BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

1801

Lauritz Knudsen Switchgear Testing Laboratories, MSW, SEIPL, Mumbai

7177626

IS 12640 : Part 1 (2024)

Residual current operated circuitBreakers without integral overcurrent protection for household and similar uses Rccbs: Part 1 general rules (Third Revision)

514500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	500	-
8.1.1(General)	-	500	-
8.1.2(Mechanism)	-	1500	-
9.3(Indelibility of marking)	-	1000	-
8.1.3(Clearance and creepage distance (External parts only))	-	1500	-
9.15(Trip free mechanism)	-	3500	-
9.4(Reliability of screws, current-carrying parts and connections)	-	4000	-
9.5(Reliability of terminals for external conductors)	-	4000	-
9.6(Protection againts electrci shock)	-	3000	-
9.13(Resistance to heat)	-	2500	-
8.1.3(Clearance and creepage distance (Internal parts only))	-	1500	-
9.25(Resistance to rusting)	-	3000	-
9.14(Resistance to abnormal heat and to fire)	-	15000	-
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	10000	-
9.7.7.5(Verification of the behaviour of components bridging the basic insulation)	-	10000	-
9.7.1(Resistance to humidity)	-	15000	-
9.7.2(Insulation resistance of the main circuit)	-	7500	-
9.7.3(Dielectric strength of the main circuit)	-	5000	-
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	7500	-
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	10000	-
9.7.5(Secondary circuit of detection transformers)	-	10000	-
9.7.6(Capability of control circuits connected to the main circuits etc.)	-	10000	-
9.8(Temperature-rise)	-	15000	-
9.22.2(Reliability at 40 °C)	-	35000	-
9.23(Ageing of electronic components)	-	20000	-
9.10(Mechanical and electrical endurance)	-	40000	-
9.9(Residual operating characteristics)	-	80000	-
9.17(Behaviour in the case of failure of the line voltage)	-	5000	-
9.19(Unwanted tripping Behaviour in the case of surge currents)	-	0	Test facility not available
9.21(DC components)	-	0	Test facility not available, not in NABL Scope
9.11.2.3a)b)(Perf ormance at IΔm)	-	49000	-
9.16(Test device)	-	1000	-
9.12(Resistance to mechanical shock and impact)	-	10000	-
9.18(Non-operating current under overcurrent conditions)	-	10000	-
9.11.2.3c)(Verification of the suitability of RCCBs for use in IT-systems)	-	49000	-
9.11.2.4 a)(Coordination at Inc)	-	49000	-
9.11.2.4 c)(Performance at Im)	-	49000	-
9.11.2.4 b)(Coordination at Im)	-	49000	-
9.11.2.2(Coordination at IΔc)	-	49000	-
9.22.1(Reliability (climatic test))	-	70000	-
IEC 615432 , Table 4 -T1.1(Harmonics, inter harmonics)	-	0	Test facility not available, not in NABL scope
IEC 61543, Table 4 -T1.2(Signalling voltages)	-	0	Test facility not available
IEC 61543, Table 5 –T2.3(Surges)	-	50000	Test available, not in NABL Scope
IEC 61543, Table 5 -T2.1(Conducted s ine-wave form voltages or c urrents)	-	0	Test facility not available
IEC 61543, Table 5 -T2.1(Conducted s ine-wave form voltages or c urrents)	-	0	Test facility not available
IEC 61543, Table 5 -T2.5(Radiated electromagnetic field)	-	0	Test facility not available, not in NABL scope
IEC 61543, Table 5 -T2.2(Fast transients (bursts))	-	20000	Test facility available, not in NABL Scope
IEC 61543, Table 5 – T2.6(Conducted common mode disturbances in the frequency range lower than 150 kHz)	-	0	Test facility not available, not in NABL scope
IEC 61543, Table 6 -T3.1(Electrostatic discharges)	-	20000	Test facility available, not in NABL Scope
6(Marking)	-	500	-
8.1.1(General)	-	500	-
8.1.2(Mechanism)	-	1500	-
9.3(Indelibility of marking)	-	1000	-
8.1.3(Clearance and creepage distance (External parts only))	-	1500	-
9.15(Trip free mechanism)	-	3500	-
9.4(Reliability of screws, current-carrying parts and connections)	-	4000	-
9.5(Reliability of terminals for external conductors)	-	4000	-
9.6(Protection againts electrci shock)	-	3000	-
9.13(Resistance to heat)	-	2500	-
8.1.3(Clearance and creepage distance (Internal parts only))	-	1500	-
9.25(Resistance to rusting)	-	3000	-
9.14(Resistance to abnormal heat and to fire)	-	15000	-
9.7.7.4(Resistance of the insulation of open contacts and basic insulation against an impulse voltage in normal conditions)	-	10000	-
9.7.7.5(Verification of the behaviour of components bridging the basic insulation)	-	10000	-
9.7.1(Resistance to humidity)	-	15000	-
9.7.2(Insulation resistance of the main circuit)	-	7500	-
9.7.3(Dielectric strength of the main circuit)	-	5000	-
9.7.4(Insulation resistance and dielectric strength of auxiliary circuits)	-	7500	-
9.7.7.2(Verification of clearances with the impulse withstand voltage)	-	10000	-
9.7.5(Secondary circuit of detection transformers)	-	10000	-
9.7.6(Capability of control circuits connected to the main circuits etc.)	-	10000	-
9.8(Temperature-rise)	-	15000	-
9.22.2(Reliability at 40 °C)	-	35000	-
9.23(Ageing of electronic components)	-	20000	-
9.10(Mechanical and electrical endurance)	-	40000	-
9.9(Residual operating characteristics)	-	80000	-
9.17(Behaviour in the case of failure of the line voltage)	-	5000	-
9.19(Unwanted tripping Behaviour in the case of surge currents)	-	0	Test Facility Not Available
9.21(DC components)	-	0	Test Facility Not Available
9.11.2.3a)b)(Perf ormance at IΔm)	-	49000	-
9.16(Test device)	-	1000	-
9.12(Resistance to mechanical shock and impact)	-	10000	-
9.18(Non-operating current under overcurrent conditions)	-	10000	-
9.11.2.3c)(Verification of the suitability of RCCBs for use in IT-systems)	-	49000	-
9.11.2.4 a)(Coordination at Inc)	-	49000	-
9.11.2.4 c)(Performance at Im)	-	49000	-
9.11.2.4 b)(Coordination at Im)	-	49000	-
9.11.2.2(Coordination at IΔc)	-	49000	-
9.22.1(Reliability (climatic test))	-	70000	-
IEC 615432 , Table 4 -T1.1(Harmonics, inter harmonics)	-	0	49000
IEC 61543, Table 4 -T1.2(Signalling voltages)	-	0	-
IEC 61543, Table 5 –T2.3(Surges)	-	50000	Test Facility , not in NABL Scope
IEC 61543, Table 5 -T2.1(Conducted s ine-wave form voltages or c urrents)	-	0	Test Facility Not Available
IEC 61543, Table 5 -T2.1(Conducted s ine-wave form voltages or c urrents)	-	0	Test Facility Not Available
IEC 61543, Table 5 -T2.5(Radiated electromagnetic field)	-	0	Test Facility Not Available
IEC 61543, Table 5 -T2.2(Fast transients (bursts))	-	20000	Test Facility available , not in NABL Scope
IEC 61543, Table 5 – T2.6(Conducted common mode disturbances in the frequency range lower than 150 kHz)	-	0	Test Facility Not available
IEC 61543, Table 6 -T3.1(Electrostatic discharges)	-	20000	Not in NABL Scope

11 Apr, 2027

-
1 9.19 (Unwanted tripping Behaviour in the case of surge currents) Unwanted tripping Behavior in the case of surge currents Test Facility not available. 2 9.21 (DC components) DC Components Test Facility not available. 3 IEC 615432 , Table 4 -T1.1 (Harmonics, inter harmonics) Harmonics , Inter Harmonics Test Facility not available. 4 IEC 61543, Table 4 -T1.2 (Signalling voltages) Signaling Voltages Test Facility not available. 5 IEC 61543, Table 5 -T2.1 (Conducted s ine-wave form voltages or c urrents) Conducted sine-wave form voltages or currents Test Facility not available. 6 IEC 61543, Table 5 -T2.1 (Conducted s ine-wave form voltages or c urrents) Conducted sine-wave form voltages or currents Test Facility not available. 7 IEC 61543, Table 5 -T2.5 (Radiated electromagnetic field) Radiated Electromagnetic Field Test Facility not available. 8 IEC 61543, Table 5 – T2.6 (Conducted common mode disturbances in the frequency range lower than 150 kHz) Conducted Common mode disturbances in the frequency range lower than 150 kHz Test Facility not available.

1802

Sleen India Biz venture Private Limited, Agra

9139736

IS 133 (2013)

ENAMEL, INTERIOR : (A) UNDERCOATING (B) FINISHING

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1()	-	500	-
5.4(IS 101 (Part 1/Sec 2))	-	500	-
5.5()	-	500	-
5.6()	-	500	-
5.7(IS 133Annex B.)	-	1000	-
5.8(IS 101 (Part 8/Sec 5).)	-	2500	-
Table 1 Cl No 5.9,i(IS 101 part 3 sec 1)	-	1000	-
Table 1 Cl No 5.9,i(IS 101 part 3 sec 2)	-	1000	-
Table 1 Cl No 5.9,i(IS 101 part 3 sec 3)	-	1000	-
Table 1 5.9,ii(IS 101 Part l/Sec 7)	-	1000	-
Table 1 5.9,iii(Part 1/Sec 5)	-	1500	-
Table 1 5.9, iv((Part 3/Sec 4))	-	500	-
Table 1 5.9, iv(Part 4/Sec 4)	-	1000	-
Table 1 5.9,v(Part 3/Sec 5)	-	1000	-
Table 1 5.9,vi(Qualitative IS 5)	-	500	-
Table 1 5.9,vii(Part 4/Sec 1)	-	1000	-
Table 1 Cl No 5.9 Vii(Part 4/Sec 3)	-	2000	-
Table 1 5.9,ix(IS 133Annex E.)	-	1000	-
Table 1 5.9,x(3 of (Part 5/Sec 2))	-	1000	-
Table 1 5.9,x(2 of (Part 5/Sec 2))	-	1000	-
Table 1 5.9,x(2 of (Part 5/Sec 2))	-	0	-
Table 1 5.9,xi((Part 1/Sec 6))	-	1000	-
Table 1 5.9,xii((Part 8/Sec 6)	-	1000	-
Table 1 5.9,xiii(IS 133Annex F.)	-	500	-
Table 1 5.9,xiv(Part 6/Sec 2)	-	500	-

-
Included w.e.f 16.12.2025

1803

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 14587 (2025)

Prelaminated Medium Density Fibre Boards of Wood and Other Lignocellulosic Materials - Specification ( Second Revision )

REG,MR.HMR-GP,FN/Type-1,2,3,4/Class-E1,E2/All Size

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 8 Table 2(Length -IS 2380 (Part 2))	-	600	-
As per Clause 8 Table 2(Width - IS 2380 (Part 2))	-	600	-
As per Clause 8 Table 2(Thickness - IS 2380 (Part 2))	-	600	-
As per Clause 8 Table 2(Squareness, Max -IS 2380 (Part 2))	-	600	-
As per Clause 8 Table 2(Edge Straighness, Max - IS 2380 (Part 2))	-	600	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	600	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	600	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	600	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	700	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	700	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	700	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	700	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	700	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	700	-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	600	-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	600	-
As per Clause 9.1 , Table 8(Abrasion resistance in number of revolutions Min. --Annex. B)	-	600	-
As per Clause 9.1 , Table 8(Resiatnce to stream/water vapour - Annex. C)	-	600	-
As per Clause 9.1 , Table 8(Resitance to crack -Annex. D)	-	600	-
As per Clause 9.1 , Table 8(Resistance to cigarette burn -Annex. E)	-	600	-
As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F)	-	600	-
As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F)	-	600	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	600	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	600	-

23 May, 2028

-
Included w.e.f 18.12.2025

1804

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 3087 (2025)

Medium Density Particle Boards of Wood and other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

REG,MR,HMR/E1,E2/All Size

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	800	-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	900	-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	900	-
As per Clause 8, Table 2(Thickness, Sanded/finished panel - IS 2380 (Part 2))	-	900	-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	900	-
As per Clause 8, Table 2(Edge straightness, Max. -IS 2380 (Part 2))	-	900	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	900	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	900	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	900	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	900	-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	900	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	900	-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	900	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	900	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	900	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	900	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	900	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	900	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	900	-

23 May, 2028

-
Included w.e.f 18.12.2025

1805

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 12406 (2025)

Medium Density Fibre Boards of Wood and Other Lignocellulosic Materials for General Purpose - Specification ( Third Revision )

REG,MR,HMR,GP,FN/Class-E1,E2/All Size

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual)	-	500	-
As per Clause 8, Table 2(Length -IS 2380 (Part 2))	-	500	-
As per Clause 8, Table 2(Width - IS 2380 (Part 2))	-	500	-
As per Clause 8, Table 2(Thickness - IS 2380 (Part 2))	-	500	-
As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2))	-	500	-
As per Clause 8, Table 2(Edge straightness, Max.)	-	500	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	500	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	500	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	500	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	600	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	600	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	600	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	600	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	600	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	600	-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	600	-
As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	600	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	600	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	600	-
Cl-5.1(Wood and Any Other Lignocellulosic Material)	-	500	-
Cl-5.2(Adhesive)	-	500	-
Cl-5.3(Sizing Material)	-	500	-
Cl-5.4(Preservative Treatment)	-	500	-
Cl-6(MANUFACTURE)	-	500	-

