BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11942 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

241

BIS, Eastern Regional Laboratory (ERL)

None

IS 2002 (2009)

Steel plate for pressure vessel for intermediate and high temperature service including boilers (Third Revision)

For all grades except for the tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 12 (UTM)	-
Cl 13 (Press)	-
Cl 14 (Workmanship)	-
Cl 9 (Length, Width & Thickness)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
6.1 ( Copper %)	-
6.1 (V)	-
6.1 (Cr)	-
6.1 (Mo)	-
6.1 (Ni)	-
6.1 ( Nitrogen%)	-
6.1 (CE)	-

-
Mech: Except elevated temperature tensile test and Ultrasonic Test

242

AA Electro Magnetic Laboratory Pvt Ltd, Gurugram

8165826

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

172000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	5000	-
8(Protection against accidental contact with live parts)	-	15000	-
9(Terminals)	-	10000	-
10(PROVISION FOR EARTHING)	-	5000	-
11(MOISTURE RESISTANCE)	-	15000	-
12(Electric Strength)	-	10000	-
13(Thermal endurance test for winding of ballasts)	-	0	-
14(Fault conditions)	-	30000	-
15(Transformer heating)	-	30000	-
16(Construction)	-	0	-
17(Creepage distance and clearances)	-	6000	-
18(Screws, current carrying parts and connections)	-	6000	-
19(Resistance to heat, fire and tracking)	-	20000	-
20(Resistance to corrosion)	-	20000	-
16(Enclosures)	-	0	-
16(Bridging resistor in primary circuit)	-	0	-
16(Capacitor and RC units)	-	0	-
16(RF suppression (X-Y capacitors))	-	0	-
16(Inductor)	-	0	-
16(MOV/VDR)	-	0	-
16(SMPS/Mains Transformer)	-	0	-
16(PCB material)	-	0	-
19(Metal base PCB for LED)	-	0	-
19(Transparent cover)	-	0	-
19(Bobbin)	-	0	-
16(Insulated tape)	-	0	-
16(Heat shrinkage sleeve)	-	0	-
19(Terminals)	-	0	-
16(Connector)	-	0	-
16(Fuse)	-	0	-
16(Internal wire)	-	0	-
16(LED)	-	0	-
16(Opto-coupler)	-	0	-
16(Opto-coupler)	-	0	-
16(EMI/EMC filter)	-	0	-
16(Winding wire)	-	0	-
16(Thin sheet materials)	-	0	-
7(Marking)	-	0	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	0	-
9(TERMINALS)	-	0	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	0	-
11(MOISTURE RESISTANCE AND INSULATION)	-	0	-
12(ELECTRIC STRENGTH)	-	0	-
13(THERMAL ENDURANCE TEST FOR WINDINGS OF BALLASTS)	-	0	-
14(FAULT CONDITIONS)	-	0	-
15(TRANSFORMER HEATING)	-	0	-
16(CONSTRUCTION)	-	0	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	0	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	0	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	0	-
20(RESISTANCE TO CORROSION)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
6(CLASSIFICATION)	-	0	-

24 Sep, 2026

-
Included w.e.f. 28.07.2025

243

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 8329 (2000)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Hardness & Tensile Test)	-	3000	-
Cl 11(Hydrostatic Test)	-	5000	-
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	2000	-
Cl 10(Hardness & Tensile Test)	-	0	-
Cl 11(Hydrostatic Test)	-	0	-
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	0	-
Cl 10(Hardness & Tensile Test)	-	0	-
Cl 11(Hydrostatic Test)	-	0	-
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	0	-
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	0	-
Cl 11(Hydrostatic Test)	-	0	-
Cl 10(Hardness & Tensile Test)	-	0	-
Cl 10(Hardness & Tensile Test)	-	0	-
Cl 11(Hydrostatic Test)	-	0	-
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	0	-
7.2(Visual Inspection)	-	100	-
15.6(Straightness *)	-	500	-
13.1 & 15.5(Length & tolerance*)	-	500	-
15.3(Ovality & tolerance)	-	500	-
16.2, Annex- C 2.3(Checking of bitumen base,)	-	500	-

08 May, 2028

-
Included w.e.f.16.07.2025

244

EKO PRO ENGINEERS PRIVATE LIMITED (32/37) GHAZIABAD

8164006

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

N1/N2/N3/N5/N6/N7

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
6(Freedom From Defects)	-	500	-
9.3(Tensile Test-1608:Part 1)	-	1000	-
9.3, Table 3 (Yield Strength, Mpa)	-	1000	-
9.3, Table 3 (Tensile Strength, Mpa)	-	1000	-
9.3, Table 3 (Elongation, %)	-	1000	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	1000	-
11(Surface finish)	-	500	-
12(Dimensions)	-	500	-
14.1(Thickness,mm)	-	500	-
14.2( Width, mm)	-	500	-
14.3(Length, mm)	-	500	-
14.4(Flatness, mm)	-	500	-
14.5(Camber, mm)	-	500	-
Clause 9.1, 9.2 & Table 3(IS 1608 Part 1)	-	1000	-
17(Marking)	-	500	-
Clause 9.1, 9.2 & Table 3(0.2 Percent Yield Strength)	-	1000	-
4.1(General requirements)	-	500	-
6(Freedom from defects)	-	500	-
7(Heat treatment)	-	0	-
8.1, table 1(C Si Mn Ni Cr S P Cu Ni)	-	4500	-
8.1.1, table 2(Carbon Silicon Manganese Nickel Chromium Sulphur Phosphorus Copper Nitrogen)	-	4500	-
9.1(Sample plan)	-	500	-
9.2(Tensile test)	-	1000	-
9.3(Mechanical properties)	-	1000	-
9.4(Erichsen cupping test)	-	1000	-
10(Retests)	-	1000	-
11(Surface finish)	-	500	-
12(Dimensions)	-	500	-
13(Edge condition)	-	500	-
14.1(Thickness)	-	500	-
14.2.1(Mill Edge)	-	500	-
14.2.2(Trimmed Edge)	-	500	-
14.3(Length)	-	500	-
14.4(Flatness)	-	500	-
14.5(Camber)	-	500	-
15(Inspection)	-	500	-
17(Marking)	-	500	-

