BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11322 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

1861

BIS, Northern Regional Laboratory (NRL)

None

IS 9294 (2023)

COLD-ROLLED STAINLESS STEEL STRIPS FOR RAZOR BLADES - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-12 (Edge Condition)	-
Cl-13.1 (Width)	-
Cl-13.1 (Thickness)	-
Cl-14 (Surface Finish)	-
Cl-7.1 (i) (Carbon)	-
Cl-7.1 (ii) (Manganese)	-
Cl-7.1 (iii) (Silicon)	-
Cl-7.1 (iv) (Sulphur)	-
Cl-7.1 (v) (Phosphorus)	-

-
excluding microalloying elements for chemical analysis

1862

Bharat Test House Pvt Ltd 781 Haryana

9137826

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	5000	-
6(Classification)	-	500	-
5(General conditions for the tests)	-	100	-
11.8(Temperature rise)	-	5000	-
11.7(Duration corresponding)	-	5000	-
11.6(Combined appliances)	-	5000	-
11.5(Motor-operated appliances)	-	5000	-
11.4(Heating appliances)	-	5000	-
8.1.5(Live parts of built-in appliances)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	3000	-
16(Leakage current and electric strength)	-	3000	-
4(General requirement)	-	100	-
32(Radiation Toxicity and Similar Hazards)	-	2000	-
31(Resistance to Rusting)	-	2000	-
30.2(Needle Flame Test)	-	4000	-
30.2(Glow Wire Test)	-	4000	-
30.1(Ball pressure test)	-	4000	-
29(clearance, creepage distances and solid insulation)	-	3000	-
28(Screw test and connections)	-	2000	-
27(Provision for earthing)	-	2500	-
26(Terminals for external conductors)	-	2000	-
25(Supply connection and external flexible cords)	-	2500	-
23(Internal wiring)	-	2000	-
22(Construction)	-	6000	-
21(Mechanical Strength)	-	2500	-
20(Stability and mechanical hazards)	-	2000	-
19(Abnormal Operation)	-	8000	-
17(Over Load Protection of Transformers and associated circuits)	-	3000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	3000	-
16.2(Leakage Current (after Clause 15))	-	3000	-
16.1(General)	-	3000	-
16.0(General)	-	3000	-
15.3(Humidity Test)	-	5000	-
15.2(Spillage Test)	-	5000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	5000	-
15.0(Moisture resistance)	-	5000	-
14(Transient Over Voltages)	-	4000	-
13.3(Electric Strength at operating temperature)	-	3000	-
13.2(Leakage current at operating temperature)	-	3000	-
13(Leakage current and electric strength at operating temperature)	-	3000	-
11.3(Heating)	-	5000	-
11.2(General)	-	5000	-
11.1(General)	-	5000	-
10.2(Current input)	-	2500	-
10.1(Power input)	-	2500	-
8.1.4(Protection against live parts against protective impedance)	-	2000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	2000	-
8.1.2(Protection against live parts in openings)	-	2000	-
8.1.1(Protection against live parts in all positions)	-	2000	-
7(Marking and instructions)	-	1000	-
A.2(Earth continuity test)	-	2500	-
Annex D(Thermal motor protectors)	-	2000	-
15.2(Moisture resistance)	-	5000	-
19.17(Abnormal operation)	-	8000	-
20.1(Stability and mechanical hazards)	-	2000	-
21.2(Mechanical strength)	-	2500	-
21.3(Mechanical strength)	-	2500	-
22.5(Construction)	-	6000	-
22.6(Construction)	-	6000	-
22.11(Construction)	-	6000	-
22.16(Construction)	-	6000	-
22.42(Construction)	-	6000	-
23.3(Internal wiring)	-	2000	-
25(Supply connection and external flexible cords)	-	2500	-
25.7(Supply connection and external flexible cords)	-	2500	-
25.14(Supply connection and external flexible cords)	-	2500	-
25.15(Supply connection and external flexible cords)	-	2500	-
26.5(Terminals for external conductors)	-	2000	-
27.5(Provision for earthing)	-	2500	-
28.1(Screws and connections)	-	2000	-
B.22.1(Construction)	-	6000	-
B.22.3(Construction)	-	6000	-
B.22.4(Construction)	-	6000	-
B.22.5(Construction)	-	6000	-
18(Endurance)	-	100	-
18(Endurance)	-	100	-
9(Starting of motor operation test requirements and tests)	-	100	-
Annex C(Ageing test on motors)	-	2000	-

31 Dec, 2026

-
Included.w.e.f.24.01.2025 exclusion Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC), Cl 24 (component), 22.32 (Ageing test)

1863

EMC Testing and Compliance LLP

8141526

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.7(Marking- IS 302-1)	-	100	-
7.8(Marking- IS 302-1)	-	100	-
7.11(Marking- IS 302-1)	-	100	-
7.12(Marking- IS 302-1)	-	100	-
7.13(Marking- IS 302-1)	-	100	-
7.14(Marking- IS 302-1)	-	100	-
7.15(Marking- IS 302-1)	-	100	-
7.101(Marking)	-	100	-
8( Protection Against Electric Shock, IS 302-1)	-	100	-
10(Power Input and Current, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
11(Heating, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	100	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	100	-
14(Transient Over Voltages, IS 302-1)	-	100	-
15.1(Moisture Resistance, IS 302-1)	-	100	-
15.2(Moisture Resistance, IS 302-1)	-	100	-
15.3(Moisture Resistance, IS 302-1)	-	100	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	100	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	100	-
19.4(Abnormal Operation, IS 302-1)	-	100	-
19.4(Abnormal Operation, IS 302-1)	-	100	-
19.5(Abnormal Operation, IS 302-1)	-	100	-
19.7(Abnormal Operation)	-	100	-
19.9(Abnormal Operation)	-	100	-
19.1(Abnormal Operation)	-	100	-
19.101(Abnormal Operation)	-	100	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	100	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	100	-
21.1(Mechanical Strength, IS 302-1)	-	100	-
21.2(Mechanical Strength, IS 302-1)	-	100	-
21.101(Mechanical Strength, IS 302-2-3)	-	100	-
22(Construction, IS 302-1)	-	100	-
22.101(Construction)	-	100	-
22.102(Construction)	-	100	-
22.103(Construction)	-	100	-
22.104(Construction)	-	100	-
22.105(Construction)	-	100	-
22.106(Construction)	-	100	-
22.107(Construction)	-	100	-
23.1(Internal Wiring, IS 302-1)	-	100	-
23.2(Internal Wiring, IS 302-1)	-	100	-
23.3(Internal Wiring, IS 302-1)	-	100	-
23.4(Internal Wiring, IS 302-1)	-	100	-
23.5(Internal Wiring, IS 302-1)	-	100	-
23.6(Internal Wiring, IS 302-1)	-	100	-
23.7(Internal Wiring, IS 302-1)	-	100	-
23.8(Internal Wiring, IS 302-1)	-	100	-
23.9(Internal Wiring, IS 302-1)	-	100	-
23.10(Internal Wiring, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
26(Terminals for External Conductors, IS 302-1)	-	100	-
27.1(Provision for Earthing, IS 302-1)	-	100	-
27.2(Provision for Earthing, IS 302-1)	-	100	-
27.3(Provision for Earthing, IS 302-1)	-	100	-
27.4(Provision for Earthing, IS 302-1)	-	100	-
27.5(Provision for Earthing, IS 302-1)	-	100	-
28(Screws & Connections, IS 302-1)	-	100	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	100	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	100	-
31(Resistance of Rusting, IS 302-1)	-	100	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	100	-
4(General requirement)	-	100	-
16(Leakage current and electric strength)	-	100	-
17(Overload protection of transformers and associated circuits)	-	100	-
17(Overload protection of transformers and associated circuits)	-	100	-
17(Overload protection of transformers and associated circuits)	-	100	-
18(Endurance)	-	100	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
19(Abnormal operation)	-	100	-
25(Supply Connection and External Flexible Cords)	-	100	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	-
19.5(Abnormal Operation, IS 302-1)	-	100	-

19 Jul, 2027

-
Included w.e.f 25.03.2025 Exclusion : Cl 19.11.4.1 to Cl 19.11.4.1(EMI/EMC), Cl 24 Components

1864

GUJARAT TEST HOUSE

7109836

IS 14562 (2014)

Fire resisting computer media protection cabinets - Specification (First Revision)

FR 60 , FR 120

205000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2(Nominal Size (Declared))	-	0	-
3(Type)	-	0	-
4(Materail(Declaration))	-	0	-
5(Dimension & Tolerance - Nominal Size)	-	0	-
5(Nomina Inside dimension - Height)	-	0	-
5(Nomina Inside dimension - Width)	-	0	-
5(Nomina Inside dimension - Depth)	-	0	-
5(Heigth of Pedestal(min.))	-	0	-
6(Designation)	-	0	-
7(Construction)	-	0	-
8(Assembly)	-	0	-
9.1(Fabrication (Thickness of Internal steelsheet))	-	0	-
9.2(Shelf)	-	0	-
9.3(Door (Thickness of steel sheet))	-	0	-
9.4(Handle)	-	0	-
9.5(Compression mechanism)	-	0	-
9.6(Weight)	-	0	-
10(Sampling (Sample quantity))	-	0	-
11(Tests - Fire Resistancy)	-	0	0
11.6(Criteria for conformity -Fire Endurance test)	-	100000	-
11.6(Criteria for conformity -Fire & Impcat test)	-	100000	-
11.7(Test Report)	-	0	-
12.1(Paint-Coating thicknes)	-	2500	-
12.2(Crotch hatch test)	-	2500	-
12.3(Finish)	-	0	-
13.1(Marking)	-	0	-
13.1(Marking on keys)	-	0	-

15 Jul, 2027

-
-

1865

GUJARAT TEST HOUSE

7109836

IS 14203 (2023)

FIRE RESISTING RECORD PROTECTION CABINETS SPECIFICATION Second Revision of IS 14203

FR 60, FR 120

207000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Nominal Sizes)	-	0	-
11.2.1(The fire resisting record protection cabinets shall be considered to be conforming to the requirements of this standard, if they pass the fire endurance test (see B-3.1) and fire and impact test (see B-3.2) if the contents (see B-1.1, B-3.1.1, B-3.2.1) kept in the cabinets during the test are found usable.)	-	0	-
3 and 6 (Table 1)(Nominal Sizes - Height)	-	0	-
3 and 6 (Table 1)(Nominal Sizes - Width)	-	0	-
3 and 6 (Table 1)(Nominal Sizes - Depth)	-	0	-
3 and 6 (Table 1)(Height of Pedestal)	-	0	-
7(Designation)	-	0	-
8.1(Cabinet Construction)	-	0	-
8.2(Locking Mechanism)	-	0	-
8.3(Locks)	-	0	-
8.4(Handles)	-	0	-
9(Internal Fixtures)	-	0	-
10.1(Minimum overall thinckness of coating)	-	500	-
10.2(Cross Hatch Test)	-	500	-
11, Annex-B, 3.1(Fire Endurance Test)	-	103500	-
11, Annex-B, 3.2(Fire and Impact test)	-	103000	-