23 May, 2028

-
Included w.e.f 18.12.2025

1806

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

High conductivity Aluminium Alloy Stranded conductor

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	500	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	1000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	1000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	1000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	1000	-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	1000	-
16.5, Table 2(Breaking Load Test - before stranding)	-	2000	-
16.5, Table 2(Breaking Load Test - after stranding)	-	2000	-
16.6, Table 1(Elongation Test - before stranding)	-	2000	-
16.6, Table 1(Elongation Test - after stranding)	-	2000	-
16.7, Table 2(Resistivity Test)	-	2000	-
16.8(Wrapping Test)	-	1000	-
11(Stranding)	-	500	-
8(Freedom from defects)	-	500	-
Cl-5(MATERIAL COMPOSITION)	-	4000	-
Cl-7, Table-1(Diameter of Wire (mm))	-	1000	-
Cl-7, Table-1(Minimum Tensile Strength of Wire)	-	2000	-
Cl-7, Table-1(Minimum Elongation on 250 mm (percent))	-	1000	-
Cl-8(Freedom from Defects)	-	500	-
Cl-9.1.1(Wires-Nominal Sizes)	-	1000	-
Cl-9.2.1(Stranded Conductors- Size)	-	1000	-
Cl-10(Joints in Wires)	-	500	-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	4000	-

28 Nov, 2028

-
Included w.e.f. 31.12.2025 "16.9, Table 3 (Ultimate Tensile Strength on Stranded Conductor) 16.11 (Stress-strain Test)"

1807

Matrix Test Labs

8138626

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	500	-
Cl-7(Marking and instructions)	-	500	-
Cl-8(Protection against access to live parts)	-	2000	-
Cl-10(Power input and current)	-	2000	-
Cl-11(Heating)	-	2000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	2500	-
Cl-16(Leakage current and electric strength)	-	2500	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	2000	-
Cl-20(Stability and mechanical hazards)	-	1500	-
Cl-21(Mechanical strength)	-	1500	-
Cl-22(Construction)	-	2000	-
Cl-23(Internal wiring)	-	1000	-
Cl-25(Supply connection and external flexible cords)	-	500	-
Cl-26(Terminals for external conductors)	-	1000	-
Cl-27(Provision for earthing)	-	1000	-
Cl-28(Screws and connections)	-	1000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	1500	-
Cl-30(Resistance to heat and fire)	-	1500	-
Cl-31(Resistance to rusting)	-	1500	-
Cl-32(Radiation, toxicity and similar hazards)	-	1500	-
Cl-12(Charging of metal-ion batteries)	-	2000	-
Cl-17(Overload protection of transformers and associated circuits)	-	2000	-

31 Dec, 2026

-
Included w.e.f 06.01.2026 "Cl-32 (Radiation, toxicity and similar hazards) Cl-19.11.4.1 (Electrostatic discharges) Cl-19.11.4.2 (Radiated fields) Cl-19.11.4.3 (Fast transient bursts) Cl-19.11.4.4 (Surge immunity test) Cl-19.11.4.5 (Immunity to conducted discharges) Cl-19.11.4.6 (Class 3 Voltage dips and interruptions) Cl-19.11.4.7 (Harmonics) Cl-24 (Components)"

1808

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

BWP/MR/Decorative Type/Commercial Type

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	1000	-
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	300	-
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	300	-
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	300	-
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	300	-
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	900	-
9.2.3(Adhesion of Plies - Annexure H)	-	300	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	900	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	0	-
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	300	-
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	300	-
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	300	-
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	300	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	300	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	300	-
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	100	-
7.3(Dimensional Requirements - Squareness - Annexure D)	-	100	-
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	100	-
7.3(Dimensional Requirements - Thickness - Annexure E)	-	0	-
7.3(Dimensional Requirements - Width - 8.1.4)	-	100	-
7.3(Dimensional Requirements - Length - 8.1.4)	-	100	-
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	100	-
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	100	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	0	-
cl. 11(marking)	-	0	-
cl. 11.1(marking - BIS certification marking)	-	0	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-
6.2(Core- Moisture & Width)	-	100	-
6.3(Cross Bands and Faces- Moisture content)	-	0	-
6.3.1(Thickness of cross band and face veneers)	-	100	-
Cl-7.1(Thickness)	-	0	-
Cl-7.2(Sizes)	-	0	-

26 Aug, 2027

-
Included w.e.f 17-12-2025.

1809

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

Aluminium Conductors galvanized steel-reinforced

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7(Freedom From Defects)	-	500	-
Cl-8.1(Wires-Nominal Sizes)	-	1000	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	500	-
Cl-9.1(Joint in Wires)	-	500	-
Cl-9.2(Aluminium Wires)	-	500	-
Cl-9.3(Galvanized Steel Wires)	-	500	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	500	-
Cl-13.3(Conductor- Visual examination)	-	200	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	1000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	1000	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	500	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	1000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	500	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	1000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	1000	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	500	-
Cl- 13.6(Steel wires- Breaking load test)	-	1000	-
Cl- 13.7(Steel wires- Ductility test)	-	2000	-
Cl- 13.8(Steel wires- Wrapping test)	-	1000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	1000	-
Cl-6(Material)	-	500	-
Cl-6.1.1(chemical composition of high carbon steel)	-	1000	-
Cl-6.2(zinc used for galvanizing)	-	1000	-
Cl-13.7.1(Torsion Test)	-	500	-
Cl-13.7.2(Elongation Test)	-	1000	-
Cl-11.1(Standard Length)	-	200	-
Cl-11.2(Random Lengths)	-	200	-

28 Nov, 2028

-
Included w.e.f. 31.12.2025 "Cl- 13.13 (Conductor- Surface condition test on stranded conductor) Cl- 13.14 (Conductor- Ultimate tensile strength test on stranded conductor) Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)) Cl-13.16 (Conductor- Radio interference voltage test)"

1810

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 738 (1994)

Wrought aluminium alloys, drawn tube for general engineering purposes - Specification (Third Revision)

All

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6(Freedom from Defects- Cl.6)	-	500	-
Cl.7, IS 2678(Wall Thickness at any point)	-	500	-
Cl.7, IS 2678(Mean Wall Thickness)	-	500	-
Cl.7, IS 2678(Straightness)	-	500	-
Cl. 9.1 Table 2(0.2 percent proof stress- IS 2657)	-	1000	-
Cl. 9.1 Table 2(Tensile Strength- IS 2657)	-	1000	-
Cl. 9.1 Table 2(Elongation on guage length of 50 mm)	-	1000	-
Cl. 9.1.2(Flattening Test- IS 2328)	-	1000	-
Cl. 8.1, Table 1(Aluminium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Copper- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Magnesium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Silicon- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Iron- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Manganese- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Zinc- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Titanium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Chromium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Ti+ V (Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 2(T. I.(Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 3(Ti+ Cr (Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 4(Cr+ Mn (Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
10(Marking)	-	1000	-

27 May, 2028

-
included w.e.f 22.01.2026

1811

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Aluminium conductor for Overhead Transmission

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	200	Rs.9000/- for 7 wire stands, Rs. 18000/- for 19 Strands, Rs.500/- for Separated Wire before Stranding (If provided)
12.3, Table-1(Breaking load before stranding)	-	500	-
12.3, Table-1(Breaking load after stranding)	-	500	-
12.4(Wrapping test)	-	500	-
12.5, Table 1(Resistance test)	-	1000	-
12.6, Table 3(Measurement of lay ratio)	-	200	-
9.3(Stranding)	-	200	-
6(Freedom from defects)	-	200	-
7.2.1(Sizes)	-	200	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	200	-
9.2(Lay ratio)	-	500	-
9.4(Multiple layer of wires)	-	200	-
4.1(Resistivity)	-	500	-
4.2(Density)	-	500	-
5(Material)	-	200	-
7.1.1(Nominal Sizes)	-	500	-
7.2.2(Resistance)	-	1000	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	-
12.3, Table-1(Breaking load before stranding)	-	1000	-
12.3, Table-1(Breaking load after stranding)	-	1000	-
12.4(Wrapping test)	-	500	-
12.5, Table 1(Resistance test)	-	1000	-
12.6, Table 3(Measurement of lay ratio)	-	200	-
9.3(Stranding)	-	100	-
6(Freedom from defects)	-	100	-
7.2.1(Sizes)	-	100	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	100	-
9.2(Lay ratio)	-	100	-
9.4(Multiple layer of wires)	-	100	-
4.1(Resistivity)	-	1000	-
4.2(Density)	-	1000	-
5(Material)	-	100	-
7.1.1(Nominal Sizes)	-	100	-
7.2.2(Resistance)	-	1000	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	-
4.4(Coefficient of Linear Expansion)	-	1000	-

28 Nov, 2028

-
included w.e.f 05-01-2026

1812

ABC Techno Labs India Private Limited

6164516

IS 14543 (2016)

Packaged drinking water (Other Than Packaged Natural Mineral Water) - Specification (Second Revision)

21100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(Escherichia coli (or thermotolerant bacteria))	-	350	10% Discount
5.2.2(Coliform)	-	300	10% Discount
5.2.3(Faecal Streptococci)	-	400	10% Discount
5.2.3(Staphylococcus Aureus)	-	400	10% Discount
5.2.4(Sulphite Reducing Anaerobes)	-	400	10% Discount
5.2.5(Pseudomonas Aeruginosa)	-	400	10% Discount
5.2.6(Aerobic Microbial Count at 20-22°C)	-	200	10% Discount
5.2.6(Aerobic Microbial Count at 37°C)	-	200	10% Discount
5.2.7(Yeast and Mould)	-	200	10% Discount
5.2.8(Salmonella)	-	500	10% Discount
5.2.8(Shigella)	-	500	10% Discount
5.2.9(Vibrio cholera)	-	400	10% Discount
5.2.9(Vibrio parahaemolyticus)	-	400	10% Discount
5.3(Description)	-	0	10% Discount
5.3 Table-1 i(Colour)	-	50	10% Discount
5.3 Table-1 iii(Taste)	-	50	10% Discount
5.3 Table-1 iv(Turbidity)	-	50	10% Discount
5.3 Table-1 v(Total dissolved solids)	-	200	10% Discount
5.3 Table-1vi(pH)	-	50	10% Discount
5.3 Table-2 i(Barium (as Ba))	-	200	10% Discount
5.3 Table-2 ii(Copper (as Cu))	-	300	10% Discount
5.3 Table-2 iii(Iron (as Fe),)	-	250	10% Discount
5.3 Table-2 iv(Manganese (as Mn))	-	400	10% Discount
5.3 Table-2 v(Nitrate (as NO3))	-	200	10% Discount
5.3 Table-2 vi(Nitrite (as NO2))	-	200	10% Discount
5.3 Table-2vii(Fluoride (as F))	-	400	10% Discount
5.3 Table-2 viii(Zinc (as Zn))	-	400	10% Discount
5.3 Table-2 ix(Silver (as Ag))	-	400	10% Discount
5.3 Table-2 x(Aluminium (as Al))	-	400	10% Discount
5.3 Table-2 xi(Chloride (as Cl))	-	100	10% Discount
5.3 Table-2 xii(Selenium (as Se),)	-	500	10% Discount
5.3 Table-2 xiii(Sulphate (as SO4),)	-	200	10% Discount
5.3 Table-2 xiv(Alkaliniity (as HCO3))	-	100	10% Discount
5.3 Table-2 xv(Calcium (as Ca),)	-	100	10% Discount
5.3 Table-2 xvi(Magnesium (as Mg))	-	100	10% Discount
5.3 Table-2 xvii(Sodium (as Na))	-	200	10% Discount
5.3 Table-2 xviii(Residual free chlorine)	-	100	10% Discount
5.3 Table-2 xix (Phenolic compounds (as C6H5OH))	-	450	10% Discount
5.3 Table-2 xx(Mineral oil)	-	450	10% Discount
5.3 Table-2 xxi (Anionic surface active agents (as MBAS))	-	450	10% Discount
5.3 Table-2 xxii(Sulphide (as H2S))	-	200	10% Discount
5.3 Table-2 xxiii(Antimony (as Sb))	-	500	10% Discount
5.3 Table-2 xxiv(Borates (as B))	-	500	10% Discount
5.3 Table-2 xxv(Bromates (as BrO3),)	-	1850	10% Discount
5.3 Table-3 i(Mercury (as Hg))	-	400	10% Discount
5.3 Table-3 ii(Cadmium (as Cd))	-	300	10% Discount
5.3 Table-3 iii(Arsenic (as As))	-	500	10% Discount
5.3 Table-3 iv (Cyanide (as CN))	-	250	10% Discount
5.3 Table-3 v(Lead (as Pb))	-	300	10% Discount
5.3 Table-3 vi(Chromium (as Cr))	-	400	10% Discount
5.3 Table-3 vii(Nickel (as Ni))	-	400	10% Discount
5.3 Table-3 viii (Polychlorinated biphenyle (PCB))	-	600	10% Discount
5.3 Table-3 ix (Polynuclear aromatic hydrocarbons)	-	700	10% Discount
5.4 i)(o,p DDT)	-	129	10% Discount
5.4 i)(p,p DDT)	-	129	10% Discount
5.4 i)(o,p DDE)	-	129	10% Discount
5.4 i)(p,p DDE)	-	129	10% Discount
5.4 i)(o,p DDD)	-	129	10% Discount
5.4 i)(p,p DDD)	-	129	10% Discount
5.4 i)(Gamma-HCH (Lindane))	-	129	10% Discount
5.4 i)(alpha-HCH)	-	129	10% Discount
5.4 i)(beta-HCH)	-	129	10% Discount
5.4 i)(Delta-HCH)	-	129	10% Discount
5.4 i)(alpha-Endosulfan)	-	129	10% Discount
5.4 i)(beta-Endosulfan)	-	129	10% Discount
5.4 i)(Endosulfan Sulphate)	-	129	10% Discount
5.4 i)(Monocrotophos)	-	129	10% Discount
5.4 i)(Ethion)	-	129	10% Discount
5.4 i)(Chlorpyrifos)	-	129	10% Discount
5.4 i)(Phorate)	-	129	10% Discount
5.4 i)(Phorate sulphoxide)	-	129	10% Discount
5.4 i)(phorate sulphone)	-	129	10% Discount
5.4 i)(2,4-D)	-	129	10% Discount
5.4 i)(Butachlor)	-	129	10% Discount
5.4 i)(Isoproturon)	-	129	10% Discount
5.4 i)(Alachlor)	-	129	10% Discount
5.4 i)(Atrazine)	-	129	10% Discount
5.4 i)(Methyl Parathion)	-	129	10% Discount
5.4 i)(Methyl Paraoxon)	-	129	10% Discount
5.4 i)(Malathion)	-	129	10% Discount
5.4 i)(Malaoxon)	-	129	10% Discount
5.4 i)(Aldrin)	-	129	10% Discount
5.4 i)(Dieldrin)	-	129	10% Discount
5.4 ii)(Total pesticied residue)	-	129	10% Discount
5.3 Table-1 ii(Odour)	-	50	10% Discount
Table 3, x)(Uranium)	-	450	10% Discount

