BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14028 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

1921

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 1989 : Part 2 (1986)

Specification for leather safety boots and shoes: Part 2 for heavy metal industries (Fourth Revision)

ALL

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	500	-
7(Design)	-	500	-
8(a) Upper Leather)	-	400	-
8(b) Lining Leather)	-	400	-
8(c) Bottom Material)	-	500	-
8(d) Steel Toe Cap)	-	400	-
8(e) Tape)	-	300	-
8(f) Bottom Filling)	-	400	-
8(g) Eyelet)	-	300	-
8(h) Toe Compound)	-	400	-
8(i) Threads)	-	300	-
8(j) Rivets)	-	400	-
8(k) Screw Wire)	-	500	-
8(l) Heel Pin)	-	500	-
8(m) Shank)	-	500	-
8(n) Laces)	-	400	-
8(o) Tongue Lining)	-	500	-
8(p) Adhesive)	-	300	-
8(q) Strengthening Piece)	-	300	-
8(r) Leather Components)	-	500	-
9(Manufacture)	-	400	-
10(Finish)	-	300	-
11(a) Boots with Leather Sole and Heel)	-	500	-
11(b) Boots with Rubber Sole and Heel)	-	400	-
12(Performance Test)	-	400	-
13(Design)	-	500	-
14(a) Upper Leather)	-	400	-
14(b) Lining Leather)	-	500	-
14(c) Bottom Material)	-	400	-
14(d) Steel Toe Cap)	-	400	-
14(e) Tape)	-	400	-
14(f) Bottom Filling)	-	500	-
14(g) Eyelet)	-	500	-
14(h) Toe Compound)	-	400	-
14(i) Threads)	-	300	-
14(j) Rivets)	-	300	-
14(k) Screw Wire)	-	400	-
14(l) Heel Pin)	-	400	-
14(m) Shank)	-	400	-
14(n) Laces)	-	400	-
14(o) Tongue Lining)	-	400	-
14(p) Adhesive)	-	400	-
14(q) Leather Components)	-	400	-
15(Manufacture)	-	300	-
16(Finish)	-	400	-
17(a) Shoes with Leather Sole and Heel)	-	500	-
17(b) Shoes with Rubber Sole and Heel)	-	500	-
18(Performance Test)	-	1000	-
4(Marking)	-	300	-
7(Design)	-	400	-
8(a) Upper Leather)	-	1000	-
8(b) Lining Leather)	-	1000	-
8(c) Bottom Material)	-	1000	-
8(d) Steel Toe Cap)	-	400	-
8(e) Tape)	-	500	-
8(f) Bottom Filling)	-	1000	-
8(g) Eyelet)	-	400	-
8(h) Toe Compound)	-	400	-
8(i) Threads)	-	400	-
8(j) Rivets)	-	400	-
8(k) Screw Wire)	-	300	-
8(l) Heel Pin)	-	300	-
8(m) Shank)	-	300	-
8(n) Laces)	-	400	-
8(o) Tongue Lining)	-	400	-
8(p) Adhesive)	-	400	-
8(q) Strengthening Piece)	-	400	-
8(r) Leather Components)	-	400	-
9(Manufacture)	-	400	-
10(Finish)	-	400	-
11(a) Boots with Leather Sole and Heel)	-	400	-
11(b) Boots with Rubber Sole and Heel)	-	400	-
12(Performance Test)	-	500	-
13(Design)	-	400	-
14(a) Upper Leather)	-	400	-
14(b) Lining Leather)	-	400	-
14(c) Bottom Material)	-	500	-
14(d) Steel Toe Cap)	-	400	-
14(e) Tape)	-	400	-
14(f) Bottom Filling)	-	400	-
14(g) Eyelet)	-	500	-
14(h) Toe Compound)	-	500	-
14(i) Threads)	-	400	-
14(j) Rivets)	-	400	-
14(k) Screw Wire)	-	300	-
14(l) Heel Pin)	-	400	-
14(m) Shank)	-	300	-
14(n) Laces)	-	300	-
14(o) Tongue Lining)	-	300	-
14(p) Adhesive)	-	300	-
14(q) Leather Components)	-	500	-
15(Manufacture)	-	400	-
16(Finish)	-	400	-
17(a) Shoes with Leather Sole and Heel)	-	500	-
17(b) Shoes with Rubber Sole and Heel)	-	500	-
18(Performance Test)	-	1000	-
4(Marking)	-	400	-
7(Design)	-	400	-
8(a) Upper Leather)	-	400	-
8(b) Lining Leather)	-	400	-
8(c) Bottom Material)	-	300	-
8(d) Steel Toe Cap)	-	400	-
8(e) Tape)	-	300	-
8(f) Bottom Filling)	-	400	-
8(g) Eyelet)	-	300	-
8(h) Toe Compound)	-	400	-
8(i) Threads)	-	400	-
10(Finish)	-	400	-
8(j) Rivets)	-	400	-
8(k) Screw Wire)	-	300	-
8(l) Heel Pin)	-	400	-
8(m) Shank)	-	400	-
8(n) Laces)	-	300	-
8(o) Tongue Lining)	-	300	-
8(p) Adhesive)	-	400	-
8(q) Strengthening Piece)	-	400	-
8(r) Leather Components)	-	500	-
9(Manufacture)	-	400	-
11(a) Boots with Leather Sole and Heel)	-	400	-
11(b) Boots with Rubber Sole and Heel)	-	400	-
12(Performance Test)	-	1000	-
13(Design)	-	400	-
14(a) Upper Leather)	-	400	-
14(b) Lining Leather)	-	300	-
14(c) Bottom Material)	-	400	-
14(d) Steel Toe Cap)	-	400	-
14(e) Tape)	-	300	-
14(f) Bottom Filling)	-	400	-
14(g) Eyelet)	-	400	-
14(h) Toe Compound)	-	400	-
14(i) Threads)	-	300	-
14(j) Rivets)	-	400	-
14(k) Screw Wire)	-	300	-
14(l) Heel Pin)	-	300	-
14(m) Shank)	-	400	-
14(n) Laces)	-	400	-
14(o) Tongue Lining)	-	400	-
14(p) Adhesive)	-	500	-
14(q) Leather Components)	-	400	-
15(Manufacture)	-	500	-
16(Finish)	-	400	-
17(a) Shoes with Leather Sole and Heel)	-	300	-
17(b) Shoes with Rubber Sole and Heel)	-	400	-
18(Performance Test)	-	1000	-

26 Aug, 2027

-
Included w.e.f.18.08.2025

1922

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 2 : Sec 74 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 74 Portable immersion heaters

175000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	Additional Testing Charge For EMI/EMC:- 20,0000/-
8(Protection against access to live parts)	-	2500	-
10(Power input and current)	-	5000	-
10(Power input and current)	-	5000	-
11(Heating)	-	10000	-
13.1 &13.2(Leakage current test)	-	5000	-
13.1 &13.3(Electric strength test)	-	5000	-
14(Transient overvoltages)	-	5000	-
15(Moisture resistance)	-	5000	-
15.3(Moisture resistance)	-	10000	-
16.1 &16.2(Leakage current test)	-	5000	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	5000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	10000	-
20.1(Stability and mechanical hazards)	-	5000	-
20.2(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	2500	-
22(Construction)	-	5000	-
23(Internal wiring)	-	5000	-
24(Components)	-	5000	-
24.101(Components)	-	0	-
25("Supply connection and external flexible cords")	-	5000	-
26("Terminals for external conductors")	-	5000	-
27(Provision for earthing)	-	5000	-
28(Screws and connections)	-	5000	-
29("Clearances, creepage distances and solid insulation")	-	5000	-
30(Resistance to heat and fire)	-	5000	-
30.101(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	2500	-
32("Radiation, toxicity and similar hazards")	-	2500	-
Cl 19.11.4.1(Electrostatic discharges)	-	25000	-
Cl 19.11.4.2(Radiated fields)	-	45000	-
Cl 19.11.4.3(Fast transient bursts)	-	25000	-
Cl 19.11.4.4(Voltage surges)	-	25000	-
Cl 19.11.4.5(Immunity to conducted disturbances)	-	30000	-
Cl 19.11.4.6(Voltage dips and interruptions)	-	25000	-
Cl 19.11.4.7(Harmonics and inter-harmonics)	-	25000	-
Cl 19.11.4.8(Abnormal operation)	-	10000	-

26 Sep, 2027

-
Included w.e.f.21.08.2025

1923

Stellar Test House, Noida

8171606

IS 427 (2013)

Distemper, dry, colour as required - Specification (Third Revision)

All Grade and Types

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.1(Lead restriction)	-	500	-
4.2.2 & 7, Table-1(iv)(Colour)	-	1000	-
4.2.2 & 7, Table-1(v)(Fastness to light)	-	1500	-
4.2.2 & 7, Table-1(vii)(Recoating properties)	-	500	-
4.2.2 & 7, Table-1(viii)(Resistance to alkali)	-	500	-
4.2.2 & 7, Table-1(ix)(Resistance to dry rubbing)	-	500	-
4.1(Form and Condition)	-	200	-
4.2.1(Composition)	-	300	-
4.2.2 & 7, Table-1(i)(Drying time)	-	500	-
4.2.2 & 7, Table-1(ii)(Consistency)	-	500	-
4.2.2 & 7, Table-1(iii)(Finish)	-	500	-
4.2.2 & 7, Table-1(vi)(Residue on seive)	-	1000	-

26 Sep, 2028

-
Included w.e.f. 14.08.2025

1924

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	100	-
3(Type of Fitting)	-	100	-
4(Size Designation)	-	100	-
5(Colour of fittings)	-	200	-
7.1,Table 1(Wall thickness)	-	500	-
7.2 ,Table 2&3(Socket Dimensions)	-	1000	-
7.3(Dimensions of waste trap(Nahani Trap)	-	500	-
8(Sealing Rings)	-	1000	-
10(Workmanship)	-	200	-
11(Design requirements)	-	200	-
11.1(Solvent cement type or Rubber ring type)	-	1000	-
11.2(Socket and spigot configeration)	-	500	-
11.4,Table 5(Vent cowl)	-	500	-
11.5,Table 6(Pipe Clips)	-	500	-
12(Physical test requirements)	-	0	-
12.1(Visual appearance)	-	200	-
12.2(Stress relief test)	-	1500	-
12.3(Vicat softening tempewrature)	-	1500	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	1500	-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	2000	-
Cl.15, Annex B(Sulphated Ash Content)	-	1500	-
16(Mechanical Properties)	-	5000	-
16.1(Impact test)	-	2000	-
17(Watet tightness of joint)	-	1000	-
12.4(Effect on water test)	-	5000	-
7.4(Chamfer)	-	500	-
11.3(Access Openings)	-	500	-
Table 4(Dimension of Access Openings)	-	500	-
Cl 12.4(Effect on Water Lead (first extraction))	-	0	-
Cl 12.4(Effect on Water Lead (third extraction))	-	0	-
Cl 12.4(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	0	-
Cl 12.4(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 12.4(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-
19(Marking)	-	0	-
3(Type of Fitting)	-	0	-
4(Size Designation)	-	0	-
5(Colour of fittings)	-	0	-
7.1,Table 1(Wall thickness)	-	0	-
7.2 ,Table 2&3(Socket Dimensions)	-	0	-
7.3(Dimensions of waste trap(Nahani Trap)	-	0	-
8(Sealing Rings)	-	0	-
10(Workmanship)	-	0	-
11(Design requirements)	-	0	-
11.1(Solvent cement type or Rubber ring type)	-	0	-
11.2(Socket and spigot configeration)	-	0	-
11.4,Table 5(Vent cowl)	-	0	-
11.5,Table 6(Pipe Clips)	-	0	-
12(Physical test requirements)	-	0	-
12.1(Visual appearance)	-	0	-
12.2(Stress relief test)	-	0	-
12.3(Vicat softening tempewrature)	-	0	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	0	-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	0	-
Cl.15, Annex B(Sulphated Ash Content)	-	0	-
16(Mechanical Properties)	-	0	-
16.1(Impact test)	-	0	-
17(Watet tightness of joint)	-	0	-
12.4(Effect on water test)	-	0	-
7.4(Chamfer)	-	0	-
11.3(Access Openings)	-	0	-
Table 4(Dimension of Access Openings)	-	0	-
Cl 12.4(Effect on Water Lead (first extraction))	-	0	-
Cl 12.4(Effect on Water Lead (third extraction))	-	0	-
Cl 12.4(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	0	-
Cl 12.4(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 12.4(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-

08 May, 2028

-
included w.e.f 11-12-2025.

1925

TUV SUD SOUTH ASIA PRIVATE LIMITED RANIPET

6191806

IS 15844 : Part 3 (2024)

Sports Footwear Part 3 Professional Sports Footwear

79900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Design)	-	500	-
Cl-6(Size and Fittings)	-	500	-
Cl.7.1.1(Upper to Mid Sole/Out Sole, Upper to Composite Sole (Applicable Only When the Sole is Composite) and Out Sole to Mid Sole (Multilayer, if Present), Bond Performance)	-	600	-
Cl.7.1.2(Energy Absorption at Seat Region)	-	800	-
Cl.7.1.3(Complete Shoe Flexing)	-	1600	-
Cl.7.1.4(Washability)	-	2000	-
Cl.7.1.5(Slip Resistance)	-	2800	-
Cl.7.1.6(Heel Drop)	-	600	-
Cl.7.2 Table-2 S.No- (i)("Flexing resistance, Min a) Dry condition b) Wet condition")	-	1000	-
Cl.7.2 Table-2 S.No- (ii)(Tear strength (average force), N, Min)	-	440	-
Cl.7.2 Table-2 S.No- (iii)("Colour fastness rubbing a-Dry b-Wet")	-	480	-
Cl.7.2 Table-2 S.No- (iv)("a) Water vapour permeability b) Water vapour coefficient")	-	2800	-
Cl.7.2 Table-2 S.No- (v)(Stitch tear strength N/mm, Min)	-	440	-
Cl.7.2 Table-2 S.No- (vi)(Colour fastness to light grey scale rate)	-	800	-
Cl.7.2 Table-2 S.No- (vii)(Tensile strength)	-	440	-
Cl.7.2 Table-2 S.No- (viii)(Elongation at break, percent)	-	440	-
Cl.7.2 Table-2 S.No- (ix)("Abrasion test a) Dry b) Wet")	-	800	-
Cl.7.2 Table-3 S.No- (i)(Breaking strength, N/mm, Min)	-	440	-
Cl.7.2 Table-3 S.No- (ii)(Elongation at break, percent, Min)	-	440	-
Cl.7.2 Table-3 S.No- (iii)(Tear strength, N, Min)	-	440	-
Cl.7.2 Table-3 S.No- (iv)(Strength at needle perforation)	-	440	-
Cl.7.2 Table-3 S.No- (v)("Flexing resistance a-Dry condition, b) Wet condition")	-	1000	-
Cl.7.2 Table-3 S.No- (vi)("a) Water vapour permeability b) Water vapour coefficient")	-	2800	-
Cl.7.2 Table-3 S.No- (vii)(Hydrolysis resistance)	-	4000	-
Cl.7.2 Table-3 S.No- (viii)(Colour fastness to light grey scale rate)	-	800	-
Cl.7.2 Table-3 S.No- (ix)(Bursting strength)	-	440	-
Cl.7.3 Table-4 S.No- (i)(Tear strength, N, Min)	-	440	-
Cl.7.3 Table-4 S.No- (ii)("Abrasion resistance, a) Dry b) Wet ")	-	800	-
Cl.7.3 Table-4 S.No- (iii)(Colour fastness to rubbing, grey scale rate with 10 rubs on dry or wet, Min)	-	480	-
Cl.7.3 Table-4 S.No- (iv)(Colour fastness to perspiration (contact method) grey scale rate, Min)	-	480	-
Cl.7.3 Table-4 S.No- (v)("a-Water vapour permeability b-Water vapour coefficient")	-	2800	-
Cl.7.4 Table-5 S.No- (i)(Flexing index, Min)	-	400	-
Cl.7.4 Table-5 S.No- (ii)(Abrasion resistance)	-	800	-
Cl.7.4 Table-5 S.No- (iii)("a) Water absorption b) Water desorption")	-	800	-
Cl.7.5 Table-6 S.No- (i)("Abrasion resistance a) Dry condition b) Wet condition")	-	800	-
Cl.7.5 Table-6 S.No- (ii)("a) Water absorption b) Water desorption")	-	800	-
Cl.7.5 Table-6 S.No- (iii)(Heat resistance shrinkage linear, percent, Max)	-	800	-
Cl.7.6 Table-7 S.No- (i)(Abrasion resistance)	-	960	-
Cl.7.6 Table-7 S.No- (ii)("Flexing resistance a) Bennewart Method b) Ross flexing method")	-	1200	-
Cl.7.6 Table-7 S.No- (iii)(Hydrolysis resistance)	-	5200	-
Cl.7.6 Table-7 S.No- (iv)(Tear strength, N/mm, Min)	-	480	-
Cl.7.6 Table-7 S.No- (v)(Tensile strength)	-	480	-
Cl.7.6 Table-7 S.No- (vi)(Elongation at break percent, Min)	-	480	-
Cl.7.6 Table-7 S.No- (vii)(Compression set percent, Max)	-	800	-
Cl.7.7 Table-8 S.No- (i)("Compression set, percent, Max a) For EVA b) For all other material")	-	800	-
Cl.7.7 Table-8 S.No- (ii)(Split tear strength)	-	440	-
Cl.7.7 Table-8 S.No- (iii)(Heat shrinkage, percent, Ma)	-	800	-
Cl.7.7 Table-8 S.No- (iv)(Elongation at break, percent, Min)	-	440	-
Cl.7.8 Table-9 S.No- (i)(First dry collapsing load, hardness, N, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (ii)(Resilience, percent, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (iii)(Moisture resistance, percent, Min)	-	1000	-
Cl.7.8 Table-9 S.No- (iv)("a) Initial dry area shape retention, percent, Min b) Area shape retention after 10th collapse, dry, percent, Min ")	-	1000	-
Cl.7.8 Table-9 S.No- (v)(Peel strength, N/nm, Min)	-	1000	-
Cl.7.9 Table-10 S.No- (i)("Peel strength, N/mm, Min a) Initial b) After 5 000 wear cycles")	-	2400	-
Cl.7.9 Table-10 S.No- (ii)("Shear strength, kPa, Min a) Initial b) After 5 000 wear cycles")	-	2400	-
Cl.7.10 Table-11 S.No- (i)(Limit of useful extension, percent, Min)	-	1000	-
Cl.7.10 Table-11 S.No- (ii)(Needle strength, N/mm, Min)	-	440	-
Cl.7.11 Table-12 S.No- (i)(Breaking strength of lace)	-	600	-
Cl.7.11 Table-12 S.No- (ii)(Lace tag strength)	-	600	-
Cl.7.11 Table-12 S.No- (iii)(Lace to lace abrasion)	-	1200	-
Cl.7.11 Table-12 S.No- (iv)(Colour fastness to water (for lace) (Contact method))	-	480	-
Cl.7.11 Table-12 S.No- (v)(Strength of buckle/ski hook/D-ring,)	-	600	-
Cl.7.11 Table-12 S.No- (vi)("Corrosion resistance (applicable for all including decorative metal part) ")	-	800	-
Cl.7.11 Table-13 S.No- (i)(Corrosion resistance (applicable for metallic spikes))	-	800	-
Cl-7.12.1, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	5600	-
Cl-7.12.1, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl-7.12.1, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1200	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	2800	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	960	-
Cl-7.12.1, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	960	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	4000	-
Cl-7.12.1, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
Cl-7.12.1, Table no. 1 of IS 17011,(x)(pH)	-	400	-
Cl-7.12.1, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	4000	-
C-7.12.1, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1600	-
Cl-7.12.2(PVC is present in sports shoe)	-	1200	-
Cl-7.12.1, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	4000	-
Cl-7.12.1, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	960	-
Cl-7.12.1, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	2800	-
Cl-7.12.1, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1200	-
Cl- 8.1(Marking)	-	500	-

