BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11940 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

2071

Precision Laboratories LLP, Ahmedabad

7174106

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	6000	-
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	6000	-
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	6000	-
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	6000	-
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	6000	-
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	6000	-
9.2.3(Adhesion of Plies - Annexure H)	-	6000	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	6000	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	6000	-
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	6000	-
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	6000	-
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	6000	-
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	6000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	6000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	6000	-
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	6000	-
7.3(Dimensional Requirements - Squareness - Annexure D)	-	6000	-
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	6000	-
7.3(Dimensional Requirements - Thickness - Annexure E)	-	6000	-
7.3(Dimensional Requirements - Width - 8.1.4)	-	6000	-
7.3(Dimensional Requirements - Length - 8.1.4)	-	6000	-
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	6000	-
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	6000	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	6000	-
cl. 11(marking)	-	6000	-
cl. 11.1(marking - BIS certification marking)	-	6000	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	6000	-
6.2(Core- Moisture & Width)	-	6000	-
6.3(Cross Bands and Faces- Moisture content)	-	6000	-
6.3.1(Thickness of cross band and face veneers)	-	6000	-

31 Oct, 2026

-
Included w.e.f 01.04.2025

2072

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

45100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Shape and Design)	-	0	Physical Testing: 22000 Chemical Testing:23100 Total:45100
Cl-5.3(Material)	-	0	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	400	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	200	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	1000	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	1000	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	1500	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	200	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	200	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	600	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	200	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	400	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	200	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	200	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	600	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	0	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	200	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	0	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	400	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	400	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	600	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	200	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	600	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	2000	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	800	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	0	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	400	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	200	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	200	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	0	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	0	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	0	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	0	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	200	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	200	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	0	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	0	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	400	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	0	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	400	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	400	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	400	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	0	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	0	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	0	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	600	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	600	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	0	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	200	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	0	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	400	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	0	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	0	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	0	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	0	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	400	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	400	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	0	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	200	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	200	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	200	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	200	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	200	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	400	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	400	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	400	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	200	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	400	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	500	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	0	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	400	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	400	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	0	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	200	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	200	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	200	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iv)(Chromium (VI))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vii)(Formaldehyde)	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(viii)(Organotin compounds)	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(x)(pH)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	2100	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	2100	-
Cl-8.1(Marking)	-	0	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	0	FOR CHEMICAL 23100
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	0	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	0	-
Cl-5.1(Shape and Design)	-	0	-
Cl-5.3(Material)	-	0	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	0	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	0	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	0	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	0	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	0	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	0	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	0	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	0	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	0	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	0	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	0	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	0	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	0	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	0	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	0	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	0	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	0	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	0	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	0	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	0	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	0	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	0	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	0	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	0	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	0	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	0	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	0	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	0	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	0	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	0	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	0	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	0	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	0	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	0	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	0	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	0	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	0	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	0	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	0	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	0	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	0	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	0	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	0	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	0	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	0	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	0	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	0	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	0	-
Cl-6.5.2.1, Table-10 (iii)(Abrasion resistance, mm/kcs, Max)	-	0	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	0	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	0	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	0	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	0	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	0	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	0	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	0	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	0	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	0	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	0	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	0	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	0	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	0	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	0	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	0	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	0	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	0	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	0	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	0	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	0	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	0	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	0	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	0	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	0	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	0	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(iv)(Chromium (VI))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(vii)(Formaldehyde)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(viii)(Organotin compounds)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(x)(pH)	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	0	-
Cl-5.4, Table-1 (xiv) (IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	0	-
Cl-8.1(Marking)	-	0	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	0	-
CL. 5.4, Table 1, Sl No (xiv) & Table 1 of IS 17011(pH, Min)	-	0	-
CL. 5.4, Table 1, Sl No (xv)("Lead content (as Pb) ppm, Max (applicable only for PVC")	-	0	-

02 May, 2027

-
Included w.e.f 13.05.2025

2073

Intertek India Private Limited, New Delhi (E-26)

8136626

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	15% discount offered to samples received from BIS.
7.0(Marking and instructions)	-	1000	15% discount offered to samples received from BIS.
8.0(Protection against access to live part test)	-	2000	15% discount offered to samples received from BIS.
9.0(Starting of motor-operated appliances test)	-	0	This Clause is not Applicable.
10.0(Power Input and current test)	-	1000	15% discount offered to samples received from BIS.
11.0(Heating test)	-	3000	15% discount offered to samples received from BIS.
13.0(Leakage current and electric strength test)	-	4000	15% discount offered to samples received from BIS.
14.0(Transient voltages)	-	4000	15% discount offered to samples received from BIS.
15.0(Moisture Resistance)	-	3000	15% discount offered to samples received from BIS.
16.0(Leakage current and electric strength test)	-	5000	15% discount offered to samples received from BIS.
17.0(Overload protection of transformers test)	-	2000	15% discount offered to samples received from BIS.
18.0(Endurance test)	-	0	This Clause is not Applicable.
19.0(Abnormal Operations)	-	2000	15% discount offered to samples received from BIS.
20.0(Stability and Mechanical Hazards)	-	3000	15% discount offered to samples received from BIS.
21.0(Mechanical Strength)	-	2000	15% discount offered to samples received from BIS.
22.0(Construction verification related tests)	-	2000	15% discount offered to samples received from BIS.
23.0(Internal wiring)	-	2000	15% discount offered to samples received from BIS.
24.0(Components)	-	2000	15% discount offered to samples received from BIS.
25.0(Supply connections and External Flexible Cords)	-	1000	15% discount offered to samples received from BIS.
26.0(Terminal for External Conductors)	-	1000	15% discount offered to samples received from BIS.
27.0(Provision for Earthing)	-	1000	15% discount offered to samples received from BIS.
28.0(Screws and connections)	-	1000	15% discount offered to samples received from BIS.
29.0(Clearances and Creepage distances and solid insulation)	-	1000	15% discount offered to samples received from BIS.
30.0(Resistance to heat and fire)	-	3000	15% discount offered to samples received from BIS.
31.0(Resistance to rusting)	-	2000	15% discount offered to samples received from BIS.
4(General Requirements)	-	500	15% discount offered to samples received from BIS.
5(General condition for the tests)	-	500	15% discount offered to samples received from BIS.
6.0(Classification)	-	0	Repeated clause
7.0(Marking and instructions)	-	0	Repeated clause
8.0(Protection against access to live part test)	-	0	Repeated clause
9.0(Starting of motor-operated appliances test)	-	0	This clause is not applicable.
10.0(Power Input and current test)	-	0	Repeated clause
11.0(Heating test)	-	0	Repeated clause
13.0(Leakage current and electric strength test)	-	0	Repeated clause
14.0(Transient voltages)	-	0	Repeated clause
15.0(Moisture Resistance)	-	0	Repeated clause
16.0(Leakage current and electric strength test)	-	0	Repeated clause
17.0(Overload protection of transformers test)	-	0	Repeated clause
18.0(Endurance test)	-	0	This clause is not applicable.
19.0(Abnormal Operations)	-	0	Repeated clause
20.0(Stability and Mechanical Hazards)	-	0	Repeated clause
21.0(Mechanical Strength)	-	0	Repeated clause
22.0(Construction verification related tests)	-	0	Repeated clause
23.0(Internal wiring)	-	0	Repeated clause
24.0(Components)	-	0	Repeated clause
25.0(Supply connections and External Flexible Cords)	-	0	Repeated clause
26.0(Terminal for External Conductors)	-	0	Repeated clause
27.0(Provision for Earthing)	-	0	Repeated clause
28.0(Screws and connections)	-	0	Repeated clause
29.0(Clearances and Creepage distances and solid insulation)	-	0	Repeated clause
30.0(Resistance to heat and fire)	-	0	Repeated clause
31.0(Resistance to rusting)	-	0	Repeated clause
4(General Requirements)	-	0	Repeated clause
5(General condition for the tests)	-	0	Repeated clause

27 Apr, 2026

-
Included w.e.f.09.04.2025 Exclusion Cl 32.0 (Radiation, Toxicity and Similar hazards) Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC)

2074

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

110000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	10000	-
Cl 7(Dimensions Of Pipes)	-	10000	-
Cl 8(Visual Appearance)	-	10000	-
Cl 9.1(Hydraulic Characteristics)	-	10000	-
Cl 9.2(Fusion Compatibility)	-	10000	-
Cl 9.3(Reversion Test )	-	10000	-
Cl 9.4 & Annex B(Impact Strength)	-	10000	-
Cl 9.5(Density)	-	10000	-
Cl 9.6(Melt Flow Rate)	-	10000	-
Cl 9.7(Carbon Black Content & Dispersion)	-	10000	-
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	10000	-
Cl 9.9(Opacity)	-	10000	-
5(Colour)	-	10000	-

08 May, 2028

-
-

2075

ATCC TEST LABS LLP

8172626

IS/IEC 60730 : Part 2 : Sec 9 (2011)

Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing Controls

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(By inspection)	-	200	-
5.1(By inspection)	-	0	-
5.2(By inspection)	-	0	-
6.1(By inspection)	-	300	-
6.2(By inspection)	-	0	-
6.3(By inspection)	-	0	-
6.4(By inspection)	-	0	-
6.4.3(By inspection)	-	0	-
6.5(By inspection)	-	0	-
6.5.1(IEC 60529 and by inspection)	-	0	-
6.5.2(IEC 60529 and by inspection)	-	500	-
6.5.3(Annexure N and by inspection)	-	500	-
6.6(By inspection)	-	0	-
6.7.1(By inspection)	-	0	-
6.7.2(By inspection)	-	0	-
6.8(By inspection)	-	0	-
6.8.2(By inspection)	-	0	-
6.9(Annexure H and by inspection)	-	500	-
6.1(By inspection)	-	0	-
6.11(By inspection)	-	0	-
6.12(By inspection)	-	0	-
6.13(By inspection)	-	0	-
6.14(By inspection)	-	0	-
6.15(Annexure J and by inspection)	-	0	-
6.16(By inspection)	-	0	-
6.17(Annexure H)	-	200	-
6.18(Annexure H)	-	300	-
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	500	-
9(By inspection)	-	0	-
9.1.1(By inspection)	-	0	-
9.1.2(By inspection)	-	0	-
9.1.3(By inspection)	-	0	-
9.2(By inspection)	-	0	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	500	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.4(by inspection and by plating)	-	200	-
9.4.1(by inspection)	-	0	-
9.4.2(by inspection)	-	0	-
9.5.1(by inspection)	-	0	-
9.5.2(by inspection)	-	0	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	0	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	500	-
10.1.2(By inspection )	-	0	-
10.1.3(By inspection )	-	0	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	0	-
10.1.5(By measurement)	-	300	-
10.1.5.1(by inspection, by measurement, by torque test)	-	0	-
10.1.6(by inspection after cl 10.1.5)	-	0	-
10.1.7(by inspection)	-	0	-
10.1.7.1(by inspection)	-	0	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	300	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	300	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	500	-
10.1.11(By inspection)	-	0	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	200	-
10.1.13(By inspection and after the test of cl 17)	-	0	-
10.1.14(By inspection)	-	0	-
10.1.15(Figure 11 or 12)	-	300	-
10.2(By inspection)	-	0	-
10.2.1(Table 10.2.1)	-	200	-
10.2.2(By inspection)	-	0	-
10.2.3(By inspection)	-	0	-
10.2.4.1(Figure 14 or 15)	-	300	-
10.2.4.2(During the test of cl 14)	-	0	-
10.2.4.3(As per table 10.2.4.3)	-	0	-
10.2.4.4(As per Figure 16)	-	0	-
11.1(By inspection)	-	0	-
11.1.1(By inspection)	-	0	-
11.1.2(by inspection and by analysis of the material)	-	0	-
11.1.3(by inspection)	-	0	-
11.2(by inspection and by test)	-	0	-
11.2.2(by inspection, by measurement and/or by manual test)	-	0	-
11.2.3(by inspection, by measurement and/or by manual test)	-	0	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	200	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	300	-
11.2.5(As per annexure H, cl 11.2.5)	-	0	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	0	-
11.3.2(by inspection and by the tests of clauses 13)	-	0	-
11.3.3(by inspection)	-	0	-
11.3.4(by inspection)	-	0	-
11.3.5(by inspection)	-	0	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	0	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	300	-
11.3.8(by inspection)	-	0	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	200	-
11.4.1 (by inspection)	-	0	-
11.4.2(by inspection)	-	0	-
11.4.3(by the tests of clauses 15 to 17)	-	500	-
11.4.4 to 11.4.16(As per relevent type)	-	0	-
11.5(by inspection)	-	0	-
11.6.1(by inspection and by manual test)	-	0	-
11.6.2(by inspection and by manual test)	-	0	-
11.6.3.1(By inspection)	-	0	-
11.6.3.2(By inspection)	-	0	-
11.6.3.3(By inspection)	-	200	-
11.6.3.4(By inspection)	-	0	-
11.6.3.5(By inspection)	-	0	-
11.6.3.6(By inspection)	-	0	-
11.6.3.7(By inspection)	-	0	-
11.7.1(By Flexing test as per fig 9)	-	300	-
11.7.1.2.2(By Flexing test as per fig 9)	-	500	-
11.7.1.2.3(By Flexing test as per fig 9)	-	0	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	500	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	0	-
11.7.2.11 to 11.7.2.15(By measurement)	-	0	-
11.8(By inspection)	-	0	-
11.8.1(By inspection)	-	0	-
11.8.2(By inspection and as per table 11.8.2)	-	500	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	500	-
11.9.1(By inspection)	-	0	-
11.9.1.1(by inspection and manual test)	-	0	-
11.9.1.2(by inspection and manual test)	-	0	-
11.9.1.3(by inspection and manual test)	-	0	-
11.9.1.4(by inspection and manual test)	-	0	-
11.10.1(by inspection)	-	0	-
11.10.2(by inspection)	-	0	-
11.10.3(by inspection and by test of socket-outlet system)	-	0	-
11.11(Requirements during mounting, maintenance and servicing)	-	1000	-
11.11.1(By inspection)	-	0	-
11.11.1.1(By inspection)	-	0	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	500	-
11.11.1.5.4(By inspection)	-	0	-
11.11.1.5.6(by pull test)	-	500	-
11.11.2(By inspection)	-	0	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	500	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	500	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	500	-
11.11.4(By inspection)	-	0	-
11.11.5(By inspection and by manual test)	-	0	-
11.11.6(By inspection)	-	0	-
11.11.7(By inspection)	-	0	-
11.12(As per H, cl 11.12)	-	500	-
12.1(As per IEC 60529)	-	500	-
12.1.6.2(Torque test)	-	500	-
11.11.1.2(By inspection)	-	0	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	500	-
13.1(as per table 13.1)	-	500	-
13.2(As per table 13.2)	-	500	-
12.3(as per cl 12.3.1 to 12.3.7)	-	500	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	500	-
14.1(As per table 14.1)	-	500	-
14.3(As per table 14.1)	-	500	-
15(as per cl 15.1 to 15.4)	-	500	-
15.5(as per cl 15.5 to 15.6)	-	500	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	500	-
15.7(as per annexure J, cl 15.7)	-	500	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	500	-
16.2.4(test of cl 15 repeated )	-	500	-
16.2.4(42 of table 7.2)	-	500	-
17.1(by the tests of 17.1.3 as indicated in 17.16)	-	500	-
17.6(as per cl 17.6.1 and 17.6.2)	-	500	-
17.7(as per cl 17.7.1 to 17.7.7)	-	500	-
17.8(as per cl 17.8.1 to 17.8.4.1)	-	500	-
17.9(as per cl 17.9.1 to 17.9.4)	-	500	-
17.1(as per cl 17.10.1 to 17.10.4)	-	500	-
17.11(as per cl 17.11.1 to 17.11.4)	-	500	-
17.12(as per cl 17.12.1 to 17.12.5)	-	500	-
17.13(as per cl 17.13.1 to 17.13.4)	-	500	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	500	-
H.17.14(as per cl H 17.4.16)	-	500	-
17.15.2(as per cl 17.15.2 and 17.15.2.3)	-	500	-
J 17.18.5(as per cl J 17.8.5)	-	500	-
J 17.18.5(as per cl J 17.8.6)	-	500	-
J 17.17.2(as per table 13.1)	-	500	-
J 17.17(As per table 13.2)	-	500	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	500	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	500	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	500	-
18.1.6(By inspection)	-	500	-
18.1.6.1(By inspection)	-	0	-
18.1.6.2(By inspection)	-	0	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	500	-
18.2(Impact tester)	-	500	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	500	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	500	-
18.7(Pull test as per table 18.7)	-	500	-
18.8(as per cl 18.8.2 and 18.8.3)	-	500	-
18.9(axial pull of 15N/30N)	-	500	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.2.1(By inspection)	-	0	-
19.2.2(By inspection)	-	0	-
19.2.3(By inspection)	-	0	-
19.2.4(By inspection)	-	0	-
19.2.4.1(By inspection)	-	0	-
19.2.5(By inspection)	-	0	-
19.2.5.1(By inspection)	-	0	-
19.2.6(By inspection)	-	0	-
20.1(as per table 20.2)	-	500	-
20.2.1(as per table 20.3)	-	500	-
20.2.2(as per table 20.4)	-	500	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	500	-
21.2.2 to 21.2.6(as per annexure G)	-	500	-
21.2.7(As per cl G.4)	-	500	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	500	-
24.1(as per IEC 60742)	-	500	-
24.1(as per IEC 60384-14)	-	500	-
24.1(as per IEC 60127 or IEC 60269)	-	500	-
25(as per annexure H)	-	500	-
27.1(as per annexure H)	-	500	-
27.2(as per cl 27.2.1 and 27.2.2)	-	500	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	500	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	500	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	500	-
11.1.102(As per IEC 60216-1:2001)	-	500	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	500	-
11.4.101(as per cl 11.4.101)	-	500	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	500	-
11.4.107(As per annexure DD)	-	500	-
11.6.3.101(As per table 7, item 117)	-	500	-
11.101(As per annexure BB)	-	500	-
12.101(None)	-	500	-
12.101.2(15 K+Tmax for 16 hr)	-	500	-
12.101.5(as per 12.103 to 12.105)	-	500	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	500	-
14.101.1( as per cl 14.102 and 14.102.1)	-	500	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	500	-
15.5.3.109( voltage specified in Table 13.2)	-	500	-
17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C)	-	500	-
17.16.107( 250 thermal cycles.)	-	500	-
17.16.108( 7 h at a temperature of –20 C (or lower, if declared))	-	500	-
17.101.1(as per cl 17.101.1 to 17.105)	-	500	-
18.101(as per cl 18.101.2 and 101.3)	-	500	-
18.102(Hydrualic test)	-	500	-
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Information)	-	500	-
8(Protection against Electric Shock)	-	500	-
9(Provision for Protective Earthing)	-	500	-
10(Terminals and terminations)	-	500	-
11(Constructional Requirements)	-	500	-
12(Moisture and Dust Resistance)	-	2500	-
13(Electric Strength and Insulation Resistance)	-	500	-
14(Heating)	-	500	-
15(Manufacturing Deviation and Drift)	-	500	-
16(Environmental Stress)	-	500	-
17(Endurance)	-	4400	-
18(Mechanical Strength)	-	500	-
19(Threaded Parts and Connections)	-	500	-
20(Creepage Distances, Clearancces and distance through solid insulation)	-	500	-
21(Fire Hazard Testing)	-	500	-
22(Resistance to Corrosion)	-	500	-
25(Normal Operation)	-	500	-
24(Components)	-	500	-
27(Abnormal Operation)	-	500	-
28(Guidance on the use of Electronic Disconnection)	-	500	-
5(By inspection)	-	500	-
5.1(By inspection)	-	0	-
5.2(By inspection)	-	0	-
6.1(By inspection)	-	500	-
6.2(By inspection)	-	0	-
6.3(By inspection)	-	0	-
6.4(By inspection)	-	0	-
6.4.3(By inspection)	-	0	-
6.5(By inspection)	-	0	-
6.5.1(IEC 60529 and by inspection)	-	0	-
6.5.2(IEC 60529 and by inspection)	-	0	-
6.5.3(Annexure N and by inspection)	-	0	-
6.6(By inspection)	-	0	-
6.7.1(By inspection)	-	0	-
6.7.2(By inspection)	-	0	-
6.8(By inspection)	-	0	-
6.8.2(By inspection)	-	0	-
6.9(Annexure H and by inspection)	-	500	-
6.1(By inspection)	-	0	-
6.11(By inspection)	-	0	-
6.12(By inspection)	-	0	-
6.13(By inspection)	-	0	-
6.14(By inspection)	-	0	-
6.15(Annexure J and by inspection)	-	0	-
6.16(By inspection)	-	0	-
6.17(Annexure H)	-	0	-
6.18(Annexure H)	-	0	-
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	500	-
9(By inspection)	-	0	-
9.1.1(By inspection)	-	0	-
9.1.2(By inspection)	-	0	-
9.1.3(By inspection)	-	0	-
9.2(By inspection)	-	0	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	0	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	0	-
9.4(by inspection and by plating)	-	0	-
9.4.1(by inspection)	-	0	-
9.4.2(by inspection)	-	0	-
9.5.1(by inspection)	-	0	-
9.5.2(by inspection)	-	0	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	0	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	0	-
10.1.2(By inspection )	-	0	-
10.1.3(By inspection )	-	0	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	0	-
10.1.5(By measurement)	-	0	-
10.1.5.1(by inspection, by measurement, by torque test)	-	0	-
10.1.6(by inspection after cl 10.1.5)	-	0	-
10.1.7(by inspection)	-	0	-
10.1.7.1(by inspection)	-	0	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	0	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	0	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	0	-
10.1.11(By inspection)	-	0	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	0	-
10.1.13(By inspection and after the test of cl 17)	-	0	-
10.1.14(By inspection)	-	0	-
10.1.15(Figure 11 or 12)	-	0	-
10.2(By inspection)	-	0	-
10.2.1(Table 10.2.1)	-	0	-
10.2.2(By inspection)	-	0	-
10.2.3(By inspection)	-	0	-
10.2.4.1(Figure 14 or 15)	-	0	-
10.2.4.2(During the test of cl 14)	-	0	-
10.2.4.3(As per table 10.2.4.3)	-	0	-
10.2.4.4(As per Figure 16)	-	0	-
11.1(By inspection)	-	0	-
11.1.1(By inspection)	-	0	-
11.1.2(by inspection and by analysis of the material)	-	0	-
11.1.3(by inspection)	-	0	-
11.2(by inspection and by test)	-	0	-
11.2.2(by inspection, by measurement and/or by manual test)	-	200	-
11.2.3(by inspection, by measurement and/or by manual test)	-	0	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	0	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	500	-
11.2.5(As per annexure H, cl 11.2.5)	-	0	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	0	-
11.3.2(by inspection and by the tests of clauses 13)	-	0	-
11.3.3(by inspection)	-	0	-
11.3.4(by inspection)	-	0	-
11.3.5(by inspection)	-	0	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	0	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	200	-
11.3.8(by inspection)	-	500	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	0	-
11.4.1 (by inspection)	-	0	-
11.4.2(by inspection)	-	0	-
11.4.3(by the tests of clauses 15 to 17)	-	0	-
11.4.4 to 11.4.16(As per relevent type)	-	0	-
11.5(by inspection)	-	0	-
11.6.1(by inspection and by manual test)	-	0	-
11.6.2(by inspection and by manual test)	-	0	-
11.6.3.1(By inspection)	-	0	-
11.6.3.2(By inspection)	-	0	-
11.6.3.3(By inspection)	-	0	-
11.6.3.4(By inspection)	-	0	-
11.6.3.5(By inspection)	-	0	-
11.6.3.6(By inspection)	-	0	-
11.6.3.7(By inspection)	-	0	-
11.7.1(By Flexing test as per fig 9)	-	0	-
11.7.1.2.2(By Flexing test as per fig 9)	-	0	-
11.7.1.2.3(By Flexing test as per fig 9)	-	0	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	500	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	0	-
11.7.2.11 to 11.7.2.15(By measurement)	-	0	-
11.8(By inspection)	-	0	-
11.8.1(By inspection)	-	0	-
11.8.2(By inspection and as per table 11.8.2)	-	0	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	0	-
11.9.1(By inspection)	-	0	-
11.9.1.1(by inspection and manual test)	-	0	-
11.9.1.2(by inspection and manual test)	-	0	-
11.9.1.3(by inspection and manual test)	-	0	-
11.9.1.4(by inspection and manual test)	-	0	-
11.10.1(by inspection)	-	0	-
11.10.2(by inspection)	-	0	-
11.10.3(by inspection and by test of socket-outlet system)	-	0	-
11.11(Requirements during mounting, maintenance and servicing)	-	0	-
11.11.1(By inspection)	-	0	-
11.11.1.1(By inspection)	-	0	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	0	-
11.11.1.5.4(By inspection)	-	0	-
11.11.1.5.6(by pull test)	-	0	-
11.11.2(By inspection)	-	0	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	0	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	0	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	0	-
11.11.4(By inspection)	-	0	-
11.11.5(By inspection and by manual test)	-	0	-
11.11.6(By inspection)	-	0	-
11.11.7(By inspection)	-	0	-
11.12(As per H, cl 11.12)	-	0	-
12.1(As per IEC 60529)	-	0	-
12.1.6.2(Torque test)	-	0	-
11.11.1.2(By inspection)	-	0	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	0	-
13.1(as per table 13.1)	-	500	-
13.2(As per table 13.2)	-	0	-
12.3(as per cl 12.3.1 to 12.3.7)	-	0	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	0	-
14.1(As per table 14.1)	-	0	-
14.3(As per table 14.1)	-	500	-
15(as per cl 15.1 to 15.4)	-	0	-
15.5(as per cl 15.5 to 15.6)	-	0	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	0	-
15.7(as per annexure J, cl 15.7)	-	0	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	0	-
16.2.4(test of cl 15 repeated )	-	0	-
16.2.4(42 of table 7.2)	-	500	-
17.1(by the tests of 17.1.3 as indicated in 17.16)	-	500	-
17.6(as per cl 17.6.1 and 17.6.2)	-	500	-
17.7(as per cl 17.7.1 to 17.7.7)	-	500	-
17.8(as per cl 17.8.1 to 17.8.4.1)	-	0	-
17.9(as per cl 17.9.1 to 17.9.4)	-	0	-
17.1(as per cl 17.10.1 to 17.10.4)	-	0	-
17.11(as per cl 17.11.1 to 17.11.4)	-	0	-
17.12(as per cl 17.12.1 to 17.12.5)	-	500	-
17.13(as per cl 17.13.1 to 17.13.4)	-	500	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	500	-
H.17.14(as per cl H 17.4.16)	-	0	-
17.15.2(as per cl 17.15.2 and 17.15.2.3)	-	0	-
J 17.18.5(as per cl J 17.8.5)	-	0	-
J 17.18.5(as per cl J 17.8.6)	-	500	-
J 17.17.2(as per table 13.1)	-	0	-
J 17.17(As per table 13.2)	-	0	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	0	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	0	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	0	-
18.1.6(By inspection)	-	500	-
18.1.6.1(By inspection)	-	500	-
18.1.6.2(By inspection)	-	0	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	0	-
18.2(Impact tester)	-	0	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	1000	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	0	-
18.7(Pull test as per table 18.7)	-	0	-
18.8(as per cl 18.8.2 and 18.8.3)	-	500	-
18.9(axial pull of 15N/30N)	-	500	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	1000	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	0	-
19.2.1(By inspection)	-	0	-
19.2.2(By inspection)	-	0	-
19.2.3(By inspection)	-	0	-
19.2.4(By inspection)	-	0	-
19.2.4.1(By inspection)	-	0	-
19.2.5(By inspection)	-	0	-
19.2.5.1(By inspection)	-	500	-
19.2.6(By inspection)	-	500	-
20.1(as per table 20.2)	-	0	-
20.2.1(as per table 20.3)	-	0	-
20.2.2(as per table 20.4)	-	0	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	500	-
21.2.2 to 21.2.6(as per annexure G)	-	500	-
21.2.7(As per cl G.4)	-	0	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	0	-
24.1(as per IEC 60742)	-	0	-
24.1(as per IEC 60384-14)	-	0	-
24.1(as per IEC 60127 or IEC 60269)	-	500	-
25(as per annexure H)	-	0	-
27.1(as per annexure H)	-	0	-
27.2(as per cl 27.2.1 and 27.2.2)	-	0	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	0	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	0	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	500	-
11.1.102(As per IEC 60216-1:2001)	-	0	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	0	-
11.4.101(as per cl 11.4.101)	-	0	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	0	-
11.4.107(As per annexure DD)	-	500	-
11.6.3.101(As per table 7, item 117)	-	500	-
11.101(As per annexure BB)	-	500	-
12.101(None)	-	500	-
12.101.2(15 K+Tmax for 16 hr)	-	0	-
12.101.5(as per 12.103 to 12.105)	-	0	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	0	-
14.101.1( as per cl 14.102 and 14.102.1)	-	500	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	500	-
15.5.3.109( voltage specified in Table 13.2)	-	0	-
17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C)	-	0	-
17.16.107( 250 thermal cycles.)	-	0	-
17.16.108( 7 h at a temperature of –20 C (or lower, if declared))	-	0	-
17.101.1(as per cl 17.101.1 to 17.105)	-	0	-
18.101(as per cl 18.101.2 and 101.3)	-	0	-
18.102(Hydrualic test)	-	0	-
5(Rating)	-	0	-
6(Classification)	-	0	-
7(Information)	-	500	-
8(Protection against Electric Shock)	-	500	-
9(Provision for Protective Earthing)	-	500	-
10(Terminals and terminations)	-	2000	-
11(Constructional Requirements)	-	2000	-
12(Moisture and Dust Resistance)	-	1000	-
13(Electric Strength and Insulation Resistance)	-	1000	-
14(Heating)	-	1000	-
15(Manufacturing Deviation and Drift)	-	1000	-
16(Environmental Stress)	-	1000	-
17(Endurance)	-	5000	-
18(Mechanical Strength)	-	1000	-
19(Threaded Parts and Connections)	-	1000	-
20(Creepage Distances, Clearancces and distance through solid insulation)	-	1000	-
21(Fire Hazard Testing)	-	1000	-
22(Resistance to Corrosion)	-	1000	-
25(Normal Operation)	-	1000	-
24(Components)	-	1000	-
27(Abnormal Operation)	-	500	-
28(Guidance on the use of Electronic Disconnection)	-	2000	-