15 Jul, 2027

-
-

1866

GUJARAT TEST HOUSE

7109836

IS 15636 (2022)

Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply

Diagonal & Radial

79000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Tyre Dimensions)	-	3500	(Rs.500 included for test of marking )
4.1.1(Section width of tyre)	-	1500	-
4.1.1.2(Tyre outer diameter)	-	1500	Dimensions (Cl. 4.1.1.2)-1320
4.1.3(Section width of tyre)	-	1500	Dimensions (Cl. 4.1.3)-1320
4.1.3(Outer diameter of tyre)	-	2000	Dimensions (Cl. 4.1.3)-1320
4.2(Endurance test)	-	55000	Endurance Test (Cl. 4.2)
4.3.1(Load/Speed performance test)	-	50000	Load/Speed Performance Test (Cl. 4.3)
4,4,1(Tread -wear indicators)	-	500	Tread Wear Indicators (Cl. 4.4 )
4.4,2(Tread -wear indicators)	-	500	Tread Wear Indicators (Cl. 4.4.2)-580
4.4.4(Tread -wear indicators)	-	500	Tread Wear Indicators (Cl. 4.4.4)
4.5(Tyre strength test (Plunger rest))	-	20000	Tyre Strength Test (Plunger Test) (Cl. 4.5)
6.2.2(Technical specification-Declaration)	-	0	-
5(Marking)	-	0	-
4.1(Tyre dimension- Section Width)	-	0	-
4.1(Tyre dimension- Outer diameter)	-	0	-
4.1.1(Tread wear Indicator)	-	0	-
4.5(Tyre strength (Plunger test))	-	0	-
4.2(Endurance test-Change in diameter)	-	0	-
4.3(Load & Speed test)	-	0	-

15 Jul, 2027

-
-

1867

GUJARAT TEST HOUSE

7109836

IS 15633 (2022)

Automotive vehicles - pneumatic tyres for passenger car vehicles - diagonal and radial ply

Diagonal & Radial Ply

79000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1.1.1- Refer Annex B Col 2 and Annex D(test method )(Tyre dimensions/Section width)	-	800	Dimensions (Cl. 4.1)-800
4/4.1.1.2- Refer Annex B Col 2 and Annex D(test method )(Tyre outer diameter)	-	800	Dimensions (Cl. 4.1)-800
4/4.2.1 /4.2.2/4.2.3,Refer Annex D ,Table 13(Load/Speed Performance Test)	-	800	Load/Speed Performance Test (Cl. 4.2)-800
6.2.2,Anx-J(Technical specification-Declaration)	-	0	-
5(Marking)	-	0	-
4.1(Tyre dimension- Section Width)	-	0	-
4.1(Tyre dimension- Outer diameter)	-	0	-
4.5(Tread wear Indicator)	-	0	-
4.6(Tyre strength (Plunger test))	-	0	-
4.3(Endurance test)	-	0	-
4.2(Load & Speed test)	-	0	-
Cl. No. 5.1 (a) to 5.1 (n)(Markings)	-	0	-
4.4(Bead Unseating Resistance)	-	0	-

15 Jul, 2027

-
-

1868

GUJARAT TEST HOUSE

7109836

IS 15627 (2022)

Automotive Vehicles - Pneumatic Tyres for Two and Three - Wheeled Motor Vehicles - Specification First Revision

Radial & Diagonal

66000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1.1.1- Refer Annex C Col 2 and Annex D(test method )(Tyre dimensions/Section width)	-	2500	Testing charges include Tyre outer diameter ,section width, Marking
4.6.2 Refer Annex D(Method of measurement)(Tread Wear Indicators)	-	500	-
4.4,Refer Table 14 to 16 and Annex G(Tyre Strength Test (Plunger Test) )	-	13000	-
4.5 refer Table 17 and Annex H(Endurance Test)	-	30000	Endurance test charges,Rs.30000,is for Speed category above : P and for speed category : Up to :P, will be :Rs.35000.
4/4.2.1 /4.2.2/4.2.3,Annex E ,Table 12(Load/Speed Performance Test)	-	15000	-
4/4.3 Refer Annex F,Table 13(Dynamic Growth of~Tyres)	-	0	-
4.1(Tyre dimension- Section Width)	-	0	-
4.1(Tyre dimension- Outer diameter)	-	0	-
4.6(Tread wear Indicator)	-	0	-
4.4(Tyre strength (Plunger test))	-	0	-
4.5(Endurance test)	-	0	-
4.2(Load & Speed test)	-	0	-
5(Marking)	-	0	-
6.6.2,Anx-K(Technical specification-Declaration)	-	0	-

15 Jul, 2027

-
-

1869

GUJARAT TEST HOUSE

7109836

IS 14561 (2014)

Fire resisting (Insulating) filing cabinets - Specification (Second Revision)

Vertical/ Lateral

205000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(i) Height)	-	500	IS 14561 CL 4.1
4.1(ii) Width)	-	500	IS 14561
4.1(iii) Depth)	-	500	IS 14561
4.1(iv) Height of the bottom drawer above floor level)	-	200	IS 14561
6(Designations: The filing cabinet shall be designated by the commonly used name, type, the fire rating and the number of this Indian Standard.)	-	200	IS 14561
7.1(Outer body and Inner Box: Outer body and inner box shall be fabricated from mild steel or galvanized steel sheets of not less than 0.8 mm and not more than 1.2 mm nominal thickness. The steel shall not have any burrs or dents. If required the outer body shall be suitably stiffened to avoid bulging)	-	100	IS 14561
7.2(Cabinets Sub-Assembly: The external body and drawer fronts of the fire resisting (insulating) filing cabinet shall be of double wall type with homogeneous insulating material filled in between. Further the construction of the cabinet shall be such that each drawer slides in an individual inner box. The inner boxes shall have a insulating layer between each other to prevent fire spreading from one drawer to another. The joining of inner box, intermediate piece and outer body shall be such that, it forms a cavity to receive drawer front )	-	100	IS 14561
7.3(Filing Drawer: The drawer shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall have an arrangement on the sides suitable for the drawer suspension system and an arrangement to stop it when fully pushed in.)	-	100	IS 14561
7.3.1(Drawer Front: The drawer front shall be made from mild steel or galvanized steel sheet of not less than 0.6 mm and not more than 1.0 mm nominal thickness and shall be firmly secured to the drawer body by welding, screwing or riveting or any combination of these processes. The construction of drawer front shall be such that it snugly fits in the cavity provided for the same )	-	100	IS 14561
7.4.1(Latch: Each drawer of the cabinet shall be removable but shall be fitted with a latch/positive stop to prevent inadvertent withdrawal and rebound. Such latch shall be lifted/unlocked by the pull of the handle or any other mechanism.)	-	100	IS 14561
7.4.2(The locking mechanism shall be designed in such a manner so that there is minimum passage for direct conduction of heat from outside to inside)	-	100	IS 14561
7.5(Drawer Suspension The drawer suspension shall be either of the following types to ensure withdrawal of the full depth of the drawer: a) Ball bearing / Roller bearing suspension (Movement), b) Solid roller suspension, and c) Telescopic slide suspension (Extension)	-	100	IS 14561
7.6(Handles: Each drawer shall be provided either with a handle made from ferrous/non-ferrous material suitably coated for corrosion resistance, or any polymer and fixed to the front of the drawer or with a built in pulling mechanism)	-	100	IS 14561
7.6.1(The drawer handle shall be strong enough to take a minimum pull of 50 N for 2 min. There shall be no sharp corners or edges to avoid injury and damage to clothing)	-	2000	IS 14561
7.7.1(Locks: Top drawer shall be provided with single or dual control key lock having not less than 6 levers or pin cylinder lock having not less than 6 pins, with duplicate keys of stainless steel/nonferrous alloy. Alternatively if required by the purchaser a 3 wheel combination lock or electronic combination lock may be provided either in place of key lock or in addition to key lock)	-	100	IS 14561
7.7.2(Each drawer may also be provided with individual key lock or pin cylinder lock or combination lock subject to agreement between the purchaser and the supplier.)	-	100	IS 14561
7.8(Locking Mechanism )	-	100	IS 14561
7.8.1(The locking mechanism shall be such that when the top drawer is pushed-in fully, it actuates locking mechanism to lock all other drawers imultaneously, when they are in pushed-in position)	-	100	IS 14561
7.8.1.1(At the time of locking the cabinet, if one of the drawers is not fully pushed-in, that drawer shall remain unlocked and can be used. As soon as that drawer is pushed-in fully, it shall get locked automatically without further operation of key by the user.)	-	100	IS 14561
7.8.1.2(In addition to the above, isolation mechanism shall also be provided to permit independent locking/ use of other drawers. Such isolation mechanism provided on drawers shall be manually operated)	-	100	IS 14561
8(Assemblies)	-	100	IS 14561
8.1(The components shall be assembled by bolting, welding, riveting or by any combination of these processes)	-	100	IS 14561
8.2(All joints between outer body and inner boxes, the drawer front and the outer body shall be such that, there is minimum direct conduction of heat from outer body to inner body)	-	100	IS 14561
9.1(Drawer Suspension Test and Latch Test: The drawer loaded with evenly distributed load of 30 kg (excluding the weight of drawer) in any drawer shall be operated for 5 000 cycles at a rate of 300 cycles/h ±10 percent. One opening and one closing shall constitute one cycle. The test shall be carried out with maximum two breaks by using electrically or mechanically operated test equipment with a counter fitted on it. After 5 000 cycles the suspension slide and latch mechanism shall not show any apparent distortion, cracks, or failures to operate in a normal smooth manner)	-	10500	IS 14561
10.1(Finish: All dents, burrs and sharp edges shall be removed from the various components and they shall be thoroughly degreased and cleaned of rust and scale)	-	100	IS 14561
10.2(The inside and outside surfaces of the fire resisting (Insulating) filing cabinet shall be painted or powder coated. In case of paint, an appropriate primer and undercoating shall be used in accordance to industry practices. The minimum overall thickness of the coatings shall be 50 μ for powder coating and 70 μ for liquid paint. Cross hatch test shall be conducted to confirm the adhesion of coating in accordance with 10.2.1)	-	200	IS 14561
10.2.1(Cross Hatch Test)	-	300	IS 14561
11.1(Fire endurance test)	-	105000	IS 14561
11.2(Fire and impact test)	-	100000	IS 14561
12.1(Marking of Cabinets:A metal plate showing classification of cabinet together with the manufacturer’s name, serial number and the year of manufacture shall be fixed inside surface of the top drawer of the cabinet in such a way that it is visible when it is opened.)	-	100	IS 14561
12.2(Marking on Keys: The keys shall bear an identification number which shall not be the same as the serial number of the cabinet)	-	100	IS 14561

