| 271 |
NATIONAL TEST HOUSE(SR), Chennai
| 6122704
| IS 9537 : Part 2 (1981) |
Specification for conduits for electrical installations: Part 2 rigid steel conduits |
- |
8000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.3(Marking, Cl. 6.4 of IS 9537-1) |
- |
1000 |
|
- |
| 7.2.1(Dimensions, (Minimum outside Diameter), IS 9537-2) |
- |
1000 |
|
- |
| 7.2.2(Dimensions (Maximum outside Diameter), IS 9537-2) |
- |
1000 |
|
- |
| 7.3(Dimensions (Wall thickness), IS 9537-2) |
- |
1000 |
|
- |
| 7.4(Screw threads, IS 9537-2) |
- |
0 |
|
- |
| 9.2(Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1) |
- |
1000 |
|
- |
| 9.3(Mechanical Properties (Compression Test), IS 9537-2) |
- |
2000 |
|
- |
| 13(External Influences, IS 9537-2) |
- |
2000 |
|
- |
|
28 Nov, 2028 |
-
- |
| 272 |
National Test House (NWR) - NTH, Jaipur
| 8122904
| IS 8041 (1990) |
Rapid hardening portland cement - Specific4tion (Second Revision) |
- |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1(Fineness 4031 Part 2) |
- |
1000 |
|
-- |
| 6.2.1(Expansion by Le Chatelier- 4031 Part 3) |
- |
1000 |
|
-- |
| 6.2.1.1(Expansion after aeration - 4031 Part 3) |
- |
1000 |
|
-- |
| 6.2.1(Expansion by Autoclave- 4031 Part 3) |
- |
1000 |
|
-- |
| 6.2.1.1(Expansion after aeration- 4031 Part 3) |
- |
1000 |
|
-- |
| 6.3 a)(Setting Time Initial- 4031 Part 5) |
- |
500 |
|
-- |
| 6.3 b)(Setting Time Final- 4031 Part 5) |
- |
500 |
|
-- |
| 6.4 a)(Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6) |
- |
1000 |
|
-- |
| 6.4 b)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
1000 |
|
-- |
| 5.1 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985) |
- |
500 |
|
- |
| 5.1 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985) |
- |
1000 |
|
- |
| 5.1 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985) |
- |
500 |
|
- |
| 5.1 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985) |
- |
1000 |
|
- |
| 5.1 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985) |
- |
500 |
|
- |
| 5.1 - Table - 1 vi(Total loss on ignition - Cl 4.2 of IS 4032:1985) |
- |
500 |
|
- |
|
31 Dec, 2026 |
-
- |
| 273 |
National Test House (NWR) - NTH, Jaipur
| 8122904
| IS 383 (2016) |
Coarse and Fine Aggregate for Concrete - Specification (Third Revision) |
Coarse/Fine |
17250 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 5.1(General) |
- |
15000 |
|
- |
| 5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate)) |
- |
0 |
|
- |
| 5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate)) |
- |
1000 |
|
- |
| 5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate )) |
- |
500 |
|
- |
| 5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate)) |
- |
500 |
|
- |
| 5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate )) |
- |
500 |
|
- |
| 5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness) |
- |
2000 |
|
- |
| 5.5-IS: 2386 (P-5)(Soundness (fine aggregate)) |
- |
2000 |
|
- |
| 5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate)) |
- |
0 |
|
- |
| 5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate )) |
- |
500 |
|
- |
| 5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate )) |
- |
500 |
|
- |
| 5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate)) |
- |
500 |
|
- |
| 5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate)) |
- |
500 |
|
- |
| 5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate)) |
- |
500 |
|
- |
|
31 Dec, 2026 |
-
- |
| 274 |
National Test House (NWR) - NTH, Jaipur
| 8122904
| IS 1489 : Part 2 (2015) |
Portland - Pozzolana cement - Specification: Part 2 calcined clay based |
Calcined clay based |
11000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 -Table 2- i(Fineness 4031 Part 2) |
- |
1000 |
|
- |
| 7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3) |
- |
500 |
|
- |
| 7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3) |
- |
0 |
|
- |
| 7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3) |
- |
500 |
|
- |
| 7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3) |
- |
0 |
|
- |
| 7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5) |
- |
500 |
|
- |
| 7 -Table 2-iii- b(Setting Time Final- 4031 Part 5) |
- |
500 |
|
- |
| 7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
1000 |
|
- |
| 7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
1000 |
|
- |
| 7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
1000 |
|
- |
| 7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10) |
- |
1000 |
|
- |
| 6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985) |
- |
500 |
|
- |
| 6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985) |
- |
500 |
|
- |
| 6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
2000 |
|
- |
|
31 Dec, 2026 |
-
- |
| 275 |
NATIONAL TEST HOUSE(SR), Chennai
| 6122704
| IS 1786 (2008) |
High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision) |
- |
27000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 9.4(Load In Other Direction From Bend) |
- |
500 |
|
- |
| Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous) |
- |
1180 |
|
INCLUDING 18 % GST |
| Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent) |
- |
1180 |
|
INCLUDING 18 % GST |
| Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228) |
- |
1180 |
|
INCLUDING 18 % GST |
| Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228) |
- |
1180 |
|
INCLUDING 18 % GST |
| Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228) |
- |
1180 |
|
INCLUDING 18 % GST |
| Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar)) |
- |
1000 |
|
- |
| Cl. 5.7(Bond Strength at 0.25 mm slip) |
- |
15000 |
|
Rs 10000/- for 8mm- 12mm, Rs 15000 for 16mm- 32mm. |
| Cl 7.2(Weight) |
- |
1000 |
|
- |
| Cl. 9.3, Table 4(Bend Test ) |
- |
1000 |
|
- |
| Cl.9.4 & Cl. 9.4.1(Rebend test) |
- |
1000 |
|
- |
|
28 Nov, 2028 |
-
- |
| 276 |
NATIONAL TEST HOUSE(SR), Chennai
| 6122704
| IS 2347 (2023) |
DOMESTIC PRESSURE COOKER � SPECIFICATION |
- |
56000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Gross capacity) |
- |
500 |
|
- |
| 4.2(Body Capacity) |
- |
0 |
|
- |
| 5.1(Body, Lid, Containers and Grid) |
- |
3000 |
|
Body chemical composition |
| 5.1.2(Body and Lid ) |
- |
3000 |
|
Lid chemical composition |
| 5.3(Gasket) |
- |
1000 |
|
- |
| 5.4(Handles and Knobs) |
- |
11000 |
|
As per IS 13395 |
| 5.12(Gasket Release System) |
- |
0 |
|
- |
| 8.1(Air Pressure Test ) |
- |
1000 |
|
- |
| 8.2(Proof Pressure Test ) |
- |
2000 |
|
- |
| 8.3(Operating Test for Pressure Regulating Device ) |
- |
1000 |
|
- |
| 8.4(Test for Safety Relief Device ) |
- |
2000 |
|
- |
| 8.5(Bursting Pressure Test ) |
- |
3000 |
|
- |
| 8.6(Test for Removal of Lid under Pressure ) |
- |
1000 |
|
- |
| 8.8(Composite Cooker Base ) |
- |
8000 |
|
As per IS 15960 |
| 8.9(Aluminium induction compatible Base ) |
- |
4000 |
|
- |
| 8.1(Handles of cooker ) |
- |
0 |
|
- |
| 8.14(Ply construction cooker Body ) |
- |
4000 |
|
- |
| 8.17(Test for Effectiveness for Induction Bottom) |
- |
2000 |
|
- |
| 11(Marking ) |
- |
0 |
|
- |
| 12(Packing ) |
- |
0 |
|
- |
| 6.1.1(Pressure Regulating Device) |
- |
500 |
|
- |
| 7(Workmanship and Finish ) |
- |
9000 |
|
