BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11932 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

1831

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 7903 (2017)

Textiles – Tarpaulins made from high density polyethylene (HDPE) woven fabrics – Specification (fifth revision)

55900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4( Line/ Cord beading IS 7903)	-	200	-
4.0(Types IS 7903)	-	0	-
5.1.1(Lamination IS 7903)	-	0	-
5.1.2(Lamination IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	200	-
5.2.1(Construction IS 7903)	-	200	-
5.2.1(Construction IS 7903)	-	200	-
5.2.1(Construction IS 7903)	-	200	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.3(Joint/Seam, IS 7903)	-	200	-
5.4(Fixing of Eyelets, IS 7903)	-	200	-
5.4(Fixing of Eyelets ,IS 7903)	-	0	-
6.1 Table 1,i)(No of HDPE fabric layers ,IS 7903)	-	200	-
6.1 Table 1,ii)(No of lamination layers, IS 7903)	-	200	-
6.1 Table 1, iii)(Total no of layers in the finished tarpaulin, IS 7903)	-	200	-
6.1 Table 1,iv)(Mass of finished tarpaulin, Annex B ,IS 7903)	-	450	-
6.1 Table 1,v)(Mass of laminated fabric, Annex C , IS 7903)	-	450	-
6.1 Table 1vi)(Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-	900	-
6.1 Table 1vi)(Breaking strength before UV exposure,weft, IS 1969 part 1)	-	0	-
6.1 Table 1 vii)(Elongation at break of fabric,warp, IS 1969 Part 1)	-	0	-
6.1 Table 1 vii)(Elongation at break of fabric,weft, IS 1969 Part1)	-	0	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Warp, IS 13162 part 2& IS 1969 Part1 )	-	13860	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Weft , IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 ix)(Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-	800	-
6.1 Table 1 x)(Retention of welded seam strength after UV exposure of 144h(Weft) ,IS 13162 part 2& IS 1969 Part1 )	-	13760	-
6.1 Table 1 xi)(Trapezoidal tear strength, IS 14293)	-	900	-
6.1 Table 1 xii)(Puncture Resistance, Annex D of IS 7903)	-	1350	-
6.1 Table 1 xiii)(Impact Failure load , at 1524 mmdrop, Annex E of IS 7903)	-	3000	-
6.1 Table 1 xiv)(Color fastness to light (For color Tarpulines) , IS 2454)	-	1650	-
6.1 Table 1 xv)(Ash Content, Annex F of IS 7903)	-	650	-
6.2(Length, IS 7903)	-	200	-
6.2(Width, IS 7903)	-	200	-
6.2(height, IS 7903)	-	200	-
6.3(Water Proofness,IS 7941)	-	1600	-
6.3(Water Proofness, IS 7940)	-	700	-
3.4( Line/ Cord beading IS 7903)	-	0	-
4.0(Types IS 7903)	-	0	-
5.1.1(Lamination IS 7903)	-	0	-
5.1.2(Lamination IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.2.1(Construction IS 7903)	-	0	-
5.3(Joint/Seam, IS 7903)	-	0	-
5.4(Fixing of Eyelets, IS 7903)	-	0	-
5.4(Fixing of Eyelets ,IS 7903)	-	0	-
6.1 Table 1,i)(No of HDPE fabric layers ,IS 7903)	-	0	-
6.1 Table 1,ii)(No of lamination layers, IS 7903)	-	0	-
6.1 Table 1, iii)(Total no of layers in the finished tarpaulin, IS 7903)	-	0	-
6.1 Table 1,iv)(Mass of finished tarpaulin, Annex B ,IS 7903)	-	0	-
6.1 Table 1,v)(Mass of laminated fabric, Annex C , IS 7903)	-	0	-
6.1 Table 1vi)(Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-	0	-
6.1 Table 1vi)(Breaking strength before UV exposure,weft, IS 1969 part 1)	-	0	-
6.1 Table 1 vii)(Elongation at break of fabric,warp, IS 1969 Part 1)	-	0	-
6.1 Table 1 vii)(Elongation at break of fabric,weft, IS 1969 Part1)	-	0	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Warp, IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Weft , IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 ix)(Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-	0	-
6.1 Table 1 x)(Retention of welded seam strength after UV exposure of 144h(Weft) ,IS 13162 part 2& IS 1969 Part1 )	-	0	-
6.1 Table 1 xi)(Trapezoidal tear strength, IS 14293)	-	0	-
6.1 Table 1 xii)(Puncture Resistance, Annex D of IS 7903)	-	0	-
6.1 Table 1 xiii)(Impact Failure load , at 1524 mmdrop, Annex E of IS 7903)	-	0	-
6.1 Table 1 xiv)(Color fastness to light (For color Tarpulines) , IS 2454)	-	0	-
6.1 Table 1 xv)(Ash Content, Annex F of IS 7903)	-	0	-
6.2(Length, IS 7903)	-	0	-
6.2(Width, IS 7903)	-	0	-
6.2(height, IS 7903)	-	0	-
6.3(Water Proofness,IS 7941)	-	0	-
6.3(Water Proofness, IS 7940)	-	0	-
6.2(dimension(l))	-	0	-
6.2(dimension(w))	-	0	-
6.2(dimension(h))	-	0	-
3.3(Eyelets (Dimesnions) i) Starting thickness of metal Aluminium min ii) Outside dia of flange‘A’ iii) Flange formed height ‘B’ iv) Pierced dia ‘C’ v) Overall length ‘D’ vi) Internal dia of Barrel when closed ‘E’ min vii) Thickness of compressed material between eyelet and washer F’ max viii) Outside diameter of barrel under the flange‘G’ )	-	400	-
3.3(Eyelets)	-	0	-
3.2(HDPE Fabric (Material Identification))	-	500	-
3.1(HDPE Tapes (Carbon Black Content))	-	550	-
3.1(HDPE Tapes (Presence of UV-stabiliser))	-	0	-
3.1(HDPE Tapes (Material Identification))	-	0	-
3.1()	-	0	-
3.1()	-	0	-
3.1()	-	0	-
3.1()	-	0	-
3.1()	-	0	-
4()	-	0	-
5.1.1(Coating Thickness)	-	700	-
5.1.1(Carbon Black Content)	-	550	-
5.1.1(Sandwich lamination thickness)	-	450	-
5.1.1(Mass of Finished Tarpaulin)	-	0	-
5.1.1(UV Exposure (144 hrs))	-	0	-
5.1.1(Agening)	-	10080	-

