BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11940 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

2461

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

1100

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	200	-
11.2(Legibility)	-	200	-
11.1(Durability)	-	200	-
11(Identification)	-	200	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	1000	-
10.4(Flammability test- Unaffected portion)	-	1000	-
10.4(Flammability test-Burning after flame removal)	-	200	-
table 1 e) 3) (IR constant- max. Temp)	-	500	-
table 1 e) 3) (IR constant- Room temp )	-	500	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	500	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	500	-
10.2(HV (room temperature))	-	500	-
10.1(HV (water immersion))	-	500	-
10.1(HV (water immersion))	-	500	-
10.8(Smoke density rating)	-	500	-
10.6(Halogen evolution)	-	500	-
10.7(Temperature index)	-	500	-
10.5(Oxygen index)	-	500	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	500	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	500	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	500	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	500	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	500	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	500	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	500	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	500	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	500	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	500	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	500	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	500	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	1000	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	1000	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	500	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	500	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	500	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	500	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	500	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	500	-
Table 1 iii) c) 3)(Elongation variation)	-	500	-
Table 1 iii) c) 3)(TS variation)	-	500	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	500	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	500	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	500	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	500	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	200	-
8.3(Thickness of Sheath)	-	200	-
5.2(Application )	-	200	-
5.3(Thickness of Insulation)	-	200	-
9.1(Ovality)	-	200	-
9(Overall dimensions)	-	200	-
10.11(Per sulphate test (for tinned Cu cable only))	-	800	-
4.2(Conductor resistance test)	-	800	-
4.1(Wrapping test (for Al))	-	500	-
4.1(Tensile test (for Al)- After Stranding)	-	500	-
4.1(Tensile test (for Al)-Before Stranding)	-	500	-
4.1(Annealing test (for copper))	-	500	-
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	200	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	200	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	200	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	200	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	200	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	200	-
12(CONSTRUCTION Core Identification)	-	200	-
8.1(Sheath Material )	-	200	-
7(Binder Tape)	-	200	-
6.2(Filler)	-	200	-
5.1(Insulation)	-	200	-
4.4(Joints in Conductor)	-	200	-
4.1(Conductor - Material)	-	200	-
10.11(Persulphate Test )	-	800	-
12.0(Core identification)	-	200	-
4, IS 8130(Construction of conductor)	-	200	-
Table 2, IS 8130(No fo wire in a conductor)	-	200	-
8.3(Minimum thickness of Sheath)	-	500	-
8.3(Avarage thickness of Sheath)	-	500	-
5.3(Minimum thickness of insulation)	-	500	-
5.3(Avarage thickness of insulation)	-	500	-
table 1, 4.2(insulation resistance test)	-	500	-

26 Sep, 2027

-
-

2462

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1, & 4.1.1(Lead)	-	1500	-
4.1.2(Aluminium)	-	800	-
4.2, Table 1of IS:21 (Designation 64430)(Aluminium)	-	800	-
4.2, Table 1of IS:21 (Designation 64430)(Lead)	-	800	-
4.2, Table 1of IS:21 (Designation 64430)(Chromium)	-	800	-
4.2, Table 1of IS:21 (Designation 64430)(Titanium and or other grain refining elements)	-	800	-
4.2, Table 1of IS:21 (Designation 64430)(Zinc)	-	800	-
4.2, Table 1of IS:21 (Designation 64430)(Manganese)	-	800	-
4.2, Table 1of IS:21 (Designation 64430)(Iron)	-	800	-
4.2, Table 1of IS:21 (Designation 40800)(Silicon)	-	800	-
4.2, Table 1of IS:21 (Designation 64430)(Magnesium)	-	800	-
4.2, Table 1of IS:21 (Designation 64430)(Copper)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-B)(Aluminium)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-B)(Lead)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-B)(Chromium)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-B)(Zinc)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-B)(Manganese)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-B)(Iron)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-B)(Silicon)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-B)(Magnesium)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-B)(Copper)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-A)(Aluminium)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-A)(Lead)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-A)(Chromium)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-A)(Zinc)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-A)(Manganese)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-A)(Iron)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-A)(Silicon)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-A)(Magnesium)	-	800	-
4.2, Table 1of IS:21 (Designation 51000-A)(Copper)	-	800	-
4.2, Table 1of IS:21 (Designation 40800)(Aluminium)	-	800	-
4.2, Table 1of IS:21 (Designation 40800)(Lead)	-	800	-
4.2, Table 1of IS:21 (Designation 40800)(Titanium and or other grain refining elements)	-	800	-
4.2, Table 1of IS:21 (Designation 40800)(Zinc)	-	800	-
4.2, Table 1of IS:21 (Designation 40800)(Manganese)	-	800	-
4.2, Table 1of IS:21 (Designation 40800)(Iron)	-	800	-
4.2, Table 1of IS:21 (Designation 40800)(Magnesium)	-	800	-
4.2, Table 1of IS:21 (Designation 40800)(Copper)	-	800	-
4.2, Table 1of IS:21 (Designation 31500)(Aluminium)	-	800	-
4.2, Table 1of IS:21 (Designation 31500)(Titanium and or other grain refining elements)	-	800	-
4.2, Table 1of IS:21 (Designation 31500)(Lead)	-	800	-
4.2, Table 1of IS:21 (Designation 31500)(Zinc)	-	800	-
4.2, Table 1of IS:21 (Designation 31500)(Manganese)	-	800	-
4.2, Table 1of IS:21 (Designation 31500)(Iron)	-	800	-
4.2, Table 1of IS:21 (Designation 31500)(Silicon)	-	800	-
4.2, Table 1of IS:21 (Designation 31500)(Magnesium)	-	800	-
4.2, Table 1of IS:21 (Designation 31500)(Copper)	-	800	-
4.2, Table 1of IS:21 (Designation 31000)(Aluminium)	-	800	-
4.2, Table 1of IS:21 (Designation 31000)(Lead)	-	800	-
4.2, Table 1of IS:21 (Designation 31000)(Chromium)	-	800	-
4.2, Table 1of IS:21 (Designation 31000)(Titanium and or other grain refining elements)	-	800	-
4.2, Table 1of IS:21 (Designation 31000)(Zinc)	-	800	-
4.2, Table 1of IS:21 (Designation 31000)(Manganese)	-	800	-
4.2, Table 1of IS:21 (Designation 31000)(Iron)	-	800	-
4.2, Table 1of IS:21 (Designation 31000)(Silicon)	-	800	-
4.2, Table 1of IS:21 (Designation 31000)(Magnesium)	-	800	-
4.2, Table 1of IS:21 (Designation 31000)(Copper)	-	800	-
4.2, Table 1of IS:21 (Designation 19600)(Aluminium)	-	800	-
4.2, Table 1of IS:21 (Designation 19600)(Cu+Si+Fe+Mn+Zn)	-	800	-
4.2, Table 1of IS:21 (Designation 19500)(Aluminium)	-	800	-
4.2, Table 1of IS:21 (Designation 19500)(Cu+Si+Fe+Mn+Zn)	-	800	-
4.2, Table 1of IS:21 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	800	-
4.2, Table 1of IS:21 (Designation 19000)(Aluminium)	-	800	-
4.2, Table 1of IS:21 (Designation 19600)(Lead)	-	800	-
4.2, Table 1of IS:21 (Designation 19500)(Lead)	-	800	-
4.2, Table 1of IS:21 (Designation 19000)(Lead)	-	800	-
4.2, Table 1of IS:21 (Designation 19600)(Zinc)	-	800	-
4.2, Table 1of IS:21 (Designation 19500)(Zinc)	-	800	-
4.2, Table 1of IS:21 (Designation 19000)(Zinc)	-	800	-
4.2, Table 1of IS:21 (Designation 19600)(Manganese)	-	800	-
4.2, Table 1of IS:21 (Designation 19500)(Manganese)	-	800	-
4.2, Table 1of IS:21 (Designation 19000)(Manganese)	-	800	-
4.2, Table 1of IS:21 (Designation 19600)(Iron)	-	800	-
4.2, Table 1of IS:21 (Designation 19500)(Iron)	-	800	-
4.2, Table 1of IS:21 (Designation 19000)(Iron)	-	800	-
4.2, Table 1of IS:21 (Designation 19600)(Silicon)	-	800	-
4.2, Table 1of IS:21 (Designation 19500)(Silicon)	-	800	-
4.2, Table 1of IS:21 (Designation 19000)(Silicon)	-	800	-
4.2, Table 1of IS:21 (Designation 19600)(Copper)	-	800	-
4.2, Table 1of IS:21 (Designation 19500)(Copper)	-	800	-
4.2, Table 1of IS:21 (Designation 19000)(Copper)	-	800	-
4.2, Table 1of IS:21 (Designation 19000)(Magnesium)	-	800	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Tensile Strength)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(0.2 Percent Proof Stress)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(0.2 Percent Proof Stress)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(0.2 Percent Proof Stress)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(0.2 Percent Proof Stress)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(0.2 Percent Proof Stress)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(0.2 Percent Proof Stress)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(0.2 Percent Proof Stress)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(0.2 Percent Proof Stress)	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 40800, 'O')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19600, 'O')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Bend Test (Radius of Bend))	-	2000	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Bend Test (Radius of Bend))	-	2000	-
5(Marking)	-	300	-

26 Sep, 2027

-
-

2463

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 11188 : Part 1 (2021)