As per Annex H of IS 2347 |
| 5.1.3(Stainless steel pressure cooker) |
- |
0 |
|
- |
| 5.1.4(Aluminium cooker ) |
- |
0 |
|
- |
| 5.2(Safety Relief Device) |
- |
2000 |
|
- |
| 5.5(Pressure Regulating Device ) |
- |
2000 |
|
- |
| 5.6(Vent Seal Pin for Pressure Regulating Device ) |
- |
2000 |
|
- |
| 5.7(Vent Pipe ) |
- |
2000 |
|
- |
| 5.8(Vent Pipe Nut ) |
- |
2000 |
|
- |
| 5.9(Spring ) |
- |
2000 |
|
- |
| 5.1(Material of Rim ) |
- |
2000 |
|
- |
| 5.11(Visual Pressure Indicator) |
- |
2000 |
|
- |
| 6(Construction) |
- |
0 |
|
- |
| 8.7(Test for Spring Loaded Mechanism ) |
- |
0 |
|
- |
| 8.11(External Coating) |
- |
4000 |
|
- |
| 8.12(Internal Coating ) |
- |
8000 |
|
- |
| 8.13(Integral electrical heating) |
- |
0 |
|
- |
| 8.15.1(Fragmentation Test ) |
- |
1000 |
|
- |
| 8.15.2(Ball Drop Test ) |
- |
1000 |
|
- |
| 8.15.3(Thermal Shock Test ) |
- |
1000 |
|
- |
| 8.15.4(Free Fall Test) |
- |
1000 |
|
- |
| 4(Capacity) |
- |
0 |
|
- |
| 4.2(Body Capacity) |
- |
0 |
|
- |
| 5.1.1(Body, Lid, Containers and Grid) |
- |
0 |
|
- |
| 5.1.2(Body, Lid, Containers and Grid) |
- |
0 |
|
- |
| 5.1.3(Body, Lid, Containers and Grid) |
- |
0 |
|
- |
| 5.1.4(Body, Lid, Containers and Grid) |
- |
0 |
|
- |
| 5.1.5(Body, Lid, Containers and Grid) |
- |
0 |
|
- |
| 5.2.1(Destructive Type Safety Relief Device) |
- |
0 |
|
- |
| 5.2.2(Resettable Type Safety Relief Device) |
- |
0 |
|
- |
| 5.3(Gasket) |
- |
0 |
|
- |
| 5.4(Handles and Knobs) |
- |
0 |
|
- |
| 5.5(Pressure Regulating Device) |
- |
0 |
|
- |
| 5.6(Vent Seal Pin for Pressure Regulating Device) |
- |
0 |
|
- |
| 5.7(Vent Pipe) |
- |
0 |
|
- |
| 5.8(Vent Pipe Nut) |
- |
0 |
|
- |
| 5.9(Spring) |
- |
0 |
|
- |
| 5.10(Spring) |
- |
0 |
|
- |
| 5.11(Visual Pressure Indicator) |
- |
0 |
|
- |
| 5.12(Gasket Release System) |
- |
0 |
|
- |
| 6(CONSTRUCTION) |
- |
0 |
|
- |
| 6.1(Pressure Regulating Device) |
- |
0 |
|
- |
| 6.1.1(Minimum Inside diameter of Vent Pipe.) |
- |
0 |
|
- |
| 6.1.2(Pressure Regulating Device) |
- |
0 |
|
- |
| 6.1.3(Pressure Regulating Device) |
- |
0 |
|
- |
| 6.1.4(Pressure Regulating Device) |
- |
0 |
|
- |
| 6.1.5(Pressure Regulating Device) |
- |
0 |
|
- |
| 6.1.6(Pressure Regulating Device) |
- |
0 |
|
- |
| 6.2(Safety Relief Device) |
- |
0 |
|
- |
| 6.2.1(Safety Relief Device) |
- |
0 |
|
- |
| 6.2.2(Safety Relief Device) |
- |
0 |
|
- |
| 6.2.3(Safety Relief Device) |
- |
0 |
|
- |
| 6.3.1(Temperature Responsive Safety Relief Device) |
- |
0 |
|
- |
| 6.3.2(Temperature Responsive Safety Relief Device) |
- |
0 |
|
- |
| 6.3.3(Temperature Responsive Safety Relief Device) |
- |
0 |
|
- |
| 6.4.1(Handles and Knobs) |
- |
0 |
|
- |
| 6.4.1.1(Handles and Knobs) |
- |
0 |
|
- |
| 6.4.2(Handles and Knobs) |
- |
0 |
|
- |
| 6.4.2.1(Handles and Knobs) |
- |
0 |
|
- |
| 6.5(CONSTRUCTION) |
- |
0 |
|
- |
| 6.6(CONSTRUCTION) |
- |
0 |
|
- |
| 6.7(Internal Level Marking) |
- |
0 |
|
- |
| 6.8(Internal Level Marking) |
- |
0 |
|
- |
| 7.1(WORKMANSHIP AND FINISH) |
- |
0 |
|
- |
| 7.2(WORKMANSHIP AND FINISH) |
- |
0 |
|
- |
| 8.17(Test for Effectiveness for Induction Bottom) |
- |
0 |
|
- |
| 8.16(PRD with chain) |
- |
0 |
|
- |
| 8.15.4.2(Glass lid without rim) |
- |
0 |
|
- |
| 8.15.4.1("Free Fall Test ( Glass lid with rim)
") |
- |
0 |
|
- |
| 8.15.3(Thermal Shock Test on Tempered Glass lid) |
- |
0 |
|
- |
| 8.15.2(Ball Drop Test on Tempered Glass lid) |
- |
0 |
|
- |
| 8.15.1(Fragmentation Test on Tempered Glass lid) |
- |
0 |
|
- |
| 8.14(3 ply construction cooker body) |
- |
0 |
|
- |
| 8.13(Pressure cooker with integral electrical heating) |
- |
0 |
|
- |
| 8.12(Internal Coating) |
- |
0 |
|
- |
| 7.3(WORKMANSHIP AND FINISH) |
- |
0 |
|
- |
| 7.4(WORKMANSHIP AND FINISH) |
- |
0 |
|
- |
| 8.1(Air Pressure Test) |
- |
0 |
|
- |
| 8.2(Proof Pressure Test) |
- |
0 |
|
- |
| 8.3.1(Operating Test for Pressure Regulating Device) |
- |
0 |
|
- |
| 8.4.1(Test for Safety Relief Device) |
- |
0 |
|
- |
| 8.4.2(Test for Safety Relief Device) |
- |
0 |
|
- |
| 8.4.2 NOTE(Test for Safety Relief Device) |
- |
0 |
|
- |
| 8.5(Bursting Pressure Test) |
- |
0 |
|
- |
| 8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker) |
- |
0 |
|
- |
| 8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker) |
- |
0 |
|
- |
| 8.6.3(Tests for Removal of Lid under Pressure: For Cooker Fastened by Screw Clamps or Any Other Locking Device) |
- |
0 |
|
- |
| 8.6.4(Tests for Removal of Lid under Pressure in case of electrical pressure cooker) |
- |
0 |
|
- |
| 8.7(Test for Spring Loaded Mechanism) |
- |
0 |
|
- |
| 8.8(Test for stainless steel cookers) |
- |
0 |
|
- |
| 8.9("For stainless steel, aluminium induction
compatible base and 3 ply cooker") |
- |
0 |
|
- |
| 8.10(Testing of Handles of the cooker) |
- |
0 |
|
- |
| 8.10 Note 3(Testing of Handles of the cooker) |
- |
0 |
|
- |
| 8.10 Note 4(Testing of Handles of the cooker) |
- |
0 |
|
- |
| 8.10 Note 5(Testing of Handles of the cooker) |
- |
0 |
|
- |
| 8.10 Note 6(Testing of Handles of the cooker) |
- |
0 |
|
- |
| 8.10.1(Testing of Handles of the cooker) |
- |
0 |
|
- |
| 8.11.1(External Coating) |
- |
0 |
|
- |
|
28 Nov, 2028 |
-
- |
| 277 |
NATIONAL TEST HOUSE(SR), Chennai
| 6122704
| IS 13983 (1994) |
Stainless Steel Sinks For Domestic Purposes |
- |
14500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9(Marking) |
- |
0 |
|
- |
| 4(Type) |
- |
500 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Carbon Content) |
- |
500 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Silicon Content) |
- |
500 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Manganese Content) |
- |
500 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nickel Content) |
- |
500 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Chromium Content) |
- |
500 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Sulphur Content) |
- |
500 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Phouphorous Content) |
- |
1000 |
|
- |
| 6(Thickness of sheet/strip) |
- |
500 |
|
- |
| 6(Depth of bowl) |
- |
500 |
|
- |
| 6(Internal dimensions of the bowl) |
- |
500 |
|
- |
| 6(Bowl locating limits) |
- |
500 |
|
- |
| 6(Co-ordinating sizes) |
- |
500 |
|
- |
| 7.1(Consruction and workmanship) |
- |
500 |
|
- |
| 7.1.1(Consruction and workmanship) |
- |
500 |
|
- |
| 7.2(Consruction and workmanship) |
- |
500 |
|
- |
| 7.2.1(Consruction and workmanship) |
- |
500 |
|
- |
| 7.3(Drainers) |
- |
500 |
|
- |
| 7.4(Waste outlet) |
- |
500 |
|
- |
| 7.5(Tap holes) |
- |
500 |
|
- |
| 7.6(Overflows) |
- |
500 |
|
- |
| 8(Finish) |
- |
500 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304)(Nitrogen Content) |
- |
0 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Carbon Content) |
- |
0 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Silicon Content) |
- |
0 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Manganese Content) |
- |
0 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nickel Content) |
- |
0 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Chromium Content) |
- |
0 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Sulphur Content) |
- |
0 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Phouphorous Content) |