-
Included w.e.f 26.05.2025

1832

CIPET, Jaipur

8122834

IS 2833 (2019)

Aniline, technical - Specification (Second Revision)

Aniline, Technical - Specification

16300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2.1(Description)	-	1000	Include packing and marking charges also
Cl.2.2.1(Relative Density at 27/27 0C)	-	1000	-
Cl.2.2.2(Crystallizing Point)	-	2200	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	2000	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	3200	-
Cl.2.2.3(Distillation Range)	-	2200	-
Cl.2.2.4(Assay, percent by GC)	-	3200	-
Cl.2.2.6(Moisture content, percent by mass)	-	1500	-
Cl.2.1(Description)	-	0	-
Cl.2.2.1(Relative Density at 27/27 0C)	-	0	-
Cl.2.2.2(Crystallizing Point)	-	0	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	0	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	0	-
Cl.2.2.3(Distillation Range)	-	0	-
Cl.2.2.4(Assay, percent by GC)	-	0	-
Cl.2.2.6(Moisture content, percent by mass)	-	0	-
Cl.2.1(Description)	-	0	-
Cl.2.2.1(Relative Density at 27/27 0C)	-	0	-
Cl.2.2.2(Crystallizing Point)	-	0	-
Cl.2.2.3(Distillation Range)	-	0	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	0	-
Cl.2.2.4(Assay, percent by GC)	-	0	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	0	-
Cl.2.2.6(Moisture content, percent by mass)	-	0	-
Cl.2.1(Description)	-	0	-
Cl.2.2.1(Relative Density at 27/27 0C)	-	0	-
Cl.2.2.2(Crystallizing Point)	-	0	-
Cl.2.2.3(Distillation Range)	-	0	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	0	-
Cl.2.2.4(Assay, percent by GC)	-	0	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	0	-
Cl.2.2.6(Moisture content, percent by mass)	-	0	-
Cl.2.1(Description)	-	0	-
Cl.2.2.1(Relative Density at 27/27 0C)	-	0	-
Cl.2.2.2(Crystallizing Point)	-	0	-
Cl.2.2.3(Distillation Range)	-	0	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	0	-
Cl.2.2.4(Assay, percent by GC)	-	0	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	0	-
Cl.2.2.6(Moisture content, percent by mass)	-	0	-
Cl.2.1(Description)	-	0	-
Cl.2.2.1(Relative Density at 27/27 0C)	-	0	-
Cl.2.2.2(Crystallizing Point)	-	0	-
Cl.2.2.3(Distillation Range)	-	0	-
Cl.2.2.4(Assay, percent by Nitrite value)	-	0	-
Cl.2.2.4(Assay, percent by GC)	-	0	-
Cl.2.2.5(Nitrobenzene content by GC, ppm)	-	0	-
Cl.2.2.6(Moisture content, percent by mass)	-	0	-

21 Feb, 2029

-
Included w.e.f.03.06.2025

1833

MARQUIS TECHNOLOGIES PRIVATE LIMITED, NOIDA

8175126

IS 16107 : Part 2 : Sec 1 (2012)

Luminaires performance: Part 2 particular requirements: Sec 1 led luminaire

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(LED Luminaire Life)	-	15000	-
9(Chromaticity Coordinates, Correlated colour temperature and colour rendering)	-	15000	-
8(Light Output)	-	10000	-
7(Total Input Power)	-	15000	-

13 Dec, 2026

-
Included w.e.f 19.05.2025

1834

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 274 : Part 1 and 2 (1981)

Specification for shovels: Part 1 genral purpose shovels: Part 2 heat - Treated shovels (Third Revision)

All Grade/Type/Size/Designation per the IS 274 (Pt 1&2)

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Sulphur)	-	200	- S = Rs.100/- per element (As per IS 274 Part-I) - S = Rs.100/- per element (As per IS 274 Part-II)
4.1(Phosphorus)	-	200	- P = Rs.100/- per element (As per IS 274 Part-I) - P = Rs.100/- per element (As per IS 274 Part-II)
5 Table-1,2(Shape)	-	2400	Rs. 1200/- as per IS 274 (Part-I) Rs. 1200/- as per IS 274 (Part-II)
5 Table-1,2(Dimensions- A)	-	0	-
5 Table-1,2(Dimensions- B)	-	0	-
5 Table-1,2(Dimensions- C)	-	0	-
5 Table-1,2(Dimensions- D)	-	0	-
5 Table-1,2(Dimensions- E)	-	0	-
5 Table-1,2(Dimensions- G)	-	0	-
5 Table-1,2(Dimensions- H)	-	0	-
5 Table-1,2(Dimensions- K)	-	0	-
5 Table-1,2(Dimensions- L)	-	0	-
6.1(Blade thickness)	-	0	-
7.0(Mass)	-	0	-
8.0(Manufacture)	-	0	-
8.0(Manufacture)	-	0	-
8.0(Manufacture)	-	0	-
9.1(Handles)	-	0	-
9.3(Handles)	-	0	-
11.0(Workmanship & Finish )	-	1000	Rs. 500/- as per IS 274 (Part-I) Rs. 500/- as per IS 274 (Part-II)
12.0(Preservative Treatment )	-	0	-
14.2(Bending Test)	-	0	-
14.3(Flexing Test)	-	0	-
4.1(Sulphur)	-	0	-
4.1(Phosphorus)	-	0	-
5 Table-1,2(Shape)	-	0	-
5 Table-1,2(Dimensions- A)	-	0	-
5 Table-1,2(Dimensions- B)	-	0	-
5 Table-1,2(Dimensions- C)	-	0	-
5 Table-1,2(Dimensions- D)	-	0	-
5 Table-1,2(Dimensions- E)	-	0	-
5 Table-1,2(Dimensions- G)	-	0	-
5 Table-1,2(Dimensions- H)	-	0	-
5 Table-1,2(Dimensions- K)	-	0	-
5 Table-1,2(Dimensions- L)	-	0	-
6.1(Blade thickness)	-	0	-
7.0(Mass)	-	0	-
8.0(Manufacture)	-	0	-
8.0(Manufacture)	-	0	-
8.0(Manufacture)	-	0	-
9.1(Handles)	-	400	Hardness As per IS 274 (Part-II) Clause no. 9.0
9.3(Handles)	-	0	-
11.0(Workmanship & Finish )	-	500	-
12.0(Preservative Treatment )	-	0	-
14.2(Bending Test)	-	1000	Rs. 1000/- as per IS 274 (Part-I) Rs. 1000/- as per IS 274 (Part-II)
14.3(Flexing Test)	-	1000	Rs. 1000/- as per IS 274 (Part-I) Rs. 1000/- as per IS 274 (Part-II)
4.0(PHOSPHORUS)	-	0	-
4.0(SULPHUR)	-	0	-

