BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15123 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

15031

BIS, Patna Branch Laboratory (PBL)

None

IS 1038 (1983)

Specification For Steel Doors, Windows And Ventilators

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1. (Size-Height)	-
4.1 (Size-Width)	-
4.3 (Designation)	-
6.1 (Frames)	-
6.1.1.1 (Visual Inspection Test)	-
6.2 (Side Hung Shutter)	-
6.2 (Side Hung Shutter)	-
6.2 (Side Hung Shutter- Thickness of hinge)	-
6.2 (Side Hung Shutter- Pin diameter)	-
6.2 (Side Hung Shutter-Width of hinge)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate- Thicknesss of handle)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate-Height of handle plate)	-
6.2.3 (Peg Stay - Thickness)	-
6.2.3 (Peg Stay - Dimensions-A)	-
6.2.3 (Peg Stay - Dimensions-B)	-
6.2.3 (Peg Stay - Dimensions-C)	-
6.2.3 (Peg Stay - Dimensions-D)	-
6.2.3 (Peg Stay - Dimensions-E)	-
6.2.3 (Peg Stay - Dimensions-F)	-
6.2.3 (Peg Stay - Dimensions-G)	-
6.2.3 (Peg Stay - Dimensions-H)	-
6.2.3 (Peg Stay - Dimensions-J)	-
6.2.3 (Peg Stay - Dimensions-K)	-
6.2.3 (Peg Stay - Dimensions-L)	-
6.2.3 (Peg Stay - Dimensions-M)	-
6.3 (Top Hung Ventilator)	-
6.3 (Top Hung Ventilator-Thickness of hinge)	-
6.3 (Top Hung Ventilator-Pin diameter)	-
6.3 (Top Hung Ventilator-Width of hinge)	-
7.1 (Position of Holes)	-
7.2 Table 2 (Position of Fixing Screws)	-
7.2 Table 2 (Lugs-A)	-
7.2 Table 2 (Lugs-B)	-
7.2 Table 2 (Lugs-C)	-
7.2 Table 2 (Lugs-D)	-
7.2 Table 2 (Lugs-E)	-
7.2 Table 2 (Lugs-F)	-
7.2 Table 2 (Lugs-G)	-
8 (Finish)	-
9 (Glazing)	-
9 (Glazing- No of glazing clip against each plate)	-

-
All test facilities are available as per the IS

15032

BIS, Southern Regional Laboratory (SRL)

None

IS 13422 (1992)

Disposable surgical rubber gloves specification

Rs.6900.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.4 (Sterility)	-
4 (TYPES)	-
5.2.1 (General Characteristics and Dimensions)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Length)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Width)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Finger)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Palm)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Cuff)	-
5.3 and Table 2 ( Tensile Strength Before Ageing)	-
5.3 and Table 2 ( Elongation at Break Before Ageing)	-
5.3 and Table 2 (Stress at 500% Elongation at Break Before Ageing)	-
5.3 and Table 2 ( Tensile StrengthAfter Accelerated Ageing)	-
5.3 and Table 2 ( Elongation at Break After Accelerated Ageing)	-
5.5 (Airtight Test)	-

-
" Mech - 25 pairs, Micro - 3 pairs "

15033

BIS, Northern Regional Laboratory (NRL)

None

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

Please check remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.2.5 (Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-
9.2.5 (Modulus of elasticity - AVERAGE - Annexure K)	-
9.2.5 (Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-
9.2.5 (Modulus of rupture - AVERAGE - Annexure K)	-
9.2.4 (Mycological Test [for MR grade only] - Annexure J)	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-
9.2.1 (Dimensional Changes caused by humidity - Delamination - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-
7.3 (Dimensional Requirements - Variation in thickness - Annexure E)	-
7.3 (Dimensional Requirements - Squareness - Annexure D)	-
7.3 (Dimensional Requirements - Edge Straightness - Annexure D)	-
7.3 (Dimensional Requirements - Thickness - Annexure E)	-
7.3 (Dimensional Requirements - Width - 8.1.4)	-
7.3 (Dimensional Requirements - Length - 8.1.4)	-
8.1.3, 6.3.3, IS 1328 (Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-
8.1.3, 6.3.3, IS 303 (Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-
9.2.6 (Spot test - Annexure L)	-
8.1.3, 6.3.3, IS 1328 (Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-
8.1.3, 6.3.3, IS 303 (Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-
9.2.6 (Spot test - Annexure L)	-
9.2.3 (Adhesion of Plies - Annexure H)	-
9.2.1 (Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-
9.2.6 (Spot test - Annexure L)	-
9.2.6 (mechanical) (Spot test - Annexure L)	-

-
Test facility is complete

15034

BIS, Southern Regional Laboratory (SRL)

None

IS 13334 : Part 2 (2014)

Skimmed milk powder - Specification: Part 2 extra grade (First Revision)

