BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15360 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

2521

Indian Oil Corporation Ltd (IOCL), Madurai Smart Laboratory

6194114

IS 2796 (2017)

Motor gasoline - Specification (Sixth Revision)

12980 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (i)(Appearance)	-	200	Excluding GST and applicable for financial year 2025-26
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a)("Colour: MG 91")	-	200	Excluding GST and applicable for financial year 2025-26
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iii)(Density at 15°C, kg/m³)	-	1130	Excluding GST and applicable for financial year 2025-26
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline)	-	2650	Includes clause number Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a) to Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e) Excluding GST and applicable for financial year 2025-26
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: E10)	-	2650	Includes clause number Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a) to Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e) Excluding GST and applicable for financial year 2025-26
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (b)(percent evaporated at 100°C (E 100 °C), percent v/v)	-	2650	Includes clause number Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a) to Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e) Excluding GST and applicable for financial year 2025-26
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (c)(percent evaporated at 150°C (E 150 °C), percent v/v, Min)	-	2650	Includes clause number Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a) to Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e) Excluding GST and applicable for financial year 2025-26
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (d)(Final boiling point, °C, Max)	-	2650	Includes clause number Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a) to Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e) Excluding GST and applicable for financial year 2025-26
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e)(Residue, percent by volume, Max)	-	2650	Includes clause number Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a) to Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e) Excluding GST and applicable for financial year 2025-26
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vii)(Gum content (Solvent washed), g/m3, Max)	-	2070	Excluding GST and applicable for financial year 2025-26
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (viii)(Total sulphur, mg/kg, Max)	-	4710	Excluding GST and applicable for financial year 2025-26
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiii)(Copper strip corrosion, for 3 h at 50°C, Max)	-	1130	Excluding GST and applicable for financial year 2025-26
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a) Motor gasoline)	-	690	Excluding GST and applicable for financial year 2025-26
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a):- E10)	-	690	Excluding GST and applicable for financial year 2025-26
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b)("Colour: MG 95")	-	200	Includes Clause no Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a) ("Colour: MG 91") Excluding GST and applicable for financial year 2025-26

19 Dec, 2028

-
Excluding: Cl-4.1 (General- Requirements) Cl-4.1.2 (Antioxidants) Cl-4.1.3 (Metal Deactivators) Cl-4.2.1 (Organic Oxygenates- Permitted Components) Cl-4.1.5 (Motor gasoline multifunctional additives (MFA),) Cl-4.2.1 (Organic Oxygenates- Permitted Components) Cl-4.3 (Other Requirements) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (a) (Research octane number (RON), Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b) (Research octane number (RON), Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a) (Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b) (Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a) (Vapour lock index (VLI),Max :- MG (without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max) Cl-5.2 (Marketing)

2522

Indian Oil Corporation Ltd (IOCL), Madurai Smart Laboratory

6194114

IS 1460 (2025)

Automotive Diesel Fuel - Specification (seventh revision)

15880 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1.4 , 3.2, Table-1 (i)(Appearance)	-	200	Excluding GST and applicable for financial year 2025-26
Cl-3.1.4 , 3.2, Table-1 (vi)(Cetane index, Min)	-	3770	(Includes Density and Distillation test charges) Excluding GST and applicable for financial year 2025-26
Cl-3.1.4 , 3.2, Table-1 (vii) (a)(Pour point3, °C, Max: Winter)	-	1900	Excluding GST and applicable for financial year 2025-26
Cl-3.1.4 , 3.2, Table-1 (vii) (b)(Pour point3, °C, Max: Summer)	-	1900	Excluding GST and applicable for financial year 2025-26
Cl-3.1.4 , 3.2, Table-1 (viii)(Copper strip corrosion for 3 h at 50 °C, Max)	-	1130	Excluding GST and applicable for financial year 2025-26
Cl-3.1.4 , 3.2, Table-1 (ix)(Distillation, 95 percent v/v recovery, °C, Max)	-	2650	Excluding GST and applicable for financial year 2025-26
Cl-3.1.4 , 3.2, Table-1 (x)(Flash point, Abel4, °C, Min)	-	1900	Excluding GST and applicable for financial year 2025-26
Cl-3.1.4 , 3.2, Table-1 (xi)(Kinematic viscosity, mm2/s, at 40 °C)	-	2270	Excluding GST and applicable for financial year 2025-26
Cl-3.1.4 , 3.2, Table-1 (xiv)(Total sulphur, mg/kg, Max)	-	4710	Excluding GST and applicable for financial year 2025-26
Cl-3.1.4 , 3.2, Table-1 (xiii)(Density at 15 °C, kg/m3)	-	1130	Excluding GST and applicable for financial year 2025-26

19 Dec, 2028

-
Excluding: Cl-3.1 (General- Requirements) Cl-3.1.4 , 3.2, Table-1 (ii) C (Total Acid Number (TAN), mg of KOH/g, Max) Cl-3.1.4 , 3.2, Table-1 (iii) (Ash, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (iv) (Carbon residue, on 10 percent residue1, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (v) (Cetane number, Min) Cl-3.1.4 , 3.2, Table-1 (xii) (Total contamination, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xv) (Water content, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xvi) (a) (Cold Filter Plugging Point (CFPP)3, °C, Max: Winter) Cl-3.1.4 , 3.2, Table-1 (xvi) (b) (Cold Filter Plugging Point (CFPP)3, °C, Max: Summer) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, g/m3, Max) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), hours, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xix) (Polycyclic Aromatic Hydrocarbon (PAH), percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (xx) (Lubricity, wear scar diameter (wsd) at 60 ºC, μm, Max) Cl-3.1.4 , 3.2, Table-1 (xxi) (FAME content7, percent v/v, Max) Cl-5.2 (Marking) Cl-3.2 (Composition)

2523

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 4246 (2025)

DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision )

All Type

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General - IS 4246 : 2025)	-	500	20%Discount to BIS GSTIN as per govt rule
4.1(General - IS 4246 : 2025)	-	500	-
4.1.1(General - IS 4246 : 2025)	-	500	-
5(Materials - Cl. 5 of IS 5116)	-	2500	Excluding Compliance test as per IS 2553 Part 1
5.1.1(Materials - Toughened glass, if provided,)	-	2500	-
5.1.1(Materials - Toughened glass, if provided,)	-	2500	-
5.1.1(Materials - Toughened glass, if provided,)	-	2500	-
5.1.1(Materials - Toughened glass, if provided,)	-	2500	-
5.1.1(Materials - Toughened glass, if provided,)	-	2500	-
5.1.1(Materials - Toughened glass, if provided,)	-	2500	-
5.1.1(Materials - Toughened glass, if provided,)	-	2500	-
5.1.1(Materials - Toughened glass, if provided,)	-	2500	-
5.1.1(Materials - Toughened glass, if provided,)	-	2500	-
5.1(Materials - IS 5116)	-	2500	-
5.1(Materials - IS 5116)	-	2500	-
5.1.1(Materials - IS 5116)	-	2500	-
5.1.1(Materials - IS 5116)	-	2500	-
5.2(Materials - IS 5116)	-	2500	-
5.2(Materials - IS 5116)	-	2500	-
5.3(Materials - IS 5116)	-	2500	-
5.5(Materials - IS 5116)	-	2500	-
5.5(Materials - IS 5116)	-	2500	-
5.5(Materials - IS 5116)	-	2500	-
5.7(Materials - IS 5116)	-	2500	-
6.1(Design for Maintainance)	-	500	-
6.1(Design for Maintainance)	-	500	-
6.2(Design for Maintainance)	-	500	-
6.2(Design for Maintainance)	-	500	-
6.3(Design for Maintainance)	-	500	-
6.4(Design for Maintainance)	-	500	-
6.5(Design for Maintainance)	-	500	-
6.6(Design for Maintainance)	-	500	-
7.0(Rigidity and Stability)	-	500	-
7.1(Rigidity and Stability)	-	500	-
7.2(Rigidity and Stability)	-	500	-
7.3(Rigidity and Stability)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	-
8.2(Workmanship and Finish -)	-	1000	-
8.3(Workmanship and Finish -)	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	200	-
11.1(Burners- Cl. 10 of IS 5116)	-	200	-
11.1(Burners- Cl. 10 of IS 5116)	-	200	-
11.1(Burners- Cl. 10 of IS 5116)	-	200	-
11.1(Burners- Cl. 10 of IS 5116)	-	200	-
11.2(Burners)	-	200	-
11.3(Burners)	-	200	-
11.4(Burners)	-	200	-
12.1(Burner Pan Support)	-	200	-
12.2(Burner Pan Support)	-	200	-
12.3(Burner Pan Support)	-	200	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	500	-
13,2(Gas Soundness Test)	-	500	-
13.2(Gas Leak Detector)	-	200	Excluding Conform to the requirement 13432 Part 1
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	500	-
14.3(Gas Inlet Connection)	-	500	-
14.4(Gas Inlet Connection)	-	500	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	500	-
14.6(Gas Inlet Connection)	-	500	-
15.0(Strength and Rigidity)	-	500	-
15.0(Strength and Rigidity)	-	500	-
15.0(Strength and Rigidity)	-	500	-
15.0(Strength and Rigidity)	-	500	-
17.0(Gas Consumption Test)	-	2000	-
17.0(Gas Consumption Test)	-	2000	-
17.0(Gas Consumption Test)	-	2000	-
17.0(Gas Consumption Test)	-	2000	-
17.0(Gas Consumption Test)	-	2000	-
17.0(Gas Consumption Test)	-	2000	-
17.2(Gas Consumption Test - For Gas Stoves)	-	2000	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	2000	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	2000	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	2000	-
17.3(Gas Consumption Test - For Built in Hobs)	-	2000	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	2000	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	2000	-
18.1(Ignition and Flame Travel)	-	500	-
18.1(Ignition and Flame Travel)	-	500	-
18.2(Ignition and Flame Travel)	-	500	-
18.3(Ignition and Flame Travel)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
19.1(Flame Stability)	-	500	-
19.1.1(Flame Stability)	-	500	-
19.2(Flame Stability)	-	500	-
19.3(Flame Stability)	-	500	-
20(Noise Control)	-	200	-
21(Flash Back)	-	600	-
22(Formation of Soot)	-	500	-
23(Resistance to Draught)	-	300	-
24.1(Combustion)	-	800	-
24.1(Combustion)	-	800	-
24.2(Combustion)	-	800	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.2(Fire Hazard and Limiting Temperatures)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2500	-
26.1(Thermal Efficiency- Gas Stoves)	-	2500	-
26.1(Thermal Efficiency- Gas Stoves)	-	2500	-
26.1(Thermal Efficiency- Gas Stoves)	-	2500	-
26.1(Thermal Efficiency- Gas Stoves)	-	2500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2500	-
4.1(General - IS 4246 : 2025)	-	-	-
4.1(General - IS 4246 : 2025)	-	-	-
4.1.1(General - IS 4246 : 2025)	-	-	-
5(Materials - Cl. 5 of IS 5116)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1.1(Materials - Toughened glass, if provided,)	-	-	-
5.1(Materials - IS 5116)	-	-	-
5.1(Materials - IS 5116)	-	-	-
5.1.1(Materials - IS 5116)	-	-	-
5.1.1(Materials - IS 5116)	-	-	-
5.2(Materials - IS 5116)	-	-	-
5.2(Materials - IS 5116)	-	-	-
5.3(Materials - IS 5116)	-	-	-
5.5(Materials - IS 5116)	-	-	-
5.5(Materials - IS 5116)	-	-	-
5.5(Materials - IS 5116)	-	-	-
5.7(Materials - IS 5116)	-	-	-
6.1(Design for Maintainance)	-	-	-
6.1(Design for Maintainance)	-	-	-
6.2(Design for Maintainance)	-	-	-
6.2(Design for Maintainance)	-	-	-
6.3(Design for Maintainance)	-	-	-
6.4(Design for Maintainance)	-	-	-
6.5(Design for Maintainance)	-	-	-
6.6(Design for Maintainance)	-	-	-
7.0(Rigidity and Stability)	-	-	-
7.1(Rigidity and Stability)	-	-	-
7.2(Rigidity and Stability)	-	-	-
7.3(Rigidity and Stability)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	-	-
8.2(Workmanship and Finish -)	-	-	-
8.3(Workmanship and Finish -)	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
10(Injector Jets)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.1(Burners- Cl. 10 of IS 5116)	-	-	-
11.2(Burners)	-	-	-
11.3(Burners)	-	-	-
11.4(Burners)	-	-	-
12.1(Burner Pan Support)	-	-	-
12.2(Burner Pan Support)	-	-	-
12.3(Burner Pan Support)	-	-	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	-	-
13,2(Gas Soundness Test)	-	-	-
13.2(Gas Leak Detector)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.2(Gas Inlet Connection)	-	-	-
14.3(Gas Inlet Connection)	-	-	-
14.4(Gas Inlet Connection)	-	-	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	-	-
14.6(Gas Inlet Connection)	-	-	-
15.0(Strength and Rigidity)	-	-	-
15.0(Strength and Rigidity)	-	-	-
15.0(Strength and Rigidity)	-	-	-
15.0(Strength and Rigidity)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.0(Gas Consumption Test)	-	-	-
17.2(Gas Consumption Test - For Gas Stoves)	-	-	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	-	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	-	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	-	-
17.3(Gas Consumption Test - For Built in Hobs)	-	-	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	-	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	-	-
18.1(Ignition and Flame Travel)	-	-	-
18.1(Ignition and Flame Travel)	-	-	-
18.2(Ignition and Flame Travel)	-	-	-
18.3(Ignition and Flame Travel)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	-	-
19.1(Flame Stability)	-	-	-
19.1.1(Flame Stability)	-	-	-
19.2(Flame Stability)	-	-	-
19.3(Flame Stability)	-	-	-
20(Noise Control)	-	-	-
21(Flash Back)	-	-	-
22(Formation of Soot)	-	-	-
23(Resistance to Draught)	-	-	-
24.1(Combustion)	-	-	-
24.1(Combustion)	-	-	-
24.2(Combustion)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.1(Fire Hazard and Limiting Temperatures)	-	-	-
25.2(Fire Hazard and Limiting Temperatures)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.1(Thermal Efficiency- Gas Stoves)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-
26.2(Thermal Efficiency- For Built in Hobs)	-	-	-

