BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15546 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

391

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 14286 : Part 1 : Sec 2 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-2: Special requirements for testing of thin-film Cadmium Telluride CdTe based photovoltaic PV modules Third Revision

730000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	5000	OK
Cl-11.2(Maximum power determination)	-	20000	OK
Cl-11.3(Insulation tes)	-	20000	OK
Cl-11.4(Measurement of temperature coefficients)	-	25000	OK
Cl-11.5(Measurement of nominal module operating temperature)	-	0	OK
Cl-11.6(Performance at STC and NMOT)	-	25000	OK
Cl-11.7(Performance at low irradiance)	-	25000	OK
Cl-11.8(Outdoor exposure test)	-	35000	OK
Cl-11.9(Hot-spot endurance test)	-	35000	OK
Cl-11.10(UV preconditioning test)	-	65000	OK
Cl-11.11(Thermal cycling test)	-	90000	OK
Cl-11.12(Humidity-freeze test)	-	55000	OK
Cl-11.13(Damp heat test)	-	100000	OK
Cl-11.14(Robustness of terminations test)	-	15000	OK
Cl-11.15(Wet leakage current test)	-	20000	OK
Cl-11.16(Static mechanical load test)	-	25000	OK
Cl-11.17(Hail test)	-	25000	OK
Cl-11.18(Bypass diode testing)	-	15000	OK
Cl-11.19(Stabilization)	-	15000	OK
5(Marking and documentation)	-	2000	OK
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	25000	OK
11.21(Potential induced degradation test (MQT 21))	-	75000	OK
11.22(Bending test (MQT 22))	-	11000	OK
Cl-11.1(Visual inspection)	-	2000	OK

26 Sep, 2027

-
Included w.e.f. 22.10.2026

392

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

UP TO 400mm

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	5000	Complete Testing Charges(finished product) Rs 10000 Raw Material testing charge 5000 extra
4(Size of fitting)	-	200	Complete Testing Charges Rs 10000 Raw Material testing charge 5000 extra
5.1 Table-1 Fig.1(Dimension of Socket length)	-	200	Complete Testing Charges Rs 10000 Raw Material testing charge 5000 extra
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	200	Complete Testing Charges Rs 10000 Raw Material testing charge 5000 extra
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	200	Complete Testing Charges Rs 10000 Raw Material testing charge 5000 extra
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	200	-
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	2000	Complete Testing Charges Rs 10000 Raw Material testing charge 5000 extra
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	4000	Complete Testing Charges Rs 10000 Raw Material testing charge 5000 extra
8(Marking)	-	0	Complete Testing Charges Rs 10000 Raw Material testing charge 5000 extra
3.2.3(socket, measurements)	-	0	-200
3.1(Material)	-	5000	Complete Testing Charges Rs 10000 Raw Material testing charge 5000 extra
6.3(Effect on water test)	-	3000	Complete Testing Charges Rs 10000 Raw Material testing charge 5000 extra
3(Material)	-	0	repeat
4(Size of fitting)	-	0.03	repeat
5.1 Table-1 Fig.1(Dimension of Socket length)	-	0	repeat
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	0	repeat
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	0	repeat
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	0	repeat
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	0.01	repeat
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	0	repeat
8(Marking)	-	0	repeat
3.2.3(socket, measurements)	-	0	repeat
3.1(Material)	-	0	repeat
6.3(Effect on water test)	-	0	repeat

-
Included w.e.f 25.09.2026

393

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 10883 (1984)

Specification for single wheel type pipe cutters

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Shape)	-	0	-
2.2(Capacities)	-	1500	-
2.3(Dimensions)	-	2500	-
2.3.1(Tolerance)	-	0	-
3(Designation)	-	0	-
4(General Requirement)	-	2500	Only for Hardness and other qualititave tests,raw material mechanical and chemical testing chargers addtional if required as per actual. For only chemical parameter - 3000 additional , mech. testing charges if also required additonal as per applicability
5(Marking)	-	0	Covers in general requirements
2.1(Shape)	-	0	-
2.2(Capacities)	-	0	-
2.3(Dimensions)	-	0	-
2.3.1(Tolerance)	-	0	-
3(Designation)	-	0	-
4(General Requirement)	-	0	-
5(Marking)	-	0	-
2.1(Shape)	-	-	-
2.2(Capacities)	-	-	-
2.3(Dimensions)	-	-	-
2.3.1(Tolerance)	-	-	-
3(Designation)	-	-	-
4(General Requirement)	-	-	-
5(Marking)	-	-	-

-
included w.e.f 25.09.2026

394

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 17730 : Part 1 (2021)

Agro-Textiles Hail Protection Nets for Agriculture and Horticulture Purposes Specification Part 1 Warp Knitted Hail Protection Nets

50260 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	500	-
Clause 7, table 1, (ii) a("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Wales direction")	-	2450	1100+1100+250
Clause 7,table 1, (ii) b("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Course direction")	-	2450	1100+1100+250
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	8260	144 HRS UV CONDITIONING
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection only))	-	19850	19000 (100 HRS XENON UV EXPOSURE) + COLOUR FASTNESS (850)
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	1100	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	1000	-
Clause 7, table 1, (vii)(Cold cracking resistance test at – 10 °C)	-	1100	-
Clause 7, table 1, (viii)(Seam (joint) strength, percent, Min)	-	1100	-
4.1(HDPE Monofilament (linear density))	-	500	-
4.1.1(Heat shrinkage at 60 degree to 95 degree)	-	2000	-
6.1(Fabric (width))	-	500	-
6.2(Reinforcement)	-	500	-
6.3(Joints)	-	500	-
6.4(Stitching)	-	500	-
6.5(Colour)	-	500	-
7.1(Length, Width)	-	1000	-

31 Dec, 2029

-
-

395

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

24900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	500	Dimension of Pipe & Socket
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	500	Dimension of Pipe & Socket
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	500	Dimension of Pipe & Socket
6.1.3 (Length of Pipe)	-	500	Dimension of Pipe & Socket
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	500	Dimension of Pipe & Socket
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	500	Dimension of Pipe & Socket
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	500	Dimension of Pipe & Socket
6.1.4, Table 3(iv) Length of spigot, l1)	-	500	Dimension of Pipe & Socket
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	500	Dimension of Pipe & Socket
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	500	Dimension of Pipe & Socket
6.1.4.1 (e3min=0.75e)	-	500	Dimension of Pipe & Socket
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	500	Dimension of Pipe & Socket
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	500	Dimension of Pipe & Socket
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	500	Dimension of Pipe & Socket
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	500	Dimension of Pipe & Socket
7.1(Appearance:- )	-	500	Appearance
7.2(Colour )	-	500	Colour
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1100	Vicat Softening temp. (VST)
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1200	Longitudinal Reversion 700+500
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1600	Resistance to External Blow at 0 °C 1100+500
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1600	Ring Stiffness 1100+500
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	850	Acceptance test (1 hr/270C)
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	11000	Type test (1000 hrs /600C)
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	500	-
9.2 IS 14182(b) Solvent cement)	-	500	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	0	Included in 10.2.1
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1000	Internal Negative Hydrostatic Pressure test (internal Vacuum) for Elastomeric Sealing ring joints
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	850	Internal Hydrostatic Pressure test for Elastomeric
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	0	Included in 10.1.2
'7.5 (amdt.7)(Effect on Water (Type test))	-	3000	-
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1200	Titanium Dioxide Content (TiO2

31 Dec, 2029

-
-

396

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	500	Marking
3(Type of Fitting)	-	500	Type of fitting
4(Size Designation)	-	500	Dimension
5(Colour of fittings)	-	500	Colour of fittings
7.1,Table 1(Wall thickness)	-	500	Included in Dimension
7.2 ,Table 2&3(Socket Dimensions)	-	500	Included in Dimension
7.3(Dimensions of waste trap(Nahani Trap)	-	500	Included in Dimension
8(Sealing Rings)	-	1550	Hardness of Sealing Ring 1050+500
10(Workmanship)	-	500	Workmanship
11(Design requirements)	-	500	Design Requirement (Visual) Access Opening (Optional)
11.1(Solvent cement type or Rubber ring type)	-	500	Included in Design Requirement (Visual)
11.2(Socket and spigot configeration)	-	500	Included in Design Requirement (Visual)
11.4,Table 5(Vent cowl)	-	500	Included in dimension
11.5,Table 6(Pipe Clips)	-	500	Included in Dimension
12.1(Visual appearance)	-	500	Visual Appearance
12.2(Stress relief test)	-	1200	Stress Relief test 700+500
12.3(Vicat softening tempewrature)	-	1100	Vicat Softening Temp. (VST)
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	Resistance to Sulphuric Acid ( 55 °C/14 days) 2000+500
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1200	Titanium Dioxide Content (TiO2)
Cl.15, Annex B(Sulphated Ash Content)	-	1200	Sulphated Ash Content
16.1(Impact test)	-	1100	Impact test (Drop test)
17(Watet tightness of joint)	-	850	Water Tightness of Joints
12.4(Effect on water test)	-	3000	-
11.3(Access Openings)	-	500	-
Table 4(Dimension of Access Openings)	-	500	-

31 Dec, 2029

-
-

397

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 15827 (2019)

Cladding films for greenhouse / polyhouse - Specifications (First Revision)

1874000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Material Identification)	-	2000	-
6.1(Appearance & surface finish)	-	500	-
Cl. no. 6.3 & Table 2(Tensile strength & elongation at break (TD & MD))	-	2450	-
6.3(Dart Drop test)	-	1100	-
6.3(Total Visible Light Transmittance)	-	1100	-
6.3(Haze)	-	1100	-
6.3(Tear Strength ( MD & TD))	-	2450	-
7.4(IR eefectiveness)	-	2000	-
7.2(width)	-	500	-
7.3(Elongation under Steady Load MD)	-	1100	-
7.5(Elongation after UV Exposure MD)	-	2200	XENON ARC UV CONDITIONING FOR 2000HOURS (MINIMUM) & CHARGES VARY ACCORDING TO TIME PERIOD GIVEN IN STANDARD.
7.1(Visual)	-	500	-
6.2(Durability ref clause No. 7.5)	-	1874000	Xenon arc UV Exposure for 10700 hours (190 x 100 + 10600 x 175) maximum possible hours. Testing hours change according to declaration

