BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11940 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

2161

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 17573 (2021)

BWP GRADE BAMBOO MAT BOARD SPECIFICATION

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Bamboo)	-	1000	-
4.2(Adhesive)	-	2000	-
5.1(Bamboo Mats)	-	1000	-
5.1.1(Prophylactic Treatment)	-	1500	-
5.2(Application of Adhesive)	-	0	-
5.3(Conditioning of Adhesive Coated Bamboo Mats)	-	1000	-
5.4(Assembly)	-	0	-
5.5(Hot Pressing)	-	1000	-
5.6(Preservative Treatment)	-	1500	-
5.7(Moisture Content)	-	1000	-
6.2(Thickness)	-	300	-
6.3 Table - 1 (i)(Length)	-	300	-
6.3 Table - 1 (ii)(Width)	-	300	-
6.3 Table - 1 (iii)(Thickness)	-	300	-
6.3 Table - 1 (iv)(Edge straightness)	-	300	-
6.3 Table - 1 (v)(Squareness)	-	300	-
7(Workmanship and Finish)	-	1000	-
8.1 Table - 2 (i)(Density, kg/m3 , Min)	-	1000	-
8.1 Table - 2 (ii)(Moisture content, percent)	-	1000	-
8.1 Table - 2 (iii)(Internal bond strength in dry state, N/mm2 , Min)	-	1000	-
8.1 Table - 2 (iv)(Internal bond strength in wet state, N/mm2 , Min)	-	1000	-
8.1 Table - 2 (v)(Modulus of rupture, N/mm2 , Min)	-	500	-
8.1 Table - 2 (vi)(Modulus of elasticity, N/mm2 , Min)	-	500	-
8.1 Table - 2 (vii)(Tensile strength, N/mm2 , Min)	-	1000	-
8.1 Table - 2 (viii)(Compressive strength, N/mm2 , Min)	-	1000	-
8.1 Table - 2 (ix)(Resistance to ageing)	-	1000	-
8.1 Table - 2 (x) (a)(Flammability)	-	1000	-
8.1 Table - 2 (x) (b)(Flame Penetration)	-	1000	-
8.1 Table - 2 (x) (c)(Rate of Burning)	-	1500	-
8.2(Flammability, Flame Penetration and Rate of Burning)	-	1500	-
11(Marking)	-	1000	-
6.1(Dimensions)	-	0	-

26 Jul, 2027

-
Included w.e.f.19.05.2025

2162

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

All sizes

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Chemical Composition)	-	7500	-
8(Mechanical and Physical Properties)	-	7500	-
Cl 8(UTM)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
Cl 8(UTM)	-	0	-
Cl 9.5(Workmanship)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
Cl 8(UTM)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
7.0(MICRO ALLOYS)	-	0	-
7.0(ALUMINIUM)	-	0	-
7.0(NITROGEN)	-	0	-
7.0(SILICON)	-	0	-
7.0(MANGANESE)	-	0	-
7.0(PHOSPHORUS)	-	0	-
7.0(SULPHUR)	-	0	-
7.0(CARBON)	-	0	-
Cl. 11(Out of square)	-	0	-
Cl. 11(Flatness)	-	0	-
Cl. 11(Camber)	-	0	-
Cl. 11(Width)	-	0	-
Cl. 11(Thickness)	-	0	-
Cl. 8.7(Bake Hardening Index)	-	0	-
Cl. 8.6 Table 5A, 5B & 5C(Tensile Strain Hardening Component (n-Value))	-	0	-
Cl. 8.5 Table 5A, 5B & 5C(Plastic Strain Ratio (r bar/r-90))	-	0	-
Cl. 8.4(Bend Test)	-	0	-
Cl. 8.3 Table 6(Hardness Test ( Only for CR0 & CR1))	-	0	-
Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm))	-	0	-
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 80 mm gauge length)	-	0	-
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 50 mm gauge length)	-	0	-
Cl. 8.1 & Table 5A, 5B & 5C(Yield Stress)	-	0	-
Cl. 9 Table 8(Surface roughness)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 8(UTM)	-	0	-
Cl 8(UTM)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
Cl 7(UTM)	-	0	-
8.1(Mechanical)	-	0	-
8.2(Cupping test)	-	0	-
8.3(Hardness HRB/HV)	-	0	-
8.4(Bend Test)	-	0	-
8.5(Plastic strain ratio)	-	0	-
8.6(Tensile strain Hardening component)	-	0	-
8.7(Black Hardening Index)	-	0	-
10(Freedom from defects)	-	0	-
Cl. 7.3(Carbon)	-	0	-
Cl. 7.3(Manganese)	-	0	-
Cl. 7.3(Suphur)	-	0	-
Cl. 7.3(Phosphorus)	-	0	-
Cl. 7.3(Silicon)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 9.6(Workmanship)	-	0	-
Cl 9.6(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 9.6(Workmanship)	-	0	-
Cl 9.6(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 9.6(Workmanship)	-	0	-
9(Surface finish)	-	0	-
7(Chemical Composition)	-	0	-
8(Mechanical and Physical Properties)	-	0	-
Cl. 11(Out of square)	-	0	-
Cl. 11(Flatness)	-	0	-
Cl. 11(Camber)	-	0	-
Cl. 11(Width)	-	0	-
Cl. 11(Thickness)	-	0	-
Cl. 8.7(Bake Hardening Index)	-	0	-
Cl. 8.6 Table 5A, 5B & 5C(Tensile Strain Hardening Component (n-Value))	-	0	-
Cl. 8.5 Table 5A, 5B & 5C(Plastic Strain Ratio (r bar/r-90))	-	0	-
Cl. 8.4(Bend Test)	-	0	-
Cl. 8.3 Table 6(Hardness Test ( Only for CR0 & CR1))	-	0	-
Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm))	-	0	-
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 80 mm gauge length)	-	0	-
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 50 mm gauge length)	-	0	-
Cl. 8.1 & Table 5A, 5B & 5C(Yield Stress)	-	0	-
Cl. 9 Table 8(Surface roughness)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 8(UTM)	-	0	-
Cl 8(UTM)	-	0	-
Cl 10(Workmanship)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
Cl 7(UTM)	-	0	-
8.1(Mechanical)	-	0	-
8.2(Cupping test)	-	0	-
8.3(Hardness HRB/HV)	-	0	-
8.4(Bend Test)	-	0	-
8.5(Plastic strain ratio)	-	0	-
8.6(Tensile strain Hardening component)	-	0	-
8.7(Black Hardening Index)	-	0	-
10(Freedom from defects)	-	0	-
Cl. 7.3(Carbon)	-	0	-
Cl. 7.3(Manganese)	-	0	-
Cl. 7.3(Suphur)	-	0	-
Cl. 7.3(Phosphorus)	-	0	-
Cl. 7.3(Silicon)	-	0	-
Cl 9.6(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 9.6(Workmanship)	-	0	-
9(Surface finish)	-	0	-

