BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15633 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

14431

DELHI TEST HOUSE, Azadhpur

8131406

IS 14542 (1998)

Partly skimmed milk powder specification

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(i)(Moisture Type I (IS 11623))	-	500	-
Table 1(i)(Moisture Type II (IS 11623))	-	500	-
Table 1(ii)(Total solids (milk solids and added salts) Type I (IS 11623))	-	400	-
Table 1(ii)(Total solids (milk solids and added salts) Type II (IS 11623))	-	400	-
Table 1(iii)(Milk fat, Type I (IS I1722))	-	400	-
Table 1(iii)(Milk fat, Type II (IS I1722))	-	400	-
Table 1(iv)(Insolubility index, a) Roller dried Type I (IS 12759))	-	400	-
Table 1(iv)(Insolubility index, a) Roller dried Type II (IS 12759))	-	400	-
Table 1(iv)(Insolubility index, b) Spray dried Type I (IS 12759))	-	400	-
Table 1(iv)(Insolubility index, b) Spray dried Type II (IS 12759))	-	400	-
Table 1(v)(Total ash Type I (Annex B of IS 14433 - Part 1))	-	500	-
Table 1(v)(Total ash Type II (Annex B of IS 14433 - Part 1))	-	500	-
Table 1(vi)(Titratable acidity (as lactic acid) Type I (IS 11766))	-	400	-
Table 1(vi)(Titratable acidity (as lactic acid) Type II (IS 11766))	-	400	-
Cl 6.4(Flavour and Taste (IS 10030))	-	200	-
Cl 6.6.1(Bacterial Count (IS 5402))	-	500	-
Cl 6.6.2(Coliform Count ((IS 5402))	-	500	-

17 Jun, 2027

-
-

14432

ELECTRONICS AND QUALITY DEVELOPMENT CENTRE - EQDC, GANDHINAGAR

7118234

IS 13779 (1999)

AC static watihour meters, class 1 and 2 - Specification (First Revision)

975 View breakup
Type Tests : Rs. 1,05,000/- (For Single Phase and Three Phase); Acceptance Tests : Rs. 14,250/- (For Single Phase and Three Phase); Routine Tests : Rs. 8,625/- (For Single Phase and Three Phase).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 a)(MARKING OF METERS : Name Plate )	-	75	-
7.1 b)(MARKING OF METERS : Name Plate )	-	75	-
7.1 c)(MARKING OF METERS : Name Plate )	-	75	-
7.1 d)(MARKING OF METERS : Name Plate )	-	75	-
7.1 e)(MARKING OF METERS : Name Plate )	-	75	-
7.1 f)(MARKING OF METERS : Name Plate )	-	75	-
7.1 g)(MARKING OF METERS : Name Plate )	-	75	-
7.1 h)(MARKING OF METERS : Name Plate )	-	75	-
7.1 j)(MARKING OF METERS : Name Plate )	-	75	-
7.1 k)(MARKING OF METERS : Name Plate )	-	75	-
7.1 m)(MARKING OF METERS : Name Plate )	-	75	-
7.1 p)(MARKING OF METERS : Name Plate )	-	75	-
7.1 n)(MARKING OF METERS : Name Plate )	-	75	-
12.7.6.1( Test of insulation Properties : General test conditions )	-	0	Charges are already given in clause 12.7.6.2 , 12.7.6.3 ,12.7.6.4
12.7.6.2(Impulse voltage test)	-	4000	-
12.7.6.3(ac Voltage test)	-	1000	-
12.7.6.4(Insulation resistance test)	-	1000	-
12.10.1 a)(Testof Accuracy Requirements : General Test Conditions )	-	1000	-
12.10.1 b)(Testof Accuracy Requirements : General Test Conditions )	-	1000	-
12.10.1 c)(Testof Accuracy Requirements : General Test Conditions )	-	1000	-
12.10.1 d)(Testof Accuracy Requirements : General Test Conditions )	-	1000	-
12.10.1 e)(Testof Accuracy Requirements : General Test Conditions )	-	1000	-
12.10.1 f)(Testof Accuracy Requirements : General Test Conditions )	-	1000	-
11.1(Limits of Error and Interpretation or Test Results)	-	0	-
12.16 a)(Limits of Error and Interpretation or Test Results)	-	200	-
12.16 b)(Limits of Error and Interpretation or Test Results)	-	200	-
12.16 c)(Limits of Error and Interpretation or Test Results)	-	200	-
12.15(Test of Meter Constant/Registration)	-	1000	-
12.14(Test of Starting Conditions)	-	1000	-
12.13(Test of No-Load Condition)	-	1500	-
12.12(Test ofAmbient Temperature Influence)	-	1500	-
12.17(Repeatability of Error Test )	-	1500	-
12.11(Test of Iniluence Quantities)	-	5000	-
12.7.1(Test of Power Consumption)	-	1500	-
12.7.2(Test of Influence of Supply Voltage)	-	1500	-
12.7.3( Test of Influence of Short-time Overcurrents)	-	2000	-
12.7.4(Test of Influence of Self-Heating)	-	2000	-
12.7.5(Test of Influence of Heating)	-	2000	-
12.8(TestorImmunity to Earth Fault)	-	1000	-
12.4(Testof Resistance to Heat and Fire )	-	4000	-
12.3.3( Spring Hammer Test)	-	2000	-
12.6.1(Dry Heat Test)	-	8000	-
12.6.2(Cold Test)	-	8000	-
12.6.3( Damp Heat Cycle Test)	-	8000	-
12.5 b)(Test of Protection Against Penetration of Dust and Water)	-	8000	-
12.3.2(Vibration Test)	-	6000	-
12.3.1(Shock Test)	-	5000	-
12.9.4(FastTransient BurstTest)	-	6000	-
12.9.2(Test for Immunity to Electrostatic Discharge (ESD))	-	6000	-
12.9.3(Test for Immunity to EIectromagnetic HF Fields)	-	6000	-
12.9.5(Radio Interference Measurement)	-	6000	-