31 Dec, 2029

-
-

398

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

150250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	500	Classification of pipe
6.2.1 Annex B(Chloride Content of Resin)	-	2000	Chloride content of resin
6.3.1 Annex B(Chloride content)	-	4300	Resin Chlorine content
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	1100	Heat Deflection Temp. (HDT)
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	700	Density
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	500	Dimension of pipe
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	500	Outside diameter at any point
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	500	wall thickness
7.1.3 (Effective length)	-	500	Effective lenght
8(Pipe Ends)	-	500	Pipe ends ( Visual)
9.1(Visual Appearance)	-	500	Visual Appearance
9.2 IS 12235 (Part 3)(Opacity)	-	700	Opasity
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	3000	Effect on water
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	Effect on water
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	Effect on water
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	effect on water
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	Effect on water
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	Effect on water
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1200	Reversion 700+500
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1100	Vicat Softening temp. (VST)
9.6 IS 12235(Part 14)(Density)	-	500	Density
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	850	Hydrostatic Characteristics Acceptance test (20°C /1 h. ) 850
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	4800	Type test (95°C /165 h. ) 4800
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	11000	Type test (95°C /1000 h. ) 11000
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	109500	Thermal Stability by Hydrostatic Pressure Type Test 950C/ 8760 hr/12.50
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1500	Resistance to External Blow at 0 °C 1000+500
10.4 IS 12235(Part 19)(Flattening Test)	-	1100	Flattening Test
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1800	Tensile Strength 1300+500
6.3(K value Test)	-	1100	-

31 Dec, 2029

-
-

399

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 9271 (2004)

Unplasticized polyvinyl chloride (UPVC) single wall corrugated pipes for drainage - Specification (First Revision)

16300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MATERIAL-(Conform to IS 10151))	-	3000	Material identification
5.1.3(MATERIAL- (Refer IS 4669))	-	1100	included in 5.1
8.2(Density-When tested in accordance with ]S 13360 (Part 3/Sec 1), the densi of the pipe shall be between 1.40 and 1.46 gm/cm3 .)	-	700	Density
8.5(Elongation Test-(Annex C,)- pipes shall not elongate more than 7.5 percent)	-	1300	Elongation test
7.4.2(Perforation Requirement-The maximum in flow area shall be 80 cm2/m length of pipe of all diameters)	-	500	Perforation Requirement
7.4.3(Perforation Requirement-The heght of corrugation -The depth of corrugations shall be 3 percent, Min of nominal outside diameter (dn).)	-	0	Perforation Requirement
7, Table 1(DIMENSIONS AND TOLERANCE-The nominal outside diameter and tolerances of the corrugated pipes shall be as per Table 1)	-	500	Dimension and tolerences
7.2, 8(Wall Thickness)	-	500	included in dimension and tolerences
7.3(Length)	-	500	included in dimension and tolerences
8.1.1(Visual Appearance, Workmanship and Finish)	-	500	Visual Appearance, Workmanship & Finish
8.1.2(Visual Appearance, Workmanship and Finish)	-	0	Visual Appearance, Workmanship & Finish
8.3,Table 3(Pipe stiffness-(Refer Annex A))	-	1100	Pipe Stiffness
8.4,Table 3(Impact Strength at 0 degree C- (refer Annex B))	-	1600	Impact strength at O °C 1100+500
8.6(BendIng Test-(Annex D,))	-	1000	Bending test
8.7(Joints)	-	1000	Joint test
7.4.1(Perforation Requirement- There sh.all be maximum 8 rows of perforation)	-	0	Perforation Requirement
6(TYPES- perforated or non-perforated types.)	-	0	-
8.8(The quantities of lead, dialkyl tin C4 and higher homologues (measured as tin), and any other toxic substances extracted from the internal walls of the pipes)	-	3000	--

31 Dec, 2029

-
-

400

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

25650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	500	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1100	K – Value
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	Dimension
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	0	Included in Dimension
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	0	Included in Dimension
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	0	Included in Dimension
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	0	Included in Dimension
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	0	Included in Dimension
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	500	Visual appearance
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1200	Reversion (700+500)
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	700	Stress relief test
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1100	Vicat Softening temp. (VST)
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3500	Effect on sunlight for 1600 hrs*(Manual)
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2500	Resistance to sulphic acid 55°C/14days + Sample Preparation (2000+500)
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1600	Resistance to external blow at 0°C(Impact) + Sample Preparation (1100+500)
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1800	Tensile strength (Before Exposure) + Sample Preparation (1300+500)
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	850	Axial Shrinkage (Type B pipe only) (90˚C/ 1 Hour)
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	Water tightness of joints
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000	Resistance to Dichloromethane at Specified temp.
8.6(Effect on Water Test)	-	3000	-
14(Marking)	-	500	-

31 Dec, 2029

-
-

401

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	VST
9.5(Tensile Strength IS 12235(Part 13))	-	1800	Tensile 1300+500
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1500	1000+500
9.3(Density IS 12235 (Part 14))	-	700	--
9.2(Internal Diameter)	-	500	--
9.1( Visual Appearance)	-	500	--
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1500	1000+500
8.4(Sealing rings - Hardness)	-	500	--
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	500	--
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	500	--
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	500	--
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	500	--
7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0))	-	500	--
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	500	--
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	500	--
7.3.2(Rib height)	-	500	--
7.3.1(No.of Ribs)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	500	--
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	500	--
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	500	--
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	500	--
7.2 and Table 5, 6 & 7 Fig 1B(DIMENSIONS - Casing Pipes)	-	1500	1000+500
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	500	--
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	500	--
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	500	--
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	500	--
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	500	--
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	1200	--
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	1200	700+500
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	3000	--
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000	-
4.1.2(K-Value as per IS-4669)	-	1100	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	500	-

31 Dec, 2029

-
-

402

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

9650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction))	-	0	Effect on water
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction))	-	0	Effect on water
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	Effect on water
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts))	-	0	Effect on water
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction))	-	3000	Effect on water
10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985)	-	1200	Sulphated ash content
3.2.1, Table-1, Fig-1(B)	-	0	Included in Dimension
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	0	Included in Dimension
Clause 3.2.2, and Fig. 2.(B)	-	500	Included in Dimension
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts))	-	0	-
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	500	Dimension
3.1(General)	-	4100	1100+3000

31 Dec, 2029

-
-

403

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

9650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Material)	-	4100	VCM Content K - Value
4(Size of fitting)	-	0	Dimension
5.1 Table-1 Fig.1(Dimension of Socket length)	-	500	Socket Lengths & Diameter at mid point of Socket Length
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	0	Socket Lengths & Diameter at mid point of Socket Length
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	0	Socket Lengths & Diameter at mid point of Socket Length
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	0	Socket Lengths & Diameter at mid point of Socket Length
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	700	Opacity
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850	Short term Hydraulic test (27 °C/1hour)
8(Marking)	-	500	marking
3.2.3(socket, measurements)	-	500	-
6.3(Effect on water test)	-	3000	-

31 Dec, 2029

-
-

404

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 16008 : Part 1 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 1 Shade nets made from tape yarns (first revision)

ALL

43660 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Types)	-	0	-
6.1(Dimensions and Mass - IS 1954)	-	500	-
6.1(Dimensions and Mass - IS 1954)	-	500	-
6.2 Table 1(Mass - IS 1964)	-	500	-
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-	1100	-
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-	1100	-
6.2 Table 1(Retention of breaking strength after UV exposure - IS 1969 (Part 1))	-	2200	-
6.2 Table 1(Colour fastness to artificial light, IS 2454)	-	19850	850+19000
6.2 Table 1(Bursting Pressure, IS 1966 (Part 1 or 2))	-	1000	-
6.2 Table 1(Shading Percentage)	-	700	-
4.3, 4(Colour)	-	500	-
4.2, 4(Fabric )	-	1000	500+500
4.1.1, 4(HDPE Tapes Heat shrinkage )	-	1400	700+700
4.1, 4( HDPE Tapes Linear density )	-	700	-
4.1, 4(HDPE Tapes Width )	-	500	-
4.1, 4(HDPE Tapes UV stabilizer)	-	2000	-
4.1, 4(HDPE Tapes Material Identification )	-	2000	-

31 Dec, 2029

-
-

405

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 16008 : Part 2 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 2 Shade nets made from mono filament yarns (first revision)

ALL

96100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Material)	-	2000	-
4.2(Fabric)	-	1000	500+500
4.3(Colour)	-	500	-
5.0(Types)	-	500	-
6.1(Dimensions and mass)	-	500	-
6.2(Dimensions and mass)	-	500	-
6.2 Table 1(Mass g/m2,Min)	-	500	-
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method,Warpway,Weftway 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min )	-	1100	-
6.2 Table 1(Warpway Weftway)	-	1100	-
6.2 Table 1(Retention of breaking strength after UV exposure, N, Min)	-	64700	2200+62500
6.2 Table 1(Colour fastness to artificial light1)	-	19850	850+19000
6.2 Table 1(Bursting pressure, kgf/cm2, Min)	-	1000	-
6.2 Table 1(Shading %)	-	700	-
4.1(HDPE Mono filament)	-	0	-
4.1.1(HDPE Mono filament)	-	0	-
4.1(HDPE Mono filament)	-	0	-
6.0(Requirements)	-	0	-

31 Dec, 2029

-
-

406

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 15450 (2022)

Polyethylene-aluminium-polyethylene composite pressure pipes for hot and cold water supplies Specifications first revision of IS 15450

ALL

90150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MATERIALS)	-	11475	FOR 8 PARAMETERS
8(COLOUR)	-	500	-
9(DIMENSIONS OF PIPE)	-	500	-
10(VISUAL APPEARANCE)	-	500	-
11.1(Density (Method of test as per Table 3))	-	1325	700+625
11.2(Melt Flow Rate (Method of test as per Table 3))	-	1100	-
11.3(Overall Migration)	-	2200	1700+500
11.4(Thermal Stability to Oxidation (Method of test as per Table 3))	-	2200	-
11.5(Carbon Black Content and Dispersion (Method of test as per Table 3))	-	700	-
11.6(Pigment Dispersion (For Coloured Pipes) (Method of test as per Table 3))	-	0	-
11.7(Resistance to Weathering)	-	51000	36000 WEATHERING FOR 24 MONTHS AFTER WEATHERING TESTS 1800 (ELONGATION) 2200 (OIT) 11000 (HYDROSTATIC TEST FOR 1000 HOURS)
11.8(Adhesion Test)	-	1100	-
11.9(Apparent Tensile Strength of Pipe)	-	1300	-
11.11(Hydraulic Characteristics)	-	7350	850 1700 4800
14(MARKING)	-	500	-
9.3(Length of Straight Pipe)	-	500	-
11.1(Minimum Burst Pressure)	-	850	-
11.11.12(Long Term Hydrostatic Test)	-	1700	-
12.1(Type Test)	-	4800	-

31 Dec, 2029

-
-

407

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 13487 (2024)

Irrigation Equipment — Emitters — Specification

ALL

6100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2(Emitter Ends)	-	500	-
Cl-7.1(Construction and Workmanship)	-	500	-
Cl-7.2(Flow Paths in Emitter)	-	500	-
Cl-7.3(Resistance to Hydrostatic Pressure)	-	1000	-
Cl-7.4(Emitter Pull-Out)	-	500	-
Cl-7.4.1(In-Line Emitters)	-	500	-
Cl-7.4.2(On-Line Emitters)	-	500	-
Cl-8.1.1(Uniformity of Emission Rate)	-	1000	-
Cl-8.1.2(Emission Rate as Function of Inlet Pressure)	-	1000	-
Cl-8.1.3(Determination of Emitter Exponent)	-	600	-
Cl-9(Marking)	-	500	-