12 Sep, 2028

-
Included w.e.f. 04.11.2025

2524

Eastern Regional Laboratory (IOCL), Howrah Terminal

5192414

IS 1571 (2018)

Aviation turbine fuels, kerosine type, jet - A - 1 - Specification (Tenth Revision)

33600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.2.2, 3.2.6, Table-1, (v) (b)(Smoke point, mm, Min or)	-	1130	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (c)(Density at 15°C,kg/m3)	-	1130	-
Cl-3.2.2, 3.2.6, Table-1 (B)(Colour)	-	1130	-
Cl-3.2.2, 3.2.6, Table-1, (vi) (b)(Silver stripcorrosion12) classification, for 4 h at 50°C, (Defense requirements))	-	1130	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 1)(Distillation:- Initial boiling point, °)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 2)(Distillation:- 10 percent recovery °Cv/,v , Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 3)(Distillation:- 50 percent recovery °C, v/v)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 4)(Distillation:- 90 percent recovery °C, v/v)	-	2650	-
Cl-3.2.2, 3.2.6, Table- 1, (iii) (a), 5)(Distillation:- Final boiling point,°C, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 6)(Distillation:- Residue, percent v/v, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 7)(Distillation:- Loss, percent v/v, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (d)(Sulphur mercaptan, percent m/m. Max)	-	1900	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (b)(Flash point ( Abel ), °C, Min)	-	1900	-
Cl-3.2.2, 3.2.6, Table- 1, (iv) (a)(Fluidity:- Freezing point, °C, Max)	-	2270	-
Cl-3.2.2, 3.2.6, Table-1, (iv) (b)(Fluidity:- Kinematic viscosity at minus 20°C, mm2/s, Max)	-	2270	-
Cl-3.2.2, 3.2.6, Table-1, (v) (a)(Specific energy10) MJ/kg, Min)	-	2480	-
Cl-3.2.2, 3.2.6, Table-1, (v) (b) 2)(Naphthalenes, percent v/v, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (vi) (a)(Copper strip corrosion for 2 h at 100°C)	-	1130	-
Cl-3.2.2, 3.2.6, Table-1, (viii)(Contaminants: Existent gum, mg/100 ml, Max)	-	2070	-
Cl-3.2.2, 3.2.6, Table-1 (a)(Visual appearance)	-	200	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (c)(Total sulphur percent by mass, Max)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (a)(Total acidi,t y mg KOHM/ga, x)	-	1530	-
Cl-3.2.2, 3.2.6, Table-1, (x)(Conductivity: Electrical conductivity, pS/m19))	-	1340	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (b)("Aromatics, percent by volMumaex, or Total Aromatics, percent by volume, Max")	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (vi) (b)("Silver stripcorrosion12) classification, for 4 h at 50°C, Max")	-	1340	-
Cl-3.2.2, 3.2.6, Table-1, (ix) a)(Water reaction: Interface rating16), Max)	-	780	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (e)(Doctor Test)	-	400	-
Cl-3.2.2, 3.2.6, Table-1, (iii) (a), 3)(Distillation:- 50 percent recovery °C, v/v)	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (b)(Aromatics, percent by vol (Defense requirements))	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (c)(Total sulphur percent by mass, Max (Defense requirements))	-	2650	-
Cl-3.2.2, 3.2.6, Table-1, (ii) (d)(Sulphur mercaptan, percent m/m. (Defense requirements))	-	1900	-
Amendment No.5 Table 3 Clause G-2.5 iv(Volatility- Distillation-T50 to T10, ℃)	-	2650	-
Amendment No.5 Table 3 Clause G-2.5 iv(Volatility- Distillation-T90 to T10, ℃)	-	2650	-
Amendment No.5 Table 3 Clause G-2.5 ii(Fluidity-Freezing point)	-	2270	-
Amendment No.5 Table 3 Clause G-2.5 ii(Fluidity-Viscosity at - 40 ℃)	-	2270	-
Amendment No.5 Table 3 Clause G-2.5 iii(Aromatics)	-	2650	-

04 Dec, 2028

-
Amendment No.5 Table 3 Clause G-2.5 i (Annex B VTR) Amendment No.5 Table 3 Clause G-2.5 i (Annex C ITR or Annex D ETR, average over an area of 2.5 mm2) Amendment No.5 Table 3 Clause G-2.5 i (Pressure differential) Amendment No.5 Table 3 Clause G-2.5 i (Test temperature for 2.5 h) Amendment No.5 Table 3 Clause G-2.5 i (Thermal stability) Amendment No.5 Table 3 Clause G-2.5 i (Tube Rating) Amendment No.5 Table 3 Clause G-2.5 v (Lubricity) Amendment No.5 Table 3 Clause G-2.5 vi (Unconverted fatty acid esters and fatty acids) Cl-3.1 (General-Material) Cl-3.2 (Composition) Cl-3.2.1 (Antioxidants) Cl-3.2.2 (Metal Deactivator Additive (MDA)) Cl-3.2.2, 3.2.6, Table- 1, (xi) (Lubricity: Wear scar diameter, mm (defense requirements)) Cl-3.2.2, 3.2.6, Table- 1, (xi) (Lubricity: Wear scar diameter, mm, Max) Cl-3.2.2, 3.2.6, Table-1 (c) (Particulate contamination, at point of 1.02) manufacture, mg/l, Max) Cl-3.2.2, 3.2.6, Table-1 (d) 1) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥ 4 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 2) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥6 μm(c) Cl-3.2.2, 3.2.6, Table-1 (d) 3) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥14 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 4) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥21 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 5) (Particulate, at point of manufacture, cumulative channel particle counts:-≥25 μm©) Cl-3.2.2, 3.2.6, Table-1 (d) 6) (Particulate, at point of manufacture, cumulative channel particle counts:- ≥30 μm©) Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 1) ("Refining components, at the point of manufacture8) :- Non Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 2) ("Refining components, at the point of manufacture8) :- Mildly Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 3) ("Refining components, at the point of manufacture8) :- Severely Hydro processed Components, percent v/v") Cl-3.2.2, 3.2.6, Table-1, (ii) (f), 4) ("Refining components, at the point of manufacture8) :- Synthetic Components, percenvt/ v") Cl-3.2.2, 3.2.6, Table-1, (ix) b), 1) ("Micro-separometer rating18) at the point of manufacture: - MSEP without SDA, Min") Cl-3.2.2, 3.2.6, Table-1, (ix) b), 2) ("Micro-separometer rating18) at the point of manufacture: MSEP with SDA, Min") Cl-3.2.2, 3.2.6, Table-1, (vii) (a) (Filter pressure differential, mm Hg, Max) Cl-3.2.2, 3.2.6, Table-1, (vii) (b) 1) (Tube rating, visual (VTR)) Cl-3.2.2, 3.2.6, Table-1, (vii) (b) 2) (ITR or ETR, average over area of 2.5 mm2 in nm) Cl-3.2.2, 3.2.6, Table-1, (xii) (Identified Incidental Materials :- Fatty Acid Methyl Ester, mg/kg, Max) Cl-3.2.3 (Static Dissipater Additive (SDA)) Cl-3.2.4 (Lubricity Improver Additive (LIA)) Cl-3.2.5 (Fuel System Icing Inhibitor (FSII)) Cl-3.2.7 (Leak Detection Additive) Cl-5.2 (Marking)

2525

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 996 (2025)

SINGLE PHASE ac INDUCTION MOTORS FOR GENERAL PURPOSE (Fouth Revision)

SINGLE PHASE ac INDUCTION MOTORS FOR GENERAL PURPOSE

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7(Dimensions)	-	1000	-
Cl-9.1(Mounting)	-	100	-
Cl-9.2(Terminal Box)	-	100	-
Cl-9.3(Mounting Constructions)	-	100	-
Cl-9.3(Mounting Constructions)	-	100	-
Cl-9.4(Constructional Features)	-	300	-
Cl-9.5(Earthing)	-	100	-
Cl-10.1(Enclosures)	-	1200	-
Cl-12.1(Torques)	-	4000	-
Cl-12.1.2(Momentary overload test)	-	1000	-
Cl-12.2(Temperature Rise)	-	1500	-
Cl-12.3(Short Time Rating)	-	100	-
Cl-12.4(Method of Testing)	-	500	-
Cl-12.5(Performance Values)	-	2000	-
Cl-12.6(Limits of Vibration Severity)	-	600	-
Cl-12.7(Insulation Resistance)	-	600	-
Cl-13.1(High Voltage Values)	-	600	-
Cl-13.2(Moisture Proofness)	-	2000	-
Cl-13.3(Leakage Current)	-	600	-
Cl-14(Winding Resistance Measurement)	-	200	-
Cl-15(REDUCED VOLTAGE RUNNING UP TEST AT NO LOAD)	-	500	-
Cl-16(NOISE LEVEL)	-	600	-
Cl-17(OVER SPEED TEST)	-	600	-
Cl-18(TERMINAL MARKING)	-	100	-
Cl-12.1.1(Test for torues at rated voltage and frequency)	-	3000	-
Cl-12.1.1(Pull up Torque at rated voltage and frequency)	-	1000	-
Cl-12.1.1(Test for breakaway starting current at rated voltage and frequency)	-	1000	-
Cl-12.1.2(Breakaway (starting) torque at rated voltage and frequency)	-	1000	-
Cl-12.5.1(Test for full-load performance at rated voltage and frequency)	-	2000	-
Cl-21.5(Acceptance Tests)	-	5000	-

31 Dec, 2026

-
Included w.e.f 18.11.2025

2526

Indian Oil Corporation Ltd (IOCL), Vijayawada Smart Laboratory

6191014

IS 1460 (2025)

Automotive Diesel Fuel - Specification (seventh revision)

21350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1.4 , 3.2, Table-1 (i)(Appearance)	-	200	Excluding Tax
Cl-3.1.4 , 3.2, Table-1 (vi)(Cetane index, Min)	-	3770	(Includes Density and Distillation test charges) Excluding Tax
Cl-3.1.4 , 3.2, Table-1 (vii) (a)(Pour point3, °C, Max: Winter)	-	1900	Excluding Tax
Cl-3.1.4 , 3.2, Table-1 (vii) (b)(Pour point3, °C, Max: Summer)	-	1900	Excluding Tax
Cl-3.1.4 , 3.2, Table-1 (viii)(Copper strip corrosion for 3 h at 50 °C, Max)	-	1130	Excluding Tax
Cl-3.1.4 , 3.2, Table-1 (ix)(Distillation, 95 percent v/v recovery, °C, Max)	-	2650	Excluding Tax
Cl-3.1.4 , 3.2, Table-1 (x)(Flash point, Abel4, °C, Min)	-	1900	Excluding Tax
Cl-3.1.4 , 3.2, Table-1 (xi)(Kinematic viscosity, mm2/s, at 40 °C)	-	2270	Excluding Tax
Cl-3.1.4 , 3.2, Table-1 (xiii)(Density at 15 °C, kg/m3)	-	1130	Excluding Tax
Cl-3.1.4 , 3.2, Table-1 (xiv)(Total sulphur, mg/kg, Max)	-	4710	Excluding Tax
Cl-3.1.4 , 3.2, Table-1 (xxi)(FAME content7, percent v/v, Max)	-	5470	Excluding Tax

