BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15633 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

2191

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 13238 (2021)

EPOXY BASED ZINC PHOSPHATE PRIMER TWO PACK - SPECIFICATION FIRST REVISION

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Composition)	-	1999.99	-
4.2(Lead Restriction)	-	1000	-
5(Packing and marking)	-	500	-
4.3, Table 1(i) Consistency)	-	500	-
4.3, Table 1(ii) Drying time, Max, h:)	-	2000	-
4.3, Table 1(iii) Finish)	-	500	-
4.3, Table 1(iv) Colour)	-	500	-
4.3, Table 1(v) Dry film thickness per coat:)	-	500	-
4.3, Table 1(vi) Volume solids, percent, Min)	-	1000	-
4.3, Table 1(vii) Flexibility and adhesion: a) Bend test)	-	500	-
4.3, Table 1(vii) Flexibility and adhesion: b) Scratch hardness)	-	500	-
4.3, Table 1(viii) Flash point (for each component))	-	500	-
4.3, Table 1(ix) a) Resistance to humidity)	-	4000	-
4.3, Table 1(ix) b) Resistance to salt spray)	-	2000	-
4.3, Table 1(x) Pot life)	-	1000	-
4.3, Table 1(xi) Mass)	-	500	-
4.3, Table 1(xii) Keeping properties)	-	2000	-
Clause-4.1 (Composition)	-	2000	-
Clause-4.1.1.1(Epoxy resin)	-	1000	-
Clause-4.1.1.2(Zinc phosphate)	-	1000	-
Clause-4.2(Lead Restriction)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (i)(Consistency)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (ii)(Drying time, Max, h:)	-	2000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (iii)(Finish)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (iv)(Colour)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (v)(Dry film thickness per coat:)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (vi)(Volume solids, percent, Min)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (vii), a)(Bend test (with 6.25 mm dia mandrel and type 1 apparatus))	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (vii), b)(Scratch hardness (1 500 g))	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (viii)(Flash point (for each component))	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (ix), a)(Resistance to humidity)	-	4000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (ix), b)(Resistance to salt spray)	-	2000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (x)(Pot life, h, 27 ± 2 °C, Min)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (xi)(Mass, in kg/10 Iitre, Min)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (xii)(Keeping properties)	-	2000	-
Clause-5(Packing and Marking )	-	500	-

-
included w.e.f 24.02.2026

2192

Matrix Test Labs

8138626

IS 302 : Part 2 : Sec 59 (2024)

Household and Similar Electrical Appliances â Safety Part 2 Particular Requirements Section 59 Insect Killers (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-59 : 1999(Radiation Hazards)	-	1000	-
Cl. 31 302-2-59 : 1999(Resistance to Rusting)	-	1000	-
Cl. 30 302-2-59 : 1999(Resistance to Heat Fire & Tracking )	-	1000	-
Cl. 29 302-2-59 : 1999(Clearances, Creepage Distances & Solid insulation )	-	1000	-
Cl. 28 302-2-59 : 1999(Screws & Connections)	-	1000	-
Cl. 27 302-2-59 : 1999(Provision for Earthing )	-	1000	-
Cl. 26 302-2-59 : 1999(Terminals for External conductors )	-	1000	-
(CI. 6 IS 302-2-59 : 1999(Classification )	-	500	-
Cl. 7 302-2-59 : 1999(Marking)	-	500	-
Cl. 8 302-2-59 : 1999(Protection Against Electric Shock )	-	1000	-
Cl. 9 302-2-59 : 1999(Starting of motor operated appliances)	-	500	-
Cl. 10 302-2-59 : 1999(Power Input and Current )	-	1500	-
Cl. 11 302-2-59 : 1999(Temperature Rise)	-	1500	-
Cl. 13 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 14 302-2-59 : 1999(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 15 302-2-59 : 1999(Moisture Resistance Test )	-	1000	-
Cl. 16 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1000	-
Cl. 17 302-2-59 : 1999(Overload Protection of Transformers and Associated Circuit)	-	1000	-
Cl. 18 302-2-59 : 1999(Endurance)	-	0	-
Cl. 20 302-2-59 : 1999(Stability & Mechanical Hazards)	-	1000	-
Cl. 19 302-2-59 : 1999(Abnormal Operation )	-	1500	-
Cl. 21 302-2-59 : 1999(Mechanical strength)	-	1000	-
Cl. 22 302-2-59 : 1999(Construction )	-	1000	-
Cl. 23 302-2-59 : 1999(Internal Wiring)	-	1000	-
Cl. 25 302-2-59 : 1999(Supply Connection & External Flexible Cords)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
27(PROVISION FOR EARTHING)	-	1000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	1000	-
6(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	1000	-
5(General conditions for the tests)	-	500	-
10(Power input and current)	-	1500	-
11(Heating)	-	1500	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(MOISTURE RESISTANCE)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	500	-
11.3(Heating)	-	500	-
20("STABILITY AND MECHANICAL HAZARDS")	-	500	-
19(ABNORMAL OPERATION)	-	1500	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	500	-
23(INTERNAL WIRING)	-	500	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	500	-
4(General)	-	500	-
12(Charging of metal-ion batteries)	-	1000	-
11.7(Heating)	-	500	-
11.8(Heating)	-	500	-

31 Dec, 2029

-
Included w.e.f 09.02.2026 "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Voltage surges) 19.11.4.5 (Injected currents) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Mains signals) 24 (COMPONENTS)"

2193

Shiva Analyticals (India) Private Limited, Bengaluru

6121716

IS 13702 (1993)

Propylene glycol, food grade - Specification

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(DESCRIPTION)	-	100	-
3.2(Identification)	-	1500	-
3.3(Specific Gravity)	-	400	-
3.4(Distillation range)	-	1500	-
3.5 - Table 1 - (i)(Purity of Propylen Glycol)	-	1000	-
3.5 - Table 1 - (ii)(Moisture)	-	400	-
3.5 - Table 1 - (iii)(Arsenic)	-	400	-
3.5 - Table 1 - (iv)(Heavy metals)	-	400	-
3.5 - Table 1 - (v)(Acidity)	-	400	-
3.5 - Table 1 - (vi)(Sulphated ash)	-	400	-
3.5 - Table 1 - (vii)(Presence of other polyhydroxy compounds)	-	1000	-
3.5 - Table 1 - (viii)(Ethylene glycol)	-	1000	-
3.1(DESCRIPTION)	-	0	-
3.2(Identification)	-	0	-
3.3(Specific Gravity)	-	0	-
3.4(Distillation range)	-	0	-
3.5 - Table 1 - (i)(Purity of Propylen Glycol)	-	0	-
3.5 - Table 1 - (ii)(Moisture)	-	0	-
3.5 - Table 1 - (iii)(Arsenic)	-	0	-
3.5 - Table 1 - (iv)(Heavy metals)	-	0	-
3.5 - Table 1 - (v)(Acidity)	-	0	-
3.5 - Table 1 - (vi)(Sulphated ash)	-	0	-
3.5 - Table 1 - (vii)(Presence of other polyhydroxy compounds)	-	0	-
3.5 - Table 1 - (viii)(Ethylene glycol)	-	0	-
3.1(DESCRIPTION)	-	0	-
3.2(Identification)	-	0	-
3.3(Specific Gravity)	-	0	-
3.4(Distillation range)	-	0	-
3.5 - Table 1 - (i)(Purity of Propylen Glycol)	-	0	-
3.5 - Table 1 - (ii)(Moisture)	-	0	-
3.5 - Table 1 - (iii)(Arsenic)	-	0	-
3.5 - Table 1 - (iv)(Heavy metals)	-	0	-
3.5 - Table 1 - (v)(Acidity)	-	0	-
3.5 - Table 1 - (vi)(Sulphated ash)	-	0	-
3.5 - Table 1 - (vii)(Presence of other polyhydroxy compounds)	-	0	-
3.5 - Table 1 - (viii)(Ethylene glycol)	-	0	-
3.1(DESCRIPTION)	-	0	-
3.2(Identification)	-	0	-
3.3(Specific Gravity)	-	0	-
3.4(Distillation range)	-	0	-
3.5 - Table 1 - (i)(Purity of Propylen Glycol)	-	0	-
3.5 - Table 1 - (ii)(Moisture)	-	0	-
3.5 - Table 1 - (iii)(Arsenic)	-	0	-
3.5 - Table 1 - (iv)(Heavy metals)	-	0	-
3.5 - Table 1 - (v)(Acidity)	-	0	-
3.5 - Table 1 - (vi)(Sulphated ash)	-	0	-
3.5 - Table 1 - (vii)(Presence of other polyhydroxy compounds)	-	0	-
3.5 - Table 1 - (viii)(Ethylene glycol)	-	0	-
3.1(DESCRIPTION)	-	0	-
3.2(Identification)	-	0	-
3.3(Specific Gravity)	-	0	-
3.4(Distillation range)	-	0	--
3.5 - Table 1 - (i)(Purity of Propylen Glycol)	-	0	--
3.5 - Table 1 - (ii)(Moisture)	-	0	--
3.5 - Table 1 - (iii)(Arsenic)	-	0	--
3.5 - Table 1 - (iv)(Heavy metals)	-	0	-
3.5 - Table 1 - (v)(Acidity)	-	0	-
3.5 - Table 1 - (vi)(Sulphated ash)	-	0	-
3.5 - Table 1 - (vii)(Presence of other polyhydroxy compounds)	-	0	-
3.5 - Table 1 - (viii)(Ethylene glycol)	-	0	-
3.1(DESCRIPTION)	-	-	-
3.2(Identification)	-	-	-
3.3(Specific Gravity)	-	-	-
3.4(Distillation range)	-	-	-
3.5 - Table 1 - (i)(Purity of Propylen Glycol)	-	-	-
3.5 - Table 1 - (ii)(Moisture)	-	-	-
3.5 - Table 1 - (iii)(Arsenic)	-	-	-
3.5 - Table 1 - (iv)(Heavy metals)	-	-	-
3.5 - Table 1 - (v)(Acidity)	-	-	-
3.5 - Table 1 - (vi)(Sulphated ash)	-	-	-
3.5 - Table 1 - (vii)(Presence of other polyhydroxy compounds)	-	-	-
3.5 - Table 1 - (viii)(Ethylene glycol)	-	-	-

21 Apr, 2028

-
Included w.e.f 07.08.2026 Exclusion: Cl 3.5 - Table 1 - (v) (Acidity)

2194

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

23800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 5.18(linear and angular dimension)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 6.2(harmfull ingress of water)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 8.2(Addition)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 10.1, Table No. -1(power input deviation)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 14(Impulse test voltage)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -19.7(test is repeated with the capacitor short circuited)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -21.1(Mechanical strength)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -22.1(construction)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -22.11(push force applied)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -24.1.2(safety isolating transformer)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -24.1.3(for switches)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -24.1.5(for innterconnection couplers)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -24.4(plug and socket)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -25.8, Table no -11(conductor resistance)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -25.5(dimension for pins)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -27.6(for circuit board)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -29.2(comparative tracking index)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -29.3.3(dry heat test)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -30.2.1(glow wire test)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
Clause No -30.101("incorporate combustible material")	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
15(MOISTURE RESISTANCE)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
18(ENDURANCE)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
28(SCREWS AND CONNECTIONS)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
31(RESISTANCE TO RUSTING)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
22(CONSTRUCTION)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
24(COMPONENTS)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1000	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.
11(Heating)	-	1500	For BIS type test Rs. 23800/- only. For BIS Acceptance test Rs. 13500/- only. For BIS Routine test Rs. 6500/- only. For others type test Rs. 35200/- only.

-
"1 Clause No -19.11.4.1 (electrostatic discharge) Electrostatic discharge Test facility not available 2 Clause No -19.11.4.2 (radiated field) Radiated fields Test facility not available 3 Clause No -19.11.4.3 (fast transient) Fast transient Test facility not available 4 Clause No -19.11.4.4 (Voltage dips and interruption) Voltage dips and interruption Test facility not available 5 Clause No -24.1.4 (for automatic control) For automatics control Test facility not available 6 Clause No -24.1.5 (for innterconnection couplers) For innterconnection couplers Test facility not available 7 19.11.4.5 (Immunity to conducted discharges) Immunity to conducted discharges Test facility not available 8 19.11.4.6 (Class 3 Voltage dips and interruptions) Voltage dips and interruptions Test facility not available 9 19.11.4.7 (Harmonics) Harmonics Test facility not available"

2195

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

8000 View breakup
-

Clause No.	Exclusion	Remark
table 1 sl.no: 01(16 )	-	complete testing charge 8000
table 1 sl.no: 02(20 )	-	complete testing charge 8000
table 1 sl.no: 03(25 )	-	complete testing charge 8000
table 1 sl.no: 04(32 )	-	complete testing charge 8000
table 1 sl.no: 05(40 )	-	complete testing charge 8000
table 1 sl.no: 06(50 )	-	complete testing charge 8000
table 1 sl.no: 07(63 )	-	complete testing charge 8000
table 1 sl.no: 08(75 )	-	complete testing charge 8000
table 1 sl.no: 09(90 )	-	complete testing charge 8000
table 1 sl.no: 10(110 )	-	complete testing charge 8000
table 1 sl.no: 11(125 )	-	complete testing charge 8000
table 1 sl.no: 12(140 )	-	complete testing charge 8000
table 1 sl.no: 13(160 )	-	complete testing charge 8000
table 1 sl.no: 14( 180 )	-	complete testing charge 8000
table 1 sl.no: 15(200 )	-	complete testing charge 8000
table 1 sl.no: 16(225 )	-	complete testing charge 8000
table 1 sl.no: 17(250.0)	-	complete testing charge 8000
table 1 sl.no: 18(280.0)	-	complete testing charge 8000
table 1 sl.no: 19(315.0)	-	complete testing charge 8000
2.1(General)	-	complete testing charge 8000
2.2(Manufacture)	-	complete testing charge 8000
2.2.2, Table 1(Size)	-	complete testing charge 8000
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	complete testing charge 8000
2.2.3( inside diameter of the socket)	-	complete testing charge 8000
2.2.3(socket length)	-	complete testing charge 8000
2.1(General)	-	complete testing charge 8000
2.2(Manufacture)	-	complete testing charge 8000
2.2.2, Table 1(Size)	-	complete testing charge 8000
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	complete testing charge 8000
2.2.3( inside diameter of the socket)	-	complete testing charge 8000
2.2.3(socket length)	-	complete testing charge 8000
6.4 PART-1(Short term hydraulic test)	-	complete testing charge 8000
6.1.1(VCM Content Test)	-	complete testing charge 8000
2.2.2 table 1(Laying Length)	-	complete testing charge 8000
6.4 PART-1(Short term hydraulic test)	-	complete testing charge 8000
6.1.1(VCM Content Test)	-	complete testing charge 8000
2.2.2 table 1(Laying Length)	-	complete testing charge 8000
6.4 PART-1(Short term hydraulic test)	-	complete testing charge 8000
6.1.1(VCM Content Test)	-	complete testing charge 8000
2.2.2 table 1(Laying Length)	-	complete testing charge 8000
6.4 PART-1(Short term hydraulic test)	-	complete testing charge 8000
6.1.1(VCM Content Test)	-	complete testing charge 8000
2.2.2 table 1(Laying Length)	-	complete testing charge 8000
6.4 PART-1(Short term hydraulic test)	-	complete testing charge 8000
6.1.1(VCM Content Test)	-	complete testing charge 8000
2.2.2 table 1(Laying Length)	-	complete testing charge 8000
6.4 PART-1(Short term hydraulic test)	-	complete testing charge 8000
6.1.1(VCM Content Test)	-	complete testing charge 8000
2.2.2 table 1(Laying Length)	-	complete testing charge 8000

-
Included w.e.f 17.02.2026

2196

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

9167906

IS 455 (2015)

