| 2221 |
ACCURATE TEST SOLUTIONS LLP
| 8192806
| IS 10124 : Part 13 (2009) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 ½o BENDS |
20 MM TO 630 MM |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(General) |
- |
8000 |
|
- |
| 3.2.2, Table 2(Dimension of 11 1/4° bends for Elastomeric sealing ring joint) |
- |
1000 |
|
- |
| 3.2.2, Table 1(Dimension of 11 1/4° bends) |
- |
0 |
|
- |
| 3.2.3(Socket, Measurement) |
- |
1000 |
|
- |
|
08 Dec, 2028 |
-
Included w.e.f. 27.01.2026 |
| 2222 |
CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI
| 6167704
| IS 6719 (1972) |
Solid Pvc Soles And Heels |
- |
4950 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.6.1(Hardness ) |
- |
800 |
|
- |
| 3.6 (vi)(Lead (as Pb) ppm) |
- |
250 |
|
- |
| 3.6 (v)(Volatility, percent by means ) |
- |
250 |
|
- |
| 3.6 (iv)(Tear Strength a) Force Part b) Back Part ) |
- |
600 |
|
- |
| 3.6 (iii)(Elongation at break, percent ) |
- |
600 |
|
- |
| 3.6 (ii)(Tensile Strength ) |
- |
600 |
|
- |
| 3.6 (i)(Relative density ) |
- |
400 |
|
- |
| Table 1 (Flexing resistance)(Table 1 (Flexing resistance, Bennewart method, cut growth at the end of 30 000 cycles, mm, Max)) |
- |
600 |
|
- |
| Table 1 (Abrasion resistance)(Abrasion resistance at applied
force of 10 N (volume loss),
mm3, Max) |
- |
600 |
|
- |
| Cl. 3.1,3.2,3.3,3.4,3.5(Material) |
- |
0 |
|
- |
| Table 1 Cl. 3.6, Sl No (iii)(Volatility, Percent by mass) |
- |
250 |
|
- |
|
02 May, 2027 |
-
- |
| 2223 |
CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI
| 6167704
| IS 3976 (2018) |
Safety Rubber Canvas Boots for Miners †Specification ( Sixth Revision ) |
- |
14900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.5.2.5 Compact Sole Heel
Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested
as per corresponding test methods prescribed in col 4
of Table 2.
i)i) Hardness (IRHD) |
- |
0 |
|
- |
| Cl.6.3 Tear Strength of Compact Outsole(
When outsoles are tested in accordance to 8.2 of
IS 15298 (Part 1), the tear strength shall be not less
than 8 kN/m for material having density higher
than 0.9/cm³ and when density of material is less than
or equal to 0.9 g/cm³, tear strength shall not be less
than 5 kN/m.) |
- |
0 |
|
- |
| Cl.5.2.3 Coated Binding Material
IS 1954(
Coated binding materials shall conform to the
requirements given in col 3 of Table 1 when tested
according to the methods prescribed in col 4 of Table 1.
i)Width in mm,
) |
- |
0 |
|
- |
| Cl.5.2.1.4 ( Type 2 footwear, the composite upper
material shall comply with requirements of water coefficient as prescribed
in 5.4.6 of IS 15298 (Part 2).) |
- |
0 |
|
- |
| Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method
prescribed in 5.14 of IS 15298 (Part 1), the energy
absorption of the seat region shall not be less than 20 J.) |
- |
500 |
|
- |
| Cl.5.2.3 Coated Binding Material
Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) ) |
- |
0 |
|
- |
| Cl.5.2.1.4 ( Type 2 footwear, the composite upper
material shall comply with requirements of water
vapour permeability as prescribed
in 5.4.6 of IS 15298 (Part 2).) |
- |
0 |
|
- |
| CL.5.2.10 Counter Stiffener(
A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having
thickness not less than 1.5 mm is to be stitched at inside
of upper so as to fortify the back of the footwear at
joints of quarter.) |
- |
0 |
|
- |
| Cl.5.1.1 Fittings(Fittings of the footwear shall be in conformity to Table 9
of IS 1638 (measurement of men’s lasts) and Table 8
of IS 1638 (measurement of women’s lasts).) |
- |
0 |
|
- |
| Cl.5.2.1 Upper
Cl.5.2.1.1
IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load
of 1.5 kg.)) |
- |
600 |
|
- |
| Cl.5.2.1.2( Composite upper material shall comply with
tear strength as per 5.4.3 of IS 15298 (Part 2).) |
- |
600 |
|
- |
| Cl.5.2.1.3 ,
Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance
with 6.5 of IS 15298 (Part 1).) |
- |
600 |
|
- |
| Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).) |
- |
700 |
|
- |
| Cl.5.2.2 Compact Insole/Compact Insocks/Counter
Stiffener Lining(Textile material shall be used as lining material for
compact insole/compact insocks / counter stiffener. It
shall meet the requirement of tear strength as prescribed
in 5.6.1 of IS 15298 (Part 2).) |
- |
0 |
|
- |
| Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/
counter stiffener(
When textiles used as lining for all the above are tested
in accordance with 6.12 of IS 15298 (Part 1), the lining
shall not develop any holes before the following number
of cycles has been performed:) |
- |
0 |
|
- |
| Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in
accordance with Annex B.) |
- |
0 |
|
- |
| Cl.5.2.5 Compact Sole Heel
Cl. 5.2.5.1
(The compact sole heel shall be made out
of polymeric/rubber components and the typical design
recommendation (not mandatory) of compact sole heel
is as shown in Fig. 3. Sectional view of Type 1/Type 2
)
toe position is given in Fig. 4.) |
- |
0 |
|
- |
| Cl.5.2.5 Compact Sole Heel
5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after
accelerated ageing at 100 ± 2
°C for 24 h
) |
- |
800 |
|
- |
| Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when
the outer sole heel is made of bi-polymer, the finished
boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not
develop any sign of tackiness or brittleness.) |
- |
0 |
|
- |
| Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall
comply with the thickness and material requirements
prescribed in Table 3.) |
- |
0 |
|
- |
| Cl.5.2.5.4 Thickness of compact sole hee(of black cotton thread, the same shall be free from
sulphur dyes when tested in accordance with
Annex B.) |
- |
0 |
|
- |
| Cl.5.2.6 Thread for Upper Closing(
The length (m/kg) and construction of sewing thread
shall conform to requirements as prescribed in
Table 4.) |
- |
0 |
|
- |
| Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.) |
- |
1000 |
|
- |
| Cl- 5.2.8.1 (Amendment No. 2)(General) |
- |
0 |
|
- |
| Cl- 5.2.8.2 (Amendment No. 2)(Internal length of toecap) |
- |
0 |
|
- |
| Cl- 5.2.8.3 (Amendment No. 2)(Corrosion resistance) |
- |
400 |
|
- |
| Cl- 5.2.9.5 (Amendment No. 2)(Breaking load and tag retention) |
- |
600 |
|
- |
| Cl.5.3.2 (The tongue shall be made out of composite upper
material and shall be half bellow type for Type 2 and
full bellow type for Type 1.) |
- |
0 |
|
- |
| Cl.5.3.5 Outer toe cap( shall be provided which is made
of polymer/rubber and it shall be strongly adhered such
that it shall not open up or come out while in use. Toe
of the boot shall be reinforced with safety toe cap) |
- |
0 |
|
- |
| Cl.5.3.6( A designed foxing of width of minimum 25 mm
and of thickness of minimum 2 mm is to be provided.
The foxing shall not extend the edges of the outer
sole.) |
- |
0 |
|
- |
| Cl.5.3.7( Two pairs of detachable insocks are to be
provided. The insocks shall be compact in nature having
thickness not less than 2 mm.) |
- |
0 |
|
- |
| Cl.5.4 Finish(
In appearance, general workmanship and in all other
respects with regard to finish and get up of the footwear,
the footwear shall be matching to the approved sample
of the purchaser.) |
- |
0 |
|
- |
| Cl.5.5 Mass(The mass of one pair of finished footwear of size 8
shall not exceed 1 500 g for Type 1 and 1 400 g for
Type 2 with an increase or decrease of 100 g for each
bigger or smaller size, respectively.) |
- |
0 |
|
- |
| Cl.5.6( Height of Upper
Height of upper of the boots shall conform to column 5
(Design C) and column 4 (Design B) of 5.2.2, Table 4
of IS 15298 (Part 2) for Type 1 and Type 2, respectively
when measured as per 6.2 of IS 15298 (Part 1) on the
inside of the back of the footwear and from seat of the
insole to top edge of the upper.) |
- |
0 |
|
- |
| Cl.5.7 Performance Test(When safety footwear is tested in accordance with the
method described in 5.4 of IS 15298 (Part 1), at an
impact energy of (200 ± 4) J, the clearance under the
toecap at the moment of impact shall be in accordance
with Table 5. In addition, the toecap shall not develop
any cracks which go through the material, that is,
through which light can be seen.) |
- |
0 |
|
- |
| Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the
method prescribed in 5.2 of IS 15298 (Part 1), the bond
strength shall not be less than 4.0 N/mm, unless there
is tearing of the sole in which case the bond strength
shall not be less than 3.0 N/mm.) |
- |
1200 |
|
- |
| Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer(
and Bi-density Sole
When tested in accordance with 5.2 of IS 15298 (Part 1),
the bond strength between the outer or cleated layer
and the adjacent layer shall not be less than 4.0 N/mm
unless there is tearing of any part of the sole, in which
case the bond strength shall not be less than 3.0 N/mm.) |
- |
0 |
|
- |
| Cl.5.10 Consolidation Test(
Representative sample of width 25 ± 0.5 mm are cut
out from the quarter of the upper along the length of
boot. The plies are separated by breaking the bond.
Carry out the test on two specimens in accordance with
IS 3400 (Part 5). Th) |
- |
0 |
|
- |
| Cl.5.11 Compression Resistance(
5.11.1 When safety boots are tested in accordance
with 5.5 of IS 15298 (Part 1), the clearance under the
toe cap at a compression load of 15 kN ± 0.1 kN shall
be in accordance with Table 5.) |
- |
0 |
|
- |
| Cl.5.12 Internal Length of Toe Cap(
For safety boots, internal length of the toe cap shall
meet the specification given in Table 5 of IS 15298
(Part 2) when tested as per 5.3 of IS 15298 (Part 1).) |
- |
0 |
|
- |
| Cl.6.1 Abrasion Resistance of Compact Outsole(
When outsole is tested in accordance with 8.3 of
IS 15298 (Part 1), the relative volume loss shall not
be greater than 250 mm³ for materials having density
0.9 g/cm³ or less, and not greater than 150 mm³ for
materials with density greater than 0.9 g/cm³.) |
- |
400 |
|
- |
| Cl.6.2 Flexing Resistance of Compact Outsole(
When outsole is tested in accordance with 8.4 of
IS 15298 (Part 1), the cut growth shall not be greater
than 4 mm before 30 000 cycles.) |
- |
500 |
|
- |
| Cl.6.4 Resistance to Hot Contact( — Sole Heel
When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform
and shall not develop any cracks when bent around the
mandrel.) |
- |
600 |
|
- |
| Cl.6.5 Hydrolysis(
When bottom sole or other components are made out
of polyurethane, the same shall be tested in accordance
with 8.5 of IS 15298 (Part 1) and the same shall comply
with 5.8.5 of IS 15298 (Part 2).) |
- |
600 |
|
- |
| Cl.5.2.5 Compact Sole Heel
Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested
as per corresponding test methods prescribed in col 4
of Table 2.
i)i) Hardness (IRHD) |
- |
0 |
|
- |
| Cl.5.2.5 Compact Sole Heel
5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after
accelerated ageing at 100 ± 2
°C for 24 h
) |
- |
0 |
|
- |
| Cl.5.2.3 Coated Binding Material
IS 1954(
Coated binding materials shall conform to the
requirements given in col 3 of Table 1 when tested
according to the methods prescribed in col 4 of Table 1.
i)Width in mm,
) |
- |
0 |
|
- |
| Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method
prescribed in 5.14 of IS 15298 (Part 1), the energy
absorption of the seat region shall not be less than 20 J.) |
- |
0 |
|
- |
| Cl.5.2.3 Coated Binding Material
Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) ) |
- |
600 |
|
- |
| Cl.5.2.1.4 ( Type 2 footwear, the composite upper
material shall comply with requirements of water
vapour permeability as prescribed
in 5.4.6 of IS 15298 (Part 2).) |
- |
600 |
|
- |
| CL.5.2.10 Counter Stiffener(
A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having
thickness not less than 1.5 mm is to be stitched at inside
of upper so as to fortify the back of the footwear at
joints of quarter.) |
- |
0 |
|
- |
| Cl.5.1.1 Fittings(Fittings of the footwear shall be in conformity to Table 9
of IS 1638 (measurement of men’s lasts) and Table 8
of IS 1638 (measurement of women’s lasts).) |
- |
0 |
|
- |
| Cl.5.2.1 Upper
Cl.5.2.1.1
IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load
of 1.5 kg.)) |
- |
0 |
|
- |
| Cl.5.2.1.2( Composite upper material shall comply with
tear strength as per 5.4.3 of IS 15298 (Part 2).) |
- |
0 |
|
- |
| Cl.5.2.1.3 ,
Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance
with 6.5 of IS 15298 (Part 1).) |
- |
0 |
|
- |
| Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).) |
- |
0 |
|
- |
| Cl.5.2.2 Compact Insole/Compact Insocks/Counter
Stiffener Lining(Textile material shall be used as lining material for
compact insole/compact insocks / counter stiffener. It
shall meet the requirement of tear strength as prescribed
in 5.6.1 of IS 15298 (Part 2).) |
- |
0 |
|
- |
| Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/
counter stiffener(
When textiles used as lining for all the above are tested
in accordance with 6.12 of IS 15298 (Part 1), the lining
shall not develop any holes before the following number
of cycles has been performed:) |
- |
0 |
|
- |
| Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in
accordance with Annex B.) |
- |
0 |
|
- |
| Cl.5.2.5 Compact Sole Heel
Cl. 5.2.5.1
(The compact sole heel shall be made out
of polymeric/rubber components and the typical design
recommendation (not mandatory) of compact sole heel
is as shown in Fig. 3. Sectional view of Type 1/Type 2
)
toe position is given in Fig. 4.) |
- |
0 |
|
- |
| Cl.5.2.5 Compact Sole Heel
5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after
accelerated ageing at 100 ± 2
°C for 24 h
) |
- |
0 |
|
- |
| Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when
the outer sole heel is made of bi-polymer, the finished
boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not
develop any sign of tackiness or brittleness.) |
- |
0 |
|
- |
| Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall
comply with the thickness and material requirements
prescribed in Table 3.) |
- |
0 |
|
- |
| Cl.5.2.6 Thread for Upper Closing(
The length (m/kg) and construction of sewing thread
shall conform to requirements as prescribed in
Table 4.) |
- |
0 |
|
- |
| Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.) |
- |
0 |
|
- |
| Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum
100 cm for Type 2.) |
- |
0 |
|
- |
| Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be
achieved when tested between 18 cm grip length in
accordance with Annex C.) |
- |
0 |
|
- |
| Cl.5.2.8.3( In case of cotton lace of black colour, the same
shall be free from sulphur dyes when tested in
accordance with Annex B. Two ends of the laces shall
be provided with plastic tips.) |
- |
0 |
|
- |
| Cl.5.2.9 Eyelets(
Aluminum eyelets of external collar diameter not less
than 10 mm and wall thickness of 0.30 to 0.35 mm
shall be used.) |
- |
0 |
|
- |
| Cl.5.3.2 (The tongue shall be made out of composite upper
material and shall be half bellow type for Type 2 and
full bellow type for Type 1.) |
- |
0 |
|
- |
| Cl.5.3.5 Outer toe cap( shall be provided which is made
of polymer/rubber and it shall be strongly adhered such
that it shall not open up or come out while in use. Toe
of the boot shall be reinforced with safety toe cap) |
- |
0 |
|
- |
| Cl.5.3.6( A designed foxing of width of minimum 25 mm
and of thickness of minimum 2 mm is to be provided.
The foxing shall not extend the edges of the outer
sole.) |
- |
0 |
|
- |
| Cl.5.3.7( Two pairs of detachable insocks are to be
provided. The insocks shall be compact in nature having
thickness not less than 2 mm.) |
- |
0 |
|
- |
| Cl.5.4 Finish(
In appearance, general workmanship and in all other
respects with regard to finish and get up of the footwear,
the footwear shall be matching to the approved sample
of the purchaser.) |
- |
0 |
|
- |
| Cl.5.5 Mass(The mass of one pair of finished footwear of size 8
shall not exceed 1 500 g for Type 1 and 1 400 g for
Type 2 with an increase or decrease of 100 g for each
bigger or smaller size, respectively.) |
- |
0 |
|
- |
| Cl.5.6( Height of Upper
Height of upper of the boots shall conform to column 5
(Design C) and column 4 (Design B) of 5.2.2, Table 4
of IS 15298 (Part 2) for Type 1 and Type 2, respectively
when measured as per 6.2 of IS 15298 (Part 1) on the
inside of the back of the footwear and from seat of the
insole to top edge of the upper.) |
- |
0 |
|
- |
| Cl.5.7 Performance Test(When safety footwear is tested in accordance with the
method described in 5.4 of IS 15298 (Part 1), at an
impact energy of (200 ± 4) J, the clearance under the
toecap at the moment of impact shall be in accordance
with Table 5. In addition, the toecap shall not develop
any cracks which go through the material, that is,
through which light can be seen.) |
- |
0 |
|
- |
| Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the
method prescribed in 5.2 of IS 15298 (Part 1), the bond
strength shall not be less than 4.0 N/mm, unless there
is tearing of the sole in which case the bond strength
shall not be less than 3.0 N/mm.) |
- |
0 |
|
- |
| Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer(
and Bi-density Sole
When tested in accordance with 5.2 of IS 15298 (Part 1),
the bond strength between the outer or cleated layer
and the adjacent layer shall not be less than 4.0 N/mm
unless there is tearing of any part of the sole, in which
case the bond strength shall not be less than 3.0 N/mm.) |
- |
0 |
|
- |
| Cl.5.10 Consolidation Test(
Representative sample of width 25 ± 0.5 mm are cut
out from the quarter of the upper along the length of
boot. The plies are separated by breaking the bond.