Vault Strong Room doors Part 1 specification

298000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1 (3)(Fire and stream hose IS 11188 (Part 3))	-	15000	-
11.1 (2)(Fire endurance IS 11188 (Part 3))	-	150000	-
11.1 (1)(Burglary resistance IS 11188 (Part 2))	-	150000	-
10.4(Alternate to Cl 10.4)	-	15000	-
10.3(Cross Hatch Test)	-	15000	-
10(FINISH)	-	15000	-
9.4(Vault Lighting Control)	-	15000	-
9.3(Foot Bridge)	-	15000	-
9.2(Handles)	-	15000	-
9.1.1(Adjusting Bolt)	-	15000	-
9.1(Hinges)	-	15000	-
9(DOOR FITTINGS)	-	15000	-
8.4.5(Automatic Relocking Device)	-	15000	-
8.4.4(Time Lock)	-	15000	-
8.4(Lock)	-	15000	-
8.3.2.2(Construction)	-	15000	-
8.3.2.1(The number of bolts and their minimum dimension)	-	15000	-
8.3.2(Bolt Work)	-	15000	-
8.3.1(Lock Case)	-	15000	-
8.3(Locking Mechanism)	-	15000	-
8.2.3(Crane Hinge Mechanism)	-	15000	-
8.2.2(Compression Mechanism)	-	15000	-
8.2.1(Rebate of the Door Frame)	-	15000	-
8.2(Doors Frame)	-	15000	-
8.1.2(Main Door (Outside))	-	15000	-
8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1 Fig. 1(Doors)	-	15000	-
8(CONSTRUCTION AND GENERALREQUIREMENTS)	-	15000	-
5 Table 1(bolts, Min)	-	15000	-
5 Table 1(xix) Depth of engagement of shooting)	-	15000	-
5 Table 1(cross sectional area, Min,sq mm)	-	15000	-
5 Table 1(xviii) Diameter of shooting bolts, Min)	-	15000	-
5 Table 1(xvi) Number of shooting bolts at top,Min)	-	15000	-
5 Table 1(xv) Number of shooting bolts on opposite side,Min)	-	15000	-
5 Table 1(xiv) Number of shooting bolts on hinge side, Min)	-	15000	-
5 Table 1(xiii) Number of locks)	-	15000	-
5 Table 1(xii) Wall thickness (recommendation))	-	15000	-
5 Table 1(xi) Thickness of drill and oxyacetylene torch resisting layer (excluding mild steel plates),Min)	-	15000	-
5 Table 1(ix) Thickness of doors slab, thickness over rebate)	-	15000	-
5 Table 1(viii) Pitch of grill gate rods)	-	15000	-
5 Table 1(vii) Diameter of grill gate rods, Min)	-	15000	-
5 Table 1(vi) Thickens of grill gate angles or section made out of M.S. plates, Min)	-	15000	-
5 Table 1(v) Dimension of the rebate coming under shear)	-	15000	-
5 Table 1(iv (b) Thickness of door frame, if fabricated from single plate to form channel/multi-bend section, Min)	-	15000	-
5 Table 1(ii (a) Height H, Min b) Width W, Min iv(a) Thickness of door frame angle, channel or section made out of M.S. plates, if built up to form a channel,Min)	-	15000	-
5 Table 1(iii) Inside dimension or clear opening when door shutters are swung open at 180 degree)	-	15000	-
5 Table 1(ii (b) Width W)	-	15000	-
5 Table 1(ii (a) Height, H)	-	15000	-
5 Table 1(ii) Overall dimension of vault door)	-	15000	-
5 Table 1(i) Door Type)	-	15000	-
4(Type)	-	15000	-
5(Table-1)(Type of Door)	-	15000	-
5(Table-1)(Overall dimesion of door)	-	15000	-
5(Table-1)(Inside dimension or clear opening of door)	-	15000	-
5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel)	-	15000	-
5(Table-1)(Thickness of door frame ,if fabricated or multibend)	-	15000	-
5(Table-1)(Dimension of the rebate coming under share)	-	15000	-
5(Table-1)(Thickness of grill gate angle/section)	-	15000	-
5(Table-1)(Diameter of grill gate rod)	-	15000	-
5(Table-1)(Pitch of grill gate rod)	-	15000	-
5(Table-1)(Thickness of door slab,thickness over rebate)	-	15000	-
5(Table-1)(Thickness of the door over lock)	-	15000	-
5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate)	-	15000	-
5(Table-1)(Wall thickness)	-	15000	-
5(Table-1)(Number of locks)	-	15000	-
5(Table-1)(Number of shooting bolys on hinge side)	-	15000	-
5(Table-1)(Number of shooting bolts on opposite)	-	15000	-
5(Table-1)(Number of shooting bolts at top)	-	15000	-
5(Table-1)(Number of shooting bolts at bottom)	-	15000	-
5(Table-1)(Cross sectional area as per shooting bolt)	-	15000	-
5(Table-1)(Depth engagement of shooting)	-	15000	-
6(Materail)	-	15000	-
7(Classification)	-	15000	-
8 & 8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1.1.1(Locking device (unpickable dual control lock))	-	15000	-
8.1.2(Main Door- Outer & inner plate thickness)	-	15000	-
8.1.2.1(Door(Finish &Gap of frame/edge with any place))	-	15000	-
8.2(Door frame (No.of barckets & Size for gripping))	-	15000	-
8.2.1(Rebate of the door frame)	-	15000	-
8.2.2(Compression mechanism)	-	15000	-
8.2.3(Crane hinge mechanism)	-	15000	-
8.3(Lock case)	-	15000	-
8.3.2(Bolt work)	-	15000	-
8.3.2.2(Construction (of bolt work))	-	15000	-
8.3.2.3(Bearing piller)	-	15000	-
8.4.1(Shooting bolt control (By lock))	-	15000	-
8.4.2(Test of key-Lock)	-	15000	-
8.4.3(Lock fixing bolts)	-	15000	-
8.4.4(Time lock)	-	15000	-
8.4.5(Automatic Relocking devise)	-	15000	-
9 &9.1(Hinges)	-	15000	-
9.1.1(Adjusting bolt)	-	15000	-
9.2(Handles)	-	15000	-
9.3(Foot bringe)	-	15000	-
9.4(Vault lighting control)	-	15000	-
10 &10.1(Dents,Burrs & Edges)	-	15000	-
10.2(Colour coating thickness (Surafce paint))	-	15000	-
10.3(Cross Hatch test)	-	15000	-
10.4(Door (Stainless cladding))	-	15000	-
11.1 &11.2(Test criteria for confomity -Burglaty attack)	-	15000	-
11.1 &11.2(Test criteria for confomity -Fire resistancey)	-	15000	-
12(Marking of door)	-	15000	-
12.2(Marking on keys)	-	15000	-
4(Type)	-	15000	-
5(Table-1)(5(Table-1))	-	15000	-
5(Table-1)(Overall dimesion of door)	-	15000	-
5(Table-1)(Inside dimension or clear opening of door)	-	15000	-
5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel)	-	15000	-
5(Table-1)(Thickness of door frame ,if fabricated or multibend)	-	15000	-
5(Table-1)(Dimension of the rebate coming under share)	-	15000	-
5(Table-1)(Thickness of grill gate angle/section)	-	15000	-
5(Table-1)(Diameter of grill gate rod)	-	15000	-
5(Table-1)(Pitch of grill gate rod)	-	15000	-
5(Table-1)(Thickness of door slab,thickness over rebate)	-	15000	-
5(Table-1)(Thickness of the door over lock)	-	15000	-
5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate)	-	15000	-
5(Table-1)(Wall thickness)	-	15000	-
5(Table-1)(Number of locks)	-	15000	-
5(Table-1)(Number of shooting bolys on hinge side)	-	15000	-
5(Table-1)(Number of shooting bolts at top)	-	15000	-
5(Table-1)(Number of shooting bolts at bottom)	-	15000	-
5(Table-1)(Cross sectional area as per shooting bolt)	-	15000	-
5(Table-1)(Depth engagement of shooting)	-	15000	-
6(Materail)	-	15000	-
7(Classification)	-	15000	-
8 & 8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1.1.1(Locking device (unpickable dual control lock))	-	15000	-
8.1.2(Main Door- Outer & inner plate thickness)	-	15000	-
8.1.2.1(Door(Finish &Gap of frame/edge with any place))	-	15000	-
8.2(Door frame (No.of barckets & Size for gripping))	-	15000	-
8.2.1(Rebate of the door frame)	-	15000	-
8.2.2(Compression mechanism)	-	15000	-
8.2.3(Crane hinge mechanism)	-	15000	-
8.3(Lock case)	-	15000	-
8.3.2(Bolt work)	-	15000	-
8.3.2.2(Construction (of bolt work))	-	15000	-
8.3.2.3(Bearing piller)	-	15000	-
8.4.1(Shooting bolt control (By lock))	-	15000	-
8.4.2(Test of key-Lock)	-	15000	-
8.4.3(Lock fixing bolts)	-	15000	-
8.4.4(Time lock)	-	15000	-
8.4.5(Automatic Relocking devise)	-	15000	-
9 &9.1(Hinges)	-	15000	-
9.1.1(Adjusting bolt)	-	15000	-
9.3(Foot bringe)	-	15000	-
9.4(Vault lighting control)	-	15000	-
10 &10.1(Dents,Burrs & Edges)	-	15000	-
10.2(Colour coating thickness (Surafce paint))	-	15000	-
10.3(Cross Hatch test)	-	15000	-
10.4(Door (Stainless cladding))	-	15000	-
11.1 &11.2(Test criteria for confomity -Burglaty attack)	-	15000	-
11.1 &11.2(Test criteria for confomity -Fire resistancey)	-	15000	-
12(Marking of door)	-	15000	-
12.2(Marking on keys)	-	15000	-
11.1 (3)(Fire and stream hose IS 11188 (Part 3))	-	15000	-
11.1 (2)(Fire endurance IS 11188 (Part 3))	-	150000	-
11.1 (1)(Burglary resistance IS 11188 (Part 2))	-	150000	-
10.4(Alternate to Cl 10.4)	-	15000	-
10.3(Cross Hatch Test)	-	15000	-
10(FINISH)	-	15000	-
9.4(Vault Lighting Control)	-	15000	-
9.3(Foot Bridge)	-	15000	-
9.2(Handles)	-	15000	-
9.1.1(Adjusting Bolt)	-	15000	-
9.1(Hinges)	-	15000	-
9(DOOR FITTINGS)	-	15000	-
8.4.5(Automatic Relocking Device)	-	15000	-
8.4.4(Time Lock)	-	15000	-
8.4(Lock)	-	15000	-
8.3.2.2(Construction)	-	15000	-
8.3.2.1(The number of bolts and their minimum dimension)	-	15000	-
8.3.2(Bolt Work)	-	15000	-
8.3.1(Lock Case)	-	15000	-
8.3(Locking Mechanism)	-	15000	-
8.2.3(Crane Hinge Mechanism)	-	15000	-
8.2.2(Compression Mechanism)	-	15000	-
8.2.1(Rebate of the Door Frame)	-	15000	-
8.2(Doors Frame)	-	15000	-
8.1.2(Main Door (Outside))	-	15000	-
8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1 Fig. 1(Doors)	-	15000	-
8(CONSTRUCTION AND GENERALREQUIREMENTS)	-	15000	-
5 Table 1(bolts, Min)	-	15000	-
5 Table 1(xix) Depth of engagement of shooting)	-	15000	-
5 Table 1(cross sectional area, Min,sq mm)	-	15000	-
5 Table 1(xviii) Diameter of shooting bolts, Min)	-	15000	-
5 Table 1(xvi) Number of shooting bolts at top,Min)	-	15000	-
5 Table 1(xv) Number of shooting bolts on opposite side,Min)	-	15000	-
5 Table 1(xiv) Number of shooting bolts on hinge side, Min)	-	15000	-
5 Table 1(xiii) Number of locks)	-	15000	-
5 Table 1(xii) Wall thickness (recommendation))	-	15000	-
5 Table 1(xi) Thickness of drill and oxyacetylene torch resisting layer (excluding mild steel plates),Min)	-	15000	-
5 Table 1(ix) Thickness of doors slab, thickness over rebate)	-	15000	-
5 Table 1(viii) Pitch of grill gate rods)	-	15000	-
5 Table 1(vii) Diameter of grill gate rods, Min)	-	15000	-
5 Table 1(vi) Thickens of grill gate angles or section made out of M.S. plates, Min)	-	15000	-
5 Table 1(v) Dimension of the rebate coming under shear)	-	15000	-
5 Table 1(iv (b) Thickness of door frame, if fabricated from single plate to form channel/multi-bend section, Min)	-	15000	-
5 Table 1(ii (a) Height H, Min b) Width W, Min iv(a) Thickness of door frame angle, channel or section made out of M.S. plates, if built up to form a channel,Min)	-	15000	-
5 Table 1(iii) Inside dimension or clear opening when door shutters are swung open at 180 degree)	-	15000	-
5 Table 1(ii (b) Width W)	-	15000	-
5 Table 1(ii (a) Height, H)	-	15000	-
5 Table 1(ii) Overall dimension of vault door)	-	15000	-
5 Table 1(i) Door Type)	-	15000	-
4(Type)	-	15000	-
5(Table-1)(Type of Door)	-	15000	-
5(Table-1)(Overall dimesion of door)	-	15000	-
5(Table-1)(Inside dimension or clear opening of door)	-	15000	-
5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel)	-	15000	-
5(Table-1)(Thickness of door frame ,if fabricated or multibend)	-	15000	-
5(Table-1)(Dimension of the rebate coming under share)	-	15000	-
5(Table-1)(Thickness of grill gate angle/section)	-	15000	-
5(Table-1)(Diameter of grill gate rod)	-	15000	-
5(Table-1)(Pitch of grill gate rod)	-	15000	-
5(Table-1)(Thickness of door slab,thickness over rebate)	-	15000	-
5(Table-1)(Thickness of the door over lock)	-	15000	-
5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate)	-	15000	-
5(Table-1)(Wall thickness)	-	15000	-
5(Table-1)(Number of locks)	-	15000	-
5(Table-1)(Number of shooting bolys on hinge side)	-	15000	-
5(Table-1)(Number of shooting bolts on opposite)	-	15000	-
5(Table-1)(Number of shooting bolts at top)	-	15000	-
5(Table-1)(Number of shooting bolts at bottom)	-	15000	-
5(Table-1)(Cross sectional area as per shooting bolt)	-	15000	-
5(Table-1)(Depth engagement of shooting)	-	15000	-
6(Materail)	-	15000	-
7(Classification)	-	15000	-
8 & 8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1.1.1(Locking device (unpickable dual control lock))	-	15000	-
8.1.2(Main Door- Outer & inner plate thickness)	-	15000	-
8.1.2.1(Door(Finish &Gap of frame/edge with any place))	-	15000	-
8.2(Door frame (No.of barckets & Size for gripping))	-	15000	-
8.2.1(Rebate of the door frame)	-	15000	-
8.2.2(Compression mechanism)	-	15000	-
8.2.3(Crane hinge mechanism)	-	15000	-
8.3(Lock case)	-	15000	-
8.3.2(Bolt work)	-	15000	-
8.3.2.2(Construction (of bolt work))	-	15000	-
8.3.2.3(Bearing piller)	-	15000	-
8.4.1(Shooting bolt control (By lock))	-	15000	-
8.4.2(Test of key-Lock)	-	15000	-
8.4.3(Lock fixing bolts)	-	15000	-
8.4.4(Time lock)	-	15000	-
8.4.5(Automatic Relocking devise)	-	15000	-
9 &9.1(Hinges)	-	15000	-
9.1.1(Adjusting bolt)	-	15000	-
9.2(Handles)	-	15000	-
9.3(Foot bringe)	-	15000	-
9.4(Vault lighting control)	-	15000	-
10 &10.1(Dents,Burrs & Edges)	-	15000	-
10.2(Colour coating thickness (Surafce paint))	-	15000	-
10.3(Cross Hatch test)	-	15000	-
10.4(Door (Stainless cladding))	-	15000	-
11.1 &11.2(Test criteria for confomity -Burglaty attack)	-	15000	-
11.1 &11.2(Test criteria for confomity -Fire resistancey)	-	15000	-
12(Marking of door)	-	15000	-
12.2(Marking on keys)	-	15000	-
4(Type)	-	15000	-
5(Table-1)(5(Table-1))	-	15000	-
5(Table-1)(Overall dimesion of door)	-	15000	-
5(Table-1)(Inside dimension or clear opening of door)	-	15000	-
5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel)	-	15000	-
5(Table-1)(Thickness of door frame ,if fabricated or multibend)	-	15000	-
5(Table-1)(Dimension of the rebate coming under share)	-	15000	-
5(Table-1)(Thickness of grill gate angle/section)	-	15000	-
5(Table-1)(Diameter of grill gate rod)	-	15000	-
5(Table-1)(Pitch of grill gate rod)	-	15000	-
5(Table-1)(Thickness of door slab,thickness over rebate)	-	15000	-
5(Table-1)(Thickness of the door over lock)	-	15000	-
5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate)	-	15000	-
5(Table-1)(Wall thickness)	-	15000	-
5(Table-1)(Number of locks)	-	15000	-
5(Table-1)(Number of shooting bolys on hinge side)	-	15000	-
5(Table-1)(Number of shooting bolts at top)	-	15000	-
5(Table-1)(Number of shooting bolts at bottom)	-	15000	-
5(Table-1)(Cross sectional area as per shooting bolt)	-	15000	-
5(Table-1)(Depth engagement of shooting)	-	15000	-
6(Materail)	-	15000	-
7(Classification)	-	15000	-
8 & 8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1.1.1(Locking device (unpickable dual control lock))	-	15000	-
8.1.2(Main Door- Outer & inner plate thickness)	-	15000	-
8.1.2.1(Door(Finish &Gap of frame/edge with any place))	-	15000	-
8.2(Door frame (No.of barckets & Size for gripping))	-	15000	-
8.2.1(Rebate of the door frame)	-	15000	-
8.2.2(Compression mechanism)	-	15000	-
8.2.3(Crane hinge mechanism)	-	15000	-
8.3(Lock case)	-	15000	-
8.3.2(Bolt work)	-	15000	-
8.3.2.2(Construction (of bolt work))	-	15000	-
8.3.2.3(Bearing piller)	-	15000	-
8.4.1(Shooting bolt control (By lock))	-	15000	-
8.4.2(Test of key-Lock)	-	15000	-
8.4.3(Lock fixing bolts)	-	15000	-
8.4.4(Time lock)	-	15000	-
8.4.5(Automatic Relocking devise)	-	15000	-
9 &9.1(Hinges)	-	15000	-
9.1.1(Adjusting bolt)	-	15000	-
9.3(Foot bringe)	-	15000	-
9.4(Vault lighting control)	-	15000	-
10 &10.1(Dents,Burrs & Edges)	-	15000	-
10.2(Colour coating thickness (Surafce paint))	-	15000	-
10.3(Cross Hatch test)	-	15000	-
10.4(Door (Stainless cladding))	-	15000	-
11.1 &11.2(Test criteria for confomity -Burglaty attack)	-	15000	-
11.1 &11.2(Test criteria for confomity -Fire resistancey)	-	15000	-
12(Marking of door)	-	5000	-
12.2(Marking on keys)	-	5000	-
11.1 (3)(Fire and stream hose IS 11188 (Part 3))	-	15000	-
11.1 (2)(Fire endurance IS 11188 (Part 3))	-	150000	-
11.1 (1)(Burglary resistance IS 11188 (Part 2))	-	150000	-
10.4(Alternate to Cl 10.4)	-	15000	-
10.3(Cross Hatch Test)	-	15000	-
10(FINISH)	-	15000	-
9.4(Vault Lighting Control)	-	15000	-
9.3(Foot Bridge)	-	15000	-
9.2(Handles)	-	15000	-
9.1.1(Adjusting Bolt)	-	15000	-
9.1(Hinges)	-	15000	-
9(DOOR FITTINGS)	-	15000	-
8.4.5(Automatic Relocking Device)	-	15000	-
8.4.4(Time Lock)	-	15000	-
8.4(Lock)	-	15000	-
8.3.2.2(Construction)	-	15000	-
8.3.2.1(The number of bolts and their minimum dimension)	-	15000	-
8.3.2(Bolt Work)	-	15000	-
8.3.1(Lock Case)	-	15000	-
8.3(Locking Mechanism)	-	15000	-
8.2.3(Crane Hinge Mechanism)	-	15000	-
8.2.2(Compression Mechanism)	-	15000	-
8.2.1(Rebate of the Door Frame)	-	15000	-
8.2(Doors Frame)	-	15000	-
8.1.2(Main Door (Outside))	-	15000	-
8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1 Fig. 1(Doors)	-	15000	-
8(CONSTRUCTION AND GENERALREQUIREMENTS)	-	15000	-
5 Table 1(bolts, Min)	-	15000	-
5 Table 1(xix) Depth of engagement of shooting)	-	15000	-
5 Table 1(cross sectional area, Min,sq mm)	-	15000	-
5 Table 1(xviii) Diameter of shooting bolts, Min)	-	15000	-
5 Table 1(xvi) Number of shooting bolts at top,Min)	-	15000	-
5 Table 1(xv) Number of shooting bolts on opposite side,Min)	-	15000	-
5 Table 1(xiv) Number of shooting bolts on hinge side, Min)	-	15000	-
5 Table 1(xiii) Number of locks)	-	15000	-
5 Table 1(xii) Wall thickness (recommendation))	-	15000	-
5 Table 1(xi) Thickness of drill and oxyacetylene torch resisting layer (excluding mild steel plates),Min)	-	15000	-
5 Table 1(ix) Thickness of doors slab, thickness over rebate)	-	15000	-
5 Table 1(viii) Pitch of grill gate rods)	-	15000	-
5 Table 1(vii) Diameter of grill gate rods, Min)	-	15000	-
5 Table 1(vi) Thickens of grill gate angles or section made out of M.S. plates, Min)	-	15000	-
5 Table 1(v) Dimension of the rebate coming under shear)	-	15000	-
5 Table 1(iv (b) Thickness of door frame, if fabricated from single plate to form channel/multi-bend section, Min)	-	15000	-
5 Table 1(ii (a) Height H, Min b) Width W, Min iv(a) Thickness of door frame angle, channel or section made out of M.S. plates, if built up to form a channel,Min)	-	15000	-
5 Table 1(iii) Inside dimension or clear opening when door shutters are swung open at 180 degree)	-	15000	-
5 Table 1(ii (b) Width W)	-	15000	-
5 Table 1(ii (a) Height, H)	-	15000	-
5 Table 1(ii) Overall dimension of vault door)	-	15000	-
5 Table 1(i) Door Type)	-	15000	-
4(Type)	-	15000	-
5(Table-1)(Type of Door)	-	15000	-
5(Table-1)(Overall dimesion of door)	-	15000	-
5(Table-1)(Inside dimension or clear opening of door)	-	15000	-
5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel)	-	15000	-
5(Table-1)(Thickness of door frame ,if fabricated or multibend)	-	15000	-
5(Table-1)(Dimension of the rebate coming under share)	-	15000	-
5(Table-1)(Thickness of grill gate angle/section)	-	15000	-
5(Table-1)(Diameter of grill gate rod)	-	15000	-
5(Table-1)(Pitch of grill gate rod)	-	15000	-
5(Table-1)(Thickness of door slab,thickness over rebate)	-	15000	-
5(Table-1)(Thickness of the door over lock)	-	15000	-
5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate)	-	15000	-
5(Table-1)(Wall thickness)	-	15000	-
5(Table-1)(Number of locks)	-	15000	-
5(Table-1)(Number of shooting bolys on hinge side)	-	15000	-
5(Table-1)(Number of shooting bolts on opposite)	-	15000	-
5(Table-1)(Number of shooting bolts at top)	-	15000	-
5(Table-1)(Number of shooting bolts at bottom)	-	15000	-
5(Table-1)(Cross sectional area as per shooting bolt)	-	15000	-
5(Table-1)(Depth engagement of shooting)	-	15000	-
6(Materail)	-	15000	-
7(Classification)	-	15000	-
8 & 8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1.1.1(Locking device (unpickable dual control lock))	-	15000	-
8.1.2(Main Door- Outer & inner plate thickness)	-	15000	-
8.1.2.1(Door(Finish &Gap of frame/edge with any place))	-	15000	-
8.2(Door frame (No.of barckets & Size for gripping))	-	15000	-
8.2.1(Rebate of the door frame)	-	15000	-
8.2.2(Compression mechanism)	-	15000	-
8.2.3(Crane hinge mechanism)	-	15000	-
8.3(Lock case)	-	15000	-
8.3.2(Bolt work)	-	15000	-
8.3.2.2(Construction (of bolt work))	-	15000	-
8.3.2.3(Bearing piller)	-	15000	-
8.4.1(Shooting bolt control (By lock))	-	15000	-
8.4.2(Test of key-Lock)	-	15000	-
8.4.3(Lock fixing bolts)	-	15000	-
8.4.4(Time lock)	-	15000	-
8.4.5(Automatic Relocking devise)	-	15000	-
9 &9.1(Hinges)	-	15000	-
9.1.1(Adjusting bolt)	-	15000	-
9.2(Handles)	-	15000	-
9.3(Foot bringe)	-	15000	-
9.4(Vault lighting control)	-	15000	-
10 &10.1(Dents,Burrs & Edges)	-	15000	-
10.2(Colour coating thickness (Surafce paint))	-	15000	-
10.3(Cross Hatch test)	-	15000	-
10.4(Door (Stainless cladding))	-	15000	-
11.1 &11.2(Test criteria for confomity -Burglaty attack)	-	15000	-
11.1 &11.2(Test criteria for confomity -Fire resistancey)	-	15000	-
12(Marking of door)	-	15000	-
12.2(Marking on keys)	-	15000	-
4(Type)	-	15000	-
5(Table-1)(5(Table-1))	-	15000	-
5(Table-1)(Overall dimesion of door)	-	15000	-
5(Table-1)(Inside dimension or clear opening of door)	-	15000	-
5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel)	-	15000	-
5(Table-1)(Thickness of door frame ,if fabricated or multibend)	-	15000	-
5(Table-1)(Dimension of the rebate coming under share)	-	15000	-
5(Table-1)(Thickness of grill gate angle/section)	-	15000	-
5(Table-1)(Diameter of grill gate rod)	-	15000	-
5(Table-1)(Pitch of grill gate rod)	-	15000	-
5(Table-1)(Thickness of door slab,thickness over rebate)	-	15000	-
5(Table-1)(Thickness of the door over lock)	-	15000	-
5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate)	-	15000	-
5(Table-1)(Wall thickness)	-	15000	-
5(Table-1)(Number of locks)	-	15000	-
5(Table-1)(Number of shooting bolys on hinge side)	-	15000	-
5(Table-1)(Number of shooting bolts at top)	-	15000	-
5(Table-1)(Number of shooting bolts at bottom)	-	15000	-
5(Table-1)(Cross sectional area as per shooting bolt)	-	15000	-
5(Table-1)(Depth engagement of shooting)	-	15000	-
6(Materail)	-	15000	-
7(Classification)	-	15000	-
8 & 8.1.1(Ventilating Grill Gate (Inside))	-	15000	-
8.1.1.1(Locking device (unpickable dual control lock))	-	15000	-
8.1.2(Main Door- Outer & inner plate thickness)	-	15000	-
8.1.2.1(Door(Finish &Gap of frame/edge with any place))	-	15000	-
8.2(Door frame (No.of barckets & Size for gripping))	-	15000	-
8.2.1(Rebate of the door frame)	-	15000	-
8.2.2(Compression mechanism)	-	15000	-
8.2.3(Crane hinge mechanism)	-	15000	-
8.3(Lock case)	-	15000	-
8.3.2(Bolt work)	-	15000	-
8.3.2.2(Construction (of bolt work))	-	15000	-
8.3.2.3(Bearing piller)	-	15000	-
8.4.1(Shooting bolt control (By lock))	-	15000	-
8.4.2(Test of key-Lock)	-	15000	-
8.4.3(Lock fixing bolts)	-	15000	-
8.4.4(Time lock)	-	15000	-
8.4.5(Automatic Relocking devise)	-	15000	-
9 &9.1(Hinges)	-	15000	-
9.1.1(Adjusting bolt)	-	15000	-
9.3(Foot bringe)	-	15000	-
9.4(Vault lighting control)	-	15000	-
10 &10.1(Dents,Burrs & Edges)	-	15000	-
10.2(Colour coating thickness (Surafce paint))	-	15000	-
10.3(Cross Hatch test)	-	15000	-
10.4(Door (Stainless cladding))	-	15000	-
11.1 &11.2(Test criteria for confomity -Burglaty attack)	-	15000	-
11.1 &11.2(Test criteria for confomity -Fire resistancey)	-	15000	-
12(Marking of door)	-	15000	-
12.2(Marking on keys)	-	15000	-

14 Nov, 2027

-
Included w.e.f. 28.03.2025

2464

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 11188 : Part 1 (2021)