27 May, 2028

-
Included w.e.f 31.07.2025

245

National Test House (NWR) - NTH, Jaipur

8122904

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

100ml to 5 Litre

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6.3(LEAKAGE TEST)	-	1000	-
4.6.4(DROP TEST)	-	1000	-
4.6.5(MIGRATION TEST)	-	2000	-
4.6.6(PORTABILITY TEST)	-	2000	-
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	2000	-
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	2000	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	1000	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	1000	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	1000	-
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	1000	-
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	1000	-
Cl. 4.5(Cl. 4.5 Wall Thickness (Top))	-	1000	-
4.4 , clause 5 of IS:2798:1998(Brimful capacity in ml)	-	1000	-
4.3(Workmanship, Finish & Appearance)	-	1000	-
4.2(Design, Shape & Dimension )	-	1000	-
4.5 (chem)(a) Wall Thickness, mm Top)	-	500	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (i)(Barium)	-	1000	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii)(Cobalt)	-	1000	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii)(Copper)	-	1000	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (iv)(Iron)	-	1000	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (v)(Lithium)	-	1000	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vi)(Manganese)	-	1000	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (vii)(Zinc)	-	1000	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (viii)(Antimony)	-	1000	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ix)(Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-	1000	-
4.0 (chem)(MATERIAL)	-	1000	-
4.6.2(TRANSPARANCY)	-	1000	-

31 Dec, 2026

-
-

246

National Test House (NWR) - NTH, Jaipur

8122904

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

20mm to 355mm

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Resistance to External Blows at 0°C)	-	1000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	5000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	20000	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	2000	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1000	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1000	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	1000	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500	-
Clause 10.7(Sulphated Ash Content)	-	1000	-
10.1(Colour)	-	500	-
10.3(Effect on Water)	-	2000	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	-
10.3("Effect on Water a) Lead (first extraction) ")	-	5000	-
10.3(b) Lead (Third extraction))	-	1000	-
10.3(d) Cadmium (All three extracts))	-	1000	-
10.3(e) Mercury (All three extracts))	-	1000	-
9.1(PIPE ENDS)	-	1000	-

31 Dec, 2026

-
-

247

National Test House (NWR) - NTH, Jaipur

8122904

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

20mm to 355mm

36000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.7(Density)	-	2000	-
8.4( Melt Flow Rate)	-	2000	-
8.2(Longitudinal Reversion Test)	-	1000	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	5000	-
7.4.1.2(Ovality)	-	0	-
6.2.1(6.1.1 Identification Stripes)	-	0	-
6.2(Colour)	-	0	-
8.6(Overall migration)	-	2000	Inter-laboratory o Chemical Lab of NTH Jaipur
8.3(Carbon black)	-	1500	--
7.4 table -3 & 4(6.1 Dimensions)	-	1000	-
8.10(Slow Crack Growth Rate)	-	20000	For 1000 hrs Testing charge Rs.20,000/- For 500 hrs Testing charges Rs.10000/-
8.9 table-6(Elongation at Break)	-	1000	-
8.8(Tensile Strength for Butt-fusion)	-	1000	Butt fusion facilities not available at present
8.5 (Oxidation Induction Time)	-	2000	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	5000	-
5.2(Volatile matter Content)	-	1000	Interlab to Chemical Lab of NTH Jaipur
5.3(Toluene Extract)	-	1000	Interlab to Chemical Lab of NTH Jaipur
Clause 7.1(Visual Apperance)	-	0	-
Cl. 8.3(Carbon Black Content)	-	1500	-
Clause 8.3(Carbon Black Dispersion)	-	1000	-
7.2(Length)	-	0	-
6.1.4(PIPE DESCRIPTION)	-	0	-
6.1.3 (PIPE DESCRIPTION)	-	0	-

31 Dec, 2026

-
-

248

National Test House (NWR) - NTH, Jaipur

8122904

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 14(Length, Width & Thickness)	-	1000	-
6(Yield Strength-IS:1608(P1))	-	500	-
6(Elongation-IS:1608(P1))	-	500	-
6(Tensile Strength-IS:1608(P1))	-	500	-
Cl 10(Galvanising Test)	-	2000	-
5.1(carbon)	-	500	-
5.1(manganese)	-	500	-
5.1(sulphur)	-	500	-
5.1(phosphorus)	-	500	-
5.1(phosphorus)	-	500	-
5.1(Titanium)	-	500	-
7.4(Mass of Coating: Single Spot Test)	-	500	-
7.4(Mass of Coating: Triple Spot Test)	-	1000	-
Cl 12(Workmanship)	-	500	-
8.3(Bend test miniral diameter)	-	1000	-