15 Jun, 2026

-
Included w.e.f.16.07.2025

2076

HEXIQON LABORATORY PRIVATE LIMITED, AHMEDABAD

7167306

IS 2556 : Part 15 (2024)

Vitreous China Sanitary Appliances âSpecification Part 15 Specific Requirements of Universal Water Closets (Third Revision)

Size 1, Size 2 and any other sizes

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3(GENERAL REQUIREMENTS)	-	3000	-
Cl-4(SIZES)	-	200	-
Cl-5(DIMENSIONS AND TOLERANCES)	-	3000	-
Cl-6(CONSTRUCTION)	-	500	-
Cl-7(FINISH)	-	200	-
Cl-6.3(Two-Piece Bend)	-	500	-
Cl-8.1(Universal water)	-	1400	-
Cl-8.2(Toilet Paper Test)	-	200	-
Cl-8.3(Smudge Test)	-	200	-
Cl-8.4(Holding Capacity Test)	-	200	-
Cl-8.5.1(Single Ball Test)	-	200	-
Cl-8.5.2(Fifty Ball Test)	-	200	-
Cl-8.6(Fifty Ball Test)	-	200	-
Cl-8.7(Splash Test)	-	200	-
Cl-9(LOAD BEARING TEST)	-	1000	-
Cl-11("ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY")	-	3000	-

07 Feb, 2027

-
Included w.e.f.03.04.2025

2077

BISS LABS -DIVISION OF ITW INDIA PRIVATE LIMITED. BENGALURU

6175936

IS 2403 (2024)

Short-Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets (Fourth Revision)

479434 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
Cl-3.3 Table-1,2(Measuring force)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
Cl-3.3, 3.4.2 Table-1,2(Minimum tensile strength)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
Cl-3.4.3(Preloading)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
Cl-3.4.4(Length validation)	-	51250	-
Cl-3.4.5(Dynamic testing)	-	264934	1001kN to 2000kN - Rs 412500/3 samples 501kN to 1000kN - Rs 412500/3 samples 251kN to 500kN - Rs 208750/3 samples 101kN-250kN - Rs 208750/3 samples Up to 100kN - Rs 125000/ 3 samples
Cl-4.4, Table-3(Platform height h4)	-	500	-
Cl-4.4, Table-3(Minimum hole diameter d4)	-	500	-
Cl-4.4, Table-3(Traverse distance between hole centres f)	-	500	-
Cl-4.4, Table-4(Height from chain centre line h5)	-	500	-
Cl-4.4, Table-4(Minimum diameter of holes d4)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b8)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b5)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b10)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b9)	-	500	-
Cl-4.4, Table-5(Pin diameter Types “X” and “Y” d2)	-	500	-
Cl-5.3(Diametral dimensions of sprocket rim)	-	500	-
Cl-5.4(Sprocket tooth gap forms)	-	500	-
Cl-5.5(Tooth heights and tip diameters)	-	500	-
Cl-5.7(Radial run-out)	-	500	-
Cl-5.8(Axial run-out (wobble))	-	500	-
Cl-3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
Cl-3.3 Table-1,2(Measuring force)	-	500	-
Cl-3.3, 3.4.2 Table-1,2(Minimum tensile strength)	-	500	-
Cl-3.4.3(Preloading)	-	500	-
Cl-3.4.4(Length validation)	-	500	-
Cl-3.4.5(Dynamic testing)	-	500	-
Cl-4.4, Table-3(Platform height h4)	-	500	-
Cl-4.4, Table-3(Minimum hole diameter d4)	-	500	-
Cl-4.4, Table-3(Traverse distance between hole centres f)	-	500	-
Cl-4.4, Table-4(Height from chain centre line h5)	-	500	-
Cl-4.4, Table-4(Minimum diameter of holes d4)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b8)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b5)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b10)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b9)	-	500	-
Cl-4.4, Table-5(Pin diameter Types “X” and “Y” d2)	-	500	-
Cl-5.3(Diametral dimensions of sprocket rim)	-	500	-
Cl-5.4(Sprocket tooth gap forms)	-	500	-
Cl-5.5(Tooth heights and tip diameters)	-	500	-
Cl-5.7(Radial run-out)	-	500	-
Cl-5.8(Axial run-out (wobble))	-	500	-
Cl-5.10(Number of teeth)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
Cl-3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
Cl-3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
Cl-3.3 Table-1,2(Measuring force)	-	500	-
Cl-3.3, 3.4.2 Table-1,2(Minimum tensile strength)	-	500	-
Cl-3.4.3(Preloading)	-	500	-
Cl-3.4.4(Length validation)	-	500	-
Cl-3.4.5(Dynamic testing)	-	500	-
Cl-4.4, Table-3(Platform height h4)	-	500	-
Cl-4.4, Table-3(Minimum hole diameter d4)	-	500	-
Cl-4.4, Table-3(Traverse distance between hole centres f)	-	500	-
Cl-4.4, Table-4(Height from chain centre line h5)	-	500	-
Cl-4.4, Table-4(Minimum diameter of holes d4)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b8)	-	500	-
Cl-4.4, Table-5(Pin extension Type “X” b5)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b10)	-	500	-
Cl-4.4, Table-5(Pin extensiona Type “Y” b9)	-	500	-
Cl-4.4, Table-5(Pin diameter Types “X” and “Y” d2)	-	500	-
Cl-5.3(Diametral dimensions of sprocket rim)	-	500	-
Cl-5.4(Sprocket tooth gap forms)	-	500	-
Cl-5.5(Tooth heights and tip diameters)	-	500	-
Cl-5.7(Radial run-out)	-	500	-
Cl-5.8(Axial run-out (wobble))	-	500	-
Cl-5.10(Number of teeth)	-	500	-

10 Jan, 2027

-
Included w.e.f.03.06.2025 Exclusion Cl-5.6 (Sprocket rim profiles) Cl-5.9 (Pitch accuracy of sprocket teeth) Cl-5.11 (Bore tolerance)

2078

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 17786 (2022)

Medical Textiles Underpad Specification

6850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5, Table 1(Dimensions of underpad, mm)	-	500	-
Clause 6(WORKMANSHIP AND FINISH)	-	500	-
Clause 8.1(PH Value)	-	250	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	500	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	500	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	500	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	3600	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	500	-
Clause 8.3.3(" Good Manufacturing Practice Guideline for Hygiene Requirement")	-	0	-
Clause 5, Table 1(Dimensions of underpad, mm)	-	0	-
Clause 6(WORKMANSHIP AND FINISH)	-	0	-
Clause 8.1(PH Value)	-	0	-
Clause 8.2, Table 2, (i)(Minimum absorption capacity (ml))	-	0	-
Clause 8.2, Table 2, (ii)(Absorption Time, s/ml, Max)	-	0	-
Clause 8.2, Table 2, (iii)(Retention Capacity #, Min)	-	0	-
Clause 8.3.1(Bacterial and Fungal Bioburden)	-	0	-
Clause 8.3.2(Test for Common Skin Pathogen - Staphylococcus Aureus)	-	0	-
Clause 8.3.3(" Good Manufacturing Practice Guideline for Hygiene Requirement")	-	0	-