19 Nov, 2027

-
Included w.e.f 11.07.2025

2163

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 9567 (2001)

Tin or tin - Lead coated copper wire - Specificaiton (First Revision)

Tin or Tin-lead Coated Copper Wire

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Resistivity)	-	5000	-
4.4(Diameter of Coated Wire)	-	500	-
5(Packing and Marking)	-	250	-
6.3.1(Resistance Test)	-	5000	-
6.4.1(Measurement of Diameter)	-	250	-
6.4.2(Elongation and Breaking Strength Test)	-	7500	-
6.4.3(Bend Test)	-	1500	-

19 Mar, 2026

-
Included w.e.f 28.04.2025 Excluding chemical tests

2164

SHRI KRISHNA TEST HOUSE PVT LTD (142)

8185606

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

All Grade & Types

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1, 8.1.1 & 10.1 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
Cl. 8.1, 8.1.1 & 10.1 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	10000	-
6(Freedom From Defects)	-	10000	-
9.3(Tensile Test-1608:Part 1)	-	10000	-
9.3, Table 3 (Yield Strength, Mpa)	-	10000	-
9.3, Table 3 (Tensile Strength, Mpa)	-	10000	-
9.3, Table 3 (Elongation, %)	-	10000	-
9.4(Erichsen Cupping Test,(Average depth of cupping) mm)	-	10000	-
11(Surface finish)	-	10000	-
12(Dimensions)	-	10000	-
14.1(Thickness,mm)	-	10000	-
14.2( Width, mm)	-	10000	-
14.3(Length, mm)	-	10000	-
14.4(Flatness, mm)	-	10000	-
14.5(Camber, mm)	-	10000	-
Clause 9.1, 9.2 & Table 3(IS 1608 Part 1)	-	10000	-
17(Marking)	-	10000	-
Clause 9.1, 9.2 & Table 3(0.2 Percent Yield Strength)	-	10000	-
4.1(General requirements)	-	10000	-
6(Freedom from defects)	-	10000	-
7(Heat treatment)	-	10000	-
8.1, table 1(C Si Mn Ni Cr S P Cu Ni)	-	10000	-
8.1.1, table 2(Carbon Silicon Manganese Nickel Chromium Sulphur Phosphorus Copper Nitrogen)	-	10000	-
9.1(Sample plan)	-	10000	-
9.2(Tensile test)	-	10000	-
9.3(Mechanical properties)	-	10000	-
9.4(Erichsen cupping test)	-	10000	-
10(Retests)	-	10000	-
11(Surface finish)	-	10000	-
12(Dimensions)	-	10000	-
13(Edge condition)	-	10000	-
14.1(Thickness)	-	10000	-
14.2.1(Mill Edge)	-	10000	-
14.2.2(Trimmed Edge)	-	10000	-
14.3(Length)	-	10000	-
14.4(Flatness)	-	10000	-
14.5(Camber)	-	10000	-
15(Inspection)	-	10000	-
17(Marking)	-	10000	-

13 May, 2028

-
-

2165

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Physical requirments)	-	2000	-
8.2(Physical requirments-Dimensions-Length)	-	2000	-
8.2(Physical requirments-Dimensions-Height)	-	2000	-
8.2(Physical requirments-Dimensions-Width)	-	2000	-
8.3(Physical requirments- Block density)	-	2000	-
8.4(Physical requirments- Compressive strength)	-	2000	-
8.5(Thermal Conductivity)	-	10000	-
8.6( Drying Shrinkage )	-	2000	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	2000	-
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	2000	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	2000	-
8.3 & 9.1(Indivisual Moisture Content)	-	2000	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	2000	-
3.2 & 8.2(Indivisual Height)	-	2000	-
3.2 & 8.2(Indivisual Width)	-	2000	-
3.2 & 8.2(Indivisual Length)	-	2000	-
8.6, 9.4 & 11.5(Grade)	-	2000	-
3.4(Special Faces)	-	2000	-
3.3(Faces & Arises)	-	2000	-
3.1(Shape)	-	2000	-
8.1.1(General (Exposed wall construction))	-	2000	-
5(MA TEIUA.LS)	-	2000	-
7(SURI'ACE TUTUU AND FINISH)	-	2000	-
9.3(Thermal Conductivity)	-	10000	-
15(Marking)	-	2000	-

08 May, 2028

-
-

2166

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 15658 (2006)

Precast concrete blocks for paving - Specification

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(Physical requirement)	-	1000	-
6.1.3(Physical requirement)	-	1000	-
6.1.4(Physical requirement)	-	1000	-
6.2.1 & 7.1(VISUAL INSPECTION)	-	1000	-
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	1000	-
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	1000	-
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	1000	-
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	1000	-
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	1000	-
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	1000	-
Table 1(MINIMUM PAVER BLOCK THICKNESS)	-	1000	-
B-1.3.2(MEAN INDIVIDUAL THICKNESS (of all eight test specimens), T)	-	1000	-
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	1000	-
B-1.3.3(INDIVIDUAL ASPECT RATIO (L/T) (of all eight test specimens))	-	1000	-
B-5(AVERAGE ASPECT RATIO (L/T) (for eight test specimens))	-	1000	-
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	1000	-
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	1000	-
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	1000	-
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	1000	-
B-5(INDIVIDUAL PLAN AREA, ASP (of all eight test specimens) )	-	1000	-
B-5(AVERAGE PLAN AREA, ASP (for eight test specimens))	-	1000	-
B-5(INDIVIDUAL WEARING FACE AREA, Asw (of all eight test specimens))	-	1000	-
B-5(AVERAGE WEARING FACE AREA, Asw (for eight test specimens))	-	1000	-
B- 4.3(MEAN INDIVIDUAL SQUARENESS (of all eight test specimens) )	-	1000	-
B-5(AVERAGE SQUARENESS (for eight test specimens))	-	1000	-
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	1000	-
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	1000	-
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	1000	-
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-	10000	-
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens))	-	10000	-
6.2.5.1(INDIVIDUAL COMPRESSIVE STRENGTH (Individual strength of eight test specimen))	-	10000	-
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	10000	-
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	10000	-
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	10000	-
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	10000	-
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	10000	-
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	10000	-
Annex G-7(INDIVIDUAL FAILURE LOAD/UNIT LENGTH (Individual Failure Load of eight test specimen ))	-	10000	-
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	10000	-
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	10000	-
Annex-G-7(INDIVIDUAL BREAKING LOAD (Individual Load of eight test specimen ))	-	10000	-
Annex-G-7(AVERAGE BREAKING LOAD)	-	10000	-
Cl. 6.2.2 Table 2(Overall Length)	-	1000	-
6.2.4, Table 4(Water Absorption)	-	1000	-
6.2.4, Table 4(Water Absorption)	-	1000	-
6.2.4, Table 4(Water Absorption)	-	1000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.8, Table 4(Flexural strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.7, Table 4(Tensile Spliting strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.5, Table 4(Compressive strength)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Wet)	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.6, Table 4(Abrasion Resistance Dry )	-	10000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Arris Width wise )	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Aspect Ratio)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Thickness)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Lower Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Higher Width)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
6.2.2, Table 4(Length)	-	1000	-
10(Marking)	-	1000	-
5(RAW MATERIAL)	-	1000	-
10(MARKING)	-	1000	-