- |
0 |
|
- |
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302)(Nitrogen Content) |
- |
0 |
|
- |
| 5(MATERIALS) |
- |
0 |
|
- |
| 6.1.1(Thickness of Sheet/Strip) |
- |
0 |
|
- |
| 6.1.2(Thickness of Sheet/Strip) |
- |
0 |
|
- |
| 6.2(Depth of Bowls) |
- |
0 |
|
- |
| 6.3(Internal Dimensions of Bowls) |
- |
0 |
|
- |
| 6.4.1(Bowl Locating Limits) |
- |
0 |
|
- |
| 6.5(Coordinating Sizes) |
- |
0 |
|
- |
| 7.1(CONSTRUCTION AND WORKMANSHIP) |
- |
0 |
|
- |
| 7.1.1(CONSTRUCTION AND WORKMANSHIP) |
- |
0 |
|
- |
| 7.2.1(CONSTRUCTION AND WORKMANSHIP) |
- |
0 |
|
- |
| 7.3(CONSTRUCTION AND WORKMANSHIP) |
- |
0 |
|
- |
| 7.4(Waste Outlet) |
- |
0 |
|
- |
| 7.5(Tap Holes) |
- |
0 |
|
- |
| 7.6(OVERFLOW) |
- |
0 |
|
- |
| Clause no. 4(types) |
- |
0 |
|
- |
| Caluse no. 5("Material -Austenitic stainless steel of
Grade Designation") |
- |
3000 |
|
- |
| Clause no. 6.1(Thickness of sheet) |
- |
0 |
|
- |
| Clause no. 6.2(Depth of Bowls) |
- |
0 |
|
- |
| Clause no. 6.3(Internal dimensions of bowls) |
- |
0 |
|
- |
| Clause no. 6.4(Bowl Locating Limits) |
- |
0 |
|
- |
| Clause no. 6.5, Table No. 1(Dimension of the sink) |
- |
0 |
|
- |
| Clause no. 7(Construction and workmanship) |
- |
0 |
|
- |
| Clause no. 8(Finish) |
- |
0 |
|
- |
| Clause no. 9(Mark) |
- |
0 |
|
- |
|
28 Nov, 2028 |
-
- |
| 278 |
NATIONAL TEST HOUSE(SR), Chennai
| 6122704
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
- |
10500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Chemical Composition) |
- |
2500 |
|
Rs 4000/- with micro elements, Rs 2500/- without micro elements. |
| Cl 8(UTM) |
- |
3000 |
|
(i) Cl. 8.1, Tensile Test, Rs 3000 |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
2000 |
|
Included in complete test charges. |
| Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
3000 |
|
Additional charges not included in complete test charges. |
| Cl. 8.5
Table 5A, 5B & 5C(Plastic Strain Ratio
(r bar/r-90)) |
- |
3000 |
|
Additional charges not included in complete test charges. |
| Cl. 8.6
Table 5A, 5B & 5C(Tensile Strain Hardening Component
(n-Value)) |
- |
3000 |
|
Additional charges not included in complete test charges. |
| Cl. 8.7(Bake Hardening Index) |
- |
3000 |
|
Additional charges not included in complete test charges. |
| Cl 10(Workmanship) |
- |
1000 |
|
- |
| Cl 9(Workmanship) |
- |
4000 |
|
Additional charges (i) Cl. 9.3, Strain Ageing, Test Fee, Rs 3000.00, (ii) Cl. 9.5, Surface Finish, Test Fee, Rs 1000.00 |
| Cl. 9 Table 8(Surface roughness) |
- |
1000 |
|
- |
|
28 Nov, 2028 |
-
- |
| 279 |
NATIONAL TEST HOUSE(SR), Chennai
| 6122704
| IS 2062 (2011) |
Hot rolled medium and high tensile structural steel - Specification (Seventh Revision) |
- |
13000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 10.3(UTM) |
- |
3000 |
|
- |
| Cl 11.3(Press) |
- |
1000 |
|
- |
| Cl 15(Length, Width & Thickness) |
- |
1000 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
|
28 Nov, 2028 |
-
- |
| 280 |
NATIONAL TEST HOUSE(SR), Chennai
| 6122704
| IS 277 (2018) |
Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision) |
- |
5000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8.1(UTM) |
- |
3000 |
|
- |
| Cl 8.2(Press) |
- |
1000 |
|
- |
| Cl 14(Length, Width & Thickness) |
- |
1000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Single Spot Test) |
- |
1000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Triple Spot Test) |
- |
1000 |
|
- |
|
28 Nov, 2028 |
-
- |
| 281 |
NATIONAL TEST HOUSE(SR), Chennai
| 6122704
| IS 513 : Part 2 (2016) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
- |
8500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 9(Workmanship) |
- |
1000 |
|
- |
| Cl 7(UTM) |
- |
3000 |
|
- |
| Cl. 7.2 Table 7(Bend Test) |
- |
1000 |
|
- |
| Cl 10(Length, Width & Thickness) |
- |
1000 |
|
- |
| Cl. 7.3 Table 4A & 4B(Tensile Strain Hardening) |
- |
3000 |
|
Additional Charges |
| Cl. 8.5.3 Table 6(Surface Roughness) |
- |
1000 |
|
Additional Charges |
|
28 Nov, 2028 |
-
- |
| 282 |
NATIONAL TEST HOUSE(SR), Chennai
| 6122704
| IS/ISO 9994 (2018) |
Lighters Safety specifications First Revision |
- |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.2(Flame Height) |
- |
1800 |
|
- |
| Cl.4.3(Flame-Height adjustment) |
- |
600 |
|
- |
| Cl.4.4(Resistance to spitting or sputtering and flaring) |
- |
900 |
|
- |
| Cl.4.5(Flame Extinction) |
- |
1800 |
|
- |
| Cl.4.6(Volumetric displacement of Fuel) |
- |
1800 |
|
- |
| Cl.4.7(Mass of Fuel) |
- |
600 |
|
- |
| Cl.5.1(External Finish) |
- |
800 |
|
- |
| Cl.5.2(Compatibility of Fuel) |
- |
1000 |
|
- |
| Cl.5.3(Resistance to Fuel Loss) |
- |
600 |
|
- |
| Cl.5.4(Resistance to dropping) |
- |
1800 |
|
- |
| Cl.5.5(Resistance to elevated Temperature) |
- |
1800 |
|
- |
| Cl.5.6(Resistance to internal Pressure) |
- |
1800 |
|
- |
| Cl.5.7(Burning Behavior) |
- |
900 |
|
- |
| Cl.5.8(Resistance to cyclic burning) |
- |
900 |
|
- |
| Cl.5.9(Resistance to Continue Burning) |
- |
2000 |
|
- |
| Cl.4(Flame Generation) |
- |
900 |
|
- |
|
28 Nov, 2028 |
-
- |
| 283 |
NATIONAL TEST HOUSE(SR), Chennai
| 6122704
| IS/ISO 22702 (2018) |
Utility lighters Safety specifications First Revision |
- |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Flame generation) |
- |
500 |
|
- |
| 4.2(Flame heights) |
- |
900 |
|
- |
| 4.3(Flame- height adjustment) |
- |
400 |
|
- |
| 4.4("Resistance to Spitting or
Sputtering and flaring") |
- |
1800 |
|
- |
| 4.5(Flame extinction) |
- |
1800 |
|
- |
| 4.6(Volumetric Displacement) |
- |
1800 |
|
- |
| 5.2(Resistance to dropping) |
- |
1800 |
|
- |
| 5.3(Resistance to elevated temperature) |
- |
1800 |
|
- |
| 5.4(Burning behavior) |
- |
900 |
|
- |
| 5.5(Resistance to continuous burn) |
- |
2000 |
|
- |
| 5.6(Resistance to cyclic burn) |
- |
1800 |
|
- |
| 5.7(External Finish) |
- |
0 |
|
- |
| 5.8(Compatibility with fuel) |
- |
1800 |
|
- |
| 5.9(Resistance to internal pressure) |
- |
1800 |
|
- |
| 6(Refilling Test) |
- |
900 |
|
- |
|
28 Nov, 2028 |
-
- |
| 284 |
NATIONAL TEST HOUSE(SR), Chennai
| 6122704
| IS 1660 (2009) |
Wrought aluminium utensils - Specification (First Revision) |
- |
31100 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Classification Heavy/Medium/L:ight) |
- |
500 |
|
- |
| 4(Material) |
- |
3000 |
|
- |
| 0.5(Fabrication) |
- |
0 |
|
- |
| 5.1(The utensil shall be pressed or spun from one piece) |
- |
200 |
|
- |
| 5.2( Body Thickness of the thinnest part of the finished utensil, mm Not declared ) |
- |
500 |
|
- |
| 5.2(Lid Thickness of the finished utensil, mm) |
- |
500 |
|
- |
| 6.1 & Table 1( i) Name of Utensil ) |
- |
0 |
|
- |
| 6.1 & Table 1(ii) Shape of Utensil) |
- |
0 |
|
- |
| 6.1 & Table 1( Nominal Size, mm) |
- |
200 |
|
- |
| 6.1 & Table 1(Inside dia, Φ D mm Not declared ) |
- |
200 |
|
- |
| 6.1 & Table 1(Outside dia Ф NA) |
- |
200 |
|
- |
| 6.1 & Table 1(Height NA) |
- |
200 |
|
- |
| 6.1 & Table 1(Capacity, l NA) |
- |
500 |
|
- |
| 6.1( Minimum sheet thickness for nominal size ) |
- |
500 |
|
- |
| 7.1(HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use ) |
- |
200 |
|
- |