09 Oct, 2027

-
Class1 and 2. Exclusion: Protection against solar radiation (Cl.12.6.4)

14433

DELHI TEST HOUSE, Azadhpur

8131406

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

12250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Type of Fitting)	-	100	NA
5(Colour of fittings)	-	250	NA
7.1,Table 1(Wall thickness)	-	100	NA
7.2 ,Table 2&3(Socket Dimensions)	-	100	NA
7.3(Dimensions of waste trap(Nahani Trap)	-	100	NA
8(Sealing Rings)	-	500	NA
10(Workmanship)	-	100	NA
11(Design requirements)	-	100	NA
12.1(Visual appearance)	-	250	NA
12.2(Stress relief test)	-	1500	NA
12.3(Vicat softening tempewrature)	-	1000	NA
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	NA
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1000	NA
Cl.15, Annex B(Sulphated Ash Content)	-	1500	NA
16.1(Impact test)	-	1500	NA
17(Watet tightness of joint)	-	1500	NA
19(Marking)	-	100	NA
4(Size Designation)	-	200	-
11.1(Solvent cement type or Rubber ring type)	-	200	-
11.2(Socket and spigot configeration)	-	200	-
11.4,Table 5(Vent cowl)	-	200	-
11.5,Table 6(Pipe Clips)	-	200	-

17 Jun, 2027

-
-

14434

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 3309 (2022)

SOLUBLE COFFEE-CHICORY POWDER - SPECIFICATION (THIRD REVISION OF IS 3309)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.4,Table 1,sl.no-i (Moisture)	-
Cl-3.4,Table 1,sl.no-iii (Total ash(on dry basis))	-
Cl-3.5 (Copper content)	-
3.1 (Description-IS 3309)	-
Cl-3.4,Table 1,sl.no-iv (Solubility in boiling water)	-
Cl-3.4,Table 1,sl.no-v (Solubility in cold water)	-
3.3 (Cup Test-2791)	-

-
Test facility is not available for Caffeine.

14435

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 2791 (1992)

Soluble coffee powder - Specification (Third Revision)

4126 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.4 Table 1 (Moisture content)	-
3.4 Table 1 (Total ash)	-
3.1 (Description )	-
3.4 Table 1 (Solubility in boiling)	-
3.4 Table 1 (Solubility in cold water)	-

-
Test facility is not available for Caffeine.

14436

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 612 (1992)

Roasted chicory powder - Specification (Third Revision)

The testing charges for the product are Rs 3400.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.5 Table 1 (Acid Insoluble ash)	-
3.5 Table 1 (Total Ash)	-
3.5 Table 1 (Moisture)	-
3.5 Table 1 (Water soluble Matter )	-
3.5 Table 1 (Acid Insoluble ash)	-
3.5 Table 1 (Water soluble Matter )	-
3.1 (Description)	-
3.2 (Cup Test)	-
3.3 (Microscopic Appearance)	-

-
Complete for chemical section.

14437

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 4964 (2013)

Textiles – Vests, cotton, plain (Single jersey) knitted – Specification (fifth revision)

