BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15546 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

15121

BIS, Western Regional Laboratory (WRL)

None

IS 9295 (1983)

Specification for steel tubes for idlers for belt conveyors (First Revision)

Rs 5100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
7.1 (Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
8.1.1 Table 1 (Tensile Strength- IS 1608(1))	-
8.1.1 Table 1 (Yield Strength- IS 1608)	-
8.2 (Drift Expansion Test- IS 2335)	-
8.3 (Flattening Test- IS 2328)	-
9.1 Table 2 (Outside Diameter)	-
9.1 Table 2 (Thickness)	-
9.1 Table 2 (Mass)	-
10 (Hardness)	-
13.1.1 (Ovality)	-
13.1.2 (Eccentricity)	-
15.1 (Straightness)	-
16.1 (Length)	-

-
Test facilities are not available for the following: 1.Except Drift Expansion

15122

BIS, Western Regional Laboratory (WRL)

None

IS 8737 (2017)

Valve fittings for use with liquefied petroleum gas (LPG) cylinders for more than 5 litre water capacity - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.1Sl.No.i (Copper)	-
4.4 (Izod impact strength-IS 1598)	-
9.2a (Cycle Test)	-
9.5bii (Pneumatic Test ,after cycle test: Tightness of Valve Spindle and Valve Housing)	-
4.3.1a (Tensile Strength-IS 1608)	-
4.3.1b (Elongation-IS 1608)	-
7.10 (The minimum finished wall thickness at any portion of the valve shall not be less than 2.5 mm)	-
9.3 (Operation Test)	-
9.5bii (Pneumatic Test ,after cycle test: Tightness of Valve Spindle and Valve Housing)	-
9.5biii (Pneumatic Test ,after cycle test: Tightness of Joint Packing and Housing)	-
8.3.1 (Pneumatic Test: Tightness of Joint Packing (in Valve Outlet) and Valve Spindle)	-
8.3.2 (Pneumatic Test: Tightness of Valve Spindle and Valve Housing)	-
8.3.3 (Pneumatic Test: Tightness of Joint Packing and Housing)	-

-
"1.Cycles test 2. Security Cap /Nut 3. Spring a) Load Test b)Permanent set test c)Rust proofness of spring"

15123

BIS, Western Regional Laboratory (WRL)

None

IS 8423 (1994)

Specification for controlled percolating hose for fire fighting

Rs. 4200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1.1 (The nominal internal diameter of hose shall be 38, SO, 63 and 70 rom.The internal diameter of the hose shall be measured by a suitable tapered plug gauge, and shall conform to the specified diameter within a tolerance of + 2·0 mm. -0'0)	-
Cl.5. (The hose length shall be 30 m or of such length as required.)	-
Cl.6 (The hose shall be flexible and on being machine coiled, the diameter of the coil of 30 m hose shall not exceed 45 em for all slzes in dry state without coupling. The coil diameter shall be measured at the widest part of the coil.)	-
Cl.7 (The average mass oC hose per metre shall not be more than that prescribed in Table 1. For determination of mass, sample of the hose shall be conditioned at 27 ± 2°C and 65 ± 5 percent relative humidity Cor a period of at least 48 hours and then shall be weighed under same conditions.)	-
Cl.8 (The percolation, when tested in accordance with the procedure laid down in 8.1.1 shall not exceed the limits prescribed in Table 2.)	-
Cl.9 (The full length sample of the dry hose is connected to the pump fitted with water and pressure built up to. 7 kaf/cn,' (70 N/cm' ) steadily over a period of two minutes. After the hose has been at pressure 7 kif/em' ( 70 NIemi) for a period of S minutes, a visual inspection I is made of the length to ascertain the evenness and degree of wetting out along the complete length of hose and at least 75 percent of the hose jacket shall be evenly and consistently wetted out in this manner.)	-
Cl.10 (Full length of hose shall be subjected to an internal hydraulic pressure of 2'1 MPa (21'4 kgf/ems ) at the rate of I MPa ( 10'2 kaf/em· )/ minute in ac.cordance with 1.3 of IS 443 : 191~ and maintained for a period of one minute. During this test. the hose shan not show breakage of yarn.)	-

-
-

15124

BIS, Eastern Regional Laboratory (ERL)

None

IS 204 : Part 1 (1991)

Tower bolts - Specification: Part 1 ferrous metals (Fifth Revision)

All grades (except tests mentioned in remarks)