02 Dec, 2028

-
-

1926

Sleen India Biz venture Private Limited, Agra

9139736

IS 14478 (1997)

Plain bearings - Thick - Walled bushes, plain and flange type, full - Round (without any joint or slit) - Specification

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	1000	-
5.1(Tolerances)	-	1000	-
6(Material )	-	2500	-
7(Lubrication oil holes and oil grooves)	-	500	-
8(Surface roughiness)	-	3000	-
9(Designation)	-	500	-
10(Marking)	-	500	-
11(Packing)	-	500	-

15 May, 2027

-
Included w.e.f.26.08.2025

1927

Aaditech Test and Calibration Lab LLP

8179926

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

Rated voltage being not more than 250V include direct current (DC) supplied appliances and battery-operated appliances.

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	0	-
Cl-7(Marking and instructions)	-	1000	-
Cl-8(Protection against access to live parts)	-	500	-
Cl-10(Power input and current)	-	1000	-
Cl-11(Heating)	-	2000	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14(Transient overvoltages)	-	0	-
Cl-15(Moisture resistance)	-	2000	-
Cl-16(Leakage current and electric strength)	-	1000	-
Cl-17(Overload protection of transformers and associated circuits)	-	0	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	2000	-
Cl-20(Stability and mechanical hazards)	-	500	-
Cl-21(Mechanical strength)	-	1000	-
Cl-22(Construction)	-	500	-
Cl-23(Internal wiring)	-	1000	-
Cl-24(Components)	-	500	-
Cl-25(Supply connection and external flexible cords)	-	2000	-
Cl-26(Terminals for external conductors)	-	500	-
Cl-27(Provision for earthing)	-	1000	-
Cl-28(Screws and connections)	-	500	-
Cl-29(Clearances, creepage distances and solid insulation)	-	500	-
Cl-30(Resistance to heat and fire)	-	2000	-
Cl-31(Resistance to rusting)	-	1000	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	0	-
Cl-7(Marking and instructions)	-	0	-
Cl-8(Protection against access to live parts)	-	0	-
Cl-10(Power input and current)	-	0	-
Cl-11(Heating)	-	0	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	0	-
Cl-14(Transient overvoltages)	-	0	-
Cl-15(Moisture resistance)	-	0	-
Cl-16(Leakage current and electric strength)	-	0	-
Cl-17(Overload protection of transformers and associated circuits)	-	0	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	0	-
Cl-20(Stability and mechanical hazards)	-	0	-
Cl-21(Mechanical strength)	-	0	-
Cl-22(Construction)	-	0	-
Cl-23(Internal wiring)	-	0	-
Cl-24(Components)	-	0	-
Cl-25(Supply connection and external flexible cords)	-	0	-
Cl-26(Terminals for external conductors)	-	0	-
Cl-27(Provision for earthing)	-	0	-
Cl-28(Screws and connections)	-	0	-
Cl-29(Clearances, creepage distances and solid insulation)	-	0	-
Cl-30(Resistance to heat and fire)	-	0	-
Cl-31(Resistance to rusting)	-	0	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	0	-
Cl-7(Marking and instructions)	-	0	-
Cl-8(Protection against access to live parts)	-	0	-
Cl-10(Power input and current)	-	0	-
Cl-11(Heating)	-	0	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	0	-
Cl-14(Transient overvoltages)	-	0	-
Cl-15(Moisture resistance)	-	0	-
Cl-16(Leakage current and electric strength)	-	0	-
Cl-17(Overload protection of transformers and associated circuits)	-	0	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	0	-
Cl-20(Stability and mechanical hazards)	-	0	-
Cl-21(Mechanical strength)	-	0	-
Cl-22(Construction)	-	0	-
Cl-23(Internal wiring)	-	0	-
Cl-24(Components)	-	0	-
Cl-25(Supply connection and external flexible cords)	-	0	-
Cl-26(Terminals for external conductors)	-	0	-
Cl-27(Provision for earthing)	-	0	-
Cl-28(Screws and connections)	-	0	-
Cl-29(Clearances, creepage distances and solid insulation)	-	0	-
Cl-30(Resistance to heat and fire)	-	0	-
Cl-31(Resistance to rusting)	-	0	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	0	-
Cl-7(Marking and instructions)	-	0	-
Cl-8(Protection against access to live parts)	-	0	-
Cl-10(Power input and current)	-	0	-
Cl-11(Heating)	-	0	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	0	-
Cl-14(Transient overvoltages)	-	0	-
Cl-15(Moisture resistance)	-	0	-
Cl-16(Leakage current and electric strength)	-	0	-
Cl-17(Overload protection of transformers and associated circuits)	-	0	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	0	-
Cl-20(Stability and mechanical hazards)	-	0	-
Cl-21(Mechanical strength)	-	0	-
Cl-22(Construction)	-	0	-
Cl-23(Internal wiring)	-	0	-
Cl-24(Components)	-	0	-
Cl-25(Supply connection and external flexible cords)	-	0	-
Cl-26(Terminals for external conductors)	-	0	-
Cl-27(Provision for earthing)	-	0	-
Cl-28(Screws and connections)	-	0	-
Cl-29(Clearances, creepage distances and solid insulation)	-	0	-
Cl-30(Resistance to heat and fire)	-	0	-
Cl-31(Resistance to rusting)	-	0	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	0	-
Cl-7(Marking and instructions)	-	0	-
Cl-8(Protection against access to live parts)	-	0	-
Cl-10(Power input and current)	-	0	-
Cl-11(Heating)	-	0	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	0	-
Cl-14(Transient overvoltages)	-	0	-
Cl-15(Moisture resistance)	-	0	-
Cl-16(Leakage current and electric strength)	-	0	-
Cl-17(Overload protection of transformers and associated circuits)	-	0	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	0	-
Cl-20(Stability and mechanical hazards)	-	0	-
Cl-21(Mechanical strength)	-	0	-
Cl-22(Construction)	-	0	-
Cl-23(Internal wiring)	-	0	-
Cl-24(Components)	-	0	-
Cl-25(Supply connection and external flexible cords)	-	0	-
Cl-26(Terminals for external conductors)	-	0	-
Cl-27(Provision for earthing)	-	0	-
Cl-28(Screws and connections)	-	0	-
Cl-29(Clearances, creepage distances and solid insulation)	-	0	-
Cl-30(Resistance to heat and fire)	-	0	-
Cl-31(Resistance to rusting)	-	0	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	0	-
Cl-7(Marking and instructions)	-	0	-
Cl-8(Protection against access to live parts)	-	0	-
Cl-10(Power input and current)	-	0	-
Cl-11(Heating)	-	0	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	0	-
Cl-14(Transient overvoltages)	-	0	-
Cl-15(Moisture resistance)	-	0	-
Cl-16(Leakage current and electric strength)	-	0	-
Cl-17(Overload protection of transformers and associated circuits)	-	0	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	0	-
Cl-20(Stability and mechanical hazards)	-	0	-
Cl-21(Mechanical strength)	-	0	-
Cl-22(Construction)	-	0	-
Cl-23(Internal wiring)	-	0	-
Cl-24(Components)	-	0	-
Cl-25(Supply connection and external flexible cords)	-	0	-
Cl-26(Terminals for external conductors)	-	0	-
Cl-27(Provision for earthing)	-	0	-
Cl-28(Screws and connections)	-	0	-
Cl-29(Clearances, creepage distances and solid insulation)	-	0	-
Cl-30(Resistance to heat and fire)	-	0	-
Cl-31(Resistance to rusting)	-	0	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-

28 Aug, 2027

-
Included w.e.f.01.10.2025 Exclusion "Cl-32 (Radiation, toxicity and similar hazards) Cl-12 (Charging of metal-ion batteries) Cl-24 (Components)

1928

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 2 : Sec 59 (1999)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 59 insect killers

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-59 : 1999(Radiation Hazards)	-	5000	Additional Testing Charge For EMI/EMC:- 20,0000/-
Cl. 31 302-2-59 : 1999(Resistance to Rusting)	-	5000	-
Cl. 30 302-2-59 : 1999(Resistance to Heat Fire & Tracking )	-	5000	-
Cl. 29 302-2-59 : 1999(Clearances, Creepage Distances & Solid insulation )	-	5000	-
Cl. 28 302-2-59 : 1999(Screws & Connections)	-	5000	-
Cl. 27 302-2-59 : 1999(Provision for Earthing )	-	2500	-
Cl. 26 302-2-59 : 1999(Terminals for External conductors )	-	2500	-
Cl. 25 302-2-59 : 1999(Supply Connection & External Flexible Cords)	-	5000	-
Cl. 24 302-2-59 : 1999(Components)	-	5000	-
Cl. 23 302-2-59 : 1999(Internal Wiring)	-	5000	-
Cl. 22 302-2-59 : 1999(Construction )	-	5000	-
Cl. 21 302-2-59 : 1999(Mechanical strength)	-	2500	-
Cl. 20 302-2-59 : 1999(Stability & Mechanical Hazards)	-	2500	-
Cl. 19 302-2-59 : 1999(Abnormal Operation )	-	10000	-
Cl. 18 302-2-59 : 1999(Endurance)	-	500	-
Cl. 17 302-2-59 : 1999(Overload Protection of Transformers and Associated Circuit)	-	5000	-
Cl. 16 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2500	-
Cl. 15 302-2-59 : 1999(Moisture Resistance Test )	-	5000	-
Cl. 14 302-2-59 : 1999(Radio and television interference suppression / Transient over voltages)	-	2500	-
Cl. 13 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature)	-	2500	-
Cl. 11 302-2-59 : 1999(Temperature Rise)	-	5000	-
Cl. 10 302-2-59 : 1999(Power Input and Current )	-	5000	-
Cl. 9 302-2-59 : 1999(Starting of motor operated appliances)	-	2500	-
Cl. 8 302-2-59 : 1999(Protection Against Electric Shock )	-	5000	-
Cl. 7 302-2-59 : 1999(Marking)	-	500	-
(CI. 6 IS 302-2-59 : 1999(Classification )	-	500	-
Cl-9 (Cl-19.11.4.1 of IS 302-1)(Electrostatic discharge)	-	25000	-
Cl-9 (Cl-19.11.4.2 of IS 302-1)(Radiated Fields)	-	45000	-
Cl-9 (Cl-19.11.4.3 of IS 302-1)(Fast transient bursts)	-	25000	-
Cl-9 (Cl-19.11.4.4 of IS 302-1)(Surge Immunity test)	-	25000	-
Cl-9 (Cl-19.11.4.5 of IS 302-1)(Immunity to conducted discharge)	-	30000	-
Cl-9 (Cl-19.11.4.6 of IS 302-1)(Voltage dips and interruptions)	-	25000	-
Cl-9 (Cl-19.11.4.7 of IS 302-1)(Harmonics)	-	25000	-

26 Sep, 2027

-
Included w.e.f. 18.08.2025

1929

TUV SUD SOUTH ASIA PRIVATE LIMITED RANIPET

6191806

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

39900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	500	-
Cl. No.5("SIZE AND FITTINGS ")	-	500	-
Cl. No.6("CONSTRUCTION ")	-	500	-
Cl. No.7(MATERIAL)	-	500	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	600	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	600	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	600	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	600	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	600	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	1000	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	600	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	5200	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	600	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	600	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	2800	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	960	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1200	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	440	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	1200	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	440	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	440	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	800	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	400	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	400	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	960	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	400	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	5600	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1200	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2800	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	960	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	960	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	4000	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	400	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4000	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1600	-
Cl. No.8.6.2(Lead content)	-	1200	-
Cl-5 ((Amendment No-1)(Category And Type)	-	500	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	2450	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	2450	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	2450	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	2450	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	2450	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	2450	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	2450	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	4000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	4000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	4000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	4000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	4000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	2400	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	2400	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	2400	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	2400	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	2400	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	2400	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	2400	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	2400	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	2400	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	2400	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	2400	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	2400	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	2400	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	2400	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	2400	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	2800	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	2800	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	2800	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	2800	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	2800	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	2800	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	2800	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	2800	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	2800	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	2800	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	2800	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	2800	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	2800	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	2800	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	2800	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	2800	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	2800	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	2800	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	2800	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	2800	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	2800	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	2800	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	2800	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	2800	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	2800	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	2800	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	2800	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	2800	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	2400	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	5600	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	29000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	400	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1200	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	400	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1200	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	2400	-
Cl-10 (Amendment No-1)(Marking)	-	500	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	440	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	29000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1200	-

02 Dec, 2028

-
-

1930

Central institute of Petrochemicals Engineering & Technology (CIPET), Raipur

5163604

IS 8008 (2022)

Injection Moulded/Machined Polyethylene Fittings for Water Supply ï¿½ Specification ( Second Revision )