Vault Strong Room doors Part 1 specification

ALL

349000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1 (3)(Fire and stream hose IS 11188 (Part 3))	-	349000	-
11.1 (2)(Fire endurance IS 11188 (Part 3))	-	349000	-
11.1 (1)(Burglary resistance IS 11188 (Part 2))	-	349000	-
10.4(Alternate to Cl 10.4)	-	349000	-
10.3(Cross Hatch Test)	-	349000	-
10(FINISH)	-	349000	-
9.4(Vault Lighting Control)	-	349000	-
9.3(Foot Bridge)	-	349000	-
9.2(Handles)	-	349000	-
9.1.1(Adjusting Bolt)	-	349000	-
9.1(Hinges)	-	349000	-
9(DOOR FITTINGS)	-	349000	-
8.4.5(Automatic Relocking Device)	-	349000	-
8.4.4(Time Lock)	-	349000	-
8.4(Lock)	-	349000	-
8.3.2.2(Construction)	-	349000	-
8.3.2.1(The number of bolts and their minimum dimension)	-	349000	-
8.3.2(Bolt Work)	-	349000	-
8.3.1(Lock Case)	-	349000	-
8.3(Locking Mechanism)	-	349000	-
8.2.3(Crane Hinge Mechanism)	-	349000	-
8.2.2(Compression Mechanism)	-	349000	-
8.2.1(Rebate of the Door Frame)	-	349000	-
8.2(Doors Frame)	-	349000	-
8.1.2(Main Door (Outside))	-	349000	-
8.1.1(Ventilating Grill Gate (Inside))	-	349000	-
8.1 Fig. 1(Doors)	-	349000	-
8(CONSTRUCTION AND GENERALREQUIREMENTS)	-	349000	-
5 Table 1(bolts, Min)	-	349000	-
5 Table 1(xix) Depth of engagement of shooting)	-	349000	-
5 Table 1(cross sectional area, Min,sq mm)	-	349000	-
5 Table 1(xviii) Diameter of shooting bolts, Min)	-	349000	-
5 Table 1(xvi) Number of shooting bolts at top,Min)	-	349000	-
5 Table 1(xv) Number of shooting bolts on opposite side,Min)	-	349000	-
5 Table 1(xiv) Number of shooting bolts on hinge side, Min)	-	349000	-
5 Table 1(xiii) Number of locks)	-	349000	-
5 Table 1(xii) Wall thickness (recommendation))	-	349000	-
5 Table 1(xi) Thickness of drill and oxyacetylene torch resisting layer (excluding mild steel plates),Min)	-	349000	-
5 Table 1(ix) Thickness of doors slab, thickness over rebate)	-	349000	-
5 Table 1(viii) Pitch of grill gate rods)	-	349000	-
5 Table 1(vii) Diameter of grill gate rods, Min)	-	349000	-
5 Table 1(vi) Thickens of grill gate angles or section made out of M.S. plates, Min)	-	349000	-
5 Table 1(v) Dimension of the rebate coming under shear)	-	349000	-
5 Table 1(iv (b) Thickness of door frame, if fabricated from single plate to form channel/multi-bend section, Min)	-	349000	-
5 Table 1(ii (a) Height H, Min b) Width W, Min iv(a) Thickness of door frame angle, channel or section made out of M.S. plates, if built up to form a channel,Min)	-	349000	-
5 Table 1(iii) Inside dimension or clear opening when door shutters are swung open at 180 degree)	-	349000	-
5 Table 1(ii (b) Width W)	-	349000	-
5 Table 1(ii (a) Height, H)	-	349000	-
5 Table 1(ii) Overall dimension of vault door)	-	349000	-
5 Table 1(i) Door Type)	-	349000	-
4(Type)	-	349000	-
5(Table-1)(Type of Door)	-	349000	-
5(Table-1)(Overall dimesion of door)	-	349000	-
5(Table-1)(Inside dimension or clear opening of door)	-	349000	-
5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel)	-	349000	-
5(Table-1)(Thickness of door frame ,if fabricated or multibend)	-	349000	-
5(Table-1)(Dimension of the rebate coming under share)	-	349000	-
5(Table-1)(Thickness of grill gate angle/section)	-	349000	-
5(Table-1)(Diameter of grill gate rod)	-	349000	-
5(Table-1)(Pitch of grill gate rod)	-	349000	-
5(Table-1)(Thickness of door slab,thickness over rebate)	-	349000	-
5(Table-1)(Thickness of the door over lock)	-	349000	-
5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate)	-	349000	-
5(Table-1)(Wall thickness)	-	349000	-
5(Table-1)(Number of locks)	-	349000	-
5(Table-1)(Number of shooting bolys on hinge side)	-	349000	-
5(Table-1)(Number of shooting bolts on opposite)	-	349000	-
5(Table-1)(Number of shooting bolts at top)	-	349000	-
5(Table-1)(Number of shooting bolts at bottom)	-	349000	-
5(Table-1)(Cross sectional area as per shooting bolt)	-	349000	-
5(Table-1)(Depth engagement of shooting)	-	349000	-
6(Materail)	-	349000	-
7(Classification)	-	349000	-
8 & 8.1.1(Ventilating Grill Gate (Inside))	-	349000	-
8.1.1.1(Locking device (unpickable dual control lock))	-	349000	-
8.1.2(Main Door- Outer & inner plate thickness)	-	349000	-
8.1.2.1(Door(Finish &Gap of frame/edge with any place))	-	349000	-
8.2(Door frame (No.of barckets & Size for gripping))	-	349000	-
8.2.1(Rebate of the door frame)	-	349000	-
8.2.2(Compression mechanism)	-	349000	-
8.2.3(Crane hinge mechanism)	-	349000	-
8.3(Lock case)	-	349000	-
8.3.2(Bolt work)	-	349000	-
8.3.2.2(Construction (of bolt work))	-	349000	-
8.3.2.3(Bearing piller)	-	349000	-
8.4.1(Shooting bolt control (By lock))	-	349000	-
8.4.2(Test of key-Lock)	-	349000	-
8.4.3(Lock fixing bolts)	-	349000	-
8.4.4(Time lock)	-	349000	-
8.4.5(Automatic Relocking devise)	-	349000	-
9 &9.1(Hinges)	-	349000	-
9.1.1(Adjusting bolt)	-	349000	-
9.2(Handles)	-	349000	-
9.3(Foot bringe)	-	349000	-
9.4(Vault lighting control)	-	349000	-
10 &10.1(Dents,Burrs & Edges)	-	349000	-
10.2(Colour coating thickness (Surafce paint))	-	349000	-
10.3(Cross Hatch test)	-	349000	-
10.4(Door (Stainless cladding))	-	349000	-
11.1 &11.2(Test criteria for confomity -Burglaty attack)	-	349000	-
11.1 &11.2(Test criteria for confomity -Fire resistancey)	-	349000	-
12(Marking of door)	-	349000	-
12.2(Marking on keys)	-	349000	-
4(Type)	-	349000	-
5(Table-1)(5(Table-1))	-	349000	-
5(Table-1)(Overall dimesion of door)	-	349000	-
5(Table-1)(Inside dimension or clear opening of door)	-	349000	-
5(Table-1)(Thickness of door frame angle-made of Plate,if bulit up to form a channel)	-	349000	-
5(Table-1)(Thickness of door frame ,if fabricated or multibend)	-	349000	-
5(Table-1)(Dimension of the rebate coming under share)	-	349000	-
5(Table-1)(Thickness of grill gate angle/section)	-	349000	-
5(Table-1)(Diameter of grill gate rod)	-	349000	-
5(Table-1)(Pitch of grill gate rod)	-	349000	-
5(Table-1)(Thickness of door slab,thickness over rebate)	-	349000	-
5(Table-1)(Thickness of the door over lock)	-	349000	-
5(Table-1)(Thickness of drill & oxyacetylene torch resis. layer(exclue MS plate)	-	349000	-
5(Table-1)(Wall thickness)	-	349000	-
5(Table-1)(Number of locks)	-	349000	-
5(Table-1)(Number of shooting bolys on hinge side)	-	349000	-
5(Table-1)(Number of shooting bolts at top)	-	349000	-
5(Table-1)(Number of shooting bolts at bottom)	-	349000	-
5(Table-1)(Cross sectional area as per shooting bolt)	-	349000	-
5(Table-1)(Depth engagement of shooting)	-	349000	-
6(Materail)	-	349000	-
7(Classification)	-	349000	-
8 & 8.1.1(Ventilating Grill Gate (Inside))	-	349000	-
8.1.1.1(Locking device (unpickable dual control lock))	-	349000	-
8.1.2(Main Door- Outer & inner plate thickness)	-	349000	-
8.1.2.1(Door(Finish &Gap of frame/edge with any place))	-	349000	-
8.2(Door frame (No.of barckets & Size for gripping))	-	349000	-
8.2.1(Rebate of the door frame)	-	349000	-
8.2.2(Compression mechanism)	-	349000	-
8.2.3(Crane hinge mechanism)	-	349000	-
8.3(Lock case)	-	349000	-
8.3.2(Bolt work)	-	349000	-
8.3.2.2(Construction (of bolt work))	-	349000	-
8.3.2.3(Bearing piller)	-	349000	-
8.4.1(Shooting bolt control (By lock))	-	349000	-
8.4.2(Test of key-Lock)	-	349000	-
8.4.3(Lock fixing bolts)	-	349000	-
8.4.4(Time lock)	-	349000	-
8.4.5(Automatic Relocking devise)	-	349000	-
9 &9.1(Hinges)	-	349000	-
9.1.1(Adjusting bolt)	-	349000	-
9.3(Foot bringe)	-	349000	-
9.4(Vault lighting control)	-	349000	-
10 &10.1(Dents,Burrs & Edges)	-	349000	-
10.2(Colour coating thickness (Surafce paint))	-	349000	-
10.3(Cross Hatch test)	-	349000	-
10.4(Door (Stainless cladding))	-	349000	-
11.1 &11.2(Test criteria for confomity -Burglaty attack)	-	349000	-
11.1 &11.2(Test criteria for confomity -Fire resistancey)	-	349000	-
12(Marking of door)	-	349000	-
12.2(Marking on keys)	-	349000	-

08 Feb, 2027

-
Included w.e.f. 01.04.2025

2465

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 5244 (2020)

Safe Deposit Locker Cabinets — Specification ( Fourth Revision )

39500 View breakup
-

Clause No.	Exclusion	Remark
Cl. 4.1( Types )	-	-
Cl. 6 (Fig-5)(Cabinet Size (in mm))	-	-
Table 1(Thickness Min. (in mm))	-	-
Table 1(Thickness Min. (in mm))	-	-
Table 1(Thickness Min. (in mm))	-	-
Table 1(Thickness Min. (in mm))	-	-
Table 1(Thickness Min. (in mm))	-	-
Table 1(Thickness Min. (in mm))	-	-
Table 1(Thickness Min. (in mm))	-	-
Table 1(Thickness Min. (in mm))	-	-
Table 1(Thickness Min. (in mm))	-	-
Table 1(Thickness Min. (in mm))	-	-
Table 1(Finish)	-	-
Table 1(Finish)	-	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	-
Cl. 7.1(Design and Manufacture)	-	-
Cl. 7.1(Design and Manufacture)	-	-
Cl. 7.1(Design and Manufacture)	-	-
Cl. 7.1(Design and Manufacture)	-	-
Cl. 7.1(Design and Manufacture)	-	-
Cl. 7.2(Design and Manufacture)	-	-
Cl. 7.3(Design and Manufacture)	-	-
Cl. 7.3(Design and Manufacture)	-	-
Cl. 7.4(Design and Manufacture)	-	-
Cl. 7.5(Design and Manufacture)	-	-
Cl. 7.6(Design and Manufacture)	-	-
Cl. 8(Workmanship)	-	-
Cl. 8.2(Tolerance)	-	-
Cl. 9.1(Testing)	-	-
Cl. 9.2(Testing)	-	-
Cl. 9.3(Cross Hatch Test)	-	-
Cl. 10.1(Marking)	-	-
Cl. 10.2(Marking)	-	-
Cl. 10.3(Marking)	-	-
Cl. 10.4(Marking on Keys)	-	-
Cl. 11(Packing)	-	-

08 Feb, 2027

-
Included w.e.f. 01.04.2025

2466

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 2347 (2017)

Domestic pressure cooker - Specification (Sixth Revision)

34000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Capacity)	-	400	-
5.1.1(Body, Lid, Containers and Grid)	-	300	-
5.1.2(Body, Lid, Containers and Grid)	-	300	-
5.1.3(Body, Lid, Containers and Grid)	-	300	-
5.1.4(Body, Lid, Containers and Grid)	-	300	-
5.2(Safety Relief Device)	-	300	-
5.3(Gasket)	-	300	-
5.4(Handles and Knobs)	-	300	-
5.5(Pressure Regulating Device)	-	300	-
5.6(Vent Seal Pin for Pressure Regulating Device)	-	300	-
5.7(Vent Pipe)	-	300	-
5.8(Vent Pipe Nut)	-	300	-
5.9(Spring)	-	300	-
6(CONSTRUCTION)	-	300	-
6.1(Pressure Regulating Device)	-	300	-
6.1.1(Pressure Regulating Device)	-	300	-
6.1.2(Pressure Regulating Device)	-	300	-
6.1.3(Pressure Regulating Device)	-	300	-
6.1.4(Pressure Regulating Device)	-	300	-
6.1.5(Pressure Regulating Device)	-	300	-
6.2(Safety Relief Device)	-	300	-
6.2.1(Safety Relief Device)	-	300	-
6.2.2(Safety Relief Device)	-	300	-
6.3.1(Temperature Responsive Pressure Relief Device)	-	400	-
6.3.1(Temperature Responsive Pressure Relief Device)	-	4000	-
6.4.1(Handles and Knobs)	-	300	-
6.4.1.1(Handles and Knobs)	-	300	-
7.1(WORKMANSHIP AND FINISH)	-	300	-
7.2(WORKMANSHIP AND FINISH)	-	300	-
7.3(WORKMANSHIP AND FINISH)	-	500	-
7.4(WORKMANSHIP AND FINISH)	-	1000	-
8.1(Air Pressure Test)	-	600	-
8.2(Proof Pressure Test)	-	600	-
8.3(Operating Test for Pressure Regulating Device)	-	800	-
8.4(Test for Safety Pressure Relief Device)	-	800	-
8.5(Bursting Pressure Test)	-	1000	-
8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-	900	-
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	900	-
8.7(Test for Spring Loaded Mechanism)	-	800	-
8.8(Test for Spring Loaded Mechanism)	-	1200	-
8.9(Test for Spring Loaded Mechanism)	-	1200	-
8.1(testing of handles of the cooker)	-	1200	-
8.4 Annex H-1.2(Test for SPRD - For Resettable Devices )	-	800	-
8.4 Annex H-1.1(Test for SPRD - For Destructible Devices )	-	800	-
8.10 (a)(Handles of the cooker- Resistance to Burning)	-	700	-
8.10 (b)(Handles of the cooker- Heat Resistance)	-	700	-
8.10 (c)(Handles of the cooker- Torque Strength)	-	700	-
8.10 (d)(Handles of the cooker- Bending Strength)	-	700	-
8.10 (e)(Handles of the cooker- Fatigue Resistance)	-	1200	-
8.10 (f)(Handles of the cooker- Thermal Insualtion Test)	-	800	-
8.10 NOTES (3)(Handles of the cooker - Proof Pressure)	-	300	-
8.10 NOTES (4)(Handles of the cooker)	-	300	-
8.10 NOTES (5)(Handles of the cooker)	-	300	-
8.10 NOTES (6)(Handles of the cooker)	-	300	-
8.11.1 (a)(External Coating (powder coating or ceramic coating or high temperature resistant liquid coating))	-	800	-
8.11.1 (b)(External Coating (powder coating or ceramic coating or high temperature resistant liquid coating))	-	800	-
8.11.1 (c)(External Coating (powder coating or ceramic coating or high temperature resistant liquid coating))	-	800	-
8.11.1.1 (Thermal shock test for externally coated cooker)	-	1200	-
8.12(Internal Coating)	-	1300	-
8.14(3 Ply Construction Cooker Body)	-	1000	-
11(Marking)	-	300	-

26 Sep, 2027

-
-

2467

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 14756 (2022)

Draft Indian Standard STAINLESS STEEL COOKWARE SPECIFICATION Second Revision of IS 14756

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Material)	-	500	-
3.2(Material)	-	500	-
3.3(Material)	-	500	-
3.4(Material)	-	500	-
3.5(Material)	-	500	-
4.1 (Annex A)(Shapes and Dimensions)	-	500	-
4.2 (Table 1)(Shapes and Dimensions)	-	500	-
4.3(Shapes and Dimensions)	-	500	-
4.4(Shapes and Dimensions)	-	500	-
6.1(Staining Test)	-	1000	-
6.2(Mechanical Shock Test (For Cladded Utensils only))	-	1000	-
6.3(Thermal Shock Test (For Cladded Utensils only))	-	1000	-
6.4(Dry Heat Test (For Cladded Utensils only))	-	1500	-
6.5(Coating Thickness Test (For Copper Deposit))	-	1000	-
6.6(3 Ply)	-	1000	-
6.7.1(Nominal Capacity Test)	-	1000	-
6.8.1(Tests on Tempered Glass Lid)	-	1000	-
6.8.2(Tests on Tempered Glass Lid (Ball drop test))	-	1000	-
6.8.3(Tests on Tempered Glass Lid (thermal shock test))	-	1000	-
6.8.4.1(Tests on Tempered Glass Lid (Free Fall Test with rim facing down))	-	1000	-
6.8.4.2(Tests on Tempered Glass Lid (Free Fall Test without rim facing down))	-	1000	-
3.4(Material)	-	500	-
3.5(Material)	-	500	-
3.5(Material)	-	500	-
3.5(Material)	-	500	-
4.2 (Table 1)(Shapes and Dimensions)	-	500	-
4.2(Shapes and Dimensions)	-	500	-
5.1(Workmanship and Finish)	-	500	-
5.1(Workmanship and Finish)	-	500	-
5.1(Workmanship and Finish)	-	500	-
5.2(Workmanship and Finish)	-	500	-
5.3(Workmanship and Finish)	-	500	-
5.3(Workmanship and Finish)	-	500	-
5.3(Workmanship and Finish)	-	500	-
5.3(Workmanship and Finish)	-	500	-
5.3(Workmanship and Finish)	-	500	-
5.3(Workmanship and Finish)	-	500	-
5.4(Workmanship and Finish)	-	500	-
5.5(Workmanship and Finish)	-	500	-
5.6(Workmanship and Finish)	-	500	-
6.1(Staining Test)	-	1000	-
6.7.2(Nominal Capacity Test- Diameter)	-	1000	-
6.8.1(Tests on Tempered Glass Lid)	-	1000	-

26 Sep, 2027

-
-

2468

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 550 : Part 1 (2022)