31 Dec, 2029

-
-

408

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

all

10300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	500	-
7.1.1(Maximum and minimum outside diameter of socket)	-	500	-
7.1.1 Table-2(Length of Socket end)	-	500	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	500	-
7.2(Minimum inside diameter of conduit)	-	500	-
7.3(Length of conduit)	-	500	-
7.4(Unifomity of The wall Thickness)	-	500	-
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	500	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	1100	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	1100	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1100	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	1100	-
10(Resistance to Heat -Ball presure test)	-	700	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	700	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	1600	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	1600	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	1600	-
13(Tests for external influence as per clause 13 of IS: 9537 (Part 1)-1980)	-	1600	-
12(3 Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	0	-
12(3 Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	0	-
11.0(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	0	-
10.0(Resistance to Heat -Ball presure test)	-	0	-
9.5 Fig.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	0	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-	0	-
9.3(Compression Test at Full force applied (On load))	-	0	-
9.2(Bending Test At Low Temp (-5 ±2°C))	-	0	-
9.2(Bending Test At Room Temp)	-	0	-
7.3(Length of conduit)	-	0	-
7.1.1 Table-2(Length of Socket end)	-	0	-

31 Dec, 2029

-
-

409

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 9537 : Part 1 (1980)

Specification for conduits for electrical installations: Part 1 general requirements

ALL

10300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	500	-
7(Dimensions)	-	1000	-
8(Constrution)	-	500	-
9 & 9.2("Mechanical properties Bending test ")	-	1100	-
9.3(Compression test)	-	1100	-
9.4(Impact test)	-	1100	-
9.5(Collapse test)	-	1000	-
10(Resistance to heat)	-	700	-
11(Resistance to burning)	-	700	-
12(Electrical strength test & Insulation resistance test)	-	1600	-
13(Eternal influences)	-	1600	-

31 Dec, 2029

-
-

410

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 17216 (2019)

Polyethylene Mulch Films for Agriculture and Horticulture • Specification

non reflective type film

245905 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Density)	-	700	-
5.1.2(Melt Flow Index)	-	1100	-
5.1.4(Carbon black, Density)	-	700	-
5.1.4(Carbon black, Toluene extract)	-	700	-
5.1.4(Carbon black, Volatile matter)	-	700	-
5.1.5(UV Stabilizer)	-	2000	-
5.2.1(Visual Appearance)	-	500	-
5.2.2(Film Form)	-	500	-
5.2.4(Odour)	-	500	-
5.3.1.1(Tolerance on thickness)	-	500	-
5.3.1.2(Tolerance on width)	-	500	-
5.3.2(Impact Strength)	-	1100	-
5.3.2, Table 1(Nominal Film Thickness)	-	500	-
5.3.2, Table 1(Impact Failure Mass)	-	1100	-
5.3.3(Tensile Strength at Break)	-	3600	1300+500+1300+500
5.3.4(Elongation at Break)	-	0	-
5.3.5(Coefficient of Friction)	-	850	-
5.3.6(Elmendorf Tear Strength)	-	1100	-
5.3.7(Opacity)	-	575	-
5.4, Table 2(Carbon black, percent)	-	1100	-
5.4, Table 2(Ash content, percent)	-	1200	-
5.4, Table 2(Carbon black dispersion)	-	700	-
5.5(Service Life)	-	222580	FOR MAXIMUM OF 5502 HOURS OF uv EXPOSURE 100 X 65 = 6500+5402X 40=216080 =222580
5.5, Annex D(U. V. Exposure (Service Life of Indian Solar Radiant Exposure 160 Kly))	-	3600	1300+500+1300+500

31 Dec, 2029

-
-

411

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 14885 (2022)

Polyethylene Pipes for the Supply of Gaseous Fuels ï¿½ Specification (First Revision)

559475 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Grade of material)	-	500	-
4.3(Nominal Diameter)	-	500	-
4.4(Colour)	-	500	-
5.1(Polyethylene compound)	-	6300	-
5.3(Anti-oxidant)	-	1500	-
5.4(U-V stabilizer)	-	2000	-
5.7(PE Compound Quality Evaluation)	-	400000	10000 HOURS HYDROSTATIC PRESSURE TEST
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	5000	-
5.6(Resistance to Weathering)	-	50500	-
6.1(Out of Roundness (Ovality))	-	500	-
6.2(Wall thickness (Take 8 reading and Average will be repoted))	-	500	-
7(Finish)	-	500	-
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	4000	-
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	4800	-
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	11000	-
8.2(Reversion Test)	-	1000	-
8.3(Density)	-	1325	700+625
8.6(Thermal Stability (Oxidation Induction Time))	-	2200	-
8.7(Volatile Matter Content)	-	600	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1300	-
6.4(Length of Pipe)	-	500	-
8.4(Melt Flow Rate (MFR))	-	1100	-
8.5(Pigment Dispersion)	-	600	-
8.10(Slow Crack Growth Rate Test)	-	10800	165+500 HOURS HYDROSTATIC PRESSURE TEST
8.11(Squeeze-off)	-	1300	-
5.1, 5.7 Table 2(v) Water content1))	-	600	-
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	0	-
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	0	-
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	0	-
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	0	-
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	0	-
5.3(Anti-Oxidant)	-	0	-
5.4(U.V. Stabilizer)	-	0	-
5.5(Effects of Gas Condensate on the Hydrostatic Strength)	-	0	-
5.6(ii) Hydraulic characteristics)	-	0	-
5.6(iii) Thermal stability (Oxidation induction time))	-	0	-
8.7(Volatile Matter Content)	-	0	-
6(Dimensions of pipes)	-	0	-
7(Finish)	-	0	-
8.1(Hydraulic Characteristics)	-	0	-
8.2(Reversion test)	-	0	-
8.3(Density)	-	0	-
8.4(Melt Flow Rate)	-	0	-
8.5(Pigment Dispersion)	-	0	-
8.6(Thermal Stability (Oxidation Induction Time))	-	0	-
8.9(Resistance to Weathering)	-	0	-
8.10(Slow Crack Growth Rate Test)	-	0	-
8.11(Squeeze-of)	-	0	-
10(Marking)	-	0	-

31 Dec, 2029

-
-

412

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 1709 (1984)

Specification for capacitors or electric fan motors (First Revision)

ELECTRICAL

270000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Rated Voltage)	-	2000	-
4.2(Rated Frequency)	-	2000	-
4.2(Ambient Air Temp.)	-	2000	-
4.2(Capacitance)	-	2000	-
4.2(Capacitor)	-	2000	-
Cl. 5.1(Capacitor)	-	2000	-
Cl. 5.2(Capacitor)	-	2000	-
Cl. 5.3(Capacitor)	-	2000	-
Cl. 5.4(Capacitor)	-	2000	-
Cl 5.5(Capacitor)	-	2000	-
Cl. 5.6(Capacitor)	-	2000	-
Cl. 5.7(Capacitor)	-	2000	-
a(ISS 1709 : 1984)	-	2000	-
b(Manufacturers name or trade-mark and Serial number)	-	2000	-
c(Rated Voltage)	-	2000	-
d(Rated frequency)	-	2000	-
e(Rated Capacitance)	-	2000	-
f(Rated anbient Temperature)	-	2000	-
Cl. 6.2(Product may also be marked with standard mark.)	-	2000	-
Cl. 7.2(The capcitors shall be visually examined for finish and marking)	-	2000	-
Cl. 7.3.1(Insualtion Resistance between terminal and container)	-	2000	-
Cl. 7.3.2(Insulation Resistance between terminals)	-	2000	-
Cl. 7.4.1(Capacitors shall be subjected to an ac voltage test as specified in Table 2.)	-	2000	-
Cl. 7.4.2(Capacitors shall be subjected for 10sec to a test between terminals and metal foil wrapped tightly around the surface of the container with s sinusoidal test voltages. Test Voltage:2000Vrms for 10sec During the test, no dielectric breakdown or flashover shall occur. )	-	2000	-
Cl. 7.5(Capacitance measured at rated frequency and rated voltage.)	-	20000	-
Cl.7.6(Tangent of Loss Angle measured at rated frequency and rated voltage. The maximum value of the tangent of loss angle for Self-healing MPP Type.)	-	20000	-
Cl. 7.7(A weight of 2kg shall be suspended freely from each one of them in turn for a period of 10 sec. There shall be no damage to the capacitor or termination after this loading.)	-	2000	-
Cl 7.8(Each termination shall withstand two consecutive bends as specified without damage to the capacitors)	-	1000	-
Cl 7.9(Soldering tags shall withstand two consecutive cycles of bending as specified without damage to the capacitors.)	-	1000	-
Cl. 7.10(There shall be no damage to the capacitors when the torque is applied to the nuts and screws of threaded terminations:)	-	1000	-
Cl. 7.11(The capacitor shall be not suffer any damage when the specified soldering iron is applied to the termination of 15 sec.)	-	1000	-
Cl. 7.12(Unenergized capacitor units kept in a position most likely to reveal leakage and heated throughout so that all parts of the container reach the temperature 5ºC higher the maximum operating temperature value. Total heating and cooling cycle time shall be 8 hours. After the sealing test No leakage shall occure.)	-	1000	-
Cl. 7.13(Capacitance)	-	5000	-
Cl. 7.13(Change in capacitance at 70°C as compare to 27°C. (Limit: 5%Max.) )	-	20000	-
Cl. 7.13(Change in capacitance at 0°C as compare to 27°C. (Limit: 3%Max.) )	-	20000	-
Cl. 7.14.1(Before test capacitance shall be measured. Th capacitor shall be subjected for 10 seconds to an ac voltage of 1.5 ti9mes the rated voltage. If rewer than five breakdown occure during the time, The voltage shall be increased slowly until five breakdown occured until voltage occured 3.5 times the rated voltage. voltage reduced to 0.8 times, no breakdown is permitted after decreased of voltage.)	-	2000	-
Cl. 7.14.2(If only one or no breakdown has occurred since begning of the test when voltage has reached 3.5 times the rated voltage, the test shall be repeated on aonther identical capacitor.)	-	1000	-
Cl.7.14.3(Before and after the test,the cpacitance shall be measured, A chage not greater than 0.3 %in its value shall be allowec.)	-	1000	-
Cl. 7.15(After the test Capcitance variation)	-	1000	-
Cl. 7.16(The capacitors are mounted in a air circulated test chamber as specified and capacitors are energized at test voltage 1.25UN for 500hr Continuously at 50Hz. During the test no permanent breskdown,intertuption or flashover shall occure.)	-	25000	-
Cl. 7.16(Change in capacitance, (Limit: 5%Max.) )	-	15000	-
Cl. 7.16(At the end of the test, the capacitors shall cool down freely to the ambient temperature and the tangent of loss angle shall be then measured. )	-	10000	-
Cl. 7.16(Change in Tangent of Loss angle, (Limit: ----) )	-	15000	-
Cl. 7.17(The capacitor sample was mounted in a circulating air oven maintained at a temperature 10ºC above the maximum operating temperature as specified without energizing. Capacitor energized at 1.4 times rated voltage by applying test voltage between terminal for 1 h, then 1.6 times rated voltage for 1 h, then 1.8 times rated voltage for 1 h, then 2.0 times rated voltage for 1 h then switch off. Then 2.0 times the rated voltage for an 8 h period each in four cycles of 24h. After completion of the test, the capacito is consider to have passe destruction test if a) Current through it has not been interruped by the delayed action test circuit fuse or by any internal fuse. b) The currnt through it has been interrputed without any harmful effect occurring. c)Three delayed action test ciucuit fuse have cleared without any hamfu effect occurring.d) The endurance is entact at the end of test e) The test voltage between terminals and container is passed at the end of the test.)	-	40000	-
Cl. 7.16(At the end of the test, the capacitors shall cool down freely to the ambient temperature and then capacitance shall be measured.)	-	20000	-