EXTRA GRADE

10430/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 (ix) (Bacterial count (IS 5402))	-
Table 1 (x) (Coliform count (IS 5401 - Part 1))	-
Table 1 (xi) (Escherichia coli (IS 5887 - Part 1))	-
Table 1 (xii) (Coagulase positive Staphylococcus aureus (IS 5887 - Part 2))	-
Table 1 (xiii) (Salmonella (IS 5887 - Part 3))	-
Table 1 (xiv)(a) (Spore Count: a)Aerobic (Bacillus cereus) Type m (IS 5887 - Part 6))	-
Table 1 (xiv)(b) (Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003))	-
Table 1 (xiv)(b) (Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type M (ISO 15213 : 2003))	-
Table 1 (xv) (Listeria monocytogenes (IS 14988 - Part 2 : 2001))	-
Table 1 (i) (Moisture (IS 116231or 16072))	-
Table 1 (ii) (Milk protein in milk solids not fat (IS 72192))	-
Table 1 (iii) (Milk fat (IS 117213) or Annex B)	-
Table 1 (iv) (Insolubility index (IS 12759))	-
Table 1 (v) (Total ash (on dry basis), Annex B of IS 14433)	-
Table 1 (vi) (Titratable acidity (IS 11766))	-
Table 1 (viii) (Scorched particles (equivalent to Disc B) (IS 13500))	-

-
2X500g Excluding Except Lactate Content

15035

BIS, Eastern Regional Laboratory (ERL)

None

IS 398 : Part 5 (1992)

Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision)

All sizes/varieties

11400 View breakup
Excluding Breaking load on complete conductor, Surface condition test, Corona test and Radio interference test

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (elec) (Freedom from defects)	-
13.5.1 Table 3 (elec) (Breaking Load on Complete conductor)	-
13.5.2 Table 1 (elec) (Breaking Load of Aluminium Wires Before Stranding)	-
13.5.2 Table 2 (elec) (Breaking Load of Steel Wires Before Stranding)	-
13.5.2 Table 1 (elec) (Breaking Load of Aluminium Wires After Stranding)	-
13.5.2 Table 2 (elec) (Breaking Load of Steel Wires After Stranding)	-
13.6.1 (elec) (Ductility by Torsion Test before stranding)	-
13.6.1 (elec) (Ductility by Torsion Test after stranding)	-
13.6.2 (elec) (Ductility by Elongation Test before stranding)	-
13.6.2 (elec) (Ductility by Elongation Test after stranding)	-
13.7.1 (elec) (Wrapping Test Aluminium Wires Before Stranding)	-
13.7.1 (elec) (Wrapping Test Aluminium Wires After Stranding)	-
13.7.2 (elec) (Wrapping Test Galvanized Steel Wires Before Stranding)	-
13.7.2 (elec) (Wrapping Test Galvanized Steel Wires After Stranding)	-
13.8 (elec) (Resistance test-Aluminium wire before Stranding)	-
14.8 (elec) (Resistance test-Aluminium wire after stranding)	-
13.9.2 (elec) (Mass of Zinc coating)	-
10.4 (elec) (Direction of lay)	-
13.4 Table-4 (elec) (Lay Ratio- Aluminium Wire Outermost Layer)	-
13.4 Table-4 (elec) (Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-
13.4 Table-4 (mech) (Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-
13.4 Table-4 (elec) (Lay Ratio- Steel Core (6 Wire Layer))	-
13.3 Table-2 (elec) (Diameter-Galvanized Steel wires)	-
13.3 Table-1 (elec) (Diameter-Aluminium wires)	-
13.10 (elec) (Surface condition test)	-
13.11 (elec) (Corona Test)	-
13.12 (elec) (Radio Interference Voltage Test)	-
13.4 Table-4 (elec) (Lay Ratio- Steel Core (6 Wire Layer))	-
8.2.2 (elec) (Resistance of complete conductor)	-
13.2 (elec) (Visual Examination)	-
13.4 Table-4 (elec) (Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-

-
Elec-Facility not available for surface condition,corona test ,radio interference test, Breaking Load on complete conductor.

15036

BIS, Northern Regional Laboratory (NRL)