17 Nov, 2028

-
Excluding: Cl-3.1 (General- Requirements) Cl-3.2 (Composition) Cl-3.1.4 , 3.2, Table-1 (ii) C (Total Acid Number (TAN), mg of KOH/g, Max) Total Acid Number (TAN), mg of KOH/g, Max Cl-3.1.4 , 3.2, Table-1 (iii) (Ash, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (iv) (Carbon residue, on 10 percent residue, percent by mass, Max) Carbon residue, on 10 percent residue1, percent by mass, Max Cl-3.1.4 , 3.2, Table-1 (v) (Cetane number, Min) Cl-3.1.4 , 3.2, Table-1 (xii) (Total contamination, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xv) (Water content, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xvi) (a) (Cold Filter Plugging Point (CFPP)3, °C, Max: Winter) Cl-3.1.4 , 3.2, Table-1 (xvi) (b) (Cold Filter Plugging Point (CFPP)3, °C, Max: Summer) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, g/m3, Max) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), hours, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xix) (Polycyclic Aromatic Hydrocarbon (PAH), percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (xx) (Lubricity, wear scar diameter (wsd) at 60 ºC, μm, Max) Cl-5.2 (Marking)

2527

Delta Testing and Research Laboratories Private Limited (Unit II)

8186836

IS 4246 (2025)

DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision )

All type of Grade / Type / Size / Designation etc

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General - IS 4246 : 2025)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
4.1(General - IS 4246 : 2025)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
4.1.1(General - IS 4246 : 2025)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5(Materials - Cl. 5 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.1.1(Materials - Toughened glass, if provided,)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.1.1(Materials - Toughened glass, if provided,)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.1.1(Materials - Toughened glass, if provided,)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.1.1(Materials - Toughened glass, if provided,)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.1.1(Materials - Toughened glass, if provided,)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.1.1(Materials - Toughened glass, if provided,)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.1.1(Materials - Toughened glass, if provided,)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.1.1(Materials - Toughened glass, if provided,)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.1.1(Materials - Toughened glass, if provided,)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.1(Materials - IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.1(Materials - IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.1.1(Materials - IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.1.1(Materials - IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.2(Materials - IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.2(Materials - IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.3(Materials - IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.5(Materials - IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.5(Materials - IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.5(Materials - IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
5.7(Materials - IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
6.1(Design for Maintainance)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
6.1(Design for Maintainance)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
6.2(Design for Maintainance)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
6.2(Design for Maintainance)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
6.3(Design for Maintainance)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
6.4(Design for Maintainance)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
6.5(Design for Maintainance)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
6.6(Design for Maintainance)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
7.0(Rigidity and Stability)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
7.1(Rigidity and Stability)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
7.2(Rigidity and Stability)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
7.3(Rigidity and Stability)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
8.2(Workmanship and Finish -)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
8.3(Workmanship and Finish -)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
10(Injector Jets)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
10(Injector Jets)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
10(Injector Jets)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
10(Injector Jets)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
10(Injector Jets)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
10(Injector Jets)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
11.1(Burners- Cl. 10 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
11.1(Burners- Cl. 10 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
11.1(Burners- Cl. 10 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
11.1(Burners- Cl. 10 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
11.1(Burners- Cl. 10 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
11.2(Burners)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
11.3(Burners)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
11.4(Burners)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
12.1(Burner Pan Support)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
12.2(Burner Pan Support)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
12.3(Burner Pan Support)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
13,2(Gas Soundness Test)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
13.2(Gas Leak Detector)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.2(Gas Inlet Connection)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.2(Gas Inlet Connection)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.2(Gas Inlet Connection)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.2(Gas Inlet Connection)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.3(Gas Inlet Connection)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.4(Gas Inlet Connection)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
14.6(Gas Inlet Connection)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
15.0(Strength and Rigidity)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
15.0(Strength and Rigidity)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
15.0(Strength and Rigidity)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
15.0(Strength and Rigidity)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
17.0(Gas Consumption Test)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
17.0(Gas Consumption Test)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
17.0(Gas Consumption Test)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
17.0(Gas Consumption Test)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
17.0(Gas Consumption Test)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
17.0(Gas Consumption Test)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
17.2(Gas Consumption Test - For Gas Stoves)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
17.3(Gas Consumption Test - For Built in Hobs)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
17.3.1(Gas Consumption Test - For Built in Hobs)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
17.3.2(Gas Consumption Test - For Built in Hobs)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
18.1(Ignition and Flame Travel)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
18.1(Ignition and Flame Travel)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
18.2(Ignition and Flame Travel)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
18.3(Ignition and Flame Travel)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
19.1(Flame Stability)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
19.1.1(Flame Stability)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
19.2(Flame Stability)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
19.3(Flame Stability)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
20(Noise Control)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
21(Flash Back)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
22(Formation of Soot)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
23(Resistance to Draught)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
24.1(Combustion)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
24.1(Combustion)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
24.2(Combustion)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
25.1(Fire Hazard and Limiting Temperatures)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
25.1(Fire Hazard and Limiting Temperatures)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
25.1(Fire Hazard and Limiting Temperatures)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
25.1(Fire Hazard and Limiting Temperatures)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
25.2(Fire Hazard and Limiting Temperatures)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
26.1(Thermal Efficiency- Gas Stoves)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
26.1(Thermal Efficiency- Gas Stoves)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
26.1(Thermal Efficiency- Gas Stoves)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
26.1(Thermal Efficiency- Gas Stoves)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
26.1(Thermal Efficiency- Gas Stoves)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
26.2(Thermal Efficiency- For Built in Hobs)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
26.2(Thermal Efficiency- For Built in Hobs)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
26.2(Thermal Efficiency- For Built in Hobs)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
26.2(Thermal Efficiency- For Built in Hobs)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.
26.2(Thermal Efficiency- For Built in Hobs)	-	1000	10 % Discount for BIS for other 1.5 times of mentioned testing charges.

24 Jul, 2028

-
Included w.e.f. 06.11.2025

2528

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 16014 (2024)

MECHANICALLY WOVEN DOUBLE-TWISTED HEXAGONAL WIRE MESH GABIONS REVET MATTRESSES ROCK FALL NETTING AND OTHER PRODUCTS FOR CIVIL ENGINEERING PURPOSES GALVANIZED STEEL WIRE OR GALVANIZED STEEL WIRE WITH POLYMER COATING SPECIFICATION ( Second Revision )

Mechanically Woven, DoubleTwisted, Hexagonal Wire Mesh Gabions, Revet Mattresses, Rock Fall Netting and Other Products for Civil Engineering Purposes (Galvanized Steel Wire or Galvanized Steel Wire With Polymer Coating)

370000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Material and Manufacture)	-	370000	-
Cl-5.1.1(Class 1 double-twisted mesh)	-	370000	-
Cl-5.1.2(Class 2 double-twisted mesh)	-	370000	-
Cl-5.4.1(Galvanized Rings)	-	370000	-
Cl-5.4.2(Stainless Steel Fasteners)	-	370000	-
Cl-6.1(Tensile Strength)	-	370000	-
Cl-6.2, Table-7 (i)(Mesh wire dia, mm)	-	370000	-
Cl-6.2, Table-7 (ii)(Tensile Strength Parallel to twist, kN/m)	-	370000	-
Cl-5.3(Lacing wire and stiffeners)	-	370000	-
Cl-7.1.1(Mass of Zinc/Zinc Alloy Coating)	-	370000	-
Cl-7.1.2(Adhesion of Zinc/Zinc Alloy Coating)	-	370000	-
Cl-7.1.3(Ageing and Corrosion Resistance)	-	370000	-
Cl-7.2 (a)(Specific gravity)	-	370000	-
Cl-7.2 (b)(Tensile strength)	-	370000	-
Cl-7.2 (c)(Hardness)	-	370000	-
Cl-7.2 (d)(Resistance of polymer coating to sodium chloride solution)	-	370000	-
Cl-7.2 (e)(Salt spray exposure)	-	370000	-
Cl-7.2 (f)(Modulus of Elasticity)	-	370000	-
Cl-7.2 (g)(Brittleness Temperature)	-	370000	-
Cl-7.2 (h)(Resistance to UV rays)	-	370000	-
Cl-8.12(Mesh Opening Tolerances)	-	370000	-
Cl-9(Workmanship)	-	370000	-
Cl-12.1(Tensile Strength of Wire Mesh Panel)	-	370000	-
Cl-12.2(Punch Test)	-	370000	-
Cl-12.3(Pull-Apart Resistance Test/Selvedge Strength Test/Panel to Panel Connection)	-	370000	-
Cl-12.4(Metallic Coating Mass)	-	370000	-
Cl-12.5(Polymer Coating Thickness)	-	370000	-
Cl-12.6(Polymer Coating)	-	370000	-
Cl-12.7.1(Abrasion Resistance Test)	-	370000	-
Cl-12.7.2(Corrosion Spread Test)	-	370000	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (i)(Mesh wire dia, mm)	-	370000	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (ii)(Edge/Selvedge wire dia, mm)	-	370000	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (iii)(Lacing wire dia, mm)	-	370000	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (iv)(Polymer coating thickness,mm)	-	370000	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (v)(Typical sizes Length ×Width × Height(m))	-	370000	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (vi)(Tolerances in size of Units)	-	370000	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (i)(Mesh wire dia, mm)	-	370000	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (ii)(Edge/Selvedge wire dia, mm)	-	370000	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (iii)(Lacing wire dia, mm)	-	370000	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (iv)(Polymer coating thickness, mm)	-	370000	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (v)(Typical size Length × Width)	-	370000	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (vi)(Tolerances in size of netting rolls)	-	370000	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (i)(Mesh wire dia,)	-	370000	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (ii)(Tensile Strength Parallel to twist,)	-	370000	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (iii)(Tensile Strength Perpendicular to twist, kN/m)	-	370000	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (iv)(Selvedge Strength, kN/m)	-	370000	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (v)(Punch Strength, kN)	-	370000	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (vi)(Panel to panel connection(lacing wire/ fasteners), kN/m)	-	370000	-
Cl-13(Marking)	-	370000	-
Cl-5(Material and Manufacture)	-	-	-
Cl-5.1.1(Class 1 double-twisted mesh)	-	-	-
Cl-5.1.2(Class 2 double-twisted mesh)	-	-	-
Cl-5.4.1(Galvanized Rings)	-	-	-
Cl-5.4.2(Stainless Steel Fasteners)	-	-	-
Cl-6.1(Tensile Strength)	-	-	-
Cl-6.2, Table-7 (i)(Mesh wire dia, mm)	-	-	-
Cl-6.2, Table-7 (ii)(Tensile Strength Parallel to twist, kN/m)	-	-	-
Cl-5.3(Lacing wire and stiffeners)	-	-	-
Cl-7.1.1(Mass of Zinc/Zinc Alloy Coating)	-	-	-
Cl-7.1.2(Adhesion of Zinc/Zinc Alloy Coating)	-	-	-
Cl-7.1.3(Ageing and Corrosion Resistance)	-	-	-
Cl-7.2 (a)(Specific gravity)	-	-	-
Cl-7.2 (b)(Tensile strength)	-	-	-
Cl-7.2 (c)(Hardness)	-	-	-
Cl-7.2 (d)(Resistance of polymer coating to sodium chloride solution)	-	-	-
Cl-7.2 (e)(Salt spray exposure)	-	-	-
Cl-7.2 (f)(Modulus of Elasticity)	-	-	-
Cl-7.2 (g)(Brittleness Temperature)	-	-	-
Cl-7.2 (h)(Resistance to UV rays)	-	-	-
Cl-8.12(Mesh Opening Tolerances)	-	-	-
Cl-9(Workmanship)	-	-	-
Cl-12.1(Tensile Strength of Wire Mesh Panel)	-	-	-
Cl-12.2(Punch Test)	-	-	-
Cl-12.3(Pull-Apart Resistance Test/Selvedge Strength Test/Panel to Panel Connection)	-	-	-
Cl-12.4(Metallic Coating Mass)	-	-	-
Cl-12.5(Polymer Coating Thickness)	-	-	-
Cl-12.6(Polymer Coating)	-	-	-
Cl-12.7.1(Abrasion Resistance Test)	-	-	-
Cl-12.7.2(Corrosion Spread Test)	-	-	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (i)(Mesh wire dia, mm)	-	-	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (ii)(Edge/Selvedge wire dia, mm)	-	-	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (iii)(Lacing wire dia, mm)	-	-	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (iv)(Polymer coating thickness,mm)	-	-	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (v)(Typical sizes Length ×Width × Height(m))	-	-	-
Cl-5.5, 8.1, 8.2, 8.9, Table-1,2, 3, 4, 5, (vi)(Tolerances in size of Units)	-	-	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (i)(Mesh wire dia, mm)	-	-	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (ii)(Edge/Selvedge wire dia, mm)	-	-	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (iii)(Lacing wire dia, mm)	-	-	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (iv)(Polymer coating thickness, mm)	-	-	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (v)(Typical size Length × Width)	-	-	-
Cl-5.5, 8.1, 8.2, 8.11, Table-6 (vi)(Tolerances in size of netting rolls)	-	-	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (i)(Mesh wire dia,)	-	-	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (ii)(Tensile Strength Parallel to twist,)	-	-	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (iii)(Tensile Strength Perpendicular to twist, kN/m)	-	-	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (iv)(Selvedge Strength, kN/m)	-	-	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (v)(Punch Strength, kN)	-	-	-
Cl-6.2, 11.2, 12.2 (b), Table-7 (vi)(Panel to panel connection(lacing wire/ fasteners), kN/m)	-	-	-
Cl-13(Marking)	-	-	-

31 Dec, 2026

-
Included w.e.f 15.10.2025

2529

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 18256 (2023)

Solid Round Glass Fibre Reinforced Polymer (GFRP) Bars for Concrete Reinforcement - Specification

All type of Grade / Type / Size / Designation etc.