08 May, 2028

-
-

2167

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

PE100, PE80, PE63

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	5000	-
3(Designation)	-	5000	-
4(Colour)	-	5000	-
6(Dimensions of pipes)	-	5000	-
7(Visual Appearance)	-	5000	-
8.1(Hydraulic characteristics)	-	5000	-
8.2(Reversion)	-	5000	-
8.3(Density)	-	5000	-
8.4(Melt Flow Rate)	-	5000	-
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	5000	-
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	5000	-
5.1(High Density Polyethylene)	-	5000	-
5.2(Anti Oxident)	-	5000	-

08 May, 2028

-
-

2168

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 15477 (2019)

Adhesives for use with ceramic tiles and mosaics

19500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	1000	-
5.1(Tensile Adhesion Strength )	-	2000	-
5.1(Tensile Adhesion Strength)	-	2000	-
5.2(Shear Adhesion Strength )	-	2000	-
5.2(Shear Adhesion Strength)	-	2000	-
5.2(Shear Adhesion Strength)	-	2000	-
5.3(OpenTime)	-	2000	-
5.4(Adjustment Time)	-	2000	-
5.5(Slip (Required for Vertical Application Only))	-	2000	-
5.6(Deformability (Required for VerticalApplication Only))	-	2000	-
8.2(Marking)	-	1000	-

08 May, 2028

-
-

2169

PAAM Testing Labs Private Limited, Greater Noida

8185506

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1000	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1000	-
5.4.2(a)( Aggregates Impact Value)	-	1000	-
5.4.2(b)( Aggregates Impact Value)	-	1000	-
5.4.3(a)( Aggregate Abrasion Value)	-	1000	-
5.4.3(b)( Aggregate Abrasion Value)	-	1000	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	1000	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	1000	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	1000	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	1000	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	1000	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	1000	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	1000	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	1000	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	1000	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	1000	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	1000	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	1000	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	1000	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	1000	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	1000	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	1000	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	1000	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	1000	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	1000	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	1000	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	1000	-
6.2-Table 7(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Nominal Size of aggregate)	-	1000	-
6.2-Table 7(i)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 80 mm sieve)	-	1000	-
6.2-Table 7(ii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 63 mm sieve)	-	1000	-
6.2-Table 7(iii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 40 mm sieve)	-	1000	-
6.2-Table 7(iv)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 20 mm sieve)	-	1000	-
6.2-Table 7(v)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 16 mm sieve)	-	1000	-
6.2-Table 7(vi)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 12.5 mm sieve)	-	1000	-
6.2-Table 7(vii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 10 mm sieve)	-	1000	-
6.2-Table 7(viii)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 4.75 mm sieve)	-	1000	-
6.2-Table 7(ix)(SIZE AND GRADING OF AGGREGATES- Graded Coarse Aggregates-Percentage Passing through 2.36 mm sieve)	-	1000	-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	1000	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	1000	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	1000	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	1000	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	1000	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	1000	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	1000	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	1000	-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	1000	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	1000	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	1000	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	1000	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	1000	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	1000	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	1000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	1000	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	1000	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	1000	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	1000	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	1000	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-3) IS-2386 (P-2)(Mica content (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Effect of organic impurities on strength of mortar (fine aggregate))	-	1000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	1000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	1000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	1000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	1000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	1000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	1000	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	1000	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	1000	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	1000	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	1000	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	1000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	1000	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	1000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	1000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	1000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	1000	-
5.5(Soundness By Magnesium Sulphate)	-	1000	-
7.2(Moisture Content)	-	1000	-
7.2(Bulking Of Fine Aggregate)	-	1000	-
7.2(Bulk Density loose)	-	1000	-
7.2(Bulk Density Rodded)	-	1000	-
5.5(Soundness By Magnesium Sulphate)	-	1000	-
7.2(Moisture Content)	-	1000	-
7.2(Bulk Density loose)	-	1000	-
7.2(Bulk Density Rodded)	-	1000	-
5.3(Elongation Index)	-	1000	-
5.3(Flakiness Index)	-	1000	-
5.6(Alkali Agregate Reaction )	-	1000	-
5.7 table 3(WaterAbsorption)	-	1000	-
5.7 table 3(Specific Gravity)	-	1000	-
5.3(Flakiness & Elongation)	-	1000	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1000	-
5.7 table 4 (Calcium oxide)	-	1000	-
5.5 Na2so4/5.5.1 Maso4/5.5.1 (Soundness)	-	1000	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	1000	-
3.2.2 Table 3 ii) IS 1963(Basicity as CaO/SiO2)	-	1000	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	1000	-
Clause 5.6(Nature of Aggregate)	-	1000	-
Clause 5.6(Dissolved Silica)	-	1000	-
Clause 5.6(Reduction in Alkalinity)	-	1000	-
Clause 5.1(General)	-	1000	-
Clause 5.1(General)	-	1000	-
Table 4 Cl. 5.7 (ii)(Total Sulphur as S)	-	1000	-
Table 4 Cl. 5.7 (iii)(Total iron as FeO)	-	1000	-
Table 5 Cl. 5.7 (i)(Calcium oxide as CaO,)	-	1000	-
Table 5 Cl. 5.7 (ii)(Magnesium oxide as MgO)	-	1000	-
Table 5 Cl. 5.7 (iii)(Total iron as FeO)	-	1000	-
Table 5 Cl. 5.7 (iv)(Basicity as CaO/SiO2)	-	1000	-
Table 6 Cl. 5.7 (i)(Calcium oxide as CaO)	-	1000	-
Table 6 Cl. 5.7 (ii)(Total sulphur as S)	-	1000	-
Table 6 Cl. 5.7 (iii)(Total iron as FeO)	-	1000	-
Table 6 Cl. 5.7 (iv)()	-	1000	-
Table 6 Cl. 5.7 (iv)()	-	1000	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	1000	-

