| 2251 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 2185 : Part 1 (2005) |
Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision) |
All |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.1(PHYSICAL REQUIREMENTS-General) |
- |
1000 |
|
General and Visual Inspection |
| 9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width) |
- |
1000 |
|
All Dimensions |
| 9.2 & 4.2.3(Nominal Dimensions-variation in the length of units ) |
- |
1000 |
|
All Dimensions |
| 9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units ) |
- |
1000 |
|
All Dimensions |
| 9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of
the face shell) |
- |
1000 |
|
All Dimensions |
| 9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of
the Web shell) |
- |
1000 |
|
All Dimensions |
| 9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C) |
- |
1000 |
|
Blocks Density |
| 9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit) |
- |
5000 |
|
Compressive Strength |
| 9.5(PHYSICAL REQUIREMENTS -Water Absorption) |
- |
3000 |
|
Water Absorption |
| 9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage) |
- |
7500 |
|
Drying Shrinkage |
| 9.7(PHYSICAL REQUIREMENTS -Moisture Movement) |
- |
3000 |
|
Moisture Movement |
| 15(Marking) |
- |
1000 |
|
Marking |
|
18 Dec, 2027 |
-
- |
| 2252 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 280 (2006) |
Mild steel wire for general engineering purposes (Fourth Revision) |
All |
8000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters) |
- |
500 |
|
Dimension |
| Cl 9(Tensile Test On UTM) |
- |
2000 |
|
Tensile |
| Cl 13(Workmanship) |
- |
500 |
|
Freedom from defects |
| Cl 11(Workmanship) |
- |
2000 |
|
Zinc Coating |
| 13(Freedom from defects) |
- |
500 |
|
Freedom from Defects |
| 7 & 8(Diameter) |
- |
500 |
|
Dimension |
| 7 & 8(Ovality) |
- |
500 |
|
Dimension |
| 9.2(Wrapping Test) |
- |
2000 |
|
Wrapping Test |
| 9.3(Bend test) |
- |
1500 |
|
Bend Test |
| Cl 11(Workmanship) |
- |
500 |
|
Workmanship (IS 7887 : 1992) |
|
18 Dec, 2027 |
-
- |
| 2253 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 3601 (2006) |
Steel tubes for mechanical and general engineering purposes - Specification (Second Revision) |
All |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Material) |
- |
1000 |
|
Sulphur & Phosphorous |
| 13(Mechanical Testing) |
- |
12000 |
|
Mechanical (Tensile, Bend, Flattening, Crushing, Drift Expansion) |
| 6.0(Workmanship) |
- |
500 |
|
Freedom from Defects |
| 4.1(Sulphur-Percentage by mass) |
- |
500 |
|
Sulphur |
| 4.1(Phosphorus-Percentage by mass) |
- |
500 |
|
Phosphorous |
| 8.0(Straightness) |
- |
500 |
|
Dimension |
| 19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia) |
- |
500 |
|
Dimension |
| 19.1.2, 24.1.2, 28.1.2, 33.1.2(Dimensions- Thickness) |
- |
500 |
|
Dimension |
| 11.2(Surface Protection) |
- |
1000 |
|
Uniformity of Coating |
| 13.1.3(Tensile Strength) |
- |
5000 |
|
Tensile |
| 13.1.1(Yield Stress) |
- |
5000 |
|
Tensile |
| 13.1.2(Elongation) |
- |
5000 |
|
Tensile |
| 13.2(Flattening Test) |
- |
2000 |
|
Flattening |
| 13.4(Bend Test (Whole Tube)) |
- |
2000 |
|
Bend |
| 13.5(Drift Expansion Test) |
- |
2000 |
|
Drift Expansion |
| 13.6(Crush Test) |
- |
2000 |
|
Crushing |
| 13.3(Bend Test (Strip)) |
- |
2000 |
|
Bend |
| 19.1.3(Height of Internal Fin) |
- |
500 |
|
Dimension |
| Cl. 10 Annex B Cl. 17, Cl. 19(Mass) |
- |
500 |
|
Mass |
| Cl. 9(Length) |
- |
500 |
|
Dimension |
| Cl. 10 Annex B Cl. 17, Cl. 19(Moment of inertia) |
- |
500 |
|
Dimension Geometric Properties |
| Cl. 10 Annex B Cl. 17, Cl. 19(Radius of gyration) |
- |
50 |
|
Dimension Geometric Properties |
| Cl. 10 Annex B Cl. 17, Cl. 19(Modulus of section) |
- |
500 |
|
Dimension Geometric Properties |
| Cl. 10 Annex B Cl. 17, Cl. 19(Area of cross section) |
- |
500 |
|
Dimension Geometric Properties |
|
18 Dec, 2027 |
-
- |
| 2254 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 15647 (2006) |
Hot rolled steel narrow width strip for welded tubes and pipes |
All |
11000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8(UTM) |
- |
3000 |
|
Tensile |
| Cl 9(Press) |
- |
1000 |
|
Bend |
| Cl 11(Workmanship) |
- |
500 |
|
Freedom From Defects |
| Cl 12(Length, Width & Thickness) |
- |
500 |
|
Dimesions |
| Cl 13(Workmanship) |
- |
500 |
|
Freedom from Defects |
| Cl. 12(Weight) |
- |
500 |
|
Weight |
| Cl. 12(Edge Camber) |
- |
500 |
|
Dimension |
| Cl. 12(Thickness) |
- |
500 |
|
Dimension |
| Cl. 8.2 Table 3(Elongation) |
- |
3000 |
|
Elonagtion |
| Cl. 8.2 Table 3(Yield Stress) |
- |
3000 |
|
Yield |
|
18 Dec, 2027 |
-
- |
| 2255 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 4457 (2007) |
Ceramic unglazed vitreous acid resisting tiles - Specification (Second Revision) |
All |
40000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 5, Table 1 - iv -a (Resistance to Chemicals - Annex F) |
- |
10000 |
|
Resistance to Chemicals |
| Cl. 5, Table 1 - iv -b (Resistance to conc. HNO3 and conc. H2SO4 - Annex G) |
- |
10000 |
|
Resistance to conc. HNO3 and conc. H2SO4 |
| 4.1(DIMENSIONS AND TOLERANCES- Size) |
- |
10000 |
|
All Dimensions |
| 4.2(DIMENSIONS AND TOLERANCES- Thickness) |
- |
10000 |
|
All Dimensions |
| 5-Table 1(i)-a(REQUIREMENTS-Dimensions and Surface Quality-Length) |
- |
11000 |
|
All Dimensions and Surface Quality |
| 5-Table 1(i)-a(REQUIREMENTS-Dimensions and Surface Quality-Width) |
- |
11000 |
|
All Dimensions and Surface Quality |
| 5-Table 1(i)-b(REQUIREMENTS-Dimensions and Surface Quality-Thickness) |
- |
11000 |
|
All Dimensions and Surface Quality |
| 5-Table 1(i)-c(REQUIREMENTS-Dimensions and Surface Quality-Straightness of sided) |
- |
11000 |
|
All Dimensions |
| 5-Table 1(i)-d(REQUIREMENTS-Dimensions and Surface Quality-Rectangularity) |
- |
10000 |
|
All Dimensions |
| 5-Table 1(i)-e(REQUIREMENTS-Dimensions and Surface Quality-Surface flatness-Centre curvature) |
- |
11000 |
|
All Dimensions and Surface Quality |
| 5-Table 1(i)-e(REQUIREMENTS-Dimensions and Surface Quality-Surface flatness-Edge curvature) |
- |
11000 |
|
All Dimensions and Surface Quality |