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(clause 5.1)(Fibre content (mass fraction))	-	10000	-
(clause 5.4.2)(Measured cross sectional area)	-	10000	-
(clause 6.1 and 8.2.3)(Ultimate Tensile force)	-	10000	-
(clause 6.2)(Tensile modulus of elasticity)	-	10000	-
(clause 6.4)(Transverse shear strength)	-	10000	-
(clause 6.5)(Bond Strength)	-	10000	-
(clause 7.1)("Moisture absorption (Short term & Long Term)")	-	10000	-
(clause 7.2)(Resistance to Alkaline Environment)	-	10000	-
(clause 8.2.4)(Guaranteed ultimate tensile force at 90 degree and tensile modulus of elasticity of bent bar)	-	10000	-
(clause 5.2)(Glass transition temperature)	-	0	-
(clause 5.3)(Degree of Cure)	-	0	-
(clause 6.6)(Fatigue Tensile Strength)	-	0	-
(clause 6.7)(Creep Failure)	-	0	-
(clause 7.3)(Longitudinal Wicking)	-	0	-
(clause 6.3)(Ultimate Tensile Strain)	-	10000	-
(Table 1)("Minimum bend radius in case of bent bars")	-	10000	-
(clause 5.1)(Fibre content (mass fraction))	-	10000	-
(clause 5.4.2)(Measured cross sectional area)	-	10000	-
(clause 6.1 and 8.2.3)(Ultimate Tensile force)	-	10000	-
(clause 6.2)(Tensile modulus of elasticity)	-	10000	-
(clause 6.4)(Transverse shear strength)	-	10000	-
(clause 6.5)(Bond Strength)	-	10000	-
(clause 7.1)("Moisture absorption (Short term & Long Term)")	-	10000	-
(clause 7.2)(Resistance to Alkaline Environment)	-	10000	-
(clause 8.2.4)(Guaranteed ultimate tensile force at 90 degree and tensile modulus of elasticity of bent bar)	-	10000	-
(clause 6.3)(Ultimate Tensile Strain)	-	10000	-
(Table 1)("Minimum bend radius in case of bent bars")	-	10000	-

21 Aug, 2027

-
"1 (clause 5.2) (Glass transition temperature) Glass transition temperature Equipment for the particular test is not available. 2 (clause 5.3) (Degree of Cure) Degree of Cure Equipment for the particular test is not available. 3 (clause 6.6) (Fatigue Tensile Strength) Fatigue Tensile Strength Equipment for the particular test is not available. 4 (clause 6.7) (Creep Failure) Creep Failure Equipment for the particular test is not available. 5 (clause 7.3) (Longitudinal Wicking) Longitudinal Wicking Equipment for the particular test is not available."

2530

TEKNOLAB QUALITY SERVICES PRIVATE LIMITED

8196926

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Protection against accidental contact with live parts)	-	2000	-
9(Terminals)	-	2000	-
10(PROVISION FOR EARTHING)	-	2000	-
11(MOISTURE RESISTANCE)	-	5000	-
12(Electric Strength)	-	2000	-
13(Thermal endurance test for winding of ballasts)	-	0	-
14(Fault conditions)	-	2000	-
15(Transformer heating)	-	5000	-
16(Construction)	-	1000	-
17(Creepage distance and clearances)	-	1000	-
18(Screws, current carrying parts and connections)	-	1000	-
19(Resistance to heat, fire and tracking)	-	5000	-
20(Resistance to corrosion)	-	1000	-
16(Enclosures)	-	0	-
16(Bridging resistor in primary circuit)	-	0	-
16(Capacitor and RC units)	-	0	-
16(RF suppression (X-Y capacitors))	-	0	-
16(Inductor)	-	0	-
16(MOV/VDR)	-	0	-
16(SMPS/Mains Transformer)	-	0	-
16(PCB material)	-	0	-
19(Metal base PCB for LED)	-	0	-
19(Transparent cover)	-	0	-
19(Bobbin)	-	0	-
16(Insulated tape)	-	0	-
16(Heat shrinkage sleeve)	-	0	-
19(Terminals)	-	0	-
16(Connector)	-	0	-
16(Fuse)	-	0	-
16(Internal wire)	-	0	-
16(LED)	-	0	-
16(Opto-coupler)	-	0	-
16(EMI/EMC filter)	-	0	-
16(Winding wire)	-	0	-
16(Thin sheet materials)	-	0	-
7(Marking)	-	0	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	0	-
9(TERMINALS)	-	0	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	0	-
11(MOISTURE RESISTANCE AND INSULATION)	-	0	-
12(ELECTRIC STRENGTH)	-	0	-
14(FAULT CONDITIONS)	-	0	-
15(TRANSFORMER HEATING)	-	0	-
16(CONSTRUCTION)	-	0	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	0	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	0	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	0	-
20(RESISTANCE TO CORROSION)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
6(CLASSIFICATION)	-	0	-
16(Opto-coupler)	-	0	-

20 Feb, 2029

-
Exclusion: 16 (Enclosures), 16 (Bridging resistor in primary circuit), 16 (Capacitor and RC units), 16 (RF suppression (X-Y capacitors)), 16 (Inductor), 16 (MOV/VDR), 16 (SMPS/Mains Transformer), 16 (PCB material), 19 (Metal base PCB for LED), 19 (Transparent cover), 19 (Bobbin), 16 (Insulated tape), 16 (Heat shrinkage sleeve), 19 (Terminals), 16 (Connector), 16 (Fuse), 16 (Internal wire), 16 (LED), 16 (Opto-coupler), 16 (EMI/EMC filter), 16 (Winding wire), 16 (Thin sheet materials)

2531

TEKNOLAB QUALITY SERVICES PRIVATE LIMITED

8196926

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	500	-
6.0(Marking)	-	2000	-
7.0(Construction)	-	4000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	1000	-
11.0(External & Internal Wiring)	-	1000	-
12.0(Protection against electric shock)	-	1500	-
13.0(Endurance Tests and Thermal Tests)	-	5000	-
14.0(Resistance to Dust & Moisture)	-	2000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	2000	-

20 Feb, 2029

-
Exclusion: 17.0 (Photometric Test), (Cl.4.24) (Annex-P) (UV Radiations for metal halide lamps), 4.26.2 (Short Circuit Protection)

2532

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 17012 (2018)

High ankle tactical boots with pu - Rubber sole - Specification

ALL

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuousness Test IS 17011)	-	1200	-
4.16.2(Breaking Strength of lace )	-	1000	-
4.16.1(Length of lace )	-	1000	-
4.15(D-ring & Hooks )	-	700	-
6.1(Resistance to Fuel Oil)	-	1200	-
4.14.9(Resistance to hot contact )	-	1200	-
4.14.8(Flexing resistance )	-	1200	-
4.14.7(Ageing test)	-	1000	-
4.14.6(Hardness (IRHD))	-	600	-
4.14.5(Abrasion resistance )	-	800	-
4.14.4(Tear Strength)	-	800	-
4.14.3(Sole Density )	-	700	-
4.14.2(Thickness)	-	500	-
4.14.1(Material)	-	500	-
4.13(Breaking Strength of thread )	-	700	-
4.12.2(Tear Strength)	-	900	-
4.12.1(Thickness )	-	500	-
4.11.2(Tear Strength)	-	1000	-
4.11.1(Thickness )	-	500	-
4.10.3(Water absorption & desorption percent)	-	900	-
4.10.2(Abrasion resistance )	-	1000	-
4.10.1(Material)	-	700	-
4.9.3(Water absorption & desorption percent)	-	600	-
4.9.2(Abrasion resistance )	-	700	-
4.9.1(Thickness)	-	500	-
4.8(Thickness Toe puff & counter stiffener)	-	1000	-
4.7.5(Water Vapour permeability & coefficient )	-	1200	-
4.7.4(Abrasion resistance )	-	1000	-
4.7.3(Tear Strength)	-	1000	-
4.7.2(Material Counter & Tongue)	-	1000	-
4.7.1(Material vamp & Quarter)	-	1000	-
4.6.3(Water Penetration and water absorption )	-	1000	-
4.6.2(Tear Strength)	-	1100	-
4.6.1(Thickness )	-	500	-
4.5.8(Energy absorption of seat region )	-	1200	-
4.5.7(Cold Insulation of sole complex)	-	1400	-
4.5.6(Heat Insulation of sole Complex)	-	1400	-
4.5.5(Antistatic test)	-	1400	-
4.5.4(Slip Resitance)	-	1300	-
4.5.3.2(Interayer bond strength)	-	1200	-
4.5.3.1(Upper/outsole bond strength)	-	1300	-
4.5.2(Ergonomic Feature)	-	1200	-
4.5.1(Construction)	-	1000	-
4.4(Height of upper )	-	700	-
4.3.2(Weight)	-	800	-
4.3.1(Size)	-	700	-
4.2(Design )	-	900	-
Cl. 6, Cl.6.1, 6.1.1 & 6.1.2, 8.6 of IS 15298 part 1,ISO 1817,ISO 4643,(Resistance to fuel oil)	-	1400	-
8, 8.1, 8.2, 8.2.1(Marking)	-	500	-
9(Information to be Supplied)	-	1000	-
Cl.4.6.4(Water Penetration and Water Absorption)	-	1200	-
Cl. 6, Cl.6.1, 6.1.1 & 6.1.2,(Resistance to fuel oil)	-	1400	-
CL.8,8.1, 8.2,8.2.1(Marking)	-	1000	-
Cl.9,(Information to be Supplied)	-	1200	-

-
Included w.e.f 08.12.2025

2533

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 4454 : Part 1 (2001)

Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	0	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	500	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	1000	-
Cl 8(Workmanship)	-	0	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	0	-
Cl 8(Workmanship)	-	0	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	0	-
7.1, 7.2(copper)	-	600	-
7.1, 7.2(Vanadium)	-	600	-
7.1, 7.2(phosphorus)	-	600	-
7.1, 7.2(sulphur)	-	600	-
7.1, 7.2(manganese)	-	600	-
7.1, 7.2(silicon )	-	600	-
7.1, 7.2(carbon)	-	600	-
7.1, 7.2(copper)	-	0	-
7.1, 7.2(Chromium)	-	600	-
7.1, 7.2(phosphorus)	-	0	-
7.1, 7.2(sulphur)	-	0	-
7.1, 7.2(manganese)	-	0	-
7.1, 7.2(silicon )	-	0	-
7.1, 7.2(carbon)	-	0	-
7.1, 7.2(copper)	-	0	-
7.1, 7.2(Chromium)	-	0	-
7.1, 7.2(phosphorus)	-	0	-
7.1, 7.2(sulphur)	-	0	-
7.1, 7.2(manganese)	-	0	-
7.1, 7.2(silicon )	-	0	-
7.1, 7.2(carbon)	-	0	-
7.1, 7.2(copper)	-	0	-
7.1, 7.2(Vanadium)	-	0	-
7.1, 7.2(Chromium)	-	0	-
7.1, 7.2(phosphorus)	-	0	-
7.1, 7.2(sulphur)	-	0	-
7.1, 7.2(manganese)	-	0	-
7.1, 7.2(silicon )	-	0	-
7.1, 7.2(carbon)	-	0	-
7.1, 7.2(copper)	-	0	-
7.1, 7.2(Vanadium)	-	0	-
7.1, 7.2(Chromium)	-	0	-
7.1, 7.2(phosphorus)	-	0	-
7.1, 7.2(sulphur)	-	0	-
7.1, 7.2(manganese)	-	0	-
7.1, 7.2(silicon )	-	0	-
7.1, 7.2(carbon)	-	0	-
7.1, 7.2(copper)	-	0	-
7.1, 7.2(Vanadium)	-	0	-
7.1, 7.2(Chromium)	-	0	-
7.1, 7.2(phosphorus)	-	0	-
7.1, 7.2(sulphur)	-	0	-
7.1, 7.2(manganese)	-	0	-
7.1, 7.2(silicon )	-	0	-
7.1, 7.2(carbon)	-	0	-
7.1, 7.2(copper)	-	0	-
7.1, 7.2(Vanadium)	-	0	-
7.1, 7.2(Chromium)	-	0	-
7.1, 7.2(phosphorus)	-	0	-
7.1, 7.2(sulphur)	-	0	-
7.1, 7.2(manganese)	-	0	-
7.1, 7.2(silicon )	-	0	-
7.1, 7.2(carbon)	-	0	-
7.1, 7.2(copper)	-	0	-
7.1, 7.2(Vanadium)	-	0	-
7.1, 7.2(Chromium)	-	0	-
7.1, 7.2(phosphorus)	-	0	-
7.1, 7.2(sulphur)	-	0	-
7.1, 7.2(manganese)	-	0	-
7.1, 7.2(silicon )	-	0	-
7.1, 7.2(carbon)	-	0	-
7.1, 7.2(copper)	-	0	-
7.1, 7.2(Vanadium)	-	0	-
7.1, 7.2(Chromium)	-	0	-
7.1, 7.2(phosphorus)	-	0	-
7.1, 7.2(sulphur)	-	0	-
7.1, 7.2(manganese)	-	0	-
7.1, 7.2(silicon )	-	0	-
7.1, 7.2(carbon)	-	0	-
7.1, 7.2(copper)	-	0	-
7.1, 7.2(phosphorus)	-	0	-
7.1, 7.2(sulphur)	-	0	-
7.1, 7.2(manganese)	-	0	-
7.1, 7.2(silicon )	-	0	-
7.1, 7.2(carbon)	-	0	-
7.1, 7.2(copper)	-	0	-
7.1, 7.2(phosphorus)	-	0	-
7.1, 7.2(sulphur)	-	0	-
7.1, 7.2(manganese)	-	0	-
7.1, 7.2(silicon )	-	0	-
7.1, 7.2(carbon)	-	0	-
7.1, 7.2(copper)	-	0	-
7.1, 7.2(phosphorus)	-	0	-
7.1, 7.2(sulphur)	-	0	-
7.1, 7.2(manganese)	-	0	-
7.1, 7.2(silicon )	-	0	-
7.1, 7.2(carbon)	-	0	-
7.1, 7.2(nitrogen)	-	600	-
7.1, 7.2(micro alloy)	-	0	-
7.1, 7.2(cu + cr+ni)	-	0	-
7.1, 7.2(sulphur + phosphorus)	-	0	-
7.1, 7.2(copper)	-	0	-
7.1, 7.2(phosphorus)	-	0	-
7.1, 7.2(sulphur)	-	0	-
7.1, 7.2(manganese)	-	0	-
7.1, 7.2(silicon )	-	0	-
7.1, 7.2(carbon)	-	0	-
7.1, 7.2(cu + cr + ni)	-	0	-
7.1, 7.2(sulphur + phosphorus)	-	0	-
7.1, 7.2(copper)	-	0	-
7.1, 7.2(phosphorus)	-	0	-
7.1, 7.2(sulphur)	-	0	-
7.1, 7.2(manganese)	-	0	-
7.1, 7.2(silicon )	-	0	-
7.1, 7.2(carbon)	-	0	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	0	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 8(Workmanship)	-	0	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	0	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	0	-
Cl 8(Workmanship)	-	0	-
11(Coating and surface finish)	-	500	-
11(Coating & Surface finish)	-	0	-
15(Marking)	-	100	-
8(Freedom from defects)	-	200	-
11(Surface finish)	-	0	-
15(Marking)	-	0	-
11(Coating & Surface finish)	-	0	-
15(Marking)	-	0	-
Cl 8(Workmanship)	-	-	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	-	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	-	-
Cl 8(Workmanship)	-	-	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	-	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	-	-
Cl 8(Workmanship)	-	-	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	-	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	-	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	-	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	-	-
Cl 8(Workmanship)	-	-	-
Cl 10(Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test & Decarburization Test)	-	-	-
Cl 9(Diameter & Difference Between Two Reading On Any Two Diameters)	-	-	-
Cl 8(Workmanship)	-	-	-
11(Coating and surface finish)	-	-	-
11(Coating & Surface finish)	-	-	-
15(Marking)	-	-	-
8(Freedom from defects)	-	-	-
11(Surface finish)	-	-	-
15(Marking)	-	-	-
11(Coating & Surface finish)	-	-	-
15(Marking)	-	-	-

-
Included w.e.f. 31.12.2025

2534

Indian Institute of Packaging (IIP), Mumbai

7118404

IS 14738 (2017)

Flexible intermediate bulk containers (Fibcs) - Specification (First Revision)

35164 View breakup
-

Clause No.	Exclusion	Remark
Cl-4.1(Materials)	-	-
Cl-4.1.3(Breaking force)	-	-
Cl-4.1.4(UV-resistance)	-	-
Cl-4.2(Construction)	-	-
Cl-4.3(Design)	-	-
Cl-5.1(Perfromance Test)	-	-
Cl-5.2(Selection of FIBC for Testing)	-	-
Cl-6.1(Cyclic Top Lift Test)	-	-
Cl-6.1.1.1(Heavy duty re-usable FIBC)	-	-
Cl-6.1.1.2(Standard duty re-usable FIBC)	-	-
Cl-6.1.1.3(Single-trip FIBC)	-	-
Cl-6.1.1.4(Criteria for Conformity)	-	-
Cl-6.2.1(Compression/Stacking Test- Applicability)	-	-
Cl-6.2.2(Calculation of the Superimposed Load)	-	-
Cl-6.2.3(Duration of the Test)	-	-
Cl-6.2.4(Criteria for Passing the Test)	-	-
Cl-8(Marking)	-	-
Cl-4.1(Materials)	-	-
Cl-4.1.3(Breaking force)	-	-
Cl-4.1.4(UV-resistance)	-	-
Cl-4.2(Construction)	-	-
Cl-4.3(Design)	-	-
Cl-5.1(Perfromance Test)	-	-
Cl-5.2(Selection of FIBC for Testing)	-	-
Cl-6.1(Cyclic Top Lift Test)	-	-
Cl-6.1.1.1(Heavy duty re-usable FIBC)	-	-
Cl-6.1.1.2(Standard duty re-usable FIBC)	-	-
Cl-6.1.1.3(Single-trip FIBC)	-	-
Cl-6.1.1.4(Criteria for Conformity)	-	-
Cl-6.2.1(Compression/Stacking Test- Applicability)	-	-
Cl-6.2.2(Calculation of the Superimposed Load)	-	-
Cl-6.2.3(Duration of the Test)	-	-
Cl-6.2.4(Criteria for Passing the Test)	-	-
Cl-8(Marking)	-	-

30 Jun, 2028

-
Included w.e.f 09.10.2025

2535

ACE TEST LAB PRIVATE LIMITED (8166826), DELHI

8166826

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

535000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.7.1(Specific gravity)	-	24300	-
Cl-4.1(Photovoltaic Energy System)	-	24300	-
Cl-4.2(Secondary Cells and Batteries)	-	24300	-
Cl-4.3(General Operating Conditions)	-	24300	-
Cl-4.3.8(Storage)	-	24300	-
Cl-4.3.9(Operating Temperature)	-	24300	-
Cl-5.1(Mechanical Endurance)	-	24300	-
Cl-5.2(Charge Efficiency)	-	24300	-
Cl-5.3(Deep Discharge Protection)	-	24300	-
Cl-5.4(Marking)	-	24300	-
Cl-5.5(Safety)	-	24300	-
Cl-5.6(Documentation)	-	24300	-
Cl-6(Functional characteristice)	-	24300	-
Cl-7(General test conditions)	-	24300	-
Cl-8.1(Capacity Test)	-	24300	-
Cl-8.2(Endurance Test)	-	24300	-
Cl-8.3(Charge Retention Test)	-	24300	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	24300	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	24300	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	24300	-
Cl-9.1(Type Tests)	-	24300	-
Cl-9.2(Acceptance Test)	-	24700	-
4.3.7.1(Specific gravity)	-	0	-
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	0	-
Cl-5.5(Safety)	-	0	-
Cl-5.6(Documentation)	-	0	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	0	-
Cl-8.2(Endurance Test)	-	0	-
Cl-8.3(Charge Retention Test)	-	0	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	0	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	0	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	0	-
Cl-9.1(Type Tests)	-	0	-
Cl-9.2(Acceptance Test)	-	0	-
4.3.7.1(Specific gravity)	-	0	-
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	0	-
Cl-5.5(Safety)	-	0	-
Cl-5.6(Documentation)	-	0	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	0	-
Cl-8.2(Endurance Test)	-	0	-
Cl-8.3(Charge Retention Test)	-	0	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	0	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	0	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	0	-
Cl-9.1(Type Tests)	-	0	-
Cl-9.2(Acceptance Test)	-	0	-
4.3.7.1(Specific gravity)	-	0	-
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	0	-
Cl-5.5(Safety)	-	0	-
Cl-5.6(Documentation)	-	0	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	0	-
Cl-8.2(Endurance Test)	-	0	-
Cl-8.3(Charge Retention Test)	-	0	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	0	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	0	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	0	-
Cl-9.1(Type Tests)	-	0	-
Cl-9.2(Acceptance Test)	-	0	-
4.3.7.1(Specific gravity)	-	0	-
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	0	-
Cl-5.5(Safety)	-	0	-
Cl-5.6(Documentation)	-	0	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	0	-
Cl-8.2(Endurance Test)	-	0	-
Cl-8.3(Charge Retention Test)	-	0	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	0	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	0	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	0	-
Cl-9.1(Type Tests)	-	0	-
Cl-9.2(Acceptance Test)	-	0	-

-
Included w.e.f. 12.11.2025

2536

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 13995 (1995)

Unlined moulded rubber boots - Specification

ALL

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.7(Size)	-	500	-
5.1.6(Design)	-	500	-
5.1.5(Flexing resistance of upper)	-	1000	-
5.1.4(Resistance to dry heat ageing )	-	1000	-
5.1.3(Tear Strength)	-	1000	-
5.1.2(Tensile Strength (after ageing))	-	1000	-
5.1.1(Tensile Strength (before ageing))	-	1000	-
4.1(Thickness )	-	500	-
6, 6.1(Marking)	-	500	-
Cl.6, 6.1(Marking)	-	500	-

-
Included w.e.f 08.12.2025

2537

MOTIHARI TERMINAL LABORATORY (IOCL)

9190914

IS 15607 (2022)

Biodiesel B-100 - Fatty Acid Methyl Esters FAME Specification Second Revision

19670 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4-Table 1-i)(Appearance, visual)	-	1130	-
4.4-Table 1-ii)(Colour, visual)	-	200	-
4.4-Table 1-iii)(Density at 15 °C, kg/m3)	-	1130	-
4.4-Table 1-iv)(Kinematic viscosity at 40 °C, cSt)	-	2270	-
4.4-Table 1-v)(Flash point (PMCC)1) °C, Min)	-	1900	-
4.4-Table 1-vi)(Total Sulphur, mg/kg, Max)	-	4710	-
4.4-Table 1-ix)(Water content mg/kg, Max)	-	4160	-
4.4-Table 1-xi)(Copper strip corrosion, 3 h at 50 °C, Max)	-	1130	-
4.4-Table 1-xiii)(Acid value, mg KOH/g, Max)	-	2270	-
4.4-Table 1-xxvi)(Cold filter plugging point (CFPP), °C Max a) summer 18 – Part 110 b) winter3))	-	1900	-