Rs.2100.00. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Carbon - IS 228)	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Manganese - IS 228)	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Phosphorus - IS 228)	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017) (Chemical composition - Sulphur - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Carbon - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Manganese - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Sulphur - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Phosphorus - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Silicon - IS 228)	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011) (Chemical composition - Carbon Equivalen(CE) - IS 228)	-
4 -Table 5- iii (Ref. Cl 6.1 of IS 210 : 2009) (Chemical composition - Sulphur and/or Phosphorous)	-
5.1 (General)	-
5.2.1 Table 1 (Particulars-Barrel Tower Bolts)	-
5.2.2 Table 2 (Particulars-Sami Barrel Tower Bolts)	-
5.2.3 Table 3 (Particulars-Riveted or Spot Welded Tower Bolts)	-
5.2.4 Table 4 (Particulars-Skeleton Tower Bolts)	-
6.1- Table 1 (Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-
6.1- Table 1 (Dimension of Barrel tower bolts-Minimum No. of equally Spaced Screw holes in Barrel and Socket for wood screw no 6)	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G )	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-
6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts- 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7. Length of Strap-E" 8.Thickness of Back Plate -F 9.Thickness of Socket or Upper Plate and Strap- F" 10.Dia of bore of Bolt Plate or socket- G 11. Length of Alternative Socket-H )	-
6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Staple -F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob-J)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts- Nos of Staples)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 6)	-
TABLE-5 CLAUSES 4.1 (ALUMINIUM)	-
TABLE-5 CLAUSES 4.1 (NITROGEN)	-

-
Chem-Facility not available for micro alloying elements, for cast iron- facility not available for Sulphur

15125

BIS, Central Laboratory (CL)

None

IS 8446 (1991)

Pesticide - Carbendazim (MBC) WP - Specification (First Revision)

Rs 4700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.3 table 1 (Material passing through 75 micron IS sieve)	-
3.3 table 1 (suspensibility)	-
3.3 table 1 (Acidity (as H2SO4), or Alkalinity (as NaOH) )	-

-
-

15126

BIS, Western Regional Laboratory (WRL)

None

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

Rs.7200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9 (Nominal Diameter & Out Of Shape)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-

-
Test facilities are not available for the following: 1. Chemical composition (Al)

15127

BIS, Central Laboratory (CL)

None

IS 3074 (2013)

Steel tubes for automotive purposes - Specification (Third Revision)

4200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Workmanship)	-
6 (STRAIGHTNESS)	-
8.2,15,17,22, Table 3,5 &7 (Tensile Tests,IS 1608 Part 1)	-
8.3,18, (Flattening Test)	-
8.4 (Crushing Test)	-
8.5 (Drift Test)	-
7, 20,Table 1,2,4 &6 ( C)	-
7, Table 1,2,4 &6 (S)	-
7, Table 1,2,4 &6 (P)	-
7, Table 1,2,4 &6 (Mn)	-
7, Table 1,2,4 &6 (Si)	-
7, Table 1,2,4 &6 (Cr)	-
7, Table 1,2,4 &6 (Mo)	-
7, Table 1,2,4 &6 (Ni)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding -; Leak tightness Test (Cl 23)

15128

BIS, Western Regional Laboratory (WRL)

None

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

Rs.2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl 2.2.2 (Dimensions)	-

-
The following test facilities are not available: 6.3 Effect on water

15129

BIS, Eastern Regional Laboratory (ERL)

None

IS 9962 (1981)

Specification for steel wire for needles

all size and grade

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (Nominal size of wire-IS 9962)	-
7.1 (Tensile Test - IS 1608(Pt -1))	-
9 (Freedom from defects-IS 9962)	-
7.2 (Test for Spheroidised -IS 9962)	-
7.3 (Decarburisation-IS 9962)	-
8 (Finish - IS 9962)	-

-
Grade,size and finish to be declared

15130

BIS, Western Regional Laboratory (WRL)

None

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

Rs.2400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4 (Minimum Thickness)	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1 (Minimum Socket Length)	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1 (Out-of-roundness tolerances of socket inside diameter)	-
Cl. 6.1 (Stress Relief Test- Appendix A)	-
Cl. 6.2 (Opacity- Appendix B)	-
Cl. 6.4 (Short-Term Hydraulic Test- Appendix D)	-
6.4 (Short-Term Hydraulic Test)	-

-
The following test facilities are not available: 6.3 Effect on water

15131

BIS, Northern Regional Laboratory (NRL)

None

IS 5312 : Part 1 (2004)

Swing Check Type Reflux (Non-Return] Valves for Water Works Purposes - Part 1 : Single-Door Pattern

Rs 5700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.1 (Actual bore)	-
6.2 (Manufacture Dimensions Table 2 )	-
6.2 (Manufacture Dimensions Table 2 )	-
7.1 (Coating)	-
8.2 (Hydrostatic Body Test )	-