26 Sep, 2027

-
-

413

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP), Azadpur

8131406

IS 15622 (2017)

Pressed Ceramic Tiles - Specification (First Revision)

Frost test facility available for size upto-800*800mm

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5& 5.1, Table 1(Coordinating size- IS 13630(pt-1))	-	0	-
5& 5.1, Table 1(Work size- IS 13630(pt-1))	-	0	-
5& 5.1, Table 1(Thickness- IS 13630(pt-1))	-	500	-
5& 5.1, Table 2(Nominal size -IS 13630(pt-1))	-	0	-
6 table 5, i a (Length-IS 13630(pt-1))	-	500	-
6 table 5,i a (width-IS 13630(pt-1))	-	500	-
6 table 5, i b (Thickness- IS 13630(pt-1))	-	500	-
6 table 5, i c(Straigthness of side-IS 13630(pt-1))	-	500	-
6 table 5, i d(Rectangularity-IS 13630(pt-1))	-	500	-
6 table 5, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 5, i f(Surface quality-IS 13630(pt-1))	-	500	-
6 table 5, ii a(Water Absorption-IS 13630(pt-2))	-	1000	-
6 table 5, ii b(Module of rupture -IS 13630(pt-6))	-	1000	-
6 table 5, ii c(Bending Strength-IS 13630(pt-6))	-	1000	-
6 table 5, ii d(Moisture Expension-IS 13630(pt-3))	-	500	-
6 table 5, ii e(Scratch hardness of surface -IS 13630(pt-13))	-	500	-
6 table 5, ii f(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	500	-
6 table 5, ii g(Thermal shock resistance IS 13630(pt-5))	-	1000	-
6 table 5, ii h(Impact resistance-IS 13630(pt-14))	-	1000	-
6 table 5, ii j(Co-efficient of friction-tiles intended for used on floor )	-	1000	-
6 table 5, ii k(Crazing resistance-IS 13630(pt-9))	-	3000	-
6 table 5, ii m(resistance to surface abrasion of glazed Tilles)	-	1000	-
6 table 5, iii a(Resistance to staining of glazed Tilles-IS 13630(pt-8))	-	500	-
6 table 5, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound-IS 13630(pt-8))	-	1000	-
6 table 5, iii c(Resistance to acid and alkalis (with the exception ofhydrofluoric acid and its compounds – Glazed tiles-IS 13630(pt-8))	-	1000	-
6 table 6, i a (Length-IS 13630(pt-1))	-	500	-
6 table 6, i a (width-IS 13630(pt-1))	-	500	-
6 table 6, i b (Thickness-IS 13630(pt-1))	-	500	-
6 table 6, i c(Straigthness of side-IS 13630(pt-1))	-	500	-
6 table 6, i d(Rectangularity-IS 13630(pt-1))	-	500	-
6 table 6, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 6, i f(Surface quality-IS 13630(pt-1))	-	500	-
6 table 6, ii a(Water Absorption-IS 13630(pt-2) )	-	3000	-
6 table 6, ii b(Module of rupture -IS 13630(pt-6))	-	1000	-
6 table 6, ii c(Bending Strength-IS 13630(pt-6))	-	1000	-
6 table 6, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	1000	-
6 table 6, ii h(Thermal shock resistance-IS13630(pt-5) )	-	1000	-
6 table 6, ii j(Crazing resistance-IS 13630(pt-9))	-	3000	-
6 table 6, ii k(Impact resistance-IS 13630(pt-14))	-	1000	-
6 table 6, ii m(Co-efficient of friction-tiles intended for used on floor )	-	1000	-
6 table 6, ii n(Forst resistance-IS 13630(pt-10))	-	10000	WE HAVE FACILITY UPTO SIZE 800*800 MM ONLY
6 table 6, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	-
6 table 6, iii a(Resistance to staining of glazed Tilles)	-	500	-
6 table 6, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 6, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
6 table 7, i a (Length-IS 13630(pt-1))	-	500	-
6 table 7, i a (width-IS 13630(pt-1))	-	500	-
6 table 7, i b (Thickness-IS 13630(pt-1))	-	500	-
6 table 7, i c(Straigthness of side-IS 13630(pt-1))	-	500	-
6 table 7, i d(Rectangularity-IS 13630(pt-1))	-	500	-
6 table 7, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 7, i f(Surface quality-IS 13630(pt-1))	-	300	-
6 table 7, ii a(Water Absorption-IS 13630(pt-2) )	-	1000	-
6 table 7, ii b(Module of rupture-IS 13630(pt-6) )	-	1000	-
6 table 7, ii c(Bending Strength-IS 13630(pt-6))	-	1000	-
6 table 7, ii d(Moisture Expension-IS 13630(pt-3))	-	500	-
6 table 7, ii e(Scratch hardness of surface-IS 13630(pt-13))	-	500	-
6 table 7, ii f(Resistance to surface abrasion of glazed Tilles)	-	1000	-
6 table 7, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	1000	-
6 table 7, ii h(Thermal shock resistance-IS13630(pt-5) )	-	1000	-
6 table 7, ii j(Crazing resistance-IS 13630(pt-9))	-	3000	-
6 table 7, ii k(Impact resistance-IS 13630(pt-14))	-	1000	-
6 table 7, ii m(Co-efficient of friction-tiles intended for used on floor )	-	1000	-
6 table 7, ii n(Forst resistance-IS 13630(pt-10))	-	10000	WE HAVE FACILITY UPTO SIZE 800*800 MM ONLY
6 table 7, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	-
6 table 7, iii a(Resistance to staining of glazed Tilles)	-	500	-
6 table 7, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 7, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
6 table 8, i a (Length-IS 13630(pt-1))	-	500	-
6 table 8, i a (width-IS 13630(pt-1))	-	500	-
6 table 8, i b (Thickness-IS 13630(pt-1))	-	500	-
6 table 8, i c(Straigthness of side-IS 13630(pt-1))	-	500	-
6 table 8, i d(Rectangularity-IS 13630(pt-1))	-	500	-
6 table 8, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 8, i f(Surface quality-IS 13630(pt-1))	-	300	-
6 table 8, ii a(Water Absorption-IS 13630(pt-6) )	-	1000	-
6 table 8, ii b(Module of rupture-IS 13630(pt-6) )	-	1000	-
6 table 8, ii c(Bending Strength-IS 13630(pt-6))	-	1000	-
6 table 8, ii d(Moisture Expension-IS 13630(pt-3))	-	500	-
6 table 8, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	-
6 table 8, ii f(Resistance to surface abrasion of glazed Tilles)	-	1000	-
6 table 8, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	1000	-
6 table 8, ii j(Crazing resistance-IS 13630(pt-9))	-	3000	-
6 table 8, ii k(Impact resistance-IS 13630(pt-14))	-	1000	-
6 table 8, ii m(Co-efficient of friction-tiles intended for used on floor )	-	1000	-
6 table 8, ii n(Forst resistance-IS 13630(pt-10))	-	10000	WE HAVE FACILITY UPTO SIZE 800*800 MM ONLY
6 table 8, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	-
6 table 8, ii q(Bulk Density-IS13630(pt-2))	-	500	-
6 table 8, iii a(Resistance to staining of glazed Tilles)	-	500	-
6 table 8 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 8, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
6 table 9, i a (Length-IS 13630(pt-1))	-	500	-
6 table 9, i a (width-IS 13630(pt-1))	-	500	-
6 table 9, i b (Thickness-IS 13630(pt-1))	-	500	-
6 table 9, i c(Straigthness of side-IS 13630(pt-1))	-	500	-
6 table 9, i d(Rectangularity-IS 13630(pt-1))	-	500	-
6 table 9, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 9, i f(Surface quality-IS 13630(pt-1))	-	300	-
6 table 9, ii a(Water Absorption-IS 13630(pt-6) )	-	1000	-
6 table 9, ii b(Module of rupture-IS 13630(pt-6) )	-	1000	-
6 table 9, ii c(Bending Strength-IS 13630(pt-6))	-	1000	-
6 table 9, ii d(Moisture Expension-IS 13630(pt-3))	-	500	-
6 table 9, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	-
6 table 9, ii f(Resistance to surface abrasion of glazed Tilles)	-	1000	-
6 table 9, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C )	-	1000	-
6 table 9, ii h(Thermal shock resistance-IS 13630(pt-5))	-	1000	-
6 table 9, ii j(Crazing resistance-IS 13630(pt-9))	-	3000	-
6 table 9, ii k(Impact resistance-IS 13630(pt-14))	-	1000	-
6 table 8, ii m(Co-efficient of friction-tiles intended for used on floor )	-	1000	-
6 table 9, ii n(Forst resistance-IS 13630(pt-10))	-	10000	WE HAVE FACILITY UPTO SIZE 800*800 MM ONLY
6 table 9, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	-
6 table 9, ii q(Bulk Density-)	-	1000	-
6 table 9, iii a(Resistance to staining )	-	500	-
6 table 9 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 9, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
6 table 6, i f(Surface quality-IS 13630(pt-1))	-	300	-
6 table 6, ii a(Water Absorption-IS 13630(pt-2) )	-	1000	-
6 table 6, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	500	-
6 table 7, i f(Surface quality-IS 13630(pt-1))	-	500	-
6 table 7, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	500	-
6 table 7, ii n(Forst resistance-IS 13630(pt-10))	-	1000	WE HAVE FACILITY UPTO SIZE 800*800 MM ONLY
6 table 8, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	500	-
6 table 9, ii d(Moisture Expension-IS 13630(pt-3))	-	400	-
6 table 9, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C )	-	500	-
6 table 9, ii q(Bulk Density-)	-	500	-
As per Clause 6 Table 5 SI No. (ii) (j)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	1000	-
As per Clause 6 Table 5 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	1000	-
As per Clause 6 Table 6 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	1000	-
As per Clause 6 Table 6 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	1000	-
As per Clause 6 Table 7 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	1000	-
As per Clause 6 Table 7 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	1000	-
As per Clause 6 Table 8 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	1000	-
As per Clause 6 Table 8 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	1000	-
As per Clause 6 Table 9 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	1000	-
As per Clause 6 Table 9 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	1000	-
5& 5.1, Table 1(Coordinating size- IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 1(Work size- IS 13630(pt-1))	-	0	Provisional Testing Charges
5& 5.1, Table 1(Thickness- IS 13630(pt-1))	-	200	Provisional Testing Charges
5& 5.1, Table 2(Nominal size -IS 13630(pt-1))	-	0	Provisional Testing Charges
6 table 5, i a (Length-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 5,i a (width-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 5, i b (Thickness- IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 5, i c(Straigthness of side-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 5, i d(Rectangularity-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 5, i e(Surface flatness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 5, i f(Surface quality-IS 13630(pt-1))	-	300	Provisional Testing Charges
6 table 5, ii a(Water Absorption-IS 13630(pt-2))	-	1000	Provisional Testing Charges
6 table 5, ii b(Module of rupture -IS 13630(pt-6))	-	800	Provisional Testing Charges
6 table 5, ii c(Bending Strength-IS 13630(pt-6))	-	700	Provisional Testing Charges
6 table 5, ii d(Moisture Expension-IS 13630(pt-3))	-	400	Provisional Testing Charges
6 table 5, ii e(Scratch hardness of surface -IS 13630(pt-13))	-	500	Provisional Testing Charges
6 table 5, ii f(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	500	Provisional Testing Charges
6 table 5, ii g(Thermal shock resistance IS 13630(pt-5))	-	500	Provisional Testing Charges
6 table 5, ii h(Impact resistance-IS 13630(pt-14))	-	1000	Provisional Testing Charges