None

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 18 (Weight)	-
Cl 15 (Length, Width & Thickness)	-
Cl 11.3 (Press)	-
Cl 10.3 (UTM)	-
Cl 7 (Workmanship)	-
Cl 7 (Workmanship)	-
Cl 7 (Workmanship)	-
Clause - 5, 8.1 & 8.2 (E250, CARBON)	-
Clause - 5, 8.1 & 8.2 (E250, SULPHUR)	-
Clause - 5, 8.1 & 8.2 (E250, SILICON)	-
Clause - 5, 8.1 & 8.2 (E250 ,MANGANESE)	-
Clause - 5, 8.1 & 8.2 (E250, PHOSPHURS)	-
Clause - 5, 8.1 & 8.2 (E250, NITROGEN)	-
Clause - 5, 8.1 & 8.2 (E250, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E275, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E300, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E350, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E410, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E450, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E550, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E600, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E250, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E410, NITROGEN)	-
Clause - 5, 8.1 & 8.2 (E410, SILICON)	-
Clause - 5, 8.1 & 8.2 (E450 ,MANGANESE)	-
Clause - 5, 8.1 & 8.2 (E410, PHOSPHURS)	-
Clause - 5, 8.1 & 8.2 (E410, SULPHUR)	-
Clause - 5, 8.1 & 8.2 (E410, CARBON)	-
Clause - 5, 8.1 & 8.2 (E410, CARBON +EQUIVELENT )	-
Cl. 15 (Cl. 15 Square Bar: Out of Square)	-
Cl. 15 (Cl. 15 Square Bar: Side Width: Minimum)	-
Cl. 15 (Cl. 15 Square Bar: Side Width: Maximum)	-
Cl. 15, 16 (Thickness )	-
Cl. 15, 16 (Toe Radius R2)	-
15 (Radius R1)	-
Cl. 15, 16 (Leg Length Difference (Angle))	-
Cl. 15, 16 (Leg Length B (Angle))	-
Cl. 15, 16 (Leg Length A (Angle))	-
Cl. 15, 16 (Camber (Angle))	-
Cl 13 (Y Groove Cracking Test)	-
Clause 12 (Impact Test)	-
Cl. 15, 16 (Flange Slope)	-
Cl. 15, 16 (Web Thickness)	-
Cl. 15, 16 (Flange Thickness)	-
Cl. 15, 16 (Out of Square (Flat))	-
Cl. 15, 16 (Width )	-
Cl. 15, 16 (Thickness )	-
10 (Tensile Strength-IS:1608(P1)-22)	-
10 (Yield Stress-IS:1608(P1)-22)	-
10 (Elongation on SoA 5.65mm GL)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650) (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
-

15037

BIS, Eastern Regional Laboratory (ERL)

None

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

Complete facility available upto 100 sq mm only

Please see remarks View breakup
For stranded conductors with 7 strands- Rs.1500 For stranded conductors with 19 strands- Rs.3600 For stranded conductors with 37 strands- Rs. 6750 For stranded conductors with 61 strands- Rs. 10650

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Freedom from Defects)	-
7.2.2 Table-2, Table-4 (Calculated resistance of Stranded Conductor)	-
8.1 (Joints in wires-Conductors Containing Seven Wires)	-
8.2 (Joints in wires-Conductors Containing More Than Seven Wires)	-
9.2 Table 3 (Lay Ratio of stranded conductors)	-
9.3 (Direction of Lay)	-
9.4 (Multiple layers of wires)	-
12.2 Table 1 (Breaking Load Test- Before Stranding)	-
12.2 Table 1 (Breaking Load Test- After Stranding)	-
12.3 Table 1 (Elongation Test- Before Stranding)	-
12.3 Table 1 (Elongation Test- After Stranding)	-
12.4 Table 1 (Resistance of Aluminium wire)	-
11 (Packing and Marking)	-
7.1 Table-1 (Dimensional measurement of wires)	-
9.1 (Stranding)	-

-
Elec-Complete facility available upto 100 sq mm only. For Above 100 sq.mm. facility not available for Stress-Strain Test, Surface Condition, Ultimate B/L on stranded conductor.

15038

BIS, Central Laboratory (CL)