20 Feb, 2028

-
-

2079

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 17630 (2021)

Medical Textiles Bedsheet and Pillow Cover Specification

8550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(WORKMANSHIP AND FINISH)	-	500	-
6(GENERAL REQUIREMENTS - Fabric Washing & Tumble Drying)	-	0	-
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	200	-
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	300	-
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	200	-
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	500	-
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	500	-
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	500	-
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	500	-
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	250	-
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	3600	-
7.2(The performance requirements of reusable products shall have to be met after declared wash and sterilization cycle)	-	0	-
8.2(PACKAGING of Products STERILIZATION of Products)	-	500	-
9(MARKING)	-	500	-
5(WORKMANSHIP AND FINISH)	-	0	-
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	0	-
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	0	-
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	0	-
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	0	-
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	0	-
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	0	-
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	0	-
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	0	-
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	0	-
8.2(PACKAGING of Products STERILIZATION of Products)	-	0	-
9(MARKING)	-	0	-
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	500	-
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	0	-

20 Feb, 2028

-
-

2080

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 17349 (2020)

Medical textiles – Shoe covers – Specification

6100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Workmanship and finish)	-	500	-
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	3600	-
5.2 - Table 1 - (ii)(Tensile Strength)	-	500	-
5.2 - Table 1 - (iii)(Bursting Strength)	-	500	-
6(Packing)	-	500	-
7(Marking)	-	500	-
5(Requirements)	-	0	-
5.1(Workmanship and Finish)	-	0	-
5.2- Table 1- i)(Cleanliness – Microbial)	-	0	-
5.2- Table 1- ii)(Tensile strength)	-	0	-
5.2- Table 1- iii)(Bursting strength)	-	0	-
6(Packing)	-	0	-
7(Marking)	-	0	-
5.1(Workmanship and finish)	-	0	-
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	0	-
5.2 - Table 1 - (ii)(Tensile Strength)	-	0	-
5.2 - Table 1 - (iii)(Bursting Strength)	-	0	-
6(Packing)	-	0	-
7(Marking)	-	0	-
5(Requirements)	-	0	-
5.1(Workmanship and Finish)	-	0	-
5.2- Table 1- i)(Cleanliness – Microbial)	-	0	-
5.2- Table 1- ii)(Tensile strength)	-	0	-
5.2- Table 1- iii)(Bursting strength)	-	0	-
6(Packing)	-	0	-
7(Marking)	-	0	-

20 Feb, 2028

-
-

2081

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 9473 (2002)

Respiratory protective devices - Filtering half masks to protect against particles - Specification (First Revision)

62000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1(Material)	-	500	-
Cl 5.2(Cleaning and Disinfecting)	-	2000	-
Cl 5.3(Practical Performance Test)	-	2000	-
5.4.1.a(Total Inward Leakage (TC-5 Samples) )	-	2000	-
5.4.1.b(Total Inward Leakage (TC -5 Samples))	-	2000	-
5.4.1.a(Total Inward Leakage (AR-5 Samples) )	-	2000	-
5.4.1.b(Total lnward Leakage (AR- 5 Samples) )	-	2000	-
5.4.2(Penetration of Filter Material (MS-3 Samples) )	-	3000	-
5.4.2(Penetration of Filter Material (SW-3 Samples) )	-	3000	-
5.4.2(Penetration of Filter Material (TC-3 Samples) )	-	3000	-
5.4.2(Penetration of Filter Material (AR-3 Samples) )	-	3000	-
Cl 5.5(Compatibility with Skin)	-	500	-
Cl 5.6(Flammability)	-	4000	Flammability (As received condition) - Rs 2000 Flammability (Temperature condition) - Rs 2000
Cl 5.7(Carbon Dioxide Content of the Inhalation Air)	-	5000	-
Cl 5.8(Head Harness)	-	500	-
Cl 5.9(Field of Vision)	-	1500	-
Cl 5.10(Inhalation and Exhalation Valves)	-	8000	Inhalation & exhalation valves - Rs 3000 Exhalation valve Flow i)As received) - Rs 1000 ii)Temp conditioning - Rs 1000 Exhalation valve Tensile force i)As Received - Rs 1000 ii)Temp conditioning - Rs 1000 iii)Simulated wearing -Rs 1000
Cl 5.11(Breathing Resistance)	-	9000	As received - Rs 3000 Temp Conditioning -Rs 3000 Simulated Wearing - Rs 3000
Cl 5.12(Clogging (Coal & Dolomite))	-	6000	-
Cl 5.13(De-mountable Parts)	-	500	-
6.1(Packing)	-	500	-
6.2.1(Marking)	-	500	-
6.2.2(Marking)	-	500	-
7.0(Instructions for Use)	-	1000	-

20 Feb, 2028

-
-

2082

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 17423 (2020)

Medical textiles – Coveralls for COVID 19 – Specification

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 1)	-	4500	GST 18% Excluding.
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric from body Specimen 3)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 1)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Coverall Fabric at Seam Specimen 3)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 1)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover Fabric from body Specimen 3)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 1)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 2)	-	0	-
Table 1 & Cl.4.4, 5.2 and 5.3)(Blood Resistance Characteristics (Proceduce-C, table 1 IS 16546:2016) Shoe Cover of Seam Specimen 3)	-	0	-

20 Feb, 2028

-
-

2083

VIRIDIAN TESTING LABORATORIES LLP, TIRUPUR

6169806

IS 16289 (2014)

Medical textiles - Surgical face masks - Specification

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Materials and Construction)	-	500	-
4.1.2(Design)	-	500	-
4.2 Table 1 i)(Bacterial Filtration Efficiency)	-	8000	-
4.2 Table 1 ii)(Differential Pressure)	-	2500	-
4.2 Table 1 iii)(Splash Resistance)	-	6000	-
4.2 Table 1 iv)(Sub-micron particulate filtration efficiency at 0.1 µ)	-	10000	-

20 Feb, 2028

-
-

2084

Amit Test and Calibration Centre (8172006)

8172006

IS 7098 : Part 3 (1993)

Cross - Linked polyethylene insulated thermoplastic sheathed cables - Specification: Part 3 for working voltages from 66 kV up to and including 220 kV

395000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTOR)	-	500	-
5(INSULATION)	-	500	-
6(SCREENING)	-	500	-
7.1(MOISTURE BARRIER : Laminated Tape)	-	500	-
7.2(MOISTURE BARRIER : Lead Alloy Sheath)	-	500	-
7.3(MOISTURE BARRIER : Water Blocking Tape/Powder)	-	500	-
8.1(INNER SHEATH)	-	500	-
8.2(INNER SHEATH)	-	500	-
8.3(INNER SHEATH)	-	500	-
9.1(ARMOUR)	-	500	-
9.2(ARMOUR)	-	500	-
10.1(OUTER SHEATH)	-	500	-
10.2(OUTER SHEATH)	-	500	-
11.1(CONDUCTOR)	-	500	-
11.2(CONDUCTOR)	-	500	-
12.1(CONDUCTOR SCREENING )	-	500	-
12.2(CONDUCTOR SCREENING )	-	500	-
13.1(INSULATION)	-	500	-
13.2(INSULATION)	-	500	-
14.1(INSULATION SCREENING)	-	500	-
14.2.1(INSULATION SCREENING : Non-metallic Part)	-	500	-
14.2.3(INSULATION SCREENING : Non-metallic Part)	-	500	-
14.3.1(INSULATION SCREENING : Metallic Part)	-	500	-
14.3.2(INSULATION SCREENING : Metallic Part)	-	500	-
14.3.3(INSULATION SCREENING : Metallic Part)	-	500	-
15.1(MOISTURE BARRIER)	-	500	-
15.2.1(Metallic Sheath)	-	500	-
15.2.2(Metallic Sheath)	-	500	-
16.1(INNER SHEATH)	-	500	-
16.2(INNER SHEATH)	-	500	-
17.1(ARMOUR)	-	500	-
17.2(ARMOUR)	-	500	-
17.3(ARMOUR)	-	500	-
17.4(ARMOUR)	-	500	-
17.5(ARMOUR)	-	500	-
18.1(OUTER SHEATH)	-	500	-
18.2(outer sheath colour)	-	500	-
18.3.1(Thickness of Outer Sheath : Unarmoured Cables)	-	2500	-
18.3.1(Thickness of Outer Sheath : armoured Cables)	-	2500	-
19.1 A) I)(Tests on conductor : Annealing test ( for copper ))	-	2500	-
19.1 A) II)(Tests on conductor : Resistance test)	-	11000	-
19.1 b) I)(Test for thickness and dimensions of insulation)	-	5000	-
19.1 b) II)(Tensile strength and elongation at break)	-	5000	-
19.1 b) III)(Thermal ageing in air oven)	-	8000	-
19.1 b) IV)(Hot set test)	-	5000	-
19.1 b) V)(Shrinkage test)	-	3000	-
20.3(Test for concentric metallic screen : Test for concentric copper wire)	-	5000	-
20.4(Test for concentric copper tape)	-	5000	-
20.5(Thickness of metallic sheath)	-	3000	-
20.6(Tests for armouring material : Dimensions)	-	3000	-
19.1 f) II)(Tests for armouring material : Tensile strength and elongation at break)	-	2000	-
Table 9, (Measurement of thickness)	-	1000	-
19.1 g)2) i)(PVC sheath : Tensile strength and elongation at break)	-	2000	-
19.1 g)2) iii)(PVC sheath : Loss of mass)	-	5000	-
19.1 g)2) v)(PVC sheath : Hot deformation test)	-	2000	-
19.1 g)2) vi)(PVC sheath : Shrinkage test)	-	3000	-
19.1 g)2) vii)(PVC sheath : Thermal stability)	-	1500	-
19.1 g)3) ii)(PE sheath : Tensile strength and elongation at break before and after ageing)	-	2000	-
19.1 g)3) iii)(PE sheath : Hot-detormation)	-	2500	-
20.7(Flammabihty test ( for PVC outer sheathed cables only ))	-	3000	-
20.8.3(Water tightness test)	-	30000	-
20.9.1(Thermal ageing on complete cable sample)	-	11500	-
19.1 k) ii)(Tensile strength and elongation at breakfor insulation and outer sheath)	-	2500	-
20.2(Resistivity test for semi-conducting layer)	-	7000	-
20.11.1(Bending test followed by P D test)	-	65000	-
20.12, 20.18(Dielectric power factor and capacitance measurement at ambient temperature)	-	17000	-
20.13(Dielectric power factor measurement at elevated temperature)	-	17000	-
20.14.1(Load cycle test followed by P.D measurement)	-	70000	-
20.15(Impulse Voltage Test Followed by High Voltage Test)	-	60000	-
19.5(Check on Insulation Thickness Before the Electrical Type Tests)	-	3500	-
20.16.1(Test for Dimensions of Insulation : Insulation Thickness)	-	3500	-
20.16.2(Test for Dimensions of Insulation : Test for Eccentricity)	-	3500	-
20.16.3(Test for Dimensions of Insulation : Test for Ovality)	-	3500	-
20.17(High Voltage Test ( as Routine and Acceptance Tests ) )	-	23000	-
20.18(Measurement of Capacitance)	-	23000	-
14.2.2(INSULATION SCREENING : Non-metallic Part)	-	500	-
4.1(CONDUCTOR)	-	500	-
5(INSULATION)	-	500	-
6(SCREENING)	-	500	-
7.1(MOISTURE BARRIER : Laminated Tape)	-	500	-
7.2(MOISTURE BARRIER : Lead Alloy Sheath)	-	500	-
7.3(MOISTURE BARRIER : Water Blocking Tape/Powder)	-	500	-
8.1(INNER SHEATH)	-	500	-
8.2(INNER SHEATH)	-	500	-
8.3(INNER SHEATH)	-	500	-
9.1(ARMOUR)	-	500	-
9.2(ARMOUR)	-	500	-
10.1(OUTER SHEATH)	-	500	-
10.2(OUTER SHEATH)	-	500	-
11.1(CONDUCTOR)	-	500	-
11.2(CONDUCTOR)	-	500	-
12.1(CONDUCTOR SCREENING )	-	500	-
12.2(CONDUCTOR SCREENING )	-	500	-
13.1(INSULATION)	-	500	-
13.2(INSULATION)	-	500	-
14.1(INSULATION SCREENING)	-	500	-
14.2.1(INSULATION SCREENING : Non-metallic Part)	-	500	-
14.2.3(INSULATION SCREENING : Non-metallic Part)	-	500	-
14.3.1(INSULATION SCREENING : Metallic Part)	-	500	-
14.3.2(INSULATION SCREENING : Metallic Part)	-	500	-
14.3.3(INSULATION SCREENING : Metallic Part)	-	500	-
15.1(MOISTURE BARRIER)	-	500	-
15.2.1(Metallic Sheath)	-	500	-
15.2.2(Metallic Sheath)	-	500	-
16.1(INNER SHEATH)	-	500	-
16.2(INNER SHEATH)	-	500	-
17.1(ARMOUR)	-	500	-
17.2(ARMOUR)	-	500	-
17.3(ARMOUR)	-	500	-
17.4(ARMOUR)	-	500	-
17.5(ARMOUR)	-	500	-
18.1(OUTER SHEATH)	-	500	-
18.2(outer sheath colour)	-	500	-
18.3.1(Thickness of Outer Sheath : Unarmoured Cables)	-	2500	-
18.3.1(Thickness of Outer Sheath : armoured Cables)	-	2500	-
19.1 A) I)(Tests on conductor : Annealing test ( for copper ))	-	2500	-
19.1 A) II)(Tests on conductor : Resistance test)	-	11000	-
19.1 b) I)(Test for thickness and dimensions of insulation)	-	5000	-
19.1 b) II)(Tensile strength and elongation at break)	-	5000	-
19.1 b) III)(Thermal ageing in air oven)	-	8000	-
19.1 b) IV)(Hot set test)	-	5000	-
19.1 b) V)(Shrinkage test)	-	3000	-
20.3(Test for concentric metallic screen : Test for concentric copper wire)	-	5000	-
20.4(Test for concentric copper tape)	-	5000	-
20.5(Thickness of metallic sheath)	-	3000	-
20.6(Tests for armouring material : Dimensions)	-	2000	-
19.1 f) II)(Tests for armouring material : Tensile strength and elongation at break)	-	1000	-
Table 9, (Measurement of thickness)	-	2000	-
19.1 g)2) i)(PVC sheath : Tensile strength and elongation at break)	-	2000	-
19.1 g)2) iii)(PVC sheath : Loss of mass)	-	5000	-
19.1 g)2) v)(PVC sheath : Hot deformation test)	-	2000	-
19.1 g)2) vi)(PVC sheath : Shrinkage test)	-	3000	-
19.1 g)2) vii)(PVC sheath : Thermal stability)	-	1500	-
19.1 g)3) ii)(PE sheath : Tensile strength and elongation at break before and after ageing)	-	2000	-
19.1 g)3) iii)(PE sheath : Hot-detormation)	-	2500	-
20.7(Flammabihty test ( for PVC outer sheathed cables only ))	-	3000	-
20.8.3(Water tightness test)	-	30000	-
20.9.1(Thermal ageing on complete cable sample)	-	11500	-
19.1 k) ii)(Tensile strength and elongation at breakfor insulation and outer sheath)	-	2500	-
20.2(Resistivity test for semi-conducting layer)	-	7000	-
20.11.1(Bending test followed by P D test)	-	65000	-
20.12, 20.18(Dielectric power factor and capacitance measurement at ambient temperature)	-	17000	-
20.13(Dielectric power factor measurement at elevated temperature)	-	17000	-
20.14.1(Load cycle test followed by P.D measurement)	-	70000	-
20.15(Impulse Voltage Test Followed by High Voltage Test)	-	60000	-
19.5(Check on Insulation Thickness Before the Electrical Type Tests)	-	3500	-
20.16.1(Test for Dimensions of Insulation : Insulation Thickness)	-	3500	-
20.16.2(Test for Dimensions of Insulation : Test for Eccentricity)	-	3500	-
20.16.3(Test for Dimensions of Insulation : Test for Ovality)	-	3500	-
20.17(High Voltage Test ( as Routine and Acceptance Tests ) )	-	23000	-
20.18(Measurement of Capacitance)	-	23000	-
14.2.2(INSULATION SCREENING : Non-metallic Part)	-	500	-