6 table 5, ii k(Crazing resistance-IS 13630(pt-9))	-	2000	Provisional Testing Charges
6 table 5, ii m(resistance to surface abrasion of glazed Tilles)	-	1000	Provisional Testing Charges
6 table 5, iii a(Resistance to staining of glazed Tilles-IS 13630(pt-8))	-	500	Provisional Testing Charges
6 table 5, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound-IS 13630(pt-8))	-	1150	Provisional Testing Charges
6 table 5, iii c(Resistance to acid and alkalis (with the exception ofhydrofluoric acid and its compounds – Glazed tiles-IS 13630(pt-8))	-	1150	Provisional Testing Charges
6 table 6, i a (Length-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 6, i a (width-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 6, i b (Thickness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 6, i c(Straigthness of side-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 6, i d(Rectangularity-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 6, i e(Surface flatness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 6, i f(Surface quality-IS 13630(pt-1))	-	300	Provisional Testing Charges
6 table 6, ii a(Water Absorption-IS 13630(pt-2) )	-	1000	Provisional Testing Charges
6 table 6, ii b(Module of rupture -IS 13630(pt-6))	-	800	Provisional Testing Charges
6 table 6, ii c(Bending Strength-IS 13630(pt-6))	-	700	Provisional Testing Charges
6 table 6, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	500	Provisional Testing Charges
6 table 6, ii h(Thermal shock resistance-IS13630(pt-5) )	-	500	Provisional Testing Charges
6 table 6, ii j(Crazing resistance-IS 13630(pt-9))	-	2000	Provisional Testing Charges
6 table 6, ii k(Impact resistance-IS 13630(pt-14))	-	1000	Provisional Testing Charges
6 table 6, ii n(Forst resistance-IS 13630(pt-10))	-	5000	Provisional Testing Charges
6 table 6, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	Provisional Testing Charges
6 table 6, iii a(Resistance to staining of glazed Tilles)	-	500	Provisional Testing Charges
6 table 6, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1150	Provisional Testing Charges
6 table 6, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1150	Provisional Testing Charges
6 table 7, i a (Length-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 7, i a (width-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 7, i b (Thickness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 7, i c(Straigthness of side-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 7, i d(Rectangularity-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 7, i e(Surface flatness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 7, i f(Surface quality-IS 13630(pt-1))	-	300	Provisional Testing Charges
6 table 7, ii a(Water Absorption-IS 13630(pt-2) )	-	1000	Provisional Testing Charges
6 table 7, ii b(Module of rupture-IS 13630(pt-6) )	-	800	Provisional Testing Charges
6 table 7, ii c(Bending Strength-IS 13630(pt-6))	-	700	Provisional Testing Charges
6 table 7, ii d(Moisture Expension-IS 13630(pt-3))	-	400	Provisional Testing Charges
6 table 7, ii e(Scratch hardness of surface-IS 13630(pt-13))	-	500	Provisional Testing Charges
6 table 7, ii f(Resistance to surface abrasion of glazed Tilles)	-	1000	Provisional Testing Charges
6 table 7, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	500	Provisional Testing Charges
6 table 7, ii h(Thermal shock resistance-IS13630(pt-5) )	-	500	Provisional Testing Charges
6 table 7, ii j(Crazing resistance-IS 13630(pt-9))	-	2000	Provisional Testing Charges
6 table 7, ii k(Impact resistance-IS 13630(pt-14))	-	1000	Provisional Testing Charges
6 table 7, ii n(Forst resistance-IS 13630(pt-10))	-	5000	Provisional Testing Charges
6 table 7, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	Provisional Testing Charges
6 table 7, iii a(Resistance to staining of glazed Tilles)	-	500	Provisional Testing Charges
6 table 7, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1150	Provisional Testing Charges
6 table 7, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1150	Provisional Testing Charges
6 table 8, i a (Length-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 8, i a (width-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 8, i b (Thickness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 8, i c(Straigthness of side-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 8, i d(Rectangularity-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 8, i e(Surface flatness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 8, i f(Surface quality-IS 13630(pt-1))	-	300	Provisional Testing Charges
6 table 8, ii a(Water Absorption-IS 13630(pt-6) )	-	1000	Provisional Testing Charges
6 table 8, ii b(Module of rupture-IS 13630(pt-6) )	-	1150	Provisional Testing Charges
6 table 8, ii c(Bending Strength-IS 13630(pt-6))	-	1150	Provisional Testing Charges
6 table 8, ii d(Moisture Expension-IS 13630(pt-3))	-	400	Provisional Testing Charges
6 table 8, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	Provisional Testing Charges
6 table 8, ii f(Resistance to surface abrasion of glazed Tilles)	-	1000	Provisional Testing Charges
6 table 8, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	500	Provisional Testing Charges
6 table 8, ii j(Crazing resistance-IS 13630(pt-9))	-	2500	-
6 table 8, ii k(Impact resistance-IS 13630(pt-14))	-	1000	Provisional Testing Charges
6 table 8, ii n(Forst resistance-IS 13630(pt-10))	-	5000	Provisional Testing Charges
6 table 8, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	Provisional Testing Charges
6 table 8, ii q(Bulk Density-IS13630(pt-2))	-	500	Provisional Testing Charges
6 table 8, iii a(Resistance to staining of glazed Tilles)	-	500	Provisional Testing Charges
6 table 8 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1150	Provisional Testing Charges
6 table 8, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1150	Provisional Testing Charges
6 table 9, i a (Length-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 9, i a (width-IS 13630(pt-1))	-	100	Provisional Testing Charges
6 table 9, i b (Thickness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 9, i c(Straigthness of side-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 9, i d(Rectangularity-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 9, i e(Surface flatness-IS 13630(pt-1))	-	200	Provisional Testing Charges
6 table 9, i f(Surface quality-IS 13630(pt-1))	-	300	Provisional Testing Charges
6 table 9, ii a(Water Absorption-IS 13630(pt-6) )	-	1000	Provisional Testing Charges
6 table 9, ii b(Module of rupture-IS 13630(pt-6) )	-	800	Provisional Testing Charges
6 table 9, ii c(Bending Strength-IS 13630(pt-6))	-	700	Provisional Testing Charges
6 table 9, ii d(Moisture Expension-IS 13630(pt-3))	-	400	Provisional Testing Charges
6 table 9, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	Provisional Testing Charges
6 table 9, ii f(Resistance to surface abrasion of glazed Tilles)	-	1000	Provisional Testing Charges
6 table 9, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C )	-	500	Provisional Testing Charges
6 table 9, ii h(Thermal shock resistance-IS 13630(pt-5))	-	500	Provisional Testing Charges
6 table 9, ii j(Crazing resistance-IS 13630(pt-9))	-	2000	Provisional Testing Charges
6 table 9, ii k(Impact resistance-IS 13630(pt-14))	-	1000	Provisional Testing Charges
6 table 9, ii n(Forst resistance-IS 13630(pt-10))	-	5000	Provisional Testing Charges
6 table 9, ii p(Resistance to deep abrasion of unglazed tiles)	-	1000	Provisional Testing Charges
6 table 9, ii q(Bulk Density-)	-	500	Provisional Testing Charges
6 table 9, iii a(Resistance to staining )	-	500	Provisional Testing Charges
6 table 9 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1150	Provisional Testing Charges
6 table 9, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1150	Provisional Testing Charges
As per Clause 6 Table 5 SI No. (ii) (j)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	2500	-
As per Clause 6 Table 5 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	2500	-
As per Clause 6 Table 6 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	2500	-
As per Clause 6 Table 6 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	2500	-
As per Clause 6 Table 7 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	2500	-
As per Clause 6 Table 7 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	2500	-
As per Clause 6 Table 8 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	2500	-
As per Clause 6 Table 8 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	2500	-
As per Clause 6 Table 9 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	2500	-
As per Clause 6 Table 9 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	2500	-
6 table 5, ii j(Co-efficient of friction-tiles intended for used on floor )	-	2000	-
6 table 6, ii m(Co-efficient of friction-tiles intended for used on floor )	-	2000	-
6 table 7, ii m(Co-efficient of friction-tiles intended for used on floor )	-	2000	-
6 table 8, ii j(Crazing resistance-IS 13630(pt-9))	-	2000.02	-
6 table 8, ii m(Co-efficient of friction-tiles intended for used on floor )	-	2000	-
6 table 8, ii m(Co-efficient of friction-tiles intended for used on floor )	-	2000	-
As per Clause 6 Table 5 SI No. (ii) (j)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	2500	2500/- EXTRA IF REQUIRED SLIP RESISTANCE TEST
As per Clause 6 Table 5 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	2500	2500/- EXTRA IF REQUIRED LEAD AND CADMIUM TEST
As per Clause 6 Table 6 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	2500	2500/- EXTRA IF REQUIRED SLIP RESISTANCE TEST
As per Clause 6 Table 6 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	2500	2500/- EXTRA IF REQUIRED LEAD AND CADMIUM TEST
As per Clause 6 Table 7 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	2500	2500/- EXTRA IF REQUIRED SLIP RESISTANCE TEST
As per Clause 6 Table 7 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	2500	2500/- EXTRA IF REQUIRED LEAD AND CADMIUM TEST
As per Clause 6 Table 8 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	2500	2500/- EXTRA IF REQUIRED SLIP RESISTANCE TEST
As per Clause 6 Table 8 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	2499.98	2500/- EXTRA IF REQUIRED LEAD AND CADMIUM TEST
As per Clause 6 Table 9 SI No. (ii) (m)(Slip Resistance / Co-efficient of friction -- Measurement of surface frictional porperties of tiles intended for use on floors)	-	2500	2500/- EXTRA IF REQUIRED SLIP RESISTANCE TEST
As per Clause 6 Table 9 SI No. (iii) (d)(Determination of lead and cadmium given off by Glazed Tiles)	-	2500	2500/- EXTRA IF REQUIRED LEAD AND CADMIUM TEST