None

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Conductor - Material)	-
4.1 (Tensile test (for Al)-Before Stranding)	-
4.1 (Tensile test (for Al)- After Stranding)	-
4.1 (Annealing test (for copper))	-
4.1 (Wrapping test (for Al))	-
4.2 (Conductor resistance test)	-
5.1 (Insulation)	-
5.2 (Application )	-
5.3 (Thickness of Insulation)	-
6.1 (Filler)	-
6.2 (Filler)	-
7 (Binder Tape)	-
8.1 (Sheath Material )	-
8.3 (Thickness of Sheath)	-
9 (Overall dimensions)	-
9.1 (Ovality)	-
10.1 (HV (water immersion))	-
10.2 (HV (room temperature))	-
10.4 (Flammability test-Burning after flame removal)	-
10.4 (Flammability test- Unaffected portion)	-
10.9 (Additional ageing test (OU cables only) -HV test (at 60±3oC))	-
10.11 (Per sulphate test (for tinned Cu cable only))	-
11 (Identification)	-
11.1 (Durability)	-
11.2 (Legibility)	-
12 (CONSTRUCTION Core Identification)	-
Table 1 iii) c) 1) (Tensile strength (Without ageing))	-
Table 1 iii) c) 1) (Elongation (Without ageing))	-
Table 1 iii) c) 2) (Loss of mass- Insulation )	-
Table 1 iii) c) 3) (Tensile strength (After ageing))	-
Table 1 iii) c) 3) (TS variation)	-
Table 1 iii) c) 3) (Elongation (After ageing))	-
Table 1 iii) c) 3) (Elongation variation)	-
Table 1 iii) c) 4) (Shrinkage-Insulation)	-
Table 1 iii) c) 4) (Cracks Observed)	-
Table 1 iii) c) 5) (Heat shock-Insulation )	-
Table 1 iii) c) 6) (Hot deformation - Indentation depth- Insulation)	-
Table 1 iii) c) 7) (Thermal stability- Insulation )	-
Table 1 iii) c) 8) (Cold bend for insulation)	-
Table 1 iii) c) 9) (Cold impact for insulation)	-
Table 1 iii) d) 1) (Sheath -Tensile strength (Without ageing))	-
Table 1 iii) d) 1) (Sheath- Elongation (Without ageing))	-
Table 1 iii) d) 2) (Loss of mass- Sheath )	-
Table 1 iii) d) 3) (Sheath- Tensile strength (After ageing))	-
Table 1 iii) d) 3) (Sheath- TS variation)	-
Table 1 iii) d) 3) (Sheath- Elongation (After ageing))	-
Table 1 iii) d) 3) (Sheath- Elongation variation)	-
Table 1 iii) d) 4) (Shrinkage- Sheath )	-
Table 1 iii) d) 4) (Cracks Observed)	-
Table 1 iii) d) 5) (Heat shock-Sheath )	-
Table 1 iii) d) 6) (Hot deformation -Indentation depth - Sheath )	-
Table 1 iii) d) 7) (Thermal stability- Sheath )	-
Table 1 iii) d) 8) (Cold bend for sheath)	-
Table 1 iii) d) 9) (Cold impact for sheath)	-
table 1 e) 3) (Volume Resistivity - Room temp )	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-
table 1 e) 3) (IR constant- Room temp )	-
table 1 e) 3) (IR constant- max. Temp)	-
Table 1 iii) c) 8) (Cold bend for insulation)	-
Table 1 iii) c) 9) (Cold impact for insulation)	-
Table 1 iii) d) 8) (Cold bend for sheath)	-
Table 1 iii) d) 9) (Cold impact for sheath)	-
Table 1 (Category Code)	-
10.11 (Persulphate Test )	-
4.1 (Conductor - Material)	-
4.1 (Conductor - Material)	-
4.1 (Conductor - Material)	-
8 (SHEATH)	-
18 (SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-
4.1 (Material)	-
(4.3 of IS 8130:2013) (Form of Conductor)	-
( 4.4.1 of IS 8130:2013) (Joints in Conductor)	-
(4.4.2 of IS 8130:2013) (Joints in Conductor Solid Conductors (Aluminium Conductors only))	-
(Cl.6.1.1 of IS 8130:2013) (Solid Conductor (Class 1))	-
(Cl.6.1.2 of IS 8130:2013) (Solid Conductor (Class 1))	-
(Cl.6.1.3 of IS 8130:2013) (Solid Conductor (Class 1))	-
(6.2.1 of IS 8130:2013) (Stranded Circular Non-compacted Conductors (Class 2))	-
(6.2.2 of IS 8130:2013) (Stranded Circular Non-compacted Conductors (Class 2))	-
(6.2.3 of IS 8130:2013) (Stranded Circular Non-compacted Conductors (Class 2))	-
(6.3.1 of IS 8130:2013) (Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-
(6.3.2 of IS 8130:2013) (Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-
(6.3.3 of IS 8130:2013) (Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-
( 6.4.1 of IS 8130:2013) (Flexible Conductors (Class 5))	-
(6.4.2 of IS 8130:2013) (Flexible Conductors (Class 5))	-
( 6.4.3 of IS 8130:2013) (Flexible Conductors (Class 5))	-
Cl.19.1.4 (Assembly of Cores)	-
Cl. 8.2 (Application of Sheath)	-

-
Test facility not available for FR, FR-LSH category.

15039

BIS, Central Laboratory (CL)

None

IS 15658 (2006)

Precast concrete blocks for paving - Specification

Rs.15940/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.2.4 (WATER ABSORPTION TEST (Average for three test specimens))	-
6.2.5 (AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-

-
Excluding -; Abrasion Resistance Test a ( Dry & Wet)

15040

BIS, Central Laboratory (CL)