31 Dec, 2026

-
-

249

National Test House (NWR) - NTH, Jaipur

8122904

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

Packaged Drinking Water

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Appearance)	-	150	-
5.3/Table 2/xiii(Suphate)	-	200	-
5.4/Annex D/i(P,P-DDT)	-	250	-
5.4/Annex D/ii(Lindane)	-	250	-
5.4/Annex D/iv(b-Endosulfan)	-	250	-
5.4/Annex D/xvi(Dieldrin)	-	250	-
5.4/Annex D/xvi(Aldrin)	-	250	-
5.4/Annex D/i(O,P-DDT)	-	250	-
5.4/Annex D/iv(a-Endosulfan)	-	250	-
5.4/Annex D/iii(d-HCH)	-	250	-
5.4/Annex D/i(O,P-DDD)	-	250	-
5.4/Annex D/i(P,P-DDE)	-	250	-
5.4/Annex D/i(O,P-DDE)	-	250	-
5.4/Annex D/iii(a-HCH)	-	250	-
5.4/Annex D/iii(β- HCH)	-	250	-
5.4/Annex D/iv(Endosulfan sulfate)	-	250	-
5.4/Annex D/i(P,P-DDD)	-	250	-
5.4/Annex D/xii(Alachlor)	-	250	-
5.4/Annex D/vii(Chlorpyrifos)	-	250	-
5.4/Annex D/x(Butachlor)	-	250	-
5.4/Annex D/vi(Ethion)	-	250	-
5.4/Annex D/xiv(Methyl parathion)	-	250	-
5.4/Annex D/xv(Malathion)	-	250	-
5.4/Annex D/viii(Phorate)	-	250	-
5.4/Annex D/v(Monochrotophos)	-	250	-
5.4/Annex D/xiii(Atrazine)	-	250	-
5.4/Annex D/viii(Phorate sulphoxide)	-	250	-
5.4/Annex D/viii(Phorate sulfone)	-	250	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	250	-
5.4/Annex D/xxviii(Malaoxon)	-	250	-
5.4/Annex D/xi(Isoproturon)	-	250	-
5.4/Annex D/ix(2,4 –D)	-	250	-
Cl-5.1(General Requirements)	-	250	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	150	-
Cl-5.3, Table-1 (ii)(Odour)	-	150	-
Cl-5.3, Table-1 (iii)(Taste)	-	150	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	150	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	200	-
Cl-5.3, Table-1 (vi)(pH)	-	150	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	250	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	250	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	250	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	250	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	250	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	250	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	250	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	300	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	300	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	300	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	200	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	300	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	150	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	200	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	200	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	200	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	200	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	300	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	300	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	350	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	200	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	300	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	250	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	300	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	250	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	250	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	250	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	250	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	250	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	250	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	300	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	300	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	250	-
Cl-5.4 (ii)(Total pesticide residue)	-	7000	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	250	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	500	-
Cl-5.2.2(Coliform)	-	500	-
Cl-5.2.3(Faecal streptococci)	-	500	-
Cl-5.2.3(Staphylococcus aureus)	-	500	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	500	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	500	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	250	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	250	-
Cl-5.2.7(Yeast and mould)	-	500	-
Cl-5.2.8(Salmonella)	-	500	-
Cl-5.2.8(shigella)	-	500	-
Cl-5.2.9(Vibrio cholera)	-	500	-
Cl-5.2.9(V.parahaemolyticus)	-	500	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	250	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	150	-
5.4 i)(Dieldrin)	-	250	-
5.4 i)(Aldrin)	-	250	-
5.4 i)(Malathion)	-	250	-
5.4 i)(Methyl Paraoxon)	-	250	-
5.4 i)(Methyl Parathion)	-	250	-
5.4 i)(Atrazine)	-	250	-
5.4 i)(Alachlor)	-	250	-
5.4 i)(Isoproturon)	-	250	-
5.4 i)(Butachlor)	-	250	-
5.4 i)(2,4-D)	-	250	-
5.4 i)(Phorate sulphone)	-	250	-
5.4 i)(Phorate sulphoxide)	-	250	-
5.4 i)(Phorate)	-	250	-
5.4 i)(Chlorpyrifos)	-	250	-
5.4 i)(Ethion)	-	250	-
5.4 i)(Monocrotophos)	-	250	-
5.4 i)(Endosulfan Sulphate)	-	250	-
5.4 i)(beta-Endosulfan)	-	250	-
5.4 i)(alpha-Endosulfan)	-	250	-
5.4 i)(Delta-HCH)	-	250	-
5.4 i)(beta-HCH)	-	250	-
5.4 i)(alpha-HCH)	-	250	-
5.4 i)(Gamma-HCH (Lindane))	-	250	-
5.4 i)(p,p DDD)	-	250	-
5.4 i)(o,p DDD)	-	250	-
5.4 i)(p,p DDE)	-	250	-
5.4, i)(o,p DDE)	-	250	-
5.4 i)(p,p DDT)	-	250	-
5.4 i)(o,p DDT)	-	250	-

31 Dec, 2026

-
Exclusion: Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)), Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),) Cl-5.3, Table-3 (x) (Uranium)

250

National Test House (NWR) - NTH, Jaipur

8122904

IS 5405 (2019)

Sanitary napkins – Specification (second revision)

