BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15546 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

331

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

9850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	8350	Stress Relief test Opacity Effect on water test Short term Hydraulic test (27 °C/1h.)
2.2.2, Table 1(Size)	-	500	-
2.2.2, Table 1(Socket Laying Length)	-	500	-
2.2.3( inside diameter of the socket)	-	500	-

31 Dec, 2029

-
-

332

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

9850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	6850	-
2.2.2, Table 1(Size)	-	500	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	500	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	500	-
2.2.3( inside diameter of the socket)	-	500	-
2.2.3(Socket length)	-	500	-
6.1.1(VCM Content Test)	-	3000	-

31 Dec, 2029

-
-

333

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

9850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2, Table 1(Size)	-	500	-
2.2.2, Table 1(90 ̊ Elbow Laying Length)	-	500	-
2.2.3( inside diameter of the socket)	-	500	Socket length & diameter at Mid point of socket length
2.2.3(Socket length)	-	500	-
6.1.1(VCM Content Test)	-	3000	-
2.1(General)	-	6850	Stress Relief test Opacity Effect on water test Short term Hydraulic test (27 °C/1h.)

31 Dec, 2029

-
-

334

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

ALL

9850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	500	Minimum Thickness
table 1 sl.no: 19(315.0)	-	500	Minimum Thickness
2.2.3( inside diameter of the socket)	-	500	Socket length & diameter at Mid point of socket length
2.1(General)	-	9850	Stress Relief test Opacity Effect on water test Short term Hydraulic test (27 °C/1h.) VCM CONTENT K VALUE

31 Dec, 2029

-
-

335

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 11584 (1986)

Specification for high density polyethylene (Hdpe) crates for milk satchets

10650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2(Material )	-	1050	Material Identification (Chemical Analysis)
2.3(Shape and Dimensions)	-	500	Shape & Dimensions
2.4(Mass )	-	500	Mass
2.5(Appearance and Surface Finish)	-	500	Appearance & surface finish
2.7(Resistance to Stress)	-	1000	Resistance to Stress ( 80°C for 6 hrs)
2.8(Resistance to Applied Load)	-	1000	Resistance to applied load (100 hrs/270°C)
2.9(Strength)	-	2200	Resistance to drop, Resistance to low temperature drop (6hrs/5°C) (6 x200)
2.1(Dimensional Stability)	-	900	Dimensional stability (80 °C/30 min)
2.6(Colour Fastness)	-	850	-

31 Dec, 2029

-
-

336

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 16647 (2017)

Oriented unplasticized polyvinyl chloride (Pvc - O) pipes for water supply - Specification

56600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.5( Density, g/cc)	-	700	--
9 /9.1 / 27 degree centigrate(MECHANICAL CHARACTERISTICS OF PIPES9./ Resistance to Hydrostatic Pressure)	-	12200	1200+11000
7.3( Opacity)	-	700	--
9.2, table -11( Resistance to External Blows at 0 °C)	-	1000	--
8.2 table-9( Pipe Ends)	-	500	--
5.3(VCM Content)	-	3000	--
5.4( K-Value)	-	1100	--
7.2( Colour)	-	500	--
8.1.1, 8.1.1.2, table-3(Dimension of Pipes / Diameter/8.1.1.2 Diameter at any point)	-	500	--
8.1.2, table 4 to 7(Wall Thickness)	-	500	--
8.1.3 (Length, meter)	-	500	--
8.2 table-9(Dimensions of Integral Socket)	-	500	--
9.3 table-12( Ring Stiffness)	-	1600	1100+500
9.4, annexure-E( Orientation Factor)	-	1200	700 + 500
10, table-13( PHYSICAL AND 1CHARACTERISTICS)	-	6400	1100+3000+1000+1300
5.5( Density, g/cc)	-	500	--
9.3 table-12( Ring Stiffness)	-	1100	--
9.4, annexure-E( Orientation Factor)	-	1400	--
10, table-13( PHYSICAL AND 1CHARACTERISTICS)	-	6200	1100+3000+1000+1100
11,11.1( MECHANICAL CHARACTERISTICS OF ASSEMBLIES INCLUDING JOINTS/ 11.1 Assemblies with Non-End-Load-Bearing Joints)	-	11000	-
11.2 / 11.2.1( Short-Term Pressure Test for Leak Tightness of Assemblies)	-	11000	-
11.3( Short-Term Negative Pressure Test for Leak Tightness of Assemblies)	-	11000	-

31 Dec, 2029

-
-

337

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 16352 (2020)

Geosynthetics – High density polyethylene (HDPE) geomembranes for lining – Specification (first revision)

100785 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	925	--
5,3.1, Table2,iii) Type I / II / III / IV / V / VI Annex K(Lowest individual of 10 thickness value)	-	1800	--
5,3.1, Table1,iii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Lowest individual of 10 thickness value)	-	750	Length, Width & thickness
5,3.1, Table 2,v) d) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking elongation)	-	2700	--
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	1700	--
5,3.1, Table 2,xvi) Type I / II / III / IV / V / VI Annex J(Stress crack resistance)	-	1700	--
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	2200	--
5,3.1, Table1,xiii) Type I / II / III / IV / V / VI / VII Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	54000	--
5,3.1, Table 2,xiv) Type I / II / III / IV / V / VI Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	2200	--
3, 3.1(MATERIAL AND MANUFACTURE)	-	500	--
3, 3.2(MATERIAL AND MANUFACTURE If two or more pieces of geomembranes are used, the material shall be joined together by a suitable heat sealing process keeping an overlap of at least 2.5 cm. )	-	0	--
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	1600	--
5,3.1, Table 2,vii) Type I / II / III / IV / V / VI Annex D(Puncture resistanc)	-	1100	--
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	1800	--
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F(Hydrostatic resistance)	-	1800	--
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	1350	--
5,3.1, Table1,xi) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black dispersion)	-	700	--
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	90350	conditioning charge-89000.00
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	500	--
6(DIMENSIONS AND TOLERANCES The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.)	-	0	--
7, 7.2(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS)	-	500	--
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	1600	--
5,3.1, Table 2,xvi) Type I / II / III / IV / V / VI Annex J(Stress crack resistance)	-	1600	--
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	0	--
3, 3.1(MATERIAL AND MANUFACTURE)	-	0	--
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	1350	--
5,3.1, Table2,iv) Type I / II / III / IV / V / VI Annex L(Average asperity height)	-	500	-
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	300	--
5,3.1, Table2,i) a) Type I / II / III / IV / V / VI IS 7016 (Part 1)(Length)	-	500	-
5,3.1, Table 2,i) b) Type I / II / III / IV / V / VI IS 7016 (Part 1)(width)	-	500	-

31 Dec, 2029

-
-

338

Rajkot Metlab Services LLP, Rajkot

7183706

IS 16172 (2023)

Reinforcement Couplers for Mechanical Splices of Steel Bars in Concrete ? Specification (first revision)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Classification)	-	200	-
6(Manufacture)	-	200	-
7(Workmanship and Finish)	-	1500	-
8(Nominal Sizes)	-	200	-
9.2.1(Tensile Strength)	-	5100	-
9.2.1.1(Disengagement test for threaded couplers)	-	200	-
9.2.2(Percentage Elongation)	-	5000	-
9.3(Slip Test)	-	5100	-
9.4(Cyclic Tensile Test)	-	0	-
9.5.1(Low cycle Fatigue Test)	-	0	-
9.5.2(High Cycle Fatigue test)	-	0	-
5(Classification)	-	0	-
6(Manufacture)	-	0	-
7(Workmanship and Finish)	-	0	-
8(Nominal Sizes)	-	0	-
9.2.1(Tensile Strength)	-	0	-
9.2.1.1(Disengagement test for threaded couplers)	-	0	-
9.2.2(Percentage Elongation)	-	0	-
9.3(Slip Test)	-	0	-
9.4(Cyclic Tensile Test)	-	0	-
9.5.1(Low cycle Fatigue Test)	-	0	-
9.5.2(High Cycle Fatigue test)	-	0	-

12 Jan, 2028

-
Included w.e.f 08.10.2026 Exclusion: 9.4 (Cyclic Tensile Test), 9.5.1 (Low cycle Fatigue Test), 9.5.2 (High Cycle Fatigue test)

339

Dashmesh Test Lab Private Limited

8186926

IS 302 : PART 1 (Water-Bed Heaters)

Water-Bed Heaters

ALL TYPE

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classifications)	-	200	-
5(General conditions for tests)	-	200	-
4(General Requirement)	-	200	-
11.8(Temperature rise)	-	200	-
11.7(Duration corresponding)	-	200	-
11.6(Combined appliances)	-	200	-
11.5(Motor-operated appliances)	-	200	-
11.4(Heating appliances)	-	200	-
8.1.5(Live parts of built-in appliances)	-	200	-
18(Endurance)	-	400	-
17(Overload protection of transformers and associated circuits)	-	400	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	200	-
32(Radiation Toxicity and Similar Hazards)	-	400	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.1(Ball pressure test)	-	200	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
24(Components)	-	200	-
23(General)	-	100	-
22(Construction verification related test)	-	100	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	500	-
19(Abnormal Operation)	-	500	-
18(Endurance Test requirements and tests)	-	500	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	100	-
16.0(General)	-	100	-
15.3(Humidity Test)	-	3000	-
15.2(Spillage Test)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.0(General)	-	200	-
14(Transient Over Voltages)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.1(General)	-	100	-
11.3(Heating)	-	200	-
11.2(General)	-	200	-
11.1(General)	-	200	-
10.2(Current input)	-	200	-
10.1(Power input)	-	200	-
9(Starting of motor operation test requirements and tests)	-	200	-
8.1.4(Protection against live parts against protective impedance)	-	200	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	200	-
8.1.2(Protection against live parts in openings)	-	199.98	-
8.1.1(Protection against live parts in all positions)	-	200	-
7(Marking and instructions)	-	200	-