Portland slag cement - Specification

All Type

8200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	8200.00	-
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	8200.00	-
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	8200.00	-
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	8200.00	-
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	8200.00	-
7 Table 1 i(Fineness IS 4031(Part 2))	-	8200.00	-
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	8200.00	-
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	8200.00	-
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	8200.00	-
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	8200.00	-
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	8200.00	-
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	8200.00	-
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	8200.00	-
7 Table 1 i(Fineness IS 4031(Part 2))	-	8200.00	-
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	8200.00	-
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 i (Fineness ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Expansion after aeration ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Soundness , Le Chatelier Expansion ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Expansion after aeration ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Soundness , Autoclave Expansion ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 iii a (Setting time Initial))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 iii b (Setting time Final))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 iv a (Compressive Strength 72±1 hr IS))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 iv b (Compressive Strength 168±2 hr ))	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 iv c (Compressive Strength 672±4 hr) )	-	8200.00	-
Cl. 7 Table-2(Cl. 7 Table-2 v (Transverse Strength (Optional) )	-	8200.00	-
11.3(Consistency(IS:4031(Pt-4)-1988)	-	8200.00	-

02 Jun, 2027

-
Included w.e.f. 02.03.2026

2197

LPG Equipment Research Centre (LERC), Bengaluru

6141034

IS 14612 (1999)

Commercial burners using LPG at inlet pressure up to 147.1 k - N/m2 (1500 Gf/cm2) - Specification

Auto LPG Cylinder

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1,12,2,12,3(Marking)	-	0	-
10.1.5(Inner surface in tension)	-	0	-
10.1.5(Outer surface in tension)	-	0	-
10.1.6(Macroscopic Examination On Circumferential Weld )	-	0	-
10.1.6.1(Macroscopic Examination, m1,Through valve boss )	-	0	-
10.1.8(Water Capacity)	-	0	-
10.2.1(Hydrostatic stretch test)	-	0	-
10.1.6.1(Macroscopic Examination, m2,Through valve plate welds)	-	0	-
10.2.2(Burst test)	-	0	-
10.2.3.2(Change in volume,)	-	0	-
10.2.3.3(shall not cause any fragmentation )	-	0	-
10.3(Hydrostatic Test,3 MPa for 60 seconds )	-	0	-
10.4(Pneumatic Leakage Test,2 MPa for 1 minute)	-	0	-
10.6.1(Bonfire Test )	-	0	-
10.6.2(Fatigue Test)	-	0	-
10.6.3(Crash Test)	-	0	-
10.6.4(Strength Assessment)	-	0	-
11(Surface coating and colour)	-	0	-
12.1,12,2,12,3(Marking)	-	0	-
10.1(Inner surface in tension)	-	0	-
10.1(Outer surface in tension)	-	0	-
10.1(Macroscopic Examination)	-	0	-
10.1(On Circumferential Weld )	-	0	-
10.1(On longitudinal Weld)	-	0	-
10.1(m1,Through valve boss )	-	0	-
10.1(m2,Through valve plate welds)	-	0	-
10.1.7(Water Capacity)	-	0	-
10.2(Hydrostatic stretch test)	-	0	-
10.2(Burst test)	-	0	-
10.3(Hydrostatic Test,3 MPa for 60 seconds )	-	0	-
10.4(Pneumatic Leakage Test,2 MPa for 1 minute)	-	0	-
10.6(Type tests)	-	0	-
10.6(Type tests)	-	0	-
10.6(Type tests)	-	0	-
10.6(Type tests)	-	0	-
11(Surface coating and colour)	-	0	-
10.1.6(Macroscopic Examination On longitudinal Weld)	-	0	-
4(Types of Burner)	-	0	-
Section 1(Construction)	-	0	-
5(General )	-	0	-
5.1(The construction of all the parts of the burners shall be sound and of high standard of orkmanship and appropriate finish. The construction shall ensure durability and shall comply with the safety requirements.)	-	0	-
5.2(Rivets, fastening screws, plugs, etc, shall not lead into gas passages, except where adequate provision has been made to ensure permanent gas-tight joints.)	-	0	-
5.3(No pressure regulator shall be included as a part of the burner.)	-	0	-
6(Materials)	-	0	-
6.1( The material used in the construction of the burner or parts of the burner shall be resistant to wear and deterioration occuring in the normal use)	-	0	-
6.2(All copper and copper alloy parts shall pass the mercurous nitrate test (season cracking test) when tested according to the method specified in IS 2305)	-	0	-
6.3(Non-metallic materials normally in contact with the gas shall not change in weight or volume by more than 15 percent after being immersed in pentane or LP gas for 72 h at room temperature, when tested according to Annex A)	-	0	-
6.4(The main body of the burner (including mixer head, mixing tube and burner head) shall be of substantial and durable construction. Metals having a melting point below 510 OC shall not be considered acceptable.)	-	0	-
7(Design for maintenance)	-	0	-
7.1(i) Every part of the burner shall be of such construction as to be secured against displacement, distortion, warping or other damage and shall be supported to maintain a fixed relationship and reasonable conditions of handling and use so as to ensure continued compliance with these requirements. Such parts not permanently secured shall be designed so that they cannot be incorrectly assembled and cannot be improperly located or misaligned in removing or replacing during cleaning or other servicing.)	-	0	-
7.2(Burners and parts of the burners of same type, make, model and rating shah be interchangeable or replaceable without affecting performance.)	-	0	-
7.3(The parts of the burner shall not become disconnected during operation.)	-	0	-
8(Stability: The burner shall be so designed that it remains stable and shall not be easily overturned.)	-	500	-
9(Workmanship and Finish)	-	0	-
9.1(The finish of exposed parts shall be durable, easy to clean and not subject to excessive deterioration in normal use. Parts which come in contact with foodstuffs shall be capable of being hygienically cleaned. The finish shall, on visual examination, show no defects, such as pinholes, blisters, roughness and exposed areas of metal, which might give rise to unduly rapid deterioration in the use. The surface shall also be free from burrs and sharp edges, which might cause injury to the user with normal operation.)	-	0	-
9.2(Except for burners, all other parts, namely springs, screws, nuts and bolts, pipes, pins, etc, which can be removed for maintenance shall be of corrosion resistant material or treated to resist corrosion appropriate to the conditions of use.)	-	0	-
10(Injector Jets)	-	0	-
10.1(The injector jet shall be fixed calibrated type. A jet plate having multiple jets shall also be permitted.)	-	0	-
10.2(Jet plate holder shall be forged from wrought or extruded brass sections (see IS 6912).)	-	0	-
10.3(The total flow through the jet(s) to the burner at 34.323 kN/m’ (0.35 kgf/cm*) in kg/h of LPG shall be declared by the manufacturer.)	-	0	-
11.1( BURNERS: The construction of the burners and the assembly shall allow their dismantling from the supports easily with or without the use of tools)	-	0	-
11.2(The burner supports shall be rigid and shall be fixed in their place. Their construction shah ensure the stsbility of the burners and shall prevent their undue movement in a horizontal plane.)	-	0	-
11.3(The tightness of the joint from jet/jet plate to burner head in the burner assembly shall not depend upon adhesives or any kind of packing.)	-	0	-
11.4(If primary air regulators are used, they shall be so designed that they are not easily maladjusted by the user and the construction shall be such that primary air adjustment can be made with the burner in place)	-	0	-
11.5(The burner or the appliances manufactured using these burners shah have a provision to protect from cooking vessels resting directly on burner top and smothering the centre flame.)	-	0	-
12(Gas Soundness: The burner assembly from inlet to jet shah be checked at a pneumatic pressure of minimum 686 kPa (7 kgf/cm2) for leakage.)	-	1000	-
13(GAS INLET CONNECTIONS: The inlet to the burner shall be provided with an adaptor machined from extruded brass bar conforming to IS 319. The adaptor shall have threaded inlet configuration to suit the end connection of burner)	-	0	-
14(AIR ADJUSTER: Air adjuster may be provided so that the burner works satisfactorily within the pressure range offered)	-	0	-
15(General conditions of test)	-	0	-
15.1(During the tests the initial adjustment of burner shall not be altered unless specifically required in the test procedure. The burner shall be adjusted and operated in accordance with the instructions given or issued with the burner. Before any tests are made the burner shall be operated at its full working temperature for a sufficient period to remove any temporary protective coating, which might interfere with observations. The gas connections and system up to and including the burners shall be examined for leaks before and after test. The performance test results shall not be valid unless the system is sound. The burner shall be at room temperature at the start of each test unless otherwise stated.)	-	0	-
15.2(The room in which tests are conducted shall be test. The gas/air pressure shall be measured correct to one percent of the normal pressure rating of the burner. adequately ventilated but free from perceptible draughts. The gas/air shall be supplied to the burner through a control valve, an adjustable pressure regulator. A flow meter with a pressure gauge on its inlet shall also be included for gas consumption)	-	0	-
15.3(Except where otherwise stated, the burner shall satisfy the performance requirements using LPG.)	-	0	-
16(Gas Consumption:)	-	1000	-
16.2(The flow through the injector jet(s) at the normal pressure rating of the burner shall be measured with a gas flow meter using compressed air (free from oiY impurities) at room temperature and pressure. This value shall be converted to flow rate at 27 Oc and 760 mm of Hg. Thereafter using 0.75 as multiplying factor, the value of air flow shall be converted to flow of LPG at 27 OC and 760 mm of Hg.)	-	0	-
17(Ignition and Flame Travel: Burner flames shall carry across to all ports on the same burner under normal working condition from full gas rate to 75 percent of full gas rate at inlet pressure from 80 to 120 percent of the rated inlet pressure.)	-	500	-
18(Flame Stability: It shall be possible to operate the burner at full gas rate to 75 percent of full gas rate at gas inlet pressure from 80 to 120 percent of the rated inlet pressure without the flame either extinguishing, blowing off or flashing back and without the formation of soot)	-	500	-
19(Flash Black: A vessel large enough to cover the pan supports filled with water shall be placed on the burner under test. The burner flame shall be ignited while the inlet pressure is maintained at 80 percent of the rated pressure. Water may be added, if required to maintain the level. Gas rate recommended by the manufacturer shall be maintained for half an hour after which the gas input shall be reduced to 75 percent of the full gas rate and then brought back to the full gas rate. The operation shall be repeated five times. No flash back shall occur during the test.)	-	500	-
20(Formation of Soot: A vessel large enough to cover the pan supports shall be filled with water up to a height of 50 mm and placed on the burner under test. The burner shall be ignited with the gas flow maintained at the full gas rate. Water may be added, if required to maintain the level. After one hour, no soot (unburnt carbon) shall have been deposited on the bottom of the vessel. This shall apply for inlet pressures of 80 and 120 percent of the rated inlet pressure)	-	500	-
21(Resistance to draught: There shall be no extinction of the flame of the burner 120 percent of the rated inlet pressure. at rated gas consumption when the burner is placed in a normal (not local&d) current of air with a velocity of 2 m/s, as measured with a rotating vane anemometer. The location of the burner relative to neighbouring walls and the direction of the draught shall be varied to correspond to likely conditions of burner installation. This shall apply for all inlet pressures of 80, 100 and)	-	500	-
22(Combustion: On no account the carbon monoxide/carbon dioxide ratio of exhaust gases, of burner operating at any consumption at which the flame is stable at gas inlet pressure up to 147.1 kN/m2 (1500 gf/cm2) shall exceed 0.02. The carbon monoxide and carbon dioxide contents of the products of combustion shall be determined by the methods capable of accuracy of 0.001 percent and 0.5 percent, respectively of the volume of the sample.)	-	5000	-
23(Thermal Efficiency, Percent)	-	5000	-
24(Marking: Each burner shall be legibly and clearly marked with the following: a) Manufacturer’s name, initials or registered trade-mark; b)Rated pressure in kN/m2 (gf/cm2); c)Rated gas consumption in g/h at rated pressure; d)Batch No; e)The words ‘for use with LPG’; and f)Declared thermal efficiency, if it is higher than specified in 23.1. )	-	0	-
4(Types of Burner)	-	0	-
Section 1(Construction)	-	0	-
5(General )	-	0	-
5.1(The construction of all the parts of the burners shall be sound and of high standard of orkmanship and appropriate finish. The construction shall ensure durability and shall comply with the safety requirements.)	-	0	-
5.2(Rivets, fastening screws, plugs, etc, shall not lead into gas passages, except where adequate provision has been made to ensure permanent gas-tight joints.)	-	0	-
5.3(No pressure regulator shall be included as a part of the burner.)	-	0	-
6(Materials)	-	0	-
6.1( The material used in the construction of the burner or parts of the burner shall be resistant to wear and deterioration occuring in the normal use)	-	0	-
6.2(All copper and copper alloy parts shall pass the mercurous nitrate test (season cracking test) when tested according to the method specified in IS 2305)	-	0	-
6.3(Non-metallic materials normally in contact with the gas shall not change in weight or volume by more than 15 percent after being immersed in pentane or LP gas for 72 h at room temperature, when tested according to Annex A)	-	0	-
6.4(The main body of the burner (including mixer head, mixing tube and burner head) shall be of substantial and durable construction. Metals having a melting point below 510 OC shall not be considered acceptable.)	-	0	-
7(Design for maintenance)	-	0	-
7.1(i) Every part of the burner shall be of such construction as to be secured against displacement, distortion, warping or other damage and shall be supported to maintain a fixed relationship and reasonable conditions of handling and use so as to ensure continued compliance with these requirements. Such parts not permanently secured shall be designed so that they cannot be incorrectly assembled and cannot be improperly located or misaligned in removing or replacing during cleaning or other servicing.)	-	0	-
7.2(Burners and parts of the burners of same type, make, model and rating shah be interchangeable or replaceable without affecting performance.)	-	0	-
7.3(The parts of the burner shall not become disconnected during operation.)	-	0	-
8(Stability: The burner shall be so designed that it remains stable and shall not be easily overturned.)	-	0	-
9(Workmanship and Finish)	-	0	-
9.1(The finish of exposed parts shall be durable, easy to clean and not subject to excessive deterioration in normal use. Parts which come in contact with foodstuffs shall be capable of being hygienically cleaned. The finish shall, on visual examination, show no defects, such as pinholes, blisters, roughness and exposed areas of metal, which might give rise to unduly rapid deterioration in the use. The surface shall also be free from burrs and sharp edges, which might cause injury to the user with normal operation.)	-	0	-
9.2(Except for burners, all other parts, namely springs, screws, nuts and bolts, pipes, pins, etc, which can be removed for maintenance shall be of corrosion resistant material or treated to resist corrosion appropriate to the conditions of use.)	-	0	-
10(Injector Jets)	-	0	-
10.1(The injector jet shall be fixed calibrated type. A jet plate having multiple jets shall also be permitted.)	-	0	-
10.2(Jet plate holder shall be forged from wrought or extruded brass sections (see IS 6912).)	-	0	-
10.3(The total flow through the jet(s) to the burner at 34.323 kN/m’ (0.35 kgf/cm*) in kg/h of LPG shall be declared by the manufacturer.)	-	0	-
11.1( BURNERS: The construction of the burners and the assembly shall allow their dismantling from the supports easily with or without the use of tools)	-	0	-
11.2(The burner supports shall be rigid and shall be fixed in their place. Their construction shah ensure the stsbility of the burners and shall prevent their undue movement in a horizontal plane.)	-	0	-
11.3(The tightness of the joint from jet/jet plate to burner head in the burner assembly shall not depend upon adhesives or any kind of packing.)	-	0	-
11.4(If primary air regulators are used, they shall be so designed that they are not easily maladjusted by the user and the construction shall be such that primary air adjustment can be made with the burner in place)	-	0	-
11.5(The burner or the appliances manufactured using these burners shah have a provision to protect from cooking vessels resting directly on burner top and smothering the centre flame.)	-	0	-
12(Gas Soundness: The burner assembly from inlet to jet shah be checked at a pneumatic pressure of minimum 686 kPa (7 kgf/cm2) for leakage.)	-	0	-
13(GAS INLET CONNECTIONS: The inlet to the burner shall be provided with an adaptor machined from extruded brass bar conforming to IS 319. The adaptor shall have threaded inlet configuration to suit the end connection of burner)	-	0	-
14(AIR ADJUSTER: Air adjuster may be provided so that the burner works satisfactorily within the pressure range offered)	-	0	-
Section 2(Performance )	-	0	-
15(General conditions of test)	-	0	-
15.1(During the tests the initial adjustment of burner shall not be altered unless specifically required in the test procedure. The burner shall be adjusted and operated in accordance with the instructions given or issued with the burner. Before any tests are made the burner shall be operated at its full working temperature for a sufficient period to remove any temporary protective coating, which might interfere with observations. The gas connections and system up to and including the burners shall be examined for leaks before and after test. The performance test results shall not be valid unless the system is sound. The burner shall be at room temperature at the start of each test unless otherwise stated.)	-	0	-
15.2(The room in which tests are conducted shall be test. The gas/air pressure shall be measured correct to one percent of the normal pressure rating of the burner. adequately ventilated but free from perceptible draughts. The gas/air shall be supplied to the burner through a control valve, an adjustable pressure regulator. A flow meter with a pressure gauge on its inlet shall also be included for gas consumption)	-	0	-
15.3(Except where otherwise stated, the burner shall satisfy the performance requirements using LPG.)	-	0	-
16(Gas Consumption:)	-	0	-
16.1(Burner shall permit a gas flow within +lO percent of the manufacturer’s declared gas consumption in kg/ h when tested according to 16.)	-	0	-
16.2(The flow through the injector jet(s) at the normal pressure rating of the burner shall be measured with a gas flow meter using compressed air (free from oiY impurities) at room temperature and pressure. This value shall be converted to flow rate at 27 Oc and 760 mm of Hg. Thereafter using 0.75 as multiplying factor, the value of air flow shall be converted to flow of LPG at 27 OC and 760 mm of Hg.)	-	0	-
17(Ignition and Flame Travel: Burner flames shall carry across to all ports on the same burner under normal working condition from full gas rate to 75 percent of full gas rate at inlet pressure from 80 to 120 percent of the rated inlet pressure.)	-	0	-
18(Flame Stability: It shall be possible to operate the burner at full gas rate to 75 percent of full gas rate at gas inlet pressure from 80 to 120 percent of the rated inlet pressure without the flame either extinguishing, blowing off or flashing back and without the formation of soot)	-	0	-
19(Flash Black: A vessel large enough to cover the pan supports filled with water shall be placed on the burner under test. The burner flame shall be ignited while the inlet pressure is maintained at 80 percent of the rated pressure. Water may be added, if required to maintain the level. Gas rate recommended by the manufacturer shall be maintained for half an hour after which the gas input shall be reduced to 75 percent of the full gas rate and then brought back to the full gas rate. The operation shall be repeated five times. No flash back shall occur during the test.)	-	0	-
20(Formation of Soot: A vessel large enough to cover the pan supports shall be filled with water up to a height of 50 mm and placed on the burner under test. The burner shall be ignited with the gas flow maintained at the full gas rate. Water may be added, if required to maintain the level. After one hour, no soot (unburnt carbon) shall have been deposited on the bottom of the vessel. This shall apply for inlet pressures of 80 and 120 percent of the rated inlet pressure)	-	0	-
21(Resistance to draught: There shall be no extinction of the flame of the burner 120 percent of the rated inlet pressure. at rated gas consumption when the burner is placed in a normal (not local&d) current of air with a velocity of 2 m/s, as measured with a rotating vane anemometer. The location of the burner relative to neighbouring walls and the direction of the draught shall be varied to correspond to likely conditions of burner installation. This shall apply for all inlet pressures of 80, 100 and)	-	0	-
22(Combustion: On no account the carbon monoxide/carbon dioxide ratio of exhaust gases, of burner operating at any consumption at which the flame is stable at gas inlet pressure up to 147.1 kN/m2 (1500 gf/cm2) shall exceed 0.02. The carbon monoxide and carbon dioxide contents of the products of combustion shall be determined by the methods capable of accuracy of 0.001 percent and 0.5 percent, respectively of the volume of the sample.)	-	0	-
23(Thermal Efficiency, Percent)	-	0	-
Section 3(General)	-	0	-
24(Marking: Each burner shall be legibly and clearly marked with the following: a) Manufacturer’s name, initials or registered trade-mark; b)Rated pressure in kN/m2 (gf/cm2); c)Rated gas consumption in g/h at rated pressure; d)Batch No; e)The words ‘for use with LPG’; and f)Declared thermal efficiency, if it is higher than specified in 23.1. )	-	0	-
16.1(Burner shall permit a gas flow within +lO percent of the manufacturer’s declared gas consumption in kg/ h when tested according to 16.)	-	0	-