Small, Medium, Large

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Cover/Top sheet)	-	1000	-
3.2(Absorbent Core)	-	1000	-
3.3(Barrier or Bottom Sheet)	-	1000	-
Cl 5(SIZES, Regular )	-	500	-
Cl 5(SIZES, Large)	-	500	-
Cl 5(SIZES, Extra Large)	-	500	-
6.0(Manufacture, workmanship & finish)	-	500	-
Cl 7.1(pH Value, IS 1390 (cold method) for all sizes)	-	1000	-
Cl 7.2(Ability to Withstand Pressure after Absorption, for all sizes, Annex B)	-	1000	-
Cl 7.3.1(Bacterial and Fungal Bioburden, 7.3.1.1, ISO 11737 (Part 1))	-	2000	-
Cl7.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus, 7.3.2.1, IS 5887 (Part 2))	-	1000	-
Cl 5(SIZES, Regular )	-	500	-
Cl 5(SIZES, Large)	-	500	-
Cl 5(SIZES, Extra Large)	-	500	-
7.6(Pthalate test)	-	3500	-

31 Dec, 2026

-
-

251

National Test House (NWR) - NTH, Jaipur

8122904

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

As per IS

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	1000	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	1000	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	1000	-
10.3(Thickness - IS 4923)	-	1000	-

31 Dec, 2026

-
-

252

National Test House (NWR) - NTH, Jaipur

8122904

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

XLPE insulated, PVC sheathed, armoured cable

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.1 a) i)(Annealing Test ( For copper wire ) )	-	1000	--
15.1 a) iv)(Resistance test - Main conductor)	-	1500	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	500	-
9.2(Thickness of Insulation - Average)	-	500	-
9.3(Thickness of Insulation - Minimum)	-	500	-
14.3(Thickness of outer sheath - AVERAGE)	-	500	-
14.3(Thickness of outer sheath - minimum)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	1000	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	500	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	500	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	500	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	1000	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	500	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	500	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	250	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	250	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	1000	-
15.1 e) v) (Sheath : Hot deformation)	-	500	-
15.1 e) vi) (Sheath : Heat shock test)	-	500	-
15.1 e) vii) (Sheath : Thermalstability)	-	1000	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	2000	-
16.2(HIGH VOLTAGE TEST )	-	2000	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	500	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	1000	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.1.2(Armouring: Coverage )	-	500	-
13.6 a)(ARMOURING: Tensile Strength)	-	500	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	500	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	500	-
16.13(Test for Halogen Acid Gas Evolution)	-	2000	-
16.14(Temperature Index)	-	2000	-
16.9(Oxygen Index Test)	-	2000	-

31 Dec, 2026

-
-

253

National Test House (NER) - NTH, Guwahati

5169204

IS 15833 (2009)

Stainless Steel Tower Bolts -specification

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.2(Carbon Content)	-	580	Cl 4.1 Sheet
Clause 4.2(Silicon)	-	570	Cl 4.1 Sheet
Clause 4.2(Manganese)	-	570	Cl 4.1 Sheet
Clause 4.2(nickel)	-	570	Cl 4.1 Sheet
Clause 4.2(Chromium)	-	570	Cl 4.1 Sheet
Clause 4.2(Sulphur)	-	570	Cl 4.1 Sheet
Clause 4.2(Phosphorus)	-	570	Cl 4.1 Sheet
Clause 4.2(Carbon Content)	-	580	Cl 4.2 Bolt
Clause 4.2(Silicon)	-	570	Cl 4.2 Bolt
Clause 4.2(Manganese)	-	570	Cl 4.2 Bolt
Clause 4.2(nickel)	-	570	Cl 4.2 Bolt
Clause 4.2(Chromium)	-	570	Cl 4.2 Bolt
Clause 4.2(Sulphur)	-	570	Cl 4.2 Bolt
Clause 4.2(Phosphorus)	-	570	Cl 4.2 Bolt
Cl 6(DIMENSIONS)	-	200	-
Cl 6(DIMENSIONS)	-	200	-
Cl 6(DIMENSIONS)	-	200	-
Cl 6(DIMENSIONS)	-	200	-
Cl 6(DIMENSIONS)	-	200	-
Cl 6(DIMENSIONS)	-	200	-
Cl 6(DIMENSIONS)	-	200	-
Cl 6(DIMENSIONS)	-	200	-
Cl 6(DIMENSIONS)	-	200	-
Cl 6(DIMENSIONS)	-	200	-
Cl 3(NOMINAL SIZES)	-	1000	-
Cl 5(MANUFACTURE)	-	1000	-
Cl 7(0)	-	1000	-
8(Marking)	-	1000	-

13 Dec, 2027

-
-

254

National Test House (NER) - NTH, Guwahati

5169204

IS 15834 (2020)

Stainless Steel Sliding Door Bolts ( Aldrops ) for Use With Padlocks - Specification ( First Revision )