None

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 Table-2 viii (Alkali content)	-
6.1 Table-2 vii (Chloride content)	-
6.1 Table-2 vi (Loss on ignition)	-
6.1 Table-2 v (Total Sulphur Content calculated as Sulphuric Anhydride)	-
6.1 Table-2 iv (Magnesia)	-
6 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
6.1 Table-2 iii. (Insoluble residue)	-
6.1 Table-2 ii. (Ratio of percentage of alumina to that of iron oxide)	-
6.1 Table-2 viii (Alkali content)	-
6.1 Table-2 vii (Chloride content)	-
6.1 Table-2 vi (Loss on ignition)	-
6.1 Table-2 v (Total Sulphur Content calculated as Sulphuric Anhydride)	-
6.1 Table-2 iv (Magnesia)	-
6 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
6.1 Table-2 iii. (Insoluble residue)	-
6.1 Table-2 ii. (Ratio of percentage of alumina to that of iron oxide)	-
7 Table-3 iv c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 Table-3 iv b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 Table-3 iv a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 Table-3 iii b (Setting Time Final)	-
7 Table-3 iii a (Setting Time Initial)	-
7 Table-3 ii b (Expansion by Autoclave)	-
7 Table-3 ii a (Expansion by Le Chatelier)	-
7 Table-3 i. (Fineness)	-

-
Excluding Table 2,Clause 6.1 ,sl. no.(viii) , alkali content;

15041

BIS, Northern Regional Laboratory (NRL)

None

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 Table-3 i. (Fineness)	-
7 Table-3 i. (Fineness)	-
7 Table-3 ii a (Expansion by Le Chatelier)	-
7 Table-3 ii b (Expansion by Autoclave)	-
7 Table-3 iii a (Setting Time Initial)	-
7 Table-3 iii b (Setting Time Final)	-
7 Table-3 iv a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 Table-3 iv b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 Table-3 iv c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
6.1 Table-2 vi (Loss on ignition)	-
6.1 Table-2 viii (Alkali content)	-
6.1 Table-2 vii (Chloride content)	-
6.1 Table-2 v (Total Sulphur Content calculated as Sulphuric Anhydride)	-
6.1 Table-2 iv (Magnesia)	-
6.1 Table-2 iii. (Insoluble residue)	-
6.1 Table-2 ii. (Ratio of percentage of alumina to that of iron oxide)	-
6 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-

-
Test Facility is complete for Chemical. Test Facility is complete except Transverse Strength Test

15042

BIS, Southern Regional Laboratory (SRL)

None

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

Rs.6450.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.6 (Vicat Softening Temperature IS 12235 (Part 2).)	-
9.3 (Density IS 12235 (Part 14))	-
9.1 ( Visual Appearance)	-
7.2 and Table 5, 6 & 7 Fig 1B (Wall thickness, Min)	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B (Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B (Outer Diameter at any point )	-
7.2 and Table 5, 6 & 7 Fig 1B (Mean Outer Diameter of Pipe, Min)	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B (Mean Outer Diameter of Pipe)	-
7.2 and Table 5, 6 & 7 Fig 1B (Mean Outer Diameter of Pipe , Max)	-
7.1, 7.2 and Table 5, 6 & 7 Fig 1B (Outer Diameter at any point , Min)	-
8.4 (Sealing rings - Hardness)	-
9.1 ( Visual Appearance)	-
5 (COLOUR)	-
8.4.1 and Table 13 Fig 3B & 4B (Dimensions of sealing elements)	-
7.4 Table 8 & 9 Fig 1 (Effective length, l2)	-
7.4 Table 8 & 9 Fig 1 (Segmental length, l3)	-
7.4 Table 8 & 9 Fig 1 (Segmental length,mm for socket (average of 4.0))	-
7.4 Table 8 & 9 Fig 1 (Segmental length for Spigot (average of 4.0))	-
7.3.1 (No.of Ribs)	-
7.3.2 (Rib height)	-

-
" 6 mts, 2 Gaskets and 5 Hardness button Excluding Excl. Tensile test, reistance to external blows at 0°C , Effect on Water, thread gauges

15043

BIS, Central Laboratory (CL)

None

IS 710 (2010)

Marine plywood - Specification (Second Revision)

Rs 11200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (WORKMANSHIP AND FINISH )	-
7.2 (WORKMANSHIP AND FINISH )	-
7.3 (WORKMANSHIP AND FINISH )	-
7.5 (WORKMANSHIP AND FINISH )	-
6.1 (DIMENSIONS)	-
6.2 (DIMENSIONS)	-
6.3 (DIMENSIONS)	-
9.1.1 (MOISTURE CONTENT)	-
9.1.2 , 9.1.2.1 (Glue Adhesion in Dry State)	-
9.1.2 , 9.1.2.2 (Glue Adhesion in Dry State)	-
9.1.3 , 9.1.3.1.1 (Water resistance test)	-
9.1.3 , 9.1.3.1.2 (Water resistance test)	-
9.1.5 (Mycological test)	-
9.1.4 (Tensile strength)	-
9.1.6 (Table 3) (Static bending strength)	-
9.1.6 (Table 3) (Static bending strength)	-
9.1.7 (Table 4) (Wet bending strength)	-
9.1.7 (Table 4) (Wet bending strength)	-
9.1.8 (Retention of preservative)	-
11.1 (MARKING)	-

-
-

15044

BIS, Central Laboratory (CL)

