BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15361 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

1741

OMRESEARCH & TESTING LABORATORY PRIVATE LIMITED

5197706

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

Class I, II, III

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	500	-
6.2.1 Annex B(Chloride Content of Resin)	-	3000	-
6.3(Compound Properties)	-	3000	-
6.3.1 Annex B(Chloride content)	-	3000	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	2000	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	1500	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	500	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	500	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	500	-
7.1.3 (Effective length)	-	500	-
8(Pipe Ends)	-	500	-
9.1(Visual Appearance)	-	500	-
9.2 IS 12235 (Part 3)(Opacity)	-	2000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	3000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	3000	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	3000	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	3000	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	3000	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	3000	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	3000	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	2000	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	2000	-
9.6 IS 12235(Part 14)(Density)	-	1000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10000	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	10000	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	2000	-
10.4 IS 12235(Part 19)(Flattening Test)	-	2000	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	3000	-

18 Mar, 2029

-
-

1742

OMRESEARCH & TESTING LABORATORY PRIVATE LIMITED

5197706

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

PE 63, PE 80, PE 100

27000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	1000	-
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1000	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	1000	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	1000	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	1000	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	1000	-
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	1000	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	1000	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	1000	-
5.2.1.1, T2(Compound ash content - Any Method)	-	1000	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	1000	-
5.3(Density of Higher olefin - IS 7328:2020)	-	1000	-
5.3(Olefin Constituents- 14333-2022)	-	1000	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	1000	-
6(Pipe Description - IS 14333-2022)	-	500	-
6.2(Colour- IS 14333-2022)	-	500	-
7.1(Visual Appearance- IS 14333-2022)	-	500	-
7.2(Length- IS 14333-2022)	-	500	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	500	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	500	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	500	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	10000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	10000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	10000	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	10000	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	2000	-
8.3(Carbon black content- IS 2530-1963)	-	1000	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	1000	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	2000	-
8.6(Density-IS 7328:2020)	-	2000	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	3000	-
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	3000	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	3000	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	10000	-
5.4(Antioxidant - Any Method)	-	1000	-
7.3(Coiling- IS 14333-2022)	-	1000	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	3000	-

18 Mar, 2029

-
Exclusion: Test facility complete upto Nominal Diameter 250mm

1743

OMRESEARCH & TESTING LABORATORY PRIVATE LIMITED

5197706

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

Type A & B

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	250	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	250	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	250	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	250	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	250	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	250	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	250	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	250	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	500	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	500	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	2000	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	2000	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2000	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	2000	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	2000	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1500	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1500	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	2000	-
8.6(Effect on Water Test)	-	3000	-
14(Marking)	-	1000	-

18 Mar, 2029

-
-

1744

ADS LABTECH, GHAZIABAD

8178326

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

UNPLASTICIZEDNON-PRESSUREPOLYVINYL CHLORIDE( PVC-U) PIPES FORUSEIN UNDERGROUNDDRAINAGEANDSEWERAGE SYSTEMS

21300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1000	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	1000	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	1000	-
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	1000	-
6.1.3 (Length of Pipe)	-	1000	-
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	1000	-
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	1000	-
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	1000	-
6.1.4, Table 3(iv) Length of spigot, l1)	-	1000	-
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	1000	-
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	1000	-
6.1.4.1 (e3min=0.75e)	-	1000	-
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	1000	-
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	1000	-
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	1000	-
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	1000	-
7(Physical characteristics )	-	1000	-
7.1(Appearance:- )	-	1000	-
7.1(Appearance:- )	-	1000	-
7.2(Colour )	-	1000	-
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1000	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1000	-
8(MECHANICAL CHARACTERISTICS)	-	1000	-
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1000	-
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1000	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	1000	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	1000	-
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	1000	-
9.2 IS 14182(b) Solvent cement)	-	1000	-
10(Performance requirements)	-	1000	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	1000	-
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1000	-
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	1000	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	1000	-
'7.5 (amdt.7)(Effect on Water (Type test))	-	1000	-
5.3(Qualitative)	-	1000	-
12(Marking)	-	1000	-
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	2000	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	500	all dimensions
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	500	all dimensions
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	500	all dimensions
6.1.3 (Length of Pipe)	-	500	all dimensions
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	500	all dimensions
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	100	.
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	100	.
6.1.4, Table 3(iv) Length of spigot, l1)	-	100	-
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	100	.
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	100	.
6.1.4.1 (e3min=0.75e)	-	100	.
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	100	.
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	100	.
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	100	.
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	100	.
7(Physical characteristics )	-	100	.
7.1(Appearance:- )	-	0	.
7.1(Appearance:- )	-	0	.
7.2(Colour )	-	0	.
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	500	.
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	500	.
8(MECHANICAL CHARACTERISTICS)	-	1000	.
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1200	.
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1200	.
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	3000	.
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	5000	.
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	100	.
9.2 IS 14182(b) Solvent cement)	-	200	.
10(Performance requirements)	-	500	.
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	1000	.
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	2300	.
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	2300	.
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	2300	.
'7.5 (amdt.7)(Effect on Water (Type test))	-	3000	.
5.3(Qualitative)	-	0	.
12(Marking)	-	0	.
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	300	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	100	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	100	-
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	100	-
6.1.3 (Length of Pipe)	-	100	-
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	500	-
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	300	-
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	200	-
6.1.4, Table 3(iv) Length of spigot, l1)	-	200	-
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	200	-
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	200	-
6.1.4.1 (e3min=0.75e)	-	200	-
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	200	-
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	200	-
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	200	-
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	200	-
7(Physical characteristics )	-	500	-
7.1(Appearance:- )	-	0	-
7.1(Appearance:- )	-	0	-
7.2(Colour )	-	0	-
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	700	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	800	-
8(MECHANICAL CHARACTERISTICS)	-	1000	-
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1000	-
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	400	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	2000	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	5000	-
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	1000	-
9.2 IS 14182(b) Solvent cement)	-	200	-
10(Performance requirements)	-	1000	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	1000	-
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1000	-
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	1000	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	1000	-
'7.5 (amdt.7)(Effect on Water (Type test))	-	3000	-
5.3(Qualitative)	-	0	-
12(Marking)	-	0	-

15 May, 2027

-
Included w.e.f 30.01.2026

1745

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 5484 (2023)

EC GRADE ALUMINIUM ROD PRODUCED BY CONTINUOUS CASTING AND ROLLING - SPECIFICATION

ALL

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Manufacture)	-	1000	-
Cl-6.1(Grades and chemical composition of EC grade aluminium rod produced)	-	1000	-
Cl-6.2(Chemical analysis of the material)	-	1000	-
Cl-7.1(General condition for delivery and inspection relating)	-	1000	-
Cl-9(Ultimate tensile strength and elongation)	-	1000	-
Cl-10.1(Resistivity)	-	1000	-
Cl-10.1(electrical conductivity)	-	1000	-
Cl-10.1.1(Resistivity and Conductivity Limit)	-	1000	-
Cl-11(Dimensions)	-	1000	-
Cl-13(Finish and freedom from defects)	-	1000	-
Cl-14(Rejection and retest)	-	0	-
Cl-16(Marking)	-	0	-
CL 9(ULTIMATE TENSILE STRENGTH AND ELONGATION)	-	0	-
CL 11(DIMENSIONS)	-	0	-
CL 13(FINISH AND FREEDOM FROM DEFECTS)	-	0	-
9(Elongation)	-	0	-
12(Joint)	-	0	-
Cl.6.1 as per IS 4026(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Copper - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Manganese - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Magnesium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Chromium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Zinc - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.6.1 as per IS 4026(Titanium - IS 228 and its parts or any other intrumental/chemical methods)	-	0	-