22 Jul, 2028

-
Included w.e.f 19.10.2026 Exclusion: 19.11.4.1-19.11.4.7 (EMI/EMC)

340

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 2202 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 2 PARTICLE BOARD HIGH DENSITY FIBRE BOARD MEDIUM DENSITY FIBRE BOARD AND HARDBOARD FACE PANELS Fourth Revision

Alll

20499.94 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 6.1(Timber)	-	0	-
Clause No -6.2(Alternative Materials (LVL)	-	0	-
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	0	-
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	0	-
Clause No -6.2(Alternative Materials -plywood)	-	0	12500
Clause No -6.2(BWP grade flush door shutter)	-	0	14000
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	0	-
Clause No -6.4(Adhesive)	-	0	9000
Clause No -7.1(Construction)	-	0	-
Clause No - 7.3(" MDF board or HDF board ")	-	0.05	-
Clause No -9.2("Workmanship and finish")	-	0	-
Clause No -10.1(tests for flush door shutters)	-	20500	-
Clause No -10.2(End Immersion Test)	-	20500	-
Clause No -10.3(Glue Adhesion Test)	-	20500	-
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	0	-
5(SIZES AND TOLERANCES)	-	20500	-
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	20500	-
Cl-6.3.3 (Amendment NO 1)(B D P V, P D P V and M D P V types of flush door)	-	0	-
Cl-6.3.2(MDF board and HDF board)	-	20500	-
Cl-6.3.4(B N P V, P N P V and M N P V,)	-	20500	-
Cl-7.2(Face Panel)	-	0	-
Cl-7.4 (Amendment No 1)(Door Blanks)	-	0	-
Cl-8(Fittings)	-	0	-

-
Included w.e.f 21.10.2026

341

Rajkot Metlab Services LLP, Rajkot

7183706

IS 4948 (2020.0)

Welded steel wire fabric for general use - Specification (Second Revision)

7900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1(MATERIALS)	-	3500	-
Cl. 4.2(MATERIALS)	-	0	-
Cl. 5.1(MANUFACTURE OF MESH (Assembling of Wires))	-	100	-
Cl. 5.2(MANUFACTURE OF MESH)	-	0	-
Cl. 5.3(MANUFACTURE OF MESH)	-	0	-
Cl. 5.4(Spacing of Longitudinal and Transverse Wires)	-	200	-
Cl. 5.5(Tolerance of Size of Mesh)	-	200	-
Cl. 5.6(Tolerance of Size of Sheet or Roll)	-	200	-
Cl. 6(TEST FOR WELDING)	-	3400	-
Cl. 9.1(Marking)	-	100	-
Cl. 9.1(Marking)	-	0	-
Cl. 9.1(Marking)	-	0	-
Cl. 9.1(Marking)	-	0	-
Cl. 9.1(Marking)	-	0	-
Cl. 9.1(Marking)	-	0	-
Cl. 9.1(Marking)	-	0	-
Cl. 9.3(BIS Certification Marking)	-	100	-
Cl. 10.1(Finish)	-	100	-
Cl. 4.1(MATERIALS)	-	0	-
Cl. 4.2(MATERIALS)	-	0	-
Cl. 5.1(MANUFACTURE OF MESH (Assembling of Wires))	-	0	-
Cl. 5.2(MANUFACTURE OF MESH)	-	0	-
Cl. 5.3(MANUFACTURE OF MESH)	-	0	-
Cl. 5.4(Spacing of Longitudinal and Transverse Wires)	-	0	-
Cl. 5.5(Tolerance of Size of Mesh)	-	0	-
Cl. 5.6(Tolerance of Size of Sheet or Roll)	-	0	-
Cl. 6(TEST FOR WELDING)	-	0	-
Cl. 4.1(MATERIALS)	-	0	-
Cl. 4.2(MATERIALS)	-	0	-
Cl. 5.1(MANUFACTURE OF MESH (Assembling of Wires))	-	0	-
Cl. 5.2(MANUFACTURE OF MESH)	-	0	-
Cl. 5.3(MANUFACTURE OF MESH)	-	0	-
Cl. 5.4(Spacing of Longitudinal and Transverse Wires)	-	0	-
Cl. 5.5(Tolerance of Size of Mesh)	-	0	-
Cl. 5.6(Tolerance of Size of Sheet or Roll)	-	0	-
Cl. 6(TEST FOR WELDING)	-	0	-
Cl. 9.1(Marking)	-	0	-
Cl. 9.1(Marking)	-	0	-
Cl. 9.1(Marking)	-	0	-
Cl. 9.1(Marking)	-	0	-
Cl. 9.1(Marking)	-	0	-
Cl. 9.1(Marking)	-	0	-
Cl. 9.1(Marking)	-	0	-
Cl. 9.3(BIS Certification Marking)	-	0	-
Cl. 10.1(Finish)	-	0	-

12 Jan, 2028

-
-

342

Rajkot Metlab Services LLP, Rajkot

7183706

IS 6528 (2024)

Stainless steel wire - Specification ( Second Revision )

Above 4 mm

18900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 6(FREEDOM FROM DEFECTS)	-	500	-
As per clause 7(CARBON)	-	500	-
As per clause 7(SILICON)	-	500	-
As per clause 7(MANGANESE)	-	500	-
As per clause 7(PHOSPHORUS)	-	500	-
As per clause 7(SULPHUR)	-	500	-
As per clause 7(CHROMIUM)	-	500	-
As per clause 7(MOLYBEDNUM)	-	500	-
As per clause 7(NICKEL)	-	500	-
As per clause 7(NITROGEN)	-	500	-
As per clause 7(COPPER)	-	500	-
As per clause 7(NIOBIUM)	-	500	-
As per clause 7(TITANIUM)	-	500	-
As per clause 7(ALUMINIUM)	-	500	-
As per clause 8(HEAT TREATMENT)	-	500	-
As per clause 9(Dimension Tolerance)	-	300	-
As per clause 10(TENSILE TEST)	-	2500	-
As per clause 10.2(REVERSE BEND TEST)	-	1000	-
As per clause 10.3(TORSION TEST)	-	3500	-
As per clause 14(FINISH)	-	500	-
As per clause 15(CORROSION RESISTANCE)	-	3500	-
As per clause 16.2(MARKING)	-	100	-
As per Clause 6(FREEDOM FROM DEFECTS)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 7(CARBON)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 7(SILICON)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 7(MANGANESE)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 7(PHOSPHORUS)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 7(SULPHUR)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 7(CHROMIUM)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 7(MOLYBEDNUM)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 7(NICKEL)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 7(NITROGEN)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 7(COPPER)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 7(NIOBIUM)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 7(TITANIUM)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 7(ALUMINIUM)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 8(HEAT TREATMENT)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 9(Dimension Tolerance)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 10(TENSILE TEST)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 10.2(REVERSE BEND TEST)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 10.3(TORSION TEST)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 14(FINISH)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 15(CORROSION RESISTANCE)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.
As per clause 16.2(MARKING)	-	0	Charges not applicable, as the same clause/requirement is repeated and the rates have already been submitted under the above-mentioned clause.

12 Jan, 2028

-
-

343

Rajkot Metlab Services LLP, Rajkot

7183706

IS 4712 (1984)

Specification for forged steel, socket - Welding fittings (First Revision)

19750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General requirements)	-	500	-
4.1(Chemical composition)	-	5000	-
4.2(Mechanical requirements)	-	5000	-
5.1(Concentricity of bores)	-	1500	-
5.2(Coincidence of axes)	-	1500	-
5.3(Dimension of fitting)	-	1500	-
6.1(Tensile & hardness test)	-	2500	-
6.2(Hydraulic test)	-	500	-
6.3(Hydrostatic testing of fittings)	-	500	-
7.1(Size and thickness)	-	750	-
8(Marking)	-	500	-
Cl. 4.1 Sl No. i)(Carbon)	-	0	-
Cl. 4.1 Sl No. ii)(Manganese)	-	0	-
Cl. 4.1 Sl No. iii)(Phosphorus)	-	0	-
Cl. 4.1 Sl No. iv)(Sulphur)	-	0	-
Cl. 4.1 Sl No. v)(Silicon)	-	0	-
3.1(General requirements)	-	0	-
4.1(Chemical composition)	-	0	-
4.2(Mechanical requirements)	-	0	-
5.1(Concentricity of bores)	-	0	-
5.2(Coincidence of axes)	-	0	-
5.3(Dimension of fitting)	-	0	-
6.1(Tensile & hardness test)	-	0	-
6.2(Hydraulic test)	-	0	-
6.3(Hydrostatic testing of fittings)	-	0	-
7.1(Size and thickness)	-	0	-
8(Marking)	-	0	-
Cl. 4.1 Sl No. i)(Carbon)	-	0	-
Cl. 4.1 Sl No. ii)(Manganese)	-	0	-
Cl. 4.1 Sl No. iii)(Phosphorus)	-	0	-
Cl. 4.1 Sl No. iv)(Sulphur)	-	0	-
Cl. 4.1 Sl No. v)(Silicon)	-	0	-

12 Jan, 2028

-
-

344

Rajkot Metlab Services LLP, Rajkot

7183706

IS 10748 (2025)