-
All test excluding HST for size above 300 mm, Facility for chemical testing is not available

15132

BIS, Northern Regional Laboratory (NRL)

None

IS 781 (1984)

Specification for cast copper alloy screw down bib taps and stop valves for water services (Third Revision)

Rs.2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Dimensions & Tolerances)	-
Cl 7 (MINIMUM MASS)	-
Cl 9 (Testing)	-

-
Facility for chemical testing is not available

15133

BIS, Western Regional Laboratory (WRL)

None

IS 15490 (2017)

Seamless steel cylinders for on - Board storage of compressed natural gas as a fuel for automotive vehicles - Specification (First Revision)

16297 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.2 (Cylinder shape and wall thickness)	-
7.6 (Out-of-Roundness)	-
7.7 (Mean Diameter)	-
7.8 (Straightness)	-
9.3.1 (Tensile Strength)	-
9.3.2 (Bend test)	-
9.3.3 (Impact test)	-
5.2.1,5.2.2,5.3 (Carbon)	-
5.2.1,5.2.2,5.3 (Manganese)	-
5.2.1,5.2.2,5.3 (Silicon)	-
5.2.1,5.2.2,5.3 (Sulphur)	-
5.2.1,5.2.2,5.3 (Phosphorus)	-

-
Test facilities are not available for the following: 1. Cr, Ni, Mo, V, Al, N, B, Zr 2.Pressure cycling Test 3. Base check 4. Hydrostatic Stretch Test 5. Leakage Test 6.Neck threads 7. Surface Defects 8. Verticality 9. Hydraulic Bursting Test 10. Sulphide Stress Cracking Resistance Test 11 Ultrasonic testing 12 Leakage before breakage test 13 Bonfire test Remark: Prepared piece for tensile (2 nos), bend (4 nos) and impact (3 nos)

15134

BIS, Western Regional Laboratory (WRL)

None

IS 7285 : Part 1 (2018)

Refillable seamless steel gas cylinders - Specification: Part 1 normalized steel cylinders (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.5 (Mean Diameter)	-
10.1.3 a) & Clause 5.4 Table 3, i) ( Tensile strength (Rg) )	-
10.1.3 a) & Clause 5.4 Table 3, ii) ( Yield strength (Re))	-
Clauses 6.8 and 10.3.1,Table 4 iii), Sr.no.3 (Impact Test-Cylinder Diameter Dm >140 mm i) Direction- Transverse: ii) Test temperature, in °C –20)	-
Clauses 5.2.1 and 5.4, Table 1 (Controls on Chemical Composition)	-

-
Test facilities are not available for the following: 1. Cr, Ni, Mo, V, Al, N, B, Zr 2.Pressure cycling Test 3. Base check 4. Hydrostatic Stretch Test 5. Leakage Test 6.Neck threads 7. Surface Defects 8. Verticality 9. Hydraulic Bursting Test 10. Sulphide Stress Cracking Resistance Test 11 Ultrasonic testing Remark: Prepared piece for tensile (2 nos), bend (4 nos) and impact (3 nos)

15135

BIS, Central Laboratory (CL)

None

IS 3039 (1988)

Specification for structural steel for construction of hulls of ships (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

15136

BIS, Western Regional Laboratory (WRL)

None

IS 7142 (1995)

Welded low carbon steel cylinders for low pressure liquifiable gases not exceeding 5 litre water capacity - Specification (First Revision)

Rs. 9552/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
13 (CHECKING OF WATER CAPACITY)	-
15.1 (PNEUMATIC LEAKAGE TEST)	-
17.3 i) (Acceptance test Parent Metal Longitudinal test specimen;)	-
17.3 ii) (Acceptance test Parent Metal Longitudinal test specimen;)	-
17.3 iii) (Acceptance test Parent Metal Longitudinal test specimen;)	-
17.3 v) (Acceptance test Parent Metal Circumferential test specimen;)	-
17.3 vi) (Acceptance test Parent Metal Circumferential test specimen;)	-
17.3 vii) (Acceptance test Weld joint test Specimen)	-
17.4 (Bend test across weld)	-
17.6 (Minimum Thickness Test)	-
14.1.1 (PROOF TEST)	-

-
Test facilities are not available for the following: 1. Thread gauges

15137

BIS, Western Regional Laboratory (WRL)

None

IS 7092 : Part 2 (1987)

Specification for aluminium alloy tube for irrigation purposes: Part 2 extruded tube (Second Revision)