17 Jun, 2027

-
-

414

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	100	-
7.1.1(Accessories Classification)	-	100	-
7.1.2(Accessories Classification)	-	0	Refer to the Clause No. 7.1.1 above
7.1.3(Accessories Classification)	-	0	Refer to the Clause No. 7.1.1 above
7.1.4(Accessories Classification)	-	0	Refer to the Clause No. 7.1.1 above
7.1.5(Accessories Classification)	-	0	Refer to the Clause No. 7.1.1 above
7.2.1(Socket-Outlets Classification)	-	0	Refer to the Clause No. 7.1.1 above
7.2.2(Socket-Outlets Classification)	-	0	Refer to the Clause No. 7.1.1 above
7.2.3(Socket-Outlets Classification)	-	0	Refer to the Clause No. 7.1.1 above
7.2.4(Socket-Outlets Classification)	-	0	Refer to the Clause No. 7.1.1 above
7.3(Plug Classification)	-	0	Refer to the Clause No. 7.1.1 above
8.1(MARKING)	-	300	-
8.8(MARKING)	-	0	Refer to the Clause No. 8.1 above
8.9(MARKING)	-	0	Refer to the Clause No. 8.1 above
9.1(CHECKING OF DIMENSIONS)	-	1000	-
9.2(CHECKING OF DIMENSIONS)	-	0	Refer to the Clause No. 9.1 above
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above
11.1(PROVISIONS FOR EARTHING)	-	500	-
11.2(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above
11.3(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above
11.4(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above
11.5(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above
11.6(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above
12.1.1(TERMINALS)	-	500	-
12.1.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.2.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.2.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.2.3(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.2.4(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.2.5(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.2.6(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.2.7(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.2.8(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.2.9(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.2.10(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.2.11(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.3.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.3.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.3.3(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.3.4(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.3.5(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.3.6(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.3.7(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.3.8(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.3.9(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.3.10(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.3.11(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
12.3.12(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	1000	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	1000	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above
15(INTERLOCKED SOCKET-OUTLETS)	-	500	-
16.1(RESISTANCE TO AGEING,)	-	7000	-
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above
16.3(Resistance to Humidity)	-	0	Refer to the Clause No. 16.1 above
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	500	-
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above
18(OPERATION OF EARTHING CONTACTS)	-	200	-
19(TEMPERATURE RISE)	-	1000	-
20(BREAKING CAPACITY)	-	1000	-
21(NORMAL OPERATION)	-	4000	-
21(NORMAL OPERATION)	-	0	Refer to the Clause No. 21 above
21(NORMAL OPERATION)	-	0	Refer to the Clause No. 21 above
21(NORMAL OPERATION)	-	0	Refer to the Clause No. 21 above
22.1(Verification of the Maximum Withdrawal Force)	-	400	-
22.2(Verification of Minimum Withdrawal Force)	-	0	Refer to the Clause No. 22.1 above
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	500	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	1000	-
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	0	Refer to the Clause No. 24.1 above
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	0	Refer to the Clause No. 24.1 above
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above
24.4(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	0	Refer to the Clause No. 24.1 above
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	0	Refer to the Clause No. 24.1 above
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	0	Refer to the Clause No. 24.1 above
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	0	Refer to the Clause No. 24.1 above
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	0	Refer to the Clause No. 24.1 above
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	0	Refer to the Clause No. 24.1 above
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	0	Refer to the Clause No. 24.1 above
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	0	Refer to the Clause No. 24.1 above
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	0	Refer to the Clause No. 24.1 above
24.15(MECHANICAL STRENGTH )	-	0	Refer to the Clause No. 24.1 above
24.16(MECHANICAL STRENGTH )	-	0	Refer to the Clause No. 24.1 above
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	0	Refer to the Clause No. 24.1 above
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	1000	-
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	0	Refer to the Clause No. 25.1 above
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	0	Refer to the Clause No. 25.1 above
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	0	Refer to the Clause No. 25.1 above
25.4(RESISTANCE TO HEAT )	-	0	Refer to the Clause No. 25.1 above
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	-
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	500	-
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	500	-
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	0	Refer to the Clause No. 28.1.1 above
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	0	Refer to the Clause No. 28.1.1 above
29(RESISTANCE TO RUSTING)	-	700	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	1000	-
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	0	Refer to the Clause No. 30.1 above
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	0	Refer to the Clause No. 30.1 above
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	0	Refer to the Clause No. 30.1 above
6(Ratings)	-	0	Refer to the Clause No. 6 above and repeated clause
7.1.1(Accessories Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.2(Accessories Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.3(Accessories Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.4(Accessories Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.5(Accessories Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.1(Socket-Outlets Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.2(Socket-Outlets Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.3(Socket-Outlets Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.4(Socket-Outlets Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.3(Plug Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
8.1(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.8(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.9(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
9.1(CHECKING OF DIMENSIONS)	-	0	Refer to the Clause No. 9.1 above and repeated clause
9.2(CHECKING OF DIMENSIONS)	-	0	Refer to the Clause No. 9.1 above and repeated clause
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
11.1(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11.2(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11.3(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11.4(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11.5(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11.6(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
12.1.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.1.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.3(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.4(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.5(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.6(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.7(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.8(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.9(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.10(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.11(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.3(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.4(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.5(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.6(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.7(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.8(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.9(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.10(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.11(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.12(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
15(INTERLOCKED SOCKET-OUTLETS)	-	0	Refer to the Clause No. 15 above and repeated clause
16.1(RESISTANCE TO AGEING,)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.3(Resistance to Humidity)	-	0	Refer to the Clause No. 16.1 above and repeated clause
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
18(OPERATION OF EARTHING CONTACTS)	-	0	Refer to the Clause No. 18 above and repeated clause
19(TEMPERATURE RISE)	-	0	Refer to the Clause No. 19 above and repeated clause
20(BREAKING CAPACITY)	-	0	Refer to the Clause No. 20 above and repeated clause
21(NORMAL OPERATION)	-	0	Refer to the Clause No. 21 above and repeated clause
21(NORMAL OPERATION)	-	0	Refer to the Clause No. 21 above and repeated clause
21(NORMAL OPERATION)	-	0	Refer to the Clause No. 21 above and repeated clause
21(NORMAL OPERATION)	-	0	Refer to the Clause No. 21 above and repeated clause
22.1(Verification of the Maximum Withdrawal Force)	-	0	Refer to the Clause No. 22.1 above and repeated clause
22.2(Verification of Minimum Withdrawal Force)	-	0	Refer to the Clause No. 22.1 above and repeated clause
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.4(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.15(MECHANICAL STRENGTH )	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.16(MECHANICAL STRENGTH )	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	0	Refer to the Clause No. 24.1 above and repeated clause
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	0	Refer to the Clause No. 25.1 above and repeated clause
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	0	Refer to the Clause No. 25.1 above and repeated clause
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	0	Refer to the Clause No. 25.1 above and repeated clause
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	0	Refer to the Clause No. 25.1 above and repeated clause
25.4(RESISTANCE TO HEAT )	-	0	Refer to the Clause No. 25.1 above and repeated clause
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above and repeated clause
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above and repeated clause
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above and repeated clause
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
29(RESISTANCE TO RUSTING)	-	0	Refer to the Clause No. 29 above and repeated clause
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	0	Refer to the Clause No. 30.1 above and repeated clause
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	0	Refer to the Clause No. 30.1 above and repeated clause
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	0	Refer to the Clause No. 30.1 above and repeated clause
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	0	Refer to the Clause No. 30.1 above and repeated clause
8.7(Marking)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.6(Marking)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.5(Marking)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.4(Marking)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.3(Marking)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.2(Marking)	-	0	Refer to the Clause No. 8.1 above and repeated clause
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
24.17(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.18(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.19(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
28.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above and repeated clause
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
25.4(RESISTANCE TO HEAT)	-	0	Refer to the Clause No. 25.1 above and repeated clause
25(RESISTANCE TO HEAT)	-	0	Refer to the Clause No. 25.1 above and repeated clause
24.19(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.18(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.17(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.14(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
22.1.2(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	0	Refer to the Clause No. 22.1 above and repeated clause
22.1.1(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	0	Refer to the Clause No. 22.1 above and repeated clause
19.3(TEMPERATURE RISE)	-	0	Refer to the Clause No. 19 above and repeated clause
19.2(TEMPERATURE RISE)	-	0	Refer to the Clause No. 19 above and repeated clause
19.1(TEMPERATURE RISE)	-	0	Refer to the Clause No. 19 above and repeated clause
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
16.2.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.1.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.1.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
14.10.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.10.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.10.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
13.7.3 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.7.2 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.7.1(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
12.3.11 (b)(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.11 (a)(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
11(PROVISION FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.2.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
9(CHECKING OF DIMENSIONS)	-	0	Refer to the Clause No. 9.1 above and repeated clause
8.7(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.6(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.5(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.4(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.3(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.2(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
7.2(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
6.2(RATINGS)	-	0	Refer to the Clause No. 6 above and repeated clause
6.1(RATINGS)	-	0	Refer to the Clause No. 6 above and repeated clause
30(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES)	-	0	Refer to the Clause No. 30.1 above and repeated clause
28.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
28(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above and repeated clause
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
25(RESISTANCE TO HEAT)	-	0	Refer to the Clause No. 25.1 above and repeated clause
24.19(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.18(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.17(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.14(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
19.3(TEMPERATURE RISE)	-	0	Refer to the Clause No. 19 above and repeated clause
19.2(TEMPERATURE RISE)	-	0	Refer to the Clause No. 19 above and repeated clause
19.1(TEMPERATURE RISE)	-	0	Refer to the Clause No. 19 above and repeated clause
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
17(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
16.2.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.1.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.1.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
14.10.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.10.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.10.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
12.3.11 (b)(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.11 (a)(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
11(PROVISION FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.2.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
9(CHECKING OF DIMENSIONS)	-	0	Refer to the Clause No. 9.1 above and repeated clause
8.7(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.6(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.5(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.4(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.3(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.2(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
7.2(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
6.2(RATINGS)	-	0	Refer to the Clause No. 6 above and repeated clause
6.1(RATINGS)	-	0	Refer to the Clause No. 6 above and repeated clause
28.1.2(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
28.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above and repeated clause
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
25(RESISTANCE TO HEAT)	-	0	Refer to the Clause No. 25.1 above and repeated clause
24.18(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.17(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.16 & 24.14.2(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.16 & 24.14.1(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.15 & 24.14.2(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.15 & 24.14.1(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.14.2(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.14.1(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.14(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.13(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.12(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.11(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.1(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.9(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.8(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.7(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.6(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.5(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.4(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.3(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.2(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.1(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