Hot-Rolled Steel Strip for Welded Tubes and Pipes - Specification ( Third Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Supply of Materials)	-	200	-
Cl-6(Manufacture)	-	200	-
Cl-7.1(Ladle Analysis)	-	2500	-
Cl-7.2(Product Analysis)	-	2500	-
Cl-7.3(Carbon Equivalent Value)	-	2500	-
Cl-8.1(Number of Tensile Tests)	-	200	-
Cl-8.2(Tensile Test Pieces)	-	1000	-
Cl-8.3(Tensile Test)	-	2500	-
Cl-8.3, Table-5 & 6(Tensile Strength, MPa)	-	2500	-
Cl-8.3, Table-5 & 6(Yield Strength, MPa)	-	2500	-
Cl-8.3, Table-5 & 6(Internal Diameter of Bend)	-	200	-
Cl-9.1(Number of Bend Tests)	-	200	-
Cl-9.2(Bend test)	-	2500	-
Cl-10(Re- Tests)	-	5500	-
Cl-11(freedam from Defects)	-	200	-
Cl-12(Dimensions)	-	500	-
Cl-13(Tolerances)	-	500	-
Cl-14(Calculation of Mass)	-	500	-
Cl-16(Marking)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Carbon)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Manganese)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Sulphur)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Phosphorus)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Carbon Equivalent Value (CEV))	-	2500	-
Cl-7.1, 7.2, 7.3 & 7.4(silicon)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(aluminium)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(total aluminium)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Niobium)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Vanadium)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Titanium)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Nitrogen)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Copper)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Mo + Cr +W)	-	1500	-
Cl-7.1, 7.2, 7.3 & 7.4(Mo)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Boron)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Nickel)	-	500	-
Cl-7.1, 7.2, 7.3 & 7.4(Chromium)	-	500	-
Cl-8.3, Table-5 & 6(Elongation at Gauge Length,)	-	2500	-

12 Jan, 2028

-
Included w.e.f 08.10.2026

345

MARQUIS TECHNOLOGIES PRIVATE LIMITED, NOIDA

8175126

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	1500	-
Cl-4.2(Energy source classifications)	-	1500	-
Cl-4.3(Protection against energy sources)	-	1500	-
Cl-4.4(Safeguards)	-	1500	-
Cl-4.5(Explosion)	-	1500	-
Cl-4.6(Fixing of conductors and conductive parts)	-	1500	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1500	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	1500	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	1500	-
Cl-4.10(Components requirements)	-	1500	-
Cl-5.1(General- Electrically-caused injury)	-	1500	-
Cl-5.2(Classification and limits of electrical energy sources)	-	1500	-
Cl-5.3(Protection against electrical energy sources)	-	1500	-
Cl-5.4(Insulation materials and requirements)	-	1500	-
Cl-5.5(Components as safeguards)	-	1500	-
Cl-5.6(Protective conductor)	-	1500	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	1500	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1500	-
Cl-6.1(General- Electrically-caused fire)	-	1500	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	1500	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	1500	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	1500	-
Cl-6.5(Internal and external wiring)	-	1500	-
Cl-7.1(General- Injury caused by hazardous substances)	-	1500	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	1500	-
Cl-7.3(Ozone exposure)	-	1500	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	1500	-
Cl-7.5(Use of instructional safeguards and instructions)	-	1500	-
Cl-8.1(General- Mechanically-caused injury)	-	1500	-
Cl-8.2(Mechanical energy source classifications)	-	1500	-
Cl-8.3(Safeguards against mechanical energy sources)	-	1500	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	1500	-
Cl-8.5(Safeguards against moving parts)	-	1500	-
Cl-8.6(Stability of equipment)	-	1500	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	1500	-
Cl-8.8(Handle strength)	-	1500	-
Cl-8.9(Wheels or casters attachment requirements)	-	1500	-
Cl-8.10(Carts, stands, and similar carriers)	-	1500	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	1500	-
Cl-9.1(General-Thermal burn injury)	-	1500	-
Cl-9.2(Thermal energy source classifications)	-	1500	-
Cl-9.3(Touch temperature limits)	-	1500	-
Cl-9.4(Safeguards against thermal energy sources)	-	1500	-
Cl-9.5(Requirements for safeguards)	-	1500	-
Cl-9.6(Requirements for wireless power transmitters)	-	1500	-
Annex B-3(Simulated abnormal operating conditions)	-	1500	-
Annex B-4(Simulated single fault conditions)	-	1500	-
Cl-10.3(Safeguards against laser radiation)	-	1500	-
Cl-10.4("Safeguards against optical radiation from lamps and lamp systems (including LED types)")	-	1500	-
Cl-10.5(Safeguards against X-radiation)	-	1500	-
Cl-10.6(Safeguards against acoustic energy sources)	-	1500	-
Annex A(Examples of equipment within the scope of this document)	-	1500	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	1500	-
Annex C-1(Protection of materials in equipment from UV radiation)	-	1500	-
Annex B-2(Normal operating conditions)	-	1500	-
Annex C-2(UV light conditioning test)	-	1500	-
Annex D-1(Impulse test generators)	-	1500	-
Annex D-2(Antenna interface test generator)	-	1500	-
Annex D-3(Electronic pulse generator)	-	1500	-
Annex E-1(Electrical energy source classification for audio signals)	-	1500	-
Annex E-2(Audio signals used during test)	-	1500	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	1500	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	1500	-
Annex F-2(Letter symbols and graphical symbols)	-	1500	-
Annex F-3(Equipment markings)	-	1500	-
Annex F-4(Instructions)	-	1500	-
Annex F-5(Instructional safeguards)	-	1500	-
Annex G-4(Connectors)	-	1500	-
Annex H-1(General- Criteria for telephone ringing signals)	-	1500	-
Annex H-2(Method A)	-	1500	-
Annex H-3(Method B)	-	1500	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	1500	-
Annex K-1(General- Safety interlocks)	-	1500	-
Annex K-3(Inadvertent change of operating mode)	-	1500	-
Annex K-4(Interlock safeguard override)	-	1500	-
Annex L-1(General requirements)	-	1500	-
Annex L-2(Permanently connected equipment)	-	1500	-
Annex L-3()	-	1500	-
Annex L-4(Single-phase equipment)	-	1500	-
Annex L-6(Switches as disconnect devices)	-	1500	-
Annex L-7(Plugs as disconnect devices)	-	1500	-
Annex L-8(Multiple power sources)	-	1500	-
Annex L-9(Compliance criteria)	-	1500	-
Annex M-1(General requirements)	-	1500	-
Annex M-2(Safety of batteries and their cells)	-	1500	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	1500	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	1500	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	1500	-
Annex M-6(Safeguards against short-circuits)	-	1500	-
Annex M-9(Preventing electrolyte spillage)	-	1500	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	1500	-
Annex N(Electrochemical potentials (V))	-	1500	-
Annex O(Measurement of creepage distances and clearances)	-	1500	-
Annex P-1(General-Safeguards against conductive objects)	-	1500	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	1500	-
Annex P-3(Safeguards against spillage of internal liquids)	-	1500	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	1500	-
Annex Q-1(Limited power source)	-	1500	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	1500	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	1500	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	1500	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	1500	-
Annex S-4(Flammability classification of materials)	-	1500	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	1500	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	1500	-
Annex T-1(General-Mechanical strength tests)	-	1500	-
Annex T-2(Steady force test, 10 N)	-	1500	-
Annex T-3(Steady force test, 30 N)	-	1500	-
Annex T-4(Steady force test, 100 N)	-	1500	-
Annex T-5(Steady force test, 250 N)	-	1500	-
Annex T-6(Enclosure impact test)	-	1500	-
Annex T-7(Drop test)	-	1500	-
Annex T-8(Stress relief test)	-	1500	-
Annex T-9(Glass impact test)	-	1500	-
Annex T-10(Glass fragmentation test)	-	1500	-
Annex T-11(Test for telescoping or rod antennas)	-	1500	-
Annex V-1(Accessible parts of equipment)	-	1500	-
Annex V-2(Accessible part criterion)	-	1500	-
Annex W(Comparison of terms introduced in this document)	-	1500	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	1500	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	1500	-
Annex Y-3(Resistance to corrosion)	-	1500	-
Annex Y-4(Gaskets)	-	1500	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	1500	-
Annex Y-6(Mechanical strength of enclosures)	-	1500	-

13 Dec, 2029

-
included w.e.f 22.10.2026. exclusion: 1 Cl-7.3 (Ozone exposure) 2 Cl-10.1 (General-Radiation) 3 Cl-10.2 (Radiation energy source classifications) 4 Cl-10.3 (Safeguards against laser radiation) 5 Cl-10.4 (""Safeguards against optical radiation from lamps and lamp systems (including LED types) 6 Cl-10.5 (Safeguards against X-radiation) 7 Cl-10.6 (Safeguards against acoustic energy sources) 8 Annex C-1 (Protection of materials in equipment from UV radiation 9 Annex C-2 (UV light conditioning test) 10 Annex D-2 (Antenna interface test generator) 11 Annex D-3 (Electronic pulse generator) 12 Annex G-1 (Switches) 13 Annex G-2 (Relays) 14 Annex G-3 (Protective devices) 15 Cl-7.3 (Ozone exposure) 16 Cl-10.1 (General-Radiation) 17 Cl-10.2 (Radiation energy source classifications) 18 Cl-10.3 (Safeguards against laser radiation) 19 Cl-10.4 (""Safeguards against optical radiation from lamps and lamp systems 20 Cl-10.5 (Safeguards against X-radiation) 21 Cl-10.6 (Safeguards against acoustic energy sources) 22 Annex C-1 (Protection of materials in equipment from UV radiation) 23 Annex C-2 (UV light conditioning test) 24 Annex D-2 (Antenna interface test generator) 25 Annex D-3 (Electronic pulse generator) 26 Annex G-1 (Switches) 27 Annex G-2 (Relays) 28 Annex G-3 (Protective devices) 29 Annex G-5 (Wound components) 30 Annex G-7 (Mains power supply cords and interconnection cables) 31 Annex G-8 (Varistors) 32 Annex G-9 (Integrated circuit (IC) 33 Annex G-10 (Resistors) 34 Annex G-11 (Capacitors and RC units) 35 Annex G-12 (Optocouplers) 36 Annex G-13 (Printed boards) 37 Annex G-14 (Coatings on component terminals) 38 Annex G-15 (Pressurized liquid filled components or LFC assemblies) 39 Annex G-16 (IC that includes a capacitor discharge function (ICX) 40 Annex J-1 41 Annex J-2 (Type tests) 42 Annex J-3 (Testing during manufacturing) 43 Annex K-2 (Components of the safety interlock safeguard mechanism 44 Annex K-5 (Fail-safe) 45 Annex K-6 (Mechanically operated safety interlocks) 46 Annex K-7 (Interlock circuit isolation) 47 Annex L-5 (Three-phase equipment) 48 Annex M-7 (Risk of explosion from lead acid and NiCd batteries) 49 Annex M-8 Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte" 50 Annex R (Limited short-circuit test) 51 Annex U (""Mechanical strength of CRTs and protection against the effects of implosion 52 Annex Y-2 (Resistance to UV radiation) 53 Annex Y-4 (Gaskets) 54 Annex G-6 (Wire insulation)

