| 181 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 733 (2025) |
Wrought Aluminium and Aluminium Alloy Bars, Rods, Sections, Extruded Tube, Hollow Sections and Profiles for General Engineering Purposes ? Specification (Fourth Revision) |
- |
12500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 6 Table 1 - Table 8(Zirconium +Titanium) |
- |
500 |
|
- |
| Cl-6.1, Table-1 to 8(Fe) |
- |
500 |
|
- |
| Cl-6.1, Table-1 to 8(Cu) |
- |
500 |
|
- |
| Cl-6.1, Table-1 to 8(Mn) |
- |
500 |
|
- |
| Cl-6.1, Table-1 to 8(Mg) |
- |
500 |
|
- |
| Cl-6.1, Table-1 to 8(Cr) |
- |
500 |
|
- |
| Cl-6.1, Table-1 to 8(Zn) |
- |
500 |
|
- |
| Cl-6.1, Table-1 to 8(Ti) |
- |
500 |
|
- |
| Cl-6.1, Table-1 to 8(V) |
- |
500 |
|
- |
| Cl-7.1, 7.2 & 7.3, Table-9(Dimensions) |
- |
1000 |
|
- |
| Cl-7.1, 7.2 & 7.3, Table-9(Rm MPa) |
- |
2000 |
|
- |
| Cl-7.1, 7.2 & 7.3, Table-9(Rp0.2 MPa) |
- |
2000 |
|
- |
| Cl-7.1, 7.2 & 7.3, Table-9(Elongation , Percent) |
- |
1000 |
|
- |
| Cl-9(Dimensions and Tolerances) |
- |
0 |
|
- |
| Cl-12(Packaging and Marking) |
- |
0 |
|
- |
| Cl-7.1(Tensile test) |
- |
0 |
|
- |
| Cl-5(Freedom from Defects) |
- |
1000 |
|
- |
| Cl-6.1, Table-1 to 8(Si) |
- |
500 |
|
- |
| Cl-4(General requirements) |
- |
0 |
|
- |
| Cl-6.1, Table-1 to 8(Aluminium) |
- |
500 |
|
- |
| Cl-6.2(chemical analysis) |
- |
0 |
|
- |
|
14 Jun, 2027 |
-
- |
| 182 |
National Test House (WR) - NTH, Mumbai
| 7107604
| IS 636 (2018) |
Non - Percolating flexible fire fighting delivery hose - Specification (Fourth Revision) |
- |
32000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 6.1.1(Inner lining shall be of rubber or rubberized fabric lining which is generally smooth and practically free
from pitting and other imperfections) |
- |
1000 |
|
Type 1: Rs. 25,000/- ,Type 2: Rs. 29000 /- ,Type 3: Rs. 32000/- |
| Cl 6.1.2(Externally applied elastomeric coating or
covering of the reinforcement, if present shall be
generally smooth and practically free from pitting and
other imperfections) |
- |
1000 |
|
- |
| Cl 6.1.3(The jacket shall be practically free from dirt, knots,
lumps, irregularities of the yarn and other visible defects.) |
- |
1000 |
|
- |
| Cl.6.2(The internal diameter of the hose shall be measured by
a suitable conical plug gauge and shall conform to the
specified diameter with a tolerance of plus 2 and minus
0.0 mm.) |
- |
1000 |
|
- |
| Cl.6.3(Unless specified otherwise, the standard length shall
be 30 m. Unless otherwise specified, a tolerance of ± 2
percent shall be permitted on the length prescribed for
the hose by the purchaser but the total of all lengths of
hose supplied shall be not less than the total quantity
specified by the purchaser.) |
- |
1000 |
|
- |
| Cl.6.4(The average mass of hose per meter of 2 m length,
without couplings attached, shall not be more than that
prescribed in Table 1. For the determination of mass,
sample of the hose shall be conditioned at 27 ± 2°C and
65 ± 5 percent relative humidity for a period of at least
48 h and then shall be weighed under the same conditions.) |
- |
1000 |
|
- |
| Cl.6.5(For 30 m length of dry hose without couplings, the coil
diameter shall not exceed 45 cm for Type 1, 50 cm for
Type 2 and 55 cm for Type 3.) |
- |
1000 |
|
- |
| Cl.6.6(Each hose length shall be subjected to an internal hydraulic pressure of 23 kgf/cm² in accordance with 8.1 of IS 443
(Part 3) increasing the pressure at the rate not exceeding
10 kgf/cm² per min and maintaining it for 1 min. Within
this 1 min, the hose shall neither develop any leakage or
sweating, nor shall any thread in the jacket break.) |
- |
5000 |
|
- |
| Cl.6.7(A test length of hose, 1 m clear of fittings when
subjected to an internal hydraulic pressure in
accordance with 8.3 of IS 443 (Part 3) while increasing
the pressure at the rate not exceeding 10 kgf/cm2 per
min shall not burst or show leakage before a pressure
of 38 kgf/cm2 is reached) |
- |
5000 |
|
- |
| Cl.6.8(There shall be no sign of leakage or rupture and no thread in the jacket shall break after retaining the internal hydraulic pressure of 23 kgf/cm2 for 30 seconds.) |
- |
1000 |
|
- |
| Cl.6.9(The increase in length shall not exceed 6 percent at an internal hydraulic pressure of 10 kgf/cm2 for 2 minutes.) |
- |
1000 |
|
- |
| Cl.6.10(The increase in diameter shall not be more than 10% at an internal hydraulic pressure of 10 kgf/cm2 for 2 minutes.) |
- |
1000 |
|
- |
| Cl 6.11 (Adhesion (Cl. 6.11.1))(Rate of separation shall not exceed 25 mm/min 1) Cover) |
- |
1000 |
|
- |
| Cl 6.11 (Adhesion (Cl. 6.11.1))(Rate of separation shall not exceed 25 mm/min 2) Jet) |
- |
1000 |
|
- |
| Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 1)(After ageing, there shall be no tackiness on the surface of lining or the surface of the cover. ) |
- |
1000 |
|
- |
| Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 2)(shall meet the requirements. given in Cl.6.7 (A test length of hose, 1 m clear of fittings when
subjected to an internal hydraulic pressure in
accordance with 8.3 of IS 443 (Part 3) while increasing
the pressure at the rate not exceeding 10 kgf/cm2 per
min shall not burst or show leakage before a pressure
of 38 kgf/cm2 is reached)) |
- |
1000 |
|
- |
| Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 3)(Rate of separation shall not exceed 25 mm/min 1) Cover) |
- |
1000 |
|
- |
| Cl.6.11 Acccleraled Ageing Test (Cl. 6.11.2) - 3)(Rate of separation shall not exceed 25 mm/min 2) Jet) |
- |
1000 |
|
- |
| Cl.6.12(When determined by the method described in Annex C,
the average number of cycles completed before bursting
of three test pieces, shall not be less than the value
specified in Table 2.) |
- |
1000 |
|
- |
| Cl.6.13(When tested in accordance with Annex D, the amount
of moisture absorbed shall not exceed 0.20 kg/m2 for
Type 2 hoses and 0.02 kg/m2 for Type 3 hoses.) |
- |
1000 |
|
- |
| Cl.6.14(When tested by the method described in Annex E, none