| 7.2(Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil) |
- |
500 |
|
- |
| 8.1(The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects) |
- |
200 |
|
- |
| 8.2(The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt) |
- |
200 |
|
- |
| 8.4.1.2( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.) |
- |
500 |
|
- |
| 8.4.2(A coating of thickness 25 to 100 microns is generally required) |
- |
2500 |
|
- |
| 8.4.3(Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface) |
- |
500 |
|
- |
| 8.4.4(The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. ) |
- |
0 |
|
- |
| 8.4.4(The film will appear dark grey when wet. ) |
- |
0 |
|
- |
| 8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible) |
- |
500 |
|
- |
| 9(The manufacturer shall provide full instructions for use and cleaning for coated or hard anodized utensils) |
- |
0 |
|
- |
| 10(Each vessel shall be legibly and indelibly stamped on the outside surface or handle with the manufacturer’s name or registered trade-mark, size and thickness or class. ) |
- |
0 |
|
- |
| Clause 3.1.3, Table 2(Minimum Thickness at the bottom) |
- |
500 |
|
- |
| Clause 3.1.3, Table 2(Minimum Thickness of wall at top edge) |
- |
500 |
|
- |
| Clause 3.1.3, Table 2(Minimum Cover Thickness) |
- |
500 |
|
- |
| Clause 8.6.1(Performance test) |
- |
2000 |
|
- |
| Clause 8.6.2(Ground Nut Oil Test for Leakage) |
- |
2000 |
|
- |
| 5.4(Qualitative and Anodized Coating) |
- |
2000 |
|
- |
| 5.5(Qualitative and Anodized Coating) |
- |
2000 |
|
- |
| 8.3(Anodized Coating) |
- |
2000 |
|
- |
| 8.5(Plastic Coating) |
- |
8000 |
|
- |
|
28 Nov, 2028 |
-
- |
| 285 |
National Test House (WR) - NTH, Mumbai
| 7107604
| IS 3601 (2006) |
Steel tubes for mechanical and general engineering purposes - Specification (Second Revision) |
ALL TYPE GRADE |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Material) |
- |
2500 |
|
- |
| 13(Mechanical Testing) |
- |
3000 |
|
- |
| 6.0(Workmanship) |
- |
1000 |
|
- |
| 4.1(Sulphur-Percentage by mass) |
- |
500 |
|
- |
| 4.1(Phosphorus-Percentage by mass) |
- |
500 |
|
- |
| 8.0(Straightness) |
- |
1000 |
|
- |
| 19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia) |
- |
1000 |
|
- |
| 19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness) |
- |
1000 |
|
- |
| 11.1(Surface Protection) |
- |
1000 |
|
- |
| 11.2(Surface Protection) |
- |
1000 |
|
- |
| 13.1.3(Tensile Strength) |
- |
1000 |
|
- |
| 13.1.1(Yield Stress) |
- |
1000 |
|
- |
| 13.1.2(Elongation) |
- |
1000 |
|
- |
| 13.2(Flattening Test) |
- |
1500 |
|
- |
| 13.3(Bend Test (Strip)) |
- |
1500 |
|
- |
| 13.4(Bend Test (Whole Tube)) |
- |
1500 |
|
- |
| 13.5(Drift Expansion Test) |
- |
1500 |
|
- |
| 13.6(Crush Test) |
- |
1500 |
|
- |
| 19.1.3(Height of Internal Fin) |
- |
1000 |
|
- |
| 6.0(Workmanship) |
- |
1000 |
|
- |
| 4.1(Sulphur-Percentage by mass) |
- |
500 |
|
- |
| 4.1(Phosphorus-Percentage by mass) |
- |
500 |
|
- |
| 8.0(Straightness) |
- |
1000 |
|
- |
| 19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia) |
- |
1000 |
|
- |
| 19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness) |
- |
1000 |
|
- |
| 11.1(Surface Protection) |
- |
1000 |
|
- |
| 11.2(Surface Protection) |
- |
1000 |
|
- |
| 13.1.3(Tensile Strength) |
- |
1000 |
|
- |
| 13.1.1(Yield Stress) |
- |
1000 |
|
- |
| 13.1.2(Elongation) |
- |
1000 |
|
- |
| 13.2(Flattening Test) |
- |
1500 |
|
- |
| 13.3(Bend Test (Strip)) |
- |
1500 |
|
- |
| 13.4(Bend Test (Whole Tube)) |
- |
1500 |
|
- |
| 13.5(Drift Expansion Test) |
- |
1500 |
|
- |
| 13.6(Crush Test) |
- |
1500 |
|
- |
| 19.1.3(Height of Internal Fin) |
- |
1500 |
|
- |
| Cl. 10 Annex B Cl. 17, Cl. 19(Moment of inertia) |
- |
1000 |
|
- |
| Cl. 10 Annex B Cl. 17, Cl. 19(Radius of gyration) |
- |
1000 |
|
- |
| Cl. 10 Annex B Cl. 17, Cl. 19(Modulus of section) |
- |
1000 |
|
- |
| Cl. 10 Annex B Cl. 17, Cl. 19(Area of cross section) |
- |
1000 |
|
- |
| Cl. 19.1.3(Internal Fin Height) |
- |
1000 |
|
- |
| Cl. 10 Annex B Cl. 17, Cl. 19(Mass) |
- |
1000 |
|
- |
| Cl. 9(Length) |
- |
1000 |
|
- |
| 4.0 (a)(Carbon as C - IS:8811) |
- |
500 |
|
- |
| 4.0 (b)(Manganese as Mn - IS:8811) |
- |
500 |
|
- |
| 4.0 (b)(Manganese as Mn - IS:8811) |
- |
500 |
|
- |
| 4.0 (c)(Micro Alloying elements (Nb+V+Ti)) |
- |
500 |
|
- |
| 4.0 (f)(Nitrogen content) |
- |
500 |
|
- |
| 9(Length -SOP MT-23) |
- |
1000 |
|
- |
| 10(Outside diameter-SOP MT-23) |
- |
1000 |
|
- |
| 10(Thickness - SOP MT-23) |
- |
1000 |
|
- |
| 10(Mass of Tube-SOP MT-23) |
- |
1000 |
|
- |
| 10(Area of Cross Section) |
- |
1000 |
|
- |
| 16(Marking) |
- |
0 |
|
- |
| CL 10("1.Outer dia (04)
2.Thickness (08)") |
- |
1000 |
|
- |
| CL 10(Minimum Outer dia (04)) |
- |
1000 |
|
- |
| CL 10(Maximum Outer dia (04)) |
- |
1000 |
|
- |
| Cl-10("
Minimum Thickness (08)") |
- |
1000 |
|
- |
| CL 10(Maximum Thickness (08)) |
- |
1000 |
|
- |
|
- |
-
- |
| 286 |
National Test House (WR) - NTH, Mumbai
| 7107604
| IS 6603 (2024) |
Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars â Specification (Second Revision) |
All Grades |
29000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl - 9.1,9.5,13.2(Thickness or Diameter) |
- |
1000 |
|
- |
| Cl - 9.1,9.5,13.2(Proof Strength Rp 0.2 MP) |
- |
1000 |
|
- |
| Cl - 9.1,9.5,13.2(Proof Strength Rp 1.0 MP) |
- |
1000 |
|
- |
| Cl - 9.1,9.5,13.2(Tensile Strength) |
- |
1000 |
|
- |
| Cl - 9.1,9.5,13.2(Elongation After Fracture Long.) |
- |
1000 |
|
- |
| Cl - 9.1,9.5,13.2(Elongation After Fracture Tr.) |
- |
1000 |
|
- |
| Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Long.) |
- |
5000 |
|
- |
| Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Tr.) |
- |
5000 |
|
- |
| Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Delivery Condition) |
- |
10000 |
|
- |
| Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Sensitized Condition) |
- |
10000 |
|
- |
| Cl - 9.1,9.5,13.2(Hardness) |
- |
1500 |
|
- |
| Cl - 9.1,9.5,13.2(Elongation After Fracture) |
- |
1000 |
|
- |
| Cl - 9.1,9.5,13.2(Impact Energy (ISO-V)) |
- |
5000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter) |
- |
1000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed)) |
- |
1000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed)) |
- |
1500 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered)) |
- |
2500 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered)) |
- |
1000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered)) |
- |
1000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered)) |
- |
1000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered)) |
- |
1000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered)) |
- |
1000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered)) |
- |
1000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter) |
- |
1000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed)) |
- |
1000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed)) |
- |
1500 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered)) |
- |
2500 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered)) |
- |
1000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered)) |
- |