08 May, 2028

-
Included w.e.f 31.12.2025

1746

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 12425 (2022)

SPECIFICATION FOR STEEPLECHASE HURDLES First Revision

ALL

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2(Top Bar)	-	2500	-
Cl.2.1(Dimension)	-	2500	-
Cl.2.2(Mass)	-	2500	-
Cl.3(Packing and Marking)	-	0	-

08 May, 2028

-
Included w.e.f 31.12.2025

1747

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 4508 (2024)

OPEN ENDED SLUGGING WRENCHES ( SPANNERS ) - SPECIFICATION ( Second Revision )

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Dimensions)	-	1000	-
Clause.4.0(Carbon)	-	1000	-
Clause.4.0(Sulphur)	-	1000	-
Clause.4.0(Phosphorus)	-	1000	-
Clause.4.0(Nickel)	-	1000	-
Clause.4.0(Molybdenum)	-	1000	-
Clause.4.0(Chromium)	-	1000	-
Clause.4.0(Silicon)	-	1000	-
Clause.4.0(Manganese)	-	1000	-
Clause.5.0(Hardness)	-	1000	-
Clause.6.0(Manufacture,Workmanship & finish)	-	1000	-
Clause.7.0(Preservation & packing)	-	1000	-
Clause.8.0(Sampling)	-	1000	-
Clause.9.0(Designation)	-	1000	-
Clause.10.0(Marking)	-	1000	-

08 May, 2028

-
Included w.e.f 31.12.2025

1748

Elutech Laboratory and Calibration Services, Jaipur

9179806

IS 9763 (2000)

Plastics Bib Taps, Pillar Taps, Angle Valves and Stop Valves for Hot and Cold Water Services -

Bib Tap / Pillar Tap / Angle Valve / Stop Valve

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl. 5)(Nominal Size)	-	8500	8500 for all tests of product.
(Cl. 7)(Identification)	-	8500	8500 for all tests of product.
(Cl. 7)(Identification)	-	8500	8500 for all tests of product.
(Cl. 4)(Materials)	-	0	-
(Cl.6 , Table 3)(Dimensions)	-	8500	8500 for all tests of product.
(Cl 8)(Construction,Workmanship and Finish)	-	8500	8500 for all tests of product.
(Cl 8)(Construction,Workmanship and Finish)	-	0	8500 for all tests of product.
(Cl 8)(Construction,Workmanship and Finish)	-	0	8500 for all tests of product.
(Cl 8)(Construction,Workmanship and Finish)	-	8500	8500 for all tests of product.
(Cl 8)(Construction,Workmanship and Finish)	-	8500	8500 for all tests of product.
(Cl 8.4)(Minimum Thickness)	-	8500	8500 for all tests of product.
(Cl. 8.5)(Finish)	-	8500	8500 for all tests of product.
(Cl 9.1)(Resistance to Residual Chlorine in Water)	-	8500	8500 for all tests of product.
(Cl 9.2)(Drip Proofness Test)	-	8500	8500 for all tests of product.
(Cl 9.3)(Thermal Shock Test )	-	8500	8500 for all tests of product.
(Cl 9.4)(Hydraulic Pressure Test)	-	8500	8500 for all tests of product.
(Cl 9.5)(Mechanical Strength Characteristics)	-	8500	8500 for all tests of product.
(Cl. 5)(Nominal Size)	-	8500	8500 for all tests of product.
(Cl. 7)(Identification)	-	8500	8500 for all tests of product.
(Cl. 7)(Identification)	-	8500	8500 for all tests of product.
(Cl. 4)(Materials)	-	0	0
(Cl.6 , Table 3)(Dimensions)	-	8500	8500 for all tests of product.
(Cl 8)(Construction,Workmanship and Finish)	-	8500	0
(Cl 8)(Construction,Workmanship and Finish)	-	8500	8500 for all tests of product.
(Cl 8)(Construction,Workmanship and Finish)	-	8500	8500 for all tests of product.
(Cl 8)(Construction,Workmanship and Finish)	-	8500	8500 for all tests of product.
(Cl 8)(Construction,Workmanship and Finish)	-	8500	8500 for all tests of product.
(Cl 8.4)(Minimum Thickness)	-	8500	8500 for all tests of product.
(Cl. 8.5)(Finish)	-	8500	8500 for all tests of product.
(Cl 9.1)(Resistance to Residual Chlorine in Water)	-	8500	8500 for all tests of product.
(Cl 9.2)(Drip Proofness Test)	-	8500	8500 for all tests of product.
(Cl 9.3)(Thermal Shock Test )	-	8500	8500 for all tests of product.
(Cl 9.4)(Hydraulic Pressure Test)	-	8500	8500 for all tests of product.
(Cl 9.5)(Mechanical Strength Characteristics)	-	8500	8500 for all tests of product.

26 Aug, 2027

-
Included w.e.f 05.01.2026

1749

Sleen India Biz venture Private Limited, Agra

9139736

IS 8982 (2019)

Ready mixed paint, finishing, air - Drying for war equipment ? specification (Second Revision)

25300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-4.1 (General)	-	500	-
Clause-4.2(Colours)	-	1000	-
Clause-4.3(Pigment Composition)	-	1000	-
Clause-4.4(Lead Restriction)	-	2000	-
Clause-4.5(Quality of Reagents)	-	500	-
Clause-4.6 Table-1 S.No-1 (i), a)(Consistency)	-	500	-
Clause-4.6 Table-1 S.No-1 (ii)(Application)	-	500	-
Clause-4.6 Table-1 S.No-1 (iii)(Drying time:)	-	500	-
Clause-4.6 Table-1 S.No-1 (iv), a)(Finish)	-	500	-
Clause-4.6 Table-1 S.No-1 (iv), b)(Gloss value, 45° (Specular gloss)	-	1000	-
Clause-4.6 Table-1 S.No-1 (iv), c)(Fineness of grind, micron, Max)	-	1000	-
Clause-4.6 Table-1 S.No-1 (v)(Wet opacity, Min, m2 /10 litre)	-	1000	-
Clause-4.6 Table-1 S.No-1 (vi)(Scratch hardness (1500 g))	-	750	-
Clause-4.6 Table-1 S.No-1 (vii), a)(Flexibility and adhesion)	-	750	-
Clause-4.6 Table-1 S.No-1 (viii)(Protection against corrosion)	-	500	-
Clause-4.6 Table-1 S.No-1 (ix)(Resistance to lubricating oil)	-	500	-
Clause-4.6 Table-1 S.No-1 (x)(Resistance to petrol-benzol mixture)	-	500	-
Clause-4.6 Table-1 S.No-1 (xi)(Resistance to heat (except white))	-	500	-
Clause-4.6 Table-1 S.No-1 (xii)(Water absorption test)	-	500	-
Clause-4.6 Table-1 S.No-1 (xiii)(Resistance to warm water at 45 ± 3°C)	-	500	-
Clause-4.6 Table-1 S.No-1 (xiv)(Resistance to salt water)	-	500	-
Clause-4.6 Table-1 S.No-1 (xv)(Durability)	-	4500	-
Clause-4.6 Table-1 S.No-1 (xvi)(Flash point, °C, Min)	-	1000	-
Clause-4.6 Table-1 S.No-1 (xvii)(Calcium compounds in dry pigments (as CaO), percent by mass, Max)	-	500	-
Clause-4.6 Table-1 S.No-1 (xviii)(Barium compounds in dry pigments (as BaSO4))	-	500	-
Clause-4.6 Table-1 S.No-1 (xix)(Water content (if water suspected to be present))	-	1000	-
Clause-4.6 Table-1 S.No-1 (xx)(Mass in kg/10 litres, Min)	-	500	-
Clause-4.6 Table-1 S.No-1 (xxi)(Accelerated storage stability test)	-	500	-
Clause-4.6 Table-1 S.No-1 (xxii)(Keeping properties, Min)	-	500	-
Clause-5(Packing and Marking )	-	500	-