Carry out the test on two specimens in accordance with
IS 3400 (Part 5). Th) |
- |
0 |
|
- |
| Cl.5.11 Compression Resistance(
5.11.1 When safety boots are tested in accordance
with 5.5 of IS 15298 (Part 1), the clearance under the
toe cap at a compression load of 15 kN ± 0.1 kN shall
be in accordance with Table 5.) |
- |
0 |
|
- |
| Cl.5.12 Internal Length of Toe Cap(
For safety boots, internal length of the toe cap shall
meet the specification given in Table 5 of IS 15298
(Part 2) when tested as per 5.3 of IS 15298 (Part 1).) |
- |
0 |
|
- |
| Cl.6.1 Abrasion Resistance of Compact Outsole(
When outsole is tested in accordance with 8.3 of
IS 15298 (Part 1), the relative volume loss shall not
be greater than 250 mm³ for materials having density
0.9 g/cm³ or less, and not greater than 150 mm³ for
materials with density greater than 0.9 g/cm³.) |
- |
0 |
|
- |
| Cl.6.2 Flexing Resistance of Compact Outsole(
When outsole is tested in accordance with 8.4 of
IS 15298 (Part 1), the cut growth shall not be greater
than 4 mm before 30 000 cycles.) |
- |
0 |
|
- |
| Cl.6.4 Resistance to Hot Contact( — Sole Heel
When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform
and shall not develop any cracks when bent around the
mandrel.) |
- |
600 |
|
- |
| Cl.6.5 Hydrolysis(
When bottom sole or other components are made out
of polyurethane, the same shall be tested in accordance
with 8.5 of IS 15298 (Part 1) and the same shall comply
with 5.8.5 of IS 15298 (Part 2).) |
- |
600 |
|
- |
| Cl.5.2.8.3( In case of cotton lace of black colour, the same
shall be free from sulphur dyes when tested in
accordance with Annex B. Two ends of the laces shall
be provided with plastic tips.) |
- |
0 |
|
- |
| Cl. 8 (IS 17011, Table-1 (i))(Allergenic and carcinogenic disperse dyes) |
- |
0 |
|
- |
| Cl- 5.2.9.6.1 (Amendment No. 2)(Abrasion resistance- Lace to lace) |
- |
400 |
|
- |
| Cl- 5.2.9.6.2 (Amendment No. 2)(Abrasion resistance- Lace to eyelet) |
- |
400 |
|
- |
| Cl- 5.2.10 (Amendment No. 2)(Force required to pull out the eyelets) |
- |
400 |
|
- |
| Cl- 5.2.12.1 (Amendment No. 2)(Insole- Material and thickness) |
- |
0 |
|
- |
| Cl- 5.2.12.2 (Amendment No. 2)(Insole- Abrasion resistance) |
- |
400 |
|
- |
| Cl- 5.2.12.3 (Amendment No. 2)(Insole- Water absorption and desorption) |
- |
600 |
|
- |
| Cl- 5.2.13.1 (Amendment No. 2)(Insock- Abrasion resistance) |
- |
600 |
|
- |
| Cl- 5.2.13.2 (Amendment No. 2)(Insock- Water absorption and desorption) |
- |
600 |
|
- |
|
02 May, 2027 |
-
- |
| 2224 |
CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI
| 6167704
| IS 6664 (1992) |
Rubber microcellular sheets for soles and heels - Specification (First Revision) |
- |
6900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2(Shrinkage at room temp) |
- |
0 |
|
NA |
| 4.2(Split tear strength) |
- |
600 |
|
NA |
| 4.2(Compression set) |
- |
1000 |
|
NA |
| 4.2(Hardness (Shore A)) |
- |
800 |
|
NA |
| 4.2(Density ) |
- |
400 |
|
NA |
| 4.2(Size & Thickness ) |
- |
0 |
|
NA |
| Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density) |
- |
400 |
|
- |
| Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min) |
- |
800 |
|
- |
| Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr) |
- |
800 |
|
- |
| Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max) |
- |
1000 |
|
- |
| Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min) |
- |
600 |
|
- |
| Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max) |
- |
0 |
|
- |
| Cl.4.1.3 and 8.3,Table 1 vii(Abrasion resistance at applied force of 5 N) |
- |
500 |
|
- |
| Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max) |
- |
0 |
|
- |
|
02 May, 2027 |
-
- |
| 2225 |
CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI
| 6167704
| IS 3735 (1996) |
Canvas Shoes, Rubber Sole |
- |
12500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.5 Consolidation Test
IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot
and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load
Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note
under 4.4).') |
- |
0 |
|
NA |
| 4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended
conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the
requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. ) |
- |
0 |
|
NA |
| Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight
shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985
shall be considered as referee method.) |
- |
0 |
|
NA |
| Cl.4.1.2 Binding Material(IS 1954 : 1990)
(IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of
Table 2, when tested in accordance with the methods referred to in col 4 of the table.) |
- |
0 |
|
NA |
| Cl.4.1.2.1
Anmex B.(Cotton, manmade or blended shall be used as binding material.'
'Coloured cotton tapes shall have fastness to day light of rating as and if agreed
to between the purchaser and the supplier when tested in accordance with IS 686 :
1985. The black tapes shall be free from sulphur dyes when tested in accordance
with Annex B.') |
- |
0 |
|
NA |
| Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of
upper. For cotton variety thread shall conform to variety No. 28 of IS 1720.
Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred
requirement of specification.
Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543.
Any other suitable thread shall have breaking load not less than above referred
requirement of specification.') |
- |
0 |
|
NA |
| Cl.4.1.3.2 (IS 2454 : 1985)
IS 765 : 1979
IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.) |
- |
0 |
|
NA |
| Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to
0.35 mm shall be used.') |
- |
0 |
|
NA |
| Cl.4.1.5 Laces(
The shoes shall be provided with fabric braided laces
either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm ) |
- |
0 |
|
NA |
| Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with
IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.) |
- |
0 |
|
NA |
| Cl.4.1.5 Laces
Annex B(In case the laces are black,
the same shall pass the test for freedom from sulpher
dyes when tested in accordance with Annex B. The
two ends of the lace shall be provided with suitable
metal or plastic tips.) |
- |
0 |
|
NA |
| Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS
13695 : 1993 shall be followed.') |
- |
0 |
|
NA |
| Cl.4.1.6.2 Ageing
col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements
prescribed in col 4 of Table 5. ) |
- |
0 |
|
NA |
| Cl.4.1.6.3 Thickness of components
in Table 6.(Individual components of the shoes shall comply with
the thickness and material requirements prescribed
in Table 6.) |
- |
0 |
|
NA |
| CL.4.2 Shape and Design
IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design
and pattern as agreed to between the purchaser and
the supplier. Size and fittings of the shoes shall be
in accordance with IS 1638 : 1969 unless otherwise
specified by the purchaser.) |
- |
0 |
|
NA |
| Cl.4.2.2( The recommended design of canvas shoes is
shown in Fig. 1.) |
- |
0 |
|
NA |
| Cl.4.3 Construction
Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to
40 per dm.) |
- |
0 |
|
NA |
| Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when
there is a seam.') |
- |
0 |
|
NA |
| Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge
with white/scoured binding material cut in bias and formed as a tape. T ) |
- |
0 |
|
NA |
| Cl.4.3.3(he number of stitches shall be
30 to 40 per decimetre. The counter binding shall
meet the binding of the upper at the centre top edge
of the heel.) |
- |
0 |
|
NA |
| Cl.4.3.3(The edges of quarter shall be bound with
dyed cotton binding material or matching to the colour
of the upper, cut in bias and formed as a tape.) |
- |
0 |
|
NA |
| Cl.4.3.4 (The vantp shall be strengthened with a rubber
toe-cap (see Fig. 1).) |
- |
0 |
|
NA |
| Cl.4.3.5( Five pairs of eyelets shall be fitted in each
shoe. The eyelets shall be properly clenched without
any distortion. It shall properly match the colour of
the upper canvas, or as agreed to between the purchaser
and the supplier.) |
- |
0 |
|
NA |
| Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and
excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined
in the standard, the shoes shall be similar to the
sample approved by the purchaser, if any) |
- |
0 |
|
NA |
| CL.4.3.7( The soles shall be of even substance and ofone layer only.) |
- |
0 |
|
NA |
| Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. ) |
- |
0 |
|
NA |
| Cl.4.3.8(The foxing, not less
than 18 mm wide, shall not extend beyond the edges of the sole at the bottom) |
- |
0 |
|
NA |
| Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out
the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There
shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.) |
- |
0 |
|
NA |
| CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively) |
- |
0 |
|
NA |
| 4.8(Adhesion ) |
- |
0 |
|
NA |
| 4.7(Consolidation test ) |
- |
0 |
|
NA |
| 4.6(Mass ) |
- |
0 |
|
NA |
| 4.5(Finish ) |
- |
0 |
|
NA |
| 4.4(Contruction ) |
- |
0 |
|
NA |
| 4.3(Leg Height ) |
- |
0 |
|
NA |
| 4.2(Design ) |
- |
0 |
|
NA |
| 4.1.6.2(Thickness of components ) |
- |
0 |
|
NA |
| 4.1.6.2(Ageing) |
- |
0 |
|
NA |
| 4.1.6.2(Elongation at break after ageing ) |
- |
0 |
|
NA |
| 4.1.6.2(Tensile after ageing ) |
- |
0 |
|
NA |
| 4.1.6(Compression set ) |
- |
0 |
|
NA |
| 4.1.6(Elongation at break ) |
- |
0 |
|
NA |
| 4.1.6(Tensile strength) |
- |
0 |
|
NA |
| 4.1.6(Hardness (after accelerated )) |
- |
0 |
|
NA |
| 4.1.6(Flexing resistance test) |
- |
0 |
|
NA |
| 4.1.6(Hardness ) |
- |
0 |
|
NA |
| 4.1.6(Relative density) |
- |
0 |
|
NA |
| 4.1.5(Sulpher dyes content ) |
- |
0 |
|
NA |
| 4.1.5(Breaking Load ) |
- |
0 |
|
NA |
| 4.1.5(Length ) |
- |
0 |
|
NA |
| 4.1.4(Thickness) |
- |
0 |
|
NA |
| 4.1.4(Size ) |
- |
0 |
|
NA |
| 4.1.3(Color fastness to perspiration) |
- |
0 |
|
NA |
| 4.1.3(Colorfastness to washing) |
- |
0 |
|
NA |
| 4.1.3(Colorfastness to light ) |
- |
0 |
|
NA |
| 4.1.3(Single thread breaking load) |
- |
0 |
|
NA |
| 4.1.3(Construction ) |
- |
0 |
|
NA |
| 4.1.2(Colorfastness to light ) |
- |
0 |
|
NA |
| 4.1.2(Colorfastness to washing) |
- |
0 |
|
NA |
| 4.1.2(Breaking Strength ) |
- |
0 |
|
NA |
| 4.1.2(Width ) |
- |
0 |
|
NA |
| 4.1.1.2(Colorfastness to washing) |
- |
0 |
|
NA |
| 4.1.1.1(Colorfastness to light ) |
- |
0 |
|
NA |
| 4.1.1 (Drill) (End & Picks/dm) |
- |
0 |
|
NA |
| 4.1.1 (Drill) (Colorfastness to light ) |
- |
0 |
|
NA |
| 4.1.1 (canvas )(End & Picks/dm) |
- |
0 |
|
NA |
| 4.1.1 (canvas )(Breaking Load ) |
- |
0 |
|
NA |
| Cl.4.3.8(The foxing, not less
than 18 mm wide, shall not extend beyond the edges of the sole at the bottom) |
- |
0 |
|
- |
|
02 May, 2027 |
-
- |
| 2226 |
The National Small Industries Corporation Ltd (NSIC), Chennai
| 6135404
| IS 11501 (2023) |
Engine Monoset Pumps for Clear, Cold, Water for Agricultural Purposes � Specification ( First Revision ) |
0.18 kW - 20 kW |
950013200 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-6.1(Materials of construction) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-12.4.1(For Compression Ignition Engine Monosets (Diesel Engines)) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-12.4.2(For spark-ignition engine monosets (petrol and/or kerosene engines) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-15(Marking) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-6.1(Materials of construction) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-6.2(Gaskets, Seals, and Packings) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-7(Direction of rotation) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-8(Suction limitations) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-9(Factors affecting pump performance) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-10(Design Features) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-11.1(The general requirements) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-11.2(Casing) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-11.3(Impeller) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-11.4(Shaft) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-12.1 (a)(Engine Testing- Constant speed) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-12.1 (b)(Engine Testing- Spark ignition engines) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-12.2(The various measurements and checking of measuring instrument for total head and discharge) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-12.3.1(Performance Tests and Guarantee of Performance (For Total Head & Discharge Rate measurement of different Heads) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl-12.3.1(Pumps of self-priming) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
| Cl- 12.3.2, 12.3.3 12.4, 12.5(Fuel Consumption Test) |
- |
9500 |
|
0.37-3.7KW 9500/-
3.7KW -7.5KW 10500/-
7.51KW -11KW 11000/-
11.1KW-15KW 12500/-
15.1KW -20KW 13200/- |
|
- |
-
- |
| 2227 |
RTC cum Technology Back up Unit for Solar Thermal Devices (RTC), Pune
| 7165924
| IS 12933 : Part 1 (2003) |
Solar flat plate collector - Specification: Part 1 requirements (Second Revision) |
Designed for Normal Fluid Temp. less than 100 Degree C |
100000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1.1(Static Pressure Leakage Test) |
- |
3000 |
|
GST Extra |
| 7.2.1(Outdoor No Flow Exposure Test ) |
- |
3000 |
|
GST Extra |
| 7.2.2(External Thermal Shock Test ) |
- |
3000 |
|
GST Extra |
| 7.2.2(Internal Thermal Shock Test ) |
- |
3000 |
|
GST Extra |
| 7.2.4(Rain Penetration Test) |
- |
3000 |
|
GST Extra |
| 7.2.5(Impact Resistance Test) |
- |
3000 |
|
GST Extra |
| 7.2.6(Thermal Efficiency Test) |
- |
45000 |
|
GST Extra |
| 7.2.7(Determination of the Time Constant ) |
- |
3000 |
|
GST Extra |
| 7.2.8(Incident Angle Modifier Test) |
- |
22000 |
|
GST Extra |
| 4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2)) |
- |
6000 |
|
GST Extra |
| 5(SHAPE AND DIMENSIONS) |
- |
6000 |
|
GST Extra |
|
26 Oct, 2026 |
-
- |
| 2228 |
CONFORMITY TESTING LABS PVT LTD (WH52)
| 8134626
| IS/IEC 62368 : Part 1 (2023) |
Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision) |
- |
190000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.1(General- materials, components) |
- |
5000 |
|
- |
| Cl-4.2(Energy source classifications) |
- |
5000 |
|
- |
| Cl-4.3(Protection against energy sources) |
- |
5000 |
|
- |
| Cl-4.4(Safeguards) |
- |
5000 |
|
- |
| Cl-4.5(Explosion) |
- |
10000 |
|
- |
| Cl-4.6(Fixing of conductors and conductive parts) |
- |
5000 |
|
- |
| Cl-4.7(Equipment for direct insertion into mains socket-outlets) |
- |
5000 |
|
- |
| Cl-4.8(Equipment containing coin or button cell batteries) |
- |
15000 |
|
- |
| Cl-4.9(Likelihood of fire or shock due to entry of conductive objects) |
- |
5000 |
|
- |
| Cl-4.10(Components requirements) |
- |
5000 |
|
- |
| Cl-5.1(General- Electrically-caused injury) |
- |
5000 |
|
- |
| Cl-5.2(Classification and limits of electrical energy sources) |
- |
10000 |
|
- |
| Cl-5.4(Insulation materials and requirements) |
- |
50000 |
|
- |
| Cl-5.5(Components as safeguards) |
- |
25000 |
|
- |
| Cl-5.6(Protective conductor) |
- |
10000 |
|
- |
| Cl-5.7(Prospective touch voltage, touch current and protective conductor current) |
- |
10000 |
|
- |
| Cl-5.8(Backfeed safeguard in battery backed up supplies) |
- |
15000 |
|
- |
| Cl-6.1(General- Electrically-caused fire) |
- |
5000 |
|
- |
| Cl-6.2(Classification of power sources and potential ignition sources) |
- |
20000 |
|
- |
| Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions) |
- |
10000 |
|
- |
| Cl-6.4(Safeguards against fire under single fault conditions) |
- |
15000 |
|
- |
| Cl-6.5(Internal and external wiring) |
- |
25000 |
|
- |
| Cl-7.1(General- Injury caused by hazardous substances) |
- |
5000 |
|
- |
| Cl-7.2(Reduction of exposure to hazardous substances) |
- |
25000 |
|
- |
| Cl-7.3(Ozone exposure) |
- |
25000 |
|
- |
| Cl-7.4(Use of personal safeguards or personal protective equipment (PPE) |
- |
5000 |
|
- |
| Cl-7.5(Use of instructional safeguards and instructions) |
- |
5000 |
|
- |
| Cl-8.1(General- Mechanically-caused injury) |
- |
5000 |
|
- |
| Cl-8.2(Mechanical energy source classifications) |
- |
5000 |
|
- |
| Cl-8.3(Safeguards against mechanical energy sources) |
- |
5000 |
|
- |
| Cl-8.4(Safeguards against parts with sharp edges and corners) |
- |
5000 |
|
- |
| Cl-8.5(Safeguards against moving parts) |
- |
5000 |
|
- |
| Cl-8.6(Stability of equipment) |
- |
5000 |
|
- |
| Cl-8.7(Equipment mounted to a wall, ceiling or other structure) |
- |
5000 |
|
- |
| Cl-8.9(Wheels or casters attachment requirements) |
- |
5000 |
|
- |
| Cl-8.10(Carts, stands, and similar carriers) |
- |
5000 |
|
- |
| Cl-8.11(Mounting means for slide-rail mounted equipment (SRME)) |
- |
10000 |
|
- |
| Cl-9.1(General-Thermal burn injury) |
- |
5000 |
|
- |
| Cl-9.2(Thermal energy source classifications) |
- |
5000 |
|
- |
| Cl-9.3(Touch temperature limits) |
- |
5000 |
|
- |
| Cl-9.4(Safeguards against thermal energy sources) |
- |
5000 |
|
- |
| Cl-9.5(Requirements for safeguards) |
- |
5000 |
|
- |
| Cl-9.6(Requirements for wireless power transmitters) |
- |
10000 |
|
- |
| Cl-10.1(General-Radiation) |
- |
5000 |
|
- |
| Cl-10.2(Radiation energy source classifications) |
- |
5000 |
|
- |
| Cl-10.3(Safeguards against laser radiation) |
- |
5000 |
|
- |
| Cl-10.4("Safeguards against optical radiation from lamps and lamp systems
(including LED types)") |
- |
5000 |
|
- |
| Cl-10.5(Safeguards against X-radiation) |
- |
5000 |
|
- |
| Cl-10.6(Safeguards against acoustic energy sources) |
- |
10000 |
|
- |
| Annex A(Examples of equipment within the scope of this document) |
- |
5000 |
|
- |
| Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests) |
- |
5000 |
|
- |
| Annex B-2(Normal operating conditions) |
- |
15000 |
|
- |
| Annex B-3(Simulated abnormal operating conditions) |
- |
20000 |
|
- |
| Annex B-4(Simulated single fault conditions) |
- |
20000 |
|
- |
| Annex D-1(Impulse test generators) |
- |
10000 |
|
- |