04 Dec, 2028

-
-

1813

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 16205 : Part 24 (2017)

Conduit Systems for Cable Management part 24 Particular Requirements Conduit Systems Buried Under Ground

All Grade / Type / Size / Designation etc.

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Classification - Resistance to Compression)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.1.2(Classification - Resistance to Impact)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.1.4 of IS 16205 (Part 1) : 2017(Classification - Tensile Strength)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.1.5 of IS 16205 (Part 1) : 2017(Classification - Suspended Load Capacity)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.3 of IS 16205 (Part 1) : 2017(Classification - According to Electrical Characteristics)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.4 of IS 16205 (Part 1) : 2017(Classification - According to Resistance to External Influences)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.5 of IS 16205 (Part 1) : 2017(Classification - According to Resistance to Flame Propogation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.1(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.1.2(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.1.3(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.1.101(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.2(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.5 of IS 16205 (Part 1) : 2017(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.6 of IS 16205 (Part 1) : 2017(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.101(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.102(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
8 Table 101(Dimensions)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
8 Table 101(Dimensions)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
9.1 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
9.2 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
9.4 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
9.5 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
9.6 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
10.1(Mechanical Strength)	-	7000	10% Discount for BIS for other 1.5 times of mentioned testing charges
10.2(Compression Test)	-	2500	10% Discount for BIS for other 1.5 times of mentioned testing charges
10.3(Impact Test)	-	2500	10% Discount for BIS for other 1.5 times of mentioned testing charges
10.4(Bending Test)	-	2500	10% Discount for BIS for other 1.5 times of mentioned testing charges
13.1.3(Spread of fire)	-	1500	10% Discount for BIS for other 1.5 times of mentioned testing charges
13.1.3.1(Spread of fire)	-	1500	10% Discount for BIS for other 1.5 times of mentioned testing charges
13.1.3.2(Spread of fire)	-	1500	10% Discount for BIS for other 1.5 times of mentioned testing charges
14.0(External Influences)	-	15000	10% Discount for BIS for other 1.5 times of mentioned testing charges (Remark: Rating-upto IP 68)
14.2 of IS 16205 (Part 1) : 2017(Resistance against corrosion)	-	3500	10% Discount for BIS for other 1.5 times of mentioned testing charges
14.2 of IS 16205 (Part 1) : 2017(Mech)(Resistance against corrosion)	-	3500	10% Discount for BIS for other 1.5 times of mentioned testing charges
14(Mech)(External Influences)	-	15000	10% Discount for BIS for other 1.5 times of mentioned testing charges (Remark: Rating-upto IP 68)
13.1.3.2(Mech)(Spread of fire)	-	1500	10% Discount for BIS for other 1.5 times of mentioned testing charges
13.1.3.1(Mech)(Spread of fire)	-	1500	10% Discount for BIS for other 1.5 times of mentioned testing charges
13.1.3(Mech)(Spread of fire)	-	1500	10% Discount for BIS for other 1.5 times of mentioned testing charges
10.4(Mech)(Bending Test)	-	2500	10% Discount for BIS for other 1.5 times of mentioned testing charges
10.3(Mech)(Impact Test)	-	2500	10% Discount for BIS for other 1.5 times of mentioned testing charges
10.2(Mech)(Compression Test)	-	2500	10% Discount for BIS for other 1.5 times of mentioned testing charges
10.1(Mech)(Mechanical Strength )	-	7000	10% Discount for BIS for other 1.5 times of mentioned testing charges
9.6 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
9.5 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
9.4 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
9.2 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
9.1 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
8 Table 101(Mech)(Dimensions)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
8 Table 101(Mech)(Dimensions)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.102(Mech)(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.101(Mech)(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.6 of IS 16205 (Part 1) : 2017(Mech)(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.5 of IS 16205 (Part 1) : 2017(Mech)(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.2(Mech)(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.1.101(Mech)(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.1.3(Mech)(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.1.2(Mech)(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.1(Mech)(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.5 of IS 16205 (Part 1) : 2017(Mech)(Classification - According to Resistance to Flame Propogation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.4 of IS 16205 (Part 1) : 2017(Mech)(Classification - According to Resistance to External Influences)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.3 of IS 16205 (Part 1) : 2017(Mech)(Classification - According to Electrical Characteristics)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.1.5 of IS 16205 (Part 1) : 2017(Mech)(Classification - Suspended Load Capacity)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.1.4 of IS 16205 (Part 1) : 2017(Mech)(Classification - Tensile Strength)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.1.3(Mech)(Classification - Resistance to Bending)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.1.2(Mech)(Classification - Resistance to Impact)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.1.1 (Mech)(Classification - Resistance to Compression)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.1.3(Classification - Resistance to Bending)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.1.1(Classification - Resistance to Compression)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.1.2(Classification - Resistance to Impact)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.1.4 of IS 16205 (Part 1) : 2017(Classification - Tensile Strength)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.1.5 of IS 16205 (Part 1) : 2017(Classification - Suspended Load Capacity)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.3 of IS 16205 (Part 1) : 2017(Classification - According to Electrical Characteristics)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.4 of IS 16205 (Part 1) : 2017(Classification - According to Resistance to External Influences)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.5 of IS 16205 (Part 1) : 2017(Classification - According to Resistance to Flame Propogation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.1(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.1.2(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.1.3(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.1.101(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.2(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.5 of IS 16205 (Part 1) : 2017(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.6 of IS 16205 (Part 1) : 2017(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.101(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
7.102(Marking and Documentation)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
8 Table 101(Dimensions)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
8 Table 101(Dimensions)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
9.1 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
9.2 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
9.4 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
9.5 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
9.6 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
10.1(Mechanical Strength)	-	7000	10% Discount for BIS for other 1.5 times of mentioned testing charges
10.2(Compression Test)	-	2500	10% Discount for BIS for other 1.5 times of mentioned testing charges
10.3(Impact Test)	-	2500	10% Discount for BIS for other 1.5 times of mentioned testing charges
10.4(Bending Test)	-	2500	10% Discount for BIS for other 1.5 times of mentioned testing charges
13.1.3(Spread of fire)	-	1500	10% Discount for BIS for other 1.5 times of mentioned testing charges
13.1.3.1(Spread of fire)	-	1500	10% Discount for BIS for other 1.5 times of mentioned testing charges
13.1.3.2(Spread of fire)	-	1500	10% Discount for BIS for other 1.5 times of mentioned testing charges
14.0(External Influences)	-	15000	10% Discount for BIS for other 1.5 times of mentioned testing charges (Remark: Rating-upto IP 68)
14.2 of IS 16205 (Part 1) : 2017(Resistance against corrosion)	-	3500	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.1.3(Classification - Resistance to Bending)	-	1000	10% Discount for BIS for other 1.5 times of mentioned testing charges
6.1.1(Classification - Resistance to Compression)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
6.1.2(Classification - Resistance to Impact)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
6.1.4 of IS 16205 (Part 1) : 2017(Classification - Tensile Strength)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
6.1.5 of IS 16205 (Part 1) : 2017(Classification - Suspended Load Capacity)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
6.3 of IS 16205 (Part 1) : 2017(Classification - According to Electrical Characteristics)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
6.4 of IS 16205 (Part 1) : 2017(Classification - According to Resistance to External Influences)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
6.5 of IS 16205 (Part 1) : 2017(Classification - According to Resistance to Flame Propogation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.1(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.1.2(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.1.3(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.1.101(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.2(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.5 of IS 16205 (Part 1) : 2017(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.6 of IS 16205 (Part 1) : 2017(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.101(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.102(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
8 Table 101(Dimensions)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
8 Table 101(Dimensions)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
9.1 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
9.2 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
9.4 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
9.5 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
9.6 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
10.1(Mechanical Strength)	-	7000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
10.2(Compression Test)	-	2500	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
10.3(Impact Test)	-	2500	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
10.4(Bending Test)	-	2500	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
13.1.3(Spread of fire)	-	1500	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
13.1.3.1(Spread of fire)	-	1500	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
13.1.3.2(Spread of fire)	-	1500	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
14.0(External Influences)	-	15000	10% Discount to BIS and for other 1.5 times of mentioned testing charges. (Remark: Rating-upto IP 68)
14.2 of IS 16205 (Part 1) : 2017(Resistance against corrosion)	-	3500	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
6.1.3(Classification - Resistance to Bending)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
6.1.1(Classification - Resistance to Compression)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
6.1.2(Classification - Resistance to Impact)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
6.1.4 of IS 16205 (Part 1) : 2017(Classification - Tensile Strength)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
6.1.5 of IS 16205 (Part 1) : 2017(Classification - Suspended Load Capacity)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
6.3 of IS 16205 (Part 1) : 2017(Classification - According to Electrical Characteristics)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
6.4 of IS 16205 (Part 1) : 2017(Classification - According to Resistance to External Influences)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
6.5 of IS 16205 (Part 1) : 2017(Classification - According to Resistance to Flame Propogation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.1(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.1.2(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.1.3(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.1.101(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.2(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.5 of IS 16205 (Part 1) : 2017(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.6 of IS 16205 (Part 1) : 2017(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.101(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
7.102(Marking and Documentation)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
8 Table 101(Dimensions)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
8 Table 101(Dimensions)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
9.1 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
9.2 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
9.4 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
9.5 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
9.6 of IS 16205 (Part 1) : 2017(Construction)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
10.1(Mechanical Strength)	-	7000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
10.2(Compression Test)	-	2500	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
10.3(Impact Test)	-	2500	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
10.4(Bending Test)	-	2500	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
13.1.3(Spread of fire)	-	1500	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
13.1.3.1(Spread of fire)	-	1500	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
13.1.3.2(Spread of fire)	-	1500	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
14.0(External Influences)	-	15000	10% Discount to BIS and for other 1.5 times of mentioned testing charges. (Remark: Rating-upto IP 68)
14.2 of IS 16205 (Part 1) : 2017(Resistance against corrosion)	-	3500	10% Discount to BIS and for other 1.5 times of mentioned testing charges.
6.1.3(Classification - Resistance to Bending)	-	1000	10% Discount to BIS and for other 1.5 times of mentioned testing charges.

21 Aug, 2027

-
1. 15.0 (Electromagnetic Compatibility) Electromagnetic Compatibility This Equipment is not available with the laboratory as laboratory has not purchased this equipment yet as this equipment is expensive. Hence, we have opted for exclusion of Electromagnetic Compatibility Test as the setup for the testing is not available with the laboratory and other parameters are applicable with available facility in the laboratory. 2. 15(Mech) (Electromagnetic Compatibility) Electromagnetic Compatibility This Equipment is not available with the laboratory as laboratory has not purchased this equipment yet as this equipment is expensive. Hence, we have opted for exclusion of Electromagnetic Compatibility Test as the setup for the testing is not available with the laboratory and other parameters are applicable with available facility in the laboratory.