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
5(DIMENSIONS AND TOLERANCES)	-	150	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	150	-
6(MANUFACTURE)	-	1000	-
7(FINISH)	-	1000	-
8(Marking)	-	1000	-
Cl.4(Carbon)	-	1000	Cl 4.1 Sheet & Cl 4.2 Bolt
Cl.4(Sulphur)	-	1000	Cl 4.1 Sheet & Cl 4.2 Bolt
Cl.4(Phosphorus)	-	1000	Cl 4.1 Sheet & Cl 4.2 Bolt
Cl.4(Manganese)	-	1000	Cl 4.1 Sheet & Cl 4.2 Bolt
Cl.4(Silicon)	-	1000	Cl 4.1 Sheet & Cl 4.2 Bolt
Cl.4(Nickel)	-	1000	Cl 4.1 Sheet & Cl 4.2 Bolt
Cl.4(Chromium)	-	1000	Cl 4.1 Sheet & Cl 4.2 Bolt
Cl.4(Copper)	-	1000	Cl 4.1 Sheet & Cl 4.2 Bolt
Cl.4(Molybdenum)	-	1000	Cl 4.1 Sheet & Cl 4.2 Bolt
Cl.4(Nitrogen)	-	1000	Cl 4.1 Sheet & Cl 4.2 Bolt
Cl.4(Titanium)	-	0	Cl 4.1 Sheet & Cl 4.2 Bolt
Cl.4(Niobium)	-	0	Cl 4.1 Sheet & Cl 4.2 Bolt
Sub-Clause. 10.3.3(corrosion resistance)	-	5000	Cl.10.3.3

13 Dec, 2027

-
-

255

National Test House (NER) - NTH, Guwahati

5169204

IS 455 (2015)

Portland slag cement - Specification

Portland Slag Cement

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	1000	-
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	1000	-
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	1000	-
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	500	-
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	500	-
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	1000	-
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	500	-
7 Table 1 i(Fineness IS 4031(Part 2))	-	1000	-
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	1000	-
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	1000	-
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	500	-
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	-

13 Dec, 2027

-
-

256

National Test House (NER) - NTH, Guwahati

5169204

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Carbon %)	-	400	-
4.1(Manganese %)	-	300	-
4.1(Phosphorus %)	-	400	-
4.1(Sulphur %)	-	400	-
4.1(Silicon %)	-	300	-
4.1( Copper %)	-	300	-
4.1( Nb)	-	300	-
4.1(V)	-	300	-
4.1(Cr)	-	300	-
4.1(Mo)	-	300	-
4.1(Ni)	-	300	-
4.1( Nitrogen%)	-	300	-
4.1(CE)	-	400	-
4.1(Sulphur and phosphorous)	-	400	-
4.2(Boron (B))	-	300	-
Cl 7.2(Weight)	-	1000	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	700	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	700	-
Cl. 8.1 Table 3(Elongation, percentage)	-	700	-
8.18.1 Table 3(Total elongation at maximum force)	-	700	-
Cl. 9.3, Table 4(Bend Test )	-	1000	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1500	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	1000	-
Cl. 8.1 Table 3(TS/YS ratio)	-	700	-

13 Dec, 2027

-
-

257

National Test House (NER) - NTH, Guwahati

5169204

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

PPC(CALCINED CLAY BASED)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1000	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	-
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	-

13 Dec, 2027

-
-

258

National Test House (NER) - NTH, Guwahati

5169204

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

PPC(FLY ASH BASED)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1000	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	-
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-

13 Dec, 2027

-
-

259

National Test House (NER) - NTH, Guwahati

5169204

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC 33/43/ 53 Grade,OPC 43S & 53S Grade

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 vii(Chloride content)	-	500	-
6.1 Table-2 viii(Alkali content)	-	2000	-
6.1 Table-2 vi(Loss on ignition)	-	500	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	1000	-
6.1 Table-2 iv(Magnesia)	-	1000	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	1000	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	1000	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	1000	-
7 Table-3 i.(Fineness)	-	1000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	500	-
7 Table-3 ii b(Expansion by Autoclave)	-	1000	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-

13 Dec, 2027

-
-

260

National Test House (NER) - NTH, Guwahati

5169204

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	500	-
Cl-5.2.2(Coliform)	-	500	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	500	-
Cl-5.2.3(Staphylococcus aureus)	-	500	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	500	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	500	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	500	-
Cl-5.2.3(Faecal streptococci)	-	500	-
Cl-5.2.9(Vibrio cholera)	-	500	-
Cl-5.2.9(V.parahaemolyticus)	-	500	-
Cl-5.2.8(shigella)	-	500	-
Cl-5.2.8(Salmonella)	-	500	-
Cl-5.2.7(Yeast and mould)	-	500	-
5.3(Appearance)	-	500	-
5.4/Annex D/i(P,P-DDT)	-	500	-
5.4/Annex D/ii(Lindane)	-	500	-
5.4/Annex D/iv(b-Endosulfan)	-	500	-
5.4/Annex D/xvi(Dieldrin)	-	500	-
5.4/Annex D/xvi(Aldrin)	-	500	-
5.4/Annex D/i(O,P-DDT)	-	500	-
5.4/Annex D/iv(a-Endosulfan)	-	500	-
5.4/Annex D/iii(d-HCH)	-	500	-
5.4/Annex D/i(O,P-DDD)	-	500	-
5.4/Annex D/i(P,P-DDE)	-	500	-
5.4/Annex D/i(O,P-DDE)	-	500	-
5.4/Annex D/iii(a-HCH)	-	500	-
5.4/Annex D/iii(β- HCH)	-	500	-
5.4/Annex D/iv(Endosulfan sulfate)	-	500	-
5.4/Annex D/i(P,P-DDD)	-	500	-
5.4/Annex D/xii(Alachlor)	-	500	-
5.4/Annex D/vii(Chlorpyrifos)	-	500	-
5.4/Annex D/x(Butachlor)	-	500	-
5.4/Annex D/vi(Ethion)	-	500	-
5.4/Annex D/xiv(Methyl parathion)	-	500	-
5.4/Annex D/xv(Malathion)	-	500	-
5.4/Annex D/viii(Phorate)	-	500	-
5.4/Annex D/v(Monochrotophos)	-	500	-
5.4/Annex D/xiii(Atrazine)	-	500	-
5.4/Annex D/viii(Phorate sulphoxide)	-	500	-
5.4/Annex D/viii(Phorate sulfone)	-	500	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	500	-
5.4/Annex D/xxviii(Malaoxon)	-	500	-
5.4/Annex D/xi(Isoproturon)	-	500	-
5.4/Annex D/ix(2,4 –D)	-	500	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	500	-
Cl-5.3, Table-1 (ii)(Odour)	-	500	-
Cl-5.3, Table-1 (iii)(Taste)	-	500	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	500	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	500	-
Cl-5.3, Table-1 (vi)(pH)	-	500	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	500	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	500	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	500	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	500	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	500	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	500	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	500	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	500	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	500	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	500	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	500	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	500	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	500	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	500	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	500	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	500	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	500	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	500	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	500	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	500	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	500	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	500	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	500	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	500	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	500	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	500	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	500	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	500	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	500	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	500	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	500	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	500	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	1000	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	1000	-
Cl-5.4 (ii)(Total pesticide residue)	-	5000	-