16 Apr, 2026

-
Included w.e.f 04.07.2025 Exclusion: Above 66 kv for the following clauses, Testing Facility for Cl.20.17 (High Voltage Test ( as Routine and Acceptance Tests ) ), Cl. 20.18 (Measurement of Capacitance), Cl. 20.15 (Impulse Voltage Test Followed by High Voltage Test), Cl. 20.14.1 (Load cycle test followed by P.D measurement), Cl. 20.13 (Dielectric power factor measurement at elevated temperature), Cl. 20.12, 20.18 (Dielectric power factor and capacitance measurement at ambient temperature), Cl. 20.11.1 (Bending test followed by P D test)

2085

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 16805 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Secondary Lithium Cells and Batteries, for Use in Industrial Applications

260000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General Safety Considerations)	-	5000	10% discount for BIS
7.1(Charging Procedures For Test Purposes)	-	25000	10% discount for BIS
7.2.1(External Short-Circuit Test)	-	25000	10% discount for BIS
7.2.2(Impact Test)	-	10000	10% discount for BIS
7.2.3(Drop Test)	-	10000	10% discount for BIS
7.2.4(Thermal Abuse Test)	-	20000	10% discount for BIS
7.2.5(Overcharge Test)	-	20000	10% discount for BIS
7.2.6(Forced Discharge Test)	-	25000	10% discount for BIS
7.3.2(Internal short-circuit test)	-	25000	10% discount for BIS
7.3.3(Propagation Test)	-	25000	10% discount for BIS
8(Battery System Safety)	-	60000	10% discount for BIS
9(Information For Safety)	-	5000	10% discount for BIS
10(Marking and Designation)	-	5000	10% discount for BIS
5(General Safety Considerations)	-	-	-
7.1(Charging Procedures For Test Purposes)	-	-	-
7.2.1(External Short-Circuit Test)	-	-	-
7.2.2(Impact Test)	-	-	-
7.2.3(Drop Test)	-	-	-
7.2.4(Thermal Abuse Test)	-	-	-
7.2.5(Overcharge Test)	-	-	-
7.2.6(Forced Discharge Test)	-	-	-
7.3.2(Internal short-circuit test)	-	-	-
7.3.3(Propagation Test)	-	-	-
8(Battery System Safety)	-	-	-
9(Information For Safety)	-	-	-
10(Marking and Designation)	-	-	-

31 Dec, 2026

-
Included w.e.f. 04.04.2025

2086

ATCC TEST LABS LLP

8172626

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	-
12.3, Table-1(Breaking load before stranding)	-	500	-
12.3, Table-1(Breaking load after stranding)	-	1000	-
12.4(Wrapping test)	-	500	-
12.5, Table 1(Resistance test)	-	1000	-
12.6, Table 3(Measurement of lay ratio)	-	500	-
9.3(Stranding)	-	500	-
6(Freedom from defects)	-	500	-
7.2.1(Sizes)	-	500	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	-
9.2(Lay ratio)	-	500	-
9.4(Multiple layer of wires)	-	500	-
4.1(Resistivity)	-	500	-
4.2(Density)	-	500	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	-
4.4(Coefficient of Linear Expansion)	-	1000	-
5(Material)	-	500	-
7.1.1(Nominal Sizes)	-	500	-
7.2.2(Resistance)	-	1000	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	-
12.3, Table-1(Breaking load before stranding)	-	500	-
12.3, Table-1(Breaking load after stranding)	-	500	-
12.4(Wrapping test)	-	500	-
12.5, Table 1(Resistance test)	-	500	-
12.6, Table 3(Measurement of lay ratio)	-	500	-
9.3(Stranding)	-	500	-
6(Freedom from defects)	-	500	-
7.2.1(Sizes)	-	500	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	-
9.2(Lay ratio)	-	500	-
9.4(Multiple layer of wires)	-	500	-
4.1(Resistivity)	-	500	-
4.2(Density)	-	500	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	-
4.4(Coefficient of Linear Expansion)	-	1000	-
5(Material)	-	500	-
7.1.1(Nominal Sizes)	-	500	-
7.2.2(Resistance)	-	1000	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	-
12.3, Table-1(Breaking load before stranding)	-	500	-
12.3, Table-1(Breaking load after stranding)	-	1000	-
12.4(Wrapping test)	-	500	-
12.5, Table 1(Resistance test)	-	1000	-
12.6, Table 3(Measurement of lay ratio)	-	500	-
9.3(Stranding)	-	500	-
6(Freedom from defects)	-	500	-
7.2.1(Sizes)	-	500	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	-
9.2(Lay ratio)	-	500	-
9.4(Multiple layer of wires)	-	500	-
4.1(Resistivity)	-	500	-
4.2(Density)	-	500	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	-
4.4(Coefficient of Linear Expansion)	-	1000	-
5(Material)	-	500	-
7.1.1(Nominal Sizes)	-	500	-
7.2.2(Resistance)	-	1000	-

15 Jun, 2026

-
Included w.e.f.13.05.2025

2087

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS/IEC 60529 (2001)

Degrees of protection provided by enclosures (IP Code)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Degrees of protection against access to hazardous parts and against solid foreign objects indicated by the first characteristic numeral)	-	11000	Rs. 11000 per IP Numeral
Cl-5.1(Protection against access to hazardous parts)	-	11000	Rs. 11000 per IP Numeral
Cl-5.2(Protection against solid foreign objects)	-	11000	Rs. 11000 per IP Numeral
Cl-6(Degrees of protectlon against ingress of water indicated 'by the second characteristic numeral)	-	11000	Rs. 11000 per IP Numeral
Cl-7(Degrees of protection against access to hazardous parts indicated by the additional letter)	-	11000	Rs. 11000 per IP Numeral
Cl-8(Supplementary letter)	-	11000	Rs. 11000 per IP Numeral
Cl-10(Marking)	-	11000	Rs. 11000 per IP Numeral

05 Apr, 2027

-
Included w.e.f.09.04.2025

2088

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

59000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.1(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.3(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.4(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.6(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.7(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.8(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.11(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.12(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.13(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.14(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.15(Marking- IS 302-1)	-	0	Testing charges included in Cl 7.1
7.101(Marking)	-	0	Testing charges included in Cl 7.1
8( Protection Against Electric Shock, IS 302-1)	-	2000	-
10(Power Input and Current, IS 302-1)	-	2000	-
11(Heating, IS 302-1)	-	4000	-
11(Heating, IS 302-1)	-	0	Testing charges included in Cl 11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl 11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl 11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl 11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl 11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl 11
11(Heating, IS 302-1)	-	0	Testing charges included in Cl 11
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	Testing charges included in Cl 11
14(Transient Over Voltages, IS 302-1)	-	2000	-
15.1(Moisture Resistance, IS 302-1)	-	4000	-
15.2(Moisture Resistance, IS 302-1)	-	0	Testing charges included in Cl 15.1
15.3(Moisture Resistance, IS 302-1)	-	0	Testing charges included in Cl 15.1
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	0	Testing charges included in Cl 16
19.4(Abnormal Operation, IS 302-1)	-	0	Testing charges included in Cl 19.1
19.4(Abnormal Operation, IS 302-1)	-	0	Testing charges included in Cl 19.1
19.5(Abnormal Operation, IS 302-1)	-	0	Testing charges included in Cl 19.1
19.5(Abnormal Operation, IS 302-1)	-	0	Testing charges included in Cl 19.1
19.7(Abnormal Operation)	-	0	Testing charges included in Cl 19.1
19.9(Abnormal Operation)	-	0	Testing charges included in Cl 19.1
19.1(Abnormal Operation)	-	5000	-
19.101(Abnormal Operation)	-	0	Testing charges included in Cl 19.1
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	3500	-
21.2(Mechanical Strength, IS 302-1)	-	0	Testing charges included in Cl 21.1
21.101(Mechanical Strength, IS 302-2-3)	-	0	Testing charges included in Cl 21.1
22(Construction, IS 302-1)	-	7000	-
22.101(Construction)	-	0	Testing charges included in Cl 22
22.102(Construction)	-	0	Testing charges included in Cl 22
22.103(Construction)	-	0	Testing charges included in Cl 22
22.104(Construction)	-	0	Testing charges included in Cl 22
22.105(Construction)	-	0	Testing charges included in Cl 22
22.106(Construction)	-	0	Testing charges included in Cl 22
22.107(Construction)	-	0	Testing charges included in Cl 22
23.1(Internal Wiring, IS 302-1)	-	2000	-
23.2(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23.1
23.3(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23.1
23.4(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23.1
23.5(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23.1
23.6(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23.1
23.7(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23.1
23.8(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23.1
23.9(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23.1
23.10(Internal Wiring, IS 302-1)	-	0	Testing charges included in Cl 23.1
24.1(Components, IS 302-1)	-	5000	-
24.2(Components, IS 302-1)	-	0	Testing charges included in Cl 24.1
24.4(Components, IS 302-1)	-	0	Testing charges included in Cl 24.1
24.5(Components, IS 302-1)	-	0	Testing charges included in Cl 24.1
24.6(Components, IS 302-1)	-	0	Testing charges included in Cl 24.1
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 26
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	2000	-
27.2(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl 27
27.3(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl 27
27.4(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl 27
27.5(Provision for Earthing, IS 302-1)	-	0	Testing charges included in Cl 27
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	2000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	Testing charges included in Cl 29.1
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	2000	-
31(Resistance of Rusting, IS 302-1)	-	0	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	0	-
4(General requirement)	-	0	-
16(Leakage current and electric strength)	-	0	Testing charges included in Cl 16
17(Overload protection of transformers and associated circuits)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
19(Abnormal operation)	-	0	Testing charges included in Cl 19
25(Supply Connection and External Flexible Cords)	-	0	Testing charges included in Cl 25.1
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Testing charges included in Cl 25.1