-
Included w.e.f 06.01.2026

1750

PROMINENT TESTING CENTRE LLP

9189006

IS 1328 (2025)

Veneered Decorative Plywood - Specification ( Fourth Revision )

Grade- MR, BWR, BWP. Type – 1, 2, 3, 4. Formaldehyde Class- E1 & E2

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Grades)	-	200	10% Discount to BIS
Cl 4.2(Type)	-	200	10% Discount to BIS
Cl 4.3(Formaldehyde Class)	-	200	10% Discount to BIS
Cl 5.2(Adhesive)	-	8500	10% Discount to BIS
Cl 7.1(Surface Requirements- For Type 1)	-	200	10% Discount to BIS
Cl 7.2(Surface Requirements- For Type 2)	-	200	10% Discount to BIS
Cl 7.3(Surface Requirements- For Type 3)	-	200	10% Discount to BIS
Cl 7.4(Surface Requirements- For Type 4)	-	200	10% Discount to BIS
Cl 8.1(Dimensions (Length and Width))	-	500	10% Discount to BIS
Cl 8.2(Dimensions (Thickness))	-	500	10% Discount to BIS
Cl 8.3(Squareness and Edge Straightness as Per Annex B)	-	500	10% Discount to BIS
Cl 8.4- Table 1(Tolerances)	-	500	10% Discount to BIS
Cl 11.3(Moisture Content)	-	500	10% Discount to BIS
Cl 11.4.1(a)(Water Resistance Test( For MR Grade))	-	2000	10% Discount to BIS
Cl 11.4.1(b)(Water Resistance Test( For BWR Grade))	-	2000	10% Discount to BIS
Cl 11.4.1(c)(Water Resistance Test( For BWP Grade))	-	2000	10% Discount to BIS
Cl 11.5(Formaldehyde Content Test)	-	4000	10% Discount to BIS
Cl 12(Marking)	-	0	-

27 Oct, 2028

-
Included w.e.f 08.12.2025 Exclusion: Cl 11.6 (Steady - State Formaldehyde Emission Test ( Optional Test))

1751

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 1673 (1984)

Spectfication for mild steel wire, cold heading quality (Second Revision)

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
Cl. 5.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
6(FREEDOM FROM DEFECTS)	-	2000	-
7.1(i)Ultimate Tensile Strength,)	-	2000	-
7.2(ii) Reverse Torsion Test)	-	2000	-
7.3(iii) Crushing Test)	-	2000	-
8( DIMENSIONS AND TOLERANCES)	-	2000	-

08 May, 2028

-
Included w.e.f 31.12.2025

1752

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 1029 (1970)

Specification for hot-rolled steel strip (Baling) (First Revision)

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Sulphur -IS 228 or method specified in relevant ISO standard)	-	2000	-
Cl.4(Phosphorus -IS 228 or method specified in relevant ISO standard)	-	2000	-
5.2(Tensile Test-1608:Part 1)	-	2000	-
5.2(Tensile Strength, Mpa)	-	2000	-
5.2(Elongation, %)	-	2000	-
5.3(Bend Test-1599)	-	1000	-
7.1(Freedom from defects)	-	1000	-
8.2(Width)	-	1000	-
8.2(Thickness)	-	1000	-
9.1(Finishing & Packing)	-	1000	-
10(Marking)	-	0	-

08 May, 2028

-
Included w.e.f 31.12.2025

1753

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 2385 (1977)

Specification for hot - Rolled mild steel sheet and strip in coil form for cold - Reduced tinplate and cold - Reduced blackplate (First Revision)

ALL

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1, 5.2 & Table1(Carbon- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5.1, 5.2 & Table1(Manganese- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5.1, 5.2 & Table1(Sulphur- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5.1, 5.2 & Table1(Phosphorus- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5.1, 5.2 & Table1(Nitrogen- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	500	-
Cl. 5.1, 5.2 & Table1(Aluminium- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-	500	-
6(Freedom from defects)	-	500	-
8(Dimensions and Tolerances)	-	500	-
Cl. 5.1, 5.2(chromium)	-	500	-
Cl. 5.1, 5.2(silicon)	-	500	-
Cl. 5.1, 5.2(copper)	-	500	-
Cl. 5.1, 5.2(aluminium)	-	500	-
Cl. 5.1, 5.2(Nitrogen )	-	500	-
Cl. 5.1, 5.2(Phosphorus)	-	500	-
Cl. 5.1, 5.2(Sulphur)	-	1000	-
Cl. 5.1, 5.2(Manganese)	-	1000	-
Cl. 5.1, 5.2(carbon)	-	1000	-

08 May, 2028

-
Included w.e.f 31.12.2025

1754

PROMINENT TESTING CENTRE LLP

9189006

IS 3087 (2025)

Medium Density Particle Boards of Wood and other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

REG -GRADE-A , REG GRADE-B , MR Grade, HMR Grade

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	200	10% Discount to BIS
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 8, Table 2(Thickness, Sanded/finished panel - IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 8, Table 2(Edge straightness, Max. -IS 2380 (Part 2))	-	200	10% Discount to BIS
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	500	10% Discount to BIS
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	500	10% Discount to BIS
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	500	10% Discount to BIS
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	2000	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	2000	10% Discount to BIS
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	1000	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	1000	10% Discount to BIS
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	1000	10% Discount to BIS
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	1000	10% Discount to BIS
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	1000	10% Discount to BIS
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	4000	10% Discount to BIS

27 Oct, 2028

-
Included w.e.f 08.12.2025 Exclusion: As per Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test))

1755

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 1381 : Part 1 (2003)

Laboratory glassware - Narrow - Necked boiling flasks (Second Revision)

all

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, 4(Type of Flask)	-	1000	-
3.1, 4.1(Series of Nominal Capacity)	-	1000	-
3.2, 4.2(Nominal Capacity )	-	1000	-
3.3, 4.3(Material )	-	1000	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	1000	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	1000	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	1000	-
3.5.2(Neck Length)	-	1000	-
3.5.3, 4.5.2(Dimensions of base )	-	1000	-
3.5.4, 4.5.3(Wall thickness)	-	1000	-
5(Marking )	-	1000	-

-
Included w.e.f 05.01.2026

1756

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 2269 (2006)

Hexagon socket head cap screws (Fifth Revision)