-
Included w.e.f. 22.01.2026

2198

Urja Metallurgical Services LLP

7194806

IS 1364 : Part 1 (2023)

Hexagon head bolts, screws, and nuts of property grades A and B: Part 1 Hexagon head bolts (Size range M1.6 to M64) (sixth revision)

All Grade / Type / Size / Designation / Class

10300 View breakup
-

Clause No.	Exclusion	Remark
Cl-4(Dimensions)	-	-
Cl-5, Table-7(General requirements)	-	-
Cl-5, Table-7(Thread-Tolerance class)	-	-
Cl-5, Table-7(Mechanical properties- Steel)	-	-
Cl-5, Table-7(Mechanical properties-Stainless steel)	-	-
Cl-5, Table-7(Tolerances-Product grade)	-	-
Cl-5, Table-7(Surface condition -Electroplated coatings)	-	-
Cl-5, Table-7(Surface condition- Non-electrolytically applied zinc flake)	-	-
Cl-5, Table-7(Surface condition - Hot dip galvanized coatings)	-	-
Cl-5, Table-7(Surface integrity- Limits for surface discontinuities)	-	-
Cl-6(Marking)	-	-

23 Dec, 2028

-
Included w.e.f 27.01.2026

2199

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 302 : Part 2 : Sec 13 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 13 Deep Fat Fryers, Frying Pans and Similar Appliances (First Revision)

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	For BIS complete test - Rs. 19500/- only.
8(Protection against access to live parts)	-	1000	For BIS complete test - Rs. 19500/- only.
10(Power input and current)	-	1000	For BIS complete test - Rs. 19500/- only.
11(Heating)	-	1500	For BIS complete test - Rs. 19500/- only.
13.1 &13.2(Leakage current test)	-	1500	For BIS complete test - Rs. 19500/- only.
13.1 &13.3(Electric strength test)	-	1500	For BIS complete test - Rs. 19500/- only.
14(Transient overvoltages)	-	1000	For BIS complete test - Rs. 19500/- only.
15(Moisture resistance)	-	1500	For BIS complete test - Rs. 19500/- only.
15.3(Moisture resistance)	-	1500	For BIS complete test - Rs. 19500/- only.
15.101(Moisture resistance)	-	1000	For BIS complete test - Rs. 19500/- only.
16.1 &16.2(Leakage current test)	-	1500	For BIS complete test - Rs. 19500/- only.
16.1 & 16.3(Electric strength test)	-	1500	For BIS complete test - Rs. 19500/- only.
17(Overload protection of transformers and associated circuits)	-	1500	For BIS complete test - Rs. 19500/- only.
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1500	For BIS complete test - Rs. 19500/- only.
19.101 to to 19.102(Abnormal operation)	-	1500	For BIS complete test - Rs. 19500/- only.
20(Stability and mechanical hazards)	-	1000	For BIS complete test - Rs. 19500/- only.
21(Mechanical strength)	-	1000	For BIS complete test - Rs. 19500/- only.
22(Construction)	-	2000	For BIS complete test - Rs. 19500/- only.
22.101(Construction)	-	1000	For BIS complete test - Rs. 19500/- only.
23(Internal wiring)	-	1500	For BIS complete test - Rs. 19500/- only.
24(Components)	-	1500	For BIS complete test - Rs. 19500/- only.
25("Supply connection and external flexible cords")	-	1500	For BIS complete test - Rs. 19500/- only.
26("Terminals for external conductors")	-	1000	For BIS complete test - Rs. 19500/- only.
27(Provision for earthing)	-	2000	For BIS complete test - Rs. 19500/- only.
28(Screws and connections)	-	1000	For BIS complete test - Rs. 19500/- only.
29("Clearances, creepage distances and solid insulation")	-	1000	For BIS complete test - Rs. 19500/- only.
30(Resistance to heat and fire)	-	2000	For BIS complete test - Rs. 19500/- only.
31(Resistance to rusting)	-	1000	For BIS complete test - Rs. 19500/- only.

-
Included w.e.f 24.03.2026 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC), 32 (Radiation, toxicity and similar hazards)

2200

IEC TEST LABS LLP

8165726

IS 9968 : Part 1 (2025)

Elastomer Insulated Cables - Specification Part 1 for Working Voltages up to and including 1100 volts (Second Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Copper Conductor)	-	1000	-
Cl-4.2(Aluminum Conductor)	-	1000	-
Cl-6.1(Proofed Tape)	-	1000	-
Cl-6.2("Polyethylene Terephthalate (PETP) Tape or Plastic Tape or Any Other Suitable Tape")	-	1000	-
Cl-6.3(Glass Tape)	-	1000	-
Cl-7(Fillers)	-	1000	-
Cl-8.1(Textile Braid)	-	1000	-
Cl-8.2(Glass Braid)	-	1000	-
Cl-9.1(General Service Insulated Cables and Flexible Cords)	-	1000	-
Cl-9.2(Heat Resisting Insulated Cables)	-	1000	-
Cl-9.3(Silicon Rubber Insulated Cable)	-	1000	-
Cl-10.1(Preservative Compound)	-	1000	-
Cl-10.2(Varnish)	-	1000	-
Cl-12(separator tape)	-	1000	-
Cl-14(Core Identification)	-	1000	-
Cl-18(Laying UP of Cores)	-	1000	-
Cl-19(Binder Tape)	-	1000	-
Cl-20.2(Thickness of Sheath)	-	1000	-
Cl-20.3(Tolerance on Thickness of Sheath)	-	1000	-
Cl-20.4(Colour)	-	1000	-
Cl-22.1 (i) (a)(Conductor resistance test)	-	1000	-
Cl-22.1 (i) (b)(High voltage test or spark test.)	-	2000	-
Cl-22.1 (ii) (a)(Annealing test (for copper);)	-	1000	-
Cl-22.1 (ii) (b)(Tensile Test ((for aluminium);)	-	1000	-
Cl-22.1 (ii) (c)(Wrapping test (for aluminium);)	-	1000	-
Cl-22.1 (ii) (f)(Tensile strength and elongation at break of insulation and sheath)	-	1000	-
Cl-22.1 (ii) (g)(Hot set test for insulation and sheath)	-	2000	-
Cl-22.1 (ii) (h)(High voltage test)	-	2000	-
Cl-22.1 (ii) (i)(Insulation resistance test)	-	2000	-
Cl-22.1 (iii) (a)(Persulphate test (for tinned copper);)	-	2000	-
Cl-22.1 (iii) (f)(Test for thickness of insulation and sheath and overall diameter)	-	1000	-
Electrical(Tensile strength and elongation at break)	-	1000	-
Cl-22.1 (iii) (g), 2(Ageing in air oven)	-	5000	-
Cl-22.1 (iii) (g), 3(Ageing in air bomb)	-	5000	-
Cl-22.1 (iii) (g), 4(Ageing In oxygen bomb)	-	5000	-
Cl-22.1 (iii) (g), 5(Hot set)	-	2000	-
Cl-22.1 (iii) (g), 6(Oil resistance;)	-	2000	-
Cl-22.1 (iii) (g), 7(Tear resistance)	-	2000	-
Cl-22.1 (iii) (i)(High voltage (water immersion) test;)	-	2000	-
Cl-22.1 (iii) (j)(Flammability test)	-	1000	-
Cl-22.1 (iii) (k)(Water absorption test (for insulation as applicable))	-	5000	-
Cl-24.1(Manufacturer’s Identification)	-	1000	-
Cl-25(Packing and Morning)	-	1000	-