1000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered)) |
- |
1000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered)) |
- |
1000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered)) |
- |
1000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered)) |
- |
1000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 450 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 500 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 550 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 100 Deg. C.) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 150 Deg. C.) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 200 Deg. C.) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 250 Deg. C.) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 300 Deg. C.) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 350 Deg. C.) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 400 Deg. C.) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 450 Deg. C.) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 550 Deg. C.) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C) |
- |
2000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C) |
- |
2000 |
|
- |
| Cl-7.1, 7.2(C) |
- |
500 |
|
- |
| Cl-7.1, 7.2(Si) |
- |
500 |
|
- |
| Cl-7.1, 7.2(Mn) |
- |
500 |
|
- |
| Cl-7.1, 7.2(P) |
- |
500 |
|
- |
| Cl-7.1, 7.2(S) |
- |
500 |
|
- |
| Cl-7.1, 7.2(Cr) |
- |
500 |
|
- |
| Cl-7.1, 7.2(Mo) |
- |
500 |
|
- |
| Cl-7.1, 7.2(Ni) |
- |
500 |
|
- |
| Cl-7.1, 7.2(N) |
- |
500 |
|
- |
| Cl-7.1, 7.2(Cu) |
- |
500 |
|
- |
| Cl-7.1, 7.2(Ti) |
- |
500 |
|
- |
| Cl-7.1, 7.2(W) |
- |
500 |
|
- |
| Cl-7.1, 7.2(Nb) |
- |
500 |
|
- |
| cL-7.1, 7.2(Co) |
- |
500 |
|
- |
| Cl-7.1, 7.2(Ti: (C + N)) |
- |
500 |
|
- |
| Cl-7.1, 7.2(V) |
- |
500 |
|
- |
| Cl-7.1, 7.2(Al) |
- |
500 |
|
- |
| Cl-7.1, 7.2(Boron) |
- |
500 |
|
- |
| Cl-7.1, 7.2(Tungsten) |
- |
500 |
|
- |
| Cl. 7.1, 7.2, 7.3 & 13.1 Table 1((Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.)) |
- |
500 |
|
- |
| Cl 6((freedom from defects)) |
- |
1000 |
|
- |
| Cl. 12((dimension and tolerance)) |
- |
1000 |
|
- |
| Cl. 14((corrosion resistance)) |
- |
10000 |
|
- |
|
- |
-
- |
| 287 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 14543 (2016) |
Packaged drinking water (Other Than Packaged Natural Mineral Water) - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.2.7 (Yeast and Mould) |
- |
|
|
|
| 5.3 Table-3 vi (Chromium (as Cr)) |
- |
|
|
|
|
- |
-
- |
| 288 |
Matrix Test Labs
| 8138626
| IS 16046 : Part 2 (2018) |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision ) |
- |
200000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(General Safety Considerations) |
- |
5000 |
|
10% discount to BIS |
| 6(Type Test and Sample Size) |
- |
5000 |
|
10% discount to BIS |
| 7.1(Charging procedure for test purposes) |
- |
20000 |
|
10% discount to BIS |
| 7.2(Intended Use) |
- |
35000 |
|
10% discount to BIS |
| 7.3(Reasonably foreseeable misuse) |
- |
110000 |
|
10% discount to BIS |
| 10(Packaging) |
- |
500 |
|
- |
| 8.2(Small Cell and battery safety information) |
- |
5000 |
|
10% discount to BIS |
| 5.8(Battery Safety Components) |
- |
15000 |
|
10% discount to BIS |
| 9(Marking) |
- |
3000 |
|
10% discount to BIS |
| 9.1(Cell Marking) |
- |
3000 |
|
10% discount to BIS |
| 5.2(Insulation and Wiring) |
- |
5000 |
|
10% discount to BIS |
| 5.3(Venting) |
- |
1000 |
|
10% discount to BIS |
| 5.4(Temperature, Voltage and Current Management) |
- |
1000 |
|
10% discount to BIS |
| 5.5(Terminal Contacts) |
- |
1000 |
|
10% discount to BIS |
| 5.6(Assembly of Cells into batteries) |
- |
1000 |
|
10% discount to BIS |
| 5.7(Quality Plan) |
- |
1000 |
|
10% discount to BIS |
| 4(Parameter Measurement Tolerances) |
- |
500 |
|
10% discount to BIS |
| 5.1(General) |
- |
1000 |
|
10% discount to BIS |
| 8(Information for safety) |
- |
5000 |
|
10% discount to BIS |
| 9.2(Battery Marking) |
- |
3000 |
|
10% discount to BIS |
| 9.3(Caution for ingestion of small cells and batteries) |
- |
1000 |
|
10% discount to BIS |
| 9.4(Other information) |
- |
500 |
|
10% discount to BIS |
| clause 7.3.1 of IS 16047: Part 3(Discharge performance at 20 °C (rated capacity)) |
- |
20000 |
|
10% discount to BIS |
|
31 Dec, 2026 |
-
- |
| 289 |
Samridhi Test House Pvt. Ltd.
| 8184706
| IS 9573 : Part 2 (2017) |
Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 2 domestic and commercial application (Fourth Revision) |
- |
10900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.1(General) |
- |
200 |
|
- |
| Clause 4.2(Material) |
- |
300 |
|
- |
| Clause 4.2.1(Lining) |
- |
200 |
|
- |
| Clause 4.2.2 (a)(Reinforcement) |
- |
200 |
|
- |
| Clause 4.2.2 (b)(Reinforcement) |
- |
200 |
|
- |
| Clause 4.2.3(Cover) |
- |
300 |
|
- |
| Clause 4.3
Sub Clause 4.3.1
Table 1(Bore Size) |
- |
200 |
|
- |
| Clause 4.3
Sub Clause 4.3.2 (a)(Thickness of Lining and Cover) |
- |
300 |
|
- |
| Clause 4.3
Sub Clause 4.3.2 (b)(Thickness of Lining and Cover) |
- |
300 |
|
- |
| Clause 4.3
Sub Clause 4.3.3(Length) |
- |
300 |
|
- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (i) (a)(Tensile Strength- Lining) |
- |
400 |
|
- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (i) (b)(Tensile Strength- cover) |
- |
350 |
|
- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (ii) (a)(Elongation at break- Lining) |
- |
400 |
|
- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (ii) (b)(Elongation at break- Cover) |
- |
300 |
|
- |
| Clause 4.4
Sub Clause 4.4.2
(a)(Accelerated Ageing Test lining) |
- |
400 |
|
- |
| Clause 4.4
Sub Clause 4.4.2
(b)(Accelerated Ageing Test lining) |
- |
350 |
|
- |
| Clause 4.4
Sub Clause 4.4.2
(a)(Accelerated Ageing Test cover) |
- |
350 |
|
- |
| Clause 4.4
Sub Clause 4.4.2
(b)(Accelerated Ageing Test cover) |
- |
350 |
|
- |
| Clause 4.4
Sub Clause 4.4.3
(a)(Resistance of Lining to n-pentane) |
- |
500 |
|
- |
| Clause 4.4
Sub Clause 4.4.3
(b)(Resistance of Lining to n-pentane) |
- |
500 |
|
- |
| Clause 4.5
Sub clause 4.5.1(Adhesion) |
- |
300 |
|
- |
| Clause 4.5
Sub clause 4.5.2(Low Temperature Flexibility) |
- |
400 |
|
- |
| Clause 4.5
Sub clause 4.5.3(Flexibility of Hose) |
- |
350 |
|
- |
| Clause 4.5
Sub clause 4.5.4(Ozone Resistance) |
- |
1000 |
|
- |
| Clause 4.5
Sub clause 4.5.5
4.5.5.1(Proof pressure test) |
- |
350 |
|
- |
| Clause 4.5
Sub clause 4.5.5
4.5.5.2(Bursting pressure) |
- |
350 |
|
- |
| Clause 4.5
Sub clause 4.5.6(Grip Strength Test) |
- |
400 |
|
- |
| Clause 4.5
Sub clause 4.5.7(Burning Behaviour) |
- |
300 |
|
- |
| Clause 5.2
(a)(Marking
Manufacturer’s name or trade-mark, if any
) |
- |
100 |
|
- |
| Clause 5.2
(b)(Marking
Words LPG, Max W.P. 1.0 MPa;
) |
- |
100 |
|
- |
| Clause 5.2
(c)(Marking
Nominal bore, 1000111) |
- |
100 |
|
- |
| Clause 5.2
(d)(Marking
Batch/Lot No.
) |
- |
100 |
|
- |
| Clause 5.2
(e)(Marking
Month and year of manufacture
) |
- |
100 |
|
- |
| Clause 5.2
(f)(Marking
IS 9573 (Part 2)
) |
- |
100 |
|
- |
| Clause 5.2
(f)(Marking
ecommended to replace before (MONTH/YEAR)
) |
- |
100 |
|
- |
| Clause 5.2.1(BIS Certification Marking
) |
- |
100 |
|
- |
|
- |
-
- |
| 290 |
Samridhi Test House Pvt. Ltd.