20 MM TO 315 MM

22869.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	700.00	For BIS test 22869/- and For Other 29825/- GST Extra
4.2(Material)	-	3300.00	MFI test 1100/- GST Extra
4.1(Material)	-	1400.00	Volatile content test 700/- & Water content test 700/- & GST Extra
4.2(Material)	-	2200.00	OIT test 2200/-& GST Extra
4.3(Rework Material)	-	2200.00	Overt all migration test 1700/- Specimen charge 500/- & GST Extra
5(COLOUR)	-	500.00	GST Extra
6.1(The nominal outside diameter)	-	500.00	GST Extra
6.2(Bends, tees, pipe ends and end caps designation)	-	500.00	GST Extra
7(WELD LENGTH)	-	500.00	GST Extra
8(VISUAL APPEARANCE)	-	500.00	GST Extra
9.1(DIMENSIONS OF FITTINGS)	-	500.00	GST Extra
9.2(DIMENSIONS OF FITTINGS)	-	0.00	-
9.3(DIMENSIONS OF FITTINGS)	-	500.00	GST Extra
10.1.1(Length of Pipe for Welding Test)	-	0.00	-
10.1.2(Sandwich Flange Hydraulic Testing)	-	0.00	-
10.2(Carbon Black Content and Dispersion)	-	1625.00	CBC test 925/- & CBD 700/-
10.3(Melt Flow Rate)	-	1100.00	GST Extra
10.4(Density)	-	700.00	GST Extra
10.5(Oxidation Induction Time)	-	2200.00	GST Extra
10.6(Overall Migration)	-	2200.00	specimen charge 500/- GST Extra
11.1(Type Tests)	-	5300.00	For 1656 hr .@ 80 o C ,Specimen charge 500/-
11.2(Acceptance Tests)	-	6100.00	For 100 hr @ 27 oC test 4000/- & 48 hr @ 80 oC test 1600/- specimen charge 500/- GST Extra

25 Apr, 2028

-
Included w.e.f.31.07.2025

1931

Sleen India Biz venture Private Limited, Agra

9139736

IS 10203 (1982)

Technical supply conditions for thin - Walled plain bearings

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Materials)	-	2500	-
4(Dimensions and Tolerances )	-	1000	-
5(Workmanship)	-	1500	-
6(Surface Finish )	-	3000	-
7(Chemical Composition )	-	2500	-
9(Packing )	-	3000	-
10(Marking)	-	500	-

15 May, 2027

-
Included w.e.f 01.08.2025

1932

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 915 (2012)

Laboratory glassware - One - Mark volumetric flasks (Third Revision)

ALL

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Material)	-	500	-
Table 1(Nominal Capacity)	-	0	-
Table 1(Internal Neck Diameter)	-	500	-
Table 1(Distance of graduation line)	-	500	-
Table 1(Overall Height)	-	500	-
Table 1(Bulb Diameter)	-	500	-
Table 1(Base Diameter)	-	500	-
Table 1(Wall Thickness)	-	500	-
Table 1(Ground joint k4)	-	500	-
Table 1(Ground joint k6)	-	500	-
8.3(Shape)	-	500	-
8.4(Neck)	-	500	-
8.5(Stopper)	-	500	-
8.6(Dimensions)	-	500	-
9.0(Graduation Line)	-	500	-
Table-2(Nominal capacity)	-	500	-
Table-2(Internal neck diameter)	-	500	-
Table-2(Distance of graduation line 1))	-	500	-
Table-2(Overall height 2))	-	500	-
Table-2(Bulb diameter)	-	500	-
Table-2(Base diameter)	-	500	-
Table-2(Wall thickness)	-	500	-
Table-2(Ground joint 3) k4)	-	500	-
Table-2(Ground joint 3) k6)	-	500	-
12.1(Visibility of graduation line, figures and marking)	-	500	-
12.2(Visibility of graduation line, figures and marking)	-	500	-
Clause. 7.0(Accuracy)	-	500	-

19 Jun, 2028

-
Included w.e.f 18.08.2025

1933

TUV SUD SOUTH ASIA PRIVATE LIMITED RANIPET

6191806

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

79900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(SAMPLING AND CONDITIONING)	-	500	-
5(DESIGN)	-	500	-
6(SIZE AND FITTINGS)	-	500	-
7.1.1(Whole Footwear)	-	79900	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	600	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	600	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	600	-
7.1.5(Energy Absorption at Seat Region)	-	800	-
7.1.6(Complete Shoe Flexing)	-	1600	-
7.1.7(Washability)	-	2000	-
7.1.8(Slip Resistance)	-	2800	-
7.1.9(Heel Drop)	-	600	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	1000	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	440	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	480	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	1000	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	1800	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	440	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	800	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	440	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	440	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	800	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	800	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	440	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	440	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	440	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	440	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	1000	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	1000	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	1800	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	4000	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	800	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	400	-
7.3 , Table No. 4 , i)(Tear strength,)	-	440	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	800	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	480	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	480	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	1000	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	1800	-
7.4 , Table No. 5 , ii)(Flexing index)	-	400	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	800	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	800	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	800	-
7.5 , Table No. 6 , i)(Thickness)	-	400	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	800	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	800	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	800	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	800	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	960	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	1200	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	5200	-
7.6 , Table No. 7 , iv)(Tear strength)	-	480	-
7.6 , Table No. 7 , v)(Tensile strength)	-	480	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	480	-
7.6 , Table No. 7 , vii)(Compression set)	-	800	-
7.7 , Table No. 8 , i)(Compression set)	-	800	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	440	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	800	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	440	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	1000	-
7.8 , Table No. 9 , ii)(Resilience)	-	1000	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	1000	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	1000	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	1000	-
7.8 , Table No. 9 , v)(Peel strength)	-	1000	-
7.9 , Table No. 10 , i)(Peel strength)	-	1000	-
7.9 , Table No. 10 , ii)(Shear strength)	-	600	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	1000	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	440	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	600	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	600	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	1200	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	480	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	600	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	800	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	5600	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	1050	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	2800	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	960	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	960	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	4000	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	400	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	4000	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1600	-
7.12.2 (Amendment 1)(Lead content)	-	1200	-
7.4 , Table No. 5 , i)(Thickness)	-	400	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	2800	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	4000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	4000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	4000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	4000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	4000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	2400	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	2400	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	2400	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	2400	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	2400	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	2400	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	2400	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	2400	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	2400	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	2400	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	2400	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	2400	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	2400	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	2400	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	2400	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	2400	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	2400	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	2400	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	2800	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	2800	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	2800	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	2800	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	2800	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	2800	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	2800	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	2800	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	2800	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	2800	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	2800	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	2800	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	2800	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	2800	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	2800	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	2800	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	2800	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	2800	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	2800	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	2800	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	2800	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	2800	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	2800	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	2800	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	2800	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	2800	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	2800	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	2800	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	5600	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	40000	-
8(MARKING AND PACKING)	-	500	-

02 Dec, 2028

-
-

1934

NATIONAL TESTING BUREAU, GHAZIABAD

8186826

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	500	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	1000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	0	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-

10 Jul, 2028

-
Included w.e.f.21.08.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7 EMI/EMC Cl.24 of IS 302-2-201: 2008 (Component)

1935

NATIONAL TESTING BUREAU, GHAZIABAD

8186826

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

All

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	500	-
Cl-7(Marking and instructions)	-	500	-
Cl-8(Protection against access to live parts)	-	500	-
Cl-10(Power input and current)	-	500	-
Cl-11(Heating)	-	500	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	1000	-
Cl-16(Leakage current and electric strength)	-	1000	-
Cl-17(Overload protection of transformers and associated circuits)	-	0	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	1000	-
Cl-20(Stability and mechanical hazards)	-	1000	-
Cl-21(Mechanical strength)	-	500	-
Cl-22(Construction)	-	500	-
Cl-23(Internal wiring)	-	500	-
Cl-24(Components)	-	0	-
Cl-25(Supply connection and external flexible cords)	-	1000	-
Cl-26(Terminals for external conductors)	-	500	-
Cl-27(Provision for earthing)	-	500	-
Cl-28(Screws and connections)	-	500	-
Cl-29(Clearances, creepage distances and solid insulation)	-	500	-
Cl-30(Resistance to heat and fire)	-	500	-
Cl-31(Resistance to rusting)	-	500	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	500	-
Cl-7(Marking and instructions)	-	500	-
Cl-8(Protection against access to live parts)	-	1000	-
Cl-10(Power input and current)	-	1000	-
Cl-11(Heating)	-	1000	-
Cl-12(Charging of metal-ion batteries)	-	1000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	1000	-
Cl-16(Leakage current and electric strength)	-	1000	-
Cl-17(Overload protection of transformers and associated circuits)	-	2000	-
Cl-18(Endurance)	-	1000	-
Cl-19(Abnormal operation)	-	1000	-
Cl-20(Stability and mechanical hazards)	-	1000	-
Cl-21(Mechanical strength)	-	1000	-
Cl-22(Construction)	-	1000	-
Cl-23(Internal wiring)	-	1000	-
Cl-24(Components)	-	1000	-
Cl-25(Supply connection and external flexible cords)	-	1000	-
Cl-26(Terminals for external conductors)	-	1000	-
Cl-27(Provision for earthing)	-	1000	-
Cl-28(Screws and connections)	-	1000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	1000	-
Cl-30(Resistance to heat and fire)	-	1000	-
Cl-31(Resistance to rusting)	-	1000	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	500	-
Cl-7(Marking and instructions)	-	1000	-
Cl-8(Protection against access to live parts)	-	1000	-
Cl-10(Power input and current)	-	1000	-
Cl-11(Heating)	-	1000	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	1000	-
Cl-16(Leakage current and electric strength)	-	1000	-
Cl-17(Overload protection of transformers and associated circuits)	-	1000	-
Cl-18(Endurance)	-	1000	-
Cl-19(Abnormal operation)	-	1000	-
Cl-20(Stability and mechanical hazards)	-	1000	-
Cl-21(Mechanical strength)	-	1000	-
Cl-22(Construction)	-	1000	-
Cl-23(Internal wiring)	-	1000	-
Cl-24(Components)	-	1000	-
Cl-25(Supply connection and external flexible cords)	-	1000	-
Cl-26(Terminals for external conductors)	-	1000	-
Cl-27(Provision for earthing)	-	1000	-
Cl-28(Screws and connections)	-	1000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	1000	-
Cl-30(Resistance to heat and fire)	-	1000	-
Cl-31(Resistance to rusting)	-	1000	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-

10 Jul, 2028

-
Included w.e.f.21.08.2025 Exclusion Cl-12 (Charging of metal-ion batteries) Cl-24 (Components) Cl-32 (Radiation, toxicity and similar hazards)

1936

Aaditech Test and Calibration Lab LLP

8179926

IS 14772 (2020)

Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations — General Requirements ( First Revision )

Electrical accessories with a rated voltage not exceeding 440 V a.c. intended for household or similar fixed electrical installations, either indoors or outdoors.

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Nature of material)	-	500	-
7.2(Type of installation)	-	500	-
7.3(Types of inlets)	-	500	-
7.4(Clamping means)	-	500	-
7.5(Minimum temperature during installation)	-	500	-
7.6, 7.7, 7.8(The degree of ingress protection)	-	1000	-
7.9(The provision for fixing accessories to the boxes )	-	500	-
7.1(The method of fixing the terminals)	-	500	-
8.1(marking)	-	500	-
8.2(By Inspection and The marking is rubbed by hand 15s width a piece of cloth soaked with water and again for 15s with a piece of cloth soaked with petroleum spirit.)	-	500	-
8.3(BIS Certification Marking)	-	500	-
9.0(Dimensions)	-	500	-
10.0(Protection against electric shock)	-	500	-
11.0(PROVISION FOR EARTHING)	-	500	-
12.0(Constructions)	-	2000	-
13.0(Resistance to ingress of solid objects)	-	2000	-
13.0(Resistance toharmful ingress of water)	-	2000	-
13.0(Resistance to ageing)	-	2000	-
14.0(insultation resistance)	-	500	-
14.0(electric strength)	-	500	-
15.0(Mechanical strength)	-	1000	-
16.0(resistance to heat)	-	1000	-
17.0(creepage distance)	-	500	-
17.0(clearances)	-	500	-
17.0(distance through seating compund)	-	500	-
18.0(Resistance to insulating material to abnormal heat and fire)	-	2000	-
19.0(Resistance to tracking)	-	1000	-
20.0(Resistance to corrosion)	-	2000	-
21.0(Electromagnetic compatibility (EMC))	-	0	-

28 Aug, 2027

-
Included w.e.f. 18.08.2025 Exclusion: 21.0 (Electromagnetic compatibility (EMC))