1814

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 5187 (1972)

Specification for flush bolts (First Revision)

ALL

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 2.1 Table 1(i)(Body and plate)	-	0	Raw material Testing Charges of IS 737 and IS 733 as per approved scope.
Clause 2.1 Table 1(ii)(Bolt)	-	0	-
Clause 2.1 Table 1(iii)(Spring)	-	0	-
Clause 3(Types, sizes and shape)	-	20000	-
Clause 5.1(Dimension)	-	20000	-
Clause 5.2(Tolerance)	-	20000	-
Clause 6(Workmanship and finish)	-	20000	-
Clause 7(Marking)	-	0	-
Clause 8(Packing)	-	0	-
Clause 2.1 Table 1(i)(Body and plate)	-	0	-
Clause 2.1 Table 1(ii)(Bolt)	-	0	-
Clause 2.1 Table 1(iii)(Spring)	-	0	-
Clause 3(Types, sizes and shape)	-	0	-
Clause 5.1(Dimension)	-	0	-
Clause 5.2(Tolerance)	-	0	-
Clause 6(Workmanship and finish)	-	0	-
Clause 7(Marking)	-	0	-
Clause 8(Packing)	-	0	-
Clause 2.1 Table 1(i)(Body and plate)	-	0	-
Clause 2.1 Table 1(ii)(Bolt)	-	0	-
Clause 2.1 Table 1(iii)(Spring)	-	0	-
Clause 3(Types, sizes and shape)	-	0	-
Clause 5.1(Dimension)	-	0	-
Clause 5.2(Tolerance)	-	0	-
Clause 6(Workmanship and finish)	-	0	-
Clause 7(Marking)	-	0	-
Clause 8(Packing)	-	0	-

-
Included w.e.f. 31.12.2025

1815

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 4621 (1975)

Specification for indicating bolts for use in public baths and lavatories (First Revision)

ALL

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(DIMENSIONS AND TOLERANCES)	-	12500	-
Clause 7(WORKMANSHIP AND FINISH)	-	12500	-
Clause 4.1(Dimension and tolerance)	-	12500	-
Clause 5.2 Table 2(i)(Body, knob and indicating spindle)	-	0	-
Clause 5.2 Table 2(ii)(Indicating disc)	-	0	-
Clause 5.2 Table 2(iii)(Gears)	-	0	-
Clause 7(Workmanship and finish)	-	12500	-
Clause 8(Marking)	-	0	-
Clause 9(Packing)	-	0	-
Cl-6(Manufacture)	-	0	-
5.0 Table -2(Tensile strength)	-	12500	-
IS 1868, Cl 10.0(Sulphur Dioxide test)	-	0	-
Cl .5 Table-2(Elongation)	-	12500	-
IS 1868, cl 14(Resistance to crazing deformation)	-	0	-
IS 1868, cl. 16(Light Reflection Property)	-	0	-
IS 1868, cl. 15.0(Fastness of light)	-	0	-
IS 1868, cl. 17.0(Electrical Breakdown Potential)	-	0	-
IS 1868, cl. 18(continuity of the Anodizing Coating)	-	0	-
IS 1868, cl. 12.0(Corrosion Resistance)	-	0	-
IS 1868, cl. 12(CASS Test)	-	0	-
IS 1868, cl. 12(AAS Test)	-	0	-
IS 1868, cl. 13.0(Abrasion Resistance)	-	0	-
Cl-5.0, Table-2(Tensile Strength)	-	12500	-
Cl-5.0, Table-2(Elongation)	-	12500	-
IS:1868, Clause-10.0(Sulphur Dioxide Test)	-	0	-
IS:1868, Clause-14.0(Resistance to crazing deformation)	-	0	-
IS:1868, Clause-16.0(Light reflection property)	-	0	-
IS:1868, Clause-15.0(Fastness to light)	-	0	-
IS:1868, Clause-15.0(Fastness to light)	-	0	-
IS:1868, Clause-17.0(Electrical Breakdown Potential)	-	0	-
IS:1868, Clause-18.0(Continuity of the Anodizing Coating)	-	0	-
IS:1868, Clause-12.0(Corrosion Resistance)	-	0	-
IS:1868, Clause-12.0(CASS Test)	-	0	-
IS:1868, Clause-12.0(AAS Test)	-	0	-
IS:1868, Clause-13.0(Abrasion Resistance)	-	0	-

-
Included w.e.f 22.01.2026

1816

Perfect International Testing Lab

8187826

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	250	N/A
6(Hazardous radiations)	-	0	N/A
7(Heating under normal operating conditions)	-	250	N/A
8(Constructional requirements with regard to the protection against electric shock)	-	250	N/A
9(Electric shock hazard under normal operating conditions)	-	250	N/A
10(Insulation requirements)	-	250	N/A
11(Fault conditions)	-	250	N/A
12(Mechanical strength)	-	250	N/A
13(CLEARANCES and CREEPAGE DISTANCES)	-	500	N/A
14(Components)	-	500	N/A
15(TERMINALS)	-	500	N/A
16(External flexible cords)	-	250	N/A
17(Electrical connections and mechanical fixings)	-	250	N/A
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	0	N/A
19(Stability and mechanical hazards)	-	500	N/A
20(Resistance to fire)	-	500	N/A
6.1(Ionizing radiation)	-	0	N/A
6.2(Laser Radiation)	-	0	N/A
6.3()	-	0	N/A
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	0	N/A
8.16(Wound Component)	-	0	N/A
14(Components)	-	0	N/A
15(Internal wires and power cords)	-	500	N/A
16.3b(Cord Bending Test)	-	250	N/A
18(Mechanical strength of Picture tubes and protection against the effect of implosion)	-	0	N/A
20.2.4(Printed Boards)	-	250	N/A
3(General requirements)	-	100	N/A
4(General test conditions)	-	100	N/A
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	500	N/A
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	250	N/A
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	250	N/A
Cl.5.1 of Cl.5(General requirements)	-	100	N/A
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	100	N/A
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	100	N/A
Cl.5.2 of Cl.5(Identification and supply ratings)	-	100	N/A
Cl.5.2 a) of Cl.5(Identification, maker)	-	100	N/A
Cl.5.2 b) of Cl.5(Model number or type reference)	-	100	N/A
Cl.5.2 d) of Cl.5(Nature of supply)	-	100	N/A
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	100	N/A
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	100	N/A
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	100	N/A
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	100	N/A
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	100	N/A
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	100	N/A
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	100	N/A
Cl.5.3 of Cl.5(Terminals)	-	100	N/A
Cl.5.3a) of Cl.5(Earth terminal)	-	100	N/A
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	100	N/A
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	100	N/A
Cl.5.4 of Cl.5(Caution marking)	-	100	N/A
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	100	N/A
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	100	N/A
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	100	N/A
Cl.5.5 of Cl.5(Instructions)	-	0	N/A
Cl.5.5 of Cl.5(Instructions)	-	0	N/A
Cl.5.5 of Cl.5(Instructions)	-	0	N/A
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	100	N/A
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	0	N/A
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	100	N/A
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	0	N/A
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	0	N/A
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	0	N/A
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	0	N/A
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	0	N/A
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	100	N/A
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	100	N/A
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	100	N/A
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	100	N/A
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	100	N/A
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	0	N/A
Cl.7.1 of Cl.7(General)	-	250	N/A
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	250	N/A
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	100	N/A
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	100	N/A
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	100	N/A
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	100	N/A
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	100	N/A
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	100	N/A
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	250	N/A
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	250	N/A
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	100	N/A
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	100	N/A
Cl.8.5 of Cl.8(Class I apparatus*)	-	100	N/A
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	100	N/A
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	100	N/A
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	100	N/A
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	100	N/A
Cl.8.6 of Cl.8(Class II apparatus)	-	100	N/A
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	100	N/A
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	0	N/A
Cl.8.7 of Cl.8(Components bridging insulation)	-	100	N/A
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	100	N/A
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	100	N/A
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	0	N/A
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	0	N/A
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	100	N/A
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	100	N/A
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	100	N/A
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	100	N/A
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	0	N/A
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	0	N/A
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	0	N/A
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	100	N/A
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	100	N/A
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	100	N/A
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	100	N/A
Cl.8.11 of Cl.8(Detaching of wires)	-	100	N/A
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	0	N/A
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	500	N/A
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	N/A
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	N/A
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	100	N/A
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	0	N/A
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	0	N/A
Cl.8.18 of Cl.8(Disconnection from the mains)	-	0	N/A
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	100	N/A
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	100	N/A
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	0	N/A
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	0	N/A
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	0	N/A
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	0	N/A
Cl.9.1 of Cl.9(Testing on the outside)	-	250	N/A
Cl.9.1.1 of Cl.9.1(Requirements)	-	250	N/A
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	100	N/A
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	100	N/A
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	100	N/A
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	100	N/A
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	100	N/A
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	100	N/A
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	100	N/A
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	0	N/A
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	100	N/A
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	100	N/A
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	0	N/A
Cl.9.1.4 of Cl.9.1(Terminals)	-	0	N/A
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	100	N/A
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	100	N/A
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	100	N/A
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	0	N/A
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	0	N/A
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	N/A
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	N/A
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	250	N/A
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	100	N/A
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	100	N/A
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	100	N/A
Cl.9.2 of Cl.9(Removal of protective covers)	-	100	N/A
Cl.10.2 of Cl.10(Surge Test)	-	300	N/A
Cl.10.2 a) of Cl.10(Surge Test)	-	100	N/A
Cl.10.2 b) of Cl.10(Surge Test)	-	100	N/A
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	100	N/A
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	100	N/A
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	100	N/A
Cl.10.3 of Cl.10(Humidity treatment)	-	100	N/A
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	250	N/A
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	100	N/A
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	100	N/A
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	100	N/A
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	100	N/A
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	100	N/A
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	150	N/A
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	100	N/A
Cl.11.2 of Cl.11(Heating)	-	250	N/A
Cl.11.2.1 of Cl.11.2(Requirements)	-	0	N/A
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	100	N/A
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	100	N/A
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	100	N/A
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	100	N/A
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	100	N/A
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	100	N/A
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	100	N/A
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	100	N/A
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	100	N/A
Cl.11.2.6 of Cl.11.2(Windings )	-	100	N/A
Cl.11.2.7 of Cl.11.2(Printed boards)	-	100	N/A
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	100	N/A
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	100	N/A
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	100	N/A
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	0	N/A
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	0	N/A
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	N/A
Cl.12.1.1 of Cl.12.1(Requirements)	-	0	N/A
Cl.12.1.2 of Cl.12.1(Bump test )	-	250	N/A
Cl.12.1.3 of Cl.12.1(Vibration test)	-	250	N/A
Cl.12.1.4 of Cl.12.1(Impact test)	-	250	N/A
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	100	N/A
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	100	N/A
Cl.12.1.5 of Cl.12.1(Drop test)	-	100	N/A
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	250	N/A
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	100	N/A
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	100	N/A
Cl.12.4 of Cl.12(Drawers )	-	250	N/A
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	250	N/A
Cl.12.5 a) of Cl.12(Endurance test,)	-	500	N/A
Cl.12.5 b) of Cl.12(Impact test,)	-	250	N/A
Cl.12.5 c) of Cl.12(Torque test)	-	100	N/A
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	100	N/A
Cl.12.6.1 of Cl.12.6(General requirements)	-	100	N/A
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	100	N/A
Cl.12.6.2 of Cl.12.6(Physical securement)	-	100	N/A
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	250	N/A
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	100	N/A
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	250	N/A
Cl.12.7.3 of Cl.12.7(Tests)	-	100	N/A
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	100	N/A
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	100	N/A
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	100	N/A
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	100	N/A
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	100	N/A
Cl.12.7.4 of Cl.12.7(Compliance)	-	100	N/A
Cl.13.1 of Cl.13(General)	-	100	N/A
Cl.13.2 of Cl.13(Determination of Working voltage)	-	100	N/A
Cl.13.3 of Cl.13(Clearances)	-	100	N/A
Cl.13.3.1 of Cl.13.3(General)	-	100	N/A
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	100	N/A
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	100	N/A
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	100	N/A
Cl.13.4 a) of Cl.13(Creepage distances )	-	100	N/A
Cl.13.4 b) of Cl.13(Creepage distances )	-	100	N/A
Cl.13.4 c) of Cl.13(Creepage distances )	-	100	N/A
Cl.13.6 a) of Cl.13(Jointed insulation )	-	100	N/A
Cl.13.6 b) of Cl.13(Jointed insulation )	-	100	N/A
Cl.13.6 c) of Cl.13(Jointed insulation )	-	100	N/A
Cl.13.6 d) of Cl.13(Jointed insulation )	-	100	N/A
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	100	N/A
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	100	N/A
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	250	N/A
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	100	N/A
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	100	N/A
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	100	N/A
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	100	N/A
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	100	N/A
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	100	N/A
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	100	N/A
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	100	N/A
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	100	N/A
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	100	N/A
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	250	N/A
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	100	N/A
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	100	N/A
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	100	N/A
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	100	N/A
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	100	N/A
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	100	N/A
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	100	N/A
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	100	N/A
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	100	N/A
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	100	N/A
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	100	N/A
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	100	N/A
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	100	N/A
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	100	N/A
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	100	N/A
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	100	N/A
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	100	N/A
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	100	N/A
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	100	N/A
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	100	N/A
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	100	N/A
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	100	N/A
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	100	N/A
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	250	N/A
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	250	N/A
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	100	N/A
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	100	N/A
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	100	N/A
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	100	N/A
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	100	N/A
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	100	N/A
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	100	N/A
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	100	N/A
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	100	N/A
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	100	N/A
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	250	N/A
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	250	N/A
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	100	N/A
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	100	N/A
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	100	N/A
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	100	N/A
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	100	N/A
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	100	N/A
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	100	N/A
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	100	N/A
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	100	N/A
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	100	N/A
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	100	N/A
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	250	N/A
Cl.19.1 of Cl.19(Stability requirements)	-	100	N/A
Cl.19.1 i) of Cl.19(Stability requirements)	-	100	N/A
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	100	N/A
Cl.19.3 of Cl.19(Vertical force test )	-	100	N/A
Cl.19.4 of Cl.19(Horizontal force test)	-	100	N/A
Cl.19.5 of Cl.19(Test of edges and corners)	-	100	N/A
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	0	N/A
Cl.19.6.1 of Cl.19.6(Requirements)	-	100	N/A
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	100	N/A
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	100	N/A
Cl.19.7.1 of Cl.19..7(Requirements)	-	100	N/A
Cl.19.7.3 of Cl.19.7(Compliance)	-	0	N/A
Cl.20.1 of Cl.20(Requirements)	-	0	N/A
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	100	N/A
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	0	N/A
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	0	N/A
Cl.20.2.2 of Cl.20.2(Electrical components )	-	100	N/A
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	250	N/A
Cl.20.2.4 of Cl.20.2(Printed boards)	-	100	N/A
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	0	N/A
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	N/A
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	N/A
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	N/A
Cl.20.3 of Cl.20(Fire enclosure*)	-	100	N/A
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	0	N/A
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	0	N/A
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	0	N/A