| Annex D-2(Antenna interface test generator) |
- |
15000 |
|
- |
| Annex D-3(Electronic pulse generator) |
- |
10000 |
|
- |
| Annex E-1(Electrical energy source classification for audio signals) |
- |
15000 |
|
- |
| Annex E-2(Audio signals used during test) |
- |
15000 |
|
- |
| Annex E-3(Operating conditions of equipment containing an audio amplifier) |
- |
15000 |
|
- |
| Annex F-1(General-Equipment markings, instructions, and instructional safeguards) |
- |
5000 |
|
- |
| Annex F-2(Letter symbols and graphical symbols) |
- |
5000 |
|
- |
| Annex F-3(Equipment markings) |
- |
5000 |
|
- |
| Annex F-4(Instructions) |
- |
5000 |
|
- |
| Annex F-5(Instructional safeguards) |
- |
5000 |
|
- |
| Annex G-1(Switches) |
- |
15000 |
|
- |
| Annex G-2(Relays) |
- |
15000 |
|
- |
| Annex G-3(Protective devices) |
- |
5000 |
|
- |
| Annex G-4(Connectors) |
- |
5000 |
|
- |
| Annex G-5(Wound components) |
- |
20000 |
|
- |
| Annex G-6(Wire insulation) |
- |
5000 |
|
- |
| Annex G-7(Mains power supply cords and interconnection cables) |
- |
10000 |
|
- |
| Annex G-8(Varistors) |
- |
5000 |
|
- |
| Annex G-9(Integrated circuit (IC) current limiters) |
- |
5000 |
|
- |
| Annex G-10(Resistors) |
- |
5000 |
|
- |
| Annex G-12(Optocouplers) |
- |
5000 |
|
- |
| Annex G-13(Printed boards) |
- |
5000 |
|
- |
| Annex G-14(Coatings on component terminals) |
- |
5000 |
|
- |
| Annex G-15(Pressurized liquid filled components or LFC assemblies) |
- |
5000 |
|
- |
| Annex G-16(IC that includes a capacitor discharge function (ICX)) |
- |
10000 |
|
- |
| Annex H-1(General- Criteria for telephone ringing signals) |
- |
20000 |
|
- |
| Annex H-2(Method A) |
- |
5000 |
|
- |
| Annex H-3(Method B) |
- |
5000 |
|
- |
| Annex I(Overvoltage categories (see IEC 60364-4-44)) |
- |
5000 |
|
- |
| Annex J-1(General-Insulated winding wires for use without interleaved insulation) |
- |
10000 |
|
- |
| Annex J-2(Type tests) |
- |
10000 |
|
- |
| Annex J-3(Testing during manufacturing) |
- |
15000 |
|
- |
| Annex K-1(General- Safety interlocks) |
- |
25000 |
|
- |
| Annex K-2(Components of the safety interlock safeguard mechanism) |
- |
20000 |
|
- |
| Annex K-3(Inadvertent change of operating mode) |
- |
35000 |
|
- |
| Annex K-4(Interlock safeguard override) |
- |
15000 |
|
- |
| Annex K-5(Fail-safe) |
- |
15000 |
|
- |
| Annex K-6(Mechanically operated safety interlocks) |
- |
10000 |
|
- |
| Annex K-7(Interlock circuit isolation) |
- |
10000 |
|
- |
| Annex L-1(General requirements) |
- |
5000 |
|
- |
| Annex L-2(Permanently connected equipment) |
- |
5000 |
|
- |
| Annex L-3() |
- |
5000 |
|
- |
| Annex L-4(Single-phase equipment) |
- |
5000 |
|
- |
| Annex L-5(Three-phase equipment) |
- |
5000 |
|
- |
| Annex L-6(Switches as disconnect devices) |
- |
5000 |
|
- |
| Annex L-7(Plugs as disconnect devices) |
- |
5000 |
|
- |
| Annex L-8(Multiple power sources) |
- |
5000 |
|
- |
| Annex L-9(Compliance criteria) |
- |
5000 |
|
- |
| Annex M-1(General requirements) |
- |
5000 |
|
- |
| Annex M-2(Safety of batteries and their cells) |
- |
5000 |
|
- |
| Cl-5.3(Protection against electrical energy sources) |
- |
15000 |
|
- |
| Annex M-3(Protection circuits for batteries provided within the equipment) |
- |
5000 |
|
- |
| Annex M-4(Additional safeguards for equipment containing a secondary lithium battery) |
- |
20000 |
|
- |
| Annex M-5(Risk of burn due to short-circuit during carrying) |
- |
10000 |
|
- |
| Annex M-6(Safeguards against short-circuits) |
- |
10000 |
|
- |
| Annex M-7(Risk of explosion from lead acid and NiCd batteries) |
- |
10000 |
|
- |
| Annex M-8("Protection against internal ignition from external spark sources of
rechargeable batteries with aqueous electrolyte") |
- |
5000 |
|
- |
| Annex M-9(Preventing electrolyte spillage) |
- |
5000 |
|
- |
| Annex N(Electrochemical potentials (V)) |
- |
5000 |
|
- |
| Annex O(Measurement of creepage distances and clearances) |
- |
5000 |
|
- |
| Annex P-1(General-Safeguards against conductive objects) |
- |
10000 |
|
- |
| Annex P-2(Safeguards against entry or consequences of entry of a foreign object) |
- |
10000 |
|
- |
| Annex P-3(Safeguards against spillage of internal liquids) |
- |
10000 |
|
- |
| Annex P-4(Metallized coatings and adhesives securing parts) |
- |
10000 |
|
- |
| Annex Q-1(Limited power source) |
- |
10000 |
|
- |
| Annex Q-2(Test for external circuits – paired conductor cable) |
- |
10000 |
|
- |
| Annex R(Limited short-circuit test) |
- |
10000 |
|
- |
| Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W) |
- |
15000 |
|
- |
| Annex S-2(Flammability test for fire enclosure and fire barrier integrity) |
- |
15000 |
|
- |
| Annex S-3(Flammability tests for the bottom of a fire enclosure) |
- |
15000 |
|
- |
| Annex S-4(Flammability classification of materials) |
- |
15000 |
|
- |
| Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W) |
- |
15000 |
|
- |
| Annex S-6(Grille covering material, cloth, and reticulated foam) |
- |
15000 |
|
- |
| Annex T-1(General-Mechanical strength tests) |
- |
10000 |
|
- |
| Annex T-2(Steady force test, 10 N) |
- |
10000 |
|
- |
| Annex T-3(Steady force test, 30 N) |
- |
10000 |
|
- |
| Annex T-4(Steady force test, 100 N) |
- |
10000 |
|
- |
| Annex T-5(Steady force test, 250 N) |
- |
10000 |
|
- |
| Annex T-6(Enclosure impact test) |
- |
10000 |
|
- |
| Annex T-7(Drop test) |
- |
10000 |
|
- |
| Annex T-8(Stress relief test) |
- |
15000 |
|
- |
| Annex T-9(Glass impact test) |
- |
10000 |
|
- |
| Annex T-10(Glass fragmentation test) |
- |
10000 |
|
- |
| Annex T-11(Test for telescoping or rod antennas) |
- |
10000 |
|
- |
| Annex U("Mechanical strength of CRTs and protection against the effects
of implosion") |
- |
10000 |
|
- |
| Annex V-1(Accessible parts of equipment) |
- |
10000 |
|
- |
| Annex V-2(Accessible part criterion) |
- |
10000 |
|
- |
| Annex W(Comparison of terms introduced in this document) |
- |
10000 |
|
- |
| Annex X("Alternative method for determining clearances for insulation in
circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)") |
- |
10000 |
|
- |
| Annex Y-1(General- Construction requirements for outdoor enclosures) |
- |
10000 |
|
- |
| Annex Y-3(Resistance to corrosion) |
- |
15000 |
|
- |
| Annex Y-4(Gaskets) |
- |
15000 |
|
- |
| Annex Y-5(Protection of equipment within an outdoor enclosure) |
- |
20000 |
|
- |
| Annex Y-6(Mechanical strength of enclosures) |
- |
10000 |
|
- |
| Cl-8.8(Handle strength) |
- |
10000 |
|
- |
| Annex G-11(Capacitors and RC units) |
- |
10000 |
|
- |
| Annex M-10(Instructions to prevent reasonably foreseeable misuse) |
- |
5000 |
|
- |
| Annex Y-2(Resistance to UV radiation) |
- |
25000 |
|
- |
| Cl-4.1(General- materials, components) |
- |
0 |
|
- |
| Cl-4.2(Energy source classifications) |
- |
0 |
|
- |
| Cl-4.3(Protection against energy sources) |
- |
0 |
|
- |
| Cl-4.4(Safeguards) |
- |
0 |
|
- |
| Cl-4.5(Explosion) |
- |
0 |
|
- |
| Cl-4.6(Fixing of conductors and conductive parts) |
- |
0 |
|
- |
| Cl-4.7(Equipment for direct insertion into mains socket-outlets) |
- |
0 |
|
- |
| Cl-4.8(Equipment containing coin or button cell batteries) |
- |
0 |
|
- |
| Cl-4.9(Likelihood of fire or shock due to entry of conductive objects) |
- |
0 |
|
- |
| Cl-4.10(Components requirements) |
- |
0 |
|
- |
| Cl-5.1(General- Electrically-caused injury) |
- |
0 |
|
- |
| Cl-5.2(Classification and limits of electrical energy sources) |
- |
0 |
|
- |
| Cl-5.4(Insulation materials and requirements) |
- |
0 |
|
- |
| Cl-5.5(Components as safeguards) |
- |
0 |
|
- |
| Cl-5.6(Protective conductor) |
- |
0 |
|
- |
| Cl-5.7(Prospective touch voltage, touch current and protective conductor current) |
- |
0 |
|
- |
| Cl-5.8(Backfeed safeguard in battery backed up supplies) |
- |
0 |
|
- |
| Cl-6.1(General- Electrically-caused fire) |
- |
0 |
|
- |
| Cl-6.2(Classification of power sources and potential ignition sources) |
- |
0 |
|
- |
| Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions) |
- |
0 |
|
- |
| Cl-6.4(Safeguards against fire under single fault conditions) |
- |
0 |
|
- |
| Cl-6.5(Internal and external wiring) |
- |
0 |
|
- |
| Cl-7.1(General- Injury caused by hazardous substances) |
- |
0 |
|
- |
| Cl-7.2(Reduction of exposure to hazardous substances) |
- |
0 |
|
- |
| Cl-7.3(Ozone exposure) |
- |
0 |
|
- |
| Cl-7.4(Use of personal safeguards or personal protective equipment (PPE) |
- |
0 |
|
- |
| Cl-7.5(Use of instructional safeguards and instructions) |
- |
0 |
|
- |
| Cl-8.1(General- Mechanically-caused injury) |
- |
0 |
|
- |
| Cl-8.2(Mechanical energy source classifications) |
- |
0 |
|
- |
| Cl-8.3(Safeguards against mechanical energy sources) |
- |
0 |
|
- |
| Cl-8.4(Safeguards against parts with sharp edges and corners) |
- |
0 |
|
- |
| Cl-8.5(Safeguards against moving parts) |
- |
0 |
|
- |
| Cl-8.6(Stability of equipment) |
- |
0 |
|
- |
| Cl-8.7(Equipment mounted to a wall, ceiling or other structure) |
- |
0 |
|
- |
| Cl-8.9(Wheels or casters attachment requirements) |
- |
0 |
|
- |
| Cl-8.10(Carts, stands, and similar carriers) |
- |
0 |
|
- |
| Cl-8.11(Mounting means for slide-rail mounted equipment (SRME)) |
- |
0 |
|
- |
| Cl-9.1(General-Thermal burn injury) |
- |
0 |
|
- |
| Cl-9.2(Thermal energy source classifications) |
- |
0 |
|
- |
| Cl-9.3(Touch temperature limits) |
- |
0 |
|
- |
| Cl-9.4(Safeguards against thermal energy sources) |
- |
0 |
|
- |
| Cl-9.5(Requirements for safeguards) |
- |
0 |
|
- |
| Cl-9.6(Requirements for wireless power transmitters) |
- |
0 |
|
- |
| Cl-10.1(General-Radiation) |
- |
0 |
|
- |
| Cl-10.2(Radiation energy source classifications) |
- |
0 |
|
- |
| Cl-10.3(Safeguards against laser radiation) |
- |
0 |
|
- |
| Cl-10.4("Safeguards against optical radiation from lamps and lamp systems
(including LED types)") |
- |
0 |
|
- |
| Cl-10.5(Safeguards against X-radiation) |
- |
0 |
|
- |
| Cl-10.6(Safeguards against acoustic energy sources) |
- |
0 |
|
- |
| Annex A(Examples of equipment within the scope of this document) |
- |
0 |
|
- |
| Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests) |
- |
0 |
|
- |
| Annex B-2(Normal operating conditions) |
- |
0 |
|
- |
| Annex B-3(Simulated abnormal operating conditions) |
- |
0 |
|
- |
| Annex B-4(Simulated single fault conditions) |
- |
0 |
|
- |
| Annex D-1(Impulse test generators) |
- |
0 |
|
- |
| Annex D-2(Antenna interface test generator) |
- |
0 |
|
- |
| Annex D-3(Electronic pulse generator) |
- |
0 |
|
- |
| Annex E-1(Electrical energy source classification for audio signals) |
- |
0 |
|
- |
| Annex E-2(Audio signals used during test) |
- |
0 |
|
- |
| Annex E-3(Operating conditions of equipment containing an audio amplifier) |
- |
0 |
|
- |
| Annex F-1(General-Equipment markings, instructions, and instructional safeguards) |
- |
0 |
|
- |
| Annex F-2(Letter symbols and graphical symbols) |
- |
0 |
|
- |
| Annex F-3(Equipment markings) |
- |
0 |
|
- |
| Annex F-4(Instructions) |
- |
0 |
|
- |
| Annex F-5(Instructional safeguards) |
- |
0 |
|
- |
| Annex G-1(Switches) |
- |
0 |
|
- |
| Annex G-2(Relays) |
- |
0 |
|
- |
| Annex G-3(Protective devices) |
- |
0 |
|
- |
| Annex G-4(Connectors) |
- |
0 |
|
- |
| Annex G-5(Wound components) |
- |
0 |
|
- |
| Annex G-6(Wire insulation) |
- |
0 |
|
- |
| Annex G-7(Mains power supply cords and interconnection cables) |
- |
0 |
|
- |
| Annex G-8(Varistors) |
- |
0 |
|
- |
| Annex G-9(Integrated circuit (IC) current limiters) |
- |
0 |
|
- |
| Annex G-10(Resistors) |
- |
0 |
|
- |
| Annex G-12(Optocouplers) |
- |
0 |
|
- |
| Annex G-13(Printed boards) |
- |
0 |
|
- |
| Annex G-14(Coatings on component terminals) |
- |
0 |
|
- |
| Annex G-15(Pressurized liquid filled components or LFC assemblies) |
- |
0 |
|
- |
| Annex G-16(IC that includes a capacitor discharge function (ICX)) |
- |
0 |
|
- |
| Annex H-1(General- Criteria for telephone ringing signals) |
- |
0 |
|
- |
| Annex H-2(Method A) |
- |
0 |
|
- |
| Annex H-3(Method B) |
- |
0 |
|
- |
| Annex I(Overvoltage categories (see IEC 60364-4-44)) |
- |
0 |
|
- |
| Annex J-1(General-Insulated winding wires for use without interleaved insulation) |
- |
0 |
|
- |
| Annex J-2(Type tests) |
- |
0 |
|
- |
| Annex J-3(Testing during manufacturing) |
- |
0 |
|
- |
| Annex K-1(General- Safety interlocks) |
- |
0 |
|
- |
| Annex K-2(Components of the safety interlock safeguard mechanism) |
- |
0 |
|
- |
| Annex K-3(Inadvertent change of operating mode) |
- |
0 |
|
- |
| Annex K-4(Interlock safeguard override) |
- |
0 |
|
- |
| Annex K-5(Fail-safe) |
- |
0 |
|
- |
| Annex K-6(Mechanically operated safety interlocks) |
- |
0 |
|
- |
| Annex K-7(Interlock circuit isolation) |
- |
0 |
|
- |
| Annex L-1(General requirements) |
- |
0 |
|
- |
| Annex L-2(Permanently connected equipment) |
- |
0 |
|
- |
| Annex L-3() |
- |
0 |
|
- |
| Annex L-4(Single-phase equipment) |
- |
0 |
|
- |
| Annex L-5(Three-phase equipment) |
- |
0 |
|
- |
| Annex L-6(Switches as disconnect devices) |
- |
0 |
|
- |
| Annex L-7(Plugs as disconnect devices) |
- |
0 |
|
- |
| Annex L-8(Multiple power sources) |
- |
0 |
|
- |
| Annex L-9(Compliance criteria) |
- |
0 |
|
- |
| Annex M-1(General requirements) |
- |
0 |
|
- |
| Annex M-2(Safety of batteries and their cells) |
- |
0 |
|
- |
| Cl-5.3(Protection against electrical energy sources) |
- |
0 |
|
- |
| Annex M-3(Protection circuits for batteries provided within the equipment) |
- |
0 |
|
- |
| Annex M-4(Additional safeguards for equipment containing a secondary lithium battery) |
- |
0 |
|
- |
| Annex M-5(Risk of burn due to short-circuit during carrying) |
- |
0 |
|
- |
| Annex M-6(Safeguards against short-circuits) |
- |
0 |
|
- |
| Annex M-7(Risk of explosion from lead acid and NiCd batteries) |
- |
0 |
|
- |
| Annex M-8("Protection against internal ignition from external spark sources of
rechargeable batteries with aqueous electrolyte") |
- |
0 |
|
- |
| Annex M-9(Preventing electrolyte spillage) |
- |
0 |
|
- |
| Annex N(Electrochemical potentials (V)) |
- |
0 |
|
- |
| Annex O(Measurement of creepage distances and clearances) |
- |
0 |
|
- |
| Annex P-1(General-Safeguards against conductive objects) |
- |
0 |
|
- |
| Annex P-2(Safeguards against entry or consequences of entry of a foreign object) |
- |
0 |
|
- |
| Annex P-3(Safeguards against spillage of internal liquids) |
- |
0 |
|
- |
| Annex P-4(Metallized coatings and adhesives securing parts) |
- |
0 |
|
- |
| Annex Q-1(Limited power source) |
- |
0 |
|
- |
| Annex Q-2(Test for external circuits – paired conductor cable) |
- |
0 |
|
- |
| Annex R(Limited short-circuit test) |
- |
0 |
|
- |
| Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W) |
- |
0 |
|
- |
| Annex S-2(Flammability test for fire enclosure and fire barrier integrity) |
- |
0 |
|
- |
| Annex S-3(Flammability tests for the bottom of a fire enclosure) |
- |
0 |
|
- |
| Annex S-4(Flammability classification of materials) |
- |
0 |
|
- |
| Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W) |
- |
0 |
|
- |
| Annex S-6(Grille covering material, cloth, and reticulated foam) |
- |
0 |
|
- |
| Annex T-1(General-Mechanical strength tests) |
- |
0 |
|
- |
| Annex T-2(Steady force test, 10 N) |
- |
0 |
|
- |
| Annex T-3(Steady force test, 30 N) |
- |
0 |
|
- |
| Annex T-4(Steady force test, 100 N) |
- |
0 |
|
- |
| Annex T-5(Steady force test, 250 N) |
- |
0 |
|
- |
| Annex T-6(Enclosure impact test) |
- |
0 |
|
- |
| Annex T-7(Drop test) |
- |
0 |
|
- |
| Annex T-8(Stress relief test) |
- |
0 |
|
- |
| Annex T-9(Glass impact test) |
- |
0 |
|
- |
| Annex T-10(Glass fragmentation test) |
- |
0 |
|
- |
| Annex T-11(Test for telescoping or rod antennas) |
- |
0 |
|
- |
| Annex U("Mechanical strength of CRTs and protection against the effects
of implosion") |
- |
0 |
|
- |
| Annex V-1(Accessible parts of equipment) |
- |
0 |
|
- |
| Annex V-2(Accessible part criterion) |
- |
0 |
|
- |
| Annex W(Comparison of terms introduced in this document) |
- |
0 |
|
- |
| Annex X("Alternative method for determining clearances for insulation in
circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)") |
- |
0 |
|
- |
| Annex Y-1(General- Construction requirements for outdoor enclosures) |
- |
0 |
|
- |
| Annex Y-3(Resistance to corrosion) |
- |
0 |
|
- |
| Annex Y-4(Gaskets) |
- |
0 |
|
- |
| Annex Y-5(Protection of equipment within an outdoor enclosure) |
- |
0 |
|
- |
| Annex Y-6(Mechanical strength of enclosures) |
- |
0 |
|
- |
| Cl-8.8(Handle strength) |
- |
0 |
|
- |
| Annex G-11(Capacitors and RC units) |
- |
0 |
|
- |
| Annex M-10(Instructions to prevent reasonably foreseeable misuse) |
- |
0 |
|
- |
| Annex Y-2(Resistance to UV radiation) |
- |
0 |
|
- |
|
19 Sep, 2028 |
-
"1 Annex C-1 (Protection of materials in equipment from UV radiation) Protection of materials in equipment from UV radiation Test facility not available
2 Annex C-2 (UV light conditioning test) UV light conditioning test Test facility not available" |
| 2229 |
ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD
| 8180426
| IS 14772 (2020) |
Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations — General Requirements ( First Revision ) |
---- |
18800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1(Nature of material) |
- |
200 |
|
- |
| 7.2(Type of installation) |
- |
200 |
|
- |
| 7.3(Types of inlets) |
- |
200 |
|
- |
| 7.4(Clamping means) |
- |
200 |
|
- |
| 7.5(Minimum temperature during installation) |
- |
200 |
|
- |
| 7.6, 7.7, 7.8(The degree of ingress protection) |
- |
200 |
|
- |
| 7.9(The provision for fixing accessories to the boxes ) |
- |
200 |
|
- |
| 7.1(The method of fixing the terminals) |
- |
200 |
|
- |
| 8.1(marking) |
- |
500 |
|
- |
| 8.2(By Inspection and The marking is rubbed by hand 15s width a piece of
cloth soaked with water and again for 15s with a piece of cloth soaked with petroleum spirit.) |
- |
500 |
|
- |
| 8.3(BIS Certification Marking) |
- |
200 |
|
- |
| 9.0(Dimensions) |
- |
500 |
|
- |
| 10.0(Protection against electric shock) |
- |
1000 |
|
- |
| 11.0(PROVISION FOR EARTHING) |
- |
1000 |
|
- |
| 12.0(Constructions) |
- |
500 |
|
- |