| 5-Table 1(i)-e(REQUIREMENTS-Dimensions and Surface Quality-Surface flatness-Warpage) |
- |
11000 |
|
All Dimensions and Surface Quality |
| 5-Table 1(ii)(REQUIREMENTS-Surface Quality) |
- |
1000 |
|
Surface Quality |
| 5-Table 1(iii)(REQUIREMENTS-Physical Properties-Water absorption by weigh(Average)) |
- |
10000 |
|
Water Absorption |
| 5-Table 1(iii)-a(REQUIREMENTS-Physical Properties-Water absorption by weigh(Indivisual)) |
- |
10000 |
|
Water Absorption |
| 5-Table 1(iii)-b-1(REQUIREMENTS-Physical Properties-Breaking strengrh(Thickness>=7.5mm)) |
- |
15000 |
|
Modulus of Rupture and Breaking Strength |
| 5-Table 1(iii)b-2(REQUIREMENTS-Physical Properties-Breaking strengrh(Thickness <7.5mm)) |
- |
15000 |
|
Modulus of Rupture and Breaking Strength |
| 5-Table 1(iii)-c(REQUIREMENTS-Physical Properties-Modulus of rupture(Average)) |
- |
15000 |
|
Modulus of Rupture and Breaking Strength |
| 5-Table 1(iii)-c(REQUIREMENTS-Physical Properties-Modulus of rupture(Individual)) |
- |
15000 |
|
Modulus of Rupture and Breaking Strength |
| 5-Table 1(iii)-d(REQUIREMENTS-Physical Properties-Abrusion resistance) |
- |
5000 |
|
Abrasion |
|
18 Dec, 2027 |
-
- |
| 2256 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 302 : Part 1 (2008) |
Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision) |
- |
52500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Marking and instructions) |
- |
1000 |
|
Testing charges parameter wise |
| 8.1.1(Protection against live parts in all positions) |
- |
1000 |
|
Testing charges parameter wise |
| 8.1.2(Protection against live parts in openings) |
- |
1000 |
|
Testing charges parameter wise |
| 8.1.3(Protection against live parts in visible glowing heating elements) |
- |
1000 |
|
Testing charges parameter wise |
| 8.1.4(Protection against live parts against protective impedance) |
- |
3000 |
|
Testing charges parameter wise |
| 10.1(Power input) |
- |
3000 |
|
Testing charges parameter wise |
| 10.2(Current input) |
- |
3000 |
|
Testing charges parameter wise |
| 11.1(General) |
- |
1000 |
|
Testing charges parameter wise |
| 11.2(General) |
- |
1000 |
|
Testing charges parameter wise |
| 11.3(Heating) |
- |
6000 |
|
Testing charges parameter wise |
| 13.1(General) |
- |
1000 |
|
Testing charges parameter wise |
| 13.2(Leakage current at operating temperature) |
- |
5000 |
|
Testing charges parameter wise |
| 13.3(Electric Strength at operating temperature) |
- |
6000 |
|
Testing charges parameter wise |
| 14(Transient Over Voltages) |
- |
8000 |
|
Testing charges parameter wise |
| 15.0(General) |
- |
1000 |
|
Testing charges parameter wise |
| 15.1(Ingress Protection test other than IPX0 (IP test)) |
- |
10000 |
|
Testing charges parameter wise |
| 15.2(Spillage Test) |
- |
3000 |
|
Testing charges parameter wise |
| 15.3(Humidity Test) |
- |
5000 |
|
Testing charges parameter wise |
| 16.0(General) |
- |
1000 |
|
Testing charges parameter wise |
| 16.1(General) |
- |
1000 |
|
Testing charges parameter wise |
| 16.2(Leakage Current (after Clause 15)) |
- |
5000 |
|
Testing charges parameter wise |
| 16.3(Electric Strength (after clause 15 and 16.2)) |
- |
6000 |
|
Testing charges parameter wise |
| 17(Over Load Protection of Transformers and associated circuits) |
- |
6000 |
|
Testing charges parameter wise |
| 18(Endurance Test requirements and tests) |
- |
1000 |
|
Testing charges parameter wise |
| 19(Abnormal Operation) |
- |
8000 |
|
Testing charges parameter wise |
| 20(Stability test) |
- |
2000 |
|
Testing charges parameter wise |
| 21(Mechanical Strength Test) |
- |
5000 |
|
Testing charges parameter wise |
| 22(Construction verification related test) |
- |
8000 |
|
Testing charges parameter wise |
| 23(General) |
- |
2500 |
|
Testing charges parameter wise |
| 24(Components) |
- |
2000 |
|
Testing charges parameter wise |
| 25(Supply connection and external flexible cords) |
- |
7000 |
|
Testing charges parameter wise |
| 26(Terminals for external conductors) |
- |
3000 |
|
Testing charges parameter wise |
| 27(Provision for earthing) |
- |
3000 |
|
Testing charges parameter wise |
| 28(Screw test and connections) |
- |
5000 |
|
Testing charges parameter wise |
| 29(clearance, creepage distances and solid insulation) |
- |
9000 |
|
Testing charges parameter wise |
| 30.1(Ball pressure test) |
- |
3000 |
|
Testing charges parameter wise |
| 30.2(Glow Wire Test) |
- |
3000 |
|
Testing charges parameter wise |
| 30.2(Needle Flame Test) |
- |
3000 |
|
Testing charges parameter wise |
| 31(Resistance to Rusting) |
- |
2000 |
|
Testing charges parameter wise |
| 32(Radiation Toxicity and Similar Hazards) |
- |
2000 |
|
Testing charges parameter wise |
|
18 Dec, 2027 |
-
Exclusion
24 (Components)
19 (Abnormal Operation) |
| 2257 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 6240 (2008) |
Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders (Fourth Revision) |
All |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7(UTM) |
- |
3000 |
|
Tensile |
| Cl 8(Press) |
- |
1000 |
|
Bend |
| Cl 9(Strainage Embrittlement) |
- |
5000 |
|
Strainage Embrrittlement |
| Cl 10(Erichsen Cupping) |
- |
3000 |
|
Cupping |
| Cl 13(Length, Width & Thickness) |
- |
1000 |
|
Dimension |
| 6.1(Carbon %) |
- |
500 |
|
Carbon |
| 6.1(Manganese %) |
- |
500 |
|
Manganese |
| 6.1(Phosphorus %) |
- |
500 |
|
Phosphorous |
| 6.1(Sulphur %) |
- |
500 |
|
Sulphur |
| 6.1(Silicon %) |
- |
500 |
|
Silicon |
| 6.1( Aluminium %) |
- |
500 |
|
Aluminium |
| 6.1(Nitrogen%) |
- |
1500 |
|
Nitrogen |
| Cl. 13(Out of square) |
- |
1000 |
|
Dimension |
| Cl. 13(Flatness) |
- |
1000 |
|
Dimension |
| Cl. 13(Camber) |
- |
1000 |
|
Dimension |
| Cl. 13(Width) |
- |
1000 |
|
Dimension |
| Cl. 13(Thickness) |
- |
1000 |
|
Dimension |
| Cl. 12(Freedom from defects) |
- |
1000 |
|
Freedom from Defect |
| Cl. 7.2 Table 3(Elongation) |
- |
3000 |
|
Elongation |
| Cl. 7.2 Table 3(Yield Stress) |
- |
3000 |
|
Elongation |
|
18 Dec, 2027 |
-
- |
| 2258 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 13488 (2008) |