of the test samples shall burst at less than 8 s of the
application of the hot cube for Type 2 and 20 s for
Type 3 hose.) |
- |
2000 |
|
- |
| Cl.6.15 (1)(The length shall be laid horizontally and
the central fully immersed portion of the hose shall be
visually examined for any swelling of rubber,
weathering and cracking in the rubber lining) |
- |
1000 |
|
- |
| Cl.6.15 (2)(Rate of separation shall not exceed 25 mm/min 1) Cover) |
- |
1000 |
|
- |
| Cl.6.15 (2)(Rate of separation shall not exceed 25 mm/min 2) Jet) |
- |
1000 |
|
- |
| Cl.6.16(When tested by the method prescribed in
IS 443 (Part 1), the lining (for Types 1, 2 and 3) and
cover (for Type 3 only) of the hose shall neither develop
cracking nor crazing when seen under X2
magnification, except at the cut edges of the hose) |
- |
0 |
|
- |
| Cl.6.17(When tested in accordance with Annex F, at a test
temperature of, at a test temperature of 300 ± 10°C for
Types 1 and 2, and 400 ± 10° C for Type 3, in none of
the four tests shall the test piece show signs of leakage
within 120 s from the application of the filament rod or
on removal of this filament rod after the specified period) |
- |
0 |
|
- |
| Cl.6.18(When tested in accordance with Annex H, the pressure
loss per 23 m length shall not exceed the values specified
in Table 3 at the specified flow rate and inlet pressure
(Recommendations for pressure testing of hoses in
service are given at Annex G).) |
- |
0 |
|
- |
|
- |
-
- |
| 183 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 738 (1994) |
Wrought aluminium alloys, drawn tube for general engineering purposes - Specification (Third Revision) |
All Grade |
11500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.7, IS 2678(Wall Thickness at any point) |
- |
500 |
|
- |
| Cl.7, IS 2678(Mean Wall Thickness) |
- |
500 |
|
- |
| Cl. 9.1 Table 2(Tensile Strength- IS 2657) |
- |
2000 |
|
- |
| Cl. 9.1 Table 2(0.2 percent proof stress- IS 2657) |
- |
2000 |
|
- |
| Cl. 9.1 Table 2(Elongation on guage length of 50 mm) |
- |
1000 |
|
- |
| Cl. 6(Freedom from Defects- Cl.6) |
- |
1000 |
|
- |
| Cl. 8.1, Table 1(Aluminium- IS 504 : 1963
or 1S 11085 : 1984 or any other established
instrumental/chemical method. ) |
- |
500 |
|
- |
| Cl. 8.1, Table 1(Copper- IS 504 : 1963
or 1S 11085 : 1984 or any other established
instrumental/chemical method. ) |
- |
500 |
|
- |
| Cl. 8.1, Table 1(Magnesium- IS 504 : 1963
or 1S 11085 : 1984 or any other established
instrumental/chemical method. ) |
- |
500 |
|
- |
| Cl. 8.1, Table 1(Silicon- IS 504 : 1963
or 1S 11085 : 1984 or any other established
instrumental/chemical method. ) |
- |
500 |
|
- |
| Cl. 8.1, Table 1(Iron- IS 504 : 1963
or 1S 11085 : 1984 or any other established
instrumental/chemical method. ) |
- |
500 |
|
- |
| Cl. 8.1, Table 1(Manganese- IS 504 : 1963
or 1S 11085 : 1984 or any other established
instrumental/chemical method. ) |
- |
500 |
|
- |
| Cl. 8.1, Table 1(Zinc- IS 504 : 1963
or 1S 11085 : 1984 or any other established
instrumental/chemical method. ) |
- |
500 |
|
- |
| Cl. 8.1, Table 1(Titanium- IS 504 : 1963
or 1S 11085 : 1984 or any other established
instrumental/chemical method. ) |
- |
500 |
|
- |
| Cl. 8.1, Table 1(Chromium- IS 504 : 1963
or 1S 11085 : 1984 or any other established
instrumental/chemical method. ) |
- |
500 |
|
- |
|
14 Jun, 2027 |
-
- |
| 184 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 303 (2024) |
Plywood for General Purposes â Specification (Fourth Revision) |
- |
13000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2) |
- |
500 |
|
- |
| Cl-8.1(Dimensions -length) |
- |
1000 |
|
- |
| Cl-8.2(Thickness of the plywood boards) |
- |
500 |
|
- |
| Cl-8.3(Squareness) |
- |
1000 |
|
- |
| Cl-11.3.1, 11.3.1.1(Water Resistance Test) |
- |
2000 |
|
- |
| Cl-11.3.2(Mycological Test) |
- |
1500 |
|
- |
| Cl-11.4(Moisture Content) |
- |
1000 |
|
- |
| Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average) |
- |
2000 |
|
- |
| Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual) |
- |
2000 |
|
- |
| Cl-5.1(Classification by appearance) |
- |
500 |
|
- |
| Cl-5.2, Table- 1 (i)(Blister) |
- |
250 |
|
- |
| Cl-5.2, Table- 1 (ii)(Checks) |
- |
250 |
|
- |
| Cl-5.2, Table- 1 (iii)(Discolouration) |
- |
250 |
|
- |
| Cl-5.2, Table- 1 (iv)(Dote) |
- |
250 |
|
- |
| Cl-5.2, Table- 1 (v)(Insect hole) |
- |
250 |
|
- |
| Cl-5.2, Table- 1 (vi)(Joints) |
- |
250 |
|
- |
| Cl-5.2, Table- 1 (vii)(Knots (dead)) |
- |
250 |
|
- |
| Cl-5.2, Table- 1 (viii)(Pin knots (dead)) |
- |
250 |
|
- |
| Cl-5.2, Table- 1 (ix)(Pin knots (live)) |
- |
250 |
|
- |
| Cl-5.2, Table- 1 (x)(Knots (tight)) |
- |
250 |
|
- |
| Cl-5.2, Table- 1 (xi)(Patches) |
- |
250 |
|
- |
| Cl-5.2, Table- 1 (xii)(Splits) |
- |
250 |
|
- |
| Cl-5.2, Table- 1 (xiii)(Swirl) |
- |
250 |
|
- |
| Cl-7.2.1(Thickness of veneers) |
- |
500 |
|
- |
| Cl-7.2.3(Grain Direction) |
- |
500 |
|
- |
|
14 Jun, 2027 |
-
- |
| 185 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 13801 (2013) |
Chequered Cement Concrete Tiles - |
- |
7000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| (Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.) |
- |
500 |
|
- |
| Cl 12.1(Concavity & Convexity ) |
- |
500 |
|
- |
| Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.) |
- |
500 |
|
- |
| Cl 12.3(Shall not exceed 1 percent of the length of the edge.) |
- |
500 |
|
- |
| Cl 12.4(Water absorption) |
- |
1000 |
|
- |
| Cl 12.5(Wet transverse strength) |
- |
2000 |
|
- |
| Cl 12.6(Resistance to wear) |
- |
2500 |
|
- |
|
14 Jun, 2027 |
-
- |
| 186 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 1079 (2017) |
Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision) |
All Grade |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 13(Length, Width & Thickness) |
- |
1000 |
|
- |
| 8, Table 5 & 6(Tensile Strength) |
- |
1000 |
|
- |
| 8, Table 5 & 6(Yield Strength) |