346

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

All

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	22500	-
9.2(Workmanship & Finish)	-	22500	-
9.3(Workmanship & Finish)	-	22500	-
11.1(Dimensions - Height)	-	22500	-
11.1(Dimensions - Width)	-	22500	-
11.1(Dimensions - Thickness)	-	22500	-
11.1(Dimensions - Variation in thickness)	-	22500	-
11.1(Dimensions - Squareness)	-	22500	-
11.12(End immersion test)	-	22500	-
11.13(Knife Test)	-	22500	-
11.14(Glue Adhesion Test)	-	22500	-
4(GRADE)	-	22500	-
4(TYPE)	-	0	-
5(SIZES)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	0	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	0	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	0	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	0	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	0	-
9.1(WORKMANSHIP AND FINISH)	-	22500	-
9.2(WORKMANSHIP AND FINISH)	-	22500	-
9.3(WORKMANSHIP AND FINISH)	-	22500	-
11.1(Dimensions and Squareness Test)	-	22500	-
11.1(Dimensions and Squareness Test)	-	22500	-
11.1(Dimensions and Squareness Test)	-	22500	-
11.1(Dimensions and Squareness Test)	-	22500	-
11.1(Dimensions and Squareness Test)	-	22500	-
11.2(General Flatness Test)	-	22500	-
11.2(General Flatness Test)	-	22500	-
11.3(Local Planeness Test)	-	22500	-
11.2(General Flatness Test)	-	22500	-
11.4(Impact Indentation Test)	-	22500	-
11.4(Impact Indentation Test)	-	22500	-
11.5(Flexure Test)	-	22500	-
11.5(Flexure Test)	-	22500	-
11.6(Edge Loading Test)	-	22500	-
11.6(Edge Loading Test)	-	22500	-
11.6(Edge Loading Test)	-	22500	-
11.6(Edge Loading Test)	-	22500	-
11.7.1(Shock Resistance Test)	-	22500	-
11.7.2(Shock Resistance Test)	-	22500	-
11.8(Buckling Test)	-	22500	-
11.8(Buckling Test)	-	22500	-
11.8(Buckling Test)	-	22500	-
11.9.2(Slamming Test)	-	22500	-
11.9.3(Slamming Test)	-	22500	-
11.10(Misuse Test)	-	22500	-
11.11(Varying Humidity Test)	-	22500	-
11.11(Varying Humidity Test)	-	22500	-
11.12(End Immersion Test)	-	22500	-
11.13(Knife Test)	-	22500	-
11.14(Glue Adhesion Test)	-	22500	-
11.15(Screw Withdrawal Resistance Test)	-	22500	-
11.15(Screw Withdrawal Resistance Test)	-	22500	-
Clause 4.2(grades specified)	-	0	-
Clause 5(SIZES)	-	0	-
Clause 6.1.1(species of timber)	-	0	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	22500	-
Clause 6.2.1(Plywood)	-	0	-
Clause 6.2.2(Decorative plywood)	-	0	-
Clause 6.3(Cross-Bands)	-	0	-
Clause 6.4.1(Commercial Face Veneers)	-	0	-
Clause 6.4.2(Decorative Face Veneers)	-	0	-
Clause 6.6.1(Adhesives)	-	0	-
Clause 6.7(Particle Board)	-	0	-
Clause 6.8(Medium density fibre board)	-	0	-
Clause 6.9(Alternative Materials)	-	0	-
Clause 7.1(Blockboard Core)	-	0	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	0	-
Clause 7.3(Stiles and Rails)	-	0	-
Clause 7.4(Levelling)	-	0	-
Clause 7.5(Face Panel)	-	0	-
Clause 7.6(Lipping)	-	0	-
Clause 7.7(Rebating)	-	0	-
Clause 7.8(Opening for Glazing)	-	0	-
Clause 7.9(Venetian)	-	0	-
Clause 8.1(Locks)	-	0	-
Clause 9(WORKMANSHIP AND FINISH)	-	22500	-
Clause 10.1(Classification of Tests)	-	0	-
Clause 11.1(Dimensions and Squareness Test)	-	22500	-
Clause 11.2(General Flatness Test)	-	22500	-
Clause 11.3(Local Planeness Test)	-	22500	-
Clause 11.4(Impact Indentation Test)	-	22500	-
Clause 11.5(Flexure Test)	-	22500	-
Clause 11.6(Edge Loading Test)	-	22500	-
Clause 11.7(Shock Resistance Test)	-	22500	-
Clause 11.8(Buckling Resistance Test)	-	22500	-
Clause 11.9(Slamming Test)	-	22500	-
Clause 11.10(Misuse Test)	-	22500	-
Clause 11.11(Varying Humidity Test)	-	22500	-
Clause 11.12(End Immersion Test)	-	22500	-
Clause 11.13(Knife Test)	-	22500	-
Clause 11.14(Glue Adhesion Test)	-	22500	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	22500	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-
Clause 14(Marking)	-	0	-
4(Grade, Type and Construction)	-	0	-
5(Sizes and Thickness)	-	22500	-
6.1(Timber)	-	0	-
6.2(Plywood for flush door shutter)	-	0	-
6.3(Cross-Bands )	-	0	-
6.4.1(Commercial Face Veneers)	-	0	-
6.4.2(Decorative face veneers)	-	0	-
6.6(Adhesives)	-	0	-
6.7(Particle Board)	-	0	-
6.8(Medium Density Fibre)	-	0	-
6.9(Alternative Materials)	-	0	-
7(Construction)	-	0	-
8.1(Locks)	-	0	-
8.2(Other Fittings)	-	0	-
9(Workmanship and Finish)	-	22500	-
10(Tests)	-	22500	-
11.1(Dimensions and Squareness Test)	-	22500	-
11.2(General Flatness Test)	-	22500	-
11.3(Local Planeness Test)	-	22500	-
11.4(Impact Indentation Test)	-	22500	-
11.5(Flexure Test)	-	22500	-
11.6(Edge Loading Test)	-	22500	-
11.7(Shock Resistance Test)	-	22500	-
11.8(Buckling Resistance Test)	-	22500	-
11.9(Slamming Test)	-	22500	-
11.1(Misuse Test)	-	22500	-
11.11(Varying Humidity Test)	-	22500	-
11.12(End Immersion Test)	-	22500	-
11.13(Knife Test)	-	22500	-
11.14(Glue Adhesion Test)	-	22500	-
11.15(Screw Withdrawal Resistance Test)	-	22500	-
14(Marking )	-	0	-
Cl-13(ADDITIONAL REQUIREMENTS FOR ECO MARK)	-	0	-

-
Included w.e.f 21.10.2026

347

PRESTO LABORATORIES PRIVATE LIMITED

8199006

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation ,Toxicity and similar hazards)	-	1000	5% discount on BIS sealed samples
31(Resistance to Rusting)	-	1000	5% discount on BIS sealed samples
30(Resistance to Heat & Fire)	-	1000	5% discount on BIS sealed samples
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	5% discount on BIS sealed samples
28(Screws & Connection)	-	1000	5% discount on BIS sealed samples
27(Provision For Earthing)	-	1000	5% discount on BIS sealed samples
26(Terminals For External Conductors)	-	500	5% discount on BIS sealed samples
25(Supply Connection & External Flexible Cables and Cords)	-	500	5% discount on BIS sealed samples
24(Component)	-	500	5% discount on BIS sealed samples
23(Internal wiring)	-	500	5% discount on BIS sealed samples
22(Construction)	-	2500	5% discount on BIS sealed samples
21(Mechanical strength)	-	500	5% discount on BIS sealed samples
20(Stability & Mechanical Hazards)	-	500	5% discount on BIS sealed samples
19(Abnormal Operation)	-	2000	5% discount on BIS sealed samples
18(Endurance)	-	500	5% discount on BIS sealed samples
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	500	5% discount on BIS sealed samples
16(Leakage Current and Electric Strength)	-	1500	5% discount on BIS sealed samples
15(Moisture Resistance)	-	2000	5% discount on BIS sealed samples
14(Transient Over Voltage)	-	500	5% discount on BIS sealed samples
13(Leakage Current and Electric Strength at Operating Temperature)	-	1500	5% discount on BIS sealed samples
11(Temperature Rise/Heating)	-	2000	5% discount on BIS sealed samples
10(Power Input & Current)	-	1000	5% discount on BIS sealed samples
9(Starting Of Motor Operated Appliances)	-	500	5% discount on BIS sealed samples
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	500	5% discount on BIS sealed samples
7(Marking/ Marking & Instructions)	-	500	5% discount on BIS sealed samples
6(Classification)	-	500	5% discount on BIS sealed samples