13 Dec, 2027

-
Exclusion: Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)), Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),) Cl-5.3, Table-3 (x) (Uranium)

261

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : Part 2 : Sec 2 (2024)

Medical electrical equipment Part 2 Particular requirements for basic safety and essential performance Section 2 High frequency surgical equipment and high frequency surgical accessories First revision

580000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	70000	-
201.5(General requirements for testing of ME EQUIPMENT)	-	70000	-
201.6(Classification of ME EQUIPMENT and ME SYSTEMS)	-	70000	-
201.7(ME EQUIPMENT identification, marking and documents)	-	30000	-
201.8(Protection against electrical HAZARDS from ME EQUIPMENT)	-	80000	-
201.9(Protection against MECHANICAL HAZARDS of ME EQUIPMENT and ME SYSTEMS)	-	70000	-
201.10(Protection against unwanted and excessive radiation HAZARDS)	-	50000	-
201.11(Protection against excessive temperatures and other HAZARDS)	-	50000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	100000	-
201.13(HAZARDOUS SITUATIONS and fault conditions for ME EQUIPMENT)	-	50000	-
201.14(PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS))	-	50000	-
201.15(Construction of ME EQUIPMENT)	-	50000	-
201.16(ME SYSTEMS)	-	30000	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	30000	-

05 Nov, 2026

-
Included w.e.f.09.04.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME equipment and ME systems) Cl 202 (Electromagnetic compatibility-Requirement and tests)

262

Astute Labs Pvt Ltd, Pune

7174321

IS 13450 : Part 2 : Sec 12 (2023)

Medical Electrical Equipment Part 2 Particular requirements for basic safety and essential performance Section 12 Critical care ventilators (First Revision)

850000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
201.4(General requirements)	-	50000	-
201.5(General requirements for testing of ME equipment)	-	50000	-
201.6(Classification of ME equipment and ME systems)	-	50000	-
201.7(ME equipment identification, marking and documents)	-	50000	-
201.8(Protection against electrical hazards from ME equipment)	-	50000	-
201.9(Protection against mechanical hazards of ME equipment and ME systems)	-	50000	-
201.1(Protection against unwanted and excessive radiation hazards)	-	50000	-
201.11(Protection against excessive temperatures and other hazards)	-	50000	-
201.12(Accuracy of controls and instruments and protection against hazardous outputs)	-	50000	-
201.13(Hazardous situations and fault conditions for ME equipment)	-	35000	-
201.14(Programmable electrical medical systems (PEMS))	-	30000	-
201.15(Construction of ME equipment)	-	30000	-
201.16(ME systems)	-	30000	-
201.101(Gas connections)	-	30000	-
201.102(Requirements for the VBS and accessories)	-	30000	-
201.103(Spontaneous breathing during loss of power supply)	-	30000	-
201.104(Indication of duration of operation)	-	30000	-
201.105(Functional connection)	-	30000	-
201.106(Display loops)	-	30000	-
201.107(Timed ventilatory pause)	-	30000	-
206(Usability)	-	35000	-
208(General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems)	-	30000	-

05 Nov, 2026

-
Included w.e.f.09.04.2025 Exclusion Cl 201.17 (Electromagnetic compatibility of ME equipment and ME systems) Cl 202 (Electromagnetic compatibility-Requirement and tests)