| 13.0(Resistance to ageing) |
- |
1000 |
|
- |
| 14.0(insultation resistance) |
- |
1000 |
|
- |
| 14.0(electric strength) |
- |
1000 |
|
- |
| 15.0(Mechanical strength) |
- |
1000 |
|
- |
| 16.0(resistance to heat) |
- |
500 |
|
- |
| 17.0(creepage distance) |
- |
500 |
|
- |
| 17.0(clearances) |
- |
500 |
|
- |
| 17.0(distance through seating compund) |
- |
1000 |
|
- |
| 18.0(Resistance to insulating material to abnormal heat and fire) |
- |
1000 |
|
- |
| 19.0(Resistance to tracking) |
- |
1000 |
|
- |
| 20.0(Resistance to corrosion) |
- |
500 |
|
- |
|
03 Oct, 2027 |
-
Included w.e.f 20.05.2026 |
| 2230 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 13487 (2024) |
Irrigation Equipment — Emitters — Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-7.1 (Construction and Workmanship) |
- |
|
|
|
| Cl-7.2 (Flow Paths in Emitter) |
- |
|
|
|
| Cl-7.3 (Resistance to Hydrostatic Pressure) |
- |
|
|
|
| Cl-7.4 (Emitter Pull-Out) |
- |
|
|
|
| Cl-8.1.2 (Emission Rate as Function of Inlet Pressure) |
- |
|
|
|
| Cl-8.1.3 (Determination of Emitter Exponent) |
- |
|
|
|
| Cl-9 (Marking) |
- |
|
|
|
|
- |
-
- |
| 2231 |
RTC cum Technology Back up Unit for Solar Thermal Devices (RTC), Pune
| 7165924
| IS 12933 (Part 2) (2025) |
Solar Flat Plate Collector - Specification Part 2 Components (Third Revision) |
Designed for Normal Fluid Temp. less than 100 Degree C |
9000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(Material (cover plate)) |
- |
1000 |
|
- |
| Cl-5.1(Transmittance Test) |
- |
1000 |
|
- |
| Cl-5.1.2(cover glass of the solar collector) |
- |
0 |
|
- |
| Cl-5.1.3(Global solar radiation) |
- |
0 |
|
- |
| Cl-6(Material (Collector Box)) |
- |
0 |
|
- |
| Cl-6.1 (a)(Aluminum alloy) |
- |
0 |
|
- |
| Cl-6.1 (b)(Fibre glass) |
- |
0 |
|
- |
| Cl-6.2(Minimum thickness) |
- |
0 |
|
- |
| Cl-7(Workmanship and Finish) |
- |
1000 |
|
- |
| Cl-7.3(Resistance to Abrasion) |
- |
0 |
|
- |
| Cl-8(Fabrication) |
- |
1000 |
|
- |
| Cl-9(Absorber) |
- |
0 |
|
- |
| Cl-9.1.4(Temperature Test) |
- |
1000 |
|
- |
| Cl-9.2.1(Static Pressure Leakage Test) |
- |
1000 |
|
- |
| Cl-9.2.2(Bonding between Riser and Sheet) |
- |
1000 |
|
- |
| Cl-10(Back and Side Insulation) |
- |
1000 |
|
- |
| Cl-11(Material (Gaskets and Grommets)) |
- |
1000 |
|
- |
| Cl-12.1.1(Thermal Shock Test) |
- |
1000 |
|
- |
| Cl-6.1 (c)(CRCA steel) |
- |
0 |
|
- |
| Cl-6.1 (d)(Galvanized steel sheets) |
- |
0 |
|
- |
| Cl-6.1 (e)(continuously pre-painted galvanized steel) |
- |
0 |
|
- |
| Cl-6.1 (f)(HRC steel sheets) |
- |
0 |
|
- |
| Cl-6.1 (d)(continuously pre-painted galvanized steel) |
- |
0 |
|
- |
| Cl-6.1 (e)(HRC steel sheets) |
- |
0 |
|
- |
|
26 Oct, 2026 |
-
Included w.e.f. 22.01.2026 |
| 2232 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 1848 : Part 1 (2018) |
Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision) |
- |
19800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.2(Substance, Ref IS 1763) |
- |
19800 |
|
For complete testing |
| Cl. 4.4(Size and tolerance on size) |
- |
19800 |
|
For complete testing |
| Cl. 4.5(pH) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Brightness ISO, Account book) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Opacity, Account book) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(One minute cobb test, Account book) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Gloss, Account book) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Wax pick, Account book) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Smoothness(Bendtsen),Account book) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Brightness ISO, Azure laid) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Opacity,Azure laid) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(One minute cobb test, Azure laid) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Gloss, Azure laid) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Wax pick, Azure laid) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Smoothness(Bendtsen),Azure laid) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Brightness ISO, Bond) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Opacity, Bond) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(One minute cobb test, Bond) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Gloss, Bond) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Wax pick, Bond) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Smoothness(Bendtsen),Bond) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Brightness ISO, Cream laid and cream wove/printing white/printing coloured/printing offset) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Opacity, Cream laid and cream wove/printing white/printing coloured/printing offset) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(One minute cobb test, Cream laid and cream wove/printing white/printing coloured/printing offset) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Gloss, Cream laid and cream wove/printing white/printing coloured/printing offset) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Wax pick, Cream laid and cream wove/printing white/printing coloured/printing offset) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Smoothness bendtsen, Cream laid and cream wove/printing white/printing coloured/printing offset) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Brightness ISO, Printing Maplitho) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Opacity, Printing Maplitho) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(One minute cobb test, Printing Maplitho) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Gloss, Printing Maplitho) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Wax pick, Printing Maplitho) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Smoothness bendtsen, Printing Maplitho) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Brightness ISO, Printing White Super Calendered) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Opacity, Printing White Super Calendered) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(One minute cobb test, Printing White Super Calendered) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Gloss, Printing White Super Calendered) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Wax pick, Printing White Super Calendered) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Smoothness bendtsen, Printing White Super Calendered) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Typewriting-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tensile index, Typewriting-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Brightness ISO, Typewriting) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Opacity, Typewriting) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(One minute cobb test, Typewriting) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Gloss, Typewriting) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Wax pick, Typewriting) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Smoothness bendtsen, Typewriting) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-MD) |
- |
19800 |
|
For complete testing |
| Cl.4.2(Substance, Ref IS 1763) |
- |
19800 |
|
For complete testing |
| Cl. 4.4(Size and tolerance on size) |
- |
19800 |
|
For complete testing |
| Cl. 4.5(pH) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Brightness ISO, Account book) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Opacity, Account book) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(One minute cobb test, Account book) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Gloss, Account book) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Wax pick, Account book) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Smoothness(Bendtsen),Account book) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Brightness ISO, Azure laid) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Opacity,Azure laid) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(One minute cobb test, Azure laid) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Gloss, Azure laid) |
- |
19799.99 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Wax pick, Azure laid) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Smoothness(Bendtsen),Azure laid) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Brightness ISO, Bond) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Opacity, Bond) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(One minute cobb test, Bond) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Gloss, Bond) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Wax pick, Bond) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Smoothness(Bendtsen),Bond) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Brightness ISO, Cream laid and cream wove/printing white/printing coloured/printing offset) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Opacity, Cream laid and cream wove/printing white/printing coloured/printing offset) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(One minute cobb test, Cream laid and cream wove/printing white/printing coloured/printing offset) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Gloss, Cream laid and cream wove/printing white/printing coloured/printing offset) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Wax pick, Cream laid and cream wove/printing white/printing coloured/printing offset) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Smoothness bendtsen, Cream laid and cream wove/printing white/printing coloured/printing offset) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Brightness ISO, Printing Maplitho) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Opacity, Printing Maplitho) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(One minute cobb test, Printing Maplitho) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Gloss, Printing Maplitho) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Wax pick, Printing Maplitho) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Smoothness bendtsen, Printing Maplitho) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Brightness ISO, Printing White Super Calendered) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Opacity, Printing White Super Calendered) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(One minute cobb test, Printing White Super Calendered) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-CD) |
- |
19799.99 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Gloss, Printing White Super Calendered) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Wax pick, Printing White Super Calendered) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Smoothness bendtsen, Printing White Super Calendered) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Typewriting-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tensile index, Typewriting-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Brightness ISO, Typewriting) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Opacity, Typewriting) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(One minute cobb test, Typewriting) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-MD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Gloss, Typewriting) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Wax pick, Typewriting) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Smoothness bendtsen, Typewriting) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-CD) |
- |
19800 |
|
For complete testing |
| Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-MD) |
- |
19800 |
|
For complete testing |
| Cl.4.1(Description) |
- |
19800 |
|
For complete testing |
| Cl.4.1(Mechanical pulp) |
- |
19800 |
|
For complete testing |
| Cl.4.2(Substance) |
- |
19800 |
|
For complete testing |
| Cl.4.2.1(Tolerances on nominal substance) |
- |
19800 |
|
For complete testing |
| Cl.4.3(Thickness) |
- |
19800 |
|
For complete testing |
| Cl.4.4(Sizes and tolerances on sizes) |
- |
19800 |
|
For complete testing |
| Cl.4.5(pH) |
- |
19800 |
|
For complete testing |
| Table-1(i)(Tensile index, CD) |
- |
19800 |
|
For complete testing |
| Table-1(i)(Tensile index, MD) |
- |
19800 |
|
For complete testing |
| Table-1(ii)(Brightness, ISO) |
- |
19799.98 |
|
For complete testing |
| Table-1(iii)(Opacity) |
- |
19800 |
|
For complete testing |
| Table-1(iv)(One minute cobb test) |
- |
19800 |
|
For complete testing |
| Table-1(v)(No of double fold, CD) |
- |
19800 |
|
For complete testing |
| Table-1(v)(No of double fold, MD) |
- |
19800 |
|
For complete testing |
| Table-1(vi)(Gloss) |
- |
19800 |
|
For complete testing |
| Table-1(vii)(Wax pick) |
- |
19800 |
|
For complete testing |
| Table-1(viii)(Smoothness (Bendtsen)) |
- |
19800 |
|
For complete testing |
| Table-1(ix)(Tear index, CD) |
- |
19800 |
|
For complete testing |
| Table-1(ix)(Tear index, MD) |
- |
19800 |
|
For complete testing |
|
- |
-
Included w.e.f. 02.03.2026 |
| 2233 |
Gravitas Laboratories Private Limited, Greater Noida
| 8182606
| IS 277 (2018) |
Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision) |
All thickness |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8.1(UTM) |
- |
6000 |
|
- |
| Cl 8.2(Press) |
- |
6000 |
|
- |
| Cl 10(Galvanising Test) |
- |
6000 |
|
- |
| Cl 12(Workmanship) |
- |
6000 |
|
- |
| Cl 13(Weight) |
- |
6000 |
|
- |
| Cl 14(Length, Width & Thickness) |
- |
6000 |
|
- |
| Cl 8.1(UTM) |
- |
6000 |
|
- |
| Cl 8.2(Press) |
- |
6000 |
|
- |
| Cl 10(Galvanising Test) |
- |
6000 |
|
- |
| Cl 13(Weight) |
- |
6000 |
|
- |
| Cl 14(Length, Width & Thickness) |
- |
6000 |
|
- |
| Cl 8.1(UTM) |
- |
6000 |
|
- |
| Cl 8.2(Press) |
- |
6000 |
|
- |
| Cl 10(Galvanising Test) |
- |
6000 |
|
- |
| Cl 12(Workmanship) |
- |
6000 |
|
- |
| Cl 13(Weight) |
- |
6000 |
|
- |
| Cl 14(Length, Width & Thickness) |
- |
6000 |
|
- |
| 7.4(Mass of Coating: Single Spot Test) |
- |
6000 |
|
- |
| 7.4(Mass of Coating: Triple Spot Test) |
- |
6000 |
|
- |
| 7.4(Mass of Coating: Single Spot Test) |
- |
6000 |
|
- |
| 7.4(Mass of Coating: Triple Spot Test) |
- |
6000 |
|
- |
| 7.4(Mass of Coating: Single Spot Test) |
- |
6000 |
|
- |
| 7.4(Mass of Coating: Triple Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Single Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Triple Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Single Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Triple Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Single Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Triple Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Single Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Triple Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Single Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Triple Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Single Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Triple Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Single Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Triple Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Single Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Triple Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Single Spot Test) |
- |
6000 |
|
- |
| 7.1 & 10.2(Mass of Coating: Triple Spot Test) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(copper) |
- |
6000 |
|
- |
| 5.1(nitrogen) |
- |
6000 |
|
- |
| 5.1(nitrogen) |
- |
6000 |
|
- |
| 5.1(micro alloy) |
- |
6000 |
|
- |
| 5.1(micro alloy) |
- |
6000 |
|
- |
| 5.1(aluminium) |
- |
6000 |
|
- |
| 5.1(silicon ) |
- |
6000 |
|
- |
| 5.1(silicon ) |
- |
6000 |
|
- |
| 5.1(aluminium) |
- |
6000 |
|
- |
| 5.1(manganese) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(sulphur) |
- |
6000 |
|
- |
| 5.1(carbon) |
- |
6000 |
|
- |
| 5.1(manganese) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(sulphur) |
- |
6000 |
|
- |
| 5.1(carbon) |
- |
6000 |
|
- |
| 5.1(manganese) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(sulphur) |
- |
6000 |
|
- |
| 5.1(carbon) |
- |
6000 |
|
- |
| 5.1(manganese) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(sulphur) |
- |
6000 |
|
- |
| 5.1(carbon) |
- |
6000 |
|
- |
| 5.1(manganese) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(sulphur) |
- |
6000 |
|
- |
| 5.1(carbon) |
- |
6000 |
|
- |
| 5.1(manganese) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(sulphur) |
- |
6000 |
|
- |
| 5.1(carbon) |
- |
6000 |
|
- |
| 5.1(manganese) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(sulphur) |
- |
6000 |
|
- |
| 5.1(carbon) |
- |
6000 |
|
- |
| 5.1(manganese) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(sulphur) |
- |
6000 |
|
- |
| 5.1(carbon) |
- |
6000 |
|
- |
| 5.1(Titanium) |
- |
6000 |
|
- |
| 5.1(manganese) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(sulphur) |
- |
6000 |
|
- |
| 5.1(carbon) |
- |
6000 |
|
- |
| 5.1(manganese) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(sulphur) |
- |
6000 |
|
- |
| 5.1(carbon) |
- |
6000 |
|
- |
| 5.1(manganese) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(sulphur) |
- |
6000 |
|
- |
| 5.1(carbon) |
- |
6000 |
|
- |
| 5.1(manganese) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(sulphur) |
- |
6000 |
|
- |
| 5.1(carbon) |
- |
6000 |
|
- |
| 5.1(manganese) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(sulphur) |
- |
6000 |
|
- |
| 5.1(carbon) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(sulphur) |
- |
6000 |
|
- |
| 5.1(carbon) |
- |
6000 |
|
- |
| 5.1(manganese) |
- |
6000 |
|
- |
| 5.1(phosphorus) |
- |
6000 |
|
- |
| 5.1(carbon) |
- |
6000 |
|
- |
| Cl. 17(Marking ) |
- |
0 |
|
- |
| Cl. 14 & Cl. 15(Pitch of corrugation (average of 4)) |
- |
6000 |
|
- |
| Cl. 14 & Cl. 15(Depth of corrugation (average of 4)) |
- |
6000 |
|
- |
| Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation)) |
- |
6000 |
|
- |
| Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal)) |
- |
6000 |
|
- |
| Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness)) |
- |
6000 |
|
- |
| Cl. 14 (Cl. 14 & Cl 15 (Width)) |
- |
6000 |
|
- |
| Cl. 14 (Cl. 14 & Cl 15 (Length)) |