testing charges for the product are Rs 6400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4/4.1 (MANUFACTURE AND FINISH- Fabric-see IS 9469)	-
4/4.1/4.1.1 (MANUFACTURE AND FINISH- Fabric-The mass of the vest-method given in B-5.)	-
4/4.1/4.1.2 (MANUFACTURE AND FINISH- Fabric-)	-
4/4.1/4.1.3 (MANUFACTURE AND FINISH- Fabric-)	-
4/4.2-Fig. 1A, Fig. 1B, Fig. 2A, Fig. 2B, Fig. 3. (MANUFACTURE AND FINISH)	-
4/4.2/4.2.1 (MANUFACTURE AND FINISH)	-
4/4.3/4.3.1-see IS 11161, see IS 10789, Table 1. (MANUFACTURE AND FINISH-Seams and Stitches)	-
4/4.3/4.3.2-according to B-4 (MANUFACTURE AND FINISH-Seams and Stitches-Dimension)	-
4/4.3/4.3.3 (MANUFACTURE AND FINISH-Seams and Stitches)	-
4/4.4 (MANUFACTURE AND FINISH)	-
4/4.6 (MANUFACTURE AND FINISH-Freedom from Defects)	-
5/5.1-Tables 2 and 3 (REQUIREMENTS-Dimensions-method prescribed in Annex B.)	-
5/5.2-Tables 4 (REQUIREMENTS-Other Requirements-Dimension)	-
5/5.3 (REQUIREMENTS-Sealed Sample)	-
5.2 Table 4 (i) b (Other Requirements - Dimensional change due to relaxation - Courses)	-
5.2 Table 4 (i) a (Other Requirements - Dimensional change due to relaxation - Wales)	-
5.1 Tables 3 (Neck Opening - Depth at Front 'J')	-
5.1 Tables 3 (Neck Opening - Depth at Back 'H')	-
5.1 Tables 3 (Width at Sleeve End 'G')	-
5.1 Tables 3 (Width of Armhole 'F')	-
5.1 Tables 3 (Length of Sleeves Including Welting 'E')	-
5.1 Tables 2 and 3 (VN/ VNS - Depth of Neck Opening 'F')	-
5.1 Tables 2 and 3 (VN/ VNS - Width of Neck Opening 'E')	-
5.1 Tables 2 and 3 (RN - Width of Shoulder Strap 'G')	-
5.1 Tables 2 and 3 (RN - Opening Back 'F1')	-
5.1 Tables 2 and 3 (RN - Depth of Neck Front 'F')	-
5.1 Tables 2 and 3 (Round Neck Opening RNS 'E')	-
5.1 Tables 2 and 3 (Length of Armhole RN/RNS VN/VNS 'D')	-
5.1 Tables 2 and 3 (Length of Sleeves RNS/VNS 'C')	-
5.1 Tables 2 and 3 (Length of Vest 'B')	-
5.1 Tables 2 and 3 (Width Across Chest 'A')	-
5.1 NOTE (Requirements - Size of Vest)	-
4.5 (The tailored vest may also be screen or transfer printed with motifs or designs as agreed to between the buyer and the manufacturer.)	-
4.3.2 (Width of tape/welt at neck opening for VN/VNS vest and at armhole opening for VN vests)	-
4.3.2 (Width of tape/welt at bottom for all vests and at sleeves for RNS/ VNS/ RNW vest)	-
4.3.2 (Depth of hem at bottom for all vest and at sleeves for RNS/ VNS/ RNW vest)	-
4.3.2 (Width of folding at bottom for all vest and at sleeves for RNS/VNS vest)	-
4.3.2 (Depth of hem or width of folding at neck opening for RNS vest)	-
4.3.2 (Depth of hem or width of folding at neck and armhole opening for RN vest)	-
4.3.1-Table 1 (iv) (Seams and Stitches - Folding at armhole)	-
4.3.1-Table 1 (iv) (Seams and Stitches - Folding at armhole)	-
4.3.1-Table 1 (iv) (Seams and Stitches - Folding at neck opening)	-
4.3.1-Table 1 (iv) (Seams and Stitches - Folding at neck opening)	-
4.3.1-Table 1 (iv) (Seams and Stitches - Folding at sleeve)	-
4.3.1-Table 1 (iv) (Seams and Stitches - Folding at sleeve)	-
4.3.1-Table 1 (iii) (Seams and Stitches - Hemming at armholes)	-
4.3.1-Table 1 (iii) (Seams and Stitches - Hemming at armholes)	-
4.3.1-Table 1 (iii) (Seams and Stitches - Hemming at sleeves)	-
4.3.1-Table 1 (iii) (Seams and Stitches - Hemming at sleeves)	-
4.3.1-Table 1 (ii) (Seams and Stitches - Hemming at elbow ends of sleeves)	-
4.3.1-Table 1 (ii) (Seams and Stitches - Hemming at elbow ends of sleeves)	-
4.3.1-Table 1 (ii) (Seams and Stitches - Hemming at the bottom)	-
4.3.1-Table 1 (ii) (Seams and Stitches - Hemming at the bottom)	-
4.3.1-Table 1 (i) (Seams and Stitches - Tape/ welt sewn to neck-opening armholes, sleeves and bottom.)	-
4.3.1-Table 1 (i) (Seams and Stitches - Tape/ welt sewn to neck-opening armholes, sleeves and bottom.)	-
4.3.1-Table 1 (i) (Seams and Stitches - Sleeves to the vest and underarms)	-
4.3.1-Table 1 (i) (Seams and Stitches - Sleeves to the vest and underarms)	-
4.3.1-Table 1 (i) (Seams and Stitches - Shoulder pieces )	-
4.3.1-Table 1 (i) (Seams and Stitches - Shoulder pieces )	-
4.2 (Design and Shape of Vest)	-
4.1 (Fine/ Super fine/ Extra super fine)	-
4.1 (Manufacture and Finish - Fabric)	-

-
Excluding Cl 4.1 (Fabric), Cl 5.2 (other requirement) Table -4 , Sl (iii) Colour Fastness of dyed vest.

14438

KC INDIA TEST LABORATORIES LLP, GHAZIABAD

9140406

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

35000 View breakup
Rs.35,000/- for Electronic Video games, Power adapters for audio, video & similar electronic apparatus. Rs.35,000/- for Plasma/ LCD/ LED TV of screen size 32” & above, Plasma/ LCD/LED TVs of screen size up to 32”, Amplifiers with input power 2000W & above, Optical Disc Players with built in amplifier with input 2000W & above. Rs.35000/- Video Camera, Webcam (Finished Products), Smart Speaker (With and without display), Bluetooth Speakers.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Heating under normal operating conditions)	-	6500	20% discount to BIS
5(Marking and instructions)	-	650	20% discount to BIS
8(Constructional requirements with regard to the protection against electric shock)	-	5200	20% discount to BIS
9(Electric shock hazard under normal operating conditions)	-	5850	20% discount to BIS
10(Insulation requirements)	-	7800	20% discount to BIS
11(Fault conditions)	-	7150	20% discount to BIS
12(Mechanical strength)	-	3250	20% discount to BIS
13(CLEARANCES and CREEPAGE DISTANCES)	-	6500	20% discount to BIS
15(TERMINALS)	-	1300	20% discount to BIS
16(External flexible cords)	-	1300	20% discount to BIS
17(Electrical connections and mechanical fixings)	-	3250	20% discount to BIS
19(Stability and mechanical hazards)	-	3250	20% discount to BIS
20(Resistance to fire)	-	6500	20% discount to BIS

06 Jun, 2027

-
REVISED VERSON IS 616:2017. EXCLUSIONS: Ionizing radiation test (Cl.6.1), Laser radiation (Cl.6.2), Printed Boards(Cl.13.5), Component test (Cl.14), Mechanical strength of picture tubes & protection against the effect of implosion (Cl.18), Electrical Components (Cl.20.2.2), Internal wiring (Cl.20.2.3), Printed Boards (Cl.20.2.4), Components and parts (Cl.20.2.5), Fire Enclosure (Cl.20.3)