| 8184706
| IS 2167 (2025) |
Commercial Beverage Coolers - Specification (ISO 22044 : 2021, MOD) (Fourth Revision) |
- |
180000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.5.1(Classification According To Temperature) |
- |
2000 |
|
- |
| Cl.5.2(Construction) |
- |
2000 |
|
- |
| Cl.6.2.2(Seal Test For Door And Lids) |
- |
5000 |
|
- |
| Cl.6.2.3(Test On Durability Of Door And Lid) |
- |
5000 |
|
- |
| Cl.6.2.4(Linear Dimensions, Areas And Volumes) |
- |
8000 |
|
- |
| Cl.6.3.11.2(Temperature Test) |
- |
8000 |
|
- |
| Cl.6.3.11.3(Half Load Recovery Test) |
- |
10000 |
|
- |
| Cl.6.3.11.3.6(Energy Consumption test) |
- |
11999.99 |
|
- |
| Cl.6.3.12(Water Vapour Condensation Test) |
- |
10000 |
|
- |
| Cl.6.3.13(Specific Energy Consumption (SEC)) |
- |
2000 |
|
- |
| Cl.6.3.14 and Annex G(Lighting Test) |
- |
5000 |
|
- |
| Cl.7(Marking) |
- |
1000 |
|
- |
| Annex B(Net Volume Calculation) |
- |
3000 |
|
- |
| Annex C(Equivalent Volume Calculation) |
- |
2999.98 |
|
- |
| Annex D(Tda Calculation) |
- |
3000 |
|
- |
| Annex E(Tests For Absence Of Odour And Taste) |
- |
5000 |
|
- |
| 5.1(Classification according to temperature) |
- |
5000 |
|
- |
| 5.2(Construction) |
- |
3000 |
|
- |
| 5.2,5.2.1(General) |
- |
999.99 |
|
- |
| 5.2,5.2.2(Materials) |
- |
1000 |
|
- |
| 5.2,5.2.3(Thermal insulation) |
- |
999.99 |
|
- |
| 5.2,5.2.4(Refrigerating system) |
- |
1000 |
|
- |
| 5.2,5.2.5(Electrical components) |
- |
1000 |
|
- |
| 6.1(General) |
- |
1000 |
|
- |
| 6.2.1,Aneex E(Absence of odour and taste (not compulsory)) |
- |
5000 |
|
- |
| 6.2.2(Seal test for doors and lids) |
- |
2500 |
|
- |
| 6.2.3(Test on durability of door and lid) |
- |
2500 |
|
- |
| 6.2.4(Linear dimensions, areas and volumes) |
- |
2499.98 |
|
- |
| 6.3.2(Test room condition) |
- |
1000 |
|
- |
| 6.3.3(M-can) |
- |
1000 |
|
- |
| 6.3.4(Preparation of test commercial beverage cooler and general test procedures) |
- |
2000 |
|
- |
| 6.3.5(Loading the commercial beverage cooler) |
- |
2000 |
|
- |
| 6.3.7(Stable conditions) |
- |
1000 |
|
- |
| 6.3.8(Lighting and night-covers) |
- |
2000 |
|
- |
| 6.3.9(Power supply) |
- |
2000 |
|
- |
| 6.3.10(Testing several commercial beverage coolers in the same room) |
- |
3500 |
|
- |
| 6.3.11.2(Temperature test) |
- |
7000 |
|
- |
| 6.3.11.3(Half reload recovery test) |
- |
10000 |
|
- |
| 6.3.11.3.6(Energy consumption test) |
- |
10000 |
|
- |
| 6.3.12(Water vapour condensation test) |
- |
10000 |
|
- |
| 6.3.13(Calculation of specific energy consumption (SEC)) |
- |
10000 |
|
- |
| 6.3.14(Lighting test) |
- |
10000 |
|
- |
| 7.2(Marking plate) |
- |
1000 |
|
- |
| Annex B(Net volume calculation) |
- |
2999.99 |
|
- |
| Annex C(Equivalent volume calculation) |
- |
3000 |
|
- |
| Annex D(Total display area (TDA)) |
- |
3000 |
|
- |
| 6.3.6(Running in period) |
- |
1000 |
|
- |
|
- |
-
- |
| 291 |
BIS, Patna Branch Laboratory (PBL)
| None
| IS 1239 : Part 1 (2004) |
Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 12 AND AS PER IS 4736 (UNIFORMITY OF ZINC COATING) |
- |
|
|
|
| 12 AND AS PER IS 4736 (MASS OF ZINC COATING) |
- |
|
|
|
| 6.2 AND AS PER IS 513 (NITROGEN) |
- |
|
|
|
| 6.2 AND AS PER IS 513 (ALUMINIUM) |
- |
|
|
|
| 6.2 AND AS PER IS 513 (MICRO ALLOY) |
- |
|
|
|
| 6.2 AND AS PER IS 513 (SILICON) |
- |
|
|
|
| 6.2 AND AS PER IS 513 (MANGANESE) |
- |
|
|
|
| 6.2 AND AS PER IS 513 (PHOSPHORUS) |
- |
|
|
|
| 6.2 AND AS PER IS 513 (SULPHUR) |
- |
|
|
|
| 6.2 AND AS PER IS 513 (CARBON) |
- |
|
|
|
| 6.2 AND AS PER IS 10748 (CARBON EQUIVALENT) |
- |
|
|
|
| Cl. 15 (Workmanship) |
- |
|
|
|
| Cl. 14.3 (Flattening test (Over 50 mm NB)) |
- |
|
|
|
| Cl. 14.2 (Bend Test (uto and including 50 mm NB)) |
- |
|
|
|
| Cl. 14.1.1 (Elongation) |
- |
|
|
|
| Cl. 14.1 (Tensile Strength) |
- |
|
|
|
| Cl. 3.3, 10.2 (Plain End) |
- |
|
|
|
| Clause 11.2 (Exact Length) |
- |
|
|
|
| Clause 11.1 (Random Length) |
- |
|
|
|
| Cl. 8, 9 Table 3,4 & 5 (Mass of Tube) |
- |
|
|
|
| Cl. 6.5 (Height of Internal Fin) |
- |
|
|
|
| Clause 8.1 (Table3,4,5) (Nominal Bore ) |
- |
|
|
|
| Cl. 8, 9 Table 3,4 & 5 (Thickness) |
- |
|
|
|
| Cl. 8 Table 3,4 & 5 (Outside Diameter) |
- |
|
|
|
| Clause 11.3 (Approximate Length) |
- |
|
|
|
| 17 (Marking) |
- |
|
|
|
|
- |
-
ll test facilities are available as per the IS except- i. Hydrostatic Test (Clause 13) Note: Sample size of 3m full length (two samples each of preferred size 1.5 m) may be supplied for testing. *- The exact sample type, size and quantity may be ascertained from the latest product manual issued by BIS. |
| 292 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 16984 (2024) |
Coated Folding Box Board for General Consumer Product Packaging â Specification (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (General) |
- |
|
|
|
| 5.2 (Squareness) |
- |
|
|
|
| 5.4 (Dimensions) |
- |
|
|
|
| 5.5 (Size) |
- |
|
|
|
| 5.6 (Print Resistance and Ink Adhesion of Printed Cartons) |
- |
|
|
|
| 5.8 (Strength) |
- |
|
|
|
|
- |
-
Partial; Chem(except OBA (optical brightening agent), Anthraquinone, Dioxins and Furans,Pentachlorophenol (PCP), Polychlorinated biphenyls); Mech(except Cl 5.9 table 1 bulk, Cobb, Brightness, Gloss, IGT Dry Pick, Roughness. Cl 5.7 Stiffness |
| 293 |
Gravitas Laboratories Private Limited, Greater Noida
| 8182606
| IS 10773 (2025) |
Wrought copper tubes for refrigeration and air-conditioning purposes Specification (Second Revision) |
All Grade |
36500 View breakup
₹9,000 for the Chemical Test, ₹9,000 for the Mechanical Test, Microscopic Examination: ₹4,500, Hydrogen Embrittlement: ₹5,000, Oxygen reporting (for applicable grades): ₹9,000.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause. No.5.0(Chemical composition) |
- |
9000 |
|
- |
| Clause. No.5.0(Copper + Silver) |
- |
9000 |
|
- |
| Clause. No.5.0(phophrous) |
- |
9000 |
|
- |
| Clause. No.5.0(Oxygen) |
- |
0 |
|
9000/grade where applicable. |
| Clause no.6.0(Manufacturer) |
- |
0 |
|
- |
| Clause no.7.0(Freedom from defects) |
- |
9000 |
|
- |
| Clause no.8.0(Mechnical and properties.) |
- |
9000 |
|
- |
| Clause no.9.0(Dimension and tolerance.) |
- |
9000 |
|
- |
| Clause no.10(Non destructive test.) |
- |
0 |
|
- |
| Clause.no.11.0(Residue test or Cleanliness test.) |
- |
9000 |
|
- |
| Clause.no.11.0(Marking) |
- |
0 |
|
- |
| Clause no.10.4(Microscopic Examination) |
- |
0 |
|
4500/- |
| Clause no.10.5(Hydrogen Embrittlement Test) |
- |
0 |
|
5000/- |
|
- |
-
Exclusion : Cl.10.1 Eddy Current Test, Cl.10.2 Hydrostatic Test, and Cl.10.3 Pneumatic Test |
| 294 |
QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED
| 5197006
| IS 2062 (Part 1) (2025) |
Structural Steel - Part 1 - Hot Rolled Medium and High tensile Steel |
Hot Rolled Medium & High Tensile |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-6(MANUFACTURE) |
- |
1000 |
|
- |
| Cl-7(FREEDOM FROM DEFECTS) |
- |
1000 |
|
- |
| Cl-8.1(Ladle Analysis) |
- |
1000 |
|
- |
| Cl-8.1 & 8.2, Table-1(Ladle Analysis-C) |
- |
1000 |
|
- |
| Cl-8.1 & 8.2, Table-1(Ladle Analysis- Mn) |
- |
1000 |
|
- |
| Cl-8.1 & 8.2, Table-1(Ladle Analysis- S) |
- |
1000 |
|
- |
| Cl-8.1 & 8.2, Table-1(Ladle Analysis- P) |
- |
1000 |
|
- |
| Cl-8.1 & 8.2, Table-1(Ladle Analysis- Si ) |
- |
1000 |
|
- |