1937

Dashmesh Test Lab Private Limited

8186926

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

upto 5000W

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. 6 IS 4159:2021"(Classification)	-	100	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	1000	-
Cl.7.1 of IS 4159:2021(Marking)	-	1000	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.2 of IS 4159:2021(Marking)	-	0	-
Cl.7.3 of IS 4159:2021(Marking)	-	0	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	0	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	1000	-
"Cl. 11 IS 4159:2021"(Heating)	-	1000	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	1000	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	1000	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	1000	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	1000	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	1000	-
"Cl. 18 IS 4159:2021"(Endurance)	-	1000	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	1000	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	500	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	500	-
"Cl. 22 IS 4159:2021"(Construction)	-	500	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	500	-
"Cl. 24 IS 4159:2021"(Components)	-	500	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	500	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	500	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	500	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	500	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	1000	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	500	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	1000	-
Cl.22.103 of IS 4159:2021(Construction)	-	0	-
Cl.22.104 of IS 4159:2021(Construction)	-	0	-
Cl.22.106 of IS 4159:2021(Construction)	-	0	-
Cl.22.107 of IS 4159:2021(Construction)	-	0	-
Cl.22.108 of IS 4159:2021(Construction)	-	0	-
Cl.22.109 of IS 4159:2021(Construction)	-	0	-
Cl.22.110 of IS 4159:2021(Construction)	-	0	-
Cl.22.111 of IS 4159:2021(Construction)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	500	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	0	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	500	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	500	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	0	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	1000	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	1000	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	1000	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11.2 of IS 4159:2021(Heating)	-	0	-
Cl.11.101 of IS 4159:2021(Heating)	-	0	-
Cl.22.101 of IS 4159:2021(Construction)	-	0	-
Cl.22.102 of IS 4159:2021(Construction)	-	0	-
Cl.22.105 of IS 4159:2021(Construction)	-	0	-
Cl.18 of IS 4159:2021(Endurance Test)	-	1000	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.22.106(CONSTRUCTION)	-	0	-
"Cl. 6 IS 4159:2021"(Classification)	-	0	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.2 of IS 4159:2021(Marking)	-	0	-
Cl.7.3 of IS 4159:2021(Marking)	-	0	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	0	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	0	-
"Cl. 11 IS 4159:2021"(Heating)	-	0	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	0	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	0	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	0	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	0	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	0	-
"Cl. 18 IS 4159:2021"(Endurance)	-	0	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	0	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	0	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	0	-
"Cl. 22 IS 4159:2021"(Construction)	-	0	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	0	-
"Cl. 24 IS 4159:2021"(Components)	-	0	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	0	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	0	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	0	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	0	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	0	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	0	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	0	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	0	-
Cl.22.103 of IS 4159:2021(Construction)	-	0	-
Cl.22.104 of IS 4159:2021(Construction)	-	0	-
Cl.22.106 of IS 4159:2021(Construction)	-	0	-
Cl.22.107 of IS 4159:2021(Construction)	-	0	-
Cl.22.108 of IS 4159:2021(Construction)	-	0	-
Cl.22.109 of IS 4159:2021(Construction)	-	0	-
Cl.22.110 of IS 4159:2021(Construction)	-	0	-
Cl.22.111 of IS 4159:2021(Construction)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	0	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	0	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	0	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	0	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11.2 of IS 4159:2021(Heating)	-	0	-
Cl.11.101 of IS 4159:2021(Heating)	-	0	-
Cl.22.101 of IS 4159:2021(Construction)	-	0	-
Cl.22.102 of IS 4159:2021(Construction)	-	0	-
Cl.22.105 of IS 4159:2021(Construction)	-	0	-
Cl.18 of IS 4159:2021(Endurance Test)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.22.106(CONSTRUCTION)	-	0	-
"Cl. 6 IS 4159:2021"(Classification)	-	0	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.2 of IS 4159:2021(Marking)	-	0	-
Cl.7.3 of IS 4159:2021(Marking)	-	0	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	0	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	0	-
"Cl. 11 IS 4159:2021"(Heating)	-	0	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	0	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	0	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	0	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	0	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	0	-
"Cl. 18 IS 4159:2021"(Endurance)	-	0	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	0	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	0	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	0	-
"Cl. 22 IS 4159:2021"(Construction)	-	0	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	0	-
"Cl. 24 IS 4159:2021"(Components)	-	0	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	0	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	0	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	0	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	0	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	0	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	0	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	0	-
Cl.22.103 of IS 4159:2021(Construction)	-	0	-
Cl.22.104 of IS 4159:2021(Construction)	-	0	-
Cl.22.106 of IS 4159:2021(Construction)	-	0	-
Cl.22.107 of IS 4159:2021(Construction)	-	0	-
Cl.22.108 of IS 4159:2021(Construction)	-	0	-
Cl.22.109 of IS 4159:2021(Construction)	-	0	-
Cl.22.110 of IS 4159:2021(Construction)	-	0	-
Cl.22.111 of IS 4159:2021(Construction)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	0	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	0	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	0	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	0	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11.2 of IS 4159:2021(Heating)	-	0	-
Cl.11.101 of IS 4159:2021(Heating)	-	0	-
Cl.22.101 of IS 4159:2021(Construction)	-	0	-
Cl.22.102 of IS 4159:2021(Construction)	-	0	-
Cl.22.105 of IS 4159:2021(Construction)	-	0	-
Cl.18 of IS 4159:2021(Endurance Test)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.22.106(CONSTRUCTION)	-	0	-
"Cl. 6 IS 4159:2021"(Classification)	-	0	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.2 of IS 4159:2021(Marking)	-	0	-
Cl.7.3 of IS 4159:2021(Marking)	-	0	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	0	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	0	-
"Cl. 11 IS 4159:2021"(Heating)	-	0	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	0	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	0	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	0	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	0	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	0	-
"Cl. 18 IS 4159:2021"(Endurance)	-	0	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	0	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	0	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	0	-
"Cl. 22 IS 4159:2021"(Construction)	-	0	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	0	-
"Cl. 24 IS 4159:2021"(Components)	-	0	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	0	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	0	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	0	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	0	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	0	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	0	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	0	-
Cl.22.103 of IS 4159:2021(Construction)	-	0	-
Cl.22.104 of IS 4159:2021(Construction)	-	0	-
Cl.22.106 of IS 4159:2021(Construction)	-	0	-
Cl.22.107 of IS 4159:2021(Construction)	-	0	-
Cl.22.108 of IS 4159:2021(Construction)	-	0	-
Cl.22.109 of IS 4159:2021(Construction)	-	0	-
Cl.22.110 of IS 4159:2021(Construction)	-	0	-
Cl.22.111 of IS 4159:2021(Construction)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	0	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	0	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	0	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	0	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11.2 of IS 4159:2021(Heating)	-	0	-
Cl.11.101 of IS 4159:2021(Heating)	-	0	-
Cl.22.101 of IS 4159:2021(Construction)	-	0	-
Cl.22.102 of IS 4159:2021(Construction)	-	0	-
Cl.22.105 of IS 4159:2021(Construction)	-	0	-
Cl.18 of IS 4159:2021(Endurance Test)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.22.106(CONSTRUCTION)	-	0	-
"Cl. 6 IS 4159:2021"(Classification)	-	0	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.7.2 of IS 4159:2021(Marking)	-	0	-
Cl.7.3 of IS 4159:2021(Marking)	-	0	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	0	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	0	-
"Cl. 11 IS 4159:2021"(Heating)	-	0	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	0	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	0	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	0	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	0	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	0	-
"Cl. 18 IS 4159:2021"(Endurance)	-	0	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	0	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	0	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	0	-
"Cl. 22 IS 4159:2021"(Construction)	-	0	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	0	-
"Cl. 24 IS 4159:2021"(Components)	-	0	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	0	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	0	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	0	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	0	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	0	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	0	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	0	-
Cl.22.103 of IS 4159:2021(Construction)	-	0	-
Cl.22.104 of IS 4159:2021(Construction)	-	0	-
Cl.22.106 of IS 4159:2021(Construction)	-	0	-
Cl.22.107 of IS 4159:2021(Construction)	-	0	-
Cl.22.108 of IS 4159:2021(Construction)	-	0	-
Cl.22.109 of IS 4159:2021(Construction)	-	0	-
Cl.22.110 of IS 4159:2021(Construction)	-	0	-
Cl.22.111 of IS 4159:2021(Construction)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	0	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	0	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	0	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	0	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	0	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	0	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	0	-
Cl.11.2 of IS 4159:2021(Heating)	-	0	-
Cl.11.101 of IS 4159:2021(Heating)	-	0	-
Cl.22.101 of IS 4159:2021(Construction)	-	0	-
Cl.22.102 of IS 4159:2021(Construction)	-	0	-
Cl.22.105 of IS 4159:2021(Construction)	-	0	-
Cl.18 of IS 4159:2021(Endurance Test)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	0	-
Cl.22.106(CONSTRUCTION)	-	0	-

22 Jul, 2028

-
Included w.e.f. 01.09.2025 Exclusion: "19.11.4.7 (Harmonics) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.3 (Fast transient bursts) 19.11.4.2 (Radiated fields) 19.11.4.1 (Electrostatic discharges) ""Cl. 102 IS 4159:2021"" (Leakage and hydrostatic strength (for oil heating elements)) "

1938

Excel Surveyors Pvt. Ltd., Kolkata

5135906

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	0	-
5.2 Table 1(Dimensions)	-	400	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Ends per dm)	-	200	-
5.2 Table 1(Picks per dm)	-	200	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	500	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	700	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	0	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	700	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Drop impact strength)	-	800	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	600	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	0	-
4.6(Capacity)	-	200	-
4.3.1(Bottom Seam)	-	500	-
4.3(Sacks)	-	150	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	0	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	5000	-
4.2(Linear Density)	-	300	-
4.2(Width of tape)	-	200	-
Cl-4.4(Lamination Mass)	-	200	-
Cl-4.5(Liner- Thickness)	-	200	-
Cl-4.2 (Amendment No-2)(un-laminated fabric mass)	-	350	-
Cl-4.5(Liner- Width)	-	200	Please declare length of liner
Cl-4.5(Liner- Visible defects)	-	100	-

31 Dec, 2026

-
Included w.e.f.04.08.2025 Exclusion 5.1 (Mass of Bale)

1939

Testtex India Laboratories Private Limited, Noida

8138306

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

Protective Footwear (Third Revision)

39000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	200	-
Cl 5.2.2(" Height of upper ")	-	200	-
Cl 5.2.3(Heel area)	-	200	-
Cl 5.3.1.1(Construction of whole footwear)	-	200	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	700	-
Cl 5.3.2.1(Toe protection - general)	-	200	-
Cl 5.3.2.2(Internal length)	-	200	-
Cl 5.3.2.3(Width of toecap flange)	-	200	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	500	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	500	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	3000	-
Cl 5.3.2.6(Impact resistance)	-	1000	-
Cl 5.3.2.7(Compression resistance)	-	1000	-
Cl 5.3.3(Leak proofness)	-	500	-
Cl 5.3.4("Specific ergonomic features ")	-	500	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	2000	-
Cl 5.3.7(Seam strength)	-	500	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	200	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	200	-
Cl 5.4.2(Thickness)	-	200	-
Cl 5.4.3(Tear strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	500	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	500	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	500	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	3500	-
Cl 5.5.2(Lining- Tear strength)	-	500	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2(Tear strength of tongue)	-	500	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	200	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	500	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1(Thickness of Outsole)	-	200	-
Cl 5.8.2.2(Cleated area)	-	200	-
Cl 5.8.2.3(Cleat height)	-	200	-
Cl 5.8.3(Outsole- Tear strength)	-	500	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	3500	-
Cl 5.8.7(Interlayer bond strength)	-	500	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	200	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	200	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	500	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	500	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	3000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	3500	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	3500	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	200	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	2000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	200	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	4000	-
Cl 6.2.8.3(Resistance to cutting)	-	4000	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	2000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	500	-
Cl 6.4.3.2(Design of Ladder grip)	-	200	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	200	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	200	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	6000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	750	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	3000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	4000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	5000	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1000	-
Cl 7("Marking ")	-	0	-
Cl 7("Marking ")	-	0	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	0	repeated clause.
Cl 5.2(Design)	-	-	-
Cl 5.2.2(" Height of upper ")	-	-	-
Cl 5.2.3(Heel area)	-	-	-
Cl 5.3.1.1(Construction of whole footwear)	-	-	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	-	-
Cl 5.3.2.1(Toe protection - general)	-	-	-
Cl 5.3.2.2(Internal length)	-	-	-
Cl 5.3.2.3(Width of toecap flange)	-	-	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	-	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	-	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	-	-
Cl 5.3.2.6(Impact resistance)	-	-	-
Cl 5.3.2.7(Compression resistance)	-	-	-
Cl 5.3.3(Leak proofness)	-	-	-
Cl 5.3.4("Specific ergonomic features ")	-	-	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	-	-
Cl 5.3.7(Seam strength)	-	-	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.2(Thickness)	-	-	-
Cl 5.4.3(Tear strength)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	-	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	-	-
Cl 5.4.5(Flexing resistance)	-	-	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	-	-
Cl 5.4.7(Resistance to hydrolysis)	-	-	-
Cl 5.5.2(Lining- Tear strength)	-	-	-
Cl 5.5.3(Lining- Abrasion resistance)	-	-	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	-	-
Cl 5.6.2(Tear strength of tongue)	-	-	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	-	-
Cl 5.7.2(Water permeability of insock)	-	-	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	-	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	-	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	-	-
Cl 5.8.2.1(Thickness of Outsole)	-	-	-
Cl 5.8.2.2(Cleated area)	-	-	-
Cl 5.8.2.3(Cleat height)	-	-	-
Cl 5.8.3(Outsole- Tear strength)	-	-	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	-	-
Cl 5.8.5(Outsole-Flexing resistance)	-	-	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	-	-
Cl 5.8.7(Interlayer bond strength)	-	-	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	-	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	-	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	-	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	-	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	-	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	-	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	-	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	-	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	-	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	-	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	-	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	-	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	-	-
Cl 6.2.4(Energy absorption of seat region)	-	-	-
Cl 6.2.5(Water resistance)	-	-	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	-	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	-	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	-	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	-	-
Cl 6.2.8.3(Resistance to cutting)	-	-	-
Cl 6.2.9(Scuff cap)	-	-	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	-	-
Cl 6.3(Upper — Water penetration and absorption)	-	-	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	-	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	-	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	-	-
Cl 6.4.3.2(Design of Ladder grip)	-	-	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	-	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	-	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	-	-
Cl 5.3.8(Lead Content ( National Annex A))	-	-	-
Cl 7("Marking ")	-	-	-
Cl 7("Marking ")	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	-	-

31 Dec, 2026

-
Included w.e.f 11.09.2025 Exclusion: Cl 6.2.7 (Ankle protection)

1940

TUV SUD SOUTH ASIA PRIVATE LIMITED RANIPET

6191806

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

69900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	500	-
Clause 4.2 - 4.2.1(Construction)	-	500	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	500	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	500	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	600	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	800	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1600	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	2000	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	2800	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	960	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	5200	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	440	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	480	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	1000	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	1800	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	440	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	800	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	440	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	440	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	440	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	1000	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1000	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	1800	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	4000	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	400	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	440	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	800	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	440	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	440	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1000	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	1800	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	400	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	800	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	800	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	800	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	800	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	400	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	800	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	800	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	800	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	1200	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	5200	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	800	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	440	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	800	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	1000	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	1000	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	1000	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	1000	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	1000	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	2400	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	2400	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	1000	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	600	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	600	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	1200	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	480	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	600	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	800	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	5600	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2400	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	1200	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2800	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	960	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	960	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	4000	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	400	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4000	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1600	-
Clause 4.2 - 4.2.2(Construction)	-	500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	480	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	42000	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	1200	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	2800	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	2800	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	4000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	4000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	4000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	4000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	4000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	4000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	2800	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	2800	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	2800	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	2800	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	2800	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	2800	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	2800	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	2800	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	2800	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	2800	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	2800	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	2800	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	2800	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	2800	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	2800	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	2800	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	2800	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	2800	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	2800	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	2800	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	2800	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	2800	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	2800	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	2800	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	2800	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	2800	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	2800	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	2800	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	2800	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	2800	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	2800	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	2800	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	2800	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	2800	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	2800	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	2800	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	2800	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	2800	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	2800	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	2800	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	2800	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	2800	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	2800	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	2800	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	2800	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	2800	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	2800	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	2800	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	2800	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	2800	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	2800	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	5600	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	4000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	2400	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	2800	-
Cl No . 5(MARKING AND PACKING)	-	500	-

02 Dec, 2028

-
-

1941

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 878 (2008)

Laboratory glassware - Graduated measuring cylinders (Second Revision)

ALL

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Nominal capacity)	-	500	-
Table-1(Overall height)	-	500	-
Table-1(Distance from top of scale to top of cylinder)	-	500	-
Table-1(Internal height to highest graduation line)	-	500	-
Table-1(Sub-divisions)	-	500	-
Table-1(capacity at lowest graduation line)	-	500	-
Cl-9.1(Wall thickness)	-	500	-
Cl-9.2(Stability)	-	500	-
Cl-9.3(Base)	-	500	-
Cl-9.4(Rim and spout)	-	500	-
Cl-9.5(Neck and stopper)	-	500	-
Cl-9.6, Table-2(Nominal capacity)	-	500	-
Cl-9.6, Table-2(Overall height)	-	500	-
Cl-9.6, Table-2(Distance from top of scale to top of cylinder)	-	500	-
Cl-9.6, Table-2(Internal height to highest graduation line)	-	500	-
Cl-9.6, Table-2(Sub divisions)	-	500	-
Cl-9.6, Table-2(capacity at lowest graduation line)	-	500	-
Cl-10.1(Graduation)	-	500	-
Cl-10.2(Figuring)	-	500	-
Cl-11(Accuracy testing)	-	500	-
Cl-13(Visibility of graduation lines, figures and marking)	-	0	-
Clause. 8.0(Material)	-	0	-
Table- 1(Max. Permissible Error (Class- a))	-	0	-
Table- 1(Max. Permissible Error (Class- b))	-	0	-
Table- 2(Max. Permissible Error (Type-2))	-	0	-

19 Jun, 2028

-
Included w.e.f 18.08.2025

1942

Unique Test House

9134536

IS 11587 (1986)

Specification for structural weather resistant steels

WR-Fe- 480A, 480B, 500, Plates, Strips, Sections, Angle, Tees, Beams, Channels, Flats, All Size.