ALL TYPES

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3(Dimensions)	-	5000	-
Cl-4, Table-2(General requirements)	-	20000	-
Cl-4, Table-2(Thread requirements)	-	20000	-
Cl-4, Table-2(Tolerances)	-	20000	-
Cl-4, Table-2(Finish,- Electroplating)	-	20000	-
Cl-4, Table-2(Finish- Non - Electrolytically applied zinc flake coating)	-	20000	-
Cl-4, Table-2(Mechanical Properties)	-	20000	-
Cl-4, Table-2(Surface discontinuities)	-	20000	-
Cl-4, Table-2(Acceptabllity)	-	20000	-

19 Jun, 2028

-
Included w.e.f 26.11.2025

1757

PROMINENT TESTING CENTRE LLP

9189006

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

Type -1,2,3,4,5&6

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3 (Table 1)(b) 6 mm and above)	-	500	10% Discount to BIS
4.1(Flame retardant chemicals)	-	0	-
4.2(Flame retardant and preservative treatment)	-	0	-
4.3(Treatment)	-	0	-
5(PREPARATION FOR TREATMENT)	-	0	-
6.1.1(Treatment of Plywood by Pressure Impregnation after Manufacture)	-	0	-
6.1.2(Soaking Treatment)	-	0	-
6.2(Choice of Treatment)	-	0	-
7(CONDITIONING AFTER TREATMENT)	-	0	-
8.1(Dimensions)	-	500	10% Discount to BIS
8.2(Thickness)	-	500	10% Discount to BIS
8.3, Taable-1 (i)(Tolerance- Length)	-	500	10% Discount to BIS
9(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS
10(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
11 (a)(For flammability)	-	2000	10% Discount to BIS
11 (b)(For flame penetration)	-	2000	10% Discount to BIS
11 (c)(For rate of burning)	-	2000	10% Discount to BIS
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	500	10% Discount to BIS
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	2000	10% Discount to BIS
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	2000	10% Discount to BIS
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	2000	10% Discount to BIS
12.2(Other Tests)	-	3500	10% Discount to BIS
14(Marking)	-	0	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-
Cl-8.3, Table-1 (ii)(Tolerances-Width)	-	500	10% Discount to BIS
Cl-8.3, Table-1 (iii)(Tolerances- Thickness)	-	500	10% Discount to BIS
Cl-8.3, Table-1 (iv)(Edge straightness)	-	500	10% Discount to BIS
Cl-8.3, Table-1 (v)(Squareness,)	-	500	10% Discount to BIS

27 Oct, 2028

-
Included w.e.f 06.01.2026

1758

Advance Electrical Testing And Calibration Lab LLP, Vadodara

7182426

IS 1180 : Part 3 (2021)

Outdoor/Indoor Type Liquid Immersed Distribution Transformers Up to and Including 2 500 kVA, 33 kV — Specification Part 3 Natural/Synthetic Organic Ester Liquid Immersed

upto 2500 kVA, 33 kV

72205 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 a(Measurement of winding resistance [IS 2026 (Part 1)].)	-	785	10 % Discount for BIS
21.2 b(Measurement of voltage ratio and check of phase displacement [IS 2026 (Part 1)].)	-	910	10 % Discount for BIS
21.2 c(Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load [IS 2026 (Part 1)].)	-	7430	10 % Discount for BIS
21.2 d(Measurement of no-load loss and current [IS 2026 (Part 1)].)	-	5950	10 % Discount for BIS
21.2 e(Measurement of insulation resistance [IS 2026 (Part 1)].)	-	570	10 % Discount for BIS
21.2 f(Induced over-voltage withstand test [IS 2026 (Part 3)].)	-	1240	10 % Discount for BIS
21.2 g(Separate-source voltage withstand test [IS 2026 (Part 3)])	-	1240	10 % Discount for BIS
21.5(Pressure and Ester Liquid Leakage Test)	-	5950	10 % Discount for BIS
21.3 b(Temperature-rise test [IS 2026 (Part 2)].)	-	28230	10 % Discount for BIS
21.4 a(Determination of sound levels [IS 2026 (Part 10)];)	-	2600	10 % Discount for BIS
21.4 c(No load current at 112.5 percent voltage (see 6.9.2, 7.9.2, 8.9.2);)	-	1590	10 % Discount for BIS
21.4 e(BDV and Moisture content of liquid in the transformer (IS 16081, IS 16099, IS 16899 or IS 16659, whichever is applicable).)	-	800	10 % Discount for BIS
21.4 d(Paint adhesion test — The test is performed as per ASTM D3359 (Standard Test Methods for measuring adhesion by tape test).)	-	5010	10 % Discount for BIS
6.1 Table 1(Standard Ratings)	-	0	NA
6.2, 7.2, 8.2(Rated Frequency)	-	0	NA
6.3, 7.3(Nominal System Voltage)	-	0	NA
6.4(Table 2 Minimum Basic Insulation Level)	-	0	NA
6.5, 7.5(No-Load Voltage Ratios)	-	0	NA, Already mentioned as above
6.6, 7.6(Winding Connections and Phase Displacement)	-	0	NA, Already mentioned as above
6.7(Tapping Range and Tapping Methods)	-	0	na
6.8(Table 3 Losses and Impedance Values)	-	0	NA, Already mentioned as above
6.9(Permissible Flux Density and Over Fluxing)	-	0	na
6.10(Limits of Temperature-rise)	-	0	NA, Already mentioned as above
7.1(Table 4 Standard Ratings)	-	0	na
7.4(Table 5 Minimum Basic Insulation Level)	-	0	na
7.7(Tapping Ranges and Tapping Methods)	-	0	na
7.8(Losses and Impedance Values)	-	0	NA, Already mentioned as above
7.9(Permissible Flux Density and Overfluxing)	-	0	na
7.10(Limits of Temperature Rise)	-	0	NA, Already mentioned as above
8.1 Table 7(Standard Ratings)	-	0	na
8.3(Nominal System Voltage)	-	0	na
8.5(No Load Voltage Ratio)	-	0	NA
8.6(Number of Phases and Polarity)	-	0	NA
8.4(Table 8 Minimum Basic Insulation Level)	-	0	NA
8.8(Losses and Impedance Values)	-	0	NA, Already mentioned as above
8.9(Permissible Flux Density and Overfluxing)	-	0	NA
8.10(Limits of Temperature Rise)	-	0	NA, Already mentioned as above
9(Standard Materials)	-	0	NA
10(Terminal Arrangement)	-	0	NA
11(Minimum clearances in air)	-	0	NA
12(Connectors (Applicable for bare bushing terminations only))	-	0	NA
13(Marking)	-	0	NA
14(Mounting Arrangement)	-	0	NA
15(Transformer Tank)	-	0	NA
16(Conservator for non-sealed typetransformers)	-	0	NA
18(Efficiency and regulation)	-	0	NA
20(Fittings)	-	0	NA
6.1(Rating)	-	0	NA
6.2(Rated Frequceny)	-	0	NA
6.3(Nominal System Voltage)	-	0	NA
6.4(Basic Insulation Level)	-	0	NA
6.5(No-Load Voltage Ratios)	-	0	NA, Already mentioned as above
6.6(Winding connection and phase displacement)	-	0	NA, Already mentioned as above
6.7(Tapping range and tapping methods)	-	0	NA
6.8(Losses and Impedance Value)	-	0	NA, Already mentioned as above
6.9(Permissible flux density and over fluxing)	-	0	NA
6.10(Limits of temperature-rise)	-	0	NA, Already mentioned as above
7("Technical parameters of three phase distribution transformers higher ")	-	0	NA
8(Technical parameter of single phase distribution transformers)	-	0	NA
10(Terminal Arrangement)	-	0	NA, Already mentioned as above
11(Minimum clearances in air)	-	0	NA
12(Connectors for bare bushing terminations)	-	0	NA
13(Marking)	-	0	NA
15(Trasnformer tank)	-	0	NA
16(Conservator for non-sealed type transformers)	-	0	NA
18(Efficiency and regulations)	-	0	NA
20(Fittings)	-	0	NA
21.2(Routine Tests)	-	0	NA, Already mentioned as above
21.4(Special Test)	-	0	NA, Already mentioned as above
22(Information required with enquiry and order)	-	0	NA
14(Mounting Arrangement)	-	0	NA
21.3 d(Pressure test)	-	0	NA, Already mentioned as above
21.1(General)	-	0	NA
21.3 a(Lightning impulse test [IS 2026 (Part 3)].)	-	75000	GST REMAINS EXTRA