Irrigation equipment - Emitting pipe systems - Specification (First Revision) |
NA |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant) |
- |
1500 |
|
OK |
| 5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density) |
- |
1000 |
|
OK |
| 5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989) |
- |
1500 |
|
OK |
| 5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989) |
- |
1000 |
|
OK |
| 5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963) |
- |
1500 |
|
OK |
| 8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes) |
- |
5000 |
|
OK |
| 8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes) |
- |
5000 |
|
OK |
| 8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure) |
- |
5000 |
|
OK |
| 8.2.1(Unregu/Qt~d Emining Pipe) |
- |
5000 |
|
OK |
| 8.2.2(Regulated Emitting Pipes) |
- |
5000 |
|
OK |
| 8.3.1(Wall Thickness ofEmitting Pipe) |
- |
1000 |
|
OK |
| 8.3.2(Inside Diameter ofEmitting Pipe) |
- |
1000 |
|
OK |
| 8.3.3(Flow Paths in Emitting Unit) |
- |
1000 |
|
OK |
| 8.3.4(Spacing ofEmitter Units) |
- |
1000 |
|
OK |
| 8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature) |
- |
5000 |
|
OK |
| 8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature) |
- |
5000 |
|
OK |
| 8.5(Resistance to Tension at Elevated Temperature) |
- |
5000 |
|
OK |
| 8.5(Resistance to Tension at Elevated Temperature) |
- |
5000 |
|
OK |
| 8.5(Resistance to Tension at Elevated Temperature) |
- |
5000 |
|
OK |
| 8.6(Resistance to Pull Out of Joints Between Fitting and Emitting
IS 13479) |
- |
2000 |
|
OK |
| 8.7.1(Resistance of PE Emitting Pipe to
Environmental Stress Cracking -Acceptance Test
Annex D of IS 12786) |
- |
5000 |
|
OK |
| 8.7.2(Resistance of PE Emitting Pipe to
Environmental Stress Cracking - Type Test
Annex D of IS 12786) |
- |
5000 |
|
OK |
| 8.8(Determination of Emitting Unit Exponent) |
- |
3000 |
|
OK |
|
18 Dec, 2027 |
-
- |
| 2259 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 15801 (2008) |
Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification |
NA |
150000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7(Dimensions Of Pipes) |
- |
3000 |
|
ok |
| Cl 8(Visual Appearance) |
- |
500 |
|
ok |
| Cl 9.1(Hydraulic Characteristics) |
- |
15000 |
|
ok |
| Cl 9.2(Fusion Compatibility) |
- |
2000 |
|
ok |
| Cl 9.3(Reversion Test ) |
- |
5000 |
|
ok |
| Cl 9.4 & Annex B(Impact Strength) |
- |
5000 |
|
ok |
| Cl 9.5(Density) |
- |
1000 |
|
ok |
| Cl 9.6(Melt Flow Rate) |
- |
2000 |
|
ok |
| Cl 9.7(Carbon Black Content & Dispersion) |
- |
2000 |
|
ok |
| Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing) |
- |
125000 |
|
ok |
| Cl 9.9(Opacity) |
- |
2000 |
|
ok |
|
18 Dec, 2027 |
-
- |
| 2260 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 278 (2009) |
Galvanized steel barbed wire for fencing - Specification (Fourth Revision) |
All |
4500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5 Table-1(Sizes Diameter of Line wire) |
- |
1000 |
|
NA |
| 5 Table-1(Sizes Diamater of Point wire) |
- |
1000 |
|
Dimension |
| 5 Table-1(Sizes Mass of Completed barbed wire) |
- |
1000 |
|
Mass |
| 5 Table-1(Sizes Distance between two barbs) |
- |
1000 |
|
Dimension |
| 5 Table-1(Sizes No. of Lays between the two consequtive barbs) |
- |
1000 |
|
Dimension |
| 9.1(Freedom from defects) |
- |
1000 |
|
Freedom from Defects |
| 12.1(Tensile Strength) |
- |
1500 |
|
Tensile Test |
| 12.1(Breaking load) |
- |
1500 |
|
Breaking Load |
| 12.3(Ductility) |
- |
1500 |
|
Wrapping |
| 12.2.1(Mass of zinc coating (line wire)) |
- |
1500 |
|
Mass of Zinc Coating |
| 12.2.2(Mass of zinc coating (point wire)) |
- |
1500 |
|
Uniformity of Zinc Coating |
| Cl. 7.1(General) |
- |
1000 |
|
General |
| Cl. 7.2(Finishing of Barbs) |
- |
1000 |
|
Finishing of Barbs |
| Cl. 7.2(Length of Barbs) |
- |
1000 |
|
Dimension |
| Cl. 7.2(Cut Angle) |
- |
1000 |
|
Dimension |
| 4(Type A/Type B) |
- |
1000 |
|
Type A/Type B |
|
18 Dec, 2027 |
-
- |
| 2261 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 3502 (2009) |
Steel chequered plates (Third Revision) |
All |
11010 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 5(Workmanship) |
- |
1000 |
|
NA |
| Cl 8(UTM) |
- |
7500 |
|
Tensile Test |
| Cl 9(Press) |
- |
1000 |
|
Bend Test |
| Cl 10(Length, Width, Thickness & Chequered Height) |
- |
1000 |
|
Dimenions |
| Cl. 11(Weight) |
- |
1000 |
|
Weight |
| Cl. 10(Thickness) |
- |
1000 |
|
Dimension |
| Cl. 10(Width) |
- |
1000 |
|
Dimension |
| Cl.8(Elongation) |
- |
7500 |
|
Elongation |
| Cl.8(Yield Stress) |
- |
7500 |
|
Yield Stress |
| Cl 10(Length, Width, Thickness & Chequered Height) |
- |
1000 |
|
Chequered Height |
|
18 Dec, 2027 |
-
- |
| 2262 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 13252 : Part 1 (2010) |
Information technology equipment - Safety: Part 1 general requirements (Second Revision) |
- |
60000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 1.5(Components) |
- |
1000 |
|
Testing charges parameter wise |
| 1.6(Power interface .) |
- |
1000 |
|
Testing charges parameter wise |
| 1.7(Markings and instructions) |
- |
1000 |
|
Testing charges parameter wise |
| 2.1(Protection from electric shock and energy hazards) |
- |
5000 |
|
Testing charges parameter wise |
| 2.2(SELV circuits) |
- |
3000 |
|
Testing charges parameter wise |
| 2.3(TNV circuits) |
- |
5000 |
|
Testing charges parameter wise |
| 2.4(Limited current circuits) |
- |
5000 |
|
Testing charges parameter wise |
| 2.5(Limited power sources .) |
- |
5000 |
|
Testing charges parameter wise |
| 2.6(Provisions for earthing and bonding) |
- |
3000 |
|
Testing charges parameter wise |
| 2.7(Overcurrent and earth fault protection in primary circuits) |
- |
2000 |
|
Testing charges parameter wise |
| 2.8(Safety interlocks) |
- |
2000 |
|
Testing charges parameter wise |
| 2.9(Electrical insulation) |
- |
5000 |
|
Testing charges parameter wise |
| 2.10(Clearances, creepage distances and distances through insulation) |
- |
10000 |
|
Testing charges parameter wise |
| 3.1(General) |
- |
2000 |
|
Testing charges parameter wise |
| 3.2(Connection to a mains supply) |
- |