02 Sep, 2028

-
Included w.e.f 31.12.2025 Exclusion: 6 (Hazardous radiations) 14 (Components) 18 (Mechanical strength of picture tubes and protection against the effects of implosion) 6.1 (Ionizing radiation) 6.2 (Laser Radiation) 6.3 Light emitting diodes (LEDs) Lab has no test facility 8.16/ H 2.2/ H 2.3 (Requirements for insulated winding wires for use without additional interleaved insulation) 8.16 (Wound Component)

1817

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

01/C1/C2

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	100	Rs. 8000/- for Category-01& Rs. 15000 for category Cl & C2 (1 core) Rs. 12,000/- for Category — 01 & Rs. 20,000 for category Cl & C2 (up to 4 cores) Rs. 16000/- for Category — 01& Rs. 24000 for category Cl & C2 (above 4 cores and up to 12 Cores cable.
4.1.1(INSULATION : General Purjose Insulaiion)	-	100	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	100	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	500	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	500	-
6.1(MATERIALS : ARMGURING)	-	500	-
6.2(MATERIALS : ARMGURING)	-	500	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	100	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	100	-
8.1(CONSTRUCTION : CONDUCTOR)	-	200	-
8.2(CONSTRUCTION : CONDUCTOR)	-	200	-
9.1(INSULATION )	-	200	-
9.2(INSULATION : Thickness of Insulation)	-	1000	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	1000	-
9.4(INSULATION : Application of Insulation)	-	200	-
10.1(CORE IDENTIFICATION)	-	100	-
10.2(CORE IDENTIFICATION)	-	100	-
10.3(CORE IDENTIFICATION)	-	100	-
10.3.1(Arrangement of Marking)	-	200	-
11.1(LAYING UP OF CORES)	-	100	-
11.2(LAYING UP OF CORES)	-	100	-
12.1(INNER SHEATH)	-	100	-
12.2(INNER SHEATH)	-	100	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	500	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	500	-
13.1.1(ARMOURING : Application)	-	200	-
13.1.2(Armouring: Coverage )	-	1000	-
13.1.3(ARMOURING : Direction of lay )	-	200	-
13.1.4(ARMOURING : Application)	-	100	-
13.2(ARMOURING : Type of Armour)	-	500	-
13.2.1(ARMOURING : Type of Armour)	-	200	-
13.3(Armouring : Dimensions -Wire Diameter)	-	20	-
13.3(Armouring : Dimensions -Formed wire )	-	200	-
13.4(ARMOURING : Joints)	-	100	-
13.5.1(ARMOURING : Resistance)	-	1000	-
13.5.2(ARMOURING : Resistance)	-	1000	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	2000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	1500	-
13.6 g)(ARMOURING: Resistivity)	-	1000	-
14.1(OUTER SHEATH)	-	100	-
14.2(OUTER SHEATH)	-	100	-
14.3(OUTER SHEATH : Colour )	-	100	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	500	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	500	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	1000	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	1000	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	500	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	1000	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	1000	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	1000	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	500	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	1000	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	500	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	2000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	2000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	500	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	500	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2000	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2000	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	1000	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	1000	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	2000	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	200	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	2000	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	200	-
15.1 d)4)(Hot deformation : Insulation )	-	3000	-
15.1 d)4)(Hot deformation : Sheath )	-	3000	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	4000	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	4000	-
15.1 d)6)(Heat shock test- Insulation )	-	2000	-
15.1 d)6)(Heat shock test- sheath )	-	2000	-
15.1 d)7)(Thermal stability- insulation )	-	3000	-
15.1 d)7)(Thermal stability- Sheath )	-	3000	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	3000	-
15.1 e)(Insulation resistance test : IR Constant )	-	500	-
15.1 f)(High voltage test ( water immersion test ))	-	5000	-
15.1 g)(High voltage test at room temperature)	-	1000	-
15.1 g)(High voltage test at room temperature)	-	1000	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	3000	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	3000	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	3000	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	3000	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	1000	-
16.1(DETAILS OF TESTS : General)	-	1000	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	1000	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	5000	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	3000	-
16.4(Flammability Test)	-	1000	-
16.5(Oxygen Index Test)	-	5000	-
16.6(Flame Retardance Test on Single Cables)	-	3000	-
16.7(Flame Retardance Test on Bunched Cables)	-	5000	-
16.9(Test for Halogen Acid Gas Evolution)	-	50000	-
16.1(Temperature Index)	-	5000	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	500	-
17.2(IDENTIFICATION : Cable Identification)	-	500	-
17.2.1(IDENTIFICATION : Cable Identification)	-	200	-
17.3(IDENTIFICATION : Cable Code)	-	200	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	4000	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	2000	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	4000	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	2000	-
16.4(Flammability Test- Un affected portion)	-	2000	-
16.4(Flammability Test- Period of Burning)	-	200	-
9.3(Minimum Thickness of Reduce core insulation)	-	1000	-
9.2(Thickness of Reduce core insulation)	-	1000	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	500	-
Cl No. 16.10(Smoke density test)	-	5000	-
Table 4(Copper purity test)	-	4000	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Flexibility class)	-	200	-
[(Cl.15), (d), 2](After ageing, Elongation of Sheath [Percentage])	-	4000	-
Cl No. 16.10(Smoke density test)	-	5000	-
Table 4(Copper purity test)	-	500	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Conductor, Number of wires.)	-	500	-
Cl.8(Flexibility class)	-	500	-
[(Cl.15), (d), 2](After ageing, Elongation of Sheath [Percentage])	-	1000	-
Cl No. 16.8(Test for specific optical density of smoke)	-	5000	-

28 Nov, 2028

-
included w.e.f 05-01-2026

1818

ADS LABTECH, GHAZIABAD

8178326

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

ROTATIONAL MOULDED POLYETHYLENE WATER STORAGE TANK.S

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	1000	-
4.2.3(Carbon Dispersion Test)	-	500	-
5(Types and Features )	-	100	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.3(Types and Features )	-	100	-
5.6(Types and Features )	-	100	-
6.1(Finish)	-	0	-
7.1.1(Resistance to Deformation)	-	1000	-
7.1.2(Resistance to Deformation)	-	1000	-
7.2(Resistance to Impact)	-	800	-
7.3(Test for Top Load Resistance)	-	900	-
7.4(Tensile Strength)	-	1000	-
7.5(Flexural Modulus)	-	1100	-
7.6(overall Migration)	-	2500	-
9.2.1(Man-Hole and Hand-Hole Lids)	-	200	-
9.2(Man-Hole and Hand-Hole Lids)	-	200	-
9.1(Man-Hole and Hand-Hole Lids)	-	200	-
9.1(Lid Thickness)	-	200	-
7.3(Test for Top Load Resistance)	-	400	-
6.1(Finish)	-	0	-
5.4(Wall Thickness above effective height)	-	200	-
5.2 Table 2 (7)(Minimum Wall Thickness)	-	200	-
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	500	-
4.2.1(Density)	-	500	-
4.2.2(MFI)	-	1000	-
7.6(overall Migration)	-	2500	-
4.1(MATERIALS)	-	2500	-
4.2.2(MFR)	-	1000	-
4.2.1(Density)	-	500	-
5.4(Wall Thickness)	-	200	-
10(MARKING)	-	0	-
Cl-7.6(Overall Migration)	-	2500	-
4.2.3(Carbon Black Content )	-	1000	-
4.2.3(Carbon Dispersion Test)	-	500	-
5(Types and Features )	-	100	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500	-
5.3(Types and Features )	-	100	-
5.6(Types and Features )	-	100	-
6.1(Finish)	-	0	-
7.1.1(Resistance to Deformation)	-	1000	-
7.1.2(Resistance to Deformation)	-	1000	-
7.2(Resistance to Impact)	-	800	-
7.3(Test for Top Load Resistance)	-	800	-
7.4(Tensile Strength)	-	1000	-
7.5(Flexural Modulus)	-	1200	-
7.6(overall Migration)	-	2500	-
4.2.1(Density)	-	500	-
4.2.2(MFI)	-	1000	-
7.6(overall Migration)	-	2500	-
4.1(MATERIALS)	-	2500	-
4.2.2(MFR)	-	1000	-
4.2.1(Density)	-	500	-
5.4(Wall Thickness)	-	200	-
10(MARKING)	-	0	-
Cl-7.6(Overall Migration)	-	2500	-
4.2.3(Carbon Black Content )	-	1000	-
4.2.3(Carbon Dispersion Test)	-	500	-
5(Types and Features )	-	500	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	100	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	100	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	100	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	100	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	100	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	100	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	100	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	100	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	100	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	100	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	100	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	100	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	100	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	100	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	100	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	100	-
5.3(Types and Features )	-	0	this testing charge mention in above clause no-5
5.6(Types and Features )	-	0	this testing charge mention in above clause no-5
6.1(Finish)	-	200	-
7.1.1(Resistance to Deformation)	-	1000	For Cylindrical
7.1.2(Resistance to Deformation)	-	1000	For vertical
7.2(Resistance to Impact)	-	800	-
7.3(Test for Top Load Resistance)	-	800	-
7.4(Tensile Strength)	-	1000	-
7.5(Flexural Modulus)	-	1500	-
7.6(overall Migration)	-	2500	-
4.2.1(Density)	-	0	Mention in material test
4.2.2(MFI)	-	0	Mention in material test
7.6(overall Migration)	-	0	-
4.1(MATERIALS)	-	0	-
4.2.2(MFR)	-	0	-
4.2.1(Density)	-	0	-
5.4(Wall Thickness)	-	0	-
10(MARKING)	-	250	Our total testing charge 12500. we mention clause wise testing charge, but some clauses are repeated so consider clause wise rate.
Cl-7.6(Overall Migration)	-	0	-

15 May, 2027

-
Included w.e.f. 06.02.2026 Exclusion: Scope restricted to 5000 Ltr

1819

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 15834 (2020)

Stainless Steel Sliding Door Bolts ( Aldrops ) for Use With Padlocks - Specification ( First Revision )

ALL

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	6500	-
Cl 6(MANUFACTURE)	-	0	-
Cl 7(FINISH)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
5(DIMENSIONS AND TOLERANCES)	-	6500	-
6(MANUFACTURE)	-	0	-
7(FINISH)	-	6500	-
8(Marking)	-	0	-
8(Marking)	-	0	-
Cl.4(Carbon)	-	6500	-
Cl.4(Sulphur)	-	6500	-
Cl.4(Phosphorus)	-	6500	-
Cl.4(Manganese)	-	6500	-
Cl.4(Silicon)	-	6500	-
Cl.4(Nickel)	-	6500	-
Cl.4(Chromium)	-	6500	-
Cl.4(Copper)	-	6500	-
Cl.4(Molybdenum)	-	6500	-
Cl.4(Nitrogen)	-	6500	-
Cl.4(Titanium)	-	6500	-
Cl.4(Niobium)	-	6500	-
Sub-Clause. 10.3.1(Dimension)	-	6500	-
Sub-Clause. 10.3.2(Tensile test)	-	6500	-
Sub-Clause. 10.3.3(corrosion resistance)	-	6500	-

-
Included w.e.f 22.01.2026

1820

Samridhi Test House Pvt. Ltd.