None

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

- View breakup
Testing charges excluding the material test are :Rs.7800.00 Testing charges for the material tests are :Rs.3600.0

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.3 (Tensile Test)	-
7.3 (Elongation at Break)	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-

-
Excluding Environmental strees cracking resistance test and Cl 7.1 & Table 2 Hydraulic test;

15045

BIS, Central Laboratory (CL)

None

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

- View breakup
Rs. 4250/-(Excluding leakage test and Hyd. Proof Test)+Testing charges as per IS 14151(Part 1)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.2.1 (Visual and Workmanship Requirement)	-
4.2.7 (1 Dimensions of Quick Coupled Pipes and Fittings)	-

-
-

15046

BIS, Central Laboratory (CL)

None

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985)	-
6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985)	-
6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-
6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985)	-
6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-
7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10)	-
7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 -Table 2-iii- b (Setting Time Final- 4031 Part 5)	-
7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-
7 -Table 2- i (Fineness 4031 Part 2)	-

-
Excluding Table 1,Clause 6 ,sl. no.(vi) , alkali content;

15047

BIS, Central Laboratory (CL)

None

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1 (Colour)	-
10.1 (Surface Finish)	-
7.2.1.1 Table3 (Angle of taper (Note-1))	-
5 (CLASSIFICATION OF PIPES)	-
7.1.1.1 (DIMENSIONS-PIPE-Mean O.D. (Minimum))	-
7.1.1.1 (DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-
7.1.1.1 (DIMENSIONS-PIPE-Mean O.D. Variation)	-
7.1.1.2 (DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-
7.1.1.2 (DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-
7.1.1.2 (DIMENSIONS-PIPE-Ovality (Maximum))	-
7.1.2.1 (DIMENSIONS-PIPE-Thickness(Minimum))	-
7.1.2.1 (DIMENSIONS-PIPE-Thickness(Maximum))	-
7.1.2.1 (DIMENSIONS-PIPE-Average Thickness)	-
Cl- 7.2 (Socket length (Take 4 reading & minimum will be reported))	-
7.2.1 (DIMENSIONS-Socket)	-
7.2.1.1-Table 3 (DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-
7.2.1.1-Table 3 (DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-
7.2.1.2(a)-Table 5 (DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-
10.7 (Sulphated Ash Content)	-
7.2.1.2-Table 4 (DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-
8 (SEALING RINGS)	-
9.1 (PIPE ENDS)	-
10.1 (PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-
10.1.1 (PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-
10.2 (PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-
10.4 (PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-
10.5 (PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-
10.6 (PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-
11.1-Table 6 (MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-
11.1-Table 6 (MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-
11.2 (Resistance to External Blows at 0°C)	-
13.1 (Marking)	-
cL-13.1.1 (Marking)	-
Cl-13.1.2 (Marking)	-

-
Excluding Effect on water

15048

BIS, Central Laboratory (CL)

None

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 8.3 (Carbon Black Content)	-
Cl-7.4 (Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-
8.2 (Longitudinal Reversion Test)	-
Cl 8.3 (Carbon Black Dispersion)	-
8.7 (Density)	-
8.4 ( Melt Flow Rate)	-
7.4.1.2 (Ovality)	-
7.2 (Length)	-
6.2 (Colour)	-
6.2.1 (6.1.1 Identification Stripes)	-

-
Excluding Oxidation induction , overall migration, Cl 8.7 density, Cl 7.4.1.2 ovality Cl 8.8 Tensile,Cl 8.9 Elongation at Break;

15049

BIS, Central Laboratory (CL)

None

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (GRADE)	-
4 (Grade, Type and Construction)	-
7.3.2 (CONSTRUCTION-Stiles and Rails)	-
11.1 (Dimensions - Height)	-
11.1 (Dimensions - Width)	-
11.1 (Dimensions - Thickness)	-
11.1 (Dimensions - Variation in thickness)	-
11.12 (End immersion test)	-
11.1 (Dimensions - Squareness)	-
9.1 (Workmanship & Finish)	-
9.2 (Workmanship & Finish)	-
9.3 (Workmanship & Finish)	-
11.2 (General Flatness Test)	-
11.3 (Local Planeness Test)	-
Clause 11.4 (Impact Indentation Test)	-
11.5 (Flexure Test)	-
11.6 (Edge Loading Test)	-
11.7.1 (Shock Resistance Test)	-
11.7.2 (Shock Resistance Test)	-
Clause 11.8 (Buckling Resistance Test)	-
Clause 11.9 (Slamming Test)	-
Clause 11.10 (Misuse Test)	-
Clause 11.11 (Varying Humidity Test)	-
11.13 (Knife Test)	-
Clause 11.14 (Glue Adhesion Test)	-
Clause 11.15 (Screw Withdrawal Resistance Test)	-
7.3.3 (CONSTRUCTION-Stiles and Rails)	-

-
Excluding Test facility not available for Cl 11.2, 11.4, 11.6, 11.8, 11.9;