- |
1000 |
|
- |
| 8, Table 5 & 6(Elongation) |
- |
1000 |
|
- |
| 9(Bend test) |
- |
1000 |
|
- |
| Clause 10(Cuppping Test) |
- |
2000 |
|
- |
| Cl 12(Workmanship) |
- |
1000 |
|
- |
| 6.1(Carbon %) |
- |
500 |
|
- |
| 6.1(Sulphur %) |
- |
500 |
|
- |
| 6.1(Phosphorus %) |
- |
500 |
|
- |
| 6.1(Manganese %) |
- |
500 |
|
- |
| 6.1(Silicon %) |
- |
500 |
|
- |
| 6.1(V) |
- |
500 |
|
- |
| 6.1( Ti) |
- |
500 |
|
- |
| 6.1( Nb) |
- |
500 |
|
- |
| 6.1( Nitrogen%) |
- |
500 |
|
- |
| 6.1( Aluminium %) |
- |
500 |
|
- |
| 6.1( Copper %) |
- |
500 |
|
- |
|
14 Jun, 2027 |
-
- |
| 187 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 1856 (2005) |
Steel wire ropes for haulage purposes - Specification (Third Revision) |
All Grade as per Specification |
8500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4- Tables 1 to 4(Diameter) |
- |
1000 |
|
- |
| 5- Tables 1 to 4(Breakiing Force of Rope with Steel Core) |
- |
3000 |
|
- |
| 6.3(Lay) |
- |
1000 |
|
- |
| 6.4- Tables 1 to 4(Mass of Rope with Steel core) |
- |
1500 |
|
- |
| 7(Uniformity of Znic coating - IS 1835 & IS 2366) |
- |
1000 |
|
- |
| 7(Mass of Znic Coating - IS 1835 & IS 6745) |
- |
2000 |
|
- |
| 5- Tables 1 to 4(Breakiing Force of Rope with Fiber Core) |
- |
3000 |
|
- |
| 6.4- Tables 1 to 4(Mass of Rope with Fiber core) |
- |
1500 |
|
- |
|
14 Jun, 2027 |
-
- |
| 188 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 10702 (1992) |
Rubber hawal chappal - Specification (Second Revision) |
- |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.4(Stud bolt) |
- |
1000 |
|
- |
| 5.4(Stud diameter) |
- |
1000 |
|
- |
| 5.4(Hardness (Shore A)) |
- |
1000 |
|
- |
| 5.4(Hardness (shore A)- after ageing) |
- |
1000 |
|
- |
| 5.4(Tear strength ) |
- |
1000 |
|
- |
| 5.4(Breaking strength ) |
- |
1000 |
|
- |
| 5.4(Elongation at break ) |
- |
1000 |
|
- |
| 5.4(Tensile Strength ) |
- |
1000 |
|
- |
| 5.4(Relative density ) |
- |
1000 |
|
- |
| 5.4(Shrinkage test (at 100 C temp)) |
- |
1000 |
|
- |
| 5.4(Shrinkage test (at room temp)) |
- |
1000 |
|
- |
| 5.4(Split tear strength ) |
- |
1000 |
|
- |
| 5.4(Compression set) |
- |
1000 |
|
- |
| 5.4(Hardness (Shore A)) |
- |
1000 |
|
- |
| 5.4(Relative density) |
- |
1000 |
|
- |
| 5.3(Thickness ) |
- |
1000 |
|
- |
| 5.1(Shape & Design) |
- |
1000 |
|
- |
|
14 Jun, 2027 |
-
- |
| 189 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 1029 (1970) |
Specification for hot-rolled steel strip (Baling) (First Revision) |
All Grades |
8000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.2(Width) |
- |
500 |
|
- |
| 8.2(Thickness) |
- |
500 |
|
- |
| 5.2(Tensile Strength, Mpa) |
- |
1000 |
|
- |
| 5.2(Tensile Test-1608:Part 1) |
- |
1000 |
|
Yield Strength / 0.2 % Proof Stress |
| 5.2(Elongation, %) |
- |
1000 |
|
- |
| 5.3(Bend Test-1599) |
- |
1000 |
|
- |
| Cl.4(Sulphur -IS 228 or method specified in relevant ISO standard) |
- |
500 |
|
- |
| Cl.4(Phosphorus -IS 228 or method specified in relevant ISO standard) |
- |
500 |
|
- |
|
14 Jun, 2027 |
-
- |
| 190 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 1489 (Part 1) (2015) |
Portland pozzolana cement - Specification: Part 1 fly Ash Based |
PPC (Fly Ash Based) |
11000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 -Table 2- i(Fineness 4031 Part 2) |
- |
1000 |
|
- |
| 7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3) |
- |
500 |
|
- |
| 7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3) |
- |
1000 |
|
- |
| 7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3) |
- |
0 |
|
- |
| 7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5) |
- |
250 |
|
- |
| 7 -Table 2-iii- b(Setting Time Final- 4031 Part 5) |
- |
250 |
|
- |
| 7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
1000 |
|
- |
| 7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
1000 |
|
- |
| 7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
1000 |
|
- |
| 7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10) |
- |
1000 |
|
- |
| 7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional)) |
- |
2000 |
|
- |
| 6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985) |
- |
1000 |
|
- |
|
14 Jun, 2027 |
-
- |
| 191 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 455 (2015) |
Portland slag cement - Specification |
- |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 Table 1 i(Fineness
IS 4031(Part 2)) |
- |
1000 |
|
- |
| Cl. 7 Table-2(Cl. 7 Table-2 ii a (Soundness , Le Chatelier Expansion )) |
- |
500 |
|
- |
| 7 Table 1 ii b(Soundness, Autoclave expansion
IS 4031(Part 3) ) |
- |
1000 |
|
- |
| 7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial
IS 4031(Part 5)) |
- |
250 |
|
- |
| 7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final
IS 4031(Part 5)) |
- |
250 |
|
- |
| 7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr
IS 4031(Part 6)) |
- |
1000 |
|
- |
| 7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr
IS 4031(Part 6)) |
- |
1000 |
|
- |
| Cl. 7 Table-2(Cl. 7 Table-2 ii b (Expansion after aeration )) |
- |
0 |
|
- |
| 7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr
IS 4031(Part 6)) |
- |
1000 |
|
- |
| 7 Table 1 v(Transverse strength (optional)
IS 4031(Part 8) ) |
- |
2000 |
|
- |
| 6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985) |
- |
1000 |
|
- |
|
14 Jun, 2027 |
-
- |
| 192 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 269 (2015) |
Ordinary portland cement - Specification (Sixth Revision) |
- |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 Table-3 i.(Fineness) |
- |
1000 |
|
- |
| 7 Table-3 ii a(Expansion by Le Chatelier) |
- |
500 |
|
- |
| 7 Table-3 ii b(Expansion by Autoclave) |
- |
1000 |
|
- |
| 7 Table-3 ii b(Expansion after aeration) |
- |
0 |
|
- |
| 7 Table-3 iii a(Setting Time Initial) |
- |
250 |
|
- |
| 7 Table-3 iii b(Setting Time Final) |
- |
250 |
|
- |
| 7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
1000 |
|
- |