31 Dec, 2026

-
Included w.e.f.20.06.2025 Exclusion (EMI/EMC)Cl 19.11.4.1 TO Cl 19.11.4.7

2089

ATCC TEST LABS LLP

8172626

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	1000	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	500	-
5.1(Insulation)	-	500	-
6.1(Flexibility class)	-	500	-
6.2(Compactness)	-	500	-
6.2(No of strands)	-	500	-
6.2(Surface)	-	500	-
6.3(Protective barrier)	-	500	-
6.4(size of street lighting conductor)	-	500	-
6.5(Size of messenger conductor )	-	500	-
6.6(Joints in messenger conductor )	-	500	-
6.6(Direction of outer layer)	-	500	-
7.1(Insulation)	-	500	-
7.2( Thickness of insulation)	-	500	-
7.3(Tolerance on thickness of insulation )	-	500	-
7.4(Aplication of the insulation )	-	500	-
7.5(Colour of the insulation )	-	500	-
8.1(Core identification)	-	100	10
8.2(Core identification)	-	100	-
8.3(Identification by other means)	-	100	-
9.1(Assembly (Laying up))	-	100	-
9.2(Assembly (Laying up))	-	100	-
9.3(Direction of lay)	-	100	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	500	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	500	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	500	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	500	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	500	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	500	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	500	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	500	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	500	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	500	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	500	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	500	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	500	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	500	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	500	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	500	-
10.1 g)(High voltage test - IS10810:Part 45)	-	500	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	-
11.4(Bending Test on the Completed Cable ( Optional))	-	500	-
10.1 d) iii)(Carbon Black Content)	-	500	-
6.1(Construction of phase conductor)	-	500	-
6.1(Number of wires (phase conductor))	-	500	-
6.1(Construction of Street Lighting conductor)	-	500	-
6.1(Number of wires (Street Lighting conductor))	-	500	-
12.1(Manufacturer's Identification)	-	500	-
12.2(Cable Identification)	-	500	-
4.1(Phase/Street Lighting conductor)	-	500	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	500	-
5.1(Insulation)	-	500	-
6.1(Flexibility class)	-	500	-
6.2(Compactness)	-	500	-
6.2(No of strands)	-	500	-
6.2(Surface)	-	500	-
6.3(Protective barrier)	-	500	-
6.4(size of street lighting conductor)	-	500	-
6.5(Size of messenger conductor )	-	500	-
6.6(Joints in messenger conductor )	-	500	-
6.6(Direction of outer layer)	-	500	-
7.1(Insulation)	-	500	-
7.2( Thickness of insulation)	-	500	-
7.3(Tolerance on thickness of insulation )	-	500	-
7.4(Aplication of the insulation )	-	500	-
7.5(Colour of the insulation )	-	500	-
8.1(Core identification)	-	500	-
8.2(Core identification)	-	500	-
8.3(Identification by other means)	-	500	-
9.1(Assembly (Laying up))	-	500	-
9.2(Assembly (Laying up))	-	500	-
9.3(Direction of lay)	-	500	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	500	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	500	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	500	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	500	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	2000	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	2000	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1000	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	1000	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	500	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	500	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	500	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	500	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	500	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	500	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	500	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	500	-
10.1 g)(High voltage test - IS10810:Part 45)	-	500	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	-
11.4(Bending Test on the Completed Cable ( Optional))	-	500	-
10.1 d) iii)(Carbon Black Content)	-	500	-
6.1(Construction of phase conductor)	-	500	-
6.1(Number of wires (phase conductor))	-	500	-
6.1(Construction of Street Lighting conductor)	-	500	-
6.1(Number of wires (Street Lighting conductor))	-	500	-
12.1(Manufacturer's Identification)	-	500	-
12.2(Cable Identification)	-	500	-
4.1(Phase/Street Lighting conductor)	-	500	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	500	-
5.1(Insulation)	-	500	-
6.1(Flexibility class)	-	500	-
6.2(Compactness)	-	500	-
6.2(No of strands)	-	500	-
6.2(Surface)	-	500	-
6.3(Protective barrier)	-	500	-
6.4(size of street lighting conductor)	-	500	-
6.5(Size of messenger conductor )	-	500	-
6.6(Joints in messenger conductor )	-	500	-
6.6(Direction of outer layer)	-	500	-
7.1(Insulation)	-	500	-
7.2( Thickness of insulation)	-	500	-
7.3(Tolerance on thickness of insulation )	-	500	-
7.4(Aplication of the insulation )	-	500	-
7.5(Colour of the insulation )	-	500	-
8.1(Core identification)	-	500	-
8.2(Core identification)	-	500	-
8.3(Identification by other means)	-	500	-
9.1(Assembly (Laying up))	-	500	-
9.2(Assembly (Laying up))	-	500	-
9.3(Direction of lay)	-	500	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	500	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	500	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	500	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	500	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	2000	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	2000	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1000	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	1000	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	500	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	500	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	3000	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	500	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	500	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	500	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	500	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	500	-
10.1 g)(High voltage test - IS10810:Part 45)	-	1000	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	-
11.4(Bending Test on the Completed Cable ( Optional))	-	500	-
10.1 d) iii)(Carbon Black Content)	-	500	-
6.1(Construction of phase conductor)	-	500	-
6.1(Number of wires (phase conductor))	-	500	-
6.1(Construction of Street Lighting conductor)	-	500	-
6.1(Number of wires (Street Lighting conductor))	-	500	-
12.1(Manufacturer's Identification)	-	500	-
12.2(Cable Identification)	-	500	-

15 Jun, 2026

-
Included w.e.f.13.05.2025

2090

BIS, Central Laboratory (CL)

None

IS 1475 (2024)

Drinking Water Coolers - Specification (Fourth Revision)

Sample quantity required : 2 piece

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Classification)	-
5 (Construction)	-
14 a) (Protection against electric shock)	-
14 b) (High voltage (electric strength) test)	-
14 c) (Leakage current tests)	-
14 d) (Provision for earthing)	-

-
Testing facility available only parameters for: 1.Protection against electric shock (Clause 8 of IS 302-1) 2.High voltage (electric strength) test (Clause 13.3 of IS 302-1) 3.Leakage current tests (Clause 13.2 of IS 302-1) 4.Provision for earthing (Clause 27.5 of IS 302-1)

2091

BIS, Central Laboratory (CL)

None

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

Please see remarks View breakup
For stranded conductors with 7 strands - Rs 4200 For stranded conductors with 19 strands - 22 hrs Rs 6600 For stranded conductors with 37 strands- 30 hrs Rs 9000 For stranded conductors with 61 strands- 50 hrs Rs 15000

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
16.2 (Visual Examination)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.4, Table 2 (Measurement of Diameter of Individual Aluminium Alloy Wires)	-
16.5, Table 2 (Breaking Load Test - before stranding)	-
16.5, Table 2 (Breaking Load Test - after stranding)	-
16.6, Table 1 (Elongation Test - before stranding)	-
16.6, Table 1 (Elongation Test - after stranding)	-
16.7, Table 2 (Resistivity Test)	-
16.8 (Wrapping Test)	-
11 (Stranding)	-
8 (Freedom from defects)	-
16.10, Table 3 (d.c. Resistance Test on Stranded Conductor)	-

-
Test facility complete up to size 100 sq.mm, Test facility not available above size 100 sq.mm (Ultimate tensile strength test, DC resistance test, Stress-strain test on conductor )

2092

BIS, Central Laboratory (CL)

None

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6.1 (Dimensions (length))	-
Cl-6.2 (Thickness)	-
Cl-6.3 (Squareness)	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6 (Workmanship and finish)	-
Cl-9.3 (Moisture Content)	-
Cl-9.4.2 (Glue Adhesion in Dry State- Adhesion of Plies)	-
Cl-9.4.1 (Glue Adhesion in Dry State- Glue Shear Strength -Average)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-
Cl-9.6 (Tensile Strength-Along the grain)	-
Cl-9.7 (Mycological Test -Adhesion)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9.9, Table-3 (i) a (Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-
Cl-9.9, Table-3 (i) b (Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-
Cl-9.4.2 (Adhesion of Plies)	-
5.1.1 (Defects in veneers)	-
Cl-9.10 (Retention of Preservative)	-
Cl-9.11 (Formaldehyde Content Test)	-

-
(Test facility not available in CL)- Cl 9.8 Static Bending Strength Above 15 mm thickness, Cl 9.9 Wet Bending Strength Above 15 mm thickness, Steady State Formaldehyde Emission Test (Cl. 9.12) Sample Qty required for testing: 1 Full Sheet

2093

Indian Institute of Packaging (IIP), Mumbai

7118404

IS 17427 (2020)

Wooden ( Timber ) Pallets for Packaging, Storage and Transportation ” Specification