17 Feb, 2028

-
-

1835

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 4003 : Part 1 (1978)

Specification for pipe wrenches: Part 1 general purpose (First Revision)

All Grade/Type/Size/Designation per IS 4003-1:2024

13520 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions- Nominal Size)	-	1200	-
4 AND AS PER IS 1570 PART 4(CARBON)	-	6620	-
4 AND AS PER IS 1570 PART 2(SULPHUR)	-	0	-
4 AND AS PER IS 1570 PART 2(PHOSPHORUS)	-	0	-
4 AND AS PER IS 1570 PART 2(MANGANESE)	-	0	-
4 AND AS PER IS 1570 PART 4(SILICON)	-	0	-
4 AND AS PER IS 1570 PART 4(CHROMIUM)	-	0	-
5(Hardness- Jaws)	-	1200	-
7(Workmanship & Finish)	-	500	-
13.1(Static Load Test)	-	2000	-
5(Hardness- Shank of movable Jaw)	-	0	-
4 AND AS PER IS 1570 PART 4(ALUMINIUM)	-	0	-
4 AND AS PER IS 1570 PART 4(VANADIM)	-	0	-
4 AND AS PER IS 1570 PART 4(BORON)	-	0	-
4 AND AS PER IS 1570 PART 4(NICKEL)	-	0	-
3(Dimensions-Minimum capacity)	-	0	-
3(Dimensions-Maximum capacity, D)	-	0	-
3(Dimensions- Jaw Thickness,T min)	-	0	-
3(Dimensions- Length of movablejae, l1)	-	0	-
3(Dimensions- Length of Handle, l2)	-	0	-
3(Dimensions- Width of Nut, N)	-	0	-
5(Hardness- Handle of movable Jaw)	-	0	-
6.1(Manufacture- Handel)	-	0	-
6.1(Manufacture- Handel)	-	0	-
6.2(Manufacture- Movable Jaw)	-	0	-
6.2(Manufacture- Movable Jaw)	-	0	-
6.2(Manufacture- Movable Jaw)	-	0	-
6.3(Manufacture- Adjusting Nut)	-	0	-
6.3(Manufacture- Adjusting Nut)	-	0	-
6.4(Manufacture- Frame)	-	0	-
6.5(Manufacture- Hinge Pin)	-	0	-
6.6(Manufacture- Spring)	-	0	-
6.6(Manufacture- Spring)	-	0	-
6.6(Manufacture- Spring)	-	0	-
7(Workmanship & Finish)	-	0	-
7(Workmanship & Finish)	-	0	-
8(Operation)	-	0	-
8(Operation)	-	0	-
13.1(Static Load Test)	-	0	-
13.2(Static- Shock Load Test)	-	2000	-
13.2(Static- Shock Load Test)	-	0	-
4 AND AS PER IS 1570 PART 4(MOLYBDENUM)	-	0	-
4 AND AS PER IS 1570 PART 4(MANGANESE)	-	0	-
4 AND AS PER IS 1570 PART 2(CARBON)	-	0	-

17 Feb, 2028

-
-

1836

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 844 : Part 3 (1979)

Specification for screw drivers: Part 3 dimensions for screw drivers for recessed head screws (Second Revision)

AllGrade/Type/Size/Designation as per IS 844 (Part-III)

3840 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 Table 1 & 2(Torque Test)	-	500	-
4(Hardness)	-	400	-
3 , IS 844 (P- 1)(Finish)	-	1000	Finish Coating
3 , IS 844 (P- 1)(Coating)	-	740	- C, Si, Mn, S, P -100/ element= 500/- - Cr, V - 120/element = Rs. 240/-
2.1( Dimension, d1)	-	1200	For complete dimensional inspection
2.4(h)	-	0	-
2.4(l)	-	0	-
2.3(S)	-	0	-
2.2( Dimension, d)	-	0	-
2.1( Dimension, β)	-	0	-
2.1( Dimension, α)	-	0	-
2.1( Dimension, lmin)	-	0	-
2.1( Dimension, f)	-	0	-
2.1( Dimension, e)	-	0	-
2.1( Dimension, d2)	-	0	-

17 Feb, 2028

-
-

1837

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

38000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	200	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	0	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	0	-
7.1.5(Energy Absorption at Seat Region)	-	1000	-
7.1.6(Complete Shoe Flexing)	-	1000	-
7.1.7(Washability)	-	500	-
7.1.8(Slip Resistance)	-	1000	-
7.1.9(Heel Drop)	-	200	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	500	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	400	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	400	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	600	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	200	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	400	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	1000	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	400	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	0	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	400	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	1000	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	0	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	0	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	600	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	0	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	600	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	0	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	500	-
7.3 , Table No. 4 , i)(Tear strength,)	-	0	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	0	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	0	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	600	-
7.4 , Table No. 5 , i)(Thickness)	-	200	-
7.4 , Table No. 5 , ii)(Flexing index)	-	400	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	400	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	400	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	200	-
7.5 , Table No. 6 , i)(Thickness)	-	0	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	0	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	0	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	400	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	500	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	600	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	600	-
7.6 , Table No. 7 , iv)(Tear strength)	-	400	-
7.6 , Table No. 7 , v)(Tensile strength)	-	400	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	0	-
7.6 , Table No. 7 , vii)(Compression set)	-	0	-
7.7 , Table No. 8 , i)(Compression set)	-	0	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	400	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	400	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	0	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	200	-
7.8 , Table No. 9 , ii)(Resilience)	-	200	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	200	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	200	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	200	-
7.8 , Table No. 9 , v)(Peel strength)	-	400	-
7.9 , Table No. 10 , i)(Peel strength)	-	400	-
7.9 , Table No. 10 , ii)(Shear strength)	-	400	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	400	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	400	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	200	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	400	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	400	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	400	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	400	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	400	PHYSICAL PARAMETER ONLY Rs.22000
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	15000	CHEMICAL PARAMTER ONLY Rs.15000
8(MARKING AND PACKING)	-	0	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	2000	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	1000	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	1000	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	1000	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	1000	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	1000	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	0	-
7.1.1(Whole Footwear)	-	0	-
7.12.2 (Amendment 1)(Lead content)	-	1000	-