Safes: Part 1 specification Fifth Revision

258000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	124999.97	-
5.1(Dimensions)	-	10000	-
5.2(Sizes)	-	10000	-
5.2(Table-2)(Inside dimensions)	-	10000	-
5.2(Table-2)(Tolerance on inside dimensions)	-	10000	-
5.2(Table-2)(Internal volume)	-	10000	-
5.2(Table-2)(Tolerance on interanal volume)	-	10000	-
5.2(Table-2)(Minumum Weight)	-	10000	-
5.2(Table-2)(Thickness of Plates (outer bodys& Door))	-	10000	-
5.2(Table-2)(Thickness of Door slab)	-	10000	-
5.2(Table-2)(Thickness of door overbolt work)	-	10000	-
5.2(Table-2)(Number of lock on the door)	-	10000	-
5.2(Table-2)(Any other type of lock)	-	10000	-
5.2(Table-2)(Number of bolt on hinge side)	-	10000	-
5.2(Table-2)(Number of bolt on opposite hinge)	-	10000	-
5.2(Table-2)(No.of bolt at the top)	-	10000	-
5.2(Table-2)(No.of bolt at the bottom)	-	10000	-
5.2(Table-2)(Size of each bolt (area of bolt section))	-	10000	-
5.2(Table-2)(Depth engagement of bolt)	-	10000	-
6(Material declaration)	-	10000	-
7(Desigantion-Delaration)	-	10000	-
8.1(Body (Construction & workmanship))	-	10000	-
8.2(Door (Gap))	-	10000	-
8.4.1(Hinges)	-	10000	-
8.4.2(Bolts)	-	10000	-
8.5(Handle)	-	10000	-
8.6.1(Lock (key type) Garde)	-	10000	-
8.6.1(Lock (key type)classification)	-	10000	-
8.6.1(Lock (key type)construction)	-	10000	-
8.6.1(Lock(key type) leaver thickness)	-	10000	-
8.6.1(Lock (key type)Material)	-	10000	-
8.6.1(Lock (key type)corrosion protection materail)	-	10000	-
8.6.1(Lock(key type) -Endurance test)	-	10000	-
8.6.1(Lock(key type)-Bolt forcing test)	-	10000	-
8.6.1(Lock(key type)-salt spray solution test)	-	10000	-
8.6.1(Lock(key type)-key strength test)	-	10000	-
8.6.1(Lock(key type) -Marking)	-	10000	-
8.6.1(Lock(Key type) -Key Marking)	-	10000	-
8.6.1(Mechanical combination lock -Classification)	-	10000	-
8.6.1(Mechanical combination lock -Construction)	-	10000	-
8.6.1(Mechanical combination lock -Metallic parts)	-	10000	-
8.6.1(Mechanical combination lock -Corrosion Prot)	-	10000	-
8.6.1(Mechanical combination lock -Operation test)	-	10000	-
8.6.1(Mechanical cmbination lock -Manipulation)	-	10000	-
8.6.1(Mechanical combination lock -Punching attack)	-	10000	-
8.6.1(Mechanical combination lock -Endurance test)	-	10000	-
8.6.1(Mechanical combination lock-Salt spary test)	-	10000	-
8.6.1(Mechanical combination lock-Strength test)	-	10000	-
8.6.1(Mechanical combination lock-Aging-stress Dist)	-	10000	-
8.6.1(Mechanical combination lock-Moisture Absorp)	-	10000	-
8.6.1(Mechanical combination lock-Vibration test)	-	10000	-
8.6.1(Mechanical combination lock-Marking)	-	10000	-
8.6.1(Any other lock)	-	10000	-
8.6.4(Lock Bolt engagement)	-	10000	-
8.6.5(Additional provision- retrofitting time lock)	-	10000	-
8.7(Automatic re-locking device)	-	10000	-
8.8(Cable hole size)	-	10000	-
9(Internal fixture)	-	10000	-
10(Painting)	-	10000	-
10.1(Cross hatch test)	-	10000	-
11.1(Marking of safe)	-	10000	-
12(Burglary attack)	-	99999.97	-
12(Fire Resistance)	-	150000	-
4(Classification)	-	100000	-
5.1(Dimensions)	-	10000	-
5.2(Sizes)	-	10000	-
5.2(Table-2)(Inside dimensions)	-	10000	-
5.2(Table-2)(Tolerance on inside dimensions)	-	10000	-
5.2(Table-2)(Internal volume)	-	10000	-
5.2(Table-2)(Tolerance on interanal volume)	-	10000	-
5.2(Table-2)(Minumum Weight)	-	10000	-
5.2(Table-2)(Thickness of Plates (outer bodys& Door))	-	10000	-
5.2(Table-2)(Thickness of Door slab)	-	10000	-
5.2(Table-2)(Thickness of door overbolt work)	-	10000	-
5.2(Table-2)(Number of lock on the door)	-	10000	-
5.2(Table-2)(Any other type of lock)	-	10000	-
5.2(Table-2)(Number of bolt on hinge side)	-	10000	-
5.2(Table-2)(Number of bolt on opposite hinge)	-	10000	-
5.2(Table-2)(No.of bolt at the top)	-	10000	-
5.2(Table-2)(No.of bolt at the bottom)	-	10000	-
5.2(Table-2)(Size of each bolt (area of bolt section))	-	10000	-
5.2(Table-2)(Depth engagement of bolt)	-	10000	-
6(Material declaration)	-	10000	-
7(Desigantion-Delaration)	-	10000	-
8.1(Body (Construction & workmanship))	-	10000	-
8.2(Door (Gap))	-	10000	-
8.4.1(Hinges)	-	10000	-
8.4.2(Bolts)	-	10000	-
8.5(Handle)	-	10000	-
8.6.1(Lock (key type) Garde)	-	10000	-
8.6.1(Lock (key type)classification)	-	10000	-
8.6.1(Lock (key type)construction)	-	10000	-
8.6.1(Lock(key type) leaver thickness)	-	10000	-
8.6.1(Lock (key type)Material)	-	10000	-
8.6.1(Lock (key type)corrosion protection materail)	-	10000	-
8.6.1(Lock(key type) -Endurance test)	-	10000	-
8.6.1(Lock(key type)-Bolt forcing test)	-	10000	-
8.6.1(Lock(key type)-salt spray solution test)	-	10000	-
8.6.1(Lock(key type)-key strength test)	-	10000	-
8.6.1(Lock(key type) -Marking)	-	10000	-
8.6.1(Lock(Key type) -Key Marking)	-	10000	-
8.6.1(Mechanical combination lock -Classification)	-	10000	-
8.6.1(Mechanical combination lock -Construction)	-	10000	-
8.6.1(Mechanical combination lock -Metallic parts)	-	10000	-
8.6.1(Mechanical combination lock -Corrosion Prot)	-	10000	-
8.6.1(Mechanical combination lock -Operation test)	-	10000	-
8.6.1(Mechanical cmbination lock -Manipulation)	-	10000	-
8.6.1(Mechanical combination lock -Punching attack)	-	10000	-
8.6.1(Mechanical combination lock -Endurance test)	-	10000	-
8.6.1(Mechanical combination lock-Salt spary test)	-	10000	-
8.6.1(Mechanical combination lock-Strength test)	-	10000	-
8.6.1(Mechanical combination lock-Aging-stress Dist)	-	10000	-
8.6.1(Mechanical combination lock-Moisture Absorp)	-	10000	-
8.6.1(Mechanical combination lock-Vibration test)	-	10000	-
8.6.1(Mechanical combination lock-Marking)	-	10000	-
8.6.1(Any other lock)	-	10000	-
8.6.4(Lock Bolt engagement)	-	10000	-
8.6.5(Additional provision- retrofitting time lock)	-	10000	-
8.7(Automatic re-locking device)	-	10000	-
8.8(Cable hole size)	-	10000	-
9(Internal fixture)	-	10000	-
10(Painting)	-	10000	-
10.1(Cross hatch test)	-	10000	-
11.1(Marking of safe)	-	10000	-
12(Burglary attack)	-	100000	-
12(Fire Resistance)	-	150000	-

14 Nov, 2027

-
Included w.e.f. 28.03.2025

2469

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 17541 (2021)

Modular panel for security of premises specification

546000 View breakup
-

Clause No.	Exclusion	Remark
Clause-5(Dimensions)	-	-
Clause-6(Materials)	-	-
Clause-8(Construction and General Requirements)	-	-
Clause-9(Fittings)	-	-
Clause-10(Finish)	-	-
Clause-10.1(Cross Hatch Test)	-	-
Clause-11.2, 1(Full length panel (Continuous design panel))	-	-
Clause-11.2, 2(Assemble panel/Segmented panel)	-	-
Clause-12(Marking)	-	-
Clause-5(Dimensions)	-	-
Clause-6(Materials)	-	-
Clause-8(Construction and General Requirements)	-	-
Clause-9(Fittings)	-	-
Clause-10(Finish)	-	-
Clause-10.1(Cross Hatch Test)	-	-
Clause-11.2, 1(Full length panel (Continuous design panel))	-	-
Clause-11.2, 2(Assemble panel/Segmented panel)	-	-
Clause-12(Marking)	-	-

08 Feb, 2027

-
Included w.e.f. 01.04.2025

2470

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 550 : Part 1 (2022)

Safes: Part 1 specification Fifth Revision

380000 View breakup
-

Clause No.	Exclusion	Remark
4(Classification)	-	-
5.1(Dimensions)	-	-
5.2(Sizes)	-	-
5.2(Table-2)(Inside dimensions)	-	-
5.2(Table-2)(Tolerance on inside dimensions)	-	-
5.2(Table-2)(Internal volume)	-	-
5.2(Table-2)(Tolerance on interanal volume)	-	-
5.2(Table-2)(Minumum Weight)	-	-
5.2(Table-2)(Thickness of Plates (outer bodys& Door))	-	-
5.2(Table-2)(Thickness of Door slab)	-	-
5.2(Table-2)(Thickness of door overbolt work)	-	-
5.2(Table-2)(Number of lock on the door)	-	-
5.2(Table-2)(Any other type of lock)	-	-
5.2(Table-2)(Number of bolt on hinge side)	-	-
5.2(Table-2)(Number of bolt on opposite hinge)	-	-
5.2(Table-2)(No.of bolt at the top)	-	-
5.2(Table-2)(No.of bolt at the bottom)	-	-
5.2(Table-2)(Size of each bolt (area of bolt section))	-	-
5.2(Table-2)(Depth engagement of bolt)	-	-
6(Material declaration)	-	-
7(Desigantion-Delaration)	-	-
8.1(Body (Construction & workmanship))	-	-
8.2(Door (Gap))	-	-
8.4.1(Hinges)	-	-
8.4.2(Bolts)	-	-
8.5(Handle)	-	-
8.6.1(Lock (key type) Garde)	-	-
8.6.1(Lock (key type)classification)	-	-
8.6.1(Lock (key type)construction)	-	-
8.6.1(Lock(key type) leaver thickness)	-	-
8.6.1(Lock (key type)Material)	-	-
8.6.1(Lock (key type)corrosion protection materail)	-	-
8.6.1(Lock(key type) -Endurance test)	-	-
8.6.1(Lock(key type)-Bolt forcing test)	-	-
8.6.1(Lock(key type)-salt spray solution test)	-	-
8.6.1(Lock(key type)-key strength test)	-	-
8.6.1(Lock(key type) -Marking)	-	-
8.6.1(Lock(Key type) -Key Marking)	-	-
8.6.1(Mechanical combination lock -Classification)	-	-
8.6.1(Mechanical combination lock -Construction)	-	-
8.6.1(Mechanical combination lock -Metallic parts)	-	-
8.6.1(Mechanical combination lock -Corrosion Prot)	-	-
8.6.1(Mechanical combination lock -Operation test)	-	-
8.6.1(Mechanical cmbination lock -Manipulation)	-	-
8.6.1(Mechanical combination lock -Punching attack)	-	-
8.6.1(Mechanical combination lock -Endurance test)	-	-
8.6.1(Mechanical combination lock-Salt spary test)	-	-
8.6.1(Mechanical combination lock-Strength test)	-	-
8.6.1(Mechanical combination lock-Aging-stress Dist)	-	-
8.6.1(Mechanical combination lock-Moisture Absorp)	-	-
8.6.1(Mechanical combination lock-Vibration test)	-	-
8.6.1(Mechanical combination lock-Marking)	-	-
8.6.1(Any other lock)	-	-
8.6.4(Lock Bolt engagement)	-	-
8.6.5(Additional provision- retrofitting time lock)	-	-
8.7(Automatic re-locking device)	-	-
8.8(Cable hole size)	-	-
9(Internal fixture)	-	-
10(Painting)	-	-
10.1(Cross hatch test)	-	-
11.1(Marking of safe)	-	-
12(Burglary attack)	-	-
12(Fire Resistance)	-	-
4(Classification)	-	-
5.1(Dimensions)	-	-
5.2(Sizes)	-	-
5.2(Table-2)(Inside dimensions)	-	-
5.2(Table-2)(Tolerance on inside dimensions)	-	-
5.2(Table-2)(Internal volume)	-	-
5.2(Table-2)(Tolerance on interanal volume)	-	-
5.2(Table-2)(Minumum Weight)	-	-
5.2(Table-2)(Thickness of Plates (outer bodys& Door))	-	-
5.2(Table-2)(Thickness of Door slab)	-	-
5.2(Table-2)(Thickness of door overbolt work)	-	-
5.2(Table-2)(Number of lock on the door)	-	-
5.2(Table-2)(Any other type of lock)	-	-
5.2(Table-2)(Number of bolt on hinge side)	-	-
5.2(Table-2)(Number of bolt on opposite hinge)	-	-
5.2(Table-2)(No.of bolt at the top)	-	-
5.2(Table-2)(No.of bolt at the bottom)	-	-
5.2(Table-2)(Size of each bolt (area of bolt section))	-	-
5.2(Table-2)(Depth engagement of bolt)	-	-
6(Material declaration)	-	-
7(Desigantion-Delaration)	-	-
8.1(Body (Construction & workmanship))	-	-
8.2(Door (Gap))	-	-
8.4.1(Hinges)	-	-
8.4.2(Bolts)	-	-
8.5(Handle)	-	-
8.6.1(Lock (key type) Garde)	-	-
8.6.1(Lock (key type)classification)	-	-
8.6.1(Lock (key type)construction)	-	-
8.6.1(Lock(key type) leaver thickness)	-	-
8.6.1(Lock (key type)Material)	-	-
8.6.1(Lock (key type)corrosion protection materail)	-	-
8.6.1(Lock(key type) -Endurance test)	-	-
8.6.1(Lock(key type)-Bolt forcing test)	-	-
8.6.1(Lock(key type)-salt spray solution test)	-	-
8.6.1(Lock(key type)-key strength test)	-	-
8.6.1(Lock(key type) -Marking)	-	-
8.6.1(Lock(Key type) -Key Marking)	-	-
8.6.1(Mechanical combination lock -Classification)	-	-
8.6.1(Mechanical combination lock -Construction)	-	-
8.6.1(Mechanical combination lock -Metallic parts)	-	-
8.6.1(Mechanical combination lock -Corrosion Prot)	-	-
8.6.1(Mechanical combination lock -Operation test)	-	-
8.6.1(Mechanical cmbination lock -Manipulation)	-	-
8.6.1(Mechanical combination lock -Punching attack)	-	-
8.6.1(Mechanical combination lock -Endurance test)	-	-
8.6.1(Mechanical combination lock-Salt spary test)	-	-
8.6.1(Mechanical combination lock-Strength test)	-	-
8.6.1(Mechanical combination lock-Aging-stress Dist)	-	-
8.6.1(Mechanical combination lock-Moisture Absorp)	-	-
8.6.1(Mechanical combination lock-Vibration test)	-	-
8.6.1(Mechanical combination lock-Marking)	-	-
8.6.1(Any other lock)	-	-
8.6.4(Lock Bolt engagement)	-	-
8.6.5(Additional provision- retrofitting time lock)	-	-
8.7(Automatic re-locking device)	-	-
8.8(Cable hole size)	-	-
9(Internal fixture)	-	-
10(Painting)	-	-
10.1(Cross hatch test)	-	-
11.1(Marking of safe)	-	-
12(Burglary attack)	-	-
12(Fire Resistance)	-	-
4(Classification)	-	-
5.1(Dimensions)	-	-
5.2(Sizes)	-	-
5.2(Table-2)(Inside dimensions)	-	-
5.2(Table-2)(Tolerance on inside dimensions)	-	-
5.2(Table-2)(Internal volume)	-	-
5.2(Table-2)(Tolerance on interanal volume)	-	-
5.2(Table-2)(Minumum Weight)	-	-
5.2(Table-2)(Thickness of Plates (outer bodys& Door))	-	-
5.2(Table-2)(Thickness of Door slab)	-	-
5.2(Table-2)(Thickness of door overbolt work)	-	-
5.2(Table-2)(Number of lock on the door)	-	-
5.2(Table-2)(Any other type of lock)	-	-
5.2(Table-2)(Number of bolt on hinge side)	-	-
5.2(Table-2)(Number of bolt on opposite hinge)	-	-
5.2(Table-2)(No.of bolt at the top)	-	-
5.2(Table-2)(No.of bolt at the bottom)	-	-
5.2(Table-2)(Size of each bolt (area of bolt section))	-	-
5.2(Table-2)(Depth engagement of bolt)	-	-
6(Material declaration)	-	-
7(Desigantion-Delaration)	-	-
8.1(Body (Construction & workmanship))	-	-
8.2(Door (Gap))	-	-
8.4.1(Hinges)	-	-
8.4.2(Bolts)	-	-
8.5(Handle)	-	-
8.6.1(Lock (key type) Garde)	-	-
8.6.1(Lock (key type)classification)	-	-
8.6.1(Lock (key type)construction)	-	-
8.6.1(Lock(key type) leaver thickness)	-	-
8.6.1(Lock (key type)Material)	-	-
8.6.1(Lock (key type)corrosion protection materail)	-	-
8.6.1(Lock(key type) -Endurance test)	-	-
8.6.1(Lock(key type)-Bolt forcing test)	-	-
8.6.1(Lock(key type)-salt spray solution test)	-	-
8.6.1(Lock(key type)-key strength test)	-	-
8.6.1(Lock(key type) -Marking)	-	-
8.6.1(Lock(Key type) -Key Marking)	-	-
8.6.1(Mechanical combination lock -Classification)	-	-
8.6.1(Mechanical combination lock -Construction)	-	-
8.6.1(Mechanical combination lock -Metallic parts)	-	-
8.6.1(Mechanical combination lock -Corrosion Prot)	-	-
8.6.1(Mechanical combination lock -Operation test)	-	-
8.6.1(Mechanical cmbination lock -Manipulation)	-	-
8.6.1(Mechanical combination lock -Punching attack)	-	-
8.6.1(Mechanical combination lock -Endurance test)	-	-
8.6.1(Mechanical combination lock-Salt spary test)	-	-
8.6.1(Mechanical combination lock-Strength test)	-	-
8.6.1(Mechanical combination lock-Aging-stress Dist)	-	-
8.6.1(Mechanical combination lock-Moisture Absorp)	-	-
8.6.1(Mechanical combination lock-Vibration test)	-	-
8.6.1(Mechanical combination lock-Marking)	-	-
8.6.1(Any other lock)	-	-
8.6.4(Lock Bolt engagement)	-	-
8.6.5(Additional provision- retrofitting time lock)	-	-
8.7(Automatic re-locking device)	-	-
8.8(Cable hole size)	-	-
9(Internal fixture)	-	-
10(Painting)	-	-
10.1(Cross hatch test)	-	-
11.1(Marking of safe)	-	-
12(Burglary attack)	-	-
12(Fire Resistance)	-	-