17 Nov, 2027

-
-

1759

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 7173 (2018)

Slotted pan head tapping screws (Second Revision)

ALL TYPES

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions)	-	5000	-
4, table 2(Material)	-	20000	-
4, table 2(General requirements)	-	20000	-
4, table 2(Thread)	-	20000	-
4, table 2(Mechanical properties)	-	20000	-
4, table 2(Tolerances)	-	20000	-
4, table 2(Finish - coating)	-	20000	-
4, table 2(Acceptability)	-	20000	-
5(Designation)	-	5000	-

19 Jun, 2028

-
Included w.e.f 26.11.2025

1760

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 6760 (1972)

Specification for slotted countersunk head wood screws

ALL TYPES

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1, Table 1(Screw No. (Screw Design))	-	1000	-
3.1, Table 1(Diameter of Unthreaded Shank d, Nominal)	-	1000	-
3.1, Table 1(Diameter of Unthreaded Shank d, maximum)	-	1000	-
3.1, Table 1(Diameter of Unthreaded Shank d, Minimum)	-	1000	-
3.1, Table 1(Pitch)	-	1000	-
3.1, Table 1(V*)	-	1000	-
3.1, Table 1(Diameter of Head, D, Maximum)	-	1000	-
3.1, Table 1(Diameter of Head, D, Minimum)	-	1000	-
3.1, Table 1(Depth of Head c†, maximum)	-	1000	-
3.1, Table 1(Depth of Head c†, minimum)	-	1000	-
3.1, Table 1(Width of Slot s, maximum)	-	1000	-
3.1, Table 1(Width of Slot s, minimum)	-	1000	-
3.1, Table 1(Depth Slot n‡, Maximum)	-	1000	-
3.1, Table 1(Depth Slot n‡, Mainimum)	-	1000	-
4.0(Designation)	-	500	-
5.0(General Requirements)	-	500	-

19 Jun, 2028

-
Included w.e.f 26.11.2025

1761

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 18476 (2023)

Fasteners ï¿½ Hexagon Washer Head Drilling Screws with Tapping Screw Thread

ALL TYPES

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 4.0(Dimenssions.)	-	5000	-
Clause. 4.0(Thread size.)	-	5000	-
Clause. 4.0(Length)	-	5000	-
Clause. 5.0(Material)	-	11000	-
Clause. 5.0(Thread)	-	11000	-
Clause. 5.0(Tolerances)	-	11000	-
Clause. 5.0(Mechnical and functional properties.)	-	11000	-
Clause. 5.0(Finish)	-	11000	-
Clause. 5.0(Acceptability)	-	11000	-
Clause.6.0(Designation)	-	1000	-
Clause.6.0(Marking)	-	1000	-

19 Jun, 2028

-
Included w.e.f 26.11.2025

1762

Atckon Laboratories LLP, Bahadurgarh

8186436

IS/ISO 9994 (2018)

Lighters Safety specifications First Revision

All Types

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Flame Generation)	-	500	-
Cl.4.2(Flame Height)	-	1000	-
Cl.4.3(Flame-Height adjustment)	-	1000	-
Cl.4.4(Resistance to spitting or sputtering and flaring)	-	1000	-
Cl.4.5(Flame Extinction)	-	1000	-
Cl.4.6(Volumetric displacement of Fuel)	-	1000	-
Cl.4.7(Mass of Fuel)	-	1000	-
Cl.5.1(External Finish)	-	1000	-
Cl.5.2(Compatibility of Fuel)	-	1000	-
Cl.5.3(Resistance to Fuel Loss)	-	1000	-
Cl.5.4(Resistance to dropping)	-	1000	-
Cl.5.5(Resistance to elevated Temperature)	-	1000	-
Cl.5.6(Resistance to internal Pressure)	-	1000	-
Cl.5.7(Burning Behavior)	-	1000	-
Cl.5.8(Resistance to cyclic burning)	-	1000	-
Cl.5.9(Resistance to Continue Burning)	-	1000	-
6.6, 6.6.3.1(Refilling test-IS/ISO 9994)	-	1000	-
6.6, 6.6.3.2(Refilling test-IS/ISO 9994)	-	1000	-

19 Jun, 2028

-
Included w.e.f 26.11.2025

1763

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 2268 (1994)

Electrical call bells and buzzers for indoor use - Specification (Third Revision)

Electrical call bells and buzzers for indoor use

152500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Rating)	-	200	Complete Charges with EMI/EMC- Rs.1,52,500/- Rs., Complete Charges without EMI/EMC- Rs.27,500/- Rs.
7(Classification)	-	200	Complete Charges with EMI/EMC- Rs.1,52,500/- Rs., Complete Charges without EMI/EMC- Rs.27,500/- Rs.
8(Marking)	-	200	Complete Charges with EMI/EMC- Rs.1,52,500/- Rs., Complete Charges without EMI/EMC- Rs.27,500/- Rs.
9(Safety Requirements)	-	22000	Complete Charges with EMI/EMC- Rs.1,52,500/- Rs., Complete Charges without EMI/EMC- Rs.27,500/- Rs. The EMI/EMC Test facility is available under our other BIS recognized lab.
10(Endurance)	-	900	Complete Charges with EMI/EMC- Rs.1,52,500/- Rs., Complete Charges without EMI/EMC- Rs.27,500/- Rs.
11(Finish)	-	2500	Complete Charges with EMI/EMC- Rs.1,52,500/- Rs., Complete Charges without EMI/EMC- Rs.27,500/- Rs.
12(Operation at Over Voltages and Under Voltage)	-	1500	Complete Charges with EMI/EMC- Rs.1,52,500/- Rs., Complete Charges without EMI/EMC- Rs.27,500/- Rs.

31 Dec, 2026

-
included w.e.f 09-12-2025.