6000 |
|
Testing charges parameter wise |
| 3.3(Wiring terminals for connection of external conductors) |
- |
3000 |
|
Testing charges parameter wise |
| 3.4(Disconnection from the mains supply) |
- |
1000 |
|
Testing charges parameter wise |
| 3.5(Interconnection of equipment) |
- |
1000 |
|
Testing charges parameter wise |
| 4.1(Stability) |
- |
2000 |
|
Testing charges parameter wise |
| 4.2(Mechanical strength) |
- |
5000 |
|
Testing charges parameter wise |
| 4.3(Design and construction) |
- |
3000 |
|
Testing charges parameter wise |
| 4.4(Protection against hazardous moving parts) |
- |
2000 |
|
Testing charges parameter wise |
| 4.5(Thermal requirements) |
- |
4000 |
|
Testing charges parameter wise |
| 4.6(Openings in enclosures) |
- |
3000 |
|
Testing charges parameter wise |
| 4.7(Resistance to fire) |
- |
5000 |
|
Testing charges parameter wise |
| 5.1(Touch current and protective conductor curren) |
- |
3000 |
|
Testing charges parameter wise |
| 5.2(Electric strength) |
- |
5000 |
|
Testing charges parameter wise |
| 5.3(Abnormal operating and fault conditions) |
- |
6000 |
|
Testing charges parameter wise |
| 6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment) |
- |
2000 |
|
Testing charges parameter wise |
| 6.2(Protection of equipment users from overvoltages on networks telecommunication) |
- |
5000 |
|
Testing charges parameter wise |
| 6.3(Protection of the telecommunication wiring system from overheating) |
- |
5000 |
|
Testing charges parameter wise |
| 7.1(General) |
- |
1000 |
|
Testing charges parameter wise |
| 7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment) |
- |
1000 |
|
Testing charges parameter wise |
| 7.3(Protection of equipment users from overvoltages on the cable distribution system) |
- |
5000 |
|
Testing charges parameter wise |
| 7.4(Insulation between primary circuits and cable distribution systems) |
- |
7000 |
|
Testing charges parameter wise |
|
18 Dec, 2027 |
-
- |
| 2263 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 15914 (2011) |
High tensile strength flat rolled steel plate (Up To 6 Mm), sheet and strip for the manufacture of welded gas cylinder - Specification |
All |
12750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7(UTM) |
- |
10000 |
|
NA |
| Cl 9(Workmanship) |
- |
1000 |
|
Freedom from Defects |
| Cl 10(Length, Width & Thickness) |
- |
1000 |
|
Dimensions |
| 6.0(MICRO ALLOYING) |
- |
500 |
|
Micro Alloying |
| 6.0(ALUMINIUM) |
- |
100 |
|
Aluminium |
| 6.0(SILICON) |
- |
500 |
|
Silicon |
| 6.0(MANGANESE) |
- |
500 |
|
Manganese |
| 6.0(PHOSPHORUS) |
- |
500 |
|
Phosphorous |
| 6.0(SULPHUR) |
- |
500 |
|
Sulphur |
| 6.0(CARBON) |
- |
500 |
|
Carbon |
| 6.0(NITROGEN) |
- |
2000 |
|
Nitrogen |
| Cl. 10(Mass) |
- |
1000 |
|
Weight |
| Cl. 10(Out of square) |
- |
1000 |
|
Dimension |
| Cl. 10(Flatness) |
- |
1000 |
|
Dimension |
| Cl. 10(Camber) |
- |
1000 |
|
Dimension |
| Cl. 10(Width) |
- |
1000 |
|
Dimension |
| Cl. 10(Thickness) |
- |
1000 |
|
Dimension |
| Cl. 7 Table 3(Elongation) |
- |
10000 |
|
Elongation |
| Cl. 7 Table 3(Yield Stress) |
- |
10000 |
|
Yield |
|
18 Dec, 2027 |
-
- |
| 2264 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 299 (2012) |
Alumino - Ferric - Specification (Fifth Revision) |
- |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 1 (i) Table 1( Insouble matter, Grade 4, A-3) |
- |
1500 |
|
- |
| 1 (ii) Table 1(Soluble iron compound (as Fe2+ and Fe3+), Grade 4, A-4) |
- |
1500 |
|
- |
| 1 (iii) Table 1(Water soluble aluminium compounds (as Al2O3), Grade 4, A-5) |
- |
1500 |
|
- |
| 1 (iv) Table 1(pH (of 5 percent aqueous solution), Grade 4, A-6) |
- |
1000 |
|
- |
| 1 (v) Table 1(Free acidity (as H2SO4)/Basicity (as Al2O3), Grade 4, A-7) |
- |
1500 |
|
- |
| 1 (vi) Table 1( Lead (as Pb), Grade 4, A-8) |
- |
1500 |
|
- |
| 1 (vii) Table 1(Arsenic (as As2O3), Grade 4, A-9) |
- |
1500 |
|
- |
| 1 (viii) Table 1(Mercury (as Hg), Grade 4, A-10) |
- |
1500 |
|
- |
| 1 (ix) Table 1(Manganese (as Mn), Grade 4, A-11) |
- |
1500 |
|
- |
| 1 (x) Table 1(Chromium (as Cr), Grade 1, A-12) |
- |
1500 |
|
- |
| 1 (xi) Table 1(Cadmium (as Cd), Grade 4, A-13) |
- |
1500 |
|
- |
| 1 (xii) Table 1(Selenium (as Se), Grade 4, A-14) |
- |
1500 |
|
- |
| 1 (xiii) (a) Table 1(Organic impurities:Phenolic compounds (as C6H5OH), Garde 4, A-15) |
- |
1500 |
|
- |
| 1 (xiii) (b) Table 1(Anionic detergents (as MASS), Garde 1, A-16) |
- |
1500 |
|
- |
|
18 Dec, 2027 |
-
- |
| 2265 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 1237 (2012) |
Cement Concrete Flooring Tiles - Specification |
All |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer) |
- |
750 |
|
All Dimension |
| Cl 12.2(Concavity & Convexity ) |
- |
750 |
|
All Dimension |
| Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.) |
- |
750 |
|
All Dimension |
| Cl 12.4(Shall not exceed 1 percent of the length of the edge.) |
- |
750 |
|
All Dimension |
| Cl 12.5(Water absorption) |
- |
1000 |
|
Water absorption |
| Cl 12.6(Wet transverse strength ) |
- |
2000 |
|
Wet transverse strength |
| Cl 12.7(Resistance to wear) |
- |
5000 |
|
Resistance to wear |
| Cl 11(Suface Finish) |
- |
500 |
|
Surface Finish |
| Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer) |
- |
750 |
|
All Dimension |
|
18 Dec, 2027 |
-
- |
| 2266 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 2830 (2012) |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision) |
All |
8600 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 9(Workmanship) |
- |
500 |
|
NA |
| Cl 10.1(Workmanship) |
- |
500 |
|
Macro Examination |
| Cl 10.2(Workmanship) |
- |
500 |
|
Bend |
| Cl 10.3(Workmanship) |
- |
500 |
|
Camber |
| Cl 11(Length, Width & Thickness) |
- |
500 |
|
Dimension |
| 6.1(Carbon %) |
- |
500 |
|
Carbon |
| 6.1(Manganese %) |
- |
500 |
|
Manganese |
| 6.1(Phosphorus %) |
- |
500 |
|
Phosphorous |
| 6.1(Sulphur %) |
- |
500 |
|
Sulphur |
| 6.1(Silicon %) |
- |
500 |
|
Silicon |
| 6.1( Nitrogen%) |
- |
500 |
|
Nitrogen |
| 6.1( Copper %) |
- |
100 |
|
Copper |
| 6.1( Aluminium %) |
- |
100 |
|
Aluminium |
| 6.1( Nb) |