17 Nov, 2028

-
Exclusion: 4.4-Table 1-vii) (Carbon residue (MCR) 2) percent by mass, Max) 4.4-Table 1-viii) (Sulfated ash, percent by mass, Max) 4.4-Table 1-x) (Total contamination, mg/kg, Max) 4.4-Table 1-xii) (Cetane No., Min) 4.4-Table 1-xiv) (Methanol, percent by mass, Max) 4.4-Table 1-xix) (Free Glycerol percent by mass, Max) 4.4-Table 1-xv) (Ester content, percent by mass, Min) 4.4-Table 1-xvi) (Monoglycerides content, percent by mass, Max) 4.4-Table 1-xvii) (Diglyceride content, percent by mass, Max) 4.4-Table 1-xviii) (Triglyceride content, percent by mass, Max) 4.4-Table 1-xx) (Total Glycerol percent by mass, Max) 4.4-Table 1-xxi) (Phosphorous mg/kg, Max) 4.4-Table 1-xxii) (Sodium + Potassium mg/kg, Max) 4.4-Table 1-xxiii) (Calcium + Magnesium mg/kg, Max) 4.4-Table 1-xxiv) (Iodine value, gm iodine/100 gm, Max) 4.4-Table 1-xxv) (Oxidation stability, at 110 °C, Min hrs. Accelerated) 4.4-Table 1-xxvii) (Linolenic acid methyl ester, percent m/m, Max) 4.4-Table 1-xxviii) (Polyunsaturated (>_ 4 double bonds) methyl ester percent m/m, Max) 5.1 (Packing) 5.2 (Marking) 4.1 (General) 4.2 (Additives) 4.3 (The materials shall be free from grit)

2538

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 15558 (2024)

INSTANTANEOUS DOMESTIC WATER HEATER FOR USE WITH LPG SPECIFICATION First Revision of IS 15558

All

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	100	Complete Testing Charges-12500 GSTIN as per gvt rule 20% discount to BIS
Cl-5.1(water heater)	-	200	-
Cl-5.2(copper and copper alloy)	-	500	-
Cl-5.3(Non-metallic materials)	-	500	-
Cl-5.4(Mixing tube and burner head)	-	500	-
Cl-6.3(All Water connections)	-	200	-
Cl-6.4(water inlet and outlet connections)	-	200	-
Cl-6.6(Gas Inlet Connections)	-	250	-
Cl-7(Flame visibility)	-	400	-
Cl-8(Gas Taps)	-	200	-
Cl-9(Flame failuse device)	-	500	-
Cl-11(Protection against accidental overheating)	-	500	-
Cl-13(General condition of test)	-	0	-
Cl-14(Gas Soundness)	-	650	-
Cl-15(Water Soundness)	-	1000	-
Cl-16(Thermal efficiency)	-	1500	-
Cl-17(carbon monoxide/carbon dioxide)	-	500	-
Cl-18(Gas Consumption)	-	2000	-
Cl-19(Ignition and flame travel)	-	400	-
Cl-20(FLAME STABILITY)	-	200	-
Cl-21(NOISE CONTROL)	-	200	-
Cl-22(FLASH-BACK)	-	500	-
Cl-24("FIRE HAZARDS AND LIMITING TEMPERATURE")	-	500	-
Cl-25(TIME FOR TEMPERATURE RISE)	-	500	-
Cl-26(HOT WATER OUTPUT TEST)	-	500	-
Cl-4(General Requirements)	-	0	-
Cl-5.1(water heater)	-	0	-
Cl-5.2(copper and copper alloy)	-	0	-
Cl-5.3(Non-metallic materials)	-	0	-
Cl-5.4(Mixing tube and burner head)	-	0	-
Cl-6.3(All Water connections)	-	0	-
Cl-6.4(water inlet and outlet connections)	-	0	-
Cl-6.6(Gas Inlet Connections)	-	0	-
Cl-7(Flame visibility)	-	0	-
Cl-8(Gas Taps)	-	0	-
Cl-9(Flame failuse device)	-	0	-
Cl-11(Protection against accidental overheating)	-	0	-
Cl-13(General condition of test)	-	0	-
Cl-14(Gas Soundness)	-	0	-
Cl-15(Water Soundness)	-	0	-
Cl-16(Thermal efficiency)	-	0	-
Cl-17(carbon monoxide/carbon dioxide)	-	0	-
Cl-18(Gas Consumption)	-	0	-
Cl-19(Ignition and flame travel)	-	0	-
Cl-20(FLAME STABILITY)	-	0	-
Cl-21(NOISE CONTROL)	-	0	-
Cl-22(FLASH-BACK)	-	0	-
Cl-24("FIRE HAZARDS AND LIMITING TEMPERATURE")	-	0	-
Cl-25(TIME FOR TEMPERATURE RISE)	-	0	-
Cl-26(HOT WATER OUTPUT TEST)	-	0	-
Cl-4(General Requirements)	-	-	-
Cl-5.1(water heater)	-	-	-
Cl-5.2(copper and copper alloy)	-	-	-
Cl-5.3(Non-metallic materials)	-	-	-
Cl-5.4(Mixing tube and burner head)	-	-	-
Cl-6.3(All Water connections)	-	-	-
Cl-6.4(water inlet and outlet connections)	-	-	-
Cl-6.6(Gas Inlet Connections)	-	-	-
Cl-7(Flame visibility)	-	-	-
Cl-8(Gas Taps)	-	-	-
Cl-9(Flame failuse device)	-	-	-
Cl-11(Protection against accidental overheating)	-	-	-
Cl-13(General condition of test)	-	-	-
Cl-14(Gas Soundness)	-	-	-
Cl-15(Water Soundness)	-	-	-
Cl-16(Thermal efficiency)	-	-	-
Cl-17(carbon monoxide/carbon dioxide)	-	-	-
Cl-18(Gas Consumption)	-	-	-
Cl-19(Ignition and flame travel)	-	-	-
Cl-20(FLAME STABILITY)	-	-	-
Cl-21(NOISE CONTROL)	-	-	-
Cl-22(FLASH-BACK)	-	-	-
Cl-24("FIRE HAZARDS AND LIMITING TEMPERATURE")	-	-	-
Cl-25(TIME FOR TEMPERATURE RISE)	-	-	-
Cl-26(HOT WATER OUTPUT TEST)	-	-	-

12 Sep, 2028

-
Included w.e.f 12.11.2025

2539

INDIAN OIL CORPORATION LTD (IOCL) CENTRAL LAB

7193814

IS 16861 (2018)

High flash high speed diesel fuel - Specification

31590 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3-Table 1-i)(Appearance)	-	200	Testing charges as per year 2025-26
3.3-Table 1-ii)(Acid Number, mg KOH/g, Max)	-	2270	Testing charges as per year 2025-26
3.3-Table 1-iii)(Ash, percent by mass, Max)	-	2070	Testing charges as per year 2025-26
3.3-Table 1-iv)(Carbon residue on the 10 percent Volume Distillation Residue, mass %, Max)	-	1530	Testing charges as per year 2025-26
3.3-Table 1-v)(Cetane index1), Min)	-	3770	Testing charges as per year 2025-26
3.3-Table 1-vi)(Pour Point2), Max a) Winter b) Summer)	-	1900	Testing charges as per year 2025-26
3.3-Table 1-vii)(Copper strip Corrosion for 3 h at 100°C)	-	1130	Testing charges as per year 2025-26
3.3-Table 1-viii)(Distillation, percent (v/v), recovered a) at 350°C, Min b) at 370°C Min)	-	2650	Testing charges as per year 2025-26
3.3-Table 1-ix)(Flash Point Pensky Martens closed cup °C, Min)	-	1900	Testing charges as per year 2025-26
3.3-Table 1-x)(Kinematic viscosity, cSt, at 40°C)	-	2270	Testing charges as per year 2025-26
3.3-Table 1-xi)(Density3) at 15°C, kg/m3 , Max)	-	1130	Testing charges as per year 2025-26
3.3-Table 1-xii)(Total sulphur4), % by mass, Max)	-	4710	Testing charges as per year 2025-26
3.3-Table 1-xiii)(Water content, ppm, max.)	-	4160	Testing charges as per year 2025-26
3.3-Table 1-xiv)(Cold filter plugging point (CFPP), °C)	-	1900	Testing charges as per year 2025-26

16 Dec, 2028

-
Excluding: 3.1 (General) 3.2 (Composition) 3.3-Table 1-xv) (Oxidation Stability5), g/m3 , Max) 3.3-Table 1-xvi) (Lubricity6), Corrected WSD at 60°C, microns max) 5.1 (Packing) 5.2 (Marking)

2540

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 848 (2025)

Synthetic Resin Adhesives for Plywood (Phenolic, Aminoplastic and Bio-Materials Based) - Specification ( Third Revision )

MR/BWR/BWP

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4 Table 1(TYPES)	-	0	MR-7200/BWR-8000/BWP-8000 20% discount to BIS GSTIN as per govt rule
As per Clause 6.6(SETTING TIMES AND CONDITIONS)	-	0	-
As per Clause 7.3.2 Table 1(i)(Cyclic Test For BWP Type)	-	6000	-
As per Clause 7.3.2 Table 1(ii)(Cyclic Test For BWR Type)	-	6000	-
As per Clause 7.3.2 Table 1(iii)(Cyclic Test For MR Type)	-	5200	-
As per Clause 7.4(Acidity And Alkalinity (pH))	-	2000	-
As per Clause 9(Marking)	-	0	-

12 Sep, 2028

-
Included w.e.f. 04.11.2025

2541

MOTIHARI TERMINAL LABORATORY (IOCL)

9190914

IS 2796 (2017)

Motor gasoline - Specification (Sixth Revision)

12780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (i)(Appearance)	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a)("Colour: MG 91")	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iii)(Density at 15°C, kg/m³)	-	1130	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (b)(percent evaporated at 100°C (E 100 °C), percent v/v)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (c)(percent evaporated at 150°C (E 150 °C), percent v/v, Min)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (d)(Final boiling point, °C, Max)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e)(Residue, percent by volume, Max)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vii)(Gum content (Solvent washed), g/m3, Max)	-	2070	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (viii)(Total sulphur, mg/kg, Max)	-	4710	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiii)(Copper strip corrosion, for 3 h at 50°C, Max)	-	1130	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a) Motor gasoline)	-	690	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b)("Colour: MG 95")	-	200	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: E10)	-	2650	-
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a):- E10)	-	200	-

17 Nov, 2028

-
Exclusion: Cl-4.1 (General- Requirements) Cl-4.1.2 (Antioxidants) Cl-4.1.3 (Metal Deactivators) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (a) (Research octane number (RON), Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b) (Research octane number (RON), Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a) (Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b) (Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a) (Vapour lock index (VLI),Max :- MG (without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME) Cl-4.1.5 (Motor gasoline multifunctional additives (MFA),) Cl-4.2.1 (Organic Oxygenates- Permitted Components) Cl-4.3 (Other Requirements) Cl-5.2 (Markeing)

2542

INDIAN OIL CORPORATION LTD (IOCL) CENTRAL LAB

7193814

IS 15464 (2022)

ANHYDROUS ETHANOL FOR USE AS BLENDING COMPONENT IN MOTOR GASOLINE SPECIFICATION First Revision

64770 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Acidity)	-	400	Testing charges as per year 2025-26
4.4-Table 1-i)(Appearance)	-	200	Testing charges as per year 2025-26
4.4-Table 1-ii)(Relative density at 15.6/15.6 °C, Max)	-	1130	Testing charges as per year 2025-26
4.4-Table 1-iii)(Ethanol, percent, v/v, Min1)). (excluding denaturant))	-	1340	Testing charges as per year 2025-26
4.4-Table 1-iv)(Ethanol, percent, v/v, Min1). (excluding denaturant))	-	1340	Testing charges as per year 2025-26
4.4-Table 1-v)(Higher saturated alcohols (C3-C5), percent, v/v, Max)	-	8090	Testing charges as per year 2025-26
4.4-Table 1-vi)(Boiling point, °C, Min.)	-	2650	Testing charges as per year 2025-26
4.4-Table 1-vii)(Residue on evaporation, percent by mass, Max.)	-	1900	Testing charges as per year 2025-26
4.4-Table 1-viii)(Acidity (as CH3 COOH), mg/kg, Max.)	-	400	Testing charges as per year 2025-26
4.4-Table 1-ix)(Alkalinity, mg/kg, Max.)	-	400	Testing charges as per year 2025-26
4.4-Table 1-x)(Aldehyde (as CH3 CHO) content, mg/l, Max)	-	1900	Testing charges as per year 2025-26
4.4-Table 1-xi)(Electrical conductivity, µS/m, Max)	-	780	Testing charges as per year 2025-26
4.4-Table 1-xii)(Copper, mg/kg, Max.)	-	2270	Testing charges as per year 2025-26
4.4-Table 1-xiv)(Inorganic chloride, mg/kg, Max.)	-	8270	Testing charges as per year 2025-26
4.4-Table 1-xv)(Sulfur content, mg/kg, Max.)	-	4710	Testing charges as per year 2025-26
4.4-Table 1-xvi)(Sulphate content, mg/kg Max.)	-	8270	Testing charges as per year 2025-26
4.4-Table 1-xvii)(Water content, percent v/v, Max.)	-	4160	Testing charges as per year 2025-26
4.4-Table 1-xviii)(Hydrocarbons, percent v/v)	-	8090	Testing charges as per year 2025-26
4.4-Table 1-xix)(Miscibility with water)	-	380	Testing charges as per year 2025-26
4.4-Table 1 iv(Methanol)	-	8090	Testing charges as per year 2025-26

16 Dec, 2028

-
Excluding: 4.1 (Description) 4.2 (Denaturant) 5.1 (Packing) 5.2 (Marking) 4.4-Table 1-xiii) (pHe) 4.4-Table 1-xii) (Copper, mg/kg, Max.)