263

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1, Table-1(Si)	-	1000	-
Cl-6.1, Table-1(Fe)	-	1000	-
Cl-6.1, Table-1(Cu)	-	1000	-
Cl-6.1, Table-1(Mn)	-	1000	-
Cl-6.1, Table-1(Mg)	-	1000	-
Cl-6.1, Table-1(Cr)	-	1000	-
Cl-6.1, Table-1(Ni)	-	1000	-
Cl-6.1, Table-1(Zn)	-	1000	-
Cl-6.1, Table-1(Pb)	-	1000	-
Cl-6.1, Table-1(Sn)	-	1000	-
Cl-6.1, Table-1(Ti)	-	1000	-
Cl-6.1, Table-1(Others elements Each)	-	1000	-
Cl-6.1, Table-1(Others elements Total)	-	5000	-
Cl-6.1, Table-1(Aluminium)	-	1000	-
Cl-6.2(The chemical analysis)	-	5000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	1000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	1000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	1000	-
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	1000	-
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	1000	-
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	1000	-
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	1000	-
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	1000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	1000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	1000	-
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	1000	-
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	1000	-
Cl-7.2(Tensile Tests)	-	1000	-
Cl-7.3(Test Pieces)	-	0	-
Cl-7.4(Hardness)	-	1000	-
Cl-8(Freedom from Defects)	-	1000	-
Cl-11(RETEST)	-	0	-
Cl-13(Marking)	-	100	-
Cl. 6(Silicon)	-	1000	-
Cl. 6(Iron)	-	1000	-
Cl. 6(Copper)	-	1000	-
Cl. 6(Manganese)	-	1000	-
Cl. 6(Magnesium)	-	1000	-
Cl. 6(Chromium)	-	1000	-
Cl. 6(Nickel)	-	1000	-
Cl. 6(Zinc)	-	1000	-
Cl. 6(Lead)	-	1000	-
Cl. 6(Tin)	-	1000	-
Cl. 6(Titanium)	-	1000	-
Cl. 6(Others Element Each)	-	1000	-
Cl. 6(Others Element Total)	-	5000	-
Cl. 6(Aluminium)	-	1000	-
Cl. 6(Silver)	-	1000	-
Cl. 6(Zirconium)	-	1000	-
Cl. 6(Titanium+Zirconium)	-	1000	-
Cl. 6(Antimony)	-	1000	-
Cl. 6(Cobalt)	-	1000	-
Cl. 6(Antimony+Cobalt)	-	1000	-
Cl. 6(Beryllium)	-	1000	-
10(Pressure Test)	-	1500	-

08 May, 2028

-
Included w.e.f 23.07.2025

264

NATIONAL TEST HOUSE (SOUTHERN REGION) - NTH, CHENNAI

6122704

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

11180 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Fineness 4031 Part 2)	-	1118	ALL FEES ARE INCLUDING GST
5.2.1(Expansion by Le Chatelier- 4031 Part 3)	-	590	ALL FEES ARE INCLUDING GST
5.2.1(Expansion by Autoclave- 4031 Part 3)	-	1118	ALL FEES ARE INCLUDING GST
5.3 a)(Setting Time Initial- 4031 Part 5)	-	590	ALL FEES ARE INCLUDING GST
5.3 b)(Setting Time Final- 4031 Part 5)	-	590	ALL FEES ARE INCLUDING GST
5.5 i)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1118	ALL FEES ARE INCLUDING GST
5.5 ii)(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1118	ALL FEES ARE INCLUDING GST
5.5 iii)(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1118	ALL FEES ARE INCLUDING GST
4.1 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	700	-
4.1 - Table - 1 iii(Magnesia - Cl 4.8 of IS 4032:1985)	-	700	-
4.1 - Table - 1 iv(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	700	-
4.1 - Table - 1 v(Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-	700	-
4.1 - Table - 1 vi(Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate ( C4AF + 2C3A ) - Cl 4 of IS 4032:1985)	-	700	-
4.1 - Table - 1 vii(Total loss on ignition - Cl 4.2 of IS 4032:1985)	-	700	-

28 Nov, 2025

-
-

265

NATIONAL TEST HOUSE (SOUTHERN REGION) - NTH, CHENNAI

6122704

IS 303 (1989)

Plywood for General Purposes -

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	3000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	3000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	3000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	3000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	3000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	3000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	3000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	3000	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1500	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	2000	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	2000	-
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	500	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	500	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	1000	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	1000	-
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	2000	-
5.1(Type - For BB Type)	-	500	-
5.1(Type - For AB Type)	-	500	-
5.1(Type - For AA Type)	-	500	-
4(Grade - For MR grade)	-	1000	-
4(Grade - For BWR grade)	-	1000	-
cl. 13.1(marking)	-	1000	-
cl. 13.2(marking)	-	1000	-
Cl-12 (Amendment No-2 OF IS 303)(OPTIONAL REQUIREMENT FOR ECO MARK)	-	1000	-
CL-8.2(Thickness)	-	1000	-
CL-7.2.3(Grain Direction)	-	1000	-
CL-7.2.1(Thickness)	-	1000	-
CL-6.2(Adhesive)	-	1000	-
CL-7.2.5.1(Gaps in cores and cross-bands)	-	1000	-

28 Nov, 2025

-
-

266

NATIONAL TEST HOUSE (SOUTHERN REGION) - NTH, CHENNAI

6122704

IS 710 (2010)