08 Feb, 2027

-
Included w.e.f. 01.04.2025

2471

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 5244 (2020)

Safe Deposit Locker Cabinets — Specification ( Fourth Revision )

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1( Types )	-	1000	-
Cl. 6 (Fig-5)(Cabinet Size (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Finish)	-	1000	-
Table 1(Finish)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.2(Design and Manufacture)	-	1000	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl. 7.4(Design and Manufacture)	-	1000	-
Cl. 7.5(Design and Manufacture)	-	1000	-
Cl. 7.6(Design and Manufacture)	-	1000	-
Cl. 8(Workmanship)	-	1000	-
Cl. 8.2(Tolerance)	-	1000	-
Cl. 9.1(Testing)	-	1000	-
Cl. 9.2(Testing)	-	1000	-
Cl. 9.3(Cross Hatch Test)	-	1000	-
Cl. 10.1(Marking)	-	1000	-
Cl. 10.2(Marking)	-	1000	-
Cl. 10.3(Marking)	-	1000	-
Cl. 10.4(Marking on Keys)	-	1000	-
Cl. 11(Packing)	-	1000	-
Cl. 4.1( Types )	-	1000	-
Cl. 6 (Fig-5)(Cabinet Size (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Finish)	-	1000	-
Table 1(Finish)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.2(Design and Manufacture)	-	1000	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl. 7.4(Design and Manufacture)	-	1000	-
Cl. 7.5(Design and Manufacture)	-	1000	-
Cl. 7.6(Design and Manufacture)	-	1000	-
Cl. 8(Workmanship)	-	1000	-
Cl. 8.2(Tolerance)	-	1000	-
Cl. 9.1(Testing)	-	1000	-
Cl. 9.2(Testing)	-	1000	-
Cl. 9.3(Cross Hatch Test)	-	1000	-
Cl. 10.1(Marking)	-	1000	-
Cl. 10.2(Marking)	-	1000	-
Cl. 10.3(Marking)	-	1000	-
Cl. 10.4(Marking on Keys)	-	1000	-
Cl. 11(Packing)	-	1000	-
Cl. 4.1( Types )	-	1000	-
Cl. 6 (Fig-5)(Cabinet Size (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Thickness Min. (in mm))	-	1000	-
Table 1(Finish)	-	1000	-
Table 1(Finish)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl.6(Sizes (Minimum Inside Measurements of locker) Locker Size)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.1(Design and Manufacture)	-	1000	-
Cl. 7.2(Design and Manufacture)	-	1000	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl. 7.3(Design and Manufacture)	-	1000	-
Cl. 7.4(Design and Manufacture)	-	1000	-
Cl. 7.5(Design and Manufacture)	-	1000	-
Cl. 7.6(Design and Manufacture)	-	1000	-
Cl. 8(Workmanship)	-	1000	-
Cl. 8.2(Tolerance)	-	1000	-
Cl. 9.1(Testing)	-	1000	-
Cl. 9.2(Testing)	-	1000	-
Cl. 9.3(Cross Hatch Test)	-	1000	-
Cl. 10.1(Marking)	-	1000	-
Cl. 10.2(Marking)	-	1000	-
Cl. 10.3(Marking)	-	1000	-
Cl. 10.4(Marking on Keys)	-	1000	-
Cl. 11(Packing)	-	1000	-

14 Nov, 2027

-
Included w.e.f. 28.03.2025

2472

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 15558 (2005)

Mini domestic water heater for use with LPG - Specification

9700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
17(Combustion)	-	800	-
6.1(Connections)	-	200	-
6.2(Connections)	-	200	-
6.3(Connections)	-	200	-
6.4(Connections)	-	200	-
6.5(Connections)	-	200	-
6.6(Gas Inlet Connections)	-	200	-
6.6(Gas Inlet Connections)	-	200	-
6.6(Gas Inlet Connections)	-	200	-
6.6(Gas Inlet Connections)	-	200	-
6.6(Gas Inlet Connections)	-	200	-
6.6(Gas Inlet Connections)	-	200	-
24(Fire Hazard And Limiting Temperature )	-	500	-
24(Fire Hazard And Limiting Temperature)	-	500	-
24(Fire Hazard And Limiting Temperature)	-	500	-
24(Fire Hazard And Limiting Temperature)	-	500	-
9(Flame Failure Device)	-	400	-
20(Flame Stability)	-	500	-
7(Flame Visibility)	-	300	-
22(Flash Back)	-	400	-
18(Gas Consumption)	-	800	-
14(Gas Soundness)	-	500	-
8(Gas Taps)	-	300	-
19.1(Ignition and flame travel)	-	500	-
19.2(Ignition and flame travel)	-	500	-
19.3(Ignition and flame travel)	-	500	-
10(Ignition Device)	-	400	-
5.1(Materials)	-	200	-
5.2(Materials)	-	200	-
5.3(Materials)	-	200	-
5.4(Materials)	-	200	-
5.5(Materials)	-	200	-
21(Noise Control)	-	400	-
11(Protection Against Accidental Overheating)	-	400	-
23(Resistance to Draught)	-	400	-
16(Thermal Efficiency)	-	800	-
16(Thermal Efficiency)	-	800	-
25(Time For Temperature Rise)	-	500	-
4.1.1(Construction)	-	200	-
4.1.2(Construction)	-	200	-
4.1.3(Construction)	-	200	-
4.1.4(Construction)	-	200	-
4.1.5(Construction)	-	200	-
4.1.6(Construction)	-	200	-
4.1.7(Construction)	-	200	-
4.1.8(Construction)	-	200	-
4.1.9(Construction)	-	200	-
4.1.10(Construction)	-	200	-
4.1.11(Construction)	-	400	-
4.1.12(Construction)	-	200	-
26(Hot Water Output Test)	-	800	-
27(Marking)	-	200	-
12(Water Rate Adjuster)	-	500	-
15(Water Soundness)	-	500	-

26 Sep, 2027

-
-

2473

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

8141226

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	500	-
Cl.6 (Classification)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7(Marking and Instructions)	-	500	-
Cl.7(Marking and Instructions)	-	500	-
Cl.7(Marking and Instructions)	-	500	-
Cl.7.3(Marking and Instructions)	-	500	-
Cl.7.3(Marking and Instructions)	-	500	-
Cl.7.3(Marking and Instructions)	-	500	-
Cl.7.4(Marking and Instructions)	-	500	-
Cl.7.5(Marking and Instructions)	-	500	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	500	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	500	-
Cl.7.14(Marking and Instructions)	-	500	-
Cl.7.14(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.101(Marking and Instructions)	-	500	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	500	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11 & IS:302-1:2008(Heating)	-	500	-
Cl.11.8(Heating)	-	500	-
Cl.11.8(Heating)	-	500	-
Cl.11.8(Heating)	-	500	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	500	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	500	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	500	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	500	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	500	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	500	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	500	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	500	-
Cl.18 (Endurance. )	-	0	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	500	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	500	-
Cl.19.101(Abnormal Operation.)	-	500	-
Cl.19.102(Abnormal Operation.)	-	500	-
Cl.19.103(Abnormal Operation.)	-	500	-
Cl.19.104(Abnormal Operation.)	-	500	-
Cl.19.105(Abnormal Operation.)	-	500	-
Cl.19.106(Abnormal Operation.)	-	500	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	500	-
Cl.19.107(Abnormal Operation.)	-	500	-
Cl.19.108(Abnormal Operation.)	-	500	-
Cl.19.109(Abnormal Operation.)	-	500	-
Cl.19.110(Abnormal Operation.)	-	500	-
Cl.19.111(Abnormal Operation.)	-	500	-
Cl.19.112(Abnormal Operation.)	-	500	-
Cl.19.113(Abnormal Operation.)	-	500	-
Cl.19.114(Abnormal Operation.)	-	500	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	500	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	500	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	500	-
Cl.21.101 (Mechanical Strength.)	-	500	-
Cl.21.102(Mechanical Strength.)	-	500	-
Cl.21.103(Mechanical Strength.)	-	500	-
Cl.22.1 of IS 302-1:2008(Construction)	-	500	-
Cl.22.5 of IS 302-1:2008(Construction)	-	500	-
Cl.22.6 of IS 302-1:2008(Construction)	-	500	-
Cl.22.7 of IS 302-1:2008(Construction)	-	500	-
Cl.22.8 of IS 302-1:2008(Construction)	-	500	-
Cl.22.9 of IS 302-1:2008(Construction)	-	500	-
Cl.22.11(Construction)	-	500	-
Cl.22.12 of IS 302-1:2008(Construction)	-	500	-
Cl.22.13 of IS 302-1:2008(Construction)	-	500	-
Cl.22.14 of IS 302-1:2008(Construction)	-	500	-
Cl.22.15 of IS 302-1:2008(Construction)	-	500	-
Cl.22.18 of IS 302-1:2008(Construction)	-	500	-
Cl.22.20 of IS 302-1:2008(Construction)	-	500	-
Cl.22.21 of IS 302-1:2008(Construction)	-	500	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	500	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	500	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	500	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	500	-
C.23.7 of 302-1:2008(Internal Wiring )	-	500	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	500	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	500	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	500	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	500	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	500	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	500	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	500	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	500	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	500	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	500	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	500	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	500	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	500	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	500	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	500	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	500	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	500	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	500	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	500	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	500	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	500	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	500	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	500	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	500	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	500	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	500	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	500	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	500	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	500	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	500	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	500	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	500	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	500	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	500	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	500	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	500	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	500	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	500	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	500	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	500	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	500	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	500	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	500	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	500	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	500	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	500	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	500	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	500	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	500	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	500	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	500	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	500	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	500	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	500	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	500	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	500	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	500	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	500	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	500	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	500	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	500	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	500	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	500	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	500	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	500	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	500	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	500	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	500	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	500	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	500	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	500	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	500	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	500	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	500	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	500	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	500	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	500	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	500	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	500	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	500	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	500	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	500	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1 of 302-1:2008(Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
Cl.24.1.3 (Component)	-	0	-
C.24.1.4(Component)	-	0	-
C.24.2 of 302-1:2008(Component)	-	0	-
Cl.24.10(Component)	-	0	-
Cl.24 of IS:302-2-30:2007(Component)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Injected currents)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-

04 Jul, 2027

-
Included w.e.f.17.03.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC) Cl 24 (Components)

2474

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1364 : Part 1 (2023)

Hexagon head bolts, screws, and nuts of property grades A and B: Part 1 Hexagon head bolts (Size range M1.6 to M64) (sixth revision)

M 1.6 -M 64

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Dimensions)	-	25000	-
Cl-5, Table-7(General requirements)	-	25000	-
Cl-5, Table-7(Thread-Tolerance class)	-	25000	-
Cl-5, Table-7(Mechanical properties- Steel)	-	25000	-
Cl-5, Table-7(Mechanical properties-Stainless steel)	-	25000	-
Cl-5, Table-7(Tolerances-Product grade)	-	25000	-
Cl-5, Table-7(Surface condition -Electroplated coatings)	-	25000	-
Cl-5, Table-7(Surface condition- Non-electrolytically applied zinc flake)	-	1000	-
Cl-5, Table-7(Surface condition - Hot dip galvanized coatings)	-	1000	-
Cl-5, Table-7(Surface integrity- Limits for surface discontinuities)	-	1000	-
Cl-6(Marking)	-	25000	-

31 Dec, 2026

-
-

2475

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1364 : Part 2 (2018)

Hexagon head bolts, screws and nuts of product grades A and B: Part 2 hexagon head screws (Size Range M 1.6 To M 64) (Fifth Revision)

M 1.6- M 64

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(dimensions)	-	25000	-
4(Material)	-	25000	-
4(Thread requirements)	-	25000	-
5(Designation)	-	25000	-
9.1 to 9.5, 9.7(Tensile Test)	-	25000	-
9.8(Head Soundness Test)	-	25000	-
9.13(Torsion Test)	-	25000	-
9.14(Impact Test)	-	25000	-
9.9(Hardness Test)	-	25000	-
9.1(Decarburization Test)	-	25000	-
9.11(Carburization test)	-	25000	-
9.12(Re tempering test)	-	25000	-
9.15(Surface discontinuity test)	-	25000	-
7.2.2(Tensile Strength)	-	25000	-
7.2.3(Stress at 0.2% permanent strain)	-	25000	-
7.2.4(Elongation after fracture)	-	25000	-
7.2.5(Breaking Torque Test)	-	1500	-
7.2.6(Strength under wedge loading)	-	25000	-
7.2.7(Hardness)	-	25000	-

31 Dec, 2026

-
-

2476

CSIR-Central Building Research Institute, Roorkee

9184204

IS 550 : Part 1 (2014)

Safes: Part 1 specification (Fifth Revision)

450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4 Table 1(CLASSIFICATIONS)	-	450000	450000 + GST for two hours
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	450000	450000 + GST for two hours
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	450000	450000 + GST for two hours
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	450000	450000 + GST for two hours
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	450000	450000 + GST for two hours
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	450000	450000 + GST for two hours
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	450000	450000 + GST for two hours
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	450000	450000 + GST for two hours
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	450000	450000 + GST for two hours
Cl. 5 Table 10(DIMENSIONS AND SIZES)	-	450000	450000 + GST for two hours
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	450000	450000 + GST for two hours
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	450000	450000 + GST for two hours
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	450000	450000 + GST for two hours
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	450000	450000 + GST for two hours
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	450000	450000 + GST for two hours
Cl. 5 Table 2(DIMENSIONS AND SIZES)	-	450000	450000 + GST for two hours
Cl. 6 Table 3(Material)	-	450000	450000 + GST for two hours
Cl. 7 (DESIGNATIONS)	-	450000	450000 + GST for two hours
Cl. 8.1(Body)	-	450000	450000 + GST for two hours
Cl. 8.3(Door)	-	450000	450000 + GST for two hours
Cl. 8.4.1(Hinges)	-	450000	450000 + GST for two hours
Cl. 8.4.2(Bolts)	-	450000	450000 + GST for two hours
Cl. 8.5 Table 3(Handles)	-	450000	450000 + GST for two hours
Cl. 8.6.1(Locks (Type))	-	450000	450000 + GST for two hours
Cl. 8.6.1.1(Locks (Type))	-	450000	450000 + GST for two hours
Cl. 8.6.2(Locks (Levers))	-	450000	450000 + GST for two hours
Cl. 8.6.3(Tests for locks)	-	450000	450000 + GST for two hours
Cl. 8.6.4(Keys)	-	450000	450000 + GST for two hours
Cl. 8.6.5(Unpickability)	-	450000	450000 + GST for two hours
Cl. 8.6.6(Non-interchangeability)	-	450000	450000 + GST for two hours
Cl. 8.7(Automatic Relocking Device)	-	450000	450000 + GST for two hours
Cl. 9(INTERNAL FIXTURES)	-	450000	450000 + GST for two hours
Cl. 10(Painting)	-	450000	450000 + GST for two hours
Cl. 10(Painting)	-	450000	450000 + GST for two hours
Cl. 11.1(Marking of Safes)	-	450000	450000 + GST for two hours
Cl. 11.2( Marking on Keys)	-	450000	450000 + GST for two hours
Cl. 11.3(BIS Certification Marking)	-	450000	450000 + GST for two hours

12 Mar, 2028

-
-

2477

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17265 (2022)

Textiles - 100 Percent polyester spun grey and white yarns - Specification (first revision)

55800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification (IS 17265))	-	1500	-
5(Designation and description (IS 17265))	-	7500	-
5.2.1(Microscopic and dissolution test (IS 667))	-	40000	-
5.2.1(Microscopic and dissolution test (IS 667))	-	40000	-
5.2.1(Melting Point (16481))	-	2500	-
6 & Table 3(Mean linear density(Count) (IS 1315))	-	2500	-
6 & Table 3(CV (IS 1315))	-	2500	-
6 & Table 3(CV (IS 1315))	-	2500	-
6 & Table 3(Twist per meter (IS 832 Part-1 & 2))	-	2500	-
6 & Table 3(CV (IS 832 Part-1 & 2))	-	2500	-
6 & Table 3(Single Yarn tenacity (RKM) (IS 1670))	-	2500	-
6 & Table 3(CV (IS 1670))	-	2500	-
6 & Table 3(Elongation (IS 1670))	-	2500	-
6 & Table 3(CV (IS 1670))	-	2500	-
6 & Table 3(Coungth Strength Product (CSP) (IS 1671))	-	2500	-
6 & Table 3(Yarn Hairiness index (IS 17265))	-	2500	-
6 & Table 3(Yarn Hairiness index (IS 17265))	-	2500	-
6 & Table 3(Whiteness Index of polyester spun yarn (IS17263))	-	2500	-
6 & Table 4(Moisture regain (IS 17265))	-	2000	-
6 & Table 4(Isophthalic acid (IPA) content (IS 16481))	-	2500	-
6 & Table 4(Isophthalic acid (IPA) content (IS 16481))	-	2500	-
6 & Table 4(Water soluble matter (IS 3456))	-	2500	-
6 & Table 4(Phosphorus content (IS 17265))	-	2500	-
6 & Table 4(Ultraviolet resistance (IS 13162 Part2))	-	40000	-
6 & Table 4(Anti-microbial activity value (IS/ISO 20743))	-	35000	-
6 & Table 4(Wettability of woven or knitted fabrics (about 150 gsm) made from the yarn (IS 2349))	-	2500	-
6 & Table 4(Wicking characteristic of woven or knitted fabrics (about 150 gsm) made from the yarn (IS 17265))	-	2500	-
6.2.1(tenacity of multifold yarn including double yarn (IS 17265))	-	2500	-
6.2.2(Resultant count of yarn and CV percentage (IS 1315))	-	2500	-
6.3(Freedom from Defects (IS 17265))	-	3500	-
6.4 & table 5(Yarn Unevenness and Yarn Imperfections)	-	2500	-
6.4 & table 5(U Percent)	-	2500	-
6.4 & table 5(CV)	-	2500	-
6.7 & Table 7(Colour Fastness Rating To Washing Change in colour (IS/ISO 105-C10))	-	7500	-
6.7 & Table 7(Colour Fastness Rating To Washing Staining (IS/ISO 105-C10))	-	7500	-
6.7 & Table 7(Colour Fastness Rating To Rubbing Dry (IS/ISO 105-X12))	-	7500	-
6.7 & Table 7(Colour Fastness Rating To Rubbing Wet (IS/ISO 105-X12))	-	7500	-
6.7 & Table 7(Colour Fastness Rating To Perspiration (acidic and alkaline) Change in colour (IS/ISO 105-E04))	-	7500	-
6.7 & Table 7(Colour Fastness Rating To Perspiration (acidic and alkaline) Staining (IS/ISO 105-E04))	-	7500	-
6.8 & Table 8(Free and releasable formaldehyde (IS 14563 (Part 1) and IS 14563 (Part 2)))	-	9500	-
6.8 & Table 8(Mercury (IS 15651))	-	0	-
6.8 & Table 8(Chromium III (IS 15651))	-	0	-
6.8 & Table 8(Chromium VI (IS 15651))	-	0	-
6.8 & Table 8(Lead (IS 15651))	-	0	-
6.8 & Table 8(Cadmium)	-	0	-
6.8 & Table 8(Cadmium)	-	0	-
6.8 & Table 8(Copper (IS 15651))	-	0	-
6.8 & Table 8(Antimony (IS 15651))	-	0	-
6.8 & Table 8(Pentachlorophenol (IS 15651))	-	0	-
6.8 & Table 8(Pesticides (sum parameter) (IS 15651))	-	0	-
6.8 & Table 8(Banned pesticides (IS 15651))	-	0	-
6.8 & Table 8(Banned azo colourants (arylamines) (IS 15570))	-	0	-
8.1(Marking (IS 17265))	-	0	-
6.1 Table 3(White index of poyster spun yarrn)	-	2500	-
6.1 Table 4(Moisture Regain , %)	-	2000	-
6.1 Table 4(Water soluble matter %)	-	2500	-
6.1 Table 4(Phosphorus content %)	-	2500	-
6.1 Table 7(Colour Fastness to light)	-	7500	-
6.1 Table 7(Colour Fastness to washing , test 2)	-	7500	-
6.1 Table 7(Colour Fastness to perspiration)	-	7500	-
6.1 Table 7(Colour Fastness to Rubbing)	-	7500	-
6.2 Table 4(Moisture Regain , %)	-	2000	-
6.2 Table 4(Water soluble matter %)	-	2500	-
6.2 Table 4(Colour difference with ref to std yarn measured asDE)	-	2500	-
6.1 Table 3(Finish Oil Pickup, %)	-	2500	-
6.1 Table 4(Moisture Regain , %)	-	2000	-
6.1 Table 4(Phosporus content , %)	-	2500	-
6.1 Table 3(Mean Linear Density (Count),Ne)	-	2500	-
6.1 Table 3(Twist per metre,Average)	-	2500	-
6.1 Table 3 100 Percent Polyester Spun Grey and White Yarns -Specification(Single Yarn Tenacity (RKM),g/tex)	-	2500	-
6.1 Table 3(Elongation %)	-	2500	-
6.1 Table 3(Count Strength Product (CSP))	-	2500	-
6.1 Table 3(Yarn hairiness index)	-	2500	-
6.1 Table 5(Uneveness (U %))	-	10500	-

