONSTRUCTION)	-	5000	10% discount to BIS
23(INTERNAL WIRING)	-	5000	10% discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	5000	10% discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	5000	10% discount to BIS
27(PROVISION FOR EARTHING)	-	5000	10% discount to BIS
28(SCREWS AND CONNECTIONS)	-	5000	10% discount to BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5000	10% discount to BIS
30(RESISTANCE TO HEAT AND FIRE)	-	5000	10% discount to BIS
31(RESISTANCE TO RUSTING)	-	10000	10% discount to BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	10000	10% discount to BIS
6.0(Classification)	-	0	-
24(COMPONENTS)	-	15000	10% discount to BIS
14(IMPULSE VOLTAGE TEST)	-	25000	10% discount to BIS

31 Dec, 2029

-
Excluding: EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Cord Reel Test Set-up (Cl.22.16), Software (Cl.22.46), Water Pressure Inlet (Cl.22.47), Interlocks (Cl.22.106), Component (Cl.24), Appliance for board ships (Annex-BB) & Salt spray test (Annex-CC).

14488

Matrix Test Labs

8138626

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	5000	10% discount to BIS
8(Protection against accidental contact with live parts)	-	5000	10% discount to BIS
9(Terminals)	-	5000	10% discount to BIS
10(PROVISION FOR EARTHING)	-	5000	10% discount to BIS
11(MOISTURE RESISTANCE)	-	5000	10% discount to BIS
12(Electric Strength)	-	5000	10% discount to BIS
14(Fault conditions)	-	10000	10% discount to BIS
15(Transformer heating)	-	15000	10% discount to BIS
16(Construction)	-	5000	10% discount to BIS
17(Creepage distance and clearances)	-	5000	10% discount to BIS
18(Screws, current carrying parts and connections)	-	5000	10% discount to BIS
19(Resistance to heat, fire and tracking)	-	10000	10% discount to BIS
20(Resistance to corrosion)	-	10000	10% discount to BIS

31 Dec, 2029

-
Excluding: Components: Enclosure, Bridging resistor in primary circuit, Capacitor and RC units, RF suppression (X-Y capacitors), Inductor, MOV/VDR, SMPS/Mains Transformer, PCB material, Metal base PCB for LED, Transparent cover, Bobbin, Insulated tape, Heat shrinkage sleeve, Connector, Fuse, Internal wire, LED, Opto-coupler, EMI/EMC filter, Winding wire, Thin sheet materials etc.

14489

Matrix Test Labs

8138626

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	5000	10% Discount to BIS
6(Interchangeability)	-	10000	10% Discount to BIS
7(Protection against accidental contact with live parts)	-	5000	10% Discount to BIS
8(Insulation Resistance and Electric Strength)	-	15000	10% Discount to BIS
9(MECHANICAL STRENGTH)	-	10000	10% Discount to BIS
10(cap temperature)	-	10000	10% Discount to BIS
11(Resistance to Heat)	-	10000	10% Discount to BIS
12(Resistance to Flame and Ignition)	-	10000	10% Discount to BIS
13(Fault conditions)	-	10000	10% Discount to BIS
14(Creepage distance and clearances)	-	5000	10% Discount to BIS

31 Dec, 2029

-
Restricted to Cap type B22d, E14 & E27 only.

14490

BIS, Central Laboratory (CL)

None

IS 12823 (2015)

Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 10.13 & Annex F ( Test For Resistance to Cigarette Burn)	-
Cl 10.12 & Annex E ( Test For Crack Resistance)	-
Cl 10.9 (Test For Screw Withdrawal Strength)	-
Cl 10.8 (For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-
Cl 10.7 (For Determination of Tensile Strength Perpendicular to Surface)	-
Cl 10.6 (Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-
Cl 10.5 (For Swelling in water Test )	-
Cl 10.4 (For Water AbsorptionTest )	-
Cl 10.3 (Test For Moisture Content)	-
Cl 10.2 (Test For Density)	-
Cl 8 (Dimensions & Tolerances)	-
Cl 7 (Finish)	-
Cl 6 (Manufacture)	-
Cl 10.15 (Test for Formaldehyde Content/Emission)	-

-
Sample Test Parameter not available in CL: "10.4 Test for Water Absorption, 10.5 Test for Swelling in Water, 10.6 Test for Modulus of Rupture (MOR) and Modulus of Elasticity (MOE), 10.8 Test for Tensile Strength Perpendicular to Surface After Ageing, 10.10 Test for Abrasion Resistance, 10.11 Test for Resistance to Steam, 10.14 Test for Resistance to Stain." SIZE: One Board For All Tests Sample Size without dimensional measurements:Length-1200 mm, width-1200

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found