| 7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
1000 |
|
- |
| 7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
1000 |
|
- |
| 6.1 Table-2 viii(Alkali content) |
- |
500 |
|
- |
| 6.1 Table-2 vii(Chloride content) |
- |
500 |
|
- |
| 6.1 Table-2 vi(Loss on ignition) |
- |
500 |
|
- |
| 6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride) |
- |
500 |
|
- |
| 6.1 Table-2 iv(Magnesia) |
- |
500 |
|
- |
| 6.1 Table-2 iii.(Insoluble residue) |
- |
500 |
|
- |
| 6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide) |
- |
500 |
|
- |
| 6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide) |
- |
500 |
|
- |
|
14 Jun, 2027 |
-
- |
| 193 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 15477 (2019) |
Adhesives for use with ceramic tiles and mosaics |
Type-1, 2, 3, 4, 5 |
23000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Classification) |
- |
1000 |
|
- |
| 5.1(Tensile Adhesion Strength ) |
- |
2500 |
|
Tensile Adhesion Strength- Dry Condition |
| 5.1(Tensile Adhesion Strength) |
- |
2500 |
|
Tensile Adhesion Strength- Wet Condition |
| 5.2(Shear Adhesion Strength ) |
- |
3000 |
|
Shear Adhesion Strength- Dry Condition |
| 5.2(Shear Adhesion Strength) |
- |
3000 |
|
Shear Adhesion Strength- Wet Condition |
| 5.2(Shear Adhesion Strength) |
- |
3000 |
|
Shear Adhesion Strength- Heat Ageing Condition |
| 5.3(OpenTime) |
- |
1000 |
|
Open time |
| 5.4(Adjustment Time) |
- |
1000 |
|
Adjustment Time |
| 5.5(Slip (Required for Vertical Application Only)) |
- |
3000 |
|
Slip |
| 5.6(Deformability (Required for VerticalApplication Only)) |
- |
3000 |
|
Deformability |
|
14 Jun, 2027 |
-
- |
| 194 |
National Test House (NWR) - NTH, Jaipur
| 8122904
| IS 398 : Part 4 (1994) |
Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision) |
- |
9000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1(Freedom from Defects) |
- |
500 |
|
- |
| 7.1 Table-1(Dimensional measurement of wires) |
- |
500 |
|
- |
| 7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor) |
- |
500 |
|
- |
| 8.1(Joints in wires-Conductors Containing Seven Wires) |
- |
500 |
|
- |
| 8.2(Joints in wires-Conductors Containing More Than Seven Wires) |
- |
500 |
|
- |
| 9.1(Stranding) |
- |
500 |
|
- |
| 9.2 Table 3(Lay Ratio of stranded conductors) |
- |
500 |
|
- |
| 9.3(Direction of Lay) |
- |
500 |
|
- |
| 9.4(Multiple layers of wires) |
- |
500 |
|
- |
| 11(Packing and Marking) |
- |
100 |
|
- |
| 12.2 Table 1(Breaking Load Test- Before Stranding) |
- |
4000 |
|
- |
| 12.2 Table 1(Breaking Load Test- After Stranding) |
- |
4000 |
|
- |
| 12.3 Table 1(Elongation Test- Before Stranding) |
- |
4000 |
|
- |
| 12.3 Table 1(Elongation Test- After Stranding) |
- |
4000 |
|
- |
| 12.4 Table 1(Resistance of Aluminium wire) |
- |
4000 |
|
- |
| 9.2(Lay Ratio 24 wire layer) |
- |
500 |
|
- |
| 9.2(Lay Ratio 18 wire layer) |
- |
500 |
|
- |
| 9.2(Lay Ratio 12 wire layer) |
- |
500 |
|
- |
| 9.2(Lay Ratio 3/6 wire layer) |
- |
500 |
|
- |
|
31 Dec, 2026 |
-
- |
| 195 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 14543 (2024) |
Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision |
- |
21000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5.3, Table-1 (i)(Colour, true colour units, Max) |
- |
150 |
|
- |
| Cl-5.3, Table-1 (ii)(Odour) |
- |
100 |
|
- |
| Cl-5.3, Table-1 (iii)(Taste) |
- |
100 |
|
- |
| Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max) |
- |
150 |
|
- |
| Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max) |
- |
150 |
|
- |
| Cl-5.3, Table-1 (vi)(pH) |
- |
150 |
|
- |
| Cl-5.3, Table-2 (i)(Barium (as Ba)) |
- |
275 |
|
- |
| Cl-5.3, Table-2 (ii)(Copper (as Cu)) |
- |
275 |
|
- |
| Cl-5.3, Table-2 (iii)(Iron (as Fe)) |
- |
275 |
|
- |
| Cl-5.3, Table-2 (iv)(Manganese (as Mn)) |
- |
275 |
|
- |
| Cl-5.3, Table-2 (v)(Nitrate (as NO3 )) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (vi)(Nitrite (as NO2 )) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (vii)(Fluoride (as F)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (viii)(Zinc (as Zn)) |
- |
275 |
|
- |
| Cl-5.3, Table-2 (ix)(Silver (as Ag)) |
- |
275 |
|
- |
| Cl-5.3, Table-2 (x)(Aluminium (as A1)) |
- |
275 |
|
- |
| Cl-5.3, Table-2 (xi)(Chloride (as Cl)) |
- |
150 |
|
- |
| Cl-5.3, Table-2 (xii)(Selenium (as Se)) |
- |
275 |
|
- |
| Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 )) |
- |
275 |
|
- |
| Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 )) |
- |
150 |
|
- |
| Cl-5.3, Table-2 (xv)(Calcium (as Ca)) |
- |
150 |
|
- |
| Cl-5.3, Table-2 (xvi)(Magnesium (as Mg)) |
- |
150 |
|
- |
| Cl-5.3, Table-2 (xvii)(Sodium (as Na)) |
- |
275 |
|
- |
| Cl-5.3, Table-2 (xviii)(Residual free chlorine) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xx)(Mineral oil) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xxi)(Anionic surface active agents) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xxii)(Sulphide) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xxiii)(Antimony (as Sb)) |
- |
275 |
|
- |
| Cl-5.3, Table-2 (xxiv)(Borates (as B)) |
- |
275 |
|
- |
| Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 )) |
- |
500 |
|
- |
| Cl-5.3, Table-3 (i)(Mercury (as Hg)) |
- |
300 |
|
- |
| Cl-5.3, Table-3 (ii)(Cadmium (as Cd)) |
- |
300 |
|
- |
| Cl-5.3, Table-3 (iii)(Arsenic (as As)) |
- |
300 |
|
- |
| Cl-5.3, Table-3 (iv)(Cyanide (as CN)) |
- |
500 |
|
- |
| Cl-5.3, Table-3 (v)(Lead (as Pb)) |
- |
300 |
|
- |
| Cl-5.3, Table-3 (vi)(Chromium (as Cr)) |
- |
300 |
|
- |
| Cl-5.3, Table-3 (vii)(Nickel (as Ni)) |
- |
300 |
|
- |
| Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB)) |
- |
500 |
|
- |
| Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons) |
- |
500 |
|
- |
| 5.4/Annex D/i(P,P-DDT) |
- |
150 |
|
- |
| 5.4/Annex D/ii(Lindane) |
- |
150 |
|
- |
| 5.4/Annex D/iv(b-Endosulfan) |
- |
150 |
|
- |
| 5.4/Annex D/xvi(Dieldrin) |
- |
150 |
|
- |
| 5.4/Annex D/xvi(Aldrin) |