21 Aug, 2029

-
-

348

Sleen India Biz venture Private Limited, Agra

9139736

IS 3735 (2025)

Canvas Shoes Rubber Sole - Specification (Third Revision )

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1.1, Table 1 (i)("Breaking load in N, Min, (Overlayer) a) warp)	-	500	-
Cl-5.1.1, Table 1 (i)("Breaking load in N, Min, (Overlayer) (b) Weft")	-	500	-
Cl-5.1.1, Table 1 (i)("Breaking load in N, Min, (Overlayer) © Ends/dm")	-	500	-
Cl-5.1.1, Table 1 (i)("Breaking load in N, Min, (Overlayer) (d) Picks/dm")	-	500	-
Cl-5.1.1, Table 1 (ii)("Breaking load in N, Min, (Inner layer) a) warp ")	-	500	-
Cl-5.1.1, Table 1 (ii)("Breaking load in N, Min, (Inner layer) (b) Weft")	-	500	-
Cl-5.1.1, Table 1 (ii)("Breaking load in N, Min, (Inner layer) © Ends/dm")	-	500	-
Cl-5.1.1, Table 1 (ii)("Breaking load in N, Min, (Inner layer) (d) Picks/dm")	-	500	-
Cl-5.1.1.1(Colour fastness)	-	750	-
Cl-5.1.1.2(Fastness to mechanical washing (mild))	-	500	-
Cl-5.1.2(Binding material)	-	300	-
Cl-5.1.2.1(Colour fastness to day light (cotton tapes))	-	800	-
Cl-5.1.2.1(Color Fastness to mechanical washing)	-	500	-
Cl-5.1.2.1(Freedom from sulphur dyes)	-	500	-
Cl-5.1.3(Eyelets (collar diameter))	-	300	-
Cl-5.1.3(Eyelets (wall thickness ))	-	300	-
Cl-5.1.4(Laces)	-	499.99	-
Cl-5.1.5, Table-2 (i)(Relative density, Max)	-	500	-
Cl-5.1.5, Table-2 (ii)(Hardness, IRHD)	-	500	-
Cl-5.1.5, Table-2 (iii)("Flexing resistance, a) Initial crack, Min")	-	500	-
Cl-5.1.5, Table-2 (iii)("Flexing resistance, b) Cut growth percent, Max")	-	500	-
Cl-5.1.5, Table-2 (iv)(Change in initial hardness after accelerated ageing for 24 h at 100 ℃ ± 1 ℃)	-	500	-
Cl-5.1.5, Table-2 (v)(Tensile strength in N, Min)	-	500	-
Cl-5.1.5, Table-2 (vi)(Elongation at break, in percent Min)	-	500	-
Cl-5.1.5.2, Table 3 (ii)(Ageing (Elongation at break))	-	500	-
Cl-5.2(Shape, Design and Fittings)	-	300	-
Cl-5.4(Adhesion Test)	-	500	-
Cl-5.5(Consolidation Test)	-	500	-
Cl-5.6(Abrasion Resistance)	-	500	-
Cl-5.7(Slip Resistance)	-	1000	-
Cl-5.8(Seam Strength)	-	500	-
Cl-5.9(Aromatic Amines Released from Azo dyes)	-	2000	-
Cl-5.10(Mass)	-	500	-
Cl-6.2(Marking)	-	0	-
Cl-5.1.5.2, Table 3 (i)(Ageing (Tensile strength ))	-	500	-

-
Included w.e.f-22.10.2026

349

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 3382 (1965)

Specification for stainless steel milk pipes and - Fittings

All Grade

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(MATERIALS)	-	0	-
3.1(MATERIALS)	-	0	-
3.2.1.1(The expanded type male part)	-	15000	-
3.2.1.2(The expanded type liner)	-	15000	-
3.3(Nut)	-	15000	-
3.4(Spanner)	-	15000	-
3.5(External Thread, Internal Thread)	-	15000	-
3.6(Seal)	-	15000	-
3.7.1(Expanded Tyie Bends and Tees)	-	15000	-
3.7.2(Welded Type Bends and Tees)	-	15000	-
3.8(Polish)	-	15000	-
2.1(Shape and Dimensions)	-	15000	-
2.3(Joint)	-	0	-
2.4(Serrations)	-	0	-
2.5(Ratchet)	-	0	-
2.6(Finger Loops)	-	0	-
3(Material)	-	0	-
4(Workmanship and Finish)	-	0	-
5(Heat treatment)	-	0	-
6.1(Performance of Tips and Jaws)	-	0	-
6.2(Flexibility)	-	0	-
6.3(Corrosion Resistance)	-	22500	-
7(Marking)	-	0	-
2.1(MATERIALS)	-	0	-
3.1(MATERIALS)	-	0	-
3.2.1.1(The expanded type male part)	-	0	-
3.2.1.2(The expanded type liner)	-	0	-
3.3(Nut)	-	0	-
3.4(Spanner)	-	0	-
3.5(External Thread, Internal Thread)	-	0	-
3.6(Seal)	-	0	-
3.7.1(Expanded Tyie Bends and Tees)	-	0	-
3.7.2(Welded Type Bends and Tees)	-	0	-
3.8(Polish)	-	0	-
2.1(Shape and Dimensions)	-	0	-
2.3(Joint)	-	0	-
2.4(Serrations)	-	0	-
2.5(Ratchet)	-	0	-
2.6(Finger Loops)	-	0	-
3(Material)	-	0	-
4(Workmanship and Finish)	-	0	-
5(Heat treatment)	-	0	-
6.1(Performance of Tips and Jaws)	-	0	-
6.2(Flexibility)	-	0	-
6.3(Corrosion Resistance)	-	0	-
7(Marking)	-	0	-

-
Included w.e.f. 25.09.2026

350

Stellar Test House, Noida

8171606

IS 302 : PART 1 (DC supplied/ battery-operated vacuum cleaners)

DC supplied/ battery-operated vacuum cleaners

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32.2(Radiation, toxicity and similar hazards, is 302-1)	-	500	-
32.1(Radiation, toxicity and similar hazards, is 302-1)	-	500	-
27.6(Provision for Earthing, IS 302-1)	-	500	-
27.4(Provision for Earthing, IS 302-1)	-	500	-
27.3(Provision for Earthing, IS 302-1)	-	500	-
27.2(Provision for Earthing, IS 302-1)	-	500	-
25.24(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.23(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.20(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.10(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.5(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.4(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.3(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.2(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.1(Supply connection and external flexible cords, IS 302-1)	-	500	-
23.10(Internal Wiring, IS 302-1)	-	500	-
23.9(Internal Wiring, IS 302-1)	-	500	-
23.8(Internal Wiring, IS 302-1)	-	500	-
23.7(Internal Wiring, IS 302-1)	-	500	-
23.6(Internal Wiring, IS 302-1)	-	500	-
23.4(Internal Wiring, IS 302-1)	-	500	-
23.2(Internal Wiring, IS 302-1)	-	500	-
22.61(Construction, IS 302-1)	-	500	-
22.60(Construction, IS 302-1)	-	500	-
22.59(Construction, IS 302-1)	-	500	-
22.58(Construction, IS 302-1)	-	500	-
22.55(Construction, IS 302-1)	-	500	-
22.54(Construction, IS 302-1)	-	500	-
22.49(Construction, IS 302-1)	-	500	-
22.44(Construction, IS 302-1)	-	500	-
22.43(Construction, IS 302-1)	-	500	-
22.43(Construction, IS 302-1)	-	500	-
22.41(Construction, IS 302-1)	-	500	-
22.40(Construction, IS 302-1)	-	500	-
22.38(Construction, IS 302-1)	-	500	-
22.37(Construction, IS 302-1)	-	500	-
22.36(Construction, IS 302-1)	-	500	-
22.35(Construction, IS 302-1)	-	500	-
22.34(Construction, IS 302-1)	-	500	-
22.31(Construction, IS 302-1)	-	500	-
22.28(Construction, IS 302-1)	-	500	-
22.25(Construction, IS 302-1)	-	500	-
22.24(Construction, IS 302-1)	-	500	-
22.22(Construction, IS 302-1)	-	500	-
22.21(Construction, IS 302-1)	-	500	-
22.19(Construction, IS 302-1)	-	500	-
22.18(Construction, IS 302-1)	-	500	-
22.15(Construction, IS 302-1)	-	500	-
22.14(Construction, IS 302-1)	-	500	-
22.12(Construction, IS 302-1)	-	500	-
22.10(Construction, IS 302-1)	-	500	-
22.9(Construction, IS 302-1)	-	500	-
22.7(Construction, IS 302-1)	-	500	-
19.17(Abnormal Operation, IS 302-1)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	500	-
19.9(Abnormal Operation, IS 302-1)	-	500	-
19.8(Abnormal Operation, IS 302-1)	-	500	-
19.7(Abnormal Operation, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
6(Classification- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-2-15)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.1O(Marking- IS 302-1)	-	500	-
7.9(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.5(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
B.22.5(Construction, IS 302-1)	-	500	-
B.22.4(Construction, IS 302-1)	-	500	-
22.3(Construction, IS 302-1)	-	500	-
22.2(Construction, IS 302-1)	-	500	-
28.1(Screws and connections)	-	500	-
27.5(Provision for Earthing, IS 302-1)	-	500	-
26.5(Terminals for external conductors)	-	500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
22.42(Construction)	-	500	-
22.32(Construction, IS 302-1)	-	500	-
22.16(Construction)	-	500	-
22.11(Construction, IS 302-1)	-	500	-
22.6(Construction, IS 302-1)	-	500	-
22.5(Construction)	-	500	-
21.3(Mechanical Strength, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	-
19.17(Abnormal Operation, IS 302-1)	-	500	-
15.2(Moisture resistance)	-	500	-
Annex D(Thermal motor protectors)	-	500	-
Annex C(Ageing test on motors)	-	500	-
A.2(Earth continuity test)	-	500	-
7(Marking and instructions)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
9(Starting of motor operation test requirements and tests)	-	500	-
10.1(Power input)	-	500	-
10.2(Current input)	-	500	-
11.1(General)	-	500	-
11.2(General)	-	500	-
11.3(Heating)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
14(Transient Over Voltages)	-	500	-
15.0(Moisture resistance)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.2(Spillage Test)	-	500	-
15.3(Humidity Test)	-	500	-
16.0(General)	-	500	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
18(Endurance)	-	500	-
19(Abnormal Operation)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
22.1(Construction, IS 302-1)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
24(Components)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26(Terminals for external conductors)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	500	-
28(Screw test and connections)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
30.1(Ball pressure test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.2(Needle Flame Test)	-	500	-
31(Resistance to Rusting)	-	500	-
32.1(Radiation Toxicity and Similar Hazards)	-	500	-
4(General requirement)	-	500	-
16(Leakage current and electric strength)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
18(Endurance)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
11.4(Heating appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.6(Combined appliances)	-	500	-
11.7(Duration corresponding)	-	500	-
11.8(Temperature rise)	-	500	-
12(Charging of metal-ion batteries)	-	500	-