- |
6000 |
|
- |
| Cl.12(Freedom from defects) |
- |
6000 |
|
- |
| Cl. 8.1 (Cl. 8.1 (Percentage Elongation )) |
- |
6000 |
|
- |
| Cl. 8.1 (Cl. 8.1 (Yield Stress)) |
- |
6000 |
|
- |
| Cl. 8.1 (Cl. 8.1 (Tensile Strength)) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-6, For reinforced steel(P) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-5, For Microalloying elements(Nb+V+Ti+B) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-5, For Microalloying elements(B) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-5, For Microalloying elements(Ti) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-5, For Microalloying elements(V) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-5, For Microalloying elements(Nb) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-4, For Cu bearing quality(Cu) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-2, When Al-Si killed(Si) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-2, When Al-Si killed(Al) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-2, When Si killed(Si) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-2, When Al killed(Al) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-3(N2) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 550(P) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 550(S) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 550(Mn) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 550(C) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-3(N2) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 450(P) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 450(S) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 450(Mn) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 450(C) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-3(N2) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 350 class-2(P) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 350 class-2(S) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 350 class-2(Mn) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 350 class-2(C) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-3(N2) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 350 class-1(P) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 350 class-1(S) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 350 class-1(Mn) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 350 class-1(C) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-3(N2) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 300(P) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 300(S) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 300(Mn) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP 300(C) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-3(N2) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP275(P) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP275(S) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP275(Mn) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP275(C) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-3(N2) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP250(P) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP250(S) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP250(Mn) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP250(C) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-3(N2) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP230(P) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP230(S) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP230(Mn) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP230(C) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-3(N2) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPIF(P) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPIF(S) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPIF(Mn) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPIF(C) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-3(N2) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPED(P) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPED(S) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPED(Mn) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPED(C) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-3(N2) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPD(P) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPD(S) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPD(Mn) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPD(C) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-3(N2) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPL(P) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPL(S) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPL(Mn) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPL(C) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-3(N2) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GC(P) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GC(S) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GC(Mn) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GC(C) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-3(N2) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPH (P) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPH (S) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPH (Mn) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GPH (C) |
- |
6000 |
|
- |
| cl 5.1, T-1, Note-3(N2) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP (P) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP (S) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP (Mn) |
- |
6000 |
|
- |
| cl 5.1, T-1, designation For GP (C) |
- |
6000 |
|
- |
| Cl.15.1.3.1(Overall width after corrugation) |
- |
6000 |
|
- |
| Cl.15.1.3.1(Overall width before corrugation) |
- |
6000 |
|
- |
| Cl. 9(Surface roughness) |
- |
6000 |
|
- |
| Cl 14(Length, Width & Thickness) |
- |
6000 |
|
- |
| Cl 13(Weight) |
- |
6000 |
|
- |
| Cl 12(Workmanship) |
- |
6000 |
|
- |
| Cl 10(Galvanising Test) |
- |
6000 |
|
- |
| Cl 8.2(Press) |
- |
6000 |
|
- |
| Cl 8.1(UTM) |
- |
6000 |
|
- |
| Cl 8.1(UTM) |
- |
6000 |
|
- |
| Cl 8.2(Press) |
- |
6000 |
|
- |
| Cl 10(Galvanising Test) |
- |
6000 |
|
- |
| Cl 12(Workmanship) |
- |
6000 |
|
- |
| Cl 13(Weight) |
- |
6000 |
|
- |
| Cl 14.1(Thickness of plain sheet ( average of 8)) |
- |
6000 |
|
- |
| 5(Titanium as Ti) |
- |
6000 |
|
- |
| 5(Niobium as Nb) |
- |
6000 |
|
- |
| 5(Boron as B) |
- |
6000 |
|
- |
| 5(Micro Alloying Elements (Nb+V+Ti + B)) |
- |
6000 |
|
- |
| 5(Copper as Cu) |
- |
6000 |
|
- |
| 6(Tensile Strength-IS:1608(P1)) |
- |
6000 |
|
- |
| 6(Yield Strength-IS:1608(P1)) |
- |
6000 |
|
- |
| 6(Elongation-IS:1608(P1)) |
- |
6000 |
|
- |
| 7.1(Zinc Coating Conformation) |
- |
6000 |
|
- |
| 7.3(X-Ray fluorescence method) |
- |
6000 |
|
- |
| 7.6(Coating finish type) |
- |
6000 |
|
- |
| 7.7(Surface treatment) |
- |
0 |
|
- |
| 8.3(Bend test miniral diameter) |
- |
6000 |
|
- |
| Cl. 5.1(Carbon) |
- |
6000 |
|
- |
| Cl. 5.1(Sulphur) |
- |
6000 |
|
- |
| Cl. 5.1(Manganese) |
- |
6000 |
|
- |
| Cl. 5.1(Silicon) |
- |
6000 |
|
- |
| Cl. 5.1(Titanium) |
- |
6000 |
|
- |
| Cl. 5.1(Nitrogen) |
- |
6000 |
|
- |
| Cl-5.1(Aluminium) |
- |
6000 |
|
- |
| Cl. 5.1(Copper) |
- |
6000 |
|
- |
| Cl. 5.1(Boron) |
- |
6000 |
|
- |
| Cl. 5.1(Niobium) |
- |
6000 |
|
- |
| Cl. 5.1(Vanadium) |
- |
6000 |
|
- |
| Cl. 5.1(Ti+Nb+V+B) |
- |
6000 |
|
- |
| CL 15.1.2(Depth of corrugation (average of 4)) |
- |
6000 |
|
- |
| CL 15.1.2(Pitch of corrugation (average of 4)) |
- |
6000 |
|
- |
| 5.1(manganese) |
- |
6000 |
|
- |
| 5.1(sulphur) |
- |
6000 |
|
- |
| Cl. 5.1(Phosphorous) |
- |
6000 |
|
- |
| Cl 12(Workmanship) |
- |
6000 |
|
- |
| Cl 8.1(UTM) |
- |
0 |
|
- |
| Cl 8.2(Press) |
- |
0 |
|
- |
| Cl 10(Galvanising Test) |
- |
0 |
|
- |
| Cl 12(Workmanship) |
- |
0 |
|
- |
| Cl 13(Weight) |
- |
0 |
|
- |
| Cl 14(Length, Width & Thickness) |
- |
0 |
|
- |
| Cl 8.1(UTM) |
- |
0 |
|
- |
| Cl 8.2(Press) |
- |
0 |
|
- |
| Cl 10(Galvanising Test) |
- |
0 |
|
- |
| Cl 13(Weight) |
- |
0 |
|
- |
| Cl 14(Length, Width & Thickness) |
- |
0 |
|
- |
| Cl 8.1(UTM) |
- |
0 |
|
- |
| Cl 8.2(Press) |
- |
0 |
|
- |
| Cl 10(Galvanising Test) |
- |
0 |
|
- |
| Cl 12(Workmanship) |
- |
0 |
|
- |
| Cl 13(Weight) |
- |
0 |
|
- |
| Cl 14(Length, Width & Thickness) |
- |
0 |
|
- |
| Cl. 14 & Cl. 15(Pitch of corrugation (average of 4)) |
- |
0 |
|
- |
| Cl. 14 & Cl. 15(Depth of corrugation (average of 4)) |
- |
0 |
|
- |
| Cl.15.1.3.1(Overall width after corrugation) |
- |
0 |
|
- |
| Cl.15.1.3.1(Overall width before corrugation) |
- |
0 |
|
- |
| Cl. 9(Surface roughness) |
- |
0 |
|
- |
| Cl 14(Length, Width & Thickness) |
- |
0 |
|
- |
| Cl 13(Weight) |
- |
0 |
|
- |
| Cl 12(Workmanship) |
- |
0 |
|
- |
| Cl 10(Galvanising Test) |
- |
0 |
|
- |
| Cl 8.2(Press) |
- |
0 |
|
- |
| Cl 8.1(UTM) |
- |
0 |
|
- |
| Cl 8.1(UTM) |
- |
0 |
|
- |
| Cl 8.2(Press) |
- |
0 |
|
- |
| Cl 10(Galvanising Test) |
- |
0 |
|
- |
| Cl 12(Workmanship) |
- |
0 |
|
- |
| Cl 13(Weight) |
- |
0 |
|
- |
| Cl 14.1(Thickness of plain sheet ( average of 8)) |
- |
0 |
|
- |
| 5(Titanium as Ti) |
- |
0 |
|
- |
| 5(Niobium as Nb) |
- |
0 |
|
- |
| 5(Boron as B) |
- |
0 |
|
- |
| 5(Micro Alloying Elements (Nb+V+Ti + B)) |
- |
0 |
|
- |
| 5(Copper as Cu) |
- |
0 |
|
- |
| 6(Tensile Strength-IS:1608(P1)) |
- |
0 |
|
- |
| 6(Yield Strength-IS:1608(P1)) |
- |
0 |
|
- |
| 6(Elongation-IS:1608(P1)) |
- |
0 |
|
- |
| 7.1(Zinc Coating Conformation) |
- |
0 |
|
- |
| 7.3(X-Ray fluorescence method) |
- |
0 |
|
- |
| 7.6(Coating finish type) |
- |
0 |
|
- |
| 7.7(Surface treatment) |
- |
0 |
|
- |
| 8.3(Bend test miniral diameter) |
- |
0 |
|
- |
| Cl. 5.1(Carbon) |
- |
0 |
|
- |
| Cl. 5.1(Sulphur) |
- |
0 |
|
- |
| Cl. 5.1(Manganese) |
- |
0 |
|
- |
| Cl. 5.1(Silicon) |
- |
0 |
|
- |
| Cl. 5.1(Titanium) |
- |
0 |
|
- |
| Cl. 5.1(Nitrogen) |
- |
0 |
|
- |
| Cl-5.1(Aluminium) |
- |
0 |
|
- |
| Cl. 5.1(Copper) |
- |
0 |
|
- |
| Cl. 5.1(Boron) |
- |
0 |
|
- |
| Cl. 5.1(Niobium) |
- |
0 |
|
- |
| Cl. 5.1(Vanadium) |
- |
0 |
|
- |
| Cl. 5.1(Ti+Nb+V+B) |
- |
0 |
|
- |
| CL 15.1.2(Depth of corrugation (average of 4)) |
- |
0 |
|
- |
| CL 15.1.2(Pitch of corrugation (average of 4)) |
- |
0 |
|
- |
| Cl. 5.1(Phosphorous) |
- |
0 |
|
- |
| Cl 12(Workmanship) |
- |
0 |
|
- |
|
- |
-
Included w.e.f 19.02.2026 |
| 2234 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 4003 : Part 1 (2024) |
Pipe Wrenches - Specification Part 1 General Purpose(Second revision) |
- |
15500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause. 4.0(Dimensions) |
- |
4750 |
|
For dimensional and qualitative tests |
| Clause.5.0(Carbon) |
- |
2500 |
|
For Complete chemical tests |
| Clause.5.0(Sulphur) |
- |
2500 |
|
For Complete chemical tests |
| Clause.5.0(Phosphorus) |
- |
2500 |
|
For Complete chemical tests |
| Clause.5.0(Niobium) |
- |
2500 |
|
For Complete chemical tests |
| Clause.5.0(Vanadium) |
- |
2500 |
|
For Complete chemical tests |
| Clause.5.0(Nickel) |
- |
2500 |
|
For Complete chemical tests |
| Clause.5.0(Molybdenum) |
- |
2500 |
|
For Complete chemical tests |
| Clause.5.0(Chromium) |
- |
2500 |
|
For Complete chemical tests |
| Clause.5.0(Silicon) |
- |
2500 |
|
For Complete chemical tests |
| Clause.5.0(Manganese) |
- |
2500 |
|
For Complete chemical tests |
| Clause.6.0(Hardness) |
- |
750 |
|
For hardness testing |
| Clause.7.0(Manufacture) |
- |
4750 |
|
For dimensional and qualitative tests |
| Clause.7.1(Handle) |
- |
4750 |
|
For dimensional and qualitative tests |
| Clause.7.2(Movable Jaws) |
- |
4750 |
|
For dimensional and qualitative tests |
| Clause.7.3(Adjusting Nut) |
- |
4750 |
|
For dimensional and qualitative tests |
| Clause.7.4(Frame) |
- |
4750 |
|
For dimensional and qualitative tests |
| Clause.7.5(Hinge Pin) |
- |
4750 |
|
For dimensional and qualitative tests |
| Clause.7.6(Spring) |
- |
4750 |
|
For dimensional and qualitative tests |
| Clause.8.0(Workmanship & finish) |
- |
4750 |
|
For dimensional and qualitative tests |
| Clause.9.0(Operation) |
- |
4750 |
|
For dimensional and qualitative tests |
| Clause.10.0(Sampling) |
- |
4750 |
|
For dimensional and qualitative tests |
| Clause.11.0(Tests) |
- |
4750 |
|
For dimensional and qualitative tests |
| Clause.11.1(Static Load Test) |
- |
7500 |
|
For mechanical and other load tests |
| Clause.11.2(Static-Shock Load Test) |
- |
7500 |
|
For mechanical and other load tests |
| Clause.12.0(Designation) |
- |
4750 |
|
For dimensional and qualitative tests |
| Clause.13(Marking) |
- |
4750 |
|
For dimensional and qualitative tests |
|
- |
-
- |
| 2235 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 1660 (2024) |
Wrought and Cast Aluminium Utensils Specification ( Second Revision ) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-7.1 (Handles, when fitted) |
- |
|
|
|
| Cl-7.2 (Handles) |
- |
|
|
|
| Cl-8 (Workmanship and Finish) |
- |
|
|
|
| Cl-8.3 (Minimum nominal thickness) |
- |
|
|
|
| Cl-8.3 (Thickness of hard anodized) |
- |
|
|
|
| Cl-8.3 (Finish and appearance of hard anodized) |
- |
|
|
|
| Cl-8.3 (Abrasion resistance of hard anodized) |
- |
|
|
|
| Cl-8.3 (Hardness of hard anodized) |
- |
|
|
|
| Cl-8.7 (Minimum thickness of coating) |
- |
|
|
|
| Cl-6 (Shape and Dimensions) |
- |
|
|
|
| Cl-5 (Fabrication) |
- |
|
|
|
| Cl-3.1.1, 3.1.2 (Minimum Thickness of Sheet) |
- |
|
|
|
| Cl-3.1.3, Table-2 (Minimum Thickness at the Bottom) |
- |
|
|
|
| Cl-7.3 (Cl- 5.3 of IS 13395) (Torque Strength) |
- |
|
|
|
| Cl-8.7 (The thickness test, adhesion test) |
- |
|
|
|
|
- |
-
- |
| 2236 |
SGS India Pvt Ltd, Gurgaon (8136216)
| 8136216
| IS 17635 (2022) |
Beds - Specification |
Beds - Specification |
35000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| CLAUSE 4(Design and workmanship) |
- |
1000 |
|
- |
| CLAUSE 5(Dimensions) |
- |
1000 |
|
- |
| CLAUSE 6(SURFACE PERFORMANCE) |
- |
12000 |
|
- |
| CLAUSE 6.2(Fabric and Leather (Synthetic and Natural) Performance) |
- |
8000 |
|
- |
| CLAUSE 7(SAFETY TESTS) |
- |
8000 |
|
- |
| CLAUSE 7.3(Stability Test) |
- |
1000 |
|
- |
| CLAUSE 7.4(Vertical Static Load Tests) |
- |
2000 |
|
- |
| CLAUSE 7.5(Horizontal Static Load Tests) |
- |
2000 |
|
- |
| CLAUSE 7.5.2(Horizontal Static Load Test of Beds Without Headboard) |
- |
2000 |
|
- |
| CLAUSE 7.6.1(Vertical Durability Test of Bed Base) |
- |
5000 |
|
- |
| CLAUSE 7.6.2(Horizontal Durability Test of Bed Frame) |
- |
5000 |
|
- |
| CLAUSE 7.6.3(Horizontal Durability Test of Headboards) |
- |
5000 |
|
- |
| CLAUSE 7.7(Vertical Impact Test) |
- |
2000 |
|
- |
| CLAUSE 8.1(Mechanisms for Lifting Bed Bases) |
- |
5000 |
|
- |
| CLAUSE 8.2(Extendable Storage Elements) |
- |
5000 |
|
- |
| Cl-5(Dimensions) |
- |
1000 |
|
- |
| Cl-6.1 (a)(Resistance to mechanical damage) |
- |
0 |
|
Parameter removed in IS 17635:2022 Amd -1 :2025 |
| Cl-6.1 (b)(Pencil hardness) |
- |
1000 |
|
- |
| Cl-6.1 (c)(Resistance to wet heat) |
- |
2000 |
|
- |
| Cl-6.1 (d)(Resistance to dry heat) |
- |
2000 |
|
- |
| Cl-6.1 (e)(Resistance to marking by cold liquids) |
- |
3000 |
|
- |
| Cl-6.1 (f)(Resistance to marking by cold oils and fats) |
- |
3000 |
|
- |
| Cl-6.1 (g)(Adhesive performance) |
- |
2000 |
|
- |
| Cl-6.2 (a) 1(Breaking load) |
- |
1000 |
|
- |
| Cl-6.2 (a) 2(Elongation at break) |
- |
1000 |
|
- |
| Cl-6.2 (a) 3(Tear strength) |
- |
600 |
|
- |
| Cl-6.2 (a) 4(Colour fastness to light) |
- |
1500 |
|
- |
| Cl-6.2 (a) 5(Colour fastness to rubbing) |
- |
500 |
|
- |
| Cl-6.2 (a) 6(Colour fastness to perspiration) |
- |
500 |
|
- |
| Cl-6.2 (a) 7(Colour fastness to water) |
- |
500 |
|
- |
| Cl-6.2 (a) 8(Pilling resistance) |
- |
1000 |
|
- |
| Cl-6.2 (a) 9(Coating adhesion strength) |
- |
1100 |
|
- |
| Cl-6.2 (a) 10(Seam slippage) |
- |
1000 |
|
- |
| Cl-6.2 (a) 11(Resistance to damage by flexing) |
- |
2000 |
|
- |
| Cl-6.2 (a) 12(Abrasion resistance) |
- |
1000 |
|
- |
| Cl-6.2 (a) 13(Bursting strength) |
- |
1500 |
|
- |
| Cl-6.2 (a) 14(Resistance to cold) |
- |
2000 |
|
- |
| Cl-6.2 (b) 1(Tear strength) |
- |
600 |
|
- |
| Cl-6.2 (b) 2(Flexing endurance) |
- |
1500 |
|
- |
| Cl-6.2 (b) 3(Finish adhesion) |
- |
1100 |
|
- |
| Cl-6.2 (b) 4(Colour fastness to artificial light) |
- |
1500 |
|
- |
| Cl-6.2 (b) 5(Colour fastness to rubbing) |
- |
600 |
|
- |
| Cl-6.2 (b) 6(Colour fastness to water spotting) |
- |
500 |
|
- |
| Cl-6.2 (b) 7(Water vapour permeability) |
- |
1500 |
|
- |
| Cl-6.2 (b) 8(Colour fastness to water) |
- |
500 |
|
- |
| Cl-7.1(Safety Tests) |
- |
2000 |
|
- |
| Cl-7.2(Safety Tests) |
- |
2000 |
|
- |
| Cl-7.3(Stability Test) |
- |
2000 |
|
- |
| Cl-7.4.1(Vertical Static Load on Bed Base) |
- |
2000 |
|
- |
| Cl-7.4.2(Vertical Static Load on Side Rail) |
- |
2000 |
|
- |
| Cl-7.5.1(Horizontal Static Load on Headboard) |
- |
2000 |
|
- |
| Cl-7.5.2(Horizontal Static Load Test of Beds Without Headboard) |
- |
2000 |
|
- |
| Cl-7.6.1(Vertical Durability Test of Bed Base) |
- |
5000 |
|
- |
| Cl-7.6.2(Horizontal Durability Test of Bed Frame) |
- |
5000 |
|
- |
| Cl-7.6.3(Horizontal Durability Test of Headboards) |
- |
5000 |
|
- |
| Cl-7.7(Vertical Impact Test) |
- |
2000 |
|
- |
| Cl-8.1.2(Durability of Mechanisms for Lifting Bed Bases) |
- |
5000 |
|
- |
| Cl-8.2.2(Durability of Extendable Storage Elements) |
- |
5000 |
|
- |
| Cl-10(Marking) |
- |
300 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f. 27.04.2026 |
| 2237 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 2191 : Part 1 (2022) |
WOODEN FLUSH DOOR SHUTTERS CELLULAR TUBULAR AND HOLLOW CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Fifth Revision |
- |
30000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5(Sizes) |
- |
400 |
|
- |
| Cl-6.1.1(Species of timber) |
- |
1500 |
|
- |
| Cl-6.3(Cross-Bands) |
- |
1500 |
|
- |
| Cl-6.4.1(Commercial face veneers) |
- |
1500 |
|
- |
| Cl-6.4.2(Decorative face veneers) |
- |
1500 |
|
- |
| Cl-6.7(Particle Board) |
- |
1500 |
|
- |
| Cl-6.8(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), Medium Density Fibre (MDF)) |
- |
1500 |
|
- |