- |
150 |
|
- |
| 5.4/Annex D/i(O,P-DDT) |
- |
150 |
|
- |
| 5.4/Annex D/iv(a-Endosulfan) |
- |
150 |
|
- |
| 5.4/Annex D/iii(d-HCH) |
- |
150 |
|
- |
| 5.4/Annex D/i(O,P-DDD) |
- |
150 |
|
- |
| 5.4/Annex D/i(P,P-DDE) |
- |
150 |
|
- |
| 5.4/Annex D/i(O,P-DDE) |
- |
150 |
|
- |
| 5.4/Annex D/iii(a-HCH) |
- |
150 |
|
- |
| 5.4/Annex D/iii(β- HCH) |
- |
150 |
|
- |
| 5.4/Annex D/iv(Endosulfan sulfate) |
- |
150 |
|
- |
| 5.4/Annex D/i(P,P-DDD) |
- |
150 |
|
- |
| 5.4/Annex D/xii(Alachlor) |
- |
150 |
|
- |
| 5.4/Annex D/vii(Chlorpyrifos) |
- |
150 |
|
- |
| 5.4/Annex D/x(Butachlor) |
- |
150 |
|
- |
| 5.4/Annex D/vi(Ethion) |
- |
150 |
|
- |
| 5.4/Annex D/xiv(Methyl parathion) |
- |
150 |
|
- |
| 5.4/Annex D/xv(Malathion) |
- |
150 |
|
- |
| 5.4/Annex D/viii(Phorate) |
- |
150 |
|
- |
| 5.4/Annex D/v(Monochrotophos) |
- |
150 |
|
- |
| 5.4/Annex D/xiii(Atrazine) |
- |
150 |
|
- |
| 5.4/Annex D/viii(Phorate sulphoxide) |
- |
150 |
|
- |
| 5.4/Annex D/viii(Phorate sulfone) |
- |
150 |
|
- |
| 5.4/Annex D/xxvii(Methyl paraoxon) |
- |
150 |
|
- |
| 5.4/Annex D/xxviii(Malaoxon) |
- |
150 |
|
- |
| 5.4/Annex D/xi(Isoproturon) |
- |
150 |
|
- |
| 5.4/Annex D/ix(2,4 –D) |
- |
150 |
|
- |
| Cl-5.2.1(Escherichia coli or thermotolerant bacteria) |
- |
400 |
|
- |
| Cl-5.2.2(Coliform) |
- |
400 |
|
- |
| Cl-5.2.3(Staphylococcus aureus) |
- |
400 |
|
- |
| Cl-5.2.4(Sulphite Reducing Anaerobes) |
- |
400 |
|
- |
| Cl-5.2.5(Pseudomonas Aeruginosa) |
- |
400 |
|
- |
| 5.2.6(Aerobic Microbial Count @ 20 to 22 deg C) |
- |
0 |
|
- |
| Cl-5.2.7(Yeast and mould) |
- |
400 |
|
- |
| Cl-5.2.8(Salmonella) |
- |
400 |
|
- |
| Cl-5.2.9(Vibrio cholera) |
- |
400 |
|
- |
| Cl-5.4 (i)(Pesticide residues considered individually) |
- |
250 |
|
- |
| Cl-5.4 (ii)(Total pesticide residue) |
- |
250 |
|
- |
| 5.3(Appearance) |
- |
100 |
|
- |
| Cl-5.2.3(Faecal streptococci) |
- |
400 |
|
- |
| Cl-5.2.8(shigella) |
- |
400 |
|
- |
| Cl-5.2.9(V.parahaemolyticus) |
- |
400 |
|
- |
| Cl-5.1(General Requirements) |
- |
200 |
|
- |
| Cl-5.2.6(Aerobic Microbial Count @ 37 deg C) |
- |
400 |
|
- |
|
14 Jun, 2027 |
-
- |
| 196 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 3319 (1995) |
Blades, surgical, detachable (Bard Parker Type) and handles - Specification (Fourth Revision) |
- |
14900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5,5.1 & 5.2; Table 1(Shape and dimensions) |
- |
1000 |
|
- |
| 6,6.1(Workmanship and Finish) |
- |
1000 |
|
- |
| 6,6.2(Workmanship and Finish) |
- |
0 |
|
- |
| 6,6.3(Workmanship and Finish) |
- |
0 |
|
- |
| 6,6.4(Workmanship and Finish) |
- |
0 |
|
- |
| 7.1(Hardness test) |
- |
2000 |
|
- |
| 9.1( Visual Examination) |
- |
1000 |
|
- |
| 9.2( Performance Test) |
- |
2000 |
|
- |
| 10.1.1( Marking on Blade) |
- |
100 |
|
- |
| 10.1.2(Packages of Non-sterile Blades) |
- |
100 |
|
- |
| 10.1.3,10.1.3.1(Packages of sterile Blades,Unit containers for sterile Blades) |
- |
100 |
|
- |
| 10.1.3,10.1.3.2(Packages of sterile Blades , Outer containers for sterile blade) |
- |
0 |
|
- |
| 10.2( Handles) |
- |
0 |
|
- |
| 10.2.2( Packages of Handles) |
- |
100 |
|
- |
| 11,11.1,11.1.1( Packages of Non-sterile Blades ; Unit container) |
- |
0 |
|
- |
| 11,11.1,11.1.2( Packages of Non-sterile Blades ; Outer container) |
- |
0 |
|
- |
| 11.2,11.2.1(Packages of Sterile Blades) |
- |
0 |
|
- |
| 11.2,11.2.2( Packages of Sterile Blades ; Unit container) |
- |
0 |
|
- |
| 11.2,11.2.3( Packages of sterile Blades ; Outer container) |
- |
0 |
|
- |
| 11.4(Packaging of Handles) |
- |
0 |
|
- |
| Clause -4, 4.1(TITANIUM) |
- |
500 |
|
- |
| Clause -4, 4.1(VANADIUM) |
- |
500 |
|
- |
| Clause -4, 4.1(Molybdenum) |
- |
500 |
|
- |
| Clause -4, 4.1(Chromium) |
- |
500 |
|
- |
| Clause -4, 4.1(Nickel) |
- |
500 |
|
- |
| Clause -4, 4.1( ALUMINIUM) |
- |
500 |
|
- |
| Clause -4, 4.1(SILICON) |
- |
500 |
|
- |
| Clause -4, 4.1(MANGANESE) |
- |
500 |
|
- |
| Clause -4, 4.1(PHOSPHURS) |
- |
500 |
|
- |
| Clause -4, 4.1(SULPHUR) |
- |
500 |
|
- |
| Clause -4, 4.1( CARBON) |
- |
500 |
|
- |
|
14 Jun, 2027 |
-
- |
| 197 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 16102 : Part 1 (2012) |
Self - Ballasted led lamps for general lighting services: Part 1 safety requirements |
- |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Marking) |
- |
1200 |
|
- |
| 6(Interchangeability) |
- |
1200 |
|
- |
| 7(Protection against accidental contact with live parts) |
- |
1200 |
|
- |
| 8(Insulation Resistance and Electric Strength) |
- |
5000 |
|
- |
| 9(MECHANICAL STRENGTH) |
- |
1200 |
|
- |
| 10(cap temperature) |
- |
2000 |
|
- |
| 11(Resistance to Heat) |
- |
2000 |
|
- |
| 12(Resistance to Flame and Ignition) |
- |
5000 |
|
- |
| 13(Fault conditions) |
- |
2000 |
|
- |
| 14(Creepage distance and clearances) |
- |
1200 |
|
- |
| 4(General requirement and General test requirements) |
- |
0 |
|
- |
| 8(Strength after humidity treatment) |
- |
5000 |
|
- |
| 5(Marking) |
- |
1200 |
|
- |
| 6(Interchangeability) |
- |
1200 |
|
- |
| 7(Protection against accidental contact with live parts) |
- |
1200 |
|
- |
| 9(Mechanical strength) |
- |
1200 |
|
- |
| 10(Cap temperature rise) |
- |
2000 |
|
- |
| 11(Resistance to heat) |
- |
2000 |
|
- |
| 12(Resistance to flame and ignition) |
- |
5000 |
|
- |
| 13(Fault conditions) |
- |
2000 |
|
- |
| 14(Creepage distances and clearances) |
- |
1200 |
|
- |
| 15(Selection of lamps for tests (Sampling)) |
- |
0 |
|
- |
| 16(Condition of compliance) |
- |
0 |
|
- |
| 17(Tests) |
- |
0 |
|
- |
| Annex A(Ovreview of systems composed of LED modules and control gear) |
- |
0 |
|
- |
| Annex B(Lamps with operating position limitations) |
- |
0 |
|
- |
| 4(GENERAL REQUIREMENT AND GENERAL TEST REQUIREMENTS) |
- |
0 |
|
- |
|
14 Jun, 2027 |
-
- |
| 198 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 10322 : Part 5 : Sec 1 (2012) |
Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision) |