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4(Grades)	-	100	...
Cl 8(Tensile Test)	-	100	...
Cl 9(Bend Test)	-	200	...
Cl 10(Impact Test)	-	200	...
Cl 11(Flattening Test)	-	100	..
Cl 12(Freedom from Defects)	-	200	...
Cl 13(Dimensions)	-	200	..
Cl 16(Mass)	-	200	...
Cl 4(Grades)	-	200	...
Cl 8(Tensile Test)	-	200	...
Cl 9(Bend Test)	-	200	...
Cl 10(Impact Test)	-	200	...
Cl 11(Flattening Test)	-	200	...
Cl 12(Freedom from Defects)	-	200	..
Cl 13(Dimensions)	-	100	...
Cl 16(Mass)	-	200	...
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	100	...
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	100	...
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	100	..
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	100	..
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	100	....
Clause 5.1, Table -1(WR-Fe 480 A, Cr )	-	100	....
Clause 5.1, Table -1(WR-Fe 480 A, Ni)	-	200	..
Clause 5.1, Table -1(WR-Fe 480 A, Cu)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 B, C )	-	200	...
Clause 5.1, Table -1(WR-Fe 480 B, Si)	-	200	..
Clause 5.1, Table -1(WR-Fe 480 B, Mn)	-	100	...
Clause 5.1, Table -1(WR-Fe 480 B, P )	-	100	...
Clause 5.1, Table -1(WR-Fe 480 B, S )	-	100	....
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	100	....
Clause 5.1, Table -1(WR-Fe 480 B, Cu)	-	100	...
Clause 5.1, Table -1(WR-Fe 480 B, V)	-	100	....
Clause 5.1, Table -1(WR-Fe 500, C)	-	100	...
Clause 5.1, Table -1(WR-Fe 500, Si)	-	100	...
Clause 5.1, Table -1(WR-Fe 500, Mn)	-	100	....
Clause 5.1, Table -1(WR-Fe 500, P)	-	100	....
Clause 5.1, Table -1(WR-Fe 500, S)	-	100	....
Clause 5.1, Table -1(WR-Fe 500, Cr)	-	100	.....
Clause 5.1, Table -1(WR-Fe 500, V)	-	100	......
Cl. 13, 14(Out of Square)	-	200	....
Cl. 13, 14(Square Size)	-	200	...
Cl. 13, 14(Out of Round)	-	200	....
Cl. 13, 14(Diameter)	-	100	.....
Cl. 13, 14(Sweep)	-	200	...
Cl. 13, 14(Flateness of Web (Channel))	-	200	...
Cl. 13, 14(Flange out of square or Out of parallel (Channel))	-	200	.....
Cl. 13, 14(Width of flange (Channel))	-	200	...
Cl. 13, 14(Depth (Channel))	-	200	.....
Cl. 13, 14(Off Centre of Web)	-	200	.....
Cl. 13, 14(Flange out of square (I beam))	-	100	....
Cl. 13, 14(Width of flange (I Beam))	-	200	......
Cl. 13, 14(Depth (I Beam))	-	200	.....
Cl. 13, 14(Mass (Plate))	-	200	.....
Cl. 13, 14(Flange Slope)	-	200	.....
Cl. 13, 14(Web Thickness)	-	100	.....
Cl. 13, 14(Flange Thickness)	-	100	.....
Cl. 13, 14(Out of Square (Flat))	-	200	.....
Cl. 13, 14(Width )	-	100	....
Cl. 13, 14(Thickness )	-	200	....
Cl. 13, 14(Sectional Area )	-	200	.....
Cl. 13, 14(Camber )	-	200	.....
Cl. 13, 14(Weight)	-	100	...
Cl. 13, 14(Leg Length Difference (Angle))	-	200	....
Cl. 13, 14(Leg Length B (Angle))	-	200	.....
Cl. 13, 14(Leg Length A (Angle))	-	200	.....
Cl. 13, 14(Toe Radius R2)	-	200	....
Cl. 13, 14(Root Radius R1)	-	200	.....
Cl. 8, Table 2(Elongation)	-	200	.....
Cl. 8, Table 2(Yield Stress)	-	100	....
Cl 16(Mass)	-	200	.....
Cl 13(Dimensions)	-	200	..
Cl 12(Freedom from Defects)	-	200	....
Cl 11(Flattening Test)	-	200	...
Cl 10(Impact Test)	-	200	.....
Cl 9(Bend Test)	-	200	......
Cl 8(Tensile Test)	-	200	.....
Cl 4(Grades)	-	200	......
Cl 4(Grades)	-	200	...
Cl 8(Tensile Test)	-	200	....
Cl 9(Bend Test)	-	200	..
Cl 10(Impact Test)	-	200	....
Cl 11(Flattening Test)	-	100	.....
Cl 12(Freedom from Defects)	-	100	...
Cl 13(Dimensions)	-	100	....
Cl 16(Mass)	-	100	.....
Cl. 13, 14(Out of Square (Angle))	-	100	....
Cl 4(Grades)	-	200	....
Cl 8(Tensile Test)	-	200	......
Cl 9(Bend Test)	-	200	.......
Cl 10(Impact Test)	-	200	.....
Cl 11(Flattening Test)	-	200	.....
Cl 12(Freedom from Defects)	-	200	......
Cl 13(Dimensions)	-	200	.....
Cl 16(Mass)	-	200	.....
Cl 4(Grades)	-	200	....
Cl 8(Tensile Test)	-	200	....
Cl 9(Bend Test)	-	200	....
Cl 10(Impact Test)	-	200	.....
Cl 11(Flattening Test)	-	200	.....
Cl 12(Freedom from Defects)	-	200	...
Cl 13(Dimensions)	-	200	.....
Cl 16(Mass)	-	100	...
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, Cr )	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, Ni)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, Cu)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 B, C )	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, Si)	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 B, Mn)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 B, P )	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 B, S )	-	200	....
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 B, Cu)	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, V)	-	200	.....
Clause 5.1, Table -1(WR-Fe 500, C)	-	200	....
Clause 5.1, Table -1(WR-Fe 500, Si)	-	200	.....
Clause 5.1, Table -1(WR-Fe 500, Mn)	-	200	...
Clause 5.1, Table -1(WR-Fe 500, P)	-	200	....
Clause 5.1, Table -1(WR-Fe 500, S)	-	200	......
Clause 5.1, Table -1(WR-Fe 500, Cr)	-	200	....
Clause 5.1, Table -1(WR-Fe 500, V)	-	200	.....
Cl. 13, 14(Out of Square)	-	200	......
Cl. 13, 14(Square Size)	-	200	.....
Cl. 13, 14(Out of Round)	-	200	.....
Cl. 13, 14(Diameter)	-	200	......
Cl. 13, 14(Sweep)	-	200	....
Cl. 13, 14(Flateness of Web (Channel))	-	200	.....
Cl. 13, 14(Flange out of square or Out of parallel (Channel))	-	200	......
Cl. 13, 14(Width of flange (Channel))	-	200	.....
Cl. 13, 14(Depth (Channel))	-	100	......
Cl. 13, 14(Off Centre of Web)	-	200	......
Cl. 13, 14(Flange out of square (I beam))	-	200	.......
Cl. 13, 14(Width of flange (I Beam))	-	200	......
Cl. 13, 14(Depth (I Beam))	-	200	......
Cl. 13, 14(Mass (Plate))	-	200	......
Cl. 13, 14(Flange Slope)	-	200	......
Cl. 13, 14(Web Thickness)	-	200	......
Cl. 13, 14(Flange Thickness)	-	200	......
Cl. 13, 14(Out of Square (Flat))	-	100	....
Cl. 13, 14(Width )	-	200	.....
Cl. 13, 14(Thickness )	-	200	.....
Cl. 13, 14(Sectional Area )	-	200	.......
Cl. 13, 14(Camber )	-	200	......
Cl. 13, 14(Weight)	-	200	......
Cl. 13, 14(Leg Length Difference (Angle))	-	200	......
Cl. 13, 14(Leg Length B (Angle))	-	200	....
Cl. 13, 14(Leg Length A (Angle))	-	200	......
Cl. 13, 14(Toe Radius R2)	-	200	......
Cl. 13, 14(Root Radius R1)	-	100	......
Cl. 8, Table 2(Elongation)	-	200	.....
Cl. 8, Table 2(Yield Stress)	-	200	.....
Cl 16(Mass)	-	200	.....
Cl 13(Dimensions)	-	200	......
Cl 12(Freedom from Defects)	-	200	......
Cl 11(Flattening Test)	-	200	.....
Cl 10(Impact Test)	-	200	.....
Cl 9(Bend Test)	-	200	......
Cl 8(Tensile Test)	-	200	.....
Cl 4(Grades)	-	200	.....
Cl 4(Grades)	-	200	.....
Cl 8(Tensile Test)	-	200	....
Cl 9(Bend Test)	-	200	.....
Cl 10(Impact Test)	-	200	....
Cl 11(Flattening Test)	-	200	.....
Cl 12(Freedom from Defects)	-	200	.....
Cl 13(Dimensions)	-	200	.....
Cl 16(Mass)	-	200	.....
Cl. 13, 14(Out of Square (Angle))	-	200	......
Cl 4(Grades)	-	200	....
Cl 8(Tensile Test)	-	200	.....
Cl 9(Bend Test)	-	200	.....
Cl 10(Impact Test)	-	200	....
Cl 11(Flattening Test)	-	200	...
Cl 12(Freedom from Defects)	-	200	.....
Cl 13(Dimensions)	-	200	...
Cl 16(Mass)	-	200	...........
Cl 4(Grades)	-	200	.....
Cl 8(Tensile Test)	-	200	.....
Cl 9(Bend Test)	-	200	.....
Cl 10(Impact Test)	-	200	.....
Cl 11(Flattening Test)	-	200	....
Cl 12(Freedom from Defects)	-	200	.....
Cl 13(Dimensions)	-	200	....
Cl 16(Mass)	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	200	......
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	200	..........
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 A, Cr )	-	200	......
Clause 5.1, Table -1(WR-Fe 480 A, Ni)	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 A, Cu)	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, C )	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, Si)	-	200	........
Clause 5.1, Table -1(WR-Fe 480 B, Mn)	-	200	.........
Clause 5.1, Table -1(WR-Fe 480 B, P )	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 B, S )	-	200	..........
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	200	........
Clause 5.1, Table -1(WR-Fe 480 B, Cu)	-	200	..........
Clause 5.1, Table -1(WR-Fe 480 B, V)	-	200	........
Clause 5.1, Table -1(WR-Fe 500, C)	-	200	..........
Clause 5.1, Table -1(WR-Fe 500, Si)	-	200	........
Clause 5.1, Table -1(WR-Fe 500, Mn)	-	200	..........
Clause 5.1, Table -1(WR-Fe 500, P)	-	200	......
Clause 5.1, Table -1(WR-Fe 500, S)	-	200	.....
Clause 5.1, Table -1(WR-Fe 500, Cr)	-	200	.......
Clause 5.1, Table -1(WR-Fe 500, V)	-	200	.........
Cl. 13, 14(Out of Square)	-	200	.......
Cl. 13, 14(Square Size)	-	200	........
Cl. 13, 14(Out of Round)	-	200	.......
Cl. 13, 14(Diameter)	-	200	.........
Cl. 13, 14(Sweep)	-	200	.......
Cl. 13, 14(Flateness of Web (Channel))	-	200	........
Cl. 13, 14(Flange out of square or Out of parallel (Channel))	-	200	......
Cl. 13, 14(Width of flange (Channel))	-	200	.......
Cl. 13, 14(Depth (Channel))	-	200	.......
Cl. 13, 14(Off Centre of Web)	-	200	.......
Cl. 13, 14(Flange out of square (I beam))	-	200	........
Cl. 13, 14(Width of flange (I Beam))	-	200	........
Cl. 13, 14(Depth (I Beam))	-	200	........
Cl. 13, 14(Mass (Plate))	-	200	.........
Cl. 13, 14(Flange Slope)	-	200	.........
Cl. 13, 14(Web Thickness)	-	200	...........
Cl. 13, 14(Flange Thickness)	-	200	......
Cl. 13, 14(Out of Square (Flat))	-	200	.......
Cl. 13, 14(Width )	-	200	.......
Cl. 13, 14(Thickness )	-	200	.........
Cl. 13, 14(Sectional Area )	-	200	........
Cl. 13, 14(Camber )	-	200	........
Cl. 13, 14(Weight)	-	200	......
Cl. 13, 14(Leg Length Difference (Angle))	-	200	.........
Cl. 13, 14(Leg Length B (Angle))	-	200	......
Cl. 13, 14(Leg Length A (Angle))	-	200	..........
Cl. 13, 14(Toe Radius R2)	-	200	......
Cl. 13, 14(Root Radius R1)	-	200	.......
Cl. 8, Table 2(Elongation)	-	200	........
Cl. 8, Table 2(Yield Stress)	-	200	........
Cl 16(Mass)	-	200	.......
Cl 13(Dimensions)	-	200	.......
Cl 12(Freedom from Defects)	-	200	.......
Cl 11(Flattening Test)	-	200	.......
Cl 10(Impact Test)	-	200	.........
Cl 9(Bend Test)	-	200	........
Cl 8(Tensile Test)	-	200	.......
Cl 4(Grades)	-	200	.........
Cl 4(Grades)	-	200	.........
Cl 8(Tensile Test)	-	200	.........
Cl 9(Bend Test)	-	200	.........
Cl 10(Impact Test)	-	200	.......
Cl 11(Flattening Test)	-	200	.........
Cl 12(Freedom from Defects)	-	200	........
Cl 13(Dimensions)	-	200	........
Cl 16(Mass)	-	200	.........
Cl. 13, 14(Out of Square (Angle))	-	200	...........
Cl 4(Grades)	-	200	..........
Cl 8(Tensile Test)	-	200	..
Cl 9(Bend Test)	-	200	..
Cl 10(Impact Test)	-	200	...
Cl 11(Flattening Test)	-	200	...
Cl 12(Freedom from Defects)	-	200	...
Cl 13(Dimensions)	-	200	..
Cl 16(Mass)	-	200	..
Cl 4(Grades)	-	200	...
Cl 8(Tensile Test)	-	200	..
Cl 9(Bend Test)	-	200	..
Cl 10(Impact Test)	-	200	...
Cl 11(Flattening Test)	-	200	....
Cl 12(Freedom from Defects)	-	200	...
Cl 13(Dimensions)	-	200	...
Cl 16(Mass)	-	200	...
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	200	..
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	100	....
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	100	...
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 A, Cr )	-	200	...
Clause 5.1, Table -1(WR-Fe 480 A, Ni)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, Cu)	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 B, C )	-	200	....
Clause 5.1, Table -1(WR-Fe 480 B, Si)	-	200	...
Clause 5.1, Table -1(WR-Fe 480 B, Mn)	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 B, P )	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, S )	-	200	..
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	200	..
Clause 5.1, Table -1(WR-Fe 480 B, Cu)	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 B, V)	-	200	...
Clause 5.1, Table -1(WR-Fe 500, C)	-	200	..
Clause 5.1, Table -1(WR-Fe 500, Si)	-	200	...
Clause 5.1, Table -1(WR-Fe 500, Mn)	-	200	...
Clause 5.1, Table -1(WR-Fe 500, P)	-	200	....
Clause 5.1, Table -1(WR-Fe 500, S)	-	200	...
Clause 5.1, Table -1(WR-Fe 500, Cr)	-	200	.....
Clause 5.1, Table -1(WR-Fe 500, V)	-	200	......
Cl. 13, 14(Out of Square)	-	200	....
Cl. 13, 14(Square Size)	-	200	...
Cl. 13, 14(Out of Round)	-	200	.......
Cl. 13, 14(Diameter)	-	200	.....
Cl. 13, 14(Sweep)	-	200	........
Cl. 13, 14(Flateness of Web (Channel))	-	200	......
Cl. 13, 14(Flange out of square or Out of parallel (Channel))	-	200	.......
Cl. 13, 14(Width of flange (Channel))	-	200	........
Cl. 13, 14(Depth (Channel))	-	200	....
Cl. 13, 14(Off Centre of Web)	-	200	......
Cl. 13, 14(Flange out of square (I beam))	-	200	......
Cl. 13, 14(Width of flange (I Beam))	-	200	......
Cl. 13, 14(Depth (I Beam))	-	200	....
Cl. 13, 14(Mass (Plate))	-	200	.....
Cl. 13, 14(Flange Slope)	-	200	....
Cl. 13, 14(Web Thickness)	-	200	..
Cl. 13, 14(Flange Thickness)	-	200	.....
Cl. 13, 14(Out of Square (Flat))	-	200	......
Cl. 13, 14(Width )	-	200	.....
Cl. 13, 14(Thickness )	-	200	......
Cl. 13, 14(Sectional Area )	-	200	........
Cl. 13, 14(Camber )	-	200	......
Cl. 13, 14(Weight)	-	200	.......
Cl. 13, 14(Leg Length Difference (Angle))	-	200	....
Cl. 13, 14(Leg Length B (Angle))	-	200	........
Cl. 13, 14(Leg Length A (Angle))	-	200	........
Cl. 13, 14(Toe Radius R2)	-	200	....
Cl. 13, 14(Root Radius R1)	-	200	.....
Cl. 8, Table 2(Elongation)	-	200	....
Cl. 8, Table 2(Yield Stress)	-	200	...
Cl 16(Mass)	-	200	.....
Cl 13(Dimensions)	-	200	...
Cl 12(Freedom from Defects)	-	200	.......
Cl 11(Flattening Test)	-	200	.......
Cl 10(Impact Test)	-	200	...
Cl 9(Bend Test)	-	200	....
Cl 8(Tensile Test)	-	200	...
Cl 4(Grades)	-	200	......
Cl 4(Grades)	-	200	....
Cl 8(Tensile Test)	-	200	......
Cl 9(Bend Test)	-	200	...
Cl 10(Impact Test)	-	200	....
Cl 11(Flattening Test)	-	200	....
Cl 12(Freedom from Defects)	-	200	.....
Cl 13(Dimensions)	-	200	......
Cl 16(Mass)	-	200	.....
Cl. 13, 14(Out of Square (Angle))	-	200	.......
Cl 4(Grades)	-	200	.....
Cl 8(Tensile Test)	-	200	...
Cl 9(Bend Test)	-	200	...
Cl 10(Impact Test)	-	200	...
Cl 11(Flattening Test)	-	200	......
Cl 12(Freedom from Defects)	-	200	.......
Cl 13(Dimensions)	-	200	........
Cl 16(Mass)	-	200	......
Cl 4(Grades)	-	200	......
Cl 8(Tensile Test)	-	200	...
Cl 9(Bend Test)	-	200	........
Cl 10(Impact Test)	-	200	.........
Cl 11(Flattening Test)	-	200	.........
Cl 12(Freedom from Defects)	-	200	.
Cl 13(Dimensions)	-	200	........
Cl 16(Mass)	-	200	......
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	200	....
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	200	...
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	200	..
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	200	......
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	200	.....
Clause 5.1, Table -1(WR-Fe 480 A, Cr )	-	200	...........
Clause 5.1, Table -1(WR-Fe 480 A, Ni)	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 A, Cu)	-	200	.........
Clause 5.1, Table -1(WR-Fe 480 B, C )	-	200	.........
Clause 5.1, Table -1(WR-Fe 480 B, Si)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 B, Mn)	-	200	...........
Clause 5.1, Table -1(WR-Fe 480 B, P )	-	200	........
Clause 5.1, Table -1(WR-Fe 480 B, S )	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, Cu)	-	200	..........
Clause 5.1, Table -1(WR-Fe 480 B, V)	-	200	......
Clause 5.1, Table -1(WR-Fe 500, C)	-	200	.........
Clause 5.1, Table -1(WR-Fe 500, Si)	-	200	.
Clause 5.1, Table -1(WR-Fe 500, Mn)	-	200	............
Clause 5.1, Table -1(WR-Fe 500, P)	-	200	......
Clause 5.1, Table -1(WR-Fe 500, S)	-	200	..........
Clause 5.1, Table -1(WR-Fe 500, Cr)	-	200	..........
Clause 5.1, Table -1(WR-Fe 500, V)	-	200	............
Cl. 13, 14(Out of Square)	-	200	........
Cl. 13, 14(Square Size)	-	200	...........
Cl. 13, 14(Out of Round)	-	200	......
Cl. 13, 14(Diameter)	-	200	.....
Cl. 13, 14(Sweep)	-	200	........
Cl. 13, 14(Flateness of Web (Channel))	-	200	........
Cl. 13, 14(Flange out of square or Out of parallel (Channel))	-	200	........
Cl. 13, 14(Width of flange (Channel))	-	200	.......
Cl. 13, 14(Depth (Channel))	-	200	........
Cl. 13, 14(Off Centre of Web)	-	200	.........
Cl. 13, 14(Flange out of square (I beam))	-	200	...
Cl. 13, 14(Width of flange (I Beam))	-	200	....
Cl. 13, 14(Depth (I Beam))	-	200	.......
Cl. 13, 14(Mass (Plate))	-	200	...
Cl. 13, 14(Flange Slope)	-	200	.........
Cl. 13, 14(Web Thickness)	-	200	.......
Cl. 13, 14(Flange Thickness)	-	200	.......
Cl. 13, 14(Out of Square (Flat))	-	200	.........
Cl. 13, 14(Width )	-	200	.....
Cl. 13, 14(Thickness )	-	200	.......
Cl. 13, 14(Sectional Area )	-	200	....
Cl. 13, 14(Camber )	-	200	.........
Cl. 13, 14(Weight)	-	200	.....
Cl. 13, 14(Leg Length Difference (Angle))	-	200	...
Cl. 13, 14(Leg Length B (Angle))	-	200	...
Cl. 13, 14(Leg Length A (Angle))	-	200	..........
Cl. 13, 14(Toe Radius R2)	-	200	........
Cl. 13, 14(Root Radius R1)	-	200	.....
Cl. 8, Table 2(Elongation)	-	200	...
Cl. 8, Table 2(Yield Stress)	-	200	........
Cl 16(Mass)	-	200	....
Cl 13(Dimensions)	-	200	.......
Cl 12(Freedom from Defects)	-	200	.....
Cl 11(Flattening Test)	-	200	..........
Cl 10(Impact Test)	-	200	....
Cl 9(Bend Test)	-	200	.........
Cl 8(Tensile Test)	-	200	.......
Cl 4(Grades)	-	200	.....
Cl 4(Grades)	-	200	......
Cl 8(Tensile Test)	-	200	......
Cl 9(Bend Test)	-	200	.......
Cl 10(Impact Test)	-	200	........
Cl 11(Flattening Test)	-	200	.........
Cl 12(Freedom from Defects)	-	200	.....
Cl 13(Dimensions)	-	200	......
Cl 16(Mass)	-	200	.........
Cl. 13, 14(Out of Square (Angle))	-	200	.......
Cl 4(Grades)	-	200	.........
Cl 8(Tensile Test)	-	200	.........
Cl 9(Bend Test)	-	200	.......
Cl 10(Impact Test)	-	200	.........
Cl 11(Flattening Test)	-	200	.........
Cl 12(Freedom from Defects)	-	200	......
Cl 13(Dimensions)	-	200	........
Cl 16(Mass)	-	200	....
Cl 4(Grades)	-	200	.........
Cl 8(Tensile Test)	-	200	.......
Cl 9(Bend Test)	-	200	.........
Cl 10(Impact Test)	-	200	.
Cl 11(Flattening Test)	-	200	....
Cl 12(Freedom from Defects)	-	200	....
Cl 13(Dimensions)	-	200	.......
Cl 16(Mass)	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	200	..........
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	200	......
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	200	..........
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 A, Cr )	-	200	........
Clause 5.1, Table -1(WR-Fe 480 A, Ni)	-	200	........
Clause 5.1, Table -1(WR-Fe 480 A, Cu)	-	200	...
Clause 5.1, Table -1(WR-Fe 480 B, C )	-	200	.......
Clause 5.1, Table -1(WR-Fe 480 B, Si)	-	200	.........
Clause 5.1, Table -1(WR-Fe 480 B, Mn)	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, P )	-	200	...
Clause 5.1, Table -1(WR-Fe 480 B, S )	-	200	.
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	200	......
Clause 5.1, Table -1(WR-Fe 480 B, Cu)	-	200	....
Clause 5.1, Table -1(WR-Fe 480 B, V)	-	200	......
Clause 5.1, Table -1(WR-Fe 500, C)	-	200	.
Clause 5.1, Table -1(WR-Fe 500, Si)	-	200	.
Clause 5.1, Table -1(WR-Fe 500, Mn)	-	200	..
Clause 5.1, Table -1(WR-Fe 500, P)	-	200	....
Clause 5.1, Table -1(WR-Fe 500, S)	-	100	.....
Clause 5.1, Table -1(WR-Fe 500, Cr)	-	100	...
Clause 5.1, Table -1(WR-Fe 500, V)	-	100	......
Cl. 13, 14(Out of Square)	-	200	......
Cl. 13, 14(Square Size)	-	200	......
Cl. 13, 14(Out of Round)	-	200	.........
Cl. 13, 14(Diameter)	-	200	.......
Cl. 13, 14(Sweep)	-	200	......
Cl. 13, 14(Flateness of Web (Channel))	-	200	.....
Cl. 13, 14(Flange out of square or Out of parallel (Channel))	-	200	.......
Cl. 13, 14(Width of flange (Channel))	-	200	......
Cl. 13, 14(Depth (Channel))	-	200	..
Cl. 13, 14(Off Centre of Web)	-	200	...
Cl. 13, 14(Flange out of square (I beam))	-	200	...
Cl. 13, 14(Width of flange (I Beam))	-	200	..
Cl. 13, 14(Depth (I Beam))	-	200	........
Cl. 13, 14(Mass (Plate))	-	200	.....
Cl. 13, 14(Flange Slope)	-	200	......
Cl. 13, 14(Web Thickness)	-	200	......
Cl. 13, 14(Flange Thickness)	-	200	...
Cl. 13, 14(Out of Square (Flat))	-	200	..
Cl. 13, 14(Width )	-	200	....
Cl. 13, 14(Thickness )	-	200	......
Cl. 13, 14(Sectional Area )	-	200	..
Cl. 13, 14(Camber )	-	200	.....
Cl. 13, 14(Weight)	-	200	...
Cl. 13, 14(Leg Length Difference (Angle))	-	200	......
Cl. 13, 14(Leg Length B (Angle))	-	200	....
Cl. 13, 14(Leg Length A (Angle))	-	200	...
Cl. 13, 14(Toe Radius R2)	-	200	.
Cl. 13, 14(Root Radius R1)	-	200	......
Cl. 8, Table 2(Elongation)	-	200	........
Cl. 8, Table 2(Yield Stress)	-	200	......
Cl 16(Mass)	-	200	......
Cl 13(Dimensions)	-	200	.
Cl 12(Freedom from Defects)	-	200	..
Cl 11(Flattening Test)	-	200	...
Cl 10(Impact Test)	-	200	.......
Cl 9(Bend Test)	-	200	......
Cl 8(Tensile Test)	-	200	....
Cl 4(Grades)	-	200	.....
Cl 4(Grades)	-	200	.....
Cl 8(Tensile Test)	-	200	.....
Cl 9(Bend Test)	-	200	....
Cl 10(Impact Test)	-	200	......
Cl 11(Flattening Test)	-	200	....
Cl 12(Freedom from Defects)	-	200	..........
Cl 13(Dimensions)	-	200	.......
Cl 16(Mass)	-	200	......
Cl. 13, 14(Out of Square (Angle))	-	200	........
Cl 4(Grades)	-	200	.....
Cl 8(Tensile Test)	-	200	......
Cl 9(Bend Test)	-	100	......
Cl 10(Impact Test)	-	100	......
Cl 11(Flattening Test)	-	100	.....
Cl 12(Freedom from Defects)	-	100	.....
Cl 13(Dimensions)	-	100	......
Cl 16(Mass)	-	100	......
Cl 4(Grades)	-	100	........
Cl 8(Tensile Test)	-	100	.......
Cl 9(Bend Test)	-	100	.....
Cl 10(Impact Test)	-	100	......
Cl 11(Flattening Test)	-	100	......
Cl 12(Freedom from Defects)	-	100	......
Cl 13(Dimensions)	-	100	...
Cl 16(Mass)	-	100	......
Clause 5.1, Table -1(WR-Fe 480 A, C )	-	100	......
Clause 5.1, Table -1(WR-Fe 480 A, Si)	-	100	......
Clause 5.1, Table -1(WR-Fe 480 A, Mn)	-	100	.......
Clause 5.1, Table -1(WR-Fe 480 A, P )	-	100	......
Clause 5.1, Table -1(WR-Fe 480 A, S )	-	100	.......
Clause 5.1, Table -1(WR-Fe 480 A, Cr )	-	100	........
Clause 5.1, Table -1(WR-Fe 480 A, Ni)	-	100	...........
Clause 5.1, Table -1(WR-Fe 480 A, Cu)	-	100	......
Clause 5.1, Table -1(WR-Fe 480 B, C )	-	100	..........
Clause 5.1, Table -1(WR-Fe 480 B, Si)	-	100	......
Clause 5.1, Table -1(WR-Fe 480 B, Mn)	-	100	..........
Clause 5.1, Table -1(WR-Fe 480 B, P )	-	100	.......
Clause 5.1, Table -1(WR-Fe 480 B, S )	-	100	..........
Clause 5.1, Table -1(WR-Fe 480 B, Cr )	-	100	......
Clause 5.1, Table -1(WR-Fe 480 B, Cu)	-	100	.......
Clause 5.1, Table -1(WR-Fe 480 B, V)	-	100	........
Clause 5.1, Table -1(WR-Fe 500, C)	-	100	.......
Clause 5.1, Table -1(WR-Fe 500, Si)	-	100	.......
Clause 5.1, Table -1(WR-Fe 500, Mn)	-	100	........
Clause 5.1, Table -1(WR-Fe 500, P)	-	100	.......
Clause 5.1, Table -1(WR-Fe 500, S)	-	100	......
Clause 5.1, Table -1(WR-Fe 500, Cr)	-	100	........
Clause 5.1, Table -1(WR-Fe 500, V)	-	100	.........
Cl. 13, 14(Out of Square)	-	100	.......
Cl. 13, 14(Square Size)	-	100	........
Cl. 13, 14(Out of Round)	-	100	......
Cl. 13, 14(Diameter)	-	100	........
Cl. 13, 14(Sweep)	-	200	....
Cl. 13, 14(Flateness of Web (Channel))	-	200	.......
Cl. 13, 14(Flange out of square or Out of parallel (Channel))	-	200	.....
Cl. 13, 14(Width of flange (Channel))	-	200	......
Cl. 13, 14(Depth (Channel))	-	200	...........
Cl. 13, 14(Off Centre of Web)	-	200	......
Cl. 13, 14(Flange out of square (I beam))	-	200	......
Cl. 13, 14(Width of flange (I Beam))	-	100	.......
Cl. 13, 14(Depth (I Beam))	-	200	......
Cl. 13, 14(Mass (Plate))	-	200	.......
Cl. 13, 14(Flange Slope)	-	200	.......
Cl. 13, 14(Web Thickness)	-	200	.......
Cl. 13, 14(Flange Thickness)	-	200	.....
Cl. 13, 14(Out of Square (Flat))	-	200	......
Cl. 13, 14(Width )	-	200	........
Cl. 13, 14(Thickness )	-	200	.........
Cl. 13, 14(Sectional Area )	-	200	.......
Cl. 13, 14(Camber )	-	200	........
Cl. 13, 14(Weight)	-	200	.........
Cl. 13, 14(Leg Length Difference (Angle))	-	200	...........
Cl. 13, 14(Leg Length B (Angle))	-	200	......
Cl. 13, 14(Leg Length A (Angle))	-	200	......
Cl. 13, 14(Toe Radius R2)	-	200	......
Cl. 13, 14(Root Radius R1)	-	200	......
Cl. 8, Table 2(Elongation)	-	200	......
Cl. 8, Table 2(Yield Stress)	-	200	.....
Cl 16(Mass)	-	200	......
Cl 13(Dimensions)	-	200	.......
Cl 12(Freedom from Defects)	-	200	.......
Cl 11(Flattening Test)	-	200	......
Cl 10(Impact Test)	-	200	.....
Cl 9(Bend Test)	-	200	....
Cl 8(Tensile Test)	-	200	.........
Cl 4(Grades)	-	200	.......
Cl 4(Grades)	-	200	.......
Cl 8(Tensile Test)	-	200	.......
Cl 9(Bend Test)	-	200	........
Cl 10(Impact Test)	-	100	....
Cl 11(Flattening Test)	-	100	......
Cl 12(Freedom from Defects)	-	100	....
Cl 13(Dimensions)	-	100	........
Cl 16(Mass)	-	100	.....
Cl. 13, 14(Out of Square (Angle))	-	100	......