15 Jul, 2027

-
-

1870

GUJARAT TEST HOUSE

7109836

IS 13098 (2012)

Automotive vehicles - Tubes for pneumatic tyres - Specification (First Revision)

Class A , Class B

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3/3.1 (for valve refer IS 9081)(MATERIALS, FORM AND FIT)	-	150	Dimension
3/3.3(Uniformity(The Thickness shall not vary from the arithmetic mean of the readings by ± 17.5 % at any point in longitudinal direction :-Crown centre,Base centre,Side wall - 1,Side wall - 2))	-	400	Thickness variation
4/4.1.1(Elongation at break (Class A' Tubes))	-	600	Elongation
4/4.1.2( Strength of Splice (Class A' Tubes))	-	600	Strength of splice
4/4.1.3 Refer annex B(Set After Ageing(Class A' Tubes))	-	2800	Set after agening
4/4.1.4 Refer annex C(Accelerated Ageing(Both Class A and Class B))	-	2800	accelerated agening
5(AIR TIGHTNESS)	-	150	Air tightness

15 Jul, 2027

-
-

1871

GUJARAT TEST HOUSE

7109836

IS 11188 : Part 1 (2021)

Vault Strong Room doors Part 1 specification

C, B, A, AA, AAA

307000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(DIMENSIONS)	-	500	-
5 Table 1(i) Door Type)	-	50	-
5 Table 1(ii) Overall dimension of vault door)	-	50	-
5 Table 1( a) Height,H)	-	50	-
5 Table 1( b) Width W)	-	50	-
5 Table 1(iii) Inside dimension or clear opening when door shutters are swung open at 180 degree)	-	50	-
5 Table 1( a) Height H, Min b) Width W, Min iv) a) Thickness of door frame angle, channel or section made out of M.S. plates, if built up to form a channel,Min )	-	50	-
5 Table 1( b) Thickness of door frame, if fabricated from single plate to form channel/multi-bend section, Min)	-	50	-
5 Table 1( v) Dimension of the rebate coming under shear)	-	50	-
5 Table 1( vi) Thickens of grill gate angles or section made out of M.S. plates, Min)	-	50	-
5 Table 1( vii) Diameter of grill gate rods, Min)	-	50	-
5 Table 1( viii) Pitch of grill gate rods)	-	50	-
5 Table 1(ix) Thickness of doors slab, thickness over rebate)	-	50	-
5 Table 1(xi) Thickness of drill and oxyacetylene torch resisting layer (excluding mild steel plates),Min)	-	50	-
5 Table 1(xii) Wall thickness (recommendation))	-	50	-
5 Table 1(xiii) Number of locks)	-	50	-
5 Table 1(xiv) Number of shooting bolts on hinge side, Min)	-	50	-
5 Table 1(xv) Number of shooting bolts on opposite side,Min)	-	50	-
5 Table 1(xvi) Number of shooting bolts at top,Min)	-	50	-
5 Table 1(xviii) Diameter of shooting bolts, Min)	-	50	-
5 Table 1( cross sectional area, Min,sq mm)	-	50	-
5 Table 1(xix) Depth of engagement of shooting)	-	50	-
5 Table 1( bolts, Min)	-	50	-
8( CONSTRUCTION AND GENERALREQUIREMENTS)	-	100	-
8.1 Fig. 1( Doors )	-	50	-
8.1.1( Ventilating Grill Gate (Inside))	-	50	-
8.1.2( Main Door (Outside))	-	50	-
8.2(Doors Frame)	-	50	-
8.2.1 (Rebate of the Door Frame)	-	50	-
8.2.2 (Compression Mechanism)	-	50	-
8.2.3 (Crane Hinge Mechanism)	-	50	-
8.3(Locking Mechanism)	-	50	-
8.3.1( Lock Case)	-	50	-
8.3.2 (Bolt Work)	-	50	-
8.3.2.1 Table 1.(The number of bolts and their minimum dimension)	-	50	-
8.3.2.2( Construction)	-	50	-
8.4(Lock)	-	50	-
8.4.4( Time Lock)	-	50	-
8.4.5 (Automatic Relocking Device)	-	50	-
9( DOOR FITTINGS)	-	50	-
9.1(Hinges)	-	50	-
9.1.1( Adjusting Bolt)	-	50	-
9.2( Handles)	-	50	-
9.3( Foot Bridge)	-	50	-
9.4( Vault Lighting Control)	-	50	-
10(FINISH)	-	50	-
10.3( Cross Hatch Test)	-	50	-
10.4(Alternate to Cl 10.4)	-	50	-
11(Burglary resistance IS 11188 (Part 2))	-	107000	#Note :Class-B :Rs.72000, Class-C:Rs.56000, Class-A:Rs.100000, Class-AA:Rs.150000, Class-AAA:Rs.190000.
IS 11188 (Part 2), 3.1 and 3.2( i)Net Working time, Minutes)	-	72000	#Note : As above (Burglary resistance test)
IS 11188 (Part 3) Cl4.4(Fire endurance IS 11188 (Part 3))	-	110000	Fire Endurance
IS 11188 (Part 3) Cl 4.5(Fire and stream hose IS 11188 (Part 3))	-	120000	Fire & stream hose
11.1 (3)(Fire and stream hose IS 11188 (Part 3))	-	100000	-
11.1 (2)(Fire endurance IS 11188 (Part 3))	-	100000	-
11.1 (1)(Burglary resistance IS 11188 (Part 2))	-	0	-
10.4(Alternate to Cl 10.4)	-	0	-
10.3(Cross Hatch Test)	-	0	-
10(FINISH)	-	0	-
9.4(Vault Lighting Control)	-	0	-
9.3(Foot Bridge)	-	0	-
9.2(Handles)	-	0	-
9.1.1(Adjusting Bolt)	-	0	-
9.1(Hinges)	-	0	-
9(DOOR FITTINGS)	-	0	-
8.4.5(Automatic Relocking Device)	-	0	-
8.4.4(Time Lock)	-	0	-
8.4(Lock)	-	0	-
8.3.2.2(Construction)	-	0	-
8.3.2.1(The number of bolts and their minimum dimension)	-	0	-
8.3.2(Bolt Work)	-	0	-
8.3.1(Lock Case)	-	0	-
8.3(Locking Mechanism)	-	0	-
8.2.3(Crane Hinge Mechanism)	-	0	-
8.2.2(Compression Mechanism)	-	0	-
8.2.1(Rebate of the Door Frame)	-	0	-
8.2(Doors Frame)	-	0	-
8.1.2(Main Door (Outside))	-	0	-
8.1.1(Ventilating Grill Gate (Inside))	-	0	-
8.1 Fig. 1(Doors)	-	0	-
8(CONSTRUCTION AND GENERALREQUIREMENTS)	-	0	-
5 Table 1(bolts, Min)	-	0	-
5 Table 1(xix) Depth of engagement of shooting)	-	0	-
5 Table 1(cross sectional area, Min,sq mm)	-	0	-
5 Table 1(xviii) Diameter of shooting bolts, Min)	-	0	-
5 Table 1(xvi) Number of shooting bolts at top,Min)	-	0	-
5 Table 1(xv) Number of shooting bolts on opposite side,Min)	-	0	-
5 Table 1(xiv) Number of shooting bolts on hinge side, Min)	-	0	-
5 Table 1(xiii) Number of locks)	-	0	-
5 Table 1(xii) Wall thickness (recommendation))	-	0	-
5 Table 1(xi) Thickness of drill and oxyacetylene torch resisting layer (excluding mild steel plates),Min)	-	0	-
5 Table 1(ix) Thickness of doors slab, thickness over rebate)	-	0	-
5 Table 1(viii) Pitch of grill gate rods)	-	0	-
5 Table 1(vii) Diameter of grill gate rods, Min)	-	0	-
5 Table 1(vi) Thickens of grill gate angles or section made out of M.S. plates, Min)	-	0	-
5 Table 1(v) Dimension of the rebate coming under shear)	-	0	-
5 Table 1(iv (b) Thickness of door frame, if fabricated from single plate to form channel/multi-bend section, Min)	-	0	-
5 Table 1(ii (a) Height H, Min b) Width W, Min iv(a) Thickness of door frame angle, channel or section made out of M.S. plates, if built up to form a channel,Min)	-	0	-
5 Table 1(iii) Inside dimension or clear opening when door shutters are swung open at 180 degree)	-	0	-
5 Table 1(ii (b) Width W)	-	0	-
5 Table 1(ii (a) Height, H)	-	0	-
5 Table 1(ii) Overall dimension of vault door)	-	0	-
5 Table 1(i) Door Type)	-	0	-
6(Materail)	-	0	-
7(Classification)	-	0	-
8.1.1.1(Locking device (unpickable dual control lock))	-	0	-
8.1.2(Main Door- Outer & inner plate thickness)	-	0	-
8.1.2.1(Door(Finish &Gap of frame/edge with any place))	-	0	-
8.3.2.3(Bearing piller)	-	0	-
8.4.1(Shooting bolt control (By lock))	-	0	-
8.4.2(Test of key-Lock)	-	0	-
10 &10.1(Dents,Burrs & Edges)	-	0	-
10.2(Colour coating thickness (Surafce paint))	-	0	-
12(Marking of door)	-	0	-
12.2(Marking on keys)	-	0	-

15 Jul, 2027

-
-

1872

GUJARAT TEST HOUSE

7109836

IS 5244 (2020)

Safe Deposit Locker Cabinets — Specification ( Fourth Revision )