02 May, 2027

-
-

1838

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 5872 (2025)

Steel strapping for packaging ( Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.0(Carbon)	-	10000	-
Clause. 5.0(Silicon)	-	10000	-
Clause. 5.0(Manganese)	-	10000	-
Clause. 5.0(Sulphur)	-	10000	-
Clause. 5.0(Phosphorus)	-	10000	-
Clause. 5.0(Boron)	-	10000	-
Clause. 5.0(Niobium)	-	10000	-
Clause. 5.0(Vanadium)	-	10000	-
Clause. 5.0(Titanium)	-	10000	-
Clause. 6.0(Tensile Test)	-	10000	-
Clause. 6.0(Elongation test)	-	10000	-
Clause. 7.0(Reverse Bend Test)	-	10000	-
Clause. 8.0(Retest)	-	10000	-
Clause. 9.0(Freedom From Defects)	-	10000	-
Clause.10.0(Dimension , Shape & Tolerance)	-	10000	-
Clause.11.0(Surface Finish)	-	10000	-
Clause.12.0(Corrosion Resistance)	-	10000	-
Clause.13.0(Packing)	-	10000	-
Clause.14.0(Marking)	-	10000	-
Clause. 5.0(Carbon)	-	10000	-
Clause. 5.0(Silicon)	-	10000	-
Clause. 5.0(Manganese)	-	10000	-
Clause. 5.0(Sulphur)	-	10000	-
Clause. 5.0(Phosphorus)	-	10000	-
Clause. 5.0(Boron)	-	10000	-
Clause. 5.0(Niobium)	-	10000	-
Clause. 5.0(Vanadium)	-	10000	-
Clause. 5.0(Titanium)	-	10000	-
Clause. 6.0(Tensile Test)	-	10000	-
Clause. 6.0(Elongation test)	-	10000	-
Clause. 7.0(Reverse Bend Test)	-	10000	-
Clause. 8.0(Retest)	-	10000	-
Clause. 9.0(Freedom From Defects)	-	10000	-
Clause.10.0(Dimension , Shape & Tolerance)	-	10000	-
Clause.11.0(Surface Finish)	-	10000	-
Clause.12.0(Corrosion Resistance)	-	10000	-
Clause.13.0(Packing)	-	10000	-
Clause.14.0(Marking)	-	10000	-

31 Dec, 2026

-
Included w.e.f.24.04.2025

1839

BIS, Northern Regional Laboratory (NRL)

None

IS 10908 (2023)

FLEXIBLE RUBBER TUBING FOR LIQUEFIED PETROLEUM GAS SPECIFICATION Second Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3.1 (The tubing when supplied in 6.4 mm inside diameter; the tolerance as per table-1)	-
4.4.1 (When tested in accordance with the method given in Annex B, the tubing shall fit over the standard and oversize metal nozzle shown in Fig. 1, 2 and 3.)	-
4.4.2 ("When tested in accordance with the method given in Annex B, the tubing shall remain attached to both nozzles throughout the test period. ")	-
4.5 (When immersed in water for 5 min under an internal air pressure of 0.25 MPa or 250 kPa (2.5 bar), the increase in the outside diameter or the tubing shall not be more than 15 percent.)	-
4.9 (60 cm long tubing shall be subjected to a crushing force of 350 N applied on the middle of the tubing evenly over a length of 25 mm for 5 minutes, and 30 min after removal of the force it shall not show any deformation or collapse, nor shall it leak when subjected to an internal air pressure of 250 kPa)	-
4.12 ("When tested in accordance with the method described in Annex F, the tubing shall not burn to either of the outer marks within the test period of 45 s")	-

-
-

1840

MARQUIS TECHNOLOGIES PRIVATE LIMITED, NOIDA

8175126

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

54000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	2000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	2000	-
8.1.4(Protection against live parts against protective impedance)	-	2000	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	2000	-
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	2000	-
13.3(Electric Strength at operating temperature)	-	2000	-
14(Transient Over Voltages)	-	2000	-
15.0(General)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2000	-
15.2(Spillage Test)	-	2000	-
15.3(Humidity Test)	-	2000	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	2000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	2000	-
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
18(Endurance Test requirements and tests)	-	2000	-
19(Abnormal Operation)	-	2000	-
20(Stability test)	-	2000	-
21(Mechanical Strength Test)	-	2000	-
22(Construction verification related test)	-	0	-
23(General)	-	0	-
24(Components)	-	0	-
25(Supply connection and external flexible cords)	-	2000	-
26(Terminals for external conductors)	-	2000	-
27(Provision for earthing)	-	2000	-
28(Screw test and connections)	-	2000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
30.1(Ball pressure test)	-	2000	-
30.2(Glow Wire Test)	-	2000	-
30.2(Needle Flame Test)	-	2000	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
18(Endurance)	-	2000	-
8.1.5(Live parts of built-in appliances)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classifications)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
7(Marking and instructions)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	0	-
10.2(Current input)	-	0	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	0	-
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
14(Transient Over Voltages)	-	0	-
15.0(General)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.2(Spillage Test)	-	0	-
15.3(Humidity Test)	-	0	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
18(Endurance Test requirements and tests)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability test)	-	0	-
21(Mechanical Strength Test)	-	0	-
22(Construction verification related test)	-	0	-
23(General)	-	0	-
24(Components)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
28(Screw test and connections)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
30.1(Ball pressure test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.2(Needle Flame Test)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0.01	-
8.1.5(Live parts of built-in appliances)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classifications)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
7(Marking and instructions)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	0	-
10.2(Current input)	-	0	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	0	-
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
14(Transient Over Voltages)	-	0	-
15.0(General)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.2(Spillage Test)	-	0	-
15.3(Humidity Test)	-	0	-
16.0(General)	-	0	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
18(Endurance Test requirements and tests)	-	0	-
19(Abnormal Operation)	-	0	-
20(Stability test)	-	0	-
21(Mechanical Strength Test)	-	0	-
22(Construction verification related test)	-	0	-
23(General)	-	0	-
24(Components)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
28(Screw test and connections)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
30.1(Ball pressure test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.2(Needle Flame Test)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classifications)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-