08 May, 2028

-
-

2170

BIS, Central Laboratory (CL)

None

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

20400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Shape and Design)	-
Cl-5.3 (Material)	-
Cl-5.4, Table-1 (i) (Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-
Cl-5.4, Table-1 (ii) (Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-
Cl-5.4, Table-1 (iii) (Whole shoe flexing, flexes)	-
Cl-5.4, Table-1 (iv) (Water proofness on complete shoe)	-
Cl-5.4, Table-1 (v) (Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-
Cl-5.4, Table-1 (vi) (Attachment strength of strap and buckle/D-ring N)	-
Cl-5.4, Table-1 (vii) (Attachment strength of strap and velcro , N, Min)	-
Cl-5.4, Table-1 (viii) (Strength of eyelet attachment, N, Min)	-
Cl-5.4, Table-1 (ix) (Heel pull off strength, N, Min)	-
Cl-5.4, Table-1 (x) (Top piece attachment strength, N, Min)	-
Cl-5.4, Table-1 (xi) (Seam strength, N/mm, Min)	-
Cl-5.4, Table-1 (xii) (Whole shoe topline strength, N, Min)	-
Cl-5.4, Table-1 (xiii) (Abrasion resistance (volume loss), mm3)	-
Cl-6.1.1, Table-2 (i) (Tear trength, N)	-
Cl-6.1.1, Table-2 (ii) (Flexing resistance, flexes)	-
Cl-6.1.1, Table-2 (v) (Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-
Cl-6.3, Table-7 (i) (Flexing index, Min)	-
Cl-6.3, Table-7 (ii) (Abrasion resistance at 400 cycles)	-
Cl-6.3, Table-7 (iii) (Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-
Cl-6.4, Table-8 (i) (Thickness, mm, Min)	-
Cl-6.4, Table-8 (ii) (Abrasion resistance)	-
Cl-6.4, Table-8 (iii) (Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-

-
-

2171

BIS, Central Laboratory (CL)

None

IS 303 (1989)

Plywood for General Purposes -

Rs 4000/- /BWR Grade, Rs.4900/- for MR Grade Rs 4000/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 (Dimensions & Tolerances - Edge Straightness - Annexure C)	-

-
-

2172

ADS LABTECH, GHAZIABAD

8178326

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

PULVERIZED FUEL ASH

9400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	500	OK
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	500	OK
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	500	OK
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	500	OK
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	500	OK
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	500	OK
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	500	OK
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	500	OK
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	500	OK
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	1500	OK
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	1500	OK
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	1500	OK
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	1500	OK
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	1500	OK
5.1, 7.1, table-2, iii(Lime reacitivity)	-	1500	OK
5.1&7.1, table-2 (III)(Lime Reactivity)	-	1500	OK
5.1, 7.1, table-2, iii(Lime reacitivity)	-	1500	OK
7.2(Uniformity Requirements)	-	1500	OK

15 May, 2027

-
Included w.e.f.09.04.2025

2173

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 302 : Part 2 : Sec 74 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 74 Portable immersion heaters

66000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	2000	-
8(Protection against access to live parts)	-	2000	-
10(Power input and current)	-	2000	-
10(Power input and current)	-	0	Testing charges included in Cl.10
11(Heating)	-	4000	-
13.1 &13.2(Leakage current test)	-	1500	-
13.1 &13.3(Electric strength test)	-	1500	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	4000	-
15.3(Moisture resistance)	-	0	Testing charges included in Cl.15
16.1 &16.2(Leakage current test)	-	1500	-
16.1 & 16.3(Electric strength test)	-	1500	-
17(Overload protection of transformers and associated circuits)	-	4000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	8000	Charges applicable excluding the test of Cl.19.11.4.1 to Cl.19.11.4.7. The testing charges for EMI/EMC Testing (Cl.19.11.4.1 to Cl.19.11.4.7) will be Rs. 55000 charged extra.
20.1(Stability and mechanical hazards)	-	2000	-
20.2(Stability and mechanical hazards)	-	0	Testing charges included in Cl.20.1
21(Mechanical strength)	-	3000	-
22(Construction)	-	8000	-
23(Internal wiring)	-	2000	-
24(Components)	-	3000	-
25("Supply connection and external flexible cords")	-	1000	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	2000	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	2000	-
30(Resistance to heat and fire)	-	3000	-
30.101(Resistance to heat and fire)	-	0	Testing charges included in Cl.30
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	1000	-
Cl 19.11.4.1(Electrostatic discharges)	-	5000	if applicable
Cl 19.11.4.2(Radiated fields)	-	20000	if applicable
Cl 19.11.4.3(Fast transient bursts)	-	5000	if applicable
Cl 19.11.4.4(Voltage surges)	-	5000	if applicable
Cl 19.11.4.5(Immunity to conducted disturbances)	-	10000	if applicable
Cl 19.11.4.6(Voltage dips and interruptions)	-	5000	if applicable
Cl 19.11.4.7(Harmonics and inter-harmonics)	-	5000	if applicable
Cl 19.11.4.8(Abnormal operation)	-	5000	-
24.101(Components)	-	0	Testing charges included in Cl.24
7(Marking and instructions)	-	0	-
8(Protection against access to live parts)	-	0	-
10(Power input and current)	-	0	-
10(Power input and current)	-	0	-
11(Heating)	-	0	-
13.1 &13.2(Leakage current test)	-	0	-
13.1 &13.3(Electric strength test)	-	0	-
14(Transient overvoltages)	-	0	-
15(Moisture resistance)	-	0	-
15.3(Moisture resistance)	-	0	-
16.1 &16.2(Leakage current test)	-	0	-
16.1 & 16.3(Electric strength test)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
20.2(Stability and mechanical hazards)	-	0	-
21(Mechanical strength)	-	0	-
22(Construction)	-	0	-
23(Internal wiring)	-	0	-
24(Components)	-	0	-
25("Supply connection and external flexible cords")	-	0	-
26("Terminals for external conductors")	-	0	-
27(Provision for earthing)	-	0	-
28(Screws and connections)	-	0	-
29("Clearances, creepage distances and solid insulation")	-	0	-
30(Resistance to heat and fire)	-	0	-
30.101(Resistance to heat and fire)	-	0	-
31(Resistance to rusting)	-	0	-
32("Radiation, toxicity and similar hazards")	-	0	-
Cl 19.11.4.1(Electrostatic discharges)	-	0	-
Cl 19.11.4.2(Radiated fields)	-	0	-
Cl 19.11.4.3(Fast transient bursts)	-	0	-
Cl 19.11.4.4(Voltage surges)	-	0	-
Cl 19.11.4.5(Immunity to conducted disturbances)	-	0	-
Cl 19.11.4.6(Voltage dips and interruptions)	-	0	-
Cl 19.11.4.7(Harmonics and inter-harmonics)	-	0	-
Cl 19.11.4.8(Abnormal operation)	-	0	-
24.101(Components)	-	0	-