08 May, 2028

-
-

2478

Shiva Analyticals (India) Private Limited, Bengaluru

6121716

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

20000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Appearance)	-	200	-
5.4/Annex D/i(P,P-DDT)	-	180	-
5.4/Annex D/ii(Lindane)	-	180	-
5.4/Annex D/iv(b-Endosulfan)	-	180	-
5.4/Annex D/xvi(Dieldrin)	-	180	-
5.4/Annex D/xvi(Aldrin)	-	180	-
5.4/Annex D/i(O,P-DDT)	-	180	-
5.4/Annex D/iv(a-Endosulfan)	-	180	-
5.4/Annex D/iii(d-HCH)	-	180	-
5.4/Annex D/i(O,P-DDD)	-	180	-
5.4/Annex D/i(P,P-DDE)	-	180	-
5.4/Annex D/i(O,P-DDE)	-	180	-
5.4/Annex D/iii(a-HCH)	-	180	-
5.4/Annex D/iii(β- HCH)	-	180	-
5.4/Annex D/iv(Endosulfan sulfate)	-	180	-
5.4/Annex D/i(P,P-DDD)	-	180	-
5.4/Annex D/xii(Alachlor)	-	180	-
5.4/Annex D/vii(Chlorpyrifos)	-	180	-
5.4/Annex D/x(Butachlor)	-	180	-
5.4/Annex D/vi(Ethion)	-	180	-
5.4/Annex D/xiv(Methyl parathion)	-	180	-
5.4/Annex D/xv(Malathion)	-	180	-
5.4/Annex D/viii(Phorate)	-	180	-
5.4/Annex D/v(Monochrotophos)	-	180	-
5.4/Annex D/xiii(Atrazine)	-	180	-
5.4/Annex D/viii(Phorate sulphoxide)	-	180	-
5.4/Annex D/viii(Phorate sulfone)	-	180	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	180	-
5.4/Annex D/xxviii(Malaoxon)	-	180	-
5.4/Annex D/xi(Isoproturon)	-	180	-
5.4/Annex D/ix(2,4 –D)	-	180	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	200	-
Cl-5.3, Table-1 (ii)(Odour)	-	200	-
Cl-5.3, Table-1 (iii)(Taste)	-	200	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	200	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	200	-
Cl-5.3, Table-1 (vi)(pH)	-	200	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	200	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	200	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	200	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	200	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	200	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	200	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	200	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	200	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	200	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	200	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	200	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	200	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	200	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	200	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	200	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	200	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	200	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	200	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	200	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	550	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	415	-
Cl-5.2.2(Coliform)	-	415	-
Cl-5.2.3(Staphylococcus aureus)	-	470	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	415	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	415	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	415	-
Cl-5.2.7(Yeast and mould)	-	415	-
Cl-5.2.8(Salmonella)	-	415	-
Cl-5.2.9(Vibrio cholera)	-	415	-
Cl-5.1(General Requirements)	-	200	-
5.4 i)(Dieldrin)	-	180	-
5.4 i)(Aldrin)	-	180	-
5.4 i)(Malathion)	-	180	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	180	-
5.4 i)(Methyl Paraoxon)	-	180	-
5.4 i)(Methyl Parathion)	-	180	-
5.4 i)(Atrazine)	-	180	-
5.4 i)(Alachlor)	-	180	-
5.4 i)(Isoproturon)	-	180	-
5.4 i)(Butachlor)	-	180	-
5.4 i)(2,4-D)	-	180	-
5.4 i)(Phorate sulphone)	-	180	-
5.4 i)(Phorate sulphoxide)	-	180	-
5.4 i)(Phorate)	-	180	-
5.4 i)(Chlorpyrifos)	-	180	-
5.4 i)(Ethion)	-	180	-
5.4 i)(Monocrotophos)	-	180	-
5.4 i)(Endosulfan Sulphate)	-	180	-
5.4 i)(beta-Endosulfan)	-	180	-
5.4 i)(alpha-Endosulfan)	-	180	-
5.4 i)(Delta-HCH)	-	180	-
5.4 i)(beta-HCH)	-	180	-
5.4 i)(alpha-HCH)	-	180	-
5.4 i)(Gamma-HCH (Lindane))	-	180	-
5.4 i)(p,p DDD)	-	180	-
5.4 i)(o,p DDD)	-	180	-
5.4 i)(p,p DDE)	-	180	-
5.4, i)(o,p DDE)	-	180	-
5.4 i)(p,p DDT)	-	180	-
5.4 i)(o,p DDT)	-	180	-
Table 3, x)(Uranium)	-	200	-
Cl-5.3, Table-3 (x)(Uranium)	-	200	-
Cl-5.2.3(Faecal streptococci)	-	415	-
Cl-5.2.8(shigella)	-	415	-
Cl-5.2.9(V.parahaemolyticus)	-	415	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	415	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	200	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	200	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	200	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	200	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	200	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	200	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	200	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	200	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	200	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	200	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	200	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	200	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	200	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	200	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	200	-
Cl-5.4 (ii)(Total pesticide residue)	-	200	-
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	0.00	-
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	0.00	-
5.3(Appearance)	-	-	-
5.4/Annex D/i(P,P-DDT)	-	-	-
5.4/Annex D/ii(Lindane)	-	-	-
5.4/Annex D/iv(b-Endosulfan)	-	-	-
5.4/Annex D/xvi(Dieldrin)	-	-	-
5.4/Annex D/xvi(Aldrin)	-	-	-
5.4/Annex D/i(O,P-DDT)	-	-	-
5.4/Annex D/iv(a-Endosulfan)	-	-	-
5.4/Annex D/iii(d-HCH)	-	-	-
5.4/Annex D/i(O,P-DDD)	-	-	-
5.4/Annex D/i(P,P-DDE)	-	-	-
5.4/Annex D/i(O,P-DDE)	-	-	-
5.4/Annex D/iii(a-HCH)	-	-	-
5.4/Annex D/iii(β- HCH)	-	-	-
5.4/Annex D/iv(Endosulfan sulfate)	-	-	-
5.4/Annex D/i(P,P-DDD)	-	-	-
5.4/Annex D/xii(Alachlor)	-	-	-
5.4/Annex D/vii(Chlorpyrifos)	-	-	-
5.4/Annex D/x(Butachlor)	-	-	-
5.4/Annex D/vi(Ethion)	-	-	-
5.4/Annex D/xiv(Methyl parathion)	-	-	-
5.4/Annex D/xv(Malathion)	-	-	-
5.4/Annex D/viii(Phorate)	-	-	-
5.4/Annex D/v(Monochrotophos)	-	-	-
5.4/Annex D/xiii(Atrazine)	-	-	-
5.4/Annex D/viii(Phorate sulphoxide)	-	-	-
5.4/Annex D/viii(Phorate sulfone)	-	-	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	-	-
5.4/Annex D/xxviii(Malaoxon)	-	-	-
5.4/Annex D/xi(Isoproturon)	-	-	-
5.4/Annex D/ix(2,4 –D)	-	-	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	-	-
Cl-5.3, Table-1 (ii)(Odour)	-	-	-
Cl-5.3, Table-1 (iii)(Taste)	-	-	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	-	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	-	-
Cl-5.3, Table-1 (vi)(pH)	-	-	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	-	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	-	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	-	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	-	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	-	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	-	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	-	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	-	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	-	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	-	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	-	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	-	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	-	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	-	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	-	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	-	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	-	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	-	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	-	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	-	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	-	-
Cl-5.2.2(Coliform)	-	-	-
Cl-5.2.3(Staphylococcus aureus)	-	-	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	-	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	-	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	-	-
Cl-5.2.7(Yeast and mould)	-	-	-
Cl-5.2.8(Salmonella)	-	-	-
Cl-5.2.9(Vibrio cholera)	-	-	-
Cl-5.1(General Requirements)	-	-	-
5.4 i)(Dieldrin)	-	-	-
5.4 i)(Aldrin)	-	-	-
5.4 i)(Malathion)	-	-	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	-	-
5.4 i)(Methyl Paraoxon)	-	-	-
5.4 i)(Methyl Parathion)	-	-	-
5.4 i)(Atrazine)	-	-	-
5.4 i)(Alachlor)	-	-	-
5.4 i)(Isoproturon)	-	-	-
5.4 i)(Butachlor)	-	-	-
5.4 i)(2,4-D)	-	-	-
5.4 i)(Phorate sulphone)	-	-	-
5.4 i)(Phorate sulphoxide)	-	-	-
5.4 i)(Phorate)	-	-	-
5.4 i)(Chlorpyrifos)	-	-	-
5.4 i)(Ethion)	-	-	-
5.4 i)(Monocrotophos)	-	-	-
5.4 i)(Endosulfan Sulphate)	-	-	-
5.4 i)(beta-Endosulfan)	-	-	-
5.4 i)(alpha-Endosulfan)	-	-	-
5.4 i)(Delta-HCH)	-	-	-
5.4 i)(beta-HCH)	-	-	-
5.4 i)(alpha-HCH)	-	-	-
5.4 i)(Gamma-HCH (Lindane))	-	-	-
5.4 i)(p,p DDD)	-	-	-
5.4 i)(o,p DDD)	-	-	-
5.4 i)(p,p DDE)	-	-	-
5.4, i)(o,p DDE)	-	-	-
5.4 i)(p,p DDT)	-	-	-
5.4 i)(o,p DDT)	-	-	-
Table 3, x)(Uranium)	-	-	-
Cl-5.3, Table-3 (x)(Uranium)	-	-	-
Cl-5.2.3(Faecal streptococci)	-	-	-
Cl-5.2.8(shigella)	-	-	-
Cl-5.2.9(V.parahaemolyticus)	-	-	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	-	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	-	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	-	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	-	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	-	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	-	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	-	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	-	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	-	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	-	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	-	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	-	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	-	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	-	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	-	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	-	-
Cl-5.4 (ii)(Total pesticide residue)	-	-	-
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	-	-
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	-	-
5.3/Table 2/xiii(Suphate)	-	-	-

21 Apr, 2028

-
Included w.e.f.16.04.2025 Exclusion Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)) Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

2479

DELHI TEST HOUSE (50) KUNDLI SONIPAT

9127026

IS 17980 (2022)

Maximum Power Point Tracking Efficiency of Grid Connected Photovoltaic Inverters (First Revision)

520000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (a)(Static MPPT efficiency)	-	260000		-
Cl-4.1 (b)(Dynamic MPPT efficiency)	-	260000		-

23 Jun, 2028

-
Included w.e.f.07.03.2025

2480

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 17264 (2022)

Textiles - Polyester industrial yarn - Specification (first revision)

46500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation of Yarn (IS 17264))	-	7500	-
1(Microscopic and dissolution (IS 667))	-	40000	-
5.2.1 a(melting point)	-	2500	-
5.2.1 b(Staining Test (IS 667))	-	3500	-
5.2.2 & Table-1(Classification (IS 17264))	-	1500	-
5.2.2 & Table-1(Identification)	-	40000	-
6.3(Freedom from defects (IS 17264))	-	3500	-
6.1 & Table-3(Linear Density (IS 7703 Part-1))	-	2500	-
6.1 & Table-3(Tenacity (IS 7703 Part-2))	-	2500	-
6.1 & Table-3(Elongation (IS 7703 Part-2))	-	2500	-
6.1 & Table-3(Hot Air Shrinkage (IS 17264))	-	2500	-
6.2 & Table-4(Moisture regain (IS 17264))	-	2000	-
6.2 & Table-4(Isophthalic acid (IPA) content (IS 16481))	-	2500	-
6.2 & Table-4(Water soluble matter (IS 3456))	-	2500	-
6.2 & Table-4(Finish oil pick-up (IS 17264))	-	2500	-
6.2 & Table-4(Phosphorus content (IS 17264))	-	2500	-
6.2 & Table-4(Ultraviolet resistance (IS 13162 Part-2))	-	40000	-
6.2 & Table-4(Colour strength with reference to standard yarn (IS 17264))	-	2500	-
6.2 & Table-4(Colour difference with reference to standard yarn, measured as ΔE (IS 17264))	-	2500	-
6.4 & Table-5(Colour Fastness Rating to light (IS/ISO 105-B01))	-	7500	-
6.4 & Table-5(Colour Fastness Rating to Rubbing (IS/ISO 105-X12))	-	3500	-
8(Marking (IS 17264))	-	0	-
6.6 & Table-6(Free and releasable formaldehyde (IS 14563 Part-1 & 2))	-	9500	-
6.6 & Table-6(Mercury (IS 15651))	-	0	-
6.6 & Table-6(Chromium III (IS 15651))	-	0	-
6.6 & Table-6(Chromium VI (IS 15651))	-	0	-
6.6 & Table-6(Lead (IS 15651))	-	0	-
6.6 & Table-6(Cadmium (IS 15651))	-	0	-
6.6 & Table-6(Copper (IS 15651))	-	0	-
6.6 & Table-6(Antimony (IS 15651))	-	0	-
6.6 & Table-6(Pesticides (sum parameter) (IS 15651))	-	0	-
6.6 & Table-6(Banned pesticides (IS 15651))	-	0	-
6.6 & Table-6(Banned azo colourants (arylamines) (IS 15570))	-	0	-
5.2(Identification and Description, Annex J of IS 16481 & IS 667)	-	40000	-
6.4- Table -5, Sl no. 2 (a)(Rubbing, Dry IS/ISO 105-X12)	-	3500	-
6.4- Table -5, Sl no. 2 (b)(Rubbing, Wet IS/ISO 105-X13)	-	3500	-
6.5(Commercial mass)	-	2500	-
6.2 Table 4(Finish Oil Pickup)	-	2500	-
6.2 Table 4(Phosporus content)	-	2500	-
6.2 Table 4(Colour strength with reference to std yarn %)	-	2500	-
6.4 Table 5(Colour Fastness to Rubbing)	-	3500	-
6.1 Table 3(Linear Density, Denier (dtex))	-	2500	-
6.1 Table 3(Tenacity,gpd (cN/dtex))	-	2500	-
6.1 Table 3(Elongation %)	-	2500	-
6.1 Table 3(Hot Air Shrinkage %)	-	2500	-
6.6 & Table-6(Pentachlorophenol (IS 15651))	-	0	-

08 May, 2028

-
-

2481

BIS, Western Regional Laboratory (WRL)

None

IS 13098 (2024)

AUTOMOTIVE VEHICLES TUBES FOR PNEUMATIC TYRES â SPECIFICATION (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (MARKING)	-
Cl 5 (AIR TIGHTNESS)	-
Cl 4.1.4 (Accelerated Ageing)	-
Cl 4.1.3 (Set After Ageing)	-
Cl 4.1.2 (Strength of Splice)	-
Cl 4.1.1 (Elongation)	-
Cl 3.3.1 (Thickness Uniformity)	-
Cl 3.3 (Fit)	-
Cl 3.2 (Classification)	-
Cl 3.1 (Materials)	-

-
-

2482

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 15961 (2012)

Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain)