07 Sep, 2028

-
Included w.e.f. 15.10.2025

1943

TUV SUD SOUTH ASIA PRIVATE LIMITED RANIPET

6191806

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

4900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1(REQUIREMENTS-General)	-	500	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	500	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	500	-
5.5 (Amendment 1)(Thickness)	-	400	-
5.7 Table 2 i) (Amendment 1)(Relative Density)	-	400	-
5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A)	-	400	-
5.7, Table 2 iii) (Amendment 1)(Flexing resistance)	-	1200	-
5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N)	-	960	-
5.7, Table 2 v) (Amendment 1)(Tensile strength)	-	440	-
5.7, Table 2 vi) (Amendment 1)(Elongation at break)	-	440	-
5.7, Table 2 vii) (Amendment 1)(Tear strength (average force))	-	440	-
8.1(Test methods)	-	500	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	500	-
Cl.8.3(Measurement of thickness ")	-	400	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	4900	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	4900	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	400	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	400	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	400	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	500	-
5/5.1(REQUIREMENTS-General)	-	500	-
5/5.1(REQUIREMENTS-General)	-	500	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	500	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	4900	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	500	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	500	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	400	-
6(Marking and packing)	-	400	-
Cl.6.1,6.2,6.3(Marking and packing)	-	400	-
8.1(Test Methods)	-	500	-

02 Dec, 2028

-
-

1944

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 2 : Sec 42 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 42 Commercial electric forced convection ovens, steam cookers and steam-convection ovens