26 Sep, 2028

-
Included w.e.f 07.10.2026 Exclusion: 19.11.4.1-19.11.4.7(EMI/EMC)

351

BIS, Northern Regional Laboratory (NRL)

None

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Inputting of text)	-
5.2 (Message Readability)	-
6 (Marking)	-
"Cl.6.1 " (Marking)	-
"Cl.6.2 " (BIS Certification Marking)	-
4 (Requirements)	-
5 (Tests)	-
6 (Marking)	-

-
-

352

BIS, Northern Regional Laboratory (NRL)

None

IS 9537 : Part 4 (1983)

Specification for conduits for electrical installations: Part 4 pliable self - Recovering conduits of insulating materials

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Marking, IS 9537-4)	-
6.1 (Marking, IS 9537-4)	-
6.1 (Marking, IS 9537-4)	-
6.1 (Marking, IS 9537-4)	-
6.2 (Marking, IS 9537-4)	-
6.2.1 (Marking, IS 9537-4)	-
6.3 (Marking, Cl. 6.4 of IS 9537-1)	-
6.4 (Marking, IS 9537-4)	-
7.1 (Dimensions, (Minimum outside Diameter), IS 9537-4)	-
7.1 (Dimensions (Maximum outside Diameter), IS 9537-4)	-
7.3.3 (Uniformity of wall thickness, IS 9537-4)	-
8.1 (Construction, Cl. 8 of IS 9537-1)	-
9.2 (Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-
9.2 (Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-
9.3 (Mechanical Properties (Compression Test), IS 9537-4)	-
9.4 (Mechanical Properties (Impact Test), Cl. 9.4 of IS 9537-1)	-
9.5 (Mechanical Properties (Collapse Test), IS 9537-4)	-
10 (Resistance to heat)	-
11 (Resistance to burning, Cl. 11 of IS 9537-1)	-
12 (Electrical Strength, Cl. 12.1.1 of IS 9537-1)	-
12 (Insulation Resistance, Cl. 12.1.2 of IS 9537-1)	-

-
-

353

ACCURATE TEST SOLUTIONS LLP

8192806

IS 3419 (1988)

Specification for fittings for rigid non - Metallic (Second Revision)

All

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8 & 5(Visual Examination -IS:3419)	-	500	-
6.2 & 9.1- Table-1, ii(Inside Diameter of Collar for Slip type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-1, iii(Inside Diameter of Ridge for Slip type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-1, iv(Minimum overall length for Slip type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-1, v(Minimum wall thickness for Slip type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-2, ii(Inside Diameter of Collar for Socketed type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-2, iii(Inside Diameter of Ridge for Socketed type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-2, iv(Minimum overall length (a) for Socketed type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-2, v(Minimum overall length (l) for Socketed type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-2, vi(Minimum wall thickness for Socketed type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-3, ii(Inside Diameter of Collar(d6) for Clamp type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-3, iii(Inside Diameter of Collar (d5) for Clamp type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-3, iv(Inside Diameter of Ridge for Clamp type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-3, iv(Minimum length for Clamp type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-3, vi(Minimum wall thickness for Clamp type cuplers -IS:3419)	-	0	-
6.2 & 9.1- Table-4, ii(Outside Dameter of Normal type bend -IS:3419)	-	0	-
6.2 & 9.1- Table-4, iii(Minimum Inside Diameter of Normal Type Bend -IS:3419)	-	0	-
6.2 & 9.1- Table-4, iv(Radious(R) of Normal Type Bend -IS:3419)	-	0	-
6.2 & 9.1- Table-4, v(Length (l1) of Normal Type Bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, ii(Outside Dameter of Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, iii(Minimum Inside Diameter of Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, iv(Inside Diameter of collar for Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, v(R- for Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, vi(Y- for Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-5, vii(l2- for Slip type cupling bend -IS:3419)	-	0	-
6.2 & 9.1- Table-6, ii(Inside Diameter of collar for Normal type Elbows -IS:3419)	-	0	-
6.2 & 9.1- Table-6, iii(Length (l) of Normal Type Elbows -IS:3419)	-	0	-
6.2 & 9.1- Table-6, iv(Radious(r) of Normal Type Elbows -IS:3419)	-	0	-
6.2 & 9.1- Table-6, v(Minimum wall thicknes of Elbows -IS:3419)	-	0	-
6.2 & 9.1- Table-7, ii(Inside Diameter of Collear for Normal type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-7, iii(Length (l) of Normal type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-7, iv(Radious(r) of Normal type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-7, v( Minimum wall thicknes of Normal type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-8, ii(Inside Diameter of Collear for socketed type Tees - IS:3419)	-	0	-
6.2 & 9.1- Table-8, iii(a - of socketed type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-8, iv(l - of socketed type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-8, v(Minimum wall thicknes of socketed type Tees -IS:3419)	-	0	-
6.2 & 9.1- Table-9, ii(B - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, iii(C - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, iv(D - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, v(E - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, vi(F(Max) - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, vii(F(Min) - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, viii(G - of spout Type Circular Boxes -IS:3419)	-	0	-
6.2 & 9.1- Table-9, ix(t - of spout Type Circular Boxes -IS:3419)	-	0	-
10(Resistance to Heat -IS:3419)	-	0	-
11(Resistance to Burning - IS 3419)	-	0	-
12(Moisture Absorption - IS 3419)	-	0	-
13.2 &13.3(Resistance to chemival action in Acid solution - IS 3419)	-	0	-
13.2 &13.3(Resistance to chemival action in Alkaline solution - IS 3419)	-	0	-
14.1(Copper Test - IS 3419)	-	0	-
15, 15.3(Resistance to Oil - IS 3419)	-	0	-
15,15.4(Resistance to Oil - IS 3419)	-	0	-
16- Appendix-A(Resistance to Impact -IS 3419)	-	500	-
17.2(Electric Strength - IS 3419)	-	500	-
17.3(Insulation Resistance - IS 3419)	-	1000	-
Cl.7.1(Marking)	-	500	-
Cl.7.1(Construction)	-	0	-
Cl. 5(Construction)	-	0	-
Cl. 5(Construction)	-	0	-
Cl.5.3(Construction)	-	0	-
Cl.5.3(Construction)	-	500	-
(Cl.6) Table 9(Dimensions A)	-	0	-
(Cl.6) Table 9(Dimensions B)	-	0	-
(Cl.6) Table 9(Dimensions C)	-	0	-
(Cl.6) Table 9(Dimensions D)	-	0	-
(Cl.6) Table 9(Dimensions E)	-	0	-
(Cl.6) Table 9(Dimensions F)	-	0	-
(Cl.6) Table 9(Dimensions G)	-	0	-
(Cl.6) Table 9(Dimensions t)	-	2000	-
Cl. 10(Resistance to Heat)	-	1000	-
Cl. 11(Resistance to Burning)	-	1000	-
Cl. 12(Moisture Absorption Test)	-	1000	-
Cl.13(Resistance to Chemical Action)	-	500	-
Cl.14(Copper Test)	-	1000	-
Cl. 15(Resistance to Oil)	-	1000	-
Cl. 15(Resistance to Oil)	-	0	-

08 Dec, 2028

-
Included w.e.f 25.09.2026

354

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 15138 (2024)

Textiles - Jute Bags For Packing 50 Kg Sugar - Specification (second revision)