07 Sep, 2029

-
included w.e.f 09.02.2026

2201

MORBI TEST HOUSE LLP

7195306

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

All Grade / Type / Size / Designation

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(Workmanship & Finish)	-	200	-
9.2(Workmanship & Finish)	-	200	-
9.3(Workmanship & Finish)	-	200	-
11.1(Dimensions - Height)	-	1000	-
11.1(Dimensions - Width)	-	1000	-
11.1(Dimensions - Thickness)	-	1000	-
11.1(Dimensions - Variation in thickness)	-	1000	-
11.1(Dimensions - Squareness)	-	1000	-
11.12(End immersion test)	-	1500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	1000	-
4(GRADE)	-	200	-
4(TYPE)	-	200	-
5(SIZES)	-	200	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	1000	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	1000	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	1000	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	1000	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	1000	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	1000	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	1000	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	1000	-
9.1(WORKMANSHIP AND FINISH)	-	200	-
9.2(WORKMANSHIP AND FINISH)	-	200	-
9.3(WORKMANSHIP AND FINISH)	-	200	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.3(Local Planeness Test)	-	1000	-
11.4(Impact Indentation Test)	-	1500	-
11.4(Impact Indentation Test)	-	1500	-
11.5(Flexure Test)	-	1000	-
11.5(Flexure Test)	-	1000	-
11.6(Edge Loading Test)	-	2000	-
11.6(Edge Loading Test)	-	2000	-
11.6(Edge Loading Test)	-	2000	-
11.6(Edge Loading Test)	-	2000	-
11.7.1(Shock Resistance Test)	-	1500	-
11.7.2(Shock Resistance Test)	-	1500	-
11.8(Buckling Test)	-	1000	-
11.8(Buckling Test)	-	1000	-
11.8(Buckling Test)	-	1000	-
11.9.2(Slamming Test)	-	1000	-
11.9.3(Slamming Test)	-	1000	-
11.10(Misuse Test)	-	1500	-
11.11(Varying Humidity Test)	-	2500	-
11.11(Varying Humidity Test)	-	2500	-
11.12(End Immersion Test)	-	1500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	2000	-
11.15(Screw Withdrawal Resistance Test)	-	2000	-
Clause 4.2(grades specified)	-	200	-
Clause 5(SIZES)	-	200	-
Clause 6.1.1(species of timber)	-	200	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	200	-
Clause 6.2.1(Plywood)	-	4000	-
Clause 6.2.2(Decorative plywood)	-	4000	-
Clause 6.3(Cross-Bands)	-	1000	-
Clause 6.4.1(Commercial Face Veneers)	-	1000	-
Clause 6.4.2(Decorative Face Veneers)	-	1000	-
Clause 6.6.1(Adhesives)	-	4000	-
Clause 6.7(Particle Board)	-	1000	-
Clause 6.8(Medium density fibre board)	-	1000	-
Clause 6.9(Alternative Materials)	-	1000	-
Clause 7.1(Blockboard Core)	-	1000	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	1000	-
Clause 7.3(Stiles and Rails)	-	1000	-
Clause 7.4(Levelling)	-	1000	-
Clause 7.5(Face Panel)	-	1000	-
Clause 7.6(Lipping)	-	1000	-
Clause 7.7(Rebating)	-	1000	-
Clause 7.8(Opening for Glazing)	-	1000	-
Clause 7.9(Venetian)	-	1000	-
Clause 8.1(Locks)	-	1000	-
Clause 9(WORKMANSHIP AND FINISH)	-	200	-
Clause 10.1(Classification of Tests)	-	200	-
Clause 11.1(Dimensions and Squareness Test)	-	1000	-
Clause 11.2(General Flatness Test)	-	1000	-
Clause 11.3(Local Planeness Test)	-	1000	-
Clause 11.4(Impact Indentation Test)	-	1500	-
Clause 11.5(Flexure Test)	-	1000	-
Clause 11.6(Edge Loading Test)	-	2000	-
Clause 11.7(Shock Resistance Test)	-	1500	-
Clause 11.8(Buckling Resistance Test)	-	1000	-
Clause 11.9(Slamming Test)	-	1000	-
Clause 11.10(Misuse Test)	-	1500	-
Clause 11.11(Varying Humidity Test)	-	2500	-
Clause 11.12(End Immersion Test)	-	1500	-
Clause 11.13(Knife Test)	-	500	-
Clause 11.14(Glue Adhesion Test)	-	1000	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	2000	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 14(Marking)	-	200	-
4(Grade, Type and Construction)	-	1000	-
5(Sizes and Thickness)	-	1000	-
6.1(Timber)	-	200	-
6.2(Plywood for flush door shutter)	-	4000	-
6.3(Cross-Bands )	-	1000	-
6.4.1(Commercial Face Veneers)	-	1000	-
6.4.2(Decorative face veneers)	-	1000	-
6.6(Adhesives)	-	4000	-
6.7(Particle Board)	-	1000	-
6.8(Medium Density Fibre)	-	1000	-
6.9(Alternative Materials)	-	1000	-
7(Construction)	-	500	-
8.1(Locks)	-	200	-
8.2(Other Fittings)	-	1000	-
9(Workmanship and Finish)	-	200	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.3(Local Planeness Test)	-	1000	-
11.4(Impact Indentation Test)	-	1500	-
11.5(Flexure Test)	-	1000	-
11.6(Edge Loading Test)	-	2000	-
11.7(Shock Resistance Test)	-	1500	-
11.8(Buckling Resistance Test)	-	1000	-
11.9(Slamming Test)	-	1000	-
11.1(Misuse Test)	-	1500	-
11.11(Varying Humidity Test)	-	2500	-
11.12(End Immersion Test)	-	1500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	2000	-
14(Marking )	-	200	-
9.1(Workmanship & Finish)	-	200	-
9.2(Workmanship & Finish)	-	200	-
9.3(Workmanship & Finish)	-	200	-
11.1(Dimensions - Height)	-	1000	-
11.1(Dimensions - Width)	-	1000	-
11.1(Dimensions - Thickness)	-	1000	-
11.1(Dimensions - Variation in thickness)	-	1000	-
11.1(Dimensions - Squareness)	-	1000	-
11.12(End immersion test)	-	1500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	1000	-
4(GRADE)	-	200	-
4(TYPE)	-	200	-
5(SIZES)	-	200	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	1000	-
7.1.1(CONSTRUCTION-Blockboard Core)	-	1000	-
7.1.2(CONSTRUCTION-Blockboard Core)	-	1000	-
7.3.2(CONSTRUCTION-Stiles and Rails)	-	1000	-
7.3.2(a)(CONSTRUCTION-Stiles and Rails-Joints)	-	1000	-
7.3.2(b)(CONSTRUCTION-Stiles and Rails-Joints)	-	1000	-
7.3.2(c)(CONSTRUCTION-Stiles and Rails-Joints)	-	1000	-
7.3.3(CONSTRUCTION-Stiles and Rails)	-	1000	-
9.1(WORKMANSHIP AND FINISH)	-	200	-
9.2(WORKMANSHIP AND FINISH)	-	200	-
9.3(WORKMANSHIP AND FINISH)	-	200	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.3(Local Planeness Test)	-	1000	-
11.4(Impact Indentation Test)	-	1500	-
11.4(Impact Indentation Test)	-	1500	-
11.5(Flexure Test)	-	1000	-
11.5(Flexure Test)	-	1000	-
11.6(Edge Loading Test)	-	2000	-
11.6(Edge Loading Test)	-	2000	-
11.6(Edge Loading Test)	-	2000	-
11.6(Edge Loading Test)	-	2000	-
11.7.1(Shock Resistance Test)	-	1500	-
11.7.2(Shock Resistance Test)	-	1500	-
11.8(Buckling Test)	-	1000	-
11.8(Buckling Test)	-	1000	-
11.8(Buckling Test)	-	1000	-
11.9.2(Slamming Test)	-	1000	-
11.9.3(Slamming Test)	-	1000	-
11.10(Misuse Test)	-	1500	-
11.11(Varying Humidity Test)	-	2500	-
11.11(Varying Humidity Test)	-	2500	-
11.12(End Immersion Test)	-	1500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	2000	-
11.15(Screw Withdrawal Resistance Test)	-	2000	-
Clause 4.2(grades specified)	-	200	-
Clause 5(SIZES)	-	200	-
Clause 6.1.1(species of timber)	-	200	-
Clause 6.1.2(list of species)	-	0	-
Clause 6.1.3(moisture content)	-	200	-
Clause 6.2.1(Plywood)	-	4000	-
Clause 6.2.2(Decorative plywood)	-	4000	-
Clause 6.3(Cross-Bands)	-	1000	-
Clause 6.4.1(Commercial Face Veneers)	-	1000	-
Clause 6.4.2(Decorative Face Veneers)	-	1000	-
Clause 6.6.1(Adhesives)	-	4000	-
Clause 6.7(Particle Board)	-	1000	-
Clause 6.8(Medium density fibre board)	-	1000	-
Clause 6.9(Alternative Materials)	-	1000	-
Clause 7.1(Blockboard Core)	-	1000	-
Clause 7.2(Particle Board or Medium Density Fibre)	-	1000	-
Clause 7.3(Stiles and Rails)	-	1000	-
Clause 7.4(Levelling)	-	1000	-
Clause 7.5(Face Panel)	-	1000	-
Clause 7.6(Lipping)	-	1000	-
Clause 7.7(Rebating)	-	1000	-
Clause 7.8(Opening for Glazing)	-	1000	-
Clause 7.9(Venetian)	-	1000	-
Clause 8.1(Locks)	-	1000	-
Clause 9(WORKMANSHIP AND FINISH)	-	200	-
Clause 10.1(Classification of Tests)	-	0	-
Clause 11.1(Dimensions and Squareness Test)	-	1000	-
Clause 11.2(General Flatness Test)	-	1000	-
Clause 11.3(Local Planeness Test)	-	1000	-
Clause 11.4(Impact Indentation Test)	-	1500	-
Clause 11.5(Flexure Test)	-	1000	-
Clause 11.6(Edge Loading Test)	-	2000	-
Clause 11.7(Shock Resistance Test)	-	1500	-
Clause 11.8(Buckling Resistance Test)	-	1000	-
Clause 11.9(Slamming Test)	-	1000	-
Clause 11.10(Misuse Test)	-	1500	-
Clause 11.11(Varying Humidity Test)	-	2500	-
Clause 11.12(End Immersion Test)	-	1500	-
Clause 11.13(Knife Test)	-	500	-
Clause 11.14(Glue Adhesion Test)	-	1000	-
Clause 11.15(Screw Withdrawal Resistance Test)	-	2000	-
Clause 12(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause 14(Marking)	-	200	-
4(Grade, Type and Construction)	-	1000	-
5(Sizes and Thickness)	-	1000	-
6.1(Timber)	-	200	-
6.2(Plywood for flush door shutter)	-	4000	-
6.3(Cross-Bands )	-	1000	-
6.4.1(Commercial Face Veneers)	-	1000	-
6.4.2(Decorative face veneers)	-	1000	-
6.6(Adhesives)	-	4000	-
6.7(Particle Board)	-	1000	-
6.8(Medium Density Fibre)	-	1000	-
6.9(Alternative Materials)	-	1000	-
7(Construction)	-	500	-
8.1(Locks)	-	200	-
8.2(Other Fittings)	-	1000	-
9(Workmanship and Finish)	-	200	-
10(Tests)	-	0	-
11.1(Dimensions and Squareness Test)	-	1000	-
11.2(General Flatness Test)	-	1000	-
11.3(Local Planeness Test)	-	1000	-
11.4(Impact Indentation Test)	-	1500	-
11.5(Flexure Test)	-	1000	-
11.6(Edge Loading Test)	-	2000	-
11.7(Shock Resistance Test)	-	1500	-
11.8(Buckling Resistance Test)	-	1000	-
11.9(Slamming Test)	-	1000	-
11.1(Misuse Test)	-	1500	-
11.11(Varying Humidity Test)	-	2500	-
11.12(End Immersion Test)	-	1500	-
11.13(Knife Test)	-	500	-
11.14(Glue Adhesion Test)	-	1000	-
11.15(Screw Withdrawal Resistance Test)	-	2000	-
14(Marking )	-	200	-

-
Included w.e.f. 22.01.2026 Exclusion: Clause 13 (ADDITIONAL REQUIREMENTS FOR ECO MARK)

2202

National Soil Testing and Research Laboratories, Panchkula

9182936

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

40, 20, 12.5, 10 mm and Fine Aggregate

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1000	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1000	-
5.4.2(a)( Aggregates Impact Value)	-	500	-
5.4.2(b)( Aggregates Impact Value)	-	500	-
5.4.3(a)( Aggregate Abrasion Value)	-	1000	-
5.4.3(b)( Aggregate Abrasion Value)	-	1000	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	500	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	500	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	200	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	500	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	200	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	200	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	500	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	500	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	500	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	500	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	500	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	500	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	500	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	500	-
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate)	-	0	-
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	500	-
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	500	-
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	500	-
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	500	-
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	500	-
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	500	-
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	500	-
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	500	-
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	500	-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	500	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	0	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	500	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	500	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	500	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	500	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	500	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	500	-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	500	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	500	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	500	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	500	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	500	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	500	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	500	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	500	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	500	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	500	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	500	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	1000	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	1500	-
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	1000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	1000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	1000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	1000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	1000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	1000	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	500	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	500	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	500	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	1000	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	1000	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	500	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	1000	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	500	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	500	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	500	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	500	-
5.5(Soundness By Magnesium Sulphate)	-	1000	-
7.2(Moisture Content)	-	500	-
7.2(Bulking Of Fine Aggregate)	-	500	-
7.2(Bulk Density loose)	-	500	-
7.2(Bulk Density Rodded)	-	500	-
5.5(Soundness By Magnesium Sulphate)	-	1000	-
7.2(Moisture Content)	-	500	-
7.2(Bulk Density loose)	-	500	-
7.2(Bulk Density Rodded)	-	500	-
5.3(Elongation Index)	-	500	-
5.3(Flakiness Index)	-	500	-
5.6(Alkali Agregate Reaction )	-	1000	-
5.7 table 3(WaterAbsorption)	-	500	-
5.7 table 3(Specific Gravity)	-	500	-
5.3(Flakiness & Elongation)	-	500	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1000	-
5.7 table 4 (Calcium oxide)	-	1000	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1000	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	500	-
3.2.2 Table 3 ii) IS 1963(Basicity as CaO/SiO2)	-	1500	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	1000	-
Clause 5.6(Nature of Aggregate)	-	1500	-
Clause 5.6(Dissolved Silica)	-	1000	-
Clause 5.6(Reduction in Alkalinity)	-	1000	-
Clause 5.1(General)	-	1500	-
Clause 5.1(General)	-	1500	-
Table 4 Cl. 5.7 (ii)(Total Sulphur as S)	-	1000	-
Table 4 Cl. 5.7 (iii)(Total iron as FeO)	-	1000	-
Table 5 Cl. 5.7 (i)(Calcium oxide as CaO,)	-	1000	-
Table 5 Cl. 5.7 (ii)(Magnesium oxide as MgO)	-	1000	-
Table 5 Cl. 5.7 (iii)(Total iron as FeO)	-	1000	-
Table 5 Cl. 5.7 (iv)(Basicity as CaO/SiO2)	-	1500	-
Table 6 Cl. 5.7 (i)(Calcium oxide as CaO)	-	1000	-
Table 6 Cl. 5.7 (ii)(Total sulphur as S)	-	1000	-
Table 6 Cl. 5.7 (iii)(Total iron as FeO)	-	1000	-
Table 6 Cl. 5.7 (iv)()	-	1000	-
Table 6 Cl. 5.7 (iv)()	-	1000	-
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1000	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1000	-
5.4.2(a)( Aggregates Impact Value)	-	500	-
5.4.2(b)( Aggregates Impact Value)	-	500	-
5.4.3(a)( Aggregate Abrasion Value)	-	1000	-
5.4.3(b)( Aggregate Abrasion Value)	-	1000	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	500	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	500	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	500	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	500	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	500	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	500	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	500	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	500	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	500	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	500	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	500	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	500	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	500	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	500	-
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate)	-	500	-
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	500	-
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	500	-
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	500	-
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	500	-
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	500	-
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	500	-
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	500	-
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	500	-
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	500	-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	500	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	500	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	500	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	500	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	500	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	500	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	500	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	500	-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	500	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	500	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	500	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	500	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	500	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	500	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	500	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	500	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	500	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	1000	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	1000	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	1500	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	1500	-
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	1000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	1000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	1000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	1000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	1000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	500	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	500	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	1000	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	1000	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	1500	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	1500	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	1000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	1000	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	1000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	1000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	1000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	1000	-
5.5(Soundness By Magnesium Sulphate)	-	1500	-
7.2(Moisture Content)	-	500	-
7.2(Bulking Of Fine Aggregate)	-	1000	-
7.2(Bulk Density loose)	-	1000	-
7.2(Bulk Density Rodded)	-	1000	-
5.5(Soundness By Magnesium Sulphate)	-	1500	-
7.2(Moisture Content)	-	500	-
7.2(Bulk Density loose)	-	1000	-
7.2(Bulk Density Rodded)	-	1000	-
5.3(Elongation Index)	-	1000	-
5.3(Flakiness Index)	-	1000	-
5.6(Alkali Agregate Reaction )	-	1500	-
5.7 table 3(WaterAbsorption)	-	500	-
5.7 table 3(Specific Gravity)	-	500	-
5.3(Flakiness & Elongation)	-	1000	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1500	-
5.7 table 4 (Calcium oxide)	-	1000	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1500	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	1000	-
3.2.2 Table 3 ii) IS 1963(Basicity as CaO/SiO2)	-	1500	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	1500	-
Clause 5.6(Nature of Aggregate)	-	1500	-
Clause 5.6(Dissolved Silica)	-	1000	-
Clause 5.6(Reduction in Alkalinity)	-	1500	-
Clause 5.1(General)	-	1500	-
Clause 5.1(General)	-	1500	-
Table 4 Cl. 5.7 (ii)(Total Sulphur as S)	-	1000	-
Table 4 Cl. 5.7 (iii)(Total iron as FeO)	-	1000	-
Table 5 Cl. 5.7 (i)(Calcium oxide as CaO,)	-	1000	-
Table 5 Cl. 5.7 (ii)(Magnesium oxide as MgO)	-	1000	-
Table 5 Cl. 5.7 (iii)(Total iron as FeO)	-	1000	-
Table 5 Cl. 5.7 (iv)(Basicity as CaO/SiO2)	-	1500	-
Table 6 Cl. 5.7 (i)(Calcium oxide as CaO)	-	1000	-
Table 6 Cl. 5.7 (ii)(Total sulphur as S)	-	1000	-
Table 6 Cl. 5.7 (iii)(Total iron as FeO)	-	1000	-
Table 6 Cl. 5.7 (iv)()	-	1000	-
Table 6 Cl. 5.7 (iv)()	-	1000	-
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1000	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1000	-
5.4.2(a)( Aggregates Impact Value)	-	500	-
5.4.2(b)( Aggregates Impact Value)	-	500	-
5.4.3(a)( Aggregate Abrasion Value)	-	1000	-
5.4.3(b)( Aggregate Abrasion Value)	-	1000	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	500	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	500	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	500	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	500	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	500	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	500	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	500	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	500	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	500	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	500	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	500	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	500	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	500	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	500	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	500	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	500	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	500	-
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate)	-	500	-
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	500	-
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	500	-
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	500	-
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	500	-
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	500	-
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	500	-
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	500	-
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	500	-
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	500	-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	500	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	500	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	500	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	500	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	500	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	500	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	500	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	500	-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	500	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	500	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	500	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	500	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	500	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	500	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	500	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	500	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	500	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	500	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	500	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	1500	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	1500	-
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	1000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	1000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	1000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	1000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	1000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	500	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	500	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	1000	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	1000	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	1500	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	1500	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	1000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	1000	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	1000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	1000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	1000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	1000	-
5.5(Soundness By Magnesium Sulphate)	-	1500	-
7.2(Moisture Content)	-	500	-
7.2(Bulking Of Fine Aggregate)	-	1000	-
7.2(Bulk Density loose)	-	1000	-
7.2(Bulk Density Rodded)	-	1000	-
5.5(Soundness By Magnesium Sulphate)	-	1500	-
7.2(Moisture Content)	-	500	-
7.2(Bulk Density loose)	-	1000	-
7.2(Bulk Density Rodded)	-	1000	-
5.3(Elongation Index)	-	1000	-
5.3(Flakiness Index)	-	1000	-
5.6(Alkali Agregate Reaction )	-	1500	-
5.7 table 3(WaterAbsorption)	-	500	-
5.7 table 3(Specific Gravity)	-	500	-
5.3(Flakiness & Elongation)	-	1000	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1500	-
5.7 table 4 (Calcium oxide)	-	1000	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1500	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	1000	-
3.2.2 Table 3 ii) IS 1963(Basicity as CaO/SiO2)	-	1500	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	1500	-
Clause 5.6(Nature of Aggregate)	-	1500	-
Clause 5.6(Dissolved Silica)	-	1000	-
Clause 5.6(Reduction in Alkalinity)	-	1500	-
Clause 5.1(General)	-	1500	-
Clause 5.1(General)	-	1500	-
Table 4 Cl. 5.7 (ii)(Total Sulphur as S)	-	1000	-
Table 4 Cl. 5.7 (iii)(Total iron as FeO)	-	1000	-
Table 5 Cl. 5.7 (i)(Calcium oxide as CaO,)	-	1000	-
Table 5 Cl. 5.7 (ii)(Magnesium oxide as MgO)	-	1000	-
Table 5 Cl. 5.7 (iii)(Total iron as FeO)	-	1000	-
Table 5 Cl. 5.7 (iv)(Basicity as CaO/SiO2)	-	1500	-
Table 6 Cl. 5.7 (i)(Calcium oxide as CaO)	-	1000	-
Table 6 Cl. 5.7 (ii)(Total sulphur as S)	-	1000	-
Table 6 Cl. 5.7 (iii)(Total iron as FeO)	-	1000	-
Table 6 Cl. 5.7 (iv)()	-	1000	-
Table 6 Cl. 5.7 (iv)()	-	1000	-

-
Included w.e.f. 04.06.2026

2203

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 302 : Part 2 : Sec 2 (1997)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 2 vacuum cleaners and water suction cleaning appliances

11750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
6(Classification)	-	500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
7(Marking)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
8(Protection against Access to Live Parts)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
9(Starting Of Motor Operated Appliances)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
10("Power Input & Current")	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
11(Temperature Rise/ Heating)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
15(MOISTURE RESISTANCE)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
17(OVERLOAD PROTECTION)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
19(ABNORMAL OPERATION)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
21(MECHANICAL STRENGTH)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
22(Construction)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
23(INTERNAL WIRING)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
24(COMPONENTS)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
27(PROVISION FOR EARTHING)	-	2000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
28(SCREWS AND CONNECTIONS)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
31(RESISTANCE TO RUSTING)	-	1500	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.
32(RADIATION HAZARDS)	-	1000	For BIS type test - Rs.11750/- only. For BIS Acceptance Tests - Rs.9500/- only. For BIS Routine Test - Rs. 5000/- only. For others type test 17500/- only.