| Cl-11.1(Dimensions and Squareness Test) |
- |
500 |
|
- |
| Cl-11.2(General Flatness Test) |
- |
1000 |
|
- |
| Cl-11.3(Local Planeness Test) |
- |
1000 |
|
- |
| Cl-11.4(Impact Indentation Test) |
- |
1000 |
|
- |
| Cl-11.5(Flexure Test) |
- |
1500 |
|
- |
| Cl-11.6(Edge Loading Test) |
- |
1000 |
|
- |
| Cl-11.7(Shock Resistance Test) |
- |
1000 |
|
- |
| Cl-11.8(Buckling Resistance Test) |
- |
1500 |
|
- |
| Cl-11.9(Slamming Test) |
- |
1500 |
|
- |
| Cl-11.10(Misuse Test) |
- |
1500 |
|
- |
| Cl-11.11(Varying Humidity Test) |
- |
6000 |
|
- |
| Cl-11.12(End Immersion Test) |
- |
1500 |
|
- |
| Cl-11.13(Knife Test) |
- |
1000 |
|
- |
| Cl-11.15(Screw Withdrawal Resistance Test) |
- |
2000 |
|
- |
| Cl-12.2(Sample Size) |
- |
100 |
|
- |
| Cl-14(Marking) |
- |
100 |
|
- |
| Cl-6.1.2(Moisture content of timber) |
- |
500 |
|
- |
| Cl-9(Workmanship and Finish) |
- |
500 |
|
- |
| Cl-6.1.3(Defects) |
- |
200 |
|
- |
| Cl-6.2(Plywood) |
- |
500 |
|
- |
| Cl-6.5(Cross-bands and face veneers) |
- |
500 |
|
- |
| Cl-6.6(Adhesives) |
- |
500 |
|
- |
| Cl-7(Construction) |
- |
500 |
|
- |
| Cl-8(Fittings) |
- |
500 |
|
- |
| Cl-11.14(Glue Adhesion Test) |
- |
1500 |
|
- |
|
- |
-
Included w.e.f. 13.01.2025 |
| 2238 |
Eureka Analytical Services Private Limited, Bengaluru
| 6171206
| IS 14543 (2024) |
Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision |
- |
27000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.3(Appearance) |
- |
100 |
|
- |
| 5.3/Table 2/xiii(Suphate) |
- |
300 |
|
- |
| Cl-5.1(General Requirements) |
- |
100 |
|
- |
| Cl-5.2.1(Escherichia coli or thermotolerant bacteria) |
- |
300 |
|
- |
| Cl-5.2.2(Coliform) |
- |
300 |
|
- |
| Cl-5.2.3(Staphylococcus aureus) |
- |
500 |
|
- |
| Cl-5.2.4(Sulphite Reducing Anaerobes) |
- |
500 |
|
- |
| Cl-5.2.5(Pseudomonas Aeruginosa) |
- |
600 |
|
- |
| Cl-5.2.6(Aerobic Microbial Count @ 37 deg C) |
- |
300 |
|
- |
| Cl-5.2.7(Yeast and mould) |
- |
400 |
|
- |
| 5.4/Annex D/i(P,P-DDT) |
- |
2000 |
|
- |
| 5.4/Annex D/ii(Lindane) |
- |
2000 |
|
- |
| 5.4/Annex D/iv(b-Endosulfan) |
- |
2000 |
|
- |
| 5.4/Annex D/xvi(Dieldrin) |
- |
2000 |
|
- |
| 5.4/Annex D/xvi(Aldrin) |
- |
2000 |
|
- |
| 5.4/Annex D/i(O,P-DDT) |
- |
2000 |
|
- |
| 5.4/Annex D/iv(a-Endosulfan) |
- |
2000 |
|
- |
| 5.4/Annex D/iii(d-HCH) |
- |
2000 |
|
- |
| 5.4/Annex D/i(O,P-DDD) |
- |
2000 |
|
- |
| 5.4/Annex D/i(P,P-DDE) |
- |
2000 |
|
- |
| 5.4/Annex D/i(O,P-DDE) |
- |
2000 |
|
- |
| 5.4/Annex D/iii(a-HCH) |
- |
2000 |
|
- |
| 5.4/Annex D/iii(β- HCH) |
- |
2000 |
|
- |
| 5.4/Annex D/iv(Endosulfan sulfate) |
- |
2000 |
|
- |
| 5.4/Annex D/i(P,P-DDD) |
- |
2000 |
|
- |
| 5.4/Annex D/xii(Alachlor) |
- |
2000 |
|
- |
| 5.4/Annex D/vii(Chlorpyrifos) |
- |
2000 |
|
- |
| 5.4/Annex D/x(Butachlor) |
- |
2000 |
|
- |
| 5.4/Annex D/vi(Ethion) |
- |
2000 |
|
- |
| 5.4/Annex D/xiv(Methyl parathion) |
- |
2000 |
|
- |
| 5.4/Annex D/xv(Malathion) |
- |
2000 |
|
- |
| 5.4/Annex D/viii(Phorate) |
- |
2000 |
|
- |
| 5.4/Annex D/v(Monochrotophos) |
- |
2000 |
|
- |
| 5.4/Annex D/xiii(Atrazine) |
- |
2000 |
|
- |
| 5.4/Annex D/viii(Phorate sulphoxide) |
- |
2000 |
|
- |
| 5.4/Annex D/viii(Phorate sulfone) |
- |
2000 |
|
- |
| 5.4/Annex D/xxvii(Methyl paraoxon) |
- |
2000 |
|
- |
| 5.4/Annex D/xxviii(Malaoxon) |
- |
2000 |
|
- |
| 5.4/Annex D/xi(Isoproturon) |
- |
2000 |
|
- |
| 5.4/Annex D/ix(2,4 –D) |
- |
2000 |
|
- |
| Cl-5.2.8(Salmonella) |
- |
550 |
|
- |
| Cl-5.2.9(Vibrio cholera) |
- |
500 |
|
- |
| Cl-5.3, Table-1 (i)(Colour, true colour units, Max) |
- |
200 |
|
- |
| Cl-5.3, Table-1 (ii)(Odour) |
- |
200 |
|
- |
| Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max) |
- |
300 |
|
- |
| Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max) |
- |
300 |
|
- |
| Cl-5.3, Table-1 (vi)(pH) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (i)(Barium (as Ba)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (ii)(Copper (as Cu)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (iii)(Iron (as Fe)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (iv)(Manganese (as Mn)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (v)(Nitrate (as NO3 )) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (vi)(Nitrite (as NO2 )) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (vii)(Fluoride (as F)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (viii)(Zinc (as Zn)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (ix)(Silver (as Ag)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (x)(Aluminium (as A1)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xi)(Chloride (as Cl)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xii)(Selenium (as Se)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 )) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 )) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xv)(Calcium (as Ca)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xvii)(Sodium (as Na)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xviii)(Residual free chlorine) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xx)(Mineral oil) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xxi)(Anionic surface active agents) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xxii)(Sulphide) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xxiii)(Antimony (as Sb)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xxiv)(Borates (as B)) |
- |
300 |
|
- |
| Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 )) |
- |
2500 |
|
- |
| Cl-5.3, Table-3 (i)(Mercury (as Hg)) |
- |
300 |
|
- |
| Cl-5.3, Table-3 (ii)(Cadmium (as Cd)) |
- |
300 |
|
- |
| Cl-5.3, Table-3 (iii)(Arsenic (as As)) |
- |
300 |
|
- |
| Cl-5.3, Table-3 (iv)(Cyanide (as CN)) |
- |
300 |
|
- |
| Cl-5.3, Table-3 (v)(Lead (as Pb)) |
- |
300 |
|
- |
| Cl-5.3, Table-3 (vi)(Chromium (as Cr)) |
- |
300 |
|
- |
| Cl-5.3, Table-3 (vii)(Nickel (as Ni)) |
- |
300 |
|
- |
| Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB)) |
- |
2000 |
|
- |
| Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons) |
- |
2000 |
|
- |
| Cl-5.3, Table-3 (x)(Uranium) |
- |
1500 |
|
- |
| Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l)) |
- |
2500 |
|
- |
| Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),) |
- |
2500 |
|
- |
| Cl-5.4 (i)(Pesticide residues considered individually) |
- |
2000 |
|
- |
| Cl-5.4 (ii)(Total pesticide residue) |
- |
2000 |
|
- |
| Cl-5.2.3(Faecal streptococci) |
- |
500 |
|
- |
| Cl-5.2.8(shigella) |
- |
550 |
|
- |
| Cl-5.2.9(V.parahaemolyticus) |
- |
500 |
|
- |
| 5.2.6(Aerobic Microbial Count @ 20 to 22 deg C) |
- |
300 |
|
- |
| 5.4 i)(Dieldrin) |
- |
2000 |
|
- |
| 5.4 i)(Malathion) |
- |
2000 |
|
- |
| 5.4, i)("oxygen analogue of Malathion (Malaoxon)") |
- |
2000 |
|
- |
| 5.4 i)(Methyl Paraoxon) |
- |
2000 |
|
- |
| 5.4 i)(Methyl Parathion) |
- |
2000 |
|
- |
| 5.4 i)(Atrazine) |
- |
2000 |
|
- |
| 5.4 i)(Alachlor) |
- |
2000 |
|
- |
| 5.4 i)(Isoproturon) |
- |
2000 |
|
- |
| 5.4 i)(Butachlor) |
- |
2000 |
|
- |
| 5.4 i)(2,4-D) |
- |
2000 |
|
- |
| 5.4 i)(Phorate sulphone) |
- |
2000 |
|
- |
| 5.4 i)(Phorate sulphoxide) |
- |
2000 |
|
- |
| 5.4 i)(Phorate) |
- |
2000 |
|
- |
| 5.4 i)(Chlorpyrifos) |
- |
2000 |
|
- |
| 5.4 i)(Ethion) |
- |
2000 |
|
- |
| 5.4 i)(Monocrotophos) |
- |
2000 |
|
- |
| 5.4 i)(Endosulfan Sulphate) |
- |
2000 |
|
- |
| 5.4 i)(beta-Endosulfan) |
- |
2000 |
|
- |
| 5.4 i)(alpha-Endosulfan) |
- |
2000 |
|
- |
| 5.4 i)(Delta-HCH) |
- |
2000 |
|
- |
| 5.4 i)(beta-HCH) |
- |
2000 |
|
- |
| 5.4 i)(alpha-HCH) |
- |
2000 |
|
- |
| 5.4 i)(Gamma-HCH (Lindane)) |
- |
2000 |
|
- |
| 5.4 i)(p,p DDD) |
- |
2000 |
|
- |
| 5.4 i)(o,p DDD) |
- |
2000 |
|
- |
| 5.4 i)(p,p DDT) |
- |
2000 |
|
- |
| 5.4 i)(p,p DDE) |
- |
2000 |
|
- |
| 5.4, i)(o,p DDE) |
- |
2000 |
|
- |
| 5.4 i)(o,p DDT) |
- |
2000 |
|
- |
| Table 3, x)(Uranium) |
- |
1500 |
|
- |
| Cl-5.3, Table-1 (iii)(Taste) |
- |
200 |
|
- |
| Cl-5.3, Table-2 (xvi)(Magnesium (as Mg)) |
- |
300 |
|
- |
| 5.4 i)(Aldrin) |
- |
2000 |
|
- |
|
02 Aug, 2028 |
-
included w.e.f 27.01.2026 |
| 2239 |
National Test House (WR) - NTH, Mumbai
| 7107604
| IS 15787 (2025) |
Switched Socket-Outlets without Interlock for Fixed Installations- Particular Requirements ( First Revision ) |
- |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(General Requirements) |
- |
500 |
|
- |
| Cl-6(Rating) |
- |
500 |
|
- |
| Cl-8(Marking) |
- |
500 |
|
- |
| Cl-9(Checking of Dimensions) |
- |
1000 |
|
- |
| Cl-10(Protection against electric shock) |
- |
500 |
|
- |
| Cl-11(Provision for earthing) |
- |
500 |
|
- |
| Cl-12(Terminals) |
- |
500 |
|
- |
| Cl-13(Construction of fixed socket-outlet) |
- |
500 |
|
- |
| Cl-14(Construction of plugs and portable socket-outlets) |
- |
500 |
|
- |
| Cl-16(Resistance to ageing, harmful ingress of water and to humidity) |
- |
1500 |
|
- |
| Cl-17(Insulation resistance & electric strength) |
- |
500 |
|
- |
| Cl-17.3(Electric Strength (Flash Test)) |
- |
500 |
|
- |
| Cl-18(Operation of earthing contacts) |
- |
500 |
|
- |
| Cl-19(Temperature rise) |
- |
1500 |
|
- |
| Cl-20(Breaking capacity) |
- |
4000 |
|
- |
| Cl-21(Normal operation) |
- |
6000 |
|
- |
| Cl-22(Force necessary to withdraw the plug) |
- |
500 |
|
- |
| Cl-24(Mechanical strength) |
- |
500 |
|
- |
| Cl-25(Resistance to heat) |
- |
500 |
|
- |
| Cl-26(Screws, current carrying parts and connections) |
- |
500 |
|
- |
| Cl-27(Creepage distance & clearances & distance through sealing compound) |
- |
500 |
|
- |
| Cl-28(Resistance of Insulating material to abnormal heat, fire and tracking) |
- |
1000 |
|
- |
| Cl-29(Resistance to rusting) |
- |
500 |
|
- |
| Cl-4(General Requirements) |
- |
500 |
|
- |
| Cl-6(Rating) |
- |
500 |
|
- |
| Cl-8(Marking) |
- |
500 |
|
- |
| Cl-9(Checking of Dimensions) |
- |
500 |
|
- |
| Cl-10(Protection against electric shock) |
- |
500 |
|
- |
| Cl-11(Provision for earthing) |
- |
500 |
|
- |
| Cl-12(Terminals) |
- |
500 |
|
- |
| Cl-13(Construction of fixed socket-outlet) |
- |
500 |
|
- |
| Cl-14(Construction of plugs and portable socket-outlets) |
- |
500 |
|
- |
| Cl-16(Resistance to ageing, harmful ingress of water and to humidity) |
- |
500 |
|
- |
| Cl-17(Insulation resistance & electric strength) |
- |
1000 |
|
- |
| Cl-17.3(Electric Strength (Flash Test)) |
- |
500 |
|
- |
| Cl-18(Operation of earthing contacts) |
- |
500 |
|
- |
| Cl-19(Temperature rise) |
- |
500 |
|
- |
| Cl-20(Breaking capacity) |
- |
1000 |
|
- |
| Cl-21(Normal operation) |
- |
3000 |
|
- |
| Cl-22(Force necessary to withdraw the plug) |
- |
500 |
|
- |
| Cl-24(Mechanical strength) |
- |
500 |
|
- |
| Cl-25(Resistance to heat) |
- |
1000 |
|
- |
| Cl-26(Screws, current carrying parts and connections) |
- |
500 |
|
- |
| Cl-27(Creepage distance & clearances & distance through sealing compound) |
- |
500 |
|
- |
| Cl-28(Resistance of Insulating material to abnormal heat, fire and tracking) |
- |
500 |
|
- |
| Cl-29(Resistance to rusting) |
- |
500 |
|
- |
|
- |
-
included w.e.f 24.03.2026 |
| 2240 |
VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD
| 8185906
| IS 16353 (2015) |
Portland Cement Clinker - Specification |
All |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 5 Table 1(Ratio of percentage of lime to percentages of silica, alumina and iron oxide) |
- |
2000 |
|
- |
| Clause 5 Table 1(Ratio of percentage of alumina to that of iron oxide,) |
- |
1500 |
|
- |
| Clause 5 Table 1(C3S, percent by mass) |
- |
1500 |
|
- |
| Clause 5 Table 1(C3A, percent by mass) |
- |
1500 |
|
- |
| Clause 5 Table 1(C3S+C2S, percent by mass) |
- |
1000 |
|
- |
| Clause 5 Table 1(Total sulphur content calculated as sulphuric anhydride (SO3)) |
- |
500 |
|
- |
| Clause 5 Table 1(Free lime) |
- |
500 |
|
- |
| Clause 5 Table 1(Chloride content) |
- |
500 |
|
- |
| Clause 5 Table 1(Magnesia) |
- |
500 |
|
- |
| Clause 5 Table 1(Alkali content) |
- |
1000 |
|
- |
| Clause 5 Table 1(Total loss on ignition) |
- |
1000 |
|
- |
| Clause 5 Table 1(Insoluble residue) |
- |
1000 |
|
- |
| 6.1 Table 3 iii)
(Granulometric composition of clinker(Size >50 mm)) |
- |
500 |
|
- |
| 6.2 Table 3 ii)
(Granulometric composition of clinker(Size 5-50 mm)) |
- |
500 |
|
- |
| 6.2 Table 3 i) (Granulometric composition of clinker(Size <5 mm)) |
- |
500 |
|
- |
| 6.1 Table 2 iii) c)
IS 4031 (Part 6)(Compressive Strength at 672±4 h) |
- |
1500 |
|
- |
| 6.1 Table 2 iii) b)
IS 4031 (Part 6)(Compressive Strength at 168±2 h) |
- |
1000 |
|
- |
| 6.1 Table 2 iii) a)
IS 4031 (Part 6)(Compressive Strength at 72±1 h) |
- |
1000 |
|
- |
| 6.1 Table 2 ii) b)
IS 4031 (Part 5)(Final Setting time) |
- |
1000 |
|
- |
| 6.1 Table 2 ii) a)
IS 4031 (Part 5)(Initial Setting time) |
- |
1000 |
|
- |
| 6.1 Table 2 i) b)
IS 4031 (Part 3)(Soundness by Autoclave test method) |
- |
1000 |
|
- |
| 6.1 Table 2 i) a)
IS 4031 (Part 3)(Soundness by Le-Chatelier method) |
- |
1000 |
|
- |
| 6.1
IS 4031(Part 2)(Fineness) |
- |
1000 |
|
- |
| Cl. 5,Table 1(Insoluble chloride) |
- |
1000 |
|
- |
| Cl. 5,Table 1(Total loss on ignition) |
- |
1000 |
|
- |
| Cl. 5,Table 1(Alkali content,expressed as sodium oxide) |
- |
1000 |
|
- |
| Cl. 5,Table 1(Magnesia) |
- |
1000 |
|
- |
| Cl. 5,Table 1(Chloride content) |
- |
1000 |
|
- |
| Cl. 5,Table 1(Free lime) |
- |
1000 |
|
- |
| Cl. 5,Table 1(Total sulphur content calculated as sulphuric anhydride) |
- |
1000 |
|
- |
| Cl. 5,Table 1(C3S+C2S) |
- |
1000 |
|
- |
| Cl. 5,Table 1(C3A) |
- |
1000 |
|
- |
| Cl. 5,Table 1(C3S) |
- |
1000 |
|
- |
| Cl. 5,Table 1(Ratio of percentage of alumina to that of iron oxide) |
- |
1000 |
|
- |
| Cl. 5,Table 1(Ratio of percentage of lime to percentages of silica, alumina and iron oxide) |
- |
1000 |
|
- |
|
23 May, 2028 |
-
included w.e.f 01.04.2026 |
| 2241 |
Akshat Test Lab & Calibration Services, Ghaziabad
| 8186526
| IS 398 : Part 4 (1994) |
Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision) |
Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision) |
1250 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1(Freedom from Defects) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 7.1 Table-1(Dimensional measurement of wires) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 8.1(Joints in wires-Conductors Containing Seven Wires) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 8.2(Joints in wires-Conductors Containing More Than Seven Wires) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 9.1(Stranding) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 9.2 Table 3(Lay Ratio of stranded conductors) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 9.3(Direction of Lay) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 9.4(Multiple layers of wires) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 11(Packing and Marking) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 12.2 Table 1(Breaking Load Test- Before Stranding) |
- |
1000 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 12.2 Table 1(Breaking Load Test- After Stranding) |
- |
1000 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 12.3 Table 1(Elongation Test- Before Stranding) |
- |
1000 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 12.3 Table 1(Elongation Test- After Stranding) |
- |
1000 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 12.4 Table 1(Resistance of Aluminium wire) |
- |
1000 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 9.2(Lay Ratio 24 wire layer) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 9.2(Lay Ratio 18 wire layer) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 9.2(Lay Ratio 12 wire layer) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 9.2(Lay Ratio 3/6 wire layer) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| 7.2.1(Sizes) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
| Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load) |
- |
500 |
|
Rs. 1250/- for 7 strands, Rs. 3200/- for 19 strands
Rs. 6400/- for 37 stands, Rs. 14200/- for 61 stands. |
|
- |
-
included w.e.f 30.01.2026 |
| 2242 |
Bharat Test House Pvt Ltd 781 Sonipat Haryana
| 9137826
| IS 302 : Part 2 : Sec 12 (1993) |
Safety of household and similar electrical appliances - Specification: Part 2 particular requirements: Sec 12 warming plates and similar appliances |
Warming plates and similar appliances |
148500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Rating) |
- |
100 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 6(Classification) |
- |
100 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 7(Marking) |
- |
200 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 8(Protection against Access to Live Parts) |
- |
500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 9(Starting Of Motor Operated Appliances) |
- |
10 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 10("Power Input
& Current") |
- |
1000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 11(Temperature Rise/ Heating) |
- |
1500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 12(Operation Under Overload Conditions of Appliances with heating Element) |
- |
1000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 13(Leakage Current and Electric Strength at Operating Temperature) |
- |
750 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 14("Radio and Television Interference Suppression / Transient Over Voltage
") |
- |
400 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 15(Moisture Resistance) |
- |
2000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength) |
- |
750 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 17(Overload Protection/ Overload Protection of Transformers & Associated Circuits) |
- |
500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 18(Endurance) |
- |
10 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 19(Abnormal Operation) |
- |
2500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 20(Stability & Mechanical Hazards) |
- |
1250 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 21(Mechanical strength) |
- |
1250 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 22(Construction) |
- |
2500 |
|
Clause 22.16, 22.32 and 22.46 are in Exclusion.