Type A, B, C, D & E

6200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4.1(Febric)	-	300	Testing charges for cl. no. 4.1 Fabric (Mass per unit area of fabric) are Rs. 300/-.
As per Clause 4.1.1(Febric)	-	200	Testing charges for cl. no. 4.1 Fabric (Construction) are Rs. 200/-.
As per Clause 4.2(Seam)	-	300	Testing charges for cl. no. 4.2 Seam (Seam -Type of stitch & No. of stitches per 10 cm) are Rs. 300/-.
As per Clause 4.3(Hemming at the mouth)	-	200	Testing charges for cl. no. 4.3 Hemming at mouth are Rs. 200/-.
As per Clause 4.4(Freedom from defects)	-	300	Testing charges for cl. no. 4.5 Thickness of liner & Overall migration of liner (Type - C & Type - E) are Rs. 800/-
As per Clause 5,5.1,5.2(Table 1)(i). Dimension,(a.-outside length) (b.-outside width))	-	500	-
As per Clause 5,5.1,5.2(Table 1)(ii). Ends/dm)	-	600	Testing charges for Cl. 5.1 Table - 1 (i), (ii) Ends / Picks / dm are Rs. 600/-.
As per Clause 5,5.1,5.2(Table 1)(iii). Picks/dm)	-	0	Testing charges for Cl. 5.1 Table - 1 (i), (ii) Ends / Picks / dm are Rs. 600/- already mentioned above.
As per Clause 5,5.1,5.2(Table 1)(iv). Corrected mass per bags)	-	300	-
As per Clause 5,5.1,5.2(Table 1)(v). Average breaking load of sacking(a) warpway (b)weftway)	-	800	-
As per Clause 5,5.1,5.2(Table 1)(vi). Average breaking load of seam(a) warpway (b)weftway)	-	800	-
As per Clause 5,5.1,5.2(Table 1)(vii).Moisture regain)	-	600	Testing Charges for Cl. no. 5.1 Table - 1 (vii) Moisture regain and Contract Moisture regain are Rs. 300/- for each.
As per Clause 5,5.1,5.2(Table 1)(viii).oil content)	-	500	-

31 Dec, 2026

-
Included w.e.f 08.10.2026

355

KC INDIA TEST LABORATORIES LLP, GHAZIABAD

9140406

IS 10322 (Part 5/Sec 1) (2026)

Luminaires Part 5: Particular requirements Section 1: Fixed general purpose luminaires (Second Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-1.4(General test requirements)	-	2000	NIL
Cl-1.6(Marking)	-	2000	NIL
Cl-1.7(Construction)	-	2000	Cl.7.24 is in exclusion
Cl-1.8(Creepage distances and clearances)	-	5000	NIL
Cl-1.9(Provision for earthing)	-	5000	NIL
Cl-1.10(Terminals)	-	2000	NIL
Cl-1.11(External and internal wiring)	-	2000	NIL
Cl-1.12(Protection against electric shock)	-	2000	NIL
Cl-1.12(Protection against electric shock)	-	2000	NIL
Cl-1.13(Endurance tests and thermal tests)	-	5000	NIL
Cl-1.14(Resistance to dust, solid objects and moistur)	-	5000	NIL
Cl-1.15(" Insulation resistance and electric strength, touch current and protective conductor current")	-	7000	NIL
Cl-1.16(Resistance to heat, fire and tracking)	-	5000	NIL
Cl-1.4(General test requirements)	-	2000	NIL
Cl-1.6(Marking)	-	2000	NIL
Cl-1.7(Construction)	-	2000	NIL
Cl-1.8(Creepage distances and clearances)	-	5000	NIL
Cl-1.9(Provision for earthing)	-	5000	NIL
Cl-1.10(Terminals)	-	2000	NIL
Cl-1.11(External and internal wiring)	-	2000	NIL
Cl-1.12(Protection against electric shock)	-	2000	NIL
Cl-1.12(Protection against electric shock)	-	2000	NIL
Cl-1.13(Endurance tests and thermal tests)	-	5000	NIL
Cl-1.14(Resistance to dust, solid objects and moistur)	-	5000	NIL
Cl-1.15(" Insulation resistance and electric strength, touch current and protective conductor current")	-	7000	NIL
Cl-1.16(Resistance to heat, fire and tracking)	-	5000	NIL

06 Jun, 2027

-
included w.e.f 22.10.2026. exclusion: Cl-1.7 (Construction)

356

THE NATIONAL SMALL INDUSTRIES CORPORATION LIMITED, TECHNICAL SERVICES CENTRE - NSIC, Rajpura

9111924

IS 302 : PART 1 (Appliances for Heating Liquids)

Appliances for Heating Liquids

Upto 6KW, 300V, single phase

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1)	-	100	20% discount to BIS on testing charges
7(Marking and instructions)	-	10	20% discount to BIS on testing charges
7.1(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
7.1(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
7.1(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
7.1(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
7.1(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
7.1(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
7.1(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
27.6(Provision for Earthing, IS 302-1)	-	250	20% discount to BIS on testing charges
27.4(Provision for Earthing, IS 302-1)	-	250	20% discount to BIS on testing charges
27.3(Provision for Earthing, IS 302-1)	-	250	20% discount to BIS on testing charges
27.2(Provision for Earthing, IS 302-1)	-	250	20% discount to BIS on testing charges
25.24(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.23(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.20(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.10(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.5(Supply connection and external flexible cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.4(Supply connection and external flexible cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.3(Supply connection and external flexible cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.2(Supply connection and external flexible cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.1(Supply connection and external flexible cords, IS 302-1)	-	30	20% discount to BIS on testing charges
23.10(Internal Wiring, IS 302-1)	-	50	20% discount to BIS on testing charges
23.9(Internal Wiring, IS 302-1)	-	50	20% discount to BIS on testing charges
23.8(Internal Wiring, IS 302-1)	-	50	20% discount to BIS on testing charges
23.7(Internal Wiring, IS 302-1)	-	50	20% discount to BIS on testing charges
23.6(Internal Wiring, IS 302-1)	-	50	20% discount to BIS on testing charges
23.4(Internal Wiring, IS 302-1)	-	50	20% discount to BIS on testing charges
23.2(Internal Wiring, IS 302-1)	-	50	20% discount to BIS on testing charges
22.61(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.60(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.59(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.58(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.55(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.54(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.49(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.44(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.43(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.43(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.41(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.40(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.38(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.37(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.36(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.35(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.34(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.31(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.28(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.25(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.24(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.22(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.21(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.19(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.18(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.15(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.14(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.12(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.10(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.9(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.7(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
19.17(Abnormal Operation, IS 302-1)	-	100	20% discount to BIS on testing charges
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	20% discount to BIS on testing charges
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	20% discount to BIS on testing charges
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	100	20% discount to BIS on testing charges
19.9(Abnormal Operation, IS 302-1)	-	100	20% discount to BIS on testing charges
19.8(Abnormal Operation, IS 302-1)	-	100	20% discount to BIS on testing charges
19.7(Abnormal Operation, IS 302-1)	-	100	20% discount to BIS on testing charges
11(Heating, IS 302-1)	-	100	20% discount to BIS on testing charges
11(Heating, IS 302-1, Table -3)	-	100	20% discount to BIS on testing charges
11(Heating, IS 302-1, Table -3)	-	100	20% discount to BIS on testing charges
11(Heating, IS 302-1, Table -3)	-	100	20% discount to BIS on testing charges
11(Heating, IS 302-1, Table -3)	-	100	20% discount to BIS on testing charges
11(Heating, IS 302-1, Table -3)	-	100	20% discount to BIS on testing charges
7.15(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
7.13(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
7.12(Marking- IS 302-2-15)	-	10	20% discount to BIS on testing charges
7.11(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
7.1O(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
7.9(Marking- IS 302-1)	-	5	20% discount to BIS on testing charges
7.8(Marking- IS 302-1)	-	5	20% discount to BIS on testing charges
7.7(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
7.6(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
7.5(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
7.4(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
7.3(Marking- IS 302-1)	-	10	20% discount to BIS on testing charges
B.22.5(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
B.22.4(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.3(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.2(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
28.1(Screws and connections)	-	200	20% discount to BIS on testing charges
27.5(Provision for Earthing, IS 302-1)	-	250	20% discount to BIS on testing charges
26.5(Terminals for external conductors)	-	200	20% discount to BIS on testing charges
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
25.6(Supply connection and external flexible cords, IS 302-1)	-	30	20% discount to BIS on testing charges
23.3(Internal Wiring, IS 302-1)	-	50	20% discount to BIS on testing charges
22.42(Construction)	-	15	20% discount to BIS on testing charges
22.32(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.11(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.6(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
22.5(Construction)	-	15	20% discount to BIS on testing charges
21.3(Mechanical Strength, IS 302-1)	-	200	20% discount to BIS on testing charges
21.2(Mechanical Strength, IS 302-1)	-	200	20% discount to BIS on testing charges
20.2(Stability & Mechanical Hazards, IS 302-1)	-	200	20% discount to BIS on testing charges
19.17(Abnormal Operation, IS 302-1)	-	100	20% discount to BIS on testing charges
15.2(Moisture resistance)	-	300	20% discount to BIS on testing charges
8.1.1(Protection against live parts in all positions)	-	240	20% discount to BIS on testing charges
8.1.2(Protection against live parts in openings)	-	240	20% discount to BIS on testing charges
8.1.3(Protection against live parts in visible glowing heating elements)	-	240	20% discount to BIS on testing charges
8.1.4(Protection against live parts against protective impedance)	-	240	20% discount to BIS on testing charges
9(Starting of motor operation test requirements and tests)	-	100	20% discount to BIS on testing charges
10.1(Power input)	-	600	20% discount to BIS on testing charges
10.2(Current input)	-	600	20% discount to BIS on testing charges
11.1(General)	-	100	20% discount to BIS on testing charges
11.2(General)	-	100	20% discount to BIS on testing charges
11.3(Heating)	-	100	20% discount to BIS on testing charges
13(Leakage current and electric strength at operating temperature)	-	500	20% discount to BIS on testing charges
13.2(Leakage current at operating temperature)	-	500	20% discount to BIS on testing charges
13.3(Electric Strength at operating temperature)	-	500	20% discount to BIS on testing charges
14(Transient Over Voltages)	-	500	20% discount to BIS on testing charges
15.0(Moisture resistance)	-	300	20% discount to BIS on testing charges
15.1(Ingress Protection test other than IPX0 (IP test))	-	300	20% discount to BIS on testing charges
15.2(Spillage Test)	-	300	20% discount to BIS on testing charges
15.3(Humidity Test)	-	300	20% discount to BIS on testing charges
16.0(General)	-	300	20% discount to BIS on testing charges
16.1(General)	-	300	20% discount to BIS on testing charges
16.2(Leakage Current (after Clause 15))	-	300	20% discount to BIS on testing charges
16.3(Electric Strength (after clause 15 and 16.2))	-	300	20% discount to BIS on testing charges
17(Over Load Protection of Transformers and associated circuits)	-	200	20% discount to BIS on testing charges
18(Endurance)	-	200	20% discount to BIS on testing charges
19(Abnormal Operation)	-	100	20% discount to BIS on testing charges
20.1(Stability & Mechanical Hazards, IS 302-1)	-	200	20% discount to BIS on testing charges
21.1(Mechanical Strength, IS 302-1)	-	200	20% discount to BIS on testing charges
22.1(Construction, IS 302-1)	-	15	20% discount to BIS on testing charges
23.1(Internal Wiring, IS 302-1)	-	50	20% discount to BIS on testing charges
24(Components)	-	1160	20% discount to BIS on testing charges
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	30	20% discount to BIS on testing charges
26(Terminals for external conductors)	-	200	20% discount to BIS on testing charges
27.1(Provision for Earthing, IS 302-1)	-	250	20% discount to BIS on testing charges
28(Screw test and connections)	-	200	20% discount to BIS on testing charges
29(clearance, creepage distances and solid insulation)	-	400	20% discount to BIS on testing charges
30.1(Ball pressure test)	-	150	20% discount to BIS on testing charges
30.2(Glow Wire Test)	-	150	20% discount to BIS on testing charges
30.2(Glow Wire Test)	-	150	20% discount to BIS on testing charges
30.2(Needle Flame Test)	-	150	20% discount to BIS on testing charges
31(Resistance to Rusting)	-	200	20% discount to BIS on testing charges
4(General requirement)	-	50	20% discount to BIS on testing charges
4(General requirement)	-	50	20% discount to BIS on testing charges
16(Leakage current and electric strength)	-	300	20% discount to BIS on testing charges
17(Overload protection of transformers and associated circuits)	-	200	20% discount to BIS on testing charges
18(Endurance)	-	200	20% discount to BIS on testing charges
8.1.5(Live parts of built-in appliances)	-	240	20% discount to BIS on testing charges
11.4(Heating appliances)	-	100	20% discount to BIS on testing charges
11.5(Motor-operated appliances)	-	100	20% discount to BIS on testing charges
11.6(Combined appliances)	-	100	20% discount to BIS on testing charges
11.7(Duration corresponding)	-	100	20% discount to BIS on testing charges
11.8(Temperature rise)	-	100	20% discount to BIS on testing charges
12(Charging of metal-ion batteries)	-	500	20% discount to BIS on testing charges
22.16(Construction)	-	15	20% discount to BIS on testing charges
Annex D(Thermal motor protectors)	-	400	20% discount to BIS on testing charges
Annex C(Ageing test on motors)	-	400	20% discount to BIS on testing charges
A.2(Earth continuity test)	-	400	20% discount to BIS on testing charges