1764

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Carbon %)	-	3000	-
4.1(Manganese %)	-	3000	-
4.1(Phosphorus %)	-	3000	-
4.1(Sulphur %)	-	3000	-
4.1(Silicon %)	-	3000	-
4.1( Copper %)	-	3000	-
4.1(Cr)	-	3000	-
4.1(Mo)	-	3000	-
4.1(Ni)	-	3000	-
4.1( Nitrogen%)	-	3000	-
4.1(CE)	-	3000	-
4.1(Sulphur and phosphorous)	-	3000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	3000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	3000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	3000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	3000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	3000	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3000	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3000	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3000	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3000	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3000	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	3000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	3000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	3000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	3000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	3000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	3000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	3000	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	500	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	1000	-
Cl 6.1(Length, Width & Thickness)	-	500	-
Cl 7.2(Weight)	-	500	-
Cl 9.4(Load In Other Direction From Bend)	-	3000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	4000	-
Cl. 8.1 Table 3(TS/YS ratio)	-	4000	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	4000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	4000	-
Cl 9.3(Load In One Direction)	-	3000	-
Cl. 9.3, Table 4(Bend Test )	-	2500	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	3000	-
5.7(PullOut (Bond Test))	-	5000	-

-
-

1765

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 10773 (1995)

Wrought copper tubes for refrigeration and air - Conditioning purposes - Specification (First Revision)

Wrought copper tubes for refrigeration and air

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Freedom from defect)	-	200	-
8(Dimension and Tolerance)	-	200	-
9.1 - 1(Copper)	-	450	-
9.1 - 1(Arsenic)	-	450	-
9.1 - 1(Iron)	-	450	-
9.1 - 1(Lead)	-	450	-
9.1 - 1(Nickel)	-	450	-
9.1 - 1(Tin)	-	450	-
9.1 - 1(Phosphorus)	-	450	-
9.1 - 1(Total impurities)	-	500	-
9.1 - 1(Manganese)	-	450	-
9.1 - 1(Aluminium)	-	450	-
9.1 - 1(Zinc)	-	450	-
10.1.1 - 2(Tensile Test)	-	425	-
10.1.1 - 2(0.2 Proof stress)	-	425	-
10.1.1 - 2(Percentage elongation on 50mm gauge length)	-	450	-
10.2(Flattening Test)	-	450	-
10.3(Drift Expanding Test)	-	450	-
10.4.2(Hydrostatic Test)	-	450	-
10.4.3(Pneumatic Test)	-	450	-
10.5(Microscopic Examination)	-	2000	-
10.6(Hydrogen Embrittlement Test)	-	3500	-
11.1(Residue Test Or cleanliness test)	-	0	-
Cl-11.2(Residue Test Or cleanliness test)	-	0	-

-
-

1766

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

ALL

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
6(Freedom From Defects)	-	500	-
9.3(Tensile Test-1608:Part 1)	-	500	-
9.3, Table 3 (Yield Strength, Mpa)	-	500	-
9.3, Table 3 (Tensile Strength, Mpa)	-	500	-
9.3, Table 3 (Elongation, %)	-	500	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	500	-
11(Surface finish)	-	500	-
12(Dimensions)	-	500	-
14.1(Thickness,mm)	-	500	-
14.2( Width, mm)	-	500	-
14.3(Length, mm)	-	500	-
14.4(Flatness, mm)	-	0	-
14.5(Camber, mm)	-	0	-
Clause 9.1, 9.2 & Table 3(IS 1608 Part 1)	-	0	-
17(Marking)	-	0	-
Clause 9.1, 9.2 & Table 3(0.2 Percent Yield Strength)	-	0	-
4.1(General requirements)	-	0	-
6(Freedom from defects)	-	0	-
7(Heat treatment)	-	0	-
8.1, table 1(C Si Mn Ni Cr S P Cu Ni)	-	0	-
8.1.1, table 2(Carbon Silicon Manganese Nickel Chromium Sulphur Phosphorus Copper Nitrogen)	-	0	-
9.1(Sample plan)	-	0	-
9.2(Tensile test)	-	0	-
9.3(Mechanical properties)	-	0	-
9.4(Erichsen cupping test)	-	0	-
10(Retests)	-	0	-
11(Surface finish)	-	0	-
12(Dimensions)	-	0	-
13(Edge condition)	-	0	-
14.1(Thickness)	-	0	-
14.2.1(Mill Edge)	-	0	-
14.2.2(Trimmed Edge)	-	0	-
14.3(Length)	-	0	-
14.4(Flatness)	-	0	-
14.5(Camber)	-	0	-
15(Inspection)	-	0	-
17(Marking)	-	0	-

08 May, 2028

-
Included w.e.f 31.12.2025

1767

ADS LABTECH, GHAZIABAD

8178326

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

Wrought Aluminium and Aluminium Alloys — Extruded Round Tube and Hollow Sections

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
6(FREEDOM FROM DEFECTS)	-	500	-
Cl. 9(Aluminium)	-	500	-
Cl. 9(Copper)	-	500	-
Cl. 9(Magnesium)	-	500	-
Cl. 9(Silicon)	-	500	-
Cl. 9(Iron)	-	500	-
Cl. 9(Manganese)	-	500	-
Cl. 9(Zinc)	-	500	-
Cl. 9(Titanium and/or other grain refining elements)	-	500	-
Cl. 9(Chromium)	-	500	-
Cl. 9(Ti+V)	-	500	-
Cl. 9(Cr+Mn)	-	500	-
Clause-10(Tensile strength)	-	500	-
8(DIMENSIONS AND TOLERANCES)	-	500	-
10(MECHANICAL PROPERTIES)	-	500	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	-	-
6(FREEDOM FROM DEFECTS)	-	-	-
Cl. 9(Aluminium)	-	-	-
Cl. 9(Copper)	-	-	-
Cl. 9(Magnesium)	-	-	-
Cl. 9(Silicon)	-	-	-
Cl. 9(Iron)	-	-	-
Cl. 9(Manganese)	-	-	-
Cl. 9(Zinc)	-	-	-
Cl. 9(Titanium and/or other grain refining elements)	-	-	-
Cl. 9(Chromium)	-	-	-
Cl. 9(Ti+V)	-	-	-
Cl. 9(Cr+Mn)	-	-	-
Clause-10(Tensile strength)	-	-	-
8(DIMENSIONS AND TOLERANCES)	-	-	-
10(MECHANICAL PROPERTIES)	-	-	-

15 May, 2027

-
Included w.e.f. 06.02.2026

1768

CIPET, Lucknow

9102534

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

11113 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Colour of fittings)	-	500	NIL
7.1,Table 1(Wall thickness)	-	500	NIL
7.2 ,Table 2&3(Socket Dimensions)	-	0	NIL
10(Workmanship)	-	500	NIL
11(Design requirements)	-	500	NIL
12.1(Visual appearance)	-	500	NIL
12.2(Stress relief test)	-	700	NIL
12.3(Vicat softening tempewrature)	-	1100	NIL
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	NIL
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1200	NIL
Cl.15, Annex B(Sulphated Ash Content)	-	1200	NIL
16.1(Impact test)	-	1100	NIL
17(Watet tightness of joint)	-	850	NIL
12.4(Effect on water test)	-	3000	NIL

31 Dec, 2026

-
-

1769

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

All

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	500	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	1500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	1500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	1500	-
6.1(Carbon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1(Silicon %)	-	1000	-
6.1( Copper %)	-	1000	-
6.1( Aluminium %)	-	1000	-
6.1( Nb)	-	1000	-
6.1(V)	-	1000	-
6.1( Ti)	-	1000	-
6.1(Boron)	-	1000	-
6.1( Nitrogen%)	-	1000	-
6.1(Microalloying)	-	1000	-
6.1(Carbon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1(Silicon %)	-	1000	-
6.1( Copper %)	-	1000	-
6.1( Aluminium %)	-	1000	-
6.1( Nb)	-	1000	-
6.1(V)	-	1000	-
6.1( Ti)	-	1000	-
6.1(Boron)	-	1000	-
6.1( Nitrogen%)	-	1000	-
6.1(Microalloying)	-	1000	-
6.1(Carbon %)	-	1000	-
6.1(Manganese %)	-	1000	-
6.1(Phosphorus %)	-	1000	-
6.1(Sulphur %)	-	1000	-
6.1(Silicon %)	-	1000	-
6.1( Copper %)	-	1000	-
6.1( Aluminium %)	-	1000	-
6.1( Nb)	-	1000	-
6.1(V)	-	1000	-
6.1( Ti)	-	1000	-
6.1(Boron)	-	1000	-
6.1( Nitrogen%)	-	1000	-
6.1(Microalloying)	-	1000	-
Cl. 10(Weight)	-	300	-
Cl. 9.3(Crown)	-	300	-
Cl.9.3.1(Difference in Thickness)	-	300	-
Cl. 9.5(Edge Camber)	-	300	-
Cl.9(Thickness)	-	300	-
Cl.9(Width)	-	300	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	1500	-
Cl 8(Workmanship)	-	500	-
Cl 8(Workmanship)	-	500	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width)	-	1500	-
12(Marking)	-	500	-