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	(If IS 302-1 is applicable additional testing charge for EMI/EMC:- 20,0000/-)
8(Protection against access to live parts)	-	2500	-
10(Power input and current)	-	5000	-
11(Heating)	-	5000	-
13.1 &13.2(Leakage current test)	-	2500	-
13.1 &13.3(Electric strength test)	-	2500	-
14(Transient overvoltages)	-	2500	-
15(Moisture resistance)	-	5000	-
15.3(Moisture resistance)	-	5000	-
15.101(Moisture resistance)	-	2500	-
16.1 &16.2(Leakage current test)	-	2500	-
16.1 & 16.3(Electric strength test)	-	2500	-
17(Overload protection of transformers and associated circuits)	-	5000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	10000	-
19.101(Abnormal operation)	-	2500	-
20.1(Stability and mechanical hazards)	-	2500	-
20.2(Stability and mechanical hazards)	-	2500	-
20.101(Stability and mechanical hazards)	-	2500	-
20.102(Stability and mechanical hazards)	-	2500	-
21(Mechanical strength)	-	3000	-
21.101(Mechanical strength)	-	500	-
22(Construction)	-	5000	-
22.101(Construction)	-	500	-
22.102(Construction)	-	500	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.106(Construction)	-	1000	-
22.107(Construction)	-	1000	-
22.108(Construction)	-	1000	-
22.109(Construction)	-	1000	-
22.109(Construction)	-	1000	-
22.110(Construction)	-	1000	-
22.111(Construction)	-	1000	-
22.112(Construction)	-	1000	-
22.113(Construction)	-	1000	-
22.114(Construction)	-	1000	-
22.115(Construction)	-	1000	-
22.116(Construction)	-	1000	-
22.117(Construction)	-	1000	-
22.118(Construction)	-	1000	-
22.119(Construction)	-	1000	-
23(Internal wiring)	-	2500	-
24(Components)	-	5000	-
25("Supply connection and external flexible cords")	-	5000	-
26("Terminals for external conductors")	-	5000	-
27(Provision for earthing)	-	2500	-
28(Screws and connections)	-	2500	-
29("Clearances, creepage distances and solid insulation")	-	5000	-
30(Resistance to heat and fire)	-	5000	-
30.101(Resistance to heat and fire)	-	2500	-
31(Resistance to rusting)	-	2500	-
32("Radiation, toxicity and similar hazards")	-	2500	-
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
15.101(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	0	-
19.101(Abnormal operation)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
20.101(Stability and mechanical hazards)	-	0	-
20.102(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
21.101(Mechanical strength)	-	0	-
22(Construction)	-	0	-
22.101(Construction)	-	0	-
22.102(Construction)	-	0	-
22.103(Construction)	-	0	-
22.104(Construction)	-	0	-
22.105(Construction)	-	0	-
22.106(Construction)	-	0	-
22.107(Construction)	-	0	-
22.108(Construction)	-	0	-
22.109(Construction)	-	0	-
22.109(Construction)	-	0	-
22.110(Construction)	-	0	-
22.111(Construction)	-	0	-
22.112(Construction)	-	0	-
22.113(Construction)	-	0	-
22.114(Construction)	-	0	-
22.115(Construction)	-	0	-
22.116(Construction)	-	0	-
22.117(Construction)	-	0	-
22.118(Construction)	-	0	-
22.119(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30(Resistance to heat and fire)	-	0	-
30.101(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32("Radiation, toxicity and similar hazards")	-	0	-

26 Sep, 2027

-
Included w.e.f. 18.08.2025 Exclusion: 32 ("Radiation, toxicity and similar hazards")

1945

Aaditech Test and Calibration Lab LLP

8179926

IS 2993 : Part 1 (2024)

a.c. Motor Capacitors Part 1 General - Performance, Testing and Rating - Safety Requirements - Guidance for Installation and Operation ( Third Revision )

This standard covers impregnated or unimpregnated capacitors having a dielectric of paper, plastic film, or a combination of both, either metallized or with metal-foil electrodes, with rated voltages up to and including 660 V. The minimum cross-sectional

400000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(General)	-	5000	-
5.5(Tangent of loss angle)	-	5000	-
5.7("Voltage test between terminals ")	-	5000	-
5.8(Voltage test between terminals and case)	-	5000	-
5.9(Capacitance measurement)	-	5000	-
5.9(Capacitance measurement)	-	0	-
5.1(Check of dimensions)	-	5000	-
5.11(Mechanical tests)	-	5000	-
5.12(Sealing test)	-	5000	-
5.13(Endurance test)	-	100000	-
5.14(Damp heat test)	-	120000	-
5.15(Self-healing test)	-	20000	-
5.16(Destruction test)	-	30000	-
5.17(Resistance to heat, fire and tracking)	-	20000	-
5.17.1(Ball-pressure test)	-	0	-
5.17.2(Glow-wire test)	-	0	-
5.17.3(Tracking test)	-	0	-
6.1(Maximum permissible voltage)	-	5000	-
6.2("Maximum permissible current ")	-	5000	-
6.3(Maximum permissible reactive output)	-	5000	-
7(Safety requirements)	-	5000	-
7.1(Requirements for Creepage distances and clearances)	-	500	-
7.2(Terminals and connecting cables)	-	5000	-
7.3(Earth connections)	-	5000	-
7.4(Discharge devices)	-	5000	-
8(Marking)	-	10000	-
9.2.1(Measurements of working voltage)	-	4000	-
9.2.2(Influence of capacitance)	-	4000	-
9.3(Checking capacitor temperature)	-	4000	-
9.4(Checking transients)	-	4000	-
9.5(Leakage current)	-	4000	-
5.1.1(General)	-	0	-
5.5(Tangent of loss angle)	-	0	-
5.7("Voltage test between terminals ")	-	0	-
5.8(Voltage test between terminals and case)	-	0	-
5.9(Capacitance measurement)	-	0	-
5.9(Capacitance measurement)	-	0	-
5.1(Check of dimensions)	-	0	-
5.11(Mechanical tests)	-	0	-
5.12(Sealing test)	-	0	-
5.13(Endurance test)	-	0	-
5.14(Damp heat test)	-	0	-
5.15(Self-healing test)	-	0	-
5.16(Destruction test)	-	0	-
5.17(Resistance to heat, fire and tracking)	-	0	-
5.17.1(Ball-pressure test)	-	0	-
5.17.2(Glow-wire test)	-	0	-
5.17.3(Tracking test)	-	0	-
6.1(Maximum permissible voltage)	-	0	-
6.2("Maximum permissible current ")	-	0	-
6.3(Maximum permissible reactive output)	-	0	-
7(Safety requirements)	-	0	-
7.1(Requirements for Creepage distances and clearances)	-	0	-
7.2(Terminals and connecting cables)	-	0	-
7.3(Earth connections)	-	0	-
7.4(Discharge devices)	-	0	-
8(Marking)	-	0	-
9.2.1(Measurements of working voltage)	-	0	-
9.2.2(Influence of capacitance)	-	0	-
9.3(Checking capacitor temperature)	-	0	-
9.4(Checking transients)	-	0	-
9.5(Leakage current)	-	0	-
5.1.1(General)	-	0	-
5.5(Tangent of loss angle)	-	0	-
5.7("Voltage test between terminals ")	-	0	-
5.8(Voltage test between terminals and case)	-	0	-
5.9(Capacitance measurement)	-	0	-
5.9(Capacitance measurement)	-	0	-
5.1(Check of dimensions)	-	0	-
5.11(Mechanical tests)	-	0	-
5.12(Sealing test)	-	0	-
5.13(Endurance test)	-	0	-
5.14(Damp heat test)	-	0	-
5.15(Self-healing test)	-	0	-
5.16(Destruction test)	-	0	-
5.17(Resistance to heat, fire and tracking)	-	0	-
5.17.1(Ball-pressure test)	-	0	-
5.17.2(Glow-wire test)	-	0	-
5.17.3(Tracking test)	-	0	-
6.1(Maximum permissible voltage)	-	0	-
6.2("Maximum permissible current ")	-	0	-
6.3(Maximum permissible reactive output)	-	0	-
7(Safety requirements)	-	0	-
7.1(Requirements for Creepage distances and clearances)	-	0	-
7.2(Terminals and connecting cables)	-	0	-
7.3(Earth connections)	-	0	-
7.4(Discharge devices)	-	0	-
8(Marking)	-	0	-
9.2.1(Measurements of working voltage)	-	0	-
9.2.2(Influence of capacitance)	-	0	-
9.3(Checking capacitor temperature)	-	0	-
9.4(Checking transients)	-	0	-
9.5(Leakage current)	-	0	-
5.1.1(General)	-	0	-
5.5(Tangent of loss angle)	-	0	-
5.7("Voltage test between terminals ")	-	0	-
5.8(Voltage test between terminals and case)	-	0	-
5.9(Capacitance measurement)	-	0	-
5.9(Capacitance measurement)	-	0	-
5.1(Check of dimensions)	-	0	-
5.11(Mechanical tests)	-	0	-
5.12(Sealing test)	-	0	-
5.13(Endurance test)	-	0	-
5.14(Damp heat test)	-	0	-
5.15(Self-healing test)	-	0	-
5.16(Destruction test)	-	0	-
5.17(Resistance to heat, fire and tracking)	-	0	-
5.17.1(Ball-pressure test)	-	0	-
5.17.2(Glow-wire test)	-	0	-
5.17.3(Tracking test)	-	0	-
6.1(Maximum permissible voltage)	-	0	-
6.2("Maximum permissible current ")	-	0	-
6.3(Maximum permissible reactive output)	-	0	-
7(Safety requirements)	-	0	-
7.1(Requirements for Creepage distances and clearances)	-	0	-
7.2(Terminals and connecting cables)	-	0	-
7.3(Earth connections)	-	0	-
7.4(Discharge devices)	-	0	-
8(Marking)	-	0	-
9.2.1(Measurements of working voltage)	-	0	-
9.2.2(Influence of capacitance)	-	0	-
9.3(Checking capacitor temperature)	-	0	-
9.4(Checking transients)	-	0	-
9.5(Leakage current)	-	0	-

28 Aug, 2027

-
Included w.e.f. 18.08.2025

1946

Dashmesh Test Lab Private Limited

8186926

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

15800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	50	-
Cl-5(General Conditions for the tests)	-	50	-
Cl-6(Classification)	-	100	-
Cl-7(Marking)	-	300	-
Cl-8(Safety Requirements)	-	10800	-
Cl-9(Endurance fpr motor and base assembly)	-	1000	-
Cl-10.5(Operational Tests for Juicers)	-	1000	-
Cl-11(Temperature Withstand Test for Bowl)	-	1000	-
Cl-12.1(Test for Switches)	-	500	-
Cl-13(Strength of Assembly)	-	500	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	0	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	0	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	0	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	0	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	0	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	0	-
Cl-10.4(Idli Batter)	-	0	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	0	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	0	-

22 Jul, 2028

-
Included w.e.f.11.08.2025 Exclusion Cl 19.11.4.1 TO Cl 19.11.4.8(EMI/EMC)

1947

NATIONAL TESTING BUREAU, GHAZIABAD

8186826

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. 6 IS 4159:2021"(Classification)	-	500	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	500	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	1000	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	1000	-
"Cl. 11 IS 4159:2021"(Heating)	-	500	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	500	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	2000	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	500	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	1000	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	0	-
"Cl. 18 IS 4159:2021"(Endurance)	-	0	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	500	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	500	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	500	-
"Cl. 22 IS 4159:2021"(Construction)	-	500	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	500	-
"Cl. 24 IS 4159:2021"(Components)	-	0	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	1000	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	500	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	500	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	500	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	1000	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	500	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	500	-
Cl.22.106(CONSTRUCTION)	-	500	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	500	-
Cl.7.1 of IS 4159:2021(Marking)	-	500	-
Cl.7.1 of IS 4159:2021(Marking)	-	500	-
Cl.7.1 of IS 4159:2021(Marking)	-	500	-
Cl.7.1 of IS 4159:2021(Marking)	-	500	-
Cl.7.1 of IS 4159:2021(Marking)	-	500	-
Cl.7.2 of IS 4159:2021(Marking)	-	500	-
Cl.7.3 of IS 4159:2021(Marking)	-	500	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	500	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	500	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	500	-
Cl.11.2 of IS 4159:2021(Heating)	-	500	-
Cl.11.101 of IS 4159:2021(Heating)	-	500	-
Cl.18 of IS 4159:2021(Endurance Test)	-	0	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	500	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	500	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	500	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	500	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	500	-
Cl.22.101 of IS 4159:2021(Construction)	-	500	-
Cl.22.102 of IS 4159:2021(Construction)	-	500	-
Cl.22.103 of IS 4159:2021(Construction)	-	500	-
Cl.22.104 of IS 4159:2021(Construction)	-	500	-
Cl.22.105 of IS 4159:2021(Construction)	-	500	-
Cl.22.106 of IS 4159:2021(Construction)	-	500	-
Cl.22.107 of IS 4159:2021(Construction)	-	500	-
Cl.22.108 of IS 4159:2021(Construction)	-	500	-
Cl.22.109 of IS 4159:2021(Construction)	-	500	-
Cl.22.110 of IS 4159:2021(Construction)	-	500	-
Cl.22.111 of IS 4159:2021(Construction)	-	500	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	500	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	500	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	500	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	500	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	500	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	500	-

10 Jul, 2028

-
Included w.e.f. 04.08.2025 Exclusion: "Cl. 24 IS 4159:2021"" (Components) 19.11.4.7 (Harmonics) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.4 (Surge immunity test) 19.11.4.3 (Fast transient bursts) 19.11.4.2 (Radiated fields) 19.11.4.1 (Electrostatic discharges) "

1948

National Test House (NR) - NTH, Ghaziabad

8101304

IS 5557 : Part 2 (2018)