1, 1A, 2, 2A, 3, 4

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1( Types )	-	100	-
Cl. 6 (Fig-5)(Cabinet Size (in mm))	-	1500	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1500	-
Table 1(Finish)	-	500	Thickness coating (in micron)
Cl. 7.1(Design and Manufacture)	-	100	-
Cl. 7.2(Design and Manufacture)	-	100	-
Cl. 7.3(Design and Manufacture)	-	100	-
Cl. 7.4(Design and Manufacture)	-	100	-
Cl. 7.5(Design and Manufacture)	-	100	-
Cl. 7.6(Design and Manufacture)	-	100	-
Cl. 8(Workmanship)	-	100	-
Cl. 8.2(Tolerance)	-	100	-
Cl. 9.1(Testing)	-	15000	-
Cl. 9.2(Testing)	-	100	-
Cl. 9.3(Cross Hatch Test)	-	10000	-
Cl. 10.1(Marking)	-	100	-
Cl. 10.4(Marking on Keys)	-	100	-

15 Jul, 2027

-
-

1873

GUJARAT TEST HOUSE

7109836

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

BWP/ MR,Decorative type / Commercial type,Thickness mm

6300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	100	surface defects
7.3(Dimensional Requirements - Length - 8.1.4)	-	20	Length
7.3(Dimensional Requirements - Width - 8.1.4)	-	20	Width
7.3(Dimensional Requirements - Thickness - Annexure E)	-	20	Thickness
7.3(Dimensional Requirements - Squareness - Annexure D)	-	20	Squareness
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	20	Straightness
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	250	Local planesness -Dim.stability
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	250	Delamination- Dim.stability
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	250	at 90 -Thickness change-Dim.stablity
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	250	at 40 - Thickness change-Dim.changes
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	250	at 40 length changes-Dim.stablity
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	250	at 90 length changes-Dim.stability
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	250	for MR Grade
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	250	For BWP Grade -
9.2.3(Adhesion of Plies - Annexure H)	-	100	Adhesion of Ply
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	1000	For MR Grade only
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	250	MOR -Minimum
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	250	MOR -Average
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	250	MOE - Minimum
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	250	MOE -Average
9.2.6(Spot test - Annexure L)	-	2000	Spot test
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	0	-
cl. 11(marking)	-	0	-
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	0	-

15 Jul, 2027

-
-

1874

GUJARAT TEST HOUSE

7109836

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

MR,BWR,BWP

6200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 Table (i)(MR (Moisture Ressistant))	-	1200	Cyclic test for MR Grade
4 Table (i)(BWR (Boiling Water Resistant))	-	2000	Cyclic test for BWR Grade
4 Table (i)(BWP (BOiling WaterProof))	-	3000	Cyclic test for BWP Grade
5,7.4(Keeping Quality (Resistance to heat Polymerization))	-	0	-
7.4(Acidity and Alkalinity ( pH))	-	0	-

15 Jul, 2027

-
-

1875

GUJARAT TEST HOUSE

7109836

IS 550 : Part 1 (2022)

Safes: Part 1 specification Fifth Revision

Double Door/ Single Door

265000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4 Table 1(CLASSIFICATIONS)	-	205000	Rs.25000 for Dimension &other reqiurments+Rs35000 for Burglary test +Rs.85000 for Fire endurance test+Rs.85000 for Fire & Impact test for Class: C/CC/CCC.
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	100	-
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	100	-
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	100	-
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	100	-
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	100	-
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	100	-
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	100	-
Cl. 5 Table 10(DIMENSIONS AND SIZES)	-	100	-
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	100	-
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	100	-
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	100	-
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	100	-
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	100	-
Cl. 6 Table 3(Material)	-	100	-
Cl. 7 (DESIGNATIONS)	-	100	-
Cl. 8.1(Body)	-	100	-
Cl. 8.3(Door)	-	100	-
Cl. 8.4.1(Hinges)	-	100	-
Cl. 8.4.2(Bolts)	-	100	-
Cl. 8.5 Table 3(Handles)	-	100	-
Cl. 8.6.1(Locks (Type))	-	100	-
Cl. 8.6.1.1(Locks (Type))	-	100	-
Cl. 8.6.2(Locks (Levers))	-	100	-
Cl. 8.6.3(Tests for locks)	-	100	-
Cl. 8.6.4(Keys)	-	100	-
Cl. 8.6.5(Unpickability)	-	100	-
Cl. 8.6.6(Non-interchangeability)	-	100	-
Cl. 8.7(Automatic Relocking Device)	-	100	-
Cl. 9(INTERNAL FIXTURES)	-	100	-
Cl. 10(Painting)	-	100	-
Cl. 10(Painting)	-	100	-
Cl. 11.1(Marking of Safes)	-	100	-
Cl. 11.2( Marking on Keys)	-	100	-
4(Classification)	-	0	-
5.1(Dimensions)	-	0	-
5.2(Sizes)	-	0	-
5.2(Table-2)(Inside dimensions)	-	0	-
5.2(Table-2)(Tolerance on inside dimensions)	-	0	-
5.2(Table-2)(Internal volume)	-	0	-
5.2(Table-2)(Tolerance on interanal volume)	-	0	-
5.2(Table-2)(Minumum Weight)	-	0	-
5.2(Table-2)(Thickness of Plates (outer bodys& Door))	-	0	-
5.2(Table-2)(Thickness of Door slab)	-	0	-
5.2(Table-2)(Thickness of door overbolt work)	-	0	-
5.2(Table-2)(Number of lock on the door)	-	0	-
5.2(Table-2)(Any other type of lock)	-	0	-
5.2(Table-2)(Number of bolt on hinge side)	-	0	-
5.2(Table-2)(Number of bolt on opposite hinge)	-	0	-
5.2(Table-2)(No.of bolt at the top)	-	0	-
5.2(Table-2)(No.of bolt at the bottom)	-	0	-
5.2(Table-2)(Size of each bolt (area of bolt section))	-	0	-
5.2(Table-2)(Depth engagement of bolt)	-	0	-
6(Material declaration)	-	0	-
7(Desigantion-Delaration)	-	0	-
8.1(Body (Construction & workmanship))	-	0	-
8.2(Door (Gap))	-	0	-
8.4.1(Hinges)	-	0	-
8.4.2(Bolts)	-	0	-
8.5(Handle)	-	0	-
8.6.1(Lock (key type) Garde)	-	0	-
8.6.1(Lock (key type)classification)	-	0	-
8.6.1(Lock (key type)construction)	-	0	-
8.6.1(Lock(key type) leaver thickness)	-	0	-
8.6.1(Lock (key type)Material)	-	0	-
8.6.1(Lock (key type)corrosion protection materail)	-	0	-
8.6.1(Lock(key type) -Endurance test)	-	0	-
8.6.1(Lock(key type)-Bolt forcing test)	-	0	-
8.6.1(Lock(key type)-key strength test)	-	0	-
8.6.1(Lock(key type) -Marking)	-	0	-
8.6.1(Lock(Key type) -Key Marking)	-	0	-
8.6.1(Mechanical combination lock -Classification)	-	0	-
8.6.1(Mechanical combination lock -Construction)	-	0	-
8.6.1(Mechanical combination lock -Metallic parts)	-	0	-
8.6.1(Mechanical combination lock -Corrosion Prot)	-	0	-
8.6.1(Mechanical combination lock -Operation test)	-	0	-
8.6.1(Mechanical cmbination lock -Manipulation)	-	0	-
8.6.1(Mechanical combination lock -Punching attack)	-	0	-
8.6.1(Mechanical combination lock -Endurance test)	-	0	-
8.6.1(Mechanical combination lock-Salt spary test)	-	0	-
8.6.1(Mechanical combination lock-Strength test)	-	0	-
8.6.1(Mechanical combination lock-Aging-stress Dist)	-	0	-
8.6.1(Mechanical combination lock-Moisture Absorp)	-	0	-
8.6.1(Mechanical combination lock-Vibration test)	-	0	-
8.6.1(Mechanical combination lock-Marking)	-	0	-
8.6.1(Any other lock)	-	0	-
8.6.4(Lock Bolt engagement)	-	0	-
8.6.5(Additional provision- retrofitting time lock)	-	0	-
8.7(Automatic re-locking device)	-	0	-
8.8(Cable hole size)	-	0	-
9(Internal fixture)	-	0	-
10(Painting)	-	0	-
10.1(Cross hatch test)	-	0	-
11.1(Marking of safe)	-	0	-
12(Burglary attack)	-	100000	-
12(Fire Resistance)	-	165000	-

15 Jul, 2027

-
-

1876

GUJARAT TEST HOUSE

7109836

IS 303 (1989)

Plywood for General Purposes -

BWR/MR, AA/AB/BB

3050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Squareness - Annexure C)	-	20	Squareness
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	100	Quality requirement
5.1(Type - For AA Type)	-	40	AA
5.1(Type - For BB Type)	-	30	BB
5.1(Type - For AB Type)	-	30	AB
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	20	Thickness
8(Dimensions & Tolerances - Length - Cl. 8)	-	20	Length
8(Dimensions & Tolerances - Width - Cl. 8)	-	20	Width
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	20	Edge Straightness
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	50	Workmanship
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	50	Workmanship
11.3(Moisture Content - Part 1 of IS 1734)	-	150	Moisture contnent
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	250	MR
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	250	BWR
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1000	Mycological
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	125	MOR -Along-Avg.
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	125	MOR-Along-Min.
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	125	MOR-Across-Avg
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	125	MOR-Across-Min
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	125	MOE-Along-Avg
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	125	MOE-Along-Min
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	125	MOE-Across-Avg.
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	125	MOE-Across-Min

15 Jul, 2027

-
-

1877

Bharat Test House Pvt. Ltd.