20400 View breakup
-

Clause No.	Exclusion	Remark
4.1(CLASSIFICATION OF PALLETS)	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Cross grains(Grade-1))	-	-
6.1(a)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number(Grade-1))	-	-
6.1(b)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number(Grade-1))	-	-
6.1(c)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number(Grade-1))	-	-
6.1(d)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number(Grade-1))	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Checks(Grade-1))	-	-
6.1("Limitation of Timber Defects for Nonexpandable Pallet-Splits and shakes (sizes, location and number)(Grade-1)")	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Warp(Grade-1))	-	-
6.1("Limitation of Timber Defects for Nonexpandable Pallet-Wane (size, location and number)(Grade-1)")	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Decay(Grade-1))	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Stain(Grade-1))	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Moisture Containt(Grade-1))	-	-
6.1(Limitation of Timber Defects for Nonexpandable Pallet-Cross grains(Grade-2))	-	-
6.1(a)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number)(Grade-2))	-	-
6.1(b)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number)(Grade-2))	-	-
6.1(c)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number)(Grade-2))	-	-
6.1(d)(Limitation of Timber Defects for Nonexpandable Pallet-Knots (size, location and number)(Grade-2))	-	-
6.2(Limitation of Timber defects for Expandable pallets)	-	-
6.3(Limitation of Timber Defects for Nonexpandable Pallet-Checks(Grade-2))	-	-
6.3(Limitation of Timber Defects for Nonexpandable Pallet-Splits and shakes (sizes, location and number)(Grade-2))	-	-
6.3(Limitation of Timber Defects for Nonexpandable Pallet-Warp(Grade-2))	-	-
6.3("Limitation of Timber Defects for Nonexpandable Pallet-Wane (size, location and number)(Grade-2)")	-	-
6.3(Limitation of Timber Defects for Nonexpandable Pallet-Decay(Grade-2))	-	-
6.3(Limitation of Timber Defects for Nonexpandable Pallet-Stain(Grade-2))	-	-
6.3(Limitation of Timber defects for Expandable pallets-Dimensions of components)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Surfacing)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Skip dressing)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Cross cutting)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Deckboard spacing)	-	-
6.3("Limitation of Timber defects for Expandable pallets-Parallelism of deviation deck boards ")	-	-
6.3(Limitation of Timber defects for Expandable pallets-Fastener splits)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Protruding fastener heads and points)	-	-
6.3(Limitation of Timber defects for Expandable pallets-Dimensions of assembled pallet)	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Dimensions of components(Grade 1)")	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Surfacing (Grade 1))	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Skip dressing(Grade 1))	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Cross cutting(Grade 1))	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Deckboard spacing(Grade 1)")	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Parallelism of deckboards(Grade 1)")	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Dimensions of components(Grade 2)")	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Surfacing (Grade 2))	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Surfacing (Grade 2))	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Skip dressing(Grade 2))	-	-
6.4(Workmanship for Non-Expandable Wooden Palletsd-Defects-Cross cutting(Grade 2))	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Deckboard spacing(Grade 2)")	-	-
6.4("Workmanship for Non-Expandable Wooden Palletsd-Defects-Parallelism of deckboards(Grade 2)")	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
8(FASTENERS)	-	-
9.1(Number of driven fasteners-Deckbord (width< 130))	-	-
9.1(Number of driven fasteners-Deckbord (width 313 to 175))	-	-
9.1(Number of driven fasteners-Deckbord (width 176 to 200))	-	-
9.1(Number of driven fasteners-Comer block)	-	-
9.1(Number of driven fasteners-Interior block)	-	-
9.2(Fastener Placement)	-	-
9.2(Fastener Placement)	-	-
9.2(Fastener Placement)	-	-
9.2(Fastener Placement)	-	-
9.2(Fastener Placement)	-	-
9.2(Fastener Placement)	-	-
9.3(Clinching Points of Driven Fasteners)	-	-
9.4(Fasteners-caused Splits)	-	-
9.5(Protruding Fasteners)	-	-
9.5(Protruding Fasteners)	-	-
9.5(Protruding Fasteners)	-	-
9.5(Protruding Fasteners)	-	-
10(DIMENSIONS OF PALLETS-Length)	-	-
10(DIMENSIONS OF PALLETS-Width)	-	-
10(DIMENSIONS OF PALLETS-Height)	-	-
10.1(Dimensions of Wings(1200 ×1800 mm pallet))	-	-
10.1(Dimensions of Wings (other size of pallets))	-	-
10.2(Height of the Pallet and Height of Loaded Pallet)	-	-
10.2(Height of the Pallet and Height of Loaded Pallet)	-	-
10.3(Height of Pallet with Cargo Loading)	-	-
10.3(Height of Pallet with Cargo Loading)	-	-
10.1.1(CONSTRUCTION AND DESIGN OF PALLETS-Single-deck Pallet (Recommended for Dunnage))	-	-
10.1.2(CONSTRUCTION AND DESIGN OF PALLETS-Double-deck Pallet)	-	-
10.1.3(CONSTRUCTION AND DESIGN OF PALLETS-Reversible Pallet)	-	-
10.1.4(CONSTRUCTION AND DESIGN OF PALLETS-Non-reversible Pallet)	-	-
10.1.5(CONSTRUCTION AND DESIGN OF PALLETS-Two-way Pallet)	-	-
10.1.6(CONSTRUCTION AND DESIGN OF PALLETS-Four-way Pallet)	-	-
10.1.7(CONSTRUCTION AND DESIGN OF PALLETS-Overlap pallet)	-	-
10.1.8(CONSTRUCTION AND DESIGN OF PALLETS-Wing)	-	-
10.1.9(CONSTRUCTION AND DESIGN OF PALLETS- Notched Stringer Pallet)	-	-
10.1.10("CONSTRUCTION AND DESIGN OF PALLETS-Perimeter-base Pallet ")	-	-
13(1)(Stacking test (Static load)-Stacking)	-	-
13(2)-a(Bending test (Stiffness Flexural strength)-Racking)	-	-
13(2)-b(Bending test (Stiffness Flexural strength)-Racking)	-	-
13(3)(Bottom deck test (Stiffness and Flexural strength of the bottom deck boards between support points)-Racking)	-	-
13(4)(Inclined impact plane test(Shear test)-Distortion resistance)	-	-
13(5)-a(Incline plane test (Leading edge impact test)-Resistance to fork arm)	-	-
13(5)-b(Incline plane test (Leading edge impact test)-Resistance to fork arm)	-	-
13(6)(Incline plane test (Block impact test)-Resistance to fork tip)	-	-
13(7)(Corner drop test-Resistance to Impact)	-	-
13(8)(Compression test-Any activity that compresses blocks or stringers including stacking)	-	-
13(9)(Fork Lifting test-Lifting with forklift and pallet trucks.)	-	-

30 Jun, 2028

-
Included w.e.f 20.06.2025

2094

Unique Test House LLP, MOHALI

9134536

IS 13095 (2020)

Butterfly Valves for General Purposes ( First Revision )

UPTO 1000 MM

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(VALVE END CONNECTIONS)	-	200	-
6.0( NOMINAL SIZES )	-	200	-
7.0(NOMINAL PRESSURES)	-	100	-
7.2(Class designations)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Flange-b)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-d4)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges-IS 6418 (Table 2/3/6/7/10)- Rasied Face-f)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Bolting )	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -Nos. )	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -d2)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Drilling -k)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck -d3)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Neck- r)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-b)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-d4)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Rasied Face-f)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Bolting)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -Nos. )	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -d2 )	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Drilling -k)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck -d3)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Neck-r)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - D)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Flange - b)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - d4)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Raised Face - f)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Bolting)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling - Nos.)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -d2)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Drilling -k)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange -D)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange - b)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - d4)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Raised Face - f)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Bolting)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling - Nos.)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -d2)	-	100	-
9-Annex B(BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Drilling -k)	-	100	-
9.1.1 ( Double Flanged Body Ends)	-	100	-
9.2.2(Wafer Body Ends)	-	100	-
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-	200	-
11.0(Bodies)	-	100	-
12.0(DISC AND SHAFT)	-	200	-
13.0(SEATING AND LININGS)	-	200	-
14.0(BEARINGS)	-	100	-
14.2(BEARINGS)	-	100	-
14.3(BEARINGS)	-	200	-
16.0(OPERATION)	-	100	-
17.1(Performance Testing)	-	100	-
17.2(Body Test)	-	200	-
17.3(Seat Test)	-	100	-
17.4(Disc Strength Test)	-	200	-
Cl. 15 Table 2(Materials)	-	100	-
5.0(SERVICE APPLICATIONS)	-	200	-

07 Sep, 2025

-
-

2095

Unique Test House LLP, MOHALI

9134536

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

Upto600mm( 600mmto2540mmwithout h.s.t) /FE 330toFE450

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Hydaulic pressure test)	-	1500	---
12.3.3(Ovality)	-	500	...
8.1 Table 2 Table 3(Carbon Content IS 228)	-	800	....
8.1 Table 2 Table 3(Manganese Content IS 228)	-	800	....
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	800	....
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	800	...
9.3(Guided bend test(For SAW Pipes))	-	800	...
11.1, Table 5.(Outside Diameter (OD))	-	500	...
11.1, Table 5.(Thickness)	-	500	...
11.1, Table 5.(Mass)	-	500	...
12.5(Strightness)	-	500	...
14.1(Visual inspection, Appearance and Workmanship)	-	200	...
8.1(CE)	-	800	....
9.2.3(Flattening Test for seamless pipes)	-	800	-
9.2.1(Flattening test for ERW pipes )	-	800	-
9.1(Tensile test-Yield Strength)	-	500	....
9.1(Tensile test-Strength)	-	800	...
9.1(Tensile test- Elongation)	-	800	...
14.2(Visual inspection, Appearance and Workmanship)	-	200	-
14.3(Visual inspection, Appearance and Workmanship)	-	200	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	200	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	200	-