22(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	0	Refer to the Clause No. 22.1 above and repeated clause
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
17(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
16.2.4(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.3(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
13.23(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.22(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.21(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.2(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.19(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.18(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.15(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.13(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.12(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.11(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.8(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.7.3 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.7.2 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.7.1(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.7(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
12.3.12 (TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.11 (b)(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.11 (a)(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.10(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.9(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.8(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.7(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.6(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.5(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.4(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.3(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.8(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.6(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.1.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.1.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
11.4(PROVISION FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11.3(PROVISION FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11(PROVISION FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.2.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
9.3(CHECKING OF DIMENSIONS)	-	0	Refer to the Clause No. 9.1 above and repeated clause
9.2(CHECKING OF DIMENSIONS)	-	0	Refer to the Clause No. 9.1 above and repeated clause
9.1(CHECKING OF DIMENSIONS)	-	0	Refer to the Clause No. 9.1 above and repeated clause
8.8(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.7(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.6(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.5(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.4(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.3(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.2(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.1(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
7.3(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.5(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.4(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.3(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.2 (CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.1(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.4(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.3 (CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.2(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.1 (CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
6.2(RATINGS)	-	0	Refer to the Clause No. 6 above and repeated clause
6.1(RATINGS)	-	0	Refer to the Clause No. 6 above and repeated clause
30(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES)	-	0	Refer to the Clause No. 30.1 above and repeated clause
29(RESISTANCE TO RUSTING)	-	0	Refer to the Clause No. 29 above and repeated clause
28.2(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
28.1.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
28.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
28(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above and repeated clause
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above and repeated clause
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above and repeated clause
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above and repeated clause
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
25.4(RESISTANCE TO HEAT)	-	0	Refer to the Clause No. 25.1 above and repeated clause
25.3(RESISTANCE TO HEAT)	-	0	Refer to the Clause No. 25.1 above and repeated clause
25.2(RESISTANCE TO HEAT)	-	0	Refer to the Clause No. 25.1 above and repeated clause
25.1(RESISTANCE TO HEAT)	-	0	Refer to the Clause No. 25.1 above and repeated clause
25(RESISTANCE TO HEAT)	-	0	Refer to the Clause No. 25.1 above and repeated clause
24.16 & 24.14.2(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.16 & 24.14.1(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.15 & 24.14.2(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.15 & 24.14.1(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.14.2(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.14.1(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.14(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.8(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.6(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.3(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.1(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
21(NORMAL OPERATION)	-	0	Refer to the Clause No. 21 above and repeated clause
20(MAKING AND BREAKING CAPACITY)	-	0	Refer to the Clause No. 20 above and repeated clause
19(TEMPERATURE RISE)	-	0	Refer to the Clause No. 19 above and repeated clause
18(OPERATION OF EARTHING CONTACTS)	-	0	Refer to the Clause No. 18 above and repeated clause
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
17(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
16.3(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.4(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.3(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
12.3.12 (TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.11 (b)(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.11 (a)(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.10(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.9(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.8(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.7(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.6(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.5(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.4(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.3(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.11(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.10(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.9(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.8(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.7(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.6(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.5(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.4(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.3(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.1.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.1.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
11.5(PROVISION FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11.4(PROVISION FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11.3(PROVISION FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11.2(PROVISION FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11.1(PROVISION FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11(PROVISION FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.2.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
9.3(CHECKING OF DIMENSIONS)	-	0	Refer to the Clause No. 9.1 above and repeated clause
9.2(CHECKING OF DIMENSIONS)	-	0	Refer to the Clause No. 9.1 above and repeated clause
9.1(CHECKING OF DIMENSIONS)	-	0	Refer to the Clause No. 9.1 above and repeated clause
8.8(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.7(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.6(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.5(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.4(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.3(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.2(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.1(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
7.3(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.5(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.4(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.3(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.2 (CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.1(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.4(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.3 (CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.2(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.1 (CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7(CLASSIFICATION)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
6.2(RATINGS)	-	0	Refer to the Clause No. 6 above and repeated clause
6.1(RATINGS)	-	0	Refer to the Clause No. 6 above and repeated clause
6(RATINGS)	-	0	Refer to the Clause No. 6 above and repeated clause
28.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above and repeated clause
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
25.4(RESISTANCE TO HEAT)	-	0	Refer to the Clause No. 25.1 above and repeated clause
25(RESISTANCE TO HEAT)	-	0	Refer to the Clause No. 25.1 above and repeated clause
24.19(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.18(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.17(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.14(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24(MECHANICAL STRENGTH)	-	0	Refer to the Clause No. 24.1 above and repeated clause
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
22.1.2(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	0	Refer to the Clause No. 22.1 above and repeated clause
22.1.1(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	0	Refer to the Clause No. 22.1 above and repeated clause
19.3(TEMPERATURE RISE)	-	0	Refer to the Clause No. 19 above and repeated clause
19.2(TEMPERATURE RISE)	-	0	Refer to the Clause No. 19 above and repeated clause
19.1(TEMPERATURE RISE)	-	0	Refer to the Clause No. 19 above and repeated clause
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
16.2.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.1.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.1.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
14.10.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
6(Ratings)	-	0	Refer to the Clause No. 6 above and repeated clause
7.1.1(Accessories Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.2(Accessories Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.3(Accessories Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.4(Accessories Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.1.5(Accessories Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.1(Socket-Outlets Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.2(Socket-Outlets Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.3(Socket-Outlets Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.2.4(Socket-Outlets Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
7.3(Plug Classification)	-	0	Refer to the Clause No. 7.1.1 above and repeated clause
8.1(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.8(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
8.9(MARKING)	-	0	Refer to the Clause No. 8.1 above and repeated clause
9.1(CHECKING OF DIMENSIONS)	-	0	Refer to the Clause No. 9.1 above and repeated clause
9.2(CHECKING OF DIMENSIONS)	-	0	Refer to the Clause No. 9.1 above and repeated clause
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	Refer to the Clause No. 10.1 above and repeated clause
11.1(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11.2(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11.3(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11.4(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11.5(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
11.6(PROVISIONS FOR EARTHING)	-	0	Refer to the Clause No. 11.1 above and repeated clause
12.1.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.1.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.3(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.4(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.5(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.6(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.7(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.8(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.9(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.10(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.2.11(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.1(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.2(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.3(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.4(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.5(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.6(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.7(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.8(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.9(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.10(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.11(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
12.3.12(TERMINALS)	-	0	Refer to the Clause No. 12.1.1 above and repeated clause
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	0	Refer to the Clause No. 13.1 above and repeated clause
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	0	Refer to the Clause No. 14.1 above and repeated clause
15(INTERLOCKED SOCKET-OUTLETS)	-	0	Refer to the Clause No. 15 above and repeated clause
16.1(RESISTANCE TO AGEING,)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	Refer to the Clause No. 16.1 above and repeated clause
16.3(Resistance to Humidity)	-	0	Refer to the Clause No. 16.1 above and repeated clause
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	Refer to the Clause No. 17.1 above and repeated clause
18(OPERATION OF EARTHING CONTACTS)	-	0	Refer to the Clause No. 18 above and repeated clause
19(TEMPERATURE RISE)	-	0	Refer to the Clause No. 19 above and repeated clause
20(BREAKING CAPACITY)	-	0	Refer to the Clause No. 20 above and repeated clause
21(NORMAL OPERATION)	-	0	Refer to the Clause No. 21 above and repeated clause
21(NORMAL OPERATION)	-	0	Refer to the Clause No. 21 above and repeated clause
21(NORMAL OPERATION)	-	0	Refer to the Clause No. 21 above and repeated clause
21(NORMAL OPERATION)	-	0	Refer to the Clause No. 21 above and repeated clause
22.1(Verification of the Maximum Withdrawal Force)	-	0	Refer to the Clause No. 22.1 above and repeated clause
22.2(Verification of Minimum Withdrawal Force)	-	0	Refer to the Clause No. 22.1 above and repeated clause
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	Refer to the Clause No. 23.1 above and repeated clause
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.4(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.15(MECHANICAL STRENGTH )	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.16(MECHANICAL STRENGTH )	-	0	Refer to the Clause No. 24.1 above and repeated clause
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	0	Refer to the Clause No. 24.1 above and repeated clause
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	0	Refer to the Clause No. 25.1 above and repeated clause
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	0	Refer to the Clause No. 25.1 above and repeated clause
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	0	Refer to the Clause No. 25.1 above and repeated clause
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	0	Refer to the Clause No. 25.1 above and repeated clauseRefer to the Clause No. 25.1 above and repeated clause
25.4(RESISTANCE TO HEAT )	-	0	Refer to the Clause No. 25.1 above and repeated clause
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	0	Refer to the Clause No. 26.1 above and repeated clause
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above and repeated clause
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above and repeated clause
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	Refer to the Clause No. 27.1 above and repeated clause
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	0	Refer to the Clause No. 28.1.1 above and repeated clause
29(RESISTANCE TO RUSTING)	-	0	Refer to the Clause No. 29 above and repeated clause
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	0	Refer to the Clause No. 30.1 above and repeated clause
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	0	Refer to the Clause No. 30.1 above and repeated clause
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	0	Refer to the Clause No. 30.1 above and repeated clause
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	0	Refer to the Clause No. 30.1 above and repeated clause
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	0	-
8.5(MARKING)	-	0	Refer to the Clause NRefer to the Clause No. 6 above and repeated clauseo. 8.1 above and repeated clause

26 Sep, 2027

-
-

415

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 17546 (2021)

Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification

163350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Nominal Size(DN))	-	500	-
3.2(Nominal Outside Diameter)	-	500	-
3.3(Mean Inside Diameter of Socket at Entry)	-	500	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	500	-
3.4(Mean Inside Diameter of Socket at Shoulder (Bottom))	-	500	-
3.5(Out-of-Roundness (Ovality))	-	500	-
3.11(Type Tests)	-	137600	ALL TYPE TESTS INCLUDING 8760 HR TEST
3.11(Acceptance Tests)	-	850	-
6(Composition)	-	17975	ALL COMPOUND PROPERTIES
8.2(Opacity)	-	575	-
8.4(Vicat softening Temperature)	-	1100	-
8.5(Density)	-	500	-
8.6(Effect on water)	-	3000	-
9(Mechanical Properties)	-	750	-
11(Marking)	-	500	-
8.3(Stress Relief Test)	-	700	-
3.6(Nominal Wall Thickness)	-	500	-
3.7(Minimum Wall Thickness)	-	500	-
3.8(Tolerance)	-	500	-
8.1(Visual Appearance)	-	500	-
7(Dimensions of fitting)	-	500	-
Cl-6.2.2(Compound Chlorine Content)	-	0	-
Cl-6.2.5(Verification of the Malfunction Temperature)	-	0	-
Cl-9.1(Hydrostatic Characteristics)	-	0	-
Cl-9.2(Thermal Stability by Hydrostatic Pressure Testing)	-	0	-

31 Dec, 2029

-
-

416

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

51975 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, 5.1 table-1(MATERIALS)	-	1050	--
5.2(Polyethylene Resin)	-	1050	--
5.3 (a)(Carbon Black Master Batch)	-	925	925 (CBC)
5.3(b)(Carbon Black Master Batch)	-	1200	(ASH CONTENT)
5.3(c)(Carbon Black Master Batch)	-	700	VOLATILE MATTER
5.3(d)(Carbon Black Master Batch)	-	1200	Toluene extract
5.3(e)(Carbon Black Master Batch)	-	1325	density (700 + 625)
8.3(Carbon black)	-	1100	MFI
8.6(Overall migration)	-	2200	1700+500
6, 6.1(PIPE DESCRIPTION)	-	0	--
6.2(Colour)	-	500	--
6.2.1(6.1.1 Identification Stripes)	-	500	--
7.2(Length)	-	500	--
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	500	--
7.4.1.2(Ovality)	-	500	--
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21900	100 hrs test=4000 48 hrs test =1600 165 hrs test =4800 1000 hrs test = 11000+500
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	--
8.2(Longitudinal Reversion Test)	-	1200	700+500
8.4( Melt Flow Rate)	-	1100	--
8.5 (Oxidation Induction Time)	-	2200	--
8.7(Density)	-	700	--
8.8(Tensile Strength for Butt-fusion)	-	1800	1300+500
8.9 table-6(Elongation at Break)	-	1800	1300+500
8.10(Slow Crack Growth Rate)	-	6000	5500+500
5, 5.1 table-1(MATERIALS)	-	0	--
5.3 (a)(Carbon Black Master Batch)	-	1875	925+950
8.3(Carbon black)	-	925	--
5.3(Toluene Extract)	-	1200	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	100 hrs test=4000 48 hrs test =1600 165 hrs test =4800 1000 hrs test = 11000
8.2(Longitudinal Reversion Test)	-	900	700+200
8.7(Density)	-	500	--
8.9 table-6(Elongation at Break)	-	0	--
5.2(Volatile matter Content)	-	1200	-

31 Dec, 2029

-
-

417

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 16481 (2022)

Textiles Synthetic Micro Fibres for Use in Cement Based Matrix Specification First Revision

Textile-Synthetic Micro fibers

142690 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Types of Synthetic Fibres used in Secondary Reinforcement of Concrete)	-	0	Mentioned in clause 4.2, table 1, V).
4.2, Table 1, i)(Cross section)	-	2930	-
4.2, Table 1, ii)(Tensile strength)	-	7500	Total charges for Tensile strength and Denier (Control Sample), After exposure to Chemical (Acid & Alkali) and Heat Ageing.
4.2, Table 1, iii)(Specific gravity)	-	1000	-
4.2, Table 1, iv)(Ultimate elongation)	-	0	Already given in clause 4.2, Table 1, ii)
4.2, Table 1, v)(Melting Temperature)	-	6500	The test charge includes identification, melting point, and glass transition temperature
4.2, Table 1, vi)(Glass Transition Temperature)	-	0	Mentioned in clause 4.2, table 1, V).
4.2, Table 2, i)(Equivalent fibre diameter,)	-	0	Mentioned in clause 4.2, table 2, iii).
4.2, Table 2, ii)(Length)	-	0	Mentioned in clause 4.2, table 2, iii).
4.2, Table 2, iii)(Aspect ratio)	-	1500	The test charge includes Equivalent fiber diameter, length and Aspect ratio.
4.2, Table 3, i)(Drying shrinkage for concrete only)	-	100000	The test charge includes Shrinkage, Compression, Flexural and Workmanship.
4.3(General)	-	760	Identification through Dissolution test method.
4.4(Resistance to Alkalis)	-	5500	The test charge includes Alkali Treatment and Tensile Strength.
4.5(Resistance to Acids)	-	5500	The test charge includes Acid Treatment and Tensile Strength.
4.6(Resistance to Ageing)	-	5500	The test charge includes Oven Ageing and Tensile Strength.
4.3.1(Isophthalic Acid (IPA) content)	-	6000	Already Given

-
-

418

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 17079 (2019)

Rubber modified bitumen (Rmb) ? specification

RMB

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Material and Manufacture)	-	2000	Specific gravity and Moisture charge
6.2(Homogeneity)	-	0	-
6.4(De-mixing of Modifier)	-	1000	-
"clause no 6.5 table no-1 sl no-1"("Penetration at 25°C ")	-	3000	-
"clause no 6.5 table no-1 sl n0-2"(Softening point (R and B))	-	4000	-
"clause no 6.5 table no-1 sl no-3"(Flash point, COC)	-	5000	-
"clause no 6.5 table no-1 sl no-4"("Elastic recovery of half thread in ductilometer at 15°C")	-	5000	-
"clause no 6.5 table no-1 sl no-5"("Complex modulus as (G*/Sin) as Min 1.0 kPa at 10 rad/s")	-	10000	-
"clause no 6.5 table no-1 sl no-6"(Separation, difference in softening point (R&B))	-	5000	-
"clause no 6.5 table no-1 sl no-7"(Viscosity at 150°C)	-	5000	IS 1206 (Part 1)
"clause no 6.5 table no-2 sl no-1"(Loss in mass)	-	5000	-
"clause no 6.5 table no-2 sl no-2"(Change in Softening Point)	-	5000	-
"clause no 6.5 table no-2 sl no-3"(Reduction in penetration of residue at 25°C)	-	5000	-
"clause no 6.5 table no-2 sl no-4"(Elastic recovery of half thread in ductilometer at 25°C, percent)	-	5000	-
"clause no 6.5 table no-2 sl no-5"(Complex modulus as (G*/Sin) as Min 2.2 kPa at 10 rad/s)	-	15000	-

-
-

419

Envirocare Labs Pvt Ltd, Thane

7120616

IS 6661 (2022)

Potassium Schoenite

3250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	350	-
"3.2, Table 1 SI No. i"(Moisture - Annex A)	-	350	-
"3.2, Table 1 SI No. ii"("Potash content (as K2O) - 5 of IS 6092 (Part 4)")	-	850	-
"3.2, Table 1 SI No. iii"("Magnesium oxide (as MgO) (on dry basis) - Annex B")	-	850	-
"3.2, Table 1 SI No. iv"("Sodium (as NaCl) (on dry basis) - 5.8 of IS 6092 (Part 6)")	-	850	-

25 May, 2027

-
Included w.e.f. 21.10.2026

420

Delhi Test House (A Unit of Delhii Test House Global LLP) (65) Kundli-2, Sonipat

9138006

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
8.1.1(Protection against live parts in all positions)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
8.1.2(Protection against live parts in openings)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
8.1.3(Protection against live parts in visible glowing heating elements)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
8.1.4(Protection against live parts against protective impedance)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
9(Starting of motor operation test requirements and tests)	-	500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
10.1(Power input)	-	1500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
10.2(Current input)	-	1500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
11.1(General)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
11.2(General)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
11.3(Heating)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
13.1(General)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
13.2(Leakage current at operating temperature)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
13.3(Electric Strength at operating temperature)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
14(Transient Over Voltages)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
15.0(General)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
15.1(Ingress Protection test other than IPX0 (IP test))	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
15.2(Spillage Test)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
15.3(Humidity Test)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
16.0(General)	-	2500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
16.1(General)	-	2500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
16.2(Leakage Current (after Clause 15))	-	2500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
16.3(Electric Strength (after clause 15 and 16.2))	-	2500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
17(Over Load Protection of Transformers and associated circuits)	-	1000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
18(Endurance Test requirements and tests)	-	1000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
19(Abnormal Operation)	-	1500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
20(Stability test)	-	500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
21(Mechanical Strength Test)	-	500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
22(Construction verification related test)	-	1250	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
23(General)	-	2000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
24(Components)	-	1000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
25(Supply connection and external flexible cords)	-	2500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
26(Terminals for external conductors)	-	2500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
27(Provision for earthing)	-	1500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
28(Screw test and connections)	-	1000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
29(clearance, creepage distances and solid insulation)	-	1500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
30.1(Ball pressure test)	-	2000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
30.2(Glow Wire Test)	-	2000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
30.2(Needle Flame Test)	-	2000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
31(Resistance to Rusting)	-	1500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
32(Radiation Toxicity and Similar Hazards)	-	1500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
4(General requirement)	-	500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
16(Leakage current and electric strength)	-	2500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
17(Overload protection of transformers and associated circuits)	-	1000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
18(Endurance)	-	1000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
8.1.5(Live parts of built-in appliances)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
11.4(Heating appliances)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
11.5(Motor-operated appliances)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
11.6(Combined appliances)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
11.7(Duration corresponding)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
11.8(Temperature rise)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
19.11.4.1(Electrostatic discharges)	-	30000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
19.11.4.2(Radiated fields)	-	30000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
19.11.4.3(Fast transient bursts)	-	30000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
19.11.4.4(Surge immunity test)	-	30000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
19.11.4.5(Immunity to conducted discharges)	-	35000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	25000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
19.11.4.7(Harmonics)	-	10000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
4(General Requirement)	-	500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
5(General conditions for tests)	-	500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
6(Classification- IS 302-1)	-	500	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.1(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.1(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.1(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.1(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.1(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.1(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.1(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.3(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.4(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.5(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.6(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.7(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.8(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.9(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.1O(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.11(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.12(Marking- IS 302-2-15)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.13(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.14(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
7.15(Marking- IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
8(Protection Against Electric Shock, IS 302-1)	-	750	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
11(Heating, IS 302-1, Table -3)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
11(Heating, IS 302-1, Table -3)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
11(Heating, IS 302-1, Table -3)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
11(Heating, IS 302-1, Table -3)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
11(Heating, IS 302-1, Table -3)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-
11(Heating, IS 302-1)	-	3000	Without EMI/EMC= Rs. 25000/- With EMI/EMC= Rs. 200000/-

31 Dec, 2029

-
Included w.e.f. 09.10.2026

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number