15050

BIS, Patna Branch Laboratory (PBL)

None

IS 6003 (2010)

Indented Wire For--Prestressed Concrete ”

Rs.4110/- excl. relaxation test View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Diameter)	-
Cl 6.1.2 (Weight)	-
Cl 7.1 (Tensile Test On UTM)	-
Cl 7.2 (Tensile Test On UTM)	-
Cl 7.3 (Reverse Bend Test)	-
Cl 7.4 (Tensile Test On UTM)	-
Cl 7.5 (Load )	-
4.1.1 (Phosphorus %)	-
4.1.1 (Sulphur %)	-

-
All test facilities are available as per the IS except- i. Ductility Test (Clause 7.3) ii. Reverse Bend Test (Clause 8.5)

15051

BIS, Patna Branch Laboratory (PBL)

None

IS 7224 (2006)

Iodized salt, vacuum evaporated iodized salt and refined iodized salt - Specification (Second Revision)

Rs7440/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.2 (Particle Size)	-
Clause 4.3 Table 1 (Moisture content)	-
Clause 4.3 Table 1 (water insoluble matter)	-
Clause 4.3 Table 1 (Chloride Content(as Nacl))	-
Clause 4.3 Table 1 (Matter soluble in water other than sodium chloride)	-
Clause 4.3 Table 1 (Calcium (as Ca))	-
Clause 4.3 Table 1 (Magnesium (as mg))	-
Clause 4.3 Table 1 (Sulphate (as SO4 ),)	-
Clause 4.3 Table 1 (Iodine content, a) Manufacturers Level )	-
Clause 4.3 Table 1 (Alkalinity (as Na2CO3),)	-
Clause 4.3 Table 1 (Iron(as Fe))	-
Clause no4.1 (Description)	-
Clause 4.3 Table 1 (Arsenic(as As))	-

-
All test facilities are available as per the IS except chemical tests for determining Lead Content (Clause 4.3 and Table 1)

15052

BIS, Patna Branch Laboratory (PBL)

None

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8.2 (Press)	-
Cl 13 (Weight)	-
Cl. 14 & Cl. 15 (Pitch of corrugation (average of 4))	-
Cl. 14 & Cl. 15 (Depth of corrugation (average of 4))	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-
Cl. 14 (Cl. 14 & Cl 15 (Width))	-
Cl. 14 (Cl. 14 & Cl 15 (Length))	-
Cl.12 (Freedom from defects)	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-
5.1 (carbon)	-
5.1 (manganese)	-
5.1 (phosphorus)	-
5.1 (sulphur)	-
7.4 (Mass of Coating: Single Spot Test)	-
7.4 (Mass of Coating: Triple Spot Test)	-

-
All test facilities are available as per the IS except tests for - i. Microalloying elements and Aluminium (Clause 5.1) ii. Surface Finish (Clause 9)

15053

BIS, Patna Branch Laboratory (PBL)

None

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Workmanship)	-
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
6.1 ( Nitrogen%)	-

-
All test facilities are available as per the IS except tests for microalloying elements (Nb, V, Ti and B) and Aluminium (Clause 6.2)

15054

BIS, Patna Branch Laboratory (PBL)

None

IS 9825 (2003)

Chlorine tablets - Specification (Second Revision)

Rs.4330/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.2 (Description)	-
Cl.4.3 (Size (Mass of tablet))	-
Cl.4.3 (Available Chlorine (Annex A))	-
Cl.4.4 (Moisture (Annex B))	-
Cl.4.4 (Shelf Life (Annex A))	-

-
All test facilities are available as per the IS

15055

BIS, Patna Branch Laboratory (PBL)

None

IS 1011 (2002)

Biscuits - Specification (Fourth Revision)

Rs.3280/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (General Requirement)	-
6.3 Table 2 i (Moisture)	-
6.3 Table 2 ii (Acid insoluble ash (on dry basis))	-
6.3 Table 2 iii (Acidity of extracted fat (as oleic acid))	-

-
All test facilities are available as per the IS

15056

BIS, Patna Branch Laboratory (PBL)

None

IS 1759 (1986)

Specification for powrahs (Second Revision)

Rs.2100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Shapes)	-
2.1 (Dimensions of Powrah-A)	-
2.1 (Dimensions of Powrah-B)	-
2.1 (Dimensions of Powrah-C)	-
2.1 (Dimensions of Powrah-D)	-
2.1 (Dimensions of Powrah-E)	-
2.1 (Dimensions of Powrah-F)	-
2.1 (Dimensions of Powrah-G)	-
2 Fig 11 (Dimensions of Eye-H)	-
2 Fig 11 (Dimensions of Eye-J)	-
2 Fig 11 (Dimensions of Eye-K)	-
2 Fig 11 (Dimensions of Eye-L)	-
2 Fig 11 (Dimensions of Eye-M)	-
2.3 (Blade thickness)	-
4 (Mass)	-
5.2 (Hardness)	-
6.1 (Workmanship & Finish)	-
6.1 (Workmanship & Finish)	-
6.1 (Workmanship & Finish)	-
6.1 (Workmanship & Finish)	-
6.2 (Workmanship & Finish)	-
7.1 (Preservative Treatment)	-
7.2 (Preservative Treatment)	-
10.1 (Drop test)	-