14439

KC INDIA TEST LABORATORIES LLP, GHAZIABAD

9140406

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

35000 View breakup
Laptop/ Notebook/ Tablet, Video monitors of screen size 32” & above, Printer, Plotter, Scanner, Visual display unit, Copying machines/ duplicators, Automatic data processing machine, Point of sale terminals & Cash Registers, Video monitors of screen size up to 32”, Smart Card Readers, Passport Reader, Banks for use in portable applications, Mobile phones, Wireless Keyboard/ Wired Keyboard, Set Top Box, Power adaptor for IT equipments, CCTV Cameras/ CCTV Recorders, Digital Camera. ADDITIONAL PRODUCTS INCLUDED W.E.F. 24-01-2022, mail processing machines / postage machines / franking machines / telephone answering machine= 35000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	1300	breakup
1.7(Markings and instructions)	-	650	breakup
2.1(Protection from electric shock and energy hazards)	-	4550	breakup
2.2(SELV circuits)	-	1625	breakup
2.4(Limited current circuits)	-	1105	breakup
2.5(Limited power sources .)	-	975	breakup
2.6(Provisions for earthing and bonding)	-	1040	breakup
2.7(Overcurrent and earth fault protection in primary circuits)	-	650	breakup
2.8(Safety interlocks)	-	1625	breakup
2.9(Electrical insulation)	-	3250	breakup
2.10(Clearances, creepage distances and distances through insulation)	-	8255	breakup
3.1(General)	-	3250	breakup
3.2(Connection to a mains supply)	-	1300	breakup
3.3(Wiring terminals for connection of external conductors)	-	1300	breakup
3.4(Disconnection from the mains supply)	-	650	breakup
3.5(Interconnection of equipment)	-	650	breakup
4.1(Stability)	-	325	breakup
4.2(Mechanical strength)	-	2080	breakup
4.3(Design and construction)	-	650	breakup
4.4(Protection against hazardous moving parts)	-	975	breakup
4.5(Thermal requirements)	-	2990	breakup
4.6(Openings in enclosures)	-	2925	breakup
4.7(Resistance to fire)	-	2925	breakup
5.1(Touch current and protective conductor curren)	-	845	breakup
5.2(Electric strength)	-	1300	breakup
5.3(Abnormal operating and fault conditions)	-	2600	breakup
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1300	breakup
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	3055	breakup
6.3(Protection of the telecommunication wiring system from overheating)	-	2600	breakup
7.1(General)	-	650	breakup
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	650	breakup
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	2275	breakup
7.4(Insulation between primary circuits and cable distribution systems)	-	2600	breakup

06 Jun, 2027

-
EXCLUSIONS: Component (Cl.1.5), Safety Interlocks: Moving parts (Cl.2.8.5), Switches & Relays (Cl.2.8.7),Semiconductor Devices (Opto-coupler test) (Cl.2.10.5.4), Insulation in wound components (Cl.2.10.5.11), Wire in wound components (Cl. 2.10.5.12), Tests for semiconductor devices & for cemented joints (Cl. 2.10.11), Cathode Ray Tube (Cl.4.2.8), Batteries (cl.4.3.8); Radiation (Cl.4.3.13), Electromechanical components (Cl. 5.3.5), Insulating winding wires (Annex U), Evaluation of IC current limiters (Annex CC).

14440

KC INDIA TEST LABORATORIES LLP, GHAZIABAD

9140406

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

18750 View breakup
Single Core Unsheathed Cable Rs. 7500.00 Single Core Sheathed Cable RS. 10300.00 Extra Charges For Outdoor Use Cable Rs.5625.00 Extra Charges For Low Temperature Use Cable Rs.2250.00 Charges For FR Cable Rs. 15000.00 Charges For FR-LSH Cable Rs.18750.00 Separated Wire Before Stranding (If Provided) Rs.900.00 Each Additional Core, Charge Per Core Rs. 2800.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	3125	20%discount to BIS
10.4(Flammability test- Unaffected portion)	-	625	20%discount to BIS
10.4(Flammability test-Burning after flame removal)	-	625	20%discount to BIS
10.1(HV (water immersion))	-	1875	For AC TEST 20%discount to BIS
10.1(HV (water immersion))	-	4375	FOR DC TEST 20%discount to BIS
10.5(Oxygen index)	-	4375	20%discount to BIS
10.7(Temperature index)	-	4375	20%discount to BIS
10.6(Halogen evolution)	-	3750	20%discount to BIS
10.2(HV (room temperature))	-	1875	20%discount to BIS
4.1(Annealing test (for copper))	-	625	20%discount to BIS
4.1(Tensile test (for Al)- After Stranding)	-	625	20%discount to BIS
4.1(Tensile test (for Al)-Before Stranding)	-	625	20%discount to BIS
4.1(Wrapping test (for Al))	-	625	20%discount to BIS
4.2(Conductor resistance test)	-	625	20%discount to BIS
10.11(Per sulphate test (for tinned Cu cable only))	-	1250	20%discount to BIS
9(Overall dimensions)	-	625	20%discount to BIS
5.3(Thickness of Insulation)	-	625	20%discount to BIS
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	625	20%discount to BIS
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	1875	20%discount to BIS
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	1875	20%discount to BIS
Table 1 iii) d) 9)(Cold impact for sheath)	-	1250	20%discount to BIS
Table 1 iii) c) 9)(Cold impact for insulation)	-	625	20%discount to BIS
Table 1 iii) d) 5)(Heat shock-Sheath )	-	625	20%discount to BIS
Table 1 iii) c) 5)(Heat shock-Insulation )	-	625	20%discount to BIS
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	2500	20%discount to BIS
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	2500	20%discount to BIS
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	625	20%discount to BIS
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	625	20%discount to BIS
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	3125	20%discount to BIS
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	3125	20%discount to BIS
Table 1 iii) d) 8)(Cold bend for sheath)	-	1250	20%discount to BIS
Table 1 iii) c) 8)(Cold bend for insulation)	-	625	20%discount to BIS
Table 1 iii) c) 1)(Elongation (Without ageing))	-	625	20%discount to BIS
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	625	20%discount to BIS

06 Jun, 2027

-
Following Additional • Up to and including 400 sq. mm.