- |
40000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(General Test Requireements) |
- |
0 |
|
- |
| 5(Classification of Luminaires') |
- |
0 |
|
- |
| 6.0(Marking) |
- |
1200 |
|
- |
| 7.0(Construction) |
- |
1200 |
|
- |
| 8.0(Creepage Distance and Clearances) |
- |
1200 |
|
- |
| 9.0(Provision for earthing) |
- |
1200 |
|
- |
| 10.0(Terminals) |
- |
1200 |
|
- |
| 11.0(External & Internal Wiring) |
- |
1200 |
|
- |
| 12.0(Protection against electric shock) |
- |
1200 |
|
- |
| 13.0(Endurance Tests and Thermal Tests) |
- |
5500 |
|
- |
| 14.0(Resistance to Dust & Moisture) |
- |
12000 |
|
- |
| 15.0(Insulation Resistance and Electric Strength) |
- |
5000 |
|
- |
| 16.0(Resistance to Heat , fire and tracking) |
- |
12000 |
|
- |
| 17.0(Photometric Test) |
- |
10000 |
|
- |
| (Cl.4.24) (Annex-P)(UV Radiations for metal halide lamps) |
- |
0 |
|
- |
| 4.26.2(Short Circuit Protection) |
- |
0 |
|
- |
|
14 Jun, 2027 |
-
- |
| 199 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 16103 : Part 1 (2012) |
Led modules for general lighting: Part 1 safety requirements |
- |
25000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Marking) |
- |
500 |
|
NA |
| 8(Terminals) |
- |
500 |
|
NA |
| 9(PROVISION FOR EARTHING) |
- |
1000 |
|
NA |
| 10(Protection against accidental contact with live parts) |
- |
500 |
|
NA |
| 11(Mositure Resistance and Insulation) |
- |
3500 |
|
NA |
| 12(Electric Strength) |
- |
1500 |
|
NA |
| 13(Fault conditions) |
- |
1500 |
|
NA |
| 15(Construction) |
- |
500 |
|
NA |
| 16(Creepage distance and clearances) |
- |
500 |
|
NA |
| 17(Screws, current carrying parts and connections) |
- |
1000 |
|
NA |
| 18(Resistance to heat, fire and tracking) |
- |
12000 |
|
NA |
| 19(Resistance to corrosion) |
- |
2000 |
|
NA |
|
14 Jun, 2027 |
-
- |
| 200 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 16103 : Part 2 (2012) |
Led modules for general lighting: Part 2 performance requirements |
- |
60000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6(Dimensions) |
- |
500 |
|
NA |
| 7(Module Power) |
- |
2000 |
|
NA |
| 8(Light Output) |
- |
5000 |
|
NA |
| 9(Chromaticity
Coordinates,
Correlated colour
temperature and
colour rendering) |
- |
5000 |
|
NA |
| 10(LED Module Life) |
- |
45000 |
|
NA |
| 12(Information for
Luminaire design) |
- |
500 |
|
NA |
|
14 Jun, 2027 |
-
- |
| 201 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 16104 (2012) |
D.C. or A.C. supplied electronic control gear for led modules - Performance requirements |
- |
30000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Classification) |
- |
500 |
|
NA |
| 6(Marking) |
- |
500 |
|
NA |
| 7.2(Output voltage and
Current) |
- |
1000 |
|
NA |
| 7.3(Capacitive Load
Requirement) |
- |
500 |
|
NA |
| 7.4(Voltage surge during
switching and operation) |
- |
1500 |
|
NA |
| 8(Total Circuit
Power) |
- |
2000 |
|
NA |
| 9(Circuit Power
Factor) |
- |
1000 |
|
NA |
| 10(Supply Current) |
- |
1000 |
|
NA |
| 12(Operational test
for abnormal conditions) |
- |
2000 |
|
NA |
| 13(Endurance) |
- |
20000 |
|
NA |
|
14 Jun, 2027 |
-
- |
| 202 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 10322 : Part 5 : Sec 4 (1987) |
Specification for luminaires: Part 5 particular requirements: Sec 4 portable general purpose luminaires |
- |
40000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Marking) |
- |
500 |
|
Individual test charge 1200/- per sample for this tests. |
| 6(Construction) |
- |
1000 |
|
Individual test charge 1200/- per sample for this tests. |
| 7(Creepage Distance
And Clearances) |
- |
1000 |
|
Individual test charge 1200/- per sample for this tests. |
| 8(Provision for
Earthing) |
- |
1000 |
|
Individual test charge 1200/- per sample for this tests. |
| 9(Terminals) |
- |
1000 |
|
Individual test charge 1200/- per sample for this tests. |
| 10(External &
Internal Wiring) |
- |
500 |
|
Individual test charge 1200/- per sample for this tests. |
| 11(Protection Against
Electric Shock ) |
- |
1000 |
|
Individual test charge 1200/- per sample for this tests. |
| 13.3(Mechanical
Strength Test ) |
- |
1000 |
|
Individual test charge 1200/- per sample for this tests. |
| 13.4(Endurance Test
and Thermal test) |
- |
5000 |
|
Individual test charge 5500/- per sample for this tests. |
| 13.5(Resistance To
Dust & Moisture) |
- |
7500 |
|
Individual test charge 12000/- per sample for this tests. |
| 13.6(Insulation Resistance
and Electric Strength) |
- |
3000 |
|
Individual test charge 5000/- per sample for this tests. |
| 13.7(Resistance to Heat,
Fire & Tracking) |
- |
7500 |
|
Individual test charge 12000/- per sample for this tests. |
| 13.8(Photometric Test) |
- |
10000 |
|
NA |
|
14 Jun, 2027 |
-
- |
| 203 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 10322 : Part 5 : Sec 7 (2017) |
Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision) |
- |
30000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 20.4(General Test Requireements) |
- |
500 |
|
Individual test charge 1200/- per sample for this tests. |
| 20.5(Classification of Luminaires') |
- |
500 |
|
Individual test charge 1200/- per sample for this tests. |
| 20.6(Marking) |
- |
500 |
|
Individual test charge 1200/- per sample for this tests. |
| 20.7(Construction) |
- |
1000 |
|
Individual test charge 1200/- per sample for this tests. |
| 20.8(Creepage Distance and Clearances) |
- |
1000 |
|
Individual test charge 1200/- per sample for this tests. |
| 20.9(Provision for earthing) |
- |
1000 |
|
Individual test charge 1200/- per sample for this tests. |
| 20.10(Terminals) |
- |
1000 |
|
Individual test charge 1200/- per sample for this tests. |
| 20.11(External & Internal Wiring) |
- |
500 |
|
Individual test charge 1200/- per sample for this tests. |
| 20.12(Protection against electric shock) |
- |
1000 |
|
Individual test charge 1200/- per sample for this tests. |
| 20.13(Endurance Tests and Thermal Tests) |