- |
100 |
|
Niobium |
| 6.1(V) |
- |
100 |
|
Vanadium |
| 6.1( Ti) |
- |
100 |
|
Titanium |
| 6.1(Cr) |
- |
100 |
|
Chromium |
| 6.1(Mo) |
- |
100 |
|
Moybdenum |
| 6.1(Ni) |
- |
100 |
|
Nickle |
| 10.1 (a)(Macro-examination) |
- |
500 |
|
Macro Examination |
| Cl. 10.2(Bend) |
- |
500 |
|
Dimension |
| Cl. 10.3(Camber) |
- |
500 |
|
Dimension |
| 11(Width) |
- |
500 |
|
Dimension |
| 11(Thickness) |
- |
500 |
|
Dimension |
| Cl. 10.1 (b)(Sulphur Print) |
- |
8000 |
|
Sulphur Print |
| Cl. 11.2(Out of Squareness) |
- |
500 |
|
Dimension |
|
18 Dec, 2027 |
-
- |
| 2267 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 2831 (2012) |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision) |
All |
10325 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9( FREEDOM FROM DEFECTS) |
- |
500 |
|
NA |
| 10.1.a)( Macro examination IS 11371) |
- |
500 |
|
Macro Examination |
| 10.1.b)( Sulphur print tests IS 12037) |
- |
8000 |
|
Sulphur Print |
| 11 & 12(DIMENSIONS and Tolerances) |
- |
500 |
|
Dimension |
| Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
Carbon |
| Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
Manganese |
| Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
Sulphur |
| Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
Phosphorous |
| Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
Silicon |
| Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
100 |
|
Aluminium |
| Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
1500 |
|
Nitrogen |
| Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
100 |
|
Copper |
| Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
100 |
|
Niobium |
| Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
100 |
|
Vanadium |
| Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
100 |
|
Titanium |
|
18 Dec, 2027 |
-
- |
| 2268 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 10322 : Part 5 : Sec 1 (2012) |
Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision) |
- |
21800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(General Test Requireements) |
- |
1000 |
|
Testing Charges As per parameter |
| 5(Classification of Luminaires') |
- |
1000 |
|
Testing Charges As per parameter |
| 6.0(Marking) |
- |
3000 |
|
Testing Charges As per parameter |
| 7.0(Construction) |
- |
10000 |
|
Testing Charges As per parameter |
| 8.0(Creepage Distance and Clearances) |
- |
6000 |
|
Testing Charges As per parameter |
| 9.0(Provision for earthing) |
- |
5000 |
|
Testing Charges As per parameter |
| 10.0(Terminals) |
- |
9000 |
|
Testing Charges As per parameter |
| 11.0(External & Internal Wiring) |
- |
6000 |
|
Testing Charges As per parameter |
| 12.0(Protection against electric shock) |
- |
5000 |
|
Testing Charges As per parameter |
| 13.0(Endurance Tests and Thermal Tests) |
- |
14000 |
|
Testing Charges As per parameter |
| 14.0(Resistance to Dust & Moisture) |
- |
15000 |
|
Testing Charges As per parameter |
| 15.0(Insulation Resistance and Electric Strength) |
- |
10000 |
|
Testing Charges As per parameter |
| 16.0(Resistance to Heat , fire and tracking) |
- |
12000 |
|
Testing Charges As per parameter |
|
18 Dec, 2027 |
-
- |
| 2269 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 15885 : Part 2 : Sec 13 (2012) |
Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules |
- |
50000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Marking) |
- |
1000 |
|
- |
| 8(Protection against accidental contact with live parts) |
- |
5000 |
|
- |
| 9(Terminals) |
- |
8000 |
|
- |
| 10(PROVISION FOR EARTHING) |
- |
3000 |
|
- |
| 11(MOISTURE RESISTANCE) |
- |
9000 |
|
- |
| 12(Electric Strength) |
- |
5000 |
|
- |
| 13(Thermal endurance test for winding of ballasts) |
- |
1000 |
|
- |
| 14(Fault conditions) |
- |
8000 |
|
- |
| 15(Transformer heating) |
- |
9000 |
|
- |
| 16(Construction) |
- |
6000 |
|
- |
| 17(Creepage distance and clearances) |
- |
5000 |
|
- |
| 18(Screws, current carrying parts and connections) |
- |
5000 |
|
- |
| 19(Resistance to heat, fire and tracking) |
- |
10000 |
|
- |
| 20(Resistance to corrosion) |
- |
5000 |
|
- |
|
18 Dec, 2027 |
-
- |
| 2270 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 15961 (2012) |
Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain) |
All |
7485 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8(UTM) |
- |
5000 |
|
NA |
| Cl 9 & Table 2(Workmanship) |
- |
2000 |
|
Mass of Zinc Coating |
| Cl 10(Coating Adhesion ) |
- |
2000 |
|
Coating Adhesion |
| Cl 11(Workmanship) |
- |
500 |
|
Freedom From Defects |
| Cl 12(Weight) |
- |
500 |
|
Weight |
| Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness) |
- |
1000 |
|
Dimension |
|
18 Dec, 2027 |
-
- |
| 2271 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 15962 (2012) |
Structural steels for buildings and structures with improved seismic resistance |
All |
40000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 6(Freedom from Defects) |
- |
2000 |
|
Freedom from Defects |
| Cl 10(Tensile Test) |
- |
25000 |
|
Tensile Test |
| Cl 11(Impact Test) |
- |
7500 |
|
Impact Test |
| Cl 13(Dimensions) |
- |
2000 |
|
Dimensions |
| Cl 16(Mass) |
- |
500 |
|
Mass |
| Clauses 7, 8.1 & .2, Table- 1(E250S, C) |
- |
100 |
|
Carbon |
| Clauses 7, 8.1 & .2, Table- 1(E250S, Mn ) |
- |
100 |
|
Manganese |
| Clauses 7, 8.1 & .2, Table- 1(E250S, P) |
- |
100 |
|
Phosphorous |
| Clauses 7, 8.1 & .2, Table- 1(E250S, S) |
- |
100 |
|
Sulphur |
| Clauses 7, 8.1 & .2, Table- 1(E250S, Si) |
- |
100 |
|
Silicon |
| Clauses 7, 8.1 & .2, Table- 1(E250S, CE) |
- |
500 |
|
Carbon Equivalent |
| Clauses 7, 8.1 & .2, Table- 1(E300S, C) |
- |
100 |
|
Carbon |
| Clauses 7, 8.1 & .2, Table- 1(E300S, Mn) |
- |
100 |
|
Manganese |
| Clauses 7, 8.1 & .2, Table- 1(E300S, P) |
- |
100 |
|
Phosphorous |
| Clauses 7, 8.1 & .2, Table- 1(E300S, S) |
- |
100 |
|
Sulphur |
| Clauses 7, 8.1 & .2, Table- 1(E300S, Si) |
- |
100 |
|
Silicon |
| Clauses 7, 8.1 & .2, Table- 1(E300S, CE) |
- |
500 |
|
Carbon Equivalent |
| Clauses 7, 8.1 & .2, Table- 1(E350S, C) |
- |
100 |
|
Carbon |
| Clauses 7, 8.1 & .2, Table- 1(E350S, Mn) |