9168306

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Shell)	-	100	-
3.2(Harness)	-	100	-
3.3(Metal Parts)	-	800	-
4.1(Sizes)	-	100	-
5.1(Shell)	-	200	-
5.2(Harness)	-	100	-
5.3(Chin Strap or Nape Strap)	-	100	-
5.4(Lamp Bracket)	-	100	-
5.5(Cable Clip)	-	100	-
6.1(Workmanship & Finish)	-	100	-
7.1(Mass)	-	200	-
8.1(Shock Absorption Resistance)	-	1200	-
8.2(Penetration Resistance)	-	1200	-
8.3(Flamability Resistance)	-	1000	-
8.4(Electrical Resistance)	-	1000	-
8.5(Water Absorption)	-	800	-
8.6(Heat Resistance)	-	800	-
3.1(Shell)	-	0	-
3.2(Harness)	-	0	-
3.3(Metal Parts)	-	0	-
4.1(Sizes)	-	0	-
5.1(Shell)	-	0	-
5.2(Harness)	-	0	-
5.3(Chin Strap or Nape Strap)	-	0	-
5.4(Lamp Bracket)	-	0	-
5.5(Cable Clip)	-	0	-
6.1(Workmanship & Finish)	-	0	-
7.1(Mass)	-	0	-
8.1(Shock Absorption Resistance)	-	0	-
8.2(Penetration Resistance)	-	0	-
8.3(Flamability Resistance)	-	0	-
8.4(Electrical Resistance)	-	0	-
8.5(Water Absorption)	-	0	-
8.6(Heat Resistance)	-	0	-
5.2.1(Head Band)	-	0	-
5.3.1(Chin Strap)	-	0	-
5.3.2(Nape Strap)	-	0	-

26 Jul, 2027

-
Included w.e.f 09.04.2025

1878

IEC TEST LABS LLP

8165726

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	600	-
6(Classification)	-	600	-
11.8(Temperature rise)	-	600	-
11.7(Duration corresponding)	-	600	-
11.6(Combined appliances)	-	600	-
11.5(Motor-operated appliances)	-	600	-
11.4(Heating appliances)	-	600	-
8.1.5(Live parts of built-in appliances)	-	600	-
18(Endurance)	-	600	-
17(Overload protection of transformers and associated circuits)	-	600	-
16(Leakage current and electric strength)	-	600	-
4(General requirement)	-	600	-
32(Radiation Toxicity and Similar Hazards)	-	600	-
31(Resistance to Rusting)	-	600	-
30.2(Needle Flame Test)	-	600	-
30.2(Glow Wire Test)	-	600	-
30.1(Ball pressure test)	-	600	-
29(clearance, creepage distances and solid insulation)	-	600	-
28(Screw test and connections)	-	600	-
27(Provision for earthing)	-	600	-
26(Terminals for external conductors)	-	600	-
25(Supply connection and external flexible cords)	-	600	-
24(Components)	-	600	-
23(Internal wiring)	-	600	-
22(Construction)	-	600	-
21(Mechanical Strength)	-	600	-
20(Stability and mechanical hazards)	-	600	-
19(Abnormal Operation)	-	600	-
18(Endurance)	-	600	-
17(Over Load Protection of Transformers and associated circuits)	-	600	-
16.3(Electric Strength (after clause 15 and 16.2))	-	600	-
16.2(Leakage Current (after Clause 15))	-	600	-
16.1(General)	-	600	-
15.3(Humidity Test)	-	600	-
15.2(Spillage Test)	-	600	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	600	-
15.0(Moisture resistance)	-	600	-
14(Transient Over Voltages)	-	600	-
13.3(Electric Strength at operating temperature)	-	600	-
13.2(Leakage current at operating temperature)	-	600	-
13(Leakage current and electric strength at operating temperature)	-	600	-
11.3(Heating)	-	600	-
11.2(General)	-	600	-
11.1(General)	-	600	-
10.2(Current input)	-	600	-
10.1(Power input)	-	600	-
9(Starting of motor operation test requirements and tests)	-	600	-
8.1.4(Protection against live parts against protective impedance)	-	700	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	600	-
8.1.2(Protection against live parts in openings)	-	600	-
8.1.1(Protection against live parts in all positions)	-	600	-
7(Marking and instructions)	-	600	-
A.2(Earth continuity test)	-	700	-
Annex C(Ageing test on motors)	-	600	-
Annex D(Thermal motor protectors)	-	600	-
19.17(Abnormal operation)	-	600	-
20.1(Stability and mechanical hazards)	-	600	-
21.2(Mechanical strength)	-	700	-
21.3(Mechanical strength)	-	600	-
22.5(Construction)	-	700	-
22.6(Construction)	-	600	-
22.11(Construction)	-	700	-
22.16(Construction)	-	600	-
22.32(Construction)	-	700	-
22.42(Construction)	-	600	-
23.3(Internal wiring)	-	700	-
25.7(Supply connection and external flexible cords)	-	700	-
25.14(Supply connection and external flexible cords)	-	600	-
25.15(Supply connection and external flexible cords)	-	700	-
26.5(Terminals for external conductors)	-	600	-
27.5(Provision for earthing)	-	700	-
28.1(Screws and connections)	-	600	-
B.22.1(Construction)	-	700	-
B.22.3(Construction)	-	600	-
B.22.4(Construction)	-	600	-
B.22.5(Construction)	-	700	-
19.11.4.4(Surge immunity test)	-	600	-
5(General conditions for the tests)	-	700	-
25(Supply connection and external flexible cords)	-	600	-
16.0(General)	-	700	-
15.2(Moisture resistance)	-	600	-

07 Sep, 2026

-
Included w.e.f.25.03.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC)

1879

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 204 : Part 1 (1991)

Tower bolts - Specification: Part 1 ferrous metals (Fifth Revision)

All

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Carbon - IS 228)	-	1500	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Manganese - IS 228)	-	1500	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Phosphorus - IS 228)	-	1500	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Sulphur - IS 228)	-	1500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Carbon - IS 228)	-	1500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Manganese - IS 228)	-	1500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Sulphur - IS 228)	-	1500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Phosphorus - IS 228)	-	1500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Silicon - IS 228)	-	1500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Carbon Equivalen(CE) - IS 228)	-	1500	-
4 -Table 5- iii (Ref. Cl 6.1 of IS 210 : 2009)(Chemical composition - Sulphur and/or Phosphorous)	-	1500	-
4 -Table 5- iii (Ref. Cl 9.1 of IS 210 : 2009)(The microstructure shall be substantially free of primary cementite and/ or massive stead ite and shall consist oftlake graphite in a matrix offerrite or pearlite or mixture thereof.)	-	2500	-
4 -Table 5- iii (Ref. Cl 9.1.1 of IS 210 : 2009)(Graphite structute Distribution - IS 7754)	-	2500	-
5.1(General)	-	0	-
5.2.1 Table 1(Particulars-Barrel Tower Bolts)	-	0	-
5.2.2 Table 2(Particulars-Sami Barrel Tower Bolts)	-	0	-
5.2.3 Table 3(Particulars-Riveted or Spot Welded Tower Bolts)	-	0	-
5.2.4 Table 4(Particulars-Skeleton Tower Bolts)	-	0	-
6.1- Table 1(Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-	1000	-
6.1- Table 1(Dimension of Barrel tower bolts-Minimum No. of equally Spaced Screw holes in Barrel and Socket for wood screw no 6)	-	1000	-
6.2- Table 2(Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G )	-	1000	-
6.2- Table 2(Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-	1000	-
6.3- Table 3(Dimension of Riveted or Spot Welded Tower Bolts- 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7. Length of Strap-E" 8.Thickness of Back Plate -F 9.Thickness of Socket or Upper Plate and Strap- F" 10.Dia of bore of Bolt Plate or socket- G 11. Length of Alternative Socket-H )	-	1000	-
6.3- Table 3(Dimension of Riveted or Spot Welded Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-	1000	-
6.4- Table 4(Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Staple -F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob-J)	-	1000	-
6.4- Table 4(Dimension of Skeleton Tower Bolts- Nos of Staples)	-	1000	-
6.4- Table 4(Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 6)	-	1000	-
8.1(MARKING- .)	-	500	-
8.1.1,(MARKING- )	-	500	-
9(PACKING)	-	0	-
7(Finish)	-	500	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Carbon - IS 228)	-	0	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Manganese - IS 228)	-	0	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Phosphorus - IS 228)	-	0	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Sulphur - IS 228)	-	0	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Carbon - IS 228)	-	0	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Manganese - IS 228)	-	0	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Sulphur - IS 228)	-	0	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Phosphorus - IS 228)	-	0	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Silicon - IS 228)	-	0	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Carbon Equivalen(CE) - IS 228)	-	0	-
4 -Table 5- iii (Ref. Cl 6.1 of IS 210 : 2009)(Chemical composition - Sulphur and/or Phosphorous)	-	0	-
4 -Table 5- iii (Ref. Cl 9.1 of IS 210 : 2009)(The microstructure shall be substantially free of primary cementite and/ or massive stead ite and shall consist oftlake graphite in a matrix offerrite or pearlite or mixture thereof.)	-	0	-
4 -Table 5- iii (Ref. Cl 9.1.1 of IS 210 : 2009)(Graphite structute Distribution - IS 7754)	-	0	-
5.1(General)	-	0	-
5.2.1 Table 1(Particulars-Barrel Tower Bolts)	-	0	-
5.2.2 Table 2(Particulars-Sami Barrel Tower Bolts)	-	0	-
5.2.3 Table 3(Particulars-Riveted or Spot Welded Tower Bolts)	-	0	-
5.2.4 Table 4(Particulars-Skeleton Tower Bolts)	-	0	-
6.1- Table 1(Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-	0	-
6.1- Table 1(Dimension of Barrel tower bolts-Minimum No. of equally Spaced Screw holes in Barrel and Socket for wood screw no 6)	-	0	-
6.2- Table 2(Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G )	-	0	-
6.2- Table 2(Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-	0	-
6.3- Table 3(Dimension of Riveted or Spot Welded Tower Bolts- 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7. Length of Strap-E" 8.Thickness of Back Plate -F 9.Thickness of Socket or Upper Plate and Strap- F" 10.Dia of bore of Bolt Plate or socket- G 11. Length of Alternative Socket-H )	-	0	-
6.3- Table 3(Dimension of Riveted or Spot Welded Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-	0	-
6.4- Table 4(Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Staple -F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob-J)	-	0	-
6.4- Table 4(Dimension of Skeleton Tower Bolts- Nos of Staples)	-	0	-
6.4- Table 4(Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 6)	-	0	-
8.1(MARKING- .)	-	0	-
8.1.1,(MARKING- )	-	0	-
9(PACKING)	-	0	-
7(Finish)	-	0	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Carbon - IS 228)	-	1500	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Manganese - IS 228)	-	1500	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Phosphorus - IS 228)	-	1500	-
4 -Table 5- i (Ref. Cl 7, Table 3, HR1 grade of IS 1079 : 2017)(Chemical composition - Sulphur - IS 228)	-	1500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Carbon - IS 228)	-	1500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Manganese - IS 228)	-	1500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Sulphur - IS 228)	-	1500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Phosphorus - IS 228)	-	1500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Silicon - IS 228)	-	1500	-
4 -Table 5- ii (Ref. Cl 5, Table 1, E300-C grade of IS 2062 : 2011)(Chemical composition - Carbon Equivalen(CE) - IS 228)	-	1500	-
4 -Table 5- iii (Ref. Cl 6.1 of IS 210 : 2009)(Chemical composition - Sulphur and/or Phosphorous)	-	1500	-
4 -Table 5- iii (Ref. Cl 9.1 of IS 210 : 2009)(The microstructure shall be substantially free of primary cementite and/ or massive stead ite and shall consist oftlake graphite in a matrix offerrite or pearlite or mixture thereof.)	-	2500	-
4 -Table 5- iii (Ref. Cl 9.1.1 of IS 210 : 2009)(Graphite structute Distribution - IS 7754)	-	2500	-
5.1(General)	-	0	-
5.2.1 Table 1(Particulars-Barrel Tower Bolts)	-	0	-
5.2.2 Table 2(Particulars-Sami Barrel Tower Bolts)	-	0	-
5.2.3 Table 3(Particulars-Riveted or Spot Welded Tower Bolts)	-	0	-
5.2.4 Table 4(Particulars-Skeleton Tower Bolts)	-	0	-
6.1- Table 1(Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-	1500	-
6.1- Table 1(Dimension of Barrel tower bolts-Minimum No. of equally Spaced Screw holes in Barrel and Socket for wood screw no 6)	-	1500	-
6.2- Table 2(Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G )	-	1500	-
6.2- Table 2(Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-	1500	-
6.3- Table 3(Dimension of Riveted or Spot Welded Tower Bolts- 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7. Length of Strap-E" 8.Thickness of Back Plate -F 9.Thickness of Socket or Upper Plate and Strap- F" 10.Dia of bore of Bolt Plate or socket- G 11. Length of Alternative Socket-H )	-	1500	-
6.3- Table 3(Dimension of Riveted or Spot Welded Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-	1500	-
6.4- Table 4(Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Staple -F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob-J)	-	1500	-
6.4- Table 4(Dimension of Skeleton Tower Bolts- Nos of Staples)	-	1500	-
6.4- Table 4(Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 6)	-	1500	-
8.1(MARKING- .)	-	0	-
8.1.1,(MARKING- )	-	0	-
9(PACKING)	-	0	-
7(Finish)	-	500	-