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 23(Internal Wiring) |
- |
500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 24(Components) |
- |
100 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 25(Supply Connection & External Flexible Cords) |
- |
1000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 26(Terminals For External Conductors) |
- |
500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 27(Provision For Earthing) |
- |
700 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 28(Screws & Connections) |
- |
700 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 29(Clearances, Creepage Distances & Solid Insulation) |
- |
1000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 30(Resistance to Heat & Fire) |
- |
1200 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 31(Resistance to Rusting) |
- |
1000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 32(Radiation hazards) |
- |
500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 19.11.4.1(Electrostatic discharges) |
- |
20000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.2(Radiated fields) |
- |
20000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.3(Fast transient bursts) |
- |
20000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.4(Surge immunity test) |
- |
10000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.5(Immunity to conducted discharges) |
- |
20000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
20000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.7(Harmonics) |
- |
15000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 5(Rating) |
- |
100 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 6(Classification) |
- |
100 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 7(Marking) |
- |
200 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 8(Protection against Access to Live Parts) |
- |
500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 9(Starting Of Motor Operated Appliances) |
- |
10 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 10("Power Input
& Current") |
- |
1000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 11(Temperature Rise/ Heating) |
- |
1500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 12(Operation Under Overload Conditions of Appliances with heating Element) |
- |
1000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 13(Leakage Current and Electric Strength at Operating Temperature) |
- |
750 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 14("Radio and Television Interference Suppression / Transient Over Voltage
") |
- |
400 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 15(Moisture Resistance) |
- |
2000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength) |
- |
750 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 17(Overload Protection/ Overload Protection of Transformers & Associated Circuits) |
- |
500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 18(Endurance) |
- |
10 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 19(Abnormal Operation) |
- |
2500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 20(Stability & Mechanical Hazards) |
- |
1250 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 21(Mechanical strength) |
- |
1250 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 22(Construction) |
- |
2500 |
|
Clause 22.16, 22.32 and 22.46 are in Exclusion.
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 23(Internal Wiring) |
- |
500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 24(Components) |
- |
100 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 25(Supply Connection & External Flexible Cords) |
- |
1000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 26(Terminals For External Conductors) |
- |
500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 27(Provision For Earthing) |
- |
700 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 28(Screws & Connections) |
- |
700 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 29(Clearances, Creepage Distances & Solid Insulation) |
- |
1000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 30(Resistance to Heat & Fire) |
- |
1250 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 31(Resistance to Rusting) |
- |
1000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 32(Radiation hazards) |
- |
500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 19.11.4.1(Electrostatic discharges) |
- |
20000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.2(Radiated fields) |
- |
20000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.3(Fast transient bursts) |
- |
20000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.4(Surge immunity test) |
- |
10000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.5(Immunity to conducted discharges) |
- |
20000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
20000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.7(Harmonics) |
- |
15000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 5(Rating) |
- |
100 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 6(Classification) |
- |
100 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 7(Marking) |
- |
200 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 8(Protection against Access to Live Parts) |
- |
500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 9(Starting Of Motor Operated Appliances) |
- |
10 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 10("Power Input
& Current") |
- |
1000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 11(Temperature Rise/ Heating) |
- |
1500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 12(Operation Under Overload Conditions of Appliances with heating Element) |
- |
1000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 13(Leakage Current and Electric Strength at Operating Temperature) |
- |
750 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 14("Radio and Television Interference Suppression / Transient Over Voltage
") |
- |
400 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 15(Moisture Resistance) |
- |
2000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength) |
- |
750 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 17(Overload Protection/ Overload Protection of Transformers & Associated Circuits) |
- |
500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 18(Endurance) |
- |
10 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 19(Abnormal Operation) |
- |
2500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 20(Stability & Mechanical Hazards) |
- |
1250 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 21(Mechanical strength) |
- |
1250 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 22(Construction) |
- |
2500 |
|
Clause 22.16, 22.32 and 22.46 are in Exclusion.
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 23(Internal Wiring) |
- |
500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 24(Components) |
- |
100 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 25(Supply Connection & External Flexible Cords) |
- |
1000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 26(Terminals For External Conductors) |
- |
500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 27(Provision For Earthing) |
- |
700 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 28(Screws & Connections) |
- |
700 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 29(Clearances, Creepage Distances & Solid Insulation) |
- |
1000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 30(Resistance to Heat & Fire) |
- |
1200 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 31(Resistance to Rusting) |
- |
1000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 32(Radiation hazards) |
- |
500 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs. |
| 19.11.4.1(Electrostatic discharges) |
- |
20000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.2(Radiated fields) |
- |
20000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.3(Fast transient bursts) |
- |
20000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.4(Surge immunity test) |
- |
10000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.5(Immunity to conducted discharges) |
- |
20000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.6(Class 3 Voltage dips and interruptions) |
- |
20000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
| 19.11.4.7(Harmonics) |
- |
15000 |
|
Complete Charges with EMI/EMC- Rs.1,48,500/- Rs., Complete Charges without EMI/EMC- Rs.23,500/- Rs.
The EMI/EMC Test facility is available under our other BIS recognized lab. |
|
31 Dec, 2029 |
-
Included w.e.f 03.08.2026
Exclusion: 24 (Components) |
| 2243 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 17954 (2023) |
TELESCOPIC BALL BEARING DRAWER SLIDE SPECIFICATION |
- |
24500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.2, Table- 2 (i)(Internal channel) |
- |
500 |
|
- |
| Cl-4.2, Table- 2 (ii)(Outer channel) |
- |
500 |
|
- |
| Cl-4.2, Table- 2 (iii)(Track up to 550 mm) |
- |
500 |
|
- |
| Cl-4.2, Table- 2 (iv)(Track from 600 mm onwards) |
- |
500 |
|
- |
| Cl-4.2, Table- 2 (v)(Ball cage) |
- |
500 |
|
- |
| Cl-4.2, Table- 2 (vi)(Ball spacer) |
- |
500 |
|
- |
| Cl-5(Components and Manufacture) |
- |
0 |
|
- |
| Cl-5(Components and Manufacture) |
- |
0 |
|
- |
| Cl-6.1(Preparatory Measures) |
- |
0 |
|
- |
| Cl-6.2 (a)(Limiting Deviations- Force) |
- |
0 |
|
- |
| Cl-6.2 (b)(Limiting Deviations- Speed) |
- |
0 |
|
- |
| Cl-6.2 (c)(Limiting Deviations- Weights) |
- |
0 |
|
- |
| Cl-6.2 (d)(Limiting Deviations- Dimension) |
- |
0 |
|
- |
| Cl-6.3(Application of Forces) |
- |
0 |
|
- |
| Cl-6.4(Testing Equipment) |
- |
0 |
|
- |
| Cl-6.5(Sequence of testing) |
- |
0 |
|
- |
| Cl-7(Vertical Load Test) |
- |
3999.98 |
|
- |
| Cl-8(Horizontal Load Test) |
- |
4000 |
|
- |
| Cl-9(Durability Test) |
- |
5100 |
|
- |
| Cl-10(Deflection Test) |
- |
3500 |
|
- |
| Cl-11(Slam Test) |
- |
3500 |
|
- |
| Cl-12(Finish) |
- |
2500 |
|
- |
| Cl-5.11(Ball) |
- |
1000 |
|
- |
| Cl-5.10(Rivets) |
- |
1000 |
|
- |
| 4.1(size of the telescopic ball bearing slide) |
- |
500 |
|
- |
| 6.6 (amendment 1)(difference of the maximum forces for opening and closing) |
- |
500 |
|
- |
|
- |
-
Included w.e.f. 13.01.2025 |
| 2244 |
ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD
| 8180426
| IS 15787 (2025) |
Switched Socket-Outlets without Interlock for Fixed Installations- Particular Requirements ( First Revision ) |
---- |
22000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(General Requirements) |
- |
200 |
|
- |
| Cl-6(Rating) |
- |
500 |
|
- |
| Cl-8(Marking) |
- |
500 |
|
- |
| Cl-9(Checking of Dimensions) |
- |
1000 |
|
- |
| Cl-10(Protection against electric shock) |
- |
500 |
|
- |
| Cl-11(Provision for earthing) |
- |
500 |
|
- |
| Cl-12(Terminals) |
- |
500 |
|
- |
| Cl-13(Construction of fixed socket-outlet) |
- |
500 |
|
- |
| Cl-14(Construction of plugs and portable socket-outlets) |
- |
500 |
|
- |
| Cl-16(Resistance to ageing, harmful ingress of water and to humidity) |
- |
500 |
|
- |
| Cl-17(Insulation resistance & electric strength) |
- |
500 |
|
- |
| Cl-17.3(Electric Strength (Flash Test)) |
- |
500 |
|
- |
| Cl-18(Operation of earthing contacts) |
- |
500 |
|
- |
| Cl-19(Temperature rise) |
- |
500 |
|
- |
| Cl-20(Breaking capacity) |
- |
1000 |
|
- |
| Cl-21(Normal operation) |
- |
500 |
|
- |
| Cl-22(Force necessary to withdraw the plug) |
- |
500 |
|
- |
| Cl-24(Mechanical strength) |
- |
500 |
|
- |
| Cl-25(Resistance to heat) |
- |
500 |
|
- |
| Cl-26(Screws, current carrying parts and connections) |
- |
500 |
|
- |
| Cl-27(Creepage distance & clearances & distance through sealing compound) |
- |
500 |
|
- |
| Cl-28(Resistance of Insulating material to abnormal heat, fire and tracking) |
- |
500 |
|
- |
| Cl-29(Resistance to rusting) |
- |
500 |
|
- |
|
03 Oct, 2027 |
-
Included w.e.f 19.05.2026 |
| 2245 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 17875 (2022) |
Stainless Steel seamless pipes and tubes for general service |
- |
24500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.0 (Table No.- 1)(Chemical Composition,% - IS 228) |
- |
1500 |
|
- |
| 10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608) |
- |
2000 |
|
- |
| 11(Transverse Tension Test,%) |
- |
2000 |
|
- |
| 12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1)) |
- |
1500 |
|
- |
| 13 (Table No.- 7)(Flaring Test) |
- |
1500 |
|
- |
| 14(Flattaning Test-IS 2328) |
- |
1500 |
|
- |
| 15.1 (Table No.- 8)(Grain Size,No.-IS 4748) |
- |
2500 |
|
- |
| 17(Leak Tighteness Test) |
- |
3000 |
|
- |
| 18("Corrosion Test-IS 10461
(Part 1) or IS 10461 (Part 2)") |
- |
3500 |
|
- |
| 19(Eddy current test & Air under water) |
- |
2500 |
|
- |
| 21(Workmanship, Finish and Appearance) |
- |
500 |
|
- |
| 22(Repair by Welding or Grinding) |
- |
0 |
|
- |
| 23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm) |
- |
1000 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Carbon) |
- |
500 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Silicon) |
- |
500 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Mangnese) |
- |
500 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Nickel) |
- |
500 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Chromium) |
- |
500 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Molybdenum) |
- |
500 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Sulphur) |
- |
500 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Phosphorous) |
- |
500 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Nitrogen) |
- |
500 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Copper) |
- |
500 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Aluminium) |
- |
500 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Titanium) |
- |
500 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Niobium) |
- |
500 |
|
- |
| "Clause 18 IS 10461(Part 1)"(Corrosion Test) |
- |
500 |
|
- |
| Clause 10.1 - Table 4(Tensile Strength) |
- |
2000 |
|
- |
| Clause 10.1 - Table 4(Percent Elongation) |
- |
2000 |
|
- |
| Clause 11(Transverse Tension Test) |
- |
2000 |
|
- |
| Clause 12(Hardness Test) |
- |
1500 |
|
- |
| Clause 13(Flaring Test) |
- |
1500 |
|
- |
| Clause 14(Flattening Test) |
- |
1500 |
|
- |
| Clause 15(Grain Size) |
- |
2500 |
|
- |
| Clause 17(Leak Tightness Test) |
- |
3000 |
|
- |
| "Clause 18 IS 10461(Part 2)"(Corrosion Test) |
- |
3500 |
|
- |
| Clause 21(Workmanship, Finish & Appearance) |
- |
500 |
|
- |
| Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances) |
- |
1000 |
|
- |
| 10.2(Hardness test IS 1500 (part-1):2019) |
- |
1500 |
|
- |
| 12.2(Flaring test IS 17878:2022) |
- |
1500 |
|
- |
| 16(Sampling) |
- |
0 |
|
- |
| 24(Marking) |
- |
0 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(W) |
- |
500 |
|
- |
| "Clause 8.1 and 8.2 - Table 1"(Ta) |
- |
500 |
|
- |
| "Clause 8.1 and 8.2 - Table 2"(V) |
- |
500 |
|
- |
|
- |
-
Included w.e.f. 13.01.2025 |
| 2246 |
MALKAPUR LABORATORY (IOCL)
| 6196614
| IS 15464 (2022) |
ANHYDROUS ETHANOL FOR USE AS BLENDING COMPONENT IN MOTOR GASOLINE SPECIFICATION First Revision |
- |
12370 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.4-Table 1-i)(Appearance) |
- |
200 |
|
Exclusive Tax |
| 4.4-Table 1-ii)(Relative density at 15.6/15.6 °C, Max) |
- |
1130 |
|
Exclusive Tax |
| 4.4-Table 1-iii)(Ethanol, percent, v/v, Min1)). (excluding denaturant)) |
- |
1340 |
|
Exclusive Tax |
| 4.4-Table 1-iv)(Ethanol, percent, v/v, Min1). (excluding denaturant)) |
- |
1340 |
|
Exclusive Tax |
| 4.4-Table 1-vii)(Residue on evaporation, percent by mass, Max.) |
- |
1900 |
|
Exclusive Tax |
| 4.4-Table 1-viii)(Acidity (as CH3 COOH), mg/kg, Max.) |
- |
400 |
|
Exclusive Tax |
| 4.4-Table 1-xv)(Sulfur content, mg/kg, Max.) |
- |
4710 |
|
Exclusive Tax |
| 4.4-Table 1-x)(Aldehyde (as CH3 CHO) content, mg/l, Max) |
- |
1910 |
|
Exclusive Tax |
| 4.4-Table 1-ix)(Alkalinity, mg/kg, Max.) |
- |
400 |
|
Exclusive Tax |
| 4.4-Table 1-xix)(Miscibility with water) |
- |
380 |
|
Exclusive Tax |
|
09 Feb, 2029 |
-
Excluding: 4.1 (Description) 4.2 (Denaturant) 4.3 (Acidity) 4.4-Table 1-v) (Higher saturated alcohols (C3-C5), percent, v/v, Max) 4.4-Table 1-vi) (Boiling point, °C, Min.) 4.4-Table 1-xi) (Electrical conductivity, µS/m, Max) 4.4-Table 1-xii) (Copper, mg/kg, Max.) 4.4-Table 1-xiii) (pHe) 4.4-Table 1-xiv) (Inorganic chloride, mg/kg, Max.) 4.4-Table 1-xvii) (Water content, percent v/v, Max.) 4.4-Table 1-xviii) (Hydrocarbons, percent v/v) 5.2 (Marking) 7.1 (Tests shall be conducted) 4.4-Table 1 iv (Methanol) 4.4-Table 1-xvi) (Sulphate content, mg/kg Max.) 5.1 (Packing) |
| 2247 |
Samridhi Test House Pvt. Ltd.
| 8184706
| IS 12818 (2010) |
Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision) |
All Grade / Type / Size / Designation |
11800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.6(Vicat Softening Temperature
IS 12235 (Part 2).) |
- |
600 |
|
- |
| 9.5(Tensile Strength
IS 12235(Part 13)) |
- |
700 |
|
- |
| 9.4 and Table 14(Resistance to External Blows at 0 ?C
IS 12235 (Part 9)) |
- |
600 |
|
- |
| 9.3(Density
IS 12235 (Part 14)) |
- |
400 |
|
- |
| 9.2(Internal Diameter) |
- |
100 |
|
- |
| 9.1( Visual Appearance) |
- |
100 |
|
- |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
100 |
|
- |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
100 |
|
- |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
100 |
|
- |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
100 |
|
- |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
100 |
|
- |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
100 |
|
- |
| 8.4.1 and Table 13
Fig 3B & 4B(Dimensions of sealing elements) |
- |
100 |
|
- |
| 8.4(Sealing rings - Hardness) |
- |
100 |
|
- |
| 8.1 to 8.3 and Table 11 &12
Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES.