31 Dec, 2026

-
-

357

FHHL PRIVATE LIMITED, PUNE

7124016

IS 13334 (Part 1) (2025)

SKIMMED MILK POWDER - SPECIFICATION Part 1 Standard Grade

Part 1 Standard Grade

32600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Description (General))	-	100	-
Cl-4.2(Freedom from preservatives, neutralizers and adulterants)	-	0	-
Cl-4.3(Absence of extraneous matter, added colour & added flavour)	-	500	-
Cl-4.4(Limit of permitted food additives)	-	0	-
Cl-4.5(Flavour and Taste)	-	500	-
Cl-4.7(Sodium Content)	-	500	-
Cl-4.6 & 4.8, Table-1 (i)(Moisture, percent by mass, Max)	-	500	-
Cl-4.6 & 4.8, Table-1 (ii)(Milk protein in milk solids not fat, percent by mass, Min)	-	500	-
Cl-4.6 & 4.8, Table-1 (iii)(Milk fat, percent by mass, Max)	-	500	-
Cl-4.6 & 4.8, Table-1 (iv)(Insolubility index, ml, Max: a) Spray dried)	-	700	-
Cl-4.6 & 4.8, Table-1 (iv)(Insolubility index, ml, Max: b) Roller dried)	-	700	-
Cl-4.6 & 4.8, Table-1 (v)(Total ash (on moisture and fat free basis), percent by mass, Max)	-	500	-
Cl-4.6 & 4.8, Table-1 (vi)(Titratable acidity, ml of 0.1 N NaOH/10 g of solids not fat)	-	500	-
Cl-4.6 & 4.8, Table-1 (vii)(Scorched particles, mg, Max)	-	500	-
Cl-4.10(Metal Contaminants/other contaminants/ toxic substance)	-	0	-
Cl-4.10, Table-3 (i)(Lead, ppm, Max)	-	500	-
Cl-4.10, Table-3 (ii)(Arsenic, ppm, Max1))	-	500	-
Cl-4.10, Table-3 (iii)(Aflatoxin M1, ppb, Max)	-	2500	-
Cl-4.10, Table-3 (iv)(Melamine, ppm, Max)	-	1500	-
Cl-4.9(Pesticide residue, antibiotic and veterinary drug residues)	-	16500	-
Cl-4.6, Table-2 (i)(Aerobic plate count)	-	500	-
Cl-4.6, Table-2 (ii)(Coliform count)	-	500	-
Cl-4.6, Table-2 (iii)(Staphylococcus aureus)	-	500	-
Cl-4.6, Table-2 (iv)(Yeast and mould count)	-	500	-
Cl-4.6, Table-2 (v)(Salmonella spp.)	-	500	-
Cl-4.6, Table-2 (vi)(Listeria monocytogenes)	-	800	-
Cl-4.6, Table-2 (vii)(Bacillus cereus)	-	500	-
Cl-4.6, Table-2 (viii)(Sulphite reducing clostridia)	-	800	-
Cl-4.6, Table-2 (ix)(Escherichia coli)	-	500	-
Cl-4.11(Hygienic Conditions)	-	0	-
Cl-5.2(Marking)	-	0	-

31 Dec, 2026

-
included w.e.f 22.10.2026.

358

KC INDIA TEST LABORATORIES LLP, GHAZIABAD

9140406

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

Upto and including 810 sqmm

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	1000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl-6.1.1(chemical composition of high carbon steel)	-	1000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl-6.2(zinc used for galvanizing)	-	1000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl-7(Freedom From Defects)	-	1000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl-8.1(Wires-Nominal Sizes)	-	1000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	1000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl-9.1(Joint in Wires)	-	0	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl-9.2(Aluminium Wires)	-	0	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl-9.3(Galvanized Steel Wires)	-	0	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	5000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl-13.3(Conductor- Visual examination)	-	1000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	5000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	5000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	12000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	12000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl-13.4(Aluminium wires-Measurement of diameter)	-	2500	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl- 13.6(Aluminium wires -Breaking load test)	-	5000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl- 13.8(Aluminium wires- Wrapping test)	-	2000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	5000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	100	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl- 13.4(Steel wires- Measurement of diameter)	-	2500	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl- 13.6(Steel wires- Breaking load test)	-	2000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl- 13.7(Steel wires- Ductility test)	-	2000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl- 13.8(Steel wires- Wrapping test)	-	2000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl- 13.10(Steel wires- Galvanizing test)	-	2500	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl-13.7.1(Torsion Test)	-	2500	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl-13.7.2(Elongation Test)	-	2500	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl-11.1(Standard Length)	-	1000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)
Cl-11.2(Random Lengths)	-	1000	Type Test-Rs 18000 (Up to 100 sq mm), Rs 120000 (150 Sq mm to 200 sq mm), Rs 160000 (400 sq mm to 560 sq mm), Rs 200000 (Above 560 sq mm)

06 Jun, 2027

-
Included w.e.f. 07.10.2026 Exclusion: "Cl- 13.15, Corona Test Cl-13.16, Radio Interference voltage Test"

359

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 14549 (2026)

Hexaconazole, technical - Specification (first revision)

all

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description - IS 14549 : 2026)	-	500	-
3.2, Table 1 (i)(Hexaconazole Content - IS 14549 : 2026)	-	4000	-
3.2, Table 1 (ii)(Moisture Content - IS 6940 : 2025)	-	1500	-
3.2, Table 1 (iii)(Acidity (as H2SO4) - IS 6940 : 2025)	-	1200	-
3.2, Table 1 (iv)(Material insoluble in Acetone - IS 6940 : 2025)	-	1200	-

31 Dec, 2026

-
Included w.e.f 08.10.2026

360

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 14300 (2026)

Neem based EC containing azadirachtin - Specification (first revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1(Description - IS 14300 : 2026)	-	500	-
3.2.2(Cold Test - IS 6940 : 2025)	-	600	-
3.2.3(Flash Point - IS 1448 (Part - 20) : 2024)	-	600	-
3.2.4(Emulsion Test - IS 6940 : 2025)	-	600	-
3.3.1(Active Content - IS 14300 : 2026)	-	1500	-
3.3.2(Acidity (as H2SO4) or Alkalinity (as NaOH) - IS 6940 : 2025)	-	700	-
3.3.3(Aflatoxin content - IS 14299 : 2026)	-	1500	-

31 Dec, 2026

-
Included w.e.f 08.10.2026

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number