All

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(UTM)	-	9500	-
Cl 9 & Table 2(Workmanship)	-	9500	-
Cl 10(Coating Adhesion )	-	9500	-
Cl 11(Workmanship)	-	9500	-
Cl 12(Weight)	-	9500	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	9500	-
Cl 8(UTM)	-	9500	-
Cl 9 & Table 2(Workmanship)	-	9500	-
Cl 10(Coating Adhesion )	-	9500	-
Cl 11(Workmanship)	-	9500	-
Cl 12(Weight)	-	9500	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	9500	-
Cl 8(UTM)	-	9500	-
Cl 9 & Table 2(Workmanship)	-	9500	-
Cl 10(Coating Adhesion )	-	9500	-
Cl 11(Workmanship)	-	9500	-
Cl 12(Weight)	-	9500	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	9500	-
Cl. 13.7(Deviation from Flatness (Steepness))	-	9500	-
Cl. 13.6(Deviation from Squareness (Out of Square))	-	9500	-
Cl. 13.5(Camber)	-	9500	-
Cl. 13.4(Thickness)	-	9500	-
Cl. 13.3(Width)	-	9500	-
4, 5(CARBON)	-	9500	-
4, 5(SULPHUR)	-	9500	-
4, 5(PHOSPHURS)	-	9500	-
4.5(MANGANESE)	-	9500	-
4, 5(NITROGEN)	-	9500	-
4, 5(SILICON)	-	9500	-
4, 5(ALUMINIUM)	-	9500	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	9500	-
Cl 12(Weight)	-	9500	-
Cl 11(Workmanship)	-	9500	-
Cl 10(Coating Adhesion )	-	9500	-
Cl 9 & Table 2(Workmanship)	-	9500	-
Cl 8(UTM)	-	9500	-
Cl 8(UTM)	-	9500	-
Cl 9 & Table 2(Workmanship)	-	9500	-
Cl 10(Coating Adhesion)	-	9500	-
Cl 11(Workmanship)	-	9500	-
Cl 12(Weight)	-	9500	-
Cl 13(Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-	9500	-
Clause 3.5(IS 15961)	-	9500	-
Clause 8, Table 1(IS 1608 Part 1)	-	9500	-
Clause 8, Table 1(IS 1608 Part 1)	-	9500	-
Clause 8, Table 1(IS 1608 Part 1)	-	9500	-
Clause 9(IS 15961)	-	9500	-
Clause 9(IS 15961)	-	9500	-
Clause 9(IS 15961)	-	9500	-
Clause 9.7(IS 15961)	-	9500	-
Clause 11(IS 15961)	-	9500	-
Clause 12(IS 15961)	-	9500	-
Clause 13.1(IS 15961)	-	9500	-
Clause 13.2(IS 15961)	-	9500	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	9500	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	9500	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	9500	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	9500	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	9500	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	9500	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	9500	-
Clause 7.1(Any Instrumental Method/Chemical Method)	-	9500	-
Clause 7.1(By Calculation)	-	9500	-
7.1(Chemical composition %, IS 513)	-	9500	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	9500	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	9500	-
10.0 (Table No.-3)(Coating adhesion test)	-	9500	-
11(Freedom from defects)	-	9500	-
12(Mass, kg)	-	9500	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	9500	-
7.1(Chemical composition %, IS 513)	-	9500	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	9500	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	9500	-
10.0 (Table No.-3)(Coating adhesion test)	-	9500	-
11(Freedom from defects)	-	9500	-
12(Mass, kg)	-	9500	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	9500	-
7.1(Chemical composition %, IS 513)	-	9500	-
8.0 (Table No.- 1)(Tensile Test MPa(T.S., Y.S. & El) - IS 1608)	-	9500	-
9.0 (Table No.- 2)(Coating test, g/m2)	-	9500	-
10.0 (Table No.-3)(Coating adhesion test)	-	9500	-
11(Freedom from defects)	-	9500	-
12(Mass, kg)	-	9500	-
13(Dimensions, Shape and Tolerances,mm-IS/ISO 16163)	-	9500	-
Clause 3.5(Surface Finish)	-	9500	-
Clause 8, Table 1(Tensile Strength)	-	9500	-
Clause 8, Table 1(Yield Strength)	-	9500	-
Clause 8, Table 1(Elongation)	-	9500	-
Clause 9(Coating Test (Triple Spot Test) (Total Both Surface))	-	9500	-
Clause 9(Coating Test (Triple Spot Test) (Total Both Surface))	-	9500	-
Clause 9(Coating Test (Single Spot Test) (Total Both Surface))	-	9500	-
Clause 9(Coating Test (Single Spot Test) (One Surface))	-	9500	-
Clause 9.7(Differential Coating)	-	9500	-
Clause 11(Freedom from Defect)	-	9500	-
Clause 12(Mass)	-	9500	-
Clause 13.1(Coil Internal Diameter)	-	9500	-
Clause 13.2(Length Tolerance)	-	9500	-
Clause 7.1(Chromium)	-	9500	-
Clause 7.1(Nickel)	-	9500	-
Clause 7.1(Niobium)	-	9500	-
Clause 7.1(Vanadium)	-	9500	-
Clause 7.1(Titanium)	-	9500	-
Clause 7.1(Molybdenum)	-	9500	-
Clause 7.1(Boron)	-	9500	-
Clause 7.1(Calcium)	-	9500	-
Clause 7.1(Chromium + Nickel + Niobium, Vanadium + Titanium + Molybdenum + Boron + Calcium)	-	9500	-

31 Dec, 2026

-
Included w.e.f.11.04.2025

2483

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

73000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	0	-
7(Marking and instructions)	-	2000	-
8.1.1(Protection against live parts in all positions)	-	2000	-
8.1.2(Protection against live parts in openings)	-	0	Testing charges included in Cl.8.1.1
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	Testing charges included in Cl.8.1.1
8.1.4(Protection against live parts against protective impedance)	-	0	Testing charges included in Cl.8.1.1
8.1.5(Live parts of built-in appliances)	-	0	Testing charges included in Cl.8.1.1
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	2000	-
10.2(Current input)	-	0	Testing charges included in Cl.10.1
11.1(General)	-	4000	-
11.2(General)	-	0	Testing charges included in Cl.11.1
11.3(Heating)	-	0	Testing charges included in Cl.11.1
11.4(Heating appliances)	-	0	Testing charges included in Cl.11.1
11.5(Motor-operated appliances)	-	0	Testing charges included in Cl.11.1
11.6(Combined appliances)	-	0	Testing charges included in Cl.11.1
11.7(Duration corresponding)	-	0	Testing charges included in Cl.11.1
11.8(Temperature rise)	-	0	Testing charges included in Cl.11.1
12(Charging of metal-ion batteries)	-	15000	if applicable
13(Leakage current and electric strength at operating temperature)	-	3000	-
13.2(Leakage current at operating temperature)	-	0	Testing charges included in Cl.13
13.3(Electric Strength at operating temperature)	-	0	Testing charges included in Cl.13
14(Transient Over Voltages)	-	2000	-
15.0(Moisture resistance)	-	4000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	Testing charges included in Cl.15
15.2(Spillage Test)	-	0	Testing charges included in Cl.15
15.3(Humidity Test)	-	0	Testing charges included in Cl.15
16.0(General)	-	0	Testing charges included in Cl.16
16(Leakage current and electric strength)	-	3000	-
16.2(Leakage Current (after Clause 15))	-	0	Testing charges included in Cl.16
16.3(Electric Strength (after clause 15 and 16.2))	-	0	Testing charges included in Cl.16
17(Over Load Protection of Transformers and associated circuits)	-	4000	-
17(Overload protection of transformers and associated circuits)	-	0	Testing charges included in Cl.17
18(Endurance)	-	0	-
19(Abnormal Operation)	-	5000	Charges applicable excluding the test of Cl.19.11.4.1 to Cl.19.11.4.7. The testing charges for EMI/EMC testing (Cl.19.11.4.1 to Cl.19.11.4.7) will be applicable
19.17(Abnormal operation)	-	0	Testing charges included in Cl.19
19.11.4.1(Electrostatic discharges)	-	5000	Complete testing Charges applicable excluding the test of Cl.19.11.4.1 to Cl.19.11.4.7. If applicable, The testing charges for EMI/EMC Testing (Cl.19.11.4.1 to Cl.19.11.4.7) will be charged extra
19.11.4.2(Radiated fields)	-	20000	Complete testing Charges applicable excluding the test of Cl.19.11.4.1 to Cl.19.11.4.7. If applicable, The testing charges for EMI/EMC Testing (Cl.19.11.4.1 to Cl.19.11.4.7) will be charged extra
19.11.4.3(Fast transient bursts)	-	5000	Complete testing Charges applicable excluding the test of Cl.19.11.4.1 to Cl.19.11.4.7. If applicable, The testing charges for EMI/EMC Testing (Cl.19.11.4.1 to Cl.19.11.4.7) will be charged extra
19.11.4.4(Surge immunity test)	-	5000	Complete testing Charges applicable excluding the test of Cl.19.11.4.1 to Cl.19.11.4.7. If applicable, The testing charges for EMI/EMC Testing (Cl.19.11.4.1 to Cl.19.11.4.7) will be charged extra
19.11.4.5(Immunity to conducted discharges)	-	10000	Complete testing Charges applicable excluding the test of Cl.19.11.4.1 to Cl.19.11.4.7. If applicable, The testing charges for EMI/EMC Testing (Cl.19.11.4.1 to Cl.19.11.4.7) will be charged extra
19.11.4.6(Class 3 Voltage dips and interruptions)	-	5000	Complete testing Charges applicable excluding the test of Cl.19.11.4.1 to Cl.19.11.4.7. If applicable, The testing charges for EMI/EMC Testing (Cl.19.11.4.1 to Cl.19.11.4.7) will be charged extra
19.11.4.7(Harmonics)	-	5000	Complete testing Charges applicable excluding the test of Cl.19.11.4.1 to Cl.19.11.4.7. If applicable, The testing charges for EMI/EMC Testing (Cl.19.11.4.1 to Cl.19.11.4.7) will be charged extra
20(Stability and mechanical hazards)	-	2000	-
20.1(Stability and mechanical hazards)	-	0	Testing charges included in Cl.20
21(Mechanical Strength)	-	3000	-
21.2(Mechanical strength)	-	0	Testing charges included in Cl.21
21.3(Mechanical strength)	-	0	Testing charges included in Cl.21
22(Construction)	-	5000	-
22.5(Construction)	-	0	Testing charges included in Cl.22
22.6(Construction)	-	0	Testing charges included in Cl.22
22.11(Construction)	-	0	Testing charges included in Cl.22
22.16(Construction)	-	0	Testing charges included in Cl.22
22.32(Construction)	-	0	Testing charges included in Cl.22
22.42(Construction)	-	0	Testing charges included in Cl.22
23(Internal wiring)	-	2000	-
23.3(Internal wiring)	-	0	Testing charges included in Cl.23
24(Components)	-	3000	-
25(Supply connection and external flexible cords)	-	1000	-
25(Supply connection and external flexible cords)	-	0	Testing charges included in Cl.25
25.7(Supply connection and external flexible cords)	-	0	Testing charges included in Cl.25
25.14(Supply connection and external flexible cords)	-	0	Testing charges included in Cl.25
25.15(Supply connection and external flexible cords)	-	0	Testing charges included in Cl.25
26(Terminals for external conductors)	-	1000	-
26.5(Terminals for external conductors)	-	0	Testing charges included in Cl.26
27(Provision for earthing)	-	2000	-
27.5(Provision for earthing)	-	0	Testing charges included in Cl.27
28(Screw test and connections)	-	1000	-
28.1(Screws and connections)	-	0	Testing charges included in Cl.28
29(clearance, creepage distances and solid insulation)	-	2000	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
31(Resistance to Rusting)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
A.2(Earth continuity test)	-	0	Testing charges included in Cl.27
B.22.1(Construction)	-	0	Testing charges included in Cl.22
B.22.3(Construction)	-	0	Testing charges included in Cl.22
B.22.4(Construction)	-	0	Testing charges included in Cl.22
B.22.5(Construction)	-	0	Testing charges included in Cl.22
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
18(Endurance)	-	0	-
16.1(General)	-	0	Testing charges included in Cl.16
15.2(Moisture resistance)	-	0	Testing charges included in Cl.15
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	0	-
10.2(Current input)	-	0	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
14(Transient Over Voltages)	-	0	-
15.0(Moisture resistance)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.2(Spillage Test)	-	0	-
15.3(Humidity Test)	-	0	-
16.0(General)	-	0	-
16(Leakage current and electric strength)	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	0	-
19.17(Abnormal operation)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
20(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
21(Mechanical Strength)	-	0	-
21.2(Mechanical strength)	-	0	-
21.3(Mechanical strength)	-	0	-
22(Construction)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction)	-	0	-
22.11(Construction)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction)	-	0	-
22.42(Construction)	-	0	-
23(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
24(Components)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
25.7(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
28(Screw test and connections)	-	0	-
28.1(Screws and connections)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
30.1(Ball pressure test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.2(Needle Flame Test)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
A.2(Earth continuity test)	-	0	-
B.22.1(Construction)	-	0	-
B.22.3(Construction)	-	0	-
B.22.4(Construction)	-	0	-
B.22.5(Construction)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
18(Endurance)	-	0	-
16.1(General)	-	0	-
15.2(Moisture resistance)	-	0	-
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	0	-
7(Marking and instructions)	-	0	-
8.1.1(Protection against live parts in all positions)	-	0	-
8.1.2(Protection against live parts in openings)	-	0	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	-
8.1.5(Live parts of built-in appliances)	-	0	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	0	-
10.2(Current input)	-	0	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	0	-
11.4(Heating appliances)	-	0	-
11.5(Motor-operated appliances)	-	0	-
11.6(Combined appliances)	-	0	-
11.7(Duration corresponding)	-	0	-
11.8(Temperature rise)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	0	-
13.2(Leakage current at operating temperature)	-	0	-
13.3(Electric Strength at operating temperature)	-	0	-
14(Transient Over Voltages)	-	0	-
15.0(Moisture resistance)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	-
15.2(Spillage Test)	-	0	-
15.3(Humidity Test)	-	0	-
16.0(General)	-	0	-
16(Leakage current and electric strength)	-	0	-
16.2(Leakage Current (after Clause 15))	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-
19(Abnormal Operation)	-	0	-
19.17(Abnormal operation)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
20(Stability and mechanical hazards)	-	0	-
20.1(Stability and mechanical hazards)	-	0	-
21(Mechanical Strength)	-	0	-
21.2(Mechanical strength)	-	0	-
21.3(Mechanical strength)	-	0	-
22(Construction)	-	0	-
22.5(Construction)	-	0	-
22.6(Construction)	-	0	-
22.11(Construction)	-	0	-
22.16(Construction)	-	0	-
22.32(Construction)	-	0	-
22.42(Construction)	-	0	-
23(Internal wiring)	-	0	-
23.3(Internal wiring)	-	0	-
24(Components)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
25(Supply connection and external flexible cords)	-	0	-
25.7(Supply connection and external flexible cords)	-	0	-
25.14(Supply connection and external flexible cords)	-	0	-
25.15(Supply connection and external flexible cords)	-	0	-
26(Terminals for external conductors)	-	0	-
26.5(Terminals for external conductors)	-	0	-
27(Provision for earthing)	-	0	-
27.5(Provision for earthing)	-	0	-
28(Screw test and connections)	-	0	-
28.1(Screws and connections)	-	0	-
29(clearance, creepage distances and solid insulation)	-	0	-
30.1(Ball pressure test)	-	0	-
30.2(Glow Wire Test)	-	0	-
30.2(Needle Flame Test)	-	0	-
31(Resistance to Rusting)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
A.2(Earth continuity test)	-	0	-
B.22.1(Construction)	-	0	-
B.22.3(Construction)	-	0	-
B.22.4(Construction)	-	0	-
B.22.5(Construction)	-	0	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
18(Endurance)	-	0	-
16.1(General)	-	0	-
15.2(Moisture resistance)	-	0	-

20 Jun, 2028

-
iNCLUDED W.E.F.04.03.2025 EXCLUSION Cl 32 (Radiation Toxicity and Similar Hazards) Cl 22.32 (Construction) CL 24 (Components)

2484

BIS, Central Laboratory (CL)

None

IS 13098 (2024)

AUTOMOTIVE VEHICLES TUBES FOR PNEUMATIC TYRES â SPECIFICATION (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3.3.1 (Thickness Uniformity)	-
Cl 4.1.1 (Elongation)	-
Cl 4.1.2 (Strength of Splice)	-
Cl 5 (AIR TIGHTNESS)	-
Cl 3.2 (Classification)	-
Cl 3.1 (Materials)	-
Cl 6 (MARKING)	-

-
-

2485

BIS, Central Laboratory (CL)

None

IS 5143 (2024)

Adjustable Axillary Crutches â Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4 (shape and dimensions)	-
Cl-5 (Workmanship and Finish)	-
Cl-6.1 (Strength Test)	-
Cl-6.2 (Drop Test)	-
Cl-7 (Marking)	-
Cl-6.1 (Strength Test)	-

-
-

2486

Intertek India Private Limited, New Delhi (E-20)

8122426

IS 302 : Part 2 : Sec 4 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 4 spin extractors

110000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(MARKING)	-	1000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	3000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	8000	-
11(HEATING)	-	8000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	8000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	4000	-
15(MOISTURE RESISTANCE)	-	8000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT))	-	8000	-
17(OVERLOAD PROTECTION)	-	5000	-
19(ABNORMAL OPERATION)	-	8000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	5000	-
21(MECHANICAL STRENGTH)	-	4000	-
22(CONSTRUCTION)	-	5000	-
23(INTERNAL WIRING)	-	5000	-
24(COMPONENTS)	-	5000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	2000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	8000	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	9000	-
3(GENERAL REQUIREMENTS)	-	0	-
4(GENERAL NOTES ON TESTS)	-	0	-
5(RATING)	-	0	-
6(CLASSIFICATION)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-

27 Oct, 2028

-
Included w.e.f 25.03.2025 Exclusion : Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC)