- |
5000 |
|
Individual test charge 5500/- per sample for this tests. |
| 20.14(Resistance to Dust & Moisture) |
- |
7500 |
|
Individual test charge 12000/- per sample for this tests. |
| 20.15(Insulation Resistance and Electric Strength) |
- |
3000 |
|
Individual test charge 5000/- per sample for this tests. |
| 20.16(Resistance to Heat , fire and tracking) |
- |
7500 |
|
Individual test charge 12000/- per sample for this tests. |
|
14 Jun, 2027 |
-
- |
| 204 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 10322 : PART 5 : SEC 3 (2012) |
Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision) |
- |
40000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(General Test Requireements) |
- |
0 |
|
- |
| 5(Classification of Luminaires') |
- |
0 |
|
- |
| 6.0(Marking) |
- |
1200 |
|
- |
| 7.0(Construction) |
- |
1200 |
|
- |
| 8.0(Creepage Distance and Clearances) |
- |
1200 |
|
- |
| 9.0(Provision for earthing) |
- |
1200 |
|
- |
| 10.0(Terminals) |
- |
1200 |
|
- |
| 11.0(External & Internal Wiring) |
- |
1200 |
|
- |
| 12.0(Protection against electric shock) |
- |
1200 |
|
- |
| 13.0(Endurance Tests and Thermal Tests) |
- |
5500 |
|
- |
| 14.0(Resistance to Dust & Moisture) |
- |
12000 |
|
- |
| 15.0(Insulation Resistance and Electric Strength) |
- |
5000 |
|
- |
| 16.0(Resistance to Heat , fire and tracking) |
- |
12000 |
|
- |
| 17.0(Photometric Test) |
- |
10000 |
|
- |
|
14 Jun, 2027 |
-
- |
| 205 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 10322 : Part 5 : Sec 5 (2013) |
Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision) |
- |
40000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(General Test Requireements) |
- |
0 |
|
- |
| 5(Classification of Luminaires') |
- |
0 |
|
- |
| 6.0(Marking) |
- |
1200 |
|
- |
| 7.0(Construction) |
- |
1200 |
|
- |
| 8.0(Creepage Distance and Clearances) |
- |
1200 |
|
- |
| 9.0(Provision for earthing) |
- |
1200 |
|
- |
| 10.0(Terminals) |
- |
1200 |
|
- |
| 11.0(External & Internal Wiring) |
- |
1200 |
|
- |
| 12.0(Protection against electric shock) |
- |
1200 |
|
- |
| 13.0(Endurance Tests and Thermal Tests) |
- |
5500 |
|
- |
| 14.0(Resistance to Dust & Moisture) |
- |
12000 |
|
- |
| 15.0(Insulation Resistance and Electric Strength) |
- |
5000 |
|
- |
| 16.0(Resistance to Heat , fire and tracking) |
- |
12000 |
|
- |
| 17.0(Photometric Test) |
- |
10000 |
|
- |
|
14 Jun, 2027 |
-
- |
| 206 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 10322 : Part 5 : Sec 6 (2013) |
Luminaires: Part 5 particular requirements: Sec 6 handlamps |
- |
30000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.2(Packing -Each Package shall bear the following Particulars) |
- |
0 |
|
- |
| 4(General Test Requireements) |
- |
0 |
|
- |
| 5(Classification of Luminaires') |
- |
0 |
|
- |
| 6.0(Marking) |
- |
1200 |
|
- |
| 7.0(Construction) |
- |
1200 |
|
- |
| 8.0(Creepage Distance and Clearances) |
- |
1200 |
|
- |
| 9.0(Provision for earthing) |
- |
1200 |
|
- |
| 10.0(Terminals) |
- |
1200 |
|
- |
| 11.0(External & Internal Wiring) |
- |
1200 |
|
- |
| 12.0(Protection against electric shock) |
- |
1200 |
|
- |
| 13.0(Endurance Tests and Thermal Tests) |
- |
5500 |
|
- |
| 14.0(Resistance to Dust & Moisture) |
- |
12000 |
|
- |
| 15.0(Insulation Resistance and Electric Strength) |
- |
5000 |
|
- |
| 16.0(Resistance to Heat , fire and tracking) |
- |
12000 |
|
- |
|
14 Jun, 2027 |
-
- |
| 207 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 3975 (1999) |
Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision) |
- |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Dimensions) |
- |
1000 |
|
- |
| 8.1(Mechanical Properties (as per table 5 of IS 1608)) |
- |
3000 |
|
- |
| 8.2(Mechanical Properties (as per IS 1717)) |
- |
1000 |
|
- |
| 8.3(Mechanical Properties (as per IS 1755)) |
- |
1000 |
|
- |
| 9.1(Galvanizing Requirements ) |
- |
2000 |
|
- |
| 9.2(Galvanizing Requirements ) |
- |
1000 |
|
- |
| 9.3(Galvanizing Requirements ) |
- |
1000 |
|
- |
| 11(Freedom from defects) |
- |
1000 |
|
- |
| 6.2(Sulphur %) |
- |
500 |
|
- |
| 6.2(Phosphorus %) |
- |
500 |
|
- |
| 8.4(Mechanical Properties (as per IS 10810(Part- 42))) |
- |
3000 |
|
- |
|
14 Jun, 2027 |
-
- |
| 208 |
National Test House (WR) - NTH, Mumbai
| 7107604
| IS 3854 (2023) |
Switches for Domestic and Similar Purposes - Specification (Third Revision) |
- |
13000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(General Requirements) |
- |
500 |
|
- |
| Cl-5(General notes on tests) |
- |
500 |
|
- |
| Cl-6(Rating) |
- |
500 |
|
- |
| Cl-7(Classification) |
- |
500 |
|
- |
| Cl-8(Marking) |
- |
500 |
|
- |
| Cl-9(Checking of dimensions) |
- |
500 |
|
- |
| Cl-10.1, 10.2(Prevention of Access to Live Parts) |
- |
500 |
|
- |
| Cl-10.3(Requirements for Accessible Metal Parts) |
- |
500 |
|
- |
| Cl-10.4(Requirements for Insulation of the Mechanism) |
- |
500 |
|
- |
| Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment) |
- |
5000 |
|
- |
| Cl-10.6(Requirements for Switches Operated Indirectly) |
- |
500 |
|
- |
| Cl-10.7(Requirements for Switches with Replaceable Pull Cord) |
- |
500 |
|
- |
| Cl-11(Provision for earthing) |
- |
500 |
|
- |
| Cl-12(Terminals) |
- |
1000 |
|
- |
| Cl-13(Constructional requirements) |
- |
500 |
|
- |
| Cl-14(Mechanism) |
- |
1000 |
|
- |
| Cl-15.1(Resistance to Ageing) |
- |
1500 |
|
- |
| Cl-15.2(Protection Provided by Enclosures of Switches) |
- |
500 |
|
- |
| Cl-15.3(Resistance to Humidity) |
- |
1500 |
|
- |
| Cl-16.1(General) |
- |
500 |
|
- |
| Cl-16.2(Test for Measuring the Insulation Resistance) |
- |
500 |
|
- |
| Cl-16.3(Electric Strength Test) |
- |
1000 |
|
- |
| Cl-17(Temperature rise) |
- |
1000 |
|
- |
| Cl-18(Making and breaking capacity) |
- |
500 |
|
- |
| Cl-19(Normal operation) |
- |
2500 |
|
- |
| Cl-20(Mechanical strength) |
- |
500 |
|
- |
| Cl-21(Resistance to heat) |
- |
1000 |
|
- |