20 Jun, 2028

-
Included w.e.f 25.03.2025 Exclusion:Cl 24 (Components), Cl 32 ("Radiation, toxicity and similar hazards")

2174

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 17571 (2021)

Flattened Bamboo Board - Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Bamboo)	-	2000	-
4.2(Veneer)	-	2000	-
4.3(Adhesive)	-	1000	-
5.1(Flattened Bamboo)	-	1000	-
5.2(Preservative Treatment)	-	1000	-
5.3(Application of Adhesive)	-	1000	-
5.4(Conditioning of Adhesive Coated Flattened Bamboos)	-	500	-
5.5(Assembly)	-	1000	-
5.6(Hot Pressing)	-	1000	-
5.7(Moisture Content)	-	1000	-
6.1(Dimensions)	-	1000	-
6.2(Thickness)	-	1000	-
6.3 Table - 1 (i)(Length)	-	1000	-
6.3 Table - 1 (ii)(Width)	-	1000	-
6.3 Table - 1 (iii)(Thickness)	-	1000	-
6.3 Table - 1 (iv)(Edge straightness)	-	1000	-
6.3 Table - 1 (v)(Squareness)	-	1000	-
7(Workmanship and Finish)	-	1000	-
8.1 Table - 2 (i)(Density, kg/m3 , Min)	-	1000	-
8.1 Table - 2 (ii)(Moisture content)	-	1000	-
8.1 Table - 2 (iii)(Internal bond strength in dry state)	-	1000	-
8.1 Table - 2 (iv)(Internal bond strength in wet state)	-	1000	-
8.1 Table - 2 (v)(Modulus of rupture)	-	1000	-
8.1 Table - 2 (vi)(Modulus of elasticity)	-	2000	-
8.1 Table - 2 (vii)(Tensile strength)	-	1000	-
8.1 Table - 2 (viii)(Compressive strengt)	-	2000	-
8.1 Table - 2 (ix)(Resistance to ageing)	-	1000	-
8.1 Table - 2 (x) (a)(Flammability)	-	2000	-
8.1 Table - 2 (x) (b)(Flame Penetration)	-	2000	-
8.1 Table - 2 (x) (c)(Rate of Burning)	-	2000	-
11(Marking)	-	1000	-
4.1(Bamboo)	-	0	-
4.2(Veneer)	-	0	-
4.3(Adhesive)	-	0	-
5.1(Flattened Bamboo)	-	0	-
5.2(Preservative Treatment)	-	0	-
5.3(Application of Adhesive)	-	0	-
5.4(Conditioning of Adhesive Coated Flattened Bamboos)	-	0	-
5.5(Assembly)	-	0	-
5.6(Hot Pressing)	-	0	-
5.7(Moisture Content)	-	0	-
6.1(Dimensions)	-	0	-
6.2(Thickness)	-	0	-
6.3 Table - 1 (i)(Length)	-	0	-
6.3 Table - 1 (ii)(Width)	-	0	-
6.3 Table - 1 (iii)(Thickness)	-	0	-
6.3 Table - 1 (iv)(Edge straightness)	-	0	-
6.3 Table - 1 (v)(Squareness)	-	0	-
7(Workmanship and Finish)	-	0	-
8.1 Table - 2 (i)(Density, kg/m3 , Min)	-	0	-
8.1 Table - 2 (ii)(Moisture content)	-	0	-
8.1 Table - 2 (iii)(Internal bond strength in dry state)	-	0	-
8.1 Table - 2 (iv)(Internal bond strength in wet state)	-	0	-
8.1 Table - 2 (v)(Modulus of rupture)	-	0	-
8.1 Table - 2 (vi)(Modulus of elasticity)	-	0	-
8.1 Table - 2 (vii)(Tensile strength)	-	0	-
8.1 Table - 2 (viii)(Compressive strengt)	-	0	-
8.1 Table - 2 (ix)(Resistance to ageing)	-	0	-
8.1 Table - 2 (x) (a)(Flammability)	-	0	-
8.1 Table - 2 (x) (b)(Flame Penetration)	-	0	-
8.1 Table - 2 (x) (c)(Rate of Burning)	-	0	-
11(Marking)	-	0	-

26 Jul, 2027

-
Included.w.e.f.19.05.2025

2175

Stellar Test House, Noida

8171606

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	500	-
Cl-7.2.3(Grain Direction)	-	500	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	100	-
Cl-8.1(Dimensions -length)	-	1000	-
Cl-8.2(Thickness of the plywood boards)	-	500	-
Cl-8.3(Squareness)	-	1000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1000	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-

26 Sep, 2028

-
Included w.e.f 08.05.2025 Exclusion: Cl-11.6 (Formaldehyde Content Test), Cl-11.7 (Steady-State Formaldehyde Emission Test)

2176

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 737 (2024)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision)