13 Dec, 2026

-
Included w.e.f 19.05.2025 Exclusion: Cl 19.11.4.1-Cl 19.11.4.7(EMI/EMC)

1841

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

All size

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Mechanical Testing)	-	3500	-
6.0(Workmanship)	-	500	-
4.1(Sulphur-Percentage by mass)	-	500	-
8.0(Straightness)	-	500	-
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	500	-
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	500	-
11.1(Surface Protection)	-	500	-
11.2(Surface Protection)	-	500	-
13.1.3(Tensile Strength)	-	500	-
13.1.1(Yield Stress)	-	500	-
13.1.2(Elongation)	-	500	-
13.2(Flattening Test)	-	500	-
13.3(Bend Test (Strip))	-	500	-
13.4(Bend Test (Whole Tube))	-	500	-
13.5(Drift Expansion Test)	-	500	-
13.6(Crush Test)	-	500	-
19.1.3(Height of Internal Fin)	-	500	-
6.0(Workmanship)	-	500	-
4.1(Sulphur-Percentage by mass)	-	500	-
4.1(Phosphorus-Percentage by mass)	-	500	-
8.0(Straightness)	-	500	-
19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia)	-	500	-
19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness)	-	500	-
11.1(Surface Protection)	-	500	-
11.2(Surface Protection)	-	500	-
13.1.3(Tensile Strength)	-	500	-
13.1.1(Yield Stress)	-	500	-
13.1.2(Elongation)	-	500	-
13.2(Flattening Test)	-	500	-
13.3(Bend Test (Strip))	-	500	-
13.4(Bend Test (Whole Tube))	-	500	-
13.5(Drift Expansion Test)	-	500	-
13.6(Crush Test)	-	500	-
19.1.3(Height of Internal Fin)	-	500	-
Cl. 10 Annex B Cl. 17, Cl. 19(Moment of inertia)	-	500	-
Cl. 10 Annex B Cl. 17, Cl. 19(Radius of gyration)	-	500	-
Cl. 10 Annex B Cl. 17, Cl. 19(Modulus of section)	-	500	-
Cl. 10 Annex B Cl. 17, Cl. 19(Area of cross section)	-	500	-
Cl. 19.1.3(Internal Fin Height)	-	500	-
Cl. 10 Annex B Cl. 17, Cl. 19(Mass)	-	500	-
Cl. 9(Length)	-	500	-
4.0 (a)(Carbon as C - IS:8811)	-	500	-
4.0 (b)(Manganese as Mn - IS:8811)	-	500	-
4.0 (b)(Manganese as Mn - IS:8811)	-	500	-
4.0 (c)(Micro Alloying elements (Nb+V+Ti))	-	500	-
4.0 (f)(Nitrogen content)	-	500	-
9(Length -SOP MT-23)	-	500	-
10(Outside diameter-SOP MT-23)	-	500	-
10(Thickness - SOP MT-23)	-	500	-
10(Mass of Tube-SOP MT-23)	-	500	-
10(Area of Cross Section)	-	500	-
4(Material)	-	500	-
4.1(Phosphorus-Percentage by mass)	-	500	-
13(Mechanical Testing)	-	0	-
Cl. 10 Annex B Cl. 17, Cl. 19(Moment of inertia)	-	0	-
Cl. 10 Annex B Cl. 17, Cl. 19(Radius of gyration)	-	0	-
Cl. 10 Annex B Cl. 17, Cl. 19(Modulus of section)	-	0	-
Cl. 10 Annex B Cl. 17, Cl. 19(Area of cross section)	-	0	-
Cl. 19.1.3(Internal Fin Height)	-	0	-
Cl. 10 Annex B Cl. 17, Cl. 19(Mass)	-	0	-
Cl. 9(Length)	-	0	-
4.0 (a)(Carbon as C - IS:8811)	-	0	-
4.0 (b)(Manganese as Mn - IS:8811)	-	0	-
4.0 (b)(Manganese as Mn - IS:8811)	-	0	-
4.0 (c)(Micro Alloying elements (Nb+V+Ti))	-	0	-
4.0 (f)(Nitrogen content)	-	0	-
9(Length -SOP MT-23)	-	0	-
10(Outside diameter-SOP MT-23)	-	0	-
10(Thickness - SOP MT-23)	-	0	-
10(Mass of Tube-SOP MT-23)	-	0	-
10(Area of Cross Section)	-	0	-
4(Material)	-	0	-

19 Nov, 2027

-
Included w.e.f 22.07.2025

1842

KRISHNA DIGITAL MATERIAL TESTING LABORATORY LLP, BHOPAL

8168706

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

M30 TO M50

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	100	0
Clause 7.1.3 (Colour and Texture)	-	100	0
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	100	0
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	250	0
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	250	0
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	250	0
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	250	0
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	250	0
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	250	0
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	150	0
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	150	0
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	150	0
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	150	0
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	100	0
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	100	0
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	200	0
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	200	0
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	200	0
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	150	00
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	100	0
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	500	0
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	500	0
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1000	0
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1000	0
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	1000	0
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	800	0
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	800	0
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	750	0
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	1500	0
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	1500	0
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	1200	0
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	1200	0
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	1500	0
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	1200	0
Clause 7.3, Annex G(Individual Breaking Load)	-	1100	0
Clause 7.3, Annex G(Average Breaking Load)	-	1100	0