| Cl-22(Screws, current carrying parts and connections) |
- |
500 |
|
- |
| Cl-23(Creepage distances, clearances and distance through sealing compound) |
- |
500 |
|
- |
| Cl-24.1(Resistance to abnormal heat and fire) |
- |
1000 |
|
- |
| Cl-24.2(Resistance to tracking) |
- |
500 |
|
- |
| Cl-25(Resistance to rusting) |
- |
500 |
|
- |
| 19.1(Test for Switches Intended for Inductive Loads) |
- |
1000 |
|
- |
| 19.2(Test for Switches Intended for Externally Ballasted Lamp Loads) |
- |
2500 |
|
- |
| 19.3(Test for Switches Intended for Self-ballasted Lamp Loads) |
- |
2500 |
|
- |
| 13.5(Attachment of knobs) |
- |
1000 |
|
- |
| 12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals) |
- |
1000 |
|
- |
| 12.3.12(Table 13)(Deflection Test Forces) |
- |
500 |
|
- |
|
- |
-
- |
| 209 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 10702 (2023) |
Hawai Chappal-Specification |
- |
31000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Material) |
- |
2000 |
|
- |
| 4.2(Length) |
- |
500 |
|
- |
| 4.3(Thickness) |
- |
500 |
|
- |
| 4.4 , Table No. 1 , i)(Density) |
- |
1000 |
|
- |
| 4.4 , Table No. 1 , iii)(3Split tear strength) |
- |
2000 |
|
- |
| 4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material,
Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber") |
- |
1000 |
|
- |
| 4.4 , Table No. 1 , v)(5Abrasion resistance at applied force) |
- |
1000 |
|
- |
| 4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes) |
- |
2000 |
|
- |
| 4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes) |
- |
2000 |
|
- |
| 4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap) |
- |
1000 |
|
- |
| 4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and
Toe portion to strap , Elongation at break") |
- |
2000 |
|
- |
| 4.4 , Table No . 2 , iii)(Minimum cross section of the stud) |
- |
500 |
|
- |
| 4.4 , Table No . 2 , iv)(Stud bolt) |
- |
500 |
|
- |
| 4.4 , Table No . 3 , iii)(Inter layer bond strength) |
- |
2000 |
|
- |
| Cl. No.5.1,Table no.1 of IS 17011(x)(pH) |
- |
1000 |
|
- |
| Cl.No. 5.2(lead content) |
- |
500 |
|
- |
| Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max) |
- |
500 |
|
- |
| Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only)
- IS 12240 (Part 5) : 1988") |
- |
500 |
|
- |
| Clause 4.1 - 4.1.1(Bottom Material) |
- |
500 |
|
- |
| Clause 4.1 - 4.1.2(Strap Material) |
- |
2000 |
|
- |
| Clause 4.1 - 4.1.3(Material) |
- |
500 |
|
- |
| Clause 4.1 - 4.1.4(Material) |
- |
500 |
|
- |
| Clause 4.2(Material) |
- |
500 |
|
- |
| Clause 4.3 - 4.3.1(Thickness) |
- |
500 |
|
- |
| Clause 4.3 - 4.3.2(Thickness) |
- |
500 |
|
- |
| Clause 4.4 Table 1 -i)(Density, g/cm3, Min) |
- |
1000 |
|
- |
| Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min) |
- |
2000 |
|
- |
| Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent,
Max") |
- |
1000 |
|
- |
| Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max) |
- |
1000 |
|
- |
| Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N) |
- |
1000 |
|
- |
| Clause 4.4 Table 2 -i) - a("Density, g/cm3
Solid strap
") |
- |
1000 |
|
- |
| Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap) |
- |
1000 |
|
- |
| Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min
Strap to strap(Solid Strap)") |
- |
1000 |
|
- |
| Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min
Strap to strap(Cellular Strap)") |
- |
1000 |
|
- |
| Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min
Toe portion to strap(Solid Strap)") |
- |
1000 |
|
- |
| Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min
Toe portion to strap(Cellular Strap)") |
- |
1000 |
|
- |
| Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent
(Applicable to strap to strap
(V shape) Solid Strap") |
- |
1000 |
|
- |
| Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent
(Applicable to strap to strap
(V shape) Cellular Strap") |
- |
1000 |
|
- |
| Clause 4.4 Table 2 -iii) - a("Minimum cross section of the
stud, mm,
Size 1 to 13 (Adult)") |
- |
500 |
|
- |
| Clause 4.4 Table 2 -iii) - b("Minimum cross section of the
stud, mm,
Size 3 to 13 (Children)") |
- |
500 |
|
- |
| Clause 4.4 Table 2 -iv) - a("Stud bolt, mm
Diameter/edge to edge length") |
- |
500 |
|
- |
| Clause 4.4 Table 2 -iv) - b("Stud bolt, mm
Thickness") |
- |
500 |
|
- |
| Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm,
Min") |
- |
1000 |
|
- |
| Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength) |
- |
2000 |
|
- |
| Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max
") |
- |
1000 |
|
- |
| Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max) |
- |
1000 |
|
- |
| Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force) |
- |
1000 |
|
- |
| Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,) |
- |
2000 |
|
- |
| Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth) |
- |
2000 |
|
- |
| Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb),
ppm, Max") |
- |
500 |
|
- |
| Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap
1-Solid strap
2-Cellular strap") |
- |
500 |
|
- |
| Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap
1-Solid strap
2-Cellular strap") |
- |
1000 |
|
- |
| Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min
1-Solid strap
2-Cellular strap") |
- |
1000 |
|
- |
| 6(MARKING AND PACKING) |
- |
500 |
|
- |
| Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength) |
- |
2000 |
|
- |
| Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022) |
- |
1000 |
|
- |
|
14 Jun, 2027 |
-
- |
| 210 |
NATIONAL TEST HOUSE-ER (NTH), KOLKATA
| 5140804
| IS 12894 (2002) |
Pulverized fuel ash - Lime bricks - Specification |
- |
5000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(Dimensions) |
- |
500 |
|
- |
| 7.1, Table -1(Average Wet Compressive Strength) |
- |
2000 |
|
- |
| 7.4(Water Absorption) |
- |
1000 |
|
- |
| 7.3(Efflorescence Test) |
- |
1000 |
|
- |
| 3.1(General Requirements) |
- |
500 |
|
- |
|
14 Jun, 2027 |
-
- |