- |
100 |
|
Manganese |
| Clauses 7, 8.1 & .2, Table- 1(E350S, P) |
- |
100 |
|
Phosphorous |
| Clauses 7, 8.1 & .2, Table- 1(E350S, S) |
- |
100 |
|
Sulphur |
| Clauses 7, 8.1 & .2, Table- 1(E350S, Si) |
- |
100 |
|
Silicon |
| Clauses 7, 8.1 & .2, Table- 1(E450S, C) |
- |
100 |
|
Carbon |
| Clauses 7, 8.1 & .2, Table- 1(E450S, Mn) |
- |
100 |
|
Manganese |
| Clauses 7, 8.1 & .2, Table- 1(E450S, P) |
- |
100 |
|
Phosphorous |
| Clauses 7, 8.1 & .2, Table- 1(E450S, S) |
- |
100 |
|
Sulphur |
| Clauses 7, 8.1 & .2, Table- 1(E450S, Si) |
- |
100 |
|
Silicon |
| Clauses 7, 8.1 & .2, Table- 1(E450S, CE) |
- |
500 |
|
Carbon Equivalent |
| Clauses 7, 8.1 & .2, Table- 1(E350S, CE) |
- |
500 |
|
Carbon Equivalent |
|
18 Dec, 2027 |
-
- |
| 2272 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 15997 (2012) |
Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification |
All |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
Carbon |
| Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
Silicon |
| Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
Manganese |
| Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
1500 |
|
Nickle |
| Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
750 |
|
Chromium |
| Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
Suphur |
| Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
Phosphorous |
| Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
750 |
|
Copper |
| Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
1500 |
|
Nitrogen |
| 6(Freedom From Defects) |
- |
500 |
|
Freedom from Defects |
| 9.3(Tensile Test-1608:Part 1) |
- |
10000 |
|
Tensile Test |
| 9.3, Table 3 (Yield Strength, Mpa) |
- |
10000 |
|
Tensile |
| 9.3, Table 3 (Elongation, %) |
- |
10000 |
|
Tensile |
| 9.4(Erichsen Cupping Test,(Average depth of cupping) mm) |
- |
2000 |
|
Cupping |
| 12(Dimensions) |
- |
1000 |
|
Dimensions |
| 14.1(Thickness,mm) |
- |
1000 |
|
Dimensions |
| 14.2( Width, mm) |
- |
1000 |
|
Dimensions |
| 14.3(Length, mm) |
- |
1000 |
|
Dimensions |
| 14.4(Flatness, mm) |
- |
1000 |
|
Dimensions |
| 14.5(Camber, mm) |
- |
1000 |
|
Dimensions |
|
18 Dec, 2027 |
-
- |
| 2273 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 16102 : Part 1 (2012) |
Self - Ballasted led lamps for general lighting services: Part 1 safety requirements |
- |
48000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Marking) |
- |
1000 |
|
- |
| 6(Interchangeability) |
- |
5000 |
|
- |
| 7(Protection against accidental contact with live parts) |
- |
5000 |
|
- |
| 8(Insulation Resistance and Electric Strength) |
- |
10000 |
|
- |
| 9(MECHANICAL STRENGTH) |
- |
5000 |
|
- |
| 10(cap temperature) |
- |
5000 |
|
- |
| 11(Resistance to Heat) |
- |
5000 |
|
- |
| 12(Resistance to Flame and Ignition) |
- |
4000 |
|
- |
| 13(Fault conditions) |
- |
9000 |
|
- |
| 14(Creepage distance and clearances) |
- |
5000 |
|
- |
|
18 Dec, 2027 |
-
- |
| 2274 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 3812 (Part 1) (2013) |
Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete |
- |
17250 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness) |
- |
2000 |
|
NA |
| 7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve) |
- |
2000 |
|
PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve |
| 7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength) |
- |
7500 |
|
PHYSICAL REQUIREMENTS-Average compressive strength |
| 7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days) |
- |
7500 |
|
PHYSICAL REQUIREMENTS- all Compressive strength at 28 days |
| 7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test ) |
- |
3000 |
|
PHYSICAL REQUIREMENTS-Soundness by autoclave test |
| Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727) |
- |
5000 |
|
Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727 |
| Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727) |
- |
1500 |
|
Silicon dioxide (SiO2) - IS 1727 |
| Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B) |
- |
1500 |
|
Reactive Silica - Annex B |
| Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727) |
- |
1500 |
|
Magnesium oxide (MgO) - IS 1727 |
| Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727) |
- |
1500 |
|
Total sulphur as sulphur trioxide (SO3) - IS 1727 |
| Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C) |
- |
5000 |
|
Available alkalis as equivalent sodium oxide (Na2O) - Annex C |
| Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032) |
- |
3000 |
|
Total Chlorides - IS 4032 |
| Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727) |
- |
3000 |
|
Loss on ignition |
| Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D) |
- |
2000 |
|
Moisture content of the fly ash when supplied in dry condition |
| 5.1, 7.1, table-2, iii(Lime reacitivity) |
- |
10000 |
|
Testing Charges As per Parameter |
|
18 Dec, 2027 |
-
- |
| 2275 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 3812 : Part 2 (2013) |
Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete |
- |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1, Table 1(Fineness — Specific surface in m2 /kg) |
- |
2000 |
|
Fineness — Specific surface |
| 7.1, Table 1(Particles retained on 45 micron IS sieve (wet sieving)) |
- |
2000 |
|
Particles retained on 45 micron IS sieve (wet sieving) |
| 7.1, Table 1(Soundnes) |
- |
2000 |
|
Soundness |
| 5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 )) |
- |
5000 |
|
Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 ) |
| 5.1, 6.1, Table 1(Silicon dioxide (SiO2 )) |
- |
1500 |
|
Silicon dioxide (SiO2 ) |
| 5.1, 6.1, Table 1(Magnesium oxide (MgO) |
- |
1500 |
|
Magnesium oxide |
| 5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3) |
- |
1500 |
|
Total sulphur as sulphur trioxide |
| 5.1, 6.1, Table 1(Available alkalies as equivalent sodium oxide (Na2O)) |
- |
1500 |
|
Available alkalies as equivalent sodium oxide |
| 5.1, 6.1, Table 1(Total chlorides) |
- |
5000 |
|
Total chlorides |
| 5.1, 6.1, Table 1(Loss on ignition) |
- |
3000 |
|
Loss on ignition |
| 6.2(moisture content) |
- |
2000 |
|
moisture content |