Rs 11230/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6.2 (Ultimate Tensile Strength- IS 2657)	-
Cl.6.2 (0.2 percent proof strength- IS 2657)	-
Cl.6.2 (Elongation on 50 mm gauge length- IS 2657)	-
Cl. 6.3 (Drift Expanding Test ( Expanded Inside Diameter- IS 2335)	-
Cl. 6.4 (Hydrostatic Pressure Test-Cl. 6.4)	-
Cl.7.1, Table 2 (Outside Diameter-)	-
Cl.7.1, Table 2 (Roundness or Ovality)	-
Cl.7.1, Table 2 (Wall Thickness)	-
Cl. 7.2 (Length)	-

-
" 1. Tensile Test 2. Hydrostatic Machine "

15138

BIS, Western Regional Laboratory (WRL)

None

IS 6603 (2001)

Stainless steel bars and flats - Specification (First Revision)

3150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Carbon -Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Silicon- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Manganese- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Sulphur- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1 (Phosphorus- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)	-
9.1, Table 3 (0.2 Percent Proof Stress, MPa)	-
9.2, Table 3 (Tensile Strength, MPa)	-
9.3, Table 3 (Elongation ,Percent)	-
9.4, Table 3 (Annealed Hardness, HB-IS 1500: Pt 1)	-
12 (Dimensions & Tolerances, mm-IS 6603)	-
9.5, Table 3 (Charpy Impact Test, J-IS 1499)	-

-
Test facilities are not available for the following: 1. Ti, Nb, Mo, Cu 2. Corrosion resistance Remark: Prepared piece of impact (3 nos)

15139

BIS, Western Regional Laboratory (WRL)

None

IS 6529 (1996)

Stainless steel blooms, billets and slabs for forging - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1,7.2,7.3 Table 1 (Carbon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Sulphur-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Phosphorous-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Manganese-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7.1,7.2,7.3 Table 1 (Silicon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Test facilities are not available for the following: 1. Ni, Cr, Mo, Ti, Nb, N 2. Corrosion Test

15140

BIS, Northern Regional Laboratory (NRL)

None

IS 6006 (2014)

Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision)

Rs 4035/- Excluding Proof Stress and Relaxation Test View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Weight)	-
Cl 7 (Tensile Test On UTM)	-
Cl 4 (Length )	-
Cl 4.5 (Workmanship)	-
Cl 4.5 (Workmanship)	-
Cl 4.5 (Workmanship)	-
Cl 4.5 (Workmanship)	-
4.1.2 (sulphur)	-
4.1.2 (phosphorus)	-

-
Test Facility Complete for Chemical Except Stress relaxation test, Proof stress

15141

BIS, Northern Regional Laboratory (NRL)

None

IS 3575 (1993)

Bitumen drums - Specification (Third Revision)

1800/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Closure (Figure 2))	-
7.1 (Finish)	-
7.2 (Finish)	-

-
Except air pressure test and Microalloying elements

15142

BIS, Western Regional Laboratory (WRL)

None

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

3900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Dimensions of pipes)	-
8.1 (Hydraulic characteristics)	-
8.2 (Reversion)	-
8.4 (Melt Flow Rate)	-
Cl. 8.5, IS 2530-1963, Cl. 16 (Carbon Black Dispersion)	-
8.3 (Density)	-

-
The following test facilities are not available: (1)Internal Pressure creep rupture test (2)Tensile Strength for Butt-fusion (3) Slow Crack Growth rate test (4) Depth of strip (5) Overall Migration (7) Carbon Black content (8) For Size above 250 mm

15143

BIS, Western Regional Laboratory (WRL)

None

IS 6240 (2008)

Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision)

9710 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 13 (Length, Width & Thickness)	-
Cl 7 (UTM)	-
Cl 8 (Press)	-
Cl 7 (UTM)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-

-
Test facilities are not available for the following: 1. Al, N, Micro alloying element 2. Erichsen Cuppling Machine

15144

BIS, Western Regional Laboratory (WRL)

None

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-

-
Test facilities are not available for the following: 1. Micro alloy, N, Al, Cu, Cr, Mo, Ni

15145

BIS, Northern Regional Laboratory (NRL)

None

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1,Table 4&Table 6 (Tensile Test - IS 1608(Pt -1))	-
10.2,Table 4&Table 5 (Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-
17 (Dimension and tolerance)	-
6 (Freedom from defects , IS 6911)	-
15 (Surface Finish)	-

-
Facility for chemical testing is not available, Erichsen Cupping(Cl11), Corrosion(Cl 12), Proof stress

15146

BIS, Western Regional Laboratory (WRL)