All rubber gum boots and ankle boots: Part 2 occupational purposes

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(VISUAL)	-	100	-
3.2(specificgravity)	-	100	-
3.3(specificgravity)	-	100	-
3.4(specificgravity)	-	0	-
3.5(visual)	-	0	-
3.6(VISUAL)	-	0	-
3.7(VISUAL)	-	0	-
4(visual)	-	0	-
5(Design)	-	0	-
6(size & fitting)	-	0	-
7.1(visual)	-	0	-
7.1.1(Tear strength)	-	500	-
7.1.2(Abrasion resistance)	-	2000	-
7.2(all test of table 1)	-	2000	-
7.3(all test of table 2)	-	1000	-
7.3(sulphur test)	-	1000	-
7.4(Visual)	-	100	-
7.4.1(all test of table 3)	-	1000	-
7.5(Visual)	-	100	-
7.5.1(Tensile)	-	2000	-
7.5.2(Thickness)	-	500	-
7.5.3(Upper flexing)	-	2000	-
7.6(VISUAL)	-	500	-
7.6.1(Out sole thickness)	-	500	-
7.6.2(out sole tear strength)	-	1000	-
7.6.3(out sole abrasion)	-	1000	-
7.6.4(out sole flexing)	-	1000	-
7.6.5(Interlayer bond strength)	-	1000	-
7.7(INSOCK Visual)	-	100	-
7.7.1(Insock thickness)	-	500	-
7.7.2(Insock abrasion)	-	1000	-
8(CONSTRUCTION)	-	500	-
8.1(Hot contact)	-	1000	-
8.2(Leak proofness)	-	1000	-
8.3(Height of upper)	-	500	-
8.4(Adhesion test)	-	2000	-
8.5(Resistance to acid & alkaline)	-	1000	-
8.6(Resistance to fule oil)	-	1000	-
8.7.1(Antistatic)	-	1000	-
8.7.2(CONDUCTIVE FOOTWEAR)	-	500	-
8.7.3(Elecrically nsulating footwear)	-	1000	-
8.7.4(Resistance to cold)	-	500	-
10(Visual OBSERVATION)	-	100	-
11.1(Visual OBSERVATION)	-	100	-
11.2(Visual OBSERVATION)	-	100	-
11.3(Visual OBSERVATION)	-	100	-
9(IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
cl 9(IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
9(IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
9(IS - 17011,Table - 1(iv)(Chromium (VI))	-	500	-
9(IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	0	-
9(IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
9(IS - 17011,Table - 1(vii)(Formaldehyde)	-	0	-
9(IS - 17011,Table - 1(viii)(Organotin compounds)	-	0	-
9(IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
9(IS - 17011,Table - 1(x)(pH)	-	0	-
9(IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	0	-
9(IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	500	-
3.1(VISUAL)	-	0	-
3.2(specificgravity)	-	0	-
3.3(specificgravity)	-	0	-
3.4(specificgravity)	-	0	-
3.5(visual)	-	0	-
3.6(VISUAL)	-	0	-
3.7(VISUAL)	-	0	-
4(visual)	-	0	-
5(Design)	-	0	-
6(size & fitting)	-	0	-
7.1(visual)	-	0	-
7.1.1(Tear strength)	-	0	-
7.1.2(Abrasion resistance)	-	0	-
7.2(all test of table 1)	-	0	-
7.3(all test of table 2)	-	0	-
7.3(sulphur test)	-	0	-
7.4(Visual)	-	0	-
7.4.1(all test of table 3)	-	0	-
7.5(Visual)	-	0	-
7.5.1(Tensile)	-	0	-
7.5.2(Thickness)	-	0	-
7.5.3(Upper flexing)	-	0	-
7.6(VISUAL)	-	0	-
7.6.1(Out sole thickness)	-	0	-
7.6.2(out sole tear strength)	-	0	-
7.6.3(out sole abrasion)	-	0	-
7.6.4(out sole flexing)	-	0	-
7.6.5(Interlayer bond strength)	-	0	-
7.7(INSOCK Visual)	-	0	-
7.7.1(Insock thickness)	-	0	-
7.7.2(Insock abrasion)	-	0	-
8(CONSTRUCTION)	-	0	-
8.1(Hot contact)	-	0	-
8.2(Leak proofness)	-	0	-
8.3(Height of upper)	-	0	-
8.4(Adhesion test)	-	0	-
8.5(Resistance to acid & alkaline)	-	0	-
8.6(Resistance to fule oil)	-	0	-
8.7.1(Antistatic)	-	0	-
8.7.2(CONDUCTIVE FOOTWEAR)	-	0	-
8.7.3(Elecrically nsulating footwear)	-	0	-
8.7.4(Resistance to cold)	-	0	-
10(Visual OBSERVATION)	-	0	-
11.1(Visual OBSERVATION)	-	0	-
11.2(Visual OBSERVATION)	-	0	-
11.3(Visual OBSERVATION)	-	0	-
9(IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
cl 9(IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
9(IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
9(IS - 17011,Table - 1(iv)(Chromium (VI))	-	0	-
9(IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	0	-
9(IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
9(IS - 17011,Table - 1(vii)(Formaldehyde)	-	0	-
9(IS - 17011,Table - 1(viii)(Organotin compounds)	-	0	-
9(IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
9(IS - 17011,Table - 1(x)(pH)	-	0	-
9(IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	0	-
9(IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	0	-
3.1(VISUAL)	-	0	-
3.2(specificgravity)	-	0	-
3.3(specificgravity)	-	0	-
3.4(specificgravity)	-	0	-
3.5(visual)	-	0	-
3.6(VISUAL)	-	0	-
3.7(VISUAL)	-	0	-
4(visual)	-	0	-
5(Design)	-	0	-
6(size & fitting)	-	0	-
7.1(visual)	-	0	-
7.1.1(Tear strength)	-	0	-
7.1.2(Abrasion resistance)	-	0	-
7.2(all test of table 1)	-	0	-
7.3(all test of table 2)	-	0	-
7.3(sulphur test)	-	0	-
7.4(Visual)	-	0	-
7.4.1(all test of table 3)	-	0	-
7.5(Visual)	-	0	-
7.5.1(Tensile)	-	0	-
7.5.2(Thickness)	-	0	-
7.5.3(Upper flexing)	-	0	-
7.6(VISUAL)	-	0	-
7.6.1(Out sole thickness)	-	0	-
7.6.2(out sole tear strength)	-	0	-
7.6.3(out sole abrasion)	-	0	-
7.6.4(out sole flexing)	-	0	-
7.6.5(Interlayer bond strength)	-	0	-
7.7(INSOCK Visual)	-	0	-
7.7.1(Insock thickness)	-	0	-
7.7.2(Insock abrasion)	-	0	-
8(CONSTRUCTION)	-	0	-
8.1(Hot contact)	-	0	-
8.2(Leak proofness)	-	0	-
8.3(Height of upper)	-	0	-
8.4(Adhesion test)	-	0	-
8.5(Resistance to acid & alkaline)	-	0	-
8.6(Resistance to fule oil)	-	0	-
8.7.1(Antistatic)	-	0	-
8.7.2(CONDUCTIVE FOOTWEAR)	-	0	-
8.7.3(Elecrically nsulating footwear)	-	0	-
8.7.4(Resistance to cold)	-	0	-
10(Visual OBSERVATION)	-	0	-
11.1(Visual OBSERVATION)	-	0	-
11.2(Visual OBSERVATION)	-	0	-
11.3(Visual OBSERVATION)	-	0	-
9(IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
cl 9(IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
9(IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
9(IS - 17011,Table - 1(iv)(Chromium (VI))	-	0	-
9(IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	0	-
9(IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
9(IS - 17011,Table - 1(vii)(Formaldehyde)	-	0	-
9(IS - 17011,Table - 1(viii)(Organotin compounds)	-	0	-
9(IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
9(IS - 17011,Table - 1(x)(pH)	-	0	-
9(IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	0	-
9(IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	0	-
3.1(VISUAL)	-	0	-
3.2(specificgravity)	-	0	-
3.3(specificgravity)	-	0	-
3.4(specificgravity)	-	0	-
3.5(visual)	-	0	-
3.6(VISUAL)	-	0	-
3.7(VISUAL)	-	0	-
4(visual)	-	0	-
5(Design)	-	0	-
6(size & fitting)	-	0	-
7.1(visual)	-	0	-
7.1.1(Tear strength)	-	0	-
7.1.2(Abrasion resistance)	-	0	-
7.2(all test of table 1)	-	0	-
7.3(all test of table 2)	-	0	-
7.3(sulphur test)	-	0	-
7.4(Visual)	-	0	-
7.4.1(all test of table 3)	-	0	-
7.5(Visual)	-	0	-
7.5.1(Tensile)	-	0	-
7.5.2(Thickness)	-	0	-
7.5.3(Upper flexing)	-	0	-
7.6(VISUAL)	-	0	-
7.6.1(Out sole thickness)	-	0	-
7.6.2(out sole tear strength)	-	0	-
7.6.3(out sole abrasion)	-	0	-
7.6.4(out sole flexing)	-	0	-
7.6.5(Interlayer bond strength)	-	0	-
7.7(INSOCK Visual)	-	0	-
7.7.1(Insock thickness)	-	0	-
7.7.2(Insock abrasion)	-	0	-
8(CONSTRUCTION)	-	0	-
8.1(Hot contact)	-	0	-
8.2(Leak proofness)	-	0	-
8.3(Height of upper)	-	0	-
8.4(Adhesion test)	-	0	-
8.5(Resistance to acid & alkaline)	-	0	-
8.6(Resistance to fule oil)	-	0	-
8.7.1(Antistatic)	-	0	-
8.7.2(CONDUCTIVE FOOTWEAR)	-	0	-
8.7.3(Elecrically nsulating footwear)	-	0	-
8.7.4(Resistance to cold)	-	0	-
10(Visual OBSERVATION)	-	0	-
11.1(Visual OBSERVATION)	-	0	-
11.2(Visual OBSERVATION)	-	0	-
11.3(Visual OBSERVATION)	-	0	-
9(IS - 17011,Table - 1(iv)(Chromium (VI))	-	0	-
9(IS - 17011,Table - 1(x)(pH)	-	0	-
3.1(VISUAL)	-	0	-
3.2(specificgravity)	-	0	-
3.3(specificgravity)	-	0	-
3.4(specificgravity)	-	0	-
3.5(visual)	-	0	-
3.6(VISUAL)	-	0	-
3.7(VISUAL)	-	0	-
4(visual)	-	0	-
5(Design)	-	0	-
6(size & fitting)	-	0	-
7.1(visual)	-	0	-
7.1.1(Tear strength)	-	0	-
7.1.2(Abrasion resistance)	-	0	-
7.2(all test of table 1)	-	0	-
7.3(all test of table 2)	-	0	-
7.3(sulphur test)	-	0	-
7.4(Visual)	-	0	-
7.4.1(all test of table 3)	-	0	-
7.5(Visual)	-	0	-
7.5.1(Tensile)	-	0	-
7.5.2(Thickness)	-	0	-
7.5.3(Upper flexing)	-	0	-
7.6(VISUAL)	-	0	-
7.6.1(Out sole thickness)	-	0	-
7.6.2(out sole tear strength)	-	0	-
7.6.3(out sole abrasion)	-	0	-
7.6.4(out sole flexing)	-	0	-
7.6.5(Interlayer bond strength)	-	0	-
7.7(INSOCK Visual)	-	0	-
7.7.1(Insock thickness)	-	0	-
7.7.2(Insock abrasion)	-	0	-
8(CONSTRUCTION)	-	0	-
8.1(Hot contact)	-	0	-
8.2(Leak proofness)	-	0	-
8.3(Height of upper)	-	0	-
8.4(Adhesion test)	-	0	-
8.5(Resistance to acid & alkaline)	-	0	-
8.6(Resistance to fule oil)	-	0	-
8.7.1(Antistatic)	-	0	-
8.7.2(CONDUCTIVE FOOTWEAR)	-	0	-
8.7.3(Elecrically nsulating footwear)	-	0	-
8.7.4(Resistance to cold)	-	0	-
10(Visual OBSERVATION)	-	0	-
11.1(Visual OBSERVATION)	-	0	-
11.2(Visual OBSERVATION)	-	0	-
11.3(Visual OBSERVATION)	-	0	-
9(IS - 17011,Table - 1(iv)(Chromium (VI))	-	0	-
9(IS - 17011,Table - 1(x)(pH)	-	500	-

26 Oct, 2025

-
Included w.e.f.11.09.2025 Exclusion 9(IS - 17011,Table - 1(i) (Allergenic and carcinogenic disperse dyes) cl 9(IS - 17011,Table - 1(ii) (Aromatic amines released from Azo dyes (each individual amine)) 9(IS - 17011,Table - 1(iii) (Aromatic amines released from Azo dyes (each individual amine)) 9(IS - 17011,Table - 1(v) (Dimethyl fumarate (DMFU)) 9(IS - 17011,Table - 1(vi) (Formaldehyde (free or released by partial hydrolysis)) 9(IS - 17011,Table - 1(vii) (Formaldehyde) 9(IS - 17011,Table - 1(viii) (Organotin compounds) 9(IS - 17011,Table - 1(ix) (PCP-TeCP-TriCP polychlorophenols) 9(IS - 17011,Table - 1(xi) (Phthalates (each individual phthalate)) Phtha 9(IS - 17011,Table - 1(xii) (Nickel, on skin contact)

1949

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 7098 : Part 1 (2025)

Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification Part 1 For Working Voltages up to and Including 1 100 Volts (Second Revision)

COMPLETE

101750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Conductors -Material)	-	0	Rs.10000/- for Single core unarmoured cable; Rs.1000/- for each addl. Core; Rs.1200/- addl. For armoured cable; Rs.9000/- for addl. Tests for Cat-C1(FR); Rs.13000/- for addl. Tests for Cat-C2 (FR-LSH); Rs.1200/- for optional tests (cold bend / cold impact
Cl-5, Table-1 (i)(Tensile strength)	-	250	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	250	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	450	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	450	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	450	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	450	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	450	-
Cl-5, Table-1 (iv)(Shrinkage)	-	500	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	5500	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	1200	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	1500	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	1500	-
Cl-7(Armouring)	-	0	-
Cl-8(Outer Sheath)	-	0	-
Cl-11(Core Identification)	-	0	-
Cl-12(Laying up of Cores)	-	0	-
Cl-13(Inner Sheath (Common Covering))	-	0	-
Cl-14.1(Armouring- Application)	-	0	-
Cl-14.1.2(armour round wires/formed wires)	-	0	-
Cl-14.2(Type of Armour)	-	0	-
Cl-14.3(Dimensions)	-	200	-
Cl-14.4(Joints)	-	0	-
Cl-14.5(Resistance)	-	750	-
Cl-15.3(Thickness of Outer Sheath)	-	100	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	200	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	250	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	150	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	1200	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	350	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	350	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	350	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	450	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	500	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	350	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	250	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	250	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	1500	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	1500	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	450	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	1500	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	450	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	700	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	1200	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	750	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	750	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	1200	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	250	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	5500	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	750	-
Cl-17.2(High voltage test)	-	750	-
Cl-17.3(Flammability test)	-	1500	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	5500	-
Cl-17.5(Flame retardance test on single cable)	-	3500	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	12500	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	5500	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	5500	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	5500	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	5500	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	12500	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	2500	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	2500	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	2500	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	100	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	750	-
Cl-4(Conductors -Material)	-	0	-
Cl-5, Table-1 (i)(Tensile strength)	-	0	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	0	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	0	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	0	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	0	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	0	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	0	-
Cl-5, Table-1 (iv)(Shrinkage)	-	0	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	0	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	0	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	0	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	0	-
Cl-7(Armouring)	-	0	-
Cl-8(Outer Sheath)	-	0	-
Cl-11(Core Identification)	-	0	-
Cl-12(Laying up of Cores)	-	0	-
Cl-13(Inner Sheath (Common Covering))	-	0	-
Cl-14.1(Armouring- Application)	-	0	-
Cl-14.1.2(armour round wires/formed wires)	-	0	-
Cl-14.2(Type of Armour)	-	0	-
Cl-14.3(Dimensions)	-	0	-
Cl-14.4(Joints)	-	0	-
Cl-14.5(Resistance)	-	0	-
Cl-15.3(Thickness of Outer Sheath)	-	0	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	0	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	0	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	0	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	0	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	0	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	0	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	0	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	0	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	0	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	0	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	0	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	0	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	0	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	0	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	0	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	0	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	0	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	0	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	0	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	0	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	0	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	0	-
Cl-17.2(High voltage test)	-	0	-
Cl-17.3(Flammability test)	-	0	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	0	-
Cl-17.5(Flame retardance test on single cable)	-	0	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	0	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	0	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	0	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	0	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	0	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	0	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	0	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	0	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	0	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	0	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	0	-
Cl-4(Conductors -Material)	-	-	-
Cl-5, Table-1 (i)(Tensile strength)	-	-	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	-	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	-	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	-	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	-	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	-	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	-	-
Cl-5, Table-1 (iv)(Shrinkage)	-	-	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	-	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	-	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	-	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	-	-
Cl-7(Armouring)	-	-	-
Cl-8(Outer Sheath)	-	-	-
Cl-11(Core Identification)	-	-	-
Cl-12(Laying up of Cores)	-	-	-
Cl-13(Inner Sheath (Common Covering))	-	-	-
Cl-14.1(Armouring- Application)	-	-	-
Cl-14.1.2(armour round wires/formed wires)	-	-	-
Cl-14.2(Type of Armour)	-	-	-
Cl-14.3(Dimensions)	-	-	-
Cl-14.4(Joints)	-	-	-
Cl-14.5(Resistance)	-	-	-
Cl-15.3(Thickness of Outer Sheath)	-	-	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	-	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	-	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	-	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	-	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	-	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	-	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	-	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	-	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	-	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	-	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	-	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	-	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	-	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	-	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	-	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	-	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	-	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	-	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	-	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	-	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	-	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	-	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	-	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	-	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	-	-
Cl-17.2(High voltage test)	-	-	-
Cl-17.3(Flammability test)	-	-	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	-	-
Cl-17.5(Flame retardance test on single cable)	-	-	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	-	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	-	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	-	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	-	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	-	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	-	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	-	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	-	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	-	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	-	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	-	-

11 Apr, 2028

-
Included w.e.f.21.08.2025

1950

Sleen India Biz venture Private Limited, Agra

9139736

IS 5149 (2020)

Specification for Maleic Anhydride, Technical ( Second Revision )

7400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2.1(Description)	-	500	-
Cl.2.2, Table-1(i)(Crystallizing point)	-	1000	-
Cl.2.2, Table-1(ii)(Colour of the molten material)	-	1400	-
Cl.2.2, Table-1(iii)(Maleic acid content)	-	1000	-
Cl.2.2, Table-1(iv)(Maleic anhydride content)	-	1000	-
Cl.2.2, Table-1(v)(Ash)	-	500	-
Cl.2.2, Table-1(vi)(Iron content (as Fe))	-	2000	-

15 May, 2027

-
Included w.e.f 04.08.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number