| Clauses 5.1 & 7.1 Table No. 2, SI No. (i)
(Fineness- Specific surface by blaine's method) |
- |
2000 |
|
- |
| Clauses 5.1 & 7.1 Table No. 2, SI No. (ii)
(Particles retained on 45 micron IS Sieve (we sieving)) |
- |
2000 |
|
- |
| Clauses 5.1 & 7.1 Table No. 2, SI No. (iii)
(Soundness by autoclave test - Expansion of specimen) |
- |
2000 |
|
- |
|
18 Dec, 2027 |
-
- |
| 2276 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 13592 (2013) |
Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System |
- |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.5(Surface colour of the pipes shall be dark shade of grey) |
- |
500 |
|
ok |
| Cl6.3(The composition shall be based on PVC resin
having a K-value of 64 or greater when tested in
accordance with IS 4669) |
- |
2000 |
|
ok |
| Cl.7.1(Mean outside diameter, outside diameter at any point
for Type A and Type B pipes
manufactured plain or with socket shall be as given in
Table 1. Dimensions shall be measured according to
the method given in IS 12235 (Part 1).) |
- |
1000 |
|
ok |
| Cl.7.1( outside diameter at any point
for Type A and Type B pipes
manufactured plain or with socket shall be as given in
Table 1. Dimensions shall be measured according to
the method given in IS 12235 (Part 1).) |
- |
1000 |
|
ok |
| Cl.7.1( wall thickness at any point
for Type A and Type B pipes
manufactured plain or with socket shall be as given in
Table 1. Dimensions shall be measured according to
the method given in IS 12235 (Part 1).) |
- |
1000 |
|
ok |
| Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or
6 metres either plain or with socket for solvent
cementing/grooved socket. Tolerances on specified
length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent
cementing/grooved socket shall be as given in Fig. 1.) |
- |
1000 |
|
ok |
| Cl.7.3.1(Minimum wall thickness of socket on pipes shall
be as given in Table 2 read with Fig. 2 and Fig. 3.) |
- |
1000 |
|
ok |
| Cl.7.3.2(Dimensions of sockets for solvent cementing and
grooved sockets of pipes shall be as given in Tables 3
and 4 respectively, read with Fig. 2 and 3.) |
- |
1000 |
|
ok |
| Cl.8.1(The internal and external surface of the pipes shall be
smooth and clean, and free from grooving and other
defects. The end shall be clearly cut and shall be square
with the axis of the pipe. The end may be chamfered
on the plain side.) |
- |
500 |
|
ok |
| Cl.8.2(When tested by the method described in IS 12235
(Part 5), a length of pipe sample of 200 ± 20 mm shall
not alter in length by more than 5 percent. In the case
of socket ended pipes, this test shall be carried out on
the plain portion of pipe taken at least 100 mm away
from the root of the socket.) |
- |
2000 |
|
ok |
| Cl8.3(This test shall be carried out for socket end pipes only.
When tested by the method described in IS 12235
(Part 6), the test specimens shall not show blisters,
excessive delamination or cracking or signs of weld
line splitting.) |
- |
5000 |
|
ok |
| Cl.8.4(When determined in accordance with IS 12235 (Part 2),
the vicat softening temperature of the specimen shall
not be less than 79°C.) |
- |
2000 |
|
ok |
| Cl.8.5(After the required
period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show
difference of more than 20 percent of their initial tensile
strengths) |
- |
7500 |
|
ok |
| Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid) |
- |
5000 |
|
ok |
| Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than
10 percent. Mass of striker and height of fall shall be
as per Annex A.) |
- |
1000 |
|
ok |
| Cl.10.2(When determined in accordance with the method
described in IS 12235 (Part 13), the tensile strength at
break shall not be less than 45 MPa.) |
- |
2000 |
|
ok |
| Cl.10.3(The axial shrinkage shall not exceed 2 percent when
determined in accordance with Annex B.) |
- |
5000 |
|
ok |
| Cl.11.(Jointing of solvent
cementing joints is to be carried out using solvent
conforming to IS 14182.
Apply a pressure of 0.05 MPa for a period of 15 min
and there should be no leakage at any joint.) |
- |
2000 |
|
ok |
| Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane) |
- |
5000 |
|
ok |
| 8.6(Effect on Water Test) |
- |
5000 |
|
OK |
|
18 Dec, 2027 |
-
- |
| 2277 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 13801 (2013) |
Chequered Cement Concrete Tiles - |
All |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| (Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.) |
- |
1000 |
|
All Dimensions |
| Cl 12.1(Concavity & Convexity ) |
- |
500 |
|
Surface Flatness and Finish |
| Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.) |
- |
1000 |
|
All Dimensions |
| Cl 12.3(Shall not exceed 1 percent of the length of the edge.) |
- |
1000 |
|
All Dimensions |
| Cl 12.4(Water absorption) |
- |
1000 |
|
Water absorption |
| Cl 12.5(Wet transverse strength) |
- |
5000 |
|
Wet transverse strength |
| Cl 12.6(Resistance to wear) |
- |
5000 |
|
Resistance to wear |
| Cl 11(Finish) |
- |
500 |
|
Surface Flatness and Finish |
| Cl 11(Finish) |
- |
500 |
|
Surface Flatness and Finish |
|
18 Dec, 2027 |
-
- |
| 2278 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 302 : Part 2 : Sec 26 (2014) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision) |
- |
30000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0(Classification) |
- |
1000 |
|
Testing Charges As per Parameter |
| 7(Marking and instructions) |
- |
1000 |
|
Testing Charges As per Parameter |
| 8(Protection against live parts) |
- |
3000 |
|
Testing Charges As per Parameter |
| 9(STARTING OF MOTOR-OPERATED APPLIANCES) |
- |
1000 |
|
Testing Charges As per Parameter |
| 10(POWER INPUT AND CURRENT) |
- |
7000 |
|
Testing Charges As per Parameter |
| 11(HEATING) |
- |
8000 |
|
Testing Charges As per Parameter |
| 13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE) |
- |
8000 |
|
Testing Charges As per Parameter |
| 14(TRANSIENT OVERVOLTAGES) |
- |
7000 |
|
Testing Charges As per Parameter |
| 15(MOISTURE RESISTANCE) |
- |
10000 |
|
Testing Charges As per Parameter |
| 16(LEAKAGE CURRENT AND ELECTRIC STRENGTH) |