-
All test facilities are available as per the IS except- i. Hardness Test (Clause 5.2) ii. Drop Test Facility With Platform Made of Mild Steel Plate (Clause 10)

15057

BIS, Patna Branch Laboratory (PBL)

None

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Type A/Type B)	-
5 Table-1 (Sizes Diameter of Line wire)	-
5 Table-1 (Sizes Diamater of Point wire)	-
5 Table-1 (Sizes Mass of Completed barbed wire)	-
5 Table-1 (Sizes Distance between two barbs)	-
5 Table-1 (Sizes No. of Lays between the two consequtive barbs)	-
7.1 (Manufacture)	-
7.2 (Manufacture)	-
7.2 (Manufacture)	-
7.3 (Manufacture)	-
8 (CHROMATING)	-
9.1 (Freedom from defects)	-
9.2 (Freedom from defects)	-
9.2 (Freedom from defects)	-
9.2 (Freedom from defects)	-
12.1 (Tensile Strength)	-
12.1 (Breaking load)	-
12.2.1 (Mass of zinc coating (line wire))	-
12.2.2 (Mass of zinc coating (point wire))	-
12.2 (Uniformity of zinc coating)	-

-
All test facilities are available as per the IS except Aluminium (Clause 6) Note: Point wire sample before fabrication is required. *- The exact sample type, size and quantity may be ascertained from the latest product manual issued by BIS.

15058

BIS, Patna Branch Laboratory (PBL)

None

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

9200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 10.1 (Manufacturing )	-
Cl 10.1.1 (Manufacturing )	-
7, 6.1.1 (CARBON)	-
7, 6.1.1 (SULPHUR)	-
7, 6.1.1 (PHOSPHURS)	-
7, 6.1.1 (MANGANESE)	-
12 AND AS PER IS 4736 (UNIFORMITY OF ZINC COATING)	-
12 AND AS PER IS 4736 (MASS OF ZINC COATING)	-
Cl. 14.1 (Tensile Strength)	-
Clause 14.1.1 (Elongation Percent)	-
Cl. 14.2 (Bend Test (uto and including 50 mm NB))	-
Cl. 14.3 (Flattening test (Over 50 mm NB))	-
Cl. 15 (Workmanship)	-
Cl. 8 Table 3,4 & 5 (Outside Diameter)	-
Cl. 8, 9 Table 3,4 & 5 (Thickness)	-
Cl. 8, 9 Table 3,4 & 5 (Mass of Tube)	-
Cl. 6.5 (Height of Internal Fin)	-
Cl. 3.3, 10.2 (Plain End)	-
Clause 8.1 (Table3,4,5) (Nominal Bore)	-
Clause 11.1 (Random Length)	-
Clause 11.2 (Exact Length)	-
Clause 11.3 (Approximate Length)	-

-
All test facilities are available as per the IS except- i. Hydrostatic Test (Clause 13) ii. Tests for microalloying elements i.e.,Chromium, Molybdenum,Vanadium, Nickel, Copper, Niobium, Boron, Titanium and Aluminium (Clause 6.1.1) Note: Sample size of 3m full length (two samples each of preferred size 1.5 m) may be supplied for testing. *- The exact sample type, size and quantity may be ascertained from the latest product manual issued by BIS.

15059

BIS, Patna Branch Laboratory (PBL)

None

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

Rs.7200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Workmanship)	-
Cl 9 (Nominal Diameter & Out Of Shape)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-

-
All test facilities are available as per the IS except test of Aluminium (Table 1 and Note 2 of Clause 6.1)

15060

BIS, Southern Regional Laboratory (SRL)

None

IS 8249 (2019)

Zinc sulphate heptahydrate, agricultural grade - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(Clauses 3.2 and 6.2) Table 1 (Matter insoluble in water)	-
(Clauses 3.2 and 6.2) Table 1 (Zinc (as Zn))	-
(Clauses 3.2 and 6.2) Table 1 (Lead (as Pb))	-
(Clauses 3.2 and 6.2) Table 1 (Copper (as Cu))	-
(Clauses 3.2 and 6.2) Table 1 (Magnesium (as Mg))	-
(Clauses 3.2 and 6.2) Table 1 (pH)	-
(Clauses 3.2 and 6.2) Table 1 (Cadmium (as Cd))	-
(Clauses 3.2 and 6.2) Table 1 (Arsenic (as As))	-
(Clauses 3.2 and 6.2) Table 1 (Sulphur (as S))	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number