2543

INDIAN OIL CORPORATION LTD (IOCL) CENTRAL LAB

7193814

IS 15607 (2022)

Biodiesel B-100 - Fatty Acid Methyl Esters FAME Specification Second Revision

23840 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4-Table 1-i)(Appearance, visual)	-	200	-
4.4-Table 1-ii)(Colour, visual)	-	200	-
4.4-Table 1-iii)(Density at 15 °C, kg/m3)	-	1130	-
4.4-Table 1-iv)(Kinematic viscosity at 40 °C, cSt)	-	2270	-
4.4-Table 1-v)(Flash point (PMCC)1) °C, Min)	-	1900	-
4.4-Table 1-vi)(Total Sulphur, mg/kg, Max)	-	4710	-
4.4-Table 1-vii)(Carbon residue (MCR) 2) percent by mass, Max)	-	1900	-
4.4-Table 1-viii)(Sulfated ash, percent by mass, Max)	-	2070	-
4.4-Table 1-ix)(Water content mg/kg, Max)	-	4160	-
4.4-Table 1-xi)(Copper strip corrosion, 3 h at 50 °C, Max)	-	1130	-
4.4-Table 1-xiii)(Acid value, mg KOH/g, Max)	-	2270	-
4.4-Table 1-xxvi)(Cold filter plugging point (CFPP), °C Max a) summer 18 – Part 110 b) winter3))	-	1900	-

16 Dec, 2028

-
Excluding: 4.1 (General) 4.2 (Additives) 4.3 (The materials shall be free from grit) 4.4-Table 1-x) (Total contamination, mg/kg, Max) 4.4-Table 1-xii) (Cetane No., Min) 4.4-Table 1-xiv) (Methanol, percent by mass, Max) 4.4-Table 1-xv) (Ester content, percent by mass, Min) 4.4-Table 1-xvi) (Monoglycerides content, percent by mass, Max) 4.4-Table 1-xvii) (Diglyceride content, percent by mass, Max) 4.4-Table 1-xviii) (Triglyceride content, percent by mass, Max) 4.4-Table 1-xx) (Total Glycerol percent by mass, Max) 4.4-Table 1-xix) (Free Glycerol percent by mass, Max) 4.4-Table 1-xxi) (Phosphorous mg/kg, Max) 4.4-Table 1-xxii) (Sodium + Potassium mg/kg, Max) 4.4-Table 1-xxiii) (Calcium + Magnesium mg/kg, Max) 4.4-Table 1-xxiv) (Iodine value, gm iodine/100 gm, Max) 4.4-Table 1-xxiv) (Iodine value, gm iodine/100 gm, Max) 4.4-Table 1-xxv) (Oxidation stability, at 110 °C, Min hrs. Accelerated) 4.4-Table 1-xxvii) (Linolenic acid methyl ester, percent m/m, Max) 4.4-Table 1-xxviii) (Polyunsaturated (>_ 4 double bonds) methyl ester percent m/m, Max) 5.1 (Packing) 5.2 (Marking)

2544

INDIAN OIL CORPORATION LTD (IOCL) CENTRAL LAB

7193814

IS 17821 (2022)

ETHANOL AS A FUEL FOR USE IN POSITIVE IGNITION ENGINE POWERED VEHICLES SPECIFICATION

88910 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Acidity)	-	400	-
4.4-Table 1-i)(Appearance)	-	200	-
4.4-Table 1-ii)(Relative density at 15.6/15.6 °C)	-	1130	-
4.4-Table 1-iii)(Ethanol, percent1) v/v)	-	8090	-
4.4-Table 1-iv)(Methanol, percent v/v, Max.)	-	8090	-
4.4-Table 1-v)(Higher saturated alcohols2) (C3-C5), percent v/v, Max.)	-	8090	-
4.4-Table 1-vi)(Distillation, °C, Min. a) Initial boiling point b) 95 percent volume recovery c) Final boiling point d) Residue, percent by volume, Max)	-	2650	-
4.4-Table 1-vii)(Residue on evaporation, percent by mass, Max.)	-	1900	-
4.4-Table 1-ix)(Alkalinity, mg/l, Max.)	-	400	-
4.4-Table 1-viii)(Acidity (as CH3 COOH), mg/l, Max)	-	400	-
4.4-Table 1-x)(Aldehyde (as CH3 CHO) content, mg/l, Max.)	-	1900	-
4.4-Table 1-xi)(Electrical conductivity, µS/m, Max.)	-	780	-
4.4-Table 1-xv)(Sulphur content, mg/kg, Max.)	-	4710	-
4.4-Table 1-xvii)(Water content3), percent, v/v Max.)	-	4160	-
4.4-Table 1-xviii)(Gasoline4), percent v/v)	-	27200	-
4.4-Table 1-xvi)(Sulphate content, mg/kg Max.)	-	8270	-
4.4-Table 1-xiv)(Inorganic chloride, mg/kg, Max.)	-	8270	-
4.4-Table 1-xii)(Copper, mg/kg, Max.)	-	2270	-

16 Dec, 2028

-
Excluding: 4.4-Table 1-xviii) (Gasoline), percent v/v) 4.4-Table 1-xii) (Copper, mg/kg, Max.) 4.1 (Description) 4.2 (Denaturant) 4.4-Table 1-xiii) (pHe)) 5.1 (Packing) 5.2 (Marking) 7.1 (Tests shall be conducted)

2545

BIS, Southern Regional Laboratory (SRL)

None

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.5 (Oxidation Induction Time)	-
8.9 table-6 (Elongation at Break)	-
8.7 (Density)	-
8.4 ( Melt Flow Rate)	-
8.9,T6 ("Tensile - IS 4984-2016 (Annexure-H)")	-
CL 7.4 (Wall Thickness (Take 8 reading & Minimum and Maximum reported))	-
Cl. 8.3 (Carbon Black Content)	-
Cl. 8.3 (Carbon Black Dispersion)	-

-
-

2546

INDIAN OIL CORPORATION LTD (IOCL) CENTRAL LAB

7193814

IS 1593 (2018)

Fuel oils - Specification (Third Revision)

18060 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Pour Point)	-	1900	Testing Charges as per year 2025-26
4.6-Table 1-i)(Acidity, inorganic)	-	960	Testing Charges as per year 2025-26
4.6-Table 1-ii)(Ash, percent by mass, Max)	-	2070	Testing Charges as per year 2025-26
4.6-Table 1-iii)(Carbon residue, mass percent, Max)	-	1530	Testing Charges as per year 2025-26
4.6-Table 1-iv)(Gross, calorific value)	-	780	Testing Charges as per year 2025-26
4.6-Table 1-v)(Density at 15°C kg/m3or Relative density at 15.6/15.6°C)	-	1130	Testing Charges as per year 2025-26
4.6-Table 1-vi)(Flash point (Pensky Martens (closed), °C, Min)	-	1900	Testing Charges as per year 2025-26
4.6-Table 1-vii)(Kinematic viscosity in centistokes at 50°C)	-	2270	Testing Charges as per year 2025-26
4.6-Table 1-viii)(Sediment, percent by mass, Max)	-	1740	Testing Charges as per year 2025-26
4.6-Table 1-ix)(Sulphur, total, percent by mass, Max2))	-	2650	Testing Charges as per year 2025-26
4.6-Table 1-x)(Water content, percent by volume, Max)	-	1130	Testing Charges as per year 2025-26

16 Dec, 2028

-
Excluding: 4.1 (General) 4.3 (Asphaltene Content) 4.4 (TOTAL SEDIMENT) 5.1 (Packing) 5.2 (Marking) 4.5 (Spot Test)

2547

CIPET, Madurai

6139834

IS 16098 Part 2 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

75 MM -400 MM

50338 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 Table-10 (i)(Ring Stiffness)	-	1100.00	25% Discount on Testing Charges for BIS
Table -1 Cl. No. 5.1, i)(Base Density)	-	500.00	25% Discount on Testing Charges for BIS
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	1100.00	25% Discount on Testing Charges for BIS
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	2200.00	25% Discount on Testing Charges for BIS
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	1100.00	25% Discount on Testing Charges for BIS Speciemn Prepation Charges : Rs. 300/-
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	4800.00	25% Discount on Testing Charges for BIS
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	11000.00	25% Discount on Testing Charges for BIS
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	1100.00	25% Discount on Testing Charges for BIS
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	500.00	25% Discount on Testing Charges for BIS (All Dimension)
6.3.2(Length of Pipe)	-	500.00	25% Discount on Testing Charges for BIS (All Dimension)
8.1.1 Table-10 (iv)(Creep ratio)	-	1100.00	25% Discount on Testing Charges for BIS Specimen Prepation Charges : Rs. 25500/-
6.3.3(Out Side Diameter)	-	500.00	25% Discount on Testing Charges for BIS (All Dimension)
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	1100.00	25% Discount on Testing Charges for BIS Specimen Prepation Charges : Rs. 500/-
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	1100.00	25% Discount on Testing Charges for BIS
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	1100.00	25% Discount on Testing Charges for BIS
6.3.5.2(Wall Thickness(e4 min))	-	500.00	25% Discount on Testing Charges for BIS
9 Table 12 (ii)(Water tightness)	-	1000.00	25% Discount on Testing Charges for BIS
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	300.00	25% Discount on Testing Charges for BIS
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	15000.00	25% Discount on Testing Charges for BIS Specimen Preparation : 5000.00
7.1(Appearance)	-	300.00	25% Discount on Testing Charges for BIS
7.1.1(Color of Finished Pipes)	-	30.00	25% Discount on Testing Charges for BIS 70
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	700.00	25% Discount on Testing Charges for BIS
8.1.1 Table-10 (i)(Ring Stiffness)	-	1100.00	25% Discount on Testing Charges for BIS
Table -1 Cl. No. 5.1, i)(Base Density)	-	500.00	25% Discount on Testing Charges for BIS
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	1100.00	25% Discount on Testing Charges for BIS
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	2200.00	25% Discount on Testing Charges for BIS
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	1100.00	25% Discount on Testing Charges for BIS Specimen Preparation : 300/-
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	4800.00	25% Discount on Testing Charges for BIS
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	11000.00	25% Discount on Testing Charges for BIS
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	1100.00	25% Discount on Testing Charges for BIS
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	500.00	25% Discount on Testing Charges for BIS (All Dimension)
6.3.2(Length of Pipe)	-	500.00	25% Discount on Testing Charges for BIS (All Dimension)
8.1.1 Table-10 (iv)(Creep ratio)	-	1100.00	25% Discount on Testing Charges for BIS Specimen Preparation : 25500/-
6.3.3(Out Side Diameter)	-	500.00	25% Discount on Testing Charges for BIS (All Dimension)
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	1100.00	25% Discount on Testing Charges for BIS Specimen Preparation : 500/-
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	500.00	25% Discount on Testing Charges for BIS (All Dimension)
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	1000.00	25% Discount on Testing Charges for BIS
6.3.5.2(Wall Thickness(e4 min))	-	500.00	25% Discount on Testing Charges for BIS (All Dimension)
9 Table 12 (ii)(Water tightness)	-	1000.00	25% Discount on Testing Charges for BIS
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	500.00	25% Discount on Testing Charges for BIS
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	15000.00	25% Discount on Testing Charges for BIS Specimen Charges : 5000.00
7.1(Appearance)	-	300.00	25% Discount on Testing Charges for BIS
7.1.1(Color of Finished Pipes)	-	300.00	25% Discount on Testing Charges for BIS
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	700.00	25% Discount on Testing Charges for BIS

22 May, 2027

-
Included w.e.f.08.10.2025

2548

MOTIHARI TERMINAL LABORATORY (IOCL)

9190914

IS 1460 (2025)

Automotive Diesel Fuel - Specification (seventh revision)