All

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Ordering Information - IS 737)	-	14500	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	14500	-
Cl. 4 (b)(Condition - IS 737)	-	14500	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	14500	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	14500	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	14500	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	14500	-
Cl. 4 (g)(Packing Mode - IS 737)	-	14500	-
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	14500	-
Cl. 6(Freedom from Defects - IS 737)	-	14500	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	14500	-
Cl. 7(Al - IS 504)	-	14500	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	14500	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	14500	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	14500	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	14500	-
Cl. 8.2(Bend Test - IS 1599)	-	14500	-
Cl. 9(Condition - IS 737/ IS 5052)	-	14500	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	14500	-
Cl. 11(Selection of Test Samples - IS 737)	-	14500	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	14500	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	14500	-
Cl. 12(Retests - IS 737/ IS 10259)	-	14500	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	14500	-
Cl. 13.1(Marking - IS 737)	-	14500	-

31 Dec, 2026

-
Included w.e.f 12.03.2025

2177

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 13893 (1994)

Polyurethane soles semirigid - specification

6100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (Amendment 2)(Thickness)	-	250	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	250	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	500	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	1200	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	1200	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	1500	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	600	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	0	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	600	-

02 May, 2027

-
-

2178

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

5200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	0	-
5/5.1(REQUIREMENTS-General)	-	0	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	5200	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	0	-
5/5.1(REQUIREMENTS-General)	-	0	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	0	-
5/5.1(REQUIREMENTS-General)	-	0	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	-
5.5 (Amendment 1)(Thickness)	-	0	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	-
5.7 Table 2 i) (Amendment 1)(Relative Density)	-	0	-
5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A)	-	0	-
5.7, Table 2 iii) (Amendment 1)(Flexing resistance)	-	0	-
5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N)	-	0	-
5.7, Table 2 v) (Amendment 1)(Tensile strength)	-	0	-
5.7, Table 2 vi) (Amendment 1)(Elongation at break)	-	0	-
5.7, Table 2 vii) (Amendment 1)(Tear strength (average force))	-	0	-

02 May, 2027

-
-

2179

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	0	-
Cl. No.5("SIZE AND FITTINGS ")	-	0	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	400	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	0	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	1000	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	0	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	600	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	0	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	0	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	0	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	0	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	200	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	200	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	400	-
Cl. No.8.4,Table no. 5(i)(Density)	-	0	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	1000	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1000	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	1000	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	200	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	200	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	0	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	200	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	400	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	200	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	600	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	200	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	200	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	2000	Only for physical testing parameters Rs.10000
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl. No.8.6.2(Lead content)	-	1000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	0	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	0	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	0	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	0	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	0	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	0	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	0	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	0	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	0	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	0	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	0	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	0	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	0	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	0	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	0	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	0	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	0	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	0	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	0	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	0	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	0	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	0	-
Cl-10 (Amendment No-1)(Marking)	-	0	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	0	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	0	-

02 May, 2027

-
-

2180

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 10702 (2023)

Hawai Chappal-Specification

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	0	-
4.2(Length)	-	400	-
4.3(Thickness)	-	400	-
4.4 , Table No. 1 , i)(Density)	-	200	PER PARAMETER
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	600	PER PARAMETER
4.4 , Table No. 1 , iii)(3Split tear strength)	-	400	PER PARAMETER
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	400	PER PARAMETER
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1000	PER PARAMETER
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1000	PER PARAMETER
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	600	PER PARAMETER
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	400	PER PARAMETER
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	200	PER PARAMETER
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	200	FOR PHYSICAL TESTING Rs.6000
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	4000	FOR CHEMICAL TESTING Rs.4000
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	400	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	400	-
Cl.No. 5.2(lead content)	-	0	-
Clause 4.1 - 4.1.1(Bottom Material)	-	0	-
Clause 4.1 - 4.1.2(Strap Material)	-	0	-
Clause 4.1 - 4.1.3(Material)	-	0	-
Clause 4.1 - 4.1.4(Material)	-	0	-
Clause 4.2(Material)	-	0	-
Clause 4.3 - 4.3.1(Thickness)	-	0	-
Clause 4.3 - 4.3.2(Thickness)	-	0	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	0	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	0	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	0	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	0	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	0	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	0	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	0	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	0	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	0	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	0	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	0	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	0	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	0	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	0	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	0	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	0	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	0	-
4.2(Length)	-	0	-
4.3(Thickness)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	0	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	0	-
Cl-4 ((Amendment No-1)(Category And Type)	-	0	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	0	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	0	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	0	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	0	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	0	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	0	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	0	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	0	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	0	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	0	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	0	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	0	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	0	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	0	-

02 May, 2027

-
-

2181

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	0	-
Cl No.4.2(Construction)	-	0	-
Cl No.4.3(Whole Footwear)	-	0	-
4.3.1(Insole)	-	0	-
4.3.2(Toe spring height)	-	0	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	400	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	200	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	200	-
4.3.6(Energy Absorption at Seat Region)	-	600	-
4.3.7(Complete Shoe Flexing)	-	1000	-
4.3.8(Washability)	-	1000	-
4.3.9(Slip Resistance)	-	2000	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	200	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	200	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	400	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	600	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	200	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	400	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	2000	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	400	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	0	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	0	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	200	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	0	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	1000	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	600	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	0	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	600	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	0	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	400	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	0	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	0	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	200	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	400	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	0	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	300	FOR WATER DESORPTION RS.100
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	1000	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	0	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	0	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	0	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	0	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	600	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	600	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	0	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	600	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	400	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	400	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	200	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	200	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	200	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	200	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	200	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	400	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	400	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	400	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	400	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	600	FOR LAC TAG STRENGHT RS.200
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	400	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	400	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	400	FOR PHYSICAL TESTING, RS 23700
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	13000	FOR CHEMICAL testing, Rs. 13000
Cl No . 5(MARKING AND PACKING)	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	0	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	2000	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	1000	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	600	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	400	FOR PHYSICAL TESTING, RS 21700
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	15000	FOR CHEMICAL testing, Rs. 15000
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	0	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	0	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	0	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	0	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	0	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	0	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	0	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	0	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	0	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	0	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	0	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	0	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	0	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	0	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	0	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	0	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	0	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	0	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	0	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	0	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	0	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	0	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	0	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	0	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	0	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	0	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	0	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	0	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	0	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	0	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	0	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	0	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	0	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	0	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	0	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	0	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	0	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	0	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	0	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	0	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	0	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	0	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	0	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	0	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	0	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	0	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	0	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	0	-

02 May, 2027

-
-

2182

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 16994 (2018)