None

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

7290 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.7.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Depth))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Width))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections(Thickness))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Weigth))	-
Cl. 10.1, 14.1, 18.1 (Straightness)	-
Cl. 10.4, Fig 2 (Concavity, X1)	-
Cl. 10.4, Fig 2 (Convexity, X2)	-
Cl. 10.5, Fig 3 (Squareness of side)	-
Cl. 10.6, Fig 4 (External Corner Radius)	-
Cl. 10.5, Fig 3 (Squareness of side)	-
Cl. 10.6, Fig 4 (External Corner Radius)	-
Cl. 10.7, Fig 5 (Total twist, V)	-
Cl. 15.2, Table 3 (Tensile Strength- IS 1608)	-
Cl. 15.2, Table 3 (Yield Strength- IS 1608)	-
Cl. 15.2, Table 3 (Elongation- IS 1608)	-
Cl. 14.1 (Exact Length)	-
Cl. 14.1 (Weight on individual length)	-
Cl. 14.1 (Exact Length)	-
Cl. 14.1 (Weight on individual length)	-

-
Test facilities are not available for the following: 1. Cu

15147

BIS, Central Laboratory (CL)

None

IS 7231 (1994)

plastic flushing cisterns for waterclosets and urinals

Rs.8100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Cistern)	-
Cl 5.1 (Cistern)	-
Cl 5.2 (Cover)	-
Cl 5.3 (Flush pipe)	-
Cl 5.3 (Flush pipe)	-
Cl 5.4 (Inlet and overflow holes)	-
Cl 5.5 (Float valve)	-
Cl 5.6 (Operating mechanism / lever)	-
Cl 5.7 (String (Chain))	-
Cl 5.8 (Overflow pipe)	-
Cl 5.8 (Overflow pipe)	-
Cl 7.1 (Flushing Arrangements)	-
Cl 7.2 (Working water level)	-
Cl 7.3 (Freedom from self-siphonage)	-
Cl 7.4 (Reduced water level)	-
Cl 7.5 (Discharge capacity)	-
Cl 7.6 & 9.2 (Discharge rate )	-
Cl 8.1 (Distortion resistance test)	-
(Cl 8.2) (Dead load test)	-
(Cl 8.3) (Front thrust test)	-
(Cl 8.4) (Impact test)	-
(Cl 9.3) (Endurance test)	-
(Cl 9.3) (Endurance test)	-
(Cl.6) (Finish)	-

-
-

15148

BIS, Western Regional Laboratory (WRL)

None

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

Rs.7500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Tensile Test & Flattening Test)	-
Cl 7 (Outer Diameter, Thickness, Mass & Straightness)	-
Cl 9 (Pipe ends, Angle of bevel & Root Face )	-
Cl 10 (Outer Diameter & Overall Length)	-
Cl 10 (Outer Diameter & Overall Length)	-
Cl 9 (Pipe ends, Angle of bevel & Root Face )	-
Cl 10 (Outer Diameter & Overall Length)	-
Cl 10 (Outer Diameter & Overall Length)	-
5.2 (phosphorus)	-
5.2 (sulphur)	-

-
Except Hydrostatic test (Cl.8)

15149

BIS, Northern Regional Laboratory (NRL)

None

IS 3502 (2009)

Steel chequered plates (Third Revision)

2985 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Tensile Test)	-
Cl 9 (Press)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl 5 (Workmanship)	-
Cl 6 (Workmanship)	-
Cl.4.1 (IS-2062, E250A) (CARBON)	-
Cl.4.1 (IS-2062, E250A) (SULPHUR)	-
Cl.4.1 (IS-2062, E250A) (PHOSPHURS)	-
Cl.4.1 (IS-2062, E250A) (MANGANESE)	-
Cl.4.1 (IS-2062, E250A) (SILICON)	-
Cl.4.1 (IS-2062, E250A) (CARBON EQUIVALENT)	-
Cl.4.1 (IS-2062, E250A) (NITROGEN)	-
4 (Micro Alloying elements)	-
4 (Aluminium as Al)	-
4 (Niobium as Nb)	-
4 (Vanadium as V)	-
4 (Titanium as Ti)	-

-
-

15150

BIS, Western Regional Laboratory (WRL)

None

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 & Table 3 (UTM)	-
Cl 9 (Press)	-
Cl 12 & 13 (Length, Width & Thickness)	-
Cl 12 & 13 (Length, Width & Thickness)	-
7.1 (Carbon %)	-
7.1 (Manganese %)	-
7.1 (Phosphorus %)	-
7.1 (Sulphur %)	-
7.1 (Silicon %)	-

-
Test facilities are not available for the following: 1. V, Nb, Ti, Al, Nitrogen, Mn, Cr, Mo, V, Ni, Cu

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number