-
"1 19.11.4.7 (Harmonics) Harmonics Test facility not available 2 19.11.4.6 (Class 3 Voltage dips and interruptions) Class 3 Voltage dips and interruptions Test facility not available 3 19.11.4.5 (Immunity to conducted discharges) Immunity to conducted discharges Test facility not available 4 19.11.4.4 (Surge immunity test) Surge immunity test Test facility not available 5 19.11.4.3 (Fast transient bursts) Fast transient bursts Test facility not available 6 19.11.4.2 (Radiated fields) Radiated fields Test facility not available 7 19.11.4.1 (Electrostatic discharges) Electrostatics discharges Test facility not available"

2204

Urja Metallurgical Services LLP

7194806

IS 17876 (2022)

Stainless steel welded pipes and tubes for general service

All Grade / Type / Size / Designation / Class

15500 View breakup
-

Clause No.	Exclusion	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	-
10.1 (Table No.- 4)(Tensile Test,Mpa)	-	-
11(Transverse Tension Test,%)	-	-
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	-
13 (Table No.- 7)(Flange Test-IS 2330)	-	-
14(Reverse Flattaning Test)	-	-
15(Flattaning Test-IS 2328)	-	-
16 (Table No.- 8)(Grain Size,No.-IS 4748)	-	-
18(Leak Tighteness Test)	-	-
19("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	-
20(Eddy current test, Air under water test ,Radiographic tests)	-	-
22(Workmanship, Finish and Appearance)	-	-
23(Repair by Welding or Grinding)	-	-
24 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	-
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	-
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	-
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	-
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	-
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	-
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	-
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	-
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	-
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	-
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	-
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	-
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	-
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	-
"Clause 19 IS 10461(Part 1)"(Corrosion Test)	-	-
Clause 10.1 - Table 4(Tensile Strength)	-	-
Clause 10.1 - Table 4(Yield Strength)	-	-
Clause 10.1 - Table 4(Percent Elongation)	-	-
Clause 11(Transverse Tension Test)	-	-
Clause 12(Hardness Test)	-	-
Clause 13(Flange Test)	-	-
Clause 14(Reverse Flattening Test)	-	-
Clause 15(Flattening Test)	-	-
Clause 16(Grain Size)	-	-
Clause 18()	-	-
"Clause 19 IS 10461(Part 2)"(Corrosion Test)	-	-
Clause 22(Workmanship, Finish & Appearance)	-	-
Clause 24 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	-
8.1 & 8.2 (Table No.- 1)(Vanadium (V))	-	-
8.1 & 8.2 (Table No.- 1)(Tungstun (W))	-	-
8.1 & 8.2 (Table No.- 1)(Tantalum (Ta))	-	-
12.2(Hardness test)	-	-
17(Sampling)	-	-
25(Marking)	-	-
6.7, Table 7, ii)(c) Chromium VI)	-	-

23 Dec, 2028

-
Included w.e.f 27.01.2026 Exclusion: Cl 20 (Eddy current test, Air under water test ,Radiographic tests)

2205

Eureka Analytical Services Private Limited, Bengaluru

6171206

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli)	-	300	-
6.1.2(Coliform)	-	300	-
6.1.3(Faecal Streptococci)	-	500	-
6.1.4(Sulphite Reducing Anaerobe)	-	500	-
6.1.5(Pseudomonas aeruginosa)	-	600	-
6.1.6(Yeast and moould)	-	400	-
6.1.7(Salmonella)	-	550	-
6.1.8(Vibrio Cholera)	-	500	-
6.2/Table 1/i(Colour)	-	200	-
6.2/Table 1/ii(Odour)	-	200	-
6.2/Table 1/iii(Taste)	-	200	-
6.2/Table 1/iv(Turbidity)	-	300	-
6.2/Table 1/v(Total Dissoved)	-	300	-
6.2/Table 1/vi(pH Value)	-	300	-
6.2/Table 2/i(Nitrate)	-	300	-
6.2/Table 2/ii(Nitrite)	-	300	-
6.2/Table 2/iii(Sulphide)	-	300	-
6.2/Table 2/iv(Manganese)	-	300	-
6.2/Table 2/v(Copper)	-	300	-
6.2/Table 2/vi(Fluoride)	-	300	-
6.2/Table 2/vii(Barium)	-	300	-
6.2/Table 2/viii(Antimony)	-	300	-
6.2/Table 2/ix(Borate)	-	300	-
6.2/Table 2/x(Silver)	-	300	-
6.2/Table 2/xi(Chloride)	-	300	-
6.2/Table 2/xii(Sulphate)	-	300	-
6.2/Table 2/xiii(Magnesium)	-	300	-
6.2/Table 2/xiv(Calcium)	-	300	-
6.2/Table 2/xv(Sodium)	-	300	-
6.2/Table 2/xvi(Alkalinity)	-	300	-
6.2/Table 2/xvii(Selenium)	-	300	-
6.2/Table 2/xviii(Mineral Oil)	-	300	-
6.2/Table 2/xix(Phenolic Compounds)	-	300	-
6.2/Table 2/xx(Anionic Surface active agents)	-	300	-
6.2/Table 3/i(Arsenic)	-	300	-
6.2/Table 3/ii(Cadmium)	-	300	-
6.2/Table 3/iii(Cyanide)	-	300	-
6.2/Table 3/iv(Chromium)	-	300	-
6.2/Table 3/v(Mercury)	-	300	-
6.2/Table 3/vi(Lead)	-	300	-
6.2/Table 3/vii(Nickel)	-	300	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	2000	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	2000	-
6.2/Table 3/x(Uranium)	-	1500	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	2000	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	2000	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	2000	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	2000	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	2000	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	2000	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	2000	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	2000	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	2000	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	2000	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	2000	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	2000	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	2000	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	2000	-
Cl- 6.3, Annex N (vi)(Ethion)	-	2000	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	2000	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	2000	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	2000	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	2000	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	2000	-
Cl- 6.3, Annex N (x)(Butachlor)	-	2000	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	2000	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	2000	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	2000	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	2000	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	2000	-
Cl- 6.3, Annex N (xv)(Malathion)	-	2000	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	2000	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	2000	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	2500	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	2500	-
Cl-6.1.3(Staphylococcus aureus)	-	500	-
Cl-6.1.7(Shigella)	-	550	-
Cl-6.1.8(V. parahaemolyticus)	-	500	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	2000	-

02 Aug, 2028

-
Included w.e.f. 01.04.2026

2206

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 6528 (2024)

Stainless steel wire - Specification ( Second Revision )

All grades/ All types

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 6(FREEDOM FROM DEFECTS)	-	500	-
As per clause 7(CARBON)	-	2000	-
As per clause 7(SILICON)	-	2000	-
As per clause 7(MANGANESE)	-	2000	-
As per clause 7(PHOSPHORUS)	-	2000	-
As per clause 7(SULPHUR)	-	2000	-
As per clause 7(CHROMIUM)	-	2000	-
As per clause 16.2(MARKING)	-	500	-
As per clause 15(CORROSION RESISTANCE)	-	2000	-
As per clause 14(FINISH)	-	500	-
As per clause 10.3(TORSION TEST)	-	2000	-
As per clause 10.2(REVERSE BEND TEST)	-	2000	-
As per clause 10(TENSILE TEST)	-	2000	-
As per clause 9(Dimension Tolerance)	-	500	-
As per clause 7(MOLYBEDNUM)	-	2000	-
As per clause 7(NICKEL)	-	2000	-
As per clause 7(NITROGEN)	-	2000	-
As per clause 7(COPPER)	-	2000	-
As per clause 7(NIOBIUM)	-	2000	-
As per clause 7(TITANIUM)	-	2000	-
As per clause 7(ALUMINIUM)	-	2000	-
As per clause 8(HEAT TREATMENT)	-	2000	-
As per Clause 6(FREEDOM FROM DEFECTS)	-	0	-
As per clause 7(CARBON)	-	0	-
As per clause 7(SILICON)	-	0	-
As per clause 7(MANGANESE)	-	0	-
As per clause 7(PHOSPHORUS)	-	0	-
As per clause 7(SULPHUR)	-	0	-
As per clause 7(CHROMIUM)	-	0	-
As per clause 16.2(MARKING)	-	0	-
As per clause 15(CORROSION RESISTANCE)	-	0	-
As per clause 14(FINISH)	-	0	-
As per clause 10.3(TORSION TEST)	-	0	-
As per clause 10.2(REVERSE BEND TEST)	-	0	-
As per clause 10(TENSILE TEST)	-	0	-
As per clause 9(Dimension Tolerance)	-	0	-
As per clause 7(MOLYBEDNUM)	-	0	-
As per clause 7(NICKEL)	-	0	-
As per clause 7(NITROGEN)	-	0	-
As per clause 7(COPPER)	-	0	-
As per clause 7(NIOBIUM)	-	0	-
As per clause 7(TITANIUM)	-	0	-
As per clause 7(ALUMINIUM)	-	0	-
As per clause 8(HEAT TREATMENT)	-	0	-

-
included w.e.f 27.01.2026

2207

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 2932 (2025)

Air Drying Enamel Paint for Architectural and Industrial Applications - Specification (Fifth Revision)

35500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Colour Categories and Wet Opacity)	-	2000	-
Cl-6.1.1(Composition- General)	-	1000	-
Cl-6.1.2(Total Non-Volatile Content)	-	2500	-
Cl-6.2.1(At Delivery)	-	1000	-
Cl-6.2.2(During Storage)	-	1000	-
Cl-6.3(Freedom from Coarse Particles)	-	500	-
Cl-6.4(Skin Formation)	-	999.99	-
Cl-6.5(Thinning Properties)	-	1000	-
Cl-6.6(Application Properties)	-	1000	-
Cl-6.7.2(Optional Durability Requirements)	-	4000	-
Cl-6.7.1, 6.8, Table-2 (i)(a) Consistency)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (i)(b) Viscosity by ford cup No. 4 or 5 at(27 ± 2) ℃, s (seeNote 1))	-	1000	-
Cl-6.7.1, 6.8, Table-2 (ii)(Mass, in kg/10 litre, Min)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (iii)("Drying time, h, Max a) Surface dry")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (iii)("Drying time, h, Max b) Hard dry")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (iii)("Drying time, h, Max c) Tack free")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (iv)(Finish)	-	500	-
Cl-6.7.1, 6.8, Table-2 (v)(Gloss 60°)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (vi)("Fineness of grind, microns, Max (byHegmann gauge, Min scale 0 to 8)")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (vii)(Colour)	-	2000	-
Cl-6.7.1, 6.8, Table-2 (viii)("Flexibility and adhesion a) Scratch hardness after 96 h of air drying at 750 g")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (viii)("Flexibility and adhesion a) Scratch hardness after 96 h of air drying at 750 g")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (viii)("Flexibility and adhesion b) Bend test after 96 h of air drying with 6.25 mm in type 1 apparatus")	-	1000	-
Cl-6.7.1, 6.8, Table-2 (ix)(Flash point)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (x)(Volume solids percent, Min)	-	2000	-
Cl-6.7.1, 6.8, Table-2 (xi)(Resistance to acid (Only for Class B of Type II))	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xii)(Resistance to alkali (Only for Class B of Type II))	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiii)(Accelerated storage stability test)	-	2000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(a) Degree of blistering, less than equal to)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(b) Degree of rusting, less than equal)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(c) Degree of cracking less than equal)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(d) Degree of flaking less than equal)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(e) Degree of chalking less than equal)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(f) Degree of colour change, ΔE, Max)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xiv)(g) Gloss retention 60°, percentage of original, Min)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xv)(Resistance to water for duration of 48 h, percentage of gloss retention in comparisonwith original, Min)	-	1000	-
Cl-6.7.1, 6.8, Table-2 (xvi)(Lead (including compounds of lead), Max)	-	3000	-
Cl-6.7.1, 6.8, Table-2 (xvii)(Volatile organic compound (VOC) gm/l, Max)	-	3000	-
Cl-6.7.1, 6.8, Table-2 (xviii)(Keeping properties)	-	1000	-
Cl-6.9, Table-3 (i)(Resistance to Humidity,test)	-	500	-
Cl-6.9, Table-3 (ii)(Resistance to transformer oil (see IS 335) at 90 ℃for 48 h)	-	500	-
Cl-6.9, Table-3 (iii)("Drying time, h, Max: a) Hard dry at 70 ℃ with 15 min flash")	-	500	-
Cl-6.9, Table-3 (iv)(Gloss 60°, Min.)	-	1000	-
Cl-6.9, Table-3 (v)(Scratch hardness (at load 1.2 kg), after 48 h air drying)	-	1000	-
Cl-6.9, Table-3 (vi) (a)(" Pigment content, percent by mass, Min, (except azure blue, oxford blue, golf red, post office red, and black colours);")	-	1000	-
Cl-6.9, Table-3 (vi) (b)(b) Non-volatile vehicle, percent by mass, Min; and)	-	1000	-
Cl-6.9, Table-3 (vi) (c)(c) Phthalic anhydride content of nonvolatile vehicle, percent by mass, Min.)	-	1000	-
Cl-6.9, Table-3 (vii)(Wet abrasion test)	-	1000	-
Cl-12(Marking)	-	500	-
Cl-5(Colour Categories and Wet Opacity)	-	0	-
Cl-6.1.1(Composition- General)	-	0	-
Cl-6.1.2(Total Non-Volatile Content)	-	0	-
Cl-6.2.1(At Delivery)	-	0	-
Cl-6.2.2(During Storage)	-	0	-
Cl-6.3(Freedom from Coarse Particles)	-	0	-
Cl-6.4(Skin Formation)	-	0	-
Cl-6.5(Thinning Properties)	-	0	-
Cl-6.6(Application Properties)	-	0	-
Cl-6.7.2(Optional Durability Requirements)	-	0	-
Cl-6.7.1, 6.8, Table-2 (i)(a) Consistency)	-	0	-
Cl-6.7.1, 6.8, Table-2 (i)(b) Viscosity by ford cup No. 4 or 5 at(27 ± 2) ℃, s (seeNote 1))	-	0	-
Cl-6.7.1, 6.8, Table-2 (ii)(Mass, in kg/10 litre, Min)	-	0	-
Cl-6.7.1, 6.8, Table-2 (iii)("Drying time, h, Max a) Surface dry")	-	0	-
Cl-6.7.1, 6.8, Table-2 (iii)("Drying time, h, Max b) Hard dry")	-	0	-
Cl-6.7.1, 6.8, Table-2 (iii)("Drying time, h, Max c) Tack free")	-	0	-
Cl-6.7.1, 6.8, Table-2 (iv)(Finish)	-	0	-
Cl-6.7.1, 6.8, Table-2 (v)(Gloss 60°)	-	0	-
Cl-6.7.1, 6.8, Table-2 (vi)("Fineness of grind, microns, Max (byHegmann gauge, Min scale 0 to 8)")	-	0	-
Cl-6.7.1, 6.8, Table-2 (vii)(Colour)	-	0	-
Cl-6.7.1, 6.8, Table-2 (viii)("Flexibility and adhesion a) Scratch hardness after 96 h of air drying at 750 g")	-	0	-
Cl-6.7.1, 6.8, Table-2 (viii)("Flexibility and adhesion a) Scratch hardness after 96 h of air drying at 750 g")	-	0	-
Cl-6.7.1, 6.8, Table-2 (viii)("Flexibility and adhesion b) Bend test after 96 h of air drying with 6.25 mm in type 1 apparatus")	-	0	-
Cl-6.7.1, 6.8, Table-2 (ix)(Flash point)	-	0	-
Cl-6.7.1, 6.8, Table-2 (x)(Volume solids percent, Min)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xi)(Resistance to acid (Only for Class B of Type II))	-	0	-
Cl-6.7.1, 6.8, Table-2 (xii)(Resistance to alkali (Only for Class B of Type II))	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiii)(Accelerated storage stability test)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiv)(a) Degree of blistering, less than equal to)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiv)(b) Degree of rusting, less than equal)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiv)(c) Degree of cracking less than equal)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiv)(d) Degree of flaking less than equal)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiv)(e) Degree of chalking less than equal)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiv)(f) Degree of colour change, ΔE, Max)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xiv)(g) Gloss retention 60°, percentage of original, Min)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xv)(Resistance to water for duration of 48 h, percentage of gloss retention in comparisonwith original, Min)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xvi)(Lead (including compounds of lead), Max)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xvii)(Volatile organic compound (VOC) gm/l, Max)	-	0	-
Cl-6.7.1, 6.8, Table-2 (xviii)(Keeping properties)	-	0	-
Cl-6.9, Table-3 (i)(Resistance to Humidity,test)	-	0	-
Cl-6.9, Table-3 (ii)(Resistance to transformer oil (see IS 335) at 90 ℃for 48 h)	-	0	-
Cl-6.9, Table-3 (iii)("Drying time, h, Max: a) Hard dry at 70 ℃ with 15 min flash")	-	0	-
Cl-6.9, Table-3 (iv)(Gloss 60°, Min.)	-	0	-
Cl-6.9, Table-3 (v)(Scratch hardness (at load 1.2 kg), after 48 h air drying)	-	0	-
Cl-6.9, Table-3 (vi) (a)(" Pigment content, percent by mass, Min, (except azure blue, oxford blue, golf red, post office red, and black colours);")	-	0	-
Cl-6.9, Table-3 (vi) (b)(b) Non-volatile vehicle, percent by mass, Min; and)	-	0	-
Cl-6.9, Table-3 (vi) (c)(c) Phthalic anhydride content of nonvolatile vehicle, percent by mass, Min.)	-	0	-
Cl-6.9, Table-3 (vii)(Wet abrasion test)	-	0	-
Cl-12(Marking)	-	0	-