- |
8000 |
|
Testing Charges As per Parameter |
| 17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS) |
- |
7000 |
|
Testing Charges As per Parameter |
| 18(ENDURANCE) |
- |
1000 |
|
Testing Charges As per Parameter |
| 19(ABNORMAL OPERATION) |
- |
9000 |
|
Testing Charges As per Parameter |
| 20(STABILITY AND MECHANICAL HAZARDS) |
- |
2000 |
|
Testing Charges As per Parameter |
| 21(MECHANICAL STRENGTH) |
- |
8000 |
|
Testing Charges As per Parameter |
| 22(CONSTRUCTION) |
- |
5000 |
|
Testing Charges As per Parameter |
| 23(INTERNAL WIRING) |
- |
4000 |
|
Testing Charges As per Parameter |
| 24(COMPONENTS) |
- |
2000 |
|
Testing Charges As per Parameter |
| 25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS) |
- |
7000 |
|
Testing Charges As per Parameter |
| 26(TERMINALS FOR EXTERNAL CONDUCTORS) |
- |
5000 |
|
Testing Charges As per Parameter |
| 27(PROVISION FOR EARTHING) |
- |
3000 |
|
Testing Charges As per Parameter |
| 28(SCREWS AND CONNECTIONS) |
- |
6000 |
|
Testing Charges As per Parameter |
| 29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION) |
- |
8000 |
|
Testing Charges As per Parameter |
| 30(RESISTANCE TO HEAT AND FIRE) |
- |
12000 |
|
Testing Charges As per Parameter |
| 31(RESISTANCE TO RUSTING) |
- |
2000 |
|
Testing Charges As per Parameter |
| 32(RADIATION, TOXICITY AND SIMILAR HAZARDS) |
- |
2000 |
|
Testing Charges As per Parameter |
| 15.4 (b)(Cold impact) |
- |
7000 |
|
Testing Charges As per Parameter |
|
18 Dec, 2027 |
-
- |
| 2279 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 1161 (2014) |
Steel tubes for structural purposes - Specification (Fifth Revision) |
All |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 6(Outer Diameter, Thickness & Mass) |
- |
500 |
|
Dimensions |
| Cl 7(Workmanship) |
- |
500 |
|
Workmanship |
| Cl 9(Workmanship) |
- |
500 |
|
Dimesions |
| Cl 11(Tensile Test, Flattening Test & Cold Bend Test) |
- |
5000 |
|
Tensile Test |
| Cl 13(Workmanship) |
- |
500 |
|
Workmanship |
| 5 AND AS PER IS 10748(MICRO ALLOY) |
- |
500 |
|
Micro Alloy |
| 8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING) |
- |
2000 |
|
Uniformity of Zinc Coating |
| 8 AND AS PER IS 4736(MASS OF ZINC COATING) |
- |
1500 |
|
Mass of Zinc Coating |
| 5 AND AS PER IS 10748(COPPER) |
- |
500 |
|
Copper |
| 5 AND AS PER IS 10748(CARBON EQUIVALENT) |
- |
500 |
|
Carbon Equivalent |
| 5 AND AS PER IS 10748(CARBON) |
- |
500 |
|
Carbon |
| Clause - 5.1, Table-3( ALUMINIUM) |
- |
500 |
|
Aluminium |
| Clause - 5.1, Table-3(SILICON) |
- |
500 |
|
Silicon |
| Clause - 5.1, Table-3(NITROGEN) |
- |
1500 |
|
Nitrogen |
| Clause - 5.1, Table-3(MANGANESE) |
- |
500 |
|
Manganese |
| Clause - 5.1, Table-3(PHOSPHURS) |
- |
500 |
|
Phosphorous |
| Clause - 5.1, Table-3(SULPHUR) |
- |
500 |
|
Sulphur |
| 9(Straightness) |
- |
500 |
|
Straightness |
| Cl. 6 , 6.2 Table 1(Thickness) |
- |
500 |
|
Thickness |
| Cl. 6 , 6.2 Table 1(Weight) |
- |
500 |
|
Weight |
| Cl. 6 , 6.2 Table 1(Area of cross section) |
- |
500 |
|
Dimension |
| Cl. 6 , 6.2 Table 1(Internal volume) |
- |
500 |
|
Dimension |
| Cl. 6 , 6.2 Table 1(Surface external) |
- |
500 |
|
Dimension |
| Cl. 6 , 6.2 Table 1(Surface internal) |
- |
500 |
|
Dimension |
| Cl. 6 , 6.2 Table 1(Moment of inertia) |
- |
500 |
|
Dimension |
| Cl. 6 , 6.2 Table 1(Modulus of section) |
- |
500 |
|
Dimension |
| Cl. 6 , 6.2 Table 1(Radius of gyration) |
- |
500 |
|
Dimension |
| Cl. 6 , 6.2 Table 1(Square of radius of gyyration) |
- |
500 |
|
Dimension |
| Cl. 11.2 Table 2(Yield strength) |
- |
5000 |
|
Yield Strength |
| Cl. 11.2 Table 2(Elongation) |
- |
5000 |
|
Elongation |
| Cl 11.3.1(Cold bend test (upto & including 50 mm NB)) |
- |
2000 |
|
Cold Bend Test |
| Cl 11.3.1(Flattening test (over 50 mm NB)) |
- |
2000 |
|
Flattening |
|
18 Dec, 2027 |
-
- |
| 2280 |
Kailtech Test and Research Centre Pvt. Ltd., Indore
| 8125636
| IS 16242 : Part 1 (2014) |
Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS |
- |
125000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.5(Components) |
- |
1000 |
|
Testing Charges As per Parameter |
| 4.6(Power interface) |
- |
5000 |
|
Testing Charges As per Parameter |
| 4.7(Marking & instructions) |
- |
1000 |
|
Testing Charges As per Parameter |
| 5.1(Protection against shock and energy hazards) |
- |
5000 |
|
Testing Charges As per Parameter |
| 5.2(Requirement of auxiliary circuits) |
- |
6000 |
|
Testing Charges As per Parameter |
| 5.3(Protective earthing and bonding) |
- |
3000 |
|
Testing Charges As per Parameter |
| 5.4(AC and DC power isolation) |
- |
1000 |
|
Testing Charges As per Parameter |
| 5.5(Over current and earth fault condition) |
- |
2000 |
|
Testing Charges As per Parameter |
| 5.6(Safety interlocks) |
- |
1000 |
|
Testing Charges As per Parameter |
| 5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION) |
- |
15000 |
|
Testing Charges As per Parameter |
| 6.1(Wiring, connections and supply) |
- |
3000 |
|
Testing Charges As per Parameter |
| 6.2(Connection to power) |
- |
6000 |
|
Testing Charges As per Parameter |
| 6.3(Wiring terminals for external power conductors) |
- |
3000 |
|
Testing Charges As per Parameter |
| 7.1(Enclosure) |
- |
3000 |
|
Testing Charges As per Parameter |
| 7.2(STABILITY) |
- |
3000 |
|
Testing Charges As per Parameter |
| 7.3(MECHANICAL STRENGTH) |
- |
7000 |
|
Testing Charges As per Parameter |
| 7.4(Construction details) |
- |
3000 |
|
Testing Charges As per Parameter |
| 7.5(Resistance to fire) |
- |
8000 |
|
Testing Charges As per Parameter |
| 7.6(Battery location) |
- |
2000 |
|
Testing Charges As per Parameter |
| 7.7(Temperature rise) |
- |
6000 |
|
Testing Charges As per Parameter |
| 8.1(General procision for earth leakage) |
- |
5000 |
|
Testing Charges As per Parameter |
| 8.2(Electric Strength) |
- |
7000 |
|
Testing Charges As per Parameter |
| 8.3(Abnormal operating and fault conditions) |
- |
10000 |
|
Testing Charges As per Parameter |
| 9.0(Connection to telecommunication networks) |
- |
14000 |
|
Testing Charges As per Parameter |
|
18 Dec, 2027 |
-
- |