19 Aug, 2027

-
-

1843

KRISHNA DIGITAL MATERIAL TESTING LABORATORY LLP, BHOPAL

8168706

IS 15658 (2006)

Precast concrete blocks for paving - Specification

Precast Concrete Paving Blocks

8350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.1 & 7.1(VISUAL INSPECTION)	-	100	-
6.1.2(Physical requirement)	-	100	-
6.1.3(Physical requirement)	-	100	-
6.1.4(Physical requirement)	-	100	-
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	100	-
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	100	-
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	100	-
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	100	-
B-1.3.2(MEAN INDIVIDUAL THICKNESS (of all eight test specimens), T)	-	200	-
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	100	-
B-1.3.3(INDIVIDUAL ASPECT RATIO (L/T) (of all eight test specimens))	-	100	-
B-5(AVERAGE ASPECT RATIO (L/T) (for eight test specimens))	-	100	-
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	100	-
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	100	-
B-5(INDIVIDUAL PLAN AREA, ASP (of all eight test specimens) )	-	100	-
B-5(AVERAGE PLAN AREA, ASP (for eight test specimens))	-	100	-
B-5(INDIVIDUAL WEARING FACE AREA, Asw (of all eight test specimens))	-	100	-
B-5(AVERAGE WEARING FACE AREA, Asw (for eight test specimens))	-	100	-
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	100	-
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	500	-
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-	1000	-
6.2.5.1(INDIVIDUAL COMPRESSIVE STRENGTH (Individual strength of eight test specimen))	-	500	-
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	1250	-
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	1150	-
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	500	-
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	500	-
Annex G-7(INDIVIDUAL FAILURE LOAD/UNIT LENGTH (Individual Failure Load of eight test specimen ))	-	200	-
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	750	-
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	1000	-
Annex-G-7(INDIVIDUAL BREAKING LOAD (Individual Load of eight test specimen ))	-	250	-
Annex-G-7(AVERAGE BREAKING LOAD)	-	250	-
6.2.4, Table 4(Water Absorption)	-	250	-

19 Aug, 2027

-
-

1844

KRISHNA DIGITAL MATERIAL TESTING LABORATORY LLP, BHOPAL

8168706

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

Cement Concrete Flooring Tiles

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	-
Cl 11(Suface Finish)	-	500	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	500	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.5(Water absorption)	-	500	-
Cl 12.6(Wet transverse strength )	-	1000	-
Cl 12.7(Resistance to wear)	-	2500	-
Cl 12.2(Concavity & Convexity )	-	500	-

19 Aug, 2027

-
-

1845

KRISHNA DIGITAL MATERIAL TESTING LABORATORY LLP, BHOPAL

8168706

IS 303 (1989)

Plywood for General Purposes -

General Purpose Plywood

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	250	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	250	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	250	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	250	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	250	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1000	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	1000	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1000	-
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	500	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	500	-

19 Aug, 2027

-
-

1846

KRISHNA DIGITAL MATERIAL TESTING LABORATORY LLP, BHOPAL

8168706

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

PPC

9450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500
7 -Table 2- i(Fineness 4031 Part 2)	-	500
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1500
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	500
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500

19 Aug, 2027

-
-

1847

KRISHNA DIGITAL MATERIAL TESTING LABORATORY LLP, BHOPAL

8168706

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

33 Grade 43 Grade 53 Grade 53 S Grade

9450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)
7 Table-3 iii a(Setting Time Initial)	-	500
7 Table-3 iii b(Setting Time Final)	-	500
7 Table-3 i.(Fineness)	-	500
7 Table-3 ii a(Expansion by Le Chatelier)	-	500
7 Table-3 ii b(Expansion by Autoclave)	-	500
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000
6.1 Table-2 vi(Loss on ignition)	-	500
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	500
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	500
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	500
6.1 Table-2 iv(Magnesia)	-	500
6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	500
6.1 Table-2 iii.(Insoluble residue)	-	500

19 Aug, 2027

-
-

1848

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 7283 (1992)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

All Grade / Type / Size / Designation as per IS 7283

11240 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Workmanship)	-	500	-
Cl 7(Diameter & Out Of Round)	-	1200	-
Cl 8(Decarburization)	-	400	-
Cl 9(Inclusion)	-	400	-
Cl 10(Hardenability)	-	7000	-
Cl 11(Size)	-	400	-
Cl 5(Material Test)	-	1340	-

17 Feb, 2028

-
-

1849

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 4003 : Part 2 (1986)

Specification for pipe wrenches: Part 2 heavy duty (First Revision)

All Grade/Type/Size/Designation per the IS 4003 (P-II)

9080 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions- Nominal Size)	-	1200	-
3(Dimensions-Capacity D min)	-	0	-
3(Dimensions- Capacity D max)	-	0	-
3(Dimensions- Jaw Thickness,T min)	-	0	-
3(Dimensions- Length of movablejae, l1)	-	0	-
3(Dimensions- Length of Handle, l2)	-	0	-
3(Dimensions- Width of Nut, N)	-	0	-
5(Hardness- Movable and heel Jaws)	-	400	-
5(Hardness- Shank of movable Jaw)	-	400	-
5(Hardness- Adjustable nut)	-	0	-
6.1(Manufacture- Handel)	-	0	-
6.1(Manufacture- Handel)	-	0	-
6.2(Movable Jaw)	-	0	-
6.2(Movable Jaw)	-	0	-
6.3(Heel jaw)	-	0	-
6.3(Heel jaw)	-	0	-
6.4(Adjusting Nut)	-	0	-
6.4(Adjusting Nut)	-	0	-
6.4(Adjusting Nut)	-	0	-
6.5(Springs)	-	0	-
6.5(Springs)	-	0	-
7(Workmanship & Finish)	-	500	-
7(Workmanship & Finish)	-	0	-
7(Workmanship & Finish)	-	0	-
7(Workmanship & Finish)	-	0	-
8(Operation)	-	0	-
8(Operation)	-	0	-
11.1(Static Load Test)	-	2000	-
11.1(Static Load Test)	-	0	-
4 AND AS PER IS 1570 PART 2(MANGANESE)	-	0	-
4 AND AS PER IS 1570 PART 2(PHOSPHORUS)	-	0	-
4 AND AS PER IS 1570 PART 2(SULPHUR)	-	0	-
4 AND AS PER IS 1570 PART 2(CARBON)	-	0	-
4 AND AS PER IS 4454 PART 1(MICRO ALLOY)	-	2340	0
4 AND AS PER IS 4454 PART 1(NITROGEN)	-	0	-
4 AND AS PER IS 4454 PART 1(cu + cr + ni)	-	0	-
4 AND AS PER IS 4454 PART 1(SULPHUR+ PHOSPHORUS)	-	0	-
4 AND AS PER IS 4454 PART 1(COPPER)	-	240	-
4 AND AS PER IS 4454 PART 1(PHOSPHORUS)	-	0	-
4 AND AS PER IS 4454 PART 1(SULPHUR)	-	0	-
4 AND AS PER IS 4454 PART 1(MANGANESE)	-	0	-
4 AND AS PER IS 4454 PART 1(SILICON)	-	0	-
4 AND AS PER IS 4454 PART 1(CARBON)	-	0	-
4 AND AS PER IS 2707(MICRO ALLOY)	-	0	-
4 AND AS PER IS 2707(SILICON)	-	400	-
4 AND AS PER IS 2707(MANGANESE)	-	400	-
4 AND AS PER IS 2707(PHOSPHORUS)	-	400	-
4 AND AS PER IS 2707(SULPHUR)	-	400	-
4 AND AS PER IS 2707(CARBON)	-	400	-