10 Mar, 2027

-
Included w.e.f 20.05.2025

1880

SIIR, Delhi Shriram Institute For Industrial Research

8102006

IS 17079 (2019)

Rubber modified bitumen (Rmb) ? specification

Type A-NRMB70 , NRMB40 , & Type B CRMB 55 , CRMB 60

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Material and Manufacture)	-	7000	30% Discount
6.2(Homogeneity)	-	2000	30% Discount
6.4(De-mixing of Modifier)	-	2000	30% Discount
"clause no 6.5 table no-1 sl no-1"("Penetration at 25°C ")	-	2000	30% Discount
"clause no 6.5 table no-1 sl n0-2"(Softening point (R and B))	-	2000	30% Discount
"clause no 6.5 table no-1 sl no-3"(Flash point, COC)	-	2000	30% Discount
"clause no 6.5 table no-1 sl no-4"("Elastic recovery of half thread in ductilometer at 15°C")	-	2000	30% Discount
"clause no 6.5 table no-1 sl no-5"("Complex modulus as (G*/Sin) as Min 1.0 kPa at 10 rad/s")	-	40000	30% Discount
"clause no 6.5 table no-1 sl no-6"(Separation, difference in softening point (R&B))	-	5000	30% Discount
"clause no 6.5 table no-1 sl no-7"(Viscosity at 150°C)	-	3000	30% Discount
"clause no 6.5 table no-2 sl no-1"(Loss in mass)	-	2000	30% Discount
"clause no 6.5 table no-2 sl no-2"(Change in Softening Point)	-	2000	30% Discount
"clause no 6.5 table no-2 sl no-3"(Reduction in penetration of residue at 25°C)	-	2000	30% Discount
"clause no 6.5 table no-2 sl no-4"(Elastic recovery of half thread in ductilometer at 25°C, percent)	-	2000	30% Discount
"clause no 6.5 table no-2 sl no-5"(Complex modulus as (G*/Sin) as Min 2.2 kPa at 10 rad/s)	-	40000	30% Discount
6.1(Material and Manufacture)	-	0	-
6.2(Homogeneity)	-	0	-
6.4(De-mixing of Modifier)	-	0	-
"clause no 6.5 table no-1 sl no-1"("Penetration at 25°C ")	-	0	-
"clause no 6.5 table no-1 sl n0-2"(Softening point (R and B))	-	0	-
"clause no 6.5 table no-1 sl no-3"(Flash point, COC)	-	0	-
"clause no 6.5 table no-1 sl no-4"("Elastic recovery of half thread in ductilometer at 15°C")	-	0	-
"clause no 6.5 table no-1 sl no-5"("Complex modulus as (G*/Sin) as Min 1.0 kPa at 10 rad/s")	-	0	-
"clause no 6.5 table no-1 sl no-6"(Separation, difference in softening point (R&B))	-	0	-
"clause no 6.5 table no-1 sl no-7"(Viscosity at 150°C)	-	0	-
"clause no 6.5 table no-2 sl no-1"(Loss in mass)	-	0	-
"clause no 6.5 table no-2 sl no-2"(Change in Softening Point)	-	0	-
"clause no 6.5 table no-2 sl no-3"(Reduction in penetration of residue at 25°C)	-	0	-
"clause no 6.5 table no-2 sl no-4"(Elastic recovery of half thread in ductilometer at 25°C, percent)	-	0	-
"clause no 6.5 table no-2 sl no-5"(Complex modulus as (G*/Sin) as Min 2.2 kPa at 10 rad/s)	-	0	-

31 Dec, 2026

-
Included w.e.f 03.03.2025 Exclusion : Cl 6.3 Mineral Matter

1881

VERTEX TESTING LABORATORY PRIVATE LIMITED

8185906

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

10 mm & 20 mm/Crushed & Uncrushed / coarse& Fine Aggregate, from natural Source

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	500	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	500	-
5.4.2(a)( Aggregates Impact Value)	-	500	-
5.4.2(b)( Aggregates Impact Value)	-	500	-
5.4.3(a)( Aggregate Abrasion Value)	-	500	-
5.4.3(b)( Aggregate Abrasion Value)	-	500	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	600	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	300	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	300	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	200	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	200	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	200	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	200	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	200	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	200	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	200	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	600	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	600	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	500	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	300	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	300	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	200	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	200	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	200	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	200	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	200	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	200	-
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate)	-	600	-
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	300	-
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	300	-
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	200	-
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	200	-
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	200	-
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	200	-
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	200	-
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	200	-
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	200	-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	600	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	200	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	200	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	200	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	200	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	200	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	200	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	200	-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	600	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	300	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	200	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	200	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	200	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	200	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	200	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	300	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	300	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	300	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	300	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	300	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	900	-
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	500	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	300	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	300	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	300	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	900	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	200	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	200	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	900	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	300	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	300	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	300	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	300	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	300	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	900	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	500	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	1300	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	300	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	200	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	200	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	900	-
5.5(Soundness By Magnesium Sulphate)	-	900	-
7.2(Moisture Content)	-	300	-
7.2(Bulking Of Fine Aggregate)	-	300	-
7.2(Bulk Density loose)	-	300	-
7.2(Bulk Density Rodded)	-	300	-
5.5(Soundness By Magnesium Sulphate)	-	900	-
7.2(Moisture Content)	-	300	-
7.2(Bulk Density loose)	-	300	-
7.2(Bulk Density Rodded)	-	300	-
5.3(Elongation Index)	-	300	-
5.3(Flakiness Index)	-	300	-
5.6(Alkali Agregate Reaction )	-	300	-
5.7 table 3(WaterAbsorption)	-	300	-
5.7 table 3(Specific Gravity)	-	300	-
5.3(Flakiness & Elongation)	-	500	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	900	-
5.7 table 4 (Calcium oxide)	-	300	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	900	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	1300	-
3.2.2 Table 3 ii) IS 1963(Basicity as CaO/SiO2)	-	200	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	300	-
Clause 5.6(Nature of Aggregate)	-	300	-
Clause 5.6(Dissolved Silica)	-	300	-
Clause 5.6(Reduction in Alkalinity)	-	300	-
Clause 5.1(General)	-	200	-
Clause 5.1(General)	-	200	-
Table 4 Cl. 5.7 (ii)(Total Sulphur as S)	-	200	-
Table 4 Cl. 5.7 (iii)(Total iron as FeO)	-	200	-
Table 5 Cl. 5.7 (i)(Calcium oxide as CaO,)	-	200	-
Table 5 Cl. 5.7 (ii)(Magnesium oxide as MgO)	-	200	-
Table 5 Cl. 5.7 (iii)(Total iron as FeO)	-	200	-
Table 5 Cl. 5.7 (iv)(Basicity as CaO/SiO2)	-	200	-
Table 6 Cl. 5.7 (i)(Calcium oxide as CaO)	-	200	-
Table 6 Cl. 5.7 (ii)(Total sulphur as S)	-	200	-
Table 6 Cl. 5.7 (iii)(Total iron as FeO)	-	200	-
Table 6 Cl. 5.7 (iv)()	-	0	-
Table 6 Cl. 5.7 (iv)()	-	0	-

23 May, 2028

-
Only for natural aggregates

1882

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 6529 (1996)

Stainless steel blooms, billets and slabs for forging - Specification (First Revision)

All

9450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1,7.2,7.3 Table 1(Carbon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	300	-
7.1,7.2,7.3 Table 1(Silicon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	300	-
7.1,7.2,7.3 Table 1(Manganese-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	300	-
7.1,7.2,7.3 Table 1(Nickel-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	300	-
7.1,7.2,7.3 Table 1(Chromium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	300	-
7.1,7.2,7.3 Table 1(Molybdenum-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	300	-
7.1,7.2,7.3 Table 1(Titanium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	300	-
7.1,7.2,7.3 Table 1(Niobium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	300	-
7.1,7.2,7.3 Table 1(Sulphur-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	300	-
7.1,7.2,7.3 Table 1(Phosphorous-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	300	-
7.1,7.2,7.3 Table 1(Others(Nitrogen)-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	300	-
7.1,7.2,7.3 Table 1(Selenium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	300	-
7.3(Copper-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	300	-
13(Corrosion Resistance- IS 10461(Part1))	-	2500	-
13(Corrosion Resistance- IS 10461(Part2))	-	2500	-
6(Freedom from defects)	-	500	-
9(Hardness)	-	1500	-
10(Dimensional Tolerances)	-	1000	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Phosphorus)	-	300	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Sulphur)	-	300	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Niobium)	-	300	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Titanium)	-	300	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Molybdenum)	-	300	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Chromium)	-	300	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Nickel )	-	300	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Manganese)	-	300	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Silicon)	-	300	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Carbon)	-	300	-
14(Marking)	-	500	-
14(Marking)	-	500	-
7.1,7.2,7.3 Table 1(Carbon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
7.1,7.2,7.3 Table 1(Silicon-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
7.1,7.2,7.3 Table 1(Manganese-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
7.1,7.2,7.3 Table 1(Nickel-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
7.1,7.2,7.3 Table 1(Chromium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
7.1,7.2,7.3 Table 1(Molybdenum-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
7.1,7.2,7.3 Table 1(Titanium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
7.1,7.2,7.3 Table 1(Niobium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
7.1,7.2,7.3 Table 1(Sulphur-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
7.1,7.2,7.3 Table 1(Phosphorous-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
7.1,7.2,7.3 Table 1(Others(Nitrogen)-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
7.1,7.2,7.3 Table 1(Selenium-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
7.3(Copper-Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	0	-
13(Corrosion Resistance- IS 10461(Part1))	-	0	-
13(Corrosion Resistance- IS 10461(Part2))	-	0	-
6(Freedom from defects)	-	0	-
9(Hardness)	-	0	-
10(Dimensional Tolerances)	-	0	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Phosphorus)	-	0	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Sulphur)	-	0	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Niobium)	-	0	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Titanium)	-	0	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Molybdenum)	-	0	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Chromium)	-	0	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Nickel )	-	0	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Manganese)	-	0	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Silicon)	-	0	-
Clause No.7.1,7.2,7.3 and 12.1 Table 1(Carbon)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-