14441

BIS, Western Regional Laboratory (WRL)

None

IS 2802 (1964)

Specification for ice-cream

Rs 7670/- excluding Phosphatase test of mix View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 Table 1 (Coliform Count)	-
4.1 Table 1 (Total Colony Count)	-
4.1 Table 1 (Acidity percent, ice cream only)	-
4.1 Table 1 (Milk Fat, ice cream)	-
4.1 Table 1 (Sucrose, all types)	-
4.1 Table 1 (Total Solids)	-
4.1 Table 1 (weight in gram, ice cream)	-
3.1 (Odour and Flavour)	-
3.2 (Texture and Appearance)	-
3.3 (Freedom from Dirt)	-

-
-

14442

BIS, Western Regional Laboratory (WRL)

None

IS 4447 (1994)

Sodium benzoate, food grade - Specification (First Revision)

5,300.00 View breakup
Hence Complete Testing Charges for the product are : (16 x ` 300) + ` 500 = ` 5,300.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.3 Table 1 (Moisture)	-
3.3 Table 1 (Arsenic )	-
3.3 Table 1 (Heavy Metals)	-
3.3 Table 1 (Melting range of benzoic acid)	-
3.3 Table 1 (Purity,expressed as C7H602)	-
3.1 (Description)	-
3.2.1 (Reaction with Ferric Chloride)	-
3.2.2.1 (Test for Sodium - Reaction with uranylzinc acetate)	-
3.2.2.2 (Test for Sodium - Flame test)	-
3.3 Table 1 (Acidity or alkalinity)	-
3.3 Table 1 (Readily carbonizable substancances)	-
3.3 Table 1 (Readily oxidizable substancances)	-
3.3 Table 1 (Chlorinated organic compounds)	-

-
-

14443

BIS, Western Regional Laboratory (WRL)

None

IS 2046 (1995)

Decorative thermosetting synthetic resinbonded laminated sheets specification (Second Revision)

Rs 2550.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Colour and Pattern)	-
5.2 (Surface Finish)	-
5.3 ,Table 5 (Thickness)	-
5.4 (Appearance )	-
5.2.2 (Sports, dirt and similar surface defects)	-
5.4.7,Fig. 2 (Staightness of Edges)	-
5.4.6 (Length and width of a full size Laminate)	-
5.4.6 (Length and width of a full size Laminate)	-
5.4.7,Fig. 2 (Staightness of Edges)	-
5.2.2 (Broken Corners )	-
7.2 a) (Marking)	-
7.2 b) (Marking)	-
7.2 c) (Marking)	-
7.2 d) (Marking)	-
7.2.1 (Marking)	-
5.5, Tables 7, Sr No.(i) Annex C (Resistance to Surface wear)	-
5.5, Tables 7, Sr No.(ii) Annex D (Resistance to immersin in boiling water)	-
5.5, Tables 7, Sr No.(iii) Annex E (Resistance to Dry heat at 180 °C)	-
5.5, Tables 7, Sr No.(iv) Annex F (Dimensional Stability at deviated Temperature)	-
5.5, Tables 7, Sr No.(v) Annex G (Dimensional Stability at 20°C)	-
5.5, Tables 7, Sr No.(vi) Annex G (Resistance to impact by small diameter ball)	-
5.5, Tables 7, Sr No.(vii) Annex J (Resistance to impact by large diameter balls (self supporting compact laminates))	-
5.5, Tables 7, Sr No.(viii) Annex K (Resistance to cracking (thin laminates))	-
5.5, Tables 7, Sr No.(ix) Annex B & E (Resistance to scratching)	-
5.5, Tables 7, Sr No.(i) Annex C (Resistance to Surface wear)	-

-
Test facilities are not available for the following: 1 Resistance to colour change in xenon arc light, 2) Formability, xiv Resistance to blistering,3) Flexural Modulus, 4) Flexural Strength, 5)Tensile Strength

14444

DELHI TEST HOUSE, Azadhpur

8131406

IS 1660 (2009)

Wrought aluminium utensils - Specification (First Revision)

7500 View breakup
Rs.7500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Classification Heavy/Medium/L:ight)	-	100	NA
4(Material)	-	5400	NA
6.1 & Table 1( i) Name of Utensil )	-	100	NA
6.1 & Table 1(ii) Shape of Utensil)	-	100	NA
6.1 & Table 1( Nominal Size, mm)	-	100	NA
6.1 & Table 1(Inside dia, Φ D mm Not declared )	-	100	NA
6.1 & Table 1(Outside dia Ф NA)	-	100	NA
6.1 & Table 1(Height NA)	-	100	NA
6.1 & Table 1(Capacity, l NA)	-	100	NA
6.1( Minimum sheet thickness for nominal size )	-	100	NA
7.1(HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use )	-	150	NA
7.2(Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil)	-	150	NA
8.1(The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects)	-	200	NA
8.2(The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt)	-	200	NA
8.4.1.2( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.)	-	200	NA
8.4.2(A coating of thickness 25 to 100 microns is generally required)	-	200	NA
8.4.3(Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface)	-	200	NA
8.4.4(The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. )	-	200	NA
8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible)	-	200	NA
9(The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils)	-	200	NA
10(Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. )	-	300	NA