17 Feb, 2028

-
-

1850

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 841 (1983)

Specification for steel hammers (Second Revision)

All Grade/Type/Size/Designation as per IS 841

4140 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material Testing)	-	1340	-
4(Hardness Testing)	-	400	-
5(Dimensions)	-	1200	-
6(Mass)	-	200	-
9(Workmanship and finish)	-	500	-
10(Soundness and assembly test)	-	500	-

17 Feb, 2028

-
-

1851

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 3063 (1994)

Fasteners - Single coil rectangular section spring lock washers specification (Second Revision)

All Grade/Type/Size/Designation as per IS 3063

8140 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions & Tolerance)	-	1200	-
5(Material Testing)	-	740	-
11(Hardness (HV))	-	400	-
11.2(Permanent set test)	-	500	-
11.3(Permanent Load test)	-	4800	-
11.4(Twist test)	-	500	-

17 Feb, 2028

-
-

1852

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 4509 (1992)

Ring slugging wrenches (Spanners) - specification (First Revision)

Grade/Type/Size/Designation as per IS 4509

2840 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions- s)	-	1200	Rs. 1200/- for complete dimensional inspection.
3(Dimensions- a)	-	0	-
3(Dimensions- b)	-	0	-
3(Dimensions- l)	-	0	-
5(Hardness)	-	400	-
6(Workmanship and Finish)	-	500	-
4(Chemical Test)	-	740	- C, Si, Mn, S, P- Rs. 100/- per Element - Cr, V - Rs. 120/- per Element

17 Feb, 2028

-
-

1853

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 4072 (1975)

Specification for steel for spring washers (First Revision)

All Grade/Type/Size/Designation as per IS 4072

3340 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 2.1, 5.1, 5.2 Table 1 (Carbon)	-	100	-
Cl. 2.1, 5.1, 5.2 Table 1 (Silicon)	-	100	-
Cl. 2.1, 5.1, 5.2 Table 1 (Manganese)	-	100	-
Cl. 2.1, 5.1, 5.2 Table 1 (Sulphur)	-	100	-
Cl. 2.1, 5.1, 5.2 Table 1 (Phosphorous)	-	100	-
Cl. 2.1, 5.1, 5.2 Table 1 (Chromium)	-	120	-
Cl. 2.1, 5.1, 5.2 Table 1 (Vanadium)	-	120	-
6.2(DeCarburization)	-	900	-
7(Dimensions & Tolerance)	-	1200	-
8(Calculation of Weight)	-	500	-

17 Feb, 2028

-
-

1854

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 3748 (1990)

Tool and die steels - Specification (Second Revision)

All Grade/Type/Size/Designation as per IS 3748

14460 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1, 7.2, 12.1 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl 7.1, 7.2, 12.1 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl 7.1, 7.2, 12.1 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl 7.1, 7.2, 12.1 & Table 1(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	-
Cl 7.1, 7.2, 12.1 & Table 1(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	-
Cl 7.1, 7.2, 12.1 & Table 1(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	-
Cl 7.1, 7.2, 12.1 & Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	-
Cl 7.1, 7.2, 12.1 & Table 1(Tungsten- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	-
Cl 7.1, 7.2, 12.1 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl 7.1, 7.2, 12.1 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl 7.1, 7.2, 12.1 & Table 1(Cobalt- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	-
6(Freedom from defects)	-	500	-
9.1(Hardness , max-IS 1500 )	-	400	-
10(Dimensions and Tolerances, mm)	-	1200	-
13(Ultra sound testing)	-	1000	-
14.5(v) Magnaflux test)	-	1000	-
14.3(iii)Macro etch test)	-	1000	-
14.6(vi) Metallographic test)	-	900	Microstructure - Rs. - 500/- Inclusion Rating = Rs. 400/-
14.7(vii) Diistribution of carbides)	-	500	-
14.1(i) Shephard's P.F.Test)	-	5500	-
14.2(ii)Fracture disc test)	-	500	-
14.4(iv)Crop test upto 45mm dia)	-	500	-
Cl 7.1, 7.2, 12.1 & Table 1(Tin- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	-

17 Feb, 2028

-
-

1855

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 9516 (1980)