-
Included w.e.f. 26.02.2026

2208

Samridhi Test House Pvt. Ltd.

8184706

IS 2494 : Part 1 (1994)

V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision)

All Grade / Type / Size / Designation

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.0(Marking)	-	150	-
10.1(Elongation)	-	300	-
10.1(Tensile Strength)	-	300	-
8.0(Transmitting Capacities)	-	200	-
7.2.2(Matched Belts - Code)	-	100	-
7.2.1(Matched Belts - Difference)	-	200	-
7.1(Belt Pitch Length)	-	200	-
6.0(Designation)	-	250	-
5 Table 2B(Cross sectional dimension)	-	50	-
5 Table 2B(Cross sectional dimension)	-	50	-
5 Table 2A(Cross sectional dimension)	-	50	-
5 Table 2A(Cross sectional dimension)	-	50	-
5 Table 2A(Cross sectional dimension)	-	50	-
5 Table 2A(Cross sectional dimension)	-	50	-
5 Table 2A(Cross sectional dimension)	-	50	-
5 Table 2A(Cross sectional dimension)	-	50	-
5 Table 2A(Cross sectional dimension)	-	50	-
5 Table 2A(Cross sectional dimension)	-	50	-
5 Table 2A(Cross sectional dimension)	-	50	-
5 Table 1(Cross sectional dimension)	-	50	-
5 Table 1(Cross sectional dimension)	-	50	-
5 Table 1(Cross sectional dimension)	-	50	-
5 Table 1(Cross sectional dimension)	-	50	-
4.1(Material and Workmanship)	-	150	-
4.1(Material -Reinforcing polyester cord/fabric of the V-belts)	-	200	-
4.1(Material and Workmanship)	-	150	-
7.2(Test Matched Belts)	-	200	-
5 & 11(Test Belt ride position of top surface of belt with respect to top of pully groove.)	-	250	-
Clause 5 Table 1(Nominal Pitch Width (Wp))	-	50	-
Clause 5 Table 1(Nominal Height (T))	-	50	-
Clause 5 Table 1(Nominal Included Angle (A))	-	50	-
Clause 5 Table 1(Nominal Pitch Width (W))	-	50	-
Cl-4.3(Presence of polychloroprene rubber on outside jacket of V-belt)	-	300	-
4.1(Material -Reinforcing polyester cord/fabric of the V-belts)	-	0	-
7.2(Test Matched Belts)	-	0	-
5 & 11(Test Belt ride position of top surface of belt with respect to top of pully groove.)	-	0	-
Clause 5 Table 1(Nominal Pitch Width (Wp))	-	0	-
Clause 5 Table 1(Nominal Height (T))	-	0	-
Clause 5 Table 1(Nominal Included Angle (A))	-	0	-
Clause 5 Table 1(Nominal Pitch Width (W))	-	0	-
Cl-4.3(Presence of polychloroprene rubber on outside jacket of V-belt)	-	0	-

-
-

2209

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 17111 (2025)

HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - BALL AND ROLLER BEARING STEELS ( First Revision )

100Cr6 to X75WCrV18-4-1 / 20Cr3+H to 50CrMo4+H

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-6.3.1(Heat-treatment condition)	-	12000	-
Clause-6.3.2(Particular surface conditions)	-	12000	-
Clause-6.3.3(Traceability of the cast)	-	12000	-
Clause-7.1(General- Requirements)	-	12000	-
Clause-7.2, Table 3(C)	-	12000	-
Clause-7.2, Table 3(Si)	-	12000	-
Clause-7.2, Table 3(Mn)	-	12000	-
Clause-7.2, Table 3(P)	-	12000	-
Clause-7.2, Table 3(S)	-	12000	-
Clause-7.2, Table 3(Cr)	-	12000	-
Clause-7.2, Table 3(Mo)	-	12000	-
Clause-7.2, Table 3(Ni)	-	12000	-
Clause-7.2, Table 3(V)	-	12000	-
Clause-7.2, Table 3(W)	-	12000	-
Clause -7.2, Table-4(Al)	-	12000	-
Clause -7.2, Table-4(Cu)	-	12000	-
Clause-7.3(Hardenability)	-	12000	-
Clause-7.4(Hardness)	-	12000	-
Clause-7.5.1(Austenitic grain size of case-hardening and induction-hardening bearing steels)	-	12000	-
Clause-7.5.2(Spheroidization and distribution of carbides)	-	12000	-
Clause-7.6.1(Microscopic inclusions)	-	12000	-
Clause-7.6.2(Macroscopic inclusions)	-	12000	-
Clause-7.7(Internal soundness)	-	12000	-
Clause-7.8(Surface quality)	-	12000	-
Clause-7.9(Shape, dimensions and tolerances)	-	12000	-
Clause-8.2(Frequency of testing)	-	12000	-
Clause-8.3.1(Verification of the hardenability and hardness)	-	12000	-
Clause-8.3.2(Inspection of the surface quality)	-	12000	-
Clause-8.3.3(Dimensional and shape inspection)	-	12000	-
Clause-9.1(Chemical analysis)	-	12000	-
Clause-9.2(Hardness and hardenability tests)	-	12000	-
Clause-10(Marking)	-	12000	-
Clause-6.3.1(Heat-treatment condition)	-	12000	-
Clause-6.3.2(Particular surface conditions)	-	12000	-
Clause-6.3.3(Traceability of the cast)	-	12000	-
Clause-7.1(General- Requirements)	-	12000	-
Clause-7.2, Table 3(C)	-	12000	-
Clause-7.2, Table 3(Si)	-	12000	-
Clause-7.2, Table 3(Mn)	-	12000	-
Clause-7.2, Table 3(P)	-	12000	-
Clause-7.2, Table 3(S)	-	12000	-
Clause-7.2, Table 3(Cr)	-	12000	-
Clause-7.2, Table 3(Mo)	-	12000	-
Clause-7.2, Table 3(Ni)	-	12000	-
Clause-7.2, Table 3(V)	-	12000	-
Clause-7.2, Table 3(W)	-	12000	-
Clause -7.2, Table-4(Al)	-	12000	-
Clause -7.2, Table-4(Cu)	-	12000	-
Clause-7.3(Hardenability)	-	12000	-
Clause-7.4(Hardness)	-	12000	-
Clause-7.5.1(Austenitic grain size of case-hardening and induction-hardening bearing steels)	-	12000	-
Clause-7.5.2(Spheroidization and distribution of carbides)	-	12000	-
Clause-7.6.1(Microscopic inclusions)	-	12000	-
Clause-7.6.2(Macroscopic inclusions)	-	12000	-
Clause-7.7(Internal soundness)	-	12000	-
Clause-7.8(Surface quality)	-	12000	-
Clause-7.9(Shape, dimensions and tolerances)	-	12000	-
Clause-8.2(Frequency of testing)	-	12000	-
Clause-8.3.1(Verification of the hardenability and hardness)	-	12000	-
Clause-8.3.2(Inspection of the surface quality)	-	12000	-
Clause-8.3.3(Dimensional and shape inspection)	-	12000	-
Clause-9.1(Chemical analysis)	-	12000	-
Clause-9.2(Hardness and hardenability tests)	-	12000	-
Clause-10(Marking)	-	12000	-

31 Dec, 2029

-
Included w.e.f 24.02.2026

2210

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 17051 (2018)

Textiles - Bullet resistant jackets - Performance requirements

all

32500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Size and Construction (Manufacture))	-	500	-
5.1.1(Outer carrier fabric)	-	500	-
Table 2 i)(Mass)	-	500	-
Table 2 ii)(Tensile Strength)	-	500	-
Table 2 iii)(Tear Strength)	-	500	-
Table 2 iii)(Flame Resistance Test)	-	2000	-
Table 2 iv)(Resistance to water penetration at hydrostatic pressure head of 30 cm water column height for 30 minutes)	-	2000	-
Table 2 v)(Colour fastness rating to light (change in colour on blue wool))	-	1500	-
5.1.2(Hook and Loop Fasteners (general))	-	500	-
Table 3 i)(Shear Strength, Lengthwise)	-	500	-
Table 3 ii)(Peel Strength)	-	500	-
Table 3 iii)(Endurance Test of 500 cycles of closing and opening operations)	-	1500	-
5.1.3(Pocket with flaps)	-	500	-
5.1.4(Belt/kamarbandh)	-	500	-
5.1.5(Pouches)	-	500	-
5.1.6(Water repellent covers (general))	-	500	-
5.1.6 Table 2, (v)(Resistance to water penetration for water repellent covers)	-	2000	-
5.1.7(Outer carrier to be machine washable)	-	500	-
5.1.8(Quick Release Mechanism (Optional))	-	500	-
5.1.9(Dynamic Weight Distribution System (Optional))	-	500	-
5.1.10(High Buoyancy (Optional))	-	1500	-
5.2.1(General)	-	500	-
5.2.2(Protection Area of SAP)	-	3000	-
5.2.3(Protection Area of HAP)	-	3000	-
5.2.4(Areal Densities of Bullet Resistant Panels)	-	2500	-
8.1(Extreme Temperatures (optional))	-	500	-
8.1.1(High Temperature)	-	1500	-
8.1.2(Low Temperature)	-	12000	-
5.1.1 (i)(Mass,g/m2)	-	5000	-
5.1.1 (ii)(Tensile strength,N,Min: Warp Wise and Weft Wise)	-	500	-
5.1.1 (ii)(Tensile strength,N,Min: Warp Wise and Weft Wise)	-	500	-
5.1.1 (iii)(Tear strength,N,Min: Warp Wise and Weft Wise)	-	500	-
5.1.1 (iv)(Flame Resistance test)	-	2000	-
5.1.1 (v)(Resistance to water penetration at hydrostatic pressure head)	-	2000	-
5.1.1 (vi)(Colour fastness rating to light)	-	1500	-
5.1.2 (i)(shear strength,Lengthwise,g/cm2)	-	500	-
5.1.2 (ii)(Peel strength,g/cm.)	-	500	-
5.1.2 (iii)(Endurance test of 5000 cycles of closing and opening operations)	-	1500	-
5.2.5(Weight of Bullet Resistant Jacket)	-	500	-
5.3(Labelling of ballistic components)	-	500	-

15 Apr, 2027

-
"1 5.2.6 (X-Ray of HAP) X-Ray of HAP Instrument under procurement 2 6.1 (Threat levels) Threat Levels National Forensic Sciences University (NFSU) authorized for Ballistic test 3 6.2 (Behind Armour Blunt Trauma (BFS limit)) Behind Armour Blunt rauma (BFS Limit) National Forensic Sciences University (NFSU) authorized for Ballistic test 4 6.5 (Ballistic Limit (optional)) Ballistic Limit National Forensic Sciences University (NFSU) authorized for Ballistic test 5 6.6 (Shelf Life of SAP and HAP ballistic panels) Shelf Life of SAP and HAP ballistic panels Instrument under procurement 6 8.2 (Fluid Exposure (optional)) Fluid Exposure National Forensic Sciences University (NFSU) authorized for Ballistic test 7 8.2.1 (Water resistance) Water Resistance National Forensic Sciences University (NFSU) authorized for Ballistic test 8 8.2.2 (Sea Water Resistance) Sea Water Resistance National Forensic Sciences University (NFSU) authorized for Ballistic test 9 6.1 (Threat levels) Threat Levels National Forensic Sciences University (NFSU) authorized for Ballistic test 10 6.2 (Behind Armour Blunt Trauma (BFS limit)) Behind Armour Blunt rauma (BFS Limit) National Forensic Sciences University (NFSU) authorized for Ballistic test 11 6.5 (Ballistic Limit (optional)) Ballistic Limit National Forensic Sciences University (NFSU) authorized for Ballistic test 12 6.6 (Shelf Life of SAP and HAP ballistic panels) Shelf Life of SAP and HAP ballistic panels Instrument under procurement 13 8.2 (Fluid Exposure (optional)) Fluid Exposure National Forensic Sciences University (NFSU) authorized for Ballistic test 14 8.2.1 (Water resistance) Water Resistance National Forensic Sciences University (NFSU) authorized for Ballistic test 15 8.2.2 (Sea Water Resistance) Sea Water Resistance National Forensic Sciences University (NFSU) authorized for Ballistic test 16 8.3 (In Transit Conditions (for HAP)) In transit Condition Instrument under procurement 17 8.3.1 (Mechanical Drop Tests) Mechanical Drop Tests Instrument under procurement 18 8.3.2 (Vibration Test) Vibration Test Instrument under procurement"

2211

Global Scientific Solution (P) Ltd.