17 Jun, 2027

-
0.0

14445

DELHI TEST HOUSE, Azadhpur

8131406

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	500	For BIS Samples: 1.5 times of BIS testing charges
Cl 10.3(UTM)	-	3000	For BIS Samples: 1.5 times of BIS testing charges
Cl 11.3(Press)	-	500	For BIS Samples: 1.5 times of BIS testing charges
Cl 12(Sudden Load Applied)	-	2800	For BIS Samples: 1.5 times of BIS testing charges
Cl 15(Length, Width & Thickness)	-	500	For BIS Samples: 1.5 times of BIS testing charges
Cl 18(Weight)	-	250	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	1000	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Round Bar: Diameter Maximum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Round Bar: Diameter Minimum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Round Bar: Out of Shape)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Square Bar: Side Width: Maximum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Square Bar: Side Width: Minimum)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Square Bar: Out of Square)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Depth)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Width of Flange)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Flange Out of Square)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Convexity))	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Concavity))	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15(Cl. 15 Channel Section: Camber)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl. 15 (Cl. 15 Channel Section: Sweep)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E550, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E450, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E410, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E350, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E300, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E275, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Clause - 5, 8.1 & 8.2(E250, ALUMINIUM)	-	400	For BIS Samples: 1.5 times of BIS testing charges

17 Jun, 2027

-
Cl 13 (Y Groove Cracking Test)

14446

DELHI TEST HOUSE, Azadhpur

8131406

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

9000 View breakup
Rs.9000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Outer Diameter, Thickness & Mass)	-	1500	NA
Cl 10.1(Manufacturing )	-	500	NA
Cl 10.1.1(Manufacturing )	-	500	NA
Cl 12(Workmanship)	-	500	NA
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	3500	NA
Cl 15(Workmanship)	-	500	NA

17 Jun, 2027

-
0.0

14447

DELHI TEST HOUSE, Azadhpur

8131406

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

9500 View breakup
Rs.9500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	400	NA
6.1(Manganese %)	-	400	NA
6.1(Sulphur %)	-	400	NA
6.1(Phosphorus %)	-	400	NA
6.1(V)	-	400	NA
6.1( Nb)	-	400	NA
6.1( Copper %)	-	400	NA
6.1( Nitrogen%)	-	1000	NA
6.1(Silicon %)	-	400	NA
6.1( Aluminium %)	-	400	NA
6.1( Ti)	-	400	NA
6.1(Cr)	-	400	NA
6.1(Mo)	-	400	NA
6.1(Ni)	-	400	NA
Cl 8(UTM)	-	2000	NA
Cl 9(Press)	-	500	NA
Cl 10(Die Press)	-	1000	NA
Cl 12(Workmanship)	-	300	NA
Cl 13(Length, Width & Thickness)	-	400	NA

17 Jun, 2027

-
0.0

14448

DELHI TEST HOUSE, Azadhpur

8131406

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

7000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.7000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Freedom from Defects)	-	200	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	600	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	800	For BIS Samples: 1.5 times of BIS testing charges
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	600	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	200	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	400	For BIS Samples: 1.5 times of BIS testing charges

17 Jun, 2027

-
0.0

14449

DELHI TEST HOUSE, Azadhpur

8131406

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

5250 View breakup
Rs.5250.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	250	NA
6.1(Manganese %)	-	250	NA
6.1(Sulphur %)	-	250	NA
6.1(Phosphorus %)	-	250	NA
6.1( Nitrogen%)	-	1000	NA
6.1(Silicon %)	-	250	NA
6.1( Aluminium %)	-	250	NA
6.1(V)	-	250	NA
6.1( Ti)	-	250	NA
6.1( Copper %)	-	250	NA
6.1( Nb)	-	250	NA
6.1(Boron)	-	250	NA
Cl 8(Workmanship)	-	500	NA
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	500	NA

17 Jun, 2027

-
0.0

14450

DELHI TEST HOUSE, Azadhpur

8131406

IS 432 : Part 2 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

8887.50 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1.1(Sulphur)	-	500	NA
Clause 3.1.1(Phosphorus)	-	500	NA
Cl 4.1(Workmanship)	-	500	NA
Cl 5 & 6(Diameter)	-	1000	NA
Cl 7(UTM)	-	3000	NA
Cl 8.3(Bending To Both Side At 90°, Then Straight)	-	500	NA

17 Jun, 2027

-
0.0

14451

DELHI TEST HOUSE, Azadhpur

8131406

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

7000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Workmanship)	-	200	For BIS samples: 1.5 times of BIS testing charges
Cl 6.1(Diameter)	-	200	For BIS samples: 1.5 times of BIS testing charges.
Cl 6.2(Diameter & Ovality)	-	200	For BIS samples: 1.5 times of BIS testing charges.
Cl 6.2(Weight)	-	100	For BIS samples: 1.5 times of BIS testing charges.
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	1800	For BIS samples: 1.5 times of BIS testing charges.
Cl 9.3(Press)	-	400	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1( CARBON)	-	350	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(SULPHUR)	-	350	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(PHOSPHURS)	-	350	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(MANGANESE)	-	350	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(NITROGEN)	-	1000	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(SILICON)	-	350	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1( ALUMINIUM)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(Nickel)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(Chromium)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(Molybdenum)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.1(NIOBIUM)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.2(VANADIUM)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Clause -4, 4.3(TITANIUM)	-	250	For BIS samples: 1.5 times of BIS testing charges.
Cl 5.1(Workmanship)	-	200	For BIS samples: 1.5 times of BIS testing charges.
Cl 6.2(Diameter & Ovality)	-	400	For BIS samples: 1.5 times of BIS testing charges.
Cl 6.2(Weight)	-	100	For BIS samples: 1.5 times of BIS testing charges.
Cl 8(Physical Requirements)	-	1800	For BIS samples: 1.5 times of BIS testing charges.
Cl 9.3(Press)	-	400	For BIS samples: 1.5 times of BIS testing charges.