Footwear for Men and Women for Municipal Scavenging Work

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6(Leak Proof test)	-	200	-
8.4(Volatility & lead content )	-	500	-
8.3(Compression Resistance)	-	0	-
8.3(Impact resistance )	-	1000	-
8.2(Internal Toe cap length)	-	200	-
8.1(Height of upper )	-	200	-
8.0(Construction)	-	0	-
7.10(Ageing test)	-	800	-
7.9(Hydrolysis)	-	0	-
7.8(Insocks Material )	-	0	-
7.7.5(Upper / Outsole bond strength)	-	0	-
7.7.4(Interlayer Bond Strength )	-	600	-
7.7.3(Flexing Resistance )	-	600	-
7.7.2(Abrasion Resistance)	-	700	-
7.7.1(Tear Strength )	-	600	-
7.7(Hardness (IRHD))	-	500	-
7.7(Thickness)	-	0	-
7.7(Density )	-	0	-
7.6(Peel Strength )	-	600	-
7.6(Shape retention)	-	1000	-
7.6(Moisture )	-	0	-
7.6(Resilience test )	-	0	-
7.6(1st Dry collapsing load, hardness)	-	0	-
7.5(Insocks )	-	800	-
7.5(Insoles )	-	0	-
7.5(Water abrasion & desorption)	-	0	-
7.5(Thickness )	-	0	-
7.4(Tensile Strength )	-	0	-
7.4(Abrasion Resistance)	-	0	-
7.4(Tear Strength )	-	0	-
7.3(Flexing Resistance )	-	500	-
7.3(Tensile Strength )	-	600	-
7.3(Thickness )	-	0	-
7.3(Water Vapour permeability & coefficient )	-	600	-
7.3(Tear Strength )	-	0	-
7.1(Compression Tester)	-	1000	-
7.1(Impact resistance)	-	0	-

02 May, 2027

-
-

2183

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 13995 (1995)

Unlined moulded rubber boots - Specification

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.7(Size)	-	0	-
5.1.6(Design)	-	0	-
5.1.5(Flexing resistance of upper)	-	600	-
5.1.4(Resistance to dry heat ageing )	-	600	-
5.1.3(Tear Strength)	-	600	-
5.1.2(Tensile Strength (after ageing))	-	600	-
5.1.1(Tensile Strength (before ageing))	-	600	-
4.1(Thickness )	-	0.02	-

02 May, 2027

-
-

2184

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 11544 (1986)

Specification for slipper, rubber

7700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.6(Thickness of components)	-	0	-
3.2.5(Type of Thread)	-	0	-
3.2.4(Colour fasntess to washing)	-	4800	IT INCLUDES LIGHT FASTNESS,WASHING AND PERSPIRATION
3.2.4(Picks per cm)	-	0	-
3.2.4(End per cm)	-	0	-
3.2.4(Mass per unit area)	-	0	-
3.2(Flexural endurance)	-	600	-
3.2(Hardness after ageing)	-	500	-
3.2(Hardness (IRHD))	-	0	-
3.2(Relative density )	-	400	-
3.1(Shape & Design)	-	0	-

02 May, 2027

-
-

2185

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 10702 (1992)

Rubber hawal chappal - Specification (Second Revision)

4100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4(Stud bolt)	-	0	-
5.4(Stud diameter)	-	0	-
5.4(Tear strength )	-	600	-
5.4(Hardness (shore A)- after ageing)	-	500	-
5.4(Hardness (Shore A))	-	0	-
5.4(Breaking strength )	-	0	-
5.4(Elongation at break )	-	0	-
5.4(Tensile Strength )	-	600	-
5.4(Relative density )	-	400	-
5.4(Shrinkage test (at 100 C temp))	-	0	-
5.4(Shrinkage test (at room temp))	-	0	-
5.4(Split tear strength )	-	600	-
5.4(Compression set)	-	1000	-
5.4(Hardness (Shore A))	-	500	-
5.4(Relative density)	-	0	-
5.3(Thickness )	-	0	-
5.1(Shape & Design)	-	0	-

02 May, 2027

-
-

2186

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 6721 (1972)

Specification for PVC sandal

2600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Dimension)	-	0	-
4.0(Lead Content )	-	250	-
4.0(Volatility % by mass)	-	250	-
4.0(Tear strength )	-	600	-
4.0(Elongation at break )	-	0	-
4.0(Tensile Strength )	-	600	-
4.0(Hardness (IRHD))	-	500	-
4.0(Density )	-	400	-

02 May, 2027

-
-

2187

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 15298 : Part 3 (2019)

Personal protective equipment: Part 3 protective footwear (Second Revision)