2487

BUREAU VERITAS CONSUMER PRODUCTS SERVICES INDIA PRIVATE LIMITED, NOIDA

8127706

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

74000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	15000	-
6(Classification)	-	0	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	0	Testing charges included in Cl.11.1
11.7(Duration corresponding)	-	0	Testing charges included in Cl.11.1
11.6(Combined appliances)	-	0	Testing charges included in Cl.11.1
11.5(Motor-operated appliances)	-	0	Testing charges included in Cl.11.1
11.4(Heating appliances)	-	0	Testing charges included in Cl.11.1
8.1.5(Live parts of built-in appliances)	-	0	Testing charges included in Cl.8.1.1
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	4000	-
16(Leakage current and electric strength)	-	3000	-
4(General requirement)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	2000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	3000	-
23(Internal wiring)	-	2000	-
22(Construction)	-	5000	-
21(Mechanical Strength)	-	3000	-
20(Stability and mechanical hazards)	-	2000	-
19(Abnormal Operation)	-	5000	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	Testing charges included in Cl.17
16.3(Electric Strength (after clause 15 and 16.2))	-	0	Testing charges included in Cl.16
16.2(Leakage Current (after Clause 15))	-	0	Testing charges included in Cl.16
16.1(General)	-	0	Testing charges included in Cl.16
16.0(General)	-	0	Testing charges included in Cl.16
15.3(Humidity Test)	-	0	Testing charges included in Cl.15
15.2(Spillage Test)	-	0	Testing charges included in Cl.15
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	Testing charges included in Cl.15
15.0(Moisture resistance)	-	4000	-
14(Transient Over Voltages)	-	2000	-
13.3(Electric Strength at operating temperature)	-	0	Testing charges included in Cl.13
13.2(Leakage current at operating temperature)	-	0	Testing charges included in Cl.13
13(Leakage current and electric strength at operating temperature)	-	3000	-
11.3(Heating)	-	0	Testing charges included in Cl.11.1
11.2(General)	-	0	Testing charges included in Cl.11.1
11.1(General)	-	4000	-
10.2(Current input)	-	1000	-
10.1(Power input)	-	1000	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	Testing charges included in Cl.8.1.1
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	Testing charges included in Cl.8.1.1
8.1.2(Protection against live parts in openings)	-	0	Testing charges included in Cl.8.1.1
8.1.1(Protection against live parts in all positions)	-	2000	-
7(Marking and instructions)	-	2000	-
A.2(Earth continuity test)	-	0	Testing charges included in Cl.27
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
15.2(Moisture resistance)	-	0	Testing charges included in Cl.15
19.17(Abnormal operation)	-	0	Testing charges included in Cl.19
20.1(Stability and mechanical hazards)	-	0	Testing charges included in Cl.20
21.2(Mechanical strength)	-	0	Testing charges included in Cl.21
21.3(Mechanical strength)	-	0	Testing charges included in Cl.21
22.5(Construction)	-	0	Testing charges included in Cl.22
22.6(Construction)	-	0	Testing charges included in Cl.22
22.11(Construction)	-	0	Testing charges included in Cl.22
22.16(Construction)	-	0	Testing charges included in Cl.22
22.32(Construction)	-	0	Testing charges included in Cl.22
22.42(Construction)	-	0	Testing charges included in Cl.22
23.3(Internal wiring)	-	0	Testing charges included in Cl.23
25(Supply connection and external flexible cords)	-	0	Testing charges included in Cl.25
25.7(Supply connection and external flexible cords)	-	0	Testing charges included in Cl.25
25.14(Supply connection and external flexible cords)	-	0	Testing charges included in Cl.25
25.15(Supply connection and external flexible cords)	-	0	Testing charges included in Cl.25
26.5(Terminals for external conductors)	-	0	Testing charges included in Cl.26
27.5(Provision for earthing)	-	0	Testing charges included in Cl.27
28.1(Screws and connections)	-	0	Testing charges included in Cl.28
B.22.1(Construction)	-	0	Testing charges included in Cl.22
B.22.3(Construction)	-	0	Testing charges included in Cl.22
B.22.4(Construction)	-	0	Testing charges included in Cl.22
B.22.5(Construction)	-	0	Testing charges included in Cl.22
12(Charging of metal-ion batteries)	-	0	Testing charges included in Cl.12
6(Classification)	-	0	-
5(General conditions for the tests)	-	0	-
11.8(Temperature rise)	-	0	Testing charges included in Cl.11.1
11.7(Duration corresponding)	-	0	Testing charges included in Cl.11.1
11.6(Combined appliances)	-	0	Testing charges included in Cl.11.1
11.5(Motor-operated appliances)	-	0	Testing charges included in Cl.11.1
11.4(Heating appliances)	-	0	Testing charges included in Cl.11.1
8.1.5(Live parts of built-in appliances)	-	0	Testing charges included in Cl.8.1.1
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	Testing charges included in Cl.17
16(Leakage current and electric strength)	-	0	Testing charges included in Cl.16
4(General requirement)	-	0	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
31(Resistance to Rusting)	-	0	-
30.2(Needle Flame Test)	-	0	Testing charges included in Cl.30.2
30.2(Glow Wire Test)	-	0	Testing charges included in Cl.30.2
30.1(Ball pressure test)	-	0	Testing charges included in Cl.30.1
29(clearance, creepage distances and solid insulation)	-	0	Testing charges included in Cl.29
28(Screw test and connections)	-	0	Testing charges included in Cl.28
27(Provision for earthing)	-	0	Testing charges included in Cl.27
26(Terminals for external conductors)	-	0	Testing charges included in Cl.26
25(Supply connection and external flexible cords)	-	0	Testing charges included in Cl.25
24(Components)	-	0	Testing charges included in Cl.24
23(Internal wiring)	-	0	Testing charges included in Cl.23
22(Construction)	-	0	Testing charges included in Cl.22
21(Mechanical Strength)	-	0	Testing charges included in Cl.21
20(Stability and mechanical hazards)	-	0	Testing charges included in Cl.21
19(Abnormal Operation)	-	0	Testing charges included in Cl.19
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	Testing charges included in Cl.17
16.3(Electric Strength (after clause 15 and 16.2))	-	0	Testing charges included in Cl.16
16.2(Leakage Current (after Clause 15))	-	0	Testing charges included in Cl.16
16.1(General)	-	0	Testing charges included in Cl.16
16.0(General)	-	0	Testing charges included in Cl.16
15.3(Humidity Test)	-	0	Testing charges included in Cl.15
15.2(Spillage Test)	-	0	Testing charges included in Cl.15
15.1(Ingress Protection test other than IPX0 (IP test))	-	0	Testing charges included in Cl.15
15.0(Moisture resistance)	-	0	Testing charges included in Cl.15
14(Transient Over Voltages)	-	0	Testing charges included in Cl.14
13.3(Electric Strength at operating temperature)	-	0	Testing charges included in Cl.13
13.2(Leakage current at operating temperature)	-	0	Testing charges included in Cl.13
13(Leakage current and electric strength at operating temperature)	-	0	Testing charges included in Cl.13
11.3(Heating)	-	0	Testing charges included in Cl.11.1
11.2(General)	-	0	Testing charges included in Cl.11.1
11.1(General)	-	0	Testing charges included in Cl.11.1
10.2(Current input)	-	0	Testing charges included in Cl.10.2
10.1(Power input)	-	0	Testing charges included in Cl.10.1
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	0	Testing charges included in Cl.8.1.1
8.1.3(Protection against live parts in visible glowing heating elements)	-	0	Testing charges included in Cl.8.1.1
8.1.2(Protection against live parts in openings)	-	0	Testing charges included in Cl.8.1.1
8.1.1(Protection against live parts in all positions)	-	0	Testing charges included in Cl.8.1.1
7(Marking and instructions)	-	0	Testing charges included in Cl.7
A.2(Earth continuity test)	-	0	Testing charges included in Cl.27
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
15.2(Moisture resistance)	-	0	Testing charges included in Cl.15
19.17(Abnormal operation)	-	0	Testing charges included in Cl.19
20.1(Stability and mechanical hazards)	-	0	Testing charges included in Cl.20
21.2(Mechanical strength)	-	0	Testing charges included in Cl.21
21.3(Mechanical strength)	-	0	Testing charges included in Cl.21
22.5(Construction)	-	0	Testing charges included in Cl.22
22.6(Construction)	-	0	Testing charges included in Cl.22
22.11(Construction)	-	0	Testing charges included in Cl.22
22.16(Construction)	-	0	Testing charges included in Cl.22
22.32(Construction)	-	0	Testing charges included in Cl.22
22.42(Construction)	-	0	Testing charges included in Cl.22
23.3(Internal wiring)	-	0	Testing charges included in Cl.23
25(Supply connection and external flexible cords)	-	0	Testing charges included in Cl.25
25.7(Supply connection and external flexible cords)	-	0	Testing charges included in Cl.25
25.14(Supply connection and external flexible cords)	-	0	Testing charges included in Cl.25
25.15(Supply connection and external flexible cords)	-	0	Testing charges included in Cl.25
26.5(Terminals for external conductors)	-	0	Testing charges included in Cl.26
27.5(Provision for earthing)	-	0	Testing charges included in Cl.27
28.1(Screws and connections)	-	0	Testing charges included in Cl.28
B.22.1(Construction)	-	0	Testing charges included in Cl.22
B.22.3(Construction)	-	0	Testing charges included in Cl.22
B.22.4(Construction)	-	0	Testing charges included in Cl.22
B.22.5(Construction)	-	0	Testing charges included in Cl.22
12(Charging of metal-ion batteries)	-	-	-
6(Classification)	-	-	-
5(General conditions for the tests)	-	-	-
11.8(Temperature rise)	-	-	-
11.7(Duration corresponding)	-	-	-
11.6(Combined appliances)	-	-	-
11.5(Motor-operated appliances)	-	-	-
11.4(Heating appliances)	-	-	-
8.1.5(Live parts of built-in appliances)	-	-	-
18(Endurance)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
16(Leakage current and electric strength)	-	-	-
4(General requirement)	-	-	-
32(Radiation Toxicity and Similar Hazards)	-	-	-
31(Resistance to Rusting)	-	-	-
30.2(Needle Flame Test)	-	-	-
30.2(Glow Wire Test)	-	-	-
30.1(Ball pressure test)	-	-	-
29(clearance, creepage distances and solid insulation)	-	-	-
28(Screw test and connections)	-	-	-
27(Provision for earthing)	-	-	-
26(Terminals for external conductors)	-	-	-
25(Supply connection and external flexible cords)	-	-	-
24(Components)	-	-	-
23(Internal wiring)	-	-	-
22(Construction)	-	-	-
21(Mechanical Strength)	-	-	-
20(Stability and mechanical hazards)	-	-	-
19(Abnormal Operation)	-	-	-
18(Endurance)	-	-	-
17(Over Load Protection of Transformers and associated circuits)	-	-	-
16.3(Electric Strength (after clause 15 and 16.2))	-	-	-
16.2(Leakage Current (after Clause 15))	-	-	-
16.1(General)	-	-	-
16.0(General)	-	-	-
15.3(Humidity Test)	-	-	-
15.2(Spillage Test)	-	-	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	-	-
15.0(Moisture resistance)	-	-	-
14(Transient Over Voltages)	-	-	-
13.3(Electric Strength at operating temperature)	-	-	-
13.2(Leakage current at operating temperature)	-	-	-
13(Leakage current and electric strength at operating temperature)	-	-	-
11.3(Heating)	-	-	-
11.2(General)	-	-	-
11.1(General)	-	-	-
10.2(Current input)	-	-	-
10.1(Power input)	-	-	-
9(Starting of motor operation test requirements and tests)	-	-	-
8.1.4(Protection against live parts against protective impedance)	-	-	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	-	-
8.1.2(Protection against live parts in openings)	-	-	-
8.1.1(Protection against live parts in all positions)	-	-	-
7(Marking and instructions)	-	-	-
A.2(Earth continuity test)	-	-	-
Annex C(Ageing test on motors)	-	-	-
Annex D(Thermal motor protectors)	-	-	-
15.2(Moisture resistance)	-	-	-
19.17(Abnormal operation)	-	-	-
20.1(Stability and mechanical hazards)	-	-	-
21.2(Mechanical strength)	-	-	-
21.3(Mechanical strength)	-	-	-
22.5(Construction)	-	-	-
22.6(Construction)	-	-	-
22.11(Construction)	-	-	-
22.16(Construction)	-	-	-
22.32(Construction)	-	-	-
22.42(Construction)	-	-	-
23.3(Internal wiring)	-	-	-
25(Supply connection and external flexible cords)	-	-	-
25.7(Supply connection and external flexible cords)	-	-	-
25.14(Supply connection and external flexible cords)	-	-	-
25.15(Supply connection and external flexible cords)	-	-	-
26.5(Terminals for external conductors)	-	-	-
27.5(Provision for earthing)	-	-	-
28.1(Screws and connections)	-	-	-
B.22.1(Construction)	-	-	-
B.22.3(Construction)	-	-	-
B.22.4(Construction)	-	-	-
B.22.5(Construction)	-	-	-

31 Dec, 2026

-
Included w.e.f 29.05.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

2488

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 302 : Part 2 : Sec 13 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 13 Deep Fat Fryers, Frying Pans and Similar Appliances (First Revision)

Deep Fat Fryers, Frying Pans and Similar Appliances

32500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	600	-
8(Protection against access to live parts)	-	1000	-
10(Power input and current)	-	2000	-
11(Heating)	-	2500	-
13.1 &13.2(Leakage current test)	-	1000	-
13.1 &13.3(Electric strength test)	-	1000	-
14(Transient overvoltages)	-	1500	-
15(Moisture resistance)	-	3000	-
15.101(Moisture resistance)	-	3000	-
16.1 &16.2(Leakage current test)	-	1000	-
16.1 & 16.3(Electric strength test)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	2500	-
19.101 to to 19.102(Abnormal operation)	-	2500	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	2500	-
22.101(Construction)	-	2500	-
23(Internal wiring)	-	1000	-
25("Supply connection and external flexible cords")	-	1500	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	1200	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	1500	-
30(Resistance to heat and fire)	-	2000	-
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	1000	-
24(Components)	-	500	-
15.3(Moisture resistance)	-	3000	-

31 Dec, 2026

-
Included w.e.f.19.05.2025 Exclusion 24 (Components)

2489

SGS INDIA PRIVATE LTD. ( LAB_JOKA), KOLKATA

5132706

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli)	-	200	-
6.1.2(Coliform)	-	200	-
6.1.3(Faecal Streptococci)	-	200	-
6.1.4(Sulphite Reducing Anaerobe)	-	200	-
6.1.5(Pseudomonas aeruginosa)	-	200	-
6.1.6(Yeast and moould)	-	200	-
6.1.7(Salmonella)	-	150.00	-
6.1.8(Vibrio Cholera)	-	150.00	-
6.2/Table 1/i(Colour)	-	100.00	-
6.2/Table 1/ii(Odour)	-	100.00	-
6.2/Table 1/iii(Taste)	-	100.00	-
6.2/Table 1/iv(Turbidity)	-	150.00	-
6.2/Table 1/v(Total Dissoved)	-	100.00	-
6.2/Table 1/vi(pH Value)	-	50.00	-
6.2/Table 2/i(Nitrate)	-	100.00	-
6.2/Table 2/ii(Nitrite)	-	100.00	-
6.2/Table 2/iii(Sulphide)	-	100.00	-
6.2/Table 2/iv(Manganese)	-	100.00	-
6.2/Table 2/v(Copper)	-	100.00	-
6.2/Table 2/vi(Fluoride)	-	150.00	-
6.2/Table 2/vii(Barium)	-	100.00	-
6.2/Table 2/viii(Antimony)	-	100.00	-
6.2/Table 2/ix(Borate)	-	100.00	-
6.2/Table 2/x(Silver)	-	100.00	-
6.2/Table 2/xi(Chloride)	-	150.00	-
6.2/Table 2/xii(Sulphate)	-	150.00	-
6.2/Table 2/xiii(Magnesium)	-	200.00	-
6.2/Table 2/xiv(Calcium)	-	200.00	-
6.2/Table 2/xv(Sodium)	-	200.00	-
6.2/Table 2/xvi(Alkalinity)	-	200.00	-
6.2/Table 2/xvii(Selenium)	-	200.00	-
6.2/Table 2/xviii(Mineral Oil)	-	200.00	-
6.2/Table 2/xix(Phenolic Compounds)	-	200.00	-
6.2/Table 2/xx(Anionic Surface active agents)	-	200.00	-
6.2/Table 3/i(Arsenic)	-	200.00	-
6.2/Table 3/ii(Cadmium)	-	200.00	-
6.2/Table 3/iii(Cyanide)	-	200.00	-
6.2/Table 3/iv(Chromium)	-	200.00	-
6.2/Table 3/v(Mercury)	-	200.00	-
6.2/Table 3/vi(Lead)	-	200.00	-
6.2/Table 3/vii(Nickel)	-	200.00	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	300.00	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	300.00	-
6.2/Table 3/x(Uranium)	-	200	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	50	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	50	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	50	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	50	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	50	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	50	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	100	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	100	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	100	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	100	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	100	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	100	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	100	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	100	-
Cl- 6.3, Annex N (vi)(Ethion)	-	100	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	100	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	100	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	100	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	100	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	100	-
Cl- 6.3, Annex N (x)(Butachlor)	-	100	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	100	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	100	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	100	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	100	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	100	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	100	-
Cl-6.1.3(Staphylococcus aureus)	-	200	-
Cl-6.1.7(Shigella)	-	200	-
Cl-6.1.8(V. parahaemolyticus)	-	200	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	100	-
Cl- 6.3, Annex N (xv)(Malathion)	-	100	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	0	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	0	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	100	-
6.1.1(Escherichia coli)	-	0	-
6.1.2(Coliform)	-	0	-
6.1.3(Faecal Streptococci)	-	0	-
6.1.4(Sulphite Reducing Anaerobe)	-	0	-
6.1.5(Pseudomonas aeruginosa)	-	0	-
6.1.6(Yeast and moould)	-	0	-
6.1.7(Salmonella)	-	0	-
6.1.8(Vibrio Cholera)	-	0	-
6.2/Table 1/i(Colour)	-	0	-
6.2/Table 1/ii(Odour)	-	0	-
6.2/Table 1/iii(Taste)	-	0	-
6.2/Table 1/iv(Turbidity)	-	0	-
6.2/Table 1/v(Total Dissoved)	-	0	-
6.2/Table 1/vi(pH Value)	-	0	-
6.2/Table 2/i(Nitrate)	-	0	-
6.2/Table 2/ii(Nitrite)	-	0	-
6.2/Table 2/iii(Sulphide)	-	0	-
6.2/Table 2/iv(Manganese)	-	0	-
6.2/Table 2/v(Copper)	-	0	-
6.2/Table 2/vi(Fluoride)	-	0	-
6.2/Table 2/vii(Barium)	-	0	-
6.2/Table 2/viii(Antimony)	-	0	-
6.2/Table 2/ix(Borate)	-	0	-
6.2/Table 2/x(Silver)	-	0	-
6.2/Table 2/xi(Chloride)	-	0	-
6.2/Table 2/xii(Sulphate)	-	0	-
6.2/Table 2/xiii(Magnesium)	-	0	-
6.2/Table 2/xiv(Calcium)	-	0	-
6.2/Table 2/xv(Sodium)	-	0	-
6.2/Table 2/xvi(Alkalinity)	-	0	-
6.2/Table 2/xvii(Selenium)	-	0	-
6.2/Table 2/xviii(Mineral Oil)	-	0	-
6.2/Table 2/xix(Phenolic Compounds)	-	0	-
6.2/Table 2/xx(Anionic Surface active agents)	-	0	-
6.2/Table 3/i(Arsenic)	-	0	-
6.2/Table 3/ii(Cadmium)	-	0	-
6.2/Table 3/iii(Cyanide)	-	0	-
6.2/Table 3/iv(Chromium)	-	0	-
6.2/Table 3/v(Mercury)	-	0	-
6.2/Table 3/vi(Lead)	-	0	-
6.2/Table 3/vii(Nickel)	-	0	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	0	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	0	-
6.2/Table 3/x(Uranium)	-	0	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	-
Cl- 6.3, Annex N (vi)(Ethion)	-	0	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	-
Cl- 6.3, Annex N (x)(Butachlor)	-	0	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	-
Cl-6.1.3(Staphylococcus aureus)	-	0	-
Cl-6.1.7(Shigella)	-	0	-
Cl-6.1.8(V. parahaemolyticus)	-	0	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	-
Cl- 6.3, Annex N (xv)(Malathion)	-	0	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	0	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	0	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	-

08 Dec, 2027

-
Included w.e.f.15.04.2025 Exclusion Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)) Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

2490

BIS, Central Laboratory (CL)

None

IS 18663 (2024)

Note Sorting Machines- Specifications

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1, 6.2 Table-1 (i) (Objects not recognized as banknotes)	-
Cl-4.1, 6.2 Table-1 (ii) (Suspect/counterfeit banknotes)	-
Cl-4.1, 6.2 Table-1 (iii) (Banknotes that are not clearly authenticated)	-
Cl-4.1, 6.2 Table-1 (iv) (a) (Banknotes that are identified as genuine and fit;)	-
Cl-4.1, 6.2 Table-1 (iv) (b) (Banknotes that are identified as genuine and unfit)	-
Cl-4.1, Table-2 (i) (Piece counting)	-
Cl-4.1, Table-2 (ii) (Value counting)	-
Cl-4.1, Table-2 (iii) (Authenticity determination)	-
Cl-4.1, Table-2 (iv) (Fitness determination)	-
Cl-4.1, Table-2 (v) (Sorting of banknotes)	-
Cl-4.3, Table-3 (i) (Serial number recognition)	-
Cl-4.3, Table-3 (ii) (Data storage and reproduction)	-
6.2.1 (Speed Test)	-
6.2.2 (Authenticity Test)	-
6.2.3 (Fitness Test)	-
6.2.4 (Repeatability Test)	-
6.2.5 (Stress Test)	-
6.2.6 (Piece Counting Test)	-
6.2.7 (Values Counting Test)	-

-
Complete testing facility except "Safety requirements (Cl.4.2) and safety tests (Cl.6.1)".

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number