17 Jun, 2027

-
-

14452

DELHI TEST HOUSE, Azadhpur

8131406

IS 14724 (1999)

Water purifiers with Ultra - Violet disinfection - Specification

19500 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.19500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3(Workmanship)	-	100	For BIS Samples: 1.5 times of BIS testing charges
Cl 5(Power Supply, Maximum Rate of Flow, Electrical Safety, Materials of Construction, Safety Against UV Exposure, Indicating Lights & In-Bullt Protections and Ease of Operation)	-	3000	For BIS Samples: 1.5 times of BIS testing charges
Cl 6(Leakage-Tightness & Verification of Guarantees of Performance)	-	4000	For BIS Samples: 1.5 times of BIS testing charges
6.2.2.1(Test for turbidity (IS 3025 Part 10))	-	1000	For BIS Samples: 1.5 times of BIS testing charges
6.2.2.2(Test for supended particles)	-	500	For BIS Samples: 1.5 times of BIS testing charges
6.2.2.4(Test for adsorption of activated carbon (IS 3025 Part 5))	-	3000	For BIS Samples: 1.5 times of BIS testing charges
6.2.2.3(Test for Microbiology - Annex A)	-	8000	For BIS Samples: 1.5 times of BIS testing charges

17 Jun, 2027

-
0.0

14453

DELHI TEST HOUSE, Azadhpur

8131406

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 6.1, Table-1(Sulphur)	-	250	NA
Clause 6.1, Table-1(Phosphorus)	-	250	NA
6.2(Phosphorus %)	-	250	NA
6.2(Sulphur %)	-	250	NA
6.2( Nitrogen%)	-	1000	NA
7(Dimensions)	-	200	NA
8.1(Mechanical Properties (as per table 5 of IS 1608))	-	700	NA
8.2(Mechanical Properties (as per IS 1717))	-	400	NA
8.3(Mechanical Properties (as per IS 1755))	-	400	NA
8.4(Mechanical Properties (as per IS 10810(Part- 42)))	-	400	NA
9.1(Galvanizing Requirements )	-	500	NA
9.2(Galvanizing Requirements )	-	500	NA
9.3(Galvanizing Requirements )	-	400	NA
11(Freedom from defects)	-	200	NA

17 Jun, 2027

-
-

14454

DELHI TEST HOUSE, Azadhpur

8131406

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	NA
6(Freedom From Defects)	-	200	NA
9.3(Tensile Test-1608:Part 1)	-	900	NA
9.3, Table 3 (Yield Strength, Mpa)	-	800	NA
9.3, Table 3 (Elongation, %)	-	800	NA
11(Surface finish)	-	300	NA
14.1(Thickness,mm)	-	200	NA
14.2( Width, mm)	-	200	NA
14.3(Length, mm)	-	200	NA
14.5(Camber, mm)	-	200	NA
14.4(Flatness, mm)	-	200	NA

17 Jun, 2027

-
-

14455

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

120800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	3000	10% discount for BIS
1.7(Markings and instructions)	-	1000	10% discount for BIS
2.1(Protection from electric shock and energy hazards)	-	5000	10% discount for BIS
2.2(SELV circuits)	-	5500	10% discount for BIS
2.3(TNV circuits)	-	6000	10% discount for BIS
2.4(Limited current circuits)	-	3000	10% discount for BIS
2.5(Limited power sources .)	-	3000	10% discount for BIS
2.6(Provisions for earthing and bonding)	-	3000	10% discount for BIS
2.9(Electrical insulation)	-	800	800/hr , 10% discount for BIS
2.10(Clearances, creepage distances and distances through insulation)	-	4000	10% discount for BIS
3.2(Connection to a mains supply)	-	4000	10% discount for BIS
3.3(Wiring terminals for connection of external conductors)	-	4000	10% discount for BIS
3.5(Interconnection of equipment)	-	4000	10% discount for BIS
4.1(Stability)	-	3000	10% discount for BIS
4.2(Mechanical strength)	-	4000	10% discount for BIS
4.3(Design and construction)	-	5000	10% discount for BIS
4.4(Protection against hazardous moving parts)	-	6000	10% discount for BIS
4.5(Thermal requirements)	-	6000	10% discount for BIS
4.6(Openings in enclosures)	-	3000	10% discount for BIS
4.7(Resistance to fire)	-	6000	10% discount for BIS
5.1(Touch current and protective conductor curren)	-	3000	10% discount for BIS
5.2(Electric strength)	-	5000	10% discount for BIS
5.3(Abnormal operating and fault conditions)	-	8000	for 8 hr, 10% discount for BIS
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	3000	10% discount for BIS
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	3000	10% discount for BIS2000
6.3(Protection of the telecommunication wiring system from overheating)	-	4000	10% discount for BIS
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	4000	10% discount for BIS
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	2000	10% discount for BIS
7.4(Insulation between primary circuits and cable distribution systems)	-	2000	10% discount for BIS
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000	10% discount for BIS
3.1(General)	-	1000	10% discount for BIS
3.4(Disconnection from the mains supply)	-	500	10% discount for BIS