38800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2 Table-2(Height of upper)	-	0	-
5.2.3 Table-2(Seat Region)	-	0	-
5.3.1.1 Table-2(Construction)	-	0	-
5.3.1.2 Table-2(Upper/Outsole Bond)	-	600	-
Table-2(Strength)	-	0	-
5.3.2.1 Table-2(General)	-	0	-
5.3.2.2 Table-2(Internal Length of toe cap)	-	100	-
5.3.2.3 Table-2(Impact Resistance -T- )	-	1000	-
5.3.2.4 Table-2(Compression)	-	600	-
5.3.2.5 Table-2(Behaviour of toe cap)	-	400	-
5.3.3 Table-2(Leak Proofness)	-	200	-
5.3.4 Table-2(Specific Ergonomic)	-	500	-
Table-2(Features)	-	0	-
5.3.5.2 Table-2(Slip Resistance SRA)	-	1500	-
5.3.5.3 Table-2(Slip Resistance SRB)	-	0	-
Table-2(0.18)	-	23100	INNOCUOSNESS 2100 FOR 1 SAMPLE TOTAL 11 SAMOLE 11*2100=23100
5.3.5.4 Table-2(Slip Resistance SRC)	-	0	-
5.4.1 Table-2(General)	-	0	-
5.4.2 Table-2(Thickness)	-	0	-
5 4 3 Table-2(Tear Strength)	-	600	-
5.4.4 Table-2(Tensile Properties)	-	600	-
5.4.5 Table-2(Flexing Resistance)	-	600	-
5.4.6 Table-2(Water Vapour Permeability & Coefficient)	-	600	-
5 4.7 Table-2( )	-	0	-
5 4.8 Table-2(Hydrolysis)	-	500	-
5.4 9 Table-2(Chrome VI)	-	0	-
5.5.1 Table-2(Tear Strength)	-	0	-
5.5.2 Table-2(Abrasion Resistance)	-	700	-
5.5.3 Table-2(Water Vapour Permeability & Coefficient)	-	0	-
5.5.4 Table-2(pH Value)	-	0	-
5.5.5 Table-2(Chrome VI)	-	0	-
5.6.1 Table-2(Tear Strength)	-	0	-
5.6.2 Table-2(pH Value)	-	0	-
5.6.3 Table-2(Chromium VI)	-	0	-
5.7.1 Table-3(Thickness)	-	0	-
5.7.2 Table-3(pH Value)	-	0	-
5.7.3 Table-3(Water Absorption &)	-	0	-
Table-3(Desorption)	-	0	-
5.7.4.1 Table-3(Insole Abrasion)	-	0	-
5.7.4.2 Table-3(Abrasion)	-	0	-
5.7.5 Table-3(Chromium VI)	-	0	-
5.8.1 Table-2(Design)	-	0	-
5.8.2 Table-2(Tear Strength)	-	0	-
5.8.3 Table-3(Abrasion Resistance)	-	0	-
5.8.4 Table-3(Flexing Resistance)	-	0	-
5.8.5 Table-3(Hydrolysis)	-	0	-
5.8.6 Table-2(Interlayer BondStrength)	-	0	-
6.2.1 Table-I8(Penetration Resistance)	-	0	-
6.2.2.1 Table-18(Electrical Properties)	-	500	-
Table-18(Conductive Footwear)	-	0	-
6.2.2.2 Table-18(Antistatic Footwear)	-	0	-
6.2.2.3 Table-18(Electrically Insulated)	-	0	-
6.2.3.1 Table-18(Heat Insulated Comp)	-	1000	-
6.2.3.2 Table-18(Cold Insulated)	-	2000	-
6.2.4 Table-18(Energy Absorption of seat region)	-	500	-
6.2.5 Table-18(Water Resistance)	-	500	-
6.2.7 Table-18(Ankle Protection)	-	0	-
6.2.8 Table-18(Cut Resistance)	-	600	-
6.3 Table-18(Water Penetration & Absorption)	-	0	-
6.4.1 Table-18(Resistance to Hot Contact)	-	0	-
6.4.2 Table-18(Resistance to Fuel oil)	-	0	-

02 May, 2027

-
-

2188

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 16645 (2018)

Moulded Plastics Footwear ” Lined or Unlined Polyurethane Boots for General Industrial use ” Specification

4100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.8.2& 5.8.3(Hydrolysis )	-	0	-
5.8.1(Tensile strength after Hydrolysis)	-	600	-
5.7(Split tear strength )	-	600	-
5.6(Resistance to soling to cut growth)	-	600	-
5.5(Cold flex temp of upper)	-	600	-
5.4(Hardness (IRHD))	-	500	-
5.3(Tesile Strength )	-	600	-
5.2(Resistance to flexing of boot upper)	-	600	-
5.1(General )	-	0	-
4.3(Thickness of components )	-	0	-
4.2(Thickness )	-	0	-
4.1(Soling Pattern )	-	0	-

02 May, 2027

-
-

2189

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 12254 (1993)

Polyvinyl chloride (PVC) Industrial boots - Specification (First Revision)

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Sulphur content )	-	400	-
5.5(Relative Density)	-	400	-
5.6(Volatility )	-	250	-
5.7(Lead Content )	-	250	-
5.1.1(Shape and Dimension)	-	0	-
5.2(Shape and Dimension)	-	0	-
5.3.1(Thickness)	-	0	-
5.3.2 Table 1(Thickness, Boot Upper, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Thickness, Foxing strip, At the Heel, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Thickness, Foxing strip, At the Heel, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Thickness, Foxing strip , Elsewhere, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Thickness, Foxing strip , Elsewhere, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Boot Bottom, Full Thickness, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Boot Bottom, Full Thickness, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Boot Bottom, Outsole only, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Boot Bottom, Outsole only, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Heel , Full Thickness, IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Heel , Full Thickness,IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Heel, Wearing surface to filler Block,IS 12240 (Part 1))	-	0	-
5.3.2 Table 1(Heel, Wearing surface to filler Block,IS 12240 (Part 1))	-	0	-
5.4 Table 2(Hardness, IS 12240 (Part 2))	-	500	-
5.4 Table 2(Hardness, IS 12240 (Part 2))	-	0	-
5.5(Relative Density, IS 12240 (Part 3))	-	400	-
5.6(Volatility, IS 12240 ( Part 2) )	-	0	-
5.8 Table 3(Tensile Requirements, Upper, IS 12240 ( Part 6) )	-	0	-
5.8 Table 3(Tensile Requirements, Upper, IS 12240 ( Part 6) )	-	0	-
5.8 Table 3(Tensile Requirements, Sole, IS 12240 (part 6))	-	0	-
5.8 Table 3(Tensile Requirements, Sole, IS 12240 (part 6))	-	0	-
5.9(Resistance to Cut Growth (Flexing test) for Sole, IS 12240 (Part 7))	-	600	-
5.1(Resistance to Flexing for Upper, IS 12240 (Part 8))	-	0	-
5.11(Leg Height, IS 12240 (part 9))	-	200	-
5.12(Leakage Resistance)	-	200	-
5.13(Cold Flex Temperature)	-	1000	-
5.14(Finish)	-	0	-
5.13(Cold flex test)	-	0	-
5.12(Leakage resistance)	-	200	-
5.11(Leg Height )	-	0	-
5.10(resistance to flexing for upper )	-	200	-
5.9(Resistance to cut growth (flexing test))	-	600	-
5.8(Tensile Strength )	-	600	-
5.7(Lead contect )	-	0	-
5.6(Volatility )	-	0	-
5.5(Relative density )	-	0	-
5.4(Hardness (IRHD))	-	0	-
5.3(Thickness )	-	0	-
5.2(Soling pattern )	-	0	-
5.1(Shape & Design)	-	0	-

02 May, 2027

-
-

2190

CENTRAL LEATHER RESEARCH INSTITUTE (CSIR-CLRI), CHENNAI

6167704

IS 5557 (2004)

Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision)

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	500	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	3000	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	600	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	0	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	400	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	400	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	600	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	400	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	600	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	200	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	500	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	0	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	0	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	0	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	0	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	0	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	0	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	0	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	0	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	0	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	0	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	0	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	0	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	1000	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	0	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	0	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	0	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	0	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	0	-

02 May, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number