| Cl-8.1 & 8.2, Table-1(Carbon Equivalen t (CE), Max) |
- |
1000 |
|
- |
| Cl-8.1 & 8.2, Note-1(Total aluminium) |
- |
1000 |
|
- |
| Cl-8.1 & 8.2, Note-5(Nb) |
- |
1000 |
|
- |
| Cl-8.1 & 8.2, Note-5(V) |
- |
1000 |
|
- |
| Cl-8.1 & 8.2, Note-5(Ti) |
- |
1000 |
|
- |
| Cl-8.1 & 8.2, Note-6(B) |
- |
1000 |
|
- |
| Cl-8.2, Table 2 (i)(Carbon) |
- |
1000 |
|
- |
| Cl-8.2, Table 2 (ii)(Manganese) |
- |
1000 |
|
- |
| Cl-8.2, Table 2 (iii)(Sulphur) |
- |
1000 |
|
- |
| Cl-8.2, Table 2 (iv)(Phosphorus) |
- |
1000 |
|
- |
| Cl-8.2, Table 2 (v)(Silicon) |
- |
1000 |
|
- |
| Cl-8.2, Table 2 (vi)(Copper) |
- |
1000 |
|
- |
| Cl-8.2, Table 2 (vii)(Vanadium) |
- |
1000 |
|
- |
| Cl-8.2, Table 2 (viii)(Niobium) |
- |
1000 |
|
- |
| Cl-8.2, Table 2 (ix)(Titanium) |
- |
1000 |
|
- |
| Cl-8.2, Table 2 (x)(Nitrogen) |
- |
1000 |
|
- |
| Cl-10.1(Number of Tensile Tests) |
- |
1000 |
|
- |
| Cl-10.2(Tensile Test Pieces) |
- |
1000 |
|
- |
| Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Tensile Strength Rm, Min MPa7) |
- |
1000 |
|
- |
| Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Yield Stress ReH, Min MPa7) |
- |
1000 |
|
- |
| Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Percentage Elongation A, Min at Gauge Length, L0=5.65√So) |
- |
1000 |
|
- |
| Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Internal Bend Diameter Max) |
- |
1000 |
|
- |
| Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Charpy Impact Test-Temp°C) |
- |
1000 |
|
- |
| Cl-10.3, 10.3.1, 11.3.1, 12.2, 12.4 & 12.5, Table-3(Charpy Impact Test- Min J) |
- |
1000 |
|
- |
| Cl-11.1(Number of Bend Tests) |
- |
1000 |
|
- |
| Cl-11.2(Bend Test Piece) |
- |
1000 |
|
- |
| Cl-11.3(Bend Test ) |
- |
1000 |
|
- |
| Cl-12(Impact Test ) |
- |
1000 |
|
- |
| Cl-14, Table-4 (i)(Beam, column, channel and angle sections
including parallel beam and column sections) |
- |
1000 |
|
- |
| Cl-14, Table-4 (ii)(Tee bars) |
- |
1000 |
|
- |
| Cl-14, Table-4 (iii)(Bulb angles) |
- |
1000 |
|
- |
| Cl-14, Table-4 (iv)(Plates, sheets, strips and flats) |
- |
1000 |
|
- |
| Cl-14, Table-4 (vi)(Round and square bars) |
- |
1000 |
|
- |
| Cl-14, Table-4 (vii)(Bulb flats) |
- |
1000 |
|
- |
| Cl-14, Table-4 (viii)(Sheet piling sections) |
- |
1000 |
|
- |
| Cl-14, Table-4 (ix)(Channel sections) |
- |
1000 |
|
- |
| Cl-13(Other TestsNondestructive testing, Metallurgical
tests
) |
- |
1000 |
|
- |
| Cl-13.3(Strength of joint ) |
- |
1000 |
|
- |
| Cl-15(Tolerances) |
- |
1000 |
|
- |
| Cl-16.1(Retests) |
- |
1000 |
|
- |
| Cl-16.2(Re-heat Treatment) |
- |
1000 |
|
- |
|
- |
-
Included w.e.f 19.05.2026 |
| 295 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 2593 (2023) |
Flexible Cables for Miners' Cap Lamps - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 3 (Conductor) |
- |
|
|
|
| Clause 3.1.2 (resistance of conductor) |
- |
|
|
|
| Clause 4 (Insulation) |
- |
|
|
|
| Clause 5 (Center Strain cord) |
- |
|
|
|
| Clause 6 (Sheath) |
- |
|
|
|
| Clause 7 (Nominal cross-sectional area of conductor) |
- |
|
|
|
| Clause 8.1 (Thickness of Insulation) |
- |
|
|
|
| Clasue -9 (Identification of Cores) |
- |
|
|
|
| Clause 10 (Laying Up) |
- |
|
|
|
| Clasue -11.2 (Thickness of Sheath) |
- |
|
|
|
| Clause 12 (overall diameter) |
- |
|
|
|
| Clause 13.1 (b) (Annealing test) |
- |
|
|
|
| Clause 13.1 (c) (Conductor resistance test) |
- |
|
|
|
| Clause 13.1 (d) (Test for thickness of insulation and sheath) |
- |
|
|
|
| Clause 13.1 (e) (1) (Tensile strength and elongation at break) |
- |
|
|
|
| Clause 13.1 (e) (2) (Ageing in air oven) |
- |
|
|
|
| Clause 13.1 (e) (3) (Ageing in oxygen bomb (for insulation)/air bomb (for sheath) |
- |
|
|
|
| Clause 13.1 (e) (4) (Oil resistance test) |
- |
|
|
|
| Clause 14.1 (Voltage Test) |
- |
|
|
|
| Clause 14.2 (Flammability Test) |
- |
|
|
|
| Clause 14.3.1 (Test for Breaking Load) |
- |
|
|
|
| Clause 14.4 (Checking of Overall Diameter) |
- |
|
|
|
| Clause 15 (Manufacturer) |
- |
|
|
|
| Clause 16 (Marking) |
- |
|
|
|
|
- |
-
Complete for electrical parameters |
| 296 |
BIS, Central Laboratory (CL)
| None
| IS 1363 : Part 1 (2023) |
Hexagon head bolts, screws and nuts of product grade C Part 1 Hexagon head bolts (Size range M5 to M64) (sixth revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Dimensions) |
- |
|
|
|
| 5 - Table 5 (i) (General requirements) |
- |
|
|
|
| 5 - Table 5 (ii) (Thread) |
- |
|
|
|
| 5 - Table 5 (iii) (Mechanical properties) |
- |
|
|
|
| 5 - Table 5 (v) (Surface condition) |
- |
|
|
|
| 5 - Table 5 (vi) (Surface integrity) |
- |
|
|
|
| 5 - Table 5 (vii) (Acceptability) |
- |
|
|
|
| 6 (Marking and labelling) |
- |
|
|
|
| 7 (Designation) |
- |
|
|
|
|
- |
-
- |
| 297 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 9873 : Part 1 (2019) |
Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2 - 5.24.2 ( Reasonably foreseeable abuse -Drop Test) |
- |
|
|
|
| 4.2 - 5.24.5 ( Reasonably foreseeable abuse -Torque test) |
- |
|
|
|
| 4.2 - 5.24.6.2 ( Reasonably foreseeable abuse -Tension test for seams in soft-filled (stuffed) toys. beanbag-type toys, and other similar filled toys) |
- |
|
|
|
| 4.2 - 5.24.6.3 ( Reasonably foreseeable abuse -Tension test for pompoms) |
- |
|
|
|
|
- |
-
Except for following tests: 5.6 Test for Pre-school play figures 5.11.2 Length of cords and electrical cables 5.11.5 Self-retracting cords 5.13 Test for closures and toy chest lids 5.24.3 Tip-over test for large and bulky toys 5.24.6 Tension test 5.25 Determination of sound pressure levels 5.27 Dynamic strength for toy scooters 5.31 Tension test for magnets 5.32 Magnetic flux index Quantity: 3-10 based on the sample |
| 298 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 9968 : Part 1 (2025) |
Elastomer Insulated Cables - Specification Part 1 for Working Voltages up to and including 1100 volts (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.1 (Copper Conductor) |
- |
|
|
|
| Cl-4.2 (Aluminum Conductor) |
- |
|
|
|
| Cl-6.1 (Proofed Tape) |
- |
|
|
|
| Cl-6.2 ("Polyethylene Terephthalate (PETP) Tape or
Plastic Tape or Any Other Suitable Tape") |
- |
|
|
|
| Cl-6.3 (Glass Tape) |
- |
|
|
|
| Cl-7 (Fillers) |
- |
|
|
|
| Cl-8.1 (Textile Braid) |
- |
|
|
|
| Cl-8.2 (Glass Braid) |
- |
|
|
|
| Cl-9.1 (General Service Insulated Cables and Flexible Cords) |
- |
|
|
|
| Cl-9.2 (Heat Resisting Insulated Cables) |
- |
|
|
|
| Cl-9.3 (Silicon Rubber Insulated Cable) |
- |
|
|
|
| Cl-10.1 (Preservative Compound) |
- |
|
|
|
| Cl-10.2 (Varnish) |
- |
|
|
|
| Cl-12 (separator tape) |
- |
|
|
|
| Cl-14 (Core Identification) |
- |
|
|
|
| Cl-18 (Laying UP of Cores) |
- |
|
|
|
| Cl-19 (Binder Tape) |
- |
|
|
|
| Cl-20.2 (Thickness of Sheath) |
- |
|
|
|
| Cl-20.3 (Tolerance on Thickness of Sheath) |
- |
|
|
|
| Cl-20.4 (Colour) |
- |
|
|
|
| Cl-22.1 (i) (a) (Conductor resistance test) |
- |
|
|
|
| Cl-22.1 (i) (b) (High voltage test or spark test.) |
- |
|
|
|
| Cl-22.1 (ii) (a) (Annealing test (for copper);) |
- |
|
|
|
| Cl-22.1 (ii) (b) (Tensile Test ((for aluminium);) |
- |
|
|
|
| Cl-22.1 (ii) (c) (Wrapping test (for aluminium);) |
- |
|
|
|
| Cl-22.1 (ii) (f) (Tensile strength and elongation at break of insulation and sheath) |
- |
|
|
|
| Cl-22.1 (ii) (g) (Hot set test for insulation and sheath) |