27 May, 2028

-
included w.e.f 22.01.2026

1770

CIPET, Lucknow

9102534

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

23325 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 - 5.24.2( Reasonably foreseeable abuse -Drop Test)	-	1100	-
4.2 - 5.24.3( Reasonably foreseeable abuse -Tip-over test for large and bulky toys)	-	500	-
4.2 - 5.24.4( Reasonably foreseeable abuse -Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	1100	-
4.2 - 5.24.5( Reasonably foreseeable abuse -Torque test)	-	500	-
4.2 - 5.24.6.2( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys)	-	500	-
4.2 - 5.24.6.3( Reasonably foreseeable abuse -Tension test for pompoms)	-	500	-
4.2 - 5.24.6.4( Reasonably foreseeable abuse -Tension test for protective components)	-	500	-
4.2 - 5.24.6.5( Reasonably foreseeable abuse -Tension test for a projectile with a suction cup)	-	500	-
4.2 - 5.24.7( Reasonably foreseeable abuse -Compression test)	-	500	-
4.2 - 5.24.8.2( Reasonably foreseeable abuse-Flexure test-Wires and other metallic components intended to be bent)	-	500	-
4.2 - 5.24.8.3( Reasonably foreseeable abuse -Flexure test-Wires likely to be bent)	-	500	-
4.3.2 - 5.21( Expanding materials)	-	1200	-
4.4.1 - 5.2(Small parts-For children under 36 months)	-	500	-
4.4.2 - 5.2(Small parts-For children 36 months and over but under 72 months )	-	500	-
4.5.1.2 - 5.3(Shape, size and strength of certain toys-Squeeze toys, rattles, and certain other toys and components of toys-Test for shape and size of certain toys)	-	500	-
4.5.1.3 - 5.3(Shape, size and strength of certain toys-Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months-Test for shape and size of certain toys)	-	500	-
4.5.1.4 - 5.3(Shape, size and strength of certain toys-Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months-Test for shape and size of certain toys)	-	500	-
4.5.2 - 5.4(Shape, size and strength of certain toys-Small balls-Small balls test)	-	500	-
4.5.3 - 5.5(Shape, size and strength of certain toys-Pompoms-Test for pompoms)	-	500	-
4.5.4 - 5.6(Shape, size and strength of certain toys- Pre-school play figures-Test for pre-school play figures)	-	500	-
4.5.5(Shape, size and strength of certain toys-Toy pacifiers-Nipple length)	-	500	-
4.5.6(Shape, size and strength of certain toys-Balloons)	-	500	-
4.5.7(Shape, size and strength of certain toys-Marbles)	-	500	-
4.5.8 - a(Shape, size and strength of certain toys-Hemispheric-shaped toys-No of Opening)	-	500	-
4.6.1 a - 5.8(Edges-Accessible sharp edges of glass or metal-Sharp edge test)	-	500	-
4.6.2(Edges-Functional sharp edges)	-	500	-
4.6.3 - 5.8(Edges-Edges on metal toys-Sharp edge test)	-	500	-
4.6.4( Edges-Edges on moulded toys)	-	500	-
4.7.1 - 5.9(Points-Accessible sharp points-sharp-point test)	-	500	-
4.8.1(Projections-General requirments)	-	500	-
4.9(a) - 5.24.8.2( Metal wires and rods-wires and other metallic components intended to be bent)	-	500	-
4.9 - c - 5.8( Metal wires and rods-Sharp edge test)	-	500	-
4.9 - c - 5.9( Metal wires and rods-Sharp Point test)	-	500	-
4.9 - c( Metal wires and rods-Minimum dia of spokes)	-	500	-
4.10(a) - 5.10(Plastic film or plastic bags in packaging and in toys-average thickness)	-	500	-
4.11.2.1(a) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	500	-
4.11.2.1(b) - 5.11.3( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-breakaway feature separation test)	-	500	-
4.11.2.1(b) - 5.11.2( Cords-Cords in toys intended for children under 18 months-Cords with the potential to tangle-Length of cords and electrical cables after breakaway feature separation test)	-	500	-
4.11.2.2 - 5.11.2( Cords-Cords in toys intended for children under 18 months--Other cords-free length )	-	500	-
4.11.3.1(a) - 5.11.2( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-Length of cords and electrical cables)	-	500	-
4.11.3.1(b) - 5.11.3( Cords-Cords in toys intended for children 18 months and over but under 36 months-Cords with the potential to tangle-breakaway feature separation test)	-	500	-
4.11.3.3 ( Cords-Cords in toys intended for children 18 months and over but under 36 months-Other cords without a free end )	-	500	-
4.11.4(a) - 5.11.4.1(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Head probe push test)	-	500	-
4.11.4(a) - 5.11.4.2(Cords-Fixed loops and nooses intended for children under 36 months-Test for fixed loops and nooses-Elastic materials)	-	500	-
4.11.4(b) - 5.11.3(Cords-Fixed loops and nooses intended for children under 36 months-Breakaway feature separation test)	-	500	-
4.11.5 - 5.11.2(Cords-Cords on pull toys-free length)	-	500	-
4.11.7 - 5.11.1(Cords- Diameter of certain cords intended for children under 36 months-cords cross-sectional dimension)	-	500	-
4.11.8 - 5.11.5(Cords- Self-retracting cords intended for children under 36 months-self-retracting cords)	-	500	-
4.11.11( Cords, strings and lines for flying toys- )	-	1100	-
4.12.1(a - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.1(b - 1)(Folding mechanisms-Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.2 (a) - 5.22.3(Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.12.2 (b)(Folding mechanisms-Other toys with folding mechanisms)	-	500	-
4.12.3(Folding mechanisms-Hinge line clearance)	-	500	-
4.13.1(Holes, clearances and accessibility of mechanisms-Circular holes in rigid materials)	-	500	-
4.13.2 (Holes, clearances and accessibility of mechanisms-Accessible clearances for movable segments)	-	500	-
4.13.3(Holes, clearances and accessibility of mechanisms- Chains or belts in ride-on toys)	-	500	-
4.13.4(Holes, clearances and accessibility of mechanisms-Other driving mechanisms)	-	500	-
4.13.5(Holes, clearances and accessibility of mechanisms-Winding keys)	-	500	-
4.14(a)(Springs)	-	500	-
4.15.1.1 - 5.12.2( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet available for stabilization)	-	500	-
4.15.1.2 - 5.12.3( Stability and overload requirements-Stability of ride-on toys and seats-Sideways stability, feet unavailable for stabilization)	-	500	-
4.15.1.3 - 5.12.4( Stability and overload requirements-Stability of ride-on toys and seats-Fore and aft stability Test)	-	500	-
4.15.2 - 5.12.5( Stability and overload requirements-Overload requirements for ride-on toys and seats-overload test for ride-on toys and seats)	-	500	-
4.15.2 - 5.24.4( Stability and overload requirements-Overload requirements for ride-on toys and seats-dynamic strength test for wheeled ride-on toys other than toy scooters)	-	500	-