14 Nov, 2027

-
Exclusions: Components (Cl.1.5), Safety Interlocks (Cl.2.8), Semiconductor devices (Cl.2.10.5.4), AC Power Supply Cord (Cl.3.2.5.1), Cathode ray tubes (Cl.4.2.8 ), High pressure lamps (Cl.4.2.9), Ionizing radiation (Cl.4.3.13.2), Effect of ultraviolet UV radiations on materials (Cl.4.3.13.3), Human exposure to ultraviolet radiations (Cl.4.3.13.4), Lasers (including LEDs) (Cl.4.3.13.5), Insulating winding wires (Annex-U), Evaluation of IC current limiters (Annex CC)

14456

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

65000 View breakup
Rs. 65000/- for Electronic Games (Video),Optical Disk Players with built in Amplifiers input power 200W,Amplifier with input power 2000W, Electronic musical systems with input power 200W,Power adaptor FOR audio, video & similar electric apparatus, Plasma/LCD/LED TVs of screen size up to 80 Inch. (10% discount for BIS). ADDITIONAL PRODUCTS INCLUDED W.E.F. 29-09-2020: Rs.30000/- for Wireless headphone & earphone, electronic Musical system with input power below 200W, Television other than plasma/LCD/LED/TVs (10% DISCOUNT TO BIS]. ADDITIONAL PRODUCTS FOR PHASE V INCLUDED W.E.F. 20-11-2020: Rs. 30,000/- for Wireless Microphone, Webcam (Finished Products), Smart Speaker (With and without display), Bluetooth Speakers, Video Camera

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	1000	10% Discount for BIS
7(Heating under normal operating conditions)	-	10000	10% Discount for BIS
8(Constructional requirements with regard to the protection against electric shock)	-	3000	10% Discount for BIS
9(Electric shock hazard under normal operating conditions)	-	3000	10% Discount for BIS
10(Insulation requirements)	-	4000	10% Discount for BIS
11(Fault conditions)	-	5000	10% Discount for BIS
12(Mechanical strength)	-	5000	10% Discount for BIS
13(CLEARANCES and CREEPAGE DISTANCES)	-	8000	10% Discount for BIS
15(TERMINALS)	-	5000	10% Discount for BIS
16(External flexible cords)	-	3000	10% Discount for BIS
17(Electrical connections and mechanical fixings)	-	10000	10% Discount for BIS
19(Stability and mechanical hazards)	-	3000	10% Discount for BIS
20(Resistance to fire)	-	5000	10% Discount for BIS

14 Nov, 2027

-
Only for IP(0-4)(5-6) Excluding: Cl. 6 Hazardous Radiation, Cl. 8.17 Endurance test for wound components with insulated winding wires without additional interleaved insulation, Cl.8.21 Non-separable thin sheet material , Cl. 13.5 Printed Boards Cl. 14 Component Cl.15.1 Plugs & Sockets Cl.16.3 External flexible Cords, Cl. 18 Mechanical strength of Picture tubes and protection against the effect of implosion

14457

Research & Development Centre for Bicycle and Sewing Machine, Ludhiana

9100634

IS 15449 : Part 1 (2004)

Household zig - Zag sewing machine head: Part 1 general requirements

10000 View breakup
Rs.10000/- + GST

Clause No.	Exclusion	Remark
3.8(Stitch Width Selector)	-	+ GST@18%
6.2(Painting)	-	--
8.1(Accuracy Requirements)	-	--
8.2(Sewing Requirements)	-	--
8.3(Durability Requirements)	-	--

-
Rs.10000/- is testing charge for entire IS 15449 (Pt-1 to Pt-4)

14458

Research & Development Centre for Bicycle and Sewing Machine, Ludhiana

9100634

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

15000 View breakup
Rs.14700/- + GST

Clause No.	Exclusion	Remark
Cl 8(Diameter, Ovality & Weight)	-	--
Cl 9(UTM & HBW)	-	--
Cl 12(Supplementary Requirements)	-	--

-
0.0

14459

DELHI TEST HOUSE, Azadhpur

8131406

IS 7809 : Part 3 : Sec 1 (1986)

Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision)

19400 View breakup
Rs.19400.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	100	NA
2.1.1(Type and Desiganation)	-	100	NA
2.1.2(Type and Desiganation)	-	100	NA
3.1(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	100	NA
3.2(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	300	NA
3.3(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	300	NA
3.4(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	300	NA
4.1(Performance Requirments)	-	700	NA
4.2(Performance Requirments)	-	700	NA
4.3(Performance Requirments)	-	700	NA
4.4(Performance Requirments)	-	1800	NA
4.5(Performance Requirments)	-	1700	NA
4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977)	-	500	NA
4.7(Electrolytic corrosion)	-	1500	NA
4.8(Stability to accelerated ageing )	-	1000	NA
4.9(Insulation resistance test)	-	500	NA
3.1( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975)	-	9100	NA

17 Jun, 2027

-
Up to 0.22mm thickness only

14460

Research & Development Centre for Bicycle and Sewing Machine, Ludhiana

9100634

IS 12109 (1987)

General requirements for light duty sewing machine heads for industrial use

10000 View breakup
-

Clause No.	Exclusion	Remark
6.1(Accuracy Requirement)	-	+ GST@18%
6.2 Table 1(Accuracy Requirement Needle Bar - Measuring Condition - Needle bar at lowermost position)	-	--
6.2 Table 1(Accuracy Requirement Thread takeup lever - Measuring Condition - Thread take up lever at top and intermediate position of motion)	-	--
6.2 Table 1(Accuracy Requirement Rotating hook- Measuring Condition - With bobbin-case removed, play of rotating hook bobbin case holder )	-	--
6.2 Table 1(Accuracy Requirement Feed machanlsm- Measuring Condition - Feed dog at the highest position above the needle plate )	-	--
8 Table 2(Sewing Requirement)	-	--

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number