8189526

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	0	-
Cl-7(Marking and instructions)	-	1000	-
Cl-8(Protection against access to live parts)	-	1000	-
Cl-10(Power input and current)	-	1000	-
Cl-11(Heating)	-	1000	-
Cl-12(Charging of metal-ion batteries)	-	2000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14(Transient overvoltages)	-	1000	-
Cl-15(Moisture resistance)	-	2000	-
Cl-16(Leakage current and electric strength)	-	1000	-
Cl-17(Overload protection of transformers and associated circuits)	-	1000	-
Cl-18(Endurance)	-	2000	-
Cl-19(Abnormal operation)	-	1000	-
Cl-20(Stability and mechanical hazards)	-	1000	-
Cl-21(Mechanical strength)	-	1000	-
Cl-22(Construction)	-	1000	-
Cl-23(Internal wiring)	-	1000	-
Cl-24(Components)	-	1000	-
Cl-25(Supply connection and external flexible cords)	-	1000	-
Cl-26(Terminals for external conductors)	-	1000	-
Cl-27(Provision for earthing)	-	1000	-
Cl-28(Screws and connections)	-	1000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	1000	-
Cl-30(Resistance to heat and fire)	-	2000	-
Cl-31(Resistance to rusting)	-	1000	-
Cl-32(Radiation, toxicity and similar hazards)	-	1000	-

31 Oct, 2028

-
"1 Cl-19.11.4.1 (Electrostatic discharges) electrostatic discharges Complete facility not available 2 Cl-19.11.4.2 (Radiated fields) Radiated fields Complete facility not available 3 Cl-19.11.4.3 (Fast transient bursts) fast transient bursts Complete facility not available 4 Cl-19.11.4.4 (Surge immunity test) surge immunity test Complete facility not available 5 Cl-19.11.4.5 (Immunity to conducted discharges) immunity to conducted discharges Complete facility not available 6 Cl-19.11.4.6 (Class 3 Voltage dips and interruptions) class 3 voltage dips and interruptions Complete facility not available 7 Cl-19.11.4.7 (Harmonics) harmonics Complete facility not available"

2212

Global Scientific Solution (P) Ltd.

8189526

IS 302 : Part 2 : Sec 45 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 45 electric heating tools

34000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	1000	-
6(Classification)	-	1000	-
7(Marking)	-	2000	-
8(Protection against Access to Live Parts)	-	2000	-
9(Starting Of Motor Operated Appliances)	-	2000	-
10("Power Input & Current")	-	3000	-
11(Temperature Rise/ Heating)	-	3000	-
12(Operation Under Overload Condition)	-	3000	-
13(Electric Insulation at Operating Temperature)	-	3000	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	2000	-
15(Moisture Resistance)	-	6000	-
16(Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (After Humidity Treatment))	-	3000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	2000	-
18(Endurance)	-	3000	-
19(Abnormal Operation)	-	3000	-
20(Stability & Mechanical Hazards)	-	2000	-
21(Mechanical strength)	-	2000	-
22(Construction)	-	2000	-
24(Components)	-	2000	-
25(Supply Connection & External Flexible Cords)	-	2000	-
26(Terminals For External Conductors)	-	2000	-
27(Provision For Earthing)	-	2000	-
28(Screws & Connections)	-	2000	-
29(Creepage Distances & Clearances)	-	2000	-
30(Resistance to Heat, Fire and Tracking)	-	3000	-
31(Radiation hazards)	-	2000	-
XXV of Table 101(Resistance to Rusting)	-	3000	-
4(General Requirement)	-	0	-
23(Internal Wiring)	-	2000	-

31 Oct, 2028

-
"1 19.11.4.7 (Harmonics) Harmonics complete facility not available 2 19.11.4.6 (Class 3 Voltage dips and interruptions) voltage dips and interruptions complete facility not available 3 19.11.4.5 (Immunity to conducted discharges) immunity to conducted discharges complete facility not available 4 19.11.4.4 (Surge immunity test) surge immunity test complete facility not available 5 19.11.4.3 (Fast transient bursts) fast transient bursts complete facility not available 6 19.11.4.2 (Radiated fields) Radiated fields complete facility not available 7 19.11.4.1 (Electrostatic discharges) electrostatic discharges complete facility not available.

2213

Global Scientific Solution (P) Ltd.

8189526

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

safety of electric range hoods intended for installing above household cooking ranges, hobs and similar cooking appliances, their rated voltage being not more than 250 V

34000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
Clause No - 6.2(harmfull ingress of water)	-	1000	-
Clause No - 5.18(linear and angular dimension)	-	500	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	1000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	1000	-
Clause No - 8.2(Addition)	-	1000	-
Clause No - 10.1, Table No. -1(power input deviation)	-	1000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	3000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	3000	-
Clause No - 14(Impulse test voltage)	-	3000	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	6000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	1000	-
Clause No -21.1(Mechanical strength)	-	1000	-
Clause No -22.1(construction)	-	2000	-
Clause No -22.11(push force applied)	-	1000	-
Clause No -24.1.2(safety isolating transformer)	-	2000	-
Clause No -24.1.3(for switches)	-	2000	-
Clause No -24.1.4(for automatic control)	-	2000	-
Clause No -24.1.5(for innterconnection couplers)	-	2000	-
Clause No -24.4(plug and socket)	-	3000	-
Clause No -25.8, Table no -11(conductor resistance)	-	2000	-
Clause No -25.5(dimension for pins)	-	1000	-
Clause No -27.6(for circuit board)	-	2000	-
Clause No -29.2(comparative tracking index)	-	2000	-
Clause No -29.3.3(dry heat test)	-	1000	-
Clause No -30.2.1(glow wire test)	-	2000	-
Clause No -30.101("incorporate combustible material")	-	2000	-
15(MOISTURE RESISTANCE)	-	6000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000	-
18(ENDURANCE)	-	0	-
28(SCREWS AND CONNECTIONS)	-	1000	-
31(RESISTANCE TO RUSTING)	-	2000	-
22(CONSTRUCTION)	-	2000	-
24(COMPONENTS)	-	5000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2000	-
11(Heating)	-	2000	-

31 Oct, 2028

-
Included w.e.f 14.01.2026 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Voltage dips and interruption) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)"

2214

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 9968 : Part 1 (2025)

Elastomer Insulated Cables - Specification Part 1 for Working Voltages up to and including 1100 volts (Second Revision)

Elastomer Insulated Cables - Specification - Part 1 for Working Voltages up to and Including 1 100 volts

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Copper Conductor)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-4.2(Aluminum Conductor)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-6.1(Proofed Tape)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-6.2("Polyethylene Terephthalate (PETP) Tape or Plastic Tape or Any Other Suitable Tape")	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-6.3(Glass Tape)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-7(Fillers)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-8.1(Textile Braid)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-8.2(Glass Braid)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-9.1(General Service Insulated Cables and Flexible Cords)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-9.2(Heat Resisting Insulated Cables)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-9.3(Silicon Rubber Insulated Cable)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-10.1(Preservative Compound)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-10.2(Varnish)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-12(separator tape)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-14(Core Identification)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-18(Laying UP of Cores)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-19(Binder Tape)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-20.2(Thickness of Sheath)	-	500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-20.3(Tolerance on Thickness of Sheath)	-	500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-20.4(Colour)	-	500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (i) (a)(Conductor resistance test)	-	2500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (i) (b)(High voltage test or spark test.)	-	3500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (ii) (a)(Annealing test (for copper);)	-	1000	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (ii) (b)(Tensile Test ((for aluminium);)	-	1000	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (ii) (c)(Wrapping test (for aluminium);)	-	1000	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (ii) (f)(Tensile strength and elongation at break of insulation and sheath)	-	3500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (ii) (g)(Hot set test for insulation and sheath)	-	3500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (ii) (h)(High voltage test)	-	3500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (ii) (i)(Insulation resistance test)	-	1500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (iii) (a)(Persulphate test (for tinned copper);)	-	1500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (iii) (f)(Test for thickness of insulation and sheath and overall diameter)	-	1500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Electrical(Tensile strength and elongation at break)	-	1500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (iii) (g), 2(Ageing in air oven)	-	3500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (iii) (g), 3(Ageing in air bomb)	-	3500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (iii) (g), 4(Ageing In oxygen bomb)	-	3500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (iii) (g), 5(Hot set)	-	3500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (iii) (g), 6(Oil resistance;)	-	8500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (iii) (g), 7(Tear resistance)	-	1500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (iii) (i)(High voltage (water immersion) test;)	-	1500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (iii) (j)(Flammability test)	-	1500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-22.1 (iii) (k)(Water absorption test (for insulation as applicable))	-	8500	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-24.1(Manufacturer’s Identification)	-	100	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-25(Packing and Morning)	-	0	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-4.1(Copper Conductor)	-	0	Single core Rs.12,000/- additional each extra core Rs.1,500/-, (10% Discount to BIS)
Cl-4.2(Aluminum Conductor)	-	0	-
Cl-6.1(Proofed Tape)	-	0	-
Cl-6.2("Polyethylene Terephthalate (PETP) Tape or Plastic Tape or Any Other Suitable Tape")	-	0	-
Cl-6.3(Glass Tape)	-	0	-
Cl-7(Fillers)	-	0	-
Cl-8.1(Textile Braid)	-	0	-
Cl-8.2(Glass Braid)	-	0	-
Cl-9.1(General Service Insulated Cables and Flexible Cords)	-	0	-
Cl-9.2(Heat Resisting Insulated Cables)	-	0	-
Cl-9.3(Silicon Rubber Insulated Cable)	-	0	-
Cl-10.1(Preservative Compound)	-	0	-
Cl-10.2(Varnish)	-	0	-
Cl-12(separator tape)	-	0	-
Cl-14(Core Identification)	-	0	-
Cl-18(Laying UP of Cores)	-	0	-
Cl-19(Binder Tape)	-	0	-
Cl-20.2(Thickness of Sheath)	-	0	-
Cl-20.3(Tolerance on Thickness of Sheath)	-	0	-
Cl-20.4(Colour)	-	0	-
Cl-22.1 (i) (a)(Conductor resistance test)	-	0	-
Cl-22.1 (i) (b)(High voltage test or spark test.)	-	0	-
Cl-22.1 (ii) (a)(Annealing test (for copper);)	-	0	-
Cl-22.1 (ii) (b)(Tensile Test ((for aluminium);)	-	0	-
Cl-22.1 (ii) (c)(Wrapping test (for aluminium);)	-	0	-
Cl-22.1 (ii) (f)(Tensile strength and elongation at break of insulation and sheath)	-	0	-
Cl-22.1 (ii) (g)(Hot set test for insulation and sheath)	-	0	-
Cl-22.1 (ii) (h)(High voltage test)	-	0	-
Cl-22.1 (ii) (i)(Insulation resistance test)	-	0	-
Cl-22.1 (iii) (a)(Persulphate test (for tinned copper);)	-	0	-
Cl-22.1 (iii) (f)(Test for thickness of insulation and sheath and overall diameter)	-	0	-
Electrical(Tensile strength and elongation at break)	-	0	-
Cl-22.1 (iii) (g), 2(Ageing in air oven)	-	0	-
Cl-22.1 (iii) (g), 3(Ageing in air bomb)	-	0	-
Cl-22.1 (iii) (g), 4(Ageing In oxygen bomb)	-	0	-
Cl-22.1 (iii) (g), 5(Hot set)	-	0	-
Cl-22.1 (iii) (g), 6(Oil resistance;)	-	0	-
Cl-22.1 (iii) (g), 7(Tear resistance)	-	0	-
Cl-22.1 (iii) (i)(High voltage (water immersion) test;)	-	0	-
Cl-22.1 (iii) (j)(Flammability test)	-	0	-
Cl-22.1 (iii) (k)(Water absorption test (for insulation as applicable))	-	0	-
Cl-24.1(Manufacturer’s Identification)	-	0	-
Cl-25(Packing and Morning)	-	0	-
Cl-4.1(Copper Conductor)	-	0	-
Cl-4.2(Aluminum Conductor)	-	0	-
Cl-6.1(Proofed Tape)	-	0	-
Cl-6.2("Polyethylene Terephthalate (PETP) Tape or Plastic Tape or Any Other Suitable Tape")	-	0	-
Cl-6.3(Glass Tape)	-	0	-
Cl-7(Fillers)	-	0	-
Cl-8.1(Textile Braid)	-	0	-
Cl-8.2(Glass Braid)	-	0	-
Cl-9.1(General Service Insulated Cables and Flexible Cords)	-	0	-
Cl-9.2(Heat Resisting Insulated Cables)	-	0	-
Cl-9.3(Silicon Rubber Insulated Cable)	-	0	-
Cl-10.1(Preservative Compound)	-	0	-
Cl-10.2(Varnish)	-	0	-
Cl-12(separator tape)	-	0	-
Cl-14(Core Identification)	-	0	-
Cl-18(Laying UP of Cores)	-	0	-
Cl-19(Binder Tape)	-	0	-
Cl-20.2(Thickness of Sheath)	-	0	-
Cl-20.3(Tolerance on Thickness of Sheath)	-	0	-
Cl-20.4(Colour)	-	0	-
Cl-22.1 (i) (a)(Conductor resistance test)	-	0	-
Cl-22.1 (i) (b)(High voltage test or spark test.)	-	0	-
Cl-22.1 (ii) (a)(Annealing test (for copper);)	-	0	-
Cl-22.1 (ii) (b)(Tensile Test ((for aluminium);)	-	0	-
Cl-22.1 (ii) (c)(Wrapping test (for aluminium);)	-	0	-
Cl-22.1 (ii) (f)(Tensile strength and elongation at break of insulation and sheath)	-	0	-
Cl-22.1 (ii) (g)(Hot set test for insulation and sheath)	-	0	-
Cl-22.1 (ii) (h)(High voltage test)	-	0	-
Cl-22.1 (ii) (i)(Insulation resistance test)	-	0	-
Cl-22.1 (iii) (a)(Persulphate test (for tinned copper);)	-	0	-
Cl-22.1 (iii) (f)(Test for thickness of insulation and sheath and overall diameter)	-	0	-
Electrical(Tensile strength and elongation at break)	-	0	-
Cl-22.1 (iii) (g), 2(Ageing in air oven)	-	0	-
Cl-22.1 (iii) (g), 3(Ageing in air bomb)	-	0	-
Cl-22.1 (iii) (g), 4(Ageing In oxygen bomb)	-	0	-
Cl-22.1 (iii) (g), 5(Hot set)	-	0	-
Cl-22.1 (iii) (g), 6(Oil resistance;)	-	0	-
Cl-22.1 (iii) (g), 7(Tear resistance)	-	0	-
Cl-22.1 (iii) (i)(High voltage (water immersion) test;)	-	0	-
Cl-22.1 (iii) (j)(Flammability test)	-	0	-
Cl-22.1 (iii) (k)(Water absorption test (for insulation as applicable))	-	0	-
Cl-24.1(Manufacturer’s Identification)	-	0	-
Cl-25(Packing and Morning)	-	0	-
CL. 22.1 (iv) a,(Flexing test for Cords for use with electric iron)	-	0	-

11 Apr, 2028

-
included w.e.f 25.03.2026

2215

Urja Metallurgical Services LLP

7194806

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

All Grade / Type / Size / Designation / Class

8500 View breakup
-

Clause No.	Exclusion	Remark
Clause - 7.1(CARBON)	-	-
Clause - 7.1(SULPHUR)	-	-
Clause - 7.1(PHOSPHURS)	-	-
Clause - 7.1(MANGANESE)	-	-
Clause - 7.1(NITROGEN)	-	-
As per Clause 10(Dimension)	-	-
As per Clause 10.1(Dimension Width)	-	-
As per Clause 10.1(Dimension Thickness)	-	-
As per Clause 10.2(Dimension Length)	-	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	-
As per Clause 11.5(Bend)	-	-
As per Clause 11.6(Camber)	-	-
As per Clause 11.7 (i)(Out of Square)	-	-
As per Clause 11.7 (ii)(Round Corners)	-	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	-
As per Clause 11.7 (ix)(Scarfing pits)	-	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	-
Clause. 13(Macro examination test.)	-	-
Clause. 13(Macro examination test.)	-	-
Clause. 13(Sulphur print.)	-	-
Clause. 13(Inclusion content)	-	-
Clause. 14(Marking)	-	-
Clause.15(Ordering information)	-	-
Clause.6.0(Manufacture)	-	-
Clause.7.1(Silicon)	-	-
Clause.7.1(Carbon Equbalant)	-	-
Clause.7.1(Microalloy element)	-	-

23 Dec, 2028

-
Included w.e.f 27.01.2026 Exclusion: Clause. 13 (Sulphur print.)