- |
|
|
|
| Cl-22.1 (ii) (h) (High voltage test) |
- |
|
|
|
| Cl-22.1 (ii) (i) (Insulation resistance test) |
- |
|
|
|
| Cl-22.1 (iii) (f) (Test for thickness of insulation and sheath and overall diameter) |
- |
|
|
|
| Electrical (Tensile strength and elongation at break) |
- |
|
|
|
| Cl-22.1 (iii) (g), 2 (Ageing in air oven) |
- |
|
|
|
| Cl-22.1 (iii) (g), 3 (Ageing in air bomb) |
- |
|
|
|
| Cl-22.1 (iii) (g), 4 (Ageing In oxygen bomb) |
- |
|
|
|
| Cl-22.1 (iii) (g), 5 (Hot set) |
- |
|
|
|
| Cl-22.1 (iii) (g), 6 (Oil resistance;) |
- |
|
|
|
| Cl-22.1 (iii) (g), 7 (Tear resistance) |
- |
|
|
|
| Cl-22.1 (iii) (i) (High voltage (water immersion) test;) |
- |
|
|
|
| Cl-22.1 (iii) (j) (Flammability test) |
- |
|
|
|
| Cl-24.1 (Manufacturer’s Identification) |
- |
|
|
|
| Cl-25 (Packing and Morning) |
- |
|
|
|
| CL. 22.1 (iv) a, (Flexing test for Cords for use with electric iron) |
- |
|
|
|
|
- |
-
Excluding Cl.21.1 water absorption test (electrical) for IE2/IE3/IE4 |
| 299 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 7098 : Part 1 (2025) |
Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification Part 1 For Working Voltages up to and Including 1 100 Volts (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4 (Conductors -Material) |
- |
|
|
|
| Cl-5, Table-1 (i) (Tensile strength) |
- |
|
|
|
| Cl-5, Table-1 (ii) (a) (Elongation at break- Ageing in air oven) |
- |
|
|
|
| Cl-5, Table-1 (ii) (b) (Variation in tensile strength, from that without ageing) |
- |
|
|
|
| Cl-5, Table-1 (ii) (c) (Variation in elongation at break, from that without ageing) |
- |
|
|
|
| Cl-5, Table-1 (iii) (a) (Hot set- Treatment;) |
- |
|
|
|
| Cl-5, Table-1 (iii) (c) (Hot set- Permanent elongation after cooling) |
- |
|
|
|
| Cl-5, Table-1 (iii) (b) (Hot set- Elongation under load) |
- |
|
|
|
| Cl-5, Table-1 (iv) (Shrinkage) |
- |
|
|
|
| Cl-5, Table-1 (v) (Water absorption (gravimetric)) |
- |
|
|
|
| Cl-5, Table-1 (vi) (Volume resistivity) |
- |
|
|
|
| Cl-6.1 (a) (Fillers and inner sheath- Vulcanized or unvulcanized rubber) |
- |
|
|
|
| Cl-6.1 (B) (Fillers and inner sheath- Thermoplastic materials) |
- |
|
|
|
| Cl-7 (Armouring) |
- |
|
|
|
| Cl-8 (Outer Sheath) |
- |
|
|
|
| Cl-10.3 (Tolerance on Thickness of Insulation) |
- |
|
|
|
| Cl-11 (Core Identification) |
- |
|
|
|
| Cl-12 (Laying up of Cores) |
- |
|
|
|
| Cl-13 (Inner Sheath (Common Covering)) |
- |
|
|
|
| Cl-14.1 (Armouring- Application) |
- |
|
|
|
| Cl-14.1.2 (armour round wires/formed wires) |
- |
|
|
|
| Cl-14.2 (Type of Armour) |
- |
|
|
|
| Cl-14.3 (Dimensions) |
- |
|
|
|
| Cl-14.4 (Joints) |
- |
|
|
|
| Cl-14.5 (Resistance) |
- |
|
|
|
| Cl-15.3 (Thickness of Outer Sheath) |
- |
|
|
|
| Cl-16.1 (i) (a) (Test on conductor: Annealing test (for copper);) |
- |
|
|
|
| Cl-16.1 (i) (b) (Test on conductor: Tensile test (for aluminium);) |
- |
|
|
|
| Cl-16.1 (i) (c) (Test on conductor: Wrapping test (for aluminium);) |
- |
|
|
|
| Cl-16.1 (i) (d) (Test on conductor: Resistance test) |
- |
|
|
|
| Cl-14.6 (a) (Physical tests on round wires/formed wires- Tensile strength) |
- |
|
|
|
| Cl-14.6 (b) (Physical tests on round wires/formed wires- Elongation at break) |
- |
|
|
|
| Cl-14.6 (c) (Physical tests on round wires/formed wires- Torsion test for round wires) |
- |
|
|
|
| Cl-14.6 (d) (Physical tests on round wires/formed wires- Winding test for formed wires) |
- |
|
|
|
| Cl-14.6 (e) (Physical tests on round wires/formed wires- Uniformity of zinc coating) |
- |
|
|
|
| Cl-14.6 (f) (Physical tests on round wires/formed wires- Mass of zinc coating) |
- |
|
|
|
| Cl-14.6 (g) (Physical tests on round wires/formed wires- Resistivity.) |
- |
|
|
|
| Cl-10, 13, 15 (Test for thickness of insulation and sheath) |
- |
|
|
|
| Cl-16.1 (v) (1) (PVC Sheath- Tensile strength and elongation at break;) |
- |
|
|
|
| Cl-16.1 (v) (2) (PVC Sheath- Ageing in air oven) |
- |
|
|
|
| Cl-16.1 (v) (3) (PVC Sheath- Loss of mass in air oven) |
- |
|
|
|
| Cl-16.1 (v) (5) (PVC Sheath- Hot deformation test) |
- |
|
|
|
| Cl-16.1 (v) (6) (PVC Sheath- Heat shock test) |
- |
|
|
|
| Cl-16.1 (v) (7) (PVC Sheath- Thermal stability) |
- |
|
|
|
| Cl-17.2 (High voltage test) |
- |
|
|
|
| Cl-17.3 (Flammability test) |
- |
|
|
|
| Cl-17.4 (Oxygen index test (FR, FR-LSH or LSHF Sheath)) |
- |
|
|
|
| Cl-17.5 (Flame retardance test on single cable) |
- |
|
|
|
| Cl-17.6 (Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables)) |
- |
|
|
|
| Cl-17.8 (Smoke density test (FR-LSH or LSHF Sheath)) |
- |
|
|
|
| Cl-17.9 (Temperature index test; (FR, FR-LSH or LSHF Sheath)) |
- |
|
|
|
| Cl-16.4 (i) (Cold bend test for outer sheath) |
- |
|
|
|
| Cl-16.4 (ii) (Cold impact test for outer sheath) |
- |
|
|
|
| Cl. 9 (Conductor - Regarding Construction Compliance) |
- |
|
|
|
| Cl. 10.4 (Application of Insulation) |
- |
|
|
|
| Cl. 13.3 (Thickness of Inner sheath) |
- |
|
|
|
| Cl. 15.1 (Application of Outer sheath) |
- |
|
|
|
| Cl. 15.2 (Clour of Outer sheath) |
- |
|
|
|
|
- |
-
Complete test for category C1& C2, Test facility not available for Cl. 17.10 Test for pH and conductivity, Cl. 17.11Test for light transmission, Table 1B Cold elongation test for LSHF (Optional). |
| 300 |
Electrical Research and Development Association, gujurat
| 7101125
| IS 16221 : Part 2 (2015) |
Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters |
Upto 250 kVA |
979000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(General Test Requireements) |
- |
160000 |
|
0.1 to 20 kW: 30000
20.1 to 50 kW: 50000
50.1 to 125 kW: 85000
125.1 to 250 kW: 160000 |
| 5(Marking and documentation) |
- |
5000 |
|
0.1 to 20 kW: 5000
20.1 to 50 kW: 5000
50.1 to 125 kW: 5000
125.1 to 250 kW: 5000 |
| 6(Environmental requirements and conditions) |
- |
150000 |
|
0.1 to 20 kW: 25000
20.1 to 50 kW: 40000
50.1 to 125 kW: 75000
125.1 to 250 kW: 150000 |
| 7(Protection against electric shock and energy hazards) |
- |
140000 |
|
0.1 to 20 kW: 25000
20.1 to 50 kW: 30000
50.1 to 125 kW: 70000
125.1 to 250 kW: 140000 |
| 8(Protection against Mechanical Hazards) |
- |
140000 |
|
0.1 to 20 kW: 20000
20.1 to 50 kW: 30000
50.1 to 125 kW: 70000
125.1 to 250 kW: 140000 |
| 9(Protection against Fire Hazards) |
- |
140000 |
|
0.1 to 20 kW: 20000
20.1 to 50 kW: 30000
50.1 to 125 kW: 70000
125.1 to 250 kW: 140000 |
| 10(Protection against Sonic Pressure Hazards) |
- |
60000 |
|
0.1 to 20 kW: 15000
20.1 to 50 kW: 20000
50.1 to 125 kW: 40000
125.1 to 250 kW: 60000 |
| 11(Protection against Liquid Hazards) |
- |
27000 |
|
0.1 to 20 kW: 15000
20.1 to 50 kW: 15000
50.1 to 125 kW: 20000
125.1 to 250 kW: 27000 |
| 12(Protection against Chemical Hazards) |
- |
27000 |
|
0.1 to 20 kW: 15000
20.1 to 50 kW: 15000
50.1 to 125 kW: 20000
125.1 to 250 kW: 27000 |
| 13(Physical Requirements) |
- |
60000 |
|
0.1 to 20 kW: 25000
20.1 to 50 kW: 30000
50.1 to 125 kW: 50000
125.1 to 250 kW: 60000 |
| 14(Components) |
- |
60000 |
|
0.1 to 20 kW: 15000
20.1 to 50 kW: 25000
50.1 to 125 kW: 40000
125.1 to 250 kW: 60000 |
| Cl.15(Software and firmware performing safety functions) |
- |
10000 |
|
0.1 to 20 kW: 10000
20.1 to 50 kW: 10000
50.1 to 125 kW: 10000
125.1 to 250 kW: 10000 |
|
30 Nov, 2028 |
-
- |