4.15.3 - 5.12.6( Stability and overload requirements-Stability of stationary floor toy-Stability test of stationary floor toys)	-	500	-
4.16.1(Enclosures-Ventilation)	-	500	-
4.16.2.1(Enclosures-Closures-Lids, doors and similar devices)	-	500	-
4.16.2.1 - 5.13.1(Enclosures-Closures-Lids, doors and similar devices-Test For closures)	-	500	-
4.16.2.2(a) - 5.13.2.1(Enclosures-Closures-Lid support for toy chests and similar toys-Test For lid support)	-	1500	-
4.16.2.2(a) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys- After durability test for toy chest lids)	-	1500	-
4.16.2.2(b) - 5.13.2.2(Enclosures-Closures-Lid support for toy chests and similar toys-durability test for toy chest lids)	-	1500	-
4.16.2.2(c) - 5.13.2.2 - 4.12.3(Enclosures-Closures-Lid support for toy chests and similar toys-Folding mechanisms-Hinge line clearance)	-	1500	-
4.16.2.2(d)(Enclosures-Closures-Lid support for toy chests and similar toys)	-	1500	-
4.16.3(Enclosures-Toys that enclose the head)	-	500	-
4.17 - 5.14(Simulated protective equipment, such as helmets, hats and goggles-Impact test for toys that cover the face)	-	500	-
4.18.2(a) - 5.36(Projectile toys-Projectiles-tip assessment of rigid projectiles)	-	500	-
4.18.2(d) - 5.37(Projectile toys-Projectiles-length of suction cup projectiles)	-	500	-
4.18.2(d) - 5.37 - 5.24.5(Projectile toys-Projectiles-length of suction cup projectiles After torque test)	-	500	-
4.18.2(d) - 5.37 - 5.24.6.5(Projectile toys-Projectiles-length of suction cup projectiles After tension test for a projectile with a suction cup)	-	500	-
4.18.2 - e - 5.24.5(Projectile toys-Projectiles-torque test)	-	500	-
4.18.2 - e - 5.24.6.5(Projectile toys-Projectiles-tension test for a projectile with a suction cup)	-	500	-
4.18.3(a) - 5.2(Projectile toys-Projectile toys with stored energy-small parts test)	-	500	-
4.18.3(a) - 5.4(Projectile toys-Projectile toys with stored energy--small parts test after (wall impact test for projectiles)	-	500	-
4.18.3(b) - 5.15.1.3.3(Projectile toys-Projectile toys with stored energy-determination of kinetic energy per area of contact)	-	500	-
4.18.3(d) - 5.15.2(Projectile toys-Projectile toys with stored energy-Wall impact test for projectiles)	-	500	-
4.18.4.1 - 5.20(Projectile toys-Projectile toys without stored energy-Mouth-actuated projectile toys-durability of mouth-actuated toys)	-	500	-
4.18.4.2(a) - 5.15.1.3.3(Projectile toys-Projectile toys without stored energy-Projectiles in the form of a dart-determination of the kinetic energy per area of contact when the contact area of the dart shall be at least 3 cm^2)	-	500	-
4.19(Rotors and propellers)	-	500	-
4.2(Aquatic toys)	-	500	-
4.21(a)(Braking-brake performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	500	-
4.22.3 - 5.16.1(Toy bicycles-Braking requirements-determination of free-wheeling facility)	-	500	-
4.22.3 - 5.16.3(Toy bicycles-Braking requirements- brake performance for toy bicycles)	-	500	-
4.23 - 5.17(Speed limitation of electrically driven ride-on toys-determination of speed of electrically driven ride-on toys)	-	500	-
4.24(a) - 5.18(Toys containing a heat source-determination of temperature increases)	-	500	-
4.25 - 5.19(Liquid-filled toys-leakage of liquid-filled toys)	-	500	-
4.26(a) - 5.2( Mouth-actuated toys-small parts test)	-	500	-
4.26(b) - 5.24.5 - 5.3( Mouth-actuated toys-small parts test after torque test)	-	500	-
4.26(b) - 5.24.6.1 - 5.4( Mouth-actuated toys-small parts test after tension test, general procedure)	-	500	-
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	500	-
4.28( Percussion caps specifically designed for use in toys)	-	500	-
4.29(a) - 5.25(Acoustic requirements-determination of sound pressure levels)	-	1100	-
4.26(c ) - 5.20 - 5.2( Mouth-actuated toys-small parts test after durability of mouth-actuated toys)	-	500	-
4.30.3 - 5.26(Toy scooters-Strength-static strength for toy scooters)	-	500	-
4.30.3 - 5.27(Toy scooters-Strength-dynamic strength for toy scooters)	-	500	-
4.30.3 - 5.29(Toy scooters-Strength-strength of toy scooter steering tubes)	-	500	-
4.30.4 - 5.12.2(Toy scooters-Stability-sideways stability test, feet available for stabilization)	-	500	-
4.30.5(a)( Toy scooters-Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.5(f) - 5.30( Toy scooters-Adjustable and folding steering tubes and handlebars-resistance to separation of handlebar)	-	500	-
4.30.6 - 5.28( Toy scooters-Braking- force required to hold the toy)	-	500	-
4.31.1 - 5.32(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-magnetic flux index)	-	500	-
4.31.1 - 5.2(Magnets and magnetic components-Magnetic/electrical experimental sets intended for children 8 years and over-small parts test)	-	500	-
4.31.2(b) - 5.34 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-soaking test for magnets-small parts test)	-	500	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.32(Magnets and magnetic components-All other toys with magnets and magnetic components-magnetic flux index After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	500	-
4.31.2(c ) - 5.31 - 5.24.2 - 5.24.3 - 5.24.5 - 5.24.6.1 - 5.24.6.2 - 5.33 - 5.31 - 5.2(Magnets and magnetic components-All other toys with magnets and magnetic components-small parts test After Following tests: -tension test for magnets; -drop test/tip over test for large and bulky toys; -torque test; -tension test, general procedure; -tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys, if applicable; -impact test for magnets; -compression test; -tension test for magnets;)	-	500	-
4.32 - 5.38.2( Yo-yo balls - length (lo) of the yo-yo ball tether)	-	500	-
4.32 - 5.38.1( Yo-yo balls - The ratio of the mass m (in grams) to the elastic constant k of the yo-yo ball tether(m/k))	-	500	-
4.33 - 5.11.3(Straps intended to be worn fully or partially around the neck-breakaway feature separation test)	-	500	-
4.35.3 - 5.39(Jaw entrapment in handles and steering wheels-jaw entrapment test)	-	500	-
4.34(Sledges and toboggans with cords for pulling)	-	500	-
4.1(General)	-	500	-
4.3.1(Material quality)	-	500	-

31 Dec, 2026

-
Included w.e.f. 06.10.2025 Testing facility available for limited parameters only (as mentioned in the "view Breakup" under testing charges)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number