8184706

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

All Grade / Type / Size / Designation

4400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	100	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	0	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	500	-
Cl. 6.2(Opacity- Appendix B)	-	300	-
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	300	-
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	300	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	300	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	300	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	500	-
6.1.1(VCM Content Test)	-	500	-
3(Size of Fitting -)	-	100	-
4(Minimum thickness)	-	0	-
5(Socket dimensions)	-	100	-
6.1(Stress Relief Test)	-	300	-
6.2(Opacity)	-	0	-
6.3(Effect on Water)	-	0	-
6.4(Short-Term Hydraulic Test)	-	500	-
7.2(Production Routine Tests)	-	300	-
Cl 6.3(Effect on Water Lead (first extraction))	-	0	-
Cl 6.3(Effect on Water Lead (third extraction))	-	0	-
Cl 6.3(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	0	-
Cl 6.3(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 6.3(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-
CL 4.0(Wall thickness (average of 4.0))	-	0	-
CL 5.1(Sockt Length ( Take 4 reading and minimum will be reported))	-	0	-
Cl.4(Minimum Thickness)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	0	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	0	-
Cl. 6.2(Opacity- Appendix B)	-	0	-
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	0	-
6.1.1(VCM Content Test)	-	0	-
3(Size of Fitting -)	-	0	-
4(Minimum thickness)	-	0	-
5(Socket dimensions)	-	0	-
6.1(Stress Relief Test)	-	0	-
6.2(Opacity)	-	0	-
6.3(Effect on Water)	-	0	-
6.4(Short-Term Hydraulic Test)	-	0	-
7.2(Production Routine Tests)	-	0	-
Cl 6.3(Effect on Water Lead (first extraction))	-	0	-
Cl 6.3(Effect on Water Lead (third extraction))	-	0	-
Cl 6.3(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	0	-
Cl 6.3(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 6.3(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-
CL 4.0(Wall thickness (average of 4.0))	-	0	-
CL 5.1(Sockt Length ( Take 4 reading and minimum will be reported))	-	0	-
Cl.4(Minimum Thickness)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	0	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	0	-
Cl. 6.2(Opacity- Appendix B)	-	0	-
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	0
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	0	-
6.1.1(VCM Content Test)	-	0	-
3(Size of Fitting -)	-	0	-
4(Minimum thickness)	-	0	-
5(Socket dimensions)	-	0	-
6.1(Stress Relief Test)	-	0	-
6.2(Opacity)	-	0	-
6.3(Effect on Water)	-	0	-
6.4(Short-Term Hydraulic Test)	-	0	-
7.2(Production Routine Tests)	-	0	-
Cl 6.3(Effect on Water Lead (first extraction))	-	0	-
Cl 6.3(Effect on Water Lead (third extraction))	-	0	-
Cl 6.3(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	0	-
Cl 6.3(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 6.3(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-
CL 4.0(Wall thickness (average of 4.0))	-	0	-
CL 5.1(Sockt Length ( Take 4 reading and minimum will be reported))	-	0	-

-
Included w.e.f 17.03.2026

1821

Global Scientific Solution (P) Ltd.

8189526

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

Safety of electric radiators (room heaters) for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 415 V for other appliances.

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	0	-
Cl.6 (Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7(Marking and Instructions)	-	1000	-
Cl.7(Marking and Instructions)	-	1000	-
Cl.7(Marking and Instructions)	-	1000	-
Cl.7.3(Marking and Instructions)	-	1000	-
Cl.7.3(Marking and Instructions)	-	1000	-
Cl.7.3(Marking and Instructions)	-	1000	-
Cl.7.4(Marking and Instructions)	-	1000	-
Cl.7.5(Marking and Instructions)	-	1000	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	1000	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.14(Marking and Instructions)	-	1000	-
Cl.7.14(Marking and Instructions)	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	1000	-
Cl.7.101(Marking and Instructions)	-	1000	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11 & IS:302-1:2008(Heating)	-	1000	-
Cl.11.8(Heating)	-	1000	-
Cl.11.8(Heating)	-	1000	-
Cl.11.8(Heating)	-	1000	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	1000	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	1000	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	1000	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	2000	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	1000	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	1000	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	1000	-
Cl.18 (Endurance. )	-	2000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	1000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	1000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	1000	-
Cl.19.101(Abnormal Operation.)	-	1000	-
Cl.19.102(Abnormal Operation.)	-	1000	-
Cl.19.103(Abnormal Operation.)	-	1000	-
Cl.19.104(Abnormal Operation.)	-	1000	-
Cl.19.105(Abnormal Operation.)	-	1000	-
Cl.19.106(Abnormal Operation.)	-	1000	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	1000	-
Cl.19.107(Abnormal Operation.)	-	1000	-
Cl.19.108(Abnormal Operation.)	-	1000	-
Cl.19.109(Abnormal Operation.)	-	1000	-
Cl.19.110(Abnormal Operation.)	-	1000	-
Cl.19.111(Abnormal Operation.)	-	1000	-
Cl.19.112(Abnormal Operation.)	-	1000	-
Cl.19.113(Abnormal Operation.)	-	1000	-
Cl.19.114(Abnormal Operation.)	-	1000	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	1000	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	1000	-
Cl.21.101 (Mechanical Strength.)	-	1000	-
Cl.21.102(Mechanical Strength.)	-	1000	-
Cl.21.103(Mechanical Strength.)	-	1000	-
Cl.22.1 of IS 302-1:2008(Construction)	-	1000	-
Cl.22.5 of IS 302-1:2008(Construction)	-	1000	-
Cl.22.6 of IS 302-1:2008(Construction)	-	1000	-
Cl.22.7 of IS 302-1:2008(Construction)	-	1000	-
Cl.22.8 of IS 302-1:2008(Construction)	-	1000	-
Cl.22.9 of IS 302-1:2008(Construction)	-	1000	-
Cl.22.11(Construction)	-	1000	-
Cl.22.13 of IS 302-1:2008(Construction)	-	1000	-
Cl.22.14 of IS 302-1:2008(Construction)	-	1000	-
Cl.22.15 of IS 302-1:2008(Construction)	-	1000	-
Cl.22.18 of IS 302-1:2008(Construction)	-	1000	-
Cl.22.20 of IS 302-1:2008(Construction)	-	1000	-
Cl.22.21 of IS 302-1:2008(Construction)	-	1000	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	1000	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	1000	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	1000	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	1000	-
C.23.7 of 302-1:2008(Internal Wiring )	-	1000	-
Cl.24.1 of 302-1:2008(Component)	-	1000	-
Cl.24.1 of 302-1:2008(Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
C.24.1.4(Component)	-	1000	-
C.24.2 of 302-1:2008(Component)	-	1000	-
Cl.24.10(Component)	-	1000	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	1000	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	1000	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	1000	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	1000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	1000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	1000	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	2000	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	2000	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	1000	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	1000	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	1000	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	2000	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	2000	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	1000	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	1000	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	1000	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	1000	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	1000	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	1000	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	1000	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	1000	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	1000	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	1000	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	1000	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	1000	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	1000	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	1000	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	1000	-
Cl.24 of IS:302-2-30:2007(Component)	-	1000	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	1000	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	1000	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	1000	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	1000	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	1000	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	1000	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	1000	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	1000	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	1000	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	1000	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	1000	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	1000	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	1000	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	1000	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	1000	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	1000	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	1000	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	1000	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	1000	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	1000	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	1000	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	1000	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	1000	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	1000	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	1000	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	1000	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	1000	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	1000	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	1000	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	1000	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	1000	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	1000	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	1000	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	1000	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	1000	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	1000	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	1000	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	1000	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	1000	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	1000	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	1000	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	1000	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	1000	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	1000	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	1000	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	1000	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	1000	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	1000	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	1000	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	1000	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	1000	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	1000	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	1000	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	1000	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	1000	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	1000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	1000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	1000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	1000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	1000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	1000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	1000	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	1000	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	1000	-
Cl.22.12 of IS 302-1:2008(Construction)	-	1000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	1000	-

31 Oct, 2028

-
Included w.e.f 05.01.2026 Exclusion: Cl 19.11.4.1 -19.11.4.7 (EMI/EMC)

1822

TERAWATT TESTING AND RESEARCH INSTITUTE PRIVATE LIMITED

8197526

IS 9283 (2024)

LINE OPERATED A.C. MOTORS FOR SUBMERSIBLE PUMPSETS - SPECIFICATION (THIRD REVISION)

Rated voltage: up to 500 V, Rated power: up to 25.95 kW

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As Per Clause 5.1.2 Table 1(Material)	-	50	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As Per Clause 5.1.3(Construction-General)	-	50	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 5.1.4(Construction-General)	-	50	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 5.2.1(Earthing)	-	190	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 5.4.1(Construction-Type of cable & Size of conductor of cable)	-	100	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 5.4.2(Construction-Length of cable)	-	100	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 5.4.3(Construction-Joint in Cable)	-	100	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 5.5(Finish of Bearings)	-	150	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 5.6(Balancing of Rotor)	-	800	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 7.1(Dimensions of Motors)	-	100	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 7.2(Tolerances)	-	100	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 12.1(Efficiency)	-	600	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 12.1(Efficiency)	-	600	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 13(Terminal Marking)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.1(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.1(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.1(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.1(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.1(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.1(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.1(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.1(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.1(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.1(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.1(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.1(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.1(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.1(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.1(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 15.2(Rating Plate)	-	30	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 16.1(a),21(Insulationresistance test(Before HV Test))	-	600	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 16.1(a),21(Insulationresistance test(After HV Test))	-	600	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 16.1(b),20(High voltage test)	-	800	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 16.[c](Measurement of stator resistance)	-	900	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 16.(d)(No Load Test)	-	600	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 16.(e)(Reduced voltage running up test at no load)	-	600	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 16.(f)(Locked rotor readings of voltage, current, power input and torque of motors)	-	700	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 16.(g)(Full load reading of voltage, current, power input, speed and frequency)	-	600	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 16.(h),11(Performance characteristics)	-	1500	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 16.(j),19(Temperature rise test at rated voltage)	-	3000	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 16.(k),19(Temperature rise test at reduced voltage)	-	3000	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 16.(m),18(Momentary Overload Test)	-	2000	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW
As per Clause 16.(n),22(Leakage Current Test at rated voltage at no load)	-	600	Rs. 6500 Up to 3.7 kW; Rs. 7500 above 3.7 to 7.5 kW; Rs. 12500 above 7.5 to 11 kW; Rs. 15000 above 11 to 15 kW; Rs. 16500 above 15 to 20 kW; Rs. 19000 above 20 to 25 kW

-
-

1823

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 17017 : Part 2 : Sec 6 (2021)

Electric Vehicle Conductive Charging System Part 2 Plugs Socket Outlets Vehicle Connectors and Vehicle Inlets Section 6 Dimensional compatibility requirements for DC pin and contact t

450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General requirements)	-	10000	-
Cl-4.1(cord extension set)	-	10000	-
Cl-5(RATINGS)	-	10000	-
Cl-5.1(Preferred rated operating voltage ranges)	-	10000	-
Cl-5.2(Preferred rated currents)	-	10000	-
Cl-6(CONNECTION BETWEEN THE POWER SUPPLY AND THE ELECTRIC VEHICLE)	-	30000	-
Cl-6.3(DC interface)	-	30000	-
Cl-7(CLASSIFICATION OF ACCESSORIES)	-	30000	-
Cl-8(Marking)	-	30000	-
Cl-9(DIMENSIONS)	-	30000	-
Cl-10(PROTECTION AGAINST ELECTRIC SHOCK)	-	30000	-
Cl-10.3(Contact sequencing and order of contact insertion and withdrawal)	-	30000	-
Cl-13(TERMINALS)	-	30000	-
Cl-14(INTERLOCKS)	-	30000	-
Cl-14.2(Accessories with integral switching device)	-	50000	-
Cl-14.4(Pilot contacts and auxiliary circuits)	-	50000	-
Cl-14.601(Latching function)	-	50000	-
Cl-15(RESISTANCE TO AGEING OF RUBBER AND THERMOPLASTIC MATERIAL)	-	50000	-
Cl-18(CONSTRUCTION OF PLUGS AND OF VEHICLE CONNECTORS)	-	50000	-
Cl-19(CONSTRUCTION OF VEHICLE INLETS)	-	50000	-
Cl-20(DEGREES OF PROTECTION)	-	50000	-
Cl-21(INSULATION RESISTANCE AND DIELECTRIC STRENGTH)	-	50000	-
Cl-24(TEMPERATURE RISE)	-	50000	-
Cl-25(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50000	-
Cl-26(MECHANICAL STRENGTH)	-	50000	-
Cl-27(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	50000	-
Cl-28(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES)	-	50000	-
Cl-29(RESISTANCE TO HEAT AND FIRE)	-	50000	-
Cl-30(CORROSION AND RESISTANCE TO RUSTING)	-	50000	-
Cl-32(ELECTROMAGNETIC COMPATIBILITY)	-	100000	-
Cl-4.1(General requirements)	-	1000	-
Cl-4.1(cord extension set)	-	10000	-
Cl-5(RATINGS)	-	1000	-
Cl-5.1(Preferred rated operating voltage ranges)	-	10000	-
Cl-5.2(Preferred rated currents)	-	10000	-
Cl-6(CONNECTION BETWEEN THE POWER SUPPLY AND THE ELECTRIC VEHICLE)	-	10000	-
Cl-6.3(DC interface)	-	10000	-
Cl-7(CLASSIFICATION OF ACCESSORIES)	-	10000	-
Cl-8(Marking)	-	50000	-
Cl-9(DIMENSIONS)	-	50000	-
Cl-10(PROTECTION AGAINST ELECTRIC SHOCK)	-	50000	-
Cl-10.3(Contact sequencing and order of contact insertion and withdrawal)	-	50000	-
Cl-13(TERMINALS)	-	50000	-
Cl-14(INTERLOCKS)	-	50000	-
Cl-14.2(Accessories with integral switching device)	-	50000	-
Cl-14.4(Pilot contacts and auxiliary circuits)	-	50000	-
Cl-14.601(Latching function)	-	50000	-
Cl-15(RESISTANCE TO AGEING OF RUBBER AND THERMOPLASTIC MATERIAL)	-	50000	-
Cl-18(CONSTRUCTION OF PLUGS AND OF VEHICLE CONNECTORS)	-	50000	-
Cl-19(CONSTRUCTION OF VEHICLE INLETS)	-	50000	-
Cl-20(DEGREES OF PROTECTION)	-	50000	-
Cl-21(INSULATION RESISTANCE AND DIELECTRIC STRENGTH)	-	50000	-
Cl-24(TEMPERATURE RISE)	-	50000	-
Cl-25(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50000	-
Cl-26(MECHANICAL STRENGTH)	-	50000	-
Cl-27(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	50000	-
Cl-28(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES)	-	50000	-
Cl-29(RESISTANCE TO HEAT AND FIRE)	-	50000	-
Cl-30(CORROSION AND RESISTANCE TO RUSTING)	-	50000	-
Cl-32(ELECTROMAGNETIC COMPATIBILITY)	-	100000	-