Specification for heat resisting steels

All Grade/Type/Size/Designation as per IS 9516

9100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1,5.2,5.3 Table 4(Carbon-Relevant parts of IS 228)	-	100	-
5.1,5.2,5.3 Table 4(Silicon-Relevant parts of IS 228)	-	100	-
5.1,5.2,5.3 Table 4(Manganese-Relevant parts of IS 228)	-	100	-
5.1,5.2,5.3 Table 4(Nickel-Relevant parts of IS 228)	-	120	-
5.1,5.2,5.3 Table 4(Chromium-Relevant parts of IS 228)	-	120	-
5.1,5.2,5.3 Table 4(Sulphur-Relevant parts of IS 228)	-	100	-
5.1,5.2,5.3 Table 4(Phosphorous-Relevant parts of IS 228)	-	100	-
5.3(Molybdenum-Relevant parts of IS 228)	-	120	-
5.3(Vanadium-Relevant parts of IS 228)	-	120	-
5.3(Copper-Relevant parts of IS 228)	-	120	-
4(FREEDOM FROM DEFECTS)	-	500	-
6, Table 2(i) Yield stess/.2% Proof stress, Mpa)	-	800	-
6, Table 2(ii)Ultimate Tensile Strength, Mpa)	-	3300	-
6, Table 2(iii)Elongation, %)	-	300	-
7(DIMENSIONS AND TOLERANCE)	-	1200	-
6, Table 2(iv) Hardness, HBW)	-	400	-
5.1,5.2,5.3 Table 4(Nitrogen-Relevant parts of IS 228)	-	1500	-

17 Feb, 2028

-
-

1856

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 3195 (1992)

Steel for the manufacture of volute and helical springs (For Railway Rolling Stock) - Specification (Third Revision)

Grade/Type/Size/Designation as per IS 3195

4260 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3, 6.1, 6.2 & Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl. 3, 6.1, 6.2 & Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl. 3, 6.1, 6.2 & Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl. 3, 6.1, 6.2 & Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl. 3, 6.1, 6.2 & Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl. 3, 6.1, 6.2 & Table 1(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	-
Cl. 3, 6.1, 6.2 & Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	-
Cl. 3, 6.1, 6.2 & Table 1(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	120	-
7(Hardness)	-	400	-
10(Freedom from defects)	-	500	-
8(Decarburisation)	-	400	-
9(Inclusion rating)	-	400	-
11( DIMENSIONS AND TOLERANCES)	-	1200	Dimensions & Tolerances= Rs. 1200/-
12(Calculation of mass)	-	500	-

17 Feb, 2028

-
-

1857

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 9550 (2001)

Bright steel bars - Specification (First Revision)

All Grade/Type/Size/Designation as per IS 9550

17740 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6(Parameter as per requiremnt of purchaser.)	-	1340	Charges for Chemical Composition.
7(Mechancial Properties)	-	10600	- Surface Roughness test = Rs. 300/- - Mechanical Testing (Ts, Ys, %el) - Rs. 3900/- - Hardenability = 5000/- - Inclusion rating = 400/- - Microstructure = 500/- - Depth of defect by microscope method - 500/-
9.1(Decarburisation)	-	400	- Decarburization = Rs. 400/-
8.1 and 8.2(Dimensions and Tolerances, mm)	-	1200	-
13(Surface Protection)	-	4200	- Grain Size- Rs. 400/- Radiography testing -800/- DPT - 1000/- UT -1000/- MPI -1000/-)

17 Feb, 2028

-
-

1858

UL INDIA PRIVATE LIMITED, BENGALURU

6120526

IS 14286 : Part 1 : Sec 4 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-4: Special requirements for testing of thin-film CuInGASSe2 based photovoltaic PV modules Third Revision

PHOTOVOLTAIC (PV) MODULE

2384500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	30000	-
Cl-11.1(Visual inspection (MQT 01))	-	30000	-
Cl-11.2(Maximum power determination (MQT 02))	-	26000	-
Cl-11.3(Insulation test (MQT 03))	-	70000	-
Cl-11.4(Measurement of temperature coefficients (MQT 04))	-	100000	-
Cl-11.5(Measurement of nominal module operating temperature (NMOT) (MQT 05))	-	0	-
Cl-11.6(Performance at STC (MQT 06.1) and NMOT (MQT 06.2)	-	42000	-
Cl-11.7(Performance at low irradiance (MQT 07))	-	19500	-
Cl-11.8(Outdoor exposure test (MQT 08))	-	80000	-
Cl-11.9(Hot-spot endurance test (MQT 09))	-	25000	-
Cl-11.10(UV preconditioning test (MQT 10))	-	120000	-
Cl-11.11(Thermal cycling test (MQT 11))	-	400000	-
Cl-11.12(As per IEC 61215-1:2016)	-	250000	-
Cl-11.13(Damp heat test (MQT 13))	-	400000	-
Cl-11.14(Robustness of terminations test (MQT 14))	-	12000	-
Cl-11.15(Robustness of terminations test (MQT 14))	-	65000	-
Cl-11.16(Static mechanical load test (MQT 16))	-	20000	-
Cl-11.17(Hail test (MQT 17))	-	20000	-
Cl-11.18(Bypass diode testing (MQT 18))	-	20000	-
Cl-11.19(Stabilization (MQT 19))	-	150000	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	80000	-
11.21(Potential induced degradation test (MQT 21))	-	350000	-
11.22(Bending test (MQT 22))	-	70000	-
5(Marking and documentation)	-	5000	-

12 May, 2027

-
Included w.e.f.09.04.2025

1859

MARQUIS TECHNOLOGIES PRIVATE LIMITED, NOIDA

8175126

IS 16103 : Part 2 (2012)

Led modules for general lighting: Part 2 performance requirements

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Dimensions)	-	500	-
7(Module Power)	-	2000	-
8(Light Output)	-	5000	-
9(Chromaticity Coordinates, Correlated colour temperature and colour rendering)	-	5000	-
10(LED Module Life)	-	45000	-
12(Information for Luminaire design)	-	500	-
13(Test for Emission (Radiated and Conducted) of radio frequency distribution)	-	0	-

13 Dec, 2026

-
Included w.e.f 19.05.2025

1860

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 4296 : Part 1 (2016)

Tools for pressing: Part 1 round punches with 60 degrees conical head and straight shank (Second Revision)

All Grade/Type/Size/Designation as per IS 4296-1

2820 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions & Tolerance)	-	1500	-
4(Material Testing)	-	1220	- C, Si, P, Mn, S - Rs. 100/- per element - Ni, Cr, V, Mo, Co, W - Rs. 120/- per element
6.2(Hardness (HRC))	-	400	-

17 Feb, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number