IS 554.) |
- |
100 |
|
- |
| 8.1 to 8.3 and Table 11 &12
Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES.
IS 554.) |
- |
100 |
|
- |
| 7.5 and Table 10
Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w)) |
- |
100 |
|
- |
| 7.5 and Table 10
Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.) |
- |
100 |
|
- |
| 7.5 and Table 10
Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.) |
- |
100 |
|
- |
| 7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0)) |
- |
100 |
|
- |
| 7.4 Table 8 & 9
Fig 1(Segmental length, l3) |
- |
100 |
|
- |
| 7.4 Table 8 & 9
Fig 1(Effective length, l2) |
- |
100 |
|
- |
| 7.3.2(Rib height) |
- |
100 |
|
- |
| 7.3.1(No.of Ribs) |
- |
100 |
|
- |
| 7.2 and Table 5, 6 & 7
Fig 1B(Wall thickness, Max) |
- |
100 |
|
- |
| 7.2 and Table 5, 6 & 7
Fig 1B(Wall thickness, Min) |
- |
100 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported)) |
- |
50 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max) |
- |
50 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min) |
- |
50 |
|
- |
| 7.2 and Table 5, 6 & 7
Fig 1B(Mean Outer Diameter of Pipe , Max) |
- |
50 |
|
- |
| 7.2 and Table 5, 6 & 7
Fig 1B(Mean Outer Diameter of Pipe, Min) |
- |
50 |
|
- |
| 7.2 and Table 5, 6 & 7
Fig 1B(Nominal Diameter) |
- |
50 |
|
- |
| 7.2 and Table 5, 6 & 7
Fig 1B(DIMENSIONS - Casing Pipes) |
- |
50 |
|
- |
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B(Wall thickness) |
- |
50 |
|
- |
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B(Mean Outer Diameter over Connection) |
- |
50 |
|
- |
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B(Outer Diameter at any point ) |
- |
50 |
|
- |
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B(Mean Outer Diameter of Pipe) |
- |
50 |
|
- |
| 7.1 and Table 1, 2, 3, & 4
Fig 1A & 1B(Nominal Diameter) |
- |
50 |
|
- |
| 4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content ) |
- |
400 |
|
- |
| 4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating ) |
- |
400 |
|
- |
| 4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the
resin - Annex A ofIS 10151) |
- |
400 |
|
- |
| 5(COLOUR) |
- |
50 |
|
- |
| 8.4(Sealing elements
a. Elastomeric material
b. Shore A hardness of sealing Elements
) |
- |
100 |
|
- |
| 8.4(Width b) |
- |
50 |
|
- |
| 8.3.1
&
8.3.2
(Threading of casing pipe (from 100 to 200 DN Table – 11 & Fig. 3A) & (from 250 to 400 DN Table – 12 & Fig. 4A)
Outside diameter
d1(+0, -0.3)
d2
d3
D1 (+0.3, -0)
D2
D4
D5 (+0.3, -0)
Z
h3 (+0, -0.1)
H4 (+0, -0.1)
) |
- |
100 |
|
- |
| 8.2(Threading of casing pipe As per IS 554 (from 40 to 80mm DN)
Number of threads in 25.4mm
Pitch (P)
Height of thread (h)
Major (Gauge Diameter) d
Pitch(d2)
Minor (d1)
External Thread gauge length
Nominal
No. of turns of thread
max
min
) |
- |
100 |
|
- |
| 7.5.1
7.5.2
(Slot Dimension (Table 10) Fig 2A & 2B
a. Minimum number of slot on the circumference
b. Σa±5%
c. Mean value of approximate free passage area (%) for width of slot (w)
d. Tolerance on width of slot (w)
e. Width of material between slot (b)) |
- |
100 |
|
- |
| 5.0(Colour of Pipes) |
- |
50 |
|
- |
| 9.7(Effect on Water
a) Lead (first extraction)
b) Lead (Third extraction)
c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction)
d) Cadmium (All three extracts)
e) Mercury (All three extracts)
f) Other Toxic Substances
) |
- |
950 |
|
- |
| 4.1.2(K-Value as per IS-4669) |
- |
850 |
|
- |
| 4.1.1
(VCM Content as per IS 10151 (Annex A)) |
- |
650 |
|
- |
| 7.1(Screen Pipes) |
- |
50 |
|
- |
| 11(Marking) |
- |
50 |
|
- |
| 5.1(Materials) |
- |
50 |
|
- |
| 8(Packing) |
- |
50 |
|
- |
| 4.1.3(Cross Chain Length) |
- |
50 |
|
- |
| 7.2(Link Twisted (Cross chain)) |
- |
50 |
|
- |
| 7.3(The Basic chains) |
- |
50 |
|
- |
| 7.9(Case Depth) |
- |
50 |
|
- |
| 8(Marking) |
- |
50 |
|
- |
| Cl 9.7(Effect on Water Lead (first extraction)) |
- |
250 |
|
- |
| Cl 9.7(Effect on Water Lead (third extraction)) |
- |
250 |
|
- |
| Cl 9.7(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction )) |
- |
250 |
|
- |
| Cl 9.7(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction)) |
- |
250 |
|
- |
| Cl 9.7(Effect on Water Mercury (mean of first extraction, second extraction and third extraction)) |
- |
250 |
|
- |
| CL 7.1,7.2(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6)) |
- |
100 |
|
- |
| 9.1(Visual Appearance) |
- |
100 |
|
- |
| 7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0)) |
- |
100 |
|
- |
| 7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0)) |
- |
0 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported)) |
- |
0 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max) |
- |
0 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min) |
- |
0 |
|
- |
| 7.1(Screen Pipes) |
- |
0 |
|
- |
| 11(Marking) |
- |
0 |
|
- |
| 5.1(Materials) |
- |
0 |
|
- |
| 8(Packing) |
- |
0 |
|
- |
| 4.1.3(Cross Chain Length) |
- |
0 |
|
- |
| 7.2(Link Twisted (Cross chain)) |
- |
0 |
|
- |
| 7.3(The Basic chains) |
- |
0 |
|
- |
| 7.9(Case Depth) |
- |
0 |
|
- |
| 8(Marking) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Lead (first extraction)) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Lead (third extraction)) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction )) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction)) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Mercury (mean of first extraction, second extraction and third extraction)) |
- |
0 |
|
- |
| CL 7.1,7.2(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6)) |
- |
0 |
|
- |
| 7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0)) |
- |
0 |
|
- |
| 7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0)) |
- |
0 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported)) |
- |
0 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max) |
- |
0 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min) |
- |
0 |
|
- |
| 7.1(Screen Pipes) |
- |
0 |
|
- |
| 11(Marking) |
- |
0 |
|
- |
| 5.1(Materials) |
- |
0 |
|
- |
| 8(Packing) |
- |
0 |
|
- |
| 4.1.3(Cross Chain Length) |
- |
0 |
|
- |
| 7.2(Link Twisted (Cross chain)) |
- |
0 |
|
- |
| 7.3(The Basic chains) |
- |
0 |
|
- |
| 7.9(Case Depth) |
- |
0 |
|
- |
| 8(Marking) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Lead (first extraction)) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Lead (third extraction)) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction )) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction)) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Mercury (mean of first extraction, second extraction and third extraction)) |
- |
0 |
|
- |
| CL 7.1,7.2(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6)) |
- |
0 |
|
- |
| 7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0)) |
- |
0 |
|
- |
| 7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0)) |
- |
0 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported)) |
- |
0 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max) |
- |
0 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min) |
- |
0 |
|
- |
| 7.1(Screen Pipes) |
- |
0 |
|
- |
| 11(Marking) |
- |
0 |
|
- |
| 5.1(Materials) |
- |
0 |
|
- |
| 8(Packing) |
- |
0 |
|
- |
| 4.1.3(Cross Chain Length) |
- |
0 |
|
- |
| 7.2(Link Twisted (Cross chain)) |
- |
0 |
|
- |
| 7.3(The Basic chains) |
- |
0 |
|
- |
| 7.9(Case Depth) |
- |
0 |
|
- |
| 8(Marking) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Lead (first extraction)) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Lead (third extraction)) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction )) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction)) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Mercury (mean of first extraction, second extraction and third extraction)) |
- |
0 |
|
- |
| CL 7.1,7.2(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6)) |
- |
0 |
|
- |
| 7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0)) |
- |
0 |
|
- |
| 7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0)) |
- |
0 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported)) |
- |
0 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max) |
- |
0 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min) |
- |
0 |
|
- |
| 7.1(Screen Pipes) |
- |
0 |
|
- |
| 11(Marking) |
- |
0 |
|
- |
| 5.1(Materials) |
- |
0 |
|
- |
| 8(Packing) |
- |
0 |
|
- |
| 4.1.3(Cross Chain Length) |
- |
0 |
|
- |
| 7.2(Link Twisted (Cross chain)) |
- |
0 |
|
- |
| 7.3(The Basic chains) |
- |
0 |
|
- |
| 7.9(Case Depth) |
- |
0 |
|
- |
| 8(Marking) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Lead (first extraction)) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Lead (third extraction)) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction )) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction)) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Mercury (mean of first extraction, second extraction and third extraction)) |
- |
0 |
|
- |
| CL 7.1,7.2(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6)) |
- |
0 |
|
- |
| 7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0)) |
- |
0 |
|
- |
| 7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0)) |
- |
0 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported)) |
- |
0 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max) |
- |
0 |
|
- |
| 7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min) |
- |
0 |
|
- |
| 7.1(Screen Pipes) |
- |
0 |
|
- |
| 11(Marking) |
- |
0 |
|
- |
| 5.1(Materials) |
- |
0 |
|
- |
| 8(Packing) |
- |
0 |
|
- |
| 4.1.3(Cross Chain Length) |
- |
0 |
|
- |
| 7.2(Link Twisted (Cross chain)) |
- |
0 |
|
- |
| 7.3(The Basic chains) |
- |
0 |
|
- |
| 7.9(Case Depth) |
- |
0 |
|
- |
| 8(Marking) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Lead (first extraction)) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Lead (third extraction)) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction )) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction)) |
- |
0 |
|
- |
| Cl 9.7(Effect on Water Mercury (mean of first extraction, second extraction and third extraction)) |
- |
0 |
|
- |
| CL 7.1,7.2(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6)) |
- |
0 |
|
- |
| 7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0)) |
- |
0 |
|
- |
|
- |
-
Included w.e.f. 09.06.2026 |
| 2248 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 8442 (2024) |
Stand Post Type Water and Water-cum-Foam Monitor for Fire Fighting - Specification (Second Revision) |
- |
31600 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-3.1(Dimensions of inlet flanges) |
- |
1200 |
|
- |
| Cl-3.2(Monitors) |
- |
1200 |
|
- |
| Cl-3.3(shape of the monitor) |
- |
400 |
|
- |
| Cl-3.4(General) |
- |
400 |
|
- |
| Cl-4, Table-2 (i)(Base flange) |
- |
400 |
|
- |
| Cl-4, Table-2 (ii)(Water barrel/pipes) |
- |
400 |
|
- |
| Cl-4, Table-2 (iii)(Reducer/elbow) |
- |
400 |
|
- |
| Cl-4, Table-2 (iv)(Swivel joint) |
- |
400 |
|
- |
| Cl-4, Table-2 (v)(Lock handle) |
- |
400 |
|
- |
| Cl-4, Table-2 (vi)(Manoeuvring handle) |
- |
400 |
|
- |
| Cl-4, Table-2 (vii)(Worm shaft) |
- |
400 |
|
- |
| Cl-4, Table-2 (viii)(Hand wheel) |
- |
400 |
|
- |
| Cl-4, Table-2 (ix)(Solid jet nozzle/ Jet/spray water or foam nozzle) |
- |
400 |
|
- |
| Cl-4, Table-2 (x)(Stand Post Type Water and Water-cum-Foam Monitor for Fire Fighting — Specification) |
- |
400 |
|
- |
| Cl-4, Table-2 (xi)(Nozzle washer/ O-rings) |
- |
400 |
|
- |
| Cl-4, Table-2 (xii)(Drain valve) |
- |
400 |
|
- |
| Cl-4, Table-2 (xiii)(Pressure gauge) |
- |
400 |
|
- |
| Cl-6(Workmanship and Finish) |
- |
400 |
|
- |
| Cl-7(Anti Corrosive Treatment) |
- |
1000 |
|
- |
| Cl-8(PAINTING) |
- |
400 |
|
- |
| Cl-9.1(Water Monitor) |
- |
4500 |
|
- |
| Cl-9.2.1(water-cum-foam monitor with water foam nozzle) |
- |
14000 |
|
- |
| Cl-9.2.2(water-cum-foam monitor with foam barrel) |
- |
14000 |
|
- |
| Cl-10(LEAKAGE TEST) |
- |
3500 |
|
- |
| Cl-12(Marking) |
- |
100 |
|
- |
| Cl-5(Construction) |
- |
4500 |
|
- |
|
- |
-
Included w.e.f. 13.01.2025 |
| 2249 |
EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD
| 9179706
| IS 5557 : Part 1 (2024) |
All Rubber Gum Boots and Ankle Boots Part 1 Safety and Protective |
ALL |
40000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5(Design) |
- |
250 |
|
- |
| 6(Sizes and Fittines) |
- |
250 |
|
- |
| 7(Consturction) |
- |
250 |
|
- |
| 8.1(Lining Material) |
- |
250 |
|
- |
| 8.2, Table-1 (i)(Width, mm, Min) |
- |
500 |
|
- |
| 8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen)) |
- |
1000 |
|
- |
| 8.3, Table-2 (i)(Sewing thread for piping/binding") |
- |
500 |
|
- |
| 8.4(Use of Rubber material) |
- |
250 |
|
- |
| 8.4.1, Table-3 (i)(Hardness, (IRHD)) |
- |
1000 |
|
- |
| 8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h) |
- |
1500 |
|
- |
| 8.5(Upper material) |
- |
250 |
|
- |
| 8.5.1(Tensile Strength of upper) |
- |
1000 |
|
- |
| 8.5.2(Thickness) |
- |
500 |
|
- |
| 8.5.3(Flexing Resistance) |
- |
1500 |
|
- |
| 8.5.4(Abrasion Resistance) |
- |
1000 |
|
- |
| 8.6.1(Thickness of Outsole) |
- |
250 |
|
- |
| 8.6.2(Tear Strength) |
- |
1000 |
|
- |
| 8.6.3(Abrasion Resistance of Outsole) |
- |
1200 |
|
- |
| 8.6.4(Flexing Resistance) |
- |
500 |
|
- |
| 8.6.5(Inter layer Bond Strength of outsole) |
- |
1000 |
|
- |
| Cl-8.7(Insocks material) |
- |
250 |
|
- |
| 8.7.1(Thickness of Insocks) |
- |
500 |
|
- |
| Cl-8.7.2(Abrasion Resistance of Insock) |
- |
1000 |
|
- |
| Cl-8.8.1(Outsole/Heel) |
- |
1000 |
|
- |
| Cl-8.9(Leak Proof Test) |
- |
1200 |
|
- |
| 8.10(Height of Upper) |
- |
500 |
|
- |
| 8.11(Adhesion Test for Rubberized Textile Upper) |
- |
1000 |
|
- |
| Cl-8.12(Upper Outsole Bond Strength) |
- |
1000 |
|
- |
| Cl-8.13(Internal Length of Toe Cap) |
- |
500 |
|
- |
| Cl-8.14(Impact Resistance of Safety Footwear) |
- |
1000 |
|
- |
| Cl-8.15(Compression Resistance of Safety Footwear) |
- |
1000 |
|
- |
| 8.16(Banned Chemicals) |
- |
15000 |
|
- |
| 8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS)) |
- |
1000 |
|
- |
| 8.17(Steel Floor with Glycerine) |
- |
1000 |
|
- |
| 8.18(Corrosion Resistant Test for Toe Caps) |
- |
1000 |
|
- |
| 9.1(Penetration Resistance) |
- |
1000 |
|
- |
| 9.2(Antistatic Footwear) |
- |
1500 |
|
- |
| 9.3(Flame Resistance Property) |
- |
0 |
|
- |
| 9.4(Electrical Resistance) |
- |
0 |
|
- |
| 9.5(Resistance to Acid and Alkali- Limited contact with chemicals),) |
- |
1000 |
|
- |
| 9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals) |
- |
1000 |
|
- |
| 9.6(Resistance to Fuel Oil) |
- |
1000 |
|
- |
| 11.2(Marking) |
- |
250 |
|
- |
|
- |
-
Included w.e.f. 01.04.2026
Exclusion: "9.3 (Flame Resistance Property)
9.4 (Electrical Resistance)" |
| 2250 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 2266 (2024) |
STEEL WIRE ROPES FOR GENERAL ENGINEERING PURPOSE - SPECIFICATION (Sixth Revision) |
- |
19500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5(Minimum breaking force) |
- |
4000 |
|
- |
| Cl-6(Wire rope) |
- |
6500 |
|
- |
| Cl-7(Construction) |
- |
1500 |
|
- |
| Cl-8.1(Fibre Core) |
- |
2500 |
|
- |
| Cl-8.2(Steel Core) |
- |
2500 |
|
- |
| Cl-9(Joints) |
- |
1500 |
|
- |
| Cl-10(Galvanizing) |
- |
4500 |
|
- |
| Cl-12(Marking) |
- |
500 |
|
- |
| Cl-4(Rope size and Tolerance) |
- |
3500 |
|
- |
| Cl-5(Minimum breaking force) |
- |
0 |
|
- |
| Cl-6(Wire rope) |
- |
0 |
|
- |
| Cl-7(Construction) |
- |
0 |
|
- |
| Cl-8.1(Fibre Core) |
- |
0 |
|
- |
| Cl-8.2(Steel Core) |
- |
0 |
|
- |
| Cl-9(Joints) |
- |
0 |
|
- |
| Cl-10(Galvanizing) |
- |
0 |
|
- |
| Cl-12(Marking) |
- |
0 |
|
- |
| Cl-4(Rope size and Tolerance) |
- |
0 |
|
- |
| Cl-5(Minimum breaking force) |
- |
- |
|
- |
| Cl-6(Wire rope) |
- |
- |
|
- |
| Cl-7(Construction) |
- |
- |
|
- |
| Cl-8.1(Fibre Core) |
- |
- |
|
- |
| Cl-8.2(Steel Core) |
- |
- |
|
- |
| Cl-9(Joints) |
- |
- |
|
- |
| Cl-10(Galvanizing) |
- |
- |
|
- |
| Cl-12(Marking) |
- |
- |
|
- |
| Cl-4(Rope size and Tolerance) |
- |
- |
|
- |
| Cl-6 of IS 1835,(Carban) |
- |
- |
|
- |
| Cl-6 of IS 1835(Manganese) |
- |
- |
|
- |
| Cl-6 of IS 1835(Silicon) |
- |
- |
|
- |
| Cl-6 of IS 1835(Sulphur, Max) |
- |
- |
|
- |
| Cl-6 of IS 1835(Phosphorus, Max) |
- |
- |
|
- |
| Cl-6 of IS 1835(Copper, Max) |
- |
- |
|
- |
| Cl-6 of IS 1835(Nickel, Max) |
- |
- |
|
- |
| Cl-6 of IS 1835(Chromium, Max) |
- |
- |
|
- |
|
- |
-
Included w.e.f 09.02.2026 |