07 Sep, 2025

-
-

2096

Robust Testing Solutions Private Limited, Alwar

8173526

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

5 kVA to 2500 kVA, 11kV, 22kV and 33kV

115000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 a)(Measurement of winding resistance )	-	7000	-
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	5500	-
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	5500	-
21.2 d)(Measurement of no-load loss and current)	-	3500	-
21.2 e)(Measurement of insulation resistance)	-	2500	-
21.2 f)(Induced over-voltage withstand test)	-	4500	-
21.2 g)( Separate-source voltage withstand test)	-	4000	-
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	7000	-
21.5.3.3(Oil leakage test)	-	8000	-
21.3(a )(Lightning impulse test)	-	38000	-
21.3(b)(Temperature-rise test)	-	22000	-
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	7000	-
21.4 a)( Determination of sound levels)	-	0	-
21.4 c(No load current at 112.5 percent voltage.)	-	1000	-
21.4 e(BDV and moisture content of oil in the transformer)	-	8000	-
13(Marking )	-	0	-
13.1(Marking (Rating Plates))	-	0	-
13.2(Terminal Marking Plate)	-	0	-
13.3(Marking )	-	0	-
13.4(Marking)	-	0	-
13.4.1(Marking)	-	0	-
14.1(MOUNTING ARRANGEMENT)	-	0	-
14.2(MOUNTING ARRANGEMENT)	-	0	-
14.3(MOUNTING ARRANGEMENT)	-	0	-
14.4(MOUNTING ARRANGEMENT)	-	0	-
15.1.1(TRANSFORMER TANK : Construction)	-	0	-
15.1.2(TRANSFORMER TANK : Construction)	-	0	-
15.1.3(TRANSFORMER TANK : Construction)	-	0	-
15.1.4(TRANSFORMER TANK : Construction)	-	0	-
15.1.5(TRANSFORMER TANK : Construction)	-	0	-
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	8000	-
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	8000	-
21.5.2.3( Oil leakage test (routine test))	-	8000	-
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	6000	-
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	6000	-
21.5.3.3(Oil leakage test (routine test))	-	8000	-
21.4 d(Paint adhesion tests)	-	0	-
15.5(Total Dry Film Paint Thickness)	-	0	-
6.9, 7.9, 8.9(Permissible Flux Density and Over Fluxing)	-	0	-
11(Minimum Clearnaces air )	-	0	-
16(Conservator for Non-sealed type Transformers)	-	0	-
20(Fittings)	-	0	-
6.8 (100%)(Total losses at 100 % load (Watts))	-	0	-
7.8 (50%)(Total losses at 50 % load (Watts))	-	0	-
8.8 (50%)(Total losses at 50 % load (Watts))	-	0	-
7.8 (100%)(Total losses at 100 % load (Watts))	-	0	-
8.8 (100%)(Total losses at 100 % load (Watts))	-	0	-
21.5.1.3(Oil leakage test upto 200 KVA)	-	7000	-
9.1a)(CRGO Electrical Steel)	-	0	-
9.1 b)(Amorphous core material)	-	0	-
9.1 c)(Copper/Aluminium conductor)	-	0	-
9.1 d)(Kraft paper)	-	0	-
9.1 e)(Press Board)	-	0	-
9.1 f)(Mineral oil)	-	0	-
10(Terminal arrangment )	-	0	-
15.2(Pressure and Vacuum Requirements)	-	0	-
15.4(Gasket)	-	0	-
19(Tolerances)	-	0	-
18(Efficiency and Regulation)	-	0	-
4(Service Conditions)	-	0	-
5(General )	-	0	-
6.1(Rating)	-	0	-
6.2(Rated frequency)	-	0	-
6.3(Nominal system voltage)	-	0	-
6.4(Basic Insulation level )	-	0	-
7(Technical Parameters of three phase distribution trasnformers higher than 200kva)	-	0	-
8(Technical Parameters of single phase distribution transformers UP to and including 25 KVA )	-	0	-
9(Standard Materials)	-	0	-
12(Connectors )	-	0	-
14(Mounting arrangement)	-	0	-
15(Trasnformer Tank )	-	0	-
16(Conservator for Non-Sealed type Transformers)	-	0	-
17(Ability of transformers to withstand external Short circuit )	-	0	-
19(Tolerances)	-	0	-
21(General )	-	0	-
22(Information required with enquiry and order )	-	0	-
11(Minimum clearance in Air)	-	0	-
6.8 (50%)(Total losses at 50 % load (Watts))	-	0	-
10(Terminal Arrangement)	-	0	-
6.5(No-Load Voltage Ratios)	-	0	-
6.6(Winding connections and phase displacement)	-	0	-
6.7(Tapping Range and Tapping Method)	-	0	-
6.8(Losses and impedance values)	-	0	-
6.9(Permissible Flux Density and Over Fluxing )	-	0	-
20(Fittings)	-	0	-
6.1(Limits of Temperature-rise)	-	0	-
18(Efficiency and regulation)	-	0	-
21.2 a)(Measurement of winding resistance )	-	-	-
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	-	-
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	-	-
21.2 d)(Measurement of no-load loss and current)	-	-	-
21.2 e)(Measurement of insulation resistance)	-	-	-
21.2 f)(Induced over-voltage withstand test)	-	-	-
21.2 g)( Separate-source voltage withstand test)	-	-	-
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	-	-
21.5.3.3(Oil leakage test)	-	-	-
21.3(a )(Lightning impulse test)	-	-	-
21.3(b)(Temperature-rise test)	-	-	-
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	-	-
21.4 a)( Determination of sound levels)	-	-	-
21.4 c(No load current at 112.5 percent voltage.)	-	-	-
21.4 e(BDV and moisture content of oil in the transformer)	-	-	-
13(Marking )	-	-	-
13.1(Marking (Rating Plates))	-	-	-
13.2(Terminal Marking Plate)	-	-	-
13.3(Marking )	-	-	-
13.4(Marking)	-	-	-
13.4.1(Marking)	-	-	-
14.1(MOUNTING ARRANGEMENT)	-	-	-
14.2(MOUNTING ARRANGEMENT)	-	-	-
14.3(MOUNTING ARRANGEMENT)	-	-	-
14.4(MOUNTING ARRANGEMENT)	-	-	-
15.1.1(TRANSFORMER TANK : Construction)	-	-	-
15.1.2(TRANSFORMER TANK : Construction)	-	-	-
15.1.3(TRANSFORMER TANK : Construction)	-	-	-
15.1.4(TRANSFORMER TANK : Construction)	-	-	-
15.1.5(TRANSFORMER TANK : Construction)	-	-	-
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	-	-
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	-	-
21.5.2.3( Oil leakage test (routine test))	-	-	-
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	-	-
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	-	-
21.5.3.3(Oil leakage test (routine test))	-	-	-
21.4 d(Paint adhesion tests)	-	-	-
15.5(Total Dry Film Paint Thickness)	-	-	-
6.9, 7.9, 8.9(Permissible Flux Density and Over Fluxing)	-	-	-
11(Minimum Clearnaces air )	-	-	-
16(Conservator for Non-sealed type Transformers)	-	-	-
20(Fittings)	-	-	-
6.8 (100%)(Total losses at 100 % load (Watts))	-	-	-
7.8 (50%)(Total losses at 50 % load (Watts))	-	-	-
8.8 (50%)(Total losses at 50 % load (Watts))	-	-	-
7.8 (100%)(Total losses at 100 % load (Watts))	-	-	-
8.8 (100%)(Total losses at 100 % load (Watts))	-	-	-
21.5.1.3(Oil leakage test upto 200 KVA)	-	-	-
9.1a)(CRGO Electrical Steel)	-	-	-
9.1 b)(Amorphous core material)	-	-	-
9.1 c)(Copper/Aluminium conductor)	-	-	-
9.1 d)(Kraft paper)	-	-	-
9.1 e)(Press Board)	-	-	-
9.1 f)(Mineral oil)	-	-	-
10(Terminal arrangment )	-	-	-
15.2(Pressure and Vacuum Requirements)	-	-	-
15.4(Gasket)	-	-	-
19(Tolerances)	-	-	-
18(Efficiency and Regulation)	-	-	-
4(Service Conditions)	-	-	-
5(General )	-	-	-
6.1(Rating)	-	-	-
6.2(Rated frequency)	-	-	-
6.3(Nominal system voltage)	-	-	-
6.4(Basic Insulation level )	-	-	-
7(Technical Parameters of three phase distribution trasnformers higher than 200kva)	-	-	-
8(Technical Parameters of single phase distribution transformers UP to and including 25 KVA )	-	-	-
9(Standard Materials)	-	-	-
12(Connectors )	-	-	-
14(Mounting arrangement)	-	-	-
15(Trasnformer Tank )	-	-	-
16(Conservator for Non-Sealed type Transformers)	-	-	-
17(Ability of transformers to withstand external Short circuit )	-	-	-
19(Tolerances)	-	-	-
21(General )	-	-	-
22(Information required with enquiry and order )	-	-	-
11(Minimum clearance in Air)	-	-	-
6.8 (50%)(Total losses at 50 % load (Watts))	-	-	-
10(Terminal Arrangement)	-	-	-
6.5(No-Load Voltage Ratios)	-	-	-
6.6(Winding connections and phase displacement)	-	-	-
6.7(Tapping Range and Tapping Method)	-	-	-
6.8(Losses and impedance values)	-	-	-
6.9(Permissible Flux Density and Over Fluxing )	-	-	-
20(Fittings)	-	-	-
6.1(Limits of Temperature-rise)	-	-	-
18(Efficiency and regulation)	-	-	-

02 Aug, 2026

-
Included w.e.f 14.07.2025 Exclusion: CL 17 ( ABILITY OF TRANSFORMERS TO WITHSTAND EXTERNAL SHORT CIRCUIT ) CL 21.3(c) (Short-circuit withstand test) CL 21.4 b (Short-circuit withstand test IS 2026 (Part 5) (above 200 kVA)), 21.4 e (BDV and moisture content of oil in the transformer), 17 (Ability of transformers to withstand external Short circuit )

2097

BIS, Southern Regional Laboratory (SRL)

None

IS 797 (2023)

COMMON SALT FOR CHEMICAL INDUSTRIES SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Description)	-
Cl-4.2 (Moisture Content)	-
Cl-4.3, Table-1 (i) (Sodium chloride (as NaCl), percent by mass, Min)	-
Cl-4.3, Table-1 (ii) (Matter insoluble in water, percent by mass, Max)	-
Cl-4.3, Table-1 (iii) (Calcium salts (as Ca), percent by mass, Max)	-
Cl-4.3, Table-1 (iv) (Magnesium salts (as Mg), percent by mass, Max)	-
Cl-4.3, Table-1 (v) (Sulphates (as SO4 ), percent by mass, Max)	-
Cl-4.3, Table-1 (vi) (Iron compound (as Fe), ppm, Max)	-
Cl-4.3.1 (Sulphate (as SO4))	-
Cl-4.3.1 (Iron)	-
Cl-4.3.1 (Alkalinity)	-
Cl-4.1 (Description)	-

-
-

2098

ATCC TEST LABS LLP

8172626

IS 17293 (2020)

Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c.

Electric Cables for Photovoltaic Systems for Rated Voltage 1500 V d.c.

1025000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	5000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	5000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	5000	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	75000	-
IS 191 : 2007, IS 440(Copper purity test)	-	6000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	10000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	5000	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	5000	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	75000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	8000	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	8000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	500000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	15000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	5000	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Annex - E of IS 17293 : 2020(UV resistance)	-	50000	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	15000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	500000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
11.2.2(Spark Test)	-	5000	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	5000	-
11.2.5(Surface Resistance of Sheath)	-	5000	-
11.3.1(Sheath Colour)	-	5000	-
11.3.2(Sheath Marking)	-	5000	-
11.3.3(Overall Diameters and Ovality)	-	5000	-
Annex J(Assessment of Halogens)	-	5000	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	5000	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	5000	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	5000	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	5000	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	5000	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	5000	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	5000	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	5000	-
5.2(Application to the Conductor)	-	5000	-
5.3(Thickness)	-	5000	-
6.2(Sheath application)	-	5000	-
6.3(Sheath Thickness)	-	5000	-
6.4(Sheath Colour)	-	5000	-
7(Overall Dimension)	-	5000	-
8.1(Continuity of Marking)	-	5000	-
8.2(Durability)	-	5000	-
8.3(Legibility)	-	5000	-
9(Core Identification)	-	5000	-
12(Packing and Marking)	-	5000	-
4.1(Resistance)	-	5000	-
7.1.2.1, 7.2.3(Annealing)	-	5000	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	5000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	5000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	5000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	5000	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	50000	-
IS 191 : 2007, IS 440(Copper purity test)	-	5000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	5000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	5000	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	500	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	500	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	5000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	5000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	5000	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Annex - E of IS 17293 : 2020(UV resistance)	-	50000	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	5000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
11.2.2(Spark Test)	-	5000	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	5000	-
11.2.5(Surface Resistance of Sheath)	-	5000	-
11.3.1(Sheath Colour)	-	5000	-
11.3.2(Sheath Marking)	-	5000	-
11.3.3(Overall Diameters and Ovality)	-	5000	-
Annex J(Assessment of Halogens)	-	5000	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	5000	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	5000	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	5000	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	5000	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	5000	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	5000	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	5000	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	50000	-
5.2(Application to the Conductor)	-	5000	-
5.3(Thickness)	-	5000	-
6.2(Sheath application)	-	5000	-
6.3(Sheath Thickness)	-	5000	-
6.4(Sheath Colour)	-	5000	-
7(Overall Dimension)	-	5000	-
8.1(Continuity of Marking)	-	5000	-
8.2(Durability)	-	5000	-
8.3(Legibility)	-	5000	-
9(Core Identification)	-	5000	-
12(Packing and Marking)	-	5000	-
4.1(Resistance)	-	500	-
7.1.2.1, 7.2.3(Annealing)	-	500	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	5000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	5000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	5000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	5000	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	5000	-
IS 191 : 2007, IS 440(Copper purity test)	-	5000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	5000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	5000	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	5000	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	5000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	500000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	5000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	5000	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Annex - E of IS 17293 : 2020(UV resistance)	-	5000	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5500	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	5000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
11.2.2(Spark Test)	-	5000	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	5000	-
11.2.5(Surface Resistance of Sheath)	-	5000	-
11.3.1(Sheath Colour)	-	5000	-
11.3.2(Sheath Marking)	-	500	-
11.3.3(Overall Diameters and Ovality)	-	5000	-
Annex J(Assessment of Halogens)	-	5000	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	5000	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	5000	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	5000	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	500000	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	5000	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	5000	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	5000	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	5000	-
5.2(Application to the Conductor)	-	5000	-
5.3(Thickness)	-	5000	-
6.2(Sheath application)	-	5000	-
6.3(Sheath Thickness)	-	5000	-
6.4(Sheath Colour)	-	5000	-
7(Overall Dimension)	-	5000	-
8.1(Continuity of Marking)	-	5000	-
8.2(Durability)	-	5000	-
8.3(Legibility)	-	5000	-
9(Core Identification)	-	5000	-
12(Packing and Marking)	-	5000	-
4.1(Resistance)	-	5000	-
7.1.2.1, 7.2.3(Annealing)	-	5000	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	5000	-

15 Jun, 2026

-
Included w.e.f.29.04.2025

2099

BIS, Central Laboratory (CL)

None

IS 4783 (2024)

Thiram powder for dry seed treatment - Specification (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description - IS 4783:2024)	-
3.2.2 (Colour - IS 4783:2024)	-
3.2.3 (Sieving Requirement 150 micron sieve - IS 4783:2024)	-
3.3.1. (Thiram Content - IS 4320:2024)	-
CL.3.3.1 (Thiram Content)	-

-
-

2100

FARE Labs Pvt. Ltd., Gurugram

8135716

IS 252 (2013)

Caustic soda - Specification (Fourth Revision)

All inclusive

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Form and Description)	-	400	-
Cl. 3.3 and 3.4(Table 1, S. no i)(Sodium carbonate (as Na2CO3), percent by mass)	-	400	-
Cl. 3.3 and 3.4(Table 1, S. no ii)(Sodium hydroxide (as NaOH), percent by mass)	-	400	-
Cl. 3.3 and 3.4(Table 1, S. no iii)(Chlorides (as Cl– ), percent by mass)	-	400	-
Cl. 3.3 and 3.4(Table 1, S. no iv)(Sulphates (as SO4), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no v)(Silicates (as SiO2), percent by mass)	-	500	-
Cl. 3.3 and 3.4(Table 1, S. no vi)(Iron (as Fe))	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no vii)(Copper)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no viii)(Manganese)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no ix)(Chlorates and per-chlorates)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no x)(Matter insoluble water, percent by mass)	-	400	-
Cl. 3.3 and 3.4(Table 1, S. no xi)(Total mercury)	-	600	-
Cl. 3.3 and 3.4(Table 1, S. no xii)(Sodium hydroxide)	-	600	-
5.2(Marking)	-	400	-

09 Mar, 2026

-
Included. w.e.f 15.04.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number