2216

QA TESTING LABORATORIES PRIVATE LIMITED, NOIDA

8169906

IS 12931 (1990)

Atrazine WP - Specification

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Description)	-	500	-
3.3 Table 1 i(Atrazine Content)	-	500	-
3.3 Table 1 ii(Sieving requirements material passing through 75 micron IS sieve)	-	500	-
3.3 Table 1 iii(Suspensibility)	-	500	-
3.3 Table 1 iv(Acidity/Alkalinity)	-	500	-
3.3 Table 1 v(Wettability)	-	500	-

05 Apr, 2028

-
Included w.e.f 09.02.2026

2217

QA TESTING LABORATORIES PRIVATE LIMITED, NOIDA

8169906

IS 1065 : Part 2 (2019)

Stable bleaching powder - Specification: Part 2 treatment of water intended for drinking

11900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.3, Table-1, Sr.no. 1(Available Chlorine)	-	400	-
Cl. 5.3, Table-1, Sr.no. 2(Stability, loss of Chlorine on the basis of initial available chlorine)	-	500	-
Cl. 5.3, Table-1, Sr.no. 3(Moisture )	-	300	-
Cl. 5.3, Table-1, Sr.no. 4(Particle size(passing though 1.70 mm I.S. Sieve))	-	500	-
Cl. 5.3, Table-1, Sr.no. 5(Lead(as Pb))	-	300	-
Cl. 5.3, Table-1, Sr.no. 6(Arsenic (as As))	-	300	-
Cl. 5.3, Table-1, Sr.no. 7(Manganese(as Mn))	-	300	-
Cl. 5.3, Table-1, Sr.no. 8(Chromium (as Cr6+))	-	300	-
Cl. 5.3, Table-1, Sr.no. 9(Mercury( as Hg) )	-	300	-
Cl. 5.3, Table-1, Sr.no. 10(Cadmium(as Cd))	-	300	-
Cl. 5.3, Table-1, Sr.no. 11(Selenium (as Se))	-	300	-
Cl. 5.3, Table-1, Sr.no. 1(Available Chlorine)	-	500	-
Cl. 5.3, Table-1, Sr.no. 2(Stability, loss of Chlorine on the basis of initial available chlorine)	-	500	-
Cl. 5.3, Table-1, Sr.no. 3(Moisture )	-	300	-
Cl. 5.3, Table-1, Sr.no. 4(Particle size(passing though 1.70 mm I.S. Sieve))	-	500	-
Cl. 5.3, Table-1, Sr.no. 5(Lead(as Pb))	-	300	-
Cl. 5.3, Table-1, Sr.no. 6(Arsenic (as As))	-	300	-
Cl. 5.3, Table-1, Sr.no. 7(Manganese(as Mn))	-	300	-
Cl. 5.3, Table-1, Sr.no. 8(Chromium (as Cr6+))	-	300	-
Cl. 5.3, Table-1, Sr.no. 9(Mercury( as Hg) )	-	300	-
Cl. 5.3, Table-1, Sr.no. 10(Cadmium(as Cd))	-	300	-
Cl. 5.3, Table-1, Sr.no. 11(Selenium (as Se))	-	300	-
Clause 5.4(Keeping Quality )	-	400	-
Clause 5.2(Description)	-	200	-
Clause 5.3 Table 1(Selenium)	-	300	-
Clause 5.3 Table 1(Cadmium)	-	300	-
Clause 5.3 Table 1(Mercury)	-	300	-
Clause 5.3 Table 1(Chromium)	-	300	-
Clause 5.3 Table 1(Manganese)	-	300	-
Clause 5.3 Table 1(Arsenic)	-	300	-
Clause 5.3 Table 1(Lead)	-	300	-
Clause 5.3 Table 1(Particle size)	-	500	-
Clause 5.3 Table 1(Moisture)	-	300	-
Clause 5.3 Table 1(Stability)	-	200	-
Clause 5.3 Table 1(Available Chlorine)	-	300	-
Clause 5.2(Description)	-	200	-

05 Apr, 2028

-
Included w.e.f. 30.01.2026

2218

ACCURATE TEST SOLUTIONS LLP

8192806

IS 14182 (1994)

Solvent cement for use with unplasticized polyvinyl chloride plastic pipe and fittings - Specifications

Regular, medium and heavy bodied

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 - Table 1 - v-a(Chemical Resistance - Change in mass, increase)	-	0	-
4.1 - Table 1 - v-a(Chemical Resistance - Change in mass, Decrease)	-	0	-
4.1 - Table 1 - v-b(Chemical Resistance - Change in flexural yield strength, Increase)	-	0	-
4.1 - Table 1 - v-b(Chemical Resistance - Change in flexural yield strength, Decrease)	-	0	-
4.2(Shall be thixotropic and consist substantially of solvents that will swell plastisized PVC polymers and stabilizers)	-	1000	-
4.3(Shall be capable of application by brush and shall contain no lumps or foreign matter or macroscopic undissolved particles that will adversely affect the ultimate joint strength or chemical resistance of the material )	-	1000	-
4.4(Shall not show gelation and no evidence of stratification or separation that cannot be removed by stirring)	-	1000	-
4.5(When used under the conditions for which they are designed, non metallic materials in contact with or likely to come in contact with potable water shall not constitute a toxic hazard , shall not support microbial growth and shall not give rise to unpleasant taste or odour, cloudiness or discolouration of the water)	-	8000	-
4.6(Solvents systems consisting of blends of tetrahydrofuran and cyclohexanone have been found to be acceptable)	-	1000	-
4.7(Vinyl Chloride Polymer content - Annex A)	-	3000	-
4.8(Dissolution - Capable of dissolving an additional unplastisized PVC granular, powder compound or resin)	-	2000	-
4.5(REQUIREMENTS)	-	0	-
4.6(REQUIREMENTS)	-	0	-
4.7 and 6.1(REQUIREMENTS - Vinyl Chloride Polymer Content)	-	0	-
4.8(Dissolution)	-	0	-
4.9 and 6.1(Viscosity)	-	6000	-
4.9 and 6.1(Viscosity - Regular)	-	0	-
4.9 and 6.1(Viscosity - Medium)	-	0	-
4.9 and 6.1(Viscosity - Heavy )	-	0	-
4.10 and 6.1(Lap Shear Strength - After 2 h curing time)	-	2000	-
4.10 and 6.1(Lap Shear Strength - After 10 h curing time)	-	3000	-
4.10 and 6.1(Lap Shear Strength - After 72 h curing time)	-	4000	-
4.11 and 6.1(Hydrostatic Burst Strength - After 2 h curing time)	-	3000	-
4.7(Vinyl Chloride Polymer Content)	-	0	-
4.8(Dissolution)	-	0	-
4.9(Viscosity)	-	0	-
4.10(Lap Shear Strength)	-	0	-
4.11(Hydrostatic Burst Strength)	-	0	-
4.12(Shelf Life)	-	0	-
6.1(Test)	-	0	-
6.2(Quality of Reagants)	-	0	-
7(Packing and Marking)	-	0	-
4.1 - Table 1 - v-a(Chemical Resistance - Change in mass, increase)	-	-	-
4.1 - Table 1 - v-a(Chemical Resistance - Change in mass, Decrease)	-	-	-
4.1 - Table 1 - v-b(Chemical Resistance - Change in flexural yield strength, Increase)	-	-	-
4.1 - Table 1 - v-b(Chemical Resistance - Change in flexural yield strength, Decrease)	-	-	-
4.2(Shall be thixotropic and consist substantially of solvents that will swell plastisized PVC polymers and stabilizers)	-	-	-
4.3(Shall be capable of application by brush and shall contain no lumps or foreign matter or macroscopic undissolved particles that will adversely affect the ultimate joint strength or chemical resistance of the material )	-	-	-
4.4(Shall not show gelation and no evidence of stratification or separation that cannot be removed by stirring)	-	-	-
4.5(When used under the conditions for which they are designed, non metallic materials in contact with or likely to come in contact with potable water shall not constitute a toxic hazard , shall not support microbial growth and shall not give rise to unpleasant taste or odour, cloudiness or discolouration of the water)	-	-	-
4.6(Solvents systems consisting of blends of tetrahydrofuran and cyclohexanone have been found to be acceptable)	-	-	-
4.7(Vinyl Chloride Polymer content - Annex A)	-	-	-
4.8(Dissolution - Capable of dissolving an additional unplastisized PVC granular, powder compound or resin)	-	-	-
4.5(REQUIREMENTS)	-	-	-
4.6(REQUIREMENTS)	-	-	-
4.7 and 6.1(REQUIREMENTS - Vinyl Chloride Polymer Content)	-	-	-
4.8(Dissolution)	-	-	-
4.9 and 6.1(Viscosity)	-	-	-
4.9 and 6.1(Viscosity - Regular)	-	-	-
4.9 and 6.1(Viscosity - Medium)	-	-	-
4.9 and 6.1(Viscosity - Heavy )	-	-	-
4.10 and 6.1(Lap Shear Strength - After 2 h curing time)	-	-	-
4.10 and 6.1(Lap Shear Strength - After 10 h curing time)	-	-	-
4.10 and 6.1(Lap Shear Strength - After 72 h curing time)	-	-	-
4.11 and 6.1(Hydrostatic Burst Strength - After 2 h curing time)	-	-	-
4.7(Vinyl Chloride Polymer Content)	-	-	-
4.8(Dissolution)	-	-	-
4.9(Viscosity)	-	-	-
4.10(Lap Shear Strength)	-	-	-
4.11(Hydrostatic Burst Strength)	-	-	-
4.12(Shelf Life)	-	-	-
6.1(Test)	-	-	-
6.2(Quality of Reagants)	-	-	-
7(Packing and Marking)	-	-	-

08 Dec, 2028

-
Included w.e.f 01.04.2026

2219

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	500	For BIS complete type test -Rs. 14000/- only
Cl-7(Marking and instructions)	-	1000	For BIS complete type test -Rs. 14000/- only
Cl-8(Protection against access to live parts)	-	1000	For BIS complete type test -Rs. 14000/- only
Cl-10(Power input and current)	-	1000	For BIS complete type test -Rs. 14000/- only
Cl-11(Heating)	-	1000	For BIS complete type test -Rs. 14000/- only
Cl-12(Charging of metal-ion batteries)	-	1000	For BIS complete type test -Rs. 14000/- only
Cl-13(Leakage current and electric strength at operating temperature)	-	1500	For BIS complete type test -Rs. 14000/- only
Cl-14(Transient overvoltages)	-	1000	For BIS complete type test -Rs. 14000/- only
Cl-15(Moisture resistance)	-	1500	For BIS complete type test -Rs. 14000/- only
Cl-16(Leakage current and electric strength)	-	1500	For BIS complete type test -Rs. 14000/- only
Cl-17(Overload protection of transformers and associated circuits)	-	1000	For BIS complete type test -Rs. 14000/- only
Cl-18(Endurance)	-	1000	For BIS complete type test -Rs. 14000/- only
Cl-19(Abnormal operation)	-	2000	For BIS complete type test -Rs. 14000/- only
Cl-20(Stability and mechanical hazards)	-	1000	For BIS complete type test -Rs. 14000/- only
Cl-21(Mechanical strength)	-	1000	For BIS complete type test -Rs. 14000/- only
Cl-22(Construction)	-	2000	For BIS complete type test -Rs. 14000/- only
Cl-23(Internal wiring)	-	1500	For BIS complete type test -Rs. 14000/- only
Cl-24(Components)	-	2000	For BIS complete type test -Rs. 14000/- only
Cl-25(Supply connection and external flexible cords)	-	1500	For BIS complete type test -Rs. 14000/- only
Cl-26(Terminals for external conductors)	-	1000	For BIS complete type test -Rs. 14000/- only
Cl-27(Provision for earthing)	-	2000	For BIS complete type test -Rs. 14000/- only
Cl-28(Screws and connections)	-	1000	For BIS complete type test -Rs. 14000/- only
Cl-29(Clearances, creepage distances and solid insulation)	-	1500	For BIS complete type test -Rs. 14000/- only
Cl-30(Resistance to heat and fire)	-	1500	For BIS complete type test -Rs. 14000/- only
Cl-31(Resistance to rusting)	-	1000	For BIS complete type test -Rs. 14000/- only
Cl-32(Radiation, toxicity and similar hazards)	-	1000	For BIS complete type test -Rs. 14000/- only

-
"1 Cl-19.11.4.1 (Electrostatic discharges) Electrostatic discharge Testing facility not available 2 Cl-19.11.4.2 (Radiated fields) Radiated field Testing facility not available 3 Cl-19.11.4.3 (Fast transient bursts) Fast transient bursts Testing facility not available 4 Cl-19.11.4.4 (Surge immunity test) Surge immunity test Testing facility not available 5 Cl-19.11.4.5 (Immunity to conducted discharges) Immunity to conducted discharge Testing facility not available 6 Cl-19.11.4.6 (Class 3 Voltage dips and interruptions) Class 3 Voltage dips and interruptions Testing facility not available 7 Cl-19.11.4.7 (Harmonics) Harmonics Testing facility not available".

2220

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	1000	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	1000	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	1000	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	1000	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	5000	-
Cl. 6.2(Opacity- Appendix B)	-	1000	-
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	1500	-
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	1500	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	1500	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	1500	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	5000	-
6.1.1(VCM Content Test)	-	5000	-
3(Size of Fitting -)	-	0	-
4(Minimum thickness)	-	0	-
5(Socket dimensions)	-	0	-
6.1(Stress Relief Test)	-	0	-
6.2(Opacity)	-	0	-
6.3(Effect on Water)	-	0	-
6.4(Short-Term Hydraulic Test)	-	0	-
7.2(Production Routine Tests)	-	0	-
Cl 6.3(Effect on Water Lead (first extraction))	-	0	-
Cl 6.3(Effect on Water Lead (third extraction))	-	0	-
Cl 6.3(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	0	-
Cl 6.3(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 6.3(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-
CL 4.0(Wall thickness (average of 4.0))	-	0	-
CL 5.1(Sockt Length ( Take 4 reading and minimum will be reported))	-	0	-
Cl.4(Minimum Thickness)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	0	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	0	-
Cl. 6.2(Opacity- Appendix B)	-	0	-
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	0	-
6.1.1(VCM Content Test)	-	0	-
3(Size of Fitting -)	-	0	-
4(Minimum thickness)	-	0	-
5(Socket dimensions)	-	0	-
6.1(Stress Relief Test)	-	0	-
6.2(Opacity)	-	0	-
6.3(Effect on Water)	-	0	-
6.4(Short-Term Hydraulic Test)	-	0	-
7.2(Production Routine Tests)	-	0	-
Cl 6.3(Effect on Water Lead (first extraction))	-	0	-
Cl 6.3(Effect on Water Lead (third extraction))	-	0	-
Cl 6.3(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	0	-
Cl 6.3(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 6.3(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-
CL 4.0(Wall thickness (average of 4.0))	-	0	-
CL 5.1(Sockt Length ( Take 4 reading and minimum will be reported))	-	0	-
Cl.4(Minimum Thickness)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	0	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	0	-
Cl. 6.2(Opacity- Appendix B)	-	0	-
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	0	-
6.1.1(VCM Content Test)	-	0	-
3(Size of Fitting -)	-	0	-
4(Minimum thickness)	-	0	-
5(Socket dimensions)	-	0	-
6.1(Stress Relief Test)	-	0	-
6.2(Opacity)	-	0	-
6.3(Effect on Water)	-	0	-
6.4(Short-Term Hydraulic Test)	-	0	-
7.2(Production Routine Tests)	-	0	-
Cl 6.3(Effect on Water Lead (first extraction))	-	0	-
Cl 6.3(Effect on Water Lead (third extraction))	-	0	-
Cl 6.3(Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-	0	-
Cl 6.3(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	0	-
Cl 6.3(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	0	-
CL 4.0(Wall thickness (average of 4.0))	-	0	-
CL 5.1(Sockt Length ( Take 4 reading and minimum will be reported))	-	0	-

-
Included w.e.f 17.02.2026

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number