19660 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1.4 , 3.2, Table-1 (x)(Flash point, Abel4, °C, Min)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (ii) C(Total Acid Number (TAN), mg of KOH/g, Max)	-	960	-
Cl-3.1.4 , 3.2, Table-1 (vi)(Cetane index, Min)	-	3770	-
Cl-3.1.4 , 3.2, Table-1 (i)(Appearance)	-	200	-
Cl-3.1.4 , 3.2, Table-1 (xiii)(Density at 15 °C, kg/m3)	-	1130	-
Cl-3.1.4 , 3.2, Table-1 (xvi) (a)(Cold Filter Plugging Point (CFPP)3, °C, Max: Winter)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (xvi) (b)(Cold Filter Plugging Point (CFPP)3, °C, Max: Summer)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (ix)(Distillation, 95 percent v/v recovery, °C, Max)	-	2650	-
Cl-3.1.4 , 3.2, Table-1 (viii)(Copper strip corrosion for 3 h at 50 °C, Max)	-	1130	-
Cl-3.1.4 , 3.2, Table-1 (xi)(Kinematic viscosity, mm2/s, at 40 °C)	-	2270	-
Cl-3.1.4 , 3.2, Table-1 (vii) (a)(Pour point3, °C, Max: Winter)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (vii) (b)(Pour point3, °C, Max: Summer)	-	1900	-
Cl-3.1.4 , 3.2, Table-1 (xiv)(Total sulphur, mg/kg, Max)	-	4710	-
Cl-3.1.4 , 3.2, Table-1 (xv)(Water content, mg/kg, Max)	-	4160	-

17 Nov, 2028

-
Exclusion: Cl-3.1 (General- Requirements) Cl-3.1.4 , 3.2, Table-1 (iii) (Ash, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (iv) (Carbon residue, on 10 percent residue1, percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (v) (Cetane number, Min) Cl-3.1.4 , 3.2, Table-1 (xii) (Total contamination, mg/kg, Max) Cl-3.1.4 , 3.2, Table-1 (xix) (Polycyclic Aromatic Hydrocarbon (PAH), percent by mass, Max) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, g/m3, Max) Cl-3.1.4 , 3.2, Table-1 (xvii) (Oxidation stability6, minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), hours, Min) Cl-3.1.4 , 3.2, Table-1 (xviii) (Oxidation stability (for diesel fuel having FAME content of above 2 percent v/v), minutes, Min) Cl-3.1.4 , 3.2, Table-1 (xx) (Lubricity, wear scar diameter (wsd) at 60 ºC, μm, Max) Cl-3.1.4 , 3.2, Table-1 (xxi) (FAME content7, percent v/v, Max) Cl-3.2 (Composition) Cl-5.2 (Marking)

2549

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

8141226

IS 4246 (2025)

DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision )

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General - IS 4246 : 2025)	-	200	-
4.1(General - IS 4246 : 2025)	-	200	-
4.1.1(General - IS 4246 : 2025)	-	200	-
5(Materials - Cl. 5 of IS 5116)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1(Materials - IS 5116)	-	500	-
5.1(Materials - IS 5116)	-	500	-
5.1.1(Materials - IS 5116)	-	500	-
5.1.1(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	500	-
5.3(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.7(Materials - IS 5116)	-	500	-
6.1(Design for Maintainance)	-	50	-
6.1(Design for Maintainance)	-	50	-
6.2(Design for Maintainance)	-	50	-
6.2(Design for Maintainance)	-	50	-
6.3(Design for Maintainance)	-	50	-
6.4(Design for Maintainance)	-	50	-
6.5(Design for Maintainance)	-	50	-
6.6(Design for Maintainance)	-	50	-
7.0(Rigidity and Stability)	-	50	-
7.1(Rigidity and Stability)	-	50	-
7.2(Rigidity and Stability)	-	50	-
7.3(Rigidity and Stability)	-	50	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	100	-
8.2(Workmanship and Finish -)	-	100	-
8.3(Workmanship and Finish -)	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	100	-
10(Injector Jets)	-	100	-
10(Injector Jets)	-	100	-
10(Injector Jets)	-	100	-
10(Injector Jets)	-	100	-
10(Injector Jets)	-	100	-
10(Injector Jets)	-	100	-
11.1(Burners- Cl. 10 of IS 5116)	-	50	-
11.1(Burners- Cl. 10 of IS 5116)	-	50	-
11.1(Burners- Cl. 10 of IS 5116)	-	50	-
11.1(Burners- Cl. 10 of IS 5116)	-	50	-
11.1(Burners- Cl. 10 of IS 5116)	-	50	-
11.2(Burners)	-	50	-
11.3(Burners)	-	50	-
11.4(Burners)	-	50	-
12.1(Burner Pan Support)	-	50	-
12.2(Burner Pan Support)	-	50	-
12.3(Burner Pan Support)	-	50	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	200	-
13,2(Gas Soundness Test)	-	200	-
13.2(Gas Leak Detector)	-	200	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	50	-
14.2(Gas Inlet Connection)	-	50	-
14.2(Gas Inlet Connection)	-	50	-
14.2(Gas Inlet Connection)	-	50	-
14.2(Gas Inlet Connection)	-	50	-
14.3(Gas Inlet Connection)	-	50	-
14.4(Gas Inlet Connection)	-	50	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	50	-
14.6(Gas Inlet Connection)	-	50	-
15.0(Strength and Rigidity)	-	300	-
15.0(Strength and Rigidity)	-	300	-
15.0(Strength and Rigidity)	-	300	-
15.0(Strength and Rigidity)	-	300	-
17.0(Gas Consumption Test)	-	300	-
17.0(Gas Consumption Test)	-	300	-
17.0(Gas Consumption Test)	-	300	-
17.0(Gas Consumption Test)	-	300	-
17.0(Gas Consumption Test)	-	300	-
17.0(Gas Consumption Test)	-	300	-
17.2(Gas Consumption Test - For Gas Stoves)	-	300	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	300	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	300	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	300	-
17.3(Gas Consumption Test - For Built in Hobs)	-	300	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	300	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	300	-
18.1(Ignition and Flame Travel)	-	100	-
18.1(Ignition and Flame Travel)	-	100	-
18.2(Ignition and Flame Travel)	-	100	-
18.3(Ignition and Flame Travel)	-	100	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	100	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	100	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	100	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	100	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	100	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	100	-
19.1(Flame Stability)	-	100	-
19.1.1(Flame Stability)	-	100	-
19.2(Flame Stability)	-	100	-
19.3(Flame Stability)	-	100	-
20(Noise Control)	-	200	-
21(Flash Back)	-	200	-
22(Formation of Soot)	-	200	-
23(Resistance to Draught)	-	300	-
24.1(Combustion)	-	200	-
24.1(Combustion)	-	200	-
24.2(Combustion)	-	300	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.2(Fire Hazard and Limiting Temperatures)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2000	-
4.1(General - IS 4246 : 2025)	-	0	-
4.1(General - IS 4246 : 2025)	-	0	-
4.1.1(General - IS 4246 : 2025)	-	0	-
5(Materials - Cl. 5 of IS 5116)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1(Materials - IS 5116)	-	0	-
5.1(Materials - IS 5116)	-	0	-
5.1.1(Materials - IS 5116)	-	0	-
5.1.1(Materials - IS 5116)	-	0	-
5.2(Materials - IS 5116)	-	0	-
5.2(Materials - IS 5116)	-	0	-
5.3(Materials - IS 5116)	-	0	-
5.5(Materials - IS 5116)	-	0	-
5.5(Materials - IS 5116)	-	0	-
5.5(Materials - IS 5116)	-	0	-
5.7(Materials - IS 5116)	-	0	-
6.1(Design for Maintainance)	-	0	-
6.1(Design for Maintainance)	-	0	-
6.2(Design for Maintainance)	-	0	-
6.2(Design for Maintainance)	-	0	-
6.3(Design for Maintainance)	-	0	-
6.4(Design for Maintainance)	-	0	-
6.5(Design for Maintainance)	-	0	-
6.6(Design for Maintainance)	-	0	-
7.0(Rigidity and Stability)	-	0	-
7.1(Rigidity and Stability)	-	0	-
7.2(Rigidity and Stability)	-	0	-
7.3(Rigidity and Stability)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.2(Workmanship and Finish -)	-	0	-
8.3(Workmanship and Finish -)	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.2(Burners)	-	0	-
11.3(Burners)	-	0	-
11.4(Burners)	-	0	-
12.1(Burner Pan Support)	-	0	-
12.2(Burner Pan Support)	-	0	-
12.3(Burner Pan Support)	-	0	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	0	-
13,2(Gas Soundness Test)	-	0	-
13.2(Gas Leak Detector)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.3(Gas Inlet Connection)	-	0	-
14.4(Gas Inlet Connection)	-	0	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	0	-
14.6(Gas Inlet Connection)	-	0	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.2(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.3(Gas Consumption Test - For Built in Hobs)	-	0	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	0	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	0	-
18.1(Ignition and Flame Travel)	-	0	-
18.1(Ignition and Flame Travel)	-	0	-
18.2(Ignition and Flame Travel)	-	0	-
18.3(Ignition and Flame Travel)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
19.1(Flame Stability)	-	0	-
19.1.1(Flame Stability)	-	0	-
19.2(Flame Stability)	-	0	-
19.3(Flame Stability)	-	0	-
20(Noise Control)	-	0	-
21(Flash Back)	-	0	-
22(Formation of Soot)	-	0	-
23(Resistance to Draught)	-	0	-
24.1(Combustion)	-	0	-
24.1(Combustion)	-	0	-
24.2(Combustion)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.2(Fire Hazard and Limiting Temperatures)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-

04 Jul, 2027

-
Included w.e.f 31.12.2025 "Exclusion 5.1.1 (Materials - Toughened glass, if provided,) "

2550

Indian Oil Corporation Ltd (IOCL), Vijayawada Smart Laboratory

6191014

IS 2796 (2017)

Motor gasoline - Specification (Sixth Revision)

30960 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (i)(Appearance)	-	200	Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), a)("Colour: MG 91")	-	200	Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ii), b)("Colour: MG 95")	-	200	Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iii)(Density at 15°C, kg/m³)	-	1130	Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: Motor gasoline)	-	2650	(Distillation Parameters as per IS2796 Specification) Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (b)(percent evaporated at 100°C (E 100 °C), percent v/v)	-	2650	(Distillation Parameters as per IS2796 Specification) Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (c)(percent evaporated at 150°C (E 150 °C), percent v/v, Min)	-	2650	(Distillation Parameters as per IS2796 Specification) Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (d)(Final boiling point, °C, Max)	-	2650	(Distillation Parameters as per IS2796 Specification) Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (e)(Residue, percent by volume, Max)	-	2650	(Distillation Parameters as per IS2796 Specification) Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (a)(Research octane number (RON), Min: MG 91)	-	18210	Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (v) (b)(Research octane number (RON), Min: MG 95)	-	18210	Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vii)(Gum content (Solvent washed), g/m3, Max)	-	2070	Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (viii)(Total sulphur, mg/kg, Max)	-	4710	Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiii)(Copper strip corrosion, for 3 h at 50°C, Max)	-	1130	Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a) Motor gasoline)	-	660	Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xx)(Ethanol content, percent by volume: a):- E10)	-	660	Excluding Tax
Cl-4.1.4, 4.2.2 & 4.4, Table-1 (iv) (a)(percent evaporated at 70°C (E 70°C), percent v/v: E10)	-	2650	(Distillation Parameters as per IS2796 Specification) Excluding Tax

17 Nov, 2028

-
Excluding: Cl-4.1 (General- Requirements) Cl-4.1.2 (Antioxidants) Cl-4.1.3 (Metal Deactivators) Cl-4.1.5 (Motor gasoline multifunctional additives (MFA) Cl-4.2.1 (Organic Oxygenates- Permitted Components) Cl-4.3 (Other Requirements) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (a) (Motor octane number (MON),Min: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (vi) (b) (Motor octane number (MON),Min: MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ix) (Lead content (as Pb ), g/l, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (a) (Reid vapour pressure (RVP) at 38°C, kPa , Max: MG(without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (x) (b) (Reid vapour pressure (RVP) at 38°C, kPa , Max: Ethanol blended MG) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (a) (Vapour lock index (VLI),Max :- MG (without ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (b) (Vapour lock index (VLI),Max :- MG (with 5 percent v/v ethanol)) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xi) (c) (Vapour lock index (VLI),Max :- E10) Vapour lock index (VLI),Max :- E10 15 Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xii) (Benzene content, percent by volume, Max) Benzene content, percent by volume 16 Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (a) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Winter, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xiv) (b) (Water tolerance of motor gasoline-alcohol blends, temperature for phase separation:- Other months, °C, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xv) (Engine intake system cleanliness) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (a) (Olefin content, percent by volume, Max: MG 91) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvi) (b) (Olefin content, percent by volume, Max :MG 95) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xvii) (Oxidation stability, minutes, Min) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (xviii) (Aromatics content, percent by volume, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (ixi) (Oxygen content, percent by mass, Max) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max:- Ethers containing 5 or more ‘C’ atoms per molecules such as MTBE, ETBE or TAME) Cl-4.1.4, 4.2.2 & 4.4, Table-1 (XXI) (Oxygenates percent by volume, Max) Cl-5.2 (Markeing)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number