10 Mar, 2027

-
Included w.e.f 20.05.2025

1883

DELHI TEST HOUSE, Azadhpur

8131406

IS 8944 (2005)

Chlorpyrifos, emulsifiable concentrates - Specification (First Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description)	-	500	NA
3.2.2(Cold Test)	-	1000	NA
3.2.3(Flash Point (Abel))	-	1000	NA
3.2.4(Emulsion Stability)	-	1000	NA
3.3.1(Chloropyrifos content)	-	2750	NA
3.3.2(Acidity (as H2SO4), )	-	500	NA
3.2.1(Description)	-	250	NA

-
-

1884

DELHI TEST HOUSE, Azadhpur

8131406

IS 15573 (2018)

Polyaluminium chloride (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1, 5.1.2, 5.2, Table-1(i)(Aluminium as Al2O3,)	-	750	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(ii)(Basicity)	-	750	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(iii)(Chloride (as Cl))	-	750	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(iv)(Sulphates(as SO4))	-	750	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(v)(Specific gravity)	-	1500	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(x)(Insoluble)	-	750	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(xi)(Ph of 5% of solution)	-	750	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(ix)(Total organic carbon)	-	1500	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1, 5.1.2, 5.2, Table-1(vii)(Bulk density)	-	1500	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1,5.1.2,5.2, Table-1, Toxic substances(Mercury(as Hg))	-	750	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1, 5.1.2 ,5.2, Table-1, Toxic substances(Arsenic(as As))	-	750	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Cadmium(as Cd))	-	750	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Lead(as Pb))	-	750	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1.5.1.2,5.2, Table-1, Toxic substances(Iron(as Fe))	-	750	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Manganese(as Mn))	-	750	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Chromium (as Cr))	-	750	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1, 5.12, 5.2, Table-1, Toxic substances(Selenium (as Se))	-	750	Rs.15000/- for liquid, Rs.14000/- for powder
5.1.1(Description -)	-	750	Rs.15000/- for liquid, Rs.14000/- for powder

-
-

1885

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

All

3700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	2500	-
3.2, 3.2.1, Fig 2(Manufacture)	-	500	-
3.2.2, Fig 1, table 1(Dimensions)	-	500	-
3.2.3(the socket measurement shall comply with IS 10124 (Part 1).)	-	500	-
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of 45o Bend)	-	500	-
Table 2 (Clause 3.2.2, and Fig. 2)(Dimensions of 45° Bend for Elastomeric Sealing Ring Joint)	-	500	-

10 Mar, 2027

-
Included w.e.f 08.05.2025

1886

ACCURATE TEST SOLUTIONS LLP

8141226

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	2500	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	2500	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	1000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	1000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-

04 Jul, 2027

-
Included.w.e.f.24.01.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 (EMC/EMI), Cl 24 (component)

1887

Atharva Laboratories Pvt. Ltd. , Noida (8134206)

8134206

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

39950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	150	10 % Discount to BIS
Cl 5.2.2, Table 4(" Height of upper ")	-	250	10 % Discount to BIS15
Cl 5.2.3(Heel area)	-	250	10 % Discount to BIS
Cl 5.3.1.1(Construction of whole footwear)	-	150	10 % Discount to BIS
Cl 5.3.1.2(Upper/outsole bond strength)	-	800	10 % Discount to BIS
Cl 5.3.2.1(Toe protection - general)	-	250	10 % Discount to BIS
Cl 5.3.2.2(Internal length)	-	800	10 % Discount to BIS
Cl 5.3.2.3(Width of toecap flange)	-	250	10 % Discount to BIS
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1000	10 % Discount to BIS
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1000	10 % Discount to BIS
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	2500	10 % Discount to BIS
Cl 5.3.2.6(Impact resistance)	-	1200	10 % Discount to BIS
Cl 5.3.2.7(Compression resistance)	-	1200	10 % Discount to BIS
Cl 5.3.3(Leak proofness)	-	1000	10 % Discount to BIS
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1500	10 % Discount to BIS
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	3000	10 % Discount to BIS
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	10 % Discount to BIS
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	10 % Discount to BIS
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	10 % Discount to BIS
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2500	10 % Discount to BIS
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	3000	10 % Discount to BIS
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	3000	10 % Discount to BIS
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	10 % Discount to BIS
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	10 % Discount to BIS
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	500	10 % Discount to BIS
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	3000	10 % Discount to BIS
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	3000	10 % Discount to BIS
Cl 5.3.7(Seam strength)	-	800	10 % Discount to BIS
Cl 5.3.8(Lead Content ( National Annex A))	-	500	10 % Discount to BIS
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	250	10 % Discount to BIS
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	250	10 % Discount to BIS
Cl 5.4.2(Thickness)	-	250	10 % Discount to BIS
Cl 5.4.3(Tear strength)	-	800	10 % Discount to BIS
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	800	10 % Discount to BIS
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	800	10 % Discount to BIS
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	800	10 % Discount to BIS
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	800	10 % Discount to BIS
Cl 5.4.5(Flexing resistance)	-	1200	10 % Discount to BIS
Cl 5.4.6(Water vapour permeability and coefficient)	-	1200	10 % Discount to BIS
Cl 5.4.7(Resistance to hydrolysis)	-	2000	10 % Discount to BIS
Cl 5.5.2(Lining- Tear strength)	-	800	10 % Discount to BIS
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	10 % Discount to BIS
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1200	10 % Discount to BIS
Cl 5.6.2, Table 14(Tear strength of tongue)	-	800	10 % Discount to BIS
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	250	10 % Discount to BIS
Cl 5.7.2(Water permeability of insock)	-	500	10 % Discount to BIS
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	850	10 % Discount to BIS
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	850	10 % Discount to BIS
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	10 % Discount to BIS
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	250	10 % Discount to BIS
Cl 5.8.2.2(Cleated area)	-	250	10 % Discount to BIS
Cl 5.8.2.3(Cleat height)	-	250	10 % Discount to BIS
Cl 5.8.3(Outsole- Tear strength)	-	800	10 % Discount to BIS
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	10 % Discount to BIS
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	10 % Discount to BIS
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	2000	10 % Discount to BIS
Cl 5.8.7(Interlayer bond strength)	-	800	10 % Discount to BIS
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	10 % Discount to BIS
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	10 % Discount to BIS
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	500	10 % Discount to BIS
Cl 6.2.1.2(Construction of perforation resistant insert)	-	150	10 % Discount to BIS
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	250	10 % Discount to BIS
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	2000	10 % Discount to BIS
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1000	10 % Discount to BIS
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1000	10 % Discount to BIS
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	10 % Discount to BIS
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1500	10 % Discount to BIS
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1500	10 % Discount to BIS
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1200	10 % Discount to BIS
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1200	10 % Discount to BIS
Cl 6.2.4(Energy absorption of seat region)	-	1000	10 % Discount to BIS
Cl 6.2.5(Water resistance)	-	1000	10 % Discount to BIS
Cl 6.2.6.1(Metatarsal protection - Construction)	-	150	10 % Discount to BIS
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1000	10 % Discount to BIS
Cl 6.2.7(Ankle protection)	-	800	10 % Discount to BIS
Cl 6.2.8.2(Cut resistance footwear- design)	-	150	10 % Discount to BIS
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	150	10 % Discount to BIS
Cl 6.2.8.3(Resistance to cutting)	-	1200	10 % Discount to BIS
Cl 6.2.9(Scuff cap)	-	1000	10 % Discount to BIS
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	1500	10 % Discount to BIS
Cl 6.3(Upper — Water penetration and absorption)	-	1000	10 % Discount to BIS
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	10 % Discount to BIS
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1500	10 % Discount to BIS
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1200	10 % Discount to BIS
Cl 6.4.3.2(Design of Ladder grip)	-	250	10 % Discount to BIS
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	250	10 % Discount to BIS
Cl 6.4.3.4(Heel breast of Ladder grip)	-	500	10 % Discount to BIS
Cl 7, Table 20("Marking ")	-	150	10 % Discount to BIS
Cl 5.3.4("Specific ergonomic features ")	-	500	10 % Discount to BIS
Cl 5.2(Design)	-	0	-
Cl 5.2.2, Table 4(" Height of upper ")	-	0	-
Cl 5.2.3(Heel area)	-	0	-
Cl 5.3.1.1(Construction of whole footwear)	-	0	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	0	-
Cl 5.3.2.1(Toe protection - general)	-	0	-
Cl 5.3.2.2(Internal length)	-	0	-
Cl 5.3.2.3(Width of toecap flange)	-	0	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	0	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	0	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	0	-
Cl 5.3.2.6(Impact resistance)	-	0	-
Cl 5.3.2.7(Compression resistance)	-	0	-
Cl 5.3.3(Leak proofness)	-	0	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	0	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	0	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	0	-
Cl 5.3.7(Seam strength)	-	0	-
Cl 5.3.8(Lead Content ( National Annex A))	-	0	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	0	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	0	-
Cl 5.4.2(Thickness)	-	0	-
Cl 5.4.3(Tear strength)	-	0	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	0	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	0	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	0	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	0	-
Cl 5.4.5(Flexing resistance)	-	0	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	0	-
Cl 5.4.7(Resistance to hydrolysis)	-	0	-
Cl 5.5.2(Lining- Tear strength)	-	0	-
Cl 5.5.3(Lining- Abrasion resistance)	-	0	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	0	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	0	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	0	-
Cl 5.7.2(Water permeability of insock)	-	0	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	0	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	0	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	0	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	0	-
Cl 5.8.2.2(Cleated area)	-	0	-
Cl 5.8.2.3(Cleat height)	-	0	-
Cl 5.8.3(Outsole- Tear strength)	-	0	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	0	-
Cl 5.8.5(Outsole-Flexing resistance)	-	0	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	0	-
Cl 5.8.7(Interlayer bond strength)	-	0	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	0	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	0	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	0	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	0	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	0	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	0	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	0	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	0	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	0	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	0	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	0	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	0	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	0	-
Cl 6.2.4(Energy absorption of seat region)	-	0	-
Cl 6.2.5(Water resistance)	-	0	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	0	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	0	-
Cl 6.2.7(Ankle protection)	-	0	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	0	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	0	-
Cl 6.2.8.3(Resistance to cutting)	-	0	-
Cl 6.2.9(Scuff cap)	-	0	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	0	-
Cl 6.3(Upper — Water penetration and absorption)	-	0	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	0	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	0	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	0	-
Cl 6.4.3.2(Design of Ladder grip)	-	0	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	0	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	0	-
Cl 7, Table 20("Marking ")	-	0	-
Cl 5.3.4("Specific ergonomic features ")	-	0	-
Cl 5.2(Design)	-	-	-
Cl 5.2.2, Table 4(" Height of upper ")	-	-	-
Cl 5.2.3(Heel area)	-	-	-
Cl 5.3.1.1(Construction of whole footwear)	-	-	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	-	-
Cl 5.3.2.1(Toe protection - general)	-	-	-
Cl 5.3.2.2(Internal length)	-	-	-
Cl 5.3.2.3(Width of toecap flange)	-	-	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	-	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	-	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	-	-
Cl 5.3.2.6(Impact resistance)	-	-	-
Cl 5.3.2.7(Compression resistance)	-	-	-
Cl 5.3.3(Leak proofness)	-	-	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	-	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	-	-
Cl 5.3.7(Seam strength)	-	-	-
Cl 5.3.8(Lead Content ( National Annex A))	-	-	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.2(Thickness)	-	-	-
Cl 5.4.3(Tear strength)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	-	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	-	-
Cl 5.4.5(Flexing resistance)	-	-	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	-	-
Cl 5.4.7(Resistance to hydrolysis)	-	-	-
Cl 5.5.2(Lining- Tear strength)	-	-	-
Cl 5.5.3(Lining- Abrasion resistance)	-	-	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	-	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	-	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	-	-
Cl 5.7.2(Water permeability of insock)	-	-	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	-	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	-	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	-	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	-	-
Cl 5.8.2.2(Cleated area)	-	-	-
Cl 5.8.2.3(Cleat height)	-	-	-
Cl 5.8.3(Outsole- Tear strength)	-	-	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	-	-
Cl 5.8.5(Outsole-Flexing resistance)	-	-	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	-	-
Cl 5.8.7(Interlayer bond strength)	-	-	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	-	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	-	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	-	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	-	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	-	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	-	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	-	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	-	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	-	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	-	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	-	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	-	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	-	-
Cl 6.2.4(Energy absorption of seat region)	-	-	-
Cl 6.2.5(Water resistance)	-	-	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	-	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	-	-
Cl 6.2.7(Ankle protection)	-	-	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	-	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	-	-
Cl 6.2.8.3(Resistance to cutting)	-	-	-
Cl 6.2.9(Scuff cap)	-	-	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	-	-
Cl 6.3(Upper — Water penetration and absorption)	-	-	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	-	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	-	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	-	-
Cl 6.4.3.2(Design of Ladder grip)	-	-	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	-	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	-	-
Cl 7, Table 20("Marking ")	-	-	-
Cl 5.3.4("Specific ergonomic features ")	-	-	-