Marine plywood - Specification (Second Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(MARKING)	-	500	-
11.2(MARKING)	-	500	-
7.1(WORKMANSHIP AND FINISH )	-	500	-
7.2(WORKMANSHIP AND FINISH )	-	500	-
7.3(WORKMANSHIP AND FINISH )	-	500	-
7.5(WORKMANSHIP AND FINISH )	-	500	-
6.1(DIMENSIONS)	-	1000	-
6.1(DIMENSIONS)	-	1000	-
6.2(DIMENSIONS)	-	1000	-
6.3(DIMENSIONS)	-	1000	-
6.3(DIMENSIONS)	-	1000	-
9.1.1(MOISTURE CONTENT)	-	1000	-
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	2000	-
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	2000	-
9.1.3 , 9.1.3.1.1(Water resistance test)	-	2000	-
9.1.3 , 9.1.3.1.2(Water resistance test)	-	2000	-
9.1.5(Mycological test)	-	2500	-
9.1.5 , 9.1.3.1.1(Mycological test)	-	2500	-
9.1.5 , 9.1.3.1.2(Mycological test)	-	2500	-
9.1.4(Tensile strength)	-	2500	-
9.1.6 (Table 3)(Static bending strength)	-	3000	-
9.1.6 (Table 3)(Static bending strength)	-	3000	-
9.1.7 (Table 4)(Wet bending strength)	-	3000	-
9.1.7 (Table 4)(Wet bending strength)	-	3000	-
9.1.8(Retention of preservative)	-	3000	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	3000	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Average))	-	3000	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	3000	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Average))	-	3000	-
Cl. 9.1.7 (Table 4)(Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	3000	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Average))	-	3000	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	3000	-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Average))	-	3000	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	3000	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-	3000	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	3000	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-	3000	-
Cl. 9.1.6 (Table 3)(Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	3000	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	3000	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	3000	-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-	3000	-
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	2500	-
Cl. 9.1.4 (Cl. 9.1.4 (Tensile Strength: Perpendicular to grain))	-	2500	-
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Parallel to grain))	-	2500	-
Cl.9.1.5,9.1.3.1.1 (Cl.9.1.5 (Mycological Test),9.1.3.1.1 (Glue Shear Strength: Individual))	-	2500	-
Cl.9.1.5,9.1.3.1.1 (Cl.9.1.5 (Mycological Test),9.1.3.1.1 ( Glue Shear Strength: Average))	-	2500	-
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test) , 9.1.3.1.1 (Glue Shear Strength: Individual))	-	2000	-
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test ), 9.1.3.1.1 (Glue Shear Strength: Average))	-	2000	-
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Individual))	-	2000	-
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Average ))	-	2000	-
cl.5.1(manufacture - Veneers)	-	1000	-
cl.5.1(manufacture - Veneers - moisture content)	-	1000	-
cl.5.1.1(manufacture - Veneers - Defects in Veneers)	-	1000	-
cl.5.2.2(Assembly - Thickness of Veneers)	-	1000	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	1000	-
CL-5.2.3(Joint in Veneers)	-	1000	-
CL-5.2.4(Grain Direction)	-	1000	-
CL-5.4(Moisture Content)	-	1000	-
CL-4.2.1(Adhesive)	-	1000	-

28 Nov, 2025

-
-

267

NATIONAL TEST HOUSE (SOUTHERN REGION) - NTH, CHENNAI

6122704

IS 1077 (1992)

Common burnt clay building bricks - Specification (Fifth Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Common burnt clay bricks)	-	500	-
5(General Quality)	-	500	-
6.1(Dimensions)	-	1000	-
6.2(Tolerances)	-	1000	-
7.1(Compressive strength)	-	2000	-
7.2(Water Absorption)	-	1000	-
7.3(Efflorescence)	-	1000	-
9(Marking)	-	500	-

28 Nov, 2025

-
-

268

NATIONAL TEST HOUSE (SOUTHERN REGION) - NTH, CHENNAI

6122704

IS 12894 (2002)

Pulverized fuel ash - Lime bricks - Specification

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General Requirements)	-	500	-
3.2(General Requirements)	-	500	-
3.3(General Requirements)	-	500	-
3.4(General Requirements)	-	500	-
3.5(General Requirements)	-	500	-
5.1(Dimensions)	-	500	-
7.1, Table -1(Average Wet Compressive Strength)	-	2000	-
7.2(Drying Shrinkage)	-	2000	-
7.3(Efflorescence Test)	-	1000	-
7.4(Water Absorption)	-	1000	-
5.2(Tolerance)	-	500	-
9(Marking)	-	500	-
6(Materials)	-	500	-

28 Nov, 2025

-
-

269

NATIONAL TEST HOUSE (SOUTHERN REGION) - NTH, CHENNAI

6122704

IS 1328 (1996)

Veneered Decorative Plywood -Specification

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Grade - For BWR)	-	1000	-
4.1(Grade - For MR)	-	1000	-
4.2(Type - For Type 1)	-	1000	-
4.2(Type - For Type 2)	-	1000	-
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	1000	-
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	1000	-
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	1000	-
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	1000	-
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	1000	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	1000	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	1000	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	1000	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	1000	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	1000	-
9(Finish - Cl. 9.1, 8.3)	-	1000	-
9(Finish - Cl. 9.2, 8.3)	-	1000	-
11(Tests - Moisture Content - Part 1 of IS 1734)	-	1000	-
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	2000	-
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	2000	-
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	1000	-

28 Nov, 2025

-
-

270

NATIONAL TEST HOUSE (SOUTHERN REGION) - NTH, CHENNAI

6122704

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

1100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	2000	-
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	2000	-
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	2000	-
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	2000	-
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	2000	-
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	2000	-
9.2.3(Adhesion of Plies - Annexure H)	-	2000	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	2000	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	2000	-
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	1000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	1000	-
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	1000	-
7.3(Dimensional Requirements - Thickness - Annexure E)	-	1000	-
7.3(Dimensional Requirements - Width - 8.1.4)	-	1000	-
7.3(Dimensional Requirements - Length - 8.1.4)	-	1000	-
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	1000	-
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	1000	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	2000	-
cl. 11(marking)	-	1000	-
cl. 11.1(marking - BIS certification marking)	-	1000	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	1000	-
7.3(Dimensional Requirements - Squareness - Annexure D)	-	1000	-
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	1000	-

28 Nov, 2025

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number