-
Included w.e.f 12.02.2026

1824

National Test House (WR) - NTH, Mumbai

7107604

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Type A/Type B)	-	500	-
5 Table-1(Sizes Diameter of Line wire)	-	500	-
5 Table-1(Sizes Diamater of Point wire)	-	500	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	1000	-
5 Table-1(Sizes Distance between two barbs)	-	1000	-
5 Table-1(Sizes No. of Lays between the two consequtive barbs)	-	1000	-
7.1(Manufacture)	-	1000	-
7.2(Manufacture)	-	1000	-
7.2(Manufacture)	-	1000	-
7.3(Manufacture)	-	1000	-
8(CHROMATING)	-	1000	-
9.1(Freedom from defects)	-	500	-
9.2(Freedom from defects)	-	500	-
9.2(Freedom from defects)	-	500	-
9.2(Freedom from defects)	-	500	-
12.1(Tensile Strength)	-	3000	-
12.1(Breaking load)	-	3000	-
12.2.1(Mass of zinc coating (line wire))	-	1000	-
12.2.2(Mass of zinc coating (point wire))	-	1000	-
12.2(Uniformity of zinc coating)	-	1000	-
12.3(Ductility)	-	1000	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.2(Cut Angle)	-	1000	-
Cl. 7.2(Length of Barbs)	-	1000	-
Cl. 7.2(Finishing of Barbs)	-	1000	-
Cl. 7.1(General)	-	1000	-
11(Sampling)	-	1000	-
13(Marking)	-	500	-
CL 05(Average dia of line wire (08))	-	1000	-
CL 05(Average dia of point wire (08))	-	1000	-
CL 05(Average Distance Between Two Barbs (08))	-	1000	-
4(Type A/Type B)	-	1000	-
5 Table-1(Sizes Diameter of Line wire)	-	1000	-
5 Table-1(Sizes Diamater of Point wire)	-	1000	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	1000	-
5 Table-1(Sizes Distance between two barbs)	-	1000	-
5 Table-1(Sizes No. of Lays between the two consequtive barbs)	-	1000	-
7.1(Manufacture)	-	0	-
7.2(Manufacture)	-	0	-
7.2(Manufacture)	-	0	-
7.3(Manufacture)	-	0	-
8(CHROMATING)	-	1500	-
9.1(Freedom from defects)	-	1000	-
9.2(Freedom from defects)	-	1000	-
9.2(Freedom from defects)	-	1000	-
9.2(Freedom from defects)	-	1000	-
12.1(Tensile Strength)	-	3000	-
12.1(Breaking load)	-	3000	-
12.2.1(Mass of zinc coating (line wire))	-	1500	-
12.2.2(Mass of zinc coating (point wire))	-	1500	-
12.2(Uniformity of zinc coating)	-	1500	-
12.3(Ductility)	-	3000	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	-
Cl. 7.2(Cut Angle)	-	1000	-
Cl. 7.2(Length of Barbs)	-	1000	-
Cl. 7.2(Finishing of Barbs)	-	1000	-
Cl. 7.1(General)	-	0	-
11(Sampling)	-	0	-
13(Marking)	-	0	-
CL 05(Average dia of line wire (08))	-	1000	-
CL 05(Average dia of point wire (08))	-	1000	-
CL 05(Average Distance Between Two Barbs (08))	-	1000	-

-
included w.e.f 24.02.2026

1825

INTERNATIONAL TESTING AND COMPLIANCE (OPC) PRIVATE LIMITED

8188026

IS 17017 : Part 2 : Sec 3 (2020)

Electric Vehicle Conductive Charging System Part 2 Plugs, Socket ” Outlets, Vehicle Connectors and Vehicle Inlets Section 3 Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers

450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(GENERAL)	-	10000	-
Cl-5(RATINGS)	-	10000	-
Cl-6(CONNECTION BETWEEN THE POWER SUPPLY AND THE ELECTRIC VEHICLE)	-	10000	-
Cl-6.6(d.c. Configurations)	-	10000	-
Cl-6.301(Configuration FF Combined Interface)	-	10000	-
Cl-7(CLASSIFICATION OF ACCESSORIES)	-	10000	-
Cl-8(MARKING)	-	30000	-
Cl-9(DIMENSIONS)	-	30000	-
Cl-9.1(Dimensions-3-I)	-	30000	-
Cl-9.1(Dimensions-3-IV)	-	30000	-
Cl-10(PROTECTION AGAINST ELECTRIC SHOCK)	-	50000	-
Cl-10.301(configuration AA, vehicle couplers)	-	50000	-
Cl-10.302(configurations FF, vehicle couplers)	-	50000	-
Cl-11(SIZE AND COLOUR OF EARTHING CONDUCTORS)	-	50000	-
Cl-12(PROVISION FOR EARTHING)	-	50000	-
Cl-13(TERMINALS)	-	50000	-
Cl-14.301(Latching Function)	-	50000	-
Cl-15(RESISTANCE TO AGING OF RUBBER AND THERMOPLASTIC MATERIAL)	-	50000	-
Cl-16(GENERAL CONSTRUCTION)	-	50000	-
Cl-18(CONSTRUCTION OF PLUGS AND VEHICLE CONNECTORS)	-	50000	-
Cl-19(CONSTRUCTION OF VEHICLE INLETS)	-	50000	-
Cl-20(DEGREES OF PROTECTION)	-	50000	-
Cl-21(INSULATION RESISTANCE AND DIELECTRIC STRENGTH)	-	50000	-
Cl-22(BREAKING CAPACITY)	-	50000	-
Cl-23(NORMAL OPERATION)	-	50000	-
Cl-24(TEMPERATURE RISE)	-	50000	-
Cl-25(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50000	-
Cl-26(MECHANICAL STRENGTH)	-	50000	-
Cl-27(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	50000	-
Cl-28(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES)	-	50000	-
Cl-29(RESISTANCE TO HEAT, TO FIRE AND TO TRACKING)	-	50000	-
Cl-30(CORROSION AND RESISTANCE TO RUSTING)	-	50000	-
Cl-4(GENERAL)	-	1000	-
Cl-5(RATINGS)	-	1000	-
Cl-6(CONNECTION BETWEEN THE POWER SUPPLY AND THE ELECTRIC VEHICLE)	-	1000	-
Cl-6.6(d.c. Configurations)	-	50000	-
Cl-6.301(Configuration FF Combined Interface)	-	50000	-
Cl-7(CLASSIFICATION OF ACCESSORIES)	-	50000	-
Cl-8(MARKING)	-	50000	-
Cl-9(DIMENSIONS)	-	50000	-
Cl-9.1(Dimensions-3-I)	-	50000	-
Cl-9.1(Dimensions-3-IV)	-	50000	-
Cl-10(PROTECTION AGAINST ELECTRIC SHOCK)	-	50000	-
Cl-10.301(configuration AA, vehicle couplers)	-	50000	-
Cl-10.302(configurations FF, vehicle couplers)	-	50000	-
Cl-11(SIZE AND COLOUR OF EARTHING CONDUCTORS)	-	50000	-
Cl-12(PROVISION FOR EARTHING)	-	50000	-
Cl-13(TERMINALS)	-	50000	-
Cl-14.301(Latching Function)	-	50000	-
Cl-15(RESISTANCE TO AGING OF RUBBER AND THERMOPLASTIC MATERIAL)	-	50000	-
Cl-16(GENERAL CONSTRUCTION)	-	50000	-
Cl-18(CONSTRUCTION OF PLUGS AND VEHICLE CONNECTORS)	-	50000	-
Cl-19(CONSTRUCTION OF VEHICLE INLETS)	-	50000	-
Cl-20(DEGREES OF PROTECTION)	-	50000	-
Cl-21(INSULATION RESISTANCE AND DIELECTRIC STRENGTH)	-	50000	-
Cl-22(BREAKING CAPACITY)	-	50000	-
Cl-23(NORMAL OPERATION)	-	50000	-
Cl-24(TEMPERATURE RISE)	-	50000	-
Cl-25(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50000	-
Cl-26(MECHANICAL STRENGTH)	-	50000	-
Cl-27(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	50000	-
Cl-28(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES)	-	50000	-
Cl-29(RESISTANCE TO HEAT, TO FIRE AND TO TRACKING)	-	50000	-
Cl-30(CORROSION AND RESISTANCE TO RUSTING)	-	150000	-

-
Included w.e.f 12.02.2026

1826

ACE TEST HOUSE PRIVATE LIMITED (8161906), NEW DELHI

8161906

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR/BWR/BWP/AA/AB/AC/BB/BC/CC

9300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	100	-
Cl-5.2, Table- 1 (i)(Blister)	-	100	-
Cl-5.2, Table- 1 (ii)(Checks)	-	100	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	100	-
Cl-5.2, Table- 1 (iv)(Dote)	-	100	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	-
Cl-5.2, Table- 1 (vi)(Joints)	-	100	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	-
Cl-5.2, Table- 1 (xi)(Patches)	-	100	-
Cl-5.2, Table- 1 (xii)(Splits)	-	100	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	100	-
Cl-7.2.1(Thickness of veneers)	-	300	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	100	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	100	-
Cl-8.1(Dimensions -length)	-	100	-
Cl-8.2(Thickness of the plywood boards)	-	300	-
Cl-8.3(Squareness)	-	300	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1500	-
Cl-11.4(Moisture Content)	-	600	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	500	-
Cl-11.6(Formaldehyde Content Test)	-	1500	-
Cl-9(WORKMANSHIP AND FINISH)	-	100	-
Cl-7.2.4(Scarf Joints)	-	0	-
Cl. 4(Grades)	-	0	-
Cl.5.1(Type based on classification by appearance)	-	100	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	0	-
Cl.8.1(Dimensions -width)	-	300	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	0	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	0	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	0	-
Cl-8.3(Edge Straightness)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	100	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	100	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	100	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	200	-
Cl-13(Marking)	-	0	-
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	0	-
Cl-8.2(Thickness of the plywood boards)	-	0	-
Cl-8.3(Squareness)	-	0	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	0	-
Cl-11.3.2(Mycological Test)	-	0	-
Cl-11.4(Moisture Content)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-
Cl. 4(Grades)	-	0	-
Cl.5.1(Type based on classification by appearance)	-	0	-
Cl.5.2(Quality Requirements of Plywood for General Purposes)	-	0	-
Cl.8.1(Dimensions -width)	-	0	-
Cl.8, 8.3 & Annex C(Edge Straightness)	-	0	-
Cl.8, 8.3 & Annex C(Edge Squareness)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	0	-
Cl-11.5, Table-4,(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	0	-
Cl-8.3(Edge Straightness)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	0	-
Cl-11.5, Table-4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	0	-
Cl-13(Marking)	-	0	-

26 Aug, 2027

-
Included w.e.f 10.12.2025 Cl-11.7 (Steady-State Formaldehyde Emission Test)

1827

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 281 (2009)

Mild steel sliding door bolts for use with padlocks - Specification (Fourth Revision)

ALL

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1 (Ref. Cl.9 of IS 1868:1996)(Thickness Test for Copper Plating of Oxidized Finished Material, Cl. 4 of IS 1378 : 1987 & Cl 3 of IS 3203)	-	12000	-
Cl. 8.2 (Ref. Cl.9 of IS 1868:1996)(Thickness Test for Copper Plating of Oxidized Finished Material, Cl. 4 of IS 1378 : 1987 & Cl 3 of IS 3203)	-	12000	-
3(TYPES)	-	0	-
4(SIZES)	-	12000	-
6(DIMENSIONS AND TOLERANCES-A)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-A)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-B)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-C)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-D)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-E)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-F)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-G)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-H)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-J)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-T)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 (IS 451))	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Rivets on bolts plates)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Rivets on Socket)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Screw holes on bolt)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Screw holes on Socket)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Screw holes on Staple)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-no. of 8m Sqire Holes for carriage bolts for Staple)	-	12000	-
7.1(MANUFACTURE-General)	-	0	-
7.1(MANUFACTURE-General)	-	0	-
7.1(MANUFACTURE-General)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	Material testing charges 12500/-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	0	Material testing charges 12500/-
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	0	-
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	0	-
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	0	-
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	0	-
8.1(FINISH-Sliding Bolts, Plate Type)	-	12000	-
5.1.2(Bend test)	-	12000	-
5.2.1(Tensile test)	-	12000	-
5.2.2(Bend Test)	-	12000	-
6-Table 1(DIMENSIONS AND TOLERANCES-no. of 8m Sqire Holes for carriage bolts for plate and sockets)	-	12000	-
Cl. 8.1 (Ref. Cl.9 of IS 1868:1996)(Thickness Test for Copper Plating of Oxidized Finished Material, Cl. 4 of IS 1378 : 1987 & Cl 3 of IS 3203)	-	0	-
Cl. 8.2 (Ref. Cl.9 of IS 1868:1996)(Thickness Test for Copper Plating of Oxidized Finished Material, Cl. 4 of IS 1378 : 1987 & Cl 3 of IS 3203)	-	0	-
3(TYPES)	-	0	-
4(SIZES)	-	0	-
6(DIMENSIONS AND TOLERANCES-A)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-A)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-B)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-C)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-D)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-E)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-F)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-G)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-H)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-J)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-T)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 (IS 451))	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Rivets on bolts plates)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Rivets on Socket)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Screw holes on bolt)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Screw holes on Socket)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-No. of Screw holes on Staple)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-no. of 8m Sqire Holes for carriage bolts for Staple)	-	0	-
7.1(MANUFACTURE-General)	-	0	-
7.1(MANUFACTURE-General)	-	0	-
7.1(MANUFACTURE-General)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.2(MANUFACTURE-Sliding Door Bolts, Plate Type)	-	0	-
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	0	-
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	0	-
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	0	-
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	0	-
7.3(MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-	0	-
8.1(FINISH-Sliding Bolts, Plate Type)	-	0	-
5.1.2(Bend test)	-	0	-
5.2.1(Tensile test)	-	0	-
5.2.2(Bend Test)	-	0	-
6-Table 1(DIMENSIONS AND TOLERANCES-no. of 8m Sqire Holes for carriage bolts for plate and sockets)	-	0	-