21 Jul, 2028

-
Included w.e.f.07.03.2025 Exclusion Cl 6.2.7 (Ankle protection)

1888

EMC Testing and Compliance LLP

8141526

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	1000	-
Cl 5.2.2(" Height of upper ")	-	1000	-
Cl 5.2.3(Heel area)	-	1000	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2(Leak proofness)	-	1000	-
Cl 5.3.3(Specific ergonomic features)	-	1000	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.6(Seam strength)	-	1000	-
Cl 5.3.7(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	1000	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	1000	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6(Ankle protection)	-	1000	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	1000	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.7.3(Resistance to cutting)	-	1000	-
Cl 6.2.8(Scuff cap)	-	1000	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	1000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7("Marking ")	-	500	-
Cl 5.2(Design)	-	1000	-
Cl 5.2.2(" Height of upper ")	-	1000	-
Cl 5.2.3(Heel area)	-	1000	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2(Leak proofness)	-	1000	-
Cl 5.3.3(Specific ergonomic features)	-	1000	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.6(Seam strength)	-	1000	-
Cl 5.3.7(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	1000	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	1000	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6(Ankle protection)	-	1000	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	1000	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.7.3(Resistance to cutting)	-	1000	-
Cl 6.2.8(Scuff cap)	-	1000	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	1000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7("Marking ")	-	500	-

19 Jul, 2027

-
Included w.e.f 01.04.2025

1889

EMC Testing and Compliance LLP

8141526

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	1000	-
Cl 5.2.2(" Height of upper ")	-	1000	-
Cl 5.2.3(Heel area)	-	1000	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2.1(Toe protection - general)	-	1000	-
Cl 5.3.2.2(Internal length)	-	1000	-
Cl 5.3.2.3(Width of toecap flange)	-	1000	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	1000	-
Cl 5.3.2.6(Impact resistance)	-	1000	-
Cl 5.3.2.7(Compression resistance)	-	1000	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	1000	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.7(Seam strength)	-	1000	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	1000	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	1000	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1000	-
Cl 6.2.7(Ankle protection)	-	1000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	1000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.8.3(Resistance to cutting)	-	1000	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	1000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7("Marking ")	-	1000	-
Cl 7("Marking ")	-	1000	-
Cl 5.2(Design)	-	-	-
Cl 5.2.2(" Height of upper ")	-	-	-
Cl 5.2.3(Heel area)	-	-	-
Cl 5.3.1.1(Construction of whole footwear)	-	-	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	-	-
Cl 5.3.2.1(Toe protection - general)	-	-	-
Cl 5.3.2.2(Internal length)	-	-	-
Cl 5.3.2.3(Width of toecap flange)	-	-	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	-	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	-	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	-	-
Cl 5.3.2.6(Impact resistance)	-	-	-
Cl 5.3.2.7(Compression resistance)	-	-	-
Cl 5.3.3(Leak proofness)	-	-	-
Cl 5.3.4("Specific ergonomic features ")	-	-	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	-	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	-	-
Cl 5.3.7(Seam strength)	-	-	-
Cl 5.3.8(Lead Content ( National Annex A))	-	-	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.2(Thickness)	-	-	-
Cl 5.4.3(Tear strength)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	-	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	-	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	-	-
Cl 5.4.7(Resistance to hydrolysis)	-	-	-
Cl 5.5.2(Lining- Tear strength)	-	-	-
Cl 5.5.3(Lining- Abrasion resistance)	-	-	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	-	-
Cl 5.6.2(Tear strength of tongue)	-	-	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	-	-
Cl 5.7.2(Water permeability of insock)	-	-	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	-	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	-	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	-	-
Cl 5.8.2.1(Thickness of Outsole)	-	-	-
Cl 5.8.2.2(Cleated area)	-	-	-
Cl 5.8.2.3(Cleat height)	-	-	-
Cl 5.8.3(Outsole- Tear strength)	-	-	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	-	-
Cl 5.8.5(Outsole-Flexing resistance)	-	-	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	-	-
Cl 5.8.7(Interlayer bond strength)	-	-	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	-	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	-	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	-	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	-	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	-	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	-	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	-	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	-	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	-	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	-	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	-	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	-	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	-	-
Cl 6.2.4(Energy absorption of seat region)	-	-	-
Cl 6.2.5(Water resistance)	-	-	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	-	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	-	-
Cl 6.2.7(Ankle protection)	-	-	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	-	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	-	-
Cl 6.2.8.3(Resistance to cutting)	-	-	-
Cl 6.2.9(Scuff cap)	-	-	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	-	-
Cl 6.3(Upper — Water penetration and absorption)	-	-	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	-	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	-	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	-	-
Cl 6.4.3.2(Design of Ladder grip)	-	-	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	-	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	-	-
Cl 7("Marking ")	-	-	-
Cl 7("Marking ")	-	-	-

19 Jul, 2027

-
Included w.e.f 01.04.2025

1890

DELHI TEST HOUSE, Azadhpur

8131406

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 11(Expansion Test)	-	500	NA
Cl 15(Length, Width & Thickness)	-	750	NA
7.1(Carbon %)	-	500	NA
7.1(Manganese %)	-	500	NA
7.1(Phosphorus %)	-	500	NA
7.1(Sulphur %)	-	500	NA
7.1(Silicon %)	-	500	NA
7.1( Copper %)	-	500	-
7.1( Aluminium %)	-	500	NA
7.1( Nb)	-	500	NA
7.1(V)	-	500	NA
7.1( Ti)	-	500	NA
7.1(Cr)	-	500	NA
7.1(Mo)	-	500	NA
7.1(Ni)	-	500	NA
7.1( Nitrogen%)	-	2000	NA
Cl. 16(Weight)	-	250	NA
Cl. 15(Thickness)	-	250	NA
Cl. 15(Width)	-	250	NA
Cl. 8.3, Table 6 & 7( Elongation at 5.65√A Gauge length)	-	1000	NA
Cl. 8.3, Table 6 & 7(Elongation at 80 mm gauge length)	-	1000	NA
Cl. 8.3, Table 6 & 7(Elongation at 50 mm gauge length)	-	1000	NA
Cl. 8.3, Table 6 & 7(Yield strength)	-	1000	NA
Cl 15(Length, Width & Thickness)	-	750	NA
Clauses 8.2, 8.3 and 8.3.1 & table 6 & 7(Tensile Strength)	-	1000	NA
Clauses 8.2, 8.3 and 8.3.1 & table 6 & 7(Yield Strength)	-	1000	NA
Clauses 8.2, 8.3 and 8.3.1 & table 6 & 7(Elongation)	-	1000	NA

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number