-
-

1828

TERAWATT TESTING AND RESEARCH INSTITUTE PRIVATE LIMITED

8197526

IS 14220 (2018)

Openwell submersible pumpsets - Specification (First Revision)

Rated voltage: up to 500 V, Rated power: up to 25.95 kW

21800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Design Features)	-	10	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
8.1.1(Design Features)	-	10	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
8.1.4(Design Features)	-	10	-
8.1.5(Design Features)	-	10	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
8.1.5(Design Features)	-	10	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
8.1.7(Design Features)	-	10	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
9(Efficiency)	-	1000	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Performance (Cl 17.1 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Suction and Delivery Ends (Cl 17.2 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Suction and Delivery Ends (Cl 17.2.1 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Fluid Passages (Cl 17.3 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Draining Plugrs (Cl 17.4 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Lantern Ring (Cl 17.5 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Casing (Cl 17.6 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Impeller (Cl 17.7 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Shaft (Cl 17.8 of IS 5120))	-	250	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Shaft Couplings (Cl 17.9 of IS 5120))	-	250	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Bearings (Cl 17.10 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Bearings (Cl 17.10.1 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Bearings (Cl 17.10.2 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10( Stuffing Boxes (Cl 17.11 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Base Plates (Cl 17.12 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Prime Mover (Cl 17.13 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Name Plate (Cl 17.14 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Name Plate (Cl 17.14 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Name Plate (Cl 17.14 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10(Name Plate (Cl 17.14.1 of IS 5120))	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10.2(Casing)	-	50	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10.3(Impeller)	-	50	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10.4.1(Shaft)	-	250	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10.4.2(Shaft)	-	250	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10.5.1(Balancing)	-	250	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10.5.2(Balancing)	-	250	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10.5.3(Balancing)	-	250	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10.5.4(Balancing)	-	250	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10.6.1( Provision for Earthing)	-	50	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10.6.2( Provision for Earthing)	-	50	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10.6.3( Provision for Earthing)	-	50	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10.6.4( Provision for Earthing)	-	50	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10.7.1(Terminal Marking and Direction of Rotation)	-	50	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10.7.2(Terminal Marking and Direction of Rotation)	-	50	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
10.7.3(Terminal Marking and Direction of Rotation)	-	50	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	300	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	300	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
15.5(Hydrostatic Pressure Test)	-	1500	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
16.1.1( Guarantee of Performance)	-	300	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
16.1.2( Guarantee of Performance)	-	300	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
16.1.3( Guarantee of Performance)	-	300	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
16.1.4( Guarantee of Performance)	-	300	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
16.1.5( Guarantee of Performance)	-	300	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1.3(Marking)	-	35	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
7(Constructional features)	-	30	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
7.1(It is recognized that a number of materials of construction are available to meet the needs for pumps handling clear, cold water.)	-	30	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
7.2(Gaskets, seals and packings used for clear, cold water pumps shall conform to the applicable requirements specified in 5.2 of IS 5120.)	-	30	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
7.3(The motor shall be provided with a breathing attachment like bellows, diaphragm etc; to compensate the volumetric variation of water inside the motor due to change in the temperature.)	-	30	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
7.4(The motor shall be protected from ingress of well water, sand and other foreign matter by means of cable glands, rubber seals etc.)	-	30	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
7.5(All materials and components for the motor shall be suitable for application in respect of resistance and mechanical performance to protect it)	-	20	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
7.6(The rotor of the wet type open well submersible motor and rotor in water filled designed motor shall be provided with suitable coating from corrosion under water. However if suitable anticorrosion additive is added in the water, no separate protection on rotors is necessary.)	-	20	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
8(Design Features)	-	20	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
8.1.2(The multi-stage pump shaft may be guided through bearings, the bearings may be provided in stage casing, suction housing and discharge casing, while in case of intermediate bearings, suitable positions may be selected in the overall span.)	-	20	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
8.1.3(The pump may be equipped with replaceable bearing and wearing ring, wherever provided.)	-	20	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
8.1.4(The strainer on the suction shall offer the best compromise amongst restraining large solids from entering the pump and containing the suction losses to the minimum.)	-	20	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
8.1.5(The pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +5 percent and minimum –15 percent of the guaranteed duty point head up to 30 m. Above 30 m, the pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +10 percent and minimum –25 percent of the guaranteed duty point head.)	-	20	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
12(Cable)	-	50	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
12.1(Flat/Round cables as per IS694 shall be used)	-	20	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
12.1.2(The size of the conductor shall be adequate and suitable for contineous use under water and in air. the length of the cable shall be minimum 2 m externallly unless otherwise specified by the customer)	-	20	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
12.1.3(The size and of the cable should be suitably selected so that the voltage drop between control panel and the mptor terminal does not exeed three percent of the rated voltage)	-	20	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
12.1.4(In case a joint is required to be made between the lead cable supplied with the motor and the user’s cable, a detailed procedure to make water tight joining shall be supplied by the motor manufacturer.)	-	20	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
12.1.5(If four core cable is used, the fourth core is to be used for earthing.)	-	20	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
14.10.1(Type test)	-	350	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
14.10.1(a)(Insulation Resistance test)	-	350	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
14.10.1(b)(High Voltage test)	-	350	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
14.10.1(c)(Measurement of stator resistance)	-	350	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
14.10.1(d)(No load test at rated voltage)	-	350	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
14.10.1(e)(Reduced voltage running up test at no load)	-	350	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
14.10.1(f)(Locked rotor)	-	1200	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
14.10.1(g)(Breakaway (starting) torque)	-	1000	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
14.10.1(h)(Leakage current test;)	-	300	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
14.10.1(j)(Temperature rise test at rated voltage)	-	2500	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
14.10.1(k)(Temperature rise test at reduced voltage)	-	2500	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
16.1(Guarntee of Performance)	-	600	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
16.1.1(The pumpset shall be guaranteed for their performance of the nominal volume rate of flow and the nominal head at the guaranteed duty point. The overall efficiency of the pumpset shall be guaranteed at the declared duty point only.)	-	250	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
16.1.2(The guarantee shall be deemed to have been met with, if the measured values of head, volume rate of flow and overall efficiency are within the indicated in IS 11346 limits)	-	300	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
16.1.3(Open well submersible motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.)	-	300	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
16.1.4(The pump shall be tested for the operating head range as per 8.1.5.)	-	300	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
16.1.5(The overloading of motor is that condition when maximum current drawn by the motor exceeds the limit of 1.07 times of the rated motor current)	-	300	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
16.1.6(The tolerance shall apply to guaranteed duty point only.)	-	300	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
16.1.7(Performance at rated voltage and supply frequency is actual performance of the set. This is better than performance at rated speed, since in the entire operating head range speed of motor is higher than rated speed, as motor is running in under loaded condition.)	-	300	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
16.1.8(The manufacturer shall specify the minimum submergence of pump unit at duty point.)	-	300	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
18.1(Marking)	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
16.4.1 (Amendment-1)(Pump efficiency)	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW
9 (Amendment-1)(EFFICIENCY)	-	40	Rs. 7000 Up to 3.7 kW; Rs. 8100 above 3.7 to 7.5 kW; Rs. 13400 above 7.5 to 11 kW; Rs. 16200 above 11 to 15 kW; Rs. 17500 above 15 to 20 kW; Rs. 21800 above 20 to 25 kW

-
-

1829

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 7534 (1985)

Specificaiton for sliding locking bolts for use with padlocks

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 table 2(DIMENSIONS OF LOCKING BOLT)	-	7500	-
5.1 table 2(1. The locking bolts shall have smooth sliding action. 2. All sharp edges and corners shall be removed and finished smooth. 3. All screw holes shall be countersunk to suit the countersunk head wood screws)	-	7500	-
7.1(Mild steel locking bolts copper oxidized)	-	7500	-
7.1(Mild steel locking bolts Electrogalvanised)	-	7500	-
7.1(Aluminium alloy bolt anodized)	-	7500	-
7.1(Anodic Coatic)	-	7500	-
5.1.1(Bolt Plate)	-	7500	-
5.1.2(Bolt)	-	7500	-
4(Mild steel sheet, Aluminium alloy sheet)	-	13500	-

-
Included w.e.f. 01.04.2026

1830

Samridhi Test House Pvt. Ltd.

8184706

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

All Grade / Type / Size / Designation

12800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	100	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1000	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	100	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	100	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	100	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	100	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	100	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	100	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	100	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1000	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	1000	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	1500	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	700	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1000	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1000	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000	-
8.6(Effect on Water Test)	-	1500	-
14(Marking)	-	100	-
Cl 8.6(Effect on Water Lead (first extraction))	-	1500	-
Cl 8.6(Effect on Water Lead (first extraction))	-	1500	-
Cl 8.6(Effect on Water Lead (third extraction))	-	1500	-
Cl 8.6(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	1500	-
Cl 8.6(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	1500	-
Cl 8.6(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	1500	-
CL 7.3(Socket length (Take 4 reading & minimum will be reported))	-	100	-
CL 7.3.1(Socket wall Thickness For S2 and S3 (Take 4 reading and average will be reported))	-	100	-
CL 7.3.2 grooved sockets(Inside diameter of Sockets, D1 (Take 4 reading & minimum, Maximum will be reported))	-	100	-
CL 7.3.2 grooved sockets(Inside diameter of beading D2 (Take 4 reading & minimum, Maximum will be reported))	-	100	-
CL 7.3.2 grooved sockets(Length of beading and Neck A (Take 4 reading & Maximum will be reported))	-	100	-
CL 7.3.2 grooved sockets(Neck of Socket B (Take 4 reading & minimum, will be reported))	-	100	-
CL 7.3.2 grooved sockets(Length beyond beading C (Take 4 reading & minimum will be reported))	-	100	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	1000	-
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	0	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	0	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	0	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	0	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	0	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	0	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	0	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	0	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	0	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	0	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	0	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	0	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	0	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	0	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	0	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	0	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	0	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	0	-
8.6(Effect on Water Test)	-	0	-
14(Marking)	-	0	-
Cl 8.6(Effect on Water Lead (first extraction))	-	0	-
Cl 8.6(Effect on Water Lead (first extraction))	-	0	-
Cl 8.6(Effect on Water Lead (third extraction))	-	0	-
Cl 8.6(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	0	-
Cl 8.6(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 8.6(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-
CL 7.3(Socket length (Take 4 reading & minimum will be reported))	-	0	-
CL 7.3.1(Socket wall Thickness For S2 and S3 (Take 4 reading and average will be reported))	-	0	-
CL 7.3.2 grooved sockets(Inside diameter of Sockets, D1 (Take 4 reading & minimum, Maximum will be reported))	-	0	-
CL 7.3.2 grooved sockets(Inside diameter of beading D2 (Take 4 reading & minimum, Maximum will be reported))	-	0	-
CL 7.3.2 grooved sockets(Length of beading and Neck A (Take 4 reading & Maximum will be reported))	-	0	-
CL 7.3.2 grooved sockets(Neck of Socket B (Take 4 reading & minimum, will be reported))	-	0	-
CL 7.3.2 grooved sockets(Length beyond beading C (Take 4 reading & minimum will be reported))	-	0	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	0	-
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	0	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	0	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	0	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	0	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	0	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	0	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	0	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	0	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	0	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	0	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	0	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	0	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	0	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	0	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	0	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	0	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	0	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	0	-
8.6(Effect on Water Test)	-	0	-
14(Marking)	-	0	-
Cl 8.6(Effect on Water Lead (first extraction))	-	0	-
Cl 8.6(Effect on Water Lead (first extraction))	-	0	-
Cl 8.6(Effect on Water Lead (third extraction))	-	0	-
Cl 8.6(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	0	-
Cl 8.6(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 8.6(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-
CL 7.3(Socket length (Take 4 reading & minimum will be reported))	-	0	-
CL 7.3.1(Socket wall Thickness For S2 and S3 (Take 4 reading and average will be reported))	-	0	-
CL 7.3.2 grooved sockets(Inside diameter of Sockets, D1 (Take 4 reading & minimum, Maximum will be reported))	-	0	-
CL 7.3.2 grooved sockets(Inside diameter of beading D2 (Take 4 reading & minimum, Maximum will be reported))	-	0	-
CL 7.3.2 grooved sockets(Length of beading and Neck A (Take 4 reading & Maximum will be reported))	-	0	-
CL 7.3.2 grooved sockets(Neck of Socket B (Take 4 reading & minimum, will be reported))	-	0	-
CL 7.3.2 grooved sockets(Length beyond beading C (Take 4 reading & minimum will be reported))	-	0	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	0	-

